diff -druN linux-libre-2.6.34-gnu/arch/alpha/include/asm/atomic.h linux-libre-2.6.35-gnu/arch/alpha/include/asm/atomic.h
--- linux-libre-2.6.34-gnu/arch/alpha/include/asm/atomic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/alpha/include/asm/atomic.h	2010-08-01 18:11:14.000000000 -0400
@@ -17,8 +17,8 @@
 #define ATOMIC_INIT(i)		( (atomic_t) { (i) } )
 #define ATOMIC64_INIT(i)	( (atomic64_t) { (i) } )
 
-#define atomic_read(v)		((v)->counter + 0)
-#define atomic64_read(v)	((v)->counter + 0)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
+#define atomic64_read(v)	(*(volatile long *)&(v)->counter)
 
 #define atomic_set(v,i)		((v)->counter = (i))
 #define atomic64_set(v,i)	((v)->counter = (i))
diff -druN linux-libre-2.6.34-gnu/arch/alpha/include/asm/bitops.h linux-libre-2.6.35-gnu/arch/alpha/include/asm/bitops.h
--- linux-libre-2.6.34-gnu/arch/alpha/include/asm/bitops.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/alpha/include/asm/bitops.h	2010-08-01 18:11:14.000000000 -0400
@@ -405,29 +405,31 @@
 
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 /* Whee.  EV67 can calculate it directly.  */
-static inline unsigned long hweight64(unsigned long w)
+static inline unsigned long __arch_hweight64(unsigned long w)
 {
 	return __kernel_ctpop(w);
 }
 
-static inline unsigned int hweight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
 {
-	return hweight64(w);
+	return __arch_hweight64(w);
 }
 
-static inline unsigned int hweight16(unsigned int w)
+static inline unsigned int __arch_hweight16(unsigned int w)
 {
-	return hweight64(w & 0xffff);
+	return __arch_hweight64(w & 0xffff);
 }
 
-static inline unsigned int hweight8(unsigned int w)
+static inline unsigned int __arch_hweight8(unsigned int w)
 {
-	return hweight64(w & 0xff);
+	return __arch_hweight64(w & 0xff);
 }
 #else
-#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/arch_hweight.h>
 #endif
 
+#include <asm-generic/bitops/const_hweight.h>
+
 #endif /* __KERNEL__ */
 
 #include <asm-generic/bitops/find.h>
@@ -436,22 +438,20 @@
 
 /*
  * Every architecture must define this function. It's the fastest
- * way of searching a 140-bit bitmap where the first 100 bits are
- * unlikely to be set. It's guaranteed that at least one of the 140
- * bits is set.
+ * way of searching a 100-bit bitmap.  It's guaranteed that at least
+ * one of the 100 bits is cleared.
  */
 static inline unsigned long
-sched_find_first_bit(unsigned long b[3])
+sched_find_first_bit(const unsigned long b[2])
 {
-	unsigned long b0 = b[0], b1 = b[1], b2 = b[2];
-	unsigned long ofs;
+	unsigned long b0, b1, ofs, tmp;
 
-	ofs = (b1 ? 64 : 128);
-	b1 = (b1 ? b1 : b2);
-	ofs = (b0 ? 0 : ofs);
-	b0 = (b0 ? b0 : b1);
+	b0 = b[0];
+	b1 = b[1];
+	ofs = (b0 ? 0 : 64);
+	tmp = (b0 ? b0 : b1);
 
-	return __ffs(b0) + ofs;
+	return __ffs(tmp) + ofs;
 }
 
 #include <asm-generic/bitops/ext2-non-atomic.h>
diff -druN linux-libre-2.6.34-gnu/arch/alpha/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/alpha/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/alpha/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/alpha/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,24 +1,7 @@
 #ifndef _ALPHA_SCATTERLIST_H
 #define _ALPHA_SCATTERLIST_H
 
-#include <asm/page.h>
-#include <asm/types.h>
-  
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-
-	unsigned int length;
-
-	dma_addr_t dma_address;
-	__u32 dma_length;
-};
-
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->dma_length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (~0UL)
 
diff -druN linux-libre-2.6.34-gnu/arch/alpha/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/alpha/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/alpha/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/alpha/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -77,7 +77,7 @@
 #define TIF_UAC_NOPRINT		10	/* see sysinfo.h */
 #define TIF_UAC_NOFIX		11
 #define TIF_UAC_SIGBUS		12
-#define TIF_MEMDIE		13
+#define TIF_MEMDIE		13	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	14	/* restore signal mask in do_signal */
 #define TIF_FREEZE		16	/* is freezing for suspend */
 
diff -druN linux-libre-2.6.34-gnu/arch/alpha/Kconfig linux-libre-2.6.35-gnu/arch/alpha/Kconfig
--- linux-libre-2.6.34-gnu/arch/alpha/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/alpha/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -51,9 +51,8 @@
 	bool
 	default y
 
-config ARCH_USES_GETTIMEOFFSET
-	bool
-	default y
+config GENERIC_CMOS_UPDATE
+        def_bool y
 
 config ZONE_DMA
 	bool
@@ -62,6 +61,9 @@
 config NEED_DMA_MAP_STATE
        def_bool y
 
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
 config GENERIC_ISA_DMA
 	bool
 	default y
diff -druN linux-libre-2.6.34-gnu/arch/alpha/kernel/Makefile linux-libre-2.6.35-gnu/arch/alpha/kernel/Makefile
--- linux-libre-2.6.34-gnu/arch/alpha/kernel/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/alpha/kernel/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -35,7 +35,7 @@
 
 obj-y	 += irq_pyxis.o irq_i8259.o irq_srm.o
 obj-y	 += err_ev6.o
-obj-y	 += es1888.o smc37c669.o smc37c93x.o ns87312.o gct.o
+obj-y	 += es1888.o smc37c669.o smc37c93x.o pc873xx.o gct.o
 obj-y    += srmcons.o
 
 else
@@ -63,11 +63,11 @@
 # Board support
 obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
 obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 				   smc37c93x.o
 obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -90,14 +90,14 @@
 obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
 obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
 obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
+obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
 obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
 				   irq_srm.o smc37c669.o
-obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o ns87312.o
+obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
 obj-$(CONFIG_ALPHA_WILDFIRE)	+= sys_wildfire.o irq_i8259.o
 
 # Error support
diff -druN linux-libre-2.6.34-gnu/arch/alpha/kernel/ns87312.c linux-libre-2.6.35-gnu/arch/alpha/kernel/ns87312.c
--- linux-libre-2.6.34-gnu/arch/alpha/kernel/ns87312.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/alpha/kernel/ns87312.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,38 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/ns87312.c
- */
-
-#include <linux/init.h>
-#include <asm/io.h>
-#include "proto.h"
-
-
-/*
- * The SRM console *disables* the IDE interface, this code ensures it's
- * enabled.
- *
- * This code bangs on a control register of the 87312 Super I/O chip
- * that implements parallel port/serial ports/IDE/FDI.  Depending on
- * the motherboard, the Super I/O chip can be configured through a
- * pair of registers that are located either at I/O ports 0x26e/0x26f
- * or 0x398/0x399.  Unfortunately, autodetecting which base address is
- * in use works only once (right after a reset).  The Super I/O chip
- * has the additional quirk that configuration register data must be
- * written twice (I believe this is a safety feature to prevent
- * accidental modification---fun, isn't it?).
- */
-
-void __init
-ns87312_enable_ide(long ide_base)
-{
-	int data;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	data = inb(ide_base+1);		/* read the current contents */
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE, really! */
-	local_irq_restore(flags);
-}
diff -druN linux-libre-2.6.34-gnu/arch/alpha/kernel/pc873xx.c linux-libre-2.6.35-gnu/arch/alpha/kernel/pc873xx.c
--- linux-libre-2.6.34-gnu/arch/alpha/kernel/pc873xx.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/alpha/kernel/pc873xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,88 @@
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include "pc873xx.h"
+
+static unsigned pc873xx_probelist[] = {0x398, 0x26e, 0};
+
+static char *pc873xx_names[] = {
+	"PC87303", "PC87306", "PC87312", "PC87332", "PC87334"
+};
+
+static unsigned int base, model;
+
+
+unsigned int __init pc873xx_get_base()
+{
+	return base;
+}
+
+char *__init pc873xx_get_model()
+{
+	return pc873xx_names[model];
+}
+
+static unsigned char __init pc873xx_read(unsigned int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static void __init pc873xx_write(unsigned int base, int reg, unsigned char data)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	outb(reg, base);
+	outb(data, base + 1);
+	outb(data, base + 1);		/* Must be written twice */
+	local_irq_restore(flags);
+}
+
+int __init pc873xx_probe(void)
+{
+	int val, index = 0;
+
+	while ((base = pc873xx_probelist[index++])) {
+
+		if (request_region(base, 2, "Super IO PC873xx") == NULL)
+			continue;
+
+		val = pc873xx_read(base, REG_SID);
+		if ((val & 0xf0) == 0x10) {
+			model = PC87332;
+			break;
+		} else if ((val & 0xf8) == 0x70) {
+			model = PC87306;
+			break;
+		} else if ((val & 0xf8) == 0x50) {
+			model = PC87334;
+			break;
+		} else if ((val & 0xf8) == 0x40) {
+			model = PC87303;
+			break;
+		}
+
+		release_region(base, 2);
+	}
+
+	return (base == 0) ? -1 : 1;
+}
+
+void __init pc873xx_enable_epp19(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
+	data = pc873xx_read(base, REG_PCR);
+	pc873xx_write(base, REG_PCR, (data & 0xFC) | 0x02);
+}
+
+void __init pc873xx_enable_ide(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
+	data = pc873xx_read(base, REG_FER);
+	pc873xx_write(base, REG_FER, data | 0x40);
+}
diff -druN linux-libre-2.6.34-gnu/arch/alpha/kernel/pc873xx.h linux-libre-2.6.35-gnu/arch/alpha/kernel/pc873xx.h
--- linux-libre-2.6.34-gnu/arch/alpha/kernel/pc873xx.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/alpha/kernel/pc873xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,35 @@
+
+#ifndef _PC873xx_H_
+#define _PC873xx_H_
+
+/*
+ * Control Register Values
+ */
+#define REG_FER	0x00
+#define REG_FAR	0x01
+#define REG_PTR	0x02
+#define REG_FCR	0x03
+#define REG_PCR	0x04
+#define REG_KRR	0x05
+#define REG_PMC	0x06
+#define REG_TUP	0x07
+#define REG_SID	0x08
+#define REG_ASC	0x09
+#define REG_IRC	0x0e
+
+/*
+ * Model numbers
+ */
+#define PC87303	0
+#define PC87306	1
+#define PC87312	2
+#define PC87332	3
+#define PC87334	4
+
+int pc873xx_probe(void);
+unsigned int pc873xx_get_base(void);
+char *pc873xx_get_model(void);
+void pc873xx_enable_epp19(void);
+void pc873xx_enable_ide(void);
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/alpha/kernel/pci-sysfs.c linux-libre-2.6.35-gnu/arch/alpha/kernel/pci-sysfs.c
--- linux-libre-2.6.34-gnu/arch/alpha/kernel/pci-sysfs.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/alpha/kernel/pci-sysfs.c	2010-08-01 18:11:14.000000000 -0400
@@ -60,7 +60,8 @@
  *
  * Use the bus mapping routines to map a PCI resource into userspace.
  */
-static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
+static int pci_mmap_resource(struct kobject *kobj,
+			     struct bin_attribute *attr,
 			     struct vm_area_struct *vma, int sparse)
 {
 	struct pci_dev *pdev = to_pci_dev(container_of(kobj,
@@ -89,14 +90,14 @@
 	return hose_mmap_page_range(pdev->sysdata, vma, mmap_type, sparse);
 }
 
-static int pci_mmap_resource_sparse(struct kobject *kobj,
+static int pci_mmap_resource_sparse(struct file *filp, struct kobject *kobj,
 				    struct bin_attribute *attr,
 				    struct vm_area_struct *vma)
 {
 	return pci_mmap_resource(kobj, attr, vma, 1);
 }
 
-static int pci_mmap_resource_dense(struct kobject *kobj,
+static int pci_mmap_resource_dense(struct file *filp, struct kobject *kobj,
 				   struct bin_attribute *attr,
 				   struct vm_area_struct *vma)
 {
diff -druN linux-libre-2.6.34-gnu/arch/alpha/kernel/sys_sio.c linux-libre-2.6.35-gnu/arch/alpha/kernel/sys_sio.c
--- linux-libre-2.6.34-gnu/arch/alpha/kernel/sys_sio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/alpha/kernel/sys_sio.c	2010-08-01 18:11:14.000000000 -0400
@@ -34,6 +34,7 @@
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"
+#include "pc873xx.h"
 
 #if defined(ALPHA_RESTORE_SRM_SETUP)
 /* Save LCA configuration data as the console had it set up.  */
@@ -208,7 +209,27 @@
 	common_init_pci();
 	sio_pci_route();
 	sio_fixup_irq_levels(sio_collect_irq_levels());
-	ns87312_enable_ide(0x26e);
+
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	} else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+
+		/* Enabling things in the Super IO chip doesn't actually
+		 * configure and enable things, the legacy drivers still
+		 * need to do the actual configuration and enabling.
+		 * This only unblocks them.
+		 */
+
+#if !defined(CONFIG_ALPHA_AVANTI)
+		/* Don't bother on the Avanti family.
+		 * None of them had on-board IDE.
+		 */
+		pc873xx_enable_ide();
+#endif
+		pc873xx_enable_epp19();
+	}
 }
 
 static inline void __init
diff -druN linux-libre-2.6.34-gnu/arch/alpha/kernel/time.c linux-libre-2.6.35-gnu/arch/alpha/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/alpha/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/alpha/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -51,6 +51,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/time.h>
 #include <linux/timex.h>
+#include <linux/clocksource.h>
 
 #include "proto.h"
 #include "irq_impl.h"
@@ -75,8 +76,6 @@
 	__u32 last_time;
 	/* ticks/cycle * 2^48 */
 	unsigned long scaled_ticks_per_cycle;
-	/* last time the CMOS clock got updated */
-	time_t last_rtc_update;
 	/* partial unused tick */
 	unsigned long partial_tick;
 } state;
@@ -91,6 +90,52 @@
     return result;
 }
 
+int update_persistent_clock(struct timespec now)
+{
+	return set_rtc_mmss(now.tv_sec);
+}
+
+void read_persistent_clock(struct timespec *ts)
+{
+	unsigned int year, mon, day, hour, min, sec, epoch;
+
+	sec = CMOS_READ(RTC_SECONDS);
+	min = CMOS_READ(RTC_MINUTES);
+	hour = CMOS_READ(RTC_HOURS);
+	day = CMOS_READ(RTC_DAY_OF_MONTH);
+	mon = CMOS_READ(RTC_MONTH);
+	year = CMOS_READ(RTC_YEAR);
+
+	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
+	}
+
+	/* PC-like is standard; used for year >= 70 */
+	epoch = 1900;
+	if (year < 20)
+		epoch = 2000;
+	else if (year >= 20 && year < 48)
+		/* NT epoch */
+		epoch = 1980;
+	else if (year >= 48 && year < 70)
+		/* Digital UNIX epoch */
+		epoch = 1952;
+
+	printk(KERN_INFO "Using epoch = %d\n", epoch);
+
+	if ((year += epoch) < 1970)
+		year += 100;
+
+	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+}
+
+
+
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
@@ -123,19 +168,6 @@
 	if (nticks)
 		do_timer(nticks);
 
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced()
-	    && xtime.tv_sec > state.last_rtc_update + 660
-	    && xtime.tv_nsec >= 500000 - ((unsigned) TICK_SIZE) / 2
-	    && xtime.tv_nsec <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-		int tmp = set_rtc_mmss(xtime.tv_sec);
-		state.last_rtc_update = xtime.tv_sec - (tmp ? 600 : 0);
-	}
-
 	write_sequnlock(&xtime_lock);
 
 #ifndef CONFIG_SMP
@@ -301,10 +333,38 @@
 	return rpcc();
 }
 
+#ifndef CONFIG_SMP
+/* Until and unless we figure out how to get cpu cycle counters
+   in sync and keep them there, we can't use the rpcc.  */
+static cycle_t read_rpcc(struct clocksource *cs)
+{
+	cycle_t ret = (cycle_t)rpcc();
+	return ret;
+}
+
+static struct clocksource clocksource_rpcc = {
+	.name                   = "rpcc",
+	.rating                 = 300,
+	.read                   = read_rpcc,
+	.mask                   = CLOCKSOURCE_MASK(32),
+	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS
+};
+
+static inline void register_rpcc_clocksource(long cycle_freq)
+{
+	clocksource_calc_mult_shift(&clocksource_rpcc, cycle_freq, 4);
+	clocksource_register(&clocksource_rpcc);
+}
+#else /* !CONFIG_SMP */
+static inline void register_rpcc_clocksource(long cycle_freq)
+{
+}
+#endif /* !CONFIG_SMP */
+
 void __init
 time_init(void)
 {
-	unsigned int year, mon, day, hour, min, sec, cc1, cc2, epoch;
+	unsigned int cc1, cc2;
 	unsigned long cycle_freq, tolerance;
 	long diff;
 
@@ -348,53 +408,17 @@
 	   bogomips yet, but this is close on a 500Mhz box.  */
 	__delay(1000000);
 
-	sec = CMOS_READ(RTC_SECONDS);
-	min = CMOS_READ(RTC_MINUTES);
-	hour = CMOS_READ(RTC_HOURS);
-	day = CMOS_READ(RTC_DAY_OF_MONTH);
-	mon = CMOS_READ(RTC_MONTH);
-	year = CMOS_READ(RTC_YEAR);
-
-	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		sec = bcd2bin(sec);
-		min = bcd2bin(min);
-		hour = bcd2bin(hour);
-		day = bcd2bin(day);
-		mon = bcd2bin(mon);
-		year = bcd2bin(year);
-	}
-
-	/* PC-like is standard; used for year >= 70 */
-	epoch = 1900;
-	if (year < 20)
-		epoch = 2000;
-	else if (year >= 20 && year < 48)
-		/* NT epoch */
-		epoch = 1980;
-	else if (year >= 48 && year < 70)
-		/* Digital UNIX epoch */
-		epoch = 1952;
-
-	printk(KERN_INFO "Using epoch = %d\n", epoch);
-
-	if ((year += epoch) < 1970)
-		year += 100;
-
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = 0;
-
-        wall_to_monotonic.tv_sec -= xtime.tv_sec;
-        wall_to_monotonic.tv_nsec = 0;
 
 	if (HZ > (1<<16)) {
 		extern void __you_loose (void);
 		__you_loose();
 	}
 
+	register_rpcc_clocksource(cycle_freq);
+
 	state.last_time = cc1;
 	state.scaled_ticks_per_cycle
 		= ((unsigned long) HZ << FIX_SHIFT) / cycle_freq;
-	state.last_rtc_update = 0;
 	state.partial_tick = 0L;
 
 	/* Startup the timer source. */
@@ -402,44 +426,6 @@
 }
 
 /*
- * Use the cycle counter to estimate an displacement from the last time
- * tick.  Unfortunately the Alpha designers made only the low 32-bits of
- * the cycle counter active, so we overflow on 8.2 seconds on a 500MHz
- * part.  So we can't do the "find absolute time in terms of cycles" thing
- * that the other ports do.
- */
-u32 arch_gettimeoffset(void)
-{
-#ifdef CONFIG_SMP
-	/* Until and unless we figure out how to get cpu cycle counters
-	   in sync and keep them there, we can't use the rpcc tricks.  */
-	return 0;
-#else
-	unsigned long delta_cycles, delta_usec, partial_tick;
-
-	delta_cycles = rpcc() - state.last_time;
-	partial_tick = state.partial_tick;
-	/*
-	 * usec = cycles * ticks_per_cycle * 2**48 * 1e6 / (2**48 * ticks)
-	 *	= cycles * (s_t_p_c) * 1e6 / (2**48 * ticks)
-	 *	= cycles * (s_t_p_c) * 15625 / (2**42 * ticks)
-	 *
-	 * which, given a 600MHz cycle and a 1024Hz tick, has a
-	 * dynamic range of about 1.7e17, which is less than the
-	 * 1.8e19 in an unsigned long, so we are safe from overflow.
-	 *
-	 * Round, but with .5 up always, since .5 to even is harder
-	 * with no clear gain.
-	 */
-
-	delta_usec = (delta_cycles * state.scaled_ticks_per_cycle 
-		      + partial_tick) * 15625;
-	delta_usec = ((delta_usec / ((1UL << (FIX_SHIFT-6-1)) * HZ)) + 1) / 2;
-	return delta_usec * 1000;
-#endif
-}
-
-/*
  * In order to set the CMOS clock precisely, set_rtc_mmss has to be
  * called 500 ms after the second nowtime has started, because when
  * nowtime is written into the registers of the CMOS clock, it will
diff -druN linux-libre-2.6.34-gnu/arch/alpha/mm/fault.c linux-libre-2.6.35-gnu/arch/alpha/mm/fault.c
--- linux-libre-2.6.34-gnu/arch/alpha/mm/fault.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/alpha/mm/fault.c	2010-08-01 18:11:14.000000000 -0400
@@ -142,7 +142,6 @@
 			goto bad_area;
 	}
 
- survive:
 	/* If for any reason at all we couldn't handle the fault,
 	   make sure we exit gracefully rather than endlessly redo
 	   the fault.  */
@@ -188,16 +187,10 @@
 	/* We ran out of memory, or some other thing happened to us that
 	   made us unable to handle the page fault gracefully.  */
  out_of_memory:
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk(KERN_ALERT "VM: killing process %s(%d)\n",
-	       current->comm, task_pid_nr(current));
 	if (!user_mode(regs))
 		goto no_context;
-	do_group_exit(SIGKILL);
+	pagefault_out_of_memory();
+	return;
 
  do_sigbus:
 	/* Send a sigbus, regardless of whether we were in kernel
diff -druN linux-libre-2.6.34-gnu/arch/arm/boot/bootp/bootp.lds linux-libre-2.6.35-gnu/arch/arm/boot/bootp/bootp.lds
--- linux-libre-2.6.34-gnu/arch/arm/boot/bootp/bootp.lds	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/boot/bootp/bootp.lds	2010-08-01 18:11:14.000000000 -0400
@@ -19,7 +19,7 @@
    initrd_size = initrd_end - initrd_start;
    _etext = .;
   }
-  
+
   .stab 0 : { *(.stab) }
   .stabstr 0 : { *(.stabstr) }
   .stab.excl 0 : { *(.stab.excl) }
diff -druN linux-libre-2.6.34-gnu/arch/arm/boot/compressed/decompress.c linux-libre-2.6.35-gnu/arch/arm/boot/compressed/decompress.c
--- linux-libre-2.6.34-gnu/arch/arm/boot/compressed/decompress.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/boot/compressed/decompress.c	2010-08-01 18:11:14.000000000 -0400
@@ -40,6 +40,10 @@
 #include "../../../../lib/decompress_unlzo.c"
 #endif
 
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
 void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
 {
 	decompress(input, len, NULL, NULL, output, NULL, error);
diff -druN linux-libre-2.6.34-gnu/arch/arm/boot/compressed/Makefile linux-libre-2.6.35-gnu/arch/arm/boot/compressed/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/boot/compressed/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/boot/compressed/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -65,11 +65,15 @@
 
 suffix_$(CONFIG_KERNEL_GZIP) = gzip
 suffix_$(CONFIG_KERNEL_LZO)  = lzo
+suffix_$(CONFIG_KERNEL_LZMA) = lzma
 
 targets       := vmlinux vmlinux.lds \
 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
 		 font.o font.c head.o misc.o $(OBJS)
 
+# Make sure files are removed during clean
+extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
+
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
diff -druN linux-libre-2.6.34-gnu/arch/arm/boot/compressed/piggy.lzma.S linux-libre-2.6.35-gnu/arch/arm/boot/compressed/piggy.lzma.S
--- linux-libre-2.6.34-gnu/arch/arm/boot/compressed/piggy.lzma.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/boot/compressed/piggy.lzma.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,6 @@
+	.section .piggydata,#alloc
+	.globl	input_data
+input_data:
+	.incbin	"arch/arm/boot/compressed/piggy.lzma"
+	.globl	input_data_end
+input_data_end:
diff -druN linux-libre-2.6.34-gnu/arch/arm/common/clkdev.c linux-libre-2.6.35-gnu/arch/arm/common/clkdev.c
--- linux-libre-2.6.34-gnu/arch/arm/common/clkdev.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/common/clkdev.c	2010-08-01 18:11:14.000000000 -0400
@@ -53,12 +53,13 @@
 				continue;
 			match += 1;
 		}
-		if (match == 0)
-			continue;
 
 		if (match > best) {
 			clk = p->clk;
-			best = match;
+			if (match != 3)
+				best = match;
+			else
+				break;
 		}
 	}
 	return clk;
diff -druN linux-libre-2.6.34-gnu/arch/arm/common/icst307.c linux-libre-2.6.35-gnu/arch/arm/common/icst307.c
--- linux-libre-2.6.34-gnu/arch/arm/common/icst307.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/common/icst307.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,161 +0,0 @@
-/*
- *  linux/arch/arm/common/icst307.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST307
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- *
- *  This is an almost identical implementation to the ICST525 clock generator.
- *  The s2div and idx2s files are different
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/icst307.h>
-
-/*
- * Divisors for each OD setting.
- */
-static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
-
-unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco)
-{
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]);
-}
-
-EXPORT_SYMBOL(icst307_khz);
-
-/*
- * Ascending divisor S values.
- */
-static unsigned char idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
-
-struct icst307_vco
-icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq)
-{
-	struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = freq * s2div[idx2s[i]];
-
-		/*
-		 * f must be between 6MHz and 200MHz (3.3 or 5V)
-		 */
-		if (f > 6000 && f <= p->vco_max)
-			break;
-	} while (i < ARRAY_SIZE(idx2s));
-
-	if (i >= ARRAY_SIZE(idx2s))
-		return vco;
-
-	vco.s = idx2s[i];
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long fref_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		fref_div = (2 * p->ref) / rd;
-
-		vd = (f + fref_div / 2) / fref_div;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = fref_div * vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst307_khz_to_vco);
-
-struct icst307_vco
-icst307_ps_to_vco(const struct icst307_params *p, unsigned long period)
-{
-	struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f, ps;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	ps = 1000000000UL / p->vco_max;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = period / s2div[idx2s[i]];
-
-		/*
-		 * f must be between 6MHz and 200MHz (3.3 or 5V)
-		 */
-		if (f >= ps && f < 1000000000UL / 6000 + 1)
-			break;
-	} while (i < ARRAY_SIZE(idx2s));
-
-	if (i >= ARRAY_SIZE(idx2s))
-		return vco;
-
-	vco.s = idx2s[i];
-
-	ps = 500000000UL / p->ref;
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long f_in_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		f_in_div = ps * rd;
-
-		vd = (f_in_div + f / 2) / f;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = (f_in_div + vd / 2) / vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst307_ps_to_vco);
diff -druN linux-libre-2.6.34-gnu/arch/arm/common/icst525.c linux-libre-2.6.35-gnu/arch/arm/common/icst525.c
--- linux-libre-2.6.34-gnu/arch/arm/common/icst525.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/common/icst525.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,160 +0,0 @@
-/*
- *  linux/arch/arm/common/icst525.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST525
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/icst525.h>
-
-/*
- * Divisors for each OD setting.
- */
-static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
-
-unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco)
-{
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]);
-}
-
-EXPORT_SYMBOL(icst525_khz);
-
-/*
- * Ascending divisor S values.
- */
-static unsigned char idx2s[] = { 1, 3, 4, 7, 5, 2, 6, 0 };
-
-struct icst525_vco
-icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq)
-{
-	struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = freq * s2div[idx2s[i]];
-
-		/*
-		 * f must be between 10MHz and
-		 *  320MHz (5V) or 200MHz (3V)
-		 */
-		if (f > 10000 && f <= p->vco_max)
-			break;
-	} while (i < ARRAY_SIZE(idx2s));
-
-	if (i >= ARRAY_SIZE(idx2s))
-		return vco;
-
-	vco.s = idx2s[i];
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long fref_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		fref_div = (2 * p->ref) / rd;
-
-		vd = (f + fref_div / 2) / fref_div;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = fref_div * vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst525_khz_to_vco);
-
-struct icst525_vco
-icst525_ps_to_vco(const struct icst525_params *p, unsigned long period)
-{
-	struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f, ps;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	ps = 1000000000UL / p->vco_max;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = period / s2div[idx2s[i]];
-
-		/*
-		 * f must be between 10MHz and
-		 *  320MHz (5V) or 200MHz (3V)
-		 */
-		if (f >= ps && f < 100000)
-			break;
-	} while (i < ARRAY_SIZE(idx2s));
-
-	if (i >= ARRAY_SIZE(idx2s))
-		return vco;
-
-	vco.s = idx2s[i];
-
-	ps = 500000000UL / p->ref;
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long f_in_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		f_in_div = ps * rd;
-
-		vd = (f_in_div + f / 2) / f;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = (f_in_div + vd / 2) / vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst525_ps_to_vco);
diff -druN linux-libre-2.6.34-gnu/arch/arm/common/icst.c linux-libre-2.6.35-gnu/arch/arm/common/icst.c
--- linux-libre-2.6.34-gnu/arch/arm/common/icst.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/common/icst.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,100 @@
+/*
+ *  linux/arch/arm/common/icst307.c
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICST307
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ *
+ *  This is an almost identical implementation to the ICST525 clock generator.
+ *  The s2div and idx2s files are different
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware/icst.h>
+
+/*
+ * Divisors for each OD setting.
+ */
+const unsigned char icst307_s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
+const unsigned char icst525_s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
+EXPORT_SYMBOL(icst307_s2div);
+EXPORT_SYMBOL(icst525_s2div);
+
+unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
+{
+	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+}
+
+EXPORT_SYMBOL(icst_hz);
+
+/*
+ * Ascending divisor S values.
+ */
+const unsigned char icst307_idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
+const unsigned char icst525_idx2s[8] = { 1, 3, 4, 7, 5, 2, 6, 0 };
+EXPORT_SYMBOL(icst307_idx2s);
+EXPORT_SYMBOL(icst525_idx2s);
+
+struct icst_vco
+icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
+{
+	struct icst_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
+	unsigned long f;
+	unsigned int i = 0, rd, best = (unsigned int)-1;
+
+	/*
+	 * First, find the PLL output divisor such
+	 * that the PLL output is within spec.
+	 */
+	do {
+		f = freq * p->s2div[p->idx2s[i]];
+
+		if (f > p->vco_min && f <= p->vco_max)
+			break;
+	} while (i < 8);
+
+	if (i >= 8)
+		return vco;
+
+	vco.s = p->idx2s[i];
+
+	/*
+	 * Now find the closest divisor combination
+	 * which gives a PLL output of 'f'.
+	 */
+	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
+		unsigned long fref_div, f_pll;
+		unsigned int vd;
+		int f_diff;
+
+		fref_div = (2 * p->ref) / rd;
+
+		vd = (f + fref_div / 2) / fref_div;
+		if (vd < p->vd_min || vd > p->vd_max)
+			continue;
+
+		f_pll = fref_div * vd;
+		f_diff = f_pll - f;
+		if (f_diff < 0)
+			f_diff = -f_diff;
+
+		if ((unsigned)f_diff < best) {
+			vco.v = vd - 8;
+			vco.r = rd - 2;
+			if (f_diff == 0)
+				break;
+			best = f_diff;
+		}
+	}
+
+	return vco;
+}
+
+EXPORT_SYMBOL(icst_hz_to_vco);
diff -druN linux-libre-2.6.34-gnu/arch/arm/common/Kconfig linux-libre-2.6.35-gnu/arch/arm/common/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/common/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/common/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -12,10 +12,10 @@
 	  The maximum number of VICs available in the system, for
 	  power management.
 
-config ICST525
+config ICST
 	bool
 
-config ICST307
+config PL330
 	bool
 
 config SA1111
@@ -40,3 +40,4 @@
 
 config COMMON_CLKDEV
 	bool
+	select HAVE_CLK
diff -druN linux-libre-2.6.34-gnu/arch/arm/common/Makefile linux-libre-2.6.35-gnu/arch/arm/common/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/common/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/common/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -4,8 +4,8 @@
 
 obj-$(CONFIG_ARM_GIC)		+= gic.o
 obj-$(CONFIG_ARM_VIC)		+= vic.o
-obj-$(CONFIG_ICST525)		+= icst525.o
-obj-$(CONFIG_ICST307)		+= icst307.o
+obj-$(CONFIG_ICST)		+= icst.o
+obj-$(CONFIG_PL330)		+= pl330.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/common/pl330.c linux-libre-2.6.35-gnu/arch/arm/common/pl330.c
--- linux-libre-2.6.34-gnu/arch/arm/common/pl330.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/common/pl330.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,1966 @@
+/* linux/arch/arm/common/pl330.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/hardware/pl330.h>
+
+/* Register and Bit field Definitions */
+#define DS		0x0
+#define DS_ST_STOP	0x0
+#define DS_ST_EXEC	0x1
+#define DS_ST_CMISS	0x2
+#define DS_ST_UPDTPC	0x3
+#define DS_ST_WFE	0x4
+#define DS_ST_ATBRR	0x5
+#define DS_ST_QBUSY	0x6
+#define DS_ST_WFP	0x7
+#define DS_ST_KILL	0x8
+#define DS_ST_CMPLT	0x9
+#define DS_ST_FLTCMP	0xe
+#define DS_ST_FAULT	0xf
+
+#define DPC		0x4
+#define INTEN		0x20
+#define ES		0x24
+#define INTSTATUS	0x28
+#define INTCLR		0x2c
+#define FSM		0x30
+#define FSC		0x34
+#define FTM		0x38
+
+#define _FTC		0x40
+#define FTC(n)		(_FTC + (n)*0x4)
+
+#define _CS		0x100
+#define CS(n)		(_CS + (n)*0x8)
+#define CS_CNS		(1 << 21)
+
+#define _CPC		0x104
+#define CPC(n)		(_CPC + (n)*0x8)
+
+#define _SA		0x400
+#define SA(n)		(_SA + (n)*0x20)
+
+#define _DA		0x404
+#define DA(n)		(_DA + (n)*0x20)
+
+#define _CC		0x408
+#define CC(n)		(_CC + (n)*0x20)
+
+#define CC_SRCINC	(1 << 0)
+#define CC_DSTINC	(1 << 14)
+#define CC_SRCPRI	(1 << 8)
+#define CC_DSTPRI	(1 << 22)
+#define CC_SRCNS	(1 << 9)
+#define CC_DSTNS	(1 << 23)
+#define CC_SRCIA	(1 << 10)
+#define CC_DSTIA	(1 << 24)
+#define CC_SRCBRSTLEN_SHFT	4
+#define CC_DSTBRSTLEN_SHFT	18
+#define CC_SRCBRSTSIZE_SHFT	1
+#define CC_DSTBRSTSIZE_SHFT	15
+#define CC_SRCCCTRL_SHFT	11
+#define CC_SRCCCTRL_MASK	0x7
+#define CC_DSTCCTRL_SHFT	25
+#define CC_DRCCCTRL_MASK	0x7
+#define CC_SWAP_SHFT	28
+
+#define _LC0		0x40c
+#define LC0(n)		(_LC0 + (n)*0x20)
+
+#define _LC1		0x410
+#define LC1(n)		(_LC1 + (n)*0x20)
+
+#define DBGSTATUS	0xd00
+#define DBG_BUSY	(1 << 0)
+
+#define DBGCMD		0xd04
+#define DBGINST0	0xd08
+#define DBGINST1	0xd0c
+
+#define CR0		0xe00
+#define CR1		0xe04
+#define CR2		0xe08
+#define CR3		0xe0c
+#define CR4		0xe10
+#define CRD		0xe14
+
+#define PERIPH_ID	0xfe0
+#define PCELL_ID	0xff0
+
+#define CR0_PERIPH_REQ_SET	(1 << 0)
+#define CR0_BOOT_EN_SET		(1 << 1)
+#define CR0_BOOT_MAN_NS		(1 << 2)
+#define CR0_NUM_CHANS_SHIFT	4
+#define CR0_NUM_CHANS_MASK	0x7
+#define CR0_NUM_PERIPH_SHIFT	12
+#define CR0_NUM_PERIPH_MASK	0x1f
+#define CR0_NUM_EVENTS_SHIFT	17
+#define CR0_NUM_EVENTS_MASK	0x1f
+
+#define CR1_ICACHE_LEN_SHIFT	0
+#define CR1_ICACHE_LEN_MASK	0x7
+#define CR1_NUM_ICACHELINES_SHIFT	4
+#define CR1_NUM_ICACHELINES_MASK	0xf
+
+#define CRD_DATA_WIDTH_SHIFT	0
+#define CRD_DATA_WIDTH_MASK	0x7
+#define CRD_WR_CAP_SHIFT	4
+#define CRD_WR_CAP_MASK		0x7
+#define CRD_WR_Q_DEP_SHIFT	8
+#define CRD_WR_Q_DEP_MASK	0xf
+#define CRD_RD_CAP_SHIFT	12
+#define CRD_RD_CAP_MASK		0x7
+#define CRD_RD_Q_DEP_SHIFT	16
+#define CRD_RD_Q_DEP_MASK	0xf
+#define CRD_DATA_BUFF_SHIFT	20
+#define CRD_DATA_BUFF_MASK	0x3ff
+
+#define	PART		0x330
+#define DESIGNER	0x41
+#define REVISION	0x0
+#define INTEG_CFG	0x0
+#define PERIPH_ID_VAL	((PART << 0) | (DESIGNER << 12) \
+			  | (REVISION << 20) | (INTEG_CFG << 24))
+
+#define PCELL_ID_VAL	0xb105f00d
+
+#define PL330_STATE_STOPPED		(1 << 0)
+#define PL330_STATE_EXECUTING		(1 << 1)
+#define PL330_STATE_WFE			(1 << 2)
+#define PL330_STATE_FAULTING		(1 << 3)
+#define PL330_STATE_COMPLETING		(1 << 4)
+#define PL330_STATE_WFP			(1 << 5)
+#define PL330_STATE_KILLING		(1 << 6)
+#define PL330_STATE_FAULT_COMPLETING	(1 << 7)
+#define PL330_STATE_CACHEMISS		(1 << 8)
+#define PL330_STATE_UPDTPC		(1 << 9)
+#define PL330_STATE_ATBARRIER		(1 << 10)
+#define PL330_STATE_QUEUEBUSY		(1 << 11)
+#define PL330_STATE_INVALID		(1 << 15)
+
+#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
+				| PL330_STATE_WFE | PL330_STATE_FAULTING)
+
+#define CMD_DMAADDH	0x54
+#define CMD_DMAEND	0x00
+#define CMD_DMAFLUSHP	0x35
+#define CMD_DMAGO	0xa0
+#define CMD_DMALD	0x04
+#define CMD_DMALDP	0x25
+#define CMD_DMALP	0x20
+#define CMD_DMALPEND	0x28
+#define CMD_DMAKILL	0x01
+#define CMD_DMAMOV	0xbc
+#define CMD_DMANOP	0x18
+#define CMD_DMARMB	0x12
+#define CMD_DMASEV	0x34
+#define CMD_DMAST	0x08
+#define CMD_DMASTP	0x29
+#define CMD_DMASTZ	0x0c
+#define CMD_DMAWFE	0x36
+#define CMD_DMAWFP	0x30
+#define CMD_DMAWMB	0x13
+
+#define SZ_DMAADDH	3
+#define SZ_DMAEND	1
+#define SZ_DMAFLUSHP	2
+#define SZ_DMALD	1
+#define SZ_DMALDP	2
+#define SZ_DMALP	2
+#define SZ_DMALPEND	2
+#define SZ_DMAKILL	1
+#define SZ_DMAMOV	6
+#define SZ_DMANOP	1
+#define SZ_DMARMB	1
+#define SZ_DMASEV	2
+#define SZ_DMAST	1
+#define SZ_DMASTP	2
+#define SZ_DMASTZ	1
+#define SZ_DMAWFE	2
+#define SZ_DMAWFP	2
+#define SZ_DMAWMB	1
+#define SZ_DMAGO	6
+
+#define BRST_LEN(ccr)	((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
+#define BRST_SIZE(ccr)	(1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
+
+#define BYTE_TO_BURST(b, ccr)  ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
+#define BURST_TO_BYTE(c, ccr)  ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
+
+/*
+ * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
+ * at 1byte/burst for P<->M and M<->M respectively.
+ * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
+ * should be enough for P<->M and M<->M respectively.
+ */
+#define MCODE_BUFF_PER_REQ	256
+
+/*
+ * Mark a _pl330_req as free.
+ * We do it by writing DMAEND as the first instruction
+ * because no valid request is going to have DMAEND as
+ * its first instruction to execute.
+ */
+#define MARK_FREE(req)	do { \
+				_emit_END(0, (req)->mc_cpu); \
+				(req)->mc_len = 0; \
+			} while (0)
+
+/* If the _pl330_req is available to the client */
+#define IS_FREE(req)	(*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
+
+/* Use this _only_ to wait on transient states */
+#define UNTIL(t, s)	while (!(_state(t) & (s))) cpu_relax();
+
+#ifdef PL330_DEBUG_MCGEN
+static unsigned cmd_line;
+#define PL330_DBGCMD_DUMP(off, x...)	do { \
+						printk("%x:", cmd_line); \
+						printk(x); \
+						cmd_line += off; \
+					} while (0)
+#define PL330_DBGMC_START(addr)		(cmd_line = addr)
+#else
+#define PL330_DBGCMD_DUMP(off, x...)	do {} while (0)
+#define PL330_DBGMC_START(addr)		do {} while (0)
+#endif
+
+struct _xfer_spec {
+	u32 ccr;
+	struct pl330_req *r;
+	struct pl330_xfer *x;
+};
+
+enum dmamov_dst {
+	SAR = 0,
+	CCR,
+	DAR,
+};
+
+enum pl330_dst {
+	SRC = 0,
+	DST,
+};
+
+enum pl330_cond {
+	SINGLE,
+	BURST,
+	ALWAYS,
+};
+
+struct _pl330_req {
+	u32 mc_bus;
+	void *mc_cpu;
+	/* Number of bytes taken to setup MC for the req */
+	u32 mc_len;
+	struct pl330_req *r;
+	/* Hook to attach to DMAC's list of reqs with due callback */
+	struct list_head rqd;
+};
+
+/* ToBeDone for tasklet */
+struct _pl330_tbd {
+	bool reset_dmac;
+	bool reset_mngr;
+	u8 reset_chan;
+};
+
+/* A DMAC Thread */
+struct pl330_thread {
+	u8 id;
+	int ev;
+	/* If the channel is not yet acquired by any client */
+	bool free;
+	/* Parent DMAC */
+	struct pl330_dmac *dmac;
+	/* Only two at a time */
+	struct _pl330_req req[2];
+	/* Index of the last submitted request */
+	unsigned lstenq;
+};
+
+enum pl330_dmac_state {
+	UNINIT,
+	INIT,
+	DYING,
+};
+
+/* A DMAC */
+struct pl330_dmac {
+	spinlock_t		lock;
+	/* Holds list of reqs with due callbacks */
+	struct list_head	req_done;
+	/* Pointer to platform specific stuff */
+	struct pl330_info	*pinfo;
+	/* Maximum possible events/irqs */
+	int			events[32];
+	/* BUS address of MicroCode buffer */
+	u32			mcode_bus;
+	/* CPU address of MicroCode buffer */
+	void			*mcode_cpu;
+	/* List of all Channel threads */
+	struct pl330_thread	*channels;
+	/* Pointer to the MANAGER thread */
+	struct pl330_thread	*manager;
+	/* To handle bad news in interrupt */
+	struct tasklet_struct	tasks;
+	struct _pl330_tbd	dmac_tbd;
+	/* State of DMAC operation */
+	enum pl330_dmac_state	state;
+};
+
+static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
+{
+	if (r && r->xfer_cb)
+		r->xfer_cb(r->token, err);
+}
+
+static inline bool _queue_empty(struct pl330_thread *thrd)
+{
+	return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
+		? true : false;
+}
+
+static inline bool _queue_full(struct pl330_thread *thrd)
+{
+	return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
+		? false : true;
+}
+
+static inline bool is_manager(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+
+	/* MANAGER is indexed at the end */
+	if (thrd->id == pl330->pinfo->pcfg.num_chan)
+		return true;
+	else
+		return false;
+}
+
+/* If manager of the thread is in Non-Secure mode */
+static inline bool _manager_ns(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+
+	return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
+}
+
+static inline u32 get_id(struct pl330_info *pi, u32 off)
+{
+	void __iomem *regs = pi->base;
+	u32 id = 0;
+
+	id |= (readb(regs + off + 0x0) << 0);
+	id |= (readb(regs + off + 0x4) << 8);
+	id |= (readb(regs + off + 0x8) << 16);
+	id |= (readb(regs + off + 0xc) << 24);
+
+	return id;
+}
+
+static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
+		enum pl330_dst da, u16 val)
+{
+	if (dry_run)
+		return SZ_DMAADDH;
+
+	buf[0] = CMD_DMAADDH;
+	buf[0] |= (da << 1);
+	*((u16 *)&buf[1]) = val;
+
+	PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
+		da == 1 ? "DA" : "SA", val);
+
+	return SZ_DMAADDH;
+}
+
+static inline u32 _emit_END(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAEND;
+
+	buf[0] = CMD_DMAEND;
+
+	PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
+
+	return SZ_DMAEND;
+}
+
+static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
+{
+	if (dry_run)
+		return SZ_DMAFLUSHP;
+
+	buf[0] = CMD_DMAFLUSHP;
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
+
+	return SZ_DMAFLUSHP;
+}
+
+static inline u32 _emit_LD(unsigned dry_run, u8 buf[],	enum pl330_cond cond)
+{
+	if (dry_run)
+		return SZ_DMALD;
+
+	buf[0] = CMD_DMALD;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+	return SZ_DMALD;
+}
+
+static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMALDP;
+
+	buf[0] = CMD_DMALDP;
+
+	if (cond == BURST)
+		buf[0] |= (1 << 1);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
+		cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+	return SZ_DMALDP;
+}
+
+static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
+		unsigned loop, u8 cnt)
+{
+	if (dry_run)
+		return SZ_DMALP;
+
+	buf[0] = CMD_DMALP;
+
+	if (loop)
+		buf[0] |= (1 << 1);
+
+	cnt--; /* DMAC increments by 1 internally */
+	buf[1] = cnt;
+
+	PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
+
+	return SZ_DMALP;
+}
+
+struct _arg_LPEND {
+	enum pl330_cond cond;
+	bool forever;
+	unsigned loop;
+	u8 bjump;
+};
+
+static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
+		const struct _arg_LPEND *arg)
+{
+	enum pl330_cond cond = arg->cond;
+	bool forever = arg->forever;
+	unsigned loop = arg->loop;
+	u8 bjump = arg->bjump;
+
+	if (dry_run)
+		return SZ_DMALPEND;
+
+	buf[0] = CMD_DMALPEND;
+
+	if (loop)
+		buf[0] |= (1 << 2);
+
+	if (!forever)
+		buf[0] |= (1 << 4);
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	buf[1] = bjump;
+
+	PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
+			forever ? "FE" : "END",
+			cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
+			loop ? '1' : '0',
+			bjump);
+
+	return SZ_DMALPEND;
+}
+
+static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAKILL;
+
+	buf[0] = CMD_DMAKILL;
+
+	return SZ_DMAKILL;
+}
+
+static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
+		enum dmamov_dst dst, u32 val)
+{
+	if (dry_run)
+		return SZ_DMAMOV;
+
+	buf[0] = CMD_DMAMOV;
+	buf[1] = dst;
+	*((u32 *)&buf[2]) = val;
+
+	PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
+		dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
+
+	return SZ_DMAMOV;
+}
+
+static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMANOP;
+
+	buf[0] = CMD_DMANOP;
+
+	PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
+
+	return SZ_DMANOP;
+}
+
+static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMARMB;
+
+	buf[0] = CMD_DMARMB;
+
+	PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
+
+	return SZ_DMARMB;
+}
+
+static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
+{
+	if (dry_run)
+		return SZ_DMASEV;
+
+	buf[0] = CMD_DMASEV;
+
+	ev &= 0x1f;
+	ev <<= 3;
+	buf[1] = ev;
+
+	PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
+
+	return SZ_DMASEV;
+}
+
+static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
+{
+	if (dry_run)
+		return SZ_DMAST;
+
+	buf[0] = CMD_DMAST;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+	return SZ_DMAST;
+}
+
+static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMASTP;
+
+	buf[0] = CMD_DMASTP;
+
+	if (cond == BURST)
+		buf[0] |= (1 << 1);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
+		cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+	return SZ_DMASTP;
+}
+
+static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMASTZ;
+
+	buf[0] = CMD_DMASTZ;
+
+	PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
+
+	return SZ_DMASTZ;
+}
+
+static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
+		unsigned invalidate)
+{
+	if (dry_run)
+		return SZ_DMAWFE;
+
+	buf[0] = CMD_DMAWFE;
+
+	ev &= 0x1f;
+	ev <<= 3;
+	buf[1] = ev;
+
+	if (invalidate)
+		buf[1] |= (1 << 1);
+
+	PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
+		ev >> 3, invalidate ? ", I" : "");
+
+	return SZ_DMAWFE;
+}
+
+static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMAWFP;
+
+	buf[0] = CMD_DMAWFP;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (0 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (0 << 0);
+	else
+		buf[0] |= (0 << 1) | (1 << 0);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
+
+	return SZ_DMAWFP;
+}
+
+static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAWMB;
+
+	buf[0] = CMD_DMAWMB;
+
+	PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
+
+	return SZ_DMAWMB;
+}
+
+struct _arg_GO {
+	u8 chan;
+	u32 addr;
+	unsigned ns;
+};
+
+static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
+		const struct _arg_GO *arg)
+{
+	u8 chan = arg->chan;
+	u32 addr = arg->addr;
+	unsigned ns = arg->ns;
+
+	if (dry_run)
+		return SZ_DMAGO;
+
+	buf[0] = CMD_DMAGO;
+	buf[0] |= (ns << 1);
+
+	buf[1] = chan & 0x7;
+
+	*((u32 *)&buf[2]) = addr;
+
+	return SZ_DMAGO;
+}
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+/* Returns Time-Out */
+static bool _until_dmac_idle(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	unsigned long loops = msecs_to_loops(5);
+
+	do {
+		/* Until Manager is Idle */
+		if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
+			break;
+
+		cpu_relax();
+	} while (--loops);
+
+	if (!loops)
+		return true;
+
+	return false;
+}
+
+static inline void _execute_DBGINSN(struct pl330_thread *thrd,
+		u8 insn[], bool as_manager)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u32 val;
+
+	val = (insn[0] << 16) | (insn[1] << 24);
+	if (!as_manager) {
+		val |= (1 << 0);
+		val |= (thrd->id << 8); /* Channel Number */
+	}
+	writel(val, regs + DBGINST0);
+
+	val = *((u32 *)&insn[2]);
+	writel(val, regs + DBGINST1);
+
+	/* If timed out due to halted state-machine */
+	if (_until_dmac_idle(thrd)) {
+		dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
+		return;
+	}
+
+	/* Get going */
+	writel(0, regs + DBGCMD);
+}
+
+static inline u32 _state(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u32 val;
+
+	if (is_manager(thrd))
+		val = readl(regs + DS) & 0xf;
+	else
+		val = readl(regs + CS(thrd->id)) & 0xf;
+
+	switch (val) {
+	case DS_ST_STOP:
+		return PL330_STATE_STOPPED;
+	case DS_ST_EXEC:
+		return PL330_STATE_EXECUTING;
+	case DS_ST_CMISS:
+		return PL330_STATE_CACHEMISS;
+	case DS_ST_UPDTPC:
+		return PL330_STATE_UPDTPC;
+	case DS_ST_WFE:
+		return PL330_STATE_WFE;
+	case DS_ST_FAULT:
+		return PL330_STATE_FAULTING;
+	case DS_ST_ATBRR:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_ATBARRIER;
+	case DS_ST_QBUSY:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_QUEUEBUSY;
+	case DS_ST_WFP:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_WFP;
+	case DS_ST_KILL:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_KILLING;
+	case DS_ST_CMPLT:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_COMPLETING;
+	case DS_ST_FLTCMP:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_FAULT_COMPLETING;
+	default:
+		return PL330_STATE_INVALID;
+	}
+}
+
+/* If the request 'req' of thread 'thrd' is currently active */
+static inline bool _req_active(struct pl330_thread *thrd,
+		struct _pl330_req *req)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id));
+
+	if (IS_FREE(req))
+		return false;
+
+	return (pc >= buf && pc <= buf + req->mc_len) ? true : false;
+}
+
+/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */
+static inline unsigned _thrd_active(struct pl330_thread *thrd)
+{
+	if (_req_active(thrd, &thrd->req[0]))
+		return 1; /* First req active */
+
+	if (_req_active(thrd, &thrd->req[1]))
+		return 2; /* Second req active */
+
+	return 0;
+}
+
+static void _stop(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+	if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
+		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+	/* Return if nothing needs to be done */
+	if (_state(thrd) == PL330_STATE_COMPLETING
+		  || _state(thrd) == PL330_STATE_KILLING
+		  || _state(thrd) == PL330_STATE_STOPPED)
+		return;
+
+	_emit_KILL(0, insn);
+
+	/* Stop generating interrupts for SEV */
+	writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
+
+	_execute_DBGINSN(thrd, insn, is_manager(thrd));
+}
+
+/* Start doing req 'idx' of thread 'thrd' */
+static bool _trigger(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	struct _pl330_req *req;
+	struct pl330_req *r;
+	struct _arg_GO go;
+	unsigned ns;
+	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+	/* Return if already ACTIVE */
+	if (_state(thrd) != PL330_STATE_STOPPED)
+		return true;
+
+	if (!IS_FREE(&thrd->req[1 - thrd->lstenq]))
+		req = &thrd->req[1 - thrd->lstenq];
+	else if (!IS_FREE(&thrd->req[thrd->lstenq]))
+		req = &thrd->req[thrd->lstenq];
+	else
+		req = NULL;
+
+	/* Return if no request */
+	if (!req || !req->r)
+		return true;
+
+	r = req->r;
+
+	if (r->cfg)
+		ns = r->cfg->nonsecure ? 1 : 0;
+	else if (readl(regs + CS(thrd->id)) & CS_CNS)
+		ns = 1;
+	else
+		ns = 0;
+
+	/* See 'Abort Sources' point-4 at Page 2-25 */
+	if (_manager_ns(thrd) && !ns)
+		dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
+			__func__, __LINE__);
+
+	go.chan = thrd->id;
+	go.addr = req->mc_bus;
+	go.ns = ns;
+	_emit_GO(0, insn, &go);
+
+	/* Set to generate interrupts for SEV */
+	writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
+
+	/* Only manager can execute GO */
+	_execute_DBGINSN(thrd, insn, true);
+
+	return true;
+}
+
+static bool _start(struct pl330_thread *thrd)
+{
+	switch (_state(thrd)) {
+	case PL330_STATE_FAULT_COMPLETING:
+		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+		if (_state(thrd) == PL330_STATE_KILLING)
+			UNTIL(thrd, PL330_STATE_STOPPED)
+
+	case PL330_STATE_FAULTING:
+		_stop(thrd);
+
+	case PL330_STATE_KILLING:
+	case PL330_STATE_COMPLETING:
+		UNTIL(thrd, PL330_STATE_STOPPED)
+
+	case PL330_STATE_STOPPED:
+		return _trigger(thrd);
+
+	case PL330_STATE_WFP:
+	case PL330_STATE_QUEUEBUSY:
+	case PL330_STATE_ATBARRIER:
+	case PL330_STATE_UPDTPC:
+	case PL330_STATE_CACHEMISS:
+	case PL330_STATE_EXECUTING:
+		return true;
+
+	case PL330_STATE_WFE: /* For RESUME, nothing yet */
+	default:
+		return false;
+	}
+}
+
+static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	while (cyc--) {
+		off += _emit_LD(dry_run, &buf[off], ALWAYS);
+		off += _emit_RMB(dry_run, &buf[off]);
+		off += _emit_ST(dry_run, &buf[off], ALWAYS);
+		off += _emit_WMB(dry_run, &buf[off]);
+	}
+
+	return off;
+}
+
+static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	while (cyc--) {
+		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_ST(dry_run, &buf[off], ALWAYS);
+		off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+	}
+
+	return off;
+}
+
+static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	while (cyc--) {
+		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_LD(dry_run, &buf[off], ALWAYS);
+		off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+	}
+
+	return off;
+}
+
+static int _bursts(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	switch (pxs->r->rqtype) {
+	case MEMTODEV:
+		off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
+		break;
+	case DEVTOMEM:
+		off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
+		break;
+	case MEMTOMEM:
+		off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
+		break;
+	default:
+		off += 0x40000000; /* Scare off the Client */
+		break;
+	}
+
+	return off;
+}
+
+/* Returns bytes consumed and updates bursts */
+static inline int _loop(unsigned dry_run, u8 buf[],
+		unsigned long *bursts, const struct _xfer_spec *pxs)
+{
+	int cyc, cycmax, szlp, szlpend, szbrst, off;
+	unsigned lcnt0, lcnt1, ljmp0, ljmp1;
+	struct _arg_LPEND lpend;
+
+	/* Max iterations possibile in DMALP is 256 */
+	if (*bursts >= 256*256) {
+		lcnt1 = 256;
+		lcnt0 = 256;
+		cyc = *bursts / lcnt1 / lcnt0;
+	} else if (*bursts > 256) {
+		lcnt1 = 256;
+		lcnt0 = *bursts / lcnt1;
+		cyc = 1;
+	} else {
+		lcnt1 = *bursts;
+		lcnt0 = 0;
+		cyc = 1;
+	}
+
+	szlp = _emit_LP(1, buf, 0, 0);
+	szbrst = _bursts(1, buf, pxs, 1);
+
+	lpend.cond = ALWAYS;
+	lpend.forever = false;
+	lpend.loop = 0;
+	lpend.bjump = 0;
+	szlpend = _emit_LPEND(1, buf, &lpend);
+
+	if (lcnt0) {
+		szlp *= 2;
+		szlpend *= 2;
+	}
+
+	/*
+	 * Max bursts that we can unroll due to limit on the
+	 * size of backward jump that can be encoded in DMALPEND
+	 * which is 8-bits and hence 255
+	 */
+	cycmax = (255 - (szlp + szlpend)) / szbrst;
+
+	cyc = (cycmax < cyc) ? cycmax : cyc;
+
+	off = 0;
+
+	if (lcnt0) {
+		off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
+		ljmp0 = off;
+	}
+
+	off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
+	ljmp1 = off;
+
+	off += _bursts(dry_run, &buf[off], pxs, cyc);
+
+	lpend.cond = ALWAYS;
+	lpend.forever = false;
+	lpend.loop = 1;
+	lpend.bjump = off - ljmp1;
+	off += _emit_LPEND(dry_run, &buf[off], &lpend);
+
+	if (lcnt0) {
+		lpend.cond = ALWAYS;
+		lpend.forever = false;
+		lpend.loop = 0;
+		lpend.bjump = off - ljmp0;
+		off += _emit_LPEND(dry_run, &buf[off], &lpend);
+	}
+
+	*bursts = lcnt1 * cyc;
+	if (lcnt0)
+		*bursts *= lcnt0;
+
+	return off;
+}
+
+static inline int _setup_loops(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs)
+{
+	struct pl330_xfer *x = pxs->x;
+	u32 ccr = pxs->ccr;
+	unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
+	int off = 0;
+
+	while (bursts) {
+		c = bursts;
+		off += _loop(dry_run, &buf[off], &c, pxs);
+		bursts -= c;
+	}
+
+	return off;
+}
+
+static inline int _setup_xfer(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs)
+{
+	struct pl330_xfer *x = pxs->x;
+	int off = 0;
+
+	/* DMAMOV SAR, x->src_addr */
+	off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
+	/* DMAMOV DAR, x->dst_addr */
+	off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
+
+	/* Setup Loop(s) */
+	off += _setup_loops(dry_run, &buf[off], pxs);
+
+	return off;
+}
+
+/*
+ * A req is a sequence of one or more xfer units.
+ * Returns the number of bytes taken to setup the MC for the req.
+ */
+static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
+		unsigned index, struct _xfer_spec *pxs)
+{
+	struct _pl330_req *req = &thrd->req[index];
+	struct pl330_xfer *x;
+	u8 *buf = req->mc_cpu;
+	int off = 0;
+
+	PL330_DBGMC_START(req->mc_bus);
+
+	/* DMAMOV CCR, ccr */
+	off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
+
+	x = pxs->r->x;
+	do {
+		/* Error if xfer length is not aligned at burst size */
+		if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
+			return -EINVAL;
+
+		pxs->x = x;
+		off += _setup_xfer(dry_run, &buf[off], pxs);
+
+		x = x->next;
+	} while (x);
+
+	/* DMASEV peripheral/event */
+	off += _emit_SEV(dry_run, &buf[off], thrd->ev);
+	/* DMAEND */
+	off += _emit_END(dry_run, &buf[off]);
+
+	return off;
+}
+
+static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
+{
+	u32 ccr = 0;
+
+	if (rqc->src_inc)
+		ccr |= CC_SRCINC;
+
+	if (rqc->dst_inc)
+		ccr |= CC_DSTINC;
+
+	/* We set same protection levels for Src and DST for now */
+	if (rqc->privileged)
+		ccr |= CC_SRCPRI | CC_DSTPRI;
+	if (rqc->nonsecure)
+		ccr |= CC_SRCNS | CC_DSTNS;
+	if (rqc->insnaccess)
+		ccr |= CC_SRCIA | CC_DSTIA;
+
+	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
+	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
+
+	ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
+	ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
+
+	ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT);
+	ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT);
+
+	ccr |= (rqc->swap << CC_SWAP_SHFT);
+
+	return ccr;
+}
+
+static inline bool _is_valid(u32 ccr)
+{
+	enum pl330_dstcachectrl dcctl;
+	enum pl330_srccachectrl scctl;
+
+	dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
+	scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
+
+	if (dcctl == DINVALID1 || dcctl == DINVALID2
+			|| scctl == SINVALID1 || scctl == SINVALID2)
+		return false;
+	else
+		return true;
+}
+
+/*
+ * Submit a list of xfers after which the client wants notification.
+ * Client is not notified after each xfer unit, just once after all
+ * xfer units are done or some error occurs.
+ */
+int pl330_submit_req(void *ch_id, struct pl330_req *r)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	struct pl330_info *pi;
+	struct _xfer_spec xs;
+	unsigned long flags;
+	void __iomem *regs;
+	unsigned idx;
+	u32 ccr;
+	int ret = 0;
+
+	/* No Req or Unacquired Channel or DMAC */
+	if (!r || !thrd || thrd->free)
+		return -EINVAL;
+
+	pl330 = thrd->dmac;
+	pi = pl330->pinfo;
+	regs = pi->base;
+
+	if (pl330->state == DYING
+		|| pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
+		dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
+			__func__, __LINE__);
+		return -EAGAIN;
+	}
+
+	/* If request for non-existing peripheral */
+	if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
+		dev_info(thrd->dmac->pinfo->dev,
+				"%s:%d Invalid peripheral(%u)!\n",
+				__func__, __LINE__, r->peri);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	if (_queue_full(thrd)) {
+		ret = -EAGAIN;
+		goto xfer_exit;
+	}
+
+	/* Prefer Secure Channel */
+	if (!_manager_ns(thrd))
+		r->cfg->nonsecure = 0;
+	else
+		r->cfg->nonsecure = 1;
+
+	/* Use last settings, if not provided */
+	if (r->cfg)
+		ccr = _prepare_ccr(r->cfg);
+	else
+		ccr = readl(regs + CC(thrd->id));
+
+	/* If this req doesn't have valid xfer settings */
+	if (!_is_valid(ccr)) {
+		ret = -EINVAL;
+		dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
+			__func__, __LINE__, ccr);
+		goto xfer_exit;
+	}
+
+	idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
+
+	xs.ccr = ccr;
+	xs.r = r;
+
+	/* First dry run to check if req is acceptable */
+	ret = _setup_req(1, thrd, idx, &xs);
+	if (ret < 0)
+		goto xfer_exit;
+
+	if (ret > pi->mcbufsz / 2) {
+		dev_info(thrd->dmac->pinfo->dev,
+			"%s:%d Trying increasing mcbufsz\n",
+				__func__, __LINE__);
+		ret = -ENOMEM;
+		goto xfer_exit;
+	}
+
+	/* Hook the request */
+	thrd->lstenq = idx;
+	thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
+	thrd->req[idx].r = r;
+
+	ret = 0;
+
+xfer_exit:
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(pl330_submit_req);
+
+static void pl330_dotask(unsigned long data)
+{
+	struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
+	struct pl330_info *pi = pl330->pinfo;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	/* The DMAC itself gone nuts */
+	if (pl330->dmac_tbd.reset_dmac) {
+		pl330->state = DYING;
+		/* Reset the manager too */
+		pl330->dmac_tbd.reset_mngr = true;
+		/* Clear the reset flag */
+		pl330->dmac_tbd.reset_dmac = false;
+	}
+
+	if (pl330->dmac_tbd.reset_mngr) {
+		_stop(pl330->manager);
+		/* Reset all channels */
+		pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
+		/* Clear the reset flag */
+		pl330->dmac_tbd.reset_mngr = false;
+	}
+
+	for (i = 0; i < pi->pcfg.num_chan; i++) {
+
+		if (pl330->dmac_tbd.reset_chan & (1 << i)) {
+			struct pl330_thread *thrd = &pl330->channels[i];
+			void __iomem *regs = pi->base;
+			enum pl330_op_err err;
+
+			_stop(thrd);
+
+			if (readl(regs + FSC) & (1 << thrd->id))
+				err = PL330_ERR_FAIL;
+			else
+				err = PL330_ERR_ABORT;
+
+			spin_unlock_irqrestore(&pl330->lock, flags);
+
+			_callback(thrd->req[1 - thrd->lstenq].r, err);
+			_callback(thrd->req[thrd->lstenq].r, err);
+
+			spin_lock_irqsave(&pl330->lock, flags);
+
+			thrd->req[0].r = NULL;
+			thrd->req[1].r = NULL;
+			MARK_FREE(&thrd->req[0]);
+			MARK_FREE(&thrd->req[1]);
+
+			/* Clear the reset flag */
+			pl330->dmac_tbd.reset_chan &= ~(1 << i);
+		}
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return;
+}
+
+/* Returns 1 if state was updated, 0 otherwise */
+int pl330_update(const struct pl330_info *pi)
+{
+	struct _pl330_req *rqdone;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+	void __iomem *regs;
+	u32 val;
+	int id, ev, ret = 0;
+
+	if (!pi || !pi->pl330_data)
+		return 0;
+
+	regs = pi->base;
+	pl330 = pi->pl330_data;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	val = readl(regs + FSM) & 0x1;
+	if (val)
+		pl330->dmac_tbd.reset_mngr = true;
+	else
+		pl330->dmac_tbd.reset_mngr = false;
+
+	val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
+	pl330->dmac_tbd.reset_chan |= val;
+	if (val) {
+		int i = 0;
+		while (i < pi->pcfg.num_chan) {
+			if (val & (1 << i)) {
+				dev_info(pi->dev,
+					"Reset Channel-%d\t CS-%x FTC-%x\n",
+						i, readl(regs + CS(i)),
+						readl(regs + FTC(i)));
+				_stop(&pl330->channels[i]);
+			}
+			i++;
+		}
+	}
+
+	/* Check which event happened i.e, thread notified */
+	val = readl(regs + ES);
+	if (pi->pcfg.num_events < 32
+			&& val & ~((1 << pi->pcfg.num_events) - 1)) {
+		pl330->dmac_tbd.reset_dmac = true;
+		dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
+		ret = 1;
+		goto updt_exit;
+	}
+
+	for (ev = 0; ev < pi->pcfg.num_events; ev++) {
+		if (val & (1 << ev)) { /* Event occured */
+			struct pl330_thread *thrd;
+			u32 inten = readl(regs + INTEN);
+			int active;
+
+			/* Clear the event */
+			if (inten & (1 << ev))
+				writel(1 << ev, regs + INTCLR);
+
+			ret = 1;
+
+			id = pl330->events[ev];
+
+			thrd = &pl330->channels[id];
+
+			active = _thrd_active(thrd);
+			if (!active) /* Aborted */
+				continue;
+
+			active -= 1;
+
+			rqdone = &thrd->req[active];
+			MARK_FREE(rqdone);
+
+			/* Get going again ASAP */
+			_start(thrd);
+
+			/* For now, just make a list of callbacks to be done */
+			list_add_tail(&rqdone->rqd, &pl330->req_done);
+		}
+	}
+
+	/* Now that we are in no hurry, do the callbacks */
+	while (!list_empty(&pl330->req_done)) {
+		rqdone = container_of(pl330->req_done.next,
+					struct _pl330_req, rqd);
+
+		list_del_init(&rqdone->rqd);
+
+		spin_unlock_irqrestore(&pl330->lock, flags);
+		_callback(rqdone->r, PL330_ERR_NONE);
+		spin_lock_irqsave(&pl330->lock, flags);
+	}
+
+updt_exit:
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	if (pl330->dmac_tbd.reset_dmac
+			|| pl330->dmac_tbd.reset_mngr
+			|| pl330->dmac_tbd.reset_chan) {
+		ret = 1;
+		tasklet_schedule(&pl330->tasks);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(pl330_update);
+
+int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+	int ret = 0, active;
+
+	if (!thrd || thrd->free || thrd->dmac->state == DYING)
+		return -EINVAL;
+
+	pl330 = thrd->dmac;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	switch (op) {
+	case PL330_OP_FLUSH:
+		/* Make sure the channel is stopped */
+		_stop(thrd);
+
+		thrd->req[0].r = NULL;
+		thrd->req[1].r = NULL;
+		MARK_FREE(&thrd->req[0]);
+		MARK_FREE(&thrd->req[1]);
+		break;
+
+	case PL330_OP_ABORT:
+		active = _thrd_active(thrd);
+
+		/* Make sure the channel is stopped */
+		_stop(thrd);
+
+		/* ABORT is only for the active req */
+		if (!active)
+			break;
+
+		active--;
+
+		thrd->req[active].r = NULL;
+		MARK_FREE(&thrd->req[active]);
+
+		/* Start the next */
+	case PL330_OP_START:
+		if (!_start(thrd))
+			ret = -EIO;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(pl330_chan_ctrl);
+
+int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	struct pl330_info *pi;
+	void __iomem *regs;
+	int active;
+	u32 val;
+
+	if (!pstatus || !thrd || thrd->free)
+		return -EINVAL;
+
+	pl330 = thrd->dmac;
+	pi = pl330->pinfo;
+	regs = pi->base;
+
+	/* The client should remove the DMAC and add again */
+	if (pl330->state == DYING)
+		pstatus->dmac_halted = true;
+	else
+		pstatus->dmac_halted = false;
+
+	val = readl(regs + FSC);
+	if (val & (1 << thrd->id))
+		pstatus->faulting = true;
+	else
+		pstatus->faulting = false;
+
+	active = _thrd_active(thrd);
+
+	if (!active) {
+		/* Indicate that the thread is not running */
+		pstatus->top_req = NULL;
+		pstatus->wait_req = NULL;
+	} else {
+		active--;
+		pstatus->top_req = thrd->req[active].r;
+		pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
+					? thrd->req[1 - active].r : NULL;
+	}
+
+	pstatus->src_addr = readl(regs + SA(thrd->id));
+	pstatus->dst_addr = readl(regs + DA(thrd->id));
+
+	return 0;
+}
+EXPORT_SYMBOL(pl330_chan_status);
+
+/* Reserve an event */
+static inline int _alloc_event(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct pl330_info *pi = pl330->pinfo;
+	int ev;
+
+	for (ev = 0; ev < pi->pcfg.num_events; ev++)
+		if (pl330->events[ev] == -1) {
+			pl330->events[ev] = thrd->id;
+			return ev;
+		}
+
+	return -1;
+}
+
+/* Upon success, returns IdentityToken for the
+ * allocated channel, NULL otherwise.
+ */
+void *pl330_request_channel(const struct pl330_info *pi)
+{
+	struct pl330_thread *thrd = NULL;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+	int chans, i;
+
+	if (!pi || !pi->pl330_data)
+		return NULL;
+
+	pl330 = pi->pl330_data;
+
+	if (pl330->state == DYING)
+		return NULL;
+
+	chans = pi->pcfg.num_chan;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		if (thrd->free) {
+			thrd->ev = _alloc_event(thrd);
+			if (thrd->ev >= 0) {
+				thrd->free = false;
+				thrd->lstenq = 1;
+				thrd->req[0].r = NULL;
+				MARK_FREE(&thrd->req[0]);
+				thrd->req[1].r = NULL;
+				MARK_FREE(&thrd->req[1]);
+				break;
+			}
+		}
+		thrd = NULL;
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return thrd;
+}
+EXPORT_SYMBOL(pl330_request_channel);
+
+/* Release an event */
+static inline void _free_event(struct pl330_thread *thrd, int ev)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct pl330_info *pi = pl330->pinfo;
+
+	/* If the event is valid and was held by the thread */
+	if (ev >= 0 && ev < pi->pcfg.num_events
+			&& pl330->events[ev] == thrd->id)
+		pl330->events[ev] = -1;
+}
+
+void pl330_release_channel(void *ch_id)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+
+	if (!thrd || thrd->free)
+		return;
+
+	_stop(thrd);
+
+	_callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
+	_callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
+
+	pl330 = thrd->dmac;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+	_free_event(thrd, thrd->ev);
+	thrd->free = true;
+	spin_unlock_irqrestore(&pl330->lock, flags);
+}
+EXPORT_SYMBOL(pl330_release_channel);
+
+/* Initialize the structure for PL330 configuration, that can be used
+ * by the client driver the make best use of the DMAC
+ */
+static void read_dmac_config(struct pl330_info *pi)
+{
+	void __iomem *regs = pi->base;
+	u32 val;
+
+	val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
+	val &= CRD_DATA_WIDTH_MASK;
+	pi->pcfg.data_bus_width = 8 * (1 << val);
+
+	val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
+	val &= CRD_DATA_BUFF_MASK;
+	pi->pcfg.data_buf_dep = val + 1;
+
+	val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
+	val &= CR0_NUM_CHANS_MASK;
+	val += 1;
+	pi->pcfg.num_chan = val;
+
+	val = readl(regs + CR0);
+	if (val & CR0_PERIPH_REQ_SET) {
+		val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
+		val += 1;
+		pi->pcfg.num_peri = val;
+		pi->pcfg.peri_ns = readl(regs + CR4);
+	} else {
+		pi->pcfg.num_peri = 0;
+	}
+
+	val = readl(regs + CR0);
+	if (val & CR0_BOOT_MAN_NS)
+		pi->pcfg.mode |= DMAC_MODE_NS;
+	else
+		pi->pcfg.mode &= ~DMAC_MODE_NS;
+
+	val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
+	val &= CR0_NUM_EVENTS_MASK;
+	val += 1;
+	pi->pcfg.num_events = val;
+
+	pi->pcfg.irq_ns = readl(regs + CR3);
+
+	pi->pcfg.periph_id = get_id(pi, PERIPH_ID);
+	pi->pcfg.pcell_id = get_id(pi, PCELL_ID);
+}
+
+static inline void _reset_thread(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct pl330_info *pi = pl330->pinfo;
+
+	thrd->req[0].mc_cpu = pl330->mcode_cpu
+				+ (thrd->id * pi->mcbufsz);
+	thrd->req[0].mc_bus = pl330->mcode_bus
+				+ (thrd->id * pi->mcbufsz);
+	thrd->req[0].r = NULL;
+	MARK_FREE(&thrd->req[0]);
+
+	thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+				+ pi->mcbufsz / 2;
+	thrd->req[1].mc_bus = thrd->req[0].mc_bus
+				+ pi->mcbufsz / 2;
+	thrd->req[1].r = NULL;
+	MARK_FREE(&thrd->req[1]);
+}
+
+static int dmac_alloc_threads(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+	struct pl330_thread *thrd;
+	int i;
+
+	/* Allocate 1 Manager and 'chans' Channel threads */
+	pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
+					GFP_KERNEL);
+	if (!pl330->channels)
+		return -ENOMEM;
+
+	/* Init Channel threads */
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		thrd->id = i;
+		thrd->dmac = pl330;
+		_reset_thread(thrd);
+		thrd->free = true;
+	}
+
+	/* MANAGER is indexed at the end */
+	thrd = &pl330->channels[chans];
+	thrd->id = chans;
+	thrd->dmac = pl330;
+	thrd->free = false;
+	pl330->manager = thrd;
+
+	return 0;
+}
+
+static int dmac_alloc_resources(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+	int ret;
+
+	/*
+	 * Alloc MicroCode buffer for 'chans' Channel threads.
+	 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
+	 */
+	pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
+				chans * pi->mcbufsz,
+				&pl330->mcode_bus, GFP_KERNEL);
+	if (!pl330->mcode_cpu) {
+		dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	ret = dmac_alloc_threads(pl330);
+	if (ret) {
+		dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
+			__func__, __LINE__);
+		dma_free_coherent(pi->dev,
+				chans * pi->mcbufsz,
+				pl330->mcode_cpu, pl330->mcode_bus);
+		return ret;
+	}
+
+	return 0;
+}
+
+int pl330_add(struct pl330_info *pi)
+{
+	struct pl330_dmac *pl330;
+	void __iomem *regs;
+	int i, ret;
+
+	if (!pi || !pi->dev)
+		return -EINVAL;
+
+	/* If already added */
+	if (pi->pl330_data)
+		return -EINVAL;
+
+	/*
+	 * If the SoC can perform reset on the DMAC, then do it
+	 * before reading its configuration.
+	 */
+	if (pi->dmac_reset)
+		pi->dmac_reset(pi);
+
+	regs = pi->base;
+
+	/* Check if we can handle this DMAC */
+	if (get_id(pi, PERIPH_ID) != PERIPH_ID_VAL
+	   || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
+		dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
+			readl(regs + PERIPH_ID), readl(regs + PCELL_ID));
+		return -EINVAL;
+	}
+
+	/* Read the configuration of the DMAC */
+	read_dmac_config(pi);
+
+	if (pi->pcfg.num_events == 0) {
+		dev_err(pi->dev, "%s:%d Can't work without events!\n",
+			__func__, __LINE__);
+		return -EINVAL;
+	}
+
+	pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
+	if (!pl330) {
+		dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	/* Assign the info structure and private data */
+	pl330->pinfo = pi;
+	pi->pl330_data = pl330;
+
+	spin_lock_init(&pl330->lock);
+
+	INIT_LIST_HEAD(&pl330->req_done);
+
+	/* Use default MC buffer size if not provided */
+	if (!pi->mcbufsz)
+		pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
+
+	/* Mark all events as free */
+	for (i = 0; i < pi->pcfg.num_events; i++)
+		pl330->events[i] = -1;
+
+	/* Allocate resources needed by the DMAC */
+	ret = dmac_alloc_resources(pl330);
+	if (ret) {
+		dev_err(pi->dev, "Unable to create channels for DMAC\n");
+		kfree(pl330);
+		return ret;
+	}
+
+	tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
+
+	pl330->state = INIT;
+
+	return 0;
+}
+EXPORT_SYMBOL(pl330_add);
+
+static int dmac_free_threads(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+	struct pl330_thread *thrd;
+	int i;
+
+	/* Release Channel threads */
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		pl330_release_channel((void *)thrd);
+	}
+
+	/* Free memory */
+	kfree(pl330->channels);
+
+	return 0;
+}
+
+static void dmac_free_resources(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+
+	dmac_free_threads(pl330);
+
+	dma_free_coherent(pi->dev, chans * pi->mcbufsz,
+				pl330->mcode_cpu, pl330->mcode_bus);
+}
+
+void pl330_del(struct pl330_info *pi)
+{
+	struct pl330_dmac *pl330;
+
+	if (!pi || !pi->pl330_data)
+		return;
+
+	pl330 = pi->pl330_data;
+
+	pl330->state = UNINIT;
+
+	tasklet_kill(&pl330->tasks);
+
+	/* Free DMAC resources */
+	dmac_free_resources(pl330);
+
+	kfree(pl330);
+	pi->pl330_data = NULL;
+}
+EXPORT_SYMBOL(pl330_del);
diff -druN linux-libre-2.6.34-gnu/arch/arm/common/sa1111.c linux-libre-2.6.35-gnu/arch/arm/common/sa1111.c
--- linux-libre-2.6.34-gnu/arch/arm/common/sa1111.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/common/sa1111.c	2010-08-01 18:11:14.000000000 -0400
@@ -951,8 +951,6 @@
 	if (!save)
 		return 0;
 
-	spin_lock_irqsave(&sachip->lock, flags);
-
 	/*
 	 * Ensure that the SA1111 is still here.
 	 * FIXME: shouldn't do this here.
@@ -969,6 +967,13 @@
 	 * First of all, wake up the chip.
 	 */
 	sa1111_wake(sachip);
+
+	/*
+	 * Only lock for write ops. Also, sa1111_wake must be called with
+	 * released spinlock!
+	 */
+	spin_lock_irqsave(&sachip->lock, flags);
+
 	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
 	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
 
@@ -1023,13 +1028,12 @@
 	struct sa1111 *sachip = platform_get_drvdata(pdev);
 
 	if (sachip) {
-		__sa1111_remove(sachip);
-		platform_set_drvdata(pdev, NULL);
-
 #ifdef CONFIG_PM
 		kfree(sachip->saved_state);
 		sachip->saved_state = NULL;
 #endif
+		__sa1111_remove(sachip);
+		platform_set_drvdata(pdev, NULL);
 	}
 
 	return 0;
diff -druN linux-libre-2.6.34-gnu/arch/arm/common/vic.c linux-libre-2.6.35-gnu/arch/arm/common/vic.c
--- linux-libre-2.6.34-gnu/arch/arm/common/vic.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/common/vic.c	2010-08-01 18:11:14.000000000 -0400
@@ -266,13 +266,53 @@
 #endif /* CONFIG_PM */
 
 static struct irq_chip vic_chip = {
-	.name	= "VIC",
-	.ack	= vic_ack_irq,
-	.mask	= vic_mask_irq,
-	.unmask	= vic_unmask_irq,
-	.set_wake = vic_set_wake,
+	.name		= "VIC",
+	.ack		= vic_ack_irq,
+	.mask		= vic_mask_irq,
+	.unmask		= vic_unmask_irq,
+	.set_wake	= vic_set_wake,
 };
 
+static void __init vic_disable(void __iomem *base)
+{
+	writel(0, base + VIC_INT_SELECT);
+	writel(0, base + VIC_INT_ENABLE);
+	writel(~0, base + VIC_INT_ENABLE_CLEAR);
+	writel(0, base + VIC_IRQ_STATUS);
+	writel(0, base + VIC_ITCR);
+	writel(~0, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void __init vic_clear_interrupts(void __iomem *base)
+{
+	unsigned int i;
+
+	writel(0, base + VIC_PL190_VECT_ADDR);
+	for (i = 0; i < 19; i++) {
+		unsigned int value;
+
+		value = readl(base + VIC_PL190_VECT_ADDR);
+		writel(value, base + VIC_PL190_VECT_ADDR);
+	}
+}
+
+static void __init vic_set_irq_sources(void __iomem *base,
+				unsigned int irq_start, u32 vic_sources)
+{
+	unsigned int i;
+
+	for (i = 0; i < 32; i++) {
+		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+}
+
 /*
  * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
  * The original cell has 32 interrupts, while the modified one has 64,
@@ -287,13 +327,7 @@
 	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
 
 	/* Disable all interrupts initially. */
-
-	writel(0, base + VIC_INT_SELECT);
-	writel(0, base + VIC_INT_ENABLE);
-	writel(~0, base + VIC_INT_ENABLE_CLEAR);
-	writel(0, base + VIC_IRQ_STATUS);
-	writel(0, base + VIC_ITCR);
-	writel(~0, base + VIC_INT_SOFT_CLEAR);
+	vic_disable(base);
 
 	/*
 	 * Make sure we clear all existing interrupts. The vector registers
@@ -302,13 +336,8 @@
 	 * the second base address, which is 0x20 in the page
 	 */
 	if (vic_2nd_block) {
-		writel(0, base + VIC_PL190_VECT_ADDR);
-		for (i = 0; i < 19; i++) {
-			unsigned int value;
+		vic_clear_interrupts(base);
 
-			value = readl(base + VIC_PL190_VECT_ADDR);
-			writel(value, base + VIC_PL190_VECT_ADDR);
-		}
 		/* ST has 16 vectors as well, but we don't enable them by now */
 		for (i = 0; i < 16; i++) {
 			void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
@@ -318,16 +347,7 @@
 		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 	}
 
-	for (i = 0; i < 32; i++) {
-		if (vic_sources & (1 << i)) {
-			unsigned int irq = irq_start + i;
-
-			set_irq_chip(irq, &vic_chip);
-			set_irq_chip_data(irq, base);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
+	vic_set_irq_sources(base, irq_start, vic_sources);
 }
 
 /**
@@ -365,37 +385,14 @@
 	}
 
 	/* Disable all interrupts initially. */
+	vic_disable(base);
 
-	writel(0, base + VIC_INT_SELECT);
-	writel(0, base + VIC_INT_ENABLE);
-	writel(~0, base + VIC_INT_ENABLE_CLEAR);
-	writel(0, base + VIC_IRQ_STATUS);
-	writel(0, base + VIC_ITCR);
-	writel(~0, base + VIC_INT_SOFT_CLEAR);
-
-	/*
-	 * Make sure we clear all existing interrupts
-	 */
-	writel(0, base + VIC_PL190_VECT_ADDR);
-	for (i = 0; i < 19; i++) {
-		unsigned int value;
-
-		value = readl(base + VIC_PL190_VECT_ADDR);
-		writel(value, base + VIC_PL190_VECT_ADDR);
-	}
+	/* Make sure we clear all existing interrupts */
+	vic_clear_interrupts(base);
 
 	vic_init2(base);
 
-	for (i = 0; i < 32; i++) {
-		if (vic_sources & (1 << i)) {
-			unsigned int irq = irq_start + i;
-
-			set_irq_chip(irq, &vic_chip);
-			set_irq_chip_data(irq, base);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
+	vic_set_irq_sources(base, irq_start, vic_sources);
 
 	vic_pm_register(base, irq_start, resume_sources);
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/acs5k_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/acs5k_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/acs5k_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/acs5k_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1232 +1,86 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Tue Dec 16 13:31:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
 CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
 CONFIG_MACH_KS8695=y
 CONFIG_MACH_DSM320=y
 CONFIG_MACH_ACS5K=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
 CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_KS8695_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
 CONFIG_PRISM54=m
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_KS8695=y
 CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_ACS5KCAN=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_KS8695_WATCHDOG=y
-# CONFIG_ALIM7101_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/acs5k_tiny_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/acs5k_tiny_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/acs5k_tiny_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/acs5k_tiny_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,940 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Tue Jan  6 13:23:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
 CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
-# CONFIG_MACH_KS8695 is not set
-# CONFIG_MACH_DSM320 is not set
 CONFIG_MACH_ACS5K=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_KS8695_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_KS8695=y
 CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_ACS5KCAN=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_KS8695_WATCHDOG=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/afeb9260_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/afeb9260_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/afeb9260_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/afeb9260_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1258 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc2
-# Tue Aug 12 22:30:16 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
 CONFIG_MACH_AFEB9260=y
-# CONFIG_MACH_USB_A9260 is not set
-# CONFIG_MACH_QIL_A9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_ATMEL_TCLIB is not set
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
 CONFIG_RTC_DRV_FM3130=y
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/am200epdkit_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/am200epdkit_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/am200epdkit_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/am200epdkit_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1148 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sun Apr 20 00:29:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="gum"
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
 CONFIG_ARCH_GUMSTIX=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-CONFIG_MACH_GUMSTIX_F=y
-CONFIG_PXA25x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-# CONFIG_PCMCIA_IOCTL is not set
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=2
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=m
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-# CONFIG_DEBUG_GPIO is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SA1100_WATCHDOG=m
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_METRONOME is not set
 CONFIG_FB_VIRTUAL=m
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=m
 CONFIG_SND_PXA2XX_AC97=m
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/am3517_evm_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/am3517_evm_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/am3517_evm_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/am3517_evm_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1245 +1,127 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Wed Oct 28 15:47:47 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
 CONFIG_MACH_OMAP3517EVM=y
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_TI_HECC=y
+CONFIG_CAN_DEBUG_DEVICES=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_TI_DAVINCI_EMAC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_FB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=4
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
+CONFIG_FB_OMAP2=y
+CONFIG_PANEL_GENERIC=y
+CONFIG_PANEL_SHARP_LQ043T1DG01=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/ams_delta_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/ams_delta_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/ams_delta_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/ams_delta_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,904 +1,82 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun  7 04:28:32 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_TREE_PREEMPT_RCU=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_LBDAF is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
 CONFIG_OMAP_MBOX_FWK=m
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=m
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-# CONFIG_OMAP_DSP_FBEXPORT is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
 CONFIG_MACH_AMS_DELTA=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
 CONFIG_OMAP_ARM_150MHZ=y
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 CONFIG_PM_RUNTIME=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_AMS_DELTA=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_ESP_CORE is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=y
 CONFIG_USB_KAWETH=y
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_AMS_DELTA=y
-# CONFIG_LEDS_OMAP_DEBUG is not set
-# CONFIG_LEDS_OMAP is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_CLEAN_4x6 is not set
-# CONFIG_FONT_CLEAN_5x8 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_MIXER_OSS=y
@@ -906,418 +84,38 @@
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
 CONFIG_SND_OMAP_SOC_AMS_DELTA=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_AMS_DELTA=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/ap4evb_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/ap4evb_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/ap4evb_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/ap4evb_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,779 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc7
-# Mon Feb  8 12:25:36 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_SHMOBILE=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# SH-Mobile System Type
-#
-# CONFIG_ARCH_SH7367 is not set
-# CONFIG_ARCH_SH7377 is not set
 CONFIG_ARCH_SH7372=y
-
-#
-# SH-Mobile Board Type
-#
 CONFIG_MACH_AP4EVB=y
-
-#
-# SH-Mobile System Configuration
-#
-
-#
-# Memory configuration
-#
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x10000000
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=8
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/assabet_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/assabet_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/assabet_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/assabet_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,904 +1,60 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar  9 13:13:30 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
 CONFIG_SA1100_ASSABET=y
-# CONFIG_ASSABET_NEPONSET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
-# CONFIG_XIP_KERNEL is not set
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_SA1100_FIR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
+# CONFIG_SERIO is not set
 CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/at572d940hfek_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/at572d940hfek_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/at572d940hfek_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/at572d940hfek_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,452 +1,68 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Fri Dec  5 10:58:47 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-AT572D940HF"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
-# CONFIG_TASK_DELAY_ACCT is not set
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
 CONFIG_CGROUPS=y
-# CONFIG_CGROUP_DEBUG is not set
-# CONFIG_CGROUP_NS is not set
-# CONFIG_CGROUP_FREEZER is not set
-# CONFIG_CGROUP_DEVICE is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-# CONFIG_USER_SCHED is not set
-CONFIG_CGROUP_SCHED=y
 CONFIG_CGROUP_CPUACCT=y
-# CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
 CONFIG_ARCH_AT572D940HF=y
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT572D940HF Board Type
-#
 CONFIG_MACH_AT572D940HFEB=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-CONFIG_NUM_SERIAL=3
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_RESOURCES_64BIT=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
 CONFIG_NET_TCPPROBE=m
-# CONFIG_HAMRADIO is not set
 CONFIG_CAN=m
 CONFIG_CAN_RAW=m
 CONFIG_CAN_BCM=m
-
-#
-# CAN Device Drivers
-#
 CONFIG_CAN_VCAN=m
 CONFIG_CAN_DEBUG_DEVICES=y
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=m
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=1
 CONFIG_MTD_CONCAT=m
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
 CONFIG_MTD_BLOCK_RO=m
 CONFIG_FTL=m
@@ -456,162 +72,52 @@
 CONFIG_RFD_FTL=m
 CONFIG_SSFDC=m
 CONFIG_MTD_OOPS=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=m
 CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=m
 CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
 CONFIG_MTD_ROM=m
 CONFIG_MTD_ABSENT=m
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
 CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=m
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-# CONFIG_MTD_DATAFLASH_OTP is not set
 CONFIG_MTD_M25P80=m
-CONFIG_M25PXX_USE_FAST_READ=y
 CONFIG_MTD_SLRAM=m
 CONFIG_MTD_PHRAM=m
 CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
 CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
 CONFIG_MTD_NAND_DISKONCHIP=m
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_ATMEL is not set
 CONFIG_MTD_NAND_NANDSIM=m
 CONFIG_MTD_NAND_PLATFORM=m
 CONFIG_MTD_ALAUDA=m
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_MTD_UBI_GLUEBI=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ICS932S401 is not set
 CONFIG_ATMEL_SSC=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
+CONFIG_SENSORS_TSL2550=m
+CONFIG_DS1682=m
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -620,10 +126,6 @@
 CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=m
 CONFIG_DAVICOM_PHY=m
 CONFIG_QSEMI_PHY=m
@@ -633,809 +135,198 @@
 CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
 CONFIG_ICPLUS_PHY=m
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=m
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
 CONFIG_USB_ZD1201=m
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
 CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
 CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
 CONFIG_USB_NET_PLUSB=m
 CONFIG_USB_NET_MCS7830=m
 CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
 # CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=m
-
-#
-# Userland interfaces
-#
 CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
 CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_GPIO=m
 CONFIG_KEYBOARD_NEWTON=m
 CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_INPUT_MOUSE=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_APPLETOUCH=m
-# CONFIG_MOUSE_BCM5974 is not set
 CONFIG_MOUSE_VSXXXAA=m
 CONFIG_MOUSE_GPIO=m
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_N_HDLC=m
-# CONFIG_RISCOM8 is not set
 CONFIG_SPECIALIX=m
-CONFIG_RIO=m
-# CONFIG_RIO_OLDPCI is not set
 CONFIG_STALDRV=y
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
 CONFIG_IPMI_DEVICE_INTERFACE=m
 CONFIG_IPMI_SI=m
 CONFIG_IPMI_WATCHDOG=m
 CONFIG_IPMI_POWEROFF=m
 CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=m
 CONFIG_R3964=m
 CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
 CONFIG_TCG_TPM=m
 CONFIG_TCG_NSC=m
 CONFIG_TCG_ATMEL=m
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_DS1682=m
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
-CONFIG_SENSORS_PCF8574=m
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_MAX6875=m
-CONFIG_SENSORS_TSL2550=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_BITBANG=m
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_AT25=m
 CONFIG_SPI_SPIDEV=m
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 # CONFIG_SND_PCM_OSS_PLUGINS is not set
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-# CONFIG_SND_AT73C213 is not set
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
 CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
 CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-CONFIG_USB_STORAGE_KARMA=y
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_KARMA=m
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
 CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
 CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=m
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
+CONFIG_MMC_AT91=m
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=m
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
 CONFIG_RTC_DRV_DS1305=y
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
 CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
 CONFIG_REISERFS_CHECK=y
 CONFIG_REISERFS_PROC_INFO=y
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-# CONFIG_JFFS2_CMODE_PRIORITY is not set
-# CONFIG_JFFS2_CMODE_SIZE is not set
 CONFIG_JFFS2_CMODE_FAVOURLZO=y
-# CONFIG_UBIFS_FS is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
@@ -1443,198 +334,25 @@
 CONFIG_LDM_PARTITION=y
 CONFIG_LDM_DEBUG=y
 CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
 CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_SECURITYFS=y
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_GF128MUL=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/at91cap9adk_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/at91cap9adk_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/at91cap9adk_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/at91cap9adk_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1218 +1,115 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Wed Jan 23 22:55:57 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91CAP9=y
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91CAP9 Board Type
-#
 CONFIG_MACH_AT91CAP9ADK=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_LOGO_LINUX_VGA16=y
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_ATMEL_USBA=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/at91rm9200dk_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/at91rm9200dk_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/at91rm9200dk_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/at91rm9200dk_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1009 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Jan  9 20:54:30 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
 CONFIG_ARCH_AT91RM9200DK=y
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_ECO920=y
-
-#
-# AT91RM9200 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMC_AT91RM9200=y
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/at91rm9200ek_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/at91rm9200ek_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/at91rm9200ek_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/at91rm9200ek_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,997 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Jan  9 20:57:31 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
 CONFIG_MACH_AT91RM9200EK=y
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
-
-#
-# AT91RM9200 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMC_AT91RM9200=y
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/at91sam9260ek_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/at91sam9260ek_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/at91sam9260ek_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/at91sam9260ek_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1039 +1,83 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:20:50 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
 CONFIG_MACH_AT91SAM9260EK=y
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/at91sam9261ek_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/at91sam9261ek_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/at91sam9261ek_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/at91sam9261ek_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1178 +1,95 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:21:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
 CONFIG_ARCH_AT91SAM9261=y
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9261 Board Type
-#
 CONFIG_MACH_AT91SAM9261EK=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_INTSRAM is not set
-# CONFIG_FB_ATMEL_STN is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/at91sam9263ek_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/at91sam9263ek_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/at91sam9263ek_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/at91sam9263ek_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1207 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:12:20 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
 CONFIG_MACH_AT91SAM9263EK=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_AT91=m
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/at91sam9g20ek_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/at91sam9g20ek_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/at91sam9g20ek_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/at91sam9g20ek_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1167 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Jun 10 15:51:52 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
 CONFIG_MACH_AT91SAM9G20EK=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_AT91_SLOW_CLOCK is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_ATMEL_PWM=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
 CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_AT91_AC97 is not set
-
-#
-# SPI devices
-#
 CONFIG_SND_AT73C213=y
-CONFIG_SND_AT73C213_TARGET_BITRATE=48000
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_ATMEL_PWM=y
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/at91sam9rlek_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/at91sam9rlek_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/at91sam9rlek_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/at91sam9rlek_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,946 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan  8 22:24:14 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
 CONFIG_ARCH_AT91SAM9RL=y
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9RL Board Type
-#
 CONFIG_MACH_AT91SAM9RLEK=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=100
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D15605 is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/ateb9200_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/ateb9200_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/ateb9200_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/ateb9200_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1311 +1,131 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Sun May  7 16:53:18 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
 CONFIG_MACH_ATEB9200=y
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=m
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
 CONFIG_MTD_BLOCK_RO=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_HID=m
+CONFIG_HID_PID=y
+CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-CONFIG_HID_FF=y
-CONFIG_HID_PID=y
-CONFIG_LOGITECH_FF=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-CONFIG_USB_NET_GL620A=y
-CONFIG_USB_NET_NET1080=y
-CONFIG_USB_NET_PLUSB=y
-CONFIG_USB_NET_RNDIS_HOST=y
-CONFIG_USB_NET_CDC_SUBSET=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-CONFIG_USB_SERIAL_CP2101=m
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=m
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
 CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_AT91RM9200=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
 CONFIG_NLS_CODEPAGE_932=m
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRC16=m
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/badge4_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/badge4_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/badge4_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/badge4_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1242 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-git3
-# Thu Jun  9 19:00:50 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
 CONFIG_SA1100_BADGE4=y
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="init=/linuxrc root=/dev/mtdblock3"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_ARTHUR=m
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=y
+CONFIG_IRLAN=y
+CONFIG_IRCOMM=y
+CONFIG_IRDA_ULTRA=y
+CONFIG_SA1100_FIR=y
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIVHCI=m
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
 CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
 CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=y
-CONFIG_IRCOMM=y
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-CONFIG_SA1100_FIR=y
-# CONFIG_VIA_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
-# CONFIG_BT_RFCOMM is not set
-# CONFIG_BT_BNEP is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-CONFIG_BT_HCIUART=m
-# CONFIG_BT_HCIUART_H4 is not set
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-CONFIG_BT_HCIVHCI=m
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_ELEKTOR=m
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=y
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_SA1100_WATCHDOG=m
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_AUDIO=y
-
-#
-# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_MIDI is not set
+CONFIG_USB_MON=y
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-CONFIG_USB_PWC=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_ZD1201 is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
 CONFIG_USB_USS720=m
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
 CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
 CONFIG_USB_SERIAL_IR=m
 CONFIG_USB_SERIAL_EDGEPORT=m
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
 CONFIG_USB_RIO500=m
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/bcmring_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/bcmring_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/bcmring_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/bcmring_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,800 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc2
-# Mon Mar 29 12:01:41 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
 # CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
-CONFIG_SHMEM=y
 # CONFIG_AIO is not set
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_PERF_EVENTS=y
 CONFIG_PERF_COUNTERS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
 CONFIG_ARCH_BCMRING=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_FPGA11107 is not set
-CONFIG_ARCH_BCM11107=y
-
-#
-# BCMRING Options
-#
 CONFIG_BCM_ZRELADDR=0x8000
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HW_PERF_EVENTS=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
 CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0e000000
 CONFIG_ZBOOT_ROM_BSS=0x0ea00000
 CONFIG_ZBOOT_ROM=y
-CONFIG_CMDLINE=""
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_BCM_UMI=y
 CONFIG_MTD_NAND_BCM_UMI_HWCS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_FILE_LOCKING is not set
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
 # CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
 CONFIG_HEADERS_CHECK=y
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_BUILD_DOCSRC is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/cam60_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/cam60_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/cam60_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/cam60_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,554 +1,74 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Mar  6 10:07:26 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
 CONFIG_MACH_CAM60=y
-# CONFIG_MACH_SAM9_L9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZBOOT_ROM_BSS=0x20004000
-# CONFIG_ZBOOT_ROM is not set
 CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
 CONFIG_MAC80211=m
-CONFIG_MAC80211_RCSIMPLE=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_RAM=m
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=m
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=m
 CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_FC_TGT_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=m
 CONFIG_DAVICOM_PHY=m
 CONFIG_QSEMI_PHY=m
@@ -557,671 +77,98 @@
 CONFIG_VITESSE_PHY=m
 CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
-# CONFIG_ICPLUS_PHY is not set
-CONFIG_FIXED_PHY=m
-# CONFIG_FIXED_MII_10_FDX is not set
-# CONFIG_FIXED_MII_100_FDX is not set
-# CONFIG_FIXED_MII_1000_FDX is not set
-CONFIG_FIXED_MII_AMNT=1
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
 CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
 CONFIG_KEYBOARD_NEWTON=m
 CONFIG_KEYBOARD_STOWAWAY=m
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_APPLETOUCH=m
 CONFIG_MOUSE_VSXXXAA=m
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_DRV_TEST=m
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_RTC_DRV_AT91SAM9_RTT=0
-CONFIG_RTC_DRV_AT91SAM9_GPBR=0
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/carmeva_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/carmeva_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/carmeva_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/carmeva_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,723 +1,47 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Tue Jun 14 12:05:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
 CONFIG_MACH_CARMEVA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_DISCONTIGMEM is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-CONFIG_ARM_AT91_ETHER_RMII=y
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
 CONFIG_MMC_DEBUG=y
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_AT91RM9200=m
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-CONFIG_JFFS_PROC_FS=y
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_NAND=y
-# CONFIG_JFFS2_FS_NOR_ECC is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+CONFIG_NFSD=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/cerfcube_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/cerfcube_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/cerfcube_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/cerfcube_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,902 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 14:19:40 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
 CONFIG_SA1100_CERF=y
-# CONFIG_SA1100_CERF_FLASH_8MB is not set
 CONFIG_SA1100_CERF_FLASH_16MB=y
-# CONFIG_SA1100_CERF_FLASH_32MB is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=m
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,38400 root=/dev/mtdblock3 rootfstype=jffs2 rw mem=32M init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/cm_t35_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/cm_t35_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/cm_t35_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/cm_t35_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1732 +1,157 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Tue Oct 13 17:10:40 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
 CONFIG_MACH_CM_T35=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=m
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_USB_ETH=m
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/cm_x2xx_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/cm_x2xx_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/cm_x2xx_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/cm_x2xx_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1369 +1,132 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Sun Feb  1 16:31:36 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
+# CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
 CONFIG_MACH_ARMCORE=y
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_DMABOUNCE=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
 CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_ITE8152=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=m
 # CONFIG_YENTA_O2 is not set
 # CONFIG_YENTA_RICOH is not set
-CONFIG_YENTA_TI=y
 # CONFIG_YENTA_ENE_TUNE is not set
 # CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
 CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=m
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
 CONFIG_MTD_NAND_GPIO=m
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_CAFE is not set
 CONFIG_MTD_NAND_CM_X270=y
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
 CONFIG_8139TOO=m
 # CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBERTAS_CS is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_UCB1400=m
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=m
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_UCB1400_CORE=m
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-CONFIG_SOC_CAMERA_MT9M111=m
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-CONFIG_VIDEO_PXA27x=m
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_PCI is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
 CONFIG_SND_PXA2XX_AC97=m
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 # CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1373,589 +136,54 @@
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_UWB is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=0
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/cm_x300_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/cm_x300_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/cm_x300_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/cm_x300_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,446 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Tue Oct 13 19:03:13 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-cm-x300"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_CPU_PXA950 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_CM_X300=y
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_XCEP is not set
-CONFIG_PXA3xx=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -450,1304 +48,141 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
-# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=0
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
 # CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
 # CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_DA903X=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
 CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_WACOM=m
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DA903X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/cns3420vb_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/cns3420vb_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/cns3420vb_defconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/configs/cns3420vb_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,72 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_PERF_EVENTS is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_IOSCHED_CFQ=m
+CONFIG_ARCH_CNS3XXX=y
+CONFIG_MACH_CNS3420VB=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,38400 mem=128M root=/dev/mmcblk0p1 ro rootwait"
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=20000
+# CONFIG_MISC_DEVICES is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+# CONFIG_ATA_SFF is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_INOTIFY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FSCACHE=y
+CONFIG_TMPFS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_CRC_CCITT=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/colibri_pxa270_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/colibri_pxa270_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/colibri_pxa270_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/colibri_pxa270_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,443 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 16:18:17 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
 CONFIG_MACH_COLIBRI=y
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_RAUMFELD_PROTO is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_PXA_FICP is not set
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -447,1290 +53,128 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-CONFIG_LIB80211_CRYPT_WEP=y
-CONFIG_LIB80211_CRYPT_CCMP=y
-CONFIG_LIB80211_CRYPT_TKIP=y
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_LE_BYTE_SWAP=y
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PXA is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-# CONFIG_HID_APPLE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=m
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-15"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/colibri_pxa300_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/colibri_pxa300_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/colibri_pxa300_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/colibri_pxa300_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1155 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 16:13:20 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
 CONFIG_MACH_COLIBRI300=y
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_RAUMFELD_PROTO is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA3xx=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="console=ttyS0,115200 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_AX88796=y
-# CONFIG_AX88796_93CX6 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/collie_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/collie_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/collie_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/collie_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,959 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Fri Apr 14 19:09:52 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-# CONFIG_SLAB is not set
-CONFIG_DOUBLEFAULT=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
 CONFIG_SLOB=y
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
 CONFIG_SA1100_COLLIE=y
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-CONFIG_PCMCIA_DEBUG=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_NODES_SHIFT=2
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
+CONFIG_PCMCIA_DEBUG=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_APM=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
 # CONFIG_MTD_CFI_I2 is not set
 CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_SHARP=y
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_LOCOMO=y
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_SHARE_IRQ is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-CONFIG_MCP=y
 CONFIG_MCP_SA11X0=y
 CONFIG_MCP_UCB1200=y
 CONFIG_MCP_UCB1200_TS=y
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_LOCOMO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_LOCOMO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
+CONFIG_ROMFS_FS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/corgi_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/corgi_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/corgi_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/corgi_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,542 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Mon Oct 20 10:12:23 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_POODLE=y
 CONFIG_MACH_CORGI=y
 CONFIG_MACH_SHEPHERD=y
 CONFIG_MACH_HUSKY=y
-# CONFIG_MACH_AKITA is not set
-# CONFIG_MACH_SPITZ is not set
-# CONFIG_MACH_BORZOI is not set
-# CONFIG_MACH_TOSA is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_SHARP_C7xx=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-# CONFIG_TOSA_BT is not set
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_LOCOMO=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
 CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -546,18 +77,9 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -566,848 +88,107 @@
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LOCOMO is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_CORGI=y
-CONFIG_KEYBOARD_SPITZ=y
-CONFIG_KEYBOARD_TOSA=y
-# CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_CORGI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-CONFIG_SENSORS_MAX1111=y
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_USB_DSBR=m
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_CORGI=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-CONFIG_BACKLIGHT_LOCOMO=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-# CONFIG_SND is not set
 CONFIG_SOUND_PRIME=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1415,479 +196,79 @@
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
 CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=y
-# CONFIG_USB_PXA25X_SMALL is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/cpu9260_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/cpu9260_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/cpu9260_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/cpu9260_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1337 +1,116 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 14:57:55 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-# CONFIG_MACH_AFEB9260 is not set
-# CONFIG_MACH_USB_A9260 is not set
-# CONFIG_MACH_QIL_A9260 is not set
 CONFIG_MACH_CPU9260=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/cpu9g20_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/cpu9g20_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/cpu9g20_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/cpu9g20_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1327 +1,116 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 15:03:43 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
 CONFIG_ARCH_AT91SAM9G20=y
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9G20 Board Type
-#
-# CONFIG_MACH_AT91SAM9G20EK is not set
 CONFIG_MACH_CPU9G20=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91SAM9X_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/cpuat91_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/cpuat91_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/cpuat91_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/cpuat91_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1315 +1,112 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Tue Jul 14 14:45:01 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_YL9200 is not set
 CONFIG_MACH_CPUAT91=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91RM9200 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/csb337_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/csb337_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/csb337_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/csb337_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,863 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan  9 22:19:24 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
 CONFIG_MACH_CSB337=y
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_CHUB is not set
-# CONFIG_MACH_HOMEMATIC is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_SWEDATMS is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-CONFIG_AT91_TIMER_HZ=128
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_AT91_DATAFLASH is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_ATMEL_SSC=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
 CONFIG_USB_SERIAL_KEYSPAN_USA28=y
@@ -871,345 +83,22 @@
 CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=y
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_AT91 is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
 # CONFIG_RTC_INTF_SYSFS is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/csb637_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/csb637_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/csb637_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/csb637_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,937 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Fri Apr  4 22:06:15 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
 CONFIG_MACH_CSB637=y
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ATMEL_PWM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
 CONFIG_USB_SERIAL_KEYSPAN_USA28=y
@@ -945,276 +79,20 @@
 CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
 CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=y
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/da8xx_omapl_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/da8xx_omapl_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/da8xx_omapl_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/da8xx_omapl_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1331 +1,126 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Thu Oct 22 12:19:19 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CP_INTC=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
-# CONFIG_ARCH_DAVINCI_DM644x is not set
-# CONFIG_ARCH_DAVINCI_DM355 is not set
-# CONFIG_ARCH_DAVINCI_DM646x is not set
 CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
-CONFIG_ARCH_DAVINCI_DA8XX=y
-# CONFIG_ARCH_DAVINCI_DM365 is not set
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_DA830_EVM=y
-CONFIG_DA830_UI=y
-CONFIG_DA830_UI_LCD=y
-# CONFIG_DA830_UI_NAND is not set
-CONFIG_MACH_DAVINCI_DA850_EVM=y
-CONFIG_DA850_UI_EXP=y
-CONFIG_DA850_UI_NONE=y
-# CONFIG_DA850_UI_RMII is not set
-CONFIG_DAVINCI_MUX=y
-# CONFIG_DAVINCI_MUX_DEBUG is not set
-# CONFIG_DAVINCI_MUX_WARNINGS is not set
 CONFIG_DAVINCI_RESET_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
 CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_DAVINCI_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
 CONFIG_REGULATOR_TPS6507X=y
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_DAVINCI is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_DA8XX=y
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
 CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
-# CONFIG_SND_DA830_SOC_EVM is not set
-# CONFIG_SND_DA850_SOC_EVM is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/davinci_all_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/davinci_all_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/davinci_all_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/davinci_all_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1835 +1,194 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc4
-# Mon Oct 12 14:13:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_AINTC=y
-CONFIG_ARCH_DAVINCI_DMx=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
 CONFIG_ARCH_DAVINCI_DM644x=y
 CONFIG_ARCH_DAVINCI_DM355=y
 CONFIG_ARCH_DAVINCI_DM646x=y
-# CONFIG_ARCH_DAVINCI_DA830 is not set
-# CONFIG_ARCH_DAVINCI_DA850 is not set
 CONFIG_ARCH_DAVINCI_DM365=y
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_EVM=y
 CONFIG_MACH_SFFSDR=y
 CONFIG_MACH_NEUROS_OSD2=y
-CONFIG_MACH_DAVINCI_DM355_EVM=y
 CONFIG_MACH_DM355_LEOPARD=y
-CONFIG_MACH_DAVINCI_DM6467_EVM=y
-CONFIG_MACH_DAVINCI_DM365_EVM=y
-CONFIG_DAVINCI_MUX=y
 CONFIG_DAVINCI_MUX_DEBUG=y
 CONFIG_DAVINCI_MUX_WARNINGS=y
 CONFIG_DAVINCI_RESET_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
 CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=m
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=m
 CONFIG_MTD_CFI_AMDSTD=m
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=m
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=m
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_DAVINCI=m
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_XFER_MODE=y
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=m
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
 CONFIG_BLK_DEV_PALMCHIP_BK3710=m
-CONFIG_BLK_DEV_IDEDMA=y
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
 CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
 CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_TI_DAVINCI_EMAC=y
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
 CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 CONFIG_INPUT_DM355EVM=m
-CONFIG_INPUT_DM365EVM=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
 CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_DAVINCI_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 CONFIG_MFD_DM355EVM_MSP=y
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_DAVINCI=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
-CONFIG_SND_DAVINCI_SOC_I2S=m
-CONFIG_SND_DAVINCI_SOC_MCASP=m
 CONFIG_SND_DAVINCI_SOC_EVM=m
 CONFIG_SND_DM6467_SOC_EVM=m
-# CONFIG_SND_DAVINCI_SOC_SFFSDR is not set
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_SPDIF=m
-CONFIG_SND_SOC_TLV320AIC3X=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=m
-# CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# DaVinci 35x and 644x USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
 CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-CONFIG_NOP_USB_XCEIV=m
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_DAVINCI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_DM355EVM is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/devkit8000_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/devkit8000_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/devkit8000_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/devkit8000_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1889 +1,184 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Thu Feb  4 15:42:56 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
 CONFIG_MACH_DEVKIT8000=y
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.1.1:home/nfsroot/current,home/nfsroot/current ip=dhcp rw noinitrd root  delay=3"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
-# CONFIG_IRLAN is not set
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=y
-# CONFIG_BT_L2CAP is not set
-# CONFIG_BT_SCO is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=40960
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_KEYBOARD_MATRIX=y
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=y
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
 CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
 CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_BOTH_ENDIAN=y
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=0
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-CONFIG_PANEL_INNOLUX_AT070TN83=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
 CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
-CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
-CONFIG_HID_GYRATION=y
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
+CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_DEBUG=y
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_AUDIO=m
+CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_ETH_EEM=y
-CONFIG_USB_GADGETFS=m
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
+# CONFIG_USB_ETH_RNDIS is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=m
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/dove_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/dove_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/dove_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/dove_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1619 +1,137 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Tue Nov 24 13:53:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_DOVE=y
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Marvell Dove Implementations
-#
 CONFIG_MACH_DOVE_DB=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
 CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_TAUROS2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
 CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
 CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
 CONFIG_CRYPTO_TEA=y
 CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/ebsa110_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/ebsa110_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/ebsa110_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/ebsa110_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,747 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 18:29:48 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 CONFIG_ARCH_EBSA110=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-
-#
-# PC-card bridges
-#
 CONFIG_I82365=m
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_PC_PCMCIA is not set
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_IRC=y
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=y
-CONFIG_IP_NF_MATCH_IPRANGE=y
-CONFIG_IP_NF_MATCH_MAC=y
-CONFIG_IP_NF_MATCH_PKTTYPE=y
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=y
-CONFIG_IP_NF_MATCH_RECENT=y
 CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_DSCP=y
-CONFIG_IP_NF_MATCH_AH_ESP=y
-CONFIG_IP_NF_MATCH_LENGTH=y
 CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_MATCH_TCPMSS=y
-CONFIG_IP_NF_MATCH_HELPER=y
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=y
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
 CONFIG_IP_NF_TARGET_LOG=y
-# CONFIG_IP_NF_TARGET_ULOG is not set
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_SAME=y
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
 CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=y
 CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP_NF_TARGET_DSCP=y
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_CLASSIFY=y
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
 CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_LIMIT=y
-CONFIG_IP6_NF_MATCH_MAC=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_MATCH_OPTS=y
 CONFIG_IP6_NF_MATCH_FRAG=y
+CONFIG_IP6_NF_MATCH_OPTS=y
 CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_MULTIPORT=y
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-CONFIG_IP6_NF_MATCH_MARK=y
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-CONFIG_IP6_NF_MATCH_AHESP=y
-CONFIG_IP6_NF_MATCH_LENGTH=y
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_MATCH_RT=y
 CONFIG_IP6_NF_FILTER=y
-# CONFIG_IP6_NF_TARGET_LOG is not set
 CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_TARGET_MARK=y
-# CONFIG_IP6_NF_RAW is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_FW_LOADER=m
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_FIFO=y
+CONFIG_PARPORT_1284=y
+CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_ARM_AM79C961A=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
 CONFIG_SOFT_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/ecbat91_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/ecbat91_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/ecbat91_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/ecbat91_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1313 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Sat Jun  9 01:30:18 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_CHUB is not set
 CONFIG_MACH_ECBAT91=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ATMEL_TCLIB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT=y
 CONFIG_MAC80211=y
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-CONFIG_IEEE80211_SOFTMAC=y
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91RM9200_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_AT91_SPI is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_ATMEL is not set
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_AT91=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+CONFIG_CRYPTO_SHA1=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/edb7211_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/edb7211_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/edb7211_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/edb7211_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,573 +1,27 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:48:12 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_ARCH_CLPS711X=y
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
 CONFIG_ARCH_EDB7211=y
-# CONFIG_ARCH_P720T is not set
-# CONFIG_ARCH_FORTUNET is not set
-CONFIG_ARCH_EP7211=y
-# CONFIG_EP72XX_ROM_BOOT is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_BLK_DEV_RAM=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_CLPS711X=y
 CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
 CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/em_x270_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/em_x270_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/em_x270_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/em_x270_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1140 +1,132 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Sun Feb  1 16:43:31 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
+# CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
 CONFIG_MACH_EM_X270=y
 CONFIG_MACH_EXEDA=y
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
 CONFIG_BT_RFCOMM=m
-# CONFIG_BT_RFCOMM_TTY is not set
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=1
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
 CONFIG_INPUT_APMPOWER=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=y
 CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PXA27x=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 # CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
 # CONFIG_TOUCHSCREEN_WM9705 is not set
-CONFIG_TOUCHSCREEN_WM9712=y
 # CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
 CONFIG_BATTERY_DA9030=y
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-CONFIG_MEDIA_TUNER_CUSTOMIZE=y
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_DMA_SG=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-CONFIG_SOC_CAMERA_MT9M111=m
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-CONFIG_VIDEO_PXA27x=m
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DA903X=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 CONFIG_FB_MBX=m
-# CONFIG_FB_MBX_DEBUG is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_DA903X=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
 CONFIG_SND_PXA2XX_SOC_EM_X270=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
@@ -1144,597 +136,59 @@
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
 CONFIG_LEDS_DA903X=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_DA903X=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=0
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/ep93xx_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/ep93xx_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/ep93xx_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/ep93xx_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1464 +1,124 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Tue May 19 12:26:49 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_EP93XX=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Cirrus EP93xx Implementation Options
-#
 CONFIG_CRUNCH=y
-
-#
-# EP93xx Platforms
-#
-# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
-CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
 CONFIG_MACH_ADSSPHERE=y
-CONFIG_MACH_EDB93XX=y
 CONFIG_MACH_EDB9301=y
 CONFIG_MACH_EDB9302=y
 CONFIG_MACH_EDB9307=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
 CONFIG_MACH_GESBC9312=y
-CONFIG_MACH_MICRO9=y
 CONFIG_MACH_MICRO9H=y
-CONFIG_MACH_MICRO9M=y
 CONFIG_MACH_MICRO9L=y
 CONFIG_MACH_TS72XX=y
-CONFIG_EP93XX_EARLY_UART1=y
-# CONFIG_EP93XX_EARLY_UART2 is not set
-# CONFIG_EP93XX_EARLY_UART3 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_ARM_VIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_TS7250 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_EP93XX_ETH=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
-CONFIG_I2C_DEBUG_CHIP=y
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_EP93XX_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_EP93XX=y
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SLAB_LEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/eseries_pxa_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/eseries_pxa_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/eseries_pxa_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/eseries_pxa_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1246 +1,118 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc8
-# Wed Dec 24 23:35:45 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
 CONFIG_ARCH_PXA_ESERIES=y
-CONFIG_MACH_E330=y
-CONFIG_MACH_E350=y
-CONFIG_MACH_E740=y
-CONFIG_MACH_E750=y
-CONFIG_MACH_E400=y
-CONFIG_MACH_E800=y
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_PWM is not set
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=m
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
 CONFIG_PXA_FICP=y
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_TMIO=m
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
 CONFIG_HERMES=m
 CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_RT2X00 is not set
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
-# CONFIG_SERIAL_PXA_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-CONFIG_MFD_TMIO=y
 CONFIG_MFD_T7L66XB=y
 CONFIG_MFD_TC6387XB=y
 CONFIG_MFD_TC6393XB=y
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
-# CONFIG_SND_PXA2XX_AC97 is not set
 # CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_PXA2XX_SOC_AC97=m
 CONFIG_SND_PXA2XX_SOC_E800=m
-CONFIG_SND_SOC_WM9712=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_PXA is not set
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_TMIO=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/ezx_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/ezx_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/ezx_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/ezx_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,451 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Mon Nov  2 13:18:50 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-ezx200910312315"
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
 CONFIG_PXA_EZX=y
-CONFIG_MACH_EZX_A780=y
-CONFIG_MACH_EZX_E680=y
-CONFIG_MACH_EZX_A1200=y
-CONFIG_MACH_EZX_A910=y
-CONFIG_MACH_EZX_E6=y
-CONFIG_MACH_EZX_E2=y
-# CONFIG_MACH_XCEP is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -458,22 +77,12 @@
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -484,21 +93,15 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -506,15 +109,7 @@
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -526,21 +121,10 @@
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -549,10 +133,6 @@
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -570,38 +150,7 @@
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -611,192 +160,42 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_OTP=y
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -804,289 +203,38 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_TOUCHSCREEN_PCAP=y
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
 CONFIG_INPUT_PCAP=y
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_EZX_PCAP=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
 CONFIG_REGULATOR_PCAP=y
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
 CONFIG_MEDIA_TUNER_CUSTOMISE=y
 # CONFIG_MEDIA_TUNER_SIMPLE is not set
 # CONFIG_MEDIA_TUNER_TDA8290 is not set
@@ -1105,650 +253,96 @@
 # CONFIG_MEDIA_TUNER_MXL5005S is not set
 # CONFIG_MEDIA_TUNER_MXL5007T is not set
 # CONFIG_MEDIA_TUNER_MC44S803 is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_SG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
 CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
 CONFIG_SOC_CAMERA_MT9M111=y
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
 CONFIG_VIDEO_PXA27x=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
 CONFIG_RADIO_TEA5764=y
-CONFIG_RADIO_TEA5764_XTAL=y
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=y
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
 CONFIG_HID_APPLE=m
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
 CONFIG_LEDS_LP3944=y
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
 CONFIG_RTC_DRV_PCAP=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
 CONFIG_CUSE=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1787,214 +381,40 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/footbridge_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/footbridge_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/footbridge_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/footbridge_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,234 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:02:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_FOOTBRIDGE=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Footbridge Implementations
-#
 CONFIG_ARCH_CATS=y
 CONFIG_ARCH_PERSONAL_SERVER=y
-# CONFIG_ARCH_EBSA285_ADDIN is not set
 CONFIG_ARCH_EBSA285_HOST=y
 CONFIG_ARCH_NETWINDER=y
-CONFIG_FOOTBRIDGE=y
-CONFIG_FOOTBRIDGE_HOST=y
-CONFIG_ARCH_EBSA285=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
+CONFIG_ATM=y
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+CONFIG_WINBOND_FIR=m
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
 CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
 CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
 CONFIG_ISAPNP=y
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=y
-
-#
-# Parallel IDE high-level drivers
-#
 CONFIG_PARIDE_PD=m
 CONFIG_PARIDE_PCD=m
 CONFIG_PARIDE_PF=m
 CONFIG_PARIDE_PT=m
 CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
 CONFIG_PARIDE_ATEN=m
 CONFIG_PARIDE_BPCK=m
-# CONFIG_PARIDE_BPCK6 is not set
 CONFIG_PARIDE_COMM=m
 CONFIG_PARIDE_DSTR=m
 CONFIG_PARIDE_FIT2=m
 CONFIG_PARIDE_FIT3=m
 CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
 CONFIG_PARIDE_EPIA=m
 CONFIG_PARIDE_FRIQ=m
 CONFIG_PARIDE_FRPW=m
@@ -236,1019 +63,65 @@
 CONFIG_PARIDE_KTTI=m
 CONFIG_PARIDE_ON20=m
 CONFIG_PARIDE_ON26=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-CONFIG_ATM=y
-# CONFIG_ATM_CLIP is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_BR2684 is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-CONFIG_WINBOND_FIR=m
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
-# CONFIG_VIA_FIR is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
 CONFIG_NET_VENDOR_3COM=y
-# CONFIG_EL1 is not set
-# CONFIG_EL2 is not set
-# CONFIG_ELPLUS is not set
-# CONFIG_EL16 is not set
-# CONFIG_EL3 is not set
-# CONFIG_3C515 is not set
 CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
 CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOATM is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_21285=y
 CONFIG_SERIAL_21285_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_21285_WATCHDOG=m
-CONFIG_977_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_DS1620=y
 CONFIG_NWBUTTON=y
 CONFIG_NWBUTTON_REBOOT=y
 CONFIG_NWFLASH=m
-CONFIG_NVRAM=m
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_BWQCAM is not set
-# CONFIG_VIDEO_CQCAM is not set
-# CONFIG_VIDEO_W9966 is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=y
+CONFIG_21285_WATCHDOG=m
+CONFIG_977_WATCHDOG=m
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=m
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_AUDIO=m
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_PWC is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=m
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
+CONFIG_USB_PRINTER=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
+CONFIG_NFSD=m
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
-# CONFIG_ACORN_PARTITION_ICS is not set
 CONFIG_ACORN_PARTITION_ADFS=y
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
-# CONFIG_ACORN_PARTITION_RISCIX is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_CODEPAGE_852=m
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/fortunet_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/fortunet_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/fortunet_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/fortunet_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,556 +1,28 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:51:10 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_HOTPLUG is not set
 CONFIG_ARCH_CLPS711X=y
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# CLPS711X/EP721X Implementations
-#
-# CONFIG_ARCH_AUTCPU12 is not set
-# CONFIG_ARCH_CDB89712 is not set
-# CONFIG_ARCH_CEIVA is not set
-# CONFIG_ARCH_CLEP7312 is not set
-# CONFIG_ARCH_EDB7211 is not set
-# CONFIG_ARCH_P720T is not set
 CONFIG_ARCH_FORTUNET=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_CLPS711X=y
 CONFIG_SERIAL_CLPS711X_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/g3evm_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/g3evm_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/g3evm_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/g3evm_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,774 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc7
-# Mon Feb  8 12:20:01 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_SHMOBILE=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# SH-Mobile System Type
-#
 CONFIG_ARCH_SH7367=y
-# CONFIG_ARCH_SH7377 is not set
-# CONFIG_ARCH_SH7372 is not set
-
-#
-# SH-Mobile Board Type
-#
 CONFIG_MACH_G3EVM=y
-
-#
-# SH-Mobile System Configuration
-#
-
-#
-# Memory configuration
-#
-CONFIG_MEMORY_START=0x50000000
-CONFIG_MEMORY_SIZE=0x08000000
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=8
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/g4evm_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/g4evm_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/g4evm_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/g4evm_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,779 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc7
-# Mon Feb  8 12:21:35 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_SHMOBILE=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# SH-Mobile System Type
-#
-# CONFIG_ARCH_SH7367 is not set
 CONFIG_ARCH_SH7377=y
-# CONFIG_ARCH_SH7372 is not set
-
-#
-# SH-Mobile Board Type
-#
 CONFIG_MACH_G4EVM=y
-
-#
-# SH-Mobile System Configuration
-#
-
-#
-# Memory configuration
-#
-CONFIG_MEMORY_START=0x40000000
-CONFIG_MEMORY_SIZE=0x08000000
-
-#
-# Timer and clock configuration
-#
-CONFIG_SH_TIMER_CMT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=8
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/h3600_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/h3600_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/h3600_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/h3600_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1163 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sat Oct 24 00:09:30 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
 CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-CONFIG_HTC_EGPIO=y
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_SA1100=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=m
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/h5000_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/h5000_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/h5000_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/h5000_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,995 +1,82 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Tue Sep 16 16:13:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
 CONFIG_MACH_H5000=y
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=y
-CONFIG_USB_PXA25X_SMALL=y
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/h7201_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/h7201_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/h7201_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/h7201_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,565 +1,27 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:11:33 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_H720X=y
-
-#
-# h720x Implementations
-#
 CONFIG_ARCH_H7201=y
-# CONFIG_ARCH_H7202 is not set
-CONFIG_CPU_H7201=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=0
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_H720X is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/h7202_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/h7202_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/h7202_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/h7202_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,729 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:15:45 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_H720X=y
-
-#
-# h720x Implementations
-#
-# CONFIG_ARCH_H7201 is not set
 CONFIG_ARCH_H7202=y
-CONFIG_CPU_H7202=y
-# CONFIG_H7202_SERIAL23 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,19200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
 CONFIG_MTD_H720X=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ETH is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_FILE_STORAGE_TEST=y
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/hackkit_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/hackkit_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/hackkit_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/hackkit_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,766 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-git3
-# Thu Jun  9 20:58:58 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
 CONFIG_SA1100_HACKKIT=y
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,115200 root=/dev/ram0 initrd=0xc0400000,8M init=/rootshell"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
 # CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/htcherald_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/htcherald_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/htcherald_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/htcherald_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1144 +1,73 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Sat Dec  5 12:16:24 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 CONFIG_ARCH_OMAP850=y
 # CONFIG_ARCH_OMAP15XX is not set
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_HTCWIZARD is not set
 CONFIG_MACH_HERALD=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_195MHZ=y
-# CONFIG_OMAP_ARM_182MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
 CONFIG_CPU_ARM925T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=m
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_PCOMP=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_ZLIB=y
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/igep0020_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/igep0020_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/igep0020_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/igep0020_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,460 +1,47 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Thu Jan  7 16:14:55 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
 CONFIG_MACH_IGEP0020=y
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -464,1183 +51,129 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
 CONFIG_BT_HCIVHCI=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-# CONFIG_MAC80211_RC_PID is not set
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
 CONFIG_MTD_ONENAND_2X_PROGRAM=y
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
 CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
 CONFIG_SSB=m
-CONFIG_SSB_SDIOHOST_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
 CONFIG_OMAP2_VRAM_SIZE=14
 # CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
 # CONFIG_OMAP2_DSS_VENC is not set
-# CONFIG_OMAP2_DSS_SDI is not set
 CONFIG_OMAP2_DSS_DSI=y
 CONFIG_OMAP2_DSS_USE_DSI_PLL=y
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
 # CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_TAAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
 CONFIG_SND_OMAP_SOC_IGEP0020=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_HID=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_TWL4030_USB is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/imote2_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/imote2_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/imote2_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/imote2_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,491 +1,62 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.34-rc2
-# Thu Apr  8 14:49:08 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-# CONFIG_SLOW_WORK_DEBUG is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE300 is not set
-# CONFIG_MACH_ZYLONITE320 is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_MACH_ARCOM_ZEUS is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_CAPC7117 is not set
-# CONFIG_ARCH_GUMSTIX is not set
 CONFIG_MACH_INTELMOTE2=y
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_RAUMFELD_RC is not set
-# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
-# CONFIG_MACH_RAUMFELD_SPEAKER is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_ICONTROL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_CPU_HAS_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_SIT_6RD is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-# CONFIG_NF_CT_PROTO_DCCP is not set
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -498,23 +69,12 @@
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -525,21 +85,15 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -547,15 +101,7 @@
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -567,21 +113,10 @@
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -590,10 +125,6 @@
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -611,215 +142,40 @@
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_BRIDGE_IGMP_SNOOPING is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
 CONFIG_IEEE802154=y
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_AR7_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_HAVE_MTD_OTP=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_OTP=y
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_DRBD is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI_MOD=y
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-CONFIG_IEEE802154_DRIVERS=y
-# CONFIG_IEEE802154_FAKEHARD is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -827,302 +183,36 @@
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-CONFIG_TOUCHSCREEN_DA9034=y
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_TIMBERDALE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=8
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_IT8761E is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_DA9030 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-CONFIG_IR_CORE=y
-CONFIG_VIDEO_IR=y
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
 CONFIG_MEDIA_TUNER_CUSTOMISE=y
 # CONFIG_MEDIA_TUNER_SIMPLE is not set
 # CONFIG_MEDIA_TUNER_TDA8290 is not set
@@ -1141,645 +231,89 @@
 # CONFIG_MEDIA_TUNER_MXL5005S is not set
 # CONFIG_MEDIA_TUNER_MXL5007T is not set
 # CONFIG_MEDIA_TUNER_MC44S803 is not set
-CONFIG_MEDIA_TUNER_MAX2165=m
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_SG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-CONFIG_VIDEO_IR_I2C=y
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-
-#
-# RDS decoders
-#
-# CONFIG_VIDEO_SAA6588 is not set
-
-#
-# Video decoders
-#
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_VPX3220 is not set
-
-#
-# Video and audio decoders
-#
-# CONFIG_VIDEO_CX25840 is not set
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
 CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
 CONFIG_SOC_CAMERA_MT9M111=y
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9T112 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_RJ54N1 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-# CONFIG_SOC_CAMERA_OV9640 is not set
 CONFIG_VIDEO_PXA27x=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
 # CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-# CONFIG_BACKLIGHT_DA903X is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=y
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-# CONFIG_SND_PXA2XX_SOC_IMOTE2 is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_SPI=y
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
 CONFIG_LEDS_LP3944=y
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DA903X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
 CONFIG_LEDS_TRIGGERS=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
 CONFIG_CUSE=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -1818,222 +352,41 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-# CONFIG_PROVE_RCU is not set
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=m
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-CONFIG_GENERIC_ATOMIC64=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/integrator_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/integrator_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/integrator_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/integrator_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,862 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 21:14:51 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_INTEGRATOR=y
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Integrator Options
-#
 CONFIG_ARCH_INTEGRATOR_AP=y
-# CONFIG_ARCH_INTEGRATOR_CP is not set
-# CONFIG_INTEGRATOR_IMPD1 is not set
-
-#
-# Processor Type
-#
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_ARM920T=y
-# CONFIG_CPU_ARM922T is not set
-# CONFIG_CPU_ARM926T is not set
-# CONFIG_CPU_ARM1020 is not set
-# CONFIG_CPU_ARM1022 is not set
-# CONFIG_CPU_ARM1026 is not set
-# CONFIG_CPU_V6 is not set
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WT=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_ICST525=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp mem=32M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_INTEGRATOR=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_AMBA_PL010=y
 CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_FB_MATROX_G is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/iop13xx_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/iop13xx_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/iop13xx_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/iop13xx_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1159 +1,124 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 16:11:03 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_IOP13XX=y
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP13XX Implementation Options
-#
-
-#
-# IOP13XX Platform Support
-#
 CONFIG_MACH_IQ81340SC=y
 CONFIG_MACH_IQ81340MC=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="ip=bootp root=nfs console=ttyS0,115200 nfsroot=,tcp,v3,wsize=8192,rsize=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfa000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
 CONFIG_SCSI_ISCSI_ATTRS=y
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
 CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
 CONFIG_ECRYPT_FS=y
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=y
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_CAST5=y
 CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/iop32x_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/iop32x_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/iop32x_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/iop32x_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1389 +1,135 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 15:49:08 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
 CONFIG_ARCH_IOP32X=y
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP32x Implementation Options
-#
-
-#
-# IOP32x Platform Types
-#
-CONFIG_MACH_EP80219=y
 CONFIG_MACH_GLANTANK=y
 CONFIG_ARCH_IQ80321=y
 CONFIG_ARCH_IQ31244=y
 CONFIG_MACH_N2100=y
-CONFIG_IOP3XX_ATU=y
-# CONFIG_MACH_EM7210 is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
 CONFIG_SATA_VITESSE=y
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-# CONFIG_MD_LINEAR is not set
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
 CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
 CONFIG_NET_DMA=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
 CONFIG_ECRYPT_FS=y
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=y
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
 CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
 CONFIG_CRYPTO_CAST5=y
 CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/iop33x_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/iop33x_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/iop33x_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/iop33x_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1391 +1,91 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 13:41:41 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
 CONFIG_ARCH_IOP33X=y
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# IOP33x Implementation Options
-#
-
-#
-# IOP33x Platform Types
-#
 CONFIG_ARCH_IQ80331=y
 CONFIG_MACH_IQ80332=y
-CONFIG_PLAT_IOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
-CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-CONFIG_MD_RAID6_PQ=y
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# See the help texts for more information.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_VXGE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_BE2NET is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IOP3XX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_BT8XX is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_INTEL_IOP_ADMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
 CONFIG_NET_DMA=y
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/ixp2000_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/ixp2000_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/ixp2000_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/ixp2000_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1113 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:39 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
 CONFIG_ARCH_IXP2000=y
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP2400/2800 Implementation Options
-#
-
-#
-# IXP2400/2800 Platforms
-#
 CONFIG_ARCH_ENP2611=y
 CONFIG_ARCH_IXDP2400=y
 CONFIG_ARCH_IXDP2800=y
-CONFIG_ARCH_IXDP2X00=y
 CONFIG_ARCH_IXDP2401=y
 CONFIG_ARCH_IXDP2801=y
-CONFIG_MACH_IXDP28X5=y
-CONFIG_ARCH_IXDP2X01=y
 # CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
+CONFIG_EEPROM_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_CS89x0=y
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
 CONFIG_ENP2611_MSF_NET=y
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
 CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
 CONFIG_HDLC_CISCO=y
 CONFIG_HDLC_FR=y
 CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
 CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_IXP2000_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IXP2000=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
+CONFIG_WATCHDOG=y
+CONFIG_IXP2000_WATCHDOG=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/ixp23xx_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/ixp23xx_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/ixp23xx_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/ixp23xx_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1408 +1,105 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:45 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_IXP23XX=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP23xx Implementation Options
-#
-
-#
-# IXP23xx Platforms
-#
 CONFIG_MACH_ESPRESSO=y
 CONFIG_MACH_IXDP2351=y
 CONFIG_MACH_ROADRUNNER=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_IWMMXT is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_EEPROM_LEGACY=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
 CONFIG_BLK_DEV_SIIMAGE=y
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
 CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
-# CONFIG_HDLC_RAW_ETH is not set
 CONFIG_HDLC_CISCO=y
 CONFIG_HDLC_FR=y
 CONFIG_HDLC_PPP=y
-
-#
-# X.25/LAPB support is disabled
-#
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
 CONFIG_DLCI=y
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_WATCHDOG=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/ixp4xx_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/ixp4xx_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/ixp4xx_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/ixp4xx_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,155 +1,13 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sun Jan 27 07:33:38 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-
-#
-# Intel IXP4xx Implementation Options
-#
-
-#
-# IXP4xx Platforms
-#
 CONFIG_MACH_NSLU2=y
 CONFIG_MACH_AVILA=y
 CONFIG_MACH_LOFT=y
@@ -160,190 +18,43 @@
 CONFIG_MACH_IXDPG425=y
 CONFIG_MACH_IXDP465=y
 CONFIG_MACH_KIXRP435=y
-CONFIG_ARCH_IXCDP1100=y
 CONFIG_ARCH_PRPMC1100=y
 CONFIG_MACH_NAS100D=y
 CONFIG_MACH_DSMG600=y
-CONFIG_ARCH_IXDP4XX=y
 CONFIG_MACH_FSG=y
-CONFIG_CPU_IXP46X=y
-CONFIG_CPU_IXP43X=y
 CONFIG_MACH_GTWX5715=y
-
-#
-# IXP4xx Options
-#
-CONFIG_DMABOUNCE=y
-# CONFIG_IXP4XX_INDIRECT_PCI is not set
 CONFIG_IXP4XX_QMGR=y
 CONFIG_IXP4XX_NPE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_IWMMXT is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
 CONFIG_NET_IPGRE=m
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
 CONFIG_IP_VS=m
 CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-# CONFIG_IP_VS_PROTO_TCP is not set
-# CONFIG_IP_VS_PROTO_UDP is not set
-# CONFIG_IP_VS_PROTO_ESP is not set
-# CONFIG_IP_VS_PROTO_AH is not set
-
-#
-# IPVS scheduler
-#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -352,102 +63,24 @@
 CONFIG_IP_VS_LBLCR=m
 CONFIG_IP_VS_DH=m
 CONFIG_IP_VS_SH=m
-# CONFIG_IP_VS_SED is not set
-# CONFIG_IP_VS_NQ is not set
-
-#
-# IPVS application helper
-#
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-
-#
-# IP: Netfilter Configuration
-#
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_RAW is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
 CONFIG_ATM=y
 CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
 CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
@@ -460,1132 +93,113 @@
 CONFIG_ECONET_NATIVE=y
 CONFIG_WAN_ROUTER=m
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_ATM is not set
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
 CONFIG_NET_SCH_TBF=m
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
 CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_SIMP is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_IXP4XX=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
+CONFIG_EEPROM_LEGACY=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
 CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
 CONFIG_SATA_VIA=y
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
 CONFIG_PATA_ARTOP=y
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
 CONFIG_PATA_IXP4XX_CF=y
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_IFB is not set
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_IXP4XX_ETH=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_WAN=y
-# CONFIG_LANMEDIA is not set
 CONFIG_HDLC=m
 CONFIG_HDLC_RAW=m
-# CONFIG_HDLC_RAW_ETH is not set
 CONFIG_HDLC_CISCO=m
 CONFIG_HDLC_FR=m
 CONFIG_HDLC_PPP=m
 CONFIG_HDLC_X25=m
-# CONFIG_PCI200SYN is not set
-# CONFIG_WANXL is not set
-# CONFIG_PC300 is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_FARSYNC is not set
-# CONFIG_DSCC4 is not set
-# CONFIG_IXP4XX_HSS is not set
 CONFIG_DLCI=m
-CONFIG_DLCI_MAX=8
 CONFIG_WAN_ROUTER_DRIVERS=m
-# CONFIG_CYCLADES_SYNC is not set
-# CONFIG_LAPBETHER is not set
-# CONFIG_X25_ASY is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
 CONFIG_ATM_TCP=m
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_IXP4XX_BEEPER=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_IXP4XX=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_I2C_IXP4XX=y
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
 CONFIG_SENSORS_W83781D=y
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_IXP4XX_WATCHDOG=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-# CONFIG_USB_ATM is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_FSG=y
-
-#
-# LED Triggers
-#
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_IDE_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
 CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_X1205=y
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/jornada720_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/jornada720_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/jornada720_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/jornada720_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,960 +1,71 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Fri Aug 21 15:41:39 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
 CONFIG_SA1100_JORNADA720=y
 CONFIG_SA1100_JORNADA720_SSP=y
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-CONFIG_SA1100_SSP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-# CONFIG_PCMCIA_SA1111 is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# FIR device drivers
-#
 CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HERMES is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
 CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP7XX=y
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_SA1111 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia Capabilities Port drivers
-#
-# CONFIG_MCP_SA11X0 is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_SA1100 is not set
 CONFIG_FB_S1D13XXX=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_LCD_HP700=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_HP700=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -993,182 +104,9 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/kafa_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/kafa_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/kafa_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/kafa_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,883 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Sun May  7 16:54:53 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-
-#
-# AT91RM9200 Implementations
-#
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KAFA=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
 CONFIG_MTD_BLOCK_RO=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_AT91_DATAFLASH=y
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/kb9202_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/kb9202_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/kb9202_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/kb9202_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1304 +1,127 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc8
-# Wed Jun  3 13:52:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
 CONFIG_AUDIT=y
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
 CONFIG_MACH_KB9200=y
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
-# CONFIG_MACH_ECBAT91 is not set
-# CONFIG_MACH_YL9200 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x10000000
 CONFIG_ZBOOT_ROM_BSS=0x20040000
-# CONFIG_ZBOOT_ROM is not set
 CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 CONFIG_ATMEL_SSC=y
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
 CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_SERIAL_ATMEL_PDC=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_UBIFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/kirkwood_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/kirkwood_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/kirkwood_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/kirkwood_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,230 +1,13 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Thu Feb  4 23:08:54 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=19
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
 CONFIG_ARCH_KIRKWOOD=y
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Marvell Kirkwood Implementations
-#
 CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
@@ -232,1645 +15,162 @@
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
-CONFIG_MACH_OPENRD=y
 CONFIG_MACH_OPENRD_BASE=y
 CONFIG_MACH_OPENRD_CLIENT=y
 CONFIG_MACH_NETSPACE_V2=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
 CONFIG_NET_DSA=y
-# CONFIG_NET_DSA_TAG_DSA is not set
-CONFIG_NET_DSA_TAG_EDSA=y
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_MV88E6XXX=y
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
 CONFIG_NET_DSA_MV88E6123_61_65=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
 CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MWL8K is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWM is not set
 CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_HERMES is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-CONFIG_VGA_ARB=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_MVSDIO=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_S35390A=y
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_MV=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_DEV_MV_CESA=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/ks8695_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/ks8695_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/ks8695_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/ks8695_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1021 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-simtec-micrel1
-# Fri Dec  5 10:30:27 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
 CONFIG_ARCH_KS8695=y
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Kendin/Micrel KS8695 Implementations
-#
 CONFIG_MACH_KS8695=y
 CONFIG_MACH_DSM320=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
 CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
 CONFIG_YENTA=y
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-CONFIG_PCCARD_NONSTATIC=y
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
 CONFIG_PRISM54=m
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_KS8695=y
 CONFIG_SERIAL_KS8695_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/lart_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/lart_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/lart_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/lart_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,875 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:53:24 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
 CONFIG_SA1100_LART=y
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,9600 root=/dev/ram"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=m
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_LART=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
-# CONFIG_IRDA_FAST_RR is not set
 CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=m
-# CONFIG_BT is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=1
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_LART=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDECD=m
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-# CONFIG_SLIP_SMART is not set
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=1
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
 CONFIG_CRC32=m
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/loki_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/loki_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/loki_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/loki_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1146 +1,120 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 03:07:49 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 CONFIG_ARCH_LOKI=y
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Marvell Loki (88RC8480) Implementations
-#
 CONFIG_MACH_LB88RC8480=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
 CONFIG_NFTL=y
-# CONFIG_NFTL_RW is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
 CONFIG_MTD_CFI_I4=y
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
 CONFIG_MTD_M25P80=y
-CONFIG_M25PXX_USE_FAST_READ=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
 CONFIG_SATA_MV=y
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
 CONFIG_I2C_MV64XXX=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
 CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
 CONFIG_XFS_FS=y
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
 CONFIG_LDM_DEBUG=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
 CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SAMPLES is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/lpd270_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/lpd270_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/lpd270_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/lpd270_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1031 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:51 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
 CONFIG_MACH_LOGICPD_PXA270=y
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-CONFIG_PXA27x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
 CONFIG_SND_PXA2XX_AC97=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/lpd7a400_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/lpd7a400_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/lpd7a400_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/lpd7a400_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,877 +1,68 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Thu Nov  3 14:15:32 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
+# CONFIG_HOTPLUG is not set
 # CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7952X is not set
+# CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_ARCH_LH7A40X=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# LH7A40X Implementations
-#
-# CONFIG_MACH_KEV7A400 is not set
 CONFIG_MACH_LPD7A400=y
-# CONFIG_MACH_LPD7A404 is not set
-CONFIG_ARCH_LH7A400=y
-CONFIG_LPD7A40X_CPLD_SSP=y
-# CONFIG_LH7A40X_CONTIGMEM is not set
-# CONFIG_LH7A40X_ONE_BANK_PER_NODE is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_SMP is not set
 CONFIG_PREEMPT=y
-CONFIG_DISCONTIGMEM=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_POLL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_ADS7843_LH7=y
-CONFIG_HAS_TOUCHSCREEN_ADS7843_LH7=y
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_LH7A40X=y
 CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT=y
-# CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ64D343 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ10D368 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_LH7A40X_AC97=y
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/lpd7a404_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/lpd7a404_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/lpd7a404_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/lpd7a404_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1127 +1,81 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Thu Mar 23 17:50:31 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=16
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7952X is not set
 CONFIG_ARCH_LH7A40X=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# LH7A40X Implementations
-#
-# CONFIG_MACH_KEV7A400 is not set
-# CONFIG_MACH_LPD7A400 is not set
 CONFIG_MACH_LPD7A404=y
-CONFIG_ARCH_LH7A404=y
-# CONFIG_LH7A40X_CONTIGMEM is not set
-# CONFIG_LH7A40X_ONE_BANK_PER_NODE is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM922T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-# CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_POLL=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_ADC_LH7=y
-CONFIG_HAS_TOUCHSCREEN_ADC_LH7=y
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_LH7A40X=y
 CONFIG_SERIAL_LH7A40X_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT=y
-# CONFIG_FB_ARMCLCD_SHARP_LQ057Q3DC02 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ64D343 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ10D368 is not set
-# CONFIG_FB_ARMCLCD_SHARP_LQ121S1DG41 is not set
-# CONFIG_FB_ARMCLCD_AUO_A070VW01_WIDE is not set
-# CONFIG_FB_ARMCLCD_HITACHI is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_ARMAACI is not set
-CONFIG_SND_LH7A40X_AC97=y
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
 CONFIG_USB_STORAGE_DATAFAB=y
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_LH7=y
-CONFIG_USB_LH7=y
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=y
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/lubbock_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/lubbock_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/lubbock_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/lubbock_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,800 +1,56 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:18:13 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
 CONFIG_ARCH_LUBBOCK=y
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_LUBBOCK=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_SA1111=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-CONFIG_USB_PXA2XX_SMALL=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_SA1100 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-CONFIG_USB_G_SERIAL=y
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
+CONFIG_USB_G_SERIAL=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/lusl7200_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/lusl7200_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/lusl7200_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/lusl7200_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,453 +1,23 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:24:38 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_FIQ=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+# CONFIG_HOTPLUG is not set
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_L7200=y
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM720T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_LV4T=y
-CONFIG_CPU_CACHE_V4=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WT=y
-CONFIG_CPU_TLB_V4WT=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x00010000
 CONFIG_ZBOOT_ROM_BSS=0xf03e0000
 CONFIG_ZBOOT_ROM=y
 CONFIG_CMDLINE="console=tty0 console=ttyLU1,115200 root=/dev/ram initrd=0xf1000000,0x005dac7b mem=32M"
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
 # CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/magician_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/magician_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/magician_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/magician_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,432 +1,52 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Jan 30 12:42:03 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
 CONFIG_MACH_H4700=y
 CONFIG_MACH_MAGICIAN=y
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_PWM=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="keepinitrd"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
-# CONFIG_IRNET is not set
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
 CONFIG_IRDA_DEBUG=y
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -436,1101 +56,127 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_PXA27x is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
-# CONFIG_SERIAL_PXA_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_DS1WM=y
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=y
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
 CONFIG_BATTERY_DS2760=y
-# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
 CONFIG_MFD_ASIC3=y
 CONFIG_HTC_EGPIO=y
 CONFIG_HTC_PASIC3=y
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_BQ24022=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 CONFIG_FB_PXA_OVERLAY=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_PXA2XX_LIB=m
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_HID=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=m
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
 CONFIG_USB_GPIO_VBUS=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 CONFIG_RTC_DEBUG=y
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-CONFIG_REGULATOR_BQ24022=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
 CONFIG_NLS_CODEPAGE_1251=m
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/mainstone_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/mainstone_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/mainstone_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/mainstone_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,794 +1,55 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sat Mar 26 20:00:45 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
 CONFIG_MACH_MAINSTONE=y
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA27x=y
-CONFIG_IWMMXT=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/mini2440_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/mini2440_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/mini2440_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/mini2440_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,383 +1,38 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Wed May 20 12:29:51 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
 CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_CPU_S3C244X=y
-CONFIG_S3C24XX_PWM=y
-CONFIG_S3C24XX_GPIO_EXTRA=0
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
 CONFIG_S3C_ADC=y
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
-CONFIG_CPU_LLSERIAL_S3C2440=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_WATCHDOG is not set
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-
-#
-# S3C2400 Machines
-#
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
-# CONFIG_MACH_TCT_HAMMER is not set
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_JIVE is not set
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_SMDK2412 is not set
-# CONFIG_MACH_VSTMS is not set
-CONFIG_CPU_S3C2440=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-# CONFIG_MACH_AT2440EVB is not set
+CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y
-
-#
-# S3C2442 Machines
-#
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
@@ -385,82 +40,21 @@
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_STP=m
-CONFIG_GARP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -470,10 +64,6 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=m
@@ -484,298 +74,60 @@
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
 CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
 CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
 CONFIG_INFTL=y
 CONFIG_RFD_FTL=y
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
 CONFIG_MTD_LPDDR=y
-CONFIG_MTD_QINFO_PROBE=y
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_SENSORS_TSL2550=m
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
 CONFIG_HOSTAP=m
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
 CONFIG_ZD1211RW=m
 CONFIG_ZD1211RW_DEBUG=y
-# CONFIG_RT2X00 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -784,1065 +136,159 @@
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C2440=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=128
 CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
 CONFIG_IPMI_DEVICE_INTERFACE=m
 CONFIG_IPMI_SI=m
 CONFIG_IPMI_WATCHDOG=m
 CONFIG_IPMI_POWEROFF=m
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_TSL2550=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_S3C24XX=y
-# CONFIG_SPI_S3C24XX_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IBMAEM is not set
-# CONFIG_SENSORS_IBMPEX is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=m
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_S3C2410_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_AU0828 is not set
-CONFIG_SOC_CAMERA=m
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-# CONFIG_SOC_CAMERA_MT9M111 is not set
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-CONFIG_SOC_CAMERA_PLATFORM=m
-# CONFIG_SOC_CAMERA_OV772X is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-CONFIG_USB_GSPCA_ZC3XX=m
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 CONFIG_SND_SOC=y
 CONFIG_SND_S3C24XX_SOC=y
-CONFIG_SND_S3C24XX_SOC_I2S=y
-# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
-CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_L3=y
-CONFIG_SND_SOC_UDA134X=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
 CONFIG_HID_PID=y
 CONFIG_USB_HIDDEV=y
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_TOPSEED=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
 CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=m
-# CONFIG_USB_STORAGE_FREECOM is not set
 CONFIG_USB_STORAGE_ISD200=m
 CONFIG_USB_STORAGE_USBAT=m
 CONFIG_USB_STORAGE_SDDR09=m
 CONFIG_USB_STORAGE_SDDR55=m
 CONFIG_USB_STORAGE_JUMPSHOT=m
 CONFIG_USB_STORAGE_ALAUDA=m
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 CONFIG_USB_SERIAL_CP210X=m
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
 CONFIG_USB_SERIAL_SPCP8X5=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
 CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SPI=y
 CONFIG_MMC_S3C=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_S3C24XX=y
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
 CONFIG_ROMFS_BACKED_BY_BOTH=y
-CONFIG_ROMFS_ON_BLOCK=y
-CONFIG_ROMFS_ON_MTD=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1882,165 +328,41 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
 CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_FILE_CAPABILITIES=y
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
 CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=y
@@ -2048,7 +370,6 @@
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -2056,41 +377,8 @@
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_CRC7=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/mmp2_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/mmp2_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/mmp2_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/mmp2_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1194 +1,88 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Tue Jan  5 13:55:22 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
 CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_MACH_TAVOREVB is not set
-
-#
-# Marvell PXA168/910/MMP2 Implmentations
-#
-# CONFIG_MACH_ASPENITE is not set
-# CONFIG_MACH_ZYLONITE2 is not set
-# CONFIG_MACH_TTC_DKB is not set
 CONFIG_MACH_FLINT=y
-CONFIG_CPU_MMP2=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
+CONFIG_MACH_MARVELL_JASPER=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M user_debug=255"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255"
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_PXA3xx is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-CONFIG_MFD_88PM8607=y
+CONFIG_MFD_MAX8925=y
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_MAX8660=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-CONFIG_REGULATOR_88PM8607=y
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_REGULATOR_MAX8649=y
+CONFIG_REGULATOR_MAX8925=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_MAX8925=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXT4_USE_FOR_EXT23=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
+CONFIG_RTC_DRV_MAX8925=y
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
+CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/msm_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/msm_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/msm_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/msm_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,894 +1,72 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Wed Nov  7 01:36:45 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_GPIOS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_PANIC_TIMEOUT=0
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_GOLDFISH is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
 CONFIG_ARCH_MSM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# MSM7200 Board Type
-#
 CONFIG_MACH_HALIBUT=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-# CONFIG_SERIAL_MSM_NOINIT is not set
-CONFIG_MSM_SMD=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_MSM_NAND=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_GOLDFISH_NAND is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-CONFIG_MSM_RMNET=y
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_MEP is not set
-CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_UINPUT is not set
-CONFIG_INPUT_GPIO=y
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DCC_TTY=y
-# CONFIG_GOLDFISH_TTY is not set
-CONFIG_BINDER=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_MSM=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCA9633=y
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-CONFIG_SENSORS_AKM8976=y
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_LOW_MEMORY_KILLER=y
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_MSM=y
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# USB Function Support
-#
-CONFIG_USB_FUNCTION=y
-CONFIG_USB_FUNCTION_MSM_HSUSB=y
-# CONFIG_USB_FUNCTION_NULL is not set
-# CONFIG_USB_FUNCTION_ZERO is not set
-# CONFIG_USB_FUNCTION_LOOPBACK is not set
-CONFIG_USB_FUNCTION_ADB=y
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Android
-#
-# CONFIG_ANDROID_GADGET is not set
-# CONFIG_ANDROID_RAM_CONSOLE is not set
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_VIBRATOR=y
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/mv78xx0_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/mv78xx0_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/mv78xx0_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/mv78xx0_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1687 +1,140 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May  4 14:22:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
 CONFIG_ARCH_MV78XX0=y
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Marvell MV78xx0 Implementations
-#
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
 CONFIG_MACH_TERASTATION_WXL=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
-CONFIG_CPU_FEROCEON_OLD_ID=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/mx1_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/mx1_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/mx1_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/mx1_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1104 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr  8 11:11:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_ARCH_MX1ADS=y
-
-#
-# Freescale MXC Implementations
-#
 CONFIG_ARCH_MX1=y
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX1 platforms:
-#
-CONFIG_MACH_MXLADS=y
+CONFIG_ARCH_MX1ADS=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MXC_IRQ_PRIOR=y
-# CONFIG_MXC_PWM is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_IMX=y
-CONFIG_USB_IMX=y
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/mx21_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/mx21_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/mx21_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/mx21_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1169 +1,97 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Tue Apr 14 16:58:09 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
 CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-CONFIG_MACH_MX21=y
-# CONFIG_MACH_MX27 is not set
-
-#
-# MX2 platforms:
-#
 CONFIG_MACH_MX21ADS=y
-# CONFIG_MXC_IRQ_PRIOR is not set
 CONFIG_MXC_PWM=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_NONISA_IRQ=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_IMX=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/mx27_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/mx27_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/mx27_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/mx27_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1273 +1,121 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Fri Jul 24 16:08:06 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
 CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-# CONFIG_MACH_MX21 is not set
 CONFIG_MACH_MX27=y
-
-#
-# MX2 platforms:
-#
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
-CONFIG_MACH_PCM970_BASEBOARD=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
 CONFIG_FEC=y
-# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_GPIO is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_IMX=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
 # CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/mx31pdk_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/mx31pdk_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/mx31pdk_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/mx31pdk_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,772 +1,44 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Sun Oct 26 15:55:29 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
 # CONFIG_MACH_MX31ADS is not set
-# CONFIG_MACH_PCM037 is not set
-# CONFIG_MACH_MX31LITE is not set
 CONFIG_MACH_MX31_3DS=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_PCBC is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/mx3_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/mx3_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/mx3_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/mx3_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,203 +1,17 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sun Nov  1 22:56:24 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX25 is not set
-CONFIG_ARCH_MX3=y
-# CONFIG_ARCH_MXC91231 is not set
-CONFIG_ARCH_MX31=y
-CONFIG_ARCH_MX35=y
-
-#
-# MX3 platforms:
-#
-CONFIG_MACH_MX31ADS=y
 CONFIG_MACH_MX31ADS_WM1133_EV1=y
 CONFIG_MACH_PCM037=y
 CONFIG_MACH_PCM037_EET=y
@@ -212,1001 +26,98 @@
 CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
-CONFIG_ARCH_HAS_RNGA=y
-CONFIG_ARCH_MXC_IOMUX_V3=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_NAND_MXC=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
 CONFIG_DNET=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC=y
-# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
 CONFIG_W1_SLAVE_THERM=y
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-CONFIG_MFD_WM8350=y
-CONFIG_MFD_WM8350_CONFIG_MODE_0=y
-CONFIG_MFD_WM8352_CONFIG_MODE_0=y
 CONFIG_MFD_WM8350_I2C=y
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_WM8350=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
 # CONFIG_VIDEO_ALLOW_V4L1 is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
 CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_MT9M001=y
 CONFIG_SOC_CAMERA_MT9M111=y
 CONFIG_SOC_CAMERA_MT9T031=y
 CONFIG_SOC_CAMERA_MT9V022=y
 CONFIG_SOC_CAMERA_TW9910=y
-# CONFIG_SOC_CAMERA_PLATFORM is not set
 CONFIG_SOC_CAMERA_OV772X=y
-CONFIG_MX3_VIDEO=y
 CONFIG_VIDEO_MX3=y
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-CONFIG_FB_MX3=y
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_MXC=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_MX3_IPU=y
-CONFIG_MX3_IPU_IRQS=4
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/mx51_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/mx51_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/mx51_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/mx51_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,528 +1,61 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Tue Feb  2 15:20:48 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
 CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX1 is not set
-# CONFIG_ARCH_MX2 is not set
-# CONFIG_ARCH_MX25 is not set
-# CONFIG_ARCH_MX3 is not set
-# CONFIG_ARCH_MXC91231 is not set
 CONFIG_ARCH_MX5=y
-CONFIG_ARCH_MX51=y
-
-#
-# MX5 platforms:
-#
 CONFIG_MACH_MX51_BABBAGE=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-CONFIG_MXC_TZIC=y
-# CONFIG_MXC_PWM is not set
-CONFIG_ARCH_MXC_IOMUX_V3=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
 CONFIG_PM_TEST_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_QSEMI_PHY=y
@@ -541,746 +74,98 @@
 CONFIG_MDIO_GPIO=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 CONFIG_FEC=y
-# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
 CONFIG_MOUSE_PS2_ELANTECH=y
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=m
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
 CONFIG_I2C_ALGOBIT=m
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_IMX is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
 CONFIG_MMC_BLOCK=m
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=m
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_MXC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_MXC is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=y
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
 CONFIG_SECURITYFS=y
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_RATIONAL=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/n770_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/n770_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/n770_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/n770_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1421 +1,138 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8-omap1
-# Fri Jan 18 10:21:06 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_BOOT_TAG=y
-CONFIG_OMAP_BOOT_REASON=y
-CONFIG_OMAP_COMPONENT_VERSION=y
-CONFIG_OMAP_GPIO_SWITCH=y
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_STI=y
-CONFIG_OMAP_STI_CONSOLE=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
 CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
 CONFIG_MACH_NOKIA770=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
 CONFIG_OMAP_ARM_216MHZ=y
-# CONFIG_OMAP_ARM_192MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=y
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
 CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=y
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-CONFIG_BT_HCIBRF6150=y
-# CONFIG_BT_HCIH4P is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 # CONFIG_PROC_EVENTS is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_OMAP_HW=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-CONFIG_SENSORS_TLV320AIC23=y
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCDC_EXTERNAL=y
 CONFIG_FB_OMAP_LCDC_HWA742=y
-# CONFIG_FB_OMAP_LCDC_BLIZZARD is not set
 CONFIG_FB_OMAP_MANUAL_UPDATE=y
 CONFIG_FB_OMAP_LCD_MIPID=y
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
 CONFIG_SND_DUMMY=y
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_OMAP_AIC23=y
-# CONFIG_SND_OMAP_TSC2101 is not set
-# CONFIG_SND_SX1 is not set
-# CONFIG_SND_OMAP_TSC2102 is not set
-# CONFIG_SND_OMAP24XX_EAC is not set
-
-#
-# SPI devices
-#
-
-#
-# USB devices
-#
 CONFIG_SND_USB_AUDIO=y
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
 CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_FILE_STORAGE_TEST=y
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-CONFIG_CBUS=y
-CONFIG_CBUS_TAHVO=y
-CONFIG_CBUS_TAHVO_USER=y
-CONFIG_CBUS_TAHVO_USB=y
-# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set
-CONFIG_CBUS_RETU=y
-CONFIG_CBUS_RETU_USER=y
-CONFIG_CBUS_RETU_POWERBUTTON=y
-CONFIG_CBUS_RETU_RTC=y
-CONFIG_CBUS_RETU_WDT=y
-# CONFIG_CBUS_RETU_HEADSET is not set
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-CONFIG_OMAP_DSP_FBEXPORT=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_LOWMEM is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/n8x0_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/n8x0_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/n8x0_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/n8x0_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1226 +1,94 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Thu Aug  6 22:17:23 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
 # CONFIG_OMAP_MCBSP is not set
 CONFIG_OMAP_MBOX_FWK=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-CONFIG_MACH_OMAP2_TUSB6010=y
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-CONFIG_MACH_NOKIA_N800=y
-CONFIG_MACH_NOKIA_N810=y
-CONFIG_MACH_NOKIA_N810_WIMAX=y
 CONFIG_MACH_NOKIA_N8X0=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
-# CONFIG_ZBOOT_ROM is not set
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 console=ttyS2,115200n8 debug earlyprintk rootwait"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_PM_OPS=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_HAVE_MTD_OTP=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
 CONFIG_MTD_ONENAND_OTP=y
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_CHARDEV is not set
 # CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_SMBUS is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_MENELAUS=y
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_DUMMY is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_TUSB6010=y
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_INVENTRA_DMA is not set
-# CONFIG_USB_TI_CPPI_DMA is not set
-CONFIG_USB_TUSB_OMAP_DMA=y
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_ETH=m
 CONFIG_USB_ETH_EEM=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/neocore926_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/neocore926_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/neocore926_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/neocore926_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1301 +1,104 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Jul 29 10:46:54 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91SAM9G20 is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
-# CONFIG_MACH_AT91SAM9263EK is not set
-# CONFIG_MACH_USB_A9263 is not set
 CONFIG_MACH_NEOCORE926=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
 CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_HW=y
-# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
 CONFIG_ATMEL_PWM=y
 CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_TCB_CLKSRC=y
-CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 # CONFIG_SERIAL_ATMEL_PDC is not set
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_ATMEL_PWM is not set
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
+CONFIG_MMC_AT91=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/neponset_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/neponset_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/neponset_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/neponset_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1141 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar  9 14:28:26 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
 CONFIG_SA1100_ASSABET=y
 CONFIG_ASSABET_NEPONSET=y
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-CONFIG_SA1111=y
-CONFIG_DMABOUNCE=y
-CONFIG_FORCE_MAX_ZONEORDER=9
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
 CONFIG_PCMCIA_SA1111=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x80000
 CONFIG_ZBOOT_ROM_BSS=0xc1000000
 CONFIG_ZBOOT_ROM=y
 CONFIG_CMDLINE="console=ttySA0,38400n8 cpufreq=221200 rw root=/dev/mtdblock2 mtdparts=sa1100:512K(boot),1M(kernel),2560K(initrd),4M(root) load_ramdisk=1 prompt_ramdisk=0 mem=32M noinitrd initrd=0xc0800000,3M"
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_SA1110=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
 CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 CONFIG_NET_VENDOR_SMC=y
-# CONFIG_WD80x3 is not set
-# CONFIG_ULTRA is not set
-CONFIG_SMC91X=y
 CONFIG_SMC9194=y
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
+CONFIG_SMC91X=y
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_SA1111=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_SA1111=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_DIGI is not set
-# CONFIG_ESPSERIAL is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_CS=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_SA1100_WATCHDOG=m
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SA1100_WATCHDOG=m
 CONFIG_FB=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
+# CONFIG_USB_HID is not set
 CONFIG_USB=m
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# USB Host Controller Drivers
-#
+CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-CONFIG_USB_MOUSE=m
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=m
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB ATM/DSL drivers
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_SCHEDSTATS is not set
-CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/netwinder_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/netwinder_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/netwinder_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/netwinder_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1043 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 15:18:42 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_ARCH_FOOTBRIDGE=y
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Footbridge Implementations
-#
-# CONFIG_ARCH_CATS is not set
-# CONFIG_ARCH_PERSONAL_SERVER is not set
-# CONFIG_ARCH_EBSA285_ADDIN is not set
-# CONFIG_ARCH_EBSA285_HOST is not set
 CONFIG_ARCH_NETWINDER=y
-CONFIG_FOOTBRIDGE=y
-CONFIG_FOOTBRIDGE_HOST=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-# CONFIG_LEDS_TIMER is not set
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=0x301"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-CONFIG_PARPORT_PC_SUPERIO=y
-# CONFIG_PARPORT_ARC is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK_DEV=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=y
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
 CONFIG_IP_NF_QUEUE=y
 CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-# CONFIG_IP_NF_MATCH_HELPER is not set
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-# CONFIG_IP_NF_NAT is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC_SUPERIO=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_SL82C105=y
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
 CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
 CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
 CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
 CONFIG_NE2K_PCI=y
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_SERIAL=y
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_21285 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_21285_WATCHDOG is not set
-CONFIG_977_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
 CONFIG_DS1620=y
 CONFIG_NWBUTTON=y
 CONFIG_NWBUTTON_REBOOT=y
 CONFIG_NWFLASH=y
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
+CONFIG_WATCHDOG=y
+CONFIG_977_WATCHDOG=y
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_VIA82CXXX is not set
 CONFIG_SOUND_OSS=y
 CONFIG_SOUND_TRACEINIT=y
 CONFIG_SOUND_DMAP=y
-# CONFIG_SOUND_AD1816 is not set
-# CONFIG_SOUND_AD1889 is not set
-# CONFIG_SOUND_SGALAXY is not set
-# CONFIG_SOUND_ADLIB is not set
-# CONFIG_SOUND_ACI_MIXER is not set
-# CONFIG_SOUND_CS4232 is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_GUS is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_NM256 is not set
-# CONFIG_SOUND_MAD16 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_AWE32_SYNTH is not set
-# CONFIG_SOUND_MAUI is not set
 CONFIG_SOUND_YM3812=y
-# CONFIG_SOUND_OPL3SA1 is not set
-# CONFIG_SOUND_OPL3SA2 is not set
-# CONFIG_SOUND_YMFPCI is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
 CONFIG_SOUND_WAVEARTIST=y
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_AD1980 is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/netx_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/netx_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/netx_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/netx_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,923 +1,86 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc6
-# Tue Jun  6 15:26:53 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_NETX=y
-
-#
-# NetX Implementations
-#
 CONFIG_MACH_NXDKN=y
 CONFIG_MACH_NXDB500=y
 CONFIG_MACH_NXEB500HMI=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_VIC=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySMX0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
 CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_INET_XFRM_TUNNEL=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-# CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
 CONFIG_IP_NF_QUEUE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP6_NF_QUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_NET_NETX=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_NETX=y
 CONFIG_SERIAL_NETX_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_NETX=m
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/nhk8815_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/nhk8815_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/nhk8815_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/nhk8815_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,388 +1,42 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Tue Jun 23 22:57:16 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
 CONFIG_ARCH_NOMADIK=y
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Nomadik boards
-#
 CONFIG_MACH_NOMADIK_8815NHK=y
-CONFIG_NOMADIK_8815=y
-CONFIG_I2C_BITBANG_8815NHK=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=y
 CONFIG_NET_IPGRE=y
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -392,924 +46,87 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_TESTS=m
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_VERIFY_WRITE=y
 CONFIG_MTD_NAND_NOMADIK=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
 CONFIG_NETCONSOLE=m
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-# CONFIG_GPIO_PL061 is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_WACOM is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
 CONFIG_CIFS_WEAK_PW_HASH=y
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/ns9xxx_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/ns9xxx_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/ns9xxx_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/ns9xxx_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -3,26 +3,11 @@
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_NS9XXX=y
-CONFIG_MACH_A9M9360=y
-CONFIG_MACH_A9M9750=y
-CONFIG_MACH_CC7UCAMRY=y
-CONFIG_MACH_CC9C=y
-CONFIG_MACH_CC9P9210=y
-CONFIG_MACH_CC9P9210JS=y
-CONFIG_MACH_CC9P9215=y
-CONFIG_MACH_CC9P9215JS=y
 CONFIG_MACH_CC9P9360DEV=y
 CONFIG_MACH_CC9P9360JS=y
-CONFIG_MACH_CC9P9360VAL=y
-CONFIG_MACH_CC9P9750DEV=y
-CONFIG_MACH_CC9P9750VAL=y
-CONFIG_MACH_CCW9C=y
-CONFIG_MACH_INC20OTTER=y
-CONFIG_MACH_OTTER=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_FPE_NWFPE=y
@@ -39,24 +24,18 @@
 CONFIG_MTD_JEDECPROBE=m
 CONFIG_MTD_CFI_AMDSTD=m
 CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
-CONFIG_NS9XXX_ETH=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_NS921X=y
-CONFIG_SERIAL_NS921X_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_ADC_NS9215=m
 CONFIG_I2C=m
 CONFIG_I2C_GPIO=m
 # CONFIG_HWMON is not set
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_DEBUG is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
@@ -65,7 +44,6 @@
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_NS9215=m
 CONFIG_EXT2_FS=m
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=m
@@ -73,7 +51,6 @@
 CONFIG_ROOT_NFS=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/nuc910_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/nuc910_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/nuc910_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/nuc910_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,904 +1,60 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Wed Jun 10 22:09:25 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
 CONFIG_ARCH_W90X900=y
-CONFIG_CPU_W90P910=y
-
-#
-# W90P910 Machines
-#
-CONFIG_MACH_W90P910EVB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_STACKTRACE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/nuc950_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/nuc950_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/nuc950_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/nuc950_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,972 +1,76 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc7
-# Tue Nov 17 12:31:33 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 CONFIG_ARCH_W90X900=y
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CPU_NUC950=y
-
-#
-# W90P910 Machines
-#
 # CONFIG_MACH_W90P910EVB is not set
-
-#
-# NUC950 Machines
-#
 CONFIG_MACH_W90P950EVB=y
-
-#
-# NUC960 Machines
-#
-# CONFIG_MACH_W90N960EVB is not set
-
-#
-# NUC932 Machines
-#
-# CONFIG_MACH_NUC932EVB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_NUC900=y
 CONFIG_GPM1040A0_320X240=y
 CONFIG_FB_NUC900_DEBUG=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/nuc960_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/nuc960_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/nuc960_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/nuc960_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,921 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc7
-# Tue Nov 17 12:20:11 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
 CONFIG_USER_NS=y
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 CONFIG_ARCH_W90X900=y
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_CPU_NUC960=y
-
-#
-# W90P910 Machines
-#
 # CONFIG_MACH_W90P910EVB is not set
-
-#
-# NUC950 Machines
-#
-# CONFIG_MACH_W90P950EVB is not set
-
-#
-# NUC960 Machines
-#
 CONFIG_MACH_W90N960EVB=y
-
-#
-# NUC932 Machines
-#
-# CONFIG_MACH_NUC932EVB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_2430sdp_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_2430sdp_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_2430sdp_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_2430sdp_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1303 +1,136 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:47:37 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
 # CONFIG_OMAP_MUX_WARNINGS is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
-# CONFIG_ARCH_OMAP2420 is not set
 CONFIG_ARCH_OMAP2430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
 CONFIG_MACH_OMAP_2430SDP=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_OMAP is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_GPIO=y
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MENELAUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_OMAP24XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_CORE=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
-CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 243x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-CONFIG_USB_MUSB_LOGLEVEL=0
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_3430sdp_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_3430sdp_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_3430sdp_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_3430sdp_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1727 +1,178 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc9-omap1
-# Tue Sep 15 16:48:34 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_3430SDP=y
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_OMAP_STI is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_LCD_VGA is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
 CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
 CONFIG_PANEL_GENERIC=y
 CONFIG_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_OMAP_DEBUG is not set
-# CONFIG_LEDS_OMAP is not set
-# CONFIG_LEDS_OMAP_PWM is not set
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_3630sdp_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_3630sdp_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_3630sdp_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_3630sdp_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1610 +1,154 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Thu Nov 12 12:21:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
 CONFIG_MACH_OMAP_3630SDP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
 CONFIG_USB_AUDIO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap3_beagle_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap3_beagle_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap3_beagle_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap3_beagle_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1388 +1,134 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Wed Oct  1 17:14:22 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP3_BEAGLE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap3_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap3_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap3_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap3_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,283 +1,41 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc5
-# Tue Jan 26 11:05:31 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV6=y
-CONFIG_OPROFILE_ARM11_CORE=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_ARCH_OMAP2=y
 CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_DEVICES=y
-CONFIG_OMAP_DEBUG_LEDS=y
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP Core Type
-#
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
+CONFIG_ARCH_OMAP2430=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-CONFIG_OMAP_PACKAGE_CUS=y
-CONFIG_OMAP_PACKAGE_CBP=y
-
-#
-# OMAP Board Type
-#
-CONFIG_MACH_OMAP2_TUSB6010=y
 CONFIG_MACH_OMAP_H4=y
 CONFIG_MACH_OMAP_APOLLON=y
-# CONFIG_MACH_OMAP_2430SDP is not set
+CONFIG_MACH_OMAP_2430SDP=y
 CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_DEVKIT8000=y
 CONFIG_MACH_OMAP_LDP=y
 CONFIG_MACH_OVERO=y
 CONFIG_MACH_OMAP3EVM=y
@@ -285,269 +43,50 @@
 CONFIG_MACH_OMAP3_PANDORA=y
 CONFIG_MACH_OMAP3_TOUCHBOOK=y
 CONFIG_MACH_OMAP_3430SDP=y
-CONFIG_MACH_NOKIA_N800=y
-CONFIG_MACH_NOKIA_N810=y
-CONFIG_MACH_NOKIA_N810_WIMAX=y
 CONFIG_MACH_NOKIA_N8X0=y
 CONFIG_MACH_NOKIA_RX51=y
 CONFIG_MACH_OMAP_ZOOM2=y
 CONFIG_MACH_OMAP_ZOOM3=y
 CONFIG_MACH_CM_T35=y
 CONFIG_MACH_IGEP0020=y
+CONFIG_MACH_SBC3530=y
 CONFIG_MACH_OMAP_3630SDP=y
 CONFIG_MACH_OMAP_4430SDP=y
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_411920 is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_GIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_SMP is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyS2,115200"
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -557,1668 +96,197 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIBCM203X=y
 CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEBUGFS is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
 CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_MINSTREL=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
 CONFIG_MTD_OOPS=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_EEPROM_LEGACY=y
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_BLK_DEV_DM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_USB=y
 CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
 CONFIG_LIBERTAS_DEBUG=y
-# CONFIG_P54_COMMON is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_OMAP is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MENELAUS is not set
+CONFIG_MENELAUS=y
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
+CONFIG_TWL4030_POWER=y
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR_TPS65023=y
+CONFIG_REGULATOR_TPS6507X=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCD_VGA=y
-# CONFIG_FB_OMAP_031M3R is not set
-# CONFIG_FB_OMAP_048M3R is not set
-CONFIG_FB_OMAP_079M3R=y
-# CONFIG_FB_OMAP_092M9R is not set
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_OMAP2_DSS is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
-# CONFIG_SND_OMAP_SOC_N810 is not set
-# CONFIG_SND_OMAP_SOC_OVERO is not set
-# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set
-# CONFIG_SND_OMAP_SOC_AM3517EVM is not set
-# CONFIG_SND_OMAP_SOC_SDP3430 is not set
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-# CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE is not set
-# CONFIG_SND_OMAP_SOC_ZOOM2 is not set
-# CONFIG_SND_OMAP_SOC_IGEP0020 is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
 CONFIG_USB_WDM=y
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
-CONFIG_TWL4030_USB=y
-CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL92330=y
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
 CONFIG_LOCK_STAT=y
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_TOMOYO is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap3_evm_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap3_evm_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap3_evm_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap3_evm_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1536 +1,160 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Mon May 18 14:01:52 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_SMARTREFLEX=y
-# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
 CONFIG_MACH_OMAP3EVM=y
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_FB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=4
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+CONFIG_PANEL_GENERIC=y
+CONFIG_PANEL_SHARP_LS037V7DW01=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=y
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TWL4030_USB is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap3_pandora_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap3_pandora_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap3_pandora_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap3_pandora_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1796 +1,158 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Sat Feb  6 20:25:41 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-
-#
-# Kernel Performance Events And Counters
-#
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_COUNTERS is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_NUC93X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-CONFIG_ARCH_OMAP2PLUS=y
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP3430=y
-CONFIG_OMAP_PACKAGE_CBB=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
 CONFIG_MACH_OMAP3_PANDORA=y
-# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_CPU_HAS_PMU=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
 CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_XILINX is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_ALS is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
 CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_CODEC=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_OMAP2_VRAM=y
-CONFIG_OMAP2_VRFB=y
 CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=0
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
-# CONFIG_OMAP2_DSS_RFBI is not set
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP2_DSS_DSI is not set
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
-
-#
-# OMAP2/3 Display Device Drivers
-#
-# CONFIG_PANEL_GENERIC is not set
-# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
-# CONFIG_PANEL_TOPPOLY_TDO35S is not set
 CONFIG_PANEL_TPO_TD043MTEA1=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_3M_PCT is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_QUANTA is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_STANTUM is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
 CONFIG_USB_MUSB_PERIPHERAL=y
-# CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_GADGET_MUSB_HDRC=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_USB_ULPI is not set
+CONFIG_USB_ETH=m
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_FANOTIFY=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_LOGFS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=y
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
 CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
-# CONFIG_SHM_SIGNAL is not set
-# CONFIG_IOQ is not set
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap3_stalker_lks_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap3_stalker_lks_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap3_stalker_lks_defconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap3_stalker_lks_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,150 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MCBSP is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_ARCH_OMAP3430=y
+CONFIG_MACH_SBC3530=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+CONFIG_FPE_NWFPE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_OMAP2=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
+CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
+CONFIG_GPIO_TWL4030=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_CORE=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_MON=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_TEST=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ZERO=m
+CONFIG_TWL4030_USB=y
+CONFIG_MMC=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_INOTIFY=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V2=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_LL=y
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_CCITT=y
+CONFIG_LIBCRC32C=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap3_touchbook_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap3_touchbook_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap3_touchbook_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap3_touchbook_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,475 +1,91 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Fri Dec  4 16:02:17 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP3_TOUCHBOOK=y
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_IGEP0020 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
 CONFIG_TCP_CONG_HSTCP=m
 CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
 CONFIG_TCP_CONG_SCALABLE=m
 CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
 CONFIG_IPV6_MROUTE=y
-# CONFIG_IPV6_PIMSM_V2 is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
@@ -481,33 +97,21 @@
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -516,38 +120,24 @@
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
 CONFIG_IP_VS=m
 CONFIG_IP_VS_IPV6=y
 CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
 CONFIG_IP_VS_PROTO_TCP=y
 CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_AH_ESP=y
 CONFIG_IP_VS_PROTO_ESP=y
 CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -558,18 +148,8 @@
 CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
 CONFIG_IP_VS_FTP=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -581,22 +161,10 @@
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -605,10 +173,6 @@
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -626,62 +190,19 @@
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_BRIDGE_NF_EBTABLES is not set
 CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=y
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=y
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_RDS is not set
 CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
 CONFIG_ATM=m
 CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
-CONFIG_GARP=m
 CONFIG_BRIDGE=m
-# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -696,15 +217,9 @@
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_DRR=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 CONFIG_CLS_U32_PERF=y
@@ -712,20 +227,7 @@
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_FLOW=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -735,10 +237,6 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
 CONFIG_BT_HCIBTUSB=y
 CONFIG_BT_HCIBTSDIO=y
 CONFIG_BT_HCIUART=y
@@ -748,230 +246,38 @@
 CONFIG_BT_HCIBCM203X=y
 CONFIG_BT_HCIBPA10X=y
 CONFIG_BT_HCIBFUSB=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
 CONFIG_AF_RXRPC=m
-# CONFIG_AF_RXRPC_DEBUG is not set
-# CONFIG_RXKAD is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_WIMAX=m
-CONFIG_WIMAX_DEBUG_LEVEL=8
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_PREFETCH=y
-# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
 CONFIG_EEPROM_93CX6=y
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -979,22 +285,15 @@
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID6_PQ=m
-# CONFIG_ASYNC_RAID6_TEST is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
-# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_QL is not set
-# CONFIG_DM_MULTIPATH_ST is not set
 CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -1002,44 +301,8 @@
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
 CONFIG_VETH=m
-# CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
-
-#
-# WiMAX Wireless Broadband devices
-#
-# CONFIG_WIMAX_I2400M_USB is not set
-# CONFIG_WIMAX_I2400M_SDIO is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 # CONFIG_ATM_DRIVERS is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
@@ -1050,620 +313,81 @@
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOATM is not set
-CONFIG_PPPOL2TP=m
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=y
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TWL4030 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
 CONFIG_BATTERY_BQ27x00=y
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
 CONFIG_THERMAL=y
 CONFIG_THERMAL_HWMON=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_TWL4030_CODEC is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_OMAP is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_HRTIMER=m
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_RAWMIDI_SEQ=m
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
 # CONFIG_SND_ARM is not set
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_OXU210HP_HCD=y
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
 CONFIG_USB_TMC=m
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
 CONFIG_USB_SERIAL_ARK3116=m
@@ -1671,7 +395,6 @@
 CONFIG_USB_SERIAL_CH341=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP210X is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1707,14 +430,11 @@
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_OTI6858=m
-# CONFIG_USB_SERIAL_QUALCOMM is not set
 CONFIG_USB_SERIAL_SPCP8X5=m
 CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
 CONFIG_USB_SERIAL_SIEMENS_MPI=m
 CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-# CONFIG_USB_SERIAL_SYMBOL is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
@@ -1722,441 +442,95 @@
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_SERIAL_OPTICON=m
 CONFIG_USB_SERIAL_DEBUG=m
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
 CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_SISUSBVGA_CON=y
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_ATM is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ZERO_HNPTEST=y
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
 CONFIG_USB_G_PRINTER=m
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
 CONFIG_USB_GPIO_VBUS=y
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=m
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=m
 CONFIG_UIO_PDRV=m
 CONFIG_UIO_PDRV_GENIRQ=m
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-
-#
-# TI VLYNQ
-#
 CONFIG_STAGING=y
 # CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_W35UND is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_OTUS is not set
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_INPUT_MIMIO is not set
-# CONFIG_TRANZPORT is not set
-
-#
-# Android
-#
-
-#
-# Qualcomm MSM Camera And Video
-#
-
-#
-# Camera Sensor Selection
-#
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_DST is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_PLAN9AUTH is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_FB_UDL is not set
-
-#
-# RAR Register Driver
-#
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_IIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
 CONFIG_REISERFS_PROC_INFO=y
 CONFIG_REISERFS_FS_XATTR=y
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
 CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
 CONFIG_NTFS_RW=y
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-# CONFIG_JFFS2_CMODE_PRIORITY is not set
-# CONFIG_JFFS2_CMODE_SIZE is not set
 CONFIG_JFFS2_CMODE_FAVOURLZO=y
 CONFIG_UBIFS_FS=y
 CONFIG_UBIFS_FS_XATTR=y
 CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_STATS2=y
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_UPCALL is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_DFS_UPCALL is not set
 CONFIG_CIFS_EXPERIMENTAL=y
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
 CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -2195,183 +569,37 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_ASYNC_PQ=m
-CONFIG_ASYNC_RAID6_RECOV=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
 CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_WORKQUEUE=y
 CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_SEQIV=m
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CTR=m
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_XTS=m
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=y
@@ -2379,7 +607,6 @@
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -2387,44 +614,8 @@
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
-CONFIG_CRYPTO_ANSI_CPRNG=m
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_4430sdp_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_4430sdp_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_4430sdp_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_4430sdp_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,891 +1,122 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Sun Dec  6 23:37:45 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
 CONFIG_ARCH_OMAP4=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_NONE is not set
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_4430SDP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
 CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_GIC=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_NR_CPUS=2
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_LOCAL_TIMERS is not set
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS2,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_KS8851=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_OMAP=y
+CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_OMAP_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_TWL4030_CORE=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
+CONFIG_MMC=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_TWL4030=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
 CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_BRANCH_PROFILE_NONE is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_apollon_2420_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_apollon_2420_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_apollon_2420_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_apollon_2420_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,961 +1,92 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 12:07:29 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
 # CONFIG_OMAP_MCBSP is not set
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
 CONFIG_MACH_OMAP_APOLLON=y
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OMAP2 is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_OMAP_WATCHDOG=y
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
 # CONFIG_HID is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_generic_1510_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_generic_1510_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_generic_1510_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_generic_1510_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1171 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 12:20:19 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
-# CONFIG_USB_ALI_M5632 is not set
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_generic_1610_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_generic_1610_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_generic_1610_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_generic_1610_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1177 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 13:01:27 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_generic_1710_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_generic_1710_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_generic_1710_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_generic_1710_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1087 +1,75 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 13:02:08 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
 # CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
 CONFIG_ARTHUR=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-CONFIG_USB_NET_CDC_SUBSET=y
 CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AN2720 is not set
 # CONFIG_USB_BELKIN is not set
 # CONFIG_USB_ARMLINUX is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
 CONFIG_NLS_CODEPAGE_852=y
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_SECURITY_LOWMEM is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_generic_2420_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_generic_2420_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_generic_2420_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_generic_2420_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,654 +1,37 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:44:48 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
 # CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_DSP is not set
 CONFIG_MACH_OMAP_GENERIC=y
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
-# CONFIG_MACH_OMAP_H4 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
-# CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_ROMFS_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_h2_1610_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_h2_1610_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_h2_1610_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_h2_1610_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1339 +1,109 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2-omap1
-# Wed Feb 20 17:12:36 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
 CONFIG_MACH_OMAP_H2=y
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
-# CONFIG_OMAP_ARM_192MHZ is not set
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
-CONFIG_OMAP_ARM_60MHZ=y
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
 CONFIG_DEBUG_DRIVER=y
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=y
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=y
-# CONFIG_SLIP_SMART is not set
-# CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 CONFIG_INPUT_UINPUT=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-CONFIG_ISP1301_OMAP=y
-CONFIG_TPS65010=y
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-CONFIG_SPI_TSC2101=y
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_TSC210X is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
 CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_TEST=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-# CONFIG_OMAP_DSP is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_h4_2420_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_h4_2420_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_h4_2420_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_h4_2420_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1119 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:44:58 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
 CONFIG_ARCH_OMAP2=y
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_DEVICES=y
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP Core Type
-#
-CONFIG_ARCH_OMAP24XX=y
 CONFIG_ARCH_OMAP2420=y
-# CONFIG_ARCH_OMAP2430 is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_N800 is not set
 CONFIG_MACH_OMAP_H4=y
-# CONFIG_MACH_OMAP_H4_TUSB is not set
-# CONFIG_MACH_OMAP_H4_OTG is not set
-# CONFIG_MACH_OMAP2_H4_USB1 is not set
-# CONFIG_MACH_OMAP_APOLLON is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-# CONFIG_MACH_OMAP_2430SDP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=y
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=y
 CONFIG_IRCOMM=y
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-CONFIG_OMAP_IR=y
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
+CONFIG_I2C=y
+CONFIG_I2C_OMAP=y
+# CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-CONFIG_GPIOEXPANDER_OMAP=y
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_MENELAUS=y
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_innovator_1510_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_innovator_1510_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_innovator_1510_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_innovator_1510_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1252 +1,102 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:02 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_INNOVATOR=y
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET_MII=y
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=y
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=y
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=y
 CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-CONFIG_OMAP_PS2=m
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OMAP is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_innovator_1610_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_innovator_1610_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_innovator_1610_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_innovator_1610_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,838 +1,58 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:05 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_INNOVATOR=y
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
-# CONFIG_MACH_OMAP_OSK is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_ldp_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_ldp_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_ldp_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_ldp_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1259 +1,135 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 10 11:49:41 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
 CONFIG_MACH_OMAP_LDP=y
-# CONFIG_MACH_OVERO is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_FB_OMAP=y
 CONFIG_FB_OMAP_LCD_VGA=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
 CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
 CONFIG_LCD_PLATFORM=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
 # CONFIG_BACKLIGHT_GENERIC is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SND=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_osk_5912_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_osk_5912_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_osk_5912_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_osk_5912_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1090 +1,87 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3-omap1
-# Fri Nov 23 12:24:12 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_STI is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
-# CONFIG_OMAP_DM_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
 # CONFIG_ARCH_OMAP15XX is not set
 CONFIG_ARCH_OMAP16XX=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
 CONFIG_MACH_OMAP_OSK=y
-# CONFIG_OMAP_OSK_MISTRAL is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_216MHZ is not set
 CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_OMAP_CF=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-CONFIG_HW_RANDOM_OMAP=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-CONFIG_TPS65010=y
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_GPIOEXPANDER_OMAP is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_perseus2_730_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_perseus2_730_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_perseus2_730_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_perseus2_730_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,927 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc6-omap1
-# Tue Sep 18 11:45:12 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP3 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-
-#
-# OMAP Core Type
-#
 CONFIG_ARCH_OMAP730=y
 # CONFIG_ARCH_OMAP15XX is not set
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
 CONFIG_MACH_OMAP_PERSEUS2=y
-# CONFIG_MACH_OMAP_FSAMPLE is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
-# CONFIG_OMAP_ARM_195MHZ is not set
 CONFIG_OMAP_ARM_182MHZ=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_OMAP_NOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_OMAP=y
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_OMAP is not set
 CONFIG_FB_VIRTUAL=y
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_zoom2_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_zoom2_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_zoom2_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_zoom2_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,663 +1,69 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-omap1
-# Fri Jun 12 17:25:46 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_ZOOM2=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_OMAP_STI is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
@@ -667,879 +73,71 @@
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL4030_POWEROFF is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-CONFIG_USB_ZERO=y
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_USB_ZERO=m
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_TWL4030 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/omap_zoom3_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/omap_zoom3_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/omap_zoom3_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/omap_zoom3_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,682 +1,69 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Thu Nov 12 13:04:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-# CONFIG_ARCH_OMAP4 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MBOX_FWK is not set
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_LL_DEBUG_NONE=y
-# CONFIG_OMAP_PM_NONE is not set
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
 CONFIG_MACH_OMAP_ZOOM3=y
-# CONFIG_MACH_OMAP_3630SDP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_NEON is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_VERBOSE=y
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-# CONFIG_PM_TEST_SUSPEND is not set
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
@@ -686,925 +73,83 @@
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
 CONFIG_W1=y
-CONFIG_W1_CON=y
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
-# CONFIG_TWL4030_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_TWL4030_POWER is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_DEBUG=y
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
 CONFIG_USB_AUDIO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
 CONFIG_USB_CDC_COMPOSITE=m
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=y
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/onearm_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/onearm_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/onearm_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/onearm_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1133 +1,80 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:18 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-
-#
-# AT91RM9200 Board Type
-#
 CONFIG_MACH_ONEARM=y
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_AT91_CF=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 # CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_AT91 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
+# CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_TIFM_SD is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/orion5x_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/orion5x_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/orion5x_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/orion5x_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,225 +1,16 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Thu Feb  4 23:30:00 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
 CONFIG_ARCH_ORION5X=y
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Orion Implementations
-#
 CONFIG_MACH_DB88F5281=y
 CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_KUROBOX_PRO=y
@@ -242,1631 +33,147 @@
 CONFIG_MACH_RD88F5181L_GE=y
 CONFIG_MACH_RD88F5181L_FXO=y
 CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_PLAT_ORION=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_FEROCEON=y
-CONFIG_CPU_FEROCEON_OLD_ID=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-
-#
-# Bus support
-#
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
 CONFIG_NET_DSA=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_MV88E6XXX=y
-# CONFIG_NET_DSA_MV88E6060 is not set
-CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
 CONFIG_NET_DSA_MV88E6131=y
 CONFIG_NET_DSA_MV88E6123_61_65=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_CB710_CORE is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_PMCRAID is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SIL24 is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# You can enable one or both FireWire driver stacks.
-#
-
-#
-# The newer stack is recommended.
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
 CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1C is not set
-# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_ATMEL is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
 CONFIG_HW_RANDOM_TIMERIOMEM=m
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_LANGWELL is not set
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
 # CONFIG_VGA_ARB is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=y
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
-# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_S35390A=y
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_MV_XOR=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_XATTR=y
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_JBD2=m
-# CONFIG_JBD2_DEBUG is not set
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_2=y
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_DEV_MV_CESA=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/overo_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/overo_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/overo_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/overo_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,426 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8
-# Fri Oct  3 11:50:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
 # CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
 CONFIG_MACH_OVERO=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=" debug "
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=y
 CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
@@ -430,209 +61,34 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=y
 CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=y
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_93CX6=m
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
+CONFIG_EEPROM_LEGACY=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -640,64 +96,36 @@
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
+CONFIG_USB_ZD1201=m
+CONFIG_RTL8187=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_USB=y
 CONFIG_LIBERTAS_SDIO=y
 CONFIG_LIBERTAS_DEBUG=y
-CONFIG_USB_ZD1201=m
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-CONFIG_RTL8187=m
-# CONFIG_MAC80211_HWSIM is not set
 CONFIG_P54_COMMON=m
 CONFIG_P54_USB=m
-# CONFIG_IWLWIFI_LEDS is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
 CONFIG_USB_NET_DM9601=m
 CONFIG_USB_NET_GL620A=m
 CONFIG_USB_NET_NET1080=m
@@ -707,1178 +135,141 @@
 CONFIG_USB_NET_CDC_SUBSET=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
 CONFIG_USB_NET_ZAURUS=m
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=m
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_CX25840=m
-CONFIG_VIDEO_CX2341X=m
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_AU0828 is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_GSPCA is not set
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-# CONFIG_USB_ET61X251 is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_ZR364XX=m
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-# CONFIG_DVB_USB_DW2102 is not set
-# CONFIG_DVB_USB_ANYSEE is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_CINERGYT2=m
-# CONFIG_DVB_CINERGYT2_TUNING is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-# CONFIG_DVB_DRX397XD is not set
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6405 is not set
-CONFIG_DVB_ISL6421=m
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=y
 CONFIG_SND_USB_CAIAQ=m
 CONFIG_SND_USB_CAIAQ_INPUT=y
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
 CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
 CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/palmte_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/palmte_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/palmte_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/palmte_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,760 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Sat May 19 11:04:27 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
 CONFIG_MACH_OMAP_PALMTE=y
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-CONFIG_OMAP_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=y
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/palmtt_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/palmtt_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/palmtt_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/palmtt_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,843 +1,56 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc3-omap1
-# Sun Oct 29 00:36:12 2006
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-CONFIG_OMAP_LL_DEBUG_UART2=y
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-CONFIG_OMAP_DSP_FBEXPORT=y
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
 CONFIG_MACH_OMAP_PALMTT=y
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=320
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TSC2102 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_OMAP_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_TSC2102 is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_OMAP=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_OMAP=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-CONFIG_BACKLIGHT_OMAP=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
 CONFIG_RTC_DRV_OMAP=y
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# Synchronous Serial Interfaces (SSI)
-#
-# CONFIG_OMAP_UWIRE is not set
-# CONFIG_OMAP_TSC2101 is not set
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/palmz71_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/palmz71_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/palmz71_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/palmz71_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,890 +1,53 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun  7 05:13:00 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-z71"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_BOOT_TAG is not set
-# CONFIG_OMAP_GPIO_SWITCH is not set
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
-# CONFIG_OMAP_MBOX_FWK is not set
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-CONFIG_OMAP_LL_DEBUG_UART1=y
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-# CONFIG_OMAP_DSP is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
 CONFIG_MACH_OMAP_PALMZ71=y
-# CONFIG_MACH_OMAP_PALMTT is not set
-# CONFIG_MACH_SX1 is not set
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
 CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_168MHZ is not set
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
-# CONFIG_NETDEVICES is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=320
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_TSC210X is not set
-# CONFIG_TOUCHSCREEN_TSC2046 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_OMAP_UWIRE=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TSC2101 is not set
-# CONFIG_SPI_TSC2102 is not set
-# CONFIG_SPI_TSC210X is not set
-# CONFIG_SPI_TSC2301 is not set
-# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_TSC210X is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_OMAP=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
-# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/palmz72_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/palmz72_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/palmz72_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/palmz72_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,950 +1,85 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Sun Aug 24 02:29:27 2008
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
 CONFIG_ARCH_PXA_PALM=y
 # CONFIG_MACH_PALMTX is not set
-CONFIG_MACH_PALMZ72=y
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_PWM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=tty root=/dev/mmcblk0"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_PXA27x=y
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_PXA is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=866
 CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
 CONFIG_NLS_CODEPAGE_866=y
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/pcm027_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/pcm027_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/pcm027_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/pcm027_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1095 +1,102 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Dec 21 10:52:09 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_PCM027=y
 CONFIG_MACH_PCM990_BASEBOARD=y
-CONFIG_PXA27x=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_PXA2XX is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
 CONFIG_SND_PXA2XX_AC97=y
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_PCF8563=m
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=m
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-CONFIG_FS_MBCACHE=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=850
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-15"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/picotux200_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/picotux200_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/picotux200_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/picotux200_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,355 +1,51 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Wed Mar 28 16:19:50 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
-# CONFIG_ARCH_AT91RM9200DK is not set
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
 CONFIG_MACH_PICOTUX2XX=y
-# CONFIG_MACH_KAFA is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=m
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_MIP6=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -359,429 +55,70 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=m
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=m
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_GPIO=m
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=m
-CONFIG_SENSORS_DS1374=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_SENSORS_PCA9539=m
-CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 CONFIG_HWMON=m
-CONFIG_HWMON_VID=m
-# CONFIG_SENSORS_ABITUGURU is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
 CONFIG_SENSORS_ADM1026=m
 CONFIG_SENSORS_ADM1029=m
 CONFIG_SENSORS_ADM1031=m
 CONFIG_SENSORS_ADM9240=m
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
 CONFIG_SENSORS_DS1621=m
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
 CONFIG_SENSORS_GL518SM=m
 CONFIG_SENSORS_GL520SM=m
 CONFIG_SENSORS_IT87=m
@@ -796,440 +133,49 @@
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_LM92=m
 CONFIG_SENSORS_MAX1619=m
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
+CONFIG_SENSORS_PCF8591=m
 CONFIG_SENSORS_SMSC47B397=m
-# CONFIG_SENSORS_VT1211 is not set
 CONFIG_SENSORS_W83781D=m
 CONFIG_SENSORS_W83791D=m
 CONFIG_SENSORS_W83792D=m
 CONFIG_SENSORS_W83793=m
 CONFIG_SENSORS_W83L785TS=m
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=m
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET_MII=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=m
 CONFIG_MMC_AT91=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_AT91RM9200=m
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
 CONFIG_AMIGA_PARTITION=y
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="utf-8"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1269,115 +215,28 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/pleb_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/pleb_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/pleb_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/pleb_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,745 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:03:02 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_HOTPLUG is not set
 # CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
 CONFIG_SA1100_PLEB=y
-# CONFIG_SA1100_SHANNON is not set
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_SA1100=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
 CONFIG_SMC91X=y
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
 # CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
 # CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_DEBUG_KERNEL=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/pnx4008_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/pnx4008_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/pnx4008_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/pnx4008_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,272 +1,55 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Mon Sep 11 13:59:24 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
 CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PNX4008=y
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
 CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
 CONFIG_IP_VS_PROTO_TCP=y
 CONFIG_IP_VS_PROTO_UDP=y
 CONFIG_IP_VS_PROTO_ESP=y
 CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
 CONFIG_IP_VS_RR=m
 CONFIG_IP_VS_WRR=m
 CONFIG_IP_VS_LC=m
@@ -277,64 +60,10 @@
 CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
 CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-# CONFIG_IPV6_ROUTER_PREF is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
 CONFIG_IP6_NF_QUEUE=m
-
-#
-# DECnet: Netfilter Configuration
-#
 CONFIG_DECNET_NF_GRABULATOR=m
-
-#
-# Bridge: Netfilter Configuration
-#
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -354,42 +83,17 @@
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
-# CONFIG_BRIDGE_EBT_ULOG is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 CONFIG_ATM=y
 CONFIG_ATM_CLIP=y
-# CONFIG_ATM_CLIP_NO_ICMP is not set
 CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_DECNET=m
-# CONFIG_DECNET_ROUTER is not set
-CONFIG_LLC=m
 CONFIG_LLC2=m
 CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
@@ -397,23 +101,11 @@
 CONFIG_IPDDP_DECAP=y
 CONFIG_X25=m
 CONFIG_LAPB=m
-# CONFIG_NET_DIVERT is not set
 CONFIG_ECONET=m
 CONFIG_ECONET_AUNUDP=y
 CONFIG_ECONET_NATIVE=y
 CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -426,303 +118,71 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
 CONFIG_NET_PKTGEN=m
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
 CONFIG_MTD_SLRAM=m
 CONFIG_MTD_PHRAM=m
 CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
 CONFIG_MTD_DOC2000=m
 CONFIG_MTD_DOC2001=m
 CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_NANDSIM=m
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
 CONFIG_SCSI_SPI_ATTRS=m
 CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-CONFIG_SCSI_SATA=m
 CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-CONFIG_STRIP=m
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-
-#
-# Wan interfaces
-#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+# CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_WAN=y
 CONFIG_HDLC=m
-CONFIG_HDLC_RAW=y
-CONFIG_HDLC_RAW_ETH=y
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_HDLC_X25=y
+CONFIG_HDLC_RAW=m
+CONFIG_HDLC_RAW_ETH=m
+CONFIG_HDLC_CISCO=m
+CONFIG_HDLC_FR=m
+CONFIG_HDLC_PPP=m
+CONFIG_HDLC_X25=m
 CONFIG_DLCI=m
-CONFIG_DLCI_COUNT=24
-CONFIG_DLCI_MAX=8
-CONFIG_WAN_ROUTER_DRIVERS=y
+CONFIG_WAN_ROUTER_DRIVERS=m
 CONFIG_LAPBETHER=m
 CONFIG_X25_ASY=m
-
-#
-# ATM drivers
-#
-# CONFIG_ATM_DUMMY is not set
 CONFIG_ATM_TCP=m
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
@@ -738,44 +198,15 @@
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_SUNKBD=m
 CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
 CONFIG_KEYBOARD_NEWTON=m
-CONFIG_INPUT_MOUSE=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_XTKBD=m
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_VSXXXAA=m
@@ -799,736 +230,187 @@
 CONFIG_JOYSTICK_SPACEORB=m
 CONFIG_JOYSTICK_SPACEBALL=m
 CONFIG_JOYSTICK_STINGER=m
-# CONFIG_JOYSTICK_TWIDJOY is not set
 CONFIG_JOYSTICK_JOYDUMP=m
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
 CONFIG_TOUCHSCREEN_GUNZE=m
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
-CONFIG_GAMEPORT=m
 CONFIG_GAMEPORT_NS558=m
 CONFIG_GAMEPORT_L4=m
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_BITBANG=y
-
-#
-# SPI Protocol Masters
-#
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-CONFIG_DVB=y
-CONFIG_DVB_CORE=m
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_CINERGYT2=m
-CONFIG_DVB_CINERGYT2_TUNING=y
-CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
-CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
-CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
-CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
-CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_CX24110=m
-# CONFIG_DVB_CX24123 is not set
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_VES1X93=m
-# CONFIG_DVB_S5H1420 is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-# CONFIG_DVB_ZL10353 is not set
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-
-#
-# Miscellaneous devices
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_USBPCWATCHDOG=m
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
 CONFIG_SND_USB_AUDIO=m
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_HID=m
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_BANDWIDTH=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_SL811_HCD=m
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-
-#
-# USB HID Boot Protocol drivers
-#
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-# CONFIG_USB_ACECAD is not set
-CONFIG_USB_KBTAB=m
-CONFIG_USB_POWERMATE=m
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-CONFIG_USB_XPAD=m
-CONFIG_USB_ATI_REMOTE=m
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
 CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
-# CONFIG_USB_SERIAL_GARMIN is not set
 CONFIG_USB_SERIAL_IPW=m
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-CONFIG_USB_AUERSWALD=m
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETSERVO=m
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
 CONFIG_USB_TEST=m
-
-#
-# USB DSL modem support
-#
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_XUSBATM is not set
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
 CONFIG_JFS_STATISTICS=y
-CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=m
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-CONFIG_JFFS_PROC_FS=y
 CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
 CONFIG_NCP_FS=m
 CONFIG_NCPFS_PACKET_SIGNING=y
 CONFIG_NCPFS_IOCTL_LOCKING=y
 CONFIG_NCPFS_STRONG=y
 CONFIG_NCPFS_NFS_NS=y
 CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
 CONFIG_NCPFS_NLS=y
 CONFIG_NCPFS_EXTRAS=y
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 CONFIG_AFS_FS=m
-CONFIG_RXRPC=m
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ACORN_PARTITION=y
-# CONFIG_ACORN_PARTITION_CUMANA is not set
-# CONFIG_ACORN_PARTITION_EESOX is not set
 CONFIG_ACORN_PARTITION_ICS=y
-# CONFIG_ACORN_PARTITION_ADFS is not set
-# CONFIG_ACORN_PARTITION_POWERTEC is not set
 CONFIG_ACORN_PARTITION_RISCIX=y
 CONFIG_OSF_PARTITION=y
 CONFIG_AMIGA_PARTITION=y
 CONFIG_ATARI_PARTITION=y
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
 CONFIG_MINIX_SUBPARTITION=y
 CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
 CONFIG_SGI_PARTITION=y
 CONFIG_ULTRIX_PARTITION=y
 CONFIG_SUN_PARTITION=y
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -1567,96 +449,24 @@
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-CONFIG_SECURITY_ROOTPLUG=m
-CONFIG_SECURITY_SECLVL=m
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_PLIST=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/pxa168_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/pxa168_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/pxa168_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/pxa168_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,973 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Tue Jan 12 08:57:10 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
 CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_MACH_TAVOREVB is not set
-
-#
-# Marvell PXA168/910 Implmentations
-#
 CONFIG_MACH_ASPENITE=y
 CONFIG_MACH_ZYLONITE2=y
 CONFIG_MACH_AVENGERS_LITE=y
-# CONFIG_MACH_TTC_DKB is not set
-CONFIG_CPU_PXA168=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_MOHAWK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_HOSTAP is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/pxa255-idp_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/pxa255-idp_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/pxa255-idp_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/pxa255-idp_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,796 +1,59 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:20:17 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
 CONFIG_ARCH_PXA_IDP=y
-# CONFIG_PXA_SHARPSL is not set
-CONFIG_PXA25x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
 # CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_SHARP_SL is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/pxa3xx_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/pxa3xx_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/pxa3xx_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/pxa3xx_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1331 +1,134 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Mon Jul 13 22:48:49 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_CLASSIC_RCU is not set
-CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-CONFIG_CPU_PXA930=y
-CONFIG_CPU_PXA935=y
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-CONFIG_MACH_ZYLONITE=y
 CONFIG_MACH_LITTLETON=y
 CONFIG_MACH_TAVOREVB=y
 CONFIG_MACH_SAAR=y
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_PXA27x=y
 CONFIG_KEYBOARD_PXA930_ROTARY=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
 CONFIG_MOUSE_PXA930_TRKBALL=y
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-CONFIG_TOUCHSCREEN_DA9034=y
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
 CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
 CONFIG_GPIO_MAX7301=y
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_SUPPLY_DEBUG=y
 CONFIG_PDA_POWER=y
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
 CONFIG_BATTERY_DA9030=y
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_DA903X=y
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
 CONFIG_LCD_TDO24M=y
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_DA903X=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
 CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_PCA955X is not set
 CONFIG_LEDS_DA903X=m
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_DA903X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/pxa910_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/pxa910_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/pxa910_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/pxa910_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,890 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Mar 20 13:45:12 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
 CONFIG_ARCH_MMP=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_MACH_TAVOREVB=y
-
-#
-# Marvell PXA168/910 Implmentations
-#
-# CONFIG_MACH_ASPENITE is not set
-# CONFIG_MACH_ZYLONITE2 is not set
 CONFIG_MACH_TTC_DKB=y
-CONFIG_CPU_PXA910=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_MOHAWK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/qil-a9260_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/qil-a9260_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/qil-a9260_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/qil-a9260_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1255 +1,115 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 12:28:38 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
-# CONFIG_MACH_USB_A9260 is not set
 CONFIG_MACH_QIL_A9260=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_AT91_EARLY_DBGU is not set
 CONFIG_AT91_EARLY_USART0=y
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_PCA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_AT91SAM9X_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-# CONFIG_MMC_SPI is not set
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_M41T94=y
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_AT91SAM9 is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/raumfeld_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/raumfeld_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/raumfeld_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/raumfeld_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1655 +1,164 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sun Nov  1 21:57:32 2009
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-CONFIG_SLOW_WORK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
-CONFIG_CPU_PXA320=y
-# CONFIG_CPU_PXA930 is not set
-# CONFIG_CPU_PXA935 is not set
-# CONFIG_CPU_PXA950 is not set
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
 CONFIG_MACH_RAUMFELD_RC=y
 CONFIG_MACH_RAUMFELD_CONNECTOR=y
-CONFIG_MACH_RAUMFELD_PROTO=y
 CONFIG_MACH_RAUMFELD_SPEAKER=y
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_XSC3L2=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="console=ttyS0,115200 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 CONFIG_CFG80211_REG_DEBUG=y
-CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
 CONFIG_NFTL=y
 CONFIG_NFTL_RW=y
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
 CONFIG_MTD_NAND_PXA3xx=y
-# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
 CONFIG_ISL29003=y
 CONFIG_TI_DAC7512=y
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=y
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
 CONFIG_USB_NET_MCS7830=y
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
 CONFIG_TOUCHSCREEN_EETI=m
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_UINPUT is not set
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
-# CONFIG_SPI_PXA2XX is not set
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=y
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-CONFIG_W1=m
-
-#
-# 1-wire Bus Masters
-#
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
 CONFIG_W1_MASTER_GPIO=m
-
-#
-# 1-wire Slaves
-#
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_W1_SLAVE_BQ27000 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
 CONFIG_PDA_POWER=y
-# CONFIG_APM_POWER is not set
 CONFIG_BATTERY_DS2760=m
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
 CONFIG_SENSORS_LIS3_SPI=y
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_MAX8660=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-CONFIG_PXA3XX_GCU=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_RAUMFELD_CLUT224=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_LIB=y
-# CONFIG_SND_PXA2XX_AC97 is not set
-CONFIG_SND_SPI=y
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_PXA_SOC_SSP=y
 CONFIG_SND_SOC_RAUMFELD=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AK4104=y
-CONFIG_SND_SOC_CS4270=y
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
 CONFIG_HID_DRAGONRISE=y
-# CONFIG_DRAGONRISE_FF is not set
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
 CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_GREENASIA=y
-# CONFIG_GREENASIA_FF is not set
 CONFIG_HID_SMARTJOYPLUS=y
-# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
 CONFIG_HID_THRUSTMASTER=y
-# CONFIG_THRUSTMASTER_FF is not set
 CONFIG_HID_ZEROPLUS=y
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
 CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_ISD200=y
 CONFIG_USB_STORAGE_USBAT=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=m
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_BD2802 is not set
 CONFIG_LEDS_LT3593=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
-# CONFIG_UIO_PDRV is not set
-# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_XIP=y
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
 CONFIG_FSCACHE=y
 CONFIG_FSCACHE_STATS=y
-# CONFIG_FSCACHE_HISTOGRAM is not set
-# CONFIG_FSCACHE_DEBUG is not set
 CONFIG_CACHEFILES=y
-# CONFIG_CACHEFILES_DEBUG is not set
-# CONFIG_CACHEFILES_HISTOGRAM is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFS_FSCACHE=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=y
 CONFIG_NLS_CODEPAGE_775=y
@@ -1688,211 +197,12 @@
 CONFIG_NLS_KOI8_R=y
 CONFIG_NLS_KOI8_U=y
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/realview_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/realview_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/realview_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/realview_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1090 +1,89 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Mon Nov 10 14:39:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
 CONFIG_ARCH_REALVIEW=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# RealView platform type
-#
 CONFIG_MACH_REALVIEW_EB=y
-# CONFIG_REALVIEW_EB_A9MP is not set
 CONFIG_REALVIEW_EB_ARM11MP=y
-# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
 CONFIG_MACH_REALVIEW_PB11MP=y
 CONFIG_MACH_REALVIEW_PB1176=y
-# CONFIG_MACH_REALVIEW_PBA8 is not set
-
-#
-# Processor Type
-#
-# CONFIG_CPU_ARM926T is not set
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-# CONFIG_CPU_V7 is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_GIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_SMP is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
 CONFIG_SND_ARMAACI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/realview-smp_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/realview-smp_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/realview-smp_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/realview-smp_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1095 +1,90 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Mon Nov 10 14:41:47 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
 CONFIG_ARCH_REALVIEW=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# RealView platform type
-#
 CONFIG_MACH_REALVIEW_EB=y
-# CONFIG_REALVIEW_EB_A9MP is not set
 CONFIG_REALVIEW_EB_ARM11MP=y
-# CONFIG_REALVIEW_EB_ARM11MP_REVB is not set
 CONFIG_MACH_REALVIEW_PB11MP=y
-# CONFIG_MACH_REALVIEW_PB1176 is not set
-# CONFIG_MACH_REALVIEW_PBA8 is not set
-CONFIG_REALVIEW_HIGH_PHYS_OFFSET=y
-
-#
-# Processor Type
-#
-# CONFIG_CPU_ARM926T is not set
-CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
-# CONFIG_CPU_V7 is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_ARM_GIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_NR_CPUS=4
 CONFIG_HOTPLUG_CPU=y
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_WM8400 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARM=y
 CONFIG_SND_ARMAACI=y
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/rpc_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/rpc_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/rpc_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/rpc_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,910 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Mon Aug  6 16:47:24 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ZONE_DMA=y
-CONFIG_FIQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
 CONFIG_ARCH_RPC=y
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-CONFIG_ARCH_ACORN=y
-
-#
-# Processor Type
-#
 CONFIG_CPU_ARM610=y
 CONFIG_CPU_ARM710=y
 CONFIG_CPU_SA110=y
-CONFIG_CPU_32v3=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V3=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V3=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V3=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_TIMER_ACORN=y
-
-#
-# Bus support
-#
-CONFIG_ISA_DMA_API=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_FD=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_SCSI_ARXESCSI=m
 CONFIG_SCSI_CUMANA_2=m
 CONFIG_SCSI_EESOXSCSI=m
 CONFIG_SCSI_POWERTECSCSI=y
-
-#
-# The following drivers are not fully supported
-#
 CONFIG_SCSI_CUMANA_1=m
 CONFIG_SCSI_OAK1=m
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_ICSIDE=y
-# CONFIG_MD is not set
+CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
 CONFIG_ARM_ETHER1=y
 CONFIG_ARM_ETHER3=y
 CONFIG_ARM_ETHERH=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_POCKET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
 CONFIG_MOUSE_RISCPC=y
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_RPCKBD=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=16
 CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-# CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_ACORN=y
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-CONFIG_I2C_ACORN=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_NEW_LEDS is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
 CONFIG_FB_ACORN=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
 CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_SOUND_OSS=m
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
-# CONFIG_SOUND_SB is not set
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
 CONFIG_SOUND_VIDC=m
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=y
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
 CONFIG_ADFS_FS=y
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-CONFIG_ACORN_PARTITION=y
 # CONFIG_ACORN_PARTITION_CUMANA is not set
 # CONFIG_ACORN_PARTITION_EESOX is not set
-CONFIG_ACORN_PARTITION_ICS=y
-CONFIG_ACORN_PARTITION_ADFS=y
-CONFIG_ACORN_PARTITION_POWERTEC=y
-CONFIG_ACORN_PARTITION_RISCIX=y
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -920,14 +116,8 @@
 CONFIG_NLS_CODEPAGE_865=m
 CONFIG_NLS_CODEPAGE_866=m
 CONFIG_NLS_CODEPAGE_869=m
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
 CONFIG_NLS_CODEPAGE_874=m
 CONFIG_NLS_ISO8859_8=m
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
@@ -937,79 +127,9 @@
 CONFIG_NLS_ISO8859_6=m
 CONFIG_NLS_ISO8859_7=m
 CONFIG_NLS_ISO8859_9=m
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
 CONFIG_NLS_KOI8_R=m
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/rx51_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/rx51_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/rx51_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/rx51_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,462 +1,57 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 15:28:56 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# TI OMAP Implementations
-#
-CONFIG_ARCH_OMAP_OTG=y
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
 CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP3_BEAGLE is not set
-# CONFIG_MACH_OMAP_LDP is not set
-# CONFIG_MACH_OVERO is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
 CONFIG_MACH_NOKIA_RX51=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=128
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Power management options
-#
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
-# CONFIG_PM_VERBOSE is not set
-CONFIG_CAN_PM_TRACE=y
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
 CONFIG_PM_RUNTIME=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
 CONFIG_PHONET=y
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -466,716 +61,80 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
 CONFIG_MTD_OOPS=y
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_OMAP_NOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
 CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_SIM is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
 CONFIG_SMC91X=m
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
 CONFIG_GPIO_TWL4030=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=m
 CONFIG_TWL4030_WATCHDOG=m
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_FB=y
+CONFIG_OMAP2_DSS=y
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+# CONFIG_OMAP2_DSS_DPI is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_FB_OMAP2=y
+CONFIG_PANEL_ACX565AKM=y
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
@@ -1185,645 +144,79 @@
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
-# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
-CONFIG_USB_OTG_WHITELIST=y
 CONFIG_USB_OTG_BLACKLIST_HUB=y
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
 CONFIG_USB_GADGET_DEBUG=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
-# CONFIG_USB_ZERO_HNPTEST is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_USB_G_NOKIA=m
-# CONFIG_USB_G_MULTI is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
 CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=m
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=m
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_PCA955X is not set
-
-#
-# LED Triggers
-#
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
 CONFIG_RTC_DRV_TWL4030=m
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_QUOTA_TREE=y
-# CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
 CONFIG_LOCK_STAT=y
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_LKDTM is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
 CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/s3c2410_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/s3c2410_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/s3c2410_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/s3c2410_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,489 +1,89 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=m
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_PLAT_S3C24XX=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_S3C24XX_DCLK=y
-CONFIG_CPU_S3C244X=y
-CONFIG_S3C24XX_PWM=y
-CONFIG_S3C24XX_GPIO_EXTRA=128
-CONFIG_S3C24XX_GPIO_EXTRA64=y
-CONFIG_S3C24XX_GPIO_EXTRA128=y
-CONFIG_PM_SIMTEC=y
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C_ADC=y
-CONFIG_MACH_SMDK=y
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2410=y
-CONFIG_CPU_LLSERIAL_S3C2440=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_WATCHDOG is not set
 CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
-# CONFIG_SAMSUNG_PM_DEBUG is not set
-# CONFIG_SAMSUNG_PM_CHECK is not set
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_DEV_HSMMC=y
-
-#
-# S3C2400 Machines
-#
-CONFIG_CPU_S3C2410=y
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_S3C2410_PM=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_SIMTEC_NOR=y
-CONFIG_MACH_BAST_IDE=y
-
-#
-# S3C2410 Machines
-#
+CONFIG_S3C_ADC=y
+CONFIG_S3C24XX_PWM=y
 CONFIG_ARCH_SMDK2410=y
 CONFIG_ARCH_H1940=y
-CONFIG_PM_H1940=y
 CONFIG_MACH_N30=y
 CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
 CONFIG_MACH_AML_M5900=y
-CONFIG_BAST_PC104_IRQ=y
 CONFIG_MACH_TCT_HAMMER=y
 CONFIG_MACH_VR1000=y
 CONFIG_MACH_QT2410=y
-CONFIG_CPU_S3C2412=y
-CONFIG_S3C2412_DMA=y
-CONFIG_S3C2412_PM=y
-
-#
-# S3C2412 Machines
-#
 CONFIG_MACH_JIVE=y
-# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set
-CONFIG_MACH_SMDK2413=y
-CONFIG_MACH_S3C2413=y
 CONFIG_MACH_SMDK2412=y
 CONFIG_MACH_VSTMS=y
-CONFIG_CPU_S3C2440=y
-CONFIG_S3C2440_DMA=y
-
-#
-# S3C2440 Machines
-#
+CONFIG_MACH_SMDK2416=y
 CONFIG_MACH_ANUBIS=y
+CONFIG_MACH_NEO1973_GTA02=y
 CONFIG_MACH_OSIRIS=y
+CONFIG_MACH_OSIRIS_DVS=m
 CONFIG_MACH_RX3715=y
 CONFIG_ARCH_S3C2440=y
 CONFIG_MACH_NEXCODER_2440=y
-CONFIG_SMDK2440_CPU2440=y
+CONFIG_SMDK2440_CPU2442=y
 CONFIG_MACH_AT2440EVB=y
-CONFIG_CPU_S3C2442=y
 CONFIG_MACH_MINI2440=y
-
-#
-# S3C2442 Machines
-#
-CONFIG_SMDK2440_CPU2442=y
-CONFIG_CPU_S3C2443=y
-CONFIG_S3C2443_DMA=y
-
-#
-# S3C2443 Machines
-#
+CONFIG_MACH_RX1950=y
 CONFIG_MACH_SMDK2443=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=m
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=m
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_TCP_CONG_WESTWOOD=m
-CONFIG_TCP_CONG_HTCP=m
 CONFIG_TCP_CONG_HSTCP=m
 CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_VEGAS=m
 CONFIG_TCP_CONG_SCALABLE=m
 CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-# CONFIG_DEFAULT_BIC is not set
-CONFIG_DEFAULT_CUBIC=y
-# CONFIG_DEFAULT_HTCP is not set
-# CONFIG_DEFAULT_VEGAS is not set
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
 CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
 CONFIG_NF_CONNTRACK_AMANDA=m
@@ -496,21 +96,13 @@
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-CONFIG_NETFILTER_XT_TARGET_RATEEST=m
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
 CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -522,7 +114,6 @@
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_HL=m
 CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
@@ -536,7 +127,6 @@
 CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_RECENT=m
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -545,42 +135,7 @@
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_IP_VS=m
-# CONFIG_IP_VS_IPV6 is not set
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-# CONFIG_IP_VS_PROTO_TCP is not set
-# CONFIG_IP_VS_PROTO_UDP is not set
-# CONFIG_IP_VS_PROTO_ESP is not set
-# CONFIG_IP_VS_PROTO_AH is not set
-
-#
-# IPVS scheduler
-#
-# CONFIG_IP_VS_RR is not set
-# CONFIG_IP_VS_WRR is not set
-# CONFIG_IP_VS_LC is not set
-# CONFIG_IP_VS_WLC is not set
-# CONFIG_IP_VS_LBLC is not set
-# CONFIG_IP_VS_LBLCR is not set
-# CONFIG_IP_VS_DH is not set
-# CONFIG_IP_VS_SH is not set
-# CONFIG_IP_VS_SED is not set
-# CONFIG_IP_VS_NQ is not set
-
-#
-# IPVS application helper
-#
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
@@ -592,22 +147,10 @@
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_DCCP=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_PROTO_UDPLITE=m
-CONFIG_NF_NAT_PROTO_SCTP=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -616,10 +159,6 @@
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -637,33 +176,6 @@
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -673,12 +185,6 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -687,385 +193,58 @@
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
 CONFIG_CFG80211=m
-# CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
 CONFIG_PARPORT_AX88796=m
 CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=m
 CONFIG_EEPROM_AT25=m
 CONFIG_EEPROM_LEGACY=m
 CONFIG_EEPROM_93CX6=m
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
 CONFIG_BLK_DEV_PLATFORM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
 CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
 CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-CONFIG_HAVE_PATA_PLATFORM=y
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
 CONFIG_MOUSE_APPLETOUCH=m
 CONFIG_MOUSE_BCM5974=m
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_JOYSTICK_ANALOG=m
 CONFIG_JOYSTICK_A3D=m
@@ -1079,9 +258,6 @@
 CONFIG_JOYSTICK_SIDEWINDER=m
 CONFIG_JOYSTICK_TMDC=m
 CONFIG_JOYSTICK_IFORCE=m
-# CONFIG_JOYSTICK_IFORCE_USB is not set
-# CONFIG_JOYSTICK_IFORCE_232 is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
 CONFIG_JOYSTICK_MAGELLAN=m
 CONFIG_JOYSTICK_SPACEORB=m
 CONFIG_JOYSTICK_SPACEBALL=m
@@ -1095,39 +271,8 @@
 CONFIG_JOYSTICK_XPAD=m
 CONFIG_JOYSTICK_XPAD_FF=y
 CONFIG_JOYSTICK_XPAD_LEDS=y
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
 CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
-CONFIG_TOUCHSCREEN_USB_EGALAX=y
-CONFIG_TOUCHSCREEN_USB_PANJIT=y
-CONFIG_TOUCHSCREEN_USB_3M=y
-CONFIG_TOUCHSCREEN_USB_ITM=y
-CONFIG_TOUCHSCREEN_USB_ETURBO=y
-CONFIG_TOUCHSCREEN_USB_GUNZE=y
-CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
-CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
-CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
-CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
-CONFIG_TOUCHSCREEN_USB_GOTOP=y
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_ATI_REMOTE=m
 CONFIG_INPUT_ATI_REMOTE2=m
@@ -1137,666 +282,67 @@
 CONFIG_INPUT_CM109=m
 CONFIG_INPUT_UINPUT=m
 CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-CONFIG_GAMEPORT=m
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_RISCOM8 is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2412=y
-CONFIG_SERIAL_S3C2440=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
-# CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=y
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_ALGOBIT=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=m
-# CONFIG_SPI_BUTTERFLY is not set
 CONFIG_SPI_GPIO=m
-# CONFIG_SPI_LM70_LLP is not set
 CONFIG_SPI_S3C24XX=m
 CONFIG_SPI_S3C24XX_GPIO=m
-
-#
-# SPI Protocol Masters
-#
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPI_TLE62X0=m
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=m
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=m
-# CONFIG_SENSORS_LM77 is not set
 CONFIG_SENSORS_LM78=m
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
 CONFIG_SENSORS_LM85=m
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_S3C2410_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
-# CONFIG_MFD_SM501_GPIO is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_MEDIA_TUNER_MXL5007T=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEOBUF_GEN=m
-CONFIG_VIDEOBUF_VMALLOC=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_VIVI=m
-CONFIG_VIDEO_PMS=m
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_PP=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_VIDEO_AU0828=m
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_RADIO_CADET=m
-CONFIG_RADIO_RTRACK=m
-CONFIG_RADIO_RTRACK2=m
-CONFIG_RADIO_AZTECH=m
-CONFIG_RADIO_GEMTEK=m
-CONFIG_RADIO_SF16FMI=m
-CONFIG_RADIO_SF16FMR2=m
-CONFIG_RADIO_TERRATEC=m
-CONFIG_RADIO_TRUST=m
-CONFIG_RADIO_TYPHOON=m
-CONFIG_RADIO_TYPHOON_PROC_FS=y
-CONFIG_RADIO_ZOLTRIX=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_SI470X=m
-CONFIG_USB_MR800=m
-CONFIG_RADIO_TEA5764=m
-CONFIG_DVB_DYNAMIC_MINORS=y
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-# CONFIG_DVB_USB_A800 is not set
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-# CONFIG_DVB_USB_GL861 is not set
-# CONFIG_DVB_USB_AU6610 is not set
-# CONFIG_DVB_USB_DIGITV is not set
-# CONFIG_DVB_USB_VP7045 is not set
-# CONFIG_DVB_USB_VP702X is not set
-# CONFIG_DVB_USB_GP8PSK is not set
-# CONFIG_DVB_USB_NOVA_T_USB2 is not set
-# CONFIG_DVB_USB_TTUSB2 is not set
-# CONFIG_DVB_USB_DTT200U is not set
-# CONFIG_DVB_USB_OPERA1 is not set
-CONFIG_DVB_USB_AF9005=m
-# CONFIG_DVB_USB_AF9005_REMOTE is not set
-# CONFIG_DVB_USB_DW2102 is not set
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-# CONFIG_DVB_USB_ANYSEE is not set
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-# CONFIG_DVB_USB_CE6230 is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_LGDT330X=m
-CONFIG_DVB_LGDT3305=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-CONFIG_DVB_LGS8GL5=m
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C2410=y
-# CONFIG_FB_S3C2410_DEBUG is not set
 CONFIG_FB_SM501=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
 CONFIG_BACKLIGHT_PWM=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_JACK=y
 CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_USB_CAIAQ=m
-# CONFIG_SND_USB_CAIAQ_INPUT is not set
 CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_S3C24XX_SOC=y
-CONFIG_SND_S3C24XX_SOC_I2S=m
-CONFIG_SND_S3C_I2SV2_SOC=m
-CONFIG_SND_S3C2412_SOC_I2S=m
-CONFIG_SND_S3C2443_SOC_AC97=m
 CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
 CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
 CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
-CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_AC97_CODEC=m
-CONFIG_SND_SOC_L3=m
-CONFIG_SND_SOC_UDA134X=m
-CONFIG_SND_SOC_WM8750=m
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_APPLE=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
 CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_U132_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_WDM=m
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=m
 CONFIG_USB_STORAGE_FREECOM=m
 CONFIG_USB_STORAGE_ISD200=m
@@ -1809,69 +355,15 @@
 CONFIG_USB_STORAGE_KARMA=m
 CONFIG_USB_STORAGE_CYPRESS_ATACB=m
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_USS720=m
 CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=y
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
 CONFIG_USB_SERIAL_OPTION=m
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
@@ -1879,7 +371,6 @@
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-CONFIG_USB_BERRY_CHARGE=m
 CONFIG_USB_LED=m
 CONFIG_USB_CYPRESS_CY7C63=m
 CONFIG_USB_CYTHERM=m
@@ -1890,298 +381,64 @@
 CONFIG_USB_TRANCEVIBRATOR=m
 CONFIG_USB_IOWARRIOR=m
 CONFIG_USB_TEST=m
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=m
 CONFIG_MMC_TEST=m
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=m
 CONFIG_MMC_SPI=m
 CONFIG_MMC_S3C=y
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
 CONFIG_LEDS_S3C24XX=m
 CONFIG_LEDS_H1940=m
 CONFIG_LEDS_PCA9532=m
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_LEDS_LP5521=m
 CONFIG_LEDS_PCA955X=m
 CONFIG_LEDS_DAC124S085=m
 CONFIG_LEDS_PWM=m
 CONFIG_LEDS_BD2802=m
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_S3C=y
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-# CONFIG_EXT3_FS_SECURITY is not set
 CONFIG_EXT4_FS=m
-# CONFIG_EXT4DEV_COMPAT is not set
-CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_POSIX_ACL=y
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_JBD=y
-CONFIG_JBD2=m
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=m
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
@@ -2220,213 +477,13 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=m
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/s3c6400_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/s3c6400_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/s3c6400_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/s3c6400_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1011 +1,93 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc4
-# Tue Jan 19 13:12:40 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
 CONFIG_ARCH_S3C64XX=y
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-CONFIG_PLAT_SAMSUNG=y
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-# CONFIG_S3C_ADC is not set
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_I2C1=y
-CONFIG_S3C_DEV_FB=y
-CONFIG_S3C_DEV_USB_HOST=y
-CONFIG_S3C_DEV_USB_HSOTG=y
-CONFIG_S3C_DEV_NAND=y
-CONFIG_PLAT_S3C64XX=y
-CONFIG_CPU_S3C6400_INIT=y
-CONFIG_CPU_S3C6400_CLOCK=y
-# CONFIG_S3C64XX_DMA is not set
-CONFIG_S3C64XX_SETUP_I2C0=y
-CONFIG_S3C64XX_SETUP_I2C1=y
-CONFIG_S3C64XX_SETUP_FB_24BPP=y
-CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
-CONFIG_PLAT_S3C=y
-
-#
-# Boot options
-#
 CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_MACH_SMDK6400 is not set
-CONFIG_CPU_S3C6410=y
-CONFIG_S3C6410_SETUP_SDHCI=y
-# CONFIG_MACH_ANW6410 is not set
+CONFIG_MACH_SMDK6400=y
+CONFIG_MACH_ANW6410=y
 CONFIG_MACH_SMDK6410=y
-CONFIG_SMDK6410_SD_CH0=y
-# CONFIG_SMDK6410_SD_CH1 is not set
-# CONFIG_SMDK6410_WM1190_EV1 is not set
-# CONFIG_MACH_NCP is not set
-# CONFIG_MACH_HMT is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
+CONFIG_MACH_NCP=y
+CONFIG_MACH_HMT=y
+CONFIG_MACH_SMARTQ5=y
+CONFIG_MACH_SMARTQ7=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
+CONFIG_PM=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_S3C2410=y
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S3C6400=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_S3C2410=y
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_ADP5588 is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_S3C64XX=m
+CONFIG_FB=y
+CONFIG_FB_S3C=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_LTV350QV=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SOC=m
+CONFIG_SND_S3C24XX_SOC=m
+CONFIG_SND_SOC_SMDK_WM9713=m
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
 CONFIG_MMC_SDHCI_S3C=y
-# CONFIG_MMC_SDHCI_S3C_DMA is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_S3C=y
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/s5p6440_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/s5p6440_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/s5p6440_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/s5p6440_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,969 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Sat Jan  9 16:33:55 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
 CONFIG_ARCH_S5P6440=y
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-CONFIG_PLAT_SAMSUNG=y
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_PLAT_S3C=y
-
-#
-# Boot options
-#
 CONFIG_S3C_BOOT_ERROR_RESET=y
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-CONFIG_PLAT_S5P=y
-CONFIG_CPU_S5P6440_INIT=y
-CONFIG_CPU_S5P6440_CLOCK=y
-CONFIG_CPU_S5P6440=y
 CONFIG_MACH_SMDK6440=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5P6440=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/s5p6442_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/s5p6442_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/s5p6442_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/s5p6442_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,883 +1,65 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc4
-# Mon Jan 25 08:50:28 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
 CONFIG_ARCH_S5P6442=y
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-CONFIG_PLAT_SAMSUNG=y
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-# CONFIG_S3C_ADC is not set
-
-#
-# Power management
-#
-CONFIG_PLAT_S3C=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-CONFIG_PLAT_S5P=y
-CONFIG_CPU_S5P6442=y
 CONFIG_MACH_SMDK6442=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_411920 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5PV210=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/s5pc100_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/s5pc100_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/s5pc100_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/s5pc100_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,891 +1,49 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Wed Jul  1 15:53:07 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-CONFIG_ARCH_S5PC1XX=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_PLAT_S3C=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
-
-#
-# Power management
-#
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_PLAT_S5PC1XX=y
-CONFIG_CPU_S5PC100_INIT=y
-CONFIG_CPU_S5PC100_CLOCK=y
-CONFIG_S5PC100_SETUP_I2C0=y
-CONFIG_CPU_S5PC100=y
+CONFIG_ARCH_S5PC100=y
 CONFIG_MACH_SMDKC100=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS=3
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
 CONFIG_MMC_UNSAFE_RESUME=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
 CONFIG_SDIO_UART=y
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/s5pc110_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/s5pc110_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/s5pc110_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/s5pc110_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,894 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc4
-# Wed Feb 24 15:36:54 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
 CONFIG_ARCH_S5PV210=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_CPU_S5PV210=y
-# CONFIG_MACH_SMDKV210 is not set
 CONFIG_MACH_SMDKC110=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_VMSPLIT_3G is not set
 CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0x80000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=200
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5PV210=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/s5pv210_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/s5pv210_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/s5pv210_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/s5pv210_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,894 +1,66 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc4
-# Wed Feb 24 15:36:16 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5P6440 is not set
-# CONFIG_ARCH_S5P6442 is not set
-# CONFIG_ARCH_S5PC1XX is not set
 CONFIG_ARCH_S5PV210=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-CONFIG_PLAT_SAMSUNG=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_SAMSUNG_CLKSRC=y
-CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
-CONFIG_SAMSUNG_IRQ_UART=y
-CONFIG_SAMSUNG_GPIOLIB_4BIT=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_SAMSUNG_GPIO_EXTRA=0
-CONFIG_S3C_GPIO_SPACE=0
-CONFIG_S3C_GPIO_TRACK=y
-# CONFIG_S3C_ADC is not set
-
-#
-# Power management
-#
-CONFIG_PLAT_S5P=y
-CONFIG_CPU_S5PV210=y
 CONFIG_MACH_SMDKV210=y
-# CONFIG_MACH_SMDKC110 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_VMSPLIT_3G is not set
 CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0x80000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=200
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
-# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_S5PV210=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_ROMFS_BACKED_BY_BLOCK=y
-# CONFIG_ROMFS_BACKED_BY_MTD is not set
-# CONFIG_ROMFS_BACKED_BY_BOTH is not set
-CONFIG_ROMFS_ON_BLOCK=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
-# CONFIG_MINIX_SUBPARTITION is not set
 CONFIG_SOLARIS_X86_PARTITION=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_OC_ETM is not set
 CONFIG_DEBUG_S3C_UART=1
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/sam9_l9260_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/sam9_l9260_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/sam9_l9260_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/sam9_l9260_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,987 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Sun Oct 14 02:01:07 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 CONFIG_AUDIT=y
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
 CONFIG_MACH_SAM9_L9260=y
-
-#
-# AT91 Board Options
-#
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-# CONFIG_ATMEL_TCLIB is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_RESERVE=3
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
+# CONFIG_MISC_DEVICES is not set
 CONFIG_RAID_ATTRS=y
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-# CONFIG_MISC_DEVICES is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
 CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
-CONFIG_RTC_LIB=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
 CONFIG_RTC_DRV_DS1553=y
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_DS1742=y
 CONFIG_RTC_DRV_M48T86=y
-# CONFIG_RTC_DRV_M48T59 is not set
 CONFIG_RTC_DRV_V3020=y
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=y
 CONFIG_NLS_CODEPAGE_775=y
@@ -1020,77 +141,8 @@
 CONFIG_NLS_KOI8_R=y
 CONFIG_NLS_KOI8_U=y
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/shannon_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/shannon_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/shannon_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/shannon_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,869 +1,48 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:26:46 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
 CONFIG_SA1100_SHANNON=y
-# CONFIG_SA1100_SIMPAD is not set
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySA0,9600 console=tty1 root=/dev/mtdblock2 init=/linuxrc"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_IPV6 is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_IDEDISK is not set
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=y
-# CONFIG_PCMCIA_NMCLAN is not set
 CONFIG_PCMCIA_SMC91C92=y
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SA1100_WATCHDOG=y
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/shark_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/shark_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/shark_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/shark_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1248 +1,81 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-git6
-# Thu Jan  8 17:14:47 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
 CONFIG_ARCH_SHARK=y
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA110=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-CONFIG_ISA_DMA=y
-CONFIG_ISA_DMA_API=y
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCI_HOST_VIA82C505=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_SERIAL is not set
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_ATAPI=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-
-#
-# PCI IDE chipsets support
-#
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_IDE_ARM=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
 CONFIG_CS89x0=y
-CONFIG_CS89x0_NOEEPROM=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_R6040 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_NET_POCKET is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
 CONFIG_FB_CYBER2000=y
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-# CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_SOUND_OSS=m
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_SSCAPE is not set
-# CONFIG_SOUND_VMIDI is not set
-# CONFIG_SOUND_TRIX is not set
-# CONFIG_SOUND_MSS is not set
-# CONFIG_SOUND_MPU401 is not set
-# CONFIG_SOUND_PAS is not set
-# CONFIG_SOUND_PSS is not set
 CONFIG_SOUND_SB=m
-# CONFIG_SOUND_YM3812 is not set
-# CONFIG_SOUND_UART6850 is not set
-# CONFIG_SOUND_AEDSP16 is not set
-# CONFIG_SOUND_KAHLUA is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
 CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/simpad_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/simpad_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/simpad_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/simpad_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,451 +1,36 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:10:36 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="oe1"
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-
-#
-# SA11x0 Implementations
-#
-# CONFIG_SA1100_ASSABET is not set
-# CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_COLLIE is not set
-# CONFIG_SA1100_H3100 is not set
-# CONFIG_SA1100_H3600 is not set
-# CONFIG_SA1100_BADGE4 is not set
-# CONFIG_SA1100_JORNADA720 is not set
-# CONFIG_SA1100_HACKKIT is not set
-# CONFIG_SA1100_LART is not set
-# CONFIG_SA1100_PLEB is not set
-# CONFIG_SA1100_SHANNON is not set
 CONFIG_SA1100_SIMPAD=y
-# CONFIG_SA1100_SSP is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_SA1100=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_V4WB=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
-
-#
-# Processor Features
-#
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_SA1100=y
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mtdparts=sa1100:512k(boot),1m(kernel),-(root) console=ttySA0 root=1f02 noinitrd mem=64M jffs2_orphaned_inodes=delete rootfstype=jffs2"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-CONFIG_APM=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-# CONFIG_MTD_IMPA7 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-CONFIG_IRPORT_SIR=m
-
-#
-# Old Serial dongle support
-#
-# CONFIG_DONGLE_OLD is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=m
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
@@ -455,110 +40,33 @@
 CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_SA1100=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-CONFIG_PCMCIA_WAVELAN=m
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
 CONFIG_PCMCIA_SMC91C92=m
 CONFIG_PCMCIA_XIRC2PS=m
-# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -567,395 +75,37 @@
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=800
-CONFIG_INPUT_TSDEV_SCREEN_Y=600
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_SA1100=y
 CONFIG_SERIAL_SA1100_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_SA1100 is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
 CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
 CONFIG_REISERFS_PROC_INFO=y
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-# CONFIG_ROOT_NFS is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/spear300_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/spear300_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/spear300_defconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/configs/spear300_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,51 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_BINFMT_MISC=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_CRC32 is not set
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/spear310_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/spear310_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/spear310_defconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/configs/spear310_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,52 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_MACH_SPEAR310=y
+CONFIG_BINFMT_MISC=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_CRC32 is not set
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/spear320_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/spear320_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/spear320_defconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/configs/spear320_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,52 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_MACH_SPEAR320=y
+CONFIG_BINFMT_MISC=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_CRC32 is not set
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/spear600_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/spear600_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/spear600_defconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/configs/spear600_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,49 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR6XX=y
+CONFIG_BINFMT_MISC=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PL061=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_TMPFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_CRC32 is not set
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/spitz_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/spitz_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/spitz_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/spitz_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,539 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Mon Oct 20 10:25:37 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
 CONFIG_PXA_SHARPSL=y
-# CONFIG_MACH_POODLE is not set
-# CONFIG_MACH_CORGI is not set
-# CONFIG_MACH_SHEPHERD is not set
-# CONFIG_MACH_HUSKY is not set
 CONFIG_MACH_AKITA=y
-CONFIG_MACH_SPITZ=y
 CONFIG_MACH_BORZOI=y
-# CONFIG_MACH_TOSA is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SHARP_Cxx00=y
-CONFIG_PXA_SSP=y
-# CONFIG_PXA_PWM is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_SHARP_PARAM=y
-CONFIG_SHARPSL_PM=y
-CONFIG_SHARP_SCOOP=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_APM_EMULATION=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_XFRM_IPCOMP=m
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
-# CONFIG_IPV6_MIP6 is not set
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
-# CONFIG_IP_NF_TARGET_REJECT is not set
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
 CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_LOG is not set
 CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
 CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_KINGSUN_DONGLE is not set
-# CONFIG_KSDAZZLE_DONGLE is not set
-# CONFIG_KS959_DONGLE is not set
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
 CONFIG_PXA_FICP=m
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -543,18 +74,9 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -563,774 +85,105 @@
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_SHARP_SL=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_SHARPSL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_BLK_DEV_IDECS=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
 CONFIG_PCMCIA_PCNET=m
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
 CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_APMPOWER is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_CORGI is not set
-CONFIG_KEYBOARD_SPITZ=y
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_CORGI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-CONFIG_SENSORS_MAX1111=y
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_SMARTPANEL is not set
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_CORGI=y
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
 CONFIG_HID_PANTHERLORD=m
-# CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1338,483 +191,85 @@
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
-# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
-# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
-# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
-# CONFIG_USB_SERIAL_SAFE_PADDED is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
-# CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
 CONFIG_USB_CYTHERM=m
-# CONFIG_USB_PHIDGET is not set
 CONFIG_USB_IDMOUSE=m
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_WP512=m
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-
-#
-# Compression
-#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/stamp9g20_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/stamp9g20_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/stamp9g20_defconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/configs/stamp9g20_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,129 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_TREE_PREEMPT_RCU=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9G20=y
+CONFIG_MACH_PORTUXG20=y
+CONFIG_MACH_STAMP9G20=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+CONFIG_KEXEC=y
+CONFIG_CPU_IDLE=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_MISC_DEVICES is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_W1=y
+CONFIG_W1_MASTER_GPIO=y
+CONFIG_W1_SLAVE_THERM=y
+CONFIG_W1_SLAVE_DS2431=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_MMC=y
+# CONFIG_MMC_AT91 is not set
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_INOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_ARM_UNWIND is not set
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/stmp378x_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/stmp378x_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/stmp378x_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/stmp378x_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1140 +1,128 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Thu Apr 23 02:44:13 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-default"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_ARCH_STMP3XXX=y
-
-#
-# Freescale STMP3xxx implementations
-#
-# CONFIG_ARCH_STMP37XX is not set
 CONFIG_ARCH_STMP378X=y
-# CONFIG_MACH_STMP37XX is not set
-CONFIG_MACH_STMP378X=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
 CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
 CONFIG_MTD_UBI_GLUEBI=y
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
 CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_VIDEO_V4L1_COMPAT is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-
-#
-# RDS decoders
-#
-
-#
-# Video decoders
-#
-
-#
-# Video and audio decoders
-#
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
 CONFIG_DEBUG_OBJECTS=y
 CONFIG_DEBUG_OBJECTS_SELFTEST=y
 CONFIG_DEBUG_OBJECTS_FREE=y
 CONFIG_DEBUG_OBJECTS_TIMERS=y
-CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
 CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SLAB_LEAK=y
-CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
-CONFIG_LOCKDEP=y
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
 CONFIG_DEBUG_KOBJECT=y
-# CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-CONFIG_CONTEXT_SWITCH_TRACER=y
-# CONFIG_EVENT_TRACER is not set
 CONFIG_BOOT_TRACER=y
-# CONFIG_TRACE_BRANCH_PROFILING is not set
 CONFIG_STACK_TRACER=y
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
 CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-# CONFIG_SECURITY_TOMOYO is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ZLIB is not set
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-CONFIG_BINARY_PRINTF=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/stmp37xx_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/stmp37xx_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/stmp37xx_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/stmp37xx_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1001 +1,108 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29.1
-# Mon Apr 20 04:41:26 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-default"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 CONFIG_ARCH_STMP3XXX=y
-
-#
-# Freescale STMP3xxx implementations
-#
-CONFIG_ARCH_STMP37XX=y
-# CONFIG_ARCH_STMP378X is not set
-CONFIG_MACH_STMP37XX=y
-# CONFIG_MACH_STMP378X is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttySDBG0,115200 mem=32M lcd_panel=lms350 rdinit=/bin/sh ignore_loglevel"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
 CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_FW is not set
-# CONFIG_NET_CLS_U32 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=6144
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
 CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_STMP_DBG is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_VIDEO_V4L1_COMPAT is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-
-#
-# Encoders/decoders and other helper chips
-#
-
-#
-# Audio decoders
-#
-
-#
-# Video decoders
-#
-
-#
-# Video and audio decoders
-#
-
-#
-# MPEG video encoders
-#
-# CONFIG_VIDEO_CX2341X is not set
-
-#
-# Video encoders
-#
-
-#
-# Video improvement chips
-#
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-CONFIG_FUNCTION_TRACER=y
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_BOOT_TRACER=y
-# CONFIG_TRACE_BRANCH_PROFILING is not set
 CONFIG_STACK_TRACER=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_PATH is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
 CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/sx1_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/sx1_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/sx1_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/sx1_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1117 +1,110 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc1-omap1
-# Thu Jun  7 05:16:10 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 # CONFIG_BASE_FULL is not set
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
 CONFIG_SLOB=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-
-#
-# TI OMAP Implementations
-#
 CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP2 is not set
-
-#
-# OMAP Feature Selections
-#
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_BOOT_TAG=y
-# CONFIG_OMAP_BOOT_REASON is not set
-# CONFIG_OMAP_COMPONENT_VERSION is not set
-CONFIG_OMAP_GPIO_SWITCH=y
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_MCBSP=y
-CONFIG_OMAP_MMU_FWK=y
 CONFIG_OMAP_MBOX_FWK=y
-CONFIG_OMAP_MPU_TIMER=y
-# CONFIG_OMAP_32K_TIMER is not set
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-# CONFIG_OMAP_LL_DEBUG_LCD is not set
-CONFIG_OMAP_SERIAL_WAKE=y
-CONFIG_OMAP_DSP=y
-# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
-# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
-# CONFIG_OMAP_DSP_FBEXPORT is not set
-
-#
-# OMAP Core Type
-#
-# CONFIG_ARCH_OMAP730 is not set
-CONFIG_ARCH_OMAP15XX=y
-# CONFIG_ARCH_OMAP16XX is not set
-
-#
-# OMAP Board Type
-#
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_VOICEBLUE is not set
-# CONFIG_MACH_OMAP_PALMTE is not set
-# CONFIG_MACH_OMAP_PALMZ71 is not set
-# CONFIG_MACH_OMAP_PALMTT is not set
 CONFIG_MACH_SX1=y
-# CONFIG_MACH_AMS_DELTA is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
-
-#
-# OMAP CPU Speed
-#
-# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_150MHZ is not set
-# CONFIG_OMAP_ARM_120MHZ is not set
 # CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_OMAP_ARM_30MHZ is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM925T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=y
 # CONFIG_PROC_EVENTS is not set
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_OMAP=y
-# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_TLV320AIC23 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
 # CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
-# CONFIG_FB_OMAP_LCD_MIPID is not set
 CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-# CONFIG_FB_OMAP_DMA_TUNE is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
 CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_CLEAN_4x6 is not set
-# CONFIG_FONT_CLEAN_5x8 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_OMAP_AIC23 is not set
-# CONFIG_SND_OMAP_TSC2101 is not set
-CONFIG_SND_SX1=y
-# CONFIG_SND_OMAP_TSC2102 is not set
-# CONFIG_SND_OMAP24XX_EAC is not set
-
-#
-# System on Chip audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-
-#
-# MMC/SD Host Controller Drivers
-#
 CONFIG_MMC_OMAP=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_OMAP=y
-
-#
-# CBUS support
-#
-# CONFIG_CBUS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
+CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=866
 CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
 CONFIG_NLS_CODEPAGE_866=y
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
 CONFIG_NLS_CODEPAGE_1251=y
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
 CONFIG_NLS_ISO8859_5=y
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
 CONFIG_NLS_KOI8_R=y
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/tct_hammer_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/tct_hammer_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/tct_hammer_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/tct_hammer_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,883 +1,70 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7-hammer
-# Thu Mar 27 16:39:48 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-CONFIG_NO_IOPORT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
 CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
 CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_PLAT_S3C24XX=y
-# CONFIG_S3C2410_DMA is not set
-CONFIG_PLAT_S3C=y
-CONFIG_CPU_LLSERIAL_S3C2410_ONLY=y
-CONFIG_CPU_LLSERIAL_S3C2410=y
-
-#
-# Boot options
-#
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
-
-#
-# Power management
-#
-CONFIG_S3C_LOWLEVEL_UART_PORT=0
-
-#
-# S3C2400 Machines
-#
-CONFIG_CPU_S3C2410=y
-CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
-
-#
-# S3C2410 Machines
-#
-# CONFIG_ARCH_SMDK2410 is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_AML_M5900 is not set
 CONFIG_MACH_TCT_HAMMER=y
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_QT2410 is not set
-
-#
-# S3C2412 Machines
-#
-# CONFIG_MACH_SMDK2413 is not set
-# CONFIG_MACH_SMDK2412 is not set
-# CONFIG_MACH_VSTMS is not set
-
-#
-# S3C2440 Machines
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-
-#
-# S3C2442 Machines
-#
-
-#
-# S3C2443 Machines
-#
-# CONFIG_MACH_SMDK2443 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=200
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-# CONFIG_INET is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=10240
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
 CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
 CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
+CONFIG_USB_ETH=m
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
 # CONFIG_PROC_SYSCTL is not set
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/trizeps4_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/trizeps4_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/trizeps4_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/trizeps4_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,409 +1,53 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21
-# Mon Apr 30 21:23:20 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
 CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx Implementations
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
 CONFIG_TRIZEPS_PXA=y
 CONFIG_MACH_TRIZEPS4=y
-CONFIG_MACH_TRIZEPS4_CONXS=y
-# CONFIG_MACH_TRIZEPS4_ANY is not set
-CONFIG_PXA27x=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=y
 # CONFIG_PCMCIA_LOAD_CIS is not set
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
 CONFIG_PCMCIA_PXA2XX=y
-
-#
-# Kernel Features
-#
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
-CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=fe01 console=ttyS0,38400n8 loglevel=5"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
-# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-
-#
-# IP: Netfilter Configuration
-#
 CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
 CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
 CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
 CONFIG_IRLAN=m
 CONFIG_IRNET=m
 CONFIG_IRCOMM=m
 CONFIG_IRDA_ULTRA=y
-
-#
-# IrDA options
-#
 CONFIG_IRDA_CACHE_LAST_LSAP=y
 CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
 CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_PXA_FICP is not set
-# CONFIG_MCS_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 CONFIG_BT_SCO=m
@@ -413,370 +57,63 @@
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
 CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
 CONFIG_CFG80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_LE_BYTE_SWAP=y
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_BLOCK2MTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
 CONFIG_MTD_DOC2000=y
 CONFIG_MTD_DOC2001=y
 CONFIG_MTD_DOC2001PLUS=y
-CONFIG_MTD_DOCPROBE=y
-CONFIG_MTD_DOCECC=y
 CONFIG_MTD_DOCPROBE_ADVANCED=y
 CONFIG_MTD_DOCPROBE_ADDRESS=0x4000000
 CONFIG_MTD_DOCPROBE_HIGH=y
-# CONFIG_MTD_DOCPROBE_55AA is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_H1900 is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_DISKONCHIP=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
 CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=8
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_ESP_CORE is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 CONFIG_PATA_PCMCIA=m
 CONFIG_PATA_PLATFORM=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-# CONFIG_SMC911X is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_PCMCIA_RAYCS is not set
-CONFIG_HERMES=y
-# CONFIG_ATMEL is not set
-CONFIG_PCMCIA_HERMES=y
-CONFIG_PCMCIA_SPECTRUM=y
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
 CONFIG_HOSTAP=y
 CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 CONFIG_HOSTAP_CS=y
-# CONFIG_ZD1211RW is not set
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
+CONFIG_HERMES=y
+CONFIG_PCMCIA_HERMES=y
+CONFIG_PCMCIA_SPECTRUM=y
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -785,920 +122,105 @@
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=640
-CONFIG_INPUT_TSDEV_SCREEN_Y=480
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-CONFIG_TOUCHSCREEN_UCB1400=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_SA1100_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
 CONFIG_I2C_PXA=y
 CONFIG_I2C_PXA_SLAVE=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-CONFIG_NEW_LEDS=y
-# CONFIG_LEDS_CLASS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_WATCHDOG=y
+CONFIG_SA1100_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
 CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_SEQUENCER_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_DEBUG=y
-CONFIG_SND_DEBUG_DETECT=y
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-CONFIG_SND_PXA2XX_PCM=y
 CONFIG_SND_PXA2XX_AC97=y
-
-#
-# USB devices
-#
 CONFIG_SND_USB_AUDIO=m
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
 CONFIG_USB_GADGET_DUMMY_HCD=y
-CONFIG_USB_DUMMY_HCD=m
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
 CONFIG_MMC_PXA=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
+CONFIG_NEW_LEDS=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
 CONFIG_RTC_DRV_PCF8583=m
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
 CONFIG_LDM_PARTITION=y
-# CONFIG_LDM_DEBUG is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-15"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
-# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-# CONFIG_SECURITY_ROOTPLUG is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
-CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_DEC16=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/u300_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/u300_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/u300_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/u300_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1225 +1,107 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Wed Jan  6 00:01:36 2010
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_HAVE_TCM=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_TINY_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
 # CONFIG_AIO is not set
-
-#
-# Kernel Performance Events And Counters
-#
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_U300=y
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# ST-Ericsson AB U300/U330/U335/U365 Platform
-#
-
-#
-# ST-Ericsson Mobile Platform Products
-#
 CONFIG_MACH_U300=y
-
-#
-# ST-Ericsson U300/U330/U335/U365 Feature Selections
-#
-# CONFIG_MACH_U300_BS2X is not set
-# CONFIG_MACH_U300_BS330 is not set
 CONFIG_MACH_U300_BS335=y
-# CONFIG_MACH_U300_BS365 is not set
-# CONFIG_MACH_U300_SINGLE_RAM is not set
 CONFIG_MACH_U300_DUAL_RAM=y
 CONFIG_U300_DEBUG=y
-# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
 CONFIG_MACH_U300_SPIDUMMY=y
-
-#
-# All the settings below must match the bootloader's settings
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_VIC=y
-CONFIG_ARM_VIC_NR=2
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
 # CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
 CONFIG_MTD_NAND_ECC_SMC=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_GPIO is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-CONFIG_I2C_STU300=y
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPI_PL022=y
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_DESIGNWARE is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_COH901327_WATCHDOG=y
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-CONFIG_AB3100_CORE=y
-CONFIG_AB3100_OTP=y
-# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
-# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-CONFIG_REGULATOR_AB3100=y
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
 CONFIG_SND_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_LT3593 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_AB3100=y
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
 CONFIG_RTC_DRV_COH901331=y
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
 CONFIG_COH901318=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/u8500_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/u8500_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/u8500_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/u8500_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,679 +1,58 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc8
-# Mon Nov 30 11:11:29 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_LOCKBREAK=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
 CONFIG_ARCH_U8500=y
-CONFIG_PLAT_NOMADIK=y
-CONFIG_HAS_MTU=y
-
-#
-# ST-Ericsson platform type
-#
-
-#
-# ST-Ericsson Multicore Mobile Platforms
-#
-CONFIG_MACH_U8500_MOP=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_GIC=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_NR_CPUS=2
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-CONFIG_VFPv3=y
 CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
 CONFIG_SPI_PL022=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
 # CONFIG_MISC_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/usb-a9260_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/usb-a9260_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/usb-a9260_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/usb-a9260_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1141 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 11:39:35 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9260 Variants
-#
-# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
-
-#
-# AT91SAM9260 / AT91SAM9XE Board Type
-#
-# CONFIG_MACH_AT91SAM9260EK is not set
-# CONFIG_MACH_CAM60 is not set
-# CONFIG_MACH_SAM9_L9260 is not set
 CONFIG_MACH_USB_A9260=y
-# CONFIG_MACH_QIL_A9260 is not set
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_USB_ETH=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/usb-a9263_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/usb-a9263_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/usb-a9263_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/usb-a9263_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1133 +1,106 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Tue Apr 15 11:15:19 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-# CONFIG_ARCH_AT91RM9200 is not set
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91CAP9 is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91SAM9263 Board Type
-#
-# CONFIG_MACH_AT91SAM9263EK is not set
 CONFIG_MACH_USB_A9263=y
-
-#
-# AT91 Board Options
-#
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
 CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_TIMER_HZ=100
-CONFIG_AT91_EARLY_DBGU=y
-# CONFIG_AT91_EARLY_USART0 is not set
-# CONFIG_AT91_EARLY_USART1 is not set
-# CONFIG_AT91_EARLY_USART2 is not set
-# CONFIG_AT91_EARLY_USART3 is not set
-# CONFIG_AT91_EARLY_USART4 is not set
-# CONFIG_AT91_EARLY_USART5 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SUSPEND=y
-# CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
 CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
-# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-# CONFIG_SPI_BITBANG is not set
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
 # CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-CONFIG_USB_GADGET_AT91=y
-CONFIG_USB_AT91=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_USB_ETH=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/versatile_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/versatile_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/versatile_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/versatile_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1000 +1,84 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Mon May  8 20:15:57 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_VERSATILE=y
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# Versatile platform type
-#
-CONFIG_ARCH_VERSATILE_PB=y
 CONFIG_MACH_VERSATILE_AB=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-CONFIG_ARM_VIC=y
-CONFIG_ICST307=y
-
-#
-# Bus support
-#
-CONFIG_ARM_AMBA=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
+CONFIG_EEPROM_LEGACY=m
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
 CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=m
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
 CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_FIRMWARE_EDID is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_ARMCLCD=y
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
 CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
 CONFIG_SND_ARMAACI=m
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
 CONFIG_MMC_ARMMMCI=m
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_MINIX_FS=y
+CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/viper_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/viper_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/viper_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/viper_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1676 +1,174 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 17:12:07 2008
-#
-CONFIG_ARM=y
-CONFIG_HAVE_PWM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=13
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
 CONFIG_ARCH_VIPER=y
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_EZX is not set
-CONFIG_PXA25x=y
-CONFIG_PXA_PWM=m
-CONFIG_PXA_HAVE_ISA_IRQS=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_PXA2XX=m
-CONFIG_PCMCIA_PROBE=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_FPE_NWFPE is not set
 CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_SHARP_SL is not set
-# CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_SPARSE_RAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
 CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
 CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-CONFIG_USB_NET_NET1080=m
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_USB_NET_ZAURUS=m
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 CONFIG_INPUT_MOUSEDEV=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_FUJITSU=m
-# CONFIG_TOUCHSCREEN_GUNZE is not set
 CONFIG_TOUCHSCREEN_ELO=m
 CONFIG_TOUCHSCREEN_MTOUCH=m
 CONFIG_TOUCHSCREEN_INEXIO=m
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HTCPEN=m
 CONFIG_TOUCHSCREEN_PENMOUNT=m
 CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
 CONFIG_TOUCHSCREEN_TOUCHWIN=m
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
 # CONFIG_CONSOLE_TRANSLATIONS is not set
 # CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=5
 CONFIG_SERIAL_8250_RUNTIME_UARTS=5
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=m
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_AM200EPD is not set
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-# CONFIG_BACKLIGHT_CORGI is not set
 CONFIG_BACKLIGHT_PWM=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
 CONFIG_SND_PXA2XX_AC97=m
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-CONFIG_SND_PCMCIA=y
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_ISP116X_HCD=m
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_SL811_HCD=m
-# CONFIG_USB_SL811_CS is not set
 CONFIG_USB_R8A66597_HCD=m
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA25X=y
-CONFIG_USB_PXA25X=m
-# CONFIG_USB_PXA25X_SMALL is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
 CONFIG_RTC_DRV_DS1307=m
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=m
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=m
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
 CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/xcep_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/xcep_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/xcep_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/xcep_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1128 +1,99 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 09:02:37 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=".xcep-itech"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 # CONFIG_UID16 is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_AIO=y
-
-#
-# Performance Counters
-#
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-# CONFIG_SLUB is not set
 CONFIG_SLOB=y
-# CONFIG_PROFILING is not set
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
-CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLOCK is not set
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_VIPER is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_TRIZEPS_PXA is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-# CONFIG_MACH_ZYLONITE is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_PXA_EZX is not set
 CONFIG_MACH_XCEP=y
-CONFIG_PXA25x=y
-CONFIG_PXA_SSP=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
-# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_LRO=y
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
 # CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
 # CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_DEVKMEM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
-CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=m
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=m
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
 CONFIG_SENSORS_ADM1021=m
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1619 is not set
 CONFIG_SENSORS_MAX6650=m
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_SA1100=m
-# CONFIG_RTC_DRV_PXA is not set
 CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_FILE_LOCKING=y
-# CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_FS_WBUF_VERIFY=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="utf8"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
 CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_ARM_UNWIND is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/yl9200_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/yl9200_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/yl9200_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/yl9200_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,1215 +1,137 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 11 09:53:59 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Atmel AT91 System-on-Chip
-#
-CONFIG_ARCH_AT91RM9200=y
-# CONFIG_ARCH_AT91SAM9260 is not set
-# CONFIG_ARCH_AT91SAM9261 is not set
-# CONFIG_ARCH_AT91SAM9263 is not set
-# CONFIG_ARCH_AT91SAM9RL is not set
-# CONFIG_ARCH_AT91X40 is not set
-CONFIG_AT91_PMC_UNIT=y
-
-#
-# AT91RM9200 Board Type
-#
-# CONFIG_MACH_ONEARM is not set
 CONFIG_ARCH_AT91RM9200DK=y
-# CONFIG_MACH_AT91RM9200EK is not set
-# CONFIG_MACH_CSB337 is not set
-# CONFIG_MACH_CSB637 is not set
-# CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_ATEB9200 is not set
-# CONFIG_MACH_KB9200 is not set
-# CONFIG_MACH_PICOTUX2XX is not set
-# CONFIG_MACH_KAFA is not set
 CONFIG_MACH_YL9200=y
-
-#
-# AT91 Board Options
-#
-# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-
-#
-# AT91 Feature Selections
-#
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4T=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
 # CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
 CONFIG_MTD_PLATRAM=y
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
 CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_ATMEL=y
-# CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=3
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
 CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_TTYAT is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_DEBUG=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
 CONFIG_SPI_ATMEL=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_S1D135XX=y
-# CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_LTV350QV is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
-
-#
-# Display device support
-#
 CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_USB_HIDDEV is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
 CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
 CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_M66592=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-CONFIG_USB_FILE_STORAGE=y
-# CONFIG_USB_FILE_STORAGE_TEST is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_FILE_STORAGE=m
 CONFIG_MMC=y
 CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-CONFIG_MMC_AT91=y
+CONFIG_MMC_AT91=m
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-
-#
-# LED drivers
-#
 CONFIG_LEDS_GPIO=y
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
 CONFIG_RTC_DRV_AT91RM9200=y
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
 CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_RUBIN=y
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
 CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
 CONFIG_SLUB_DEBUG_ON=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_LIST=y
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/configs/zeus_defconfig linux-libre-2.6.35-gnu/arch/arm/configs/zeus_defconfig
--- linux-libre-2.6.34-gnu/arch/arm/configs/zeus_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/configs/zeus_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,2031 +1,189 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32
-# Tue Dec  8 20:27:05 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
 CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_TINY_RCU=y
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=13
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-CONFIG_INLINE_SPIN_UNLOCK=y
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Intel/Marvell Dev Platforms (sorted by hardware release time)
-#
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_MACH_ZYLONITE300 is not set
-# CONFIG_MACH_ZYLONITE320 is not set
-# CONFIG_MACH_LITTLETON is not set
-# CONFIG_MACH_TAVOREVB is not set
-# CONFIG_MACH_SAAR is not set
-
-#
-# Third Party Dev Platforms (sorted by vendor name)
-#
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_ARCH_VIPER is not set
 CONFIG_MACH_ARCOM_ZEUS=y
-# CONFIG_MACH_BALLOON3 is not set
-# CONFIG_MACH_CSB726 is not set
-# CONFIG_MACH_ARMCORE is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_EXEDA is not set
-# CONFIG_MACH_CM_X300 is not set
-# CONFIG_ARCH_GUMSTIX is not set
-# CONFIG_MACH_INTELMOTE2 is not set
-# CONFIG_MACH_STARGATE2 is not set
-# CONFIG_MACH_XCEP is not set
-# CONFIG_TRIZEPS_PXA is not set
-CONFIG_ARCOM_PCMCIA=y
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_PCM027 is not set
-# CONFIG_MACH_COLIBRI is not set
-# CONFIG_MACH_COLIBRI300 is not set
-# CONFIG_MACH_COLIBRI320 is not set
-
-#
-# End-user Products (sorted by vendor name)
-#
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_H5000 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_MIOA701 is not set
-# CONFIG_PXA_EZX is not set
-# CONFIG_MACH_MP900C is not set
-# CONFIG_ARCH_PXA_PALM is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_ARCH_PXA_ESERIES is not set
-CONFIG_PXA27x=y
-CONFIG_PXA_SSP=y
-CONFIG_PXA_HAVE_BOARD_IRQS=y
-CONFIG_PXA_HAVE_ISA_IRQS=y
-CONFIG_PLAT_PXA=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_XSCALE=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_IWMMXT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=m
-CONFIG_PCMCIA=m
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-
-#
-# PC-card bridges
-#
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_SOC_COMMON=m
 CONFIG_PCMCIA_PXA2XX=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA_PROBE=y
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
 CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
 CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
-
-#
-# Networking options
-#
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
-# CONFIG_BT_SCO is not set
 CONFIG_BT_RFCOMM=m
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WEXT_PRIV=y
 CONFIG_CFG80211=m
-# CONFIG_NL80211_TESTMODE is not set
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
-# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_MINSTREL=y
-# CONFIG_MAC80211_RC_DEFAULT_PID is not set
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_DEFAULT="minstrel"
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
 CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
 CONFIG_MTD_CFI=y
 CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
 CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
 # CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
 CONFIG_MTD_PXA2XX=y
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_IMPA7 is not set
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-
-#
-# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
-#
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_DS1682 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
 CONFIG_EEPROM_AT24=m
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_IWMC3200TOP is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
 CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_ATA_VERBOSE_ERROR=y
 # CONFIG_SATA_PMP is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
 CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
 CONFIG_DM9000=y
-CONFIG_DM9000_DEBUGLEVEL=4
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_DNET is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-CONFIG_WLAN=y
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_ATH_COMMON is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_IWM is not set
-# CONFIG_LIBERTAS is not set
 CONFIG_HERMES=m
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
 CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_P54_COMMON is not set
 CONFIG_RT2X00=m
-# CONFIG_RT2500USB is not set
 CONFIG_RT73USB=m
-# CONFIG_RT2800USB is not set
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-CONFIG_RT2X00_LIB_LEDS=y
-# CONFIG_RT2X00_DEBUG is not set
-# CONFIG_WL12XX is not set
-# CONFIG_ZD1211RW is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_WAN is not set
 CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
 CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=m
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
 CONFIG_TOUCHSCREEN_FUJITSU=m
-# CONFIG_TOUCHSCREEN_GUNZE is not set
 CONFIG_TOUCHSCREEN_ELO=m
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
 CONFIG_TOUCHSCREEN_MTOUCH=m
 CONFIG_TOUCHSCREEN_INEXIO=m
-# CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HTCPEN=m
 CONFIG_TOUCHSCREEN_PENMOUNT=m
 CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
 CONFIG_TOUCHSCREEN_TOUCHWIN=m
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 CONFIG_TOUCHSCREEN_TOUCHIT213=m
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=m
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=7
 CONFIG_SERIAL_8250_RUNTIME_UARTS=7
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_PXA is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_GPIO=y
-# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
-# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PXA2XX=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
 CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Native drivers
-#
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
 CONFIG_SENSORS_LM75=m
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SA1100_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_MEDIA_SUPPORT is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=m
-# CONFIG_FB_PXA_OVERLAY is not set
-# CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_W100 is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_GENERIC=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_PXA2XX_PCM=m
-CONFIG_SND_PXA2XX_LIB=m
-CONFIG_SND_PXA2XX_LIB_AC97=y
 CONFIG_SND_PXA2XX_AC97=m
 # CONFIG_SND_SPI is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
 # CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
 CONFIG_SND_PXA2XX_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=m
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
 CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
 CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
 CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=m
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=m
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
-# CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
-# CONFIG_USB_MIDI_GADGET is not set
 CONFIG_USB_G_PRINTER=m
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-CONFIG_USB_OTG_UTILS=y
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
-
-#
-# LED drivers
-#
-# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_BD2802 is not set
-
-#
-# LED Triggers
-#
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-
-#
-# iptables trigger is under Netfilter config (LED target)
-#
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
 CONFIG_RTC_DRV_ISL1208=m
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_SA1100 is not set
 CONFIG_RTC_DRV_PXA=m
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
 CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
 CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
 CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
-# CONFIG_BOOT_TRACER is not set
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
 CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_OC_ETM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_DEFAULT_SECURITY_SELINUX is not set
-# CONFIG_DEFAULT_SECURITY_SMACK is not set
-# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=m
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/atomic.h linux-libre-2.6.35-gnu/arch/arm/include/asm/atomic.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/atomic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/atomic.h	2010-08-01 18:11:14.000000000 -0400
@@ -24,7 +24,7 @@
  * strex/ldrex monitor on some implementations. The reason we can use it for
  * atomic_set() is the clrex or dummy strex done on every exception return.
  */
-#define atomic_read(v)	((v)->counter)
+#define atomic_read(v)	(*(volatile int *)&(v)->counter)
 #define atomic_set(v,i)	(((v)->counter) = (i))
 
 #if __LINUX_ARM_ARCH__ >= 6
@@ -40,12 +40,12 @@
 	int result;
 
 	__asm__ __volatile__("@ atomic_add\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	add	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 }
@@ -58,12 +58,12 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic_add_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	add	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
@@ -78,12 +78,12 @@
 	int result;
 
 	__asm__ __volatile__("@ atomic_sub\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	sub	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 }
@@ -96,12 +96,12 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic_sub_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	sub	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
@@ -118,11 +118,11 @@
 
 	do {
 		__asm__ __volatile__("@ atomic_cmpxchg\n"
-		"ldrex	%1, [%2]\n"
+		"ldrex	%1, [%3]\n"
 		"mov	%0, #0\n"
-		"teq	%1, %3\n"
-		"strexeq %0, %4, [%2]\n"
-		    : "=&r" (res), "=&r" (oldval)
+		"teq	%1, %4\n"
+		"strexeq %0, %5, [%3]\n"
+		    : "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
 		    : "r" (&ptr->counter), "Ir" (old), "r" (new)
 		    : "cc");
 	} while (res);
@@ -137,12 +137,12 @@
 	unsigned long tmp, tmp2;
 
 	__asm__ __volatile__("@ atomic_clear_mask\n"
-"1:	ldrex	%0, [%2]\n"
-"	bic	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	bic	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2)
+	: "=&r" (tmp), "=&r" (tmp2), "+Qo" (*addr)
 	: "r" (addr), "Ir" (mask)
 	: "cc");
 }
@@ -249,7 +249,7 @@
 	__asm__ __volatile__("@ atomic64_read\n"
 "	ldrexd	%0, %H0, [%1]"
 	: "=&r" (result)
-	: "r" (&v->counter)
+	: "r" (&v->counter), "Qo" (v->counter)
 	);
 
 	return result;
@@ -260,11 +260,11 @@
 	u64 tmp;
 
 	__asm__ __volatile__("@ atomic64_set\n"
-"1:	ldrexd	%0, %H0, [%1]\n"
-"	strexd	%0, %2, %H2, [%1]\n"
+"1:	ldrexd	%0, %H0, [%2]\n"
+"	strexd	%0, %3, %H3, [%2]\n"
 "	teq	%0, #0\n"
 "	bne	1b"
-	: "=&r" (tmp)
+	: "=&r" (tmp), "=Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 }
@@ -275,13 +275,13 @@
 	unsigned long tmp;
 
 	__asm__ __volatile__("@ atomic64_add\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	adds	%0, %0, %3\n"
-"	adc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	adds	%0, %0, %4\n"
+"	adc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 }
@@ -294,13 +294,13 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_add_return\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	adds	%0, %0, %3\n"
-"	adc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	adds	%0, %0, %4\n"
+"	adc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 
@@ -315,13 +315,13 @@
 	unsigned long tmp;
 
 	__asm__ __volatile__("@ atomic64_sub\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	subs	%0, %0, %3\n"
-"	sbc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	subs	%0, %0, %4\n"
+"	sbc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 }
@@ -334,13 +334,13 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_sub_return\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	subs	%0, %0, %3\n"
-"	sbc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	subs	%0, %0, %4\n"
+"	sbc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 
@@ -358,12 +358,12 @@
 
 	do {
 		__asm__ __volatile__("@ atomic64_cmpxchg\n"
-		"ldrexd		%1, %H1, [%2]\n"
+		"ldrexd		%1, %H1, [%3]\n"
 		"mov		%0, #0\n"
-		"teq		%1, %3\n"
-		"teqeq		%H1, %H3\n"
-		"strexdeq	%0, %4, %H4, [%2]"
-		: "=&r" (res), "=&r" (oldval)
+		"teq		%1, %4\n"
+		"teqeq		%H1, %H4\n"
+		"strexdeq	%0, %5, %H5, [%3]"
+		: "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
 		: "r" (&ptr->counter), "r" (old), "r" (new)
 		: "cc");
 	} while (res);
@@ -381,11 +381,11 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_xchg\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	strexd	%1, %3, %H3, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	strexd	%1, %4, %H4, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (ptr->counter)
 	: "r" (&ptr->counter), "r" (new)
 	: "cc");
 
@@ -402,16 +402,16 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_dec_if_positive\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
 "	subs	%0, %0, #1\n"
 "	sbc	%H0, %H0, #0\n"
 "	teq	%H0, #0\n"
 "	bmi	2f\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b\n"
 "2:"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter)
 	: "cc");
 
@@ -429,18 +429,18 @@
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_add_unless\n"
-"1:	ldrexd	%0, %H0, [%3]\n"
-"	teq	%0, %4\n"
-"	teqeq	%H0, %H4\n"
+"1:	ldrexd	%0, %H0, [%4]\n"
+"	teq	%0, %5\n"
+"	teqeq	%H0, %H5\n"
 "	moveq	%1, #0\n"
 "	beq	2f\n"
-"	adds	%0, %0, %5\n"
-"	adc	%H0, %H0, %H5\n"
-"	strexd	%2, %0, %H0, [%3]\n"
+"	adds	%0, %0, %6\n"
+"	adc	%H0, %H0, %H6\n"
+"	strexd	%2, %0, %H0, [%4]\n"
 "	teq	%2, #0\n"
 "	bne	1b\n"
 "2:"
-	: "=&r" (val), "=&r" (ret), "=&r" (tmp)
+	: "=&r" (val), "+r" (ret), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (u), "r" (a)
 	: "cc");
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/hardirq.h linux-libre-2.6.35-gnu/arch/arm/include/asm/hardirq.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/hardirq.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/hardirq.h	2010-08-01 18:11:14.000000000 -0400
@@ -12,7 +12,9 @@
 
 #include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
 
-#if NR_IRQS > 256
+#if NR_IRQS > 512
+#define HARDIRQ_BITS	10
+#elif NR_IRQS > 256
 #define HARDIRQ_BITS	9
 #else
 #define HARDIRQ_BITS	8
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/arm_timer.h linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/arm_timer.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/arm_timer.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/arm_timer.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,21 +1,30 @@
 #ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
 #define __ASM_ARM_HARDWARE_ARM_TIMER_H
 
-#define TIMER_LOAD	0x00
-#define TIMER_VALUE	0x04
-#define TIMER_CTRL	0x08
-#define TIMER_CTRL_ONESHOT	(1 << 0)
-#define TIMER_CTRL_32BIT	(1 << 1)
-#define TIMER_CTRL_DIV1		(0 << 2)
-#define TIMER_CTRL_DIV16	(1 << 2)
-#define TIMER_CTRL_DIV256	(2 << 2)
-#define TIMER_CTRL_IE		(1 << 5)	/* Interrupt Enable (versatile only) */
-#define TIMER_CTRL_PERIODIC	(1 << 6)
-#define TIMER_CTRL_ENABLE	(1 << 7)
+/*
+ * ARM timer implementation, found in Integrator, Versatile and Realview
+ * platforms.  Not all platforms support all registers and bits in these
+ * registers, so we mark them with A for Integrator AP, C for Integrator
+ * CP, V for Versatile and R for Realview.
+ *
+ * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview
+ * can have 16-bit or 32-bit selectable via a bit in the control register.
+ */
+#define TIMER_LOAD	0x00			/* ACVR rw */
+#define TIMER_VALUE	0x04			/* ACVR ro */
+#define TIMER_CTRL	0x08			/* ACVR rw */
+#define TIMER_CTRL_ONESHOT	(1 << 0)	/*  CVR */
+#define TIMER_CTRL_32BIT	(1 << 1)	/*  CVR */
+#define TIMER_CTRL_DIV1		(0 << 2)	/* ACVR */
+#define TIMER_CTRL_DIV16	(1 << 2)	/* ACVR */
+#define TIMER_CTRL_DIV256	(2 << 2)	/* ACVR */
+#define TIMER_CTRL_IE		(1 << 5)	/*   VR */
+#define TIMER_CTRL_PERIODIC	(1 << 6)	/* ACVR */
+#define TIMER_CTRL_ENABLE	(1 << 7)	/* ACVR */
 
-#define TIMER_INTCLR	0x0c
-#define TIMER_RIS	0x10
-#define TIMER_MIS	0x14
-#define TIMER_BGLOAD	0x18
+#define TIMER_INTCLR	0x0c			/* ACVR wo */
+#define TIMER_RIS	0x10			/*  CVR ro */
+#define TIMER_MIS	0x14			/*  CVR ro */
+#define TIMER_BGLOAD	0x18			/*  CVR rw */
 
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/cache-l2x0.h linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/cache-l2x0.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/cache-l2x0.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/cache-l2x0.h	2010-08-01 18:11:14.000000000 -0400
@@ -21,6 +21,9 @@
 #define __ASM_ARM_HARDWARE_L2X0_H
 
 #define L2X0_CACHE_ID			0x000
+#define   L2X0_CACHE_ID_PART_MASK	(0xf << 6)
+#define   L2X0_CACHE_ID_PART_L210	(1 << 6)
+#define   L2X0_CACHE_ID_PART_L310	(3 << 6)
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/icst307.h linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/icst307.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/icst307.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/icst307.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,38 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/icst307.h
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICS307
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- *
- *  This file is similar to the icst525.h file
- */
-#ifndef ASMARM_HARDWARE_ICST307_H
-#define ASMARM_HARDWARE_ICST307_H
-
-struct icst307_params {
-	unsigned long	ref;
-	unsigned long	vco_max;	/* inclusive */
-	unsigned short	vd_min;		/* inclusive */
-	unsigned short	vd_max;		/* inclusive */
-	unsigned char	rd_min;		/* inclusive */
-	unsigned char	rd_max;		/* inclusive */
-};
-
-struct icst307_vco {
-	unsigned short	v;
-	unsigned char	r;
-	unsigned char	s;
-};
-
-unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco);
-struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq);
-struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period);
-
-#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/icst525.h linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/icst525.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/icst525.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/icst525.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,36 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/icst525.h
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST525
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- */
-#ifndef ASMARM_HARDWARE_ICST525_H
-#define ASMARM_HARDWARE_ICST525_H
-
-struct icst525_params {
-	unsigned long	ref;
-	unsigned long	vco_max;	/* inclusive */
-	unsigned short	vd_min;		/* inclusive */
-	unsigned short	vd_max;		/* inclusive */
-	unsigned char	rd_min;		/* inclusive */
-	unsigned char	rd_max;		/* inclusive */
-};
-
-struct icst525_vco {
-	unsigned short	v;
-	unsigned char	r;
-	unsigned char	s;
-};
-
-unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco);
-struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq);
-struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period);
-
-#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/icst.h linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/icst.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/icst.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/icst.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,59 @@
+/*
+ *  arch/arm/include/asm/hardware/icst.h
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICST
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ */
+#ifndef ASMARM_HARDWARE_ICST_H
+#define ASMARM_HARDWARE_ICST_H
+
+struct icst_params {
+	unsigned long	ref;
+	unsigned long	vco_max;	/* inclusive */
+	unsigned long	vco_min;	/* exclusive */
+	unsigned short	vd_min;		/* inclusive */
+	unsigned short	vd_max;		/* inclusive */
+	unsigned char	rd_min;		/* inclusive */
+	unsigned char	rd_max;		/* inclusive */
+	const unsigned char *s2div;	/* chip specific s2div array */
+	const unsigned char *idx2s;	/* chip specific idx2s array */
+};
+
+struct icst_vco {
+	unsigned short	v;
+	unsigned char	r;
+	unsigned char	s;
+};
+
+unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco);
+struct icst_vco icst_hz_to_vco(const struct icst_params *p, unsigned long freq);
+
+/*
+ * ICST307 VCO frequency must be between 6MHz and 200MHz (3.3 or 5V).
+ * This frequency is pre-output divider.
+ */
+#define ICST307_VCO_MIN	6000000
+#define ICST307_VCO_MAX	200000000
+
+extern const unsigned char icst307_s2div[];
+extern const unsigned char icst307_idx2s[];
+
+/*
+ * ICST525 VCO frequency must be between 10MHz and 200MHz (3V) or 320MHz (5V).
+ * This frequency is pre-output divider.
+ */
+#define ICST525_VCO_MIN		10000000
+#define ICST525_VCO_MAX_3V	200000000
+#define ICST525_VCO_MAX_5V	320000000
+
+extern const unsigned char icst525_s2div[];
+extern const unsigned char icst525_idx2s[];
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/pl330.h linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/pl330.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/pl330.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/pl330.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,217 @@
+/* linux/include/asm/hardware/pl330.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __PL330_CORE_H
+#define __PL330_CORE_H
+
+#define PL330_MAX_CHAN		8
+#define PL330_MAX_IRQS		32
+#define PL330_MAX_PERI		32
+
+enum pl330_srccachectrl {
+	SCCTRL0 = 0, /* Noncacheable and nonbufferable */
+	SCCTRL1, /* Bufferable only */
+	SCCTRL2, /* Cacheable, but do not allocate */
+	SCCTRL3, /* Cacheable and bufferable, but do not allocate */
+	SINVALID1,
+	SINVALID2,
+	SCCTRL6, /* Cacheable write-through, allocate on reads only */
+	SCCTRL7, /* Cacheable write-back, allocate on reads only */
+};
+
+enum pl330_dstcachectrl {
+	DCCTRL0 = 0, /* Noncacheable and nonbufferable */
+	DCCTRL1, /* Bufferable only */
+	DCCTRL2, /* Cacheable, but do not allocate */
+	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
+	DINVALID1 = 8,
+	DINVALID2,
+	DCCTRL6, /* Cacheable write-through, allocate on writes only */
+	DCCTRL7, /* Cacheable write-back, allocate on writes only */
+};
+
+/* Populated by the PL330 core driver for DMA API driver's info */
+struct pl330_config {
+	u32	periph_id;
+	u32	pcell_id;
+#define DMAC_MODE_NS	(1 << 0)
+	unsigned int	mode;
+	unsigned int	data_bus_width:10; /* In number of bits */
+	unsigned int	data_buf_dep:10;
+	unsigned int	num_chan:4;
+	unsigned int	num_peri:6;
+	u32		peri_ns;
+	unsigned int	num_events:6;
+	u32		irq_ns;
+};
+
+/* Handle to the DMAC provided to the PL330 core */
+struct pl330_info {
+	/* Owning device */
+	struct device *dev;
+	/* Size of MicroCode buffers for each channel. */
+	unsigned mcbufsz;
+	/* ioremap'ed address of PL330 registers. */
+	void __iomem	*base;
+	/* Client can freely use it. */
+	void	*client_data;
+	/* PL330 core data, Client must not touch it. */
+	void	*pl330_data;
+	/* Populated by the PL330 core driver during pl330_add */
+	struct pl330_config	pcfg;
+	/*
+	 * If the DMAC has some reset mechanism, then the
+	 * client may want to provide pointer to the method.
+	 */
+	void (*dmac_reset)(struct pl330_info *pi);
+};
+
+enum pl330_byteswap {
+	SWAP_NO = 0,
+	SWAP_2,
+	SWAP_4,
+	SWAP_8,
+	SWAP_16,
+};
+
+/**
+ * Request Configuration.
+ * The PL330 core does not modify this and uses the last
+ * working configuration if the request doesn't provide any.
+ *
+ * The Client may want to provide this info only for the
+ * first request and a request with new settings.
+ */
+struct pl330_reqcfg {
+	/* Address Incrementing */
+	unsigned dst_inc:1;
+	unsigned src_inc:1;
+
+	/*
+	 * For now, the SRC & DST protection levels
+	 * and burst size/length are assumed same.
+	 */
+	bool nonsecure;
+	bool privileged;
+	bool insnaccess;
+	unsigned brst_len:5;
+	unsigned brst_size:3; /* in power of 2 */
+
+	enum pl330_dstcachectrl dcctl;
+	enum pl330_srccachectrl scctl;
+	enum pl330_byteswap swap;
+};
+
+/*
+ * One cycle of DMAC operation.
+ * There may be more than one xfer in a request.
+ */
+struct pl330_xfer {
+	u32 src_addr;
+	u32 dst_addr;
+	/* Size to xfer */
+	u32 bytes;
+	/*
+	 * Pointer to next xfer in the list.
+	 * The last xfer in the req must point to NULL.
+	 */
+	struct pl330_xfer *next;
+};
+
+/* The xfer callbacks are made with one of these arguments. */
+enum pl330_op_err {
+	/* The all xfers in the request were success. */
+	PL330_ERR_NONE,
+	/* If req aborted due to global error. */
+	PL330_ERR_ABORT,
+	/* If req failed due to problem with Channel. */
+	PL330_ERR_FAIL,
+};
+
+enum pl330_reqtype {
+	MEMTOMEM,
+	MEMTODEV,
+	DEVTOMEM,
+	DEVTODEV,
+};
+
+/* A request defining Scatter-Gather List ending with NULL xfer. */
+struct pl330_req {
+	enum pl330_reqtype rqtype;
+	/* Index of peripheral for the xfer. */
+	unsigned peri:5;
+	/* Unique token for this xfer, set by the client. */
+	void *token;
+	/* Callback to be called after xfer. */
+	void (*xfer_cb)(void *token, enum pl330_op_err err);
+	/* If NULL, req will be done at last set parameters. */
+	struct pl330_reqcfg *cfg;
+	/* Pointer to first xfer in the request. */
+	struct pl330_xfer *x;
+};
+
+/*
+ * To know the status of the channel and DMAC, the client
+ * provides a pointer to this structure. The PL330 core
+ * fills it with current information.
+ */
+struct pl330_chanstatus {
+	/*
+	 * If the DMAC engine halted due to some error,
+	 * the client should remove-add DMAC.
+	 */
+	bool dmac_halted;
+	/*
+	 * If channel is halted due to some error,
+	 * the client should ABORT/FLUSH and START the channel.
+	 */
+	bool faulting;
+	/* Location of last load */
+	u32 src_addr;
+	/* Location of last store */
+	u32 dst_addr;
+	/*
+	 * Pointer to the currently active req, NULL if channel is
+	 * inactive, even though the requests may be present.
+	 */
+	struct pl330_req *top_req;
+	/* Pointer to req waiting second in the queue if any. */
+	struct pl330_req *wait_req;
+};
+
+enum pl330_chan_op {
+	/* Start the channel */
+	PL330_OP_START,
+	/* Abort the active xfer */
+	PL330_OP_ABORT,
+	/* Stop xfer and flush queue */
+	PL330_OP_FLUSH,
+};
+
+extern int pl330_add(struct pl330_info *);
+extern void pl330_del(struct pl330_info *pi);
+extern int pl330_update(const struct pl330_info *pi);
+extern void pl330_release_channel(void *ch_id);
+extern void *pl330_request_channel(const struct pl330_info *pi);
+extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus);
+extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op);
+extern int pl330_submit_req(void *ch_id, struct pl330_req *r);
+
+#endif	/* __PL330_CORE_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/sp810.h linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/sp810.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/hardware/sp810.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/hardware/sp810.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/include/asm/hardware/sp810.h
+ *
+ * ARM PrimeXsys System Controller SP810 header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARM_SP810_H
+#define __ASM_ARM_SP810_H
+
+#include <linux/io.h>
+
+/* sysctl registers offset */
+#define SCCTRL			0x000
+#define SCSYSSTAT		0x004
+#define SCIMCTRL		0x008
+#define SCIMSTAT		0x00C
+#define SCXTALCTRL		0x010
+#define SCPLLCTRL		0x014
+#define SCPLLFCTRL		0x018
+#define SCPERCTRL0		0x01C
+#define SCPERCTRL1		0x020
+#define SCPEREN			0x024
+#define SCPERDIS		0x028
+#define SCPERCLKEN		0x02C
+#define SCPERSTAT		0x030
+#define SCSYSID0		0xEE0
+#define SCSYSID1		0xEE4
+#define SCSYSID2		0xEE8
+#define SCSYSID3		0xEEC
+#define SCITCR			0xF00
+#define SCITIR0			0xF04
+#define SCITIR1			0xF08
+#define SCITOR			0xF0C
+#define SCCNTCTRL		0xF10
+#define SCCNTDATA		0xF14
+#define SCCNTSTEP		0xF18
+#define SCPERIPHID0		0xFE0
+#define SCPERIPHID1		0xFE4
+#define SCPERIPHID2		0xFE8
+#define SCPERIPHID3		0xFEC
+#define SCPCELLID0		0xFF0
+#define SCPCELLID1		0xFF4
+#define SCPCELLID2		0xFF8
+#define SCPCELLID3		0xFFC
+
+static inline void sysctl_soft_reset(void __iomem *base)
+{
+	/* writing any value to SCSYSSTAT reg will reset system */
+	writel(0, base + SCSYSSTAT);
+}
+
+#endif	/* __ASM_ARM_SP810_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/ioctls.h linux-libre-2.6.35-gnu/arch/arm/include/asm/ioctls.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/ioctls.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/ioctls.h	2010-08-01 18:11:14.000000000 -0400
@@ -53,6 +53,9 @@
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
 
+#define TIOCGRS485      0x542E
+#define TIOCSRS485      0x542F
+
 #define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
 #define FIOCLEX		0x5451
 #define FIOASYNC	0x5452
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/io.h linux-libre-2.6.35-gnu/arch/arm/include/asm/io.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/io.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/io.h	2010-08-01 18:11:14.000000000 -0400
@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/memory.h>
+#include <asm/system.h>
 
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
@@ -179,25 +180,38 @@
  * IO port primitives for more information.
  */
 #ifdef __mem_pci
-#define readb(c) ({ __u8  __v = __raw_readb(__mem_pci(c)); __v; })
-#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \
+#define readb_relaxed(c) ({ u8  __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw_relaxed(c) ({ u16 __v = le16_to_cpu((__force __le16) \
 					__raw_readw(__mem_pci(c))); __v; })
-#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \
+#define readl_relaxed(c) ({ u32 __v = le32_to_cpu((__force __le32) \
 					__raw_readl(__mem_pci(c))); __v; })
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
+
+#define writeb_relaxed(v,c)	((void)__raw_writeb(v,__mem_pci(c)))
+#define writew_relaxed(v,c)	((void)__raw_writew((__force u16) \
+					cpu_to_le16(v),__mem_pci(c)))
+#define writel_relaxed(v,c)	((void)__raw_writel((__force u32) \
+					cpu_to_le32(v),__mem_pci(c)))
+
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+#define __iormb()		rmb()
+#define __iowmb()		wmb()
+#else
+#define __iormb()		do { } while (0)
+#define __iowmb()		do { } while (0)
+#endif
+
+#define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
+#define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
+#define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+
+#define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
+#define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
+#define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
 
 #define readsb(p,d,l)		__raw_readsb(__mem_pci(p),d,l)
 #define readsw(p,d,l)		__raw_readsw(__mem_pci(p),d,l)
 #define readsl(p,d,l)		__raw_readsl(__mem_pci(p),d,l)
 
-#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
-#define writew(v,c)		__raw_writew((__force __u16) \
-					cpu_to_le16(v),__mem_pci(c))
-#define writel(v,c)		__raw_writel((__force __u32) \
-					cpu_to_le32(v),__mem_pci(c))
-
 #define writesb(p,d,l)		__raw_writesb(__mem_pci(p),d,l)
 #define writesw(p,d,l)		__raw_writesw(__mem_pci(p),d,l)
 #define writesl(p,d,l)		__raw_writesl(__mem_pci(p),d,l)
@@ -244,13 +258,13 @@
  * io{read,write}{8,16,32} macros
  */
 #ifndef ioread8
-#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __v; })
-#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; })
-#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; })
+#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __iormb(); __v; })
+#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __iormb(); __v; })
+#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __iormb(); __v; })
 
-#define iowrite8(v,p)	__raw_writeb(v, p)
-#define iowrite16(v,p)	__raw_writew((__force __u16)cpu_to_le16(v), p)
-#define iowrite32(v,p)	__raw_writel((__force __u32)cpu_to_le32(v), p)
+#define iowrite8(v,p)	({ __iowmb(); (void)__raw_writeb(v, p); })
+#define iowrite16(v,p)	({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_le16(v), p); })
+#define iowrite32(v,p)	({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_le32(v), p); })
 
 #define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
 #define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/kmap_types.h linux-libre-2.6.35-gnu/arch/arm/include/asm/kmap_types.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/kmap_types.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/kmap_types.h	2010-08-01 18:11:14.000000000 -0400
@@ -20,6 +20,7 @@
 	KM_SOFTIRQ1,
 	KM_L1_CACHE,
 	KM_L2_CACHE,
+	KM_KDB,
 	KM_TYPE_NR
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/mach/pci.h linux-libre-2.6.35-gnu/arch/arm/include/asm/mach/pci.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/mach/pci.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/mach/pci.h	2010-08-01 18:11:14.000000000 -0400
@@ -8,10 +8,16 @@
  * published by the Free Software Foundation.
  */
 
+#ifndef __ASM_MACH_PCI_H
+#define __ASM_MACH_PCI_H
+
 struct pci_sys_data;
 struct pci_bus;
 
 struct hw_pci {
+#ifdef CONFIG_PCI_DOMAINS
+	int		domain;
+#endif
 	struct list_head buses;
 	int		nr_controllers;
 	int		(*setup)(int nr, struct pci_sys_data *);
@@ -26,6 +32,9 @@
  * Per-controller structure
  */
 struct pci_sys_data {
+#ifdef CONFIG_PCI_DOMAINS
+	int		domain;
+#endif
 	struct list_head node;
 	int		busnr;		/* primary bus number			*/
 	u64		mem_offset;	/* bus->cpu memory mapping offset	*/
@@ -70,3 +79,5 @@
 extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
 extern void pci_v3_preinit(void);
 extern void pci_v3_postinit(void);
+
+#endif /* __ASM_MACH_PCI_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/mach/time.h linux-libre-2.6.35-gnu/arch/arm/include/asm/mach/time.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/mach/time.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/mach/time.h	2010-08-01 18:11:14.000000000 -0400
@@ -38,7 +38,7 @@
 	void			(*init)(void);
 	void			(*suspend)(void);
 	void			(*resume)(void);
-#ifndef CONFIG_GENERIC_TIME
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 	unsigned long		(*offset)(void);
 #endif
 };
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/mach/udc_pxa2xx.h linux-libre-2.6.35-gnu/arch/arm/include/asm/mach/udc_pxa2xx.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/mach/udc_pxa2xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/mach/udc_pxa2xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -21,8 +21,8 @@
 	 * here.  Note that sometimes the signals go through inverters...
 	 */
 	bool	gpio_vbus_inverted;
-	u16	gpio_vbus;			/* high == vbus present */
+	int	gpio_vbus;			/* high == vbus present */
 	bool	gpio_pullup_inverted;
-	u16	gpio_pullup;			/* high == pullup activated */
+	int	gpio_pullup;			/* high == pullup activated */
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/pci.h linux-libre-2.6.35-gnu/arch/arm/include/asm/pci.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/pci.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/pci.h	2010-08-01 18:11:14.000000000 -0400
@@ -4,8 +4,23 @@
 #ifdef __KERNEL__
 #include <asm-generic/pci-dma-compat.h>
 
+#include <asm/mach/pci.h> /* for pci_sys_data */
 #include <mach/hardware.h> /* for PCIBIOS_MIN_* */
 
+#ifdef CONFIG_PCI_DOMAINS
+static inline int pci_domain_nr(struct pci_bus *bus)
+{
+	struct pci_sys_data *root = bus->sysdata;
+
+	return root->domain;
+}
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return pci_domain_nr(bus);
+}
+#endif /* CONFIG_PCI_DOMAINS */
+
 #ifdef CONFIG_PCI_HOST_ITE8152
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PIC bus mater devices
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/perf_event.h linux-libre-2.6.35-gnu/arch/arm/include/asm/perf_event.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/perf_event.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/perf_event.h	2010-08-01 18:11:14.000000000 -0400
@@ -28,4 +28,21 @@
  * same indexes here for consistency. */
 #define PERF_EVENT_INDEX_OFFSET 1
 
+/* ARM perf PMU IDs for use by internal perf clients. */
+enum arm_perf_pmu_ids {
+	ARM_PERF_PMU_ID_XSCALE1	= 0,
+	ARM_PERF_PMU_ID_XSCALE2,
+	ARM_PERF_PMU_ID_V6,
+	ARM_PERF_PMU_ID_V6MP,
+	ARM_PERF_PMU_ID_CA8,
+	ARM_PERF_PMU_ID_CA9,
+	ARM_NUM_PMU_IDS,
+};
+
+extern enum arm_perf_pmu_ids
+armpmu_get_pmu_id(void);
+
+extern int
+armpmu_get_max_events(void);
+
 #endif /* __ARM_PERF_EVENT_H__ */
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/pgtable.h linux-libre-2.6.35-gnu/arch/arm/include/asm/pgtable.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/pgtable.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/pgtable.h	2010-08-01 18:11:14.000000000 -0400
@@ -314,7 +314,7 @@
 	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
 #define pgprot_writecombine(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
-#if __LINUX_ARM_ARCH__ >= 7
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
 #else
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/pmu.h linux-libre-2.6.35-gnu/arch/arm/include/asm/pmu.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/pmu.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/pmu.h	2010-08-01 18:11:14.000000000 -0400
@@ -12,33 +12,33 @@
 #ifndef __ARM_PMU_H__
 #define __ARM_PMU_H__
 
-#ifdef CONFIG_CPU_HAS_PMU
-
-struct pmu_irqs {
-	const int   *irqs;
-	int	    num_irqs;
+enum arm_pmu_type {
+	ARM_PMU_DEVICE_CPU	= 0,
+	ARM_NUM_PMU_DEVICES,
 };
 
+#ifdef CONFIG_CPU_HAS_PMU
+
 /**
  * reserve_pmu() - reserve the hardware performance counters
  *
  * Reserve the hardware performance counters in the system for exclusive use.
- * The 'struct pmu_irqs' for the system is returned on success, ERR_PTR()
+ * The platform_device for the system is returned on success, ERR_PTR()
  * encoded error on failure.
  */
-extern const struct pmu_irqs *
-reserve_pmu(void);
+extern struct platform_device *
+reserve_pmu(enum arm_pmu_type device);
 
 /**
  * release_pmu() - Relinquish control of the performance counters
  *
  * Release the performance counters and allow someone else to use them.
  * Callers must have disabled the counters and released IRQs before calling
- * this. The 'struct pmu_irqs' returned from reserve_pmu() must be passed as
+ * this. The platform_device returned from reserve_pmu() must be passed as
  * a cookie.
  */
 extern int
-release_pmu(const struct pmu_irqs *irqs);
+release_pmu(struct platform_device *pdev);
 
 /**
  * init_pmu() - Initialise the PMU.
@@ -48,24 +48,26 @@
  * the actual hardware initialisation.
  */
 extern int
-init_pmu(void);
+init_pmu(enum arm_pmu_type device);
 
 #else /* CONFIG_CPU_HAS_PMU */
 
-static inline const struct pmu_irqs *
-reserve_pmu(void)
+#include <linux/err.h>
+
+static inline struct platform_device *
+reserve_pmu(enum arm_pmu_type device)
 {
 	return ERR_PTR(-ENODEV);
 }
 
 static inline int
-release_pmu(const struct pmu_irqs *irqs)
+release_pmu(struct platform_device *pdev)
 {
 	return -ENODEV;
 }
 
 static inline int
-init_pmu(void)
+init_pmu(enum arm_pmu_type device)
 {
 	return -ENODEV;
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/processor.h linux-libre-2.6.35-gnu/arch/arm/include/asm/processor.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/processor.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/processor.h	2010-08-01 18:11:14.000000000 -0400
@@ -91,7 +91,11 @@
 
 unsigned long get_wchan(struct task_struct *p);
 
+#if __LINUX_ARM_ARCH__ == 6
+#define cpu_relax()			smp_mb()
+#else
 #define cpu_relax()			barrier()
+#endif
 
 /*
  * Create a new kernel thread
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/arm/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -3,25 +3,6 @@
 
 #include <asm/memory.h>
 #include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;		/* buffer offset		 */
-	dma_addr_t	dma_address;	/* dma address			 */
-	unsigned int	length;		/* length			 */
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
+#include <asm-generic/scatterlist.h>
 
 #endif /* _ASMARM_SCATTERLIST_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/smp.h linux-libre-2.6.35-gnu/arch/arm/include/asm/smp.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/smp.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/smp.h	2010-08-01 18:11:14.000000000 -0400
@@ -82,7 +82,7 @@
 extern struct secondary_data secondary_data;
 
 extern int __cpu_disable(void);
-extern int mach_cpu_disable(unsigned int cpu);
+extern int platform_cpu_disable(unsigned int cpu);
 
 extern void __cpu_die(unsigned int cpu);
 extern void cpu_die(void);
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/system.h linux-libre-2.6.35-gnu/arch/arm/include/asm/system.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/system.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/system.h	2010-08-01 18:11:14.000000000 -0400
@@ -141,7 +141,7 @@
 
 #ifdef CONFIG_ARCH_HAS_BARRIERS
 #include <mach/barriers.h>
-#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
 #define mb()		do { dsb(); outer_sync(); } while (0)
 #define rmb()		dmb()
 #define wmb()		mb()
diff -druN linux-libre-2.6.34-gnu/arch/arm/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/arm/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/arm/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -141,7 +141,7 @@
 #define TIF_SYSCALL_TRACE	8
 #define TIF_POLLING_NRFLAG	16
 #define TIF_USING_IWMMXT	17
-#define TIF_MEMDIE		18
+#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
 #define TIF_RESTORE_SIGMASK	20
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/Kconfig linux-libre-2.6.35-gnu/arch/arm/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -13,7 +13,7 @@
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	select GENERIC_ATOMIC64 if (!CPU_32v6K)
-	select HAVE_OPROFILE
+	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if (!XIP_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
@@ -21,6 +21,7 @@
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
+	select HAVE_KERNEL_LZMA
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
 	help
@@ -42,6 +43,11 @@
 
 config GENERIC_TIME
 	bool
+	default y
+
+config ARCH_USES_GETTIMEOFFSET
+	bool
+	default n
 
 config GENERIC_CLOCKEVENTS
 	bool
@@ -175,28 +181,6 @@
 	help
 	  Setting ARM L1 cache line size to 64 Bytes.
 
-if OPROFILE
-
-config OPROFILE_ARMV6
-	def_bool y
-	depends on CPU_V6 && !SMP
-	select OPROFILE_ARM11_CORE
-
-config OPROFILE_MPCORE
-	def_bool y
-	depends on CPU_V6 && SMP
-	select OPROFILE_ARM11_CORE
-
-config OPROFILE_ARM11_CORE
-	bool
-
-config OPROFILE_ARMV7
-	def_bool y
-	depends on CPU_V7 && !SMP
-	bool
-
-endif
-
 config VECTORS_BASE
 	hex
 	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
@@ -231,6 +215,7 @@
 	select CPU_ARM920T
 	select ARM_AMBA
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Agilent AAEC-2000
 
@@ -238,21 +223,22 @@
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
 	select ARCH_HAS_CPUFREQ
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select ICST525
+	select ICST
+	select GENERIC_CLOCKEVENTS
+	select PLAT_VERSATILE
 	help
 	  Support for ARM's Integrator platform.
 
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select ICST307
-	select GENERIC_TIME
+	select ICST
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select PLAT_VERSATILE
+	select ARM_TIMER_SP804
 	select GPIO_PL061 if GPIOLIB
 	help
 	  This enables support for ARM Ltd RealView boards.
@@ -261,20 +247,33 @@
 	bool "ARM Ltd. Versatile family"
 	select ARM_AMBA
 	select ARM_VIC
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select ICST307
-	select GENERIC_TIME
+	select ICST
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select PLAT_VERSATILE
+	select ARM_TIMER_SP804
 	help
 	  This enables support for ARM Ltd Versatile board.
 
+config ARCH_VEXPRESS
+	bool "ARM Ltd. Versatile Express family"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_AMBA
+	select ARM_TIMER_SP804
+	select COMMON_CLKDEV
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	select ICST
+	select PLAT_VERSATILE
+	help
+	  This enables support for the ARM Ltd Versatile Express boards.
+
 config ARCH_AT91
 	bool "Atmel AT91"
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -285,7 +284,6 @@
 	select CPU_V6
 	select ARM_AMBA
 	select COMMON_CLKDEV
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
@@ -294,14 +292,23 @@
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x-based"
 	select CPU_ARM720T
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
+config ARCH_CNS3XXX
+	bool "Cavium Networks CNS3XXX family"
+	select CPU_V6
+	select GENERIC_CLOCKEVENTS
+	select ARM_GIC
+	help
+	  Support for Cavium Networks CNS3XXX platform.
+
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	select CPU_FA526
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
@@ -310,6 +317,7 @@
 	select CPU_SA110
 	select ISA
 	select NO_IOPORT
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -321,11 +329,10 @@
 	select CPU_ARM920T
 	select ARM_AMBA
 	select ARM_VIC
-	select GENERIC_GPIO
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -333,16 +340,15 @@
 	bool "FootBridge"
 	select CPU_SA110
 	select FOOTBRIDGE
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
 config ARCH_MXC
 	bool "Freescale MXC/iMX-based"
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	help
 	  Support for Freescale MXC/iMX-based family of processors
@@ -350,12 +356,9 @@
 config ARCH_STMP3XXX
 	bool "Freescale STMP3xxx"
 	select CPU_ARM926T
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select USB_ARCH_HAS_EHCI
 	help
 	  Support for systems based on the Freescale 3xxx CPUs.
@@ -365,7 +368,6 @@
 	select CPU_ARM926T
 	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_TIME
 	help
 	  This enables support for systems based on the Hilscher NetX Soc
 
@@ -373,6 +375,7 @@
 	bool "Hynix HMS720x-based"
 	select CPU_ARM720T
 	select ISA_DMA_API
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
@@ -393,7 +396,6 @@
 	select CPU_XSCALE
 	select PLAT_IOP
 	select PCI
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
@@ -405,7 +407,6 @@
 	select CPU_XSCALE
 	select PLAT_IOP
 	select PCI
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
@@ -415,6 +416,7 @@
 	depends on MMU
 	select CPU_XSC3
  	select PCI
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Intel's IXP23xx (XScale) family of processors.
 
@@ -423,6 +425,7 @@
 	depends on MMU
 	select CPU_XSCALE
 	select PCI
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Intel's IXP2400/2800 (XScale) family of processors.
 
@@ -431,7 +434,6 @@
 	depends on MMU
 	select CPU_XSCALE
 	select GENERIC_GPIO
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select DMABOUNCE if PCI
 	help
@@ -441,6 +443,7 @@
 	bool "LinkUp-L7200"
 	select CPU_ARM720T
 	select FIQ
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Say Y here if you intend to run this kernel on a LinkUp Systems
 	  L7200 Software Development Board which uses an ARM720T processor.
@@ -454,9 +457,7 @@
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select PCI
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
 	help
@@ -466,9 +467,7 @@
 	bool "Marvell Kirkwood"
 	select CPU_FEROCEON
 	select PCI
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
 	help
@@ -478,7 +477,6 @@
 config ARCH_LOKI
 	bool "Marvell Loki (88RC8480)"
 	select CPU_FEROCEON
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
 	help
@@ -488,9 +486,7 @@
 	bool "Marvell MV78xx0"
 	select CPU_FEROCEON
 	select PCI
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
 	help
@@ -502,9 +498,7 @@
 	depends on MMU
 	select CPU_FEROCEON
 	select PCI
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
 	help
@@ -515,11 +509,8 @@
 config ARCH_MMP
 	bool "Marvell PXA168/910/MMP2"
 	depends on MMU
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
 	select PLAT_PXA
@@ -529,8 +520,8 @@
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
 	select CPU_ARM922T
-	select GENERIC_GPIO
-        select ARCH_REQUIRE_GPIOLIB
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
@@ -539,7 +530,6 @@
 	bool "NetSilicon NS9xxx"
 	select CPU_ARM926T
 	select GENERIC_GPIO
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	help
@@ -552,10 +542,7 @@
 	bool "Nuvoton W90X900 CPU"
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_GPIO
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
@@ -569,7 +556,6 @@
 config ARCH_NUC93X
 	bool "Nuvoton NUC93X CPU"
 	select CPU_ARM926T
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	help
 	  Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
@@ -578,8 +564,8 @@
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
-	select HAVE_CLK
 	select COMMON_CLKDEV
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for Philips PNX4008 mobile platform.
 
@@ -588,11 +574,8 @@
 	depends on MMU
 	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
-	select GENERIC_GPIO
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
 	select PLAT_PXA
@@ -601,14 +584,14 @@
 
 config ARCH_MSM
 	bool "Qualcomm MSM"
-	select CPU_V6
-	select GENERIC_TIME
+	select HAVE_CLK
 	select GENERIC_CLOCKEVENTS
 	help
-	  Support for Qualcomm MSM7K based systems.  This runs on the ARM11
-	  apps processor of the MSM7K and depends on a shared memory
-	  interface to the ARM9 modem processor which runs the baseband stack
-	  and controls some vital subsystems (clock and power control, etc).
+	  Support for Qualcomm MSM/QSD based systems.  This runs on the
+	  apps processor of the MSM/QSD and depends on a shared memory
+	  interface to the modem processor which runs the baseband
+	  stack and controls some vital subsystems
+	  (clock and power control, etc).
 
 config ARCH_SHMOBILE
 	bool "Renesas SH-Mobile"
@@ -625,6 +608,7 @@
 	select ISA_DMA_API
 	select NO_IOPORT
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -637,8 +621,6 @@
 	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
 	select CPU_FREQ
-	select GENERIC_GPIO
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	select TICK_ONESHOT
@@ -647,23 +629,28 @@
 	  Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
-	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
+	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
 	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
 	  the Samsung SMDK2410 development board (and derivatives).
 
+	  Note, the S3C2416 and the S3C2450 are so close that they even share
+	  the same SoC ID code. This means that there is no seperate machine
+	  directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
+
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select PLAT_SAMSUNG
 	select CPU_V6
-	select GENERIC_GPIO
 	select ARM_VIC
 	select HAVE_CLK
 	select NO_IOPORT
+	select ARCH_USES_GETTIMEOFFSET
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select SAMSUNG_CLKSRC
@@ -684,6 +671,7 @@
 	select CPU_V6
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Samsung S5P6440 CPU based systems
 
@@ -692,17 +680,19 @@
 	select CPU_V6
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Samsung S5P6442 CPU based systems
 
-config ARCH_S5PC1XX
-	bool "Samsung S5PC1XX"
+config ARCH_S5PC100
+	bool "Samsung S5PC100"
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select CPU_V7
 	select ARM_L1_CACHE_SHIFT_6
+	select ARCH_USES_GETTIMEOFFSET
 	help
-	  Samsung S5PC1XX series based systems
+	  Samsung S5PC100 series based systems
 
 config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
@@ -710,6 +700,7 @@
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARM_L1_CACHE_SHIFT_6
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
@@ -720,6 +711,7 @@
 	select ISA_DMA
 	select ZONE_DMA
 	select PCI
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -729,6 +721,7 @@
 	select CPU_ARM922T
 	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Say Y here for systems based on one of the Sharp LH7A40X
 	  System on a Chip processors.  These CPUs include an ARM922T
@@ -742,9 +735,7 @@
 	select HAVE_TCM
 	select ARM_AMBA
 	select ARM_VIC
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select GENERIC_GPIO
 	help
@@ -754,9 +745,9 @@
 	bool "ST-Ericsson U8500 Series"
 	select CPU_V7
 	select ARM_AMBA
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select COMMON_CLKDEV
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for ST-Ericsson's Ux500 architecture
 
@@ -765,23 +756,16 @@
 	select ARM_AMBA
 	select ARM_VIC
 	select CPU_ARM926T
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Nomadik platform by ST-Ericsson
 
 config ARCH_DAVINCI
 	bool "TI DaVinci"
-	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
 	select ZONE_DMA
 	select HAVE_IDE
 	select COMMON_CLKDEV
@@ -792,16 +776,24 @@
 
 config ARCH_OMAP
 	bool "TI OMAP"
-	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
+config PLAT_SPEAR
+	bool "ST SPEAr"
+	select ARM_AMBA
+	select ARCH_REQUIRE_GPIOLIB
+	select COMMON_CLKDEV
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
+	help
+	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
+
 endchoice
 
 #
@@ -817,6 +809,8 @@
 
 source "arch/arm/mach-clps711x/Kconfig"
 
+source "arch/arm/mach-cns3xxx/Kconfig"
+
 source "arch/arm/mach-davinci/Kconfig"
 
 source "arch/arm/mach-dove/Kconfig"
@@ -886,12 +880,14 @@
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s5p/Kconfig"
-source "arch/arm/plat-s5pc1xx/Kconfig"
+
+source "arch/arm/plat-spear/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2416/Kconfig"
 source "arch/arm/mach-s3c2440/Kconfig"
 source "arch/arm/mach-s3c2443/Kconfig"
 endif
@@ -904,9 +900,7 @@
 
 source "arch/arm/mach-s5p6442/Kconfig"
 
-if ARCH_S5PC1XX
 source "arch/arm/mach-s5pc100/Kconfig"
-endif
 
 source "arch/arm/mach-s5pv210/Kconfig"
 
@@ -920,6 +914,8 @@
 
 source "arch/arm/mach-versatile/Kconfig"
 
+source "arch/arm/mach-vexpress/Kconfig"
+
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
@@ -929,7 +925,6 @@
 config PLAT_IOP
 	bool
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_TIME
 
 config PLAT_ORION
 	bool
@@ -937,6 +932,12 @@
 config PLAT_PXA
 	bool
 
+config PLAT_VERSATILE
+	bool
+
+config ARM_TIMER_SP804
+	bool
+
 source arch/arm/mm/Kconfig
 
 config IWMMXT
@@ -954,7 +955,8 @@
 	default y
 
 config CPU_HAS_PMU
-	depends on CPU_V6 || CPU_V7 || XSCALE_PMU
+	depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+		   (!ARCH_OMAP3 || OMAP3_EMU)
 	default y
 	bool
 
@@ -1065,6 +1067,10 @@
 	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
 	  VESA. If you have PCI, say Y, otherwise N.
 
+config PCI_DOMAINS
+	bool
+	depends on PCI
+
 config PCI_SYSCALL
 	def_bool PCI
 
@@ -1093,10 +1099,11 @@
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
+		 ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
 	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1277,7 +1284,7 @@
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && CPU_HAS_PMU && (CPU_V6 || CPU_V7)
+	depends on PERF_EVENTS && CPU_HAS_PMU
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
@@ -1415,6 +1422,17 @@
 	  time by entering them here. As a minimum, you should specify the
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
 
+config CMDLINE_FORCE
+	bool "Always use the default kernel command string"
+	depends on CMDLINE != ""
+	help
+	  Always use the default kernel command string, even if the boot
+	  loader passes other arguments to the kernel.
+	  This is useful if you cannot or don't want to change the
+	  command-line options your boot loader passes to the kernel.
+
+	  If unsure, say N.
+
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
 	depends on !ZBOOT_ROM
diff -druN linux-libre-2.6.34-gnu/arch/arm/kernel/bios32.c linux-libre-2.6.35-gnu/arch/arm/kernel/bios32.c
--- linux-libre-2.6.34-gnu/arch/arm/kernel/bios32.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/kernel/bios32.c	2010-08-01 18:11:14.000000000 -0400
@@ -527,6 +527,9 @@
 		if (!sys)
 			panic("PCI: unable to allocate sys data!");
 
+#ifdef CONFIG_PCI_DOMAINS
+		sys->domain  = hw->domain;
+#endif
 		sys->hw      = hw;
 		sys->busnr   = busnr;
 		sys->swizzle = hw->swizzle;
diff -druN linux-libre-2.6.34-gnu/arch/arm/kernel/dma.c linux-libre-2.6.35-gnu/arch/arm/kernel/dma.c
--- linux-libre-2.6.34-gnu/arch/arm/kernel/dma.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/kernel/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -16,6 +16,8 @@
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/scatterlist.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
 
 #include <asm/dma.h>
 
@@ -264,3 +266,37 @@
 	return ret;
 }
 EXPORT_SYMBOL(get_dma_residue);
+
+#ifdef CONFIG_PROC_FS
+static int proc_dma_show(struct seq_file *m, void *v)
+{
+	int i;
+
+	for (i = 0 ; i < MAX_DMA_CHANNELS ; i++) {
+		dma_t *dma = dma_channel(i);
+		if (dma && dma->lock)
+			seq_printf(m, "%2d: %s\n", i, dma->device_id);
+	}
+	return 0;
+}
+
+static int proc_dma_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, proc_dma_show, NULL);
+}
+
+static const struct file_operations proc_dma_operations = {
+	.open		= proc_dma_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_dma_init(void)
+{
+	proc_create("dma", 0, NULL, &proc_dma_operations);
+	return 0;
+}
+
+__initcall(proc_dma_init);
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/kernel/entry-armv.S linux-libre-2.6.35-gnu/arch/arm/kernel/entry-armv.S
--- linux-libre-2.6.34-gnu/arch/arm/kernel/entry-armv.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/kernel/entry-armv.S	2010-08-01 18:11:14.000000000 -0400
@@ -162,8 +162,6 @@
 	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
 	@
 	stmia	r5, {r0 - r4}
-
-	asm_trace_hardirqs_off
 	.endm
 
 	.align	5
@@ -204,7 +202,7 @@
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-	disable_irq
+	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -218,6 +216,9 @@
 __irq_svc:
 	svc_entry
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off
+#endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -291,7 +292,7 @@
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-1:	disable_irq
+1:	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -327,7 +328,7 @@
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-	disable_irq
+	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -393,8 +394,6 @@
 	@ Clear FP to mark the first stack frame
 	@
 	zero_fp
-
-	asm_trace_hardirqs_off
 	.endm
 
 	.macro	kuser_cmpxchg_check
@@ -465,9 +464,6 @@
  THUMB(	movne	r0, #0		)
  THUMB(	strne	r0, [r0]	)
 #endif
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_on
-#endif
 
 	mov	why, #0
 	b	ret_to_user
diff -druN linux-libre-2.6.34-gnu/arch/arm/kernel/kgdb.c linux-libre-2.6.35-gnu/arch/arm/kernel/kgdb.c
--- linux-libre-2.6.34-gnu/arch/arm/kernel/kgdb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/kernel/kgdb.c	2010-08-01 18:11:14.000000000 -0400
@@ -98,6 +98,11 @@
 	gdb_regs[_CPSR]		= thread_regs->ARM_cpsr;
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->ARM_pc = pc;
+}
+
 static int compiled_break;
 
 int kgdb_arch_handle_exception(int exception_vector, int signo,
diff -druN linux-libre-2.6.34-gnu/arch/arm/kernel/kprobes-decode.c linux-libre-2.6.35-gnu/arch/arm/kernel/kprobes-decode.c
--- linux-libre-2.6.34-gnu/arch/arm/kernel/kprobes-decode.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/kernel/kprobes-decode.c	2010-08-01 18:11:14.000000000 -0400
@@ -583,13 +583,14 @@
 {
 	insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0];
 	kprobe_opcode_t insn = p->opcode;
+	long ppc = (long)p->addr + 8;
 	union reg_pair fnr;
 	int rd = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
 	long rdv;
-	long rnv  = regs->uregs[rn];
-	long rmv  = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+	long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+	long rmv = (rm == 15) ? ppc : regs->uregs[rm];
 	long cpsr = regs->ARM_cpsr;
 
 	fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
diff -druN linux-libre-2.6.34-gnu/arch/arm/kernel/perf_event.c linux-libre-2.6.35-gnu/arch/arm/kernel/perf_event.c
--- linux-libre-2.6.34-gnu/arch/arm/kernel/perf_event.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/kernel/perf_event.c	2010-08-01 18:11:14.000000000 -0400
@@ -16,7 +16,9 @@
 
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/perf_event.h>
+#include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/uaccess.h>
 
@@ -26,7 +28,7 @@
 #include <asm/pmu.h>
 #include <asm/stacktrace.h>
 
-static const struct pmu_irqs *pmu_irqs;
+static struct platform_device *pmu_device;
 
 /*
  * Hardware lock to serialize accesses to PMU registers. Needed for the
@@ -67,8 +69,18 @@
 };
 DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
 
+/* PMU names. */
+static const char *arm_pmu_names[] = {
+	[ARM_PERF_PMU_ID_XSCALE1] = "xscale1",
+	[ARM_PERF_PMU_ID_XSCALE2] = "xscale2",
+	[ARM_PERF_PMU_ID_V6]	  = "v6",
+	[ARM_PERF_PMU_ID_V6MP]	  = "v6mpcore",
+	[ARM_PERF_PMU_ID_CA8]	  = "ARMv7 Cortex-A8",
+	[ARM_PERF_PMU_ID_CA9]	  = "ARMv7 Cortex-A9",
+};
+
 struct arm_pmu {
-	char		*name;
+	enum arm_perf_pmu_ids id;
 	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
 	void		(*enable)(struct hw_perf_event *evt, int idx);
 	void		(*disable)(struct hw_perf_event *evt, int idx);
@@ -87,6 +99,30 @@
 /* Set at runtime when we know what CPU type we are. */
 static const struct arm_pmu *armpmu;
 
+enum arm_perf_pmu_ids
+armpmu_get_pmu_id(void)
+{
+	int id = -ENODEV;
+
+	if (armpmu != NULL)
+		id = armpmu->id;
+
+	return id;
+}
+EXPORT_SYMBOL_GPL(armpmu_get_pmu_id);
+
+int
+armpmu_get_max_events(void)
+{
+	int max_events = 0;
+
+	if (armpmu != NULL)
+		max_events = armpmu->num_events;
+
+	return max_events;
+}
+EXPORT_SYMBOL_GPL(armpmu_get_max_events);
+
 #define HW_OP_UNSUPPORTED		0xFFFF
 
 #define C(_x) \
@@ -165,7 +201,7 @@
 {
 	int shift = 64 - 32;
 	s64 prev_raw_count, new_raw_count;
-	s64 delta;
+	u64 delta;
 
 again:
 	prev_raw_count = atomic64_read(&hwc->prev_count);
@@ -314,38 +350,44 @@
 static int
 armpmu_reserve_hardware(void)
 {
-	int i;
-	int err;
+	int i, err = -ENODEV, irq;
 
-	pmu_irqs = reserve_pmu();
-	if (IS_ERR(pmu_irqs)) {
+	pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU);
+	if (IS_ERR(pmu_device)) {
 		pr_warning("unable to reserve pmu\n");
-		return PTR_ERR(pmu_irqs);
+		return PTR_ERR(pmu_device);
 	}
 
-	init_pmu();
+	init_pmu(ARM_PMU_DEVICE_CPU);
 
-	if (pmu_irqs->num_irqs < 1) {
+	if (pmu_device->num_resources < 1) {
 		pr_err("no irqs for PMUs defined\n");
 		return -ENODEV;
 	}
 
-	for (i = 0; i < pmu_irqs->num_irqs; ++i) {
-		err = request_irq(pmu_irqs->irqs[i], armpmu->handle_irq,
+	for (i = 0; i < pmu_device->num_resources; ++i) {
+		irq = platform_get_irq(pmu_device, i);
+		if (irq < 0)
+			continue;
+
+		err = request_irq(irq, armpmu->handle_irq,
 				  IRQF_DISABLED | IRQF_NOBALANCING,
 				  "armpmu", NULL);
 		if (err) {
-			pr_warning("unable to request IRQ%d for ARM "
-				   "perf counters\n", pmu_irqs->irqs[i]);
+			pr_warning("unable to request IRQ%d for ARM perf "
+				"counters\n", irq);
 			break;
 		}
 	}
 
 	if (err) {
-		for (i = i - 1; i >= 0; --i)
-			free_irq(pmu_irqs->irqs[i], NULL);
-		release_pmu(pmu_irqs);
-		pmu_irqs = NULL;
+		for (i = i - 1; i >= 0; --i) {
+			irq = platform_get_irq(pmu_device, i);
+			if (irq >= 0)
+				free_irq(irq, NULL);
+		}
+		release_pmu(pmu_device);
+		pmu_device = NULL;
 	}
 
 	return err;
@@ -354,14 +396,17 @@
 static void
 armpmu_release_hardware(void)
 {
-	int i;
+	int i, irq;
 
-	for (i = pmu_irqs->num_irqs - 1; i >= 0; --i)
-		free_irq(pmu_irqs->irqs[i], NULL);
+	for (i = pmu_device->num_resources - 1; i >= 0; --i) {
+		irq = platform_get_irq(pmu_device, i);
+		if (irq >= 0)
+			free_irq(irq, NULL);
+	}
 	armpmu->stop();
 
-	release_pmu(pmu_irqs);
-	pmu_irqs = NULL;
+	release_pmu(pmu_device);
+	pmu_device = NULL;
 }
 
 static atomic_t active_events = ATOMIC_INIT(0);
@@ -1144,7 +1189,7 @@
 }
 
 static const struct arm_pmu armv6pmu = {
-	.name			= "v6",
+	.id			= ARM_PERF_PMU_ID_V6,
 	.handle_irq		= armv6pmu_handle_irq,
 	.enable			= armv6pmu_enable_event,
 	.disable		= armv6pmu_disable_event,
@@ -1167,7 +1212,7 @@
  * reset the period and enable the interrupt reporting.
  */
 static const struct arm_pmu armv6mpcore_pmu = {
-	.name			= "v6mpcore",
+	.id			= ARM_PERF_PMU_ID_V6MP,
 	.handle_irq		= armv6pmu_handle_irq,
 	.enable			= armv6pmu_enable_event,
 	.disable		= armv6mpcore_pmu_disable_event,
@@ -1197,10 +1242,6 @@
  *  counter and all 4 performance counters together can be reset separately.
  */
 
-#define ARMV7_PMU_CORTEX_A8_NAME		"ARMv7 Cortex-A8"
-
-#define ARMV7_PMU_CORTEX_A9_NAME		"ARMv7 Cortex-A9"
-
 /* Common ARMv7 event types */
 enum armv7_perf_types {
 	ARMV7_PERFCTR_PMNC_SW_INCR		= 0x00,
@@ -2079,6 +2120,803 @@
 	return nb_cnt + 1;
 }
 
+/*
+ * ARMv5 [xscale] Performance counter handling code.
+ *
+ * Based on xscale OProfile code.
+ *
+ * There are two variants of the xscale PMU that we support:
+ * 	- xscale1pmu: 2 event counters and a cycle counter
+ * 	- xscale2pmu: 4 event counters and a cycle counter
+ * The two variants share event definitions, but have different
+ * PMU structures.
+ */
+
+enum xscale_perf_types {
+	XSCALE_PERFCTR_ICACHE_MISS		= 0x00,
+	XSCALE_PERFCTR_ICACHE_NO_DELIVER	= 0x01,
+	XSCALE_PERFCTR_DATA_STALL		= 0x02,
+	XSCALE_PERFCTR_ITLB_MISS		= 0x03,
+	XSCALE_PERFCTR_DTLB_MISS		= 0x04,
+	XSCALE_PERFCTR_BRANCH			= 0x05,
+	XSCALE_PERFCTR_BRANCH_MISS		= 0x06,
+	XSCALE_PERFCTR_INSTRUCTION		= 0x07,
+	XSCALE_PERFCTR_DCACHE_FULL_STALL	= 0x08,
+	XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG	= 0x09,
+	XSCALE_PERFCTR_DCACHE_ACCESS		= 0x0A,
+	XSCALE_PERFCTR_DCACHE_MISS		= 0x0B,
+	XSCALE_PERFCTR_DCACHE_WRITE_BACK	= 0x0C,
+	XSCALE_PERFCTR_PC_CHANGED		= 0x0D,
+	XSCALE_PERFCTR_BCU_REQUEST		= 0x10,
+	XSCALE_PERFCTR_BCU_FULL			= 0x11,
+	XSCALE_PERFCTR_BCU_DRAIN		= 0x12,
+	XSCALE_PERFCTR_BCU_ECC_NO_ELOG		= 0x14,
+	XSCALE_PERFCTR_BCU_1_BIT_ERR		= 0x15,
+	XSCALE_PERFCTR_RMW			= 0x16,
+	/* XSCALE_PERFCTR_CCNT is not hardware defined */
+	XSCALE_PERFCTR_CCNT			= 0xFE,
+	XSCALE_PERFCTR_UNUSED			= 0xFF,
+};
+
+enum xscale_counters {
+	XSCALE_CYCLE_COUNTER	= 1,
+	XSCALE_COUNTER0,
+	XSCALE_COUNTER1,
+	XSCALE_COUNTER2,
+	XSCALE_COUNTER3,
+};
+
+static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = XSCALE_PERFCTR_CCNT,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = XSCALE_PERFCTR_INSTRUCTION,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = XSCALE_PERFCTR_BRANCH_MISS,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					   [PERF_COUNT_HW_CACHE_OP_MAX]
+					   [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+#define	XSCALE_PMU_ENABLE	0x001
+#define XSCALE_PMN_RESET	0x002
+#define	XSCALE_CCNT_RESET	0x004
+#define	XSCALE_PMU_RESET	(CCNT_RESET | PMN_RESET)
+#define XSCALE_PMU_CNT64	0x008
+
+static inline int
+xscalepmu_event_map(int config)
+{
+	int mapping = xscale_perf_map[config];
+	if (HW_OP_UNSUPPORTED == mapping)
+		mapping = -EOPNOTSUPP;
+	return mapping;
+}
+
+static u64
+xscalepmu_raw_event(u64 config)
+{
+	return config & 0xff;
+}
+
+#define XSCALE1_OVERFLOWED_MASK	0x700
+#define XSCALE1_CCOUNT_OVERFLOW	0x400
+#define XSCALE1_COUNT0_OVERFLOW	0x100
+#define XSCALE1_COUNT1_OVERFLOW	0x200
+#define XSCALE1_CCOUNT_INT_EN	0x040
+#define XSCALE1_COUNT0_INT_EN	0x010
+#define XSCALE1_COUNT1_INT_EN	0x020
+#define XSCALE1_COUNT0_EVT_SHFT	12
+#define XSCALE1_COUNT0_EVT_MASK	(0xff << XSCALE1_COUNT0_EVT_SHFT)
+#define XSCALE1_COUNT1_EVT_SHFT	20
+#define XSCALE1_COUNT1_EVT_MASK	(0xff << XSCALE1_COUNT1_EVT_SHFT)
+
+static inline u32
+xscale1pmu_read_pmnc(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
+	return val;
+}
+
+static inline void
+xscale1pmu_write_pmnc(u32 val)
+{
+	/* upper 4bits and 7, 11 are write-as-0 */
+	val &= 0xffff77f;
+	asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
+}
+
+static inline int
+xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
+					enum xscale_counters counter)
+{
+	int ret = 0;
+
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
+		break;
+	case XSCALE_COUNTER0:
+		ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
+		break;
+	case XSCALE_COUNTER1:
+		ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+	}
+
+	return ret;
+}
+
+static irqreturn_t
+xscale1pmu_handle_irq(int irq_num, void *dev)
+{
+	unsigned long pmnc;
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	/*
+	 * NOTE: there's an A stepping erratum that states if an overflow
+	 *       bit already exists and another occurs, the previous
+	 *       Overflow bit gets cleared. There's no workaround.
+	 *	 Fixed in B stepping or later.
+	 */
+	pmnc = xscale1pmu_read_pmnc();
+
+	/*
+	 * Write the value back to clear the overflow flags. Overflow
+	 * flags remain in pmnc for use below. We also disable the PMU
+	 * while we process the interrupt.
+	 */
+	xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
+
+	if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
+		return IRQ_NONE;
+
+	regs = get_irq_regs();
+
+	perf_sample_data_init(&data, 0);
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 0, &data, regs))
+			armpmu->disable(hwc, idx);
+	}
+
+	perf_event_do_pending();
+
+	/*
+	 * Re-enable the PMU.
+	 */
+	pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
+	xscale1pmu_write_pmnc(pmnc);
+
+	return IRQ_HANDLED;
+}
+
+static void
+xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long val, mask, evt, flags;
+
+	switch (idx) {
+	case XSCALE_CYCLE_COUNTER:
+		mask = 0;
+		evt = XSCALE1_CCOUNT_INT_EN;
+		break;
+	case XSCALE_COUNTER0:
+		mask = XSCALE1_COUNT0_EVT_MASK;
+		evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
+			XSCALE1_COUNT0_INT_EN;
+		break;
+	case XSCALE_COUNTER1:
+		mask = XSCALE1_COUNT1_EVT_MASK;
+		evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
+			XSCALE1_COUNT1_INT_EN;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale1pmu_read_pmnc();
+	val &= ~mask;
+	val |= evt;
+	xscale1pmu_write_pmnc(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long val, mask, evt, flags;
+
+	switch (idx) {
+	case XSCALE_CYCLE_COUNTER:
+		mask = XSCALE1_CCOUNT_INT_EN;
+		evt = 0;
+		break;
+	case XSCALE_COUNTER0:
+		mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
+		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER1:
+		mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
+		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale1pmu_read_pmnc();
+	val &= ~mask;
+	val |= evt;
+	xscale1pmu_write_pmnc(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
+			struct hw_perf_event *event)
+{
+	if (XSCALE_PERFCTR_CCNT == event->config_base) {
+		if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
+			return -EAGAIN;
+
+		return XSCALE_CYCLE_COUNTER;
+	} else {
+		if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) {
+			return XSCALE_COUNTER1;
+		}
+
+		if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) {
+			return XSCALE_COUNTER0;
+		}
+
+		return -EAGAIN;
+	}
+}
+
+static void
+xscale1pmu_start(void)
+{
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale1pmu_read_pmnc();
+	val |= XSCALE_PMU_ENABLE;
+	xscale1pmu_write_pmnc(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale1pmu_stop(void)
+{
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale1pmu_read_pmnc();
+	val &= ~XSCALE_PMU_ENABLE;
+	xscale1pmu_write_pmnc(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline u32
+xscale1pmu_read_counter(int counter)
+{
+	u32 val = 0;
+
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER0:
+		asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER1:
+		asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
+		break;
+	}
+
+	return val;
+}
+
+static inline void
+xscale1pmu_write_counter(int counter, u32 val)
+{
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER0:
+		asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER1:
+		asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
+		break;
+	}
+}
+
+static const struct arm_pmu xscale1pmu = {
+	.id		= ARM_PERF_PMU_ID_XSCALE1,
+	.handle_irq	= xscale1pmu_handle_irq,
+	.enable		= xscale1pmu_enable_event,
+	.disable	= xscale1pmu_disable_event,
+	.event_map	= xscalepmu_event_map,
+	.raw_event	= xscalepmu_raw_event,
+	.read_counter	= xscale1pmu_read_counter,
+	.write_counter	= xscale1pmu_write_counter,
+	.get_event_idx	= xscale1pmu_get_event_idx,
+	.start		= xscale1pmu_start,
+	.stop		= xscale1pmu_stop,
+	.num_events	= 3,
+	.max_period	= (1LLU << 32) - 1,
+};
+
+#define XSCALE2_OVERFLOWED_MASK	0x01f
+#define XSCALE2_CCOUNT_OVERFLOW	0x001
+#define XSCALE2_COUNT0_OVERFLOW	0x002
+#define XSCALE2_COUNT1_OVERFLOW	0x004
+#define XSCALE2_COUNT2_OVERFLOW	0x008
+#define XSCALE2_COUNT3_OVERFLOW	0x010
+#define XSCALE2_CCOUNT_INT_EN	0x001
+#define XSCALE2_COUNT0_INT_EN	0x002
+#define XSCALE2_COUNT1_INT_EN	0x004
+#define XSCALE2_COUNT2_INT_EN	0x008
+#define XSCALE2_COUNT3_INT_EN	0x010
+#define XSCALE2_COUNT0_EVT_SHFT	0
+#define XSCALE2_COUNT0_EVT_MASK	(0xff << XSCALE2_COUNT0_EVT_SHFT)
+#define XSCALE2_COUNT1_EVT_SHFT	8
+#define XSCALE2_COUNT1_EVT_MASK	(0xff << XSCALE2_COUNT1_EVT_SHFT)
+#define XSCALE2_COUNT2_EVT_SHFT	16
+#define XSCALE2_COUNT2_EVT_MASK	(0xff << XSCALE2_COUNT2_EVT_SHFT)
+#define XSCALE2_COUNT3_EVT_SHFT	24
+#define XSCALE2_COUNT3_EVT_MASK	(0xff << XSCALE2_COUNT3_EVT_SHFT)
+
+static inline u32
+xscale2pmu_read_pmnc(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
+	/* bits 1-2 and 4-23 are read-unpredictable */
+	return val & 0xff000009;
+}
+
+static inline void
+xscale2pmu_write_pmnc(u32 val)
+{
+	/* bits 4-23 are write-as-0, 24-31 are write ignored */
+	val &= 0xf;
+	asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
+}
+
+static inline u32
+xscale2pmu_read_overflow_flags(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
+	return val;
+}
+
+static inline void
+xscale2pmu_write_overflow_flags(u32 val)
+{
+	asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
+}
+
+static inline u32
+xscale2pmu_read_event_select(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
+	return val;
+}
+
+static inline void
+xscale2pmu_write_event_select(u32 val)
+{
+	asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
+}
+
+static inline u32
+xscale2pmu_read_int_enable(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
+	return val;
+}
+
+static void
+xscale2pmu_write_int_enable(u32 val)
+{
+	asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
+}
+
+static inline int
+xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
+					enum xscale_counters counter)
+{
+	int ret = 0;
+
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
+		break;
+	case XSCALE_COUNTER0:
+		ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
+		break;
+	case XSCALE_COUNTER1:
+		ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
+		break;
+	case XSCALE_COUNTER2:
+		ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
+		break;
+	case XSCALE_COUNTER3:
+		ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+	}
+
+	return ret;
+}
+
+static irqreturn_t
+xscale2pmu_handle_irq(int irq_num, void *dev)
+{
+	unsigned long pmnc, of_flags;
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	/* Disable the PMU. */
+	pmnc = xscale2pmu_read_pmnc();
+	xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
+
+	/* Check the overflow flag register. */
+	of_flags = xscale2pmu_read_overflow_flags();
+	if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
+		return IRQ_NONE;
+
+	/* Clear the overflow bits. */
+	xscale2pmu_write_overflow_flags(of_flags);
+
+	regs = get_irq_regs();
+
+	perf_sample_data_init(&data, 0);
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 0, &data, regs))
+			armpmu->disable(hwc, idx);
+	}
+
+	perf_event_do_pending();
+
+	/*
+	 * Re-enable the PMU.
+	 */
+	pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
+	xscale2pmu_write_pmnc(pmnc);
+
+	return IRQ_HANDLED;
+}
+
+static void
+xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags, ien, evtsel;
+
+	ien = xscale2pmu_read_int_enable();
+	evtsel = xscale2pmu_read_event_select();
+
+	switch (idx) {
+	case XSCALE_CYCLE_COUNTER:
+		ien |= XSCALE2_CCOUNT_INT_EN;
+		break;
+	case XSCALE_COUNTER0:
+		ien |= XSCALE2_COUNT0_INT_EN;
+		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
+		evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER1:
+		ien |= XSCALE2_COUNT1_INT_EN;
+		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
+		evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER2:
+		ien |= XSCALE2_COUNT2_INT_EN;
+		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
+		evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER3:
+		ien |= XSCALE2_COUNT3_INT_EN;
+		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
+		evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	xscale2pmu_write_event_select(evtsel);
+	xscale2pmu_write_int_enable(ien);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags, ien, evtsel;
+
+	ien = xscale2pmu_read_int_enable();
+	evtsel = xscale2pmu_read_event_select();
+
+	switch (idx) {
+	case XSCALE_CYCLE_COUNTER:
+		ien &= ~XSCALE2_CCOUNT_INT_EN;
+		break;
+	case XSCALE_COUNTER0:
+		ien &= ~XSCALE2_COUNT0_INT_EN;
+		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
+		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER1:
+		ien &= ~XSCALE2_COUNT1_INT_EN;
+		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
+		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER2:
+		ien &= ~XSCALE2_COUNT2_INT_EN;
+		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
+		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER3:
+		ien &= ~XSCALE2_COUNT3_INT_EN;
+		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
+		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	xscale2pmu_write_event_select(evtsel);
+	xscale2pmu_write_int_enable(ien);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
+			struct hw_perf_event *event)
+{
+	int idx = xscale1pmu_get_event_idx(cpuc, event);
+	if (idx >= 0)
+		goto out;
+
+	if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
+		idx = XSCALE_COUNTER3;
+	else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
+		idx = XSCALE_COUNTER2;
+out:
+	return idx;
+}
+
+static void
+xscale2pmu_start(void)
+{
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
+	val |= XSCALE_PMU_ENABLE;
+	xscale2pmu_write_pmnc(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale2pmu_stop(void)
+{
+	unsigned long flags, val;
+
+	spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale2pmu_read_pmnc();
+	val &= ~XSCALE_PMU_ENABLE;
+	xscale2pmu_write_pmnc(val);
+	spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline u32
+xscale2pmu_read_counter(int counter)
+{
+	u32 val = 0;
+
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER0:
+		asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER1:
+		asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER2:
+		asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER3:
+		asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
+		break;
+	}
+
+	return val;
+}
+
+static inline void
+xscale2pmu_write_counter(int counter, u32 val)
+{
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER0:
+		asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER1:
+		asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER2:
+		asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER3:
+		asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
+		break;
+	}
+}
+
+static const struct arm_pmu xscale2pmu = {
+	.id		= ARM_PERF_PMU_ID_XSCALE2,
+	.handle_irq	= xscale2pmu_handle_irq,
+	.enable		= xscale2pmu_enable_event,
+	.disable	= xscale2pmu_disable_event,
+	.event_map	= xscalepmu_event_map,
+	.raw_event	= xscalepmu_raw_event,
+	.read_counter	= xscale2pmu_read_counter,
+	.write_counter	= xscale2pmu_write_counter,
+	.get_event_idx	= xscale2pmu_get_event_idx,
+	.start		= xscale2pmu_start,
+	.stop		= xscale2pmu_stop,
+	.num_events	= 5,
+	.max_period	= (1LLU << 32) - 1,
+};
+
 static int __init
 init_hw_perf_events(void)
 {
@@ -2086,7 +2924,7 @@
 	unsigned long implementor = (cpuid & 0xFF000000) >> 24;
 	unsigned long part_number = (cpuid & 0xFFF0);
 
-	/* We only support ARM CPUs implemented by ARM at the moment. */
+	/* ARM Ltd CPUs. */
 	if (0x41 == implementor) {
 		switch (part_number) {
 		case 0xB360:	/* ARM1136 */
@@ -2105,7 +2943,7 @@
 			perf_max_events = armv6mpcore_pmu.num_events;
 			break;
 		case 0xC080:	/* Cortex-A8 */
-			armv7pmu.name = ARMV7_PMU_CORTEX_A8_NAME;
+			armv7pmu.id = ARM_PERF_PMU_ID_CA8;
 			memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map,
 				sizeof(armv7_a8_perf_cache_map));
 			armv7pmu.event_map = armv7_a8_pmu_event_map;
@@ -2117,7 +2955,7 @@
 			perf_max_events = armv7pmu.num_events;
 			break;
 		case 0xC090:	/* Cortex-A9 */
-			armv7pmu.name = ARMV7_PMU_CORTEX_A9_NAME;
+			armv7pmu.id = ARM_PERF_PMU_ID_CA9;
 			memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map,
 				sizeof(armv7_a9_perf_cache_map));
 			armv7pmu.event_map = armv7_a9_pmu_event_map;
@@ -2128,15 +2966,33 @@
 			armv7pmu.num_events = armv7_reset_read_pmnc();
 			perf_max_events = armv7pmu.num_events;
 			break;
-		default:
-			pr_info("no hardware support available\n");
-			perf_max_events = -1;
+		}
+	/* Intel CPUs [xscale]. */
+	} else if (0x69 == implementor) {
+		part_number = (cpuid >> 13) & 0x7;
+		switch (part_number) {
+		case 1:
+			armpmu = &xscale1pmu;
+			memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
+					sizeof(xscale_perf_cache_map));
+			perf_max_events	= xscale1pmu.num_events;
+			break;
+		case 2:
+			armpmu = &xscale2pmu;
+			memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
+					sizeof(xscale_perf_cache_map));
+			perf_max_events	= xscale2pmu.num_events;
+			break;
 		}
 	}
 
-	if (armpmu)
+	if (armpmu) {
 		pr_info("enabled with %s PMU driver, %d counters available\n",
-			armpmu->name, armpmu->num_events);
+				arm_pmu_names[armpmu->id], armpmu->num_events);
+	} else {
+		pr_info("no hardware support available\n");
+		perf_max_events = -1;
+	}
 
 	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/kernel/pmu.c linux-libre-2.6.35-gnu/arch/arm/kernel/pmu.c
--- linux-libre-2.6.34-gnu/arch/arm/kernel/pmu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/kernel/pmu.c	2010-08-01 18:11:14.000000000 -0400
@@ -2,6 +2,7 @@
  *  linux/arch/arm/kernel/pmu.c
  *
  *  Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
+ *  Copyright (C) 2010 ARM Ltd, Will Deacon
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -9,65 +10,78 @@
  *
  */
 
+#define pr_fmt(fmt) "PMU: " fmt
+
 #include <linux/cpumask.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
 
 #include <asm/pmu.h>
 
-/*
- * Define the IRQs for the system. We could use something like a platform
- * device but that seems fairly heavyweight for this. Also, the performance
- * counters can't be removed or hotplugged.
- *
- * Ordering is important: init_pmu() will use the ordering to set the affinity
- * to the corresponding core. e.g. the first interrupt will go to cpu 0, the
- * second goes to cpu 1 etc.
- */
-static const int irqs[] = {
-#if defined(CONFIG_ARCH_OMAP2)
-	3,
-#elif defined(CONFIG_ARCH_BCMRING)
-	IRQ_PMUIRQ,
-#elif defined(CONFIG_MACH_REALVIEW_EB)
-	IRQ_EB11MP_PMU_CPU0,
-	IRQ_EB11MP_PMU_CPU1,
-	IRQ_EB11MP_PMU_CPU2,
-	IRQ_EB11MP_PMU_CPU3,
-#elif defined(CONFIG_ARCH_OMAP3)
-	INT_34XX_BENCH_MPU_EMUL,
-#elif defined(CONFIG_ARCH_IOP32X)
-	IRQ_IOP32X_CORE_PMU,
-#elif defined(CONFIG_ARCH_IOP33X)
-	IRQ_IOP33X_CORE_PMU,
-#elif defined(CONFIG_ARCH_PXA)
-	IRQ_PMU,
-#endif
-};
+static volatile long pmu_lock;
 
-static const struct pmu_irqs pmu_irqs = {
-	.irqs	    = irqs,
-	.num_irqs   = ARRAY_SIZE(irqs),
+static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES];
+
+static int __devinit pmu_device_probe(struct platform_device *pdev)
+{
+
+	if (pdev->id < 0 || pdev->id >= ARM_NUM_PMU_DEVICES) {
+		pr_warning("received registration request for unknown "
+				"device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	if (pmu_devices[pdev->id])
+		pr_warning("registering new PMU device type %d overwrites "
+				"previous registration!\n", pdev->id);
+	else
+		pr_info("registered new PMU device of type %d\n",
+				pdev->id);
+
+	pmu_devices[pdev->id] = pdev;
+	return 0;
+}
+
+static struct platform_driver pmu_driver = {
+	.driver		= {
+		.name	= "arm-pmu",
+	},
+	.probe		= pmu_device_probe,
 };
 
-static volatile long pmu_lock;
+static int __init register_pmu_driver(void)
+{
+	return platform_driver_register(&pmu_driver);
+}
+device_initcall(register_pmu_driver);
 
-const struct pmu_irqs *
-reserve_pmu(void)
+struct platform_device *
+reserve_pmu(enum arm_pmu_type device)
 {
-	return test_and_set_bit_lock(0, &pmu_lock) ? ERR_PTR(-EBUSY) :
-		&pmu_irqs;
+	struct platform_device *pdev;
+
+	if (test_and_set_bit_lock(device, &pmu_lock)) {
+		pdev = ERR_PTR(-EBUSY);
+	} else if (pmu_devices[device] == NULL) {
+		clear_bit_unlock(device, &pmu_lock);
+		pdev = ERR_PTR(-ENODEV);
+	} else {
+		pdev = pmu_devices[device];
+	}
+
+	return pdev;
 }
 EXPORT_SYMBOL_GPL(reserve_pmu);
 
 int
-release_pmu(const struct pmu_irqs *irqs)
+release_pmu(struct platform_device *pdev)
 {
-	if (WARN_ON(irqs != &pmu_irqs))
+	if (WARN_ON(pdev != pmu_devices[pdev->id]))
 		return -EINVAL;
-	clear_bit_unlock(0, &pmu_lock);
+	clear_bit_unlock(pdev->id, &pmu_lock);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(release_pmu);
@@ -87,17 +101,42 @@
 #endif
 }
 
-int
-init_pmu(void)
+static int
+init_cpu_pmu(void)
 {
 	int i, err = 0;
+	struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU];
 
-	for (i = 0; i < pmu_irqs.num_irqs; ++i) {
-		err = set_irq_affinity(pmu_irqs.irqs[i], i);
+	if (!pdev) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	for (i = 0; i < pdev->num_resources; ++i) {
+		err = set_irq_affinity(platform_get_irq(pdev, i), i);
 		if (err)
 			break;
 	}
 
+out:
+	return err;
+}
+
+int
+init_pmu(enum arm_pmu_type device)
+{
+	int err = 0;
+
+	switch (device) {
+	case ARM_PMU_DEVICE_CPU:
+		err = init_cpu_pmu();
+		break;
+	default:
+		pr_warning("attempt to initialise unknown device %d\n",
+				device);
+		err = -EINVAL;
+	}
+
 	return err;
 }
 EXPORT_SYMBOL_GPL(init_pmu);
diff -druN linux-libre-2.6.34-gnu/arch/arm/kernel/process.c linux-libre-2.6.35-gnu/arch/arm/kernel/process.c
--- linux-libre-2.6.34-gnu/arch/arm/kernel/process.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/kernel/process.c	2010-08-01 18:11:14.000000000 -0400
@@ -351,17 +351,21 @@
 
 /*
  * Shuffle the argument into the correct register before calling the
- * thread function.  r1 is the thread argument, r2 is the pointer to
- * the thread function, and r3 points to the exit function.
+ * thread function.  r4 is the thread argument, r5 is the pointer to
+ * the thread function, and r6 points to the exit function.
  */
 extern void kernel_thread_helper(void);
 asm(	".pushsection .text\n"
 "	.align\n"
 "	.type	kernel_thread_helper, #function\n"
 "kernel_thread_helper:\n"
-"	mov	r0, r1\n"
-"	mov	lr, r3\n"
-"	mov	pc, r2\n"
+#ifdef CONFIG_TRACE_IRQFLAGS
+"	bl	trace_hardirqs_on\n"
+#endif
+"	msr	cpsr_c, r7\n"
+"	mov	r0, r4\n"
+"	mov	lr, r6\n"
+"	mov	pc, r5\n"
 "	.size	kernel_thread_helper, . - kernel_thread_helper\n"
 "	.popsection");
 
@@ -391,11 +395,12 @@
 
 	memset(&regs, 0, sizeof(regs));
 
-	regs.ARM_r1 = (unsigned long)arg;
-	regs.ARM_r2 = (unsigned long)fn;
-	regs.ARM_r3 = (unsigned long)kernel_thread_exit;
+	regs.ARM_r4 = (unsigned long)arg;
+	regs.ARM_r5 = (unsigned long)fn;
+	regs.ARM_r6 = (unsigned long)kernel_thread_exit;
+	regs.ARM_r7 = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
+	regs.ARM_cpsr = regs.ARM_r7 | PSR_I_BIT;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/kernel/setup.c linux-libre-2.6.35-gnu/arch/arm/kernel/setup.c
--- linux-libre-2.6.34-gnu/arch/arm/kernel/setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/kernel/setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -593,6 +593,7 @@
 
 __tagtable(ATAG_REVISION, parse_tag_revision);
 
+#ifndef CONFIG_CMDLINE_FORCE
 static int __init parse_tag_cmdline(const struct tag *tag)
 {
 	strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
@@ -600,6 +601,7 @@
 }
 
 __tagtable(ATAG_CMDLINE, parse_tag_cmdline);
+#endif /* CONFIG_CMDLINE_FORCE */
 
 /*
  * Scan the tag table for this tag, and call its parse function.
diff -druN linux-libre-2.6.34-gnu/arch/arm/kernel/smp.c linux-libre-2.6.35-gnu/arch/arm/kernel/smp.c
--- linux-libre-2.6.34-gnu/arch/arm/kernel/smp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/kernel/smp.c	2010-08-01 18:11:14.000000000 -0400
@@ -168,7 +168,7 @@
 	struct task_struct *p;
 	int ret;
 
-	ret = mach_cpu_disable(cpu);
+	ret = platform_cpu_disable(cpu);
 	if (ret)
 		return ret;
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/kernel/time.c linux-libre-2.6.35-gnu/arch/arm/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/arm/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -72,12 +72,15 @@
 EXPORT_SYMBOL(profile_pc);
 #endif
 
-#ifndef CONFIG_GENERIC_TIME
-static unsigned long dummy_gettimeoffset(void)
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+u32 arch_gettimeoffset(void)
 {
+	if (system_timer->offset != NULL)
+		return system_timer->offset() * 1000;
+
 	return 0;
 }
-#endif
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
 
 #ifdef CONFIG_LEDS_TIMER
 static inline void do_leds(void)
@@ -93,63 +96,6 @@
 #define	do_leds()
 #endif
 
-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned long usec, sec;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		usec = system_timer->offset();
-		sec = xtime.tv_sec;
-		usec += xtime.tv_nsec / 1000;
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	/* usec may have gone up a lot: be safe */
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * done, and then undo it!
-	 */
-	nsec -= system_timer->offset() * NSEC_PER_USEC;
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */
 
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
@@ -214,10 +160,6 @@
 
 void __init time_init(void)
 {
-#ifndef CONFIG_GENERIC_TIME
-	if (system_timer->offset == NULL)
-		system_timer->offset = dummy_gettimeoffset;
-#endif
 	system_timer->init();
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/kernel/unwind.c linux-libre-2.6.35-gnu/arch/arm/kernel/unwind.c
--- linux-libre-2.6.34-gnu/arch/arm/kernel/unwind.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/kernel/unwind.c	2010-08-01 18:11:14.000000000 -0400
@@ -26,6 +26,7 @@
  * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
  */
 
+#ifndef __CHECKER__
 #if !defined (__ARM_EABI__)
 #warning Your compiler does not have EABI support.
 #warning    ARM unwind is known to compile only with EABI compilers.
@@ -34,6 +35,7 @@
 #warning Your compiler is too buggy; it is known to not compile ARM unwind support.
 #warning    Change compiler or disable ARM_UNWIND option.
 #endif
+#endif /* __CHECKER__ */
 
 #include <linux/kernel.h>
 #include <linux/init.h>
diff -druN linux-libre-2.6.34-gnu/arch/arm/lib/csumpartialcopyuser.S linux-libre-2.6.35-gnu/arch/arm/lib/csumpartialcopyuser.S
--- linux-libre-2.6.34-gnu/arch/arm/lib/csumpartialcopyuser.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/lib/csumpartialcopyuser.S	2010-08-01 18:11:14.000000000 -0400
@@ -71,7 +71,7 @@
 		.pushsection .fixup,"ax"
 		.align	4
 9001:		mov	r4, #-EFAULT
-		ldr	r5, [fp, #4]		@ *err_ptr
+		ldr	r5, [sp, #8*4]		@ *err_ptr
 		str	r4, [r5]
 		ldmia	sp, {r1, r2}		@ retrieve dst, len
 		add	r2, r2, r1
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-at91/board-sam9m10g45ek.c linux-libre-2.6.35-gnu/arch/arm/mach-at91/board-sam9m10g45ek.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-at91/board-sam9m10g45ek.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-at91/board-sam9m10g45ek.c	2010-08-01 18:11:14.000000000 -0400
@@ -25,7 +25,6 @@
 #include <linux/leds.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <video/atmel_lcdc.h>
 
 #include <asm/setup.h>
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-at91/board-stamp9g20.c linux-libre-2.6.35-gnu/arch/arm/mach-at91/board-stamp9g20.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-at91/board-stamp9g20.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-at91/board-stamp9g20.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,315 @@
+/*
+ *  Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
+ *                     taskit GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/w1-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init portuxg20_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+						| ATMEL_UART_DTR | ATMEL_UART_DSR
+						| ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART4 on ttyS5. (Rx, Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+	/* USART5 on ttyS6. (Rx, Tx only) */
+	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init stamp9g20_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+						| ATMEL_UART_DTR | ATMEL_UART_DSR
+						| ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * NAND flash
+ */
+static struct atmel_nand_data __initdata nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.bus_width_16	= 0,
+};
+
+static struct sam9_smc_config __initdata nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 3,
+};
+
+static void __init add_device_nand(void)
+{
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &nand_smc_config);
+
+	at91_add_device_nand(&nand_data);
+}
+
+
+/*
+ * MCI (SD/MMC)
+ * det_pin, wp_pin and vcc_pin are not connected
+ */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static struct mci_platform_data __initdata mmc_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+	},
+};
+#else
+static struct at91_mmc_data __initdata mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+};
+#endif
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata usbh_data = {
+	.ports		= 2,
+};
+
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata portuxg20_udc_data = {
+	.vbus_pin	= AT91_PIN_PC7,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+static struct at91_udc_data __initdata stamp9g20_udc_data = {
+	.vbus_pin	= AT91_PIN_PA22,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata macb_data = {
+	.phy_irq_pin	= AT91_PIN_PA28,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * LEDs
+ */
+static struct gpio_led portuxg20_leds[] = {
+	{
+		.name			= "LED2",
+		.gpio			= AT91_PIN_PC5,
+		.default_trigger	= "none",
+	}, {
+		.name			= "LED3",
+		.gpio			= AT91_PIN_PC4,
+		.default_trigger	= "none",
+	}, {
+		.name			= "LED4",
+		.gpio			= AT91_PIN_PC10,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+static struct gpio_led stamp9g20_leds[] = {
+	{
+		.name			= "D8",
+		.gpio			= AT91_PIN_PB18,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	}, {
+		.name			= "D9",
+		.gpio			= AT91_PIN_PB19,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	}, {
+		.name			= "D10",
+		.gpio			= AT91_PIN_PB20,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info portuxg20_spi_devices[] = {
+	{
+		.modalias	= "spidev",
+		.chip_select	= 0,
+		.max_speed_hz	= 1 * 1000 * 1000,
+		.bus_num	= 0,
+	}, {
+		.modalias	= "spidev",
+		.chip_select	= 0,
+		.max_speed_hz	= 1 * 1000 * 1000,
+		.bus_num	= 1,
+	},
+};
+
+
+/*
+ * Dallas 1-Wire
+ */
+static struct w1_gpio_platform_data w1_gpio_pdata = {
+	.pin		= AT91_PIN_PA29,
+	.is_open_drain	= 1,
+};
+
+static struct platform_device w1_device = {
+	.name			= "w1-gpio",
+	.id			= -1,
+	.dev.platform_data	= &w1_gpio_pdata,
+};
+
+void add_w1(void)
+{
+	at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
+	at91_set_multi_drive(w1_gpio_pdata.pin, 1);
+	platform_device_register(&w1_device);
+}
+
+
+static void __init generic_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* NAND */
+	add_device_nand();
+	/* MMC */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+	at91_add_device_mci(0, &mmc_data);
+#else
+	at91_add_device_mmc(0, &mmc_data);
+#endif
+	/* USB Host */
+	at91_add_device_usbh(&usbh_data);
+	/* Ethernet */
+	at91_add_device_eth(&macb_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* W1 */
+	add_w1();
+}
+
+static void __init portuxg20_board_init(void)
+{
+	generic_board_init();
+	/* SPI */
+	at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
+	/* USB Device */
+	at91_add_device_udc(&portuxg20_udc_data);
+	/* LEDs */
+	at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
+}
+
+static void __init stamp9g20_board_init(void)
+{
+	generic_board_init();
+	/* USB Device */
+	at91_add_device_udc(&stamp9g20_udc_data);
+	/* LEDs */
+	at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
+}
+
+MACHINE_START(PORTUXG20, "taskit PortuxG20")
+	/* Maintainer: taskit GmbH */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= portuxg20_map_io,
+	.init_irq	= init_irq,
+	.init_machine	= portuxg20_board_init,
+MACHINE_END
+
+MACHINE_START(STAMP9G20, "taskit Stamp9G20")
+	/* Maintainer: taskit GmbH */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= stamp9g20_map_io,
+	.init_irq	= init_irq,
+	.init_machine	= stamp9g20_board_init,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-at91/include/mach/board.h linux-libre-2.6.35-gnu/arch/arm/mach-at91/include/mach/board.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-at91/include/mach/board.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-at91/include/mach/board.h	2010-08-01 18:11:14.000000000 -0400
@@ -39,6 +39,7 @@
 #include <linux/usb/atmel_usba_udc.h>
 #include <linux/atmel-mci.h>
 #include <sound/atmel-ac97c.h>
+#include <linux/serial.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -143,9 +144,10 @@
 extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
 
 struct atmel_uart_data {
-	short		use_dma_tx;	/* use transmit DMA? */
-	short		use_dma_rx;	/* use receive DMA? */
-	void __iomem	*regs;		/* virtual base address, if any */
+	short			use_dma_tx;	/* use transmit DMA? */
+	short			use_dma_rx;	/* use receive DMA? */
+	void __iomem		*regs;		/* virt. base address, if any */
+	struct serial_rs485	rs485;		/* rs485 settings */
 };
 extern void __init at91_add_device_serial(void);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-at91/include/mach/cpu.h linux-libre-2.6.35-gnu/arch/arm/mach-at91/include/mach/cpu.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-at91/include/mach/cpu.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-at91/include/mach/cpu.h	2010-08-01 18:11:14.000000000 -0400
@@ -21,7 +21,7 @@
 #define ARCH_ID_AT91SAM9260	0x019803a0
 #define ARCH_ID_AT91SAM9261	0x019703a0
 #define ARCH_ID_AT91SAM9263	0x019607a0
-#define ARCH_ID_AT91SAM9G10	0x819903a0
+#define ARCH_ID_AT91SAM9G10	0x019903a0
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
@@ -108,7 +108,7 @@
 #endif
 
 #ifdef CONFIG_ARCH_AT91SAM9G10
-#define cpu_is_at91sam9g10()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G10)
+#define cpu_is_at91sam9g10()	((at91_cpu_identify() & ~AT91_CIDR_EXT)	== ARCH_ID_AT91SAM9G10)
 #else
 #define cpu_is_at91sam9g10()	(0)
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-at91/include/mach/system.h linux-libre-2.6.35-gnu/arch/arm/mach-at91/include/mach/system.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-at91/include/mach/system.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-at91/include/mach/system.h	2010-08-01 18:11:14.000000000 -0400
@@ -24,21 +24,24 @@
 #include <mach/hardware.h>
 #include <mach/at91_st.h>
 #include <mach/at91_dbgu.h>
+#include <mach/at91_pmc.h>
 
 static inline void arch_idle(void)
 {
+#ifndef CONFIG_DEBUG_KERNEL
 	/*
 	 * Disable the processor clock.  The processor will be automatically
 	 * re-enabled by an interrupt or by a reset.
 	 */
-//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-
+	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+#else
 	/*
 	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
 	 * Unlike disabling the processor clock via the PMC (above)
 	 *  this allows the processor to be woken via JTAG.
 	 */
 	cpu_do_idle();
+#endif
 }
 
 void (*at91_arch_reset)(void);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-at91/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-at91/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-at91/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-at91/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -23,14 +23,12 @@
 config ARCH_AT91RM9200
 	bool "AT91RM9200"
 	select CPU_ARM920T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USART3
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USART3
 	select HAVE_AT91_USART4
@@ -39,28 +37,24 @@
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9G10
 	bool "AT91SAM9G10"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USART3
 	select HAVE_FB_ATMEL
@@ -68,7 +62,6 @@
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USART3
 	select HAVE_AT91_USART4
@@ -77,7 +70,6 @@
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_USART3
 	select HAVE_FB_ATMEL
@@ -85,18 +77,17 @@
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 
 config ARCH_AT572D940HF
 	bool "AT572D940HF"
 	select CPU_ARM926T
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91X40
 	bool "AT91x40"
+	select ARCH_USES_GETTIMEOFFSET
 
 endchoice
 
@@ -360,6 +351,19 @@
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9G20 Board <http://www.eukrea.com/>
 
+config MACH_PORTUXG20
+	bool "taskit PortuxG20"
+	help
+	  Select this if you are using taskit's PortuxG20.
+	  <http://www.taskit.de/en/>
+
+config MACH_STAMP9G20
+	bool "taskit Stamp9G20 CPU module"
+	help
+	  Select this if you are using taskit's Stamp9G20 CPU module on its
+	  evaluation board.
+	  <http://www.taskit.de/en/>
+
 endif
 
 # ----------------------------------------------------------
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-at91/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-at91/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-at91/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-at91/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -63,6 +63,8 @@
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
+obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
+obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
 
 # AT91SAM9G45 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-bcmring/arch.c linux-libre-2.6.35-gnu/arch/arm/mach-bcmring/arch.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-bcmring/arch.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-bcmring/arch.c	2010-08-01 18:11:14.000000000 -0400
@@ -29,6 +29,7 @@
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
+#include <asm/pmu.h>
 
 #include <asm/mach/arch.h>
 #include <mach/dma.h>
@@ -85,8 +86,23 @@
 	.num_resources	= ARRAY_SIZE(nand_resource),
 };
 
+static struct resource pmu_resource = {
+	.start	= IRQ_PMUIRQ,
+	.end	= IRQ_PMUIRQ,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.resource	= &pmu_resource,
+	.num_resources	= 1,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&nand_device,
+	&pmu_device,
 };
 
 /****************************************************************************
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-clps711x/include/mach/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-clps711x/include/mach/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-clps711x/include/mach/debug-macro.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-clps711x/include/mach/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -11,6 +11,7 @@
  *
 */
 
+#include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
 		.macro	addruart, rx, tmp
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-clps711x/Makefile.boot linux-libre-2.6.35-gnu/arch/arm/mach-clps711x/Makefile.boot
--- linux-libre-2.6.34-gnu/arch/arm/mach-clps711x/Makefile.boot	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-clps711x/Makefile.boot	2010-08-01 18:11:14.000000000 -0400
@@ -1,7 +1,6 @@
 # The standard locations for stuff on CLPS711x type processors
-   zreladdr-y				:= 0xc0028000 
+   zreladdr-y				:= 0xc0028000
 params_phys-y				:= 0xc0000100
 # Should probably have some agreement on these...
 initrd_phys-$(CONFIG_ARCH_P720T)	:= 0xc0400000
 initrd_phys-$(CONFIG_ARCH_CDB89712)	:= 0x00700000
-
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-clps711x/mm.c linux-libre-2.6.35-gnu/arch/arm/mach-clps711x/mm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-clps711x/mm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-clps711x/mm.c	2010-08-01 18:11:14.000000000 -0400
@@ -22,7 +22,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/bootmem.h>
 
 #include <asm/sizes.h>
 #include <mach/hardware.h>
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/cns3420vb.c linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/cns3420vb.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/cns3420vb.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/cns3420vb.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,148 @@
+/*
+ * Cavium Networks CNS3420 Validation Board
+ *
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2008 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *		  Scott Shu
+ * Copyright 2010 MontaVista Software, LLC.
+ *		  Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/cns3xxx.h>
+#include <mach/irqs.h>
+#include "core.h"
+
+/*
+ * NOR Flash
+ */
+static struct mtd_partition cns3420_nor_partitions[] = {
+	{
+		.name		= "uboot",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.size		= 0x004C0000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "filesystem",
+		.size		= 0x7000000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "filesystem2",
+		.size		= 0x0AE0000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "ubootenv",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data cns3420_nor_pdata = {
+	.width = 2,
+	.parts = cns3420_nor_partitions,
+	.nr_parts = ARRAY_SIZE(cns3420_nor_partitions),
+};
+
+static struct resource cns3420_nor_res = {
+	.start = CNS3XXX_FLASH_BASE,
+	.end = CNS3XXX_FLASH_BASE + SZ_128M - 1,
+	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct platform_device cns3420_nor_pdev = {
+	.name = "physmap-flash",
+	.id = 0,
+	.resource = &cns3420_nor_res,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &cns3420_nor_pdata,
+	},
+};
+
+/*
+ * UART
+ */
+static void __init cns3420_early_serial_setup(void)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	static struct uart_port cns3420_serial_port = {
+		.membase        = (void __iomem *)CNS3XXX_UART0_BASE_VIRT,
+		.mapbase        = CNS3XXX_UART0_BASE,
+		.irq            = IRQ_CNS3XXX_UART0,
+		.iotype         = UPIO_MEM,
+		.flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.regshift       = 2,
+		.uartclk        = 24000000,
+		.line           = 0,
+		.type           = PORT_16550A,
+		.fifosize       = 16,
+	};
+
+	early_serial_setup(&cns3420_serial_port);
+#endif
+}
+
+/*
+ * Initialization
+ */
+static struct platform_device *cns3420_pdevs[] __initdata = {
+	&cns3420_nor_pdev,
+};
+
+static void __init cns3420_init(void)
+{
+	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
+
+	pm_power_off = cns3xxx_power_off;
+}
+
+static struct map_desc cns3420_io_desc[] __initdata = {
+	{
+		.virtual	= CNS3XXX_UART0_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init cns3420_map_io(void)
+{
+	cns3xxx_map_io();
+	iotable_init(cns3420_io_desc, ARRAY_SIZE(cns3420_io_desc));
+
+	cns3420_early_serial_setup();
+}
+
+MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
+	.phys_io	= CNS3XXX_UART0_BASE,
+	.io_pg_offst	= (CNS3XXX_UART0_BASE_VIRT >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= cns3420_map_io,
+	.init_irq	= cns3xxx_init_irq,
+	.timer		= &cns3xxx_timer,
+	.init_machine	= cns3420_init,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/core.c linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/core.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/core.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/core.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,249 @@
+/*
+ * Copyright 1999 - 2003 ARM Limited
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/hardware/gic.h>
+#include <mach/cns3xxx.h>
+#include "core.h"
+
+static struct map_desc cns3xxx_io_desc[] __initdata = {
+	{
+		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TIMER1_2_3_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_GPIOA_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_GPIOA_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_GPIOB_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_GPIOB_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_MISC_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_MISC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= CNS3XXX_PM_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_PM_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init cns3xxx_map_io(void)
+{
+	iotable_init(cns3xxx_io_desc, ARRAY_SIZE(cns3xxx_io_desc));
+}
+
+/* used by entry-macro.S */
+void __iomem *gic_cpu_base_addr;
+
+void __init cns3xxx_init_irq(void)
+{
+	gic_cpu_base_addr = __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT);
+	gic_dist_init(0, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), 29);
+	gic_cpu_init(0, gic_cpu_base_addr);
+}
+
+void cns3xxx_power_off(void)
+{
+	u32 __iomem *pm_base = __io(CNS3XXX_PM_BASE_VIRT);
+	u32 clkctrl;
+
+	printk(KERN_INFO "powering system down...\n");
+
+	clkctrl = readl(pm_base + PM_SYS_CLK_CTRL_OFFSET);
+	clkctrl &= 0xfffff1ff;
+	clkctrl |= (0x5 << 9);		/* Hibernate */
+	writel(clkctrl, pm_base + PM_SYS_CLK_CTRL_OFFSET);
+
+}
+
+/*
+ * Timer
+ */
+static void __iomem *cns3xxx_tmr1;
+
+static void cns3xxx_timer_set_mode(enum clock_event_mode mode,
+				   struct clock_event_device *clk)
+{
+	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	int pclk = cns3xxx_cpu_clock() / 8;
+	int reload;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		reload = pclk * 20 / (3 * HZ) * 0x25000;
+		writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+		ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl |= (1 << 2) | (1 << 9);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		ctrl = 0;
+	}
+
+	writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+}
+
+static int cns3xxx_timer_set_next_event(unsigned long evt,
+					struct clock_event_device *unused)
+{
+	unsigned long ctrl = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+
+	writel(evt, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+	writel(ctrl | (1 << 0), cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+
+	return 0;
+}
+
+static struct clock_event_device cns3xxx_tmr1_clockevent = {
+	.name		= "cns3xxx timer1",
+	.shift		= 8,
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= cns3xxx_timer_set_mode,
+	.set_next_event	= cns3xxx_timer_set_next_event,
+	.rating		= 350,
+	.cpumask	= cpu_all_mask,
+};
+
+static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
+{
+	cns3xxx_tmr1_clockevent.irq = timer_irq;
+	cns3xxx_tmr1_clockevent.mult =
+		div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC,
+		       cns3xxx_tmr1_clockevent.shift);
+	cns3xxx_tmr1_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent);
+	cns3xxx_tmr1_clockevent.min_delta_ns =
+		clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent);
+
+	clockevents_register_device(&cns3xxx_tmr1_clockevent);
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t cns3xxx_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &cns3xxx_tmr1_clockevent;
+	u32 __iomem *stat = cns3xxx_tmr1 + TIMER1_2_INTERRUPT_STATUS_OFFSET;
+	u32 val;
+
+	/* Clear the interrupt */
+	val = readl(stat);
+	writel(val & ~(1 << 2), stat);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction cns3xxx_timer_irq = {
+	.name		= "timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= cns3xxx_timer_interrupt,
+};
+
+/*
+ * Set up the clock source and clock events devices
+ */
+static void __init __cns3xxx_timer_init(unsigned int timer_irq)
+{
+	u32 val;
+	u32 irq_mask;
+
+	/*
+	 * Initialise to a known state (all timers off)
+	 */
+
+	/* disable timer1 and timer2 */
+	writel(0, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	/* stop free running timer3 */
+	writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
+
+	/* timer1 */
+	writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
+	writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
+
+	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
+	writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
+
+	/* mask irq, non-mask timer1 overflow */
+	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+	irq_mask &= ~(1 << 2);
+	irq_mask |= 0x03;
+	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+
+	/* down counter */
+	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	val |= (1 << 9);
+	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+
+	/* timer2 */
+	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
+	writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
+
+	/* mask irq */
+	irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+	irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
+	writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
+
+	/* down counter */
+	val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+	val |= (1 << 10);
+	writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
+
+	/* Make irqs happen for the system timer */
+	setup_irq(timer_irq, &cns3xxx_timer_irq);
+
+	cns3xxx_clockevents_init(timer_irq);
+}
+
+static void __init cns3xxx_timer_init(void)
+{
+	cns3xxx_tmr1 = __io(CNS3XXX_TIMER1_2_3_BASE_VIRT);
+
+	__cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
+}
+
+struct sys_timer cns3xxx_timer = {
+	.init = cns3xxx_timer_init,
+};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/core.h linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/core.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/core.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/core.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2004 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CNS3XXX_CORE_H
+#define __CNS3XXX_CORE_H
+
+extern void __iomem *gic_cpu_base_addr;
+extern struct sys_timer cns3xxx_timer;
+
+void __init cns3xxx_map_io(void);
+void __init cns3xxx_init_irq(void);
+void cns3xxx_power_off(void);
+void cns3xxx_pwr_power_up(unsigned int block);
+void cns3xxx_pwr_power_down(unsigned int block);
+
+#endif /* __CNS3XXX_CORE_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,635 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_BOARD_CNS3XXXH
+#define __MACH_BOARD_CNS3XXXH
+
+/*
+ * Memory map
+ */
+#define CNS3XXX_FLASH_BASE			0x10000000	/* Flash/SRAM Memory Bank 0 */
+#define CNS3XXX_FLASH_SIZE			SZ_256M
+
+#define CNS3XXX_DDR2SDRAM_BASE			0x20000000	/* DDR2 SDRAM Memory */
+
+#define CNS3XXX_SPI_FLASH_BASE			0x60000000	/* SPI Serial Flash Memory */
+
+#define CNS3XXX_SWITCH_BASE			0x70000000	/* Switch and HNAT Control */
+#define CNS3XXX_SWITCH_BASE_VIRT		0xFFF00000
+
+#define CNS3XXX_PPE_BASE			0x70001000	/* HANT	*/
+#define CNS3XXX_PPE_BASE_VIRT			0xFFF50000
+
+#define CNS3XXX_EMBEDDED_SRAM_BASE		0x70002000	/* HANT Embedded SRAM */
+#define CNS3XXX_EMBEDDED_SRAM_BASE_VIRT		0xFFF60000
+
+#define CNS3XXX_SSP_BASE			0x71000000	/* Synchronous Serial Port - SPI/PCM/I2C */
+#define CNS3XXX_SSP_BASE_VIRT			0xFFF01000
+
+#define CNS3XXX_DMC_BASE			0x72000000	/* DMC Control (DDR2 SDRAM) */
+#define CNS3XXX_DMC_BASE_VIRT			0xFFF02000
+
+#define CNS3XXX_SMC_BASE			0x73000000	/* SMC Control */
+#define CNS3XXX_SMC_BASE_VIRT			0xFFF03000
+
+#define SMC_MEMC_STATUS_OFFSET			0x000
+#define SMC_MEMIF_CFG_OFFSET			0x004
+#define SMC_MEMC_CFG_SET_OFFSET			0x008
+#define SMC_MEMC_CFG_CLR_OFFSET			0x00C
+#define SMC_DIRECT_CMD_OFFSET			0x010
+#define SMC_SET_CYCLES_OFFSET			0x014
+#define SMC_SET_OPMODE_OFFSET			0x018
+#define SMC_REFRESH_PERIOD_0_OFFSET		0x020
+#define SMC_REFRESH_PERIOD_1_OFFSET		0x024
+#define SMC_SRAM_CYCLES0_0_OFFSET		0x100
+#define SMC_NAND_CYCLES0_0_OFFSET		0x100
+#define SMC_OPMODE0_0_OFFSET			0x104
+#define SMC_SRAM_CYCLES0_1_OFFSET		0x120
+#define SMC_NAND_CYCLES0_1_OFFSET		0x120
+#define SMC_OPMODE0_1_OFFSET			0x124
+#define SMC_USER_STATUS_OFFSET			0x200
+#define SMC_USER_CONFIG_OFFSET			0x204
+#define SMC_ECC_STATUS_OFFSET			0x300
+#define SMC_ECC_MEMCFG_OFFSET			0x304
+#define SMC_ECC_MEMCOMMAND1_OFFSET		0x308
+#define SMC_ECC_MEMCOMMAND2_OFFSET		0x30C
+#define SMC_ECC_ADDR0_OFFSET			0x310
+#define SMC_ECC_ADDR1_OFFSET			0x314
+#define SMC_ECC_VALUE0_OFFSET			0x318
+#define SMC_ECC_VALUE1_OFFSET			0x31C
+#define SMC_ECC_VALUE2_OFFSET			0x320
+#define SMC_ECC_VALUE3_OFFSET			0x324
+#define SMC_PERIPH_ID_0_OFFSET			0xFE0
+#define SMC_PERIPH_ID_1_OFFSET			0xFE4
+#define SMC_PERIPH_ID_2_OFFSET			0xFE8
+#define SMC_PERIPH_ID_3_OFFSET			0xFEC
+#define SMC_PCELL_ID_0_OFFSET			0xFF0
+#define SMC_PCELL_ID_1_OFFSET			0xFF4
+#define SMC_PCELL_ID_2_OFFSET			0xFF8
+#define SMC_PCELL_ID_3_OFFSET			0xFFC
+
+#define CNS3XXX_GPIOA_BASE			0x74000000	/* GPIO port A */
+#define CNS3XXX_GPIOA_BASE_VIRT			0xFFF04000
+
+#define CNS3XXX_GPIOB_BASE			0x74800000	/* GPIO port B */
+#define CNS3XXX_GPIOB_BASE_VIRT			0xFFF05000
+
+#define CNS3XXX_RTC_BASE			0x75000000	/* Real Time Clock */
+#define CNS3XXX_RTC_BASE_VIRT			0xFFF06000
+
+#define RTC_SEC_OFFSET				0x00
+#define RTC_MIN_OFFSET				0x04
+#define RTC_HOUR_OFFSET				0x08
+#define RTC_DAY_OFFSET				0x0C
+#define RTC_SEC_ALM_OFFSET			0x10
+#define RTC_MIN_ALM_OFFSET			0x14
+#define RTC_HOUR_ALM_OFFSET			0x18
+#define RTC_REC_OFFSET				0x1C
+#define RTC_CTRL_OFFSET				0x20
+#define RTC_INTR_STS_OFFSET			0x34
+
+#define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT			0xFFF07000	/* Misc Control */
+
+#define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
+#define CNS3XXX_PM_BASE_VIRT			0xFFF08000
+
+#define PM_CLK_GATE_OFFSET			0x00
+#define PM_SOFT_RST_OFFSET			0x04
+#define PM_HS_CFG_OFFSET			0x08
+#define PM_CACTIVE_STA_OFFSET			0x0C
+#define PM_PWR_STA_OFFSET			0x10
+#define PM_SYS_CLK_CTRL_OFFSET			0x14
+#define PM_PLL_LCD_I2S_CTRL_OFFSET		0x18
+#define PM_PLL_HM_PD_OFFSET			0x1C
+
+#define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
+#define CNS3XXX_UART0_BASE_VIRT			0xFFF09000
+
+#define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
+#define CNS3XXX_UART1_BASE_VIRT			0xFFF0A000
+
+#define CNS3XXX_UART2_BASE			0x78800000	/* UART 2 */
+#define CNS3XXX_UART2_BASE_VIRT			0xFFF0B000
+
+#define CNS3XXX_DMAC_BASE			0x79000000	/* Generic DMA Control */
+#define CNS3XXX_DMAC_BASE_VIRT			0xFFF0D000
+
+#define CNS3XXX_CORESIGHT_BASE			0x7A000000	/* CoreSight */
+#define CNS3XXX_CORESIGHT_BASE_VIRT		0xFFF0E000
+
+#define CNS3XXX_CRYPTO_BASE			0x7B000000	/* Crypto */
+#define CNS3XXX_CRYPTO_BASE_VIRT		0xFFF0F000
+
+#define CNS3XXX_I2S_BASE			0x7C000000	/* I2S */
+#define CNS3XXX_I2S_BASE_VIRT			0xFFF10000
+
+#define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFFF10800
+
+#define TIMER1_COUNTER_OFFSET			0x00
+#define TIMER1_AUTO_RELOAD_OFFSET		0x04
+#define TIMER1_MATCH_V1_OFFSET			0x08
+#define TIMER1_MATCH_V2_OFFSET			0x0C
+
+#define TIMER2_COUNTER_OFFSET			0x10
+#define TIMER2_AUTO_RELOAD_OFFSET		0x14
+#define TIMER2_MATCH_V1_OFFSET			0x18
+#define TIMER2_MATCH_V2_OFFSET			0x1C
+
+#define TIMER1_2_CONTROL_OFFSET			0x30
+#define TIMER1_2_INTERRUPT_STATUS_OFFSET	0x34
+#define TIMER1_2_INTERRUPT_MASK_OFFSET		0x38
+
+#define TIMER_FREERUN_OFFSET			0x40
+#define TIMER_FREERUN_CONTROL_OFFSET		0x44
+
+#define CNS3XXX_HCIE_BASE			0x7D000000	/* HCIE Control */
+#define CNS3XXX_HCIE_BASE_VIRT			0xFFF30000
+
+#define CNS3XXX_RAID_BASE			0x7E000000	/* RAID Control */
+#define CNS3XXX_RAID_BASE_VIRT			0xFFF12000
+
+#define CNS3XXX_AXI_IXC_BASE			0x7F000000	/* AXI IXC */
+#define CNS3XXX_AXI_IXC_BASE_VIRT		0xFFF13000
+
+#define CNS3XXX_CLCD_BASE			0x80000000	/* LCD Control */
+#define CNS3XXX_CLCD_BASE_VIRT			0xFFF14000
+
+#define CNS3XXX_USBOTG_BASE			0x81000000	/* USB OTG Control */
+#define CNS3XXX_USBOTG_BASE_VIRT		0xFFF15000
+
+#define CNS3XXX_USB_BASE			0x82000000	/* USB Host Control */
+#define CNS3XXX_USB_BASE_VIRT			0xFFF16000
+
+#define CNS3XXX_SATA2_BASE			0x83000000	/* SATA */
+#define CNS3XXX_SATA2_SIZE			SZ_16M
+#define CNS3XXX_SATA2_BASE_VIRT			0xFFF17000
+
+#define CNS3XXX_CAMERA_BASE			0x84000000	/* Camera Interface */
+#define CNS3XXX_CAMERA_BASE_VIRT		0xFFF18000
+
+#define CNS3XXX_SDIO_BASE			0x85000000	/* SDIO */
+#define CNS3XXX_SDIO_BASE_VIRT			0xFFF19000
+
+#define CNS3XXX_I2S_TDM_BASE			0x86000000	/* I2S TDM */
+#define CNS3XXX_I2S_TDM_BASE_VIRT		0xFFF1A000
+
+#define CNS3XXX_2DG_BASE			0x87000000	/* 2D Graphic Control */
+#define CNS3XXX_2DG_BASE_VIRT			0xFFF1B000
+
+#define CNS3XXX_USB_OHCI_BASE			0x88000000	/* USB OHCI */
+#define CNS3XXX_USB_OHCI_BASE_VIRT		0xFFF1C000
+
+#define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
+#define CNS3XXX_L2C_BASE_VIRT			0xFFF27000
+
+#define CNS3XXX_PCIE0_MEM_BASE			0xA0000000	/* PCIe Port 0 IO/Memory Space */
+#define CNS3XXX_PCIE0_MEM_BASE_VIRT		0xE0000000
+
+#define CNS3XXX_PCIE0_HOST_BASE			0xAB000000	/* PCIe Port 0 RC Base */
+#define CNS3XXX_PCIE0_HOST_BASE_VIRT		0xE1000000
+
+#define CNS3XXX_PCIE0_IO_BASE			0xAC000000	/* PCIe Port 0 */
+#define CNS3XXX_PCIE0_IO_BASE_VIRT		0xE2000000
+
+#define CNS3XXX_PCIE0_CFG0_BASE			0xAD000000	/* PCIe Port 0 CFG Type 0 */
+#define CNS3XXX_PCIE0_CFG0_BASE_VIRT		0xE3000000
+
+#define CNS3XXX_PCIE0_CFG1_BASE			0xAE000000	/* PCIe Port 0 CFG Type 1 */
+#define CNS3XXX_PCIE0_CFG1_BASE_VIRT		0xE4000000
+
+#define CNS3XXX_PCIE0_MSG_BASE			0xAF000000	/* PCIe Port 0 Message Space */
+#define CNS3XXX_PCIE0_MSG_BASE_VIRT		0xE5000000
+
+#define CNS3XXX_PCIE1_MEM_BASE			0xB0000000	/* PCIe Port 1 IO/Memory Space */
+#define CNS3XXX_PCIE1_MEM_BASE_VIRT		0xE8000000
+
+#define CNS3XXX_PCIE1_HOST_BASE			0xBB000000	/* PCIe Port 1 RC Base */
+#define CNS3XXX_PCIE1_HOST_BASE_VIRT		0xE9000000
+
+#define CNS3XXX_PCIE1_IO_BASE			0xBC000000	/* PCIe Port 1 */
+#define CNS3XXX_PCIE1_IO_BASE_VIRT		0xEA000000
+
+#define CNS3XXX_PCIE1_CFG0_BASE			0xBD000000	/* PCIe Port 1 CFG Type 0 */
+#define CNS3XXX_PCIE1_CFG0_BASE_VIRT		0xEB000000
+
+#define CNS3XXX_PCIE1_CFG1_BASE			0xBE000000	/* PCIe Port 1 CFG Type 1 */
+#define CNS3XXX_PCIE1_CFG1_BASE_VIRT		0xEC000000
+
+#define CNS3XXX_PCIE1_MSG_BASE			0xBF000000	/* PCIe Port 1 Message Space */
+#define CNS3XXX_PCIE1_MSG_BASE_VIRT		0xED000000
+
+/*
+ * Testchip peripheral and fpga gic regions
+ */
+#define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFF000000
+
+#define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	0xFF000100
+
+#define CNS3XXX_TC11MP_TWD_BASE			0x90000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT		0xFF000600
+
+#define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	0xFF001000
+
+#define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
+#define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000
+
+/*
+ * Misc block
+ */
+#define MISC_MEM_MAP(offs) (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + (offs))
+#define MISC_MEM_MAP_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_MISC_BASE_VIRT + (offset))))
+
+#define MISC_MEMORY_REMAP_REG			MISC_MEM_MAP_VALUE(0x00)
+#define MISC_CHIP_CONFIG_REG			MISC_MEM_MAP_VALUE(0x04)
+#define MISC_DEBUG_PROBE_DATA_REG		MISC_MEM_MAP_VALUE(0x08)
+#define MISC_DEBUG_PROBE_SELECTION_REG		MISC_MEM_MAP_VALUE(0x0C)
+#define MISC_IO_PIN_FUNC_SELECTION_REG		MISC_MEM_MAP_VALUE(0x10)
+#define MISC_GPIOA_PIN_ENABLE_REG		MISC_MEM_MAP_VALUE(0x14)
+#define MISC_GPIOB_PIN_ENABLE_REG		MISC_MEM_MAP_VALUE(0x18)
+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_A	MISC_MEM_MAP_VALUE(0x1C)
+#define MISC_IO_PAD_DRIVE_STRENGTH_CTRL_B	MISC_MEM_MAP_VALUE(0x20)
+#define MISC_GPIOA_15_0_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x24)
+#define MISC_GPIOA_16_31_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x28)
+#define MISC_GPIOB_15_0_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x2C)
+#define MISC_GPIOB_16_31_PULL_CTRL_REG		MISC_MEM_MAP_VALUE(0x30)
+#define MISC_IO_PULL_CTRL_REG			MISC_MEM_MAP_VALUE(0x34)
+#define MISC_E_FUSE_31_0_REG			MISC_MEM_MAP_VALUE(0x40)
+#define MISC_E_FUSE_63_32_REG			MISC_MEM_MAP_VALUE(0x44)
+#define MISC_E_FUSE_95_64_REG			MISC_MEM_MAP_VALUE(0x48)
+#define MISC_E_FUSE_127_96_REG			MISC_MEM_MAP_VALUE(0x4C)
+#define MISC_SOFTWARE_TEST_1_REG		MISC_MEM_MAP_VALUE(0x50)
+#define MISC_SOFTWARE_TEST_2_REG		MISC_MEM_MAP_VALUE(0x54)
+
+#define MISC_SATA_POWER_MODE			MISC_MEM_MAP_VALUE(0x310)
+
+#define MISC_USB_CFG_REG			MISC_MEM_MAP_VALUE(0x800)
+#define MISC_USB_STS_REG			MISC_MEM_MAP_VALUE(0x804)
+#define MISC_USBPHY00_CFG_REG			MISC_MEM_MAP_VALUE(0x808)
+#define MISC_USBPHY01_CFG_REG			MISC_MEM_MAP_VALUE(0x80c)
+#define MISC_USBPHY10_CFG_REG			MISC_MEM_MAP_VALUE(0x810)
+#define MISC_USBPHY11_CFG_REG			MISC_MEM_MAP_VALUE(0x814)
+
+#define MISC_PCIEPHY_CMCTL(x)			MISC_MEM_MAP(0x900 + (x) * 0x004)
+#define MISC_PCIEPHY_CTL(x)			MISC_MEM_MAP(0x940 + (x) * 0x100)
+#define MISC_PCIE_AXIS_AWMISC(x)		MISC_MEM_MAP(0x944 + (x) * 0x100)
+#define MISC_PCIE_AXIS_ARMISC(x)		MISC_MEM_MAP(0x948 + (x) * 0x100)
+#define MISC_PCIE_AXIS_RMISC(x)			MISC_MEM_MAP(0x94C + (x) * 0x100)
+#define MISC_PCIE_AXIS_BMISC(x)			MISC_MEM_MAP(0x950 + (x) * 0x100)
+#define MISC_PCIE_AXIM_RMISC(x)			MISC_MEM_MAP(0x954 + (x) * 0x100)
+#define MISC_PCIE_AXIM_BMISC(x)			MISC_MEM_MAP(0x958 + (x) * 0x100)
+#define MISC_PCIE_CTRL(x)			MISC_MEM_MAP(0x95C + (x) * 0x100)
+#define MISC_PCIE_PM_DEBUG(x)			MISC_MEM_MAP(0x960 + (x) * 0x100)
+#define MISC_PCIE_RFC_DEBUG(x)			MISC_MEM_MAP(0x964 + (x) * 0x100)
+#define MISC_PCIE_CXPL_DEBUGL(x)		MISC_MEM_MAP(0x968 + (x) * 0x100)
+#define MISC_PCIE_CXPL_DEBUGH(x)		MISC_MEM_MAP(0x96C + (x) * 0x100)
+#define MISC_PCIE_DIAG_DEBUGH(x)		MISC_MEM_MAP(0x970 + (x) * 0x100)
+#define MISC_PCIE_W1CLR(x)			MISC_MEM_MAP(0x974 + (x) * 0x100)
+#define MISC_PCIE_INT_MASK(x)			MISC_MEM_MAP(0x978 + (x) * 0x100)
+#define MISC_PCIE_INT_STATUS(x)			MISC_MEM_MAP(0x97C + (x) * 0x100)
+
+/*
+ * Power management and clock control
+ */
+#define PMU_REG_VALUE(offset) (*((volatile unsigned int *)(CNS3XXX_PM_BASE_VIRT + (offset))))
+
+#define PM_CLK_GATE_REG					PMU_REG_VALUE(0x000)
+#define PM_SOFT_RST_REG					PMU_REG_VALUE(0x004)
+#define PM_HS_CFG_REG					PMU_REG_VALUE(0x008)
+#define PM_CACTIVE_STA_REG				PMU_REG_VALUE(0x00C)
+#define PM_PWR_STA_REG					PMU_REG_VALUE(0x010)
+#define PM_CLK_CTRL_REG					PMU_REG_VALUE(0x014)
+#define PM_PLL_LCD_I2S_CTRL_REG				PMU_REG_VALUE(0x018)
+#define PM_PLL_HM_PD_CTRL_REG				PMU_REG_VALUE(0x01C)
+#define PM_REGULAT_CTRL_REG				PMU_REG_VALUE(0x020)
+#define PM_WDT_CTRL_REG					PMU_REG_VALUE(0x024)
+#define PM_WU_CTRL0_REG					PMU_REG_VALUE(0x028)
+#define PM_WU_CTRL1_REG					PMU_REG_VALUE(0x02C)
+#define PM_CSR_REG					PMU_REG_VALUE(0x030)
+
+/* PM_CLK_GATE_REG */
+#define PM_CLK_GATE_REG_OFFSET_SDIO			(25)
+#define PM_CLK_GATE_REG_OFFSET_GPU			(24)
+#define PM_CLK_GATE_REG_OFFSET_CIM			(23)
+#define PM_CLK_GATE_REG_OFFSET_LCDC			(22)
+#define PM_CLK_GATE_REG_OFFSET_I2S			(21)
+#define PM_CLK_GATE_REG_OFFSET_RAID			(20)
+#define PM_CLK_GATE_REG_OFFSET_SATA			(19)
+#define PM_CLK_GATE_REG_OFFSET_PCIE(x)			(17 + (x))
+#define PM_CLK_GATE_REG_OFFSET_USB_HOST			(16)
+#define PM_CLK_GATE_REG_OFFSET_USB_OTG			(15)
+#define PM_CLK_GATE_REG_OFFSET_TIMER			(14)
+#define PM_CLK_GATE_REG_OFFSET_CRYPTO			(13)
+#define PM_CLK_GATE_REG_OFFSET_HCIE			(12)
+#define PM_CLK_GATE_REG_OFFSET_SWITCH			(11)
+#define PM_CLK_GATE_REG_OFFSET_GPIO			(10)
+#define PM_CLK_GATE_REG_OFFSET_UART3			(9)
+#define PM_CLK_GATE_REG_OFFSET_UART2			(8)
+#define PM_CLK_GATE_REG_OFFSET_UART1			(7)
+#define PM_CLK_GATE_REG_OFFSET_RTC			(5)
+#define PM_CLK_GATE_REG_OFFSET_GDMA			(4)
+#define PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C		(3)
+#define PM_CLK_GATE_REG_OFFSET_SMC_NFI			(1)
+#define PM_CLK_GATE_REG_MASK				(0x03FFFFBA)
+
+/* PM_SOFT_RST_REG */
+#define PM_SOFT_RST_REG_OFFST_WARM_RST_FLAG		(31)
+#define PM_SOFT_RST_REG_OFFST_CPU1			(29)
+#define PM_SOFT_RST_REG_OFFST_CPU0			(28)
+#define PM_SOFT_RST_REG_OFFST_SDIO			(25)
+#define PM_SOFT_RST_REG_OFFST_GPU			(24)
+#define PM_SOFT_RST_REG_OFFST_CIM			(23)
+#define PM_SOFT_RST_REG_OFFST_LCDC			(22)
+#define PM_SOFT_RST_REG_OFFST_I2S			(21)
+#define PM_SOFT_RST_REG_OFFST_RAID			(20)
+#define PM_SOFT_RST_REG_OFFST_SATA			(19)
+#define PM_SOFT_RST_REG_OFFST_PCIE(x)			(17 + (x))
+#define PM_SOFT_RST_REG_OFFST_USB_HOST			(16)
+#define PM_SOFT_RST_REG_OFFST_USB_OTG			(15)
+#define PM_SOFT_RST_REG_OFFST_TIMER			(14)
+#define PM_SOFT_RST_REG_OFFST_CRYPTO			(13)
+#define PM_SOFT_RST_REG_OFFST_HCIE			(12)
+#define PM_SOFT_RST_REG_OFFST_SWITCH			(11)
+#define PM_SOFT_RST_REG_OFFST_GPIO			(10)
+#define PM_SOFT_RST_REG_OFFST_UART3			(9)
+#define PM_SOFT_RST_REG_OFFST_UART2			(8)
+#define PM_SOFT_RST_REG_OFFST_UART1			(7)
+#define PM_SOFT_RST_REG_OFFST_RTC			(5)
+#define PM_SOFT_RST_REG_OFFST_GDMA			(4)
+#define PM_SOFT_RST_REG_OFFST_SPI_PCM_I2C		(3)
+#define PM_SOFT_RST_REG_OFFST_DMC			(2)
+#define PM_SOFT_RST_REG_OFFST_SMC_NFI			(1)
+#define PM_SOFT_RST_REG_OFFST_GLOBAL			(0)
+#define PM_SOFT_RST_REG_MASK				(0xF3FFFFBF)
+
+/* PMHS_CFG_REG */
+#define PM_HS_CFG_REG_OFFSET_SDIO			(25)
+#define PM_HS_CFG_REG_OFFSET_GPU			(24)
+#define PM_HS_CFG_REG_OFFSET_CIM			(23)
+#define PM_HS_CFG_REG_OFFSET_LCDC			(22)
+#define PM_HS_CFG_REG_OFFSET_I2S			(21)
+#define PM_HS_CFG_REG_OFFSET_RAID			(20)
+#define PM_HS_CFG_REG_OFFSET_SATA			(19)
+#define PM_HS_CFG_REG_OFFSET_PCIE1			(18)
+#define PM_HS_CFG_REG_OFFSET_PCIE0			(17)
+#define PM_HS_CFG_REG_OFFSET_USB_HOST			(16)
+#define PM_HS_CFG_REG_OFFSET_USB_OTG			(15)
+#define PM_HS_CFG_REG_OFFSET_TIMER			(14)
+#define PM_HS_CFG_REG_OFFSET_CRYPTO			(13)
+#define PM_HS_CFG_REG_OFFSET_HCIE			(12)
+#define PM_HS_CFG_REG_OFFSET_SWITCH			(11)
+#define PM_HS_CFG_REG_OFFSET_GPIO			(10)
+#define PM_HS_CFG_REG_OFFSET_UART3			(9)
+#define PM_HS_CFG_REG_OFFSET_UART2			(8)
+#define PM_HS_CFG_REG_OFFSET_UART1			(7)
+#define PM_HS_CFG_REG_OFFSET_RTC			(5)
+#define PM_HS_CFG_REG_OFFSET_GDMA			(4)
+#define PM_HS_CFG_REG_OFFSET_SPI_PCM_I2S		(3)
+#define PM_HS_CFG_REG_OFFSET_DMC			(2)
+#define PM_HS_CFG_REG_OFFSET_SMC_NFI			(1)
+#define PM_HS_CFG_REG_MASK				(0x03FFFFBE)
+#define PM_HS_CFG_REG_MASK_SUPPORT			(0x01100806)
+
+/* PM_CACTIVE_STA_REG */
+#define PM_CACTIVE_STA_REG_OFFSET_SDIO			(25)
+#define PM_CACTIVE_STA_REG_OFFSET_GPU			(24)
+#define PM_CACTIVE_STA_REG_OFFSET_CIM			(23)
+#define PM_CACTIVE_STA_REG_OFFSET_LCDC			(22)
+#define PM_CACTIVE_STA_REG_OFFSET_I2S			(21)
+#define PM_CACTIVE_STA_REG_OFFSET_RAID			(20)
+#define PM_CACTIVE_STA_REG_OFFSET_SATA			(19)
+#define PM_CACTIVE_STA_REG_OFFSET_PCIE1			(18)
+#define PM_CACTIVE_STA_REG_OFFSET_PCIE0			(17)
+#define PM_CACTIVE_STA_REG_OFFSET_USB_HOST		(16)
+#define PM_CACTIVE_STA_REG_OFFSET_USB_OTG		(15)
+#define PM_CACTIVE_STA_REG_OFFSET_TIMER			(14)
+#define PM_CACTIVE_STA_REG_OFFSET_CRYPTO		(13)
+#define PM_CACTIVE_STA_REG_OFFSET_HCIE			(12)
+#define PM_CACTIVE_STA_REG_OFFSET_SWITCH		(11)
+#define PM_CACTIVE_STA_REG_OFFSET_GPIO			(10)
+#define PM_CACTIVE_STA_REG_OFFSET_UART3			(9)
+#define PM_CACTIVE_STA_REG_OFFSET_UART2			(8)
+#define PM_CACTIVE_STA_REG_OFFSET_UART1			(7)
+#define PM_CACTIVE_STA_REG_OFFSET_RTC			(5)
+#define PM_CACTIVE_STA_REG_OFFSET_GDMA			(4)
+#define PM_CACTIVE_STA_REG_OFFSET_SPI_PCM_I2S		(3)
+#define PM_CACTIVE_STA_REG_OFFSET_DMC			(2)
+#define PM_CACTIVE_STA_REG_OFFSET_SMC_NFI		(1)
+#define PM_CACTIVE_STA_REG_MASK				(0x03FFFFBE)
+
+/* PM_PWR_STA_REG */
+#define PM_PWR_STA_REG_REG_OFFSET_SDIO			(25)
+#define PM_PWR_STA_REG_REG_OFFSET_GPU			(24)
+#define PM_PWR_STA_REG_REG_OFFSET_CIM			(23)
+#define PM_PWR_STA_REG_REG_OFFSET_LCDC			(22)
+#define PM_PWR_STA_REG_REG_OFFSET_I2S			(21)
+#define PM_PWR_STA_REG_REG_OFFSET_RAID			(20)
+#define PM_PWR_STA_REG_REG_OFFSET_SATA			(19)
+#define PM_PWR_STA_REG_REG_OFFSET_PCIE1			(18)
+#define PM_PWR_STA_REG_REG_OFFSET_PCIE0			(17)
+#define PM_PWR_STA_REG_REG_OFFSET_USB_HOST		(16)
+#define PM_PWR_STA_REG_REG_OFFSET_USB_OTG		(15)
+#define PM_PWR_STA_REG_REG_OFFSET_TIMER			(14)
+#define PM_PWR_STA_REG_REG_OFFSET_CRYPTO		(13)
+#define PM_PWR_STA_REG_REG_OFFSET_HCIE			(12)
+#define PM_PWR_STA_REG_REG_OFFSET_SWITCH		(11)
+#define PM_PWR_STA_REG_REG_OFFSET_GPIO			(10)
+#define PM_PWR_STA_REG_REG_OFFSET_UART3			(9)
+#define PM_PWR_STA_REG_REG_OFFSET_UART2			(8)
+#define PM_PWR_STA_REG_REG_OFFSET_UART1			(7)
+#define PM_PWR_STA_REG_REG_OFFSET_RTC			(5)
+#define PM_PWR_STA_REG_REG_OFFSET_GDMA			(4)
+#define PM_PWR_STA_REG_REG_OFFSET_SPI_PCM_I2S		(3)
+#define PM_PWR_STA_REG_REG_OFFSET_DMC			(2)
+#define PM_PWR_STA_REG_REG_OFFSET_SMC_NFI		(1)
+#define PM_PWR_STA_REG_REG_MASK				(0x03FFFFBE)
+
+/* PM_CLK_CTRL_REG */
+#define PM_CLK_CTRL_REG_OFFSET_I2S_MCLK			(31)
+#define PM_CLK_CTRL_REG_OFFSET_DDR2_CHG_EN		(30)
+#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF1_EN		(29)
+#define PM_CLK_CTRL_REG_OFFSET_PCIE_REF0_EN		(28)
+#define PM_CLK_CTRL_REG_OFFSET_TIMER_SIM_MODE		(27)
+#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_DIV		(24)
+#define PM_CLK_CTRL_REG_OFFSET_I2SCLK_SEL		(22)
+#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_DIV		(20)
+#define PM_CLK_CTRL_REG_OFFSET_CLKOUT_SEL		(16)
+#define PM_CLK_CTRL_REG_OFFSET_MDC_DIV			(14)
+#define PM_CLK_CTRL_REG_OFFSET_CRYPTO_CLK_SEL		(12)
+#define PM_CLK_CTRL_REG_OFFSET_CPU_PWR_MODE		(9)
+#define PM_CLK_CTRL_REG_OFFSET_PLL_DDR2_SEL		(7)
+#define PM_CLK_CTRL_REG_OFFSET_DIV_IMMEDIATE		(6)
+#define PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV		(4)
+#define PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL		(0)
+
+#define PM_CPU_CLK_DIV(DIV) { \
+	PM_CLK_CTRL_REG &= ~((0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
+	PM_CLK_CTRL_REG |= (((DIV)&0x3) << PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV); \
+}
+
+#define PM_PLL_CPU_SEL(CPU) { \
+	PM_CLK_CTRL_REG &= ~((0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
+	PM_CLK_CTRL_REG |= (((CPU)&0xF) << PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL); \
+}
+
+/* PM_PLL_LCD_I2S_CTRL_REG */
+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_MCLK_SMC_DIV	(22)
+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_R_SEL		(17)
+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_P	(11)
+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_M	(3)
+#define PM_PLL_LCD_I2S_CTRL_REG_OFFSET_PLL_LCD_S	(0)
+
+/* PM_PLL_HM_PD_CTRL_REG */
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1		(11)
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0		(10)
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2SCD		(6)
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_I2S		(5)
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_LCD		(4)
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB		(3)
+#define PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_RGMII		(2)
+#define PM_PLL_HM_PD_CTRL_REG_MASK			(0x00000C7C)
+
+/* PM_WDT_CTRL_REG */
+#define PM_WDT_CTRL_REG_OFFSET_RESET_CPU_ONLY		(0)
+
+/* PM_CSR_REG - Clock Scaling Register*/
+#define PM_CSR_REG_OFFSET_CSR_EN			(30)
+#define PM_CSR_REG_OFFSET_CSR_NUM			(0)
+
+#define CNS3XXX_PWR_CLK_EN(BLOCK) (0x1<<PM_CLK_GATE_REG_OFFSET_##BLOCK)
+
+/* Software reset*/
+#define CNS3XXX_PWR_SOFTWARE_RST(BLOCK) (0x1<<PM_SOFT_RST_REG_OFFST_##BLOCK)
+
+/*
+ * CNS3XXX support several power saving mode as following,
+ * DFS, IDLE, HALT, DOZE, SLEEP, Hibernate
+ */
+#define CNS3XXX_PWR_CPU_MODE_DFS			(0)
+#define CNS3XXX_PWR_CPU_MODE_IDLE			(1)
+#define CNS3XXX_PWR_CPU_MODE_HALT			(2)
+#define CNS3XXX_PWR_CPU_MODE_DOZE			(3)
+#define CNS3XXX_PWR_CPU_MODE_SLEEP			(4)
+#define CNS3XXX_PWR_CPU_MODE_HIBERNATE			(5)
+
+#define CNS3XXX_PWR_PLL(BLOCK)	(0x1<<PM_PLL_HM_PD_CTRL_REG_OFFSET_##BLOCK)
+#define CNS3XXX_PWR_PLL_ALL	PM_PLL_HM_PD_CTRL_REG_MASK
+
+/* Change CPU frequency and divider */
+#define CNS3XXX_PWR_PLL_CPU_300MHZ			(0)
+#define CNS3XXX_PWR_PLL_CPU_333MHZ			(1)
+#define CNS3XXX_PWR_PLL_CPU_366MHZ			(2)
+#define CNS3XXX_PWR_PLL_CPU_400MHZ			(3)
+#define CNS3XXX_PWR_PLL_CPU_433MHZ			(4)
+#define CNS3XXX_PWR_PLL_CPU_466MHZ			(5)
+#define CNS3XXX_PWR_PLL_CPU_500MHZ			(6)
+#define CNS3XXX_PWR_PLL_CPU_533MHZ			(7)
+#define CNS3XXX_PWR_PLL_CPU_566MHZ			(8)
+#define CNS3XXX_PWR_PLL_CPU_600MHZ			(9)
+#define CNS3XXX_PWR_PLL_CPU_633MHZ			(10)
+#define CNS3XXX_PWR_PLL_CPU_666MHZ			(11)
+#define CNS3XXX_PWR_PLL_CPU_700MHZ			(12)
+
+#define CNS3XXX_PWR_CPU_CLK_DIV_BY1			(0)
+#define CNS3XXX_PWR_CPU_CLK_DIV_BY2			(1)
+#define CNS3XXX_PWR_CPU_CLK_DIV_BY4			(2)
+
+/* Change DDR2 frequency */
+#define CNS3XXX_PWR_PLL_DDR2_200MHZ			(0)
+#define CNS3XXX_PWR_PLL_DDR2_266MHZ			(1)
+#define CNS3XXX_PWR_PLL_DDR2_333MHZ			(2)
+#define CNS3XXX_PWR_PLL_DDR2_400MHZ			(3)
+
+void cns3xxx_pwr_soft_rst(unsigned int block);
+void cns3xxx_pwr_clk_en(unsigned int block);
+int cns3xxx_cpu_clock(void);
+
+/*
+ * ARM11 MPCore interrupt sources (primary GIC)
+ */
+#define IRQ_CNS3XXX_PMU			(IRQ_TC11MP_GIC_START + 0)
+#define IRQ_CNS3XXX_SDIO		(IRQ_TC11MP_GIC_START + 1)
+#define IRQ_CNS3XXX_L2CC		(IRQ_TC11MP_GIC_START + 2)
+#define IRQ_CNS3XXX_RTC			(IRQ_TC11MP_GIC_START + 3)
+#define IRQ_CNS3XXX_I2S			(IRQ_TC11MP_GIC_START + 4)
+#define IRQ_CNS3XXX_PCM			(IRQ_TC11MP_GIC_START + 5)
+#define IRQ_CNS3XXX_SPI			(IRQ_TC11MP_GIC_START + 6)
+#define IRQ_CNS3XXX_I2C			(IRQ_TC11MP_GIC_START + 7)
+#define IRQ_CNS3XXX_CIM			(IRQ_TC11MP_GIC_START + 8)
+#define IRQ_CNS3XXX_GPU			(IRQ_TC11MP_GIC_START + 9)
+#define IRQ_CNS3XXX_LCD			(IRQ_TC11MP_GIC_START + 10)
+#define IRQ_CNS3XXX_GPIOA		(IRQ_TC11MP_GIC_START + 11)
+#define IRQ_CNS3XXX_GPIOB		(IRQ_TC11MP_GIC_START + 12)
+#define IRQ_CNS3XXX_UART0		(IRQ_TC11MP_GIC_START + 13)
+#define IRQ_CNS3XXX_UART1		(IRQ_TC11MP_GIC_START + 14)
+#define IRQ_CNS3XXX_UART2		(IRQ_TC11MP_GIC_START + 15)
+#define IRQ_CNS3XXX_ARM11		(IRQ_TC11MP_GIC_START + 16)
+
+#define IRQ_CNS3XXX_SW_STATUS		(IRQ_TC11MP_GIC_START + 17)
+#define IRQ_CNS3XXX_SW_R0TXC		(IRQ_TC11MP_GIC_START + 18)
+#define IRQ_CNS3XXX_SW_R0RXC		(IRQ_TC11MP_GIC_START + 19)
+#define IRQ_CNS3XXX_SW_R0QE		(IRQ_TC11MP_GIC_START + 20)
+#define IRQ_CNS3XXX_SW_R0QF		(IRQ_TC11MP_GIC_START + 21)
+#define IRQ_CNS3XXX_SW_R1TXC		(IRQ_TC11MP_GIC_START + 22)
+#define IRQ_CNS3XXX_SW_R1RXC		(IRQ_TC11MP_GIC_START + 23)
+#define IRQ_CNS3XXX_SW_R1QE		(IRQ_TC11MP_GIC_START + 24)
+#define IRQ_CNS3XXX_SW_R1QF		(IRQ_TC11MP_GIC_START + 25)
+#define IRQ_CNS3XXX_SW_PPE		(IRQ_TC11MP_GIC_START + 26)
+
+#define IRQ_CNS3XXX_CRYPTO		(IRQ_TC11MP_GIC_START + 27)
+#define IRQ_CNS3XXX_HCIE		(IRQ_TC11MP_GIC_START + 28)
+#define IRQ_CNS3XXX_PCIE0_DEVICE	(IRQ_TC11MP_GIC_START + 29)
+#define IRQ_CNS3XXX_PCIE1_DEVICE	(IRQ_TC11MP_GIC_START + 30)
+#define IRQ_CNS3XXX_USB_OTG		(IRQ_TC11MP_GIC_START + 31)
+#define IRQ_CNS3XXX_USB_EHCI		(IRQ_TC11MP_GIC_START + 32)
+#define IRQ_CNS3XXX_SATA		(IRQ_TC11MP_GIC_START + 33)
+#define IRQ_CNS3XXX_RAID		(IRQ_TC11MP_GIC_START + 34)
+#define IRQ_CNS3XXX_SMC			(IRQ_TC11MP_GIC_START + 35)
+
+#define IRQ_CNS3XXX_DMAC_ABORT		(IRQ_TC11MP_GIC_START + 36)
+#define IRQ_CNS3XXX_DMAC0		(IRQ_TC11MP_GIC_START + 37)
+#define IRQ_CNS3XXX_DMAC1		(IRQ_TC11MP_GIC_START + 38)
+#define IRQ_CNS3XXX_DMAC2		(IRQ_TC11MP_GIC_START + 39)
+#define IRQ_CNS3XXX_DMAC3		(IRQ_TC11MP_GIC_START + 40)
+#define IRQ_CNS3XXX_DMAC4		(IRQ_TC11MP_GIC_START + 41)
+#define IRQ_CNS3XXX_DMAC5		(IRQ_TC11MP_GIC_START + 42)
+#define IRQ_CNS3XXX_DMAC6		(IRQ_TC11MP_GIC_START + 43)
+#define IRQ_CNS3XXX_DMAC7		(IRQ_TC11MP_GIC_START + 44)
+#define IRQ_CNS3XXX_DMAC8		(IRQ_TC11MP_GIC_START + 45)
+#define IRQ_CNS3XXX_DMAC9		(IRQ_TC11MP_GIC_START + 46)
+#define IRQ_CNS3XXX_DMAC10		(IRQ_TC11MP_GIC_START + 47)
+#define IRQ_CNS3XXX_DMAC11		(IRQ_TC11MP_GIC_START + 48)
+#define IRQ_CNS3XXX_DMAC12		(IRQ_TC11MP_GIC_START + 49)
+#define IRQ_CNS3XXX_DMAC13		(IRQ_TC11MP_GIC_START + 50)
+#define IRQ_CNS3XXX_DMAC14		(IRQ_TC11MP_GIC_START + 51)
+#define IRQ_CNS3XXX_DMAC15		(IRQ_TC11MP_GIC_START + 52)
+#define IRQ_CNS3XXX_DMAC16		(IRQ_TC11MP_GIC_START + 53)
+#define IRQ_CNS3XXX_DMAC17		(IRQ_TC11MP_GIC_START + 54)
+
+#define IRQ_CNS3XXX_PCIE0_RC		(IRQ_TC11MP_GIC_START + 55)
+#define IRQ_CNS3XXX_PCIE1_RC		(IRQ_TC11MP_GIC_START + 56)
+#define IRQ_CNS3XXX_TIMER0		(IRQ_TC11MP_GIC_START + 57)
+#define IRQ_CNS3XXX_TIMER1		(IRQ_TC11MP_GIC_START + 58)
+#define IRQ_CNS3XXX_USB_OHCI		(IRQ_TC11MP_GIC_START + 59)
+#define IRQ_CNS3XXX_TIMER2		(IRQ_TC11MP_GIC_START + 60)
+#define IRQ_CNS3XXX_EXTERNAL_PIN0	(IRQ_TC11MP_GIC_START + 61)
+#define IRQ_CNS3XXX_EXTERNAL_PIN1	(IRQ_TC11MP_GIC_START + 62)
+#define IRQ_CNS3XXX_EXTERNAL_PIN2	(IRQ_TC11MP_GIC_START + 63)
+
+#define NR_IRQS_CNS3XXX			(IRQ_TC11MP_GIC_START + 64)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_CNS3XXX)
+#undef NR_IRQS
+#define NR_IRQS				NR_IRQS_CNS3XXX
+#endif
+
+#endif	/* __MACH_BOARD_CNS3XXX_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/debug-macro.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,21 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright 1994-1999 Russell King
+ * Copyright 2008 Cavium Networks
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf0000000	@ virtual base
+		orr	\rx, \rx, #0x00009000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/entry-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/entry-macro.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/entry-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,82 @@
+/*
+ * Low-level IRQ helper macros for Cavium Networks platforms
+ *
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =gic_cpu_base_addr
+		ldr	\base, [\base]
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an interrupt if it's
+		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number of the highest
+                 * priority enabled interrupt.  We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt on the
+		 * controller, since this requires the original irqstat value which
+		 * we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved.. */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/hardware.h linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/hardware.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/hardware.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/hardware.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,22 @@
+/*
+ * This file contains the hardware definitions of the Cavium Networks boards.
+ *
+ * Copyright 2003 ARM Limited.
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/* macro to get at IO space when running virtually */
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0x00000000
+#define pcibios_assign_all_busses()	1
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/io.h linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/io.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/io.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/io.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2008 Cavium Networks
+ * Copyright 2003 ARM Limited
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)			__typesafe_io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/irqs.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2000 Deep Blue Solutions Ltd.
+ * Copyright 2003 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+#define IRQ_LOCALTIMER		29
+#define IRQ_LOCALWDOG		30
+#define IRQ_TC11MP_GIC_START	32
+
+#include <mach/cns3xxx.h>
+
+#ifndef NR_IRQS
+#error "NR_IRQS not defined by the board-specific files"
+#endif
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/memory.h linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/memory.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/memory.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/memory.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2003 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __phys_to_bus(x)	((x) + PHYS_OFFSET)
+#define __bus_to_phys(x)	((x) - PHYS_OFFSET)
+
+#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
+#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
+#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
+#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/system.h linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/system.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/system.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/system.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2003 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+void arch_reset(char mode, const char *cmd);
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/timex.h linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/timex.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/timex.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/timex.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,12 @@
+/*
+ * Cavium Networks architecture timex specifications
+ *
+ * Copyright 2003 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/uncompress.h linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/uncompress.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/uncompress.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/uncompress.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2003 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/cns3xxx.h>
+
+#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
+#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
+#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
+#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
+
+/*
+ * Return the UART base address
+ */
+static inline unsigned long get_uart_base(void)
+{
+	if (machine_is_cns3420vb())
+		return CNS3XXX_UART0_BASE;
+	else
+		return 0;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR(base) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/vmalloc.h linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/vmalloc.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/include/mach/vmalloc.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/include/mach/vmalloc.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,11 @@
+/*
+ * Copyright 2000 Russell King.
+ * Copyright 2003 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#define VMALLOC_END		0xd8000000
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/Kconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,12 @@
+menu "CNS3XXX platform type"
+	depends on ARCH_CNS3XXX
+
+config MACH_CNS3420VB
+	bool "Support for CNS3420 Validation Board"
+	help
+	  Include support for the Cavium Networks CNS3420 MPCore Platform
+	  Baseboard.
+	  This is a platform with an on-board ARM11 MPCore and has support
+	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
+
+endmenu
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/Makefile	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,2 @@
+obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o
+obj-$(CONFIG_MACH_CNS3420VB)		+= cns3420vb.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/Makefile.boot linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/Makefile.boot
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/Makefile.boot	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/Makefile.boot	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00C00000
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/pm.c linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/pm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-cns3xxx/pm.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-cns3xxx/pm.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <mach/system.h>
+#include <mach/cns3xxx.h>
+
+void cns3xxx_pwr_clk_en(unsigned int block)
+{
+	PM_CLK_GATE_REG |= (block & PM_CLK_GATE_REG_MASK);
+}
+
+void cns3xxx_pwr_power_up(unsigned int block)
+{
+	PM_PLL_HM_PD_CTRL_REG &= ~(block & CNS3XXX_PWR_PLL_ALL);
+
+	/* Wait for 300us for the PLL output clock locked. */
+	udelay(300);
+};
+
+void cns3xxx_pwr_power_down(unsigned int block)
+{
+	/* write '1' to power down */
+	PM_PLL_HM_PD_CTRL_REG |= (block & CNS3XXX_PWR_PLL_ALL);
+};
+
+static void cns3xxx_pwr_soft_rst_force(unsigned int block)
+{
+	/*
+	 * bit 0, 28, 29 => program low to reset,
+	 * the other else program low and then high
+	 */
+	if (block & 0x30000001) {
+		PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
+	} else {
+		PM_SOFT_RST_REG &= ~(block & PM_SOFT_RST_REG_MASK);
+		PM_SOFT_RST_REG |= (block & PM_SOFT_RST_REG_MASK);
+	}
+}
+
+void cns3xxx_pwr_soft_rst(unsigned int block)
+{
+	static unsigned int soft_reset;
+
+	if (soft_reset & block) {
+		/* SPI/I2C/GPIO use the same block, reset once. */
+		return;
+	} else {
+		soft_reset |= block;
+	}
+	cns3xxx_pwr_soft_rst_force(block);
+}
+
+void arch_reset(char mode, const char *cmd)
+{
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA.
+	 */
+	cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(GLOBAL));
+}
+
+/*
+ * cns3xxx_cpu_clock - return CPU/L2 clock
+ *  aclk: cpu clock/2
+ *  hclk: cpu clock/4
+ *  pclk: cpu clock/8
+ */
+int cns3xxx_cpu_clock(void)
+{
+	int cpu;
+	int cpu_sel;
+	int div_sel;
+
+	cpu_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_PLL_CPU_SEL) & 0xf;
+	div_sel = (PM_CLK_CTRL_REG >> PM_CLK_CTRL_REG_OFFSET_CPU_CLK_DIV) & 0x3;
+
+	cpu = (300 + ((cpu_sel / 3) * 100) + ((cpu_sel % 3) * 33)) >> div_sel;
+
+	return cpu;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-da830-evm.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-da830-evm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-da830-evm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-da830-evm.c	2010-08-01 18:11:14.000000000 -0400
@@ -33,9 +33,6 @@
 #define DA830_EVM_PHY_MASK		0x0
 #define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
 
-#define DA830_EMIF25_ASYNC_DATA_CE3_BASE	0x62000000
-#define DA830_EMIF25_CONTROL_BASE		0x68000000
-
 /*
  * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
  */
@@ -157,7 +154,7 @@
 				   __func__, ret);
 	}
 
-	ret = da8xx_pinmux_setup(da830_evm_usb11_pins);
+	ret = davinci_cfg_reg_list(da830_evm_usb11_pins);
 	if (ret) {
 		pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
 			   __func__, ret);
@@ -229,15 +226,22 @@
 };
 
 #define DA830_MMCSD_WP_PIN		GPIO_TO_PIN(2, 1)
+#define DA830_MMCSD_CD_PIN		GPIO_TO_PIN(2, 2)
 
 static int da830_evm_mmc_get_ro(int index)
 {
 	return gpio_get_value(DA830_MMCSD_WP_PIN);
 }
 
+static int da830_evm_mmc_get_cd(int index)
+{
+	return !gpio_get_value(DA830_MMCSD_CD_PIN);
+}
+
 static struct davinci_mmc_config da830_evm_mmc_config = {
 	.get_ro			= da830_evm_mmc_get_ro,
-	.wires			= 4,
+	.get_cd			= da830_evm_mmc_get_cd,
+	.wires			= 8,
 	.max_freq		= 50000000,
 	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
 	.version		= MMC_CTLR_VERSION_2,
@@ -247,7 +251,7 @@
 {
 	int ret;
 
-	ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins);
+	ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins);
 	if (ret) {
 		pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n",
 				ret);
@@ -262,6 +266,14 @@
 	}
 	gpio_direction_input(DA830_MMCSD_WP_PIN);
 
+	ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n");
+	if (ret) {
+		pr_warning("da830_evm_init: can not open GPIO %d\n",
+			   DA830_MMCSD_CD_PIN);
+		return;
+	}
+	gpio_direction_input(DA830_MMCSD_CD_PIN);
+
 	ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
 	if (ret) {
 		pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",
@@ -360,13 +372,13 @@
 
 static struct resource da830_evm_nand_resources[] = {
 	[0] = {		/* First memory resource is NAND I/O window */
-		.start	= DA830_EMIF25_ASYNC_DATA_CE3_BASE,
-		.end	= DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1,
+		.start	= DA8XX_AEMIF_CS3_BASE,
+		.end	= DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {		/* Second memory resource is AEMIF control registers */
-		.start	= DA830_EMIF25_CONTROL_BASE,
-		.end	= DA830_EMIF25_CONTROL_BASE + SZ_32K - 1,
+		.start	= DA8XX_AEMIF_CTL_BASE,
+		.end	= DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -392,7 +404,7 @@
 		return;
 	}
 
-	ret = da8xx_pinmux_setup(da830_evm_emif25_pins);
+	ret = davinci_cfg_reg_list(da830_evm_emif25_pins);
 	if (ret)
 		pr_warning("da830_evm_init: emif25 mux setup failed: %d\n",
 				ret);
@@ -412,7 +424,7 @@
 {
 	int ret;
 
-	ret = da8xx_pinmux_setup(da830_lcdcntl_pins);
+	ret = davinci_cfg_reg_list(da830_lcdcntl_pins);
 	if (ret)
 		pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n",
 				ret);
@@ -492,7 +504,7 @@
 		pr_warning("da830_evm_init: edma registration failed: %d\n",
 				ret);
 
-	ret = da8xx_pinmux_setup(da830_i2c0_pins);
+	ret = davinci_cfg_reg_list(da830_i2c0_pins);
 	if (ret)
 		pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
 				ret);
@@ -508,7 +520,7 @@
 	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
 	soc_info->emac_pdata->rmii_en = 1;
 
-	ret = da8xx_pinmux_setup(da830_cpgmac_pins);
+	ret = davinci_cfg_reg_list(da830_cpgmac_pins);
 	if (ret)
 		pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
 				ret);
@@ -527,7 +539,7 @@
 	i2c_register_board_info(1, da830_evm_i2c_devices,
 			ARRAY_SIZE(da830_evm_i2c_devices));
 
-	ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins);
+	ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins);
 	if (ret)
 		pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
 				ret);
@@ -549,14 +561,6 @@
 console_initcall(da830_evm_console_init);
 #endif
 
-static __init void da830_evm_irq_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA830_N_CP_INTC_IRQ,
-			soc_info->intc_irq_prios);
-}
-
 static void __init da830_evm_map_io(void)
 {
 	da830_init();
@@ -567,7 +571,7 @@
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
 	.map_io		= da830_evm_map_io,
-	.init_irq	= da830_evm_irq_init,
+	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= da830_evm_init,
 MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-da850-evm.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-da850-evm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-da850-evm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-da850-evm.c	2010-08-01 18:11:14.000000000 -0400
@@ -17,6 +17,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/mfd/tps6507x.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
@@ -24,6 +25,9 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/tps6507x.h>
+#include <linux/mfd/tps6507x.h>
+#include <linux/input/tps6507x-ts.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -206,12 +210,12 @@
 	int ret = 0;
 
 	if (ui_card_detected & !HAS_MMC) {
-		ret = da8xx_pinmux_setup(da850_nand_pins);
+		ret = davinci_cfg_reg_list(da850_nand_pins);
 		if (ret)
 			pr_warning("da850_evm_init: nand mux setup failed: "
 					"%d\n", ret);
 
-		ret = da8xx_pinmux_setup(da850_nor_pins);
+		ret = davinci_cfg_reg_list(da850_nor_pins);
 		if (ret)
 			pr_warning("da850_evm_init: nor mux setup failed: %d\n",
 				ret);
@@ -466,6 +470,11 @@
 	},
 };
 
+/* We take advantage of the fact that both defdcdc{2,3} are tied high */
+static struct tps6507x_reg_platform_data tps6507x_platform_data = {
+	.defdcdc_default = true,
+};
+
 struct regulator_init_data tps65070_regulator_data[] = {
 	/* dcdc1 */
 	{
@@ -491,6 +500,7 @@
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
 		.consumer_supplies = tps65070_dcdc2_consumers,
+		.driver_data = &tps6507x_platform_data,
 	},
 
 	/* dcdc3 */
@@ -504,6 +514,7 @@
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
 		.consumer_supplies = tps65070_dcdc3_consumers,
+		.driver_data = &tps6507x_platform_data,
 	},
 
 	/* ldo1 */
@@ -533,10 +544,24 @@
 	},
 };
 
+static struct touchscreen_init_data tps6507x_touchscreen_data = {
+	.poll_period =  30,	/* ms between touch samples */
+	.min_pressure = 0x30,	/* minimum pressure to trigger touch */
+	.vref = 0,		/* turn off vref when not using A/D */
+	.vendor = 0,		/* /sys/class/input/input?/id/vendor */
+	.product = 65070,	/* /sys/class/input/input?/id/product */
+	.version = 0x100,	/* /sys/class/input/input?/id/version */
+};
+
+static struct tps6507x_board tps_board = {
+	.tps6507x_pmic_init_data = &tps65070_regulator_data[0],
+	.tps6507x_ts_init_data = &tps6507x_touchscreen_data,
+};
+
 static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
 	{
 		I2C_BOARD_INFO("tps6507x", 0x48),
-		.platform_data = &tps65070_regulator_data[0],
+		.platform_data = &tps_board,
 	},
 };
 
@@ -568,12 +593,12 @@
 
 	if (rmii_en) {
 		val |= BIT(8);
-		ret = da8xx_pinmux_setup(da850_rmii_pins);
+		ret = davinci_cfg_reg_list(da850_rmii_pins);
 		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
 							" functional\n");
 	} else {
 		val &= ~BIT(8);
-		ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+		ret = davinci_cfg_reg_list(da850_cpgmac_pins);
 		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
 							" functional\n");
 	}
@@ -626,7 +651,7 @@
 		pr_warning("da850_evm_init: edma registration failed: %d\n",
 				ret);
 
-	ret = da8xx_pinmux_setup(da850_i2c0_pins);
+	ret = davinci_cfg_reg_list(da850_i2c0_pins);
 	if (ret)
 		pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
 				ret);
@@ -643,7 +668,7 @@
 				ret);
 
 	if (HAS_MMC) {
-		ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
+		ret = davinci_cfg_reg_list(da850_mmcsd0_pins);
 		if (ret)
 			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
 					" %d\n", ret);
@@ -679,20 +704,20 @@
 	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
 	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
 
-	ret = da8xx_pinmux_setup(da850_mcasp_pins);
+	ret = davinci_cfg_reg_list(da850_mcasp_pins);
 	if (ret)
 		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
 				ret);
 
 	da8xx_register_mcasp(0, &da850_evm_snd_data);
 
-	ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
+	ret = davinci_cfg_reg_list(da850_lcdcntl_pins);
 	if (ret)
 		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
 				ret);
 
 	/* Handle board specific muxing for LCD here */
-	ret = da8xx_pinmux_setup(da850_evm_lcdc_pins);
+	ret = davinci_cfg_reg_list(da850_evm_lcdc_pins);
 	if (ret)
 		pr_warning("da850_evm_init: evm specific lcd mux setup "
 				"failed: %d\n",	ret);
@@ -736,14 +761,6 @@
 console_initcall(da850_evm_console_init);
 #endif
 
-static __init void da850_evm_irq_init(void)
-{
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
-			soc_info->intc_irq_prios);
-}
-
 static void __init da850_evm_map_io(void)
 {
 	da850_init();
@@ -754,7 +771,7 @@
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
 	.map_io		= da850_evm_map_io,
-	.init_irq	= da850_evm_irq_init,
+	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
 	.init_machine	= da850_evm_init,
 MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-dm355-evm.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-dm355-evm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-dm355-evm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-dm355-evm.c	2010-08-01 18:11:14.000000000 -0400
@@ -33,9 +33,6 @@
 #include <mach/mmc.h>
 #include <mach/usb.h>
 
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-
 /* NOTE:  this is geared for the standard config, with a socketed
  * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
  * swap chips, maybe with a different block size, partitioning may
@@ -86,12 +83,12 @@
 
 static struct resource davinci_nand_resources[] = {
 	{
-		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -353,17 +350,12 @@
 	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
 }
 
-static __init void dm355_evm_irq_init(void)
-{
-	davinci_irq_init();
-}
-
 MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
 	.phys_io      = IO_PHYS,
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io	      = dm355_evm_map_io,
-	.init_irq     = dm355_evm_irq_init,
+	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_evm_init,
 MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-dm355-leopard.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-dm355-leopard.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-dm355-leopard.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-dm355-leopard.c	2010-08-01 18:11:14.000000000 -0400
@@ -30,9 +30,6 @@
 #include <mach/mmc.h>
 #include <mach/usb.h>
 
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-
 /* NOTE:  this is geared for the standard config, with a socketed
  * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors.  If you
  * swap chips, maybe with a different block size, partitioning may
@@ -82,12 +79,12 @@
 
 static struct resource davinci_nand_resources[] = {
 	{
-		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.start		= DM355_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM355_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.start		= DM355_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM355_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -272,17 +269,12 @@
 			ARRAY_SIZE(dm355_leopard_spi_info));
 }
 
-static __init void dm355_leopard_irq_init(void)
-{
-	davinci_irq_init();
-}
-
 MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
 	.phys_io      = IO_PHYS,
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io	      = dm355_leopard_map_io,
-	.init_irq     = dm355_leopard_irq_init,
+	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_leopard_init,
 MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-dm365-evm.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-dm365-evm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-dm365-evm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-dm365-evm.c	2010-08-01 18:11:14.000000000 -0400
@@ -54,11 +54,6 @@
 	return 0;
 }
 
-
-#define DM365_ASYNC_EMIF_CONTROL_BASE	0x01d10000
-#define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
-#define DM365_ASYNC_EMIF_DATA_CE1_BASE	0x04000000
-
 #define DM365_EVM_PHY_MASK		(0x2)
 #define DM365_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
@@ -605,7 +600,11 @@
 	/* maybe setup mmc1/etc ... _after_ mmc0 */
 	evm_init_cpld();
 
+#ifdef CONFIG_SND_DM365_AIC3X_CODEC
 	dm365_init_asp(&dm365_evm_snd_data);
+#elif defined(CONFIG_SND_DM365_VOICE_CODEC)
+	dm365_init_vc(&dm365_evm_snd_data);
+#endif
 	dm365_init_rtc();
 	dm365_init_ks(&dm365evm_ks_data);
 
@@ -613,17 +612,12 @@
 			ARRAY_SIZE(dm365_evm_spi_info));
 }
 
-static __init void dm365_evm_irq_init(void)
-{
-	davinci_irq_init();
-}
-
 MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
 	.phys_io	= IO_PHYS,
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (0x80000100),
 	.map_io		= dm365_evm_map_io,
-	.init_irq	= dm365_evm_irq_init,
+	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
 	.init_machine	= dm365_evm_init,
 MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-dm644x-evm.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-dm644x-evm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-dm644x-evm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-dm644x-evm.c	2010-08-01 18:11:14.000000000 -0400
@@ -41,14 +41,6 @@
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
-#define DAVINCI_CFC_ATA_BASE		  0x01C66000
-
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
-#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE  0x04000000
-#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE  0x06000000
-#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE  0x08000000
-
 #define LXT971_PHY_ID	(0x001378e2)
 #define LXT971_PHY_MASK	(0xfffffff0)
 
@@ -92,8 +84,8 @@
 /* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
  * limits addresses to 16M, so using addresses past 16M will wrap */
 static struct resource davinci_evm_norflash_resource = {
-	.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-	.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+	.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
+	.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -111,7 +103,7 @@
  * It may used instead of the (default) NOR chip to boot, using TI's
  * tools to install the secondary boot loader (UBL) and U-Boot.
  */
-struct mtd_partition davinci_evm_nandflash_partition[] = {
+static struct mtd_partition davinci_evm_nandflash_partition[] = {
 	/* Bootloader layout depends on whose u-boot is installed, but we
 	 * can hide all the details.
 	 *  - block 0 for u-boot environment ... in mainline u-boot
@@ -154,12 +146,12 @@
 
 static struct resource davinci_evm_nandflash_resource[] = {
 	{
-		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -258,32 +250,6 @@
 	.id             = -1,
 };
 
-static struct resource ide_resources[] = {
-	{
-		.start          = DAVINCI_CFC_ATA_BASE,
-		.end            = DAVINCI_CFC_ATA_BASE + 0x7ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		.start          = IRQ_IDE,
-		.end            = IRQ_IDE,
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_dev = {
-	.name           = "palm_bk3710",
-	.id             = -1,
-	.resource       = ide_resources,
-	.num_resources  = ARRAY_SIZE(ide_resources),
-	.dev = {
-		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
 static struct snd_platform_data dm644x_evm_snd_data;
 
 /*----------------------------------------------------------------------*/
@@ -704,10 +670,7 @@
 			pr_warning("WARNING: both IDE and Flash are "
 				"enabled, but they share AEMIF pins.\n"
 				"\tDisable IDE for NAND/NOR support.\n");
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN);
-		davinci_cfg_reg(DM644X_HDIREN);
-		platform_device_register(&ide_dev);
+		davinci_init_ide();
 	} else if (HAS_NAND || HAS_NOR) {
 		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
 		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
@@ -741,18 +704,13 @@
 
 }
 
-static __init void davinci_evm_irq_init(void)
-{
-	davinci_irq_init();
-}
-
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	/* Maintainer: MontaVista Software <source@mvista.com> */
 	.phys_io      = IO_PHYS,
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
 	.map_io	      = davinci_evm_map_io,
-	.init_irq     = davinci_evm_irq_init,
+	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_evm_init,
 MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-dm646x-evm.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-dm646x-evm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-dm646x-evm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-dm646x-evm.c	2010-08-01 18:11:14.000000000 -0400
@@ -80,17 +80,14 @@
 	.options		= 0,
 };
 
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x20008000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x42000000
-
 static struct resource davinci_nand_resources[] = {
 	{
-		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.start		= DM646X_ASYNC_EMIF_CS2_SPACE_BASE,
+		.end		= DM646X_ASYNC_EMIF_CS2_SPACE_BASE + SZ_32M - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.start		= DM646X_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM646X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -736,17 +733,12 @@
 	platform_device_register(&davinci_nand_device);
 
 	if (HAS_ATA)
-		dm646x_init_ide();
+		davinci_init_ide();
 
 	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
 }
 
-static __init void davinci_dm646x_evm_irq_init(void)
-{
-	davinci_irq_init();
-}
-
 #define DM646X_EVM_REF_FREQ		27000000
 #define DM6467T_EVM_REF_FREQ		33000000
 
@@ -763,7 +755,7 @@
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io       = davinci_map_io,
-	.init_irq     = davinci_dm646x_evm_irq_init,
+	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
 MACHINE_END
@@ -773,7 +765,7 @@
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (0x80000100),
 	.map_io       = davinci_map_io,
-	.init_irq     = davinci_dm646x_evm_irq_init,
+	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
 MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-neuros-osd2.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-neuros-osd2.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-neuros-osd2.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-neuros-osd2.c	2010-08-01 18:11:14.000000000 -0400
@@ -31,6 +31,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/dm644x.h>
+#include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
@@ -41,11 +42,6 @@
 #define NEUROS_OSD2_PHY_MASK		0x2
 #define NEUROS_OSD2_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
 
-#define DAVINCI_CFC_ATA_BASE		 0x01C66000
-
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE	 0x01e00000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
-
 #define LXT971_PHY_ID			0x001378e2
 #define LXT971_PHY_MASK			0xfffffff0
 
@@ -60,7 +56,7 @@
 
 #define NAND_BLOCK_SIZE		SZ_128K
 
-struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
+static struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
 	{
 		/* UBL (a few copies) plus U-Boot */
 		.name		= "bootloader",
@@ -98,12 +94,12 @@
 
 static struct resource davinci_ntosd2_nandflash_resource[] = {
 	{
-		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -130,32 +126,6 @@
 	.num_resources = 0,
 };
 
-static struct resource ide_resources[] = {
-	{
-		.start		= DAVINCI_CFC_ATA_BASE,
-		.end		= DAVINCI_CFC_ATA_BASE + 0x7ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_IDE,
-		.end		= IRQ_IDE,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_dev = {
-	.name		= "palm_bk3710",
-	.id		= -1,
-	.resource	= ide_resources,
-	.num_resources	= ARRAY_SIZE(ide_resources),
-	.dev = {
-		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
 static struct snd_platform_data dm644x_ntosd2_snd_data;
 
 static struct gpio_led ntosd2_leds[] = {
@@ -259,10 +229,7 @@
 			pr_warning("WARNING: both IDE and Flash are "
 				"enabled, but they share AEMIF pins.\n"
 				"\tDisable IDE for NAND/NOR support.\n");
-		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
-		davinci_cfg_reg(DM644X_ATAEN);
-		davinci_cfg_reg(DM644X_HDIREN);
-		platform_device_register(&ide_dev);
+		davinci_init_ide();
 	} else if (HAS_NAND) {
 		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
 		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
@@ -306,18 +273,13 @@
 	davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
 }
 
-static __init void davinci_ntosd2_irq_init(void)
-{
-	davinci_irq_init();
-}
-
 MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
 	.phys_io	= IO_PHYS,
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DAVINCI_DDR_BASE + 0x100),
 	.map_io		 = davinci_ntosd2_map_io,
-	.init_irq	= davinci_ntosd2_irq_init,
+	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
 	.init_machine = davinci_ntosd2_init,
 MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-sffsdr.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-sffsdr.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/board-sffsdr.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/board-sffsdr.c	2010-08-01 18:11:14.000000000 -0400
@@ -45,10 +45,7 @@
 #define SFFSDR_PHY_MASK		(0x2)
 #define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
-#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
-
-struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
+static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
 	/* U-Boot Environment: Block 0
 	 * UBL:                Block 1
 	 * U-Boot:             Blocks 6-7 (256 kb)
@@ -76,12 +73,12 @@
 
 static struct resource davinci_sffsdr_nandflash_resource[] = {
 	{
-		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.start		= DM644X_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DM644X_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
-		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.start		= DM644X_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DM644X_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 };
@@ -155,18 +152,13 @@
 	davinci_cfg_reg(DM644X_VLYNQWD);
 }
 
-static __init void davinci_sffsdr_irq_init(void)
-{
-	davinci_irq_init();
-}
-
 MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
 	.phys_io      = IO_PHYS,
 	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
 	.map_io	      = davinci_sffsdr_map_io,
-	.init_irq     = davinci_sffsdr_irq_init,
+	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_sffsdr_init,
 MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/cdce949.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/cdce949.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/cdce949.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/cdce949.c	2010-08-01 18:11:14.000000000 -0400
@@ -19,6 +19,7 @@
 #include <linux/i2c.h>
 
 #include <mach/clock.h>
+#include <mach/cdce949.h>
 
 #include "clock.h"
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -22,6 +22,7 @@
 
 #include <mach/hardware.h>
 
+#include <mach/clock.h>
 #include <mach/psc.h>
 #include <mach/cputype.h>
 #include "clock.h"
@@ -42,7 +43,8 @@
 	if (clk->parent)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 1);
+		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
+				PSC_STATE_ENABLE);
 }
 
 static void __clk_disable(struct clk *clk)
@@ -51,7 +53,9 @@
 		return;
 	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
 	    (clk->flags & CLK_PSC))
-		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 0);
+		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
+				(clk->flags & PSC_SWRSTDISABLE) ?
+				PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
@@ -233,7 +237,10 @@
 			continue;
 
 		pr_info("Clocks: disable unused %s\n", ck->name);
-		davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, 0);
+
+		davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc,
+				(ck->flags & PSC_SWRSTDISABLE) ?
+				PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE);
 	}
 	spin_unlock_irq(&clockfw_lock);
 
@@ -272,7 +279,7 @@
 
 	v = __raw_readl(pll->base + clk->div_reg);
 	if (v & PLLDIV_EN) {
-		plldiv = (v & PLLDIV_RATIO_MASK) + 1;
+		plldiv = (v & pll->div_ratio_mask) + 1;
 		if (plldiv)
 			rate /= plldiv;
 	}
@@ -295,7 +302,6 @@
 	struct pll_data *pll = clk->pll_data;
 	unsigned long rate = clk->rate;
 
-	pll->base = IO_ADDRESS(pll->phys_base);
 	ctrl = __raw_readl(pll->base + PLLCTL);
 	rate = pll->input_rate = clk->parent->rate;
 
@@ -312,7 +318,7 @@
 	if (pll->flags & PLL_HAS_PREDIV) {
 		prediv = __raw_readl(pll->base + PREDIV);
 		if (prediv & PLLDIV_EN)
-			prediv = (prediv & PLLDIV_RATIO_MASK) + 1;
+			prediv = (prediv & pll->div_ratio_mask) + 1;
 		else
 			prediv = 1;
 	}
@@ -324,7 +330,7 @@
 	if (pll->flags & PLL_HAS_POSTDIV) {
 		postdiv = __raw_readl(pll->base + POSTDIV);
 		if (postdiv & PLLDIV_EN)
-			postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1;
+			postdiv = (postdiv & pll->div_ratio_mask) + 1;
 		else
 			postdiv = 1;
 	}
@@ -451,6 +457,18 @@
 				clk->recalc = clk_leafclk_recalc;
 		}
 
+		if (clk->pll_data) {
+			struct pll_data *pll = clk->pll_data;
+
+			if (!pll->div_ratio_mask)
+				pll->div_ratio_mask = PLLDIV_RATIO_MASK;
+
+			if (pll->phys_base && !pll->base) {
+				pll->base = ioremap(pll->phys_base, SZ_4K);
+				WARN_ON(!pll->base);
+			}
+		}
+
 		if (clk->recalc)
 			clk->rate = clk->recalc(clk);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/clock.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -76,6 +76,7 @@
 	u32 num;
 	u32 flags;
 	u32 input_rate;
+	u32 div_ratio_mask;
 };
 #define PLL_HAS_PREDIV          0x01
 #define PLL_HAS_POSTDIV         0x02
@@ -101,10 +102,11 @@
 
 /* Clock flags: SoC-specific flags start at BIT(16) */
 #define ALWAYS_ENABLED		BIT(1)
-#define CLK_PSC                 BIT(2)
-#define PSC_DSP                 BIT(3) /* PSC uses DSP domain, not ARM */
+#define CLK_PSC			BIT(2)
+#define PSC_DSP			BIT(3) /* PSC uses DSP domain, not ARM */
 #define CLK_PLL			BIT(4) /* PLL-derived clock */
-#define PRE_PLL                 BIT(5) /* source is before PLL mult/div */
+#define PRE_PLL			BIT(5) /* source is before PLL mult/div */
+#define PSC_SWRSTDISABLE	BIT(6) /* Disable state is SwRstDisable */
 
 #define CLK(dev, con, ck) 	\
 	{			\
@@ -118,6 +120,7 @@
 				unsigned int mult, unsigned int postdiv);
 
 extern struct platform_device davinci_wdt_device;
+extern void davinci_watchdog_reset(struct platform_device *);
 
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/common.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/common.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/common.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/common.c	2010-08-01 18:11:14.000000000 -0400
@@ -37,26 +37,43 @@
 		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
 }
 
-static struct davinci_id * __init davinci_get_id(u32 jtag_id)
+static int __init davinci_init_id(struct davinci_soc_info *soc_info)
 {
-	int i;
-	struct davinci_id *dip;
-	u8 variant = (jtag_id & 0xf0000000) >> 28;
-	u16 part_no = (jtag_id & 0x0ffff000) >> 12;
+	int			i;
+	struct davinci_id	*dip;
+	u8			variant;
+	u16			part_no;
+	void __iomem		*base;
 
-	for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num;
+	base = ioremap(soc_info->jtag_id_reg, SZ_4K);
+	if (!base) {
+		pr_err("Unable to map JTAG ID register\n");
+		return -ENOMEM;
+	}
+
+	soc_info->jtag_id = __raw_readl(base);
+	iounmap(base);
+
+	variant = (soc_info->jtag_id & 0xf0000000) >> 28;
+	part_no = (soc_info->jtag_id & 0x0ffff000) >> 12;
+
+	for (i = 0, dip = soc_info->ids; i < soc_info->ids_num;
 			i++, dip++)
 		/* Don't care about the manufacturer right now */
-		if ((dip->part_no == part_no) && (dip->variant == variant))
-			return dip;
+		if ((dip->part_no == part_no) && (dip->variant == variant)) {
+			soc_info->cpu_id = dip->cpu_id;
+			pr_info("DaVinci %s variant 0x%x\n", dip->name,
+					dip->variant);
+			return 0;
+		}
 
-	return NULL;
+	pr_err("Unknown DaVinci JTAG ID 0x%x\n", soc_info->jtag_id);
+	return -EINVAL;
 }
 
 void __init davinci_common_init(struct davinci_soc_info *soc_info)
 {
 	int ret;
-	struct davinci_id *dip;
 
 	if (!soc_info) {
 		ret = -EINVAL;
@@ -77,22 +94,16 @@
 	local_flush_tlb_all();
 	flush_cache_all();
 
+	if (!davinci_soc_info.reset)
+		davinci_soc_info.reset = davinci_watchdog_reset;
+
 	/*
 	 * We want to check CPU revision early for cpu_is_xxxx() macros.
 	 * IO space mapping must be initialized before we can do that.
 	 */
-	davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base);
-
-	dip = davinci_get_id(davinci_soc_info.jtag_id);
-	if (!dip) {
-		ret = -EINVAL;
-		pr_err("Unknown DaVinci JTAG ID 0x%x\n",
-						davinci_soc_info.jtag_id);
+	ret = davinci_init_id(&davinci_soc_info);
+	if (ret < 0)
 		goto err;
-	}
-
-	davinci_soc_info.cpu_id = dip->cpu_id;
-	pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant);
 
 	if (davinci_soc_info.cpu_clks) {
 		ret = davinci_clk_init(davinci_soc_info.cpu_clks);
@@ -101,8 +112,6 @@
 			goto err;
 	}
 
-	davinci_intc_base = davinci_soc_info.intc_base;
-	davinci_intc_type = davinci_soc_info.intc_type;
 	return;
 
 err:
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/cp_intc.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/cp_intc.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/cp_intc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/cp_intc.c	2010-08-01 18:11:14.000000000 -0400
@@ -13,18 +13,17 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
+#include <mach/common.h>
 #include <mach/cp_intc.h>
 
-static void __iomem *cp_intc_base;
-
 static inline unsigned int cp_intc_read(unsigned offset)
 {
-	return __raw_readl(cp_intc_base + offset);
+	return __raw_readl(davinci_intc_base + offset);
 }
 
 static inline void cp_intc_write(unsigned long value, unsigned offset)
 {
-	__raw_writel(value, cp_intc_base + offset);
+	__raw_writel(value, davinci_intc_base + offset);
 }
 
 static void cp_intc_ack_irq(unsigned int irq)
@@ -100,13 +99,18 @@
 	.set_wake	= cp_intc_set_wake,
 };
 
-void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
-			 u8 *irq_prio)
+void __init cp_intc_init(void)
 {
+	unsigned long num_irq	= davinci_soc_info.intc_irq_num;
+	u8 *irq_prio		= davinci_soc_info.intc_irq_prios;
+	u32 *host_map		= davinci_soc_info.intc_host_map;
 	unsigned num_reg	= BITS_TO_LONGS(num_irq);
 	int i;
 
-	cp_intc_base = base;
+	davinci_intc_type = DAVINCI_INTC_TYPE_CP_INTC;
+	davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K);
+	if (WARN_ON(!davinci_intc_base))
+		return;
 
 	cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
 
@@ -157,6 +161,10 @@
 			cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
 	}
 
+	if (host_map)
+		for (i = 0; host_map[i] != -1; i++)
+			cp_intc_write(host_map[i], CP_INTC_HOST_MAP(i));
+
 	/* Set up genirq dispatching for cp_intc */
 	for (i = 0; i < num_irq; i++) {
 		set_irq_chip(i, &cp_intc_irq_chip);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/da830.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/da830.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/da830.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/da830.c	2010-08-01 18:11:14.000000000 -0400
@@ -19,6 +19,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
+#include <mach/gpio.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -1126,10 +1127,7 @@
 	},
 };
 
-static void __iomem *da830_psc_bases[] = {
-	IO_ADDRESS(DA8XX_PSC0_BASE),
-	IO_ADDRESS(DA8XX_PSC1_BASE),
-};
+static u32 da830_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE };
 
 /* Contents of JTAG ID register used to identify exact cpu type */
 static struct davinci_id da830_ids[] = {
@@ -1158,14 +1156,14 @@
 
 static struct davinci_timer_instance da830_timer_instance[2] = {
 	{
-		.base		= IO_ADDRESS(DA8XX_TIMER64P0_BASE),
+		.base		= DA8XX_TIMER64P0_BASE,
 		.bottom_irq	= IRQ_DA8XX_TINT12_0,
 		.top_irq	= IRQ_DA8XX_TINT34_0,
 		.cmp_off	= DA830_CMP12_0,
 		.cmp_irq	= IRQ_DA830_T12CMPINT0_0,
 	},
 	{
-		.base		= IO_ADDRESS(DA8XX_TIMER64P1_BASE),
+		.base		= DA8XX_TIMER64P1_BASE,
 		.bottom_irq	= IRQ_DA8XX_TINT12_1,
 		.top_irq	= IRQ_DA8XX_TINT34_1,
 		.cmp_off	= DA830_CMP12_0,
@@ -1187,34 +1185,33 @@
 static struct davinci_soc_info davinci_soc_info_da830 = {
 	.io_desc		= da830_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
+	.jtag_id_reg		= DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
 	.ids			= da830_ids,
 	.ids_num		= ARRAY_SIZE(da830_ids),
 	.cpu_clks		= da830_clks,
 	.psc_bases		= da830_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(da830_psc_bases),
+	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
 	.pinmux_pins		= da830_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
-	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
+	.intc_base		= DA8XX_CP_INTC_BASE,
 	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
 	.intc_irq_prios		= da830_default_priorities,
 	.intc_irq_num		= DA830_N_CP_INTC_IRQ,
 	.timer_info		= &da830_timer_info,
-	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
+	.gpio_type		= GPIO_TYPE_DAVINCI,
+	.gpio_base		= DA8XX_GPIO_BASE,
 	.gpio_num		= 128,
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
+	.reset_device		= &da8xx_wdt_device,
 };
 
 void __init da830_init(void)
 {
-	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
-	if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module"))
-		return;
-
-	davinci_soc_info_da830.jtag_id_base =
-					DA8XX_SYSCFG0_VIRT(DA8XX_JTAG_ID_REG);
-	davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG0_VIRT(0x120);
-
 	davinci_common_init(&davinci_soc_info_da830);
+
+	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
+	WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/da850.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/da850.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/da850.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/da850.c	2010-08-01 18:11:14.000000000 -0400
@@ -27,6 +27,7 @@
 #include <mach/da8xx.h>
 #include <mach/cpufreq.h>
 #include <mach/pm.h>
+#include <mach/gpio.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -781,10 +782,7 @@
 	},
 };
 
-static void __iomem *da850_psc_bases[] = {
-	IO_ADDRESS(DA8XX_PSC0_BASE),
-	IO_ADDRESS(DA8XX_PSC1_BASE),
-};
+static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE };
 
 /* Contents of JTAG ID register used to identify exact cpu type */
 static struct davinci_id da850_ids[] = {
@@ -799,22 +797,22 @@
 
 static struct davinci_timer_instance da850_timer_instance[4] = {
 	{
-		.base		= IO_ADDRESS(DA8XX_TIMER64P0_BASE),
+		.base		= DA8XX_TIMER64P0_BASE,
 		.bottom_irq	= IRQ_DA8XX_TINT12_0,
 		.top_irq	= IRQ_DA8XX_TINT34_0,
 	},
 	{
-		.base		= IO_ADDRESS(DA8XX_TIMER64P1_BASE),
+		.base		= DA8XX_TIMER64P1_BASE,
 		.bottom_irq	= IRQ_DA8XX_TINT12_1,
 		.top_irq	= IRQ_DA8XX_TINT34_1,
 	},
 	{
-		.base		= IO_ADDRESS(DA850_TIMER64P2_BASE),
+		.base		= DA850_TIMER64P2_BASE,
 		.bottom_irq	= IRQ_DA850_TINT12_2,
 		.top_irq	= IRQ_DA850_TINT34_2,
 	},
 	{
-		.base		= IO_ADDRESS(DA850_TIMER64P3_BASE),
+		.base		= DA850_TIMER64P3_BASE,
 		.bottom_irq	= IRQ_DA850_TINT12_3,
 		.top_irq	= IRQ_DA850_TINT34_3,
 	},
@@ -1072,31 +1070,37 @@
 static struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
+	.jtag_id_reg		= DA8XX_SYSCFG0_BASE + DA8XX_JTAG_ID_REG,
 	.ids			= da850_ids,
 	.ids_num		= ARRAY_SIZE(da850_ids),
 	.cpu_clks		= da850_clks,
 	.psc_bases		= da850_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(da850_psc_bases),
+	.pinmux_base		= DA8XX_SYSCFG0_BASE + 0x120,
 	.pinmux_pins		= da850_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da850_pins),
-	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
+	.intc_base		= DA8XX_CP_INTC_BASE,
 	.intc_type		= DAVINCI_INTC_TYPE_CP_INTC,
 	.intc_irq_prios		= da850_default_priorities,
 	.intc_irq_num		= DA850_N_CP_INTC_IRQ,
 	.timer_info		= &da850_timer_info,
-	.gpio_base		= IO_ADDRESS(DA8XX_GPIO_BASE),
+	.gpio_type		= GPIO_TYPE_DAVINCI,
+	.gpio_base		= DA8XX_GPIO_BASE,
 	.gpio_num		= 144,
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_ARM_RAM_BASE,
 	.sram_len		= SZ_8K,
+	.reset_device		= &da8xx_wdt_device,
 };
 
 void __init da850_init(void)
 {
 	unsigned int v;
 
+	davinci_common_init(&davinci_soc_info_da850);
+
 	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
 	if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module"))
 		return;
@@ -1105,12 +1109,6 @@
 	if (WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module"))
 		return;
 
-	davinci_soc_info_da850.jtag_id_base =
-					DA8XX_SYSCFG0_VIRT(DA8XX_JTAG_ID_REG);
-	davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG0_VIRT(0x120);
-
-	davinci_common_init(&davinci_soc_info_da850);
-
 	/*
 	 * Move the clock source of Async3 domain to PLL1 SYSCLK2.
 	 * This helps keeping the peripherals on this domain insulated
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/devices.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/devices.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/devices.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/devices.c	2010-08-01 18:11:14.000000000 -0400
@@ -23,7 +23,10 @@
 #include <mach/mmc.h>
 #include <mach/time.h>
 
+#include "clock.h"
+
 #define DAVINCI_I2C_BASE	     0x01C21000
+#define DAVINCI_ATA_BASE	     0x01C66000
 #define DAVINCI_MMCSD0_BASE	     0x01E10000
 #define DM355_MMCSD0_BASE	     0x01E11000
 #define DM355_MMCSD1_BASE	     0x01E00000
@@ -58,6 +61,49 @@
 	(void) platform_device_register(&davinci_i2c_device);
 }
 
+static struct resource ide_resources[] = {
+	{
+		.start		= DAVINCI_ATA_BASE,
+		.end		= DAVINCI_ATA_BASE + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IRQ_IDE,
+		.end		= IRQ_IDE,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ide_device = {
+	.name           = "palm_bk3710",
+	.id             = -1,
+	.resource       = ide_resources,
+	.num_resources  = ARRAY_SIZE(ide_resources),
+	.dev = {
+		.dma_mask		= &ide_dma_mask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+};
+
+void __init davinci_init_ide(void)
+{
+	if (cpu_is_davinci_dm644x()) {
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN);
+		davinci_cfg_reg(DM644X_HDIREN);
+	} else if (cpu_is_davinci_dm646x()) {
+		/* IRQ_DM646X_IDE is the same as IRQ_IDE */
+		davinci_cfg_reg(DM646X_ATAEN);
+	} else {
+		WARN_ON(1);
+		return;
+	}
+
+	platform_device_register(&ide_device);
+}
+
 #if	defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
 
 static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
@@ -251,12 +297,12 @@
 
 struct davinci_timer_instance davinci_timer_instance[2] = {
 	{
-		.base		= IO_ADDRESS(DAVINCI_TIMER0_BASE),
+		.base		= DAVINCI_TIMER0_BASE,
 		.bottom_irq	= IRQ_TINT0_TINT12,
 		.top_irq	= IRQ_TINT0_TINT34,
 	},
 	{
-		.base		= IO_ADDRESS(DAVINCI_TIMER1_BASE),
+		.base		= DAVINCI_TIMER1_BASE,
 		.bottom_irq	= IRQ_TINT1_TINT12,
 		.top_irq	= IRQ_TINT1_TINT34,
 	},
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/devices-da8xx.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/devices-da8xx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/devices-da8xx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/devices-da8xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -326,7 +326,7 @@
 	},
 };
 
-struct platform_device davinci_wdt_device = {
+struct platform_device da8xx_wdt_device = {
 	.name		= "watchdog",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(da8xx_watchdog_resources),
@@ -335,7 +335,7 @@
 
 int __init da8xx_register_watchdog(void)
 {
-	return platform_device_register(&davinci_wdt_device);
+	return platform_device_register(&da8xx_wdt_device);
 }
 
 static struct resource da8xx_emac_resources[] = {
@@ -584,10 +584,17 @@
 int da8xx_register_rtc(void)
 {
 	int ret;
+	void __iomem *base;
+
+	base = ioremap(DA8XX_RTC_BASE, SZ_4K);
+	if (WARN_ON(!base))
+		return -ENOMEM;
 
 	/* Unlock the rtc's registers */
-	__raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
-	__raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
+	__raw_writel(0x83e70b13, base + 0x6c);
+	__raw_writel(0x95a4f1e0, base + 0x70);
+
+	iounmap(base);
 
 	ret = platform_device_register(&da8xx_rtc_device);
 	if (!ret)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/dm355.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/dm355.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/dm355.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/dm355.c	2010-08-01 18:11:14.000000000 -0400
@@ -450,11 +450,6 @@
 
 /*----------------------------------------------------------------------*/
 
-#define PINMUX0		0x00
-#define PINMUX1		0x04
-#define PINMUX2		0x08
-#define PINMUX3		0x0c
-#define PINMUX4		0x10
 #define INTMUX		0x18
 #define EVTMUX		0x1c
 
@@ -788,9 +783,7 @@
 	},
 };
 
-static void __iomem *dm355_psc_bases[] = {
-	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
-};
+static u32 dm355_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
 
 /*
  * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
@@ -798,7 +791,7 @@
  * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
  * T1_TOP: Timer 1, top   :  <unused>
  */
-struct davinci_timer_info dm355_timer_info = {
+static struct davinci_timer_info dm355_timer_info = {
 	.timers		= davinci_timer_instance,
 	.clockevent_id	= T0_BOT,
 	.clocksource_id	= T0_TOP,
@@ -845,26 +838,28 @@
 static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.io_desc		= dm355_io_desc,
 	.io_desc_num		= ARRAY_SIZE(dm355_io_desc),
-	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.jtag_id_reg		= 0x01c40028,
 	.ids			= dm355_ids,
 	.ids_num		= ARRAY_SIZE(dm355_ids),
 	.cpu_clks		= dm355_clks,
 	.psc_bases		= dm355_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(dm355_psc_bases),
-	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
 	.pinmux_pins		= dm355_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(dm355_pins),
-	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_base		= DAVINCI_ARM_INTC_BASE,
 	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
 	.intc_irq_prios		= dm355_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm355_timer_info,
-	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_type		= GPIO_TYPE_DAVINCI,
+	.gpio_base		= DAVINCI_GPIO_BASE,
 	.gpio_num		= 104,
 	.gpio_irq		= IRQ_DM355_GPIOBNK0,
 	.serial_dev		= &dm355_serial_device,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
+	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/dm365.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/dm365.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/dm365.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/dm365.c	2010-08-01 18:11:14.000000000 -0400
@@ -467,11 +467,6 @@
 
 /*----------------------------------------------------------------------*/
 
-#define PINMUX0		0x00
-#define PINMUX1		0x04
-#define PINMUX2		0x08
-#define PINMUX3		0x0c
-#define PINMUX4		0x10
 #define INTMUX		0x18
 #define EVTMUX		0x1c
 
@@ -490,11 +485,14 @@
 MUX_CFG(DM365,	I2C_SDA,	3,   23,    3,	  2,	 false)
 MUX_CFG(DM365,	I2C_SCL,	3,   21,    3,	  2,	 false)
 
-MUX_CFG(DM365,	AEMIF_AR,	2,   0,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_AR_A14,	2,   0,     3,	  1,	 false)
+MUX_CFG(DM365,	AEMIF_AR_BA0,	2,   0,     3,	  2,	 false)
 MUX_CFG(DM365,	AEMIF_A3,	2,   2,     3,	  1,	 false)
 MUX_CFG(DM365,	AEMIF_A7,	2,   4,     3,	  1,	 false)
 MUX_CFG(DM365,	AEMIF_D15_8,	2,   6,     1,	  1,	 false)
 MUX_CFG(DM365,	AEMIF_CE0,	2,   7,     1,	  0,	 false)
+MUX_CFG(DM365,	AEMIF_CE1,	2,   8,     1,    0,     false)
+MUX_CFG(DM365,	AEMIF_WE_OE,	2,   9,     1,    0,     false)
 
 MUX_CFG(DM365,	MCBSP0_BDX,	0,   23,    1,	  1,	 false)
 MUX_CFG(DM365,	MCBSP0_X,	0,   22,    1,	  1,	 false)
@@ -573,9 +571,17 @@
 MUX_CFG(DM365,	SPI4_SDENA0,	4,   20,    3,    1,	 false)
 MUX_CFG(DM365,	SPI4_SDENA1,	4,   16,    3,    2,	 false)
 
+MUX_CFG(DM365,	CLKOUT0,	4,   20,    3,    3,     false)
+MUX_CFG(DM365,	CLKOUT1,	4,   16,    3,    3,     false)
+MUX_CFG(DM365,	CLKOUT2,	4,   8,     3,    3,     false)
+
 MUX_CFG(DM365,	GPIO20,		3,   21,    3,    0,	 false)
+MUX_CFG(DM365,	GPIO30,		4,   6,     3,	  0,	 false)
+MUX_CFG(DM365,	GPIO31,		4,   8,     3,	  0,	 false)
+MUX_CFG(DM365,	GPIO32,		4,   10,    3,	  0,	 false)
 MUX_CFG(DM365,	GPIO33,		4,   12,    3,	  0,	 false)
 MUX_CFG(DM365,	GPIO40,		4,   26,    3,	  0,	 false)
+MUX_CFG(DM365,	GPIO64_57,	2,   6,     1,	  0,	 false)
 
 MUX_CFG(DM365,	VOUT_FIELD,	1,   18,    3,	  1,	 false)
 MUX_CFG(DM365,	VOUT_FIELD_G81,	1,   18,    3,	  0,	 false)
@@ -1006,11 +1012,9 @@
 	},
 };
 
-static void __iomem *dm365_psc_bases[] = {
-	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
-};
+static u32 dm365_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
 
-struct davinci_timer_info dm365_timer_info = {
+static struct davinci_timer_info dm365_timer_info = {
 	.timers		= davinci_timer_instance,
 	.clockevent_id	= T0_BOT,
 	.clocksource_id	= T0_TOP,
@@ -1049,21 +1053,22 @@
 static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.io_desc		= dm365_io_desc,
 	.io_desc_num		= ARRAY_SIZE(dm365_io_desc),
-	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.jtag_id_reg		= 0x01c40028,
 	.ids			= dm365_ids,
 	.ids_num		= ARRAY_SIZE(dm365_ids),
 	.cpu_clks		= dm365_clks,
 	.psc_bases		= dm365_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(dm365_psc_bases),
-	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
 	.pinmux_pins		= dm365_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(dm365_pins),
-	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_base		= DAVINCI_ARM_INTC_BASE,
 	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
 	.intc_irq_prios		= dm365_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm365_timer_info,
-	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_type		= GPIO_TYPE_DAVINCI,
+	.gpio_base		= DAVINCI_GPIO_BASE,
 	.gpio_num		= 104,
 	.gpio_irq		= IRQ_DM365_GPIO0,
 	.gpio_unbanked		= 8,	/* really 16 ... skip muxed GPIOs */
@@ -1071,6 +1076,7 @@
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
+	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm365_init_asp(struct snd_platform_data *pdata)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/dm644x.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/dm644x.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/dm644x.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/dm644x.c	2010-08-01 18:11:14.000000000 -0400
@@ -277,7 +277,7 @@
 	.usecount = 1,              /* REVISIT: why cant' this be disabled? */
 };
 
-struct clk_lookup dm644x_clks[] = {
+static struct clk_lookup dm644x_clks[] = {
 	CLK(NULL, "ref", &ref_clk),
 	CLK(NULL, "pll1", &pll1_clk),
 	CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
@@ -350,9 +350,6 @@
        .resource	= dm644x_emac_resources,
 };
 
-#define PINMUX0		0x00
-#define PINMUX1		0x04
-
 /*
  * Device specific mux setup
  *
@@ -677,9 +674,7 @@
 	},
 };
 
-static void __iomem *dm644x_psc_bases[] = {
-	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
-};
+static u32 dm644x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
 
 /*
  * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
@@ -687,7 +682,7 @@
  * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
  * T1_TOP: Timer 1, top   :  <unused>
  */
-struct davinci_timer_info dm644x_timer_info = {
+static struct davinci_timer_info dm644x_timer_info = {
 	.timers		= davinci_timer_instance,
 	.clockevent_id	= T0_BOT,
 	.clocksource_id	= T0_TOP,
@@ -734,27 +729,29 @@
 static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.io_desc		= dm644x_io_desc,
 	.io_desc_num		= ARRAY_SIZE(dm644x_io_desc),
-	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.jtag_id_reg		= 0x01c40028,
 	.ids			= dm644x_ids,
 	.ids_num		= ARRAY_SIZE(dm644x_ids),
 	.cpu_clks		= dm644x_clks,
 	.psc_bases		= dm644x_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(dm644x_psc_bases),
-	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
 	.pinmux_pins		= dm644x_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(dm644x_pins),
-	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_base		= DAVINCI_ARM_INTC_BASE,
 	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
 	.intc_irq_prios 	= dm644x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm644x_timer_info,
-	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_type		= GPIO_TYPE_DAVINCI,
+	.gpio_base		= DAVINCI_GPIO_BASE,
 	.gpio_num		= 71,
 	.gpio_irq		= IRQ_GPIOBNK0,
 	.serial_dev		= &dm644x_serial_device,
 	.emac_pdata		= &dm644x_emac_pdata,
 	.sram_dma		= 0x00008000,
 	.sram_len		= SZ_16K,
+	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm644x_init_asp(struct snd_platform_data *pdata)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/dm646x.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/dm646x.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/dm646x.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/dm646x.c	2010-08-01 18:11:14.000000000 -0400
@@ -311,7 +311,7 @@
 	.flags = ALWAYS_ENABLED,
 };
 
-struct clk_lookup dm646x_clks[] = {
+static struct clk_lookup dm646x_clks[] = {
 	CLK(NULL, "ref", &ref_clk),
 	CLK(NULL, "aux", &aux_clkin),
 	CLK(NULL, "pll1", &pll1_clk),
@@ -401,9 +401,6 @@
 	.resource	= dm646x_emac_resources,
 };
 
-#define PINMUX0		0x00
-#define PINMUX1		0x04
-
 /*
  * Device specific mux setup
  *
@@ -596,32 +593,6 @@
 	.resource		= edma_resources,
 };
 
-static struct resource ide_resources[] = {
-	{
-		.start          = DM646X_ATA_REG_BASE,
-		.end            = DM646X_ATA_REG_BASE + 0x7ff,
-		.flags          = IORESOURCE_MEM,
-	},
-	{
-		.start          = IRQ_DM646X_IDE,
-		.end            = IRQ_DM646X_IDE,
-		.flags          = IORESOURCE_IRQ,
-	},
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_dev = {
-	.name           = "palm_bk3710",
-	.id             = -1,
-	.resource       = ide_resources,
-	.num_resources  = ARRAY_SIZE(ide_resources),
-	.dev = {
-		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-};
-
 static struct resource dm646x_mcasp0_resources[] = {
 	{
 		.name	= "mcasp0",
@@ -787,9 +758,7 @@
 	},
 };
 
-static void __iomem *dm646x_psc_bases[] = {
-	IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
-};
+static u32 dm646x_psc_bases[] = { DAVINCI_PWR_SLEEP_CNTRL_BASE };
 
 /*
  * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
@@ -797,7 +766,7 @@
  * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
  * T1_TOP: Timer 1, top   :  <unused>
  */
-struct davinci_timer_info dm646x_timer_info = {
+static struct davinci_timer_info dm646x_timer_info = {
 	.timers		= davinci_timer_instance,
 	.clockevent_id	= T0_BOT,
 	.clocksource_id	= T0_TOP,
@@ -844,35 +813,31 @@
 static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.io_desc		= dm646x_io_desc,
 	.io_desc_num		= ARRAY_SIZE(dm646x_io_desc),
-	.jtag_id_base		= IO_ADDRESS(0x01c40028),
+	.jtag_id_reg		= 0x01c40028,
 	.ids			= dm646x_ids,
 	.ids_num		= ARRAY_SIZE(dm646x_ids),
 	.cpu_clks		= dm646x_clks,
 	.psc_bases		= dm646x_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(dm646x_psc_bases),
-	.pinmux_base		= IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
 	.pinmux_pins		= dm646x_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(dm646x_pins),
-	.intc_base		= IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+	.intc_base		= DAVINCI_ARM_INTC_BASE,
 	.intc_type		= DAVINCI_INTC_TYPE_AINTC,
 	.intc_irq_prios		= dm646x_default_priorities,
 	.intc_irq_num		= DAVINCI_N_AINTC_IRQ,
 	.timer_info		= &dm646x_timer_info,
-	.gpio_base		= IO_ADDRESS(DAVINCI_GPIO_BASE),
+	.gpio_type		= GPIO_TYPE_DAVINCI,
+	.gpio_base		= DAVINCI_GPIO_BASE,
 	.gpio_num		= 43, /* Only 33 usable */
 	.gpio_irq		= IRQ_DM646X_GPIOBNK0,
 	.serial_dev		= &dm646x_serial_device,
 	.emac_pdata		= &dm646x_emac_pdata,
 	.sram_dma		= 0x10010000,
 	.sram_len		= SZ_32K,
+	.reset_device		= &davinci_wdt_device,
 };
 
-void __init dm646x_init_ide()
-{
-	davinci_cfg_reg(DM646X_ATAEN);
-	platform_device_register(&ide_dev);
-}
-
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
 {
 	dm646x_mcasp0_device.dev.platform_data = pdata;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/dma.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/dma.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/dma.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -243,7 +243,7 @@
 	} intr_data[EDMA_MAX_DMACH];
 };
 
-static struct edma *edma_info[EDMA_MAX_CC];
+static struct edma *edma_cc[EDMA_MAX_CC];
 static int arch_num_cc;
 
 /* dummy param set used to (re)initialize parameter RAM slots */
@@ -261,7 +261,7 @@
 
 	/* default to low priority queue */
 	if (queue_no == EVENTQ_DEFAULT)
-		queue_no = edma_info[ctlr]->default_queue;
+		queue_no = edma_cc[ctlr]->default_queue;
 
 	queue_no &= 7;
 	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
@@ -310,29 +310,27 @@
 	ctlr = EDMA_CTLR(lch);
 	lch = EDMA_CHAN_SLOT(lch);
 
-	if (!callback) {
+	if (!callback)
 		edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5,
-				(1 << (lch & 0x1f)));
-	}
+				BIT(lch & 0x1f));
 
-	edma_info[ctlr]->intr_data[lch].callback = callback;
-	edma_info[ctlr]->intr_data[lch].data = data;
+	edma_cc[ctlr]->intr_data[lch].callback = callback;
+	edma_cc[ctlr]->intr_data[lch].data = data;
 
 	if (callback) {
 		edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5,
-				(1 << (lch & 0x1f)));
+				BIT(lch & 0x1f));
 		edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5,
-				(1 << (lch & 0x1f)));
+				BIT(lch & 0x1f));
 	}
 }
 
 static int irq2ctlr(int irq)
 {
-	if (irq >= edma_info[0]->irq_res_start &&
-		irq <= edma_info[0]->irq_res_end)
+	if (irq >= edma_cc[0]->irq_res_start && irq <= edma_cc[0]->irq_res_end)
 		return 0;
-	else if (irq >= edma_info[1]->irq_res_start &&
-		irq <= edma_info[1]->irq_res_end)
+	else if (irq >= edma_cc[1]->irq_res_start &&
+		irq <= edma_cc[1]->irq_res_end)
 		return 1;
 
 	return -1;
@@ -353,15 +351,17 @@
 
 	dev_dbg(data, "dma_irq_handler\n");
 
-	if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0)
-	    && (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0))
+	if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0) &&
+	    (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0))
 		return IRQ_NONE;
 
 	while (1) {
 		int j;
-		if (edma_shadow0_read_array(ctlr, SH_IPR, 0))
+		if (edma_shadow0_read_array(ctlr, SH_IPR, 0) &
+				edma_shadow0_read_array(ctlr, SH_IER, 0))
 			j = 0;
-		else if (edma_shadow0_read_array(ctlr, SH_IPR, 1))
+		else if (edma_shadow0_read_array(ctlr, SH_IPR, 1) &
+				edma_shadow0_read_array(ctlr, SH_IER, 1))
 			j = 1;
 		else
 			break;
@@ -369,17 +369,17 @@
 				edma_shadow0_read_array(ctlr, SH_IPR, j));
 		for (i = 0; i < 32; i++) {
 			int k = (j << 5) + i;
-			if (edma_shadow0_read_array(ctlr, SH_IPR, j) &
-							(1 << i)) {
+			if ((edma_shadow0_read_array(ctlr, SH_IPR, j) & BIT(i))
+					&& (edma_shadow0_read_array(ctlr,
+							SH_IER, j) & BIT(i))) {
 				/* Clear the corresponding IPR bits */
 				edma_shadow0_write_array(ctlr, SH_ICR, j,
-							(1 << i));
-				if (edma_info[ctlr]->intr_data[k].callback) {
-					edma_info[ctlr]->intr_data[k].callback(
+							BIT(i));
+				if (edma_cc[ctlr]->intr_data[k].callback)
+					edma_cc[ctlr]->intr_data[k].callback(
 						k, DMA_COMPLETE,
-						edma_info[ctlr]->intr_data[k].
+						edma_cc[ctlr]->intr_data[k].
 						data);
-				}
 			}
 		}
 		cnt++;
@@ -423,19 +423,19 @@
 			for (i = 0; i < 32; i++) {
 				int k = (j << 5) + i;
 				if (edma_read_array(ctlr, EDMA_EMR, j) &
-							(1 << i)) {
+							BIT(i)) {
 					/* Clear the corresponding EMR bits */
 					edma_write_array(ctlr, EDMA_EMCR, j,
-							1 << i);
+							BIT(i));
 					/* Clear any SER */
 					edma_shadow0_write_array(ctlr, SH_SECR,
-								j, (1 << i));
-					if (edma_info[ctlr]->intr_data[k].
+								j, BIT(i));
+					if (edma_cc[ctlr]->intr_data[k].
 								callback) {
-						edma_info[ctlr]->intr_data[k].
+						edma_cc[ctlr]->intr_data[k].
 						callback(k,
 						DMA_CC_ERROR,
-						edma_info[ctlr]->intr_data
+						edma_cc[ctlr]->intr_data
 						[k].data);
 					}
 				}
@@ -444,11 +444,11 @@
 			dev_dbg(data, "QEMR %02x\n",
 				edma_read(ctlr, EDMA_QEMR));
 			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_QEMR) & (1 << i)) {
+				if (edma_read(ctlr, EDMA_QEMR) & BIT(i)) {
 					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_QEMCR, 1 << i);
+					edma_write(ctlr, EDMA_QEMCR, BIT(i));
 					edma_shadow0_write(ctlr, SH_QSECR,
-								(1 << i));
+								BIT(i));
 
 					/* NOTE:  not reported!! */
 				}
@@ -460,20 +460,19 @@
 			 * to just write CCERRCLR with CCERR value...
 			 */
 			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_CCERR) & (1 << i)) {
+				if (edma_read(ctlr, EDMA_CCERR) & BIT(i)) {
 					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_CCERRCLR, 1 << i);
+					edma_write(ctlr, EDMA_CCERRCLR, BIT(i));
 
 					/* NOTE:  not reported!! */
 				}
 			}
 		}
-		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0)
-		    && (edma_read_array(ctlr, EDMA_EMR, 1) == 0)
-		    && (edma_read(ctlr, EDMA_QEMR) == 0)
-		    && (edma_read(ctlr, EDMA_CCERR) == 0)) {
+		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
+		    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
+		    (edma_read(ctlr, EDMA_QEMR) == 0) &&
+		    (edma_read(ctlr, EDMA_CCERR) == 0))
 			break;
-		}
 		cnt++;
 		if (cnt > 10)
 			break;
@@ -511,9 +510,9 @@
 	int stop_slot = start_slot;
 	DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
 
-	for (i = start_slot; i < edma_info[ctlr]->num_slots; ++i) {
+	for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) {
 		j = EDMA_CHAN_SLOT(i);
-		if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse)) {
+		if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) {
 			/* Record our current beginning slot */
 			if (count == num_slots)
 				stop_slot = i;
@@ -529,8 +528,9 @@
 			if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
 				stop_slot = i;
 				break;
-			} else
+			} else {
 				count = num_slots;
+			}
 		}
 	}
 
@@ -540,12 +540,12 @@
 	 * of contiguous parameter RAM slots but do not find the exact number
 	 * requested as we may reach the total number of parameter RAM slots
 	 */
-	if (i == edma_info[ctlr]->num_slots)
+	if (i == edma_cc[ctlr]->num_slots)
 		stop_slot = i;
 
 	for (j = start_slot; j < stop_slot; j++)
 		if (test_bit(j, tmp_inuse))
-			clear_bit(j, edma_info[ctlr]->edma_inuse);
+			clear_bit(j, edma_cc[ctlr]->edma_inuse);
 
 	if (count)
 		return -EBUSY;
@@ -567,7 +567,7 @@
 				(int)pdev->resource[i].start >= 0) {
 			ctlr = EDMA_CTLR(pdev->resource[i].start);
 			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-					edma_info[ctlr]->edma_unused);
+					edma_cc[ctlr]->edma_unused);
 		}
 	}
 
@@ -641,14 +641,13 @@
 		for (i = 0; i < arch_num_cc; i++) {
 			channel = 0;
 			for (;;) {
-				channel = find_next_bit(edma_info[i]->
-						edma_unused,
-						edma_info[i]->num_channels,
+				channel = find_next_bit(edma_cc[i]->edma_unused,
+						edma_cc[i]->num_channels,
 						channel);
-				if (channel == edma_info[i]->num_channels)
+				if (channel == edma_cc[i]->num_channels)
 					break;
 				if (!test_and_set_bit(channel,
-						edma_info[i]->edma_inuse)) {
+						edma_cc[i]->edma_inuse)) {
 					done = 1;
 					ctlr = i;
 					break;
@@ -660,14 +659,14 @@
 		}
 		if (!done)
 			return -ENOMEM;
-	} else if (channel >= edma_info[ctlr]->num_channels) {
+	} else if (channel >= edma_cc[ctlr]->num_channels) {
 		return -EINVAL;
-	} else if (test_and_set_bit(channel, edma_info[ctlr]->edma_inuse)) {
+	} else if (test_and_set_bit(channel, edma_cc[ctlr]->edma_inuse)) {
 		return -EBUSY;
 	}
 
 	/* ensure access through shadow region 0 */
-	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f));
 
 	/* ensure no events are pending */
 	edma_stop(EDMA_CTLR_CHAN(ctlr, channel));
@@ -703,7 +702,7 @@
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel >= edma_info[ctlr]->num_channels)
+	if (channel >= edma_cc[ctlr]->num_channels)
 		return;
 
 	setup_dma_interrupt(channel, NULL, NULL);
@@ -711,7 +710,7 @@
 
 	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
 			&dummy_paramset, PARM_SIZE);
-	clear_bit(channel, edma_info[ctlr]->edma_inuse);
+	clear_bit(channel, edma_cc[ctlr]->edma_inuse);
 }
 EXPORT_SYMBOL(edma_free_channel);
 
@@ -735,20 +734,19 @@
 		slot = EDMA_CHAN_SLOT(slot);
 
 	if (slot < 0) {
-		slot = edma_info[ctlr]->num_channels;
+		slot = edma_cc[ctlr]->num_channels;
 		for (;;) {
-			slot = find_next_zero_bit(edma_info[ctlr]->edma_inuse,
-					edma_info[ctlr]->num_slots, slot);
-			if (slot == edma_info[ctlr]->num_slots)
+			slot = find_next_zero_bit(edma_cc[ctlr]->edma_inuse,
+					edma_cc[ctlr]->num_slots, slot);
+			if (slot == edma_cc[ctlr]->num_slots)
 				return -ENOMEM;
-			if (!test_and_set_bit(slot,
-						edma_info[ctlr]->edma_inuse))
+			if (!test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse))
 				break;
 		}
-	} else if (slot < edma_info[ctlr]->num_channels ||
-			slot >= edma_info[ctlr]->num_slots) {
+	} else if (slot < edma_cc[ctlr]->num_channels ||
+			slot >= edma_cc[ctlr]->num_slots) {
 		return -EINVAL;
-	} else if (test_and_set_bit(slot, edma_info[ctlr]->edma_inuse)) {
+	} else if (test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) {
 		return -EBUSY;
 	}
 
@@ -774,13 +772,13 @@
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_channels ||
-		slot >= edma_info[ctlr]->num_slots)
+	if (slot < edma_cc[ctlr]->num_channels ||
+		slot >= edma_cc[ctlr]->num_slots)
 		return;
 
 	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
 			&dummy_paramset, PARM_SIZE);
-	clear_bit(slot, edma_info[ctlr]->edma_inuse);
+	clear_bit(slot, edma_cc[ctlr]->edma_inuse);
 }
 EXPORT_SYMBOL(edma_free_slot);
 
@@ -818,8 +816,8 @@
 	 * of slots
 	 */
 	if ((id != EDMA_CONT_PARAMS_ANY) &&
-		(slot < edma_info[ctlr]->num_channels ||
-		slot >= edma_info[ctlr]->num_slots))
+		(slot < edma_cc[ctlr]->num_channels ||
+		slot >= edma_cc[ctlr]->num_slots))
 		return -EINVAL;
 
 	/*
@@ -828,13 +826,13 @@
 	 * channels
 	 */
 	if (count < 1 || count >
-		(edma_info[ctlr]->num_slots - edma_info[ctlr]->num_channels))
+		(edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels))
 		return -EINVAL;
 
 	switch (id) {
 	case EDMA_CONT_PARAMS_ANY:
 		return reserve_contiguous_slots(ctlr, id, count,
-						 edma_info[ctlr]->num_channels);
+						 edma_cc[ctlr]->num_channels);
 	case EDMA_CONT_PARAMS_FIXED_EXACT:
 	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
 		return reserve_contiguous_slots(ctlr, id, count, slot);
@@ -866,8 +864,8 @@
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_channels ||
-		slot >= edma_info[ctlr]->num_slots ||
+	if (slot < edma_cc[ctlr]->num_channels ||
+		slot >= edma_cc[ctlr]->num_slots ||
 		count < 1)
 		return -EINVAL;
 
@@ -877,7 +875,7 @@
 
 		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
 			&dummy_paramset, PARM_SIZE);
-		clear_bit(slot_to_free, edma_info[ctlr]->edma_inuse);
+		clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse);
 	}
 
 	return 0;
@@ -907,7 +905,7 @@
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_slots) {
+	if (slot < edma_cc[ctlr]->num_slots) {
 		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
 
 		if (mode) {
@@ -945,7 +943,7 @@
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_slots) {
+	if (slot < edma_cc[ctlr]->num_slots) {
 		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
 
 		if (mode) {
@@ -1005,7 +1003,7 @@
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_slots) {
+	if (slot < edma_cc[ctlr]->num_slots) {
 		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
 				0xffff0000, src_bidx);
 		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
@@ -1031,7 +1029,7 @@
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_slots) {
+	if (slot < edma_cc[ctlr]->num_slots) {
 		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
 				0x0000ffff, dest_bidx << 16);
 		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
@@ -1078,7 +1076,7 @@
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot < edma_info[ctlr]->num_slots) {
+	if (slot < edma_cc[ctlr]->num_slots) {
 		edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
 				0x0000ffff, bcnt_rld << 16);
 		if (sync_mode == ASYNC)
@@ -1108,9 +1106,9 @@
 	ctlr_to = EDMA_CTLR(to);
 	to = EDMA_CHAN_SLOT(to);
 
-	if (from >= edma_info[ctlr_from]->num_slots)
+	if (from >= edma_cc[ctlr_from]->num_slots)
 		return;
-	if (to >= edma_info[ctlr_to]->num_slots)
+	if (to >= edma_cc[ctlr_to]->num_slots)
 		return;
 	edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000,
 				PARM_OFFSET(to));
@@ -1131,7 +1129,7 @@
 	ctlr = EDMA_CTLR(from);
 	from = EDMA_CHAN_SLOT(from);
 
-	if (from >= edma_info[ctlr]->num_slots)
+	if (from >= edma_cc[ctlr]->num_slots)
 		return;
 	edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
 }
@@ -1158,7 +1156,7 @@
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot >= edma_info[ctlr]->num_slots)
+	if (slot >= edma_cc[ctlr]->num_slots)
 		return;
 	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param,
 			PARM_SIZE);
@@ -1180,7 +1178,7 @@
 	ctlr = EDMA_CTLR(slot);
 	slot = EDMA_CHAN_SLOT(slot);
 
-	if (slot >= edma_info[ctlr]->num_slots)
+	if (slot >= edma_cc[ctlr]->num_slots)
 		return;
 	memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
 			PARM_SIZE);
@@ -1205,8 +1203,8 @@
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel < edma_info[ctlr]->num_channels) {
-		unsigned int mask = (1 << (channel & 0x1f));
+	if (channel < edma_cc[ctlr]->num_channels) {
+		unsigned int mask = BIT(channel & 0x1f);
 
 		edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask);
 	}
@@ -1226,8 +1224,8 @@
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel < edma_info[ctlr]->num_channels) {
-		unsigned int mask = (1 << (channel & 0x1f));
+	if (channel < edma_cc[ctlr]->num_channels) {
+		unsigned int mask = BIT(channel & 0x1f);
 
 		edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask);
 	}
@@ -1252,12 +1250,12 @@
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel < edma_info[ctlr]->num_channels) {
+	if (channel < edma_cc[ctlr]->num_channels) {
 		int j = channel >> 5;
-		unsigned int mask = (1 << (channel & 0x1f));
+		unsigned int mask = BIT(channel & 0x1f);
 
 		/* EDMA channels without event association */
-		if (test_bit(channel, edma_info[ctlr]->edma_unused)) {
+		if (test_bit(channel, edma_cc[ctlr]->edma_unused)) {
 			pr_debug("EDMA: ESR%d %08x\n", j,
 				edma_shadow0_read_array(ctlr, SH_ESR, j));
 			edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
@@ -1298,9 +1296,9 @@
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel < edma_info[ctlr]->num_channels) {
+	if (channel < edma_cc[ctlr]->num_channels) {
 		int j = channel >> 5;
-		unsigned int mask = (1 << (channel & 0x1f));
+		unsigned int mask = BIT(channel & 0x1f);
 
 		edma_shadow0_write_array(ctlr, SH_EECR, j, mask);
 		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
@@ -1337,9 +1335,9 @@
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel < edma_info[ctlr]->num_channels) {
+	if (channel < edma_cc[ctlr]->num_channels) {
 		int j = (channel >> 5);
-		unsigned int mask = 1 << (channel & 0x1f);
+		unsigned int mask = BIT(channel & 0x1f);
 
 		pr_debug("EDMA: EMR%d %08x\n", j,
 				edma_read_array(ctlr, EDMA_EMR, j));
@@ -1348,7 +1346,7 @@
 		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 		/* Clear any SER */
 		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write(ctlr, EDMA_CCERRCLR, (1 << 16) | 0x3);
+		edma_write(ctlr, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0));
 	}
 }
 EXPORT_SYMBOL(edma_clean_channel);
@@ -1365,12 +1363,12 @@
 	ctlr = EDMA_CTLR(channel);
 	channel = EDMA_CHAN_SLOT(channel);
 
-	if (channel >= edma_info[ctlr]->num_channels)
+	if (channel >= edma_cc[ctlr]->num_channels)
 		return;
 	if (channel < 32)
-		edma_write(ctlr, EDMA_ECR, 1 << channel);
+		edma_write(ctlr, EDMA_ECR, BIT(channel));
 	else
-		edma_write(ctlr, EDMA_ECRH, 1 << (channel - 32));
+		edma_write(ctlr, EDMA_ECRH, BIT(channel - 32));
 }
 EXPORT_SYMBOL(edma_clear_event);
 
@@ -1402,8 +1400,9 @@
 				break;
 			else
 				return -ENODEV;
-		} else
+		} else {
 			found = 1;
+		}
 
 		len[j] = resource_size(r[j]);
 
@@ -1420,38 +1419,37 @@
 			goto fail1;
 		}
 
-		edma_info[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
-		if (!edma_info[j]) {
+		edma_cc[j] = kmalloc(sizeof(struct edma), GFP_KERNEL);
+		if (!edma_cc[j]) {
 			status = -ENOMEM;
 			goto fail1;
 		}
-		memset(edma_info[j], 0, sizeof(struct edma));
+		memset(edma_cc[j], 0, sizeof(struct edma));
 
-		edma_info[j]->num_channels = min_t(unsigned, info[j].n_channel,
+		edma_cc[j]->num_channels = min_t(unsigned, info[j].n_channel,
 							EDMA_MAX_DMACH);
-		edma_info[j]->num_slots = min_t(unsigned, info[j].n_slot,
+		edma_cc[j]->num_slots = min_t(unsigned, info[j].n_slot,
 							EDMA_MAX_PARAMENTRY);
-		edma_info[j]->num_cc = min_t(unsigned, info[j].n_cc,
-							EDMA_MAX_CC);
+		edma_cc[j]->num_cc = min_t(unsigned, info[j].n_cc, EDMA_MAX_CC);
 
-		edma_info[j]->default_queue = info[j].default_queue;
-		if (!edma_info[j]->default_queue)
-			edma_info[j]->default_queue = EVENTQ_1;
+		edma_cc[j]->default_queue = info[j].default_queue;
+		if (!edma_cc[j]->default_queue)
+			edma_cc[j]->default_queue = EVENTQ_1;
 
 		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
 			edmacc_regs_base[j]);
 
-		for (i = 0; i < edma_info[j]->num_slots; i++)
+		for (i = 0; i < edma_cc[j]->num_slots; i++)
 			memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
 					&dummy_paramset, PARM_SIZE);
 
 		/* Mark all channels as unused */
-		memset(edma_info[j]->edma_unused, 0xff,
-			sizeof(edma_info[j]->edma_unused));
+		memset(edma_cc[j]->edma_unused, 0xff,
+			sizeof(edma_cc[j]->edma_unused));
 
 		sprintf(irq_name, "edma%d", j);
 		irq[j] = platform_get_irq_byname(pdev, irq_name);
-		edma_info[j]->irq_res_start = irq[j];
+		edma_cc[j]->irq_res_start = irq[j];
 		status = request_irq(irq[j], dma_irq_handler, 0, "edma",
 					&pdev->dev);
 		if (status < 0) {
@@ -1462,7 +1460,7 @@
 
 		sprintf(irq_name, "edma%d_err", j);
 		err_irq[j] = platform_get_irq_byname(pdev, irq_name);
-		edma_info[j]->irq_res_end = err_irq[j];
+		edma_cc[j]->irq_res_end = err_irq[j];
 		status = request_irq(err_irq[j], dma_ccerr_handler, 0,
 					"edma_error", &pdev->dev);
 		if (status < 0) {
@@ -1475,7 +1473,7 @@
 		 * specified. This way, long transfers on the low priority queue
 		 * started by the codec engine will not cause audio defects.
 		 */
-		for (i = 0; i < edma_info[j]->num_channels; i++)
+		for (i = 0; i < edma_cc[j]->num_channels; i++)
 			map_dmach_queue(j, i, EVENTQ_1);
 
 		queue_tc_mapping = info[j].queue_tc_mapping;
@@ -1538,7 +1536,7 @@
 			release_mem_region(r[i]->start, len[i]);
 		if (edmacc_regs_base[i])
 			iounmap(edmacc_regs_base[i]);
-		kfree(edma_info[i]);
+		kfree(edma_cc[i]);
 	}
 	return status;
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/gpio.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -20,46 +20,92 @@
 
 #include <asm/mach/irq.h>
 
-static DEFINE_SPINLOCK(gpio_lock);
-
-struct davinci_gpio {
-	struct gpio_chip	chip;
-	struct gpio_controller	*__iomem regs;
-	int			irq_base;
+struct davinci_gpio_regs {
+	u32	dir;
+	u32	out_data;
+	u32	set_data;
+	u32	clr_data;
+	u32	in_data;
+	u32	set_rising;
+	u32	clr_rising;
+	u32	set_falling;
+	u32	clr_falling;
+	u32	intstat;
 };
 
-static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+#define chip2controller(chip)	\
+	container_of(chip, struct davinci_gpio_controller, chip)
 
-/* create a non-inlined version */
-static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
+static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+static void __iomem *gpio_base;
+
+static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio)
 {
-	return __gpio_to_controller(gpio);
+	void __iomem *ptr;
+
+	if (gpio < 32 * 1)
+		ptr = gpio_base + 0x10;
+	else if (gpio < 32 * 2)
+		ptr = gpio_base + 0x38;
+	else if (gpio < 32 * 3)
+		ptr = gpio_base + 0x60;
+	else if (gpio < 32 * 4)
+		ptr = gpio_base + 0x88;
+	else if (gpio < 32 * 5)
+		ptr = gpio_base + 0xb0;
+	else
+		ptr = NULL;
+	return ptr;
+}
+
+static inline struct davinci_gpio_regs __iomem *irq2regs(int irq)
+{
+	struct davinci_gpio_regs __iomem *g;
+
+	g = (__force struct davinci_gpio_regs __iomem *)get_irq_chip_data(irq);
+
+	return g;
 }
 
 static int __init davinci_gpio_irq_setup(void);
 
 /*--------------------------------------------------------------------------*/
 
-/*
- * board setup code *MUST* set PINMUX0 and PINMUX1 as
- * needed, and enable the GPIO clock.
- */
-
-static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
+/* board setup code *MUST* setup pinmux and enable the GPIO clock. */
+static inline int __davinci_direction(struct gpio_chip *chip,
+			unsigned offset, bool out, int value)
 {
-	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
-	struct gpio_controller *__iomem g = d->regs;
+	struct davinci_gpio_controller *d = chip2controller(chip);
+	struct davinci_gpio_regs __iomem *g = d->regs;
+	unsigned long flags;
 	u32 temp;
+	u32 mask = 1 << offset;
 
-	spin_lock(&gpio_lock);
+	spin_lock_irqsave(&d->lock, flags);
 	temp = __raw_readl(&g->dir);
-	temp |= (1 << offset);
+	if (out) {
+		temp &= ~mask;
+		__raw_writel(mask, value ? &g->set_data : &g->clr_data);
+	} else {
+		temp |= mask;
+	}
 	__raw_writel(temp, &g->dir);
-	spin_unlock(&gpio_lock);
+	spin_unlock_irqrestore(&d->lock, flags);
 
 	return 0;
 }
 
+static int davinci_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	return __davinci_direction(chip, offset, false, 0);
+}
+
+static int
+davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
+{
+	return __davinci_direction(chip, offset, true, value);
+}
+
 /*
  * Read the pin's value (works even if it's set up as output);
  * returns zero/nonzero.
@@ -69,37 +115,20 @@
  */
 static int davinci_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
-	struct gpio_controller *__iomem g = d->regs;
+	struct davinci_gpio_controller *d = chip2controller(chip);
+	struct davinci_gpio_regs __iomem *g = d->regs;
 
 	return (1 << offset) & __raw_readl(&g->in_data);
 }
 
-static int
-davinci_direction_out(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
-	struct gpio_controller *__iomem g = d->regs;
-	u32 temp;
-	u32 mask = 1 << offset;
-
-	spin_lock(&gpio_lock);
-	temp = __raw_readl(&g->dir);
-	temp &= ~mask;
-	__raw_writel(mask, value ? &g->set_data : &g->clr_data);
-	__raw_writel(temp, &g->dir);
-	spin_unlock(&gpio_lock);
-	return 0;
-}
-
 /*
  * Assuming the pin is muxed as a gpio output, set its output value.
  */
 static void
 davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
-	struct gpio_controller *__iomem g = d->regs;
+	struct davinci_gpio_controller *d = chip2controller(chip);
+	struct davinci_gpio_regs __iomem *g = d->regs;
 
 	__raw_writel((1 << offset), value ? &g->set_data : &g->clr_data);
 }
@@ -109,6 +138,10 @@
 	int i, base;
 	unsigned ngpio;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct davinci_gpio_regs *regs;
+
+	if (soc_info->gpio_type != GPIO_TYPE_DAVINCI)
+		return 0;
 
 	/*
 	 * The gpio banks conceptually expose a segmented bitmap,
@@ -124,6 +157,10 @@
 	if (WARN_ON(DAVINCI_N_GPIO < ngpio))
 		ngpio = DAVINCI_N_GPIO;
 
+	gpio_base = ioremap(soc_info->gpio_base, SZ_4K);
+	if (WARN_ON(!gpio_base))
+		return -ENOMEM;
+
 	for (i = 0, base = 0; base < ngpio; i++, base += 32) {
 		chips[i].chip.label = "DaVinci";
 
@@ -137,11 +174,20 @@
 		if (chips[i].chip.ngpio > 32)
 			chips[i].chip.ngpio = 32;
 
-		chips[i].regs = gpio2controller(base);
+		spin_lock_init(&chips[i].lock);
+
+		regs = gpio2regs(base);
+		chips[i].regs = regs;
+		chips[i].set_data = &regs->set_data;
+		chips[i].clr_data = &regs->clr_data;
+		chips[i].in_data = &regs->in_data;
 
 		gpiochip_add(&chips[i].chip);
 	}
 
+	soc_info->gpio_ctlrs = chips;
+	soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32);
+
 	davinci_gpio_irq_setup();
 	return 0;
 }
@@ -161,7 +207,7 @@
 
 static void gpio_irq_disable(unsigned irq)
 {
-	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	struct davinci_gpio_regs __iomem *g = irq2regs(irq);
 	u32 mask = (u32) get_irq_data(irq);
 
 	__raw_writel(mask, &g->clr_falling);
@@ -170,7 +216,7 @@
 
 static void gpio_irq_enable(unsigned irq)
 {
-	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	struct davinci_gpio_regs __iomem *g = irq2regs(irq);
 	u32 mask = (u32) get_irq_data(irq);
 	unsigned status = irq_desc[irq].status;
 
@@ -186,7 +232,7 @@
 
 static int gpio_irq_type(unsigned irq, unsigned trigger)
 {
-	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	struct davinci_gpio_regs __iomem *g = irq2regs(irq);
 	u32 mask = (u32) get_irq_data(irq);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
@@ -215,7 +261,7 @@
 static void
 gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	struct davinci_gpio_regs __iomem *g = irq2regs(irq);
 	u32 mask = 0xffff;
 
 	/* we only care about one bank */
@@ -253,7 +299,7 @@
 
 static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset)
 {
-	struct davinci_gpio *d = container_of(chip, struct davinci_gpio, chip);
+	struct davinci_gpio_controller *d = chip2controller(chip);
 
 	if (d->irq_base >= 0)
 		return d->irq_base + offset;
@@ -276,7 +322,7 @@
 
 static int gpio_irq_type_unbanked(unsigned irq, unsigned trigger)
 {
-	struct gpio_controller *__iomem g = get_irq_chip_data(irq);
+	struct davinci_gpio_regs __iomem *g = irq2regs(irq);
 	u32 mask = (u32) get_irq_data(irq);
 
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
@@ -305,7 +351,7 @@
 	u32		binten = 0;
 	unsigned	ngpio, bank_irq;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	struct gpio_controller	*__iomem g;
+	struct davinci_gpio_regs	__iomem *g;
 
 	ngpio = soc_info->gpio_num;
 
@@ -354,7 +400,7 @@
 		gpio_irqchip_unbanked.set_type = gpio_irq_type_unbanked;
 
 		/* default trigger: both edges */
-		g = gpio2controller(0);
+		g = gpio2regs(0);
 		__raw_writel(~0, &g->set_falling);
 		__raw_writel(~0, &g->set_rising);
 
@@ -362,7 +408,7 @@
 		for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) {
 			set_irq_chip(irq, &gpio_irqchip_unbanked);
 			set_irq_data(irq, (void *) __gpio_mask(gpio));
-			set_irq_chip_data(irq, g);
+			set_irq_chip_data(irq, (__force void *) g);
 			irq_desc[irq].status |= IRQ_TYPE_EDGE_BOTH;
 		}
 
@@ -379,18 +425,18 @@
 		unsigned		i;
 
 		/* disabled by default, enabled only as needed */
-		g = gpio2controller(gpio);
+		g = gpio2regs(gpio);
 		__raw_writel(~0, &g->clr_falling);
 		__raw_writel(~0, &g->clr_rising);
 
 		/* set up all irqs in this bank */
 		set_irq_chained_handler(bank_irq, gpio_irq_handler);
-		set_irq_chip_data(bank_irq, g);
-		set_irq_data(bank_irq, (void *)irq);
+		set_irq_chip_data(bank_irq, (__force void *) g);
+		set_irq_data(bank_irq, (void *) irq);
 
 		for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
 			set_irq_chip(irq, &gpio_irqchip);
-			set_irq_chip_data(irq, g);
+			set_irq_chip_data(irq, (__force void *) g);
 			set_irq_data(irq, (void *) __gpio_mask(gpio));
 			set_irq_handler(irq, handle_simple_irq);
 			set_irq_flags(irq, IRQF_VALID);
@@ -403,7 +449,7 @@
 	/* BINTEN -- per-bank interrupt enable. genirq would also let these
 	 * bits be set/cleared dynamically.
 	 */
-	__raw_writel(binten, soc_info->gpio_base + 0x08);
+	__raw_writel(binten, gpio_base + 0x08);
 
 	printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/common.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/common.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/common.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/common.h	2010-08-01 18:11:14.000000000 -0400
@@ -12,6 +12,9 @@
 #ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H
 #define __ARCH_ARM_MACH_DAVINCI_COMMON_H
 
+#include <linux/compiler.h>
+#include <linux/types.h>
+
 struct sys_timer;
 
 extern struct sys_timer davinci_timer;
@@ -21,7 +24,7 @@
 extern int davinci_intc_type;
 
 struct davinci_timer_instance {
-	void __iomem	*base;
+	u32		base;
 	u32		bottom_irq;
 	u32		top_irq;
 	unsigned long	cmp_off;
@@ -34,39 +37,54 @@
 	unsigned int			clocksource_id;
 };
 
-/* SoC specific init support */
+struct davinci_gpio_controller;
+
+/*
+ * SoC info passed into common davinci modules.
+ *
+ * Base addresses in this structure should be physical and not virtual.
+ * Modules that take such base addresses, should internally ioremap() them to
+ * use.
+ */
 struct davinci_soc_info {
 	struct map_desc			*io_desc;
 	unsigned long			io_desc_num;
 	u32				cpu_id;
 	u32				jtag_id;
-	void __iomem			*jtag_id_base;
+	u32				jtag_id_reg;
 	struct davinci_id		*ids;
 	unsigned long			ids_num;
 	struct clk_lookup		*cpu_clks;
-	void __iomem			**psc_bases;
+	u32				*psc_bases;
 	unsigned long			psc_bases_num;
-	void __iomem			*pinmux_base;
+	u32				pinmux_base;
 	const struct mux_config		*pinmux_pins;
 	unsigned long			pinmux_pins_num;
-	void __iomem			*intc_base;
+	u32				intc_base;
 	int				intc_type;
 	u8				*intc_irq_prios;
 	unsigned long			intc_irq_num;
+	u32				*intc_host_map;
 	struct davinci_timer_info	*timer_info;
-	void __iomem			*gpio_base;
+	int				gpio_type;
+	u32				gpio_base;
 	unsigned			gpio_num;
 	unsigned			gpio_irq;
 	unsigned			gpio_unbanked;
+	struct davinci_gpio_controller	*gpio_ctlrs;
+	int				gpio_ctlrs_num;
 	struct platform_device		*serial_dev;
 	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;
 	unsigned			sram_len;
+	struct platform_device		*reset_device;
+	void				(*reset)(struct platform_device *);
 };
 
 extern struct davinci_soc_info davinci_soc_info;
 
 extern void davinci_common_init(struct davinci_soc_info *soc_info);
+extern void davinci_init_ide(void);
 
 /* standard place to map on-chip SRAMs; they *may* support DMA */
 #define SRAM_VIRT	0xfffe0000
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/cp_intc.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/cp_intc.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/cp_intc.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/cp_intc.h	2010-08-01 18:11:14.000000000 -0400
@@ -51,7 +51,6 @@
 #define CP_INTC_HOST_PRIO_VECTOR(n)	(0x1600 + (n << 2))
 #define CP_INTC_VECTOR_ADDR(n)		(0x2000 + (n << 2))
 
-void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
-			 u8 *irq_prio);
+void __init cp_intc_init(void);
 
 #endif	/* __ASM_HARDWARE_CP_INTC_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/cputype.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/cputype.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/cputype.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/cputype.h	2010-08-01 18:11:14.000000000 -0400
@@ -33,6 +33,7 @@
 #define	DAVINCI_CPU_ID_DM365		0x03650000
 #define	DAVINCI_CPU_ID_DA830		0x08300000
 #define	DAVINCI_CPU_ID_DA850		0x08500000
+#define	DAVINCI_CPU_ID_TNETV107X	0x0b8a0000
 
 #define IS_DAVINCI_CPU(type, id)					\
 static inline int is_davinci_ ##type(void)				\
@@ -46,6 +47,7 @@
 IS_DAVINCI_CPU(dm365, DAVINCI_CPU_ID_DM365)
 IS_DAVINCI_CPU(da830, DAVINCI_CPU_ID_DA830)
 IS_DAVINCI_CPU(da850, DAVINCI_CPU_ID_DA850)
+IS_DAVINCI_CPU(tnetv107x, DAVINCI_CPU_ID_TNETV107X)
 
 #ifdef CONFIG_ARCH_DAVINCI_DM644x
 #define cpu_is_davinci_dm644x() is_davinci_dm644x()
@@ -83,4 +85,10 @@
 #define cpu_is_davinci_da850() 0
 #endif
 
+#ifdef CONFIG_ARCH_DAVINCI_TNETV107X
+#define cpu_is_davinci_tnetv107x() is_davinci_tnetv107x()
+#else
+#define cpu_is_davinci_tnetv107x() 0
+#endif
+
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/da8xx.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/da8xx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/da8xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/da8xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -64,27 +64,6 @@
 #define DA8XX_DDR2_CTL_BASE	0xb0000000
 #define DA8XX_ARM_RAM_BASE	0xffff0000
 
-#define PINMUX0			0x00
-#define PINMUX1			0x04
-#define PINMUX2			0x08
-#define PINMUX3			0x0c
-#define PINMUX4			0x10
-#define PINMUX5			0x14
-#define PINMUX6			0x18
-#define PINMUX7			0x1c
-#define PINMUX8			0x20
-#define PINMUX9			0x24
-#define PINMUX10		0x28
-#define PINMUX11		0x2c
-#define PINMUX12		0x30
-#define PINMUX13		0x34
-#define PINMUX14		0x38
-#define PINMUX15		0x3c
-#define PINMUX16		0x40
-#define PINMUX17		0x44
-#define PINMUX18		0x48
-#define PINMUX19		0x4c
-
 void __init da830_init(void);
 void __init da850_init(void);
 
@@ -108,6 +87,8 @@
 extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
 extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
 
+extern struct platform_device da8xx_wdt_device;
+
 extern const short da830_emif25_pins[];
 extern const short da830_spi0_pins[];
 extern const short da830_spi1_pins[];
@@ -146,10 +127,4 @@
 extern const short da850_nand_pins[];
 extern const short da850_nor_pins[];
 
-#ifdef CONFIG_DAVINCI_MUX
-int da8xx_pinmux_setup(const short pins[]);
-#else
-static inline int da8xx_pinmux_setup(const short pins[]) { return 0; }
-#endif
-
 #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/dm355.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/dm355.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/dm355.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/dm355.h	2010-08-01 18:11:14.000000000 -0400
@@ -15,6 +15,9 @@
 #include <mach/asp.h>
 #include <media/davinci/vpfe_capture.h>
 
+#define DM355_ASYNC_EMIF_CONTROL_BASE	0x01E10000
+#define DM355_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+
 #define ASP1_TX_EVT_EN	1
 #define ASP1_RX_EVT_EN	2
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/dm365.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/dm365.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/dm365.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/dm365.h	2010-08-01 18:11:14.000000000 -0400
@@ -36,6 +36,10 @@
 #define DAVINCI_DMA_VC_TX		2
 #define DAVINCI_DMA_VC_RX		3
 
+#define DM365_ASYNC_EMIF_CONTROL_BASE	0x01D10000
+#define DM365_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
+#define DM365_ASYNC_EMIF_DATA_CE1_BASE	0x04000000
+
 void __init dm365_init(void);
 void __init dm365_init_asp(struct snd_platform_data *pdata);
 void __init dm365_init_vc(struct snd_platform_data *pdata);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/dm644x.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/dm644x.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/dm644x.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/dm644x.h	2010-08-01 18:11:14.000000000 -0400
@@ -34,6 +34,12 @@
 #define DM644X_EMAC_MDIO_OFFSET		(0x4000)
 #define DM644X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
+#define DM644X_ASYNC_EMIF_CONTROL_BASE	0x01E00000
+#define DM644X_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+#define DM644X_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
+#define DM644X_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
+#define DM644X_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
+
 void __init dm644x_init(void);
 void __init dm644x_init_asp(struct snd_platform_data *pdata);
 void dm644x_set_vpfe_config(struct vpfe_config *cfg);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/dm646x.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/dm646x.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/dm646x.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/dm646x.h	2010-08-01 18:11:14.000000000 -0400
@@ -25,10 +25,10 @@
 #define DM646X_EMAC_MDIO_OFFSET		(0x4000)
 #define DM646X_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
-#define DM646X_ATA_REG_BASE		(0x01C66000)
+#define DM646X_ASYNC_EMIF_CONTROL_BASE	0x20008000
+#define DM646X_ASYNC_EMIF_CS2_SPACE_BASE 0x42000000
 
 void __init dm646x_init(void);
-void __init dm646x_init_ide(void);
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
 void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
 void __init dm646x_board_setup_refclk(struct clk *clk);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -14,6 +14,8 @@
 #define	__DAVINCI_GPIO_H
 
 #include <linux/io.h>
+#include <linux/spinlock.h>
+
 #include <asm-generic/gpio.h>
 
 #include <mach/irqs.h>
@@ -21,6 +23,10 @@
 
 #define DAVINCI_GPIO_BASE 0x01C67000
 
+enum davinci_gpio_type {
+	GPIO_TYPE_DAVINCI = 0,
+};
+
 /*
  * basic gpio routines
  *
@@ -45,17 +51,14 @@
 /* Convert GPIO signal to GPIO pin number */
 #define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
 
-struct gpio_controller {
-	u32	dir;
-	u32	out_data;
-	u32	set_data;
-	u32	clr_data;
-	u32	in_data;
-	u32	set_rising;
-	u32	clr_rising;
-	u32	set_falling;
-	u32	clr_falling;
-	u32	intstat;
+struct davinci_gpio_controller {
+	struct gpio_chip	chip;
+	int			irq_base;
+	spinlock_t		lock;
+	void __iomem		*regs;
+	void __iomem		*set_data;
+	void __iomem		*clr_data;
+	void __iomem		*in_data;
 };
 
 /* The __gpio_to_controller() and __gpio_mask() functions inline to constants
@@ -67,25 +70,16 @@
  *
  * These are NOT part of the cross-platform GPIO interface
  */
-static inline struct gpio_controller *__iomem
+static inline struct davinci_gpio_controller *
 __gpio_to_controller(unsigned gpio)
 {
-	void *__iomem ptr;
-	void __iomem *base = davinci_soc_info.gpio_base;
+	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
+	int index = gpio / 32;
 
-	if (gpio < 32 * 1)
-		ptr = base + 0x10;
-	else if (gpio < 32 * 2)
-		ptr = base + 0x38;
-	else if (gpio < 32 * 3)
-		ptr = base + 0x60;
-	else if (gpio < 32 * 4)
-		ptr = base + 0x88;
-	else if (gpio < 32 * 5)
-		ptr = base + 0xb0;
-	else
-		ptr = NULL;
-	return ptr;
+	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
+		return NULL;
+
+	return ctlrs + index;
 }
 
 static inline u32 __gpio_mask(unsigned gpio)
@@ -101,16 +95,16 @@
  */
 static inline void gpio_set_value(unsigned gpio, int value)
 {
-	if (__builtin_constant_p(value) && gpio < DAVINCI_N_GPIO) {
-		struct gpio_controller	*__iomem g;
-		u32			mask;
+	if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) {
+		struct davinci_gpio_controller *ctlr;
+		u32				mask;
 
-		g = __gpio_to_controller(gpio);
+		ctlr = __gpio_to_controller(gpio);
 		mask = __gpio_mask(gpio);
 		if (value)
-			__raw_writel(mask, &g->set_data);
+			__raw_writel(mask, ctlr->set_data);
 		else
-			__raw_writel(mask, &g->clr_data);
+			__raw_writel(mask, ctlr->clr_data);
 		return;
 	}
 
@@ -128,18 +122,18 @@
  */
 static inline int gpio_get_value(unsigned gpio)
 {
-	struct gpio_controller	*__iomem g;
+	struct davinci_gpio_controller *ctlr;
 
-	if (!__builtin_constant_p(gpio) || gpio >= DAVINCI_N_GPIO)
+	if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num)
 		return __gpio_get_value(gpio);
 
-	g = __gpio_to_controller(gpio);
-	return __gpio_mask(gpio) & __raw_readl(&g->in_data);
+	ctlr = __gpio_to_controller(gpio);
+	return __gpio_mask(gpio) & __raw_readl(ctlr->in_data);
 }
 
 static inline int gpio_cansleep(unsigned gpio)
 {
-	if (__builtin_constant_p(gpio) && gpio < DAVINCI_N_GPIO)
+	if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num)
 		return 0;
 	else
 		return __gpio_cansleep(gpio);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -401,6 +401,103 @@
 
 #define DA850_N_CP_INTC_IRQ		101
 
+
+/* TNETV107X specific interrupts */
+#define IRQ_TNETV107X_TDM1_TXDMA		0
+#define IRQ_TNETV107X_EXT_INT_0			1
+#define IRQ_TNETV107X_EXT_INT_1			2
+#define IRQ_TNETV107X_GPIO_INT12		3
+#define IRQ_TNETV107X_GPIO_INT13		4
+#define IRQ_TNETV107X_TIMER_0_TINT12		5
+#define IRQ_TNETV107X_TIMER_1_TINT12		6
+#define IRQ_TNETV107X_UART0			7
+#define IRQ_TNETV107X_TDM1_RXDMA		8
+#define IRQ_TNETV107X_MCDMA_INT0		9
+#define IRQ_TNETV107X_MCDMA_INT1		10
+#define IRQ_TNETV107X_TPCC			11
+#define IRQ_TNETV107X_TPCC_INT0			12
+#define IRQ_TNETV107X_TPCC_INT1			13
+#define IRQ_TNETV107X_TPCC_INT2			14
+#define IRQ_TNETV107X_TPCC_INT3			15
+#define IRQ_TNETV107X_TPTC0			16
+#define IRQ_TNETV107X_TPTC1			17
+#define IRQ_TNETV107X_TIMER_0_TINT34		18
+#define IRQ_TNETV107X_ETHSS			19
+#define IRQ_TNETV107X_TIMER_1_TINT34		20
+#define IRQ_TNETV107X_DSP2ARM_INT0		21
+#define IRQ_TNETV107X_DSP2ARM_INT1		22
+#define IRQ_TNETV107X_ARM_NPMUIRQ		23
+#define IRQ_TNETV107X_USB1			24
+#define IRQ_TNETV107X_VLYNQ			25
+#define IRQ_TNETV107X_UART0_DMATX		26
+#define IRQ_TNETV107X_UART0_DMARX		27
+#define IRQ_TNETV107X_TDM1_TXMCSP		28
+#define IRQ_TNETV107X_SSP			29
+#define IRQ_TNETV107X_MCDMA_INT2		30
+#define IRQ_TNETV107X_MCDMA_INT3		31
+#define IRQ_TNETV107X_TDM_CODECIF_EOT		32
+#define IRQ_TNETV107X_IMCOP_SQR_ARM		33
+#define IRQ_TNETV107X_USB0			34
+#define IRQ_TNETV107X_USB_CDMA			35
+#define IRQ_TNETV107X_LCD			36
+#define IRQ_TNETV107X_KEYPAD			37
+#define IRQ_TNETV107X_KEYPAD_FREE		38
+#define IRQ_TNETV107X_RNG			39
+#define IRQ_TNETV107X_PKA			40
+#define IRQ_TNETV107X_TDM0_TXDMA		41
+#define IRQ_TNETV107X_TDM0_RXDMA		42
+#define IRQ_TNETV107X_TDM0_TXMCSP		43
+#define IRQ_TNETV107X_TDM0_RXMCSP		44
+#define IRQ_TNETV107X_TDM1_RXMCSP		45
+#define IRQ_TNETV107X_SDIO1			46
+#define IRQ_TNETV107X_SDIO0			47
+#define IRQ_TNETV107X_TSC			48
+#define IRQ_TNETV107X_TS			49
+#define IRQ_TNETV107X_UART1			50
+#define IRQ_TNETV107X_MBX_LITE			51
+#define IRQ_TNETV107X_GPIO_INT00		52
+#define IRQ_TNETV107X_GPIO_INT01		53
+#define IRQ_TNETV107X_GPIO_INT02		54
+#define IRQ_TNETV107X_GPIO_INT03		55
+#define IRQ_TNETV107X_UART2			56
+#define IRQ_TNETV107X_UART2_DMATX		57
+#define IRQ_TNETV107X_UART2_DMARX		58
+#define IRQ_TNETV107X_IMCOP_IMX			59
+#define IRQ_TNETV107X_IMCOP_VLCD		60
+#define IRQ_TNETV107X_AES			61
+#define IRQ_TNETV107X_DES			62
+#define IRQ_TNETV107X_SHAMD5			63
+#define IRQ_TNETV107X_TPCC_ERR			68
+#define IRQ_TNETV107X_TPCC_PROT			69
+#define IRQ_TNETV107X_TPTC0_ERR			70
+#define IRQ_TNETV107X_TPTC1_ERR			71
+#define IRQ_TNETV107X_UART0_ERR			72
+#define IRQ_TNETV107X_UART1_ERR			73
+#define IRQ_TNETV107X_AEMIF_ERR			74
+#define IRQ_TNETV107X_DDR_ERR			75
+#define IRQ_TNETV107X_WDTARM_INT0		76
+#define IRQ_TNETV107X_MCDMA_ERR			77
+#define IRQ_TNETV107X_GPIO_ERR			78
+#define IRQ_TNETV107X_MPU_ADDR			79
+#define IRQ_TNETV107X_MPU_PROT			80
+#define IRQ_TNETV107X_IOPU_ADDR			81
+#define IRQ_TNETV107X_IOPU_PROT			82
+#define IRQ_TNETV107X_KEYPAD_ADDR_ERR		83
+#define IRQ_TNETV107X_WDT0_ADDR_ERR		84
+#define IRQ_TNETV107X_WDT1_ADDR_ERR		85
+#define IRQ_TNETV107X_CLKCTL_ADDR_ERR		86
+#define IRQ_TNETV107X_PLL_UNLOCK		87
+#define IRQ_TNETV107X_WDTDSP_INT0		88
+#define IRQ_TNETV107X_SEC_CTRL_VIOLATION	89
+#define IRQ_TNETV107X_KEY_MNG_VIOLATION		90
+#define IRQ_TNETV107X_PBIST_CPU			91
+#define IRQ_TNETV107X_WDTARM			92
+#define IRQ_TNETV107X_PSC			93
+#define IRQ_TNETV107X_MMC0			94
+#define IRQ_TNETV107X_MMC1			95
+
+#define TNETV107X_N_CP_INTC_IRQ			96
+
 /* da850 currently has the most gpio pins (144) */
 #define DAVINCI_N_GPIO			144
 /* da850 currently has the most irqs so use DA850_N_CP_INTC_IRQ */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/mmc.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/mmc.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/mmc.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/mmc.h	2010-08-01 18:11:14.000000000 -0400
@@ -22,6 +22,9 @@
 
 	/* Version of the MMC/SD controller */
 	u8	version;
+
+	/* Number of sg segments */
+	u8	nr_sg;
 };
 void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/mux.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/mux.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/mux.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/mux.h	2010-08-01 18:11:14.000000000 -0400
@@ -194,11 +194,14 @@
 	DM365_I2C_SCL,
 
 	/* AEMIF */
-	DM365_AEMIF_AR,
+	DM365_AEMIF_AR_A14,
+	DM365_AEMIF_AR_BA0,
 	DM365_AEMIF_A3,
 	DM365_AEMIF_A7,
 	DM365_AEMIF_D15_8,
 	DM365_AEMIF_CE0,
+	DM365_AEMIF_CE1,
+	DM365_AEMIF_WE_OE,
 
 	/* ASP0 function */
 	DM365_MCBSP0_BDX,
@@ -287,10 +290,19 @@
 	DM365_SPI4_SDENA0,
 	DM365_SPI4_SDENA1,
 
+	/* Clock */
+	DM365_CLKOUT0,
+	DM365_CLKOUT1,
+	DM365_CLKOUT2,
+
 	/* GPIO */
 	DM365_GPIO20,
+	DM365_GPIO30,
+	DM365_GPIO31,
+	DM365_GPIO32,
 	DM365_GPIO33,
 	DM365_GPIO40,
+	DM365_GPIO64_57,
 
 	/* Video */
 	DM365_VOUT_FIELD,
@@ -904,12 +916,288 @@
 	DA850_RTC_ALARM,
 };
 
+enum davinci_tnetv107x_index {
+	TNETV107X_ASR_A00,
+	TNETV107X_GPIO32,
+	TNETV107X_ASR_A01,
+	TNETV107X_GPIO33,
+	TNETV107X_ASR_A02,
+	TNETV107X_GPIO34,
+	TNETV107X_ASR_A03,
+	TNETV107X_GPIO35,
+	TNETV107X_ASR_A04,
+	TNETV107X_GPIO36,
+	TNETV107X_ASR_A05,
+	TNETV107X_GPIO37,
+	TNETV107X_ASR_A06,
+	TNETV107X_GPIO38,
+	TNETV107X_ASR_A07,
+	TNETV107X_GPIO39,
+	TNETV107X_ASR_A08,
+	TNETV107X_GPIO40,
+	TNETV107X_ASR_A09,
+	TNETV107X_GPIO41,
+	TNETV107X_ASR_A10,
+	TNETV107X_GPIO42,
+	TNETV107X_ASR_A11,
+	TNETV107X_BOOT_STRP_0,
+	TNETV107X_ASR_A12,
+	TNETV107X_BOOT_STRP_1,
+	TNETV107X_ASR_A13,
+	TNETV107X_GPIO43,
+	TNETV107X_ASR_A14,
+	TNETV107X_GPIO44,
+	TNETV107X_ASR_A15,
+	TNETV107X_GPIO45,
+	TNETV107X_ASR_A16,
+	TNETV107X_GPIO46,
+	TNETV107X_ASR_A17,
+	TNETV107X_GPIO47,
+	TNETV107X_ASR_A18,
+	TNETV107X_GPIO48,
+	TNETV107X_SDIO1_DATA3_0,
+	TNETV107X_ASR_A19,
+	TNETV107X_GPIO49,
+	TNETV107X_SDIO1_DATA2_0,
+	TNETV107X_ASR_A20,
+	TNETV107X_GPIO50,
+	TNETV107X_SDIO1_DATA1_0,
+	TNETV107X_ASR_A21,
+	TNETV107X_GPIO51,
+	TNETV107X_SDIO1_DATA0_0,
+	TNETV107X_ASR_A22,
+	TNETV107X_GPIO52,
+	TNETV107X_SDIO1_CMD_0,
+	TNETV107X_ASR_A23,
+	TNETV107X_GPIO53,
+	TNETV107X_SDIO1_CLK_0,
+	TNETV107X_ASR_BA_1,
+	TNETV107X_GPIO54,
+	TNETV107X_SYS_PLL_CLK,
+	TNETV107X_ASR_CS0,
+	TNETV107X_ASR_CS1,
+	TNETV107X_ASR_CS2,
+	TNETV107X_TDM_PLL_CLK,
+	TNETV107X_ASR_CS3,
+	TNETV107X_ETH_PHY_CLK,
+	TNETV107X_ASR_D00,
+	TNETV107X_GPIO55,
+	TNETV107X_ASR_D01,
+	TNETV107X_GPIO56,
+	TNETV107X_ASR_D02,
+	TNETV107X_GPIO57,
+	TNETV107X_ASR_D03,
+	TNETV107X_GPIO58,
+	TNETV107X_ASR_D04,
+	TNETV107X_GPIO59_0,
+	TNETV107X_ASR_D05,
+	TNETV107X_GPIO60_0,
+	TNETV107X_ASR_D06,
+	TNETV107X_GPIO61_0,
+	TNETV107X_ASR_D07,
+	TNETV107X_GPIO62_0,
+	TNETV107X_ASR_D08,
+	TNETV107X_GPIO63_0,
+	TNETV107X_ASR_D09,
+	TNETV107X_GPIO64_0,
+	TNETV107X_ASR_D10,
+	TNETV107X_SDIO1_DATA3_1,
+	TNETV107X_ASR_D11,
+	TNETV107X_SDIO1_DATA2_1,
+	TNETV107X_ASR_D12,
+	TNETV107X_SDIO1_DATA1_1,
+	TNETV107X_ASR_D13,
+	TNETV107X_SDIO1_DATA0_1,
+	TNETV107X_ASR_D14,
+	TNETV107X_SDIO1_CMD_1,
+	TNETV107X_ASR_D15,
+	TNETV107X_SDIO1_CLK_1,
+	TNETV107X_ASR_OE,
+	TNETV107X_BOOT_STRP_2,
+	TNETV107X_ASR_RNW,
+	TNETV107X_GPIO29_0,
+	TNETV107X_ASR_WAIT,
+	TNETV107X_GPIO30_0,
+	TNETV107X_ASR_WE,
+	TNETV107X_BOOT_STRP_3,
+	TNETV107X_ASR_WE_DQM0,
+	TNETV107X_GPIO31,
+	TNETV107X_LCD_PD17_0,
+	TNETV107X_ASR_WE_DQM1,
+	TNETV107X_ASR_BA0_0,
+	TNETV107X_VLYNQ_CLK,
+	TNETV107X_GPIO14,
+	TNETV107X_LCD_PD19_0,
+	TNETV107X_VLYNQ_RXD0,
+	TNETV107X_GPIO15,
+	TNETV107X_LCD_PD20_0,
+	TNETV107X_VLYNQ_RXD1,
+	TNETV107X_GPIO16,
+	TNETV107X_LCD_PD21_0,
+	TNETV107X_VLYNQ_TXD0,
+	TNETV107X_GPIO17,
+	TNETV107X_LCD_PD22_0,
+	TNETV107X_VLYNQ_TXD1,
+	TNETV107X_GPIO18,
+	TNETV107X_LCD_PD23_0,
+	TNETV107X_SDIO0_CLK,
+	TNETV107X_GPIO19,
+	TNETV107X_SDIO0_CMD,
+	TNETV107X_GPIO20,
+	TNETV107X_SDIO0_DATA0,
+	TNETV107X_GPIO21,
+	TNETV107X_SDIO0_DATA1,
+	TNETV107X_GPIO22,
+	TNETV107X_SDIO0_DATA2,
+	TNETV107X_GPIO23,
+	TNETV107X_SDIO0_DATA3,
+	TNETV107X_GPIO24,
+	TNETV107X_EMU0,
+	TNETV107X_EMU1,
+	TNETV107X_RTCK,
+	TNETV107X_TRST_N,
+	TNETV107X_TCK,
+	TNETV107X_TDI,
+	TNETV107X_TDO,
+	TNETV107X_TMS,
+	TNETV107X_TDM1_CLK,
+	TNETV107X_TDM1_RX,
+	TNETV107X_TDM1_TX,
+	TNETV107X_TDM1_FS,
+	TNETV107X_KEYPAD_R0,
+	TNETV107X_KEYPAD_R1,
+	TNETV107X_KEYPAD_R2,
+	TNETV107X_KEYPAD_R3,
+	TNETV107X_KEYPAD_R4,
+	TNETV107X_KEYPAD_R5,
+	TNETV107X_KEYPAD_R6,
+	TNETV107X_GPIO12,
+	TNETV107X_KEYPAD_R7,
+	TNETV107X_GPIO10,
+	TNETV107X_KEYPAD_C0,
+	TNETV107X_KEYPAD_C1,
+	TNETV107X_KEYPAD_C2,
+	TNETV107X_KEYPAD_C3,
+	TNETV107X_KEYPAD_C4,
+	TNETV107X_KEYPAD_C5,
+	TNETV107X_KEYPAD_C6,
+	TNETV107X_GPIO13,
+	TNETV107X_TEST_CLK_IN,
+	TNETV107X_KEYPAD_C7,
+	TNETV107X_GPIO11,
+	TNETV107X_SSP0_0,
+	TNETV107X_SCC_DCLK,
+	TNETV107X_LCD_PD20_1,
+	TNETV107X_SSP0_1,
+	TNETV107X_SCC_CS_N,
+	TNETV107X_LCD_PD21_1,
+	TNETV107X_SSP0_2,
+	TNETV107X_SCC_D,
+	TNETV107X_LCD_PD22_1,
+	TNETV107X_SSP0_3,
+	TNETV107X_SCC_RESETN,
+	TNETV107X_LCD_PD23_1,
+	TNETV107X_SSP1_0,
+	TNETV107X_GPIO25,
+	TNETV107X_UART2_CTS,
+	TNETV107X_SSP1_1,
+	TNETV107X_GPIO26,
+	TNETV107X_UART2_RD,
+	TNETV107X_SSP1_2,
+	TNETV107X_GPIO27,
+	TNETV107X_UART2_RTS,
+	TNETV107X_SSP1_3,
+	TNETV107X_GPIO28,
+	TNETV107X_UART2_TD,
+	TNETV107X_UART0_CTS,
+	TNETV107X_UART0_RD,
+	TNETV107X_UART0_RTS,
+	TNETV107X_UART0_TD,
+	TNETV107X_UART1_RD,
+	TNETV107X_UART1_TD,
+	TNETV107X_LCD_AC_NCS,
+	TNETV107X_LCD_HSYNC_RNW,
+	TNETV107X_LCD_VSYNC_A0,
+	TNETV107X_LCD_MCLK,
+	TNETV107X_LCD_PD16_0,
+	TNETV107X_LCD_PCLK_E,
+	TNETV107X_LCD_PD00,
+	TNETV107X_LCD_PD01,
+	TNETV107X_LCD_PD02,
+	TNETV107X_LCD_PD03,
+	TNETV107X_LCD_PD04,
+	TNETV107X_LCD_PD05,
+	TNETV107X_LCD_PD06,
+	TNETV107X_LCD_PD07,
+	TNETV107X_LCD_PD08,
+	TNETV107X_GPIO59_1,
+	TNETV107X_LCD_PD09,
+	TNETV107X_GPIO60_1,
+	TNETV107X_LCD_PD10,
+	TNETV107X_ASR_BA0_1,
+	TNETV107X_GPIO61_1,
+	TNETV107X_LCD_PD11,
+	TNETV107X_GPIO62_1,
+	TNETV107X_LCD_PD12,
+	TNETV107X_GPIO63_1,
+	TNETV107X_LCD_PD13,
+	TNETV107X_GPIO64_1,
+	TNETV107X_LCD_PD14,
+	TNETV107X_GPIO29_1,
+	TNETV107X_LCD_PD15,
+	TNETV107X_GPIO30_1,
+	TNETV107X_EINT0,
+	TNETV107X_GPIO08,
+	TNETV107X_EINT1,
+	TNETV107X_GPIO09,
+	TNETV107X_GPIO00,
+	TNETV107X_LCD_PD20_2,
+	TNETV107X_TDM_CLK_IN_2,
+	TNETV107X_GPIO01,
+	TNETV107X_LCD_PD21_2,
+	TNETV107X_24M_CLK_OUT_1,
+	TNETV107X_GPIO02,
+	TNETV107X_LCD_PD22_2,
+	TNETV107X_GPIO03,
+	TNETV107X_LCD_PD23_2,
+	TNETV107X_GPIO04,
+	TNETV107X_LCD_PD16_1,
+	TNETV107X_USB0_RXERR,
+	TNETV107X_GPIO05,
+	TNETV107X_LCD_PD17_1,
+	TNETV107X_TDM_CLK_IN_1,
+	TNETV107X_GPIO06,
+	TNETV107X_LCD_PD18,
+	TNETV107X_24M_CLK_OUT_2,
+	TNETV107X_GPIO07,
+	TNETV107X_LCD_PD19_1,
+	TNETV107X_USB1_RXERR,
+	TNETV107X_ETH_PLL_CLK,
+	TNETV107X_MDIO,
+	TNETV107X_MDC,
+	TNETV107X_AIC_MUTE_STAT_N,
+	TNETV107X_TDM0_CLK,
+	TNETV107X_AIC_HNS_EN_N,
+	TNETV107X_TDM0_FS,
+	TNETV107X_AIC_HDS_EN_STAT_N,
+	TNETV107X_TDM0_TX,
+	TNETV107X_AIC_HNF_EN_STAT_N,
+	TNETV107X_TDM0_RX,
+};
+
+#define PINMUX(x)		(4 * (x))
+
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
 extern int davinci_cfg_reg(unsigned long reg_cfg);
+extern int davinci_cfg_reg_list(const short pins[]);
 #else
 /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
 static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
+static inline int davinci_cfg_reg_list(const short pins[])
+{
+	return 0;
+}
 #endif
 
 #endif /* __INC_MACH_MUX_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/psc.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/psc.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/psc.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/psc.h	2010-08-01 18:11:14.000000000 -0400
@@ -180,6 +180,53 @@
 #define DA8XX_LPSC1_CR_P3_SS		26
 #define DA8XX_LPSC1_L3_CBA_RAM		31
 
+/* TNETV107X LPSC Assignments */
+#define TNETV107X_LPSC_ARM			0
+#define TNETV107X_LPSC_GEM			1
+#define TNETV107X_LPSC_DDR2_PHY			2
+#define TNETV107X_LPSC_TPCC			3
+#define TNETV107X_LPSC_TPTC0			4
+#define TNETV107X_LPSC_TPTC1			5
+#define TNETV107X_LPSC_RAM			6
+#define TNETV107X_LPSC_MBX_LITE			7
+#define TNETV107X_LPSC_LCD			8
+#define TNETV107X_LPSC_ETHSS			9
+#define TNETV107X_LPSC_AEMIF			10
+#define TNETV107X_LPSC_CHIP_CFG			11
+#define TNETV107X_LPSC_TSC			12
+#define TNETV107X_LPSC_ROM			13
+#define TNETV107X_LPSC_UART2			14
+#define TNETV107X_LPSC_PKTSEC			15
+#define TNETV107X_LPSC_SECCTL			16
+#define TNETV107X_LPSC_KEYMGR			17
+#define TNETV107X_LPSC_KEYPAD			18
+#define TNETV107X_LPSC_GPIO			19
+#define TNETV107X_LPSC_MDIO			20
+#define TNETV107X_LPSC_SDIO0			21
+#define TNETV107X_LPSC_UART0			22
+#define TNETV107X_LPSC_UART1			23
+#define TNETV107X_LPSC_TIMER0			24
+#define TNETV107X_LPSC_TIMER1			25
+#define TNETV107X_LPSC_WDT_ARM			26
+#define TNETV107X_LPSC_WDT_DSP			27
+#define TNETV107X_LPSC_SSP			28
+#define TNETV107X_LPSC_TDM0			29
+#define TNETV107X_LPSC_VLYNQ			30
+#define TNETV107X_LPSC_MCDMA			31
+#define TNETV107X_LPSC_USB0			32
+#define TNETV107X_LPSC_TDM1			33
+#define TNETV107X_LPSC_DEBUGSS			34
+#define TNETV107X_LPSC_ETHSS_RGMII		35
+#define TNETV107X_LPSC_SYSTEM			36
+#define TNETV107X_LPSC_IMCOP			37
+#define TNETV107X_LPSC_SPARE			38
+#define TNETV107X_LPSC_SDIO1			39
+#define TNETV107X_LPSC_USB1			40
+#define TNETV107X_LPSC_USBSS			41
+#define TNETV107X_LPSC_DDR2_EMIF1_VRST		42
+#define TNETV107X_LPSC_DDR2_EMIF2_VCTL_RST	43
+#define TNETV107X_LPSC_MAX			44
+
 /* PSC register offsets */
 #define EPCPR		0x070
 #define PTCMD		0x120
@@ -189,13 +236,19 @@
 #define MDSTAT		0x800
 #define MDCTL		0xA00
 
+/* PSC module states */
+#define PSC_STATE_SWRSTDISABLE	0
+#define PSC_STATE_SYNCRST	1
+#define PSC_STATE_DISABLE	2
+#define PSC_STATE_ENABLE	3
+
 #define MDSTAT_STATE_MASK 0x1f
 
 #ifndef __ASSEMBLER__
 
 extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
 extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
-		unsigned int id, char enable);
+		unsigned int id, u32 next_state);
 
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/serial.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/serial.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/serial.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/serial.h	2010-08-01 18:11:14.000000000 -0400
@@ -13,7 +13,6 @@
 
 #include <mach/hardware.h>
 
-#define DAVINCI_MAX_NR_UARTS	3
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/system.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/system.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/include/mach/system.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/include/mach/system.h	2010-08-01 18:11:14.000000000 -0400
@@ -11,7 +11,7 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-extern void davinci_watchdog_reset(void);
+#include <mach/common.h>
 
 static inline void arch_idle(void)
 {
@@ -20,7 +20,8 @@
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	davinci_watchdog_reset();
+	if (davinci_soc_info.reset)
+		davinci_soc_info.reset(davinci_soc_info.reset_device);
 }
 
 #endif /* __ASM_ARCH_SYSTEM_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/io.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/io.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/io.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/io.c	2010-08-01 18:11:14.000000000 -0400
@@ -12,19 +12,29 @@
 #include <linux/io.h>
 
 #include <asm/tlb.h>
+#include <asm/mach/map.h>
 
-#define BETWEEN(p, st, sz)	((p) >= (st) && (p) < ((st) + (sz)))
-#define XLATE(p, pst, vst)	((void __iomem *)((p) - (pst) + (vst)))
+#include <mach/common.h>
 
 /*
  * Intercept ioremap() requests for addresses in our fixed mapping regions.
  */
 void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
 {
-	if (BETWEEN(p, IO_PHYS, IO_SIZE))
-		return XLATE(p, IO_PHYS, IO_VIRT);
+	struct map_desc *desc = davinci_soc_info.io_desc;
+	int desc_num = davinci_soc_info.io_desc_num;
+	int i;
 
-	return __arm_ioremap_caller(p, size, type, __builtin_return_address(0));
+	for (i = 0; i < desc_num; i++, desc++) {
+		unsigned long iophys = __pfn_to_phys(desc->pfn);
+		unsigned long iosize = desc->length;
+
+		if (p >= iophys && (p + size) <= (iophys + iosize))
+			return __io(desc->virtual + p - iophys);
+	}
+
+	return __arm_ioremap_caller(p, size, type,
+					__builtin_return_address(0));
 }
 EXPORT_SYMBOL(davinci_ioremap);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/irq.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/irq.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/irq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/irq.c	2010-08-01 18:11:14.000000000 -0400
@@ -116,6 +116,11 @@
 	unsigned i;
 	const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios;
 
+	davinci_intc_type = DAVINCI_INTC_TYPE_AINTC;
+	davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_4K);
+	if (WARN_ON(!davinci_intc_base))
+		return;
+
 	/* Clear all interrupt requests */
 	davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
 	davinci_irq_writel(~0x0, FIQ_REG1_OFFSET);
@@ -148,7 +153,7 @@
 	}
 
 	/* set up genirq dispatch for ARM INTC */
-	for (i = 0; i < DAVINCI_N_AINTC_IRQ; i++) {
+	for (i = 0; i < davinci_soc_info.intc_irq_num; i++) {
 		set_irq_chip(i, &davinci_irq_chip_0);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 		if (i != IRQ_TINT1_TINT34)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-davinci/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -7,6 +7,7 @@
 	bool
 
 config ARCH_DAVINCI_DMx
+	select CPU_ARM926T
 	bool
 
 menu "TI DaVinci Implementations"
@@ -41,6 +42,7 @@
 	select ARCH_HAS_CPUFREQ
 
 config ARCH_DAVINCI_DA8XX
+	select CPU_ARM926T
 	bool
 
 config ARCH_DAVINCI_DM365
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/mux.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/mux.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/mux.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/mux.c	2010-08-01 18:11:14.000000000 -0400
@@ -22,6 +22,8 @@
 #include <mach/mux.h>
 #include <mach/common.h>
 
+static void __iomem *pinmux_base;
+
 /*
  * Sets the DAVINCI MUX register based on the table
  */
@@ -29,14 +31,19 @@
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	void __iomem *base = soc_info->pinmux_base;
 	unsigned long flags;
 	const struct mux_config *cfg;
 	unsigned int reg_orig = 0, reg = 0;
 	unsigned int mask, warn = 0;
 
-	if (!soc_info->pinmux_pins)
-		BUG();
+	if (WARN_ON(!soc_info->pinmux_pins))
+		return -ENODEV;
+
+	if (!pinmux_base) {
+		pinmux_base = ioremap(soc_info->pinmux_base, SZ_4K);
+		if (WARN_ON(!pinmux_base))
+			return -ENOMEM;
+	}
 
 	if (index >= soc_info->pinmux_pins_num) {
 		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
@@ -57,7 +64,7 @@
 		unsigned	tmp1, tmp2;
 
 		spin_lock_irqsave(&mux_spin_lock, flags);
-		reg_orig = __raw_readl(base + cfg->mux_reg);
+		reg_orig = __raw_readl(pinmux_base + cfg->mux_reg);
 
 		mask = (cfg->mask << cfg->mask_offset);
 		tmp1 = reg_orig & mask;
@@ -69,7 +76,7 @@
 		if (tmp1 != tmp2)
 			warn = 1;
 
-		__raw_writel(reg, base + cfg->mux_reg);
+		__raw_writel(reg, pinmux_base + cfg->mux_reg);
 		spin_unlock_irqrestore(&mux_spin_lock, flags);
 	}
 
@@ -91,7 +98,7 @@
 }
 EXPORT_SYMBOL(davinci_cfg_reg);
 
-int da8xx_pinmux_setup(const short pins[])
+int __init_or_module davinci_cfg_reg_list(const short pins[])
 {
 	int i, error = -EINVAL;
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/mux.h linux-libre-2.6.35-gnu/arch/arm/mach-davinci/mux.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/mux.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/mux.h	2010-08-01 18:11:14.000000000 -0400
@@ -20,7 +20,7 @@
 			.name =  #desc,					\
 			.debug = dbg,					\
 			.mux_reg_name = "PINMUX"#muxreg,		\
-			.mux_reg = PINMUX##muxreg,			\
+			.mux_reg = PINMUX(muxreg),			\
 			.mask_offset = mode_offset,			\
 			.mask = mode_mask,				\
 			.mode = mux_mode,				\
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/psc.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/psc.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/psc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/psc.c	2010-08-01 18:11:14.000000000 -0400
@@ -38,8 +38,9 @@
 		return 0;
 	}
 
-	psc_base = soc_info->psc_bases[ctlr];
+	psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
 	mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+	iounmap(psc_base);
 
 	/* if clocked, state can be "Enable" or "SyncReset" */
 	return mdstat & BIT(12);
@@ -47,12 +48,11 @@
 
 /* Enable or disable a PSC domain */
 void davinci_psc_config(unsigned int domain, unsigned int ctlr,
-		unsigned int id, char enable)
+		unsigned int id, u32 next_state)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
 	void __iomem *psc_base;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
 
 	if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
 		pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
@@ -60,7 +60,7 @@
 		return;
 	}
 
-	psc_base = soc_info->psc_bases[ctlr];
+	psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K);
 
 	mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
 	mdctl &= ~MDSTAT_STATE_MASK;
@@ -100,4 +100,6 @@
 	do {
 		mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
 	} while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
+
+	iounmap(psc_base);
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/serial.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/serial.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/serial.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/serial.c	2010-08-01 18:11:14.000000000 -0400
@@ -35,14 +35,20 @@
 					   int offset)
 {
 	offset <<= up->regshift;
-	return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset);
+
+	WARN_ONCE(!up->membase, "unmapped read: uart[%d]\n", offset);
+
+	return (unsigned int)__raw_readl(up->membase + offset);
 }
 
 static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
 				    int value)
 {
 	offset <<= p->regshift;
-	__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
+
+	WARN_ONCE(!p->membase, "unmapped write: uart[%d]\n", offset);
+
+	__raw_writel(value, p->membase + offset);
 }
 
 static void __init davinci_serial_reset(struct plat_serial8250_port *p)
@@ -77,20 +83,32 @@
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on if not needed.
 	 */
-	for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) {
+	for (i = 0; p->flags; i++, p++) {
 		if (!(info->enabled_uarts & (1 << i)))
 			continue;
 
 		sprintf(name, "uart%d", i);
 		uart_clk = clk_get(dev, name);
-		if (IS_ERR(uart_clk))
+		if (IS_ERR(uart_clk)) {
 			printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
 					__func__, __LINE__, i);
-		else {
-			clk_enable(uart_clk);
-			p->uartclk = clk_get_rate(uart_clk);
-			davinci_serial_reset(p);
+			continue;
 		}
+
+		clk_enable(uart_clk);
+		p->uartclk = clk_get_rate(uart_clk);
+
+		if (!p->membase && p->mapbase) {
+			p->membase = ioremap(p->mapbase, SZ_4K);
+
+			if (p->membase)
+				p->flags &= ~UPF_IOREMAP;
+			else
+				pr_err("uart regs ioremap failed\n");
+		}
+
+		if (p->membase && p->type != PORT_AR7)
+			davinci_serial_reset(p);
 	}
 
 	return platform_device_register(soc_info->serial_dev);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-davinci/time.c linux-libre-2.6.35-gnu/arch/arm/mach-davinci/time.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-davinci/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-davinci/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -197,32 +197,36 @@
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
+	void __iomem *base[2];
 	int i;
 
 	/* Global init of each 64-bit timer as a whole */
 	for(i=0; i<2; i++) {
 		u32 tgcr;
-		void __iomem *base = dtip[i].base;
+
+		base[i] = ioremap(dtip[i].base, SZ_4K);
+		if (WARN_ON(!base[i]))
+			continue;
 
 		/* Disabled, Internal clock source */
-		__raw_writel(0, base + TCR);
+		__raw_writel(0, base[i] + TCR);
 
 		/* reset both timers, no pre-scaler for timer34 */
 		tgcr = 0;
-		__raw_writel(tgcr, base + TGCR);
+		__raw_writel(tgcr, base[i] + TGCR);
 
 		/* Set both timers to unchained 32-bit */
 		tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
-		__raw_writel(tgcr, base + TGCR);
+		__raw_writel(tgcr, base[i] + TGCR);
 
 		/* Unreset timers */
 		tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
 			(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
-		__raw_writel(tgcr, base + TGCR);
+		__raw_writel(tgcr, base[i] + TGCR);
 
 		/* Init both counters to zero */
-		__raw_writel(0, base + TIM12);
-		__raw_writel(0, base + TIM34);
+		__raw_writel(0, base[i] + TIM12);
+		__raw_writel(0, base[i] + TIM34);
 	}
 
 	/* Init of each timer as a 32-bit timer */
@@ -231,7 +235,9 @@
 		int timer = ID_TO_TIMER(t->id);
 		u32 irq;
 
-		t->base = dtip[timer].base;
+		t->base = base[timer];
+		if (!t->base)
+			continue;
 
 		if (IS_TIMER_BOT(t->id)) {
 			t->enamode_shift = 6;
@@ -361,13 +367,13 @@
 		}
 	}
 
-	/* init timer hw */
-	timer_init();
-
 	timer_clk = clk_get(NULL, "timer0");
 	BUG_ON(IS_ERR(timer_clk));
 	clk_enable(timer_clk);
 
+	/* init timer hw */
+	timer_init();
+
 	davinci_clock_tick_rate = clk_get_rate(timer_clk);
 
 	/* setup clocksource */
@@ -399,13 +405,16 @@
 
 
 /* reset board using watchdog timer */
-void davinci_watchdog_reset(void)
+void davinci_watchdog_reset(struct platform_device *pdev)
 {
 	u32 tgcr, wdtcr;
-	struct platform_device *pdev = &davinci_wdt_device;
-	void __iomem *base = IO_ADDRESS(pdev->resource[0].start);
+	void __iomem *base;
 	struct clk *wd_clk;
 
+	base = ioremap(pdev->resource[0].start, SZ_4K);
+	if (WARN_ON(!base))
+		return;
+
 	wd_clk = clk_get(&pdev->dev, NULL);
 	if (WARN_ON(IS_ERR(wd_clk)))
 		return;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/adssphere.c linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/adssphere.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/adssphere.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/adssphere.c	2010-08-01 18:11:14.000000000 -0400
@@ -41,7 +41,7 @@
 	.resource	= &adssphere_flash_resource,
 };
 
-static struct ep93xx_eth_data adssphere_eth_data = {
+static struct ep93xx_eth_data __initdata adssphere_eth_data = {
 	.phy_id		= 1,
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -96,6 +96,10 @@
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
+static struct clk clk_spi = {
+	.parent		= &clk_xtali,
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 static struct clk clk_pwm = {
 	.parent		= &clk_xtali,
 	.rate		= EP93XX_EXT_CLK_RATE,
@@ -186,6 +190,7 @@
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
 	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
+	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),
 	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
@@ -473,6 +478,14 @@
 	/* Initialize the pll2 derived clocks */
 	clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
 
+	/*
+	 * EP93xx SSP clock rate was doubled in version E2. For more information
+	 * see:
+	 *     http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
+	 */
+	if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)
+		clk_spi.rate /= 2;
+
 	pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
 		clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
 	pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/core.c linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/core.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/core.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/core.c	2010-08-01 18:11:14.000000000 -0400
@@ -31,10 +31,12 @@
 #include <linux/amba/serial.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
 
 #include <mach/hardware.h>
 #include <mach/fb.h>
 #include <mach/ep93xx_keypad.h>
+#include <mach/ep93xx_spi.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -222,6 +224,20 @@
 }
 EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
 
+/**
+ * ep93xx_chip_revision() - returns the EP93xx chip revision
+ *
+ * See <mach/platform.h> for more information.
+ */
+unsigned int ep93xx_chip_revision(void)
+{
+	unsigned int v;
+
+	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+	v &= EP93XX_SYSCON_SYSCFG_REV_MASK;
+	v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
+	return v;
+}
 
 /*************************************************************************
  * EP93xx peripheral handling
@@ -330,6 +346,10 @@
 	.resource	= ep93xx_ohci_resources,
 };
 
+
+/*************************************************************************
+ * EP93xx ethernet peripheral handling
+ *************************************************************************/
 static struct ep93xx_eth_data ep93xx_eth_data;
 
 static struct resource ep93xx_eth_resource[] = {
@@ -354,6 +374,12 @@
 	.resource	= ep93xx_eth_resource,
 };
 
+/**
+ * ep93xx_register_eth - Register the built-in ethernet platform device.
+ * @data:	platform specific ethernet configuration (__initdata)
+ * @copy_addr:	flag indicating that the MAC address should be copied
+ *		from the IndAd registers (as programmed by the bootloader)
+ */
 void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 {
 	if (copy_addr)
@@ -370,11 +396,19 @@
 static struct i2c_gpio_platform_data ep93xx_i2c_data;
 
 static struct platform_device ep93xx_i2c_device = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev.platform_data	= &ep93xx_i2c_data,
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &ep93xx_i2c_data,
+	},
 };
 
+/**
+ * ep93xx_register_i2c - Register the i2c platform device.
+ * @data:	platform specific i2c-gpio configuration (__initdata)
+ * @devices:	platform specific i2c bus device information (__initdata)
+ * @num:	the number of devices on the i2c bus
+ */
 void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 				struct i2c_board_info *devices, int num)
 {
@@ -398,17 +432,67 @@
 	platform_device_register(&ep93xx_i2c_device);
 }
 
+/*************************************************************************
+ * EP93xx SPI peripheral handling
+ *************************************************************************/
+static struct ep93xx_spi_info ep93xx_spi_master_data;
+
+static struct resource ep93xx_spi_resources[] = {
+	{
+		.start	= EP93XX_SPI_PHYS_BASE,
+		.end	= EP93XX_SPI_PHYS_BASE + 0x18 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_EP93XX_SSP,
+		.end	= IRQ_EP93XX_SSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ep93xx_spi_device = {
+	.name		= "ep93xx-spi",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &ep93xx_spi_master_data,
+	},
+	.num_resources	= ARRAY_SIZE(ep93xx_spi_resources),
+	.resource	= ep93xx_spi_resources,
+};
+
+/**
+ * ep93xx_register_spi() - registers spi platform device
+ * @info: ep93xx board specific spi master info (__initdata)
+ * @devices: SPI devices to register (__initdata)
+ * @num: number of SPI devices to register
+ *
+ * This function registers platform device for the EP93xx SPI controller and
+ * also makes sure that SPI pins are muxed so that I2S is not using those pins.
+ */
+void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
+				struct spi_board_info *devices, int num)
+{
+	/*
+	 * When SPI is used, we need to make sure that I2S is muxed off from
+	 * SPI pins.
+	 */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);
+
+	ep93xx_spi_master_data = *info;
+	spi_register_board_info(devices, num);
+	platform_device_register(&ep93xx_spi_device);
+}
 
 /*************************************************************************
  * EP93xx LEDs
  *************************************************************************/
 static struct gpio_led ep93xx_led_pins[] = {
 	{
-		.name			= "platform:grled",
-		.gpio			= EP93XX_GPIO_LINE_GRLED,
+		.name	= "platform:grled",
+		.gpio	= EP93XX_GPIO_LINE_GRLED,
 	}, {
-		.name			= "platform:rdled",
-		.gpio			= EP93XX_GPIO_LINE_RDLED,
+		.name	= "platform:rdled",
+		.gpio	= EP93XX_GPIO_LINE_RDLED,
 	},
 };
 
@@ -528,7 +612,7 @@
 	.name			= "ep93xx-fb",
 	.id			= -1,
 	.dev			= {
-		.platform_data	= &ep93xxfb_data,
+		.platform_data		= &ep93xxfb_data,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 		.dma_mask		= &ep93xx_fb_device.dev.coherent_dma_mask,
 	},
@@ -536,6 +620,10 @@
 	.resource		= ep93xx_fb_resource,
 };
 
+/**
+ * ep93xx_register_fb - Register the framebuffer platform device.
+ * @data:	platform specific framebuffer configuration (__initdata)
+ */
 void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 {
 	ep93xxfb_data = *data;
@@ -546,6 +634,8 @@
 /*************************************************************************
  * EP93xx matrix keypad peripheral handling
  *************************************************************************/
+static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
+
 static struct resource ep93xx_keypad_resource[] = {
 	{
 		.start	= EP93XX_KEY_MATRIX_PHYS_BASE,
@@ -559,15 +649,22 @@
 };
 
 static struct platform_device ep93xx_keypad_device = {
-	.name			= "ep93xx-keypad",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(ep93xx_keypad_resource),
-	.resource		= ep93xx_keypad_resource,
+	.name		= "ep93xx-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ep93xx_keypad_data,
+	},
+	.num_resources	= ARRAY_SIZE(ep93xx_keypad_resource),
+	.resource	= ep93xx_keypad_resource,
 };
 
+/**
+ * ep93xx_register_keypad - Register the keypad platform device.
+ * @data:	platform specific keypad configuration (__initdata)
+ */
 void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
 {
-	ep93xx_keypad_device.dev.platform_data = data;
+	ep93xx_keypad_data = *data;
 	platform_device_register(&ep93xx_keypad_device);
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/edb93xx.c linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/edb93xx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/edb93xx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/edb93xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -74,7 +74,7 @@
 	}
 }
 
-static struct ep93xx_eth_data edb93xx_eth_data = {
+static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
 	.phy_id		= 1,
 };
 
@@ -82,7 +82,7 @@
 /*************************************************************************
  * EDB93xx i2c peripheral handling
  *************************************************************************/
-static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = {
 	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
 	.sda_is_open_drain	= 0,
 	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/gesbc9312.c linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/gesbc9312.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/gesbc9312.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/gesbc9312.c	2010-08-01 18:11:14.000000000 -0400
@@ -41,7 +41,7 @@
 	.resource	= &gesbc9312_flash_resource,
 };
 
-static struct ep93xx_eth_data gesbc9312_eth_data = {
+static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
 	.phy_id		= 1,
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h	2010-08-01 18:11:14.000000000 -0400
@@ -106,6 +106,7 @@
 
 #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
+#define EP93XX_SPI_PHYS_BASE		EP93XX_APB_PHYS(0x000a0000)
 #define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
 
 #define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,27 @@
+#ifndef __ASM_MACH_EP93XX_SPI_H
+#define __ASM_MACH_EP93XX_SPI_H
+
+struct spi_device;
+
+/**
+ * struct ep93xx_spi_info - EP93xx specific SPI descriptor
+ * @num_chipselect: number of chip selects on this board, must be
+ *                  at least one
+ */
+struct ep93xx_spi_info {
+	int	num_chipselect;
+};
+
+/**
+ * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device
+ * @setup: setup the chip select mechanism
+ * @cleanup: cleanup the chip select mechanism
+ * @cs_control: control the device chip select
+ */
+struct ep93xx_spi_chip_ops {
+	int	(*setup)(struct spi_device *spi);
+	void	(*cleanup)(struct spi_device *spi);
+	void	(*cs_control)(struct spi_device *spi, int value);
+};
+
+#endif /* __ASM_MACH_EP93XX_SPI_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/include/mach/platform.h linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/include/mach/platform.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/include/mach/platform.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/include/mach/platform.h	2010-08-01 18:11:14.000000000 -0400
@@ -6,9 +6,11 @@
 
 struct i2c_gpio_platform_data;
 struct i2c_board_info;
+struct spi_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
 struct ep93xx_keypad_platform_data;
+struct ep93xx_spi_info;
 
 struct ep93xx_eth_data
 {
@@ -33,9 +35,19 @@
 	ep93xx_devcfg_set_clear(0x00, bits);
 }
 
+#define EP93XX_CHIP_REV_D0	3
+#define EP93XX_CHIP_REV_D1	4
+#define EP93XX_CHIP_REV_E0	5
+#define EP93XX_CHIP_REV_E1	6
+#define EP93XX_CHIP_REV_E2	7
+
+unsigned int ep93xx_chip_revision(void);
+
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 			 struct i2c_board_info *devices, int num);
+void ep93xx_register_spi(struct ep93xx_spi_info *info,
+			 struct spi_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/include/mach/ts72xx.h linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/include/mach/ts72xx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/include/mach/ts72xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/include/mach/ts72xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -9,9 +9,6 @@
  * febff000	22000000	4K	model number register
  * febfe000	22400000	4K	options register
  * febfd000	22800000	4K	options register #2
- * febfc000	[67]0000000	4K	NAND data register
- * febfb000	[67]0400000	4K	NAND control register
- * febfa000	[67]0800000	4K	NAND busy register
  * febf9000	10800000	4K	TS-5620 RTC index register
  * febf8000	11700000	4K	TS-5620 RTC data register
  */
@@ -41,22 +38,6 @@
 #define TS72XX_OPTIONS2_TS9420_BOOT	0x02
 
 
-#define TS72XX_NAND1_DATA_PHYS_BASE	0x60000000
-#define TS72XX_NAND2_DATA_PHYS_BASE	0x70000000
-#define TS72XX_NAND_DATA_VIRT_BASE	0xfebfc000
-#define TS72XX_NAND_DATA_SIZE		0x00001000
-
-#define TS72XX_NAND1_CONTROL_PHYS_BASE	0x60400000
-#define TS72XX_NAND2_CONTROL_PHYS_BASE	0x70400000
-#define TS72XX_NAND_CONTROL_VIRT_BASE	0xfebfb000
-#define TS72XX_NAND_CONTROL_SIZE	0x00001000
-
-#define TS72XX_NAND1_BUSY_PHYS_BASE	0x60800000
-#define TS72XX_NAND2_BUSY_PHYS_BASE	0x70800000
-#define TS72XX_NAND_BUSY_VIRT_BASE	0xfebfa000
-#define TS72XX_NAND_BUSY_SIZE		0x00001000
-
-
 #define TS72XX_RTC_INDEX_VIRT_BASE	0xfebf9000
 #define TS72XX_RTC_INDEX_PHYS_BASE	0x10800000
 #define TS72XX_RTC_INDEX_SIZE		0x00001000
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/micro9.c linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/micro9.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/micro9.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/micro9.c	2010-08-01 18:11:14.000000000 -0400
@@ -80,7 +80,7 @@
 /*************************************************************************
  * Micro9 Ethernet
  *************************************************************************/
-static struct ep93xx_eth_data micro9_eth_data = {
+static struct ep93xx_eth_data __initdata micro9_eth_data = {
 	.phy_id		= 0x1f,
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/simone.c linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/simone.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/simone.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/simone.c	2010-08-01 18:11:14.000000000 -0400
@@ -49,17 +49,17 @@
 	},
 };
 
-static struct ep93xx_eth_data simone_eth_data = {
+static struct ep93xx_eth_data __initdata simone_eth_data = {
 	.phy_id		= 1,
 };
 
-static struct ep93xxfb_mach_info simone_fb_info = {
+static struct ep93xxfb_mach_info __initdata simone_fb_info = {
 	.num_modes	= EP93XXFB_USE_MODEDB,
 	.bpp		= 16,
 	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
 };
 
-static struct i2c_gpio_platform_data simone_i2c_gpio_data = {
+static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
 	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
 	.sda_is_open_drain	= 0,
 	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/snappercl15.c linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/snappercl15.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/snappercl15.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/snappercl15.c	2010-08-01 18:11:14.000000000 -0400
@@ -125,11 +125,11 @@
 	.num_resources		= ARRAY_SIZE(snappercl15_nand_resource),
 };
 
-static struct ep93xx_eth_data snappercl15_eth_data = {
+static struct ep93xx_eth_data __initdata snappercl15_eth_data = {
 	.phy_id			= 1,
 };
 
-static struct i2c_gpio_platform_data snappercl15_i2c_gpio_data = {
+static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = {
 	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
 	.sda_is_open_drain	= 0,
 	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
@@ -145,7 +145,7 @@
 	},
 };
 
-static struct ep93xxfb_mach_info snappercl15_fb_info = {
+static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
 	.num_modes		= EP93XXFB_USE_MODEDB,
 	.bpp			= 16,
 };
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/ts72xx.c linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/ts72xx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ep93xx/ts72xx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ep93xx/ts72xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -10,12 +10,16 @@
  * your option) any later version.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/m48t86.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 
 #include <mach/hardware.h>
 #include <mach/ts72xx.h>
@@ -54,92 +58,162 @@
 	}
 };
 
-static struct map_desc ts72xx_nand_io_desc[] __initdata = {
-	{
-		.virtual	= TS72XX_NAND_DATA_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_NAND1_DATA_PHYS_BASE),
-		.length		= TS72XX_NAND_DATA_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= TS72XX_NAND_CONTROL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_NAND1_CONTROL_PHYS_BASE),
-		.length		= TS72XX_NAND_CONTROL_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= TS72XX_NAND_BUSY_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_NAND1_BUSY_PHYS_BASE),
-		.length		= TS72XX_NAND_BUSY_SIZE,
-		.type		= MT_DEVICE,
+static void __init ts72xx_map_io(void)
+{
+	ep93xx_map_io();
+	iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
+}
+
+
+/*************************************************************************
+ * NAND flash
+ *************************************************************************/
+#define TS72XX_NAND_CONTROL_ADDR_LINE	22	/* 0xN0400000 */
+#define TS72XX_NAND_BUSY_ADDR_LINE	23	/* 0xN0800000 */
+
+static void ts72xx_nand_hwcontrol(struct mtd_info *mtd,
+				  int cmd, unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		void __iomem *addr = chip->IO_ADDR_R;
+		unsigned char bits;
+
+		addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE);
+
+		bits = __raw_readb(addr) & ~0x07;
+		bits |= (ctrl & NAND_NCE) << 2;	/* bit 0 -> bit 2 */
+		bits |= (ctrl & NAND_CLE);	/* bit 1 -> bit 1 */
+		bits |= (ctrl & NAND_ALE) >> 2;	/* bit 2 -> bit 0 */
+
+		__raw_writeb(bits, addr);
 	}
-};
 
-static struct map_desc ts72xx_alternate_nand_io_desc[] __initdata = {
+	if (cmd != NAND_CMD_NONE)
+		__raw_writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int ts72xx_nand_device_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	void __iomem *addr = chip->IO_ADDR_R;
+
+	addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE);
+
+	return !!(__raw_readb(addr) & 0x20);
+}
+
+static const char *ts72xx_nand_part_probes[] = { "cmdlinepart", NULL };
+
+#define TS72XX_BOOTROM_PART_SIZE	(SZ_16K)
+#define TS72XX_REDBOOT_PART_SIZE	(SZ_2M + SZ_1M)
+
+static struct mtd_partition ts72xx_nand_parts[] = {
 	{
-		.virtual	= TS72XX_NAND_DATA_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_NAND2_DATA_PHYS_BASE),
-		.length		= TS72XX_NAND_DATA_SIZE,
-		.type		= MT_DEVICE,
+		.name		= "TS-BOOTROM",
+		.offset		= 0,
+		.size		= TS72XX_BOOTROM_PART_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
 	}, {
-		.virtual	= TS72XX_NAND_CONTROL_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_NAND2_CONTROL_PHYS_BASE),
-		.length		= TS72XX_NAND_CONTROL_SIZE,
-		.type		= MT_DEVICE,
+		.name		= "Linux",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 0,			/* filled in later */
 	}, {
-		.virtual	= TS72XX_NAND_BUSY_VIRT_BASE,
-		.pfn		= __phys_to_pfn(TS72XX_NAND2_BUSY_PHYS_BASE),
-		.length		= TS72XX_NAND_BUSY_SIZE,
-		.type		= MT_DEVICE,
-	}
+		.name		= "RedBoot",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
 };
 
-static void __init ts72xx_map_io(void)
+static void ts72xx_nand_set_parts(uint64_t size,
+				  struct platform_nand_chip *chip)
 {
-	ep93xx_map_io();
-	iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
+	/* Factory TS-72xx boards only come with 32MiB or 128MiB NAND options */
+	if (size == SZ_32M || size == SZ_128M) {
+		/* Set the "Linux" partition size */
+		ts72xx_nand_parts[1].size = size - TS72XX_REDBOOT_PART_SIZE;
 
-	/*
-	 * The TS-7200 has NOR flash, the other models have NAND flash.
-	 */
-	if (!board_is_ts7200()) {
-		if (is_ts9420_installed()) {
-			iotable_init(ts72xx_alternate_nand_io_desc,
-				ARRAY_SIZE(ts72xx_alternate_nand_io_desc));
-		} else {
-			iotable_init(ts72xx_nand_io_desc,
-				ARRAY_SIZE(ts72xx_nand_io_desc));
-		}
+		chip->partitions = ts72xx_nand_parts;
+		chip->nr_partitions = ARRAY_SIZE(ts72xx_nand_parts);
+	} else {
+		pr_warning("Unknown nand disk size:%lluMiB\n", size >> 20);
 	}
 }
 
+static struct platform_nand_data ts72xx_nand_data = {
+	.chip = {
+		.nr_chips	= 1,
+		.chip_offset	= 0,
+		.chip_delay	= 15,
+		.part_probe_types = ts72xx_nand_part_probes,
+		.set_parts	= ts72xx_nand_set_parts,
+	},
+	.ctrl = {
+		.cmd_ctrl	= ts72xx_nand_hwcontrol,
+		.dev_ready	= ts72xx_nand_device_ready,
+	},
+};
+
+static struct resource ts72xx_nand_resource[] = {
+	{
+		.start		= 0,			/* filled in later */
+		.end		= 0,			/* filled in later */
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ts72xx_nand_flash = {
+	.name			= "gen_nand",
+	.id			= -1,
+	.dev.platform_data	= &ts72xx_nand_data,
+	.resource		= ts72xx_nand_resource,
+	.num_resources		= ARRAY_SIZE(ts72xx_nand_resource),
+};
+
+
 /*************************************************************************
  * NOR flash (TS-7200 only)
  *************************************************************************/
-static struct physmap_flash_data ts72xx_flash_data = {
+static struct physmap_flash_data ts72xx_nor_data = {
 	.width		= 2,
 };
 
-static struct resource ts72xx_flash_resource = {
+static struct resource ts72xx_nor_resource = {
 	.start		= EP93XX_CS6_PHYS_BASE,
 	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device ts72xx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &ts72xx_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &ts72xx_flash_resource,
+static struct platform_device ts72xx_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev.platform_data	= &ts72xx_nor_data,
+	.resource		= &ts72xx_nor_resource,
+	.num_resources		= 1,
 };
 
 static void __init ts72xx_register_flash(void)
 {
-	if (board_is_ts7200())
-		platform_device_register(&ts72xx_flash);
+	if (board_is_ts7200()) {
+		platform_device_register(&ts72xx_nor_flash);
+	} else {
+		resource_size_t start;
+
+		if (is_ts9420_installed())
+			start = EP93XX_CS7_PHYS_BASE;
+		else
+			start = EP93XX_CS6_PHYS_BASE;
+
+		ts72xx_nand_resource[0].start = start;
+		ts72xx_nand_resource[0].end = start + SZ_16M - 1;
+
+		platform_device_register(&ts72xx_nand_flash);
+	}
 }
 
+
 static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
 {
 	__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
@@ -186,7 +260,7 @@
 	.resource	= ts72xx_wdt_resources,
 };
 
-static struct ep93xx_eth_data ts72xx_eth_data = {
+static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
 	.phy_id		= 1,
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-footbridge/common.c linux-libre-2.6.35-gnu/arch/arm/mach-footbridge/common.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-footbridge/common.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-footbridge/common.c	2010-08-01 18:11:14.000000000 -0400
@@ -232,7 +232,7 @@
 
 unsigned long __pfn_to_bus(unsigned long pfn)
 {
-	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
+	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
 }
 EXPORT_SYMBOL(__pfn_to_bus);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-footbridge/ebsa285-pci.c linux-libre-2.6.35-gnu/arch/arm/mach-footbridge/ebsa285-pci.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-footbridge/ebsa285-pci.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-footbridge/ebsa285-pci.c	2010-08-01 18:11:14.000000000 -0400
@@ -20,9 +20,9 @@
 	if (dev->vendor == PCI_VENDOR_ID_CONTAQ &&
 	    dev->device == PCI_DEVICE_ID_CONTAQ_82C693)
 		switch (PCI_FUNC(dev->devfn)) {
-			case 1:	return 14;
-			case 2:	return 15;
-			case 3:	return 12;
+		case 1:	return 14;
+		case 2:	return 15;
+		case 3:	return 12;
 		}
 
 	return irqmap_ebsa285[(slot + pin) & 3];
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-h720x/common.h linux-libre-2.6.35-gnu/arch/arm/mach-h720x/common.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-h720x/common.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-h720x/common.h	2010-08-01 18:11:14.000000000 -0400
@@ -14,13 +14,13 @@
  */
 
 extern unsigned long h720x_gettimeoffset(void);
-extern void __init h720x_init_irq (void);
+extern void __init h720x_init_irq(void);
 extern void __init h720x_map_io(void);
 
 #ifdef CONFIG_ARCH_H7202
 extern struct sys_timer h7202_timer;
 extern void __init init_hw_h7202(void);
-extern void __init h7202_init_irq (void);
+extern void __init h7202_init_irq(void);
 extern void __init h7202_init_time(void);
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-h720x/include/mach/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-h720x/include/mach/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-h720x/include/mach/debug-macro.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-h720x/include/mach/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -11,8 +11,10 @@
  *
 */
 
-		.equ    io_virt, IO_BASE
-		.equ    io_phys, IO_START
+#include <mach/hardware.h>
+
+		.equ    io_virt, IO_VIRT
+		.equ    io_phys, IO_PHYS
 
 		.macro  addruart, rx, tmp
 		mrc     p15, 0, \rx, c1, c0
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-integrator/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/clock.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,59 +0,0 @@
-/*
- *  linux/arch/arm/mach-integrator/clock.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include <asm/clkdev.h>
-#include <mach/clkdev.h>
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	struct icst525_vco vco;
-	vco = icst525_khz_to_vco(clk->params, rate / 1000);
-	return icst525_khz(clk->params, vco) * 1000;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EIO;
-
-	if (clk->setvco) {
-		struct icst525_vco vco;
-
-		vco = icst525_khz_to_vco(clk->params, rate / 1000);
-		clk->rate = icst525_khz(clk->params, vco) * 1000;
-		clk->setvco(clk, vco);
-		ret = 0;
-	}
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/common.h linux-libre-2.6.35-gnu/arch/arm/mach-integrator/common.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/common.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/common.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,2 +0,0 @@
-extern void integrator_time_init(unsigned long, unsigned int);
-extern unsigned long integrator_gettimeoffset(void);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/core.c linux-libre-2.6.35-gnu/arch/arm/mach-integrator/core.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/core.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/core.c	2010-08-01 18:11:14.000000000 -0400
@@ -24,15 +24,13 @@
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/irq.h>
-#include <asm/hardware/arm_timer.h>
 #include <mach/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
 
-#include "common.h"
-
 static struct amba_pl010_data integrator_uart_data;
 
 static struct amba_device rtc_device = {
@@ -163,8 +161,8 @@
  *  UART0  7    6
  *  UART1  5    4
  */
-#define SC_CTRLC	(IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET)
-#define SC_CTRLS	(IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET)
+#define SC_CTRLC	IO_ADDRESS(INTEGRATOR_SC_CTRLC)
+#define SC_CTRLS	IO_ADDRESS(INTEGRATOR_SC_CTRLS)
 
 static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
 {
@@ -196,7 +194,7 @@
 	.set_mctrl = integrator_uart_set_mctrl,
 };
 
-#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET
+#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_CTRL)
 
 static DEFINE_SPINLOCK(cm_lock);
 
@@ -217,120 +215,3 @@
 }
 
 EXPORT_SYMBOL(cm_control);
-
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000)
-#define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100)
-#define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200)
-#define VA_IC_BASE     IO_ADDRESS(INTEGRATOR_IC_BASE) 
-
-/*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
-#else
-#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
-#endif
-
-static unsigned long timer_reload;
-
-/*
- * Returns number of ms since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-unsigned long integrator_gettimeoffset(void)
-{
-	unsigned long ticks1, ticks2, status;
-
-	/*
-	 * Get the current number of ticks.  Note that there is a race
-	 * condition between us reading the timer and checking for
-	 * an interrupt.  We get around this by ensuring that the
-	 * counter has not reloaded between our two reads.
-	 */
-	ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
-	do {
-		ticks1 = ticks2;
-		status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
-		ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
-	} while (ticks2 > ticks1);
-
-	/*
-	 * Number of ticks since last interrupt.
-	 */
-	ticks1 = timer_reload - ticks2;
-
-	/*
-	 * Interrupt pending?  If so, we've reloaded once already.
-	 */
-	if (status & (1 << IRQ_TIMERINT1))
-		ticks1 += timer_reload;
-
-	/*
-	 * Convert the ticks to usecs
-	 */
-	return TICKS2USECS(ticks1);
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-integrator_timer_interrupt(int irq, void *dev_id)
-{
-	/*
-	 * clear the interrupt
-	 */
-	writel(1, TIMER1_VA_BASE + TIMER_INTCLR);
-
-	timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction integrator_timer_irq = {
-	.name		= "Integrator Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= integrator_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
-{
-	unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
-
-	timer_reload = reload;
-	timer_ctrl |= ctrl;
-
-	if (timer_reload > 0x100000) {
-		timer_reload >>= 8;
-		timer_ctrl |= TIMER_CTRL_DIV256;
-	} else if (timer_reload > 0x010000) {
-		timer_reload >>= 4;
-		timer_ctrl |= TIMER_CTRL_DIV16;
-	}
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
-	writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD);
-	writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE);
-	writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL);
-
-	/*
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/cpu.c linux-libre-2.6.35-gnu/arch/arm/mach-integrator/cpu.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/cpu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/cpu.c	2010-08-01 18:11:14.000000000 -0400
@@ -19,32 +19,39 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/icst.h>
 
 static struct cpufreq_driver integrator_driver;
 
-#define CM_ID  	(IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_ID_OFFSET)
-#define CM_OSC	(IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_OSC_OFFSET)
-#define CM_STAT (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_STAT_OFFSET)
-#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_ID  	IO_ADDRESS(INTEGRATOR_HDR_ID)
+#define CM_OSC	IO_ADDRESS(INTEGRATOR_HDR_OSC)
+#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT)
+#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK)
 
-static const struct icst525_params lclk_params = {
-	.ref		= 24000,
-	.vco_max	= 320000,
+static const struct icst_params lclk_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST525_VCO_MAX_5V,
+	.vco_min	= ICST525_VCO_MIN,
 	.vd_min		= 8,
 	.vd_max		= 132,
 	.rd_min		= 24,
 	.rd_max		= 24,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
 };
 
-static const struct icst525_params cclk_params = {
-	.ref		= 24000,
-	.vco_max	= 320000,
+static const struct icst_params cclk_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST525_VCO_MAX_5V,
+	.vco_min	= ICST525_VCO_MIN,
 	.vd_min		= 12,
 	.vd_max		= 160,
 	.rd_min		= 24,
 	.rd_max		= 24,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
 };
 
 /*
@@ -52,17 +59,17 @@
  */
 static int integrator_verify_policy(struct cpufreq_policy *policy)
 {
-	struct icst525_vco vco;
+	struct icst_vco vco;
 
 	cpufreq_verify_within_limits(policy, 
 				     policy->cpuinfo.min_freq, 
 				     policy->cpuinfo.max_freq);
 
-	vco = icst525_khz_to_vco(&cclk_params, policy->max);
-	policy->max = icst525_khz(&cclk_params, vco);
+	vco = icst_hz_to_vco(&cclk_params, policy->max * 1000);
+	policy->max = icst_hz(&cclk_params, vco) / 1000;
 
-	vco = icst525_khz_to_vco(&cclk_params, policy->min);
-	policy->min = icst525_khz(&cclk_params, vco);
+	vco = icst_hz_to_vco(&cclk_params, policy->min * 1000);
+	policy->min = icst_hz(&cclk_params, vco) / 1000;
 
 	cpufreq_verify_within_limits(policy, 
 				     policy->cpuinfo.min_freq, 
@@ -78,7 +85,7 @@
 {
 	cpumask_t cpus_allowed;
 	int cpu = policy->cpu;
-	struct icst525_vco vco;
+	struct icst_vco vco;
 	struct cpufreq_freqs freqs;
 	u_int cm_osc;
 
@@ -104,17 +111,17 @@
 	}
 	vco.v = cm_osc & 255;
 	vco.r = 22;
-	freqs.old = icst525_khz(&cclk_params, vco);
+	freqs.old = icst_hz(&cclk_params, vco) / 1000;
 
-	/* icst525_khz_to_vco rounds down -- so we need the next
+	/* icst_hz_to_vco rounds down -- so we need the next
 	 * larger freq in case of CPUFREQ_RELATION_L.
 	 */
 	if (relation == CPUFREQ_RELATION_L)
 		target_freq += 999;
 	if (target_freq > policy->max)
 		target_freq = policy->max;
-	vco = icst525_khz_to_vco(&cclk_params, target_freq);
-	freqs.new = icst525_khz(&cclk_params, vco);
+	vco = icst_hz_to_vco(&cclk_params, target_freq * 1000);
+	freqs.new = icst_hz(&cclk_params, vco) / 1000;
 
 	freqs.cpu = policy->cpu;
 
@@ -154,7 +161,7 @@
 	cpumask_t cpus_allowed;
 	unsigned int current_freq;
 	u_int cm_osc;
-	struct icst525_vco vco;
+	struct icst_vco vco;
 
 	cpus_allowed = current->cpus_allowed;
 
@@ -172,7 +179,7 @@
 	vco.v = cm_osc & 255;
 	vco.r = 22;
 
-	current_freq = icst525_khz(&cclk_params, vco); /* current freq */
+	current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */
 
 	set_cpus_allowed(current, cpus_allowed);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/impd1.c linux-libre-2.6.35-gnu/arch/arm/mach-integrator/impd1.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/impd1.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/impd1.c	2010-08-01 18:11:14.000000000 -0400
@@ -25,7 +25,7 @@
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/icst.h>
 #include <mach/lm.h>
 #include <mach/impd1.h>
 #include <asm/sizes.h>
@@ -41,32 +41,25 @@
 	struct clk_lookup *clks[3];
 };
 
-static const struct icst525_params impd1_vco_params = {
-	.ref		= 24000,	/* 24 MHz */
-	.vco_max	= 200000,	/* 200 MHz */
+static const struct icst_params impd1_vco_params = {
+	.ref		= 24000000,	/* 24 MHz */
+	.vco_max	= ICST525_VCO_MAX_3V,
+	.vco_min	= ICST525_VCO_MIN,
 	.vd_min		= 12,
 	.vd_max		= 519,
 	.rd_min		= 3,
 	.rd_max		= 120,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
 };
 
-static void impd1_setvco(struct clk *clk, struct icst525_vco vco)
+static void impd1_setvco(struct clk *clk, struct icst_vco vco)
 {
 	struct impd1_module *impd1 = clk->data;
-	int vconr = clk - impd1->vcos;
-	u32 val;
-
-	val = vco.v | (vco.r << 9) | (vco.s << 16);
+	u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
 
 	writel(0xa05f, impd1->base + IMPD1_LOCK);
-	switch (vconr) {
-	case 0:
-		writel(val, impd1->base + IMPD1_OSC1);
-		break;
-	case 1:
-		writel(val, impd1->base + IMPD1_OSC2);
-		break;
-	}
+	writel(val, clk->vcoreg);
 	writel(0, impd1->base + IMPD1_LOCK);
 
 #ifdef DEBUG
@@ -74,11 +67,17 @@
 	vco.r = (val >> 9) & 0x7f;
 	vco.s = (val >> 16) & 7;
 
-	pr_debug("IM-PD1: VCO%d clock is %ld kHz\n",
-		 vconr, icst525_khz(&impd1_vco_params, vco));
+	pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
+		 vconr, icst525_hz(&impd1_vco_params, vco));
 #endif
 }
 
+static const struct clk_ops impd1_clk_ops = {
+	.round	= icst_clk_round,
+	.set	= icst_clk_set,
+	.setvco	= impd1_setvco,
+};
+
 void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
 {
 	struct impd1_module *impd1 = dev_get_drvdata(dev);
@@ -374,11 +373,13 @@
 		(unsigned long)dev->resource.start);
 
 	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
+		impd1->vcos[i].ops = &impd1_clk_ops,
 		impd1->vcos[i].owner = THIS_MODULE,
 		impd1->vcos[i].params = &impd1_vco_params,
-		impd1->vcos[i].data = impd1,
-		impd1->vcos[i].setvco = impd1_setvco;
+		impd1->vcos[i].data = impd1;
 	}
+	impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
+	impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
 
 	impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
 					dev->id);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/include/mach/clkdev.h linux-libre-2.6.35-gnu/arch/arm/mach-integrator/include/mach/clkdev.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/include/mach/clkdev.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/include/mach/clkdev.h	2010-08-01 18:11:14.000000000 -0400
@@ -2,14 +2,15 @@
 #define __ASM_MACH_CLKDEV_H
 
 #include <linux/module.h>
-#include <asm/hardware/icst525.h>
+#include <plat/clock.h>
 
 struct clk {
 	unsigned long		rate;
+	const struct clk_ops	*ops;
 	struct module		*owner;
-	const struct icst525_params *params;
+	const struct icst_params *params;
+	void __iomem		*vcoreg;
 	void			*data;
-	void			(*setvco)(struct clk *, struct icst525_vco vco);
 };
 
 static inline int __clk_get(struct clk *clk)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/include/mach/entry-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-integrator/include/mach/entry-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/include/mach/entry-macro.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/include/mach/entry-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -8,6 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <mach/irqs.h>
 
  		.macro	disable_fiq
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/include/mach/hardware.h linux-libre-2.6.35-gnu/arch/arm/mach-integrator/include/mach/hardware.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/include/mach/hardware.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/include/mach/hardware.h	2010-08-01 18:11:14.000000000 -0400
@@ -23,7 +23,6 @@
 #define __ASM_ARCH_HARDWARE_H
 
 #include <asm/sizes.h>
-#include <mach/platform.h>
 
 /*
  * Where in virtual memory the IO devices (timers, system controllers
@@ -36,17 +35,19 @@
 #define PCIO_BASE		PCI_IO_VADDR
 #define PCIMEM_BASE		PCI_MEMORY_VADDR
 
-#ifdef CONFIG_MMU
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
-#else
-#define IO_ADDRESS(x) (x)
-#endif
-
 #define pcibios_assign_all_busses()	1
 
 #define PCIBIOS_MIN_IO		0x6000
 #define PCIBIOS_MIN_MEM 	0x00100000
 
+/* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
+#define IO_ADDRESS(x)	(((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
+#else
+#define IO_ADDRESS(x)	(x)
+#endif
+
+#define __io_address(n)		((void __iomem *)IO_ADDRESS(n))
+
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/include/mach/platform.h linux-libre-2.6.35-gnu/arch/arm/mach-integrator/include/mach/platform.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/include/mach/platform.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/include/mach/platform.h	2010-08-01 18:11:14.000000000 -0400
@@ -23,9 +23,6 @@
  *
  *   Integrator address map
  *
- * 	NOTE: This is a multi-hosted header file for use with uHAL and
- * 	      supported debuggers.
- *
  * ***********************************************************************/
 
 #ifndef __address_h
@@ -290,12 +287,14 @@
 #define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
 #define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
 
+#define INTEGRATOR_AP_GPIO_BASE		0x1B000000	/* GPIO */
 
-#if defined(CONFIG_ARCH_INTEGRATOR_AP)
-#define INTEGRATOR_GPIO_BASE            0x1B000000	 /*  GPIO */
-#elif defined(CONFIG_ARCH_INTEGRATOR_CP)
-#define INTEGRATOR_GPIO_BASE            0xC9000000	 /*  GPIO */
-#endif
+#define INTEGRATOR_CP_MMC_BASE		0x1C000000	/* MMC */
+#define INTEGRATOR_CP_AACI_BASE		0x1D000000	/* AACI */
+#define INTEGRATOR_CP_ETH_BASE		0xC8000000	/* Ethernet */
+#define INTEGRATOR_CP_GPIO_BASE		0xC9000000	/* GPIO */
+#define INTEGRATOR_CP_SIC_BASE		0xCA000000	/* SIC */
+#define INTEGRATOR_CP_CTL_BASE		0xCB000000	/* CP system control */
 
 /* ------------------------------------------------------------------------
  *  KMI keyboard/mouse definitions
@@ -328,20 +327,6 @@
  */
 #define PHYS_PCI_V3_BASE                0x62000000
 
-#define PCI_DRAMSIZE                    INTEGRATOR_SSRAM_SIZE
-
-/* 'export' these to UHAL */
-#define UHAL_PCI_IO                     PCI_IO_BASE
-#define UHAL_PCI_MEM                    PCI_MEM_BASE
-#define UHAL_PCI_ALLOC_IO_BASE          0x00004000
-#define UHAL_PCI_ALLOC_MEM_BASE         PCI_MEM_BASE
-#define UHAL_PCI_MAX_SLOT               20
-
-/* ========================================================================
- *  Start of uHAL definitions
- * ========================================================================
- */
-
 /* ------------------------------------------------------------------------
  *  Integrator Interrupt Controllers
  * ------------------------------------------------------------------------
@@ -389,7 +374,7 @@
  */
 
 /* ------------------------------------------------------------------------
- *  LED's - The header LED is not accessible via the uHAL API
+ *  LED's
  * ------------------------------------------------------------------------
  *
  */
@@ -402,34 +387,18 @@
 #define LED_BANK                        INTEGRATOR_DBG_LEDS
 
 /*
- *  Memory definitions - run uHAL out of SSRAM.
- *
- */
-#define uHAL_MEMORY_SIZE                INTEGRATOR_SSRAM_SIZE
-
-/*
- *  Clean base - dummy
- *
- */
-#define CLEAN_BASE                      INTEGRATOR_BOOT_ROM_HI
-
-/*
  *  Timer definitions
  *
  *  Only use timer 1 & 2
  *  (both run at 24MHz and will need the clock divider set to 16).
  *
- *  Timer 0 runs at bus frequency and therefore could vary and currently
- *  uHAL can't handle that.
- *
+ *  Timer 0 runs at bus frequency
  */
 
 #define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
 #define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
 #define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
 
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
 #define TICKS_PER_uSEC                  24
 
 /*
@@ -437,14 +406,9 @@
  *
  */
 #define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
 #define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
 
 #define INTEGRATOR_CSR_BASE             0x10000000
 #define INTEGRATOR_CSR_SIZE             0x10000000
 
 #endif
-
-/* 	END */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/integrator_ap.c linux-libre-2.6.35-gnu/arch/arm/mach-integrator/integrator_ap.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/integrator_ap.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/integrator_ap.c	2010-08-01 18:11:14.000000000 -0400
@@ -27,9 +27,14 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/platform.h>
+#include <asm/hardware/arm_timer.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
@@ -43,8 +48,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include "common.h"
-
 /* 
  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  * is the (PA >> 12).
@@ -55,7 +58,7 @@
 #define VA_IC_BASE	IO_ADDRESS(INTEGRATOR_IC_BASE) 
 #define VA_SC_BASE	IO_ADDRESS(INTEGRATOR_SC_BASE)
 #define VA_EBI_BASE	IO_ADDRESS(INTEGRATOR_EBI_BASE)
-#define VA_CMIC_BASE	IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_IC_OFFSET
+#define VA_CMIC_BASE	IO_ADDRESS(INTEGRATOR_HDR_IC)
 
 /*
  * Logical      Physical
@@ -117,8 +120,8 @@
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+		.virtual	= IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
@@ -334,14 +337,163 @@
 	}
 }
 
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
+#else
+#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
+#endif
+
+static unsigned long timer_reload;
+
+static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
+
+static cycle_t timersp_read(struct clocksource *cs)
+{
+	return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
+}
+
+static struct clocksource clocksource_timersp = {
+	.name		= "timer2",
+	.rating		= 200,
+	.read		= timersp_read,
+	.mask		= CLOCKSOURCE_MASK(16),
+	.shift		= 16,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void integrator_clocksource_init(u32 khz)
+{
+	struct clocksource *cs = &clocksource_timersp;
+	void __iomem *base = clksrc_base;
+	u32 ctrl = TIMER_CTRL_ENABLE;
+
+	if (khz >= 1500) {
+		khz /= 16;
+		ctrl = TIMER_CTRL_DIV16;
+	}
+
+	writel(ctrl, base + TIMER_CTRL);
+	writel(0xffff, base + TIMER_LOAD);
+
+	cs->mult = clocksource_khz2mult(khz, cs->shift);
+	clocksource_register(cs);
+}
+
+static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	/* clear the interrupt */
+	writel(1, clkevt_base + TIMER_INTCLR);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
+{
+	u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
+
+	BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT);
+
+	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+		writel(ctrl, clkevt_base + TIMER_CTRL);
+		writel(timer_reload, clkevt_base + TIMER_LOAD);
+		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
+	}
+
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+}
+
+static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
+{
+	unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
+
+	writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+	writel(next, clkevt_base + TIMER_LOAD);
+	writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+
+	return 0;
+}
+
+static struct clock_event_device integrator_clockevent = {
+	.name		= "timer1",
+	.shift		= 34,
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.set_mode	= clkevt_set_mode,
+	.set_next_event	= clkevt_set_next_event,
+	.rating		= 300,
+	.cpumask	= cpu_all_mask,
+};
+
+static struct irqaction integrator_timer_irq = {
+	.name		= "timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= integrator_timer_interrupt,
+	.dev_id		= &integrator_clockevent,
+};
+
+static void integrator_clockevent_init(u32 khz)
+{
+	struct clock_event_device *evt = &integrator_clockevent;
+	unsigned int ctrl = 0;
+
+	if (khz * 1000 > 0x100000 * HZ) {
+		khz /= 256;
+		ctrl |= TIMER_CTRL_DIV256;
+	} else if (khz * 1000 > 0x10000 * HZ) {
+		khz /= 16;
+		ctrl |= TIMER_CTRL_DIV16;
+	}
+
+	timer_reload = khz * 1000 / HZ;
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+
+	evt->irq = IRQ_TIMERINT1;
+	evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift);
+	evt->max_delta_ns = clockevent_delta2ns(0xffff, evt);
+	evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
+
+	setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
+	clockevents_register_device(evt);
+}
+
+/*
+ * Set up timer(s).
+ */
 static void __init ap_init_timer(void)
 {
-	integrator_time_init(1000000 * TICKS_PER_uSEC / HZ, 0);
+	u32 khz = TICKS_PER_uSEC * 1000;
+
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+
+	integrator_clocksource_init(khz);
+	integrator_clockevent_init(khz);
 }
 
 static struct sys_timer ap_timer = {
 	.init		= ap_init_timer,
-	.offset		= integrator_gettimeoffset,
 };
 
 MACHINE_START(INTEGRATOR, "ARM-Integrator")
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/integrator_cp.c linux-libre-2.6.35-gnu/arch/arm/mach-integrator/integrator_cp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/integrator_cp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/integrator_cp.c	2010-08-01 18:11:14.000000000 -0400
@@ -25,10 +25,12 @@
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/icst.h>
 
 #include <mach/cm.h>
 #include <mach/lm.h>
@@ -39,24 +41,20 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include "common.h"
-
-#define INTCP_PA_MMC_BASE		0x1c000000
-#define INTCP_PA_AACI_BASE		0x1d000000
+#include <plat/timer-sp.h>
 
 #define INTCP_PA_FLASH_BASE		0x24000000
 #define INTCP_FLASH_SIZE		SZ_32M
 
 #define INTCP_PA_CLCD_BASE		0xc0000000
 
-#define INTCP_VA_CIC_BASE		IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40
+#define INTCP_VA_CIC_BASE		IO_ADDRESS(INTEGRATOR_HDR_BASE + 0x40)
 #define INTCP_VA_PIC_BASE		IO_ADDRESS(INTEGRATOR_IC_BASE)
-#define INTCP_VA_SIC_BASE		IO_ADDRESS(0xca000000)
+#define INTCP_VA_SIC_BASE		IO_ADDRESS(INTEGRATOR_CP_SIC_BASE)
 
-#define INTCP_PA_ETH_BASE		0xc8000000
 #define INTCP_ETH_SIZE			0x10
 
-#define INTCP_VA_CTRL_BASE		IO_ADDRESS(0xcb000000)
+#define INTCP_VA_CTRL_BASE		IO_ADDRESS(INTEGRATOR_CP_CTL_BASE)
 #define INTCP_FLASHPROG			0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
@@ -71,7 +69,9 @@
  * f1600000	16000000	UART 0
  * f1700000	17000000	UART 1
  * f1a00000	1a000000	Debug LEDs
- * f1b00000	1b000000	GPIO
+ * fc900000	c9000000	GPIO
+ * fca00000	ca000000	SIC
+ * fcb00000	cb000000	CP system control
  */
 
 static struct map_desc intcp_io_desc[] __initdata = {
@@ -116,18 +116,18 @@
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+		.virtual	= IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(0xca000000),
-		.pfn		= __phys_to_pfn(0xca000000),
+		.virtual	= IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(0xcb000000),
-		.pfn		= __phys_to_pfn(0xcb000000),
+		.virtual	= IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}
@@ -266,33 +266,43 @@
 /*
  * Clock handling
  */
-#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
-#define CM_AUXOSC (IO_ADDRESS(INTEGRATOR_HDR_BASE)+0x1c)
+#define CM_LOCK		(__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_AUXOSC	(__io_address(INTEGRATOR_HDR_BASE)+0x1c)
 
-static const struct icst525_params cp_auxvco_params = {
-	.ref		= 24000,
-	.vco_max	= 320000,
+static const struct icst_params cp_auxvco_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST525_VCO_MAX_5V,
+	.vco_min	= ICST525_VCO_MIN,
 	.vd_min 	= 8,
 	.vd_max 	= 263,
 	.rd_min 	= 3,
 	.rd_max 	= 65,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
 };
 
-static void cp_auxvco_set(struct clk *clk, struct icst525_vco vco)
+static void cp_auxvco_set(struct clk *clk, struct icst_vco vco)
 {
 	u32 val;
 
-	val = readl(CM_AUXOSC) & ~0x7ffff;
+	val = readl(clk->vcoreg) & ~0x7ffff;
 	val |= vco.v | (vco.r << 9) | (vco.s << 16);
 
 	writel(0xa05f, CM_LOCK);
-	writel(val, CM_AUXOSC);
+	writel(val, clk->vcoreg);
 	writel(0, CM_LOCK);
 }
 
+static const struct clk_ops cp_auxclk_ops = {
+	.round	= icst_clk_round,
+	.set	= icst_clk_set,
+	.setvco	= cp_auxvco_set,
+};
+
 static struct clk cp_auxclk = {
+	.ops	= &cp_auxclk_ops,
 	.params	= &cp_auxvco_params,
-	.setvco = cp_auxvco_set,
+	.vcoreg	= CM_AUXOSC,
 };
 
 static struct clk_lookup cp_lookups[] = {
@@ -363,8 +373,8 @@
 
 static struct resource smc91x_resources[] = {
 	[0] = {
-		.start	= INTCP_PA_ETH_BASE,
-		.end	= INTCP_PA_ETH_BASE + INTCP_ETH_SIZE - 1,
+		.start	= INTEGRATOR_CP_ETH_BASE,
+		.end	= INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -394,8 +404,8 @@
  */
 static unsigned int mmc_status(struct device *dev)
 {
-	unsigned int status = readl(IO_ADDRESS(0xca000000) + 4);
-	writel(8, IO_ADDRESS(0xcb000000) + 8);
+	unsigned int status = readl(IO_ADDRESS(0xca000000 + 4));
+	writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8));
 
 	return status & 8;
 }
@@ -413,8 +423,8 @@
 		.platform_data = &mmc_data,
 	},
 	.res		= {
-		.start	= INTCP_PA_MMC_BASE,
-		.end	= INTCP_PA_MMC_BASE + SZ_4K - 1,
+		.start	= INTEGRATOR_CP_MMC_BASE,
+		.end	= INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	.irq		= { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
@@ -426,8 +436,8 @@
 		.init_name = "mb:1d",
 	},
 	.res		= {
-		.start	= INTCP_PA_AACI_BASE,
-		.end	= INTCP_PA_AACI_BASE + SZ_4K - 1,
+		.start	= INTEGRATOR_CP_AACI_BASE,
+		.end	= INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	.irq		= { IRQ_CP_AACIINT, NO_IRQ },
@@ -567,16 +577,22 @@
 	}
 }
 
-#define TIMER_CTRL_IE	(1 << 5)			/* Interrupt Enable */
+#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
 
 static void __init intcp_timer_init(void)
 {
-	integrator_time_init(1000000 / HZ, TIMER_CTRL_IE);
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+
+	sp804_clocksource_init(TIMER2_VA_BASE);
+	sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1);
 }
 
 static struct sys_timer cp_timer = {
 	.init		= intcp_timer_init,
-	.offset		= integrator_gettimeoffset,
 };
 
 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-integrator/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -11,6 +11,7 @@
 config ARCH_INTEGRATOR_CP
 	bool "Support Integrator/CP platform"
 	select ARCH_CINTEGRATOR
+	select ARM_TIMER_SP804
 	help
 	  Include support for the ARM(R) Integrator CP platform.
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/leds.c linux-libre-2.6.35-gnu/arch/arm/mach-integrator/leds.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/leds.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/leds.c	2010-08-01 18:11:14.000000000 -0400
@@ -27,6 +27,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-integrator/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y					:= clock.o core.o lm.o
+obj-y					:= core.o lm.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-integrator/pci_v3.c linux-libre-2.6.35-gnu/arch/arm/mach-integrator/pci_v3.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-integrator/pci_v3.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-integrator/pci_v3.c	2010-08-01 18:11:14.000000000 -0400
@@ -29,6 +29,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/irq.h>
 #include <asm/signal.h>
 #include <asm/system.h>
@@ -389,9 +390,9 @@
  * means I can't get additional information on the reason for the pm2fb
  * problems.  I suppose I'll just have to mind-meld with the machine. ;)
  */
-#define SC_PCI     (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_PCIENABLE_OFFSET)
-#define SC_LBFADDR (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x20)
-#define SC_LBFCODE (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x24)
+#define SC_PCI     IO_ADDRESS(INTEGRATOR_SC_PCIENABLE)
+#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20)
+#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24)
 
 static int
 v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-iop32x/n2100.c linux-libre-2.6.35-gnu/arch/arm/mach-iop32x/n2100.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-iop32x/n2100.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-iop32x/n2100.c	2010-08-01 18:11:14.000000000 -0400
@@ -176,7 +176,7 @@
 		.mapbase	= N2100_UART,
 		.membase	= (char *)N2100_UART,
 		.irq		= 0,
-		.flags		= UPF_SKIP_TEST,
+		.flags		= UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
 		.uartclk	= 1843200,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ixp4xx/common.c linux-libre-2.6.35-gnu/arch/arm/mach-ixp4xx/common.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ixp4xx/common.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ixp4xx/common.c	2010-08-01 18:11:14.000000000 -0400
@@ -21,7 +21,6 @@
 #include <linux/tty.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
-#include <linux/bootmem.h>
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
 #include <linux/time.h>
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/common.c linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/common.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/common.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/common.c	2010-08-01 18:11:14.000000000 -0400
@@ -305,6 +305,15 @@
 	platform_device_register(&kirkwood_nand_flash);
 }
 
+void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
+				   int (*dev_ready)(struct mtd_info *))
+{
+	kirkwood_clk_ctrl |= CGC_RUNIT;
+	kirkwood_nand_data.parts = parts;
+	kirkwood_nand_data.nr_parts = nr_parts;
+	kirkwood_nand_data.dev_ready = dev_ready;
+	platform_device_register(&kirkwood_nand_flash);
+}
 
 /*****************************************************************************
  * SoC RTC
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/common.h linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/common.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/common.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/common.h	2010-08-01 18:11:14.000000000 -0400
@@ -16,6 +16,7 @@
 struct mv_sata_platform_data;
 struct mvsdio_platform_data;
 struct mtd_partition;
+struct mtd_info;
 
 /*
  * Basic Kirkwood init functions used early by machine-setup.
@@ -41,6 +42,7 @@
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
 void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
+void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
 
 extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/guruplug-setup.c linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/guruplug-setup.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/guruplug-setup.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/guruplug-setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,131 @@
+/*
+ * arch/arm/mach-kirkwood/guruplug-setup.c
+ *
+ * Marvell GuruPlug Reference Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition guruplug_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data guruplug_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data guruplug_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data guruplug_sata_data = {
+	.n_ports	= 1,
+};
+
+static struct mvsdio_platform_data guruplug_mvsdio_data = {
+	/* unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led guruplug_led_pins[] = {
+	{
+		.name			= "guruplug:red:health",
+		.gpio			= 46,
+		.active_low		= 1,
+	},
+	{
+		.name			= "guruplug:green:health",
+		.gpio			= 47,
+		.active_low		= 1,
+	},
+	{
+		.name			= "guruplug:red:wmode",
+		.gpio			= 48,
+		.active_low		= 1,
+	},
+	{
+		.name			= "guruplug:green:wmode",
+		.gpio			= 49,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data guruplug_led_data = {
+	.leds		= guruplug_led_pins,
+	.num_leds	= ARRAY_SIZE(guruplug_led_pins),
+};
+
+static struct platform_device guruplug_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &guruplug_led_data,
+	}
+};
+
+static unsigned int guruplug_mpp_config[] __initdata = {
+	MPP46_GPIO,	/* M_RLED */
+	MPP47_GPIO,	/* M_GLED */
+	MPP48_GPIO,	/* B_RLED */
+	MPP49_GPIO,	/* B_GLED */
+	0
+};
+
+static void __init guruplug_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(guruplug_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&guruplug_ge00_data);
+	kirkwood_ge01_init(&guruplug_ge01_data);
+	kirkwood_sata_init(&guruplug_sata_data);
+	kirkwood_sdio_init(&guruplug_mvsdio_data);
+
+	platform_device_register(&guruplug_leds);
+}
+
+MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
+	/* Maintainer: Siddarth Gore <gores@marvell.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= guruplug_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -38,6 +38,12 @@
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell eSATA SheevaPlug Reference Board.
 
+config MACH_GURUPLUG
+	bool "Marvell GuruPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell GuruPlug Reference Board.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
 	help
@@ -81,6 +87,18 @@
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Internet Space v2 NAS.
 
+config MACH_NET2BIG_V2
+	bool "LaCie 2Big Network v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie 2Big Network v2 NAS.
+
+config MACH_NET5BIG_V2
+	bool "LaCie 5Big Network v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie 5Big Network v2 NAS.
+
 endmenu
 
 endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -6,10 +6,13 @@
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
+obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD)		+= openrd-setup.o
 obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o
 obj-$(CONFIG_MACH_INETSPACE_V2)		+= netspace_v2-setup.o
+obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o
+obj-$(CONFIG_MACH_NET5BIG_V2)		+= netxbig_v2-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/netxbig_v2-setup.c linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/netxbig_v2-setup.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/netxbig_v2-setup.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/netxbig_v2-setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,415 @@
+/*
+ * arch/arm/mach-kirkwood/netxbig_v2-setup.c
+ *
+ * LaCie 2Big and 5Big Network v2 board setup
+ *
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <plat/time.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
+ ****************************************************************************/
+
+static struct mtd_partition netxbig_v2_flash_parts[] = {
+	{
+		.name = "u-boot",
+		.size = MTDPART_SIZ_FULL,
+		.offset = 0,
+		.mask_flags = MTD_WRITEABLE, /* force read-only */
+	},
+};
+
+static const struct flash_platform_data netxbig_v2_flash = {
+	.type		= "mx25l4005a",
+	.name		= "spi_flash",
+	.parts		= netxbig_v2_flash_parts,
+	.nr_parts	= ARRAY_SIZE(netxbig_v2_flash_parts),
+};
+
+static struct spi_board_info __initdata netxbig_v2_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &netxbig_v2_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data netxbig_v2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data netxbig_v2_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+/*
+ * i2c addr | chip         | description
+ * 0x50     | HT24LC04     | eeprom (512B)
+ */
+
+static struct i2c_board_info __initdata netxbig_v2_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data  = &at24c04,
+	}
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data netxbig_v2_sata_data = {
+	.n_ports	= 2,
+};
+
+static int __initdata netxbig_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };
+
+static void __init netxbig_v2_sata_power_init(void)
+{
+	int i;
+	int err;
+	int hdd_nb;
+
+	if (machine_is_net2big_v2())
+		hdd_nb = 2;
+	else
+		hdd_nb = 5;
+
+	/* Power up all hard disks. */
+	for (i = 0; i < hdd_nb; i++) {
+		err = gpio_request(netxbig_v2_gpio_hdd_power[i], NULL);
+		if (err == 0) {
+			err = gpio_direction_output(
+					netxbig_v2_gpio_hdd_power[i], 1);
+			/* Free the HDD power GPIOs. This allow user-space to
+			 * configure them via the gpiolib sysfs interface. */
+			gpio_free(netxbig_v2_gpio_hdd_power[i]);
+		}
+		if (err)
+			pr_err("netxbig_v2: failed to power up HDD%d\n", i + 1);
+	}
+}
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NETXBIG_V2_GPIO_SWITCH_POWER_ON		13
+#define NETXBIG_V2_GPIO_SWITCH_POWER_OFF	15
+#define NETXBIG_V2_GPIO_FUNC_BUTTON		34
+
+#define NETXBIG_V2_SWITCH_POWER_ON		0x1
+#define NETXBIG_V2_SWITCH_POWER_OFF		0x2
+
+static struct gpio_keys_button netxbig_v2_buttons[] = {
+	[0] = {
+		.type           = EV_SW,
+		.code           = NETXBIG_V2_SWITCH_POWER_ON,
+		.gpio           = NETXBIG_V2_GPIO_SWITCH_POWER_ON,
+		.desc           = "Back power switch (on|auto)",
+		.active_low     = 1,
+	},
+	[1] = {
+		.type           = EV_SW,
+		.code           = NETXBIG_V2_SWITCH_POWER_OFF,
+		.gpio           = NETXBIG_V2_GPIO_SWITCH_POWER_OFF,
+		.desc           = "Back power switch (auto|off)",
+		.active_low     = 1,
+	},
+	[2] = {
+		.code		= KEY_OPTION,
+		.gpio		= NETXBIG_V2_GPIO_FUNC_BUTTON,
+		.desc		= "Function button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data netxbig_v2_button_data = {
+	.buttons	= netxbig_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(netxbig_v2_buttons),
+};
+
+static struct platform_device netxbig_v2_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &netxbig_v2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+/*
+ * The LEDs are controlled by a CPLD and can be configured through a GPIO
+ * extension bus:
+ *
+ * - address register : bit [0-2] -> GPIO [47-49]
+ * - data register    : bit [0-2] -> GPIO [44-46]
+ * - enable register  : GPIO 29
+ *
+ * Address register selection:
+ *
+ * addr | register
+ * ----------------------------
+ *   0  | front LED
+ *   1  | front LED brightness
+ *   2  | HDD LED brightness
+ *   3  | HDD1 LED
+ *   4  | HDD2 LED
+ *   5  | HDD3 LED
+ *   6  | HDD4 LED
+ *   7  | HDD5 LED
+ *
+ * Data register configuration:
+ *
+ * data | LED brightness
+ * -------------------------------------------------
+ *   0  | min (off)
+ *   -  | -
+ *   7  | max
+ *
+ * data | front LED mode
+ * -------------------------------------------------
+ *   0  | fix off
+ *   1  | fix blue on
+ *   2  | fix red on
+ *   3  | blink blue on=1 sec and blue off=1 sec
+ *   4  | blink red on=1 sec and red off=1 sec
+ *   5  | blink blue on=2.5 sec and red on=0.5 sec
+ *   6  | blink blue on=1 sec and red on=1 sec
+ *   7  | blink blue on=0.5 sec and blue off=2.5 sec
+ *
+ * data | HDD LED mode
+ * -------------------------------------------------
+ *   0  | fix blue on
+ *   1  | SATA activity blink
+ *   2  | fix red on
+ *   3  | blink blue on=1 sec and blue off=1 sec
+ *   4  | blink red on=1 sec and red off=1 sec
+ *   5  | blink blue on=2.5 sec and red on=0.5 sec
+ *   6  | blink blue on=1 sec and red on=1 sec
+ *   7  | blink blue on=0.5 sec and blue off=2.5 sec
+ */
+
+/*****************************************************************************
+ * Timer
+ ****************************************************************************/
+
+static void netxbig_v2_timer_init(void)
+{
+	kirkwood_tclk = 166666667;
+	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+}
+
+struct sys_timer netxbig_v2_timer = {
+	.init = netxbig_v2_timer_init,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int net2big_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Request power-off */
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_GPIO,		/* Rear power switch (on|auto) */
+	MPP14_GPIO,		/* USB fuse alarm */
+	MPP15_GPIO,		/* Rear power switch (auto|off) */
+	MPP16_GPIO,		/* SATA HDD1 power */
+	MPP17_GPIO,		/* SATA HDD2 power */
+	MPP20_SATA1_ACTn,
+	MPP21_SATA0_ACTn,
+	MPP24_GPIO,		/* USB mode select */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* CPLD extension ALE */
+	MPP34_GPIO,		/* Rear Push button */
+	MPP35_GPIO,		/* Inhibit switch power-off */
+	MPP36_GPIO,		/* SATA HDD1 presence */
+	MPP37_GPIO,		/* SATA HDD2 presence */
+	MPP40_GPIO,		/* eSATA presence */
+	MPP44_GPIO,		/* CPLD extension (data 0) */
+	MPP45_GPIO,		/* CPLD extension (data 1) */
+	MPP46_GPIO,		/* CPLD extension (data 2) */
+	MPP47_GPIO,		/* CPLD extension (addr 0) */
+	MPP48_GPIO,		/* CPLD extension (addr 1) */
+	MPP49_GPIO,		/* CPLD extension (addr 2) */
+	0
+};
+
+static unsigned int net5big_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_GPO,		/* Request power-off */
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_GPIO,		/* Rear power switch (on|auto) */
+	MPP14_GPIO,		/* USB fuse alarm */
+	MPP15_GPIO,		/* Rear power switch (auto|off) */
+	MPP16_GPIO,		/* SATA HDD1 power */
+	MPP17_GPIO,		/* SATA HDD2 power */
+	MPP20_GE1_0,
+	MPP21_GE1_1,
+	MPP22_GE1_2,
+	MPP23_GE1_3,
+	MPP24_GE1_4,
+	MPP25_GE1_5,
+	MPP26_GE1_6,
+	MPP27_GE1_7,
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* CPLD extension ALE */
+	MPP30_GE1_10,
+	MPP31_GE1_11,
+	MPP32_GE1_12,
+	MPP33_GE1_13,
+	MPP34_GPIO,		/* Rear Push button */
+	MPP35_GPIO,		/* Inhibit switch power-off */
+	MPP36_GPIO,		/* SATA HDD1 presence */
+	MPP37_GPIO,		/* SATA HDD2 presence */
+	MPP38_GPIO,		/* SATA HDD3 presence */
+	MPP39_GPIO,		/* SATA HDD4 presence */
+	MPP40_GPIO,		/* SATA HDD5 presence */
+	MPP41_GPIO,		/* SATA HDD3 power */
+	MPP42_GPIO,		/* SATA HDD4 power */
+	MPP43_GPIO,		/* SATA HDD5 power */
+	MPP44_GPIO,		/* CPLD extension (data 0) */
+	MPP45_GPIO,		/* CPLD extension (data 1) */
+	MPP46_GPIO,		/* CPLD extension (data 2) */
+	MPP47_GPIO,		/* CPLD extension (addr 0) */
+	MPP48_GPIO,		/* CPLD extension (addr 1) */
+	MPP49_GPIO,		/* CPLD extension (addr 2) */
+	0
+};
+
+#define NETXBIG_V2_GPIO_POWER_OFF		7
+
+static void netxbig_v2_power_off(void)
+{
+	gpio_set_value(NETXBIG_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init netxbig_v2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	if (machine_is_net2big_v2())
+		kirkwood_mpp_conf(net2big_v2_mpp_config);
+	else
+		kirkwood_mpp_conf(net5big_v2_mpp_config);
+
+	netxbig_v2_sata_power_init();
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&netxbig_v2_ge00_data);
+	if (machine_is_net5big_v2())
+		kirkwood_ge01_init(&netxbig_v2_ge01_data);
+	kirkwood_sata_init(&netxbig_v2_sata_data);
+	kirkwood_uart0_init();
+	spi_register_board_info(netxbig_v2_spi_slave_info,
+				ARRAY_SIZE(netxbig_v2_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, netxbig_v2_i2c_info,
+				ARRAY_SIZE(netxbig_v2_i2c_info));
+
+	platform_device_register(&netxbig_v2_gpio_buttons);
+
+	if (gpio_request(NETXBIG_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NETXBIG_V2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = netxbig_v2_power_off;
+	else
+		pr_err("netxbig_v2: failed to configure power-off GPIO\n");
+}
+
+#ifdef CONFIG_MACH_NET2BIG_V2
+MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= netxbig_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &netxbig_v2_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_NET5BIG_V2
+MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= netxbig_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &netxbig_v2_timer,
+MACHINE_END
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/tsx1x-common.c linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/tsx1x-common.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/tsx1x-common.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/tsx1x-common.c	2010-08-01 18:11:14.000000000 -0400
@@ -77,7 +77,7 @@
 	},
 };
 
-void qnap_tsx1x_register_flash(void)
+void __init qnap_tsx1x_register_flash(void)
 {
 	spi_register_board_info(qnap_tsx1x_spi_slave_info,
 				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/tsx1x-common.h linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/tsx1x-common.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-kirkwood/tsx1x-common.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-kirkwood/tsx1x-common.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,7 +1,7 @@
 #ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
 #define __ARCH_KIRKWOOD_TSX1X_COMMON_H
 
-extern void qnap_tsx1x_register_flash(void);
+extern void __init qnap_tsx1x_register_flash(void);
 extern void qnap_tsx1x_power_off(void);
 
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mmp/aspenite.c linux-libre-2.6.35-gnu/arch/arm/mach-mmp/aspenite.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mmp/aspenite.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mmp/aspenite.c	2010-08-01 18:11:14.000000000 -0400
@@ -59,6 +59,13 @@
 	/* UART1 */
 	GPIO107_UART1_RXD,
 	GPIO108_UART1_TXD,
+
+	/* SSP1 */
+	GPIO113_I2S_MCLK,
+	GPIO114_I2S_FRM,
+	GPIO115_I2S_BCLK,
+	GPIO116_I2S_RXD,
+	GPIO117_I2S_TXD,
 };
 
 static struct smc91x_platdata smc91x_info = {
@@ -123,12 +130,18 @@
 	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
 };
 
+static struct i2c_board_info aspenite_i2c_info[] __initdata = {
+	{ I2C_BOARD_INFO("wm8753", 0x1b), },
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
 	/* on-chip devices */
 	pxa168_add_uart(1);
+	pxa168_add_twsi(1, NULL, ARRAY_AND_SIZE(aspenite_i2c_info));
+	pxa168_add_ssp(1);
 	pxa168_add_nand(&aspenite_nand_info);
 
 	/* off-chip devices */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -10,7 +10,7 @@
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPIO_REG(x)	(*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
 
-#define NR_BUILTIN_GPIO	(128)
+#define NR_BUILTIN_GPIO	(192)
 
 #define gpio_to_bank(gpio)	((gpio) >> 5)
 #define gpio_to_irq(gpio)	(IRQ_GPIO_START + (gpio))
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -5,10 +5,10 @@
  * Interrupt numbers for PXA168
  */
 #define IRQ_PXA168_NONE			(-1)
-#define IRQ_PXA168_SSP3			0
-#define IRQ_PXA168_SSP2			1
-#define IRQ_PXA168_SSP1			2
-#define IRQ_PXA168_SSP0			3
+#define IRQ_PXA168_SSP4			0
+#define IRQ_PXA168_SSP3			1
+#define IRQ_PXA168_SSP2			2
+#define IRQ_PXA168_SSP1			3
 #define IRQ_PXA168_PMIC_INT		4
 #define IRQ_PXA168_RTC_INT		5
 #define IRQ_PXA168_RTC_ALARM		6
@@ -20,7 +20,7 @@
 #define IRQ_PXA168_TIMER2		14
 #define IRQ_PXA168_TIMER3		15
 #define IRQ_PXA168_CMU			16
-#define IRQ_PXA168_SSP4			17
+#define IRQ_PXA168_SSP5			17
 #define IRQ_PXA168_MSP_WAKEUP		19
 #define IRQ_PXA168_CF_WAKEUP		20
 #define IRQ_PXA168_XD_WAKEUP		21
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/mfp-mmp2.h linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/mfp-mmp2.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/mfp-mmp2.h	2010-08-01 18:11:14.000000000 -0400
@@ -9,6 +9,175 @@
 #define MFP_DRIVE_FAST		(0x8 << 13)
 
 /* GPIO */
+#define GPIO0_GPIO0		MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO1		MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO2		MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO3		MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO4		MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO5		MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO6		MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO7		MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO8		MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO9		MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO10		MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO11		MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO12		MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO13		MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO14		MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO15		MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO16		MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO17		MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO18		MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO19		MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO20		MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO21		MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO22		MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO23		MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO24		MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO25		MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO26		MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO27		MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO28		MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO29		MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO30		MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO31		MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO32		MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO33		MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO34		MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO35		MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO36		MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO37		MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO38		MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO39		MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO40		MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO41		MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO42		MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO43		MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO44		MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO45		MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO46		MFP_CFG(GPIO46, AF0)
+#define GPIO47_GPIO47		MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO48		MFP_CFG(GPIO48, AF0)
+#define GPIO49_GPIO49		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO50		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO51		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO52		MFP_CFG(GPIO52, AF0)
+#define GPIO53_GPIO53		MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO54		MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO55		MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO56		MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO57		MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO58		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO59		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO60		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO61		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO62		MFP_CFG(GPIO62, AF0)
+#define GPIO63_GPIO63		MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO64		MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO65		MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO66		MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO67		MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO68		MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO69		MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO70		MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO71		MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO72		MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO73		MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO74		MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO75		MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO76		MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO77		MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO78		MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO79		MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO80		MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO81		MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO82		MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO83		MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO84		MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO85		MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO86		MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO87		MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO88		MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO89		MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO90		MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO91		MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO92		MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO93		MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO94		MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO95		MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO96		MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO97		MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO98		MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO99		MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO100		MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO101		MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO102		MFP_CFG(GPIO102, AF1)
+#define GPIO103_GPIO103		MFP_CFG(GPIO103, AF1)
+#define GPIO104_GPIO104		MFP_CFG(GPIO104, AF1)
+#define GPIO105_GPIO105		MFP_CFG(GPIO105, AF1)
+#define GPIO106_GPIO106		MFP_CFG(GPIO106, AF1)
+#define GPIO107_GPIO107		MFP_CFG(GPIO107, AF1)
+#define GPIO108_GPIO108		MFP_CFG(GPIO108, AF1)
+#define GPIO109_GPIO109		MFP_CFG(GPIO109, AF1)
+#define GPIO110_GPIO110		MFP_CFG(GPIO110, AF1)
+#define GPIO111_GPIO111		MFP_CFG(GPIO111, AF1)
+#define GPIO112_GPIO112		MFP_CFG(GPIO112, AF1)
+#define GPIO113_GPIO113		MFP_CFG(GPIO113, AF1)
+#define GPIO114_GPIO114		MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO115		MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO116		MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO117		MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO118		MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO119		MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO120		MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO121		MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO122		MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO123		MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO124		MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO125		MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO126		MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO127		MFP_CFG(GPIO127, AF0)
+#define GPIO128_GPIO128		MFP_CFG(GPIO128, AF0)
+#define GPIO129_GPIO129		MFP_CFG(GPIO129, AF0)
+#define GPIO130_GPIO130		MFP_CFG(GPIO130, AF0)
+#define GPIO131_GPIO131		MFP_CFG(GPIO131, AF0)
+#define GPIO132_GPIO132		MFP_CFG(GPIO132, AF0)
+#define GPIO133_GPIO133		MFP_CFG(GPIO133, AF0)
+#define GPIO134_GPIO134		MFP_CFG(GPIO134, AF0)
+#define GPIO135_GPIO135		MFP_CFG(GPIO135, AF0)
+#define GPIO136_GPIO136		MFP_CFG(GPIO136, AF0)
+#define GPIO137_GPIO137		MFP_CFG(GPIO137, AF0)
+#define GPIO138_GPIO138		MFP_CFG(GPIO138, AF0)
+#define GPIO139_GPIO139		MFP_CFG(GPIO139, AF0)
+#define GPIO140_GPIO140		MFP_CFG(GPIO140, AF0)
+#define GPIO141_GPIO141		MFP_CFG(GPIO141, AF0)
+#define GPIO142_GPIO142		MFP_CFG(GPIO142, AF1)
+#define GPIO143_GPIO143		MFP_CFG(GPIO143, AF1)
+#define GPIO144_GPIO144		MFP_CFG(GPIO144, AF1)
+#define GPIO145_GPIO145		MFP_CFG(GPIO145, AF1)
+#define GPIO146_GPIO146		MFP_CFG(GPIO146, AF1)
+#define GPIO147_GPIO147		MFP_CFG(GPIO147, AF1)
+#define GPIO148_GPIO148		MFP_CFG(GPIO148, AF1)
+#define GPIO149_GPIO149		MFP_CFG(GPIO149, AF1)
+#define GPIO150_GPIO150		MFP_CFG(GPIO150, AF1)
+#define GPIO151_GPIO151		MFP_CFG(GPIO151, AF1)
+#define GPIO152_GPIO152		MFP_CFG(GPIO152, AF1)
+#define GPIO153_GPIO153		MFP_CFG(GPIO153, AF1)
+#define GPIO154_GPIO154		MFP_CFG(GPIO154, AF1)
+#define GPIO155_GPIO155		MFP_CFG(GPIO155, AF1)
+#define GPIO156_GPIO156		MFP_CFG(GPIO156, AF1)
+#define GPIO157_GPIO157		MFP_CFG(GPIO157, AF1)
+#define GPIO158_GPIO158		MFP_CFG(GPIO158, AF1)
+#define GPIO159_GPIO159		MFP_CFG(GPIO159, AF1)
+#define GPIO160_GPIO160		MFP_CFG(GPIO160, AF1)
+#define GPIO161_GPIO161		MFP_CFG(GPIO161, AF1)
+#define GPIO162_GPIO162		MFP_CFG(GPIO162, AF1)
+#define GPIO163_GPIO163		MFP_CFG(GPIO163, AF1)
+#define GPIO164_GPIO164		MFP_CFG(GPIO164, AF1)
+#define GPIO165_GPIO165		MFP_CFG(GPIO165, AF1)
+#define GPIO166_GPIO166		MFP_CFG(GPIO166, AF1)
+#define GPIO167_GPIO167		MFP_CFG(GPIO167, AF1)
+#define GPIO168_GPIO168		MFP_CFG(GPIO168, AF1)
 
 /* DFI */
 #define GPIO108_DFI_D15		MFP_CFG(GPIO108, AF0)
@@ -47,7 +216,6 @@
 
 /* Ethernet */
 #define GPIO155_SM_ADVMUX	MFP_CFG(GPIO155, AF2)
-#define GPIO155_GPIO155		MFP_CFG(GPIO155, AF1)
 
 /* UART1 */
 #define GPIO45_UART1_RXD	MFP_CFG(GPIO45, AF1)
@@ -159,6 +327,8 @@
 #define GPIO44_TWSI2_SDA	MFP_CFG_DRV(GPIO44, AF1, SLOW)
 #define GPIO71_TWSI3_SCL	MFP_CFG_DRV(GPIO71, AF1, SLOW)
 #define GPIO72_TWSI3_SDA	MFP_CFG_DRV(GPIO72, AF1, SLOW)
+#define TWSI4_SCL		MFP_CFG_DRV(TWSI4_SCL, AF0, SLOW)
+#define TWSI4_SDA		MFP_CFG_DRV(TWSI4_SDA, AF0, SLOW)
 #define GPIO99_TWSI5_SCL	MFP_CFG_DRV(GPIO99, AF4, SLOW)
 #define GPIO100_TWSI5_SDA	MFP_CFG_DRV(GPIO100, AF4, SLOW)
 #define GPIO97_TWSI6_SCL	MFP_CFG_DRV(GPIO97, AF2, SLOW)
@@ -218,21 +388,6 @@
 #define GPIO69_CAM_MCLK		MFP_CFG_DRV(GPIO69, AF1, FAST)
 #define GPIO70_CAM_PCLK		MFP_CFG_DRV(GPIO70, AF1, FAST)
 
-/* Wifi */
-#define GPIO45_GPIO45		MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO46		MFP_CFG(GPIO46, AF0)
-#define GPIO21_GPIO21		MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO22		MFP_CFG(GPIO22, AF0)
-#define GPIO55_GPIO55		MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO56		MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO57		MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO58		MFP_CFG(GPIO58, AF0)
-
-/* Codec*/
-#define GPIO23_GPIO23		MFP_CFG(GPIO23, AF0)
-
-#define GPIO101_GPIO101		MFP_CFG(GPIO101, AF0)
-
 /* PMIC */
 #define PMIC_PMIC_INT		MFP_CFG(PMIC_INT, AF0)
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/mmp2.h linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/mmp2.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/mmp2.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/mmp2.h	2010-08-01 18:11:14.000000000 -0400
@@ -39,17 +39,17 @@
 	int ret;
 
 	switch (id) {
-	case 0: d = &mmp2_device_twsi1; break;
-	case 1: d = &mmp2_device_twsi2; break;
-	case 2: d = &mmp2_device_twsi3; break;
-	case 3: d = &mmp2_device_twsi4; break;
-	case 4: d = &mmp2_device_twsi5; break;
-	case 5: d = &mmp2_device_twsi6; break;
+	case 1: d = &mmp2_device_twsi1; break;
+	case 2: d = &mmp2_device_twsi2; break;
+	case 3: d = &mmp2_device_twsi3; break;
+	case 4: d = &mmp2_device_twsi4; break;
+	case 5: d = &mmp2_device_twsi5; break;
+	case 6: d = &mmp2_device_twsi6; break;
 	default:
 		return -EINVAL;
 	}
 
-	ret = i2c_register_board_info(id, info, size);
+	ret = i2c_register_board_info(id - 1, info, size);
 	if (ret)
 		return ret;
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/pxa168.h linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/pxa168.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/pxa168.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/pxa168.h	2010-08-01 18:11:14.000000000 -0400
@@ -14,6 +14,11 @@
 extern struct pxa_device_desc pxa168_device_pwm2;
 extern struct pxa_device_desc pxa168_device_pwm3;
 extern struct pxa_device_desc pxa168_device_pwm4;
+extern struct pxa_device_desc pxa168_device_ssp1;
+extern struct pxa_device_desc pxa168_device_ssp2;
+extern struct pxa_device_desc pxa168_device_ssp3;
+extern struct pxa_device_desc pxa168_device_ssp4;
+extern struct pxa_device_desc pxa168_device_ssp5;
 extern struct pxa_device_desc pxa168_device_nand;
 
 static inline int pxa168_add_uart(int id)
@@ -67,6 +72,22 @@
 	return pxa_register_device(d, NULL, 0);
 }
 
+static inline int pxa168_add_ssp(int id)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 1: d = &pxa168_device_ssp1; break;
+	case 2: d = &pxa168_device_ssp2; break;
+	case 3: d = &pxa168_device_ssp3; break;
+	case 4: d = &pxa168_device_ssp4; break;
+	case 5: d = &pxa168_device_ssp5; break;
+	default:
+		return -EINVAL;
+	}
+	return pxa_register_device(d, NULL, 0);
+}
+
 static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
 {
 	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/regs-apbc.h linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/regs-apbc.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/regs-apbc.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/regs-apbc.h	2010-08-01 18:11:14.000000000 -0400
@@ -26,8 +26,6 @@
 #define APBC_PXA168_PWM2	APBC_REG(0x010)
 #define APBC_PXA168_PWM3	APBC_REG(0x014)
 #define APBC_PXA168_PWM4	APBC_REG(0x018)
-#define APBC_PXA168_SSP1	APBC_REG(0x01c)
-#define APBC_PXA168_SSP2	APBC_REG(0x020)
 #define APBC_PXA168_RTC		APBC_REG(0x028)
 #define APBC_PXA168_TWSI0	APBC_REG(0x02c)
 #define APBC_PXA168_KPC		APBC_REG(0x030)
@@ -35,14 +33,16 @@
 #define APBC_PXA168_AIB		APBC_REG(0x03c)
 #define APBC_PXA168_SW_JTAG	APBC_REG(0x040)
 #define APBC_PXA168_ONEWIRE	APBC_REG(0x048)
-#define APBC_PXA168_SSP3	APBC_REG(0x04c)
 #define APBC_PXA168_ASFAR	APBC_REG(0x050)
 #define APBC_PXA168_ASSAR	APBC_REG(0x054)
-#define APBC_PXA168_SSP4	APBC_REG(0x058)
-#define APBC_PXA168_SSP5	APBC_REG(0x05c)
 #define APBC_PXA168_TWSI1	APBC_REG(0x06c)
 #define APBC_PXA168_UART3	APBC_REG(0x070)
 #define APBC_PXA168_AC97	APBC_REG(0x084)
+#define APBC_PXA168_SSP1	APBC_REG(0x81c)
+#define APBC_PXA168_SSP2	APBC_REG(0x820)
+#define APBC_PXA168_SSP3	APBC_REG(0x84c)
+#define APBC_PXA168_SSP4	APBC_REG(0x858)
+#define APBC_PXA168_SSP5	APBC_REG(0x85c)
 
 /*
  * APB Clock register offsets for PXA910
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/regs-smc.h linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/regs-smc.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/regs-smc.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/regs-smc.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,37 @@
+/*
+ * linux/arch/arm/mach-mmp/include/mach/regs-smc.h
+ *
+ *  Static Memory Controller Registers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_REGS_SMC_H
+#define __ASM_MACH_REGS_SMC_H
+
+#include <mach/addr-map.h>
+
+#define SMC_VIRT_BASE		(AXI_VIRT_BASE + 0x83800)
+#define SMC_REG(x)		(SMC_VIRT_BASE + (x))
+
+#define SMC_MSC0		SMC_REG(0x0020)
+#define SMC_MSC1		SMC_REG(0x0024)
+#define SMC_SXCNFG0		SMC_REG(0x0030)
+#define SMC_SXCNFG1		SMC_REG(0x0034)
+#define SMC_MEMCLKCFG		SMC_REG(0x0068)
+#define SMC_CSDFICFG0		SMC_REG(0x0090)
+#define SMC_CSDFICFG1		SMC_REG(0x0094)
+#define SMC_CLK_RET_DEL		SMC_REG(0x00b0)
+#define SMC_ADV_RET_DEL		SMC_REG(0x00b4)
+#define SMC_CSADRMAP0		SMC_REG(0x00c0)
+#define SMC_CSADRMAP1		SMC_REG(0x00c4)
+#define SMC_WE_AP0		SMC_REG(0x00e0)
+#define SMC_WE_AP1		SMC_REG(0x00e4)
+#define SMC_OE_AP0		SMC_REG(0x00f0)
+#define SMC_OE_AP1		SMC_REG(0x00f4)
+#define SMC_ADV_AP0		SMC_REG(0x0100)
+#define SMC_ADV_AP1		SMC_REG(0x0104)
+
+#endif /* __ASM_MACH_REGS_SMC_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/timex.h linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/timex.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-mmp/include/mach/timex.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mmp/include/mach/timex.h	2010-08-01 18:11:14.000000000 -0400
@@ -6,4 +6,8 @@
  * published by the Free Software Foundation.
  */
 
+#ifdef CONFIG_CPU_MMP2
+#define CLOCK_TICK_RATE		6500000
+#else
 #define CLOCK_TICK_RATE		3250000
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mmp/jasper.c linux-libre-2.6.35-gnu/arch/arm/mach-mmp/jasper.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mmp/jasper.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mmp/jasper.c	2010-08-01 18:11:14.000000000 -0400
@@ -15,12 +15,16 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/max8649.h>
+#include <linux/mfd/max8925.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-mmp2.h>
 #include <mach/mmp2.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
@@ -58,6 +62,63 @@
 	GPIO149_ND_CLE,
 	GPIO112_ND_RDY0,
 	GPIO160_ND_RDY1,
+
+	/* PMIC */
+	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
+};
+
+static struct regulator_consumer_supply max8649_supply[] = {
+	REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data max8649_init_data = {
+	.constraints	= {
+		.name		= "vcc_core range",
+		.min_uV		= 1150000,
+		.max_uV		= 1280000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8649_supply[0],
+};
+
+static struct max8649_platform_data jasper_max8649_info = {
+	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
+	.extclk		= 0,
+	.ramp_timing	= MAX8649_RAMP_32MV,
+	.regulator	= &max8649_init_data,
+};
+
+static struct max8925_backlight_pdata jasper_backlight_data = {
+	.dual_string	= 0,
+};
+
+static struct max8925_power_pdata jasper_power_data = {
+	.batt_detect		= 0,	/* can't detect battery by ID pin */
+	.topoff_threshold	= MAX8925_TOPOFF_THR_10PER,
+	.fast_charge		= MAX8925_FCHG_1000MA,
+};
+
+static struct max8925_platform_data jasper_max8925_info = {
+	.backlight		= &jasper_backlight_data,
+	.power			= &jasper_power_data,
+	.irq_base		= IRQ_BOARD_START,
+};
+
+static struct i2c_board_info jasper_twsi1_info[] = {
+	[0] = {
+		.type		= "max8649",
+		.addr		= 0x60,
+		.platform_data	= &jasper_max8649_info,
+	},
+	[1] = {
+		.type		= "max8925",
+		.addr		= 0x3c,
+		.irq		= IRQ_MMP2_PMIC,
+		.platform_data	= &jasper_max8925_info,
+	},
 };
 
 static void __init jasper_init(void)
@@ -67,6 +128,9 @@
 	/* on-chip devices */
 	mmp2_add_uart(1);
 	mmp2_add_uart(3);
+	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mmp/mmp2.c linux-libre-2.6.35-gnu/arch/arm/mach-mmp/mmp2.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mmp/mmp2.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mmp/mmp2.c	2010-08-01 18:11:14.000000000 -0400
@@ -15,11 +15,14 @@
 #include <linux/init.h>
 #include <linux/io.h>
 
+#include <asm/hardware/cache-tauros2.h>
+
 #include <mach/addr-map.h>
 #include <mach/regs-apbc.h>
 #include <mach/regs-apmu.h>
 #include <mach/cputype.h>
 #include <mach/irqs.h>
+#include <mach/dma.h>
 #include <mach/mfp.h>
 #include <mach/gpio.h>
 #include <mach/devices.h>
@@ -32,7 +35,50 @@
 #define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
 
 static struct mfp_addr_map mmp2_addr_map[] __initdata = {
+
+	MFP_ADDR_X(GPIO0, GPIO58, 0x54),
+	MFP_ADDR_X(GPIO59, GPIO73, 0x280),
+	MFP_ADDR_X(GPIO74, GPIO101, 0x170),
+
+	MFP_ADDR(GPIO102, 0x0),
+	MFP_ADDR(GPIO103, 0x4),
+	MFP_ADDR(GPIO104, 0x1fc),
+	MFP_ADDR(GPIO105, 0x1f8),
+	MFP_ADDR(GPIO106, 0x1f4),
+	MFP_ADDR(GPIO107, 0x1f0),
+	MFP_ADDR(GPIO108, 0x21c),
+	MFP_ADDR(GPIO109, 0x218),
+	MFP_ADDR(GPIO110, 0x214),
+	MFP_ADDR(GPIO111, 0x200),
+	MFP_ADDR(GPIO112, 0x244),
+	MFP_ADDR(GPIO113, 0x25c),
+	MFP_ADDR(GPIO114, 0x164),
+	MFP_ADDR_X(GPIO115, GPIO122, 0x260),
+
+	MFP_ADDR(GPIO123, 0x148),
+	MFP_ADDR_X(GPIO124, GPIO141, 0xc),
+
+	MFP_ADDR(GPIO142, 0x8),
+	MFP_ADDR_X(GPIO143, GPIO151, 0x220),
+	MFP_ADDR_X(GPIO152, GPIO153, 0x248),
+	MFP_ADDR_X(GPIO154, GPIO155, 0x254),
+	MFP_ADDR_X(GPIO156, GPIO159, 0x14c),
+
+	MFP_ADDR(GPIO160, 0x250),
+	MFP_ADDR(GPIO161, 0x210),
+	MFP_ADDR(GPIO162, 0x20c),
+	MFP_ADDR(GPIO163, 0x208),
+	MFP_ADDR(GPIO164, 0x204),
+	MFP_ADDR(GPIO165, 0x1ec),
+	MFP_ADDR(GPIO166, 0x1e8),
+	MFP_ADDR(GPIO167, 0x1e4),
+	MFP_ADDR(GPIO168, 0x1e0),
+
+	MFP_ADDR_X(TWSI1_SCL, TWSI1_SDA, 0x140),
+	MFP_ADDR_X(TWSI4_SCL, TWSI4_SDA, 0x2bc),
+
 	MFP_ADDR(PMIC_INT, 0x2c4),
+	MFP_ADDR(CLK_REQ, 0x160),
 
 	MFP_ADDR_END,
 };
@@ -99,9 +145,13 @@
 static int __init mmp2_init(void)
 {
 	if (cpu_is_mmp2()) {
+#ifdef CONFIG_CACHE_TAUROS2
+		tauros2_init();
+#endif
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(mmp2_addr_map);
-		clks_register(ARRAY_AND_SIZE(mmp2_clkregs));
+		pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16);
+		clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
 	}
 
 	return 0;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mmp/pxa168.c linux-libre-2.6.35-gnu/arch/arm/mach-mmp/pxa168.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mmp/pxa168.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mmp/pxa168.c	2010-08-01 18:11:14.000000000 -0400
@@ -72,6 +72,11 @@
 static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
+static APBC_CLK(ssp1, PXA168_SSP1, 4, 0);
+static APBC_CLK(ssp2, PXA168_SSP2, 4, 0);
+static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
+static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
+static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
 
 static APMU_CLK(nand, NAND, 0x01db, 208000000);
 
@@ -85,6 +90,11 @@
 	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
 	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
+	INIT_CLKREG(&clk_ssp1, "pxa168-ssp.0", NULL),
+	INIT_CLKREG(&clk_ssp2, "pxa168-ssp.1", NULL),
+	INIT_CLKREG(&clk_ssp3, "pxa168-ssp.2", NULL),
+	INIT_CLKREG(&clk_ssp4, "pxa168-ssp.3", NULL),
+	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 };
 
@@ -132,3 +142,8 @@
 PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
 PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
+PXA168_DEVICE(ssp1, "pxa168-ssp", 0, SSP1, 0xd401b000, 0x40, 52, 53);
+PXA168_DEVICE(ssp2, "pxa168-ssp", 1, SSP2, 0xd401c000, 0x40, 54, 55);
+PXA168_DEVICE(ssp3, "pxa168-ssp", 2, SSP3, 0xd401f000, 0x40, 56, 57);
+PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59);
+PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/acpuclock-arm11.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/acpuclock-arm11.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/acpuclock-arm11.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/acpuclock-arm11.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,526 @@
+/* arch/arm/mach-msm/acpuclock.c
+ *
+ * MSM architecture clock driver
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ * Author: San Mehat <san@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
+
+#include "proc_comm.h"
+#include "acpuclock.h"
+
+
+#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100)
+#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104)
+#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124)
+
+/*
+ * ARM11 clock configuration for specific ACPU speeds
+ */
+
+#define ACPU_PLL_TCXO	-1
+#define ACPU_PLL_0	0
+#define ACPU_PLL_1	1
+#define ACPU_PLL_2	2
+#define ACPU_PLL_3	3
+
+#define PERF_SWITCH_DEBUG 0
+#define PERF_SWITCH_STEP_DEBUG 0
+
+struct clock_state
+{
+	struct clkctl_acpu_speed	*current_speed;
+	struct mutex			lock;
+	uint32_t			acpu_switch_time_us;
+	uint32_t			max_speed_delta_khz;
+	uint32_t			vdd_switch_time_us;
+	unsigned long			power_collapse_khz;
+	unsigned long			wait_for_irq_khz;
+};
+
+static struct clk *ebi1_clk;
+static struct clock_state drv_state = { 0 };
+
+static void __init acpuclk_init(void);
+
+/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */
+enum {
+	VDD_0 = 0,
+	VDD_1 = 1,
+	VDD_2 = 2,
+	VDD_3 = 3,
+	VDD_4 = 3,
+	VDD_5 = 3,
+	VDD_6 = 3,
+	VDD_7 = 7,
+	VDD_END
+};
+
+struct clkctl_acpu_speed {
+	unsigned int	a11clk_khz;
+	int		pll;
+	unsigned int	a11clk_src_sel;
+	unsigned int	a11clk_src_div;
+	unsigned int	ahbclk_khz;
+	unsigned int	ahbclk_div;
+	int		vdd;
+	unsigned int 	axiclk_khz;
+	unsigned long	lpj; /* loops_per_jiffy */
+/* Index in acpu_freq_tbl[] for steppings. */
+	short		down;
+	short		up;
+};
+
+/*
+ * ACPU speed table. Complete table is shown but certain speeds are commented
+ * out to optimized speed switching. Initalize loops_per_jiffy to 0.
+ *
+ * Table stepping up/down is optimized for 256mhz jumps while staying on the
+ * same PLL.
+ */
+#if (0)
+static struct clkctl_acpu_speed  acpu_freq_tbl[] = {
+	{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 },
+	{ 61440, ACPU_PLL_0,  4, 3, 61440,  0, VDD_0, 30720,  0, 0, 8 },
+	{ 81920, ACPU_PLL_0,  4, 2, 40960,  1, VDD_0, 61440,  0, 0, 8 },
+	{ 96000, ACPU_PLL_1,  1, 7, 48000,  1, VDD_0, 61440,  0, 0, 9 },
+	{ 122880, ACPU_PLL_0, 4, 1, 61440,  1, VDD_3, 61440,  0, 0, 8 },
+	{ 128000, ACPU_PLL_1, 1, 5, 64000,  1, VDD_3, 61440,  0, 0, 12 },
+	{ 176000, ACPU_PLL_2, 2, 5, 88000,  1, VDD_3, 61440,  0, 0, 11 },
+	{ 192000, ACPU_PLL_1, 1, 3, 64000,  2, VDD_3, 61440,  0, 0, 12 },
+	{ 245760, ACPU_PLL_0, 4, 0, 81920,  2, VDD_4, 61440,  0, 0, 12 },
+	{ 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 },
+	{ 264000, ACPU_PLL_2, 2, 3, 88000,  2, VDD_5, 128000, 0, 6, 13 },
+	{ 352000, ACPU_PLL_2, 2, 2, 88000,  3, VDD_5, 128000, 0, 6, 13 },
+	{ 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 },
+	{ 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 },
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+};
+#else /* Table of freq we currently use. */
+static struct clkctl_acpu_speed  acpu_freq_tbl[] = {
+	{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 },
+	{ 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 },
+	{ 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 },
+	{ 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 },
+	{ 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 },
+	{ 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 },
+	{ 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 },
+	{ 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 },
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
+};
+#endif
+
+
+#ifdef CONFIG_CPU_FREQ_TABLE
+static struct cpufreq_frequency_table freq_table[] = {
+	{ 0, 122880 },
+	{ 1, 128000 },
+	{ 2, 245760 },
+	{ 3, 384000 },
+	{ 4, 528000 },
+	{ 5, CPUFREQ_TABLE_END },
+};
+#endif
+
+static int pc_pll_request(unsigned id, unsigned on)
+{
+	int res;
+	on = !!on;
+
+#if PERF_SWITCH_DEBUG
+	if (on)
+		printk(KERN_DEBUG "Enabling PLL %d\n", id);
+	else
+		printk(KERN_DEBUG "Disabling PLL %d\n", id);
+#endif
+
+	res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);
+	if (res < 0)
+		return res;
+
+#if PERF_SWITCH_DEBUG
+	if (on)
+		printk(KERN_DEBUG "PLL %d enabled\n", id);
+	else
+		printk(KERN_DEBUG "PLL %d disabled\n", id);
+#endif
+	return res;
+}
+
+
+/*----------------------------------------------------------------------------
+ * ARM11 'owned' clock control
+ *---------------------------------------------------------------------------*/
+
+unsigned long acpuclk_power_collapse(void) {
+	int ret = acpuclk_get_rate();
+	ret *= 1000;
+	if (ret > drv_state.power_collapse_khz)
+		acpuclk_set_rate(drv_state.power_collapse_khz, 1);
+	return ret;
+}
+
+unsigned long acpuclk_get_wfi_rate(void)
+{
+	return drv_state.wait_for_irq_khz;
+}
+
+unsigned long acpuclk_wait_for_irq(void) {
+	int ret = acpuclk_get_rate();
+	ret *= 1000;
+	if (ret > drv_state.wait_for_irq_khz)
+		acpuclk_set_rate(drv_state.wait_for_irq_khz, 1);
+	return ret;
+}
+
+static int acpuclk_set_vdd_level(int vdd)
+{
+	uint32_t current_vdd;
+
+	current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07;
+
+#if PERF_SWITCH_DEBUG
+	printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n",
+	       current_vdd, vdd);
+#endif
+	writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR);
+	udelay(drv_state.vdd_switch_time_us);
+	if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) {
+#if PERF_SWITCH_DEBUG
+		printk(KERN_ERR "acpuclock: VDD set failed\n");
+#endif
+		return -EIO;
+	}
+
+#if PERF_SWITCH_DEBUG
+	printk(KERN_DEBUG "acpuclock: VDD switched\n");
+#endif
+	return 0;
+}
+
+/* Set proper dividers for the given clock speed. */
+static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) {
+	uint32_t reg_clkctl, reg_clksel, clk_div;
+
+	/* AHB_CLK_DIV */
+	clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03;
+	/*
+	 * If the new clock divider is higher than the previous, then
+	 * program the divider before switching the clock
+	 */
+	if (hunt_s->ahbclk_div > clk_div) {
+		reg_clksel = readl(A11S_CLK_SEL_ADDR);
+		reg_clksel &= ~(0x3 << 1);
+		reg_clksel |= (hunt_s->ahbclk_div << 1);
+		writel(reg_clksel, A11S_CLK_SEL_ADDR);
+	}
+	if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) {
+		/* SRC0 */
+
+		/* Program clock source */
+		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
+		reg_clkctl &= ~(0x07 << 4);
+		reg_clkctl |= (hunt_s->a11clk_src_sel << 4);
+		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
+
+		/* Program clock divider */
+		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
+		reg_clkctl &= ~0xf;
+		reg_clkctl |= hunt_s->a11clk_src_div;
+		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
+
+		/* Program clock source selection */
+		reg_clksel = readl(A11S_CLK_SEL_ADDR);
+		reg_clksel |= 1; /* CLK_SEL_SRC1NO  == SRC1 */
+		writel(reg_clksel, A11S_CLK_SEL_ADDR);
+	} else {
+		/* SRC1 */
+
+		/* Program clock source */
+		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
+		reg_clkctl &= ~(0x07 << 12);
+		reg_clkctl |= (hunt_s->a11clk_src_sel << 12);
+		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
+
+		/* Program clock divider */
+		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
+		reg_clkctl &= ~(0xf << 8);
+		reg_clkctl |= (hunt_s->a11clk_src_div << 8);
+		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
+
+		/* Program clock source selection */
+		reg_clksel = readl(A11S_CLK_SEL_ADDR);
+		reg_clksel &= ~1; /* CLK_SEL_SRC1NO  == SRC0 */
+		writel(reg_clksel, A11S_CLK_SEL_ADDR);
+	}
+
+	/*
+	 * If the new clock divider is lower than the previous, then
+	 * program the divider after switching the clock
+	 */
+	if (hunt_s->ahbclk_div < clk_div) {
+		reg_clksel = readl(A11S_CLK_SEL_ADDR);
+		reg_clksel &= ~(0x3 << 1);
+		reg_clksel |= (hunt_s->ahbclk_div << 1);
+		writel(reg_clksel, A11S_CLK_SEL_ADDR);
+	}
+}
+
+int acpuclk_set_rate(unsigned long rate, int for_power_collapse)
+{
+	uint32_t reg_clkctl;
+	struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s;
+	int rc = 0;
+	unsigned int plls_enabled = 0, pll;
+
+	strt_s = cur_s = drv_state.current_speed;
+
+	WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n");
+	if (cur_s == NULL)
+		return -ENOENT;
+
+	if (rate == (cur_s->a11clk_khz * 1000))
+		return 0;
+
+	for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) {
+		if (tgt_s->a11clk_khz == (rate / 1000))
+			break;
+	}
+
+	if (tgt_s->a11clk_khz == 0)
+		return -EINVAL;
+
+	/* Choose the highest speed speed at or below 'rate' with same PLL. */
+	if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) {
+		while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll)
+			tgt_s--;
+	}
+
+	if (strt_s->pll != ACPU_PLL_TCXO)
+		plls_enabled |= 1 << strt_s->pll;
+
+	if (!for_power_collapse) {
+		mutex_lock(&drv_state.lock);
+		if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) {
+			rc = pc_pll_request(tgt_s->pll, 1);
+			if (rc < 0) {
+				pr_err("PLL%d enable failed (%d)\n",
+					tgt_s->pll, rc);
+				goto out;
+			}
+			plls_enabled |= 1 << tgt_s->pll;
+		}
+		/* Increase VDD if needed. */
+		if (tgt_s->vdd > cur_s->vdd) {
+			if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) {
+				printk(KERN_ERR "Unable to switch ACPU vdd\n");
+				goto out;
+			}
+		}
+	}
+
+	/* Set wait states for CPU inbetween frequency changes */
+	reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
+	reg_clkctl |= (100 << 16); /* set WT_ST_CNT */
+	writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
+
+#if PERF_SWITCH_DEBUG
+	printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n",
+	       strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000);
+#endif
+
+	while (cur_s != tgt_s) {
+		/*
+		 * Always jump to target freq if within 256mhz, regulardless of
+		 * PLL. If differnece is greater, use the predefinied
+		 * steppings in the table.
+		 */
+		int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz));
+		if (d > drv_state.max_speed_delta_khz) {
+			/* Step up or down depending on target vs current. */
+			int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ?
+				cur_s->up : cur_s->down;
+			if (clk_index < 0) { /* This should not happen. */
+				printk(KERN_ERR "cur:%u target: %u\n",
+					cur_s->a11clk_khz, tgt_s->a11clk_khz);
+				rc = -EINVAL;
+				goto out;
+			}
+			cur_s = &acpu_freq_tbl[clk_index];
+		} else {
+			cur_s = tgt_s;
+		}
+#if PERF_SWITCH_STEP_DEBUG
+		printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n",
+			__FUNCTION__, cur_s->a11clk_khz, cur_s->pll);
+#endif
+		if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO
+		    && !(plls_enabled & (1 << cur_s->pll))) {
+			rc = pc_pll_request(cur_s->pll, 1);
+			if (rc < 0) {
+				pr_err("PLL%d enable failed (%d)\n",
+					cur_s->pll, rc);
+				goto out;
+			}
+			plls_enabled |= 1 << cur_s->pll;
+		}
+
+		acpuclk_set_div(cur_s);
+		drv_state.current_speed = cur_s;
+		/* Re-adjust lpj for the new clock speed. */
+		loops_per_jiffy = cur_s->lpj;
+		udelay(drv_state.acpu_switch_time_us);
+	}
+
+	/* Nothing else to do for power collapse. */
+	if (for_power_collapse)
+		return 0;
+
+	/* Disable PLLs we are not using anymore. */
+	plls_enabled &= ~(1 << tgt_s->pll);
+	for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++)
+		if (plls_enabled & (1 << pll)) {
+			rc = pc_pll_request(pll, 0);
+			if (rc < 0) {
+				pr_err("PLL%d disable failed (%d)\n", pll, rc);
+				goto out;
+			}
+		}
+
+	/* Change the AXI bus frequency if we can. */
+	if (strt_s->axiclk_khz != tgt_s->axiclk_khz) {
+		rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000);
+		if (rc < 0)
+			pr_err("Setting AXI min rate failed!\n");
+	}
+
+	/* Drop VDD level if we can. */
+	if (tgt_s->vdd < strt_s->vdd) {
+		if (acpuclk_set_vdd_level(tgt_s->vdd) < 0)
+			printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n");
+	}
+
+#if PERF_SWITCH_DEBUG
+	printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__);
+#endif
+out:
+	if (!for_power_collapse)
+		mutex_unlock(&drv_state.lock);
+	return rc;
+}
+
+static void __init acpuclk_init(void)
+{
+	struct clkctl_acpu_speed *speed;
+	uint32_t div, sel;
+	int rc;
+
+	/*
+	 * Determine the rate of ACPU clock
+	 */
+
+	if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */
+		/* CLK_SRC0_SEL */
+		sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7;
+		/* CLK_SRC0_DIV */
+		div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f;
+	} else {
+		/* CLK_SRC1_SEL */
+		sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07;
+		/* CLK_SRC1_DIV */
+		div = readl(A11S_CLK_CNTL_ADDR) & 0x0f;
+	}
+
+	for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) {
+		if (speed->a11clk_src_sel == sel
+		 && (speed->a11clk_src_div == div))
+			break;
+	}
+	if (speed->a11clk_khz == 0) {
+		printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n");
+		return;
+	}
+
+	drv_state.current_speed = speed;
+
+	rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000);
+	if (rc < 0)
+		pr_err("Setting AXI min rate failed!\n");
+
+	printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz);
+}
+
+unsigned long acpuclk_get_rate(void)
+{
+	WARN_ONCE(drv_state.current_speed == NULL,
+		  "acpuclk_get_rate: not initialized\n");
+	if (drv_state.current_speed)
+		return drv_state.current_speed->a11clk_khz;
+	else
+		return 0;
+}
+
+uint32_t acpuclk_get_switch_time(void)
+{
+	return drv_state.acpu_switch_time_us;
+}
+
+/*----------------------------------------------------------------------------
+ * Clock driver initialization
+ *---------------------------------------------------------------------------*/
+
+/* Initalize the lpj field in the acpu_freq_tbl. */
+static void __init lpj_init(void)
+{
+	int i;
+	const struct clkctl_acpu_speed *base_clk = drv_state.current_speed;
+	for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) {
+		acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy,
+						base_clk->a11clk_khz,
+						acpu_freq_tbl[i].a11clk_khz);
+	}
+}
+
+void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata)
+{
+	pr_info("acpu_clock_init()\n");
+
+	ebi1_clk = clk_get(NULL, "ebi1_clk");
+
+	mutex_init(&drv_state.lock);
+	drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us;
+	drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz;
+	drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us;
+	drv_state.power_collapse_khz = clkdata->power_collapse_khz;
+	drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz;
+	acpuclk_init();
+	lpj_init();
+#ifdef CONFIG_CPU_FREQ_TABLE
+	cpufreq_frequency_table_get_attr(freq_table, smp_processor_id());
+#endif
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/acpuclock.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/acpuclock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/acpuclock.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/acpuclock.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,32 @@
+/* arch/arm/mach-msm/acpuclock.h
+ *
+ * MSM architecture clock driver header
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ * Author: San Mehat <san@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
+#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H
+
+int acpuclk_set_rate(unsigned long rate, int for_power_collapse);
+unsigned long acpuclk_get_rate(void);
+uint32_t acpuclk_get_switch_time(void);
+unsigned long acpuclk_wait_for_irq(void);
+unsigned long acpuclk_power_collapse(void);
+unsigned long acpuclk_get_wfi_rate(void);
+
+
+#endif
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-dream.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-dream.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-dream.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-dream.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,93 +0,0 @@
-/* linux/arch/arm/mach-msm/board-dream.c
- *
- * Copyright (C) 2009 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-
-#include <mach/board.h>
-#include <mach/hardware.h>
-#include <mach/msm_iomap.h>
-
-#include "devices.h"
-#include "board-dream.h"
-
-static struct platform_device *devices[] __initdata = {
-	&msm_device_uart3,
-	&msm_device_smd,
-	&msm_device_nand,
-	&msm_device_hsusb,
-	&msm_device_i2c,
-};
-
-extern struct sys_timer msm_timer;
-
-static void __init trout_init_irq(void)
-{
-	msm_init_irq();
-}
-
-static void __init trout_fixup(struct machine_desc *desc, struct tag *tags,
-				char **cmdline, struct meminfo *mi)
-{
-	mi->nr_banks = 1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
-	mi->bank[0].size = (101*1024*1024);
-}
-
-static void __init trout_init(void)
-{
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static struct map_desc trout_io_desc[] __initdata = {
-	{
-		.virtual = TROUT_CPLD_BASE,
-		.pfn     = __phys_to_pfn(TROUT_CPLD_START),
-		.length  = TROUT_CPLD_SIZE,
-		.type    = MT_DEVICE_NONSHARED
-	}
-};
-
-static void __init trout_map_io(void)
-{
-	msm_map_common_io();
-	iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
-
-#ifdef CONFIG_MSM_DEBUG_UART3
-	/* route UART3 to the "H2W" extended usb connector */
-	writeb(0x80, TROUT_CPLD_BASE + 0x00);
-#endif
-
-	msm_clock_init();
-}
-
-MACHINE_START(TROUT, "HTC Dream")
-	.phys_io	= MSM_DEBUG_UART_PHYS,
-	.io_pg_offst	= ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
-	.boot_params	= 0x10000100,
-	.fixup		= trout_fixup,
-	.map_io		= trout_map_io,
-	.init_irq	= trout_init_irq,
-	.init_machine	= trout_init,
-	.timer		= &msm_timer,
-MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-dream.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-dream.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-dream.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-dream.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,5 +0,0 @@
-
-#define TROUT_CPLD_BASE   0xE8100000
-#define TROUT_CPLD_START  0x98000000
-#define TROUT_CPLD_SIZE   SZ_4K
-
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-halibut.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-halibut.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-halibut.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-halibut.c	2010-08-01 18:11:14.000000000 -0400
@@ -26,6 +26,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
+#include <asm/setup.h>
 
 #include <mach/irqs.h>
 #include <mach/board.h>
@@ -77,14 +78,28 @@
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
+static void __init halibut_fixup(struct machine_desc *desc, struct tag *tags,
+				 char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks=1;
+	mi->bank[0].start = PHYS_OFFSET;
+	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
+	mi->bank[0].size = (101*1024*1024);
+}
+
 static void __init halibut_map_io(void)
 {
 	msm_map_common_io();
-	msm_clock_init();
+	msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
 }
 
 MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
 	.boot_params	= 0x10000100,
+	.fixup		= halibut_fixup,
 	.map_io		= halibut_map_io,
 	.init_irq	= halibut_init_irq,
 	.init_machine	= halibut_init,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-mahimahi.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-mahimahi.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-mahimahi.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-mahimahi.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,87 @@
+/* linux/arch/arm/mach-msm/board-mahimahi.c
+ *
+ * Copyright (C) 2009 Google, Inc.
+ * Copyright (C) 2009 HTC Corporation.
+ * Author: Dima Zavin <dima@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/hardware.h>
+#include <mach/system.h>
+
+#include "board-mahimahi.h"
+#include "devices.h"
+#include "proc_comm.h"
+
+static uint debug_uart;
+
+module_param_named(debug_uart, debug_uart, uint, 0);
+
+static struct platform_device *devices[] __initdata = {
+#if !defined(CONFIG_MSM_SERIAL_DEBUGGER)
+	&msm_device_uart1,
+#endif
+	&msm_device_uart_dm1,
+	&msm_device_nand,
+};
+
+static void __init mahimahi_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mahimahi_fixup(struct machine_desc *desc, struct tag *tags,
+				 char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks = 2;
+	mi->bank[0].start = PHYS_OFFSET;
+	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
+	mi->bank[0].size = (219*1024*1024);
+	mi->bank[1].start = MSM_HIGHMEM_BASE;
+	mi->bank[1].node = PHYS_TO_NID(MSM_HIGHMEM_BASE);
+	mi->bank[1].size = MSM_HIGHMEM_SIZE;
+}
+
+static void __init mahimahi_map_io(void)
+{
+	msm_map_common_io();
+	msm_clock_init();
+}
+
+extern struct sys_timer msm_timer;
+
+MACHINE_START(MAHIMAHI, "mahimahi")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= 0x20000100,
+	.fixup		= mahimahi_fixup,
+	.map_io		= mahimahi_map_io,
+	.init_irq	= msm_init_irq,
+	.init_machine	= mahimahi_init,
+	.timer		= &msm_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-msm7x27.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-msm7x27.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-msm7x27.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-msm7x27.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/power_supply.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <asm/setup.h>
+#ifdef CONFIG_CACHE_L2X0
+#include <asm/hardware/cache-l2x0.h>
+#endif
+
+#include <mach/vreg.h>
+#include <mach/mpp.h>
+#include <mach/gpio.h>
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include "devices.h"
+#include "socinfo.h"
+#include "clock.h"
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= 0x9C004300,
+		.end	= 0x9C0043ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= MSM_GPIO_TO_INT(132),
+		.end	= MSM_GPIO_TO_INT(132),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_uart3,
+	&msm_device_smd,
+	&msm_device_dmov,
+	&msm_device_nand,
+	&smc91x_device,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init msm7x2x_init_irq(void)
+{
+	msm_init_irq();
+}
+
+static void __init msm7x2x_init(void)
+{
+	if (socinfo_init() < 0)
+		BUG();
+
+	if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) {
+		smc91x_resources[0].start = 0x98000300;
+		smc91x_resources[0].end = 0x980003ff;
+		smc91x_resources[1].start = MSM_GPIO_TO_INT(85);
+		smc91x_resources[1].end = MSM_GPIO_TO_INT(85);
+		if (gpio_tlmm_config(GPIO_CFG(85, 0,
+					      GPIO_INPUT,
+					      GPIO_PULL_DOWN,
+					      GPIO_2MA),
+				     GPIO_ENABLE)) {
+			printk(KERN_ERR
+			       "%s: Err: Config GPIO-85 INT\n",
+				__func__);
+		}
+	}
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init msm7x2x_map_io(void)
+{
+	msm_map_common_io();
+	/* Technically dependent on the SoC but using machine_is
+	 * macros since socinfo is not available this early and there
+	 * are plans to restructure the code which will eliminate the
+	 * need for socinfo.
+	 */
+	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())
+		msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);
+
+	if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa())
+		msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25);
+
+#ifdef CONFIG_CACHE_L2X0
+	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) {
+		/* 7x27 has 256KB L2 cache:
+			64Kb/Way and 4-Way Associativity;
+			R/W latency: 3 cycles;
+			evmon/parity/share disabled. */
+		l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000);
+	}
+#endif
+}
+
+MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= msm7x2x_map_io,
+	.init_irq	= msm7x2x_init_irq,
+	.init_machine	= msm7x2x_init,
+	.timer		= &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= msm7x2x_map_io,
+	.init_irq	= msm7x2x_init_irq,
+	.init_machine	= msm7x2x_init,
+	.timer		= &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= msm7x2x_map_io,
+	.init_irq	= msm7x2x_init_irq,
+	.init_machine	= msm7x2x_init,
+	.timer		= &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= msm7x2x_map_io,
+	.init_irq	= msm7x2x_init_irq,
+	.init_machine	= msm7x2x_init,
+	.timer		= &msm_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-msm7x30.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-msm7x30.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-msm7x30.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-msm7x30.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,119 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+
+#include <mach/gpio.h>
+#include <mach/board.h>
+#include <mach/memory.h>
+#include <mach/msm_iomap.h>
+#include <mach/dma.h>
+
+#include <mach/vreg.h>
+#include "devices.h"
+#include "proc_comm.h"
+
+extern struct sys_timer msm_timer;
+
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+static struct msm_gpio uart2_config_data[] = {
+	{ GPIO_CFG(49, 2, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_RFR"},
+	{ GPIO_CFG(50, 2, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_CTS"},
+	{ GPIO_CFG(51, 2, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
+	{ GPIO_CFG(52, 2, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
+};
+
+static void msm7x30_init_uart2(void)
+{
+	msm_gpios_request_enable(uart2_config_data,
+			ARRAY_SIZE(uart2_config_data));
+
+}
+#endif
+
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
+        &msm_device_uart2,
+#endif
+
+};
+
+static void __init msm7x30_init_irq(void)
+{
+	msm_init_irq();
+}
+
+static void __init msm7x30_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+	msm7x30_init_uart2();
+#endif
+
+}
+
+static void __init msm7x30_map_io(void)
+{
+	msm_map_msm7x30_io();
+	msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
+}
+
+MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = msm7x30_map_io,
+	.init_irq = msm7x30_init_irq,
+	.init_machine = msm7x30_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = msm7x30_map_io,
+	.init_irq = msm7x30_init_irq,
+	.init_machine = msm7x30_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = msm7x30_map_io,
+	.init_irq = msm7x30_init_irq,
+	.init_machine = msm7x30_init,
+	.timer = &msm_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-qsd8x50.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-qsd8x50.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-qsd8x50.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-qsd8x50.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,93 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/irqs.h>
+#include <mach/sirc.h>
+#include <mach/gpio.h>
+
+#include "devices.h"
+
+extern struct sys_timer msm_timer;
+
+static struct msm_gpio uart3_config_data[] = {
+	{ GPIO_CFG(86, 1, GPIO_INPUT,   GPIO_PULL_DOWN, GPIO_2MA), "UART2_Rx"},
+	{ GPIO_CFG(87, 1, GPIO_OUTPUT,  GPIO_PULL_DOWN, GPIO_2MA), "UART2_Tx"},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_uart3,
+};
+
+static void msm8x50_init_uart3(void)
+{
+	msm_gpios_request_enable(uart3_config_data,
+				ARRAY_SIZE(uart3_config_data));
+}
+
+static void __init qsd8x50_map_io(void)
+{
+	msm_map_qsd8x50_io();
+	msm_clock_init(msm_clocks_8x50, msm_num_clocks_8x50);
+}
+
+static void __init qsd8x50_init_irq(void)
+{
+	msm_init_irq();
+	msm_init_sirc();
+}
+
+static void __init qsd8x50_init(void)
+{
+	msm8x50_init_uart3();
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = qsd8x50_map_io,
+	.init_irq = qsd8x50_init_irq,
+	.init_machine = qsd8x50_init,
+	.timer = &msm_timer,
+MACHINE_END
+
+MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io  = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params = PHYS_OFFSET + 0x100,
+	.map_io = qsd8x50_map_io,
+	.init_irq = qsd8x50_init_irq,
+	.init_machine = qsd8x50_init,
+	.timer = &msm_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-sapphire.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-sapphire.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-sapphire.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-sapphire.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,118 @@
+/* linux/arch/arm/mach-msm/board-sapphire.c
+ * Copyright (C) 2007-2009 HTC Corporation.
+ * Author: Thomas Tsai <thomas_tsai@htc.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+
+#include <linux/delay.h>
+
+#include <asm/gpio.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <asm/system.h>
+#include <mach/system.h>
+#include <mach/vreg.h>
+#include <mach/board.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/setup.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include "gpio_chip.h"
+#include "board-sapphire.h"
+#include "proc_comm.h"
+#include "devices.h"
+
+void msm_init_irq(void);
+void msm_init_gpio(void);
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_smd,
+	&msm_device_dmov,
+	&msm_device_nand,
+	&msm_device_uart1,
+	&msm_device_uart3,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init sapphire_init_irq(void)
+{
+	msm_init_irq();
+}
+
+static void __init sapphire_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static struct map_desc sapphire_io_desc[] __initdata = {
+	{
+		.virtual = SAPPHIRE_CPLD_BASE,
+		.pfn     = __phys_to_pfn(SAPPHIRE_CPLD_START),
+		.length  = SAPPHIRE_CPLD_SIZE,
+		.type    = MT_DEVICE_NONSHARED
+	}
+};
+
+static void __init sapphire_fixup(struct machine_desc *desc, struct tag *tags,
+				  char **cmdline, struct meminfo *mi)
+{
+	int smi_sz = parse_tag_smi((const struct tag *)tags);
+
+	mi->nr_banks = 1;
+	mi->bank[0].start = PHYS_OFFSET;
+	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
+	if (smi_sz == 32) {
+		mi->bank[0].size = (84*1024*1024);
+	} else if (smi_sz == 64) {
+		mi->bank[0].size = (101*1024*1024);
+	} else {
+		/* Give a default value when not get smi size */
+		smi_sz = 64;
+		mi->bank[0].size = (101*1024*1024);
+	}
+}
+
+static void __init sapphire_map_io(void)
+{
+	msm_map_common_io();
+	iotable_init(sapphire_io_desc, ARRAY_SIZE(sapphire_io_desc));
+	msm_clock_init();
+}
+
+MACHINE_START(SAPPHIRE, "sapphire")
+/* Maintainer: Brian Swetland <swetland@google.com> */
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io        = MSM_DEBUG_UART_PHYS,
+	.io_pg_offst    = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.fixup          = sapphire_fixup,
+	.map_io         = sapphire_map_io,
+	.init_irq       = sapphire_init_irq,
+	.init_machine   = sapphire_init,
+	.timer          = &msm_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-trout.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-trout.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-trout.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-trout.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,95 @@
+/* linux/arch/arm/mach-msm/board-trout.c
+ *
+ * Copyright (C) 2009 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/hardware.h>
+#include <mach/msm_iomap.h>
+
+#include "devices.h"
+#include "board-trout.h"
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_uart3,
+	&msm_device_smd,
+	&msm_device_nand,
+	&msm_device_hsusb,
+	&msm_device_i2c,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init trout_init_irq(void)
+{
+	msm_init_irq();
+}
+
+static void __init trout_fixup(struct machine_desc *desc, struct tag *tags,
+				char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks = 1;
+	mi->bank[0].start = PHYS_OFFSET;
+	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
+	mi->bank[0].size = (101*1024*1024);
+}
+
+static void __init trout_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static struct map_desc trout_io_desc[] __initdata = {
+	{
+		.virtual = TROUT_CPLD_BASE,
+		.pfn     = __phys_to_pfn(TROUT_CPLD_START),
+		.length  = TROUT_CPLD_SIZE,
+		.type    = MT_DEVICE_NONSHARED
+	}
+};
+
+static void __init trout_map_io(void)
+{
+	msm_map_common_io();
+	iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
+
+#ifdef CONFIG_MSM_DEBUG_UART3
+	/* route UART3 to the "H2W" extended usb connector */
+	writeb(0x80, TROUT_CPLD_BASE + 0x00);
+#endif
+
+	msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a);
+}
+
+MACHINE_START(TROUT, "HTC Dream")
+#ifdef CONFIG_MSM_DEBUG_UART
+	.phys_io	= MSM_DEBUG_UART_PHYS,
+	.io_pg_offst	= ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+#endif
+	.boot_params	= 0x10000100,
+	.fixup		= trout_fixup,
+	.map_io		= trout_map_io,
+	.init_irq	= trout_init_irq,
+	.init_machine	= trout_init,
+	.timer		= &msm_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-trout.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-trout.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/board-trout.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/board-trout.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,5 @@
+
+#define TROUT_CPLD_BASE   0xE8100000
+#define TROUT_CPLD_START  0x98000000
+#define TROUT_CPLD_SIZE   SZ_4K
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/clock-7x01a.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/clock-7x01a.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/clock-7x01a.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/clock-7x01a.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,126 +0,0 @@
-/* arch/arm/mach-msm/clock-7x01a.c
- *
- * Clock tables for MSM7X01A
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include "clock.h"
-#include "devices.h"
-
-/* clock IDs used by the modem processor */
-
-#define ACPU_CLK	0   /* Applications processor clock */
-#define ADM_CLK		1   /* Applications data mover clock */
-#define ADSP_CLK	2   /* ADSP clock */
-#define EBI1_CLK	3   /* External bus interface 1 clock */
-#define EBI2_CLK	4   /* External bus interface 2 clock */
-#define ECODEC_CLK	5   /* External CODEC clock */
-#define EMDH_CLK	6   /* External MDDI host clock */
-#define GP_CLK		7   /* General purpose clock */
-#define GRP_CLK		8   /* Graphics clock */
-#define I2C_CLK		9   /* I2C clock */
-#define ICODEC_RX_CLK	10  /* Internal CODEX RX clock */
-#define ICODEC_TX_CLK	11  /* Internal CODEX TX clock */
-#define IMEM_CLK	12  /* Internal graphics memory clock */
-#define MDC_CLK		13  /* MDDI client clock */
-#define MDP_CLK		14  /* Mobile display processor clock */
-#define PBUS_CLK	15  /* Peripheral bus clock */
-#define PCM_CLK		16  /* PCM clock */
-#define PMDH_CLK	17  /* Primary MDDI host clock */
-#define SDAC_CLK	18  /* Stereo DAC clock */
-#define SDC1_CLK	19  /* Secure Digital Card clocks */
-#define SDC1_PCLK	20
-#define SDC2_CLK	21
-#define SDC2_PCLK	22
-#define SDC3_CLK	23
-#define SDC3_PCLK	24
-#define SDC4_CLK	25
-#define SDC4_PCLK	26
-#define TSIF_CLK	27  /* Transport Stream Interface clocks */
-#define TSIF_REF_CLK	28
-#define TV_DAC_CLK	29  /* TV clocks */
-#define TV_ENC_CLK	30
-#define UART1_CLK	31  /* UART clocks */
-#define UART2_CLK	32
-#define UART3_CLK	33
-#define UART1DM_CLK	34
-#define UART2DM_CLK	35
-#define USB_HS_CLK	36  /* High speed USB core clock */
-#define USB_HS_PCLK	37  /* High speed USB pbus clock */
-#define USB_OTG_CLK	38  /* Full speed USB clock */
-#define VDC_CLK		39  /* Video controller clock */
-#define VFE_CLK		40  /* Camera / Video Front End clock */
-#define VFE_MDC_CLK	41  /* VFE MDDI client clock */
-
-#define NR_CLKS		42
-
-#define CLOCK(clk_name, clk_id, clk_dev, clk_flags) {	\
-	.name = clk_name, \
-	.id = clk_id, \
-	.flags = clk_flags, \
-	.dev = clk_dev, \
-	}
-
-#define OFF CLKFLAG_AUTO_OFF
-#define MINMAX CLKFLAG_USE_MIN_MAX_TO_SET
-
-struct clk msm_clocks[] = {
-	CLOCK("adm_clk",	ADM_CLK,	NULL, 0),
-	CLOCK("adsp_clk",	ADSP_CLK,	NULL, 0),
-	CLOCK("ebi1_clk",	EBI1_CLK,	NULL, 0),
-	CLOCK("ebi2_clk",	EBI2_CLK,	NULL, 0),
-	CLOCK("ecodec_clk",	ECODEC_CLK,	NULL, 0),
-	CLOCK("emdh_clk",	EMDH_CLK,	NULL, OFF),
-	CLOCK("gp_clk",		GP_CLK,		NULL, 0),
-	CLOCK("grp_clk",	GRP_CLK,	NULL, OFF),
-	CLOCK("i2c_clk",	I2C_CLK,	&msm_device_i2c.dev, 0),
-	CLOCK("icodec_rx_clk",	ICODEC_RX_CLK,	NULL, 0),
-	CLOCK("icodec_tx_clk",	ICODEC_TX_CLK,	NULL, 0),
-	CLOCK("imem_clk",	IMEM_CLK,	NULL, OFF),
-	CLOCK("mdc_clk",	MDC_CLK,	NULL, 0),
-	CLOCK("mdp_clk",	MDP_CLK,	NULL, OFF),
-	CLOCK("pbus_clk",	PBUS_CLK,	NULL, 0),
-	CLOCK("pcm_clk",	PCM_CLK,	NULL, 0),
-	CLOCK("pmdh_clk",	PMDH_CLK,	NULL, OFF | MINMAX),
-	CLOCK("sdac_clk",	SDAC_CLK,	NULL, OFF),
-	CLOCK("sdc_clk",	SDC1_CLK,	&msm_device_sdc1.dev, OFF),
-	CLOCK("sdc_pclk",	SDC1_PCLK,	&msm_device_sdc1.dev, OFF),
-	CLOCK("sdc_clk",	SDC2_CLK,	&msm_device_sdc2.dev, OFF),
-	CLOCK("sdc_pclk",	SDC2_PCLK,	&msm_device_sdc2.dev, OFF),
-	CLOCK("sdc_clk",	SDC3_CLK,	&msm_device_sdc3.dev, OFF),
-	CLOCK("sdc_pclk",	SDC3_PCLK,	&msm_device_sdc3.dev, OFF),
-	CLOCK("sdc_clk",	SDC4_CLK,	&msm_device_sdc4.dev, OFF),
-	CLOCK("sdc_pclk",	SDC4_PCLK,	&msm_device_sdc4.dev, OFF),
-	CLOCK("tsif_clk",	TSIF_CLK,	NULL, 0),
-	CLOCK("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
-	CLOCK("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
-	CLOCK("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
-	CLOCK("uart_clk",	UART1_CLK,	&msm_device_uart1.dev, OFF),
-	CLOCK("uart_clk",	UART2_CLK,	&msm_device_uart2.dev, 0),
-	CLOCK("uart_clk",	UART3_CLK,	&msm_device_uart3.dev, OFF),
-	CLOCK("uart1dm_clk",	UART1DM_CLK,	NULL, OFF),
-	CLOCK("uart2dm_clk",	UART2DM_CLK,	NULL, 0),
-	CLOCK("usb_hs_clk",	USB_HS_CLK,	&msm_device_hsusb.dev, OFF),
-	CLOCK("usb_hs_pclk",	USB_HS_PCLK,	&msm_device_hsusb.dev, OFF),
-	CLOCK("usb_otg_clk",	USB_OTG_CLK,	NULL, 0),
-	CLOCK("vdc_clk",	VDC_CLK,	NULL, OFF | MINMAX),
-	CLOCK("vfe_clk",	VFE_CLK,	NULL, OFF),
-	CLOCK("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
-};
-
-unsigned msm_num_clocks = ARRAY_SIZE(msm_clocks);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/clock-7x30.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/clock-7x30.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/clock-7x30.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/clock-7x30.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,168 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_CLOCK_7X30_H
+#define __ARCH_ARM_MACH_MSM_CLOCK_7X30_H
+
+enum {
+	L_7X30_NONE_CLK = -1,
+	L_7X30_ADM_CLK,
+	L_7X30_I2C_CLK,
+	L_7X30_I2C_2_CLK,
+	L_7X30_QUP_I2C_CLK,
+	L_7X30_UART1DM_CLK,
+	L_7X30_UART1DM_P_CLK,
+	L_7X30_UART2DM_CLK,
+	L_7X30_UART2DM_P_CLK,
+	L_7X30_EMDH_CLK,
+	L_7X30_EMDH_P_CLK,
+	L_7X30_PMDH_CLK,
+	L_7X30_PMDH_P_CLK,
+	L_7X30_GRP_2D_CLK,
+	L_7X30_GRP_2D_P_CLK,
+	L_7X30_GRP_3D_SRC_CLK,
+	L_7X30_GRP_3D_CLK,
+	L_7X30_GRP_3D_P_CLK,
+	L_7X30_IMEM_CLK,
+	L_7X30_SDC1_CLK,
+	L_7X30_SDC1_P_CLK,
+	L_7X30_SDC2_CLK,
+	L_7X30_SDC2_P_CLK,
+	L_7X30_SDC3_CLK,
+	L_7X30_SDC3_P_CLK,
+	L_7X30_SDC4_CLK,
+	L_7X30_SDC4_P_CLK,
+	L_7X30_MDP_CLK,
+	L_7X30_MDP_P_CLK,
+	L_7X30_MDP_LCDC_PCLK_CLK,
+	L_7X30_MDP_LCDC_PAD_PCLK_CLK,
+	L_7X30_MDP_VSYNC_CLK,
+	L_7X30_MI2S_CODEC_RX_M_CLK,
+	L_7X30_MI2S_CODEC_RX_S_CLK,
+	L_7X30_MI2S_CODEC_TX_M_CLK,
+	L_7X30_MI2S_CODEC_TX_S_CLK,
+	L_7X30_MI2S_M_CLK,
+	L_7X30_MI2S_S_CLK,
+	L_7X30_LPA_CODEC_CLK,
+	L_7X30_LPA_CORE_CLK,
+	L_7X30_LPA_P_CLK,
+	L_7X30_MIDI_CLK,
+	L_7X30_MDC_CLK,
+	L_7X30_ROTATOR_IMEM_CLK,
+	L_7X30_ROTATOR_P_CLK,
+	L_7X30_SDAC_M_CLK,
+	L_7X30_SDAC_CLK,
+	L_7X30_UART1_CLK,
+	L_7X30_UART2_CLK,
+	L_7X30_UART3_CLK,
+	L_7X30_TV_CLK,
+	L_7X30_TV_DAC_CLK,
+	L_7X30_TV_ENC_CLK,
+	L_7X30_HDMI_CLK,
+	L_7X30_TSIF_REF_CLK,
+	L_7X30_TSIF_P_CLK,
+	L_7X30_USB_HS_SRC_CLK,
+	L_7X30_USB_HS_CLK,
+	L_7X30_USB_HS_CORE_CLK,
+	L_7X30_USB_HS_P_CLK,
+	L_7X30_USB_HS2_CLK,
+	L_7X30_USB_HS2_CORE_CLK,
+	L_7X30_USB_HS2_P_CLK,
+	L_7X30_USB_HS3_CLK,
+	L_7X30_USB_HS3_CORE_CLK,
+	L_7X30_USB_HS3_P_CLK,
+	L_7X30_VFE_CLK,
+	L_7X30_VFE_P_CLK,
+	L_7X30_VFE_MDC_CLK,
+	L_7X30_VFE_CAMIF_CLK,
+	L_7X30_CAMIF_PAD_P_CLK,
+	L_7X30_CAM_M_CLK,
+	L_7X30_JPEG_CLK,
+	L_7X30_JPEG_P_CLK,
+	L_7X30_VPE_CLK,
+	L_7X30_MFC_CLK,
+	L_7X30_MFC_DIV2_CLK,
+	L_7X30_MFC_P_CLK,
+	L_7X30_SPI_CLK,
+	L_7X30_SPI_P_CLK,
+	L_7X30_CSI0_CLK,
+	L_7X30_CSI0_VFE_CLK,
+	L_7X30_CSI0_P_CLK,
+	L_7X30_CSI1_CLK,
+	L_7X30_CSI1_VFE_CLK,
+	L_7X30_CSI1_P_CLK,
+	L_7X30_GLBL_ROOT_CLK,
+
+	L_7X30_AXI_LI_VG_CLK,
+	L_7X30_AXI_LI_GRP_CLK,
+	L_7X30_AXI_LI_JPEG_CLK,
+	L_7X30_AXI_GRP_2D_CLK,
+	L_7X30_AXI_MFC_CLK,
+	L_7X30_AXI_VPE_CLK,
+	L_7X30_AXI_LI_VFE_CLK,
+	L_7X30_AXI_LI_APPS_CLK,
+	L_7X30_AXI_MDP_CLK,
+	L_7X30_AXI_IMEM_CLK,
+	L_7X30_AXI_LI_ADSP_A_CLK,
+	L_7X30_AXI_ROTATOR_CLK,
+
+	L_7X30_NR_CLKS
+};
+
+struct clk_ops;
+extern struct clk_ops clk_ops_7x30;
+
+struct clk_ops *clk_7x30_is_local(uint32_t id);
+int clk_7x30_init(void);
+
+void pll_enable(uint32_t pll);
+void pll_disable(uint32_t pll);
+
+extern int internal_pwr_rail_ctl_auto(unsigned rail_id, bool enable);
+
+#define CLK_7X30(clk_name, clk_id, clk_dev, clk_flags) {	\
+	.name = clk_name, \
+	.id = L_7X30_##clk_id, \
+	.remote_id = P_##clk_id, \
+	.flags = clk_flags, \
+	.dev = clk_dev, \
+	.dbg_name = #clk_id, \
+	}
+
+#define CLK_7X30S(clk_name, l_id, r_id, clk_dev, clk_flags) {	\
+	.name = clk_name, \
+	.id = L_7X30_##l_id, \
+	.remote_id = P_##r_id, \
+	.flags = clk_flags, \
+	.dev = clk_dev, \
+	.dbg_name = #l_id, \
+	}
+
+#endif
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,7 +1,7 @@
 /* arch/arm/mach-msm/clock.c
  *
  * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
+ * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -22,68 +22,27 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/ctype.h>
+#include <linux/pm_qos_params.h>
+#include <mach/clk.h>
 
 #include "clock.h"
 #include "proc_comm.h"
+#include "clock-7x30.h"
 
 static DEFINE_MUTEX(clocks_mutex);
 static DEFINE_SPINLOCK(clocks_lock);
 static LIST_HEAD(clocks);
+struct clk *msm_clocks;
+unsigned msm_num_clocks;
 
 /*
- * glue for the proc_comm interface
+ * Bitmap of enabled clocks, excluding ACPU which is always
+ * enabled
  */
-static inline int pc_clk_enable(unsigned id)
-{
-	return msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
-}
-
-static inline void pc_clk_disable(unsigned id)
-{
-	msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
-}
-
-static inline int pc_clk_set_rate(unsigned id, unsigned rate)
-{
-	return msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
-}
-
-static inline int pc_clk_set_min_rate(unsigned id, unsigned rate)
-{
-	return msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
-}
-
-static inline int pc_clk_set_max_rate(unsigned id, unsigned rate)
-{
-	return msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
-}
-
-static inline int pc_clk_set_flags(unsigned id, unsigned flags)
-{
-	return msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
-}
-
-static inline unsigned pc_clk_get_rate(unsigned id)
-{
-	if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
-		return 0;
-	else
-		return id;
-}
-
-static inline unsigned pc_clk_is_enabled(unsigned id)
-{
-	if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
-		return 0;
-	else
-		return id;
-}
-
-static inline int pc_pll_request(unsigned id, unsigned on)
-{
-	on = !!on;
-	return msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);
-}
+static DECLARE_BITMAP(clock_map_enabled, NR_CLKS);
+static DEFINE_SPINLOCK(clock_map_lock);
 
 /*
  * Standard clock functions defined in include/linux/clk.h
@@ -119,8 +78,12 @@
 	unsigned long flags;
 	spin_lock_irqsave(&clocks_lock, flags);
 	clk->count++;
-	if (clk->count == 1)
-		pc_clk_enable(clk->id);
+	if (clk->count == 1) {
+		clk->ops->enable(clk->id);
+		spin_lock(&clock_map_lock);
+		clock_map_enabled[BIT_WORD(clk->id)] |= BIT_MASK(clk->id);
+		spin_unlock(&clock_map_lock);
+	}
 	spin_unlock_irqrestore(&clocks_lock, flags);
 	return 0;
 }
@@ -132,31 +95,54 @@
 	spin_lock_irqsave(&clocks_lock, flags);
 	BUG_ON(clk->count == 0);
 	clk->count--;
-	if (clk->count == 0)
-		pc_clk_disable(clk->id);
+	if (clk->count == 0) {
+		clk->ops->disable(clk->id);
+		spin_lock(&clock_map_lock);
+		clock_map_enabled[BIT_WORD(clk->id)] &= ~BIT_MASK(clk->id);
+		spin_unlock(&clock_map_lock);
+	}
 	spin_unlock_irqrestore(&clocks_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
+int clk_reset(struct clk *clk, enum clk_reset_action action)
+{
+	if (!clk->ops->reset)
+		clk->ops->reset = &pc_clk_reset;
+	return clk->ops->reset(clk->remote_id, action);
+}
+EXPORT_SYMBOL(clk_reset);
+
 unsigned long clk_get_rate(struct clk *clk)
 {
-	return pc_clk_get_rate(clk->id);
+	return clk->ops->get_rate(clk->id);
 }
 EXPORT_SYMBOL(clk_get_rate);
 
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
-	int ret;
-	if (clk->flags & CLKFLAG_USE_MIN_MAX_TO_SET) {
-		ret = pc_clk_set_max_rate(clk->id, rate);
-		if (ret)
-			return ret;
-		return pc_clk_set_min_rate(clk->id, rate);
-	}
-	return pc_clk_set_rate(clk->id, rate);
+	return clk->ops->set_rate(clk->id, rate);
 }
 EXPORT_SYMBOL(clk_set_rate);
 
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->ops->round_rate(clk->id, rate);
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_min_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->ops->set_min_rate(clk->id, rate);
+}
+EXPORT_SYMBOL(clk_set_min_rate);
+
+int clk_set_max_rate(struct clk *clk, unsigned long rate)
+{
+	return clk->ops->set_max_rate(clk->id, rate);
+}
+EXPORT_SYMBOL(clk_set_max_rate);
+
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
 	return -ENOSYS;
@@ -173,22 +159,153 @@
 {
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
-	return pc_clk_set_flags(clk->id, flags);
+	return clk->ops->set_flags(clk->id, flags);
 }
 EXPORT_SYMBOL(clk_set_flags);
 
+/* EBI1 is the only shared clock that several clients want to vote on as of
+ * this commit. If this changes in the future, then it might be better to
+ * make clk_min_rate handle the voting or make ebi1_clk_set_min_rate more
+ * generic to support different clocks.
+ */
+static struct clk *ebi1_clk;
 
-void __init msm_clock_init(void)
+static void __init set_clock_ops(struct clk *clk)
+{
+	if (!clk->ops) {
+		clk->ops = &clk_ops_pcom;
+		clk->id = clk->remote_id;
+	}
+}
+
+void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks)
 {
 	unsigned n;
 
 	spin_lock_init(&clocks_lock);
 	mutex_lock(&clocks_mutex);
-	for (n = 0; n < msm_num_clocks; n++)
+	msm_clocks = clock_tbl;
+	msm_num_clocks = num_clocks;
+	for (n = 0; n < msm_num_clocks; n++) {
+		set_clock_ops(&msm_clocks[n]);
 		list_add_tail(&msm_clocks[n].list, &clocks);
+	}
 	mutex_unlock(&clocks_mutex);
+
+	ebi1_clk = clk_get(NULL, "ebi1_clk");
+	BUG_ON(ebi1_clk == NULL);
+
+}
+
+#if defined(CONFIG_DEBUG_FS)
+static struct clk *msm_clock_get_nth(unsigned index)
+{
+	if (index < msm_num_clocks)
+		return msm_clocks + index;
+	else
+		return 0;
+}
+
+static int clock_debug_rate_set(void *data, u64 val)
+{
+	struct clk *clock = data;
+	int ret;
+
+	/* Only increases to max rate will succeed, but that's actually good
+	 * for debugging purposes. So we don't check for error. */
+	if (clock->flags & CLK_MAX)
+		clk_set_max_rate(clock, val);
+	if (clock->flags & CLK_MIN)
+		ret = clk_set_min_rate(clock, val);
+	else
+		ret = clk_set_rate(clock, val);
+	if (ret != 0)
+		printk(KERN_ERR "clk_set%s_rate failed (%d)\n",
+			(clock->flags & CLK_MIN) ? "_min" : "", ret);
+	return ret;
+}
+
+static int clock_debug_rate_get(void *data, u64 *val)
+{
+	struct clk *clock = data;
+	*val = clk_get_rate(clock);
+	return 0;
+}
+
+static int clock_debug_enable_set(void *data, u64 val)
+{
+	struct clk *clock = data;
+	int rc = 0;
+
+	if (val)
+		rc = clock->ops->enable(clock->id);
+	else
+		clock->ops->disable(clock->id);
+
+	return rc;
 }
 
+static int clock_debug_enable_get(void *data, u64 *val)
+{
+	struct clk *clock = data;
+
+	*val = clock->ops->is_enabled(clock->id);
+
+	return 0;
+}
+
+static int clock_debug_local_get(void *data, u64 *val)
+{
+	struct clk *clock = data;
+
+	*val = clock->ops != &clk_ops_pcom;
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(clock_rate_fops, clock_debug_rate_get,
+			clock_debug_rate_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(clock_enable_fops, clock_debug_enable_get,
+			clock_debug_enable_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(clock_local_fops, clock_debug_local_get,
+			NULL, "%llu\n");
+
+static int __init clock_debug_init(void)
+{
+	struct dentry *dent_rate, *dent_enable, *dent_local;
+	struct clk *clock;
+	unsigned n = 0;
+	char temp[50], *ptr;
+
+	dent_rate = debugfs_create_dir("clk_rate", 0);
+	if (IS_ERR(dent_rate))
+		return PTR_ERR(dent_rate);
+
+	dent_enable = debugfs_create_dir("clk_enable", 0);
+	if (IS_ERR(dent_enable))
+		return PTR_ERR(dent_enable);
+
+	dent_local = debugfs_create_dir("clk_local", NULL);
+	if (IS_ERR(dent_local))
+		return PTR_ERR(dent_local);
+
+	while ((clock = msm_clock_get_nth(n++)) != 0) {
+		strncpy(temp, clock->dbg_name, ARRAY_SIZE(temp)-1);
+		for (ptr = temp; *ptr; ptr++)
+			*ptr = tolower(*ptr);
+		debugfs_create_file(temp, 0644, dent_rate,
+				    clock, &clock_rate_fops);
+		debugfs_create_file(temp, 0644, dent_enable,
+				    clock, &clock_enable_fops);
+		debugfs_create_file(temp, S_IRUGO, dent_local,
+				    clock, &clock_local_fops);
+	}
+	return 0;
+}
+
+device_initcall(clock_debug_init);
+#endif
+
 /* The bootloader and/or AMSS may have left various clocks enabled.
  * Disable any clocks that belong to us (CLKFLAG_AUTO_OFF) but have
  * not been explicitly enabled by a clk_enable() call.
@@ -205,7 +322,7 @@
 			spin_lock_irqsave(&clocks_lock, flags);
 			if (!clk->count) {
 				count++;
-				pc_clk_disable(clk->id);
+				clk->ops->auto_off(clk->id);
 			}
 			spin_unlock_irqrestore(&clocks_lock, flags);
 		}
@@ -216,3 +333,4 @@
 }
 
 late_initcall(clock_late_init);
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/clock.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,7 +1,7 @@
 /* arch/arm/mach-msm/clock.h
  *
  * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2007 QUALCOMM Incorporated
+ * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -18,6 +18,10 @@
 #define __ARCH_ARM_MACH_MSM_CLOCK_H
 
 #include <linux/list.h>
+#include <mach/clk.h>
+
+#include "clock-pcom.h"
+#include "clock-7x30.h"
 
 #define CLKFLAG_INVERT			0x00000001
 #define CLKFLAG_NOINVERT		0x00000002
@@ -25,14 +29,32 @@
 #define CLKFLAG_NORESET			0x00000008
 
 #define CLK_FIRST_AVAILABLE_FLAG	0x00000100
-#define CLKFLAG_USE_MIN_MAX_TO_SET	0x00000200
-#define CLKFLAG_AUTO_OFF		0x00000400
+#define CLKFLAG_AUTO_OFF		0x00000200
+#define CLKFLAG_MIN			0x00000400
+#define CLKFLAG_MAX			0x00000800
+
+struct clk_ops {
+	int (*enable)(unsigned id);
+	void (*disable)(unsigned id);
+	void (*auto_off)(unsigned id);
+	int (*reset)(unsigned id, enum clk_reset_action action);
+	int (*set_rate)(unsigned id, unsigned rate);
+	int (*set_min_rate)(unsigned id, unsigned rate);
+	int (*set_max_rate)(unsigned id, unsigned rate);
+	int (*set_flags)(unsigned id, unsigned flags);
+	unsigned (*get_rate)(unsigned id);
+	unsigned (*is_enabled)(unsigned id);
+	long (*round_rate)(unsigned id, unsigned rate);
+};
 
 struct clk {
 	uint32_t id;
+	uint32_t remote_id;
 	uint32_t count;
 	uint32_t flags;
 	const char *name;
+	struct clk_ops *ops;
+	const char *dbg_name;
 	struct list_head list;
 	struct device *dev;
 };
@@ -41,8 +63,47 @@
 #define A11S_CLK_SEL_ADDR		(MSM_CSR_BASE + 0x104)
 #define A11S_VDD_SVS_PLEVEL_ADDR	(MSM_CSR_BASE + 0x124)
 
-extern struct clk msm_clocks[];
-extern unsigned msm_num_clocks;
+#ifdef CONFIG_DEBUG_FS
+#define CLOCK_DBG_NAME(x) .dbg_name = x,
+#else
+#define CLOCK_DBG_NAME(x)
+#endif
+
+#define CLOCK(clk_name, clk_id, clk_dev, clk_flags) {	\
+	.name = clk_name, \
+	.id = clk_id, \
+	.flags = clk_flags, \
+	.dev = clk_dev, \
+	 CLOCK_DBG_NAME(#clk_id) \
+	}
+
+#define OFF CLKFLAG_AUTO_OFF
+#define CLK_MIN CLKFLAG_MIN
+#define CLK_MAX CLKFLAG_MAX
+#define CLK_MINMAX (CLK_MIN | CLK_MAX)
+#define NR_CLKS	P_NR_CLKS
+
+enum {
+	PLL_0 = 0,
+	PLL_1,
+	PLL_2,
+	PLL_3,
+	PLL_4,
+	PLL_5,
+	PLL_6,
+	NUM_PLL
+};
+
+enum clkvote_client {
+	CLKVOTE_ACPUCLK = 0,
+	CLKVOTE_PMQOS,
+	CLKVOTE_MAX,
+};
+
+int msm_clock_require_tcxo(unsigned long *reason, int nbits);
+int msm_clock_get_name(uint32_t id, char *name, uint32_t size);
+int ebi1_clk_set_min_rate(enum clkvote_client client, unsigned long rate);
+unsigned long clk_get_max_axi_khz(void);
 
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/clock-pcom.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/clock-pcom.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/clock-pcom.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/clock-pcom.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/ctype.h>
+#include <linux/stddef.h>
+#include <mach/clk.h>
+
+#include "proc_comm.h"
+#include "clock.h"
+
+/*
+ * glue for the proc_comm interface
+ */
+int pc_clk_enable(unsigned id)
+{
+	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL);
+	if (rc < 0)
+		return rc;
+	else
+		return (int)id < 0 ? -EINVAL : 0;
+}
+
+void pc_clk_disable(unsigned id)
+{
+	msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL);
+}
+
+int pc_clk_reset(unsigned id, enum clk_reset_action action)
+{
+	int rc;
+
+	if (action == CLK_RESET_ASSERT)
+		rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_ASSERT, &id, NULL);
+	else
+		rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_DEASSERT, &id, NULL);
+
+	if (rc < 0)
+		return rc;
+	else
+		return (int)id < 0 ? -EINVAL : 0;
+}
+
+int pc_clk_set_rate(unsigned id, unsigned rate)
+{
+	/* The rate _might_ be rounded off to the nearest KHz value by the
+	 * remote function. So a return value of 0 doesn't necessarily mean
+	 * that the exact rate was set successfully.
+	 */
+	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate);
+	if (rc < 0)
+		return rc;
+	else
+		return (int)id < 0 ? -EINVAL : 0;
+}
+
+int pc_clk_set_min_rate(unsigned id, unsigned rate)
+{
+	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate);
+	if (rc < 0)
+		return rc;
+	else
+		return (int)id < 0 ? -EINVAL : 0;
+}
+
+int pc_clk_set_max_rate(unsigned id, unsigned rate)
+{
+	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate);
+	if (rc < 0)
+		return rc;
+	else
+		return (int)id < 0 ? -EINVAL : 0;
+}
+
+int pc_clk_set_flags(unsigned id, unsigned flags)
+{
+	int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags);
+	if (rc < 0)
+		return rc;
+	else
+		return (int)id < 0 ? -EINVAL : 0;
+}
+
+unsigned pc_clk_get_rate(unsigned id)
+{
+	if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL))
+		return 0;
+	else
+		return id;
+}
+
+unsigned pc_clk_is_enabled(unsigned id)
+{
+	if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL))
+		return 0;
+	else
+		return id;
+}
+
+long pc_clk_round_rate(unsigned id, unsigned rate)
+{
+
+	/* Not really supported; pc_clk_set_rate() does rounding on it's own. */
+	return rate;
+}
+
+struct clk_ops clk_ops_pcom = {
+	.enable = pc_clk_enable,
+	.disable = pc_clk_disable,
+	.auto_off = pc_clk_disable,
+	.reset = pc_clk_reset,
+	.set_rate = pc_clk_set_rate,
+	.set_min_rate = pc_clk_set_min_rate,
+	.set_max_rate = pc_clk_set_max_rate,
+	.set_flags = pc_clk_set_flags,
+	.get_rate = pc_clk_get_rate,
+	.is_enabled = pc_clk_is_enabled,
+	.round_rate = pc_clk_round_rate,
+};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/clock-pcom.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/clock-pcom.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/clock-pcom.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/clock-pcom.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,153 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
+#define __ARCH_ARM_MACH_MSM_CLOCK_PCOM_H
+
+/* clock IDs used by the modem processor */
+
+#define P_ACPU_CLK	0   /* Applications processor clock */
+#define P_ADM_CLK	1   /* Applications data mover clock */
+#define P_ADSP_CLK	2   /* ADSP clock */
+#define P_EBI1_CLK	3   /* External bus interface 1 clock */
+#define P_EBI2_CLK	4   /* External bus interface 2 clock */
+#define P_ECODEC_CLK	5   /* External CODEC clock */
+#define P_EMDH_CLK	6   /* External MDDI host clock */
+#define P_GP_CLK	7   /* General purpose clock */
+#define P_GRP_3D_CLK	8   /* Graphics clock */
+#define P_I2C_CLK	9   /* I2C clock */
+#define P_ICODEC_RX_CLK	10  /* Internal CODEX RX clock */
+#define P_ICODEC_TX_CLK	11  /* Internal CODEX TX clock */
+#define P_IMEM_CLK	12  /* Internal graphics memory clock */
+#define P_MDC_CLK	13  /* MDDI client clock */
+#define P_MDP_CLK	14  /* Mobile display processor clock */
+#define P_PBUS_CLK	15  /* Peripheral bus clock */
+#define P_PCM_CLK	16  /* PCM clock */
+#define P_PMDH_CLK	17  /* Primary MDDI host clock */
+#define P_SDAC_CLK	18  /* Stereo DAC clock */
+#define P_SDC1_CLK	19  /* Secure Digital Card clocks */
+#define P_SDC1_P_CLK	20
+#define P_SDC2_CLK	21
+#define P_SDC2_P_CLK	22
+#define P_SDC3_CLK	23
+#define P_SDC3_P_CLK	24
+#define P_SDC4_CLK	25
+#define P_SDC4_P_CLK	26
+#define P_TSIF_CLK	27  /* Transport Stream Interface clocks */
+#define P_TSIF_REF_CLK	28
+#define P_TV_DAC_CLK	29  /* TV clocks */
+#define P_TV_ENC_CLK	30
+#define P_UART1_CLK	31  /* UART clocks */
+#define P_UART2_CLK	32
+#define P_UART3_CLK	33
+#define P_UART1DM_CLK	34
+#define P_UART2DM_CLK	35
+#define P_USB_HS_CLK	36  /* High speed USB core clock */
+#define P_USB_HS_P_CLK	37  /* High speed USB pbus clock */
+#define P_USB_OTG_CLK	38  /* Full speed USB clock */
+#define P_VDC_CLK	39  /* Video controller clock */
+#define P_VFE_MDC_CLK	40  /* Camera / Video Front End clock */
+#define P_VFE_CLK	41  /* VFE MDDI client clock */
+#define P_MDP_LCDC_PCLK_CLK	42
+#define P_MDP_LCDC_PAD_PCLK_CLK 43
+#define P_MDP_VSYNC_CLK	44
+#define P_SPI_CLK	45
+#define P_VFE_AXI_CLK	46
+#define P_USB_HS2_CLK	47  /* High speed USB 2 core clock */
+#define P_USB_HS2_P_CLK	48  /* High speed USB 2 pbus clock */
+#define P_USB_HS3_CLK	49  /* High speed USB 3 core clock */
+#define P_USB_HS3_P_CLK	50  /* High speed USB 3 pbus clock */
+#define P_GRP_3D_P_CLK	51  /* Graphics pbus clock */
+#define P_USB_PHY_CLK	52  /* USB PHY clock */
+#define P_USB_HS_CORE_CLK	53  /* High speed USB 1 core clock */
+#define P_USB_HS2_CORE_CLK	54  /* High speed USB 2 core clock */
+#define P_USB_HS3_CORE_CLK	55  /* High speed USB 3 core clock */
+#define P_CAM_M_CLK		56
+#define P_CAMIF_PAD_P_CLK	57
+#define P_GRP_2D_CLK		58
+#define P_GRP_2D_P_CLK		59
+#define P_I2S_CLK		60
+#define P_JPEG_CLK		61
+#define P_JPEG_P_CLK		62
+#define P_LPA_CODEC_CLK		63
+#define P_LPA_CORE_CLK		64
+#define P_LPA_P_CLK		65
+#define P_MDC_IO_CLK		66
+#define P_MDC_P_CLK		67
+#define P_MFC_CLK		68
+#define P_MFC_DIV2_CLK		69
+#define P_MFC_P_CLK		70
+#define P_QUP_I2C_CLK		71
+#define P_ROTATOR_IMEM_CLK	72
+#define P_ROTATOR_P_CLK		73
+#define P_VFE_CAMIF_CLK		74
+#define P_VFE_P_CLK		75
+#define P_VPE_CLK		76
+#define P_I2C_2_CLK		77
+#define P_MI2S_CODEC_RX_S_CLK	78
+#define P_MI2S_CODEC_RX_M_CLK	79
+#define P_MI2S_CODEC_TX_S_CLK	80
+#define P_MI2S_CODEC_TX_M_CLK	81
+#define P_PMDH_P_CLK		82
+#define P_EMDH_P_CLK		83
+#define P_SPI_P_CLK		84
+#define P_TSIF_P_CLK		85
+#define P_MDP_P_CLK		86
+#define P_SDAC_M_CLK		87
+#define P_MI2S_S_CLK		88
+#define P_MI2S_M_CLK		89
+#define P_AXI_ROTATOR_CLK	90
+#define P_HDMI_CLK		91
+#define P_CSI0_CLK		92
+#define P_CSI0_VFE_CLK		93
+#define P_CSI0_P_CLK		94
+#define P_CSI1_CLK		95
+#define P_CSI1_VFE_CLK		96
+#define P_CSI1_P_CLK		97
+#define P_GSBI_CLK		98
+#define P_GSBI_P_CLK		99
+
+#define P_NR_CLKS		100
+
+struct clk_ops;
+extern struct clk_ops clk_ops_pcom;
+
+int pc_clk_reset(unsigned id, enum clk_reset_action action);
+
+#define CLK_PCOM(clk_name, clk_id, clk_dev, clk_flags) {	\
+	.name = clk_name, \
+	.id = P_##clk_id, \
+	.remote_id = P_##clk_id, \
+	.ops = &clk_ops_pcom, \
+	.flags = clk_flags, \
+	.dev = clk_dev, \
+	.dbg_name = #clk_id, \
+	}
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/devices.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/devices.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/devices.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/devices.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,268 +0,0 @@
-/* linux/arch/arm/mach-msm/devices.c
- *
- * Copyright (C) 2008 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/msm_iomap.h>
-#include "devices.h"
-
-#include <asm/mach/flash.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-static struct resource resources_uart1[] = {
-	{
-		.start	= INT_UART1,
-		.end	= INT_UART1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART1_PHYS,
-		.end	= MSM_UART1_PHYS + MSM_UART1_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource resources_uart2[] = {
-	{
-		.start	= INT_UART2,
-		.end	= INT_UART2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART2_PHYS,
-		.end	= MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource resources_uart3[] = {
-	{
-		.start	= INT_UART3,
-		.end	= INT_UART3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= MSM_UART3_PHYS,
-		.end	= MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-struct platform_device msm_device_uart1 = {
-	.name	= "msm_serial",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(resources_uart1),
-	.resource	= resources_uart1,
-};
-
-struct platform_device msm_device_uart2 = {
-	.name	= "msm_serial",
-	.id	= 1,
-	.num_resources	= ARRAY_SIZE(resources_uart2),
-	.resource	= resources_uart2,
-};
-
-struct platform_device msm_device_uart3 = {
-	.name	= "msm_serial",
-	.id	= 2,
-	.num_resources	= ARRAY_SIZE(resources_uart3),
-	.resource	= resources_uart3,
-};
-
-static struct resource resources_i2c[] = {
-	{
-		.start	= MSM_I2C_PHYS,
-		.end	= MSM_I2C_PHYS + MSM_I2C_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_PWB_I2C,
-		.end	= INT_PWB_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_i2c = {
-	.name		= "msm_i2c",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(resources_i2c),
-	.resource	= resources_i2c,
-};
-
-static struct resource resources_hsusb[] = {
-	{
-		.start	= MSM_HSUSB_PHYS,
-		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_USB_HS,
-		.end	= INT_USB_HS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device msm_device_hsusb = {
-	.name		= "msm_hsusb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_hsusb),
-	.resource	= resources_hsusb,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct flash_platform_data msm_nand_data = {
-	.parts		= NULL,
-	.nr_parts	= 0,
-};
-
-static struct resource resources_nand[] = {
-	[0] = {
-		.start	= 7,
-		.end	= 7,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device msm_device_nand = {
-	.name		= "msm_nand",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(resources_nand),
-	.resource	= resources_nand,
-	.dev		= {
-		.platform_data	= &msm_nand_data,
-	},
-};
-
-struct platform_device msm_device_smd = {
-	.name	= "msm_smd",
-	.id	= -1,
-};
-
-static struct resource resources_sdc1[] = {
-	{
-		.start	= MSM_SDC1_PHYS,
-		.end	= MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC1_0,
-		.end	= INT_SDC1_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc2[] = {
-	{
-		.start	= MSM_SDC2_PHYS,
-		.end	= MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC2_0,
-		.end	= INT_SDC2_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc3[] = {
-	{
-		.start	= MSM_SDC3_PHYS,
-		.end	= MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC3_0,
-		.end	= INT_SDC3_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-static struct resource resources_sdc4[] = {
-	{
-		.start	= MSM_SDC4_PHYS,
-		.end	= MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= INT_SDC4_0,
-		.end	= INT_SDC4_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.start	= 8,
-		.end	= 8,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device msm_device_sdc1 = {
-	.name		= "msm_sdcc",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(resources_sdc1),
-	.resource	= resources_sdc1,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc2 = {
-	.name		= "msm_sdcc",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(resources_sdc2),
-	.resource	= resources_sdc2,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc3 = {
-	.name		= "msm_sdcc",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(resources_sdc3),
-	.resource	= resources_sdc3,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
-
-struct platform_device msm_device_sdc4 = {
-	.name		= "msm_sdcc",
-	.id		= 4,
-	.num_resources	= ARRAY_SIZE(resources_sdc4),
-	.resource	= resources_sdc4,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/devices.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/devices.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/devices.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/devices.h	2010-08-01 18:11:14.000000000 -0400
@@ -16,6 +16,8 @@
 #ifndef __ARCH_ARM_MACH_MSM_DEVICES_H
 #define __ARCH_ARM_MACH_MSM_DEVICES_H
 
+#include "clock.h"
+
 extern struct platform_device msm_device_uart1;
 extern struct platform_device msm_device_uart2;
 extern struct platform_device msm_device_uart3;
@@ -33,4 +35,13 @@
 
 extern struct platform_device msm_device_nand;
 
+extern struct clk msm_clocks_7x01a[];
+extern unsigned msm_num_clocks_7x01a;
+
+extern struct clk msm_clocks_7x30[];
+extern unsigned msm_num_clocks_7x30;
+
+extern struct clk msm_clocks_8x50[];
+extern unsigned msm_num_clocks_8x50;
+
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/devices-msm7x00.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/devices-msm7x00.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/devices-msm7x00.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/devices-msm7x00.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,393 @@
+/* linux/arch/arm/mach-msm/devices.c
+ *
+ * Copyright (C) 2008 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/msm_iomap.h>
+#include "devices.h"
+
+#include <asm/mach/flash.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+
+#include "clock.h"
+#include <mach/mmc.h>
+
+static struct resource resources_uart1[] = {
+	{
+		.start	= INT_UART1,
+		.end	= INT_UART1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART1_PHYS,
+		.end	= MSM_UART1_PHYS + MSM_UART1_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource resources_uart2[] = {
+	{
+		.start	= INT_UART2,
+		.end	= INT_UART2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART2_PHYS,
+		.end	= MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource resources_uart3[] = {
+	{
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART3_PHYS,
+		.end	= MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device msm_device_uart1 = {
+	.name	= "msm_serial",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(resources_uart1),
+	.resource	= resources_uart1,
+};
+
+struct platform_device msm_device_uart2 = {
+	.name	= "msm_serial",
+	.id	= 1,
+	.num_resources	= ARRAY_SIZE(resources_uart2),
+	.resource	= resources_uart2,
+};
+
+struct platform_device msm_device_uart3 = {
+	.name	= "msm_serial",
+	.id	= 2,
+	.num_resources	= ARRAY_SIZE(resources_uart3),
+	.resource	= resources_uart3,
+};
+
+static struct resource resources_i2c[] = {
+	{
+		.start	= MSM_I2C_PHYS,
+		.end	= MSM_I2C_PHYS + MSM_I2C_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_PWB_I2C,
+		.end	= INT_PWB_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_i2c = {
+	.name		= "msm_i2c",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(resources_i2c),
+	.resource	= resources_i2c,
+};
+
+static struct resource resources_hsusb[] = {
+	{
+		.start	= MSM_HSUSB_PHYS,
+		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_HS,
+		.end	= INT_USB_HS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_hsusb = {
+	.name		= "msm_hsusb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_hsusb),
+	.resource	= resources_hsusb,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct flash_platform_data msm_nand_data = {
+	.parts		= NULL,
+	.nr_parts	= 0,
+};
+
+static struct resource resources_nand[] = {
+	[0] = {
+		.start	= 7,
+		.end	= 7,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device msm_device_nand = {
+	.name		= "msm_nand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_nand),
+	.resource	= resources_nand,
+	.dev		= {
+		.platform_data	= &msm_nand_data,
+	},
+};
+
+struct platform_device msm_device_smd = {
+	.name	= "msm_smd",
+	.id	= -1,
+};
+
+static struct resource resources_sdc1[] = {
+	{
+		.start	= MSM_SDC1_PHYS,
+		.end	= MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC1_0,
+		.end	= INT_SDC1_0,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "cmd_irq",
+	},
+	{
+		.start	= INT_SDC1_1,
+		.end	= INT_SDC1_1,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "pio_irq",
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
+		.name	= "status_irq"
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource resources_sdc2[] = {
+	{
+		.start	= MSM_SDC2_PHYS,
+		.end	= MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC2_0,
+		.end	= INT_SDC2_0,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "cmd_irq",
+	},
+		{
+		.start	= INT_SDC2_1,
+		.end	= INT_SDC2_1,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "pio_irq",
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
+		.name	= "status_irq"
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource resources_sdc3[] = {
+	{
+		.start	= MSM_SDC3_PHYS,
+		.end	= MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC3_0,
+		.end	= INT_SDC3_0,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "cmd_irq",
+	},
+		{
+		.start	= INT_SDC3_1,
+		.end	= INT_SDC3_1,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "pio_irq",
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
+		.name	= "status_irq"
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource resources_sdc4[] = {
+	{
+		.start	= MSM_SDC4_PHYS,
+		.end	= MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_SDC4_0,
+		.end	= INT_SDC4_0,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "cmd_irq",
+	},
+		{
+		.start	= INT_SDC4_1,
+		.end	= INT_SDC4_1,
+		.flags	= IORESOURCE_IRQ,
+		.name	= "pio_irq",
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_DISABLED,
+		.name	= "status_irq"
+	},
+	{
+		.start	= 8,
+		.end	= 8,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device msm_device_sdc1 = {
+	.name		= "msm_sdcc",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(resources_sdc1),
+	.resource	= resources_sdc1,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_sdc2 = {
+	.name		= "msm_sdcc",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(resources_sdc2),
+	.resource	= resources_sdc2,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_sdc3 = {
+	.name		= "msm_sdcc",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(resources_sdc3),
+	.resource	= resources_sdc3,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_sdc4 = {
+	.name		= "msm_sdcc",
+	.id		= 4,
+	.num_resources	= ARRAY_SIZE(resources_sdc4),
+	.resource	= resources_sdc4,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+static struct platform_device *msm_sdcc_devices[] __initdata = {
+	&msm_device_sdc1,
+	&msm_device_sdc2,
+	&msm_device_sdc3,
+	&msm_device_sdc4,
+};
+
+int __init msm_add_sdcc(unsigned int controller, struct mmc_platform_data *plat,
+			unsigned int stat_irq, unsigned long stat_irq_flags)
+{
+	struct platform_device	*pdev;
+	struct resource *res;
+
+	if (controller < 1 || controller > 4)
+		return -EINVAL;
+
+	pdev = msm_sdcc_devices[controller-1];
+	pdev->dev.platform_data = plat;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq");
+	if (!res)
+		return -EINVAL;
+	else if (stat_irq) {
+		res->start = res->end = stat_irq;
+		res->flags &= ~IORESOURCE_DISABLED;
+		res->flags |= stat_irq_flags;
+	}
+
+	return platform_device_register(pdev);
+}
+
+struct clk msm_clocks_7x01a[] = {
+	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
+	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
+	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, 0),
+	CLK_PCOM("ebi2_clk",	EBI2_CLK,	NULL, 0),
+	CLK_PCOM("ecodec_clk",	ECODEC_CLK,	NULL, 0),
+	CLK_PCOM("emdh_clk",	EMDH_CLK,	NULL, OFF),
+	CLK_PCOM("gp_clk",		GP_CLK,		NULL, 0),
+	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, OFF),
+	CLK_PCOM("i2c_clk",	I2C_CLK,	&msm_device_i2c.dev, 0),
+	CLK_PCOM("icodec_rx_clk",	ICODEC_RX_CLK,	NULL, 0),
+	CLK_PCOM("icodec_tx_clk",	ICODEC_TX_CLK,	NULL, 0),
+	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
+	CLK_PCOM("mdc_clk",	MDC_CLK,	NULL, 0),
+	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
+	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, 0),
+	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
+	CLK_PCOM("pmdh_clk",	PMDH_CLK,	NULL, OFF ),
+	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
+	CLK_PCOM("sdc_clk",	SDC1_CLK,	&msm_device_sdc1.dev, OFF),
+	CLK_PCOM("sdc_pclk",	SDC1_P_CLK,	&msm_device_sdc1.dev, OFF),
+	CLK_PCOM("sdc_clk",	SDC2_CLK,	&msm_device_sdc2.dev, OFF),
+	CLK_PCOM("sdc_pclk",	SDC2_P_CLK,	&msm_device_sdc2.dev, OFF),
+	CLK_PCOM("sdc_clk",	SDC3_CLK,	&msm_device_sdc3.dev, OFF),
+	CLK_PCOM("sdc_pclk",	SDC3_P_CLK,	&msm_device_sdc3.dev, OFF),
+	CLK_PCOM("sdc_clk",	SDC4_CLK,	&msm_device_sdc4.dev, OFF),
+	CLK_PCOM("sdc_pclk",	SDC4_P_CLK,	&msm_device_sdc4.dev, OFF),
+	CLK_PCOM("tsif_clk",	TSIF_CLK,	NULL, 0),
+	CLK_PCOM("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
+	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
+	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
+	CLK_PCOM("uart_clk",	UART1_CLK,	&msm_device_uart1.dev, OFF),
+	CLK_PCOM("uart_clk",	UART2_CLK,	&msm_device_uart2.dev, 0),
+	CLK_PCOM("uart_clk",	UART3_CLK,	&msm_device_uart3.dev, OFF),
+	CLK_PCOM("uart1dm_clk",	UART1DM_CLK,	NULL, OFF),
+	CLK_PCOM("uart2dm_clk",	UART2DM_CLK,	NULL, 0),
+	CLK_PCOM("usb_hs_clk",	USB_HS_CLK,	&msm_device_hsusb.dev, OFF),
+	CLK_PCOM("usb_hs_pclk",	USB_HS_P_CLK,	&msm_device_hsusb.dev, OFF),
+	CLK_PCOM("usb_otg_clk",	USB_OTG_CLK,	NULL, 0),
+	CLK_PCOM("vdc_clk",	VDC_CLK,	NULL, OFF ),
+	CLK_PCOM("vfe_clk",	VFE_CLK,	NULL, OFF),
+	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
+};
+
+unsigned msm_num_clocks_7x01a = ARRAY_SIZE(msm_clocks_7x01a);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/devices-msm7x30.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/devices-msm7x30.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/devices-msm7x30.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/devices-msm7x30.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/dma-mapping.h>
+#include <mach/irqs.h>
+#include <mach/msm_iomap.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "devices.h"
+#include "smd_private.h"
+
+#include <asm/mach/flash.h>
+
+#include "clock-pcom.h"
+
+#include <mach/mmc.h>
+
+static struct resource resources_uart2[] = {
+	{
+		.start	= INT_UART2,
+		.end	= INT_UART2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART2_PHYS,
+		.end	= MSM_UART2_PHYS + MSM_UART2_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device msm_device_uart2 = {
+	.name	= "msm_serial",
+	.id	= 1,
+	.num_resources	= ARRAY_SIZE(resources_uart2),
+	.resource	= resources_uart2,
+};
+
+struct clk msm_clocks_7x30[] = {
+	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
+	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
+	CLK_PCOM("cam_m_clk",	CAM_M_CLK,	NULL, 0),
+	CLK_PCOM("camif_pad_pclk",	CAMIF_PAD_P_CLK,	NULL, OFF),
+	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, CLK_MIN),
+	CLK_PCOM("ecodec_clk",	ECODEC_CLK,	NULL, 0),
+	CLK_PCOM("emdh_clk",	EMDH_CLK,	NULL, OFF | CLK_MINMAX),
+	CLK_PCOM("emdh_pclk",	EMDH_P_CLK,	NULL, OFF),
+	CLK_PCOM("gp_clk",	GP_CLK,		NULL, 0),
+	CLK_PCOM("grp_2d_clk",	GRP_2D_CLK,	NULL, 0),
+	CLK_PCOM("grp_2d_pclk",	GRP_2D_P_CLK,	NULL, 0),
+	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, 0),
+	CLK_PCOM("grp_pclk",	GRP_3D_P_CLK,	NULL, 0),
+	CLK_7X30S("grp_src_clk", GRP_3D_SRC_CLK, GRP_3D_CLK,	NULL, 0),
+	CLK_PCOM("hdmi_clk",	HDMI_CLK,	NULL, 0),
+	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
+	CLK_PCOM("jpeg_clk",	JPEG_CLK,	NULL, OFF),
+	CLK_PCOM("jpeg_pclk",	JPEG_P_CLK,	NULL, OFF),
+	CLK_PCOM("lpa_codec_clk",	LPA_CODEC_CLK,		NULL, 0),
+	CLK_PCOM("lpa_core_clk",	LPA_CORE_CLK,		NULL, 0),
+	CLK_PCOM("lpa_pclk",		LPA_P_CLK,		NULL, 0),
+	CLK_PCOM("mdc_clk",	MDC_CLK,	NULL, 0),
+	CLK_PCOM("mddi_clk",	PMDH_CLK,	NULL, OFF | CLK_MINMAX),
+	CLK_PCOM("mddi_pclk",	PMDH_P_CLK,	NULL, 0),
+	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
+	CLK_PCOM("mdp_pclk",	MDP_P_CLK,	NULL, 0),
+	CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0),
+	CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0),
+	CLK_PCOM("mdp_vsync_clk",	MDP_VSYNC_CLK,  NULL, 0),
+	CLK_PCOM("mfc_clk",		MFC_CLK,		NULL, 0),
+	CLK_PCOM("mfc_div2_clk",	MFC_DIV2_CLK,		NULL, 0),
+	CLK_PCOM("mfc_pclk",		MFC_P_CLK,		NULL, 0),
+	CLK_PCOM("mi2s_m_clk",		MI2S_M_CLK,  		NULL, 0),
+	CLK_PCOM("mi2s_s_clk",		MI2S_S_CLK,  		NULL, 0),
+	CLK_PCOM("mi2s_codec_rx_m_clk",	MI2S_CODEC_RX_M_CLK,  NULL, 0),
+	CLK_PCOM("mi2s_codec_rx_s_clk",	MI2S_CODEC_RX_S_CLK,  NULL, 0),
+	CLK_PCOM("mi2s_codec_tx_m_clk",	MI2S_CODEC_TX_M_CLK,  NULL, 0),
+	CLK_PCOM("mi2s_codec_tx_s_clk",	MI2S_CODEC_TX_S_CLK,  NULL, 0),
+	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, CLK_MIN),
+	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
+	CLK_PCOM("rotator_clk",	AXI_ROTATOR_CLK,		NULL, 0),
+	CLK_PCOM("rotator_imem_clk",	ROTATOR_IMEM_CLK,	NULL, OFF),
+	CLK_PCOM("rotator_pclk",	ROTATOR_P_CLK,		NULL, OFF),
+	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
+	CLK_PCOM("spi_clk",	SPI_CLK,	NULL, 0),
+	CLK_PCOM("spi_pclk",	SPI_P_CLK,	NULL, 0),
+	CLK_7X30S("tv_src_clk",	TV_CLK, 	TV_ENC_CLK,	NULL, 0),
+	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
+	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
+	CLK_PCOM("uart_clk",	UART2_CLK,	&msm_device_uart2.dev, 0),
+	CLK_PCOM("usb_hs_clk",		USB_HS_CLK,		NULL, OFF),
+	CLK_PCOM("usb_hs_pclk",		USB_HS_P_CLK,		NULL, OFF),
+	CLK_PCOM("usb_hs_core_clk",	USB_HS_CORE_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs2_clk",		USB_HS2_CLK,		NULL, OFF),
+	CLK_PCOM("usb_hs2_pclk",	USB_HS2_P_CLK,		NULL, OFF),
+	CLK_PCOM("usb_hs2_core_clk",	USB_HS2_CORE_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs3_clk",		USB_HS3_CLK,		NULL, OFF),
+	CLK_PCOM("usb_hs3_pclk",	USB_HS3_P_CLK,		NULL, OFF),
+	CLK_PCOM("usb_hs3_core_clk",	USB_HS3_CORE_CLK,	NULL, OFF),
+	CLK_PCOM("vdc_clk",	VDC_CLK,	NULL, OFF | CLK_MIN),
+	CLK_PCOM("vfe_camif_clk",	VFE_CAMIF_CLK, 	NULL, 0),
+	CLK_PCOM("vfe_clk",	VFE_CLK,	NULL, 0),
+	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, 0),
+	CLK_PCOM("vfe_pclk",	VFE_P_CLK,	NULL, OFF),
+	CLK_PCOM("vpe_clk",	VPE_CLK,	NULL, 0),
+
+	/* 7x30 v2 hardware only. */
+	CLK_PCOM("csi_clk",	CSI0_CLK,	NULL, 0),
+	CLK_PCOM("csi_pclk",	CSI0_P_CLK,	NULL, 0),
+	CLK_PCOM("csi_vfe_clk",	CSI0_VFE_CLK,	NULL, 0),
+};
+
+unsigned msm_num_clocks_7x30 = ARRAY_SIZE(msm_clocks_7x30);
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/devices-qsd8x50.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/devices-qsd8x50.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/devices-qsd8x50.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/devices-qsd8x50.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <linux/dma-mapping.h>
+#include <mach/irqs.h>
+#include <mach/msm_iomap.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "devices.h"
+
+#include <asm/mach/flash.h>
+
+#include <mach/mmc.h>
+
+static struct resource resources_uart3[] = {
+	{
+		.start	= INT_UART3,
+		.end	= INT_UART3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= MSM_UART3_PHYS,
+		.end	= MSM_UART3_PHYS + MSM_UART3_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device msm_device_uart3 = {
+	.name	= "msm_serial",
+	.id	= 2,
+	.num_resources	= ARRAY_SIZE(resources_uart3),
+	.resource	= resources_uart3,
+};
+
+struct clk msm_clocks_8x50[] = {
+	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
+	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, CLK_MIN),
+	CLK_PCOM("ebi2_clk",	EBI2_CLK,	NULL, 0),
+	CLK_PCOM("ecodec_clk",	ECODEC_CLK,	NULL, 0),
+	CLK_PCOM("emdh_clk",	EMDH_CLK,	NULL, OFF | CLK_MINMAX),
+	CLK_PCOM("gp_clk",	GP_CLK,		NULL, 0),
+	CLK_PCOM("grp_clk",	GRP_3D_CLK,	NULL, 0),
+	CLK_PCOM("icodec_rx_clk",	ICODEC_RX_CLK,	NULL, 0),
+	CLK_PCOM("icodec_tx_clk",	ICODEC_TX_CLK,	NULL, 0),
+	CLK_PCOM("imem_clk",	IMEM_CLK,	NULL, OFF),
+	CLK_PCOM("mdc_clk",	MDC_CLK,	NULL, 0),
+	CLK_PCOM("mddi_clk",	PMDH_CLK,	NULL, OFF | CLK_MINMAX),
+	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
+	CLK_PCOM("mdp_lcdc_pclk_clk", MDP_LCDC_PCLK_CLK, NULL, 0),
+	CLK_PCOM("mdp_lcdc_pad_pclk_clk", MDP_LCDC_PAD_PCLK_CLK, NULL, 0),
+	CLK_PCOM("mdp_vsync_clk",	MDP_VSYNC_CLK,	NULL, 0),
+	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, CLK_MIN),
+	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
+	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
+	CLK_PCOM("spi_clk",	SPI_CLK,	NULL, 0),
+	CLK_PCOM("tsif_clk",	TSIF_CLK,	NULL, 0),
+	CLK_PCOM("tsif_ref_clk",	TSIF_REF_CLK,	NULL, 0),
+	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
+	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
+	CLK_PCOM("uart_clk",	UART3_CLK,	&msm_device_uart3.dev, OFF),
+	CLK_PCOM("usb_hs_clk",	USB_HS_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs_pclk",	USB_HS_P_CLK,	NULL, OFF),
+	CLK_PCOM("usb_otg_clk",	USB_OTG_CLK,	NULL, 0),
+	CLK_PCOM("vdc_clk",	VDC_CLK,	NULL, OFF | CLK_MIN),
+	CLK_PCOM("vfe_clk",	VFE_CLK,	NULL, OFF),
+	CLK_PCOM("vfe_mdc_clk",	VFE_MDC_CLK,	NULL, OFF),
+	CLK_PCOM("vfe_axi_clk",	VFE_AXI_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs2_clk",	USB_HS2_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs2_pclk",	USB_HS2_P_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs3_clk",	USB_HS3_CLK,	NULL, OFF),
+	CLK_PCOM("usb_hs3_pclk",	USB_HS3_P_CLK,	NULL, OFF),
+	CLK_PCOM("usb_phy_clk",	USB_PHY_CLK,	NULL, 0),
+};
+
+unsigned msm_num_clocks_8x50 = ARRAY_SIZE(msm_clocks_8x50);
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/dma.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/dma.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/dma.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -13,8 +13,11 @@
  *
  */
 
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
+#include <linux/completion.h>
 #include <mach/dma.h>
 
 #define MSM_DMOV_CHANNEL_COUNT 16
@@ -26,6 +29,7 @@
 };
 
 static DEFINE_SPINLOCK(msm_dmov_lock);
+static struct clk *msm_dmov_clk;
 static unsigned int channel_active;
 static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT];
 static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT];
@@ -54,6 +58,9 @@
 	unsigned int status;
 
 	spin_lock_irqsave(&msm_dmov_lock, irq_flags);
+	if (!channel_active)
+		clk_enable(msm_dmov_clk);
+	dsb();
 	status = readl(DMOV_STATUS(id));
 	if (list_empty(&ready_commands[id]) &&
 		(status & DMOV_STATUS_CMD_PTR_RDY)) {
@@ -63,6 +70,8 @@
 			writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id));
 		}
 #endif
+		if (cmd->execute_func)
+			cmd->execute_func(cmd);
 		PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status);
 		list_add_tail(&cmd->list, &active_commands[id]);
 		if (!channel_active)
@@ -70,6 +79,8 @@
 		channel_active |= 1U << id;
 		writel(cmd->cmdptr, DMOV_CMD_PTR(id));
 	} else {
+		if (!channel_active)
+			clk_disable(msm_dmov_clk);
 		if (list_empty(&active_commands[id]))
 			PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status);
 
@@ -108,6 +119,7 @@
 
 	cmd.dmov_cmd.cmdptr = cmdptr;
 	cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func;
+	cmd.dmov_cmd.execute_func = NULL;
 	cmd.id = id;
 	init_completion(&cmd.complete);
 
@@ -165,6 +177,7 @@
 					"for %p, result %x\n", id, cmd, ch_result);
 				if (cmd) {
 					list_del(&cmd->list);
+					dsb();
 					cmd->complete_func(cmd, ch_result, NULL);
 				}
 			}
@@ -181,6 +194,7 @@
 				PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
 				if (cmd) {
 					list_del(&cmd->list);
+					dsb();
 					cmd->complete_func(cmd, ch_result, &errdata);
 				}
 			}
@@ -198,6 +212,7 @@
 				PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]);
 				if (cmd) {
 					list_del(&cmd->list);
+					dsb();
 					cmd->complete_func(cmd, ch_result, &errdata);
 				}
 				/* this does not seem to work, once we get an error */
@@ -210,6 +225,8 @@
 				cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
 				list_del(&cmd->list);
 				list_add_tail(&cmd->list, &active_commands[id]);
+				if (cmd->execute_func)
+					cmd->execute_func(cmd);
 				PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
 				writel(cmd->cmdptr, DMOV_CMD_PTR(id));
 			}
@@ -219,8 +236,10 @@
 		PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
 	}
 
-	if (!channel_active)
-		disable_irq(INT_ADM_AARM);
+	if (!channel_active) {
+		disable_irq_nosync(INT_ADM_AARM);
+		clk_disable(msm_dmov_clk);
+	}
 
 	spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
 	return IRQ_HANDLED;
@@ -230,11 +249,17 @@
 {
 	int i;
 	int ret;
+	struct clk *clk;
+
 	for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) {
 		INIT_LIST_HEAD(&ready_commands[i]);
 		INIT_LIST_HEAD(&active_commands[i]);
 		writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i));
 	}
+	clk = clk_get(NULL, "adm_clk");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	msm_dmov_clk = clk;
 	ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
 	if (ret)
 		return ret;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/gpio.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/gpio.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,85 @@
+/* linux/arch/arm/mach-msm/gpio.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <mach/gpio.h>
+#include "proc_comm.h"
+
+int gpio_tlmm_config(unsigned config, unsigned disable)
+{
+	return msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, &disable);
+}
+EXPORT_SYMBOL(gpio_tlmm_config);
+
+int msm_gpios_enable(const struct msm_gpio *table, int size)
+{
+	int rc;
+	int i;
+	const struct msm_gpio *g;
+	for (i = 0; i < size; i++) {
+		g = table + i;
+		rc = gpio_tlmm_config(g->gpio_cfg, GPIO_ENABLE);
+		if (rc) {
+			pr_err("gpio_tlmm_config(0x%08x, GPIO_ENABLE)"
+			       " <%s> failed: %d\n",
+			       g->gpio_cfg, g->label ?: "?", rc);
+			pr_err("pin %d func %d dir %d pull %d drvstr %d\n",
+			       GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg),
+			       GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg),
+			       GPIO_DRVSTR(g->gpio_cfg));
+			goto err;
+		}
+	}
+	return 0;
+err:
+	msm_gpios_disable(table, i);
+	return rc;
+}
+EXPORT_SYMBOL(msm_gpios_enable);
+
+void msm_gpios_disable(const struct msm_gpio *table, int size)
+{
+	int rc;
+	int i;
+	const struct msm_gpio *g;
+	for (i = size-1; i >= 0; i--) {
+		g = table + i;
+		rc = gpio_tlmm_config(g->gpio_cfg, GPIO_DISABLE);
+		if (rc) {
+			pr_err("gpio_tlmm_config(0x%08x, GPIO_DISABLE)"
+			       " <%s> failed: %d\n",
+			       g->gpio_cfg, g->label ?: "?", rc);
+			pr_err("pin %d func %d dir %d pull %d drvstr %d\n",
+			       GPIO_PIN(g->gpio_cfg), GPIO_FUNC(g->gpio_cfg),
+			       GPIO_DIR(g->gpio_cfg), GPIO_PULL(g->gpio_cfg),
+			       GPIO_DRVSTR(g->gpio_cfg));
+		}
+	}
+}
+EXPORT_SYMBOL(msm_gpios_disable);
+
+int msm_gpios_request_enable(const struct msm_gpio *table, int size)
+{
+	int rc = msm_gpios_enable(table, size);
+	return rc;
+}
+EXPORT_SYMBOL(msm_gpios_request_enable);
+
+void msm_gpios_disable_free(const struct msm_gpio *table, int size)
+{
+	msm_gpios_disable(table, size);
+}
+EXPORT_SYMBOL(msm_gpios_disable_free);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/board.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/board.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/board.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/board.h	2010-08-01 18:11:14.000000000 -0400
@@ -21,18 +21,24 @@
 
 /* platform device data structures */
 
-struct msm_mddi_platform_data
+struct msm_acpu_clock_platform_data
 {
-	void (*panel_power)(int on);
-	unsigned has_vsync_irq:1;
+	uint32_t acpu_switch_time_us;
+	uint32_t max_speed_delta_khz;
+	uint32_t vdd_switch_time_us;
+	unsigned long power_collapse_khz;
+	unsigned long wait_for_irq_khz;
 };
 
+struct clk;
+
 /* common init routines for use by arch/arm/mach-msm/board-*.c */
 
 void __init msm_add_devices(void);
 void __init msm_map_common_io(void);
 void __init msm_init_irq(void);
 void __init msm_init_gpio(void);
-void __init msm_clock_init(void);
+void __init msm_clock_init(struct clk *clock_tbl, unsigned num_clocks);
+void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *);
 
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/clk.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/clk.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/clk.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/clk.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,57 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef __MACH_CLK_H
+#define __MACH_CLK_H
+
+/* Magic rate value for use with PM QOS to request the board's maximum
+ * supported AXI rate. PM QOS will only pass positive s32 rate values
+ * through to the clock driver, so INT_MAX is used.
+ */
+#define MSM_AXI_MAX_FREQ	LONG_MAX
+
+enum clk_reset_action {
+	CLK_RESET_DEASSERT	= 0,
+	CLK_RESET_ASSERT	= 1
+};
+
+struct clk;
+
+/* Rate is minimum clock rate in Hz */
+int clk_set_min_rate(struct clk *clk, unsigned long rate);
+
+/* Rate is maximum clock rate in Hz */
+int clk_set_max_rate(struct clk *clk, unsigned long rate);
+
+/* Assert/Deassert reset to a hardware block associated with a clock */
+int clk_reset(struct clk *clk, enum clk_reset_action action);
+
+/* Set clock-specific configuration parameters */
+int clk_set_flags(struct clk *clk, unsigned long flags);
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/dma.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/dma.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/dma.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/dma.h	2010-08-01 18:11:14.000000000 -0400
@@ -28,6 +28,8 @@
 	void (*complete_func)(struct msm_dmov_cmd *cmd,
 			      unsigned int result,
 			      struct msm_dmov_errdata *err);
+	void (*execute_func)(struct msm_dmov_cmd *cmd);
+	void *data;
 };
 
 void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
@@ -41,40 +43,42 @@
 #define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
 #define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
 
-/* only security domain 3 is available to the ARM11
- * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
- */
+#if defined(CONFIG_ARCH_MSM7X30)
+#define DMOV_SD_AARM DMOV_SD2
+#else
+#define DMOV_SD_AARM DMOV_SD3
+#endif
 
-#define DMOV_CMD_PTR(ch)      DMOV_SD3(0x000, ch)
+#define DMOV_CMD_PTR(ch)      DMOV_SD_AARM(0x000, ch)
 #define DMOV_CMD_LIST         (0 << 29) /* does not work */
 #define DMOV_CMD_PTR_LIST     (1 << 29) /* works */
 #define DMOV_CMD_INPUT_CFG    (2 << 29) /* untested */
 #define DMOV_CMD_OUTPUT_CFG   (3 << 29) /* untested */
 #define DMOV_CMD_ADDR(addr)   ((addr) >> 3)
 
-#define DMOV_RSLT(ch)         DMOV_SD3(0x040, ch)
+#define DMOV_RSLT(ch)         DMOV_SD_AARM(0x040, ch)
 #define DMOV_RSLT_VALID       (1 << 31) /* 0 == host has empties result fifo */
 #define DMOV_RSLT_ERROR       (1 << 3)
 #define DMOV_RSLT_FLUSH       (1 << 2)
 #define DMOV_RSLT_DONE        (1 << 1)  /* top pointer done */
 #define DMOV_RSLT_USER        (1 << 0)  /* command with FR force result */
 
-#define DMOV_FLUSH0(ch)       DMOV_SD3(0x080, ch)
-#define DMOV_FLUSH1(ch)       DMOV_SD3(0x0C0, ch)
-#define DMOV_FLUSH2(ch)       DMOV_SD3(0x100, ch)
-#define DMOV_FLUSH3(ch)       DMOV_SD3(0x140, ch)
-#define DMOV_FLUSH4(ch)       DMOV_SD3(0x180, ch)
-#define DMOV_FLUSH5(ch)       DMOV_SD3(0x1C0, ch)
+#define DMOV_FLUSH0(ch)       DMOV_SD_AARM(0x080, ch)
+#define DMOV_FLUSH1(ch)       DMOV_SD_AARM(0x0C0, ch)
+#define DMOV_FLUSH2(ch)       DMOV_SD_AARM(0x100, ch)
+#define DMOV_FLUSH3(ch)       DMOV_SD_AARM(0x140, ch)
+#define DMOV_FLUSH4(ch)       DMOV_SD_AARM(0x180, ch)
+#define DMOV_FLUSH5(ch)       DMOV_SD_AARM(0x1C0, ch)
 
-#define DMOV_STATUS(ch)       DMOV_SD3(0x200, ch)
+#define DMOV_STATUS(ch)       DMOV_SD_AARM(0x200, ch)
 #define DMOV_STATUS_RSLT_COUNT(n)    (((n) >> 29))
 #define DMOV_STATUS_CMD_COUNT(n)     (((n) >> 27) & 3)
 #define DMOV_STATUS_RSLT_VALID       (1 << 1)
 #define DMOV_STATUS_CMD_PTR_RDY      (1 << 0)
 
-#define DMOV_ISR              DMOV_SD3(0x380, 0)
-
-#define DMOV_CONFIG(ch)       DMOV_SD3(0x300, ch)
+#define DMOV_ISR              DMOV_SD_AARM(0x380, 0)
+  
+#define DMOV_CONFIG(ch)       DMOV_SD_AARM(0x300, ch)
 #define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
 #define DMOV_CONFIG_FORCE_FLUSH_RSLT   (1 << 1)
 #define DMOV_CONFIG_IRQ_EN             (1 << 0)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,142 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __ASM_ARCH_MSM_GPIO_H
+#define __ASM_ARCH_MSM_GPIO_H
+
+/**
+ * struct msm_gpio - GPIO pin description
+ * @gpio_cfg - configuration bitmap, as per gpio_tlmm_config()
+ * @label - textual label
+ *
+ * Usually, GPIO's are operated by sets.
+ * This struct accumulate all GPIO information in single source
+ * and facilitete group operations provided by msm_gpios_xxx()
+ */
+struct msm_gpio {
+	u32 gpio_cfg;
+	const char *label;
+};
+
+/**
+ * msm_gpios_request_enable() - request and enable set of GPIOs
+ *
+ * Request and configure set of GPIO's
+ * In case of error, all operations rolled back.
+ * Return error code.
+ *
+ * @table: GPIO table
+ * @size:  number of entries in @table
+ */
+int msm_gpios_request_enable(const struct msm_gpio *table, int size);
+
+/**
+ * msm_gpios_disable_free() - disable and free set of GPIOs
+ *
+ * @table: GPIO table
+ * @size:  number of entries in @table
+ */
+void msm_gpios_disable_free(const struct msm_gpio *table, int size);
+
+/**
+ * msm_gpios_request() - request set of GPIOs
+ * In case of error, all operations rolled back.
+ * Return error code.
+ *
+ * @table: GPIO table
+ * @size:  number of entries in @table
+ */
+int msm_gpios_request(const struct msm_gpio *table, int size);
+
+/**
+ * msm_gpios_free() - free set of GPIOs
+ *
+ * @table: GPIO table
+ * @size:  number of entries in @table
+ */
+void msm_gpios_free(const struct msm_gpio *table, int size);
+
+/**
+ * msm_gpios_enable() - enable set of GPIOs
+ * In case of error, all operations rolled back.
+ * Return error code.
+ *
+ * @table: GPIO table
+ * @size:  number of entries in @table
+ */
+int msm_gpios_enable(const struct msm_gpio *table, int size);
+
+/**
+ * msm_gpios_disable() - disable set of GPIOs
+ *
+ * @table: GPIO table
+ * @size:  number of entries in @table
+ */
+void msm_gpios_disable(const struct msm_gpio *table, int size);
+
+/* GPIO TLMM (Top Level Multiplexing) Definitions */
+
+/* GPIO TLMM: Function -- GPIO specific */
+
+/* GPIO TLMM: Direction */
+enum {
+	GPIO_INPUT,
+	GPIO_OUTPUT,
+};
+
+/* GPIO TLMM: Pullup/Pulldown */
+enum {
+	GPIO_NO_PULL,
+	GPIO_PULL_DOWN,
+	GPIO_KEEPER,
+	GPIO_PULL_UP,
+};
+
+/* GPIO TLMM: Drive Strength */
+enum {
+	GPIO_2MA,
+	GPIO_4MA,
+	GPIO_6MA,
+	GPIO_8MA,
+	GPIO_10MA,
+	GPIO_12MA,
+	GPIO_14MA,
+	GPIO_16MA,
+};
+
+enum {
+	GPIO_ENABLE,
+	GPIO_DISABLE,
+};
+
+#define GPIO_CFG(gpio, func, dir, pull, drvstr) \
+	((((gpio) & 0x3FF) << 4)        |	  \
+	 ((func) & 0xf)                  |	  \
+	 (((dir) & 0x1) << 14)           |	  \
+	 (((pull) & 0x3) << 15)          |	  \
+	 (((drvstr) & 0xF) << 17))
+
+/**
+ * extract GPIO pin from bit-field used for gpio_tlmm_config
+ */
+#define GPIO_PIN(gpio_cfg)    (((gpio_cfg) >>  4) & 0x3ff)
+#define GPIO_FUNC(gpio_cfg)   (((gpio_cfg) >>  0) & 0xf)
+#define GPIO_DIR(gpio_cfg)    (((gpio_cfg) >> 14) & 0x1)
+#define GPIO_PULL(gpio_cfg)   (((gpio_cfg) >> 15) & 0x3)
+#define GPIO_DRVSTR(gpio_cfg) (((gpio_cfg) >> 17) & 0xf)
+
+int gpio_tlmm_config(unsigned config, unsigned disable);
+
+#endif /* __ASM_ARCH_MSM_GPIO_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/io.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/io.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/io.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/io.h	2010-08-01 18:11:14.000000000 -0400
@@ -26,4 +26,9 @@
 #define __io(a)		__typesafe_io(a)
 #define __mem_pci(a)    (a)
 
+void msm_map_qsd8x50_io(void);
+void msm_map_msm7x30_io(void);
+
+extern unsigned int msm_shared_ram_phys;
+
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/irqs-7x00.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/irqs-7x00.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/irqs-7x00.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/irqs-7x00.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_7X00_H
+#define __ASM_ARCH_MSM_IRQS_7X00_H
+
+/* MSM ARM11 Interrupt Numbers */
+/* See 80-VE113-1 A, pp219-221     */
+
+#define INT_A9_M2A_0         0
+#define INT_A9_M2A_1         1
+#define INT_A9_M2A_2         2
+#define INT_A9_M2A_3         3
+#define INT_A9_M2A_4         4
+#define INT_A9_M2A_5         5
+#define INT_A9_M2A_6         6
+#define INT_GP_TIMER_EXP     7
+#define INT_DEBUG_TIMER_EXP  8
+#define INT_UART1            9
+#define INT_UART2            10
+#define INT_UART3            11
+#define INT_UART1_RX         12
+#define INT_UART2_RX         13
+#define INT_UART3_RX         14
+#define INT_USB_OTG          15
+#define INT_MDDI_PRI         16
+#define INT_MDDI_EXT         17
+#define INT_MDDI_CLIENT      18
+#define INT_MDP              19
+#define INT_GRAPHICS         20
+#define INT_ADM_AARM         21
+#define INT_ADSP_A11         22
+#define INT_ADSP_A9_A11      23
+#define INT_SDC1_0           24
+#define INT_SDC1_1           25
+#define INT_SDC2_0           26
+#define INT_SDC2_1           27
+#define INT_KEYSENSE         28
+#define INT_TCHSCRN_SSBI     29
+#define INT_TCHSCRN1         30
+#define INT_TCHSCRN2         31
+
+#define INT_GPIO_GROUP1      (32 + 0)
+#define INT_GPIO_GROUP2      (32 + 1)
+#define INT_PWB_I2C          (32 + 2)
+#define INT_SOFTRESET        (32 + 3)
+#define INT_NAND_WR_ER_DONE  (32 + 4)
+#define INT_NAND_OP_DONE     (32 + 5)
+#define INT_PBUS_ARM11       (32 + 6)
+#define INT_AXI_MPU_SMI      (32 + 7)
+#define INT_AXI_MPU_EBI1     (32 + 8)
+#define INT_AD_HSSD          (32 + 9)
+#define INT_ARM11_PMU        (32 + 10)
+#define INT_ARM11_DMA        (32 + 11)
+#define INT_TSIF_IRQ         (32 + 12)
+#define INT_UART1DM_IRQ      (32 + 13)
+#define INT_UART1DM_RX       (32 + 14)
+#define INT_USB_HS           (32 + 15)
+#define INT_SDC3_0           (32 + 16)
+#define INT_SDC3_1           (32 + 17)
+#define INT_SDC4_0           (32 + 18)
+#define INT_SDC4_1           (32 + 19)
+#define INT_UART2DM_RX       (32 + 20)
+#define INT_UART2DM_IRQ      (32 + 21)
+
+/* 22-31 are reserved */
+
+#define NR_MSM_IRQS 64
+#define NR_GPIO_IRQS 122
+#define NR_BOARD_IRQS 64
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/irqs-7x30.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/irqs-7x30.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/irqs-7x30.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/irqs-7x30.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,170 @@
+/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_7X30_H
+#define __ASM_ARCH_MSM_IRQS_7X30_H
+
+/* MSM ACPU Interrupt Numbers */
+
+#define INT_DEBUG_TIMER_EXP	0
+#define INT_GPT0_TIMER_EXP	1
+#define INT_GPT1_TIMER_EXP	2
+#define INT_WDT0_ACCSCSSBARK	3
+#define INT_WDT1_ACCSCSSBARK	4
+#define INT_AVS_SVIC		5
+#define INT_AVS_SVIC_SW_DONE	6
+#define INT_SC_DBG_RX_FULL	7
+#define INT_SC_DBG_TX_EMPTY	8
+#define INT_ARM11_PM		9
+#define INT_AVS_REQ_DOWN	10
+#define INT_AVS_REQ_UP		11
+#define INT_SC_ACG		12
+/* SCSS_VICFIQSTS0[13:15] are RESERVED */
+#define INT_L2_SVICCPUIRPTREQ	16
+#define INT_L2_SVICDMANSIRPTREQ 17
+#define INT_L2_SVICDMASIRPTREQ  18
+#define INT_L2_SVICSLVIRPTREQ	19
+#define INT_AD5A_MPROC_APPS_0	20
+#define INT_AD5A_MPROC_APPS_1	21
+#define INT_A9_M2A_0		22
+#define INT_A9_M2A_1		23
+#define INT_A9_M2A_2		24
+#define INT_A9_M2A_3		25
+#define INT_A9_M2A_4		26
+#define INT_A9_M2A_5		27
+#define INT_A9_M2A_6		28
+#define INT_A9_M2A_7		29
+#define INT_A9_M2A_8		30
+#define INT_A9_M2A_9		31
+
+#define INT_AXI_EBI1_SC		(32 + 0)
+#define INT_IMEM_ERR		(32 + 1)
+#define INT_AXI_EBI0_SC		(32 + 2)
+#define INT_PBUS_SC_IRQC	(32 + 3)
+#define INT_PERPH_BUS_BPM	(32 + 4)
+#define INT_CC_TEMP_SENSE	(32 + 5)
+#define INT_UXMC_EBI0		(32 + 6)
+#define INT_UXMC_EBI1		(32 + 7)
+#define INT_EBI2_OP_DONE	(32 + 8)
+#define INT_EBI2_WR_ER_DONE	(32 + 9)
+#define INT_TCSR_SPSS_CE	(32 + 10)
+#define INT_EMDH		(32 + 11)
+#define INT_PMDH		(32 + 12)
+#define INT_MDC			(32 + 13)
+#define INT_MIDI_TO_SUPSS	(32 + 14)
+#define INT_LPA_2		(32 + 15)
+#define INT_GPIO_GROUP1_SECURE	(32 + 16)
+#define INT_GPIO_GROUP2_SECURE	(32 + 17)
+#define INT_GPIO_GROUP1		(32 + 18)
+#define INT_GPIO_GROUP2		(32 + 19)
+#define INT_MPRPH_SOFTRESET	(32 + 20)
+#define INT_PWB_I2C		(32 + 21)
+#define INT_PWB_I2C_2		(32 + 22)
+#define INT_TSSC_SAMPLE		(32 + 23)
+#define INT_TSSC_PENUP		(32 + 24)
+#define INT_TCHSCRN_SSBI	(32 + 25)
+#define INT_FM_RDS		(32 + 26)
+#define INT_KEYSENSE 		(32 + 27)
+#define INT_USB_OTG_HS		(32 + 28)
+#define INT_USB_OTG_HS2		(32 + 29)
+#define INT_USB_OTG_HS3		(32 + 30)
+#define INT_CSI			(32 + 31)
+
+#define INT_SPI_OUTPUT		(64 + 0)
+#define INT_SPI_INPUT		(64 + 1)
+#define INT_SPI_ERROR		(64 + 2)
+#define INT_UART1		(64 + 3)
+#define INT_UART1_RX		(64 + 4)
+#define INT_UART2		(64 + 5)
+#define INT_UART2_RX		(64 + 6)
+#define INT_UART3		(64 + 7)
+#define INT_UART3_RX		(64 + 8)
+#define INT_UART1DM_IRQ		(64 + 9)
+#define INT_UART1DM_RX		(64 + 10)
+#define INT_UART2DM_IRQ		(64 + 11)
+#define INT_UART2DM_RX		(64 + 12)
+#define INT_TSIF		(64 + 13)
+#define INT_ADM_SC1		(64 + 14)
+#define INT_ADM_SC2		(64 + 15)
+#define INT_MDP			(64 + 16)
+#define INT_VPE			(64 + 17)
+#define INT_GRP_2D		(64 + 18)
+#define INT_GRP_3D		(64 + 19)
+#define INT_ROTATOR		(64 + 20)
+#define INT_MFC720		(64 + 21)
+#define INT_JPEG		(64 + 22)
+#define INT_VFE			(64 + 23)
+#define INT_TV_ENC		(64 + 24)
+#define INT_PMIC_SSBI		(64 + 25)
+#define INT_MPM_1		(64 + 26)
+#define INT_TCSR_SPSS_SAMPLE	(64 + 27)
+#define INT_TCSR_SPSS_PENUP	(64 + 28)
+#define INT_MPM_2		(64 + 29)
+#define INT_SDC1_0		(64 + 30)
+#define INT_SDC1_1		(64 + 31)
+
+#define INT_SDC3_0		(96 + 0)
+#define INT_SDC3_1		(96 + 1)
+#define INT_SDC2_0		(96 + 2)
+#define INT_SDC2_1		(96 + 3)
+#define INT_SDC4_0		(96 + 4)
+#define INT_SDC4_1		(96 + 5)
+#define INT_PWB_QUP_IN		(96 + 6)
+#define INT_PWB_QUP_OUT		(96 + 7)
+#define INT_PWB_QUP_ERR		(96 + 8)
+#define INT_SCSS_WDT0_BITE	(96 + 9)
+/* SCSS_VICFIQSTS3[10:31] are RESERVED */
+
+/* Retrofit universal macro names */
+#define INT_ADM_AARM		INT_ADM_SC2
+#define INT_USB_HS   		INT_USB_OTG_HS
+#define INT_USB_OTG   		INT_USB_OTG_HS
+#define INT_TCHSCRN1 		INT_TSSC_SAMPLE
+#define INT_TCHSCRN2 		INT_TSSC_PENUP
+#define INT_GP_TIMER_EXP 	INT_GPT0_TIMER_EXP
+#define INT_ADSP_A11 		INT_AD5A_MPROC_APPS_0
+#define INT_ADSP_A9_A11 	INT_AD5A_MPROC_APPS_1
+#define INT_MDDI_EXT		INT_EMDH
+#define INT_MDDI_PRI		INT_PMDH
+#define INT_MDDI_CLIENT		INT_MDC
+#define INT_NAND_WR_ER_DONE	INT_EBI2_WR_ER_DONE
+#define INT_NAND_OP_DONE	INT_EBI2_OP_DONE
+
+#define NR_MSM_IRQS		128
+#define NR_GPIO_IRQS		182
+#define PMIC8058_IRQ_BASE	(NR_MSM_IRQS + NR_GPIO_IRQS)
+#define NR_PMIC8058_GPIO_IRQS	40
+#define NR_PMIC8058_MPP_IRQS	12
+#define NR_PMIC8058_MISC_IRQS	8
+#define NR_PMIC8058_IRQS	(NR_PMIC8058_GPIO_IRQS +\
+				NR_PMIC8058_MPP_IRQS +\
+				NR_PMIC8058_MISC_IRQS)
+#define NR_BOARD_IRQS		NR_PMIC8058_IRQS
+
+#endif /* __ASM_ARCH_MSM_IRQS_7X30_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/irqs-8x50.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/irqs-8x50.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/irqs-8x50.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/irqs-8x50.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,105 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_8XXX_H
+#define __ASM_ARCH_MSM_IRQS_8XXX_H
+
+/* MSM ACPU Interrupt Numbers */
+
+#define INT_A9_M2A_0         0
+#define INT_A9_M2A_1         1
+#define INT_A9_M2A_2         2
+#define INT_A9_M2A_3         3
+#define INT_A9_M2A_4         4
+#define INT_A9_M2A_5         5
+#define INT_A9_M2A_6         6
+#define INT_GP_TIMER_EXP     7
+#define INT_DEBUG_TIMER_EXP  8
+#define INT_SIRC_0           9
+#define INT_SDC3_0           10
+#define INT_SDC3_1           11
+#define INT_SDC4_0           12
+#define INT_SDC4_1           13
+#define INT_AD6_EXT_VFR      14
+#define INT_USB_OTG          15
+#define INT_MDDI_PRI         16
+#define INT_MDDI_EXT         17
+#define INT_MDDI_CLIENT      18
+#define INT_MDP              19
+#define INT_GRAPHICS         20
+#define INT_ADM_AARM         21
+#define INT_ADSP_A11         22
+#define INT_ADSP_A9_A11      23
+#define INT_SDC1_0           24
+#define INT_SDC1_1           25
+#define INT_SDC2_0           26
+#define INT_SDC2_1           27
+#define INT_KEYSENSE         28
+#define INT_TCHSCRN_SSBI     29
+#define INT_TCHSCRN1         30
+#define INT_TCHSCRN2         31
+
+#define INT_TCSR_MPRPH_SC1   (32 + 0)
+#define INT_USB_FS2          (32 + 1)
+#define INT_PWB_I2C          (32 + 2)
+#define INT_SOFTRESET        (32 + 3)
+#define INT_NAND_WR_ER_DONE  (32 + 4)
+#define INT_NAND_OP_DONE     (32 + 5)
+#define INT_TCSR_MPRPH_SC2   (32 + 6)
+#define INT_OP_PEN           (32 + 7)
+#define INT_AD_HSSD          (32 + 8)
+#define INT_ARM11_PM         (32 + 9)
+#define INT_SDMA_NON_SECURE  (32 + 10)
+#define INT_TSIF_IRQ         (32 + 11)
+#define INT_UART1DM_IRQ      (32 + 12)
+#define INT_UART1DM_RX       (32 + 13)
+#define INT_SDMA_SECURE      (32 + 14)
+#define INT_SI2S_SLAVE       (32 + 15)
+#define INT_SC_I2CPU         (32 + 16)
+#define INT_SC_DBG_RDTRFULL  (32 + 17)
+#define INT_SC_DBG_WDTRFULL  (32 + 18)
+#define INT_SCPLL_CTL_DONE   (32 + 19)
+#define INT_UART2DM_IRQ      (32 + 20)
+#define INT_UART2DM_RX       (32 + 21)
+#define INT_VDC_MEC          (32 + 22)
+#define INT_VDC_DB           (32 + 23)
+#define INT_VDC_AXI          (32 + 24)
+#define INT_VFE              (32 + 25)
+#define INT_USB_HS           (32 + 26)
+#define INT_AUDIO_OUT0       (32 + 27)
+#define INT_AUDIO_OUT1       (32 + 28)
+#define INT_CRYPTO           (32 + 29)
+#define INT_AD6M_IDLE        (32 + 30)
+#define INT_SIRC_1           (32 + 31)
+
+#define NR_GPIO_IRQS 165
+#define NR_MSM_IRQS 64
+#define NR_BOARD_IRQS 64
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,6 +1,6 @@
-/* arch/arm/mach-msm/include/mach/irqs.h
- *
+/*
  * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
  * Author: Brian Swetland <swetland@google.com>
  *
  * This software is licensed under the terms of the GNU General Public
@@ -17,74 +17,21 @@
 #ifndef __ASM_ARCH_MSM_IRQS_H
 #define __ASM_ARCH_MSM_IRQS_H
 
-/* MSM ARM11 Interrupt Numbers */
-/* See 80-VE113-1 A, pp219-221     */
-
-#define INT_A9_M2A_0         0
-#define INT_A9_M2A_1         1
-#define INT_A9_M2A_2         2
-#define INT_A9_M2A_3         3
-#define INT_A9_M2A_4         4
-#define INT_A9_M2A_5         5
-#define INT_A9_M2A_6         6
-#define INT_GP_TIMER_EXP     7
-#define INT_DEBUG_TIMER_EXP  8
-#define INT_UART1            9
-#define INT_UART2            10
-#define INT_UART3            11
-#define INT_UART1_RX         12
-#define INT_UART2_RX         13
-#define INT_UART3_RX         14
-#define INT_USB_OTG          15
-#define INT_MDDI_PRI         16
-#define INT_MDDI_EXT         17
-#define INT_MDDI_CLIENT      18
-#define INT_MDP              19
-#define INT_GRAPHICS         20
-#define INT_ADM_AARM         21
-#define INT_ADSP_A11         22
-#define INT_ADSP_A9_A11      23
-#define INT_SDC1_0           24
-#define INT_SDC1_1           25
-#define INT_SDC2_0           26
-#define INT_SDC2_1           27
-#define INT_KEYSENSE         28
-#define INT_TCHSCRN_SSBI     29
-#define INT_TCHSCRN1         30
-#define INT_TCHSCRN2         31
-
-#define INT_GPIO_GROUP1      (32 + 0)
-#define INT_GPIO_GROUP2      (32 + 1)
-#define INT_PWB_I2C          (32 + 2)
-#define INT_SOFTRESET        (32 + 3)
-#define INT_NAND_WR_ER_DONE  (32 + 4)
-#define INT_NAND_OP_DONE     (32 + 5)
-#define INT_PBUS_ARM11       (32 + 6)
-#define INT_AXI_MPU_SMI      (32 + 7)
-#define INT_AXI_MPU_EBI1     (32 + 8)
-#define INT_AD_HSSD          (32 + 9)
-#define INT_ARM11_PMU        (32 + 10)
-#define INT_ARM11_DMA        (32 + 11)
-#define INT_TSIF_IRQ         (32 + 12)
-#define INT_UART1DM_IRQ      (32 + 13)
-#define INT_UART1DM_RX       (32 + 14)
-#define INT_USB_HS           (32 + 15)
-#define INT_SDC3_0           (32 + 16)
-#define INT_SDC3_1           (32 + 17)
-#define INT_SDC4_0           (32 + 18)
-#define INT_SDC4_1           (32 + 19)
-#define INT_UART2DM_RX       (32 + 20)
-#define INT_UART2DM_IRQ      (32 + 21)
-
-/* 22-31 are reserved */
-
 #define MSM_IRQ_BIT(irq)     (1 << ((irq) & 31))
 
-#define NR_MSM_IRQS 64
-#define NR_GPIO_IRQS 122
-#define NR_BOARD_IRQS 64
-#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
+#if defined(CONFIG_ARCH_MSM7X30)
+#include "irqs-7x30.h"
+#elif defined(CONFIG_ARCH_QSD8X50)
+#include "irqs-8x50.h"
+#include "sirc.h"
+#elif defined(CONFIG_ARCH_MSM_ARM11)
+#include "irqs-7x00.h"
+#else
+#error "Unknown architecture specification"
+#endif
 
+#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
 #define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
+#define MSM_INT_TO_REG(base, irq) (base + irq / 32)
 
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/memory.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/memory.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/memory.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/memory.h	2010-08-01 18:11:14.000000000 -0400
@@ -17,7 +17,15 @@
 #define __ASM_ARCH_MEMORY_H
 
 /* physical offset of RAM */
+#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A)
+#define PHYS_OFFSET		UL(0x00000000)
+#elif defined(CONFIG_ARCH_QSD8X50)
+#define PHYS_OFFSET		UL(0x20000000)
+#elif defined(CONFIG_ARCH_MSM7X30)
+#define PHYS_OFFSET		UL(0x00200000)
+#else
 #define PHYS_OFFSET		UL(0x10000000)
+#endif
 
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/msm_fb.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/msm_fb.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/msm_fb.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/msm_fb.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,147 @@
+/* arch/arm/mach-msm/include/mach/msm_fb.h
+ *
+ * Internal shared definitions for various MSM framebuffer parts.
+ *
+ * Copyright (C) 2007 Google Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MSM_FB_H_
+#define _MSM_FB_H_
+
+#include <linux/device.h>
+
+struct mddi_info;
+
+struct msm_fb_data {
+	int xres;	/* x resolution in pixels */
+	int yres;	/* y resolution in pixels */
+	int width;	/* disply width in mm */
+	int height;	/* display height in mm */
+	unsigned output_format;
+};
+
+struct msmfb_callback {
+	void (*func)(struct msmfb_callback *);
+};
+
+enum {
+	MSM_MDDI_PMDH_INTERFACE,
+	MSM_MDDI_EMDH_INTERFACE,
+	MSM_EBI2_INTERFACE,
+};
+
+#define MSMFB_CAP_PARTIAL_UPDATES	(1 << 0)
+
+struct msm_panel_data {
+	/* turns off the fb memory */
+	int (*suspend)(struct msm_panel_data *);
+	/* turns on the fb memory */
+	int (*resume)(struct msm_panel_data *);
+	/* turns off the panel */
+	int (*blank)(struct msm_panel_data *);
+	/* turns on the panel */
+	int (*unblank)(struct msm_panel_data *);
+	void (*wait_vsync)(struct msm_panel_data *);
+	void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *);
+	void (*clear_vsync)(struct msm_panel_data *);
+	/* from the enum above */
+	unsigned interface_type;
+	/* data to be passed to the fb driver */
+	struct msm_fb_data *fb_data;
+
+	/* capabilities supported by the panel */
+	uint32_t caps;
+};
+
+struct msm_mddi_client_data {
+	void (*suspend)(struct msm_mddi_client_data *);
+	void (*resume)(struct msm_mddi_client_data *);
+	void (*activate_link)(struct msm_mddi_client_data *);
+	void (*remote_write)(struct msm_mddi_client_data *, uint32_t val,
+			     uint32_t reg);
+	uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg);
+	void (*auto_hibernate)(struct msm_mddi_client_data *, int);
+	/* custom data that needs to be passed from the board file to a 
+	 * particular client */
+	void *private_client_data;
+	struct resource *fb_resource;
+	/* from the list above */
+	unsigned interface_type;
+};
+
+struct msm_mddi_platform_data {
+	unsigned int clk_rate;
+	void (*power_client)(struct msm_mddi_client_data *, int on);
+
+	/* fixup the mfr name, product id */
+	void (*fixup)(uint16_t *mfr_name, uint16_t *product_id);
+
+	struct resource *fb_resource; /*optional*/
+	/* number of clients in the list that follows */
+	int num_clients;
+	/* array of client information of clients */
+	struct {
+		unsigned product_id; /* mfr id in top 16 bits, product id
+				      * in lower 16 bits
+				      */
+		char *name;	/* the device name will be the platform
+				 * device name registered for the client,
+				 * it should match the name of the associated
+				 * driver
+				 */
+		unsigned id;	/* id for mddi client device node, will also
+				 * be used as device id of panel devices, if
+				 * the client device will have multiple panels
+				 * space must be left here for them
+				 */
+		void *client_data;	/* required private client data */
+		unsigned int clk_rate;	/* optional: if the client requires a
+					* different mddi clk rate
+					*/
+	} client_platform_data[];
+};
+
+struct mdp_blit_req;
+struct fb_info;
+struct mdp_device {
+	struct device dev;
+	void (*dma)(struct mdp_device *mpd, uint32_t addr,
+		    uint32_t stride, uint32_t w, uint32_t h, uint32_t x,
+		    uint32_t y, struct msmfb_callback *callback, int interface);
+	void (*dma_wait)(struct mdp_device *mdp);
+	int (*blit)(struct mdp_device *mdp, struct fb_info *fb,
+		    struct mdp_blit_req *req);
+	void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id);
+};
+
+struct class_interface;
+int register_mdp_client(struct class_interface *class_intf);
+
+/**** private client data structs go below this line ***/
+
+struct msm_mddi_bridge_platform_data {
+	/* from board file */
+	int (*init)(struct msm_mddi_bridge_platform_data *,
+		    struct msm_mddi_client_data *);
+	int (*uninit)(struct msm_mddi_bridge_platform_data *,
+		      struct msm_mddi_client_data *);
+	/* passed to panel for use by the fb driver */
+	int (*blank)(struct msm_mddi_bridge_platform_data *,
+		     struct msm_mddi_client_data *);
+	int (*unblank)(struct msm_mddi_bridge_platform_data *,
+		       struct msm_mddi_client_data *);
+	struct msm_fb_data fb_data;
+};
+
+
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,139 @@
+/* arch/arm/mach-msm/include/mach/msm_iomap.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough.  Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_7X00_H
+#define __ASM_ARCH_MSM_IOMAP_7X00_H
+
+#include <asm/sizes.h>
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#ifdef __ASSEMBLY__
+#define IOMEM(x)	x
+#else
+#define IOMEM(x)	((void __force __iomem *)(x))
+#endif
+
+#define MSM_VIC_BASE          IOMEM(0xE0000000)
+#define MSM_VIC_PHYS          0xC0000000
+#define MSM_VIC_SIZE          SZ_4K
+
+#define MSM_CSR_BASE          IOMEM(0xE0001000)
+#define MSM_CSR_PHYS          0xC0100000
+#define MSM_CSR_SIZE          SZ_4K
+
+#define MSM_GPT_PHYS          MSM_CSR_PHYS
+#define MSM_GPT_BASE          MSM_CSR_BASE
+#define MSM_GPT_SIZE          SZ_4K
+
+#define MSM_DMOV_BASE         IOMEM(0xE0002000)
+#define MSM_DMOV_PHYS         0xA9700000
+#define MSM_DMOV_SIZE         SZ_4K
+
+#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
+#define MSM_GPIO1_PHYS        0xA9200000
+#define MSM_GPIO1_SIZE        SZ_4K
+
+#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
+#define MSM_GPIO2_PHYS        0xA9300000
+#define MSM_GPIO2_SIZE        SZ_4K
+
+#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
+#define MSM_CLK_CTL_PHYS      0xA8600000
+#define MSM_CLK_CTL_SIZE      SZ_4K
+
+#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
+#define MSM_SHARED_RAM_PHYS   0x01F00000
+#define MSM_SHARED_RAM_SIZE   SZ_1M
+
+#define MSM_UART1_PHYS        0xA9A00000
+#define MSM_UART1_SIZE        SZ_4K
+
+#define MSM_UART2_PHYS        0xA9B00000
+#define MSM_UART2_SIZE        SZ_4K
+
+#define MSM_UART3_PHYS        0xA9C00000
+#define MSM_UART3_SIZE        SZ_4K
+
+#ifdef CONFIG_MSM_DEBUG_UART
+#define MSM_DEBUG_UART_BASE   0xE1000000
+#if CONFIG_MSM_DEBUG_UART == 1
+#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 2
+#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 3
+#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
+#endif
+#define MSM_DEBUG_UART_SIZE   SZ_4K
+#endif
+
+#define MSM_SDC1_PHYS         0xA0400000
+#define MSM_SDC1_SIZE         SZ_4K
+
+#define MSM_SDC2_PHYS         0xA0500000
+#define MSM_SDC2_SIZE         SZ_4K
+
+#define MSM_SDC3_PHYS         0xA0600000
+#define MSM_SDC3_SIZE         SZ_4K
+
+#define MSM_SDC4_PHYS         0xA0700000
+#define MSM_SDC4_SIZE         SZ_4K
+
+#define MSM_I2C_PHYS          0xA9900000
+#define MSM_I2C_SIZE          SZ_4K
+
+#define MSM_HSUSB_PHYS        0xA0800000
+#define MSM_HSUSB_SIZE        SZ_4K
+
+#define MSM_PMDH_PHYS         0xAA600000
+#define MSM_PMDH_SIZE         SZ_4K
+
+#define MSM_EMDH_PHYS         0xAA700000
+#define MSM_EMDH_SIZE         SZ_4K
+
+#define MSM_MDP_PHYS          0xAA200000
+#define MSM_MDP_SIZE          0x000F0000
+
+#define MSM_MDC_PHYS	      0xAA500000
+#define MSM_MDC_SIZE	      SZ_1M
+
+#define MSM_AD5_PHYS          0xAC000000
+#define MSM_AD5_SIZE          (SZ_1M*13)
+
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define MSM_GCC_BASE          IOMEM(0xF8009000)
+#define MSM_GCC_PHYS          0xC0182000
+#define MSM_GCC_SIZE          SZ_4K
+#endif
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough.  Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_7X30_H
+#define __ASM_ARCH_MSM_IOMAP_7X30_H
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_VIC_BASE          IOMEM(0xE0000000)
+#define MSM_VIC_PHYS          0xC0080000
+#define MSM_VIC_SIZE          SZ_4K
+
+#define MSM_CSR_BASE          IOMEM(0xE0001000)
+#define MSM_CSR_PHYS          0xC0100000
+#define MSM_CSR_SIZE          SZ_4K
+
+#define MSM_TMR_PHYS          MSM_CSR_PHYS
+#define MSM_TMR_BASE          MSM_CSR_BASE
+#define MSM_TMR_SIZE          SZ_4K
+
+#define MSM_GPT_BASE 	      (MSM_TMR_BASE + 0x4)
+#define MSM_DGT_BASE 	      (MSM_TMR_BASE + 0x24)
+
+#define MSM_DMOV_BASE         IOMEM(0xE0002000)
+#define MSM_DMOV_PHYS         0xAC400000
+#define MSM_DMOV_SIZE         SZ_4K
+
+#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
+#define MSM_GPIO1_PHYS        0xAC001000
+#define MSM_GPIO1_SIZE        SZ_4K
+
+#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
+#define MSM_GPIO2_PHYS        0xAC101000
+#define MSM_GPIO2_SIZE        SZ_4K
+
+#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
+#define MSM_CLK_CTL_PHYS      0xAB800000
+#define MSM_CLK_CTL_SIZE      SZ_4K
+
+#define MSM_CLK_CTL_SH2_BASE  IOMEM(0xE0006000)
+#define MSM_CLK_CTL_SH2_PHYS  0xABA01000
+#define MSM_CLK_CTL_SH2_SIZE  SZ_4K
+
+#define MSM_ACC_BASE          IOMEM(0xE0007000)
+#define MSM_ACC_PHYS          0xC0101000
+#define MSM_ACC_SIZE          SZ_4K
+
+#define MSM_SAW_BASE          IOMEM(0xE0008000)
+#define MSM_SAW_PHYS          0xC0102000
+#define MSM_SAW_SIZE          SZ_4K
+
+#define MSM_GCC_BASE	      IOMEM(0xE0009000)
+#define MSM_GCC_PHYS	      0xC0182000
+#define MSM_GCC_SIZE	      SZ_4K
+
+#define MSM_TCSR_BASE	      IOMEM(0xE000A000)
+#define MSM_TCSR_PHYS	      0xAB600000
+#define MSM_TCSR_SIZE	      SZ_4K
+
+#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
+#define MSM_SHARED_RAM_PHYS   0x00100000
+#define MSM_SHARED_RAM_SIZE   SZ_1M
+
+#define MSM_UART1_PHYS        0xACA00000
+#define MSM_UART1_SIZE        SZ_4K
+
+#define MSM_UART2_PHYS        0xACB00000
+#define MSM_UART2_SIZE        SZ_4K
+
+#define MSM_UART3_PHYS        0xACC00000
+#define MSM_UART3_SIZE        SZ_4K
+
+#ifdef CONFIG_MSM_DEBUG_UART
+#define MSM_DEBUG_UART_BASE   0xE1000000
+#if CONFIG_MSM_DEBUG_UART == 1
+#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 2
+#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 3
+#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
+#endif
+#define MSM_DEBUG_UART_SIZE   SZ_4K
+#endif
+
+#define MSM_MDC_BASE	      IOMEM(0xE0200000)
+#define MSM_MDC_PHYS	      0xAA500000
+#define MSM_MDC_SIZE	      SZ_1M
+
+#define MSM_AD5_BASE          IOMEM(0xE0300000)
+#define MSM_AD5_PHYS          0xA7000000
+#define MSM_AD5_SIZE          (SZ_1M*13)
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough.  Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_8X50_H
+#define __ASM_ARCH_MSM_IOMAP_8X50_H
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_VIC_BASE          IOMEM(0xE0000000)
+#define MSM_VIC_PHYS          0xAC000000
+#define MSM_VIC_SIZE          SZ_4K
+
+#define MSM_CSR_BASE          IOMEM(0xE0001000)
+#define MSM_CSR_PHYS          0xAC100000
+#define MSM_CSR_SIZE          SZ_4K
+
+#define MSM_TMR_PHYS          MSM_CSR_PHYS
+#define MSM_TMR_BASE          MSM_CSR_BASE
+#define MSM_TMR_SIZE          SZ_4K
+
+#define MSM_GPT_BASE          MSM_TMR_BASE
+#define MSM_DGT_BASE          (MSM_TMR_BASE + 0x10)
+
+#define MSM_DMOV_BASE         IOMEM(0xE0002000)
+#define MSM_DMOV_PHYS         0xA9700000
+#define MSM_DMOV_SIZE         SZ_4K
+
+#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
+#define MSM_GPIO1_PHYS        0xA9000000
+#define MSM_GPIO1_SIZE        SZ_4K
+
+#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
+#define MSM_GPIO2_PHYS        0xA9100000
+#define MSM_GPIO2_SIZE        SZ_4K
+
+#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
+#define MSM_CLK_CTL_PHYS      0xA8600000
+#define MSM_CLK_CTL_SIZE      SZ_4K
+
+#define MSM_SIRC_BASE         IOMEM(0xE1006000)
+#define MSM_SIRC_PHYS         0xAC200000
+#define MSM_SIRC_SIZE         SZ_4K
+
+#define MSM_SCPLL_BASE        IOMEM(0xE1007000)
+#define MSM_SCPLL_PHYS        0xA8800000
+#define MSM_SCPLL_SIZE        SZ_4K
+
+#ifdef CONFIG_MSM_SOC_REV_A
+#define MSM_SMI_BASE 0xE0000000
+#else
+#define MSM_SMI_BASE 0x00000000
+#endif
+
+#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
+#define MSM_SHARED_RAM_PHYS (MSM_SMI_BASE + 0x00100000)
+#define MSM_SHARED_RAM_SIZE   SZ_1M
+
+#define MSM_UART1_PHYS        0xA9A00000
+#define MSM_UART1_SIZE        SZ_4K
+
+#define MSM_UART2_PHYS        0xA9B00000
+#define MSM_UART2_SIZE        SZ_4K
+
+#define MSM_UART3_PHYS        0xA9C00000
+#define MSM_UART3_SIZE        SZ_4K
+
+#ifdef CONFIG_MSM_DEBUG_UART
+#define MSM_DEBUG_UART_BASE   0xE1000000
+#if CONFIG_MSM_DEBUG_UART == 1
+#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 2
+#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 3
+#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
+#endif
+#define MSM_DEBUG_UART_SIZE   SZ_4K
+#endif
+
+#define MSM_MDC_BASE	      IOMEM(0xE0200000)
+#define MSM_MDC_PHYS	      0xAA500000
+#define MSM_MDC_SIZE	      SZ_1M
+
+#define MSM_AD5_BASE          IOMEM(0xE0300000)
+#define MSM_AD5_PHYS          0xAC000000
+#define MSM_AD5_SIZE          (SZ_1M*13)
+
+
+#define MSM_I2C_SIZE          SZ_4K
+#define MSM_I2C_PHYS          0xA9900000
+
+#define MSM_HSUSB_PHYS        0xA0800000
+#define MSM_HSUSB_SIZE        SZ_1K
+
+#define MSM_NAND_PHYS           0xA0A00000
+
+
+#define MSM_TSIF_PHYS        (0xa0100000)
+#define MSM_TSIF_SIZE        (0x200)
+
+#define MSM_TSSC_PHYS         0xAA300000
+
+#define MSM_UART1DM_PHYS      0xA0200000
+#define MSM_UART2DM_PHYS      0xA0900000
+
+
+#define MSM_SDC1_PHYS          0xA0400000
+#define MSM_SDC1_SIZE          SZ_4K
+
+#define MSM_SDC2_PHYS          0xA0500000
+#define MSM_SDC2_SIZE          SZ_4K
+
+#define MSM_SDC3_PHYS          0xA0600000
+#define MSM_SDC3_SIZE           SZ_4K
+
+#define MSM_SDC4_PHYS          0xA0700000
+#define MSM_SDC4_SIZE          SZ_4K
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/msm_iomap.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/msm_iomap.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/msm_iomap.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/msm_iomap.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,6 +1,6 @@
-/* arch/arm/mach-msm/include/mach/msm_iomap.h
- *
+/*
  * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
  * Author: Brian Swetland <swetland@google.com>
  *
  * This software is licensed under the terms of the GNU General Public
@@ -43,91 +43,12 @@
 #define IOMEM(x)	((void __force __iomem *)(x))
 #endif
 
-#define MSM_VIC_BASE          IOMEM(0xE0000000)
-#define MSM_VIC_PHYS          0xC0000000
-#define MSM_VIC_SIZE          SZ_4K
-
-#define MSM_CSR_BASE          IOMEM(0xE0001000)
-#define MSM_CSR_PHYS          0xC0100000
-#define MSM_CSR_SIZE          SZ_4K
-
-#define MSM_GPT_PHYS          MSM_CSR_PHYS
-#define MSM_GPT_BASE          MSM_CSR_BASE
-#define MSM_GPT_SIZE          SZ_4K
-
-#define MSM_DMOV_BASE         IOMEM(0xE0002000)
-#define MSM_DMOV_PHYS         0xA9700000
-#define MSM_DMOV_SIZE         SZ_4K
-
-#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
-#define MSM_GPIO1_PHYS        0xA9200000
-#define MSM_GPIO1_SIZE        SZ_4K
-
-#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
-#define MSM_GPIO2_PHYS        0xA9300000
-#define MSM_GPIO2_SIZE        SZ_4K
-
-#define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
-#define MSM_CLK_CTL_PHYS      0xA8600000
-#define MSM_CLK_CTL_SIZE      SZ_4K
-
-#define MSM_SHARED_RAM_BASE   IOMEM(0xE0100000)
-#define MSM_SHARED_RAM_PHYS   0x01F00000
-#define MSM_SHARED_RAM_SIZE   SZ_1M
-
-#define MSM_UART1_PHYS        0xA9A00000
-#define MSM_UART1_SIZE        SZ_4K
-
-#define MSM_UART2_PHYS        0xA9B00000
-#define MSM_UART2_SIZE        SZ_4K
-
-#define MSM_UART3_PHYS        0xA9C00000
-#define MSM_UART3_SIZE        SZ_4K
-
-#ifdef CONFIG_MSM_DEBUG_UART
-#define MSM_DEBUG_UART_BASE   0xE1000000
-#if CONFIG_MSM_DEBUG_UART == 1
-#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 2
-#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
-#elif CONFIG_MSM_DEBUG_UART == 3
-#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
-#endif
-#define MSM_DEBUG_UART_SIZE   SZ_4K
+#if defined(CONFIG_ARCH_MSM7X30)
+#include "msm_iomap-7x30.h"
+#elif defined(CONFIG_ARCH_QSD8X50)
+#include "msm_iomap-8x50.h"
+#else
+#include "msm_iomap-7x00.h"
 #endif
 
-#define MSM_SDC1_PHYS         0xA0400000
-#define MSM_SDC1_SIZE         SZ_4K
-
-#define MSM_SDC2_PHYS         0xA0500000
-#define MSM_SDC2_SIZE         SZ_4K
-
-#define MSM_SDC3_PHYS         0xA0600000
-#define MSM_SDC3_SIZE         SZ_4K
-
-#define MSM_SDC4_PHYS         0xA0700000
-#define MSM_SDC4_SIZE         SZ_4K
-
-#define MSM_I2C_PHYS          0xA9900000
-#define MSM_I2C_SIZE          SZ_4K
-
-#define MSM_HSUSB_PHYS        0xA0800000
-#define MSM_HSUSB_SIZE        SZ_4K
-
-#define MSM_PMDH_PHYS         0xAA600000
-#define MSM_PMDH_SIZE         SZ_4K
-
-#define MSM_EMDH_PHYS         0xAA700000
-#define MSM_EMDH_SIZE         SZ_4K
-
-#define MSM_MDP_PHYS          0xAA200000
-#define MSM_MDP_SIZE          0x000F0000
-
-#define MSM_MDC_PHYS	      0xAA500000
-#define MSM_MDC_SIZE	      SZ_1M
-
-#define MSM_AD5_PHYS          0xAC000000
-#define MSM_AD5_SIZE          (SZ_1M*13)
-
-
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/msm_smd.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/msm_smd.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/msm_smd.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/msm_smd.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,109 @@
+/* linux/include/asm-arm/arch-msm/msm_smd.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_SMD_H
+#define __ASM_ARCH_MSM_SMD_H
+
+typedef struct smd_channel smd_channel_t;
+
+extern int (*msm_check_for_modem_crash)(void);
+
+/* warning: notify() may be called before open returns */
+int smd_open(const char *name, smd_channel_t **ch, void *priv,
+	     void (*notify)(void *priv, unsigned event));
+
+#define SMD_EVENT_DATA 1
+#define SMD_EVENT_OPEN 2
+#define SMD_EVENT_CLOSE 3
+
+int smd_close(smd_channel_t *ch);
+
+/* passing a null pointer for data reads and discards */
+int smd_read(smd_channel_t *ch, void *data, int len);
+
+/* Write to stream channels may do a partial write and return
+** the length actually written.
+** Write to packet channels will never do a partial write --
+** it will return the requested length written or an error.
+*/
+int smd_write(smd_channel_t *ch, const void *data, int len);
+int smd_write_atomic(smd_channel_t *ch, const void *data, int len);
+
+int smd_write_avail(smd_channel_t *ch);
+int smd_read_avail(smd_channel_t *ch);
+
+/* Returns the total size of the current packet being read.
+** Returns 0 if no packets available or a stream channel.
+*/
+int smd_cur_packet_size(smd_channel_t *ch);
+
+/* used for tty unthrottling and the like -- causes the notify()
+** callback to be called from the same lock context as is used
+** when it is called from channel updates
+*/
+void smd_kick(smd_channel_t *ch);
+
+
+#if 0
+/* these are interruptable waits which will block you until the specified
+** number of bytes are readable or writable.
+*/
+int smd_wait_until_readable(smd_channel_t *ch, int bytes);
+int smd_wait_until_writable(smd_channel_t *ch, int bytes);
+#endif
+
+typedef enum {
+	SMD_PORT_DS = 0,
+	SMD_PORT_DIAG,
+	SMD_PORT_RPC_CALL,
+	SMD_PORT_RPC_REPLY,
+	SMD_PORT_BT,
+	SMD_PORT_CONTROL,
+	SMD_PORT_MEMCPY_SPARE1,
+	SMD_PORT_DATA1,
+	SMD_PORT_DATA2,
+	SMD_PORT_DATA3,
+	SMD_PORT_DATA4,
+	SMD_PORT_DATA5,
+	SMD_PORT_DATA6,
+	SMD_PORT_DATA7,
+	SMD_PORT_DATA8,
+	SMD_PORT_DATA9,
+	SMD_PORT_DATA10,
+	SMD_PORT_DATA11,
+	SMD_PORT_DATA12,
+	SMD_PORT_DATA13,
+	SMD_PORT_DATA14,
+	SMD_PORT_DATA15,
+	SMD_PORT_DATA16,
+	SMD_PORT_DATA17,
+	SMD_PORT_DATA18,
+	SMD_PORT_DATA19,
+	SMD_PORT_DATA20,
+	SMD_PORT_GPS_NMEA,
+	SMD_PORT_BRIDGE_1,
+	SMD_PORT_BRIDGE_2,
+	SMD_PORT_BRIDGE_3,
+	SMD_PORT_BRIDGE_4,
+	SMD_PORT_BRIDGE_5,
+	SMD_PORT_LOOPBACK,
+	SMD_PORT_CS_APPS_MODEM,
+	SMD_PORT_CS_APPS_DSP,
+	SMD_PORT_CS_MODEM_DSP,
+	SMD_NUM_PORTS,
+} smd_port_id_type;
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/sirc.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/sirc.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/sirc.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/sirc.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,115 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above
+ *       copyright notice, this list of conditions and the following
+ *       disclaimer in the documentation and/or other materials provided
+ *       with the distribution.
+ *     * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_SIRC_H
+#define __ASM_ARCH_MSM_SIRC_H
+
+struct sirc_regs_t {
+	void    *int_enable;
+	void    *int_enable_clear;
+	void    *int_enable_set;
+	void    *int_type;
+	void    *int_polarity;
+	void    *int_clear;
+};
+
+struct sirc_cascade_regs {
+	void    *int_status;
+	unsigned int    cascade_irq;
+};
+
+void msm_init_sirc(void);
+void msm_sirc_enter_sleep(void);
+void msm_sirc_exit_sleep(void);
+
+#if defined(CONFIG_ARCH_MSM_SCORPION)
+
+#include <mach/msm_iomap.h>
+
+/*
+ * Secondary interrupt controller interrupts
+ */
+
+#define FIRST_SIRC_IRQ (NR_MSM_IRQS + NR_GPIO_IRQS)
+
+#define INT_UART1                     (FIRST_SIRC_IRQ + 0)
+#define INT_UART2                     (FIRST_SIRC_IRQ + 1)
+#define INT_UART3                     (FIRST_SIRC_IRQ + 2)
+#define INT_UART1_RX                  (FIRST_SIRC_IRQ + 3)
+#define INT_UART2_RX                  (FIRST_SIRC_IRQ + 4)
+#define INT_UART3_RX                  (FIRST_SIRC_IRQ + 5)
+#define INT_SPI_INPUT                 (FIRST_SIRC_IRQ + 6)
+#define INT_SPI_OUTPUT                (FIRST_SIRC_IRQ + 7)
+#define INT_SPI_ERROR                 (FIRST_SIRC_IRQ + 8)
+#define INT_GPIO_GROUP1               (FIRST_SIRC_IRQ + 9)
+#define INT_GPIO_GROUP2               (FIRST_SIRC_IRQ + 10)
+#define INT_GPIO_GROUP1_SECURE        (FIRST_SIRC_IRQ + 11)
+#define INT_GPIO_GROUP2_SECURE        (FIRST_SIRC_IRQ + 12)
+#define INT_AVS_SVIC                  (FIRST_SIRC_IRQ + 13)
+#define INT_AVS_REQ_UP                (FIRST_SIRC_IRQ + 14)
+#define INT_AVS_REQ_DOWN              (FIRST_SIRC_IRQ + 15)
+#define INT_PBUS_ERR                  (FIRST_SIRC_IRQ + 16)
+#define INT_AXI_ERR                   (FIRST_SIRC_IRQ + 17)
+#define INT_SMI_ERR                   (FIRST_SIRC_IRQ + 18)
+#define INT_EBI1_ERR                  (FIRST_SIRC_IRQ + 19)
+#define INT_IMEM_ERR                  (FIRST_SIRC_IRQ + 20)
+#define INT_TEMP_SENSOR               (FIRST_SIRC_IRQ + 21)
+#define INT_TV_ENC                    (FIRST_SIRC_IRQ + 22)
+#define INT_GRP2D                     (FIRST_SIRC_IRQ + 23)
+#define INT_GSBI_QUP                  (FIRST_SIRC_IRQ + 24)
+#define INT_SC_ACG                    (FIRST_SIRC_IRQ + 25)
+#define INT_WDT0                      (FIRST_SIRC_IRQ + 26)
+#define INT_WDT1                      (FIRST_SIRC_IRQ + 27)
+
+#if defined(CONFIG_MSM_SOC_REV_A)
+#define NR_SIRC_IRQS                  28
+#define SIRC_MASK                     0x0FFFFFFF
+#else
+#define NR_SIRC_IRQS                  23
+#define SIRC_MASK                     0x007FFFFF
+#endif
+
+#define LAST_SIRC_IRQ                 (FIRST_SIRC_IRQ + NR_SIRC_IRQS - 1)
+
+#define SPSS_SIRC_INT_SELECT          (MSM_SIRC_BASE + 0x00)
+#define SPSS_SIRC_INT_ENABLE          (MSM_SIRC_BASE + 0x04)
+#define SPSS_SIRC_INT_ENABLE_CLEAR    (MSM_SIRC_BASE + 0x08)
+#define SPSS_SIRC_INT_ENABLE_SET      (MSM_SIRC_BASE + 0x0C)
+#define SPSS_SIRC_INT_TYPE            (MSM_SIRC_BASE + 0x10)
+#define SPSS_SIRC_INT_POLARITY        (MSM_SIRC_BASE + 0x14)
+#define SPSS_SIRC_SECURITY            (MSM_SIRC_BASE + 0x18)
+#define SPSS_SIRC_IRQ_STATUS          (MSM_SIRC_BASE + 0x1C)
+#define SPSS_SIRC_IRQ1_STATUS         (MSM_SIRC_BASE + 0x20)
+#define SPSS_SIRC_RAW_STATUS          (MSM_SIRC_BASE + 0x24)
+#define SPSS_SIRC_INT_CLEAR           (MSM_SIRC_BASE + 0x28)
+#define SPSS_SIRC_SOFT_INT            (MSM_SIRC_BASE + 0x2C)
+
+#endif
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/system.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/system.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/system.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/system.h	2010-08-01 18:11:14.000000000 -0400
@@ -21,3 +21,8 @@
 {
 	for (;;) ;  /* depends on IPC w/ other core */
 }
+
+/* low level hardware reset hook -- for example, hitting the
+ * PSHOLD line on the PMIC to hard reset the system
+ */
+extern void (*msm_hw_reset_hook)(void);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/vreg.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/vreg.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/include/mach/vreg.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/include/mach/vreg.h	2010-08-01 18:11:14.000000000 -0400
@@ -23,7 +23,7 @@
 void vreg_put(struct vreg *vreg);
 
 int vreg_enable(struct vreg *vreg);
-void vreg_disable(struct vreg *vreg);
+int vreg_disable(struct vreg *vreg);
 int vreg_set_level(struct vreg *vreg, unsigned mv);
 
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/io.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/io.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/io.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/io.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,8 +1,9 @@
 /* arch/arm/mach-msm/io.c
  *
- * MSM7K io support
+ * MSM7K, QSD io support
  *
  * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
  * Author: Brian Swetland <swetland@google.com>
  *
  * This software is licensed under the terms of the GNU General Public
@@ -34,6 +35,8 @@
 		.type = MT_DEVICE_NONSHARED, \
 	 }
 
+#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \
+	|| defined(CONFIG_ARCH_MSM7X25)
 static struct map_desc msm_io_desc[] __initdata = {
 	MSM_DEVICE(VIC),
 	MSM_DEVICE(CSR),
@@ -45,9 +48,12 @@
 #ifdef CONFIG_MSM_DEBUG_UART
 	MSM_DEVICE(DEBUG_UART),
 #endif
+#ifdef CONFIG_ARCH_MSM7X30
+	MSM_DEVICE(GCC),
+#endif
 	{
 		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
-		.pfn =      __phys_to_pfn(MSM_SHARED_RAM_PHYS),
+		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
 		.length =   MSM_SHARED_RAM_SIZE,
 		.type =     MT_DEVICE,
 	},
@@ -60,9 +66,72 @@
 	 * pages are peripheral interface or not.
 	 */
 	asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
-
 	iotable_init(msm_io_desc, ARRAY_SIZE(msm_io_desc));
 }
+#endif
+
+#ifdef CONFIG_ARCH_QSD8X50
+static struct map_desc qsd8x50_io_desc[] __initdata = {
+	MSM_DEVICE(VIC),
+	MSM_DEVICE(CSR),
+	MSM_DEVICE(TMR),
+	MSM_DEVICE(DMOV),
+	MSM_DEVICE(GPIO1),
+	MSM_DEVICE(GPIO2),
+	MSM_DEVICE(CLK_CTL),
+	MSM_DEVICE(SIRC),
+	MSM_DEVICE(SCPLL),
+	MSM_DEVICE(AD5),
+	MSM_DEVICE(MDC),
+#ifdef CONFIG_MSM_DEBUG_UART
+	MSM_DEVICE(DEBUG_UART),
+#endif
+	{
+		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
+		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
+		.length =   MSM_SHARED_RAM_SIZE,
+		.type =     MT_DEVICE,
+	},
+};
+
+void __init msm_map_qsd8x50_io(void)
+{
+	iotable_init(qsd8x50_io_desc, ARRAY_SIZE(qsd8x50_io_desc));
+}
+#endif /* CONFIG_ARCH_QSD8X50 */
+
+#ifdef CONFIG_ARCH_MSM7X30
+static struct map_desc msm7x30_io_desc[] __initdata = {
+	MSM_DEVICE(VIC),
+	MSM_DEVICE(CSR),
+	MSM_DEVICE(TMR),
+	MSM_DEVICE(DMOV),
+	MSM_DEVICE(GPIO1),
+	MSM_DEVICE(GPIO2),
+	MSM_DEVICE(CLK_CTL),
+	MSM_DEVICE(CLK_CTL_SH2),
+	MSM_DEVICE(AD5),
+	MSM_DEVICE(MDC),
+	MSM_DEVICE(ACC),
+	MSM_DEVICE(SAW),
+	MSM_DEVICE(GCC),
+	MSM_DEVICE(TCSR),
+#ifdef CONFIG_MSM_DEBUG_UART
+	MSM_DEVICE(DEBUG_UART),
+#endif
+	{
+		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
+		.pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
+		.length =   MSM_SHARED_RAM_SIZE,
+		.type =     MT_DEVICE,
+	},
+};
+
+void __init msm_map_msm7x30_io(void)
+{
+	iotable_init(msm7x30_io_desc, ARRAY_SIZE(msm7x30_io_desc));
+}
+#endif /* CONFIG_ARCH_MSM7X30 */
 
 void __iomem *
 __msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/irq.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/irq.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/irq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/irq.c	2010-08-01 18:11:14.000000000 -0400
@@ -101,11 +101,11 @@
 
 	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
 		writel(readl(treg) | b, treg);
-		set_irq_handler(irq, handle_edge_irq);
+		irq_desc[irq].handle_irq = handle_edge_irq;
 	}
 	if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
 		writel(readl(treg) & (~b), treg);
-		set_irq_handler(irq, handle_level_irq);
+		irq_desc[irq].handle_irq = handle_level_irq;
 	}
 	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/irq-vic.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/irq-vic.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/irq-vic.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/irq-vic.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,365 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/hardware.h>
+
+#include <mach/msm_iomap.h>
+
+#include "smd_private.h"
+
+enum {
+	IRQ_DEBUG_SLEEP_INT_TRIGGER = 1U << 0,
+	IRQ_DEBUG_SLEEP_INT = 1U << 1,
+	IRQ_DEBUG_SLEEP_ABORT = 1U << 2,
+	IRQ_DEBUG_SLEEP = 1U << 3,
+	IRQ_DEBUG_SLEEP_REQUEST = 1U << 4,
+};
+static int msm_irq_debug_mask;
+module_param_named(debug_mask, msm_irq_debug_mask, int,
+		   S_IRUGO | S_IWUSR | S_IWGRP);
+
+#define VIC_REG(off) (MSM_VIC_BASE + (off))
+#define VIC_INT_TO_REG_ADDR(base, irq) (base + (irq / 32) * 4)
+#define VIC_INT_TO_REG_INDEX(irq) ((irq >> 5) & 3)
+
+#define VIC_INT_SELECT0     VIC_REG(0x0000)  /* 1: FIQ, 0: IRQ */
+#define VIC_INT_SELECT1     VIC_REG(0x0004)  /* 1: FIQ, 0: IRQ */
+#define VIC_INT_SELECT2     VIC_REG(0x0008)  /* 1: FIQ, 0: IRQ */
+#define VIC_INT_SELECT3     VIC_REG(0x000C)  /* 1: FIQ, 0: IRQ */
+#define VIC_INT_EN0         VIC_REG(0x0010)
+#define VIC_INT_EN1         VIC_REG(0x0014)
+#define VIC_INT_EN2         VIC_REG(0x0018)
+#define VIC_INT_EN3         VIC_REG(0x001C)
+#define VIC_INT_ENCLEAR0    VIC_REG(0x0020)
+#define VIC_INT_ENCLEAR1    VIC_REG(0x0024)
+#define VIC_INT_ENCLEAR2    VIC_REG(0x0028)
+#define VIC_INT_ENCLEAR3    VIC_REG(0x002C)
+#define VIC_INT_ENSET0      VIC_REG(0x0030)
+#define VIC_INT_ENSET1      VIC_REG(0x0034)
+#define VIC_INT_ENSET2      VIC_REG(0x0038)
+#define VIC_INT_ENSET3      VIC_REG(0x003C)
+#define VIC_INT_TYPE0       VIC_REG(0x0040)  /* 1: EDGE, 0: LEVEL  */
+#define VIC_INT_TYPE1       VIC_REG(0x0044)  /* 1: EDGE, 0: LEVEL  */
+#define VIC_INT_TYPE2       VIC_REG(0x0048)  /* 1: EDGE, 0: LEVEL  */
+#define VIC_INT_TYPE3       VIC_REG(0x004C)  /* 1: EDGE, 0: LEVEL  */
+#define VIC_INT_POLARITY0   VIC_REG(0x0050)  /* 1: NEG, 0: POS */
+#define VIC_INT_POLARITY1   VIC_REG(0x0054)  /* 1: NEG, 0: POS */
+#define VIC_INT_POLARITY2   VIC_REG(0x0058)  /* 1: NEG, 0: POS */
+#define VIC_INT_POLARITY3   VIC_REG(0x005C)  /* 1: NEG, 0: POS */
+#define VIC_NO_PEND_VAL     VIC_REG(0x0060)
+
+#if defined(CONFIG_ARCH_MSM_SCORPION)
+#define VIC_NO_PEND_VAL_FIQ VIC_REG(0x0064)
+#define VIC_INT_MASTEREN    VIC_REG(0x0068)  /* 1: IRQ, 2: FIQ     */
+#define VIC_CONFIG          VIC_REG(0x006C)  /* 1: USE SC VIC */
+#else
+#define VIC_INT_MASTEREN    VIC_REG(0x0064)  /* 1: IRQ, 2: FIQ     */
+#define VIC_PROTECTION      VIC_REG(0x006C)  /* 1: ENABLE          */
+#define VIC_CONFIG          VIC_REG(0x0068)  /* 1: USE ARM1136 VIC */
+#endif
+
+#define VIC_IRQ_STATUS0     VIC_REG(0x0080)
+#define VIC_IRQ_STATUS1     VIC_REG(0x0084)
+#define VIC_IRQ_STATUS2     VIC_REG(0x0088)
+#define VIC_IRQ_STATUS3     VIC_REG(0x008C)
+#define VIC_FIQ_STATUS0     VIC_REG(0x0090)
+#define VIC_FIQ_STATUS1     VIC_REG(0x0094)
+#define VIC_FIQ_STATUS2     VIC_REG(0x0098)
+#define VIC_FIQ_STATUS3     VIC_REG(0x009C)
+#define VIC_RAW_STATUS0     VIC_REG(0x00A0)
+#define VIC_RAW_STATUS1     VIC_REG(0x00A4)
+#define VIC_RAW_STATUS2     VIC_REG(0x00A8)
+#define VIC_RAW_STATUS3     VIC_REG(0x00AC)
+#define VIC_INT_CLEAR0      VIC_REG(0x00B0)
+#define VIC_INT_CLEAR1      VIC_REG(0x00B4)
+#define VIC_INT_CLEAR2      VIC_REG(0x00B8)
+#define VIC_INT_CLEAR3      VIC_REG(0x00BC)
+#define VIC_SOFTINT0        VIC_REG(0x00C0)
+#define VIC_SOFTINT1        VIC_REG(0x00C4)
+#define VIC_SOFTINT2        VIC_REG(0x00C8)
+#define VIC_SOFTINT3        VIC_REG(0x00CC)
+#define VIC_IRQ_VEC_RD      VIC_REG(0x00D0)  /* pending int # */
+#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4)  /* pending vector addr */
+#define VIC_IRQ_VEC_WR      VIC_REG(0x00D8)
+
+#if defined(CONFIG_ARCH_MSM_SCORPION)
+#define VIC_FIQ_VEC_RD      VIC_REG(0x00DC)
+#define VIC_FIQ_VEC_PEND_RD VIC_REG(0x00E0)
+#define VIC_FIQ_VEC_WR      VIC_REG(0x00E4)
+#define VIC_IRQ_IN_SERVICE  VIC_REG(0x00E8)
+#define VIC_IRQ_IN_STACK    VIC_REG(0x00EC)
+#define VIC_FIQ_IN_SERVICE  VIC_REG(0x00F0)
+#define VIC_FIQ_IN_STACK    VIC_REG(0x00F4)
+#define VIC_TEST_BUS_SEL    VIC_REG(0x00F8)
+#define VIC_IRQ_CTRL_CONFIG VIC_REG(0x00FC)
+#else
+#define VIC_IRQ_IN_SERVICE  VIC_REG(0x00E0)
+#define VIC_IRQ_IN_STACK    VIC_REG(0x00E4)
+#define VIC_TEST_BUS_SEL    VIC_REG(0x00E8)
+#endif
+
+#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
+#define VIC_VECTADDR(n)     VIC_REG(0x0400+((n) * 4))
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define VIC_NUM_REGS	    4
+#else
+#define VIC_NUM_REGS	    2
+#endif
+
+#if VIC_NUM_REGS == 2
+#define DPRINT_REGS(base_reg, format, ...)	      			\
+	printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__,		\
+			readl(base_reg ## 0), readl(base_reg ## 1))
+#define DPRINT_ARRAY(array, format, ...)				\
+	printk(KERN_INFO format " %x %x\n", ##__VA_ARGS__,		\
+			array[0], array[1])
+#elif VIC_NUM_REGS == 4
+#define DPRINT_REGS(base_reg, format, ...) \
+	printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__,	\
+			readl(base_reg ## 0), readl(base_reg ## 1),	\
+			readl(base_reg ## 2), readl(base_reg ## 3))
+#define DPRINT_ARRAY(array, format, ...)				\
+	printk(KERN_INFO format " %x %x %x %x\n", ##__VA_ARGS__,	\
+			array[0], array[1],				\
+			array[2], array[3])
+#else
+#error "VIC_NUM_REGS set to illegal value"
+#endif
+
+static uint32_t msm_irq_smsm_wake_enable[2];
+static struct {
+	uint32_t int_en[2];
+	uint32_t int_type;
+	uint32_t int_polarity;
+	uint32_t int_select;
+} msm_irq_shadow_reg[VIC_NUM_REGS];
+static uint32_t msm_irq_idle_disable[VIC_NUM_REGS];
+
+#define SMSM_FAKE_IRQ (0xff)
+static uint8_t msm_irq_to_smsm[NR_IRQS] = {
+	[INT_MDDI_EXT] = 1,
+	[INT_MDDI_PRI] = 2,
+	[INT_MDDI_CLIENT] = 3,
+	[INT_USB_OTG] = 4,
+
+	[INT_PWB_I2C] = 5,
+	[INT_SDC1_0] = 6,
+	[INT_SDC1_1] = 7,
+	[INT_SDC2_0] = 8,
+
+	[INT_SDC2_1] = 9,
+	[INT_ADSP_A9_A11] = 10,
+	[INT_UART1] = 11,
+	[INT_UART2] = 12,
+
+	[INT_UART3] = 13,
+	[INT_UART1_RX] = 14,
+	[INT_UART2_RX] = 15,
+	[INT_UART3_RX] = 16,
+
+	[INT_UART1DM_IRQ] = 17,
+	[INT_UART1DM_RX] = 18,
+	[INT_KEYSENSE] = 19,
+#if !defined(CONFIG_ARCH_MSM7X30)
+	[INT_AD_HSSD] = 20,
+#endif
+
+	[INT_NAND_WR_ER_DONE] = 21,
+	[INT_NAND_OP_DONE] = 22,
+	[INT_TCHSCRN1] = 23,
+	[INT_TCHSCRN2] = 24,
+
+	[INT_TCHSCRN_SSBI] = 25,
+	[INT_USB_HS] = 26,
+	[INT_UART2DM_RX] = 27,
+	[INT_UART2DM_IRQ] = 28,
+
+	[INT_SDC4_1] = 29,
+	[INT_SDC4_0] = 30,
+	[INT_SDC3_1] = 31,
+	[INT_SDC3_0] = 32,
+
+	/* fake wakeup interrupts */
+	[INT_GPIO_GROUP1] = SMSM_FAKE_IRQ,
+	[INT_GPIO_GROUP2] = SMSM_FAKE_IRQ,
+	[INT_A9_M2A_0] = SMSM_FAKE_IRQ,
+	[INT_A9_M2A_1] = SMSM_FAKE_IRQ,
+	[INT_A9_M2A_5] = SMSM_FAKE_IRQ,
+	[INT_GP_TIMER_EXP] = SMSM_FAKE_IRQ,
+	[INT_DEBUG_TIMER_EXP] = SMSM_FAKE_IRQ,
+	[INT_ADSP_A11] = SMSM_FAKE_IRQ,
+#ifdef CONFIG_ARCH_QSD8X50
+	[INT_SIRC_0] = SMSM_FAKE_IRQ,
+	[INT_SIRC_1] = SMSM_FAKE_IRQ,
+#endif
+};
+
+static inline void msm_irq_write_all_regs(void __iomem *base, unsigned int val)
+{
+	int i;
+
+	for (i = 0; i < VIC_NUM_REGS; i++)
+		writel(val, base + (i * 4));
+}
+
+static void msm_irq_ack(unsigned int irq)
+{
+	void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_CLEAR0, irq);
+	irq = 1 << (irq & 31);
+	writel(irq, reg);
+}
+
+static void msm_irq_mask(unsigned int irq)
+{
+	void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENCLEAR0, irq);
+	unsigned index = VIC_INT_TO_REG_INDEX(irq);
+	uint32_t mask = 1UL << (irq & 31);
+	int smsm_irq = msm_irq_to_smsm[irq];
+
+	msm_irq_shadow_reg[index].int_en[0] &= ~mask;
+	writel(mask, reg);
+	if (smsm_irq == 0)
+		msm_irq_idle_disable[index] &= ~mask;
+	else {
+		mask = 1UL << (smsm_irq - 1);
+		msm_irq_smsm_wake_enable[0] &= ~mask;
+	}
+}
+
+static void msm_irq_unmask(unsigned int irq)
+{
+	void __iomem *reg = VIC_INT_TO_REG_ADDR(VIC_INT_ENSET0, irq);
+	unsigned index = VIC_INT_TO_REG_INDEX(irq);
+	uint32_t mask = 1UL << (irq & 31);
+	int smsm_irq = msm_irq_to_smsm[irq];
+
+	msm_irq_shadow_reg[index].int_en[0] |= mask;
+	writel(mask, reg);
+
+	if (smsm_irq == 0)
+		msm_irq_idle_disable[index] |= mask;
+	else {
+		mask = 1UL << (smsm_irq - 1);
+		msm_irq_smsm_wake_enable[0] |= mask;
+	}
+}
+
+static int msm_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	unsigned index = VIC_INT_TO_REG_INDEX(irq);
+	uint32_t mask = 1UL << (irq & 31);
+	int smsm_irq = msm_irq_to_smsm[irq];
+
+	if (smsm_irq == 0) {
+		printk(KERN_ERR "msm_irq_set_wake: bad wakeup irq %d\n", irq);
+		return -EINVAL;
+	}
+	if (on)
+		msm_irq_shadow_reg[index].int_en[1] |= mask;
+	else
+		msm_irq_shadow_reg[index].int_en[1] &= ~mask;
+
+	if (smsm_irq == SMSM_FAKE_IRQ)
+		return 0;
+
+	mask = 1UL << (smsm_irq - 1);
+	if (on)
+		msm_irq_smsm_wake_enable[1] |= mask;
+	else
+		msm_irq_smsm_wake_enable[1] &= ~mask;
+	return 0;
+}
+
+static int msm_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+	void __iomem *treg = VIC_INT_TO_REG_ADDR(VIC_INT_TYPE0, irq);
+	void __iomem *preg = VIC_INT_TO_REG_ADDR(VIC_INT_POLARITY0, irq);
+	unsigned index = VIC_INT_TO_REG_INDEX(irq);
+	int b = 1 << (irq & 31);
+	uint32_t polarity;
+	uint32_t type;
+
+	polarity = msm_irq_shadow_reg[index].int_polarity;
+	if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
+		polarity |= b;
+	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
+		polarity &= ~b;
+	writel(polarity, preg);
+	msm_irq_shadow_reg[index].int_polarity = polarity;
+
+	type = msm_irq_shadow_reg[index].int_type;
+	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+		type |= b;
+		irq_desc[irq].handle_irq = handle_edge_irq;
+	}
+	if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
+		type &= ~b;
+		irq_desc[irq].handle_irq = handle_level_irq;
+	}
+	writel(type, treg);
+	msm_irq_shadow_reg[index].int_type = type;
+	return 0;
+}
+
+static struct irq_chip msm_irq_chip = {
+	.name      = "msm",
+	.disable   = msm_irq_mask,
+	.ack       = msm_irq_ack,
+	.mask      = msm_irq_mask,
+	.unmask    = msm_irq_unmask,
+	.set_wake  = msm_irq_set_wake,
+	.set_type  = msm_irq_set_type,
+};
+
+void __init msm_init_irq(void)
+{
+	unsigned n;
+
+	/* select level interrupts */
+	msm_irq_write_all_regs(VIC_INT_TYPE0, 0);
+
+	/* select highlevel interrupts */
+	msm_irq_write_all_regs(VIC_INT_POLARITY0, 0);
+
+	/* select IRQ for all INTs */
+	msm_irq_write_all_regs(VIC_INT_SELECT0, 0);
+
+	/* disable all INTs */
+	msm_irq_write_all_regs(VIC_INT_EN0, 0);
+
+	/* don't use vic */
+	writel(0, VIC_CONFIG);
+
+	/* enable interrupt controller */
+	writel(3, VIC_INT_MASTEREN);
+
+	for (n = 0; n < NR_MSM_IRQS; n++) {
+		set_irq_chip(n, &msm_irq_chip);
+		set_irq_handler(n, handle_level_irq);
+		set_irq_flags(n, IRQF_VALID);
+	}
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-msm/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,7 +1,80 @@
 if ARCH_MSM
 
-comment "MSM Board Type"
+choice
+	prompt "Qualcomm MSM SoC Type"
+	default ARCH_MSM7X00A
+
+config ARCH_MSM7X00A
+	bool "MSM7x00A / MSM7x01A"
+	select ARCH_MSM_ARM11
+	select MSM_SMD
+	select MSM_SMD_PKG3
+	select CPU_V6
+
+config ARCH_MSM7X30
+	bool "MSM7x30"
+	select ARCH_MSM_SCORPION
+	select MSM_SMD
+	select MSM_VIC
+	select CPU_V7
+	select MSM_REMOTE_SPINLOCK_DEKKERS
+
+config ARCH_QSD8X50
+	bool "QSD8X50"
+	select ARCH_MSM_SCORPION
+	select MSM_SMD
+	select MSM_VIC
+	select CPU_V7
+	select MSM_REMOTE_SPINLOCK_LDREX
+endchoice
+
+config MSM_SOC_REV_A
+	bool
+
+config  ARCH_MSM_ARM11
+	bool
+config  ARCH_MSM_SCORPION
+	bool
+
+config  MSM_VIC
+	bool
+
+menu "Qualcomm MSM Board Type"
+
+config MACH_HALIBUT
+	depends on ARCH_MSM
+	depends on ARCH_MSM7X00A
+	bool "Halibut Board (QCT SURF7201A)"
+	help
+	  Support for the Qualcomm SURF7201A eval board.
+
+config MACH_TROUT
 	depends on ARCH_MSM
+	depends on ARCH_MSM7X00A
+	bool "HTC Dream (aka trout)"
+	help
+	  Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
+
+config MACH_MSM7X30_SURF
+	depends on ARCH_MSM7X30
+	bool "MSM7x30 SURF"
+	help
+	  Support for the Qualcomm MSM7x30 SURF eval board.
+
+config MACH_QSD8X50_SURF
+	depends on ARCH_QSD8X50
+	bool "QSD8x50 SURF"
+	help
+	  Support for the Qualcomm QSD8x50 SURF eval board.
+
+config MACH_QSD8X50A_ST1_5
+	depends on ARCH_QSD8X50
+	select MSM_SOC_REV_A
+	bool "QSD8x50A ST1.5"
+	help
+	  Support for the Qualcomm ST1.5.
+
+endmenu
 
 config MSM_DEBUG_UART
 	int
@@ -27,17 +100,10 @@
 		bool "UART3"
 endchoice
 
-config MACH_HALIBUT
-	depends on ARCH_MSM
-	default y
-	bool "Halibut Board (QCT SURF7201A)"
-	help
-	  Support for the Qualcomm SURF7201A eval board.
+config MSM_SMD_PKG3
+	bool
 
-config MACH_TROUT
-	default y
-	bool "HTC Dream (aka trout)"
-	help
-	  Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
+config MSM_SMD
+	bool
 
 endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/last_radio_log.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/last_radio_log.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/last_radio_log.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/last_radio_log.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,82 @@
+/* arch/arm/mach-msm/last_radio_log.c
+ *
+ * Extract the log from a modem crash though SMEM
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+
+#include "smd_private.h"
+
+static void *radio_log_base;
+static size_t radio_log_size;
+
+extern void *smem_item(unsigned id, unsigned *size);
+
+static ssize_t last_radio_log_read(struct file *file, char __user *buf,
+			size_t len, loff_t *offset)
+{
+	loff_t pos = *offset;
+	ssize_t count;
+
+	if (pos >= radio_log_size)
+		return 0;
+
+	count = min(len, (size_t)(radio_log_size - pos));
+	if (copy_to_user(buf, radio_log_base + pos, count)) {
+		pr_err("%s: copy to user failed\n", __func__);
+		return -EFAULT;
+	}
+
+	*offset += count;
+	return count;
+}
+
+static struct file_operations last_radio_log_fops = {
+	.read = last_radio_log_read
+};
+
+void msm_init_last_radio_log(struct module *owner)
+{
+	struct proc_dir_entry *entry;
+
+	if (last_radio_log_fops.owner) {
+		pr_err("%s: already claimed\n", __func__);
+		return;
+	}
+
+	radio_log_base = smem_item(SMEM_CLKREGIM_BSP, &radio_log_size);
+	if (!radio_log_base) {
+		pr_err("%s: could not retrieve SMEM_CLKREGIM_BSP\n", __func__);
+		return;
+	}
+
+	entry = create_proc_entry("last_radio_log", S_IFREG | S_IRUGO, NULL);
+	if (!entry) {
+		pr_err("%s: could not create proc entry for radio log\n",
+				__func__);
+		return;
+	}
+
+	pr_err("%s: last radio log is %d bytes long\n", __func__,
+		radio_log_size);
+	last_radio_log_fops.owner = owner;
+	entry->proc_fops = &last_radio_log_fops;
+	entry->size = radio_log_size;
+}
+EXPORT_SYMBOL(msm_init_last_radio_log);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-msm/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -1,9 +1,22 @@
-obj-y += io.o idle.o irq.o timer.o dma.o
-obj-y += devices.o
 obj-y += proc_comm.o
+obj-y += io.o idle.o timer.o dma.o
 obj-y += vreg.o
-obj-y += clock.o clock-7x01a.o
+obj-y += acpuclock-arm11.o
+obj-y += clock.o clock-pcom.o
+obj-y += gpio.o
 
-obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
+ifdef CONFIG_MSM_VIC
+obj-y += irq-vic.o
+else
+obj-y += irq.o
+endif
+
+obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
+obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
+obj-$(CONFIG_MSM_SMD) += last_radio_log.o
+
+obj-$(CONFIG_MACH_TROUT) += board-trout.o devices-msm7x00.o
+obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
+obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
+obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
 
-obj-$(CONFIG_MACH_TROUT) += board-dream.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/proc_comm.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/proc_comm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/proc_comm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/proc_comm.c	2010-08-01 18:11:14.000000000 -0400
@@ -23,11 +23,18 @@
 
 #include "proc_comm.h"
 
-#define MSM_A2M_INT(n) (MSM_CSR_BASE + 0x400 + (n) * 4)
+static inline void msm_a2m_int(uint32_t irq)
+{
+#if defined(CONFIG_ARCH_MSM7X30)
+	writel(1 << irq, MSM_GCC_BASE + 0x8);
+#else
+	writel(1, MSM_CSR_BASE + 0x400 + (irq * 4));
+#endif
+}
 
 static inline void notify_other_proc_comm(void)
 {
-	writel(1, MSM_A2M_INT(6));
+	msm_a2m_int(6);
 }
 
 #define APP_COMMAND 0x00
@@ -107,4 +114,17 @@
 	return ret;
 }
 
-
+/*
+ * We need to wait for the ARM9 to at least partially boot
+ * up before we can continue. Since the ARM9 does resource
+ * allocation, if we dont' wait we could end up crashing or in
+ * and unknown state. This function should be called early to
+ * wait on the ARM9.
+ */
+void __init proc_comm_boot_wait(void)
+{
+	void __iomem *base = MSM_SHARED_RAM_BASE;
+ 
+	proc_comm_wait_for(base + MDM_STATUS, PCOM_READY);
+ 
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/proc_comm.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/proc_comm.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/proc_comm.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/proc_comm.h	2010-08-01 18:11:14.000000000 -0400
@@ -16,6 +16,8 @@
 #ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_
 #define _ARCH_ARM_MACH_MSM_PROC_COMM_H_
 
+#include <linux/init.h>
+
 enum {
 	PCOM_CMD_IDLE = 0x0,
 	PCOM_CMD_DONE,
@@ -62,19 +64,104 @@
 	PCOM_RESET_CHIP_IMM,
 	PCOM_PM_VID_EN,
 	PCOM_VREG_PULLDOWN,
+	PCOM_GET_MODEM_VERSION,
+	PCOM_CLK_REGIME_SEC_RESET,
+	PCOM_CLK_REGIME_SEC_RESET_ASSERT,
+	PCOM_CLK_REGIME_SEC_RESET_DEASSERT,
+	PCOM_CLK_REGIME_SEC_PLL_REQUEST_WRP,
+	PCOM_CLK_REGIME_SEC_ENABLE,
+	PCOM_CLK_REGIME_SEC_DISABLE,
+	PCOM_CLK_REGIME_SEC_IS_ON,
+	PCOM_CLK_REGIME_SEC_SEL_CLK_INV,
+	PCOM_CLK_REGIME_SEC_SEL_CLK_SRC,
+	PCOM_CLK_REGIME_SEC_SEL_CLK_DIV,
+	PCOM_CLK_REGIME_SEC_ICODEC_CLK_ENABLE,
+	PCOM_CLK_REGIME_SEC_ICODEC_CLK_DISABLE,
+	PCOM_CLK_REGIME_SEC_SEL_SPEED,
+	PCOM_CLK_REGIME_SEC_CONFIG_GP_CLK_WRP,
+	PCOM_CLK_REGIME_SEC_CONFIG_MDH_CLK_WRP,
+	PCOM_CLK_REGIME_SEC_USB_XTAL_ON,
+	PCOM_CLK_REGIME_SEC_USB_XTAL_OFF,
+	PCOM_CLK_REGIME_SEC_SET_QDSP_DME_MODE,
+	PCOM_CLK_REGIME_SEC_SWITCH_ADSP_CLK,
+	PCOM_CLK_REGIME_SEC_GET_MAX_ADSP_CLK_KHZ,
+	PCOM_CLK_REGIME_SEC_GET_I2C_CLK_KHZ,
+	PCOM_CLK_REGIME_SEC_MSM_GET_CLK_FREQ_KHZ,
+	PCOM_CLK_REGIME_SEC_SEL_VFE_SRC,
+	PCOM_CLK_REGIME_SEC_MSM_SEL_CAMCLK,
+	PCOM_CLK_REGIME_SEC_MSM_SEL_LCDCLK,
+	PCOM_CLK_REGIME_SEC_VFE_RAIL_OFF,
+	PCOM_CLK_REGIME_SEC_VFE_RAIL_ON,
+	PCOM_CLK_REGIME_SEC_GRP_RAIL_OFF,
+	PCOM_CLK_REGIME_SEC_GRP_RAIL_ON,
+	PCOM_CLK_REGIME_SEC_VDC_RAIL_OFF,
+	PCOM_CLK_REGIME_SEC_VDC_RAIL_ON,
+	PCOM_CLK_REGIME_SEC_LCD_CTRL,
+	PCOM_CLK_REGIME_SEC_REGISTER_FOR_CPU_RESOURCE,
+	PCOM_CLK_REGIME_SEC_DEREGISTER_FOR_CPU_RESOURCE,
+	PCOM_CLK_REGIME_SEC_RESOURCE_REQUEST_WRP,
+	PCOM_CLK_REGIME_MSM_SEC_SEL_CLK_OWNER,
+	PCOM_CLK_REGIME_SEC_DEVMAN_REQUEST_WRP,
+	PCOM_GPIO_CONFIG,
+	PCOM_GPIO_CONFIGURE_GROUP,
+	PCOM_GPIO_TLMM_SET_PORT,
+	PCOM_GPIO_TLMM_CONFIG_EX,
+	PCOM_SET_FTM_BOOT_COUNT,
+	PCOM_RESERVED0,
+	PCOM_RESERVED1,
+	PCOM_CUSTOMER_CMD1,
+	PCOM_CUSTOMER_CMD2,
+	PCOM_CUSTOMER_CMD3,
+	PCOM_CLK_REGIME_ENTER_APPSBL_CHG_MODE,
+	PCOM_CLK_REGIME_EXIT_APPSBL_CHG_MODE,
+	PCOM_CLK_REGIME_SEC_RAIL_DISABLE,
+	PCOM_CLK_REGIME_SEC_RAIL_ENABLE,
+	PCOM_CLK_REGIME_SEC_RAIL_CONTROL,
+	PCOM_SET_SW_WATCHDOG_STATE,
+	PCOM_PM_MPP_CONFIG_DIGITAL_INPUT,
+	PCOM_PM_MPP_CONFIG_I_SINK,
+	PCOM_RESERVED_101,
+	PCOM_MSM_HSUSB_PHY_RESET,
+	PCOM_GET_BATT_MV_LEVEL,
+	PCOM_CHG_USB_IS_PC_CONNECTED,
+	PCOM_CHG_USB_IS_CHARGER_CONNECTED,
+	PCOM_CHG_USB_IS_DISCONNECTED,
+	PCOM_CHG_USB_IS_AVAILABLE,
+	PCOM_CLK_REGIME_SEC_MSM_SEL_FREQ,
+	PCOM_CLK_REGIME_SEC_SET_PCLK_AXI_POLICY,
+	PCOM_CLKCTL_RPC_RESET_ASSERT,
+	PCOM_CLKCTL_RPC_RESET_DEASSERT,
+	PCOM_CLKCTL_RPC_RAIL_ON,
+	PCOM_CLKCTL_RPC_RAIL_OFF,
+	PCOM_CLKCTL_RPC_RAIL_ENABLE,
+	PCOM_CLKCTL_RPC_RAIL_DISABLE,
+	PCOM_CLKCTL_RPC_RAIL_CONTROL,
+	PCOM_CLKCTL_RPC_MIN_MSMC1,
 	PCOM_NUM_CMDS,
 };
 
 enum {
-	 PCOM_INVALID_STATUS = 0x0,
-	 PCOM_READY,
-	 PCOM_CMD_RUNNING,
-	 PCOM_CMD_SUCCESS,
-	 PCOM_CMD_FAIL,
+	PCOM_INVALID_STATUS = 0x0,
+	PCOM_READY,
+	PCOM_CMD_RUNNING,
+	PCOM_CMD_SUCCESS,
+	PCOM_CMD_FAIL,
+	PCOM_CMD_FAIL_FALSE_RETURNED,
+	PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_SERVER,
+	PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_CLIENT,
+	PCOM_CMD_FAIL_CMD_UNREGISTERED,
+	PCOM_CMD_FAIL_CMD_LOCKED,
+	PCOM_CMD_FAIL_SERVER_NOT_YET_READY,
+	PCOM_CMD_FAIL_BAD_DESTINATION,
+	PCOM_CMD_FAIL_SERVER_RESET,
+	PCOM_CMD_FAIL_SMSM_NOT_INIT,
+	PCOM_CMD_FAIL_PROC_COMM_BUSY,
+	PCOM_CMD_FAIL_PROC_COMM_NOT_INIT,
+
 };
 
 /* List of VREGs that support the Pull Down Resistor setting. */
-enum {
+enum vreg_pdown_id {
 	PM_VREG_PDOWN_MSMA_ID,
 	PM_VREG_PDOWN_MSMP_ID,
 	PM_VREG_PDOWN_MSME1_ID,	/* Not supported in Panoramix */
@@ -131,6 +218,11 @@
 	PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID
 };
 
+enum {
+	PCOM_CLKRGM_APPS_RESET_USB_PHY	= 34,
+	PCOM_CLKRGM_APPS_RESET_USBH	= 37,
+};
+
 /* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */
 
 #define GPIO_ENABLE	0
@@ -161,5 +253,6 @@
 		(((drvstr) & 0xF) << 17))
 
 int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
+void __init proc_comm_boot_wait(void);
 
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/sirc.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/sirc.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/sirc.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/sirc.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,177 @@
+/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+
+static unsigned int int_enable;
+static unsigned int wake_enable;
+
+static struct sirc_regs_t sirc_regs = {
+	.int_enable       = SPSS_SIRC_INT_ENABLE,
+	.int_enable_clear = SPSS_SIRC_INT_ENABLE_CLEAR,
+	.int_enable_set   = SPSS_SIRC_INT_ENABLE_SET,
+	.int_type         = SPSS_SIRC_INT_TYPE,
+	.int_polarity     = SPSS_SIRC_INT_POLARITY,
+	.int_clear        = SPSS_SIRC_INT_CLEAR,
+};
+
+static struct sirc_cascade_regs sirc_reg_table[] = {
+	{
+		.int_status  = SPSS_SIRC_IRQ_STATUS,
+		.cascade_irq = INT_SIRC_0,
+	}
+};
+
+static unsigned int save_type;
+static unsigned int save_polarity;
+
+/* Mask off the given interrupt. Keep the int_enable mask in sync with
+   the enable reg, so it can be restored after power collapse. */
+static void sirc_irq_mask(unsigned int irq)
+{
+	unsigned int mask;
+
+
+	mask = 1 << (irq - FIRST_SIRC_IRQ);
+	writel(mask, sirc_regs.int_enable_clear);
+	int_enable &= ~mask;
+	return;
+}
+
+/* Unmask the given interrupt. Keep the int_enable mask in sync with
+   the enable reg, so it can be restored after power collapse. */
+static void sirc_irq_unmask(unsigned int irq)
+{
+	unsigned int mask;
+
+	mask = 1 << (irq - FIRST_SIRC_IRQ);
+	writel(mask, sirc_regs.int_enable_set);
+	int_enable |= mask;
+	return;
+}
+
+static void sirc_irq_ack(unsigned int irq)
+{
+	unsigned int mask;
+
+	mask = 1 << (irq - FIRST_SIRC_IRQ);
+	writel(mask, sirc_regs.int_clear);
+	return;
+}
+
+static int sirc_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	unsigned int mask;
+
+	/* Used to set the interrupt enable mask during power collapse. */
+	mask = 1 << (irq - FIRST_SIRC_IRQ);
+	if (on)
+		wake_enable |= mask;
+	else
+		wake_enable &= ~mask;
+
+	return 0;
+}
+
+static int sirc_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+	unsigned int mask;
+	unsigned int val;
+
+	mask = 1 << (irq - FIRST_SIRC_IRQ);
+	val = readl(sirc_regs.int_polarity);
+
+	if (flow_type & (IRQF_TRIGGER_LOW | IRQF_TRIGGER_FALLING))
+		val |= mask;
+	else
+		val &= ~mask;
+
+	writel(val, sirc_regs.int_polarity);
+
+	val = readl(sirc_regs.int_type);
+	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+		val |= mask;
+		irq_desc[irq].handle_irq = handle_edge_irq;
+	} else {
+		val &= ~mask;
+		irq_desc[irq].handle_irq = handle_level_irq;
+	}
+
+	writel(val, sirc_regs.int_type);
+
+	return 0;
+}
+
+/* Finds the pending interrupt on the passed cascade irq and redrives it */
+static void sirc_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int reg = 0;
+	unsigned int sirq;
+	unsigned int status;
+
+	while ((reg < ARRAY_SIZE(sirc_reg_table)) &&
+		(sirc_reg_table[reg].cascade_irq != irq))
+		reg++;
+
+	status = readl(sirc_reg_table[reg].int_status);
+	status &= SIRC_MASK;
+	if (status == 0)
+		return;
+
+	for (sirq = 0;
+	     (sirq < NR_SIRC_IRQS) && ((status & (1U << sirq)) == 0);
+	     sirq++)
+		;
+	generic_handle_irq(sirq+FIRST_SIRC_IRQ);
+
+	desc->chip->ack(irq);
+}
+
+static struct irq_chip sirc_irq_chip = {
+	.name      = "sirc",
+	.ack       = sirc_irq_ack,
+	.mask      = sirc_irq_mask,
+	.unmask    = sirc_irq_unmask,
+	.set_wake  = sirc_irq_set_wake,
+	.set_type  = sirc_irq_set_type,
+};
+
+void __init msm_init_sirc(void)
+{
+	int i;
+
+	int_enable = 0;
+	wake_enable = 0;
+
+	for (i = FIRST_SIRC_IRQ; i < LAST_SIRC_IRQ; i++) {
+		set_irq_chip(i, &sirc_irq_chip);
+		set_irq_handler(i, handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sirc_reg_table); i++) {
+		set_irq_chained_handler(sirc_reg_table[i].cascade_irq,
+					sirc_irq_handler);
+		set_irq_wake(sirc_reg_table[i].cascade_irq, 1);
+	}
+	return;
+}
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/smd.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/smd.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/smd.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/smd.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,1046 @@
+/* arch/arm/mach-msm/smd.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+
+#include <mach/msm_smd.h>
+#include <mach/system.h>
+
+#include "smd_private.h"
+#include "proc_comm.h"
+
+#if defined(CONFIG_ARCH_QSD8X50)
+#define CONFIG_QDSP6 1
+#endif
+
+void (*msm_hw_reset_hook)(void);
+
+#define MODULE_NAME "msm_smd"
+
+enum {
+	MSM_SMD_DEBUG = 1U << 0,
+	MSM_SMSM_DEBUG = 1U << 0,
+};
+
+static int msm_smd_debug_mask;
+
+struct shared_info {
+	int ready;
+	unsigned state;
+};
+
+static unsigned dummy_state[SMSM_STATE_COUNT];
+
+static struct shared_info smd_info = {
+	.state = (unsigned) &dummy_state,
+};
+
+module_param_named(debug_mask, msm_smd_debug_mask,
+		   int, S_IRUGO | S_IWUSR | S_IWGRP);
+
+static unsigned last_heap_free = 0xffffffff;
+
+static inline void notify_other_smsm(void)
+{
+	msm_a2m_int(5);
+#ifdef CONFIG_QDSP6
+	msm_a2m_int(8);
+#endif
+}
+
+static inline void notify_modem_smd(void)
+{
+	msm_a2m_int(0);
+}
+
+static inline void notify_dsp_smd(void)
+{
+	msm_a2m_int(8);
+}
+
+static void smd_diag(void)
+{
+	char *x;
+
+	x = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG);
+	if (x != 0) {
+		x[SZ_DIAG_ERR_MSG - 1] = 0;
+		pr_info("smem: DIAG '%s'\n", x);
+	}
+}
+
+/* call when SMSM_RESET flag is set in the A9's smsm_state */
+static void handle_modem_crash(void)
+{
+	pr_err("ARM9 has CRASHED\n");
+	smd_diag();
+
+	/* hard reboot if possible */
+	if (msm_hw_reset_hook)
+		msm_hw_reset_hook();
+
+	/* in this case the modem or watchdog should reboot us */
+	for (;;)
+		;
+}
+
+uint32_t raw_smsm_get_state(enum smsm_state_item item)
+{
+	return readl(smd_info.state + item * 4);
+}
+
+static int check_for_modem_crash(void)
+{
+	if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET) {
+		handle_modem_crash();
+		return -1;
+	}
+	return 0;
+}
+
+/* the spinlock is used to synchronize between the
+ * irq handler and code that mutates the channel
+ * list or fiddles with channel state
+ */
+DEFINE_SPINLOCK(smd_lock);
+DEFINE_SPINLOCK(smem_lock);
+
+/* the mutex is used during open() and close()
+ * operations to avoid races while creating or
+ * destroying smd_channel structures
+ */
+static DEFINE_MUTEX(smd_creation_mutex);
+
+static int smd_initialized;
+
+LIST_HEAD(smd_ch_closed_list);
+LIST_HEAD(smd_ch_list_modem);
+LIST_HEAD(smd_ch_list_dsp);
+
+static unsigned char smd_ch_allocated[64];
+static struct work_struct probe_work;
+
+/* how many bytes are available for reading */
+static int smd_stream_read_avail(struct smd_channel *ch)
+{
+	return (ch->recv->head - ch->recv->tail) & ch->fifo_mask;
+}
+
+/* how many bytes we are free to write */
+static int smd_stream_write_avail(struct smd_channel *ch)
+{
+	return ch->fifo_mask -
+		((ch->send->head - ch->send->tail) & ch->fifo_mask);
+}
+
+static int smd_packet_read_avail(struct smd_channel *ch)
+{
+	if (ch->current_packet) {
+		int n = smd_stream_read_avail(ch);
+		if (n > ch->current_packet)
+			n = ch->current_packet;
+		return n;
+	} else {
+		return 0;
+	}
+}
+
+static int smd_packet_write_avail(struct smd_channel *ch)
+{
+	int n = smd_stream_write_avail(ch);
+	return n > SMD_HEADER_SIZE ? n - SMD_HEADER_SIZE : 0;
+}
+
+static int ch_is_open(struct smd_channel *ch)
+{
+	return (ch->recv->state == SMD_SS_OPENED) &&
+		(ch->send->state == SMD_SS_OPENED);
+}
+
+/* provide a pointer and length to readable data in the fifo */
+static unsigned ch_read_buffer(struct smd_channel *ch, void **ptr)
+{
+	unsigned head = ch->recv->head;
+	unsigned tail = ch->recv->tail;
+	*ptr = (void *) (ch->recv_data + tail);
+
+	if (tail <= head)
+		return head - tail;
+	else
+		return ch->fifo_size - tail;
+}
+
+/* advance the fifo read pointer after data from ch_read_buffer is consumed */
+static void ch_read_done(struct smd_channel *ch, unsigned count)
+{
+	BUG_ON(count > smd_stream_read_avail(ch));
+	ch->recv->tail = (ch->recv->tail + count) & ch->fifo_mask;
+	ch->send->fTAIL = 1;
+}
+
+/* basic read interface to ch_read_{buffer,done} used
+ * by smd_*_read() and update_packet_state()
+ * will read-and-discard if the _data pointer is null
+ */
+static int ch_read(struct smd_channel *ch, void *_data, int len)
+{
+	void *ptr;
+	unsigned n;
+	unsigned char *data = _data;
+	int orig_len = len;
+
+	while (len > 0) {
+		n = ch_read_buffer(ch, &ptr);
+		if (n == 0)
+			break;
+
+		if (n > len)
+			n = len;
+		if (_data)
+			memcpy(data, ptr, n);
+
+		data += n;
+		len -= n;
+		ch_read_done(ch, n);
+	}
+
+	return orig_len - len;
+}
+
+static void update_stream_state(struct smd_channel *ch)
+{
+	/* streams have no special state requiring updating */
+}
+
+static void update_packet_state(struct smd_channel *ch)
+{
+	unsigned hdr[5];
+	int r;
+
+	/* can't do anything if we're in the middle of a packet */
+	if (ch->current_packet != 0)
+		return;
+
+	/* don't bother unless we can get the full header */
+	if (smd_stream_read_avail(ch) < SMD_HEADER_SIZE)
+		return;
+
+	r = ch_read(ch, hdr, SMD_HEADER_SIZE);
+	BUG_ON(r != SMD_HEADER_SIZE);
+
+	ch->current_packet = hdr[0];
+}
+
+/* provide a pointer and length to next free space in the fifo */
+static unsigned ch_write_buffer(struct smd_channel *ch, void **ptr)
+{
+	unsigned head = ch->send->head;
+	unsigned tail = ch->send->tail;
+	*ptr = (void *) (ch->send_data + head);
+
+	if (head < tail) {
+		return tail - head - 1;
+	} else {
+		if (tail == 0)
+			return ch->fifo_size - head - 1;
+		else
+			return ch->fifo_size - head;
+	}
+}
+
+/* advace the fifo write pointer after freespace
+ * from ch_write_buffer is filled
+ */
+static void ch_write_done(struct smd_channel *ch, unsigned count)
+{
+	BUG_ON(count > smd_stream_write_avail(ch));
+	ch->send->head = (ch->send->head + count) & ch->fifo_mask;
+	ch->send->fHEAD = 1;
+}
+
+static void ch_set_state(struct smd_channel *ch, unsigned n)
+{
+	if (n == SMD_SS_OPENED) {
+		ch->send->fDSR = 1;
+		ch->send->fCTS = 1;
+		ch->send->fCD = 1;
+	} else {
+		ch->send->fDSR = 0;
+		ch->send->fCTS = 0;
+		ch->send->fCD = 0;
+	}
+	ch->send->state = n;
+	ch->send->fSTATE = 1;
+	ch->notify_other_cpu();
+}
+
+static void do_smd_probe(void)
+{
+	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
+	if (shared->heap_info.free_offset != last_heap_free) {
+		last_heap_free = shared->heap_info.free_offset;
+		schedule_work(&probe_work);
+	}
+}
+
+static void smd_state_change(struct smd_channel *ch,
+			     unsigned last, unsigned next)
+{
+	ch->last_state = next;
+
+	pr_info("SMD: ch %d %d -> %d\n", ch->n, last, next);
+
+	switch (next) {
+	case SMD_SS_OPENING:
+		ch->recv->tail = 0;
+	case SMD_SS_OPENED:
+		if (ch->send->state != SMD_SS_OPENED)
+			ch_set_state(ch, SMD_SS_OPENED);
+		ch->notify(ch->priv, SMD_EVENT_OPEN);
+		break;
+	case SMD_SS_FLUSHING:
+	case SMD_SS_RESET:
+		/* we should force them to close? */
+	default:
+		ch->notify(ch->priv, SMD_EVENT_CLOSE);
+	}
+}
+
+static void handle_smd_irq(struct list_head *list, void (*notify)(void))
+{
+	unsigned long flags;
+	struct smd_channel *ch;
+	int do_notify = 0;
+	unsigned ch_flags;
+	unsigned tmp;
+
+	spin_lock_irqsave(&smd_lock, flags);
+	list_for_each_entry(ch, list, ch_list) {
+		ch_flags = 0;
+		if (ch_is_open(ch)) {
+			if (ch->recv->fHEAD) {
+				ch->recv->fHEAD = 0;
+				ch_flags |= 1;
+				do_notify |= 1;
+			}
+			if (ch->recv->fTAIL) {
+				ch->recv->fTAIL = 0;
+				ch_flags |= 2;
+				do_notify |= 1;
+			}
+			if (ch->recv->fSTATE) {
+				ch->recv->fSTATE = 0;
+				ch_flags |= 4;
+				do_notify |= 1;
+			}
+		}
+		tmp = ch->recv->state;
+		if (tmp != ch->last_state)
+			smd_state_change(ch, ch->last_state, tmp);
+		if (ch_flags) {
+			ch->update_state(ch);
+			ch->notify(ch->priv, SMD_EVENT_DATA);
+		}
+	}
+	if (do_notify)
+		notify();
+	spin_unlock_irqrestore(&smd_lock, flags);
+	do_smd_probe();
+}
+
+static irqreturn_t smd_modem_irq_handler(int irq, void *data)
+{
+	handle_smd_irq(&smd_ch_list_modem, notify_modem_smd);
+	return IRQ_HANDLED;
+}
+
+#if defined(CONFIG_QDSP6)
+static irqreturn_t smd_dsp_irq_handler(int irq, void *data)
+{
+	handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd);
+	return IRQ_HANDLED;
+}
+#endif
+
+static void smd_fake_irq_handler(unsigned long arg)
+{
+	handle_smd_irq(&smd_ch_list_modem, notify_modem_smd);
+	handle_smd_irq(&smd_ch_list_dsp, notify_dsp_smd);
+}
+
+static DECLARE_TASKLET(smd_fake_irq_tasklet, smd_fake_irq_handler, 0);
+
+static inline int smd_need_int(struct smd_channel *ch)
+{
+	if (ch_is_open(ch)) {
+		if (ch->recv->fHEAD || ch->recv->fTAIL || ch->recv->fSTATE)
+			return 1;
+		if (ch->recv->state != ch->last_state)
+			return 1;
+	}
+	return 0;
+}
+
+void smd_sleep_exit(void)
+{
+	unsigned long flags;
+	struct smd_channel *ch;
+	int need_int = 0;
+
+	spin_lock_irqsave(&smd_lock, flags);
+	list_for_each_entry(ch, &smd_ch_list_modem, ch_list) {
+		if (smd_need_int(ch)) {
+			need_int = 1;
+			break;
+		}
+	}
+	list_for_each_entry(ch, &smd_ch_list_dsp, ch_list) {
+		if (smd_need_int(ch)) {
+			need_int = 1;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&smd_lock, flags);
+	do_smd_probe();
+
+	if (need_int) {
+		if (msm_smd_debug_mask & MSM_SMD_DEBUG)
+			pr_info("smd_sleep_exit need interrupt\n");
+		tasklet_schedule(&smd_fake_irq_tasklet);
+	}
+}
+
+
+void smd_kick(smd_channel_t *ch)
+{
+	unsigned long flags;
+	unsigned tmp;
+
+	spin_lock_irqsave(&smd_lock, flags);
+	ch->update_state(ch);
+	tmp = ch->recv->state;
+	if (tmp != ch->last_state) {
+		ch->last_state = tmp;
+		if (tmp == SMD_SS_OPENED)
+			ch->notify(ch->priv, SMD_EVENT_OPEN);
+		else
+			ch->notify(ch->priv, SMD_EVENT_CLOSE);
+	}
+	ch->notify(ch->priv, SMD_EVENT_DATA);
+	ch->notify_other_cpu();
+	spin_unlock_irqrestore(&smd_lock, flags);
+}
+
+static int smd_is_packet(int chn, unsigned type)
+{
+	type &= SMD_KIND_MASK;
+	if (type == SMD_KIND_PACKET)
+		return 1;
+	if (type == SMD_KIND_STREAM)
+		return 0;
+
+	/* older AMSS reports SMD_KIND_UNKNOWN always */
+	if ((chn > 4) || (chn == 1))
+		return 1;
+	else
+		return 0;
+}
+
+static int smd_stream_write(smd_channel_t *ch, const void *_data, int len)
+{
+	void *ptr;
+	const unsigned char *buf = _data;
+	unsigned xfer;
+	int orig_len = len;
+
+	if (len < 0)
+		return -EINVAL;
+
+	while ((xfer = ch_write_buffer(ch, &ptr)) != 0) {
+		if (!ch_is_open(ch))
+			break;
+		if (xfer > len)
+			xfer = len;
+		memcpy(ptr, buf, xfer);
+		ch_write_done(ch, xfer);
+		len -= xfer;
+		buf += xfer;
+		if (len == 0)
+			break;
+	}
+
+	ch->notify_other_cpu();
+
+	return orig_len - len;
+}
+
+static int smd_packet_write(smd_channel_t *ch, const void *_data, int len)
+{
+	unsigned hdr[5];
+
+	if (len < 0)
+		return -EINVAL;
+
+	if (smd_stream_write_avail(ch) < (len + SMD_HEADER_SIZE))
+		return -ENOMEM;
+
+	hdr[0] = len;
+	hdr[1] = hdr[2] = hdr[3] = hdr[4] = 0;
+
+	smd_stream_write(ch, hdr, sizeof(hdr));
+	smd_stream_write(ch, _data, len);
+
+	return len;
+}
+
+static int smd_stream_read(smd_channel_t *ch, void *data, int len)
+{
+	int r;
+
+	if (len < 0)
+		return -EINVAL;
+
+	r = ch_read(ch, data, len);
+	if (r > 0)
+		ch->notify_other_cpu();
+
+	return r;
+}
+
+static int smd_packet_read(smd_channel_t *ch, void *data, int len)
+{
+	unsigned long flags;
+	int r;
+
+	if (len < 0)
+		return -EINVAL;
+
+	if (len > ch->current_packet)
+		len = ch->current_packet;
+
+	r = ch_read(ch, data, len);
+	if (r > 0)
+		ch->notify_other_cpu();
+
+	spin_lock_irqsave(&smd_lock, flags);
+	ch->current_packet -= r;
+	update_packet_state(ch);
+	spin_unlock_irqrestore(&smd_lock, flags);
+
+	return r;
+}
+
+static int smd_alloc_channel(const char *name, uint32_t cid, uint32_t type)
+{
+	struct smd_channel *ch;
+
+	ch = kzalloc(sizeof(struct smd_channel), GFP_KERNEL);
+	if (ch == 0) {
+		pr_err("smd_alloc_channel() out of memory\n");
+		return -1;
+	}
+	ch->n = cid;
+
+	if (_smd_alloc_channel(ch)) {
+		kfree(ch);
+		return -1;
+	}
+
+	ch->fifo_mask = ch->fifo_size - 1;
+	ch->type = type;
+
+	if ((type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM)
+		ch->notify_other_cpu = notify_modem_smd;
+	else
+		ch->notify_other_cpu = notify_dsp_smd;
+
+	if (smd_is_packet(cid, type)) {
+		ch->read = smd_packet_read;
+		ch->write = smd_packet_write;
+		ch->read_avail = smd_packet_read_avail;
+		ch->write_avail = smd_packet_write_avail;
+		ch->update_state = update_packet_state;
+	} else {
+		ch->read = smd_stream_read;
+		ch->write = smd_stream_write;
+		ch->read_avail = smd_stream_read_avail;
+		ch->write_avail = smd_stream_write_avail;
+		ch->update_state = update_stream_state;
+	}
+
+	if ((type & 0xff) == 0)
+		memcpy(ch->name, "SMD_", 4);
+	else
+		memcpy(ch->name, "DSP_", 4);
+	memcpy(ch->name + 4, name, 20);
+	ch->name[23] = 0;
+	ch->pdev.name = ch->name;
+	ch->pdev.id = -1;
+
+	pr_info("smd_alloc_channel() cid=%02d size=%05d '%s'\n",
+		ch->n, ch->fifo_size, ch->name);
+
+	mutex_lock(&smd_creation_mutex);
+	list_add(&ch->ch_list, &smd_ch_closed_list);
+	mutex_unlock(&smd_creation_mutex);
+
+	platform_device_register(&ch->pdev);
+	return 0;
+}
+
+static void smd_channel_probe_worker(struct work_struct *work)
+{
+	struct smd_alloc_elm *shared;
+	unsigned ctype;
+	unsigned type;
+	unsigned n;
+
+	shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64);
+	if (!shared) {
+		pr_err("smd: cannot find allocation table\n");
+		return;
+	}
+	for (n = 0; n < 64; n++) {
+		if (smd_ch_allocated[n])
+			continue;
+		if (!shared[n].ref_count)
+			continue;
+		if (!shared[n].name[0])
+			continue;
+		ctype = shared[n].ctype;
+		type = ctype & SMD_TYPE_MASK;
+
+		/* DAL channels are stream but neither the modem,
+		 * nor the DSP correctly indicate this.  Fixup manually.
+		 */
+		if (!memcmp(shared[n].name, "DAL", 3))
+			ctype = (ctype & (~SMD_KIND_MASK)) | SMD_KIND_STREAM;
+
+		type = shared[n].ctype & SMD_TYPE_MASK;
+		if ((type == SMD_TYPE_APPS_MODEM) ||
+		    (type == SMD_TYPE_APPS_DSP))
+			if (!smd_alloc_channel(shared[n].name, shared[n].cid, ctype))
+				smd_ch_allocated[n] = 1;
+	}
+}
+
+static void do_nothing_notify(void *priv, unsigned flags)
+{
+}
+
+struct smd_channel *smd_get_channel(const char *name)
+{
+	struct smd_channel *ch;
+
+	mutex_lock(&smd_creation_mutex);
+	list_for_each_entry(ch, &smd_ch_closed_list, ch_list) {
+		if (!strcmp(name, ch->name)) {
+			list_del(&ch->ch_list);
+			mutex_unlock(&smd_creation_mutex);
+			return ch;
+		}
+	}
+	mutex_unlock(&smd_creation_mutex);
+
+	return NULL;
+}
+
+int smd_open(const char *name, smd_channel_t **_ch,
+	     void *priv, void (*notify)(void *, unsigned))
+{
+	struct smd_channel *ch;
+	unsigned long flags;
+
+	if (smd_initialized == 0) {
+		pr_info("smd_open() before smd_init()\n");
+		return -ENODEV;
+	}
+
+	ch = smd_get_channel(name);
+	if (!ch)
+		return -ENODEV;
+
+	if (notify == 0)
+		notify = do_nothing_notify;
+
+	ch->notify = notify;
+	ch->current_packet = 0;
+	ch->last_state = SMD_SS_CLOSED;
+	ch->priv = priv;
+
+	*_ch = ch;
+
+	spin_lock_irqsave(&smd_lock, flags);
+
+	if ((ch->type & SMD_TYPE_MASK) == SMD_TYPE_APPS_MODEM)
+		list_add(&ch->ch_list, &smd_ch_list_modem);
+	else
+		list_add(&ch->ch_list, &smd_ch_list_dsp);
+
+	/* If the remote side is CLOSING, we need to get it to
+	 * move to OPENING (which we'll do by moving from CLOSED to
+	 * OPENING) and then get it to move from OPENING to
+	 * OPENED (by doing the same state change ourselves).
+	 *
+	 * Otherwise, it should be OPENING and we can move directly
+	 * to OPENED so that it will follow.
+	 */
+	if (ch->recv->state == SMD_SS_CLOSING) {
+		ch->send->head = 0;
+		ch_set_state(ch, SMD_SS_OPENING);
+	} else {
+		ch_set_state(ch, SMD_SS_OPENED);
+	}
+	spin_unlock_irqrestore(&smd_lock, flags);
+	smd_kick(ch);
+
+	return 0;
+}
+
+int smd_close(smd_channel_t *ch)
+{
+	unsigned long flags;
+
+	pr_info("smd_close(%p)\n", ch);
+
+	if (ch == 0)
+		return -1;
+
+	spin_lock_irqsave(&smd_lock, flags);
+	ch->notify = do_nothing_notify;
+	list_del(&ch->ch_list);
+	ch_set_state(ch, SMD_SS_CLOSED);
+	spin_unlock_irqrestore(&smd_lock, flags);
+
+	mutex_lock(&smd_creation_mutex);
+	list_add(&ch->ch_list, &smd_ch_closed_list);
+	mutex_unlock(&smd_creation_mutex);
+
+	return 0;
+}
+
+int smd_read(smd_channel_t *ch, void *data, int len)
+{
+	return ch->read(ch, data, len);
+}
+
+int smd_write(smd_channel_t *ch, const void *data, int len)
+{
+	return ch->write(ch, data, len);
+}
+
+int smd_write_atomic(smd_channel_t *ch, const void *data, int len)
+{
+	unsigned long flags;
+	int res;
+	spin_lock_irqsave(&smd_lock, flags);
+	res = ch->write(ch, data, len);
+	spin_unlock_irqrestore(&smd_lock, flags);
+	return res;
+}
+
+int smd_read_avail(smd_channel_t *ch)
+{
+	return ch->read_avail(ch);
+}
+
+int smd_write_avail(smd_channel_t *ch)
+{
+	return ch->write_avail(ch);
+}
+
+int smd_wait_until_readable(smd_channel_t *ch, int bytes)
+{
+	return -1;
+}
+
+int smd_wait_until_writable(smd_channel_t *ch, int bytes)
+{
+	return -1;
+}
+
+int smd_cur_packet_size(smd_channel_t *ch)
+{
+	return ch->current_packet;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+void *smem_alloc(unsigned id, unsigned size)
+{
+	return smem_find(id, size);
+}
+
+void *smem_item(unsigned id, unsigned *size)
+{
+	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
+	struct smem_heap_entry *toc = shared->heap_toc;
+
+	if (id >= SMEM_NUM_ITEMS)
+		return 0;
+
+	if (toc[id].allocated) {
+		*size = toc[id].size;
+		return (void *) (MSM_SHARED_RAM_BASE + toc[id].offset);
+	} else {
+		*size = 0;
+	}
+
+	return 0;
+}
+
+void *smem_find(unsigned id, unsigned size_in)
+{
+	unsigned size;
+	void *ptr;
+
+	ptr = smem_item(id, &size);
+	if (!ptr)
+		return 0;
+
+	size_in = ALIGN(size_in, 8);
+	if (size_in != size) {
+		pr_err("smem_find(%d, %d): wrong size %d\n",
+		       id, size_in, size);
+		return 0;
+	}
+
+	return ptr;
+}
+
+static irqreturn_t smsm_irq_handler(int irq, void *data)
+{
+	unsigned long flags;
+	unsigned apps, modm;
+
+	spin_lock_irqsave(&smem_lock, flags);
+
+	apps = raw_smsm_get_state(SMSM_STATE_APPS);
+	modm = raw_smsm_get_state(SMSM_STATE_MODEM);
+
+	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
+		pr_info("<SM %08x %08x>\n", apps, modm);
+	if (modm & SMSM_RESET)
+		handle_modem_crash();
+
+	do_smd_probe();
+
+	spin_unlock_irqrestore(&smem_lock, flags);
+	return IRQ_HANDLED;
+}
+
+int smsm_change_state(enum smsm_state_item item,
+		      uint32_t clear_mask, uint32_t set_mask)
+{
+	unsigned long addr = smd_info.state + item * 4;
+	unsigned long flags;
+	unsigned state;
+
+	if (!smd_info.ready)
+		return -EIO;
+
+	spin_lock_irqsave(&smem_lock, flags);
+
+	if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET)
+		handle_modem_crash();
+
+	state = (readl(addr) & ~clear_mask) | set_mask;
+	writel(state, addr);
+
+	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
+		pr_info("smsm_change_state %d %x\n", item, state);
+	notify_other_smsm();
+
+	spin_unlock_irqrestore(&smem_lock, flags);
+
+	return 0;
+}
+
+uint32_t smsm_get_state(enum smsm_state_item item)
+{
+	unsigned long flags;
+	uint32_t rv;
+
+	spin_lock_irqsave(&smem_lock, flags);
+
+	rv = readl(smd_info.state + item * 4);
+
+	if (item == SMSM_STATE_MODEM && (rv & SMSM_RESET))
+		handle_modem_crash();
+
+	spin_unlock_irqrestore(&smem_lock, flags);
+
+	return rv;
+}
+
+#ifdef CONFIG_ARCH_MSM_SCORPION
+
+int smsm_set_sleep_duration(uint32_t delay)
+{
+	struct msm_dem_slave_data *ptr;
+
+	ptr = smem_find(SMEM_APPS_DEM_SLAVE_DATA, sizeof(*ptr));
+	if (ptr == NULL) {
+		pr_err("smsm_set_sleep_duration <SM NO APPS_DEM_SLAVE_DATA>\n");
+		return -EIO;
+	}
+	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
+		pr_info("smsm_set_sleep_duration %d -> %d\n",
+		       ptr->sleep_time, delay);
+	ptr->sleep_time = delay;
+	return 0;
+}
+
+#else
+
+int smsm_set_sleep_duration(uint32_t delay)
+{
+	uint32_t *ptr;
+
+	ptr = smem_find(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr));
+	if (ptr == NULL) {
+		pr_err("smsm_set_sleep_duration <SM NO SLEEP_DELAY>\n");
+		return -EIO;
+	}
+	if (msm_smd_debug_mask & MSM_SMSM_DEBUG)
+		pr_info("smsm_set_sleep_duration %d -> %d\n",
+		       *ptr, delay);
+	*ptr = delay;
+	return 0;
+}
+
+#endif
+
+int smd_core_init(void)
+{
+	int r;
+	pr_info("smd_core_init()\n");
+
+	/* wait for essential items to be initialized */
+	for (;;) {
+		unsigned size;
+		void *state;
+		state = smem_item(SMEM_SMSM_SHARED_STATE, &size);
+		if (size == SMSM_V1_SIZE || size == SMSM_V2_SIZE) {
+			smd_info.state = (unsigned)state;
+			break;
+		}
+	}
+
+	smd_info.ready = 1;
+
+	r = request_irq(INT_A9_M2A_0, smd_modem_irq_handler,
+			IRQF_TRIGGER_RISING, "smd_dev", 0);
+	if (r < 0)
+		return r;
+	r = enable_irq_wake(INT_A9_M2A_0);
+	if (r < 0)
+		pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_0\n");
+
+	r = request_irq(INT_A9_M2A_5, smsm_irq_handler,
+			IRQF_TRIGGER_RISING, "smsm_dev", 0);
+	if (r < 0) {
+		free_irq(INT_A9_M2A_0, 0);
+		return r;
+	}
+	r = enable_irq_wake(INT_A9_M2A_5);
+	if (r < 0)
+		pr_err("smd_core_init: enable_irq_wake failed for A9_M2A_5\n");
+
+#if defined(CONFIG_QDSP6)
+	r = request_irq(INT_ADSP_A11, smd_dsp_irq_handler,
+			IRQF_TRIGGER_RISING, "smd_dsp", 0);
+	if (r < 0) {
+		free_irq(INT_A9_M2A_0, 0);
+		free_irq(INT_A9_M2A_5, 0);
+		return r;
+	}
+#endif
+
+	/* check for any SMD channels that may already exist */
+	do_smd_probe();
+
+	/* indicate that we're up and running */
+	smsm_change_state(SMSM_STATE_APPS,
+			  ~0, SMSM_INIT | SMSM_SMDINIT | SMSM_RPCINIT | SMSM_RUN);
+#ifdef CONFIG_ARCH_MSM_SCORPION
+	smsm_change_state(SMSM_STATE_APPS_DEM, ~0, 0);
+#endif
+
+	pr_info("smd_core_init() done\n");
+
+	return 0;
+}
+
+static int __init msm_smd_probe(struct platform_device *pdev)
+{
+	pr_info("smd_init()\n");
+
+	/*
+	 * If we haven't waited for the ARM9 to boot up till now,
+	 * then we need to wait here. Otherwise this should just
+	 * return immediately.
+	 */
+	proc_comm_boot_wait();
+
+	INIT_WORK(&probe_work, smd_channel_probe_worker);
+
+	if (smd_core_init()) {
+		pr_err("smd_core_init() failed\n");
+		return -1;
+	}
+
+	do_smd_probe();
+
+	msm_check_for_modem_crash = check_for_modem_crash;
+
+	msm_init_last_radio_log(THIS_MODULE);
+
+	smd_initialized = 1;
+
+	return 0;
+}
+
+static struct platform_driver msm_smd_driver = {
+	.probe = msm_smd_probe,
+	.driver = {
+		.name = MODULE_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init msm_smd_init(void)
+{
+	return platform_driver_register(&msm_smd_driver);
+}
+
+module_init(msm_smd_init);
+
+MODULE_DESCRIPTION("MSM Shared Memory Core");
+MODULE_AUTHOR("Brian Swetland <swetland@google.com>");
+MODULE_LICENSE("GPL");
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/smd_debug.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/smd_debug.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/smd_debug.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/smd_debug.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,315 @@
+/* arch/arm/mach-msm/smd_debug.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/debugfs.h>
+#include <linux/list.h>
+
+#include <mach/msm_iomap.h>
+
+#include "smd_private.h"
+
+#if defined(CONFIG_DEBUG_FS)
+
+static char *chstate(unsigned n)
+{
+	switch (n) {
+	case SMD_SS_CLOSED:
+		return "CLOSED";
+	case SMD_SS_OPENING:
+		return "OPENING";
+	case SMD_SS_OPENED:
+		return "OPENED";
+	case SMD_SS_FLUSHING:
+		return "FLUSHING";
+	case SMD_SS_CLOSING:
+		return "CLOSING";
+	case SMD_SS_RESET:
+		return "RESET";
+	case SMD_SS_RESET_OPENING:
+		return "ROPENING";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+
+static int dump_ch(char *buf, int max, struct smd_channel *ch)
+{
+	volatile struct smd_half_channel *s = ch->send;
+	volatile struct smd_half_channel *r = ch->recv;
+
+	return scnprintf(
+		buf, max,
+		"ch%02d:"
+		" %8s(%05d/%05d) %c%c%c%c%c%c%c <->"
+		" %8s(%05d/%05d) %c%c%c%c%c%c%c '%s'\n", ch->n,
+		chstate(s->state), s->tail, s->head,
+		s->fDSR ? 'D' : 'd',
+		s->fCTS ? 'C' : 'c',
+		s->fCD ? 'C' : 'c',
+		s->fRI ? 'I' : 'i',
+		s->fHEAD ? 'W' : 'w',
+		s->fTAIL ? 'R' : 'r',
+		s->fSTATE ? 'S' : 's',
+		chstate(r->state), r->tail, r->head,
+		r->fDSR ? 'D' : 'd',
+		r->fCTS ? 'R' : 'r',
+		r->fCD ? 'C' : 'c',
+		r->fRI ? 'I' : 'i',
+		r->fHEAD ? 'W' : 'w',
+		r->fTAIL ? 'R' : 'r',
+		r->fSTATE ? 'S' : 's',
+		ch->name
+		);
+}
+
+static int debug_read_stat(char *buf, int max)
+{
+	char *msg;
+	int i = 0;
+
+	msg = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG);
+
+	if (raw_smsm_get_state(SMSM_STATE_MODEM) & SMSM_RESET)
+		i += scnprintf(buf + i, max - i,
+			       "smsm: ARM9 HAS CRASHED\n");
+
+	i += scnprintf(buf + i, max - i, "smsm: a9: %08x a11: %08x\n",
+		       raw_smsm_get_state(SMSM_STATE_MODEM),
+		       raw_smsm_get_state(SMSM_STATE_APPS));
+#ifdef CONFIG_ARCH_MSM_SCORPION
+	i += scnprintf(buf + i, max - i, "smsm dem: apps: %08x modem: %08x "
+		       "qdsp6: %08x power: %08x time: %08x\n",
+		       raw_smsm_get_state(SMSM_STATE_APPS_DEM),
+		       raw_smsm_get_state(SMSM_STATE_MODEM_DEM),
+		       raw_smsm_get_state(SMSM_STATE_QDSP6_DEM),
+		       raw_smsm_get_state(SMSM_STATE_POWER_MASTER_DEM),
+		       raw_smsm_get_state(SMSM_STATE_TIME_MASTER_DEM));
+#endif
+	if (msg) {
+		msg[SZ_DIAG_ERR_MSG - 1] = 0;
+		i += scnprintf(buf + i, max - i, "diag: '%s'\n", msg);
+	}
+	return i;
+}
+
+static int debug_read_mem(char *buf, int max)
+{
+	unsigned n;
+	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
+	struct smem_heap_entry *toc = shared->heap_toc;
+	int i = 0;
+
+	i += scnprintf(buf + i, max - i,
+		       "heap: init=%d free=%d remain=%d\n",
+		       shared->heap_info.initialized,
+		       shared->heap_info.free_offset,
+		       shared->heap_info.heap_remaining);
+
+	for (n = 0; n < SMEM_NUM_ITEMS; n++) {
+		if (toc[n].allocated == 0)
+			continue;
+		i += scnprintf(buf + i, max - i,
+			       "%04d: offset %08x size %08x\n",
+			       n, toc[n].offset, toc[n].size);
+	}
+	return i;
+}
+
+static int debug_read_ch(char *buf, int max)
+{
+	struct smd_channel *ch;
+	unsigned long flags;
+	int i = 0;
+
+	spin_lock_irqsave(&smd_lock, flags);
+	list_for_each_entry(ch, &smd_ch_list_dsp, ch_list)
+		i += dump_ch(buf + i, max - i, ch);
+	list_for_each_entry(ch, &smd_ch_list_modem, ch_list)
+		i += dump_ch(buf + i, max - i, ch);
+	list_for_each_entry(ch, &smd_ch_closed_list, ch_list)
+		i += dump_ch(buf + i, max - i, ch);
+	spin_unlock_irqrestore(&smd_lock, flags);
+
+	return i;
+}
+
+static int debug_read_version(char *buf, int max)
+{
+	struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE;
+	unsigned version = shared->version[VERSION_MODEM];
+	return sprintf(buf, "%d.%d\n", version >> 16, version & 0xffff);
+}
+
+static int debug_read_build_id(char *buf, int max)
+{
+	unsigned size;
+	void *data;
+
+	data = smem_item(SMEM_HW_SW_BUILD_ID, &size);
+	if (!data)
+		return 0;
+
+	if (size >= max)
+		size = max;
+	memcpy(buf, data, size);
+
+	return size;
+}
+
+static int debug_read_alloc_tbl(char *buf, int max)
+{
+	struct smd_alloc_elm *shared;
+	int n, i = 0;
+
+	shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64);
+
+	for (n = 0; n < 64; n++) {
+		if (shared[n].ref_count == 0)
+			continue;
+		i += scnprintf(buf + i, max - i,
+			       "%03d: %-20s cid=%02d type=%03d "
+			       "kind=%02d ref_count=%d\n",
+			       n, shared[n].name, shared[n].cid,
+			       shared[n].ctype & 0xff,
+			       (shared[n].ctype >> 8) & 0xf,
+			       shared[n].ref_count);
+	}
+
+	return i;
+}
+
+#define DEBUG_BUFMAX 4096
+static char debug_buffer[DEBUG_BUFMAX];
+
+static ssize_t debug_read(struct file *file, char __user *buf,
+			  size_t count, loff_t *ppos)
+{
+	int (*fill)(char *buf, int max) = file->private_data;
+	int bsize = fill(debug_buffer, DEBUG_BUFMAX);
+	return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize);
+}
+
+static int debug_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+static const struct file_operations debug_ops = {
+	.read = debug_read,
+	.open = debug_open,
+};
+
+static void debug_create(const char *name, mode_t mode,
+			 struct dentry *dent,
+			 int (*fill)(char *buf, int max))
+{
+	debugfs_create_file(name, mode, dent, fill, &debug_ops);
+}
+
+static int smd_debugfs_init(void)
+{
+	struct dentry *dent;
+
+	dent = debugfs_create_dir("smd", 0);
+	if (IS_ERR(dent))
+		return 1;
+
+	debug_create("ch", 0444, dent, debug_read_ch);
+	debug_create("stat", 0444, dent, debug_read_stat);
+	debug_create("mem", 0444, dent, debug_read_mem);
+	debug_create("version", 0444, dent, debug_read_version);
+	debug_create("tbl", 0444, dent, debug_read_alloc_tbl);
+	debug_create("build", 0444, dent, debug_read_build_id);
+
+	return 0;
+}
+
+late_initcall(smd_debugfs_init);
+#endif
+
+
+#define MAX_NUM_SLEEP_CLIENTS		64
+#define MAX_SLEEP_NAME_LEN		8
+
+#define NUM_GPIO_INT_REGISTERS		6
+#define GPIO_SMEM_NUM_GROUPS		2
+#define GPIO_SMEM_MAX_PC_INTERRUPTS	8
+
+struct tramp_gpio_save {
+	unsigned int enable;
+	unsigned int detect;
+	unsigned int polarity;
+};
+
+struct tramp_gpio_smem {
+	uint16_t num_fired[GPIO_SMEM_NUM_GROUPS];
+	uint16_t fired[GPIO_SMEM_NUM_GROUPS][GPIO_SMEM_MAX_PC_INTERRUPTS];
+	uint32_t enabled[NUM_GPIO_INT_REGISTERS];
+	uint32_t detection[NUM_GPIO_INT_REGISTERS];
+	uint32_t polarity[NUM_GPIO_INT_REGISTERS];
+};
+
+
+void smsm_print_sleep_info(void)
+{
+	unsigned long flags;
+	uint32_t *ptr;
+	struct tramp_gpio_smem *gpio;
+	struct smsm_interrupt_info *int_info;
+
+
+	spin_lock_irqsave(&smem_lock, flags);
+
+	ptr = smem_alloc(SMEM_SMSM_SLEEP_DELAY, sizeof(*ptr));
+	if (ptr)
+		pr_info("SMEM_SMSM_SLEEP_DELAY: %x\n", *ptr);
+
+	ptr = smem_alloc(SMEM_SMSM_LIMIT_SLEEP, sizeof(*ptr));
+	if (ptr)
+		pr_info("SMEM_SMSM_LIMIT_SLEEP: %x\n", *ptr);
+
+	ptr = smem_alloc(SMEM_SLEEP_POWER_COLLAPSE_DISABLED, sizeof(*ptr));
+	if (ptr)
+		pr_info("SMEM_SLEEP_POWER_COLLAPSE_DISABLED: %x\n", *ptr);
+
+#ifndef CONFIG_ARCH_MSM_SCORPION
+	int_info = smem_alloc(SMEM_SMSM_INT_INFO, sizeof(*int_info));
+	if (int_info)
+		pr_info("SMEM_SMSM_INT_INFO %x %x %x\n",
+			int_info->interrupt_mask,
+			int_info->pending_interrupts,
+			int_info->wakeup_reason);
+
+	gpio = smem_alloc(SMEM_GPIO_INT, sizeof(*gpio));
+	if (gpio) {
+		int i;
+		for (i = 0; i < NUM_GPIO_INT_REGISTERS; i++)
+			pr_info("SMEM_GPIO_INT: %d: e %x d %x p %x\n",
+				i, gpio->enabled[i], gpio->detection[i],
+				gpio->polarity[i]);
+
+		for (i = 0; i < GPIO_SMEM_NUM_GROUPS; i++)
+			pr_info("SMEM_GPIO_INT: %d: f %d: %d %d...\n",
+				i, gpio->num_fired[i], gpio->fired[i][0],
+				gpio->fired[i][1]);
+	}
+#else
+#endif
+	spin_unlock_irqrestore(&smem_lock, flags);
+}
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/smd_private.h linux-libre-2.6.35-gnu/arch/arm/mach-msm/smd_private.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/smd_private.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/smd_private.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,403 @@
+/* arch/arm/mach-msm/smd_private.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2007 QUALCOMM Incorporated
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_
+#define _ARCH_ARM_MACH_MSM_MSM_SMD_PRIVATE_H_
+
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/io.h>
+
+#include <mach/msm_iomap.h>
+
+struct smem_heap_info {
+	unsigned initialized;
+	unsigned free_offset;
+	unsigned heap_remaining;
+	unsigned reserved;
+};
+
+struct smem_heap_entry {
+	unsigned allocated;
+	unsigned offset;
+	unsigned size;
+	unsigned reserved;
+};
+
+struct smem_proc_comm {
+	unsigned command;
+	unsigned status;
+	unsigned data1;
+	unsigned data2;
+};
+
+#define PC_APPS  0
+#define PC_MODEM 1
+
+#define VERSION_SMD       0
+#define VERSION_QDSP6     4
+#define VERSION_APPS_SBL  6
+#define VERSION_MODEM_SBL 7
+#define VERSION_APPS      8
+#define VERSION_MODEM     9
+
+struct smem_shared {
+	struct smem_proc_comm proc_comm[4];
+	unsigned version[32];
+	struct smem_heap_info heap_info;
+	struct smem_heap_entry heap_toc[512];
+};
+
+#define SMSM_V1_SIZE		(sizeof(unsigned) * 8)
+#define SMSM_V2_SIZE		(sizeof(unsigned) * 4)
+
+#ifdef CONFIG_MSM_SMD_PKG3
+struct smsm_interrupt_info {
+	uint32_t interrupt_mask;
+	uint32_t pending_interrupts;
+	uint32_t wakeup_reason;
+};
+#else
+#define DEM_MAX_PORT_NAME_LEN (20)
+struct msm_dem_slave_data {
+	uint32_t sleep_time;
+	uint32_t interrupt_mask;
+	uint32_t resources_used;
+	uint32_t reserved1;
+
+	uint32_t wakeup_reason;
+	uint32_t pending_interrupts;
+	uint32_t rpc_prog;
+	uint32_t rpc_proc;
+	char     smd_port_name[DEM_MAX_PORT_NAME_LEN];
+	uint32_t reserved2;
+};
+#endif
+
+#define SZ_DIAG_ERR_MSG 0xC8
+#define ID_DIAG_ERR_MSG SMEM_DIAG_ERR_MESSAGE
+#define ID_SMD_CHANNELS SMEM_SMD_BASE_ID
+#define ID_SHARED_STATE SMEM_SMSM_SHARED_STATE
+#define ID_CH_ALLOC_TBL SMEM_CHANNEL_ALLOC_TBL
+
+#define SMSM_INIT		0x00000001
+#define SMSM_SMDINIT		0x00000008
+#define SMSM_RPCINIT		0x00000020
+#define SMSM_RESET		0x00000040
+#define SMSM_RSA		0x00000080
+#define SMSM_RUN		0x00000100
+#define SMSM_PWRC		0x00000200
+#define SMSM_TIMEWAIT		0x00000400
+#define SMSM_TIMEINIT		0x00000800
+#define SMSM_PWRC_EARLY_EXIT	0x00001000
+#define SMSM_WFPI		0x00002000
+#define SMSM_SLEEP		0x00004000
+#define SMSM_SLEEPEXIT		0x00008000
+#define SMSM_APPS_REBOOT	0x00020000
+#define SMSM_SYSTEM_POWER_DOWN	0x00040000
+#define SMSM_SYSTEM_REBOOT	0x00080000
+#define SMSM_SYSTEM_DOWNLOAD	0x00100000
+#define SMSM_PWRC_SUSPEND	0x00200000
+#define SMSM_APPS_SHUTDOWN	0x00400000
+#define SMSM_SMD_LOOPBACK	0x00800000
+#define SMSM_RUN_QUIET		0x01000000
+#define SMSM_MODEM_WAIT		0x02000000
+#define SMSM_MODEM_BREAK	0x04000000
+#define SMSM_MODEM_CONTINUE	0x08000000
+#define SMSM_UNKNOWN		0x80000000
+
+#define SMSM_WKUP_REASON_RPC	0x00000001
+#define SMSM_WKUP_REASON_INT	0x00000002
+#define SMSM_WKUP_REASON_GPIO	0x00000004
+#define SMSM_WKUP_REASON_TIMER	0x00000008
+#define SMSM_WKUP_REASON_ALARM	0x00000010
+#define SMSM_WKUP_REASON_RESET	0x00000020
+
+#ifdef CONFIG_ARCH_MSM7X00A
+enum smsm_state_item {
+	SMSM_STATE_APPS = 1,
+	SMSM_STATE_MODEM = 3,
+	SMSM_STATE_COUNT,
+};
+#else
+enum smsm_state_item {
+	SMSM_STATE_APPS,
+	SMSM_STATE_MODEM,
+	SMSM_STATE_HEXAGON,
+	SMSM_STATE_APPS_DEM,
+	SMSM_STATE_MODEM_DEM,
+	SMSM_STATE_QDSP6_DEM,
+	SMSM_STATE_POWER_MASTER_DEM,
+	SMSM_STATE_TIME_MASTER_DEM,
+	SMSM_STATE_COUNT,
+};
+#endif
+
+void *smem_alloc(unsigned id, unsigned size);
+int smsm_change_state(enum smsm_state_item item, uint32_t clear_mask, uint32_t set_mask);
+uint32_t smsm_get_state(enum smsm_state_item item);
+int smsm_set_sleep_duration(uint32_t delay);
+void smsm_print_sleep_info(void);
+
+#define SMEM_NUM_SMD_CHANNELS        64
+
+typedef enum {
+	/* fixed items */
+	SMEM_PROC_COMM = 0,
+	SMEM_HEAP_INFO,
+	SMEM_ALLOCATION_TABLE,
+	SMEM_VERSION_INFO,
+	SMEM_HW_RESET_DETECT,
+	SMEM_AARM_WARM_BOOT,
+	SMEM_DIAG_ERR_MESSAGE,
+	SMEM_SPINLOCK_ARRAY,
+	SMEM_MEMORY_BARRIER_LOCATION,
+
+	/* dynamic items */
+	SMEM_AARM_PARTITION_TABLE,
+	SMEM_AARM_BAD_BLOCK_TABLE,
+	SMEM_RESERVE_BAD_BLOCKS,
+	SMEM_WM_UUID,
+	SMEM_CHANNEL_ALLOC_TBL,
+	SMEM_SMD_BASE_ID,
+	SMEM_SMEM_LOG_IDX = SMEM_SMD_BASE_ID + SMEM_NUM_SMD_CHANNELS,
+	SMEM_SMEM_LOG_EVENTS,
+	SMEM_SMEM_STATIC_LOG_IDX,
+	SMEM_SMEM_STATIC_LOG_EVENTS,
+	SMEM_SMEM_SLOW_CLOCK_SYNC,
+	SMEM_SMEM_SLOW_CLOCK_VALUE,
+	SMEM_BIO_LED_BUF,
+	SMEM_SMSM_SHARED_STATE,
+	SMEM_SMSM_INT_INFO,
+	SMEM_SMSM_SLEEP_DELAY,
+	SMEM_SMSM_LIMIT_SLEEP,
+	SMEM_SLEEP_POWER_COLLAPSE_DISABLED,
+	SMEM_KEYPAD_KEYS_PRESSED,
+	SMEM_KEYPAD_STATE_UPDATED,
+	SMEM_KEYPAD_STATE_IDX,
+	SMEM_GPIO_INT,
+	SMEM_MDDI_LCD_IDX,
+	SMEM_MDDI_HOST_DRIVER_STATE,
+	SMEM_MDDI_LCD_DISP_STATE,
+	SMEM_LCD_CUR_PANEL,
+	SMEM_MARM_BOOT_SEGMENT_INFO,
+	SMEM_AARM_BOOT_SEGMENT_INFO,
+	SMEM_SLEEP_STATIC,
+	SMEM_SCORPION_FREQUENCY,
+	SMEM_SMD_PROFILES,
+	SMEM_TSSC_BUSY,
+	SMEM_HS_SUSPEND_FILTER_INFO,
+	SMEM_BATT_INFO,
+	SMEM_APPS_BOOT_MODE,
+	SMEM_VERSION_FIRST,
+	SMEM_VERSION_LAST = SMEM_VERSION_FIRST + 24,
+	SMEM_OSS_RRCASN1_BUF1,
+	SMEM_OSS_RRCASN1_BUF2,
+	SMEM_ID_VENDOR0,
+	SMEM_ID_VENDOR1,
+	SMEM_ID_VENDOR2,
+	SMEM_HW_SW_BUILD_ID,
+	SMEM_SMD_BLOCK_PORT_BASE_ID,
+	SMEM_SMD_BLOCK_PORT_PROC0_HEAP = SMEM_SMD_BLOCK_PORT_BASE_ID + SMEM_NUM_SMD_CHANNELS,
+	SMEM_SMD_BLOCK_PORT_PROC1_HEAP = SMEM_SMD_BLOCK_PORT_PROC0_HEAP + SMEM_NUM_SMD_CHANNELS,
+	SMEM_I2C_MUTEX = SMEM_SMD_BLOCK_PORT_PROC1_HEAP + SMEM_NUM_SMD_CHANNELS,
+	SMEM_SCLK_CONVERSION,
+	SMEM_SMD_SMSM_INTR_MUX,
+	SMEM_SMSM_CPU_INTR_MASK,
+	SMEM_APPS_DEM_SLAVE_DATA,
+	SMEM_QDSP6_DEM_SLAVE_DATA,
+	SMEM_CLKREGIM_BSP,
+	SMEM_CLKREGIM_SOURCES,
+	SMEM_SMD_FIFO_BASE_ID,
+	SMEM_USABLE_RAM_PARTITION_TABLE = SMEM_SMD_FIFO_BASE_ID + SMEM_NUM_SMD_CHANNELS,
+	SMEM_POWER_ON_STATUS_INFO,
+	SMEM_DAL_AREA,
+	SMEM_SMEM_LOG_POWER_IDX,
+	SMEM_SMEM_LOG_POWER_WRAP,
+	SMEM_SMEM_LOG_POWER_EVENTS,
+	SMEM_ERR_CRASH_LOG,
+	SMEM_ERR_F3_TRACE_LOG,
+	SMEM_NUM_ITEMS,
+} smem_mem_type;
+
+
+#define SMD_SS_CLOSED		0x00000000
+#define SMD_SS_OPENING		0x00000001
+#define SMD_SS_OPENED		0x00000002
+#define SMD_SS_FLUSHING		0x00000003
+#define SMD_SS_CLOSING		0x00000004
+#define SMD_SS_RESET		0x00000005
+#define SMD_SS_RESET_OPENING	0x00000006
+
+#define SMD_BUF_SIZE		8192
+#define SMD_CHANNELS		64
+
+#define SMD_HEADER_SIZE		20
+
+struct smd_alloc_elm {
+	char name[20];
+	uint32_t cid;
+	uint32_t ctype;
+	uint32_t ref_count;
+};
+
+struct smd_half_channel {
+	unsigned state;
+	unsigned char fDSR;
+	unsigned char fCTS;
+	unsigned char fCD;
+	unsigned char fRI;
+	unsigned char fHEAD;
+	unsigned char fTAIL;
+	unsigned char fSTATE;
+	unsigned char fUNUSED;
+	unsigned tail;
+	unsigned head;
+} __attribute__(( aligned(4), packed ));
+
+/* Only used on SMD package v3 on msm7201a */
+struct smd_shared_v1 {
+	struct smd_half_channel ch0;
+	unsigned char data0[SMD_BUF_SIZE];
+	struct smd_half_channel ch1;
+	unsigned char data1[SMD_BUF_SIZE];
+};
+
+/* Used on SMD package v4 */
+struct smd_shared_v2 {
+	struct smd_half_channel ch0;
+	struct smd_half_channel ch1;
+};
+
+struct smd_channel {
+	volatile struct smd_half_channel *send;
+	volatile struct smd_half_channel *recv;
+	unsigned char *send_data;
+	unsigned char *recv_data;
+
+	unsigned fifo_mask;
+	unsigned fifo_size;
+	unsigned current_packet;
+	unsigned n;
+
+	struct list_head ch_list;
+
+	void *priv;
+	void (*notify)(void *priv, unsigned flags);
+
+	int (*read)(struct smd_channel *ch, void *data, int len);
+	int (*write)(struct smd_channel *ch, const void *data, int len);
+	int (*read_avail)(struct smd_channel *ch);
+	int (*write_avail)(struct smd_channel *ch);
+
+	void (*update_state)(struct smd_channel *ch);
+	unsigned last_state;
+	void (*notify_other_cpu)(void);
+	unsigned type;
+
+	char name[32];
+	struct platform_device pdev;
+};
+
+#define SMD_TYPE_MASK		0x0FF
+#define SMD_TYPE_APPS_MODEM	0x000
+#define SMD_TYPE_APPS_DSP	0x001
+#define SMD_TYPE_MODEM_DSP	0x002
+
+#define SMD_KIND_MASK		0xF00
+#define SMD_KIND_UNKNOWN	0x000
+#define SMD_KIND_STREAM		0x100
+#define SMD_KIND_PACKET		0x200
+
+extern struct list_head smd_ch_closed_list;
+extern struct list_head smd_ch_list_modem;
+extern struct list_head smd_ch_list_dsp;
+
+extern spinlock_t smd_lock;
+extern spinlock_t smem_lock;
+
+void *smem_find(unsigned id, unsigned size);
+void *smem_item(unsigned id, unsigned *size);
+uint32_t raw_smsm_get_state(enum smsm_state_item item);
+
+extern void msm_init_last_radio_log(struct module *);
+
+#ifdef CONFIG_MSM_SMD_PKG3
+/*
+ * This allocator assumes an SMD Package v3 which only exists on
+ * MSM7x00 SoC's.
+ */
+static inline int _smd_alloc_channel(struct smd_channel *ch)
+{
+	struct smd_shared_v1 *shared1;
+
+	shared1 = smem_alloc(ID_SMD_CHANNELS + ch->n, sizeof(*shared1));
+	if (!shared1) {
+		pr_err("smd_alloc_channel() cid %d does not exist\n", ch->n);
+		return -1;
+	}
+	ch->send = &shared1->ch0;
+	ch->recv = &shared1->ch1;
+	ch->send_data = shared1->data0;
+	ch->recv_data = shared1->data1;
+	ch->fifo_size = SMD_BUF_SIZE;
+	return 0;
+}
+#else
+/*
+ * This allocator assumes an SMD Package v4, the most common
+ * and the default.
+ */
+static inline int _smd_alloc_channel(struct smd_channel *ch)
+{
+	struct smd_shared_v2 *shared2;
+	void *buffer;
+	unsigned buffer_sz;
+
+	shared2 = smem_alloc(SMEM_SMD_BASE_ID + ch->n, sizeof(*shared2));
+	buffer = smem_item(SMEM_SMD_FIFO_BASE_ID + ch->n, &buffer_sz);
+
+	if (!buffer)
+		return -1;
+
+	/* buffer must be a power-of-two size */
+	if (buffer_sz & (buffer_sz - 1))
+		return -1;
+
+	buffer_sz /= 2;
+	ch->send = &shared2->ch0;
+	ch->recv = &shared2->ch1;
+	ch->send_data = buffer;
+	ch->recv_data = buffer + buffer_sz;
+	ch->fifo_size = buffer_sz;
+	return 0;
+}
+#endif /* CONFIG_MSM_SMD_PKG3 */
+
+#if defined(CONFIG_ARCH_MSM7X30)
+static inline void msm_a2m_int(uint32_t irq)
+{
+	writel(1 << irq, MSM_GCC_BASE + 0x8);
+}
+#else
+static inline void msm_a2m_int(uint32_t irq)
+{
+	writel(1, MSM_CSR_BASE + 0x400 + (irq * 4));
+}
+#endif /* CONFIG_ARCH_MSM7X30 */
+
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/timer.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/timer.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/timer.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/timer.c	2010-08-01 18:11:14.000000000 -0400
@@ -25,7 +25,9 @@
 #include <asm/mach/time.h>
 #include <mach/msm_iomap.h>
 
+#ifndef MSM_DGT_BASE
 #define MSM_DGT_BASE (MSM_GPT_BASE + 0x10)
+#endif
 #define MSM_DGT_SHIFT (5)
 
 #define TIMER_MATCH_VAL         0x0000
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-msm/vreg.c linux-libre-2.6.35-gnu/arch/arm/mach-msm/vreg.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-msm/vreg.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-msm/vreg.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,6 +1,7 @@
 /* arch/arm/mach-msm/vreg.c
  *
  * Copyright (C) 2008 Google, Inc.
+ * Copyright (c) 2009, Code Aurora Forum. All rights reserved.
  * Author: Brian Swetland <swetland@google.com>
  *
  * This software is licensed under the terms of the GNU General Public
@@ -18,6 +19,7 @@
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/debugfs.h>
+#include <linux/string.h>
 #include <mach/vreg.h>
 
 #include "proc_comm.h"
@@ -25,42 +27,62 @@
 struct vreg {
 	const char *name;
 	unsigned id;
+	int status;
+	unsigned refcnt;
 };
 
-#define VREG(_name, _id) { .name = _name, .id = _id, }
+#define VREG(_name, _id, _status, _refcnt) \
+	{ .name = _name, .id = _id, .status = _status, .refcnt = _refcnt }
 
 static struct vreg vregs[] = {
-	VREG("msma",	0),
-	VREG("msmp",	1),
-	VREG("msme1",	2),
-	VREG("msmc1",	3),
-	VREG("msmc2",	4),
-	VREG("gp3",	5),
-	VREG("msme2",	6),
-	VREG("gp4",	7),
-	VREG("gp1",	8),
-	VREG("tcxo",	9),
-	VREG("pa",	10),
-	VREG("rftx",	11),
-	VREG("rfrx1",	12),
-	VREG("rfrx2",	13),
-	VREG("synt",	14),
-	VREG("wlan",	15),
-	VREG("usb",	16),
-	VREG("boost",	17),
-	VREG("mmc",	18),
-	VREG("ruim",	19),
-	VREG("msmc0",	20),
-	VREG("gp2",	21),
-	VREG("gp5",	22),
-	VREG("gp6",	23),
-	VREG("rf",	24),
-	VREG("rf_vco",	26),
-	VREG("mpll",	27),
-	VREG("s2",	28),
-	VREG("s3",	29),
-	VREG("rfubm",	30),
-	VREG("ncp",	31),
+	VREG("msma",	0, 0, 0),
+	VREG("msmp",	1, 0, 0),
+	VREG("msme1",	2, 0, 0),
+	VREG("msmc1",	3, 0, 0),
+	VREG("msmc2",	4, 0, 0),
+	VREG("gp3",	5, 0, 0),
+	VREG("msme2",	6, 0, 0),
+	VREG("gp4",	7, 0, 0),
+	VREG("gp1",	8, 0, 0),
+	VREG("tcxo",	9, 0, 0),
+	VREG("pa",	10, 0, 0),
+	VREG("rftx",	11, 0, 0),
+	VREG("rfrx1",	12, 0, 0),
+	VREG("rfrx2",	13, 0, 0),
+	VREG("synt",	14, 0, 0),
+	VREG("wlan",	15, 0, 0),
+	VREG("usb",	16, 0, 0),
+	VREG("boost",	17, 0, 0),
+	VREG("mmc",	18, 0, 0),
+	VREG("ruim",	19, 0, 0),
+	VREG("msmc0",	20, 0, 0),
+	VREG("gp2",	21, 0, 0),
+	VREG("gp5",	22, 0, 0),
+	VREG("gp6",	23, 0, 0),
+	VREG("rf",	24, 0, 0),
+	VREG("rf_vco",	26, 0, 0),
+	VREG("mpll",	27, 0, 0),
+	VREG("s2",	28, 0, 0),
+	VREG("s3",	29, 0, 0),
+	VREG("rfubm",	30, 0, 0),
+	VREG("ncp",	31, 0, 0),
+	VREG("gp7",	32, 0, 0),
+	VREG("gp8",	33, 0, 0),
+	VREG("gp9",	34, 0, 0),
+	VREG("gp10",	35, 0, 0),
+	VREG("gp11",	36, 0, 0),
+	VREG("gp12",	37, 0, 0),
+	VREG("gp13",	38, 0, 0),
+	VREG("gp14",	39, 0, 0),
+	VREG("gp15",	40, 0, 0),
+	VREG("gp16",	41, 0, 0),
+	VREG("gp17",	42, 0, 0),
+	VREG("s4",	43, 0, 0),
+	VREG("usb2",	44, 0, 0),
+	VREG("wlan2",	45, 0, 0),
+	VREG("xo_out",	46, 0, 0),
+	VREG("lvsw0",	47, 0, 0),
+	VREG("lvsw1",	48, 0, 0),
 };
 
 struct vreg *vreg_get(struct device *dev, const char *id)
@@ -70,7 +92,7 @@
 		if (!strcmp(vregs[n].name, id))
 			return vregs + n;
 	}
-	return 0;
+	return ERR_PTR(-ENOENT);
 }
 
 void vreg_put(struct vreg *vreg)
@@ -81,20 +103,39 @@
 {
 	unsigned id = vreg->id;
 	unsigned enable = 1;
-	return msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
+
+	if (vreg->refcnt == 0)
+		vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
+
+	if ((vreg->refcnt < UINT_MAX) && (!vreg->status))
+		vreg->refcnt++;
+
+	return vreg->status;
 }
 
-void vreg_disable(struct vreg *vreg)
+int vreg_disable(struct vreg *vreg)
 {
 	unsigned id = vreg->id;
 	unsigned enable = 0;
-	msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
+
+	if (!vreg->refcnt)
+		return 0;
+
+	if (vreg->refcnt == 1)
+		vreg->status = msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable);
+
+	if (!vreg->status)
+		vreg->refcnt--;
+
+	return vreg->status;
 }
 
 int vreg_set_level(struct vreg *vreg, unsigned mv)
 {
 	unsigned id = vreg->id;
-	return msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv);
+
+	vreg->status = msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv);
+	return vreg->status;
 }
 
 #if defined(CONFIG_DEBUG_FS)
@@ -118,24 +159,59 @@
 
 static int vreg_debug_get(void *data, u64 *val)
 {
-	return -ENOSYS;
+	struct vreg *vreg = data;
+
+	if (!vreg->status)
+		*val = 0;
+	else
+		*val = 1;
+
+	return 0;
+}
+
+static int vreg_debug_count_set(void *data, u64 val)
+{
+	struct vreg *vreg = data;
+	if (val > UINT_MAX)
+		val = UINT_MAX;
+	vreg->refcnt = val;
+	return 0;
+}
+
+static int vreg_debug_count_get(void *data, u64 *val)
+{
+	struct vreg *vreg = data;
+
+	*val = vreg->refcnt;
+
+	return 0;
 }
 
 DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(vreg_count_fops, vreg_debug_count_get,
+			vreg_debug_count_set, "%llu\n");
 
 static int __init vreg_debug_init(void)
 {
 	struct dentry *dent;
 	int n;
+	char name[32];
+	const char *refcnt_name = "_refcnt";
 
 	dent = debugfs_create_dir("vreg", 0);
 	if (IS_ERR(dent))
 		return 0;
 
-	for (n = 0; n < ARRAY_SIZE(vregs); n++)
+	for (n = 0; n < ARRAY_SIZE(vregs); n++) {
 		(void) debugfs_create_file(vregs[n].name, 0644,
 					   dent, vregs + n, &vreg_fops);
 
+		strlcpy(name, vregs[n].name, sizeof(name));
+		strlcat(name, refcnt_name, sizeof(name));
+		(void) debugfs_create_file(name, 0644,
+					   dent, vregs + n, &vreg_count_fops);
+	}
+
 	return 0;
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx2/devices.c linux-libre-2.6.35-gnu/arch/arm/mach-mx2/devices.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx2/devices.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx2/devices.c	2010-08-01 18:11:14.000000000 -0400
@@ -109,12 +109,7 @@
 DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
 #endif
 
-/*
- * Watchdog:
- * - i.MX1
- * - i.MX21
- * - i.MX27
- */
+/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */
 static struct resource mxc_wdt_resources[] = {
 	{
 		.start = MX2x_WDOG_BASE_ADDR,
@@ -124,7 +119,7 @@
 };
 
 struct platform_device mxc_wdt = {
-	.name = "mxc_wdt",
+	.name = "imx2-wdt",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
 	.resource = mxc_wdt_resources,
@@ -483,8 +478,8 @@
 #ifdef CONFIG_MACH_MX21
 static struct resource mx21_usbhc_resources[] = {
 	{
-		.start	= MX21_BASE_ADDR,
-		.end	= MX21_BASE_ADDR + 0x1FFF,
+		.start	= MX21_USBOTG_BASE_ADDR,
+		.end	= MX21_USBOTG_BASE_ADDR + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx2/mach-pca100.c linux-libre-2.6.35-gnu/arch/arm/mach-mx2/mach-pca100.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx2/mach-pca100.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx2/mach-pca100.c	2010-08-01 18:11:14.000000000 -0400
@@ -145,6 +145,7 @@
 static struct platform_device *platform_devices[] __initdata = {
 	&mxc_w1_master_device,
 	&mxc_fec_device,
+	&mxc_wdt,
 };
 
 static struct imxi2c_platform_data pca100_i2c_1_data = {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx2/mach-pcm038.c linux-libre-2.6.35-gnu/arch/arm/mach-mx2/mach-pcm038.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx2/mach-pcm038.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx2/mach-pcm038.c	2010-08-01 18:11:14.000000000 -0400
@@ -182,6 +182,7 @@
 	&mxc_w1_master_device,
 	&mxc_fec_device,
 	&pcm038_sram_mtd_device,
+	&mxc_wdt,
 };
 
 /* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx2/pcm970-baseboard.c linux-libre-2.6.35-gnu/arch/arm/mach-mx2/pcm970-baseboard.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx2/pcm970-baseboard.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx2/pcm970-baseboard.c	2010-08-01 18:11:14.000000000 -0400
@@ -201,9 +201,9 @@
 };
 
 struct sja1000_platform_data pcm970_sja1000_platform_data = {
-	.clock		= 16000000 / 2,
-	.ocr		= 0x40 | 0x18,
-	.cdr		= 0x40,
+	.osc_freq	= 16000000,
+	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
+	.cdr		= CDR_CBP,
 };
 
 static struct platform_device pcm970_sja1000 = {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx25/devices.c linux-libre-2.6.35-gnu/arch/arm/mach-mx25/devices.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx25/devices.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx25/devices.c	2010-08-01 18:11:14.000000000 -0400
@@ -500,3 +500,18 @@
 		.coherent_dma_mask = 0xFFFFFFFF,
 	},
 };
+
+static struct resource mxc_wdt_resources[] = {
+	{
+		.start = MX25_WDOG_BASE_ADDR,
+		.end = MX25_WDOG_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_wdt = {
+	.name = "imx2-wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
+	.resource = mxc_wdt_resources,
+};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx25/devices.h linux-libre-2.6.35-gnu/arch/arm/mach-mx25/devices.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx25/devices.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx25/devices.h	2010-08-01 18:11:14.000000000 -0400
@@ -21,3 +21,4 @@
 extern struct platform_device mxc_nand_device;
 extern struct platform_device mx25_rtc_device;
 extern struct platform_device mx25_fb_device;
+extern struct platform_device mxc_wdt;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx3/devices.c linux-libre-2.6.35-gnu/arch/arm/mach-mx3/devices.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx3/devices.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx3/devices.c	2010-08-01 18:11:14.000000000 -0400
@@ -582,12 +582,50 @@
 };
 
 struct platform_device imx_wdt_device0 = {
-	.name           = "imx-wdt",
+	.name           = "imx2-wdt",
 	.id             = 0,
 	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
 	.resource       = imx_wdt_resources,
 };
 
+static struct resource imx_rtc_resources[] = {
+	{
+		.start  = MX31_RTC_BASE_ADDR,
+		.end    = MX31_RTC_BASE_ADDR + 0x3fff,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = MX31_INT_RTC,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_rtc_device0 = {
+	.name           = "mxc_rtc",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
+	.resource       = imx_rtc_resources,
+};
+
+static struct resource imx_kpp_resources[] = {
+	{
+		.start	= MX3x_KPP_BASE_ADDR,
+		.end	= MX3x_KPP_BASE_ADDR + 0xf,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MX3x_INT_KPP,
+		.end	= MX3x_INT_KPP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_kpp_device = {
+	.name = "imx-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(imx_kpp_resources),
+	.resource = imx_kpp_resources,
+};
+
 static int __init mx3_devices_init(void)
 {
 	if (cpu_is_mx31()) {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx3/devices.h linux-libre-2.6.35-gnu/arch/arm/mach-mx3/devices.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx3/devices.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx3/devices.h	2010-08-01 18:11:14.000000000 -0400
@@ -27,3 +27,5 @@
 extern struct platform_device imx_ssi_device1;
 extern struct platform_device imx_ssi_device1;
 extern struct platform_device imx_wdt_device0;
+extern struct platform_device imx_rtc_device0;
+extern struct platform_device imx_kpp_device;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx3/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-mx3/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx3/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx3/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -82,6 +82,7 @@
 config MACH_MX31LILLY
 	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31 based LILLY1131 modules. This includes
 	  specific configurations for the board and its peripherals.
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mach-mx31_3ds.c linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mach-mx31_3ds.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mach-mx31_3ds.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mach-mx31_3ds.c	2010-08-01 18:11:14.000000000 -0400
@@ -16,6 +16,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/clk.h>
@@ -26,6 +27,8 @@
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
 #include <linux/regulator/machine.h>
+#include <linux/fsl_devices.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -65,6 +68,50 @@
 	MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
 	/* MC13783 IRQ */
 	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
+	/* USB OTG reset */
+	IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+	MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+	MX31_PIN_USBOTG_STP__USBOTG_STP,
+	/*Keyboard*/
+	MX31_PIN_KEY_ROW0_KEY_ROW0,
+	MX31_PIN_KEY_ROW1_KEY_ROW1,
+	MX31_PIN_KEY_ROW2_KEY_ROW2,
+	MX31_PIN_KEY_COL0_KEY_COL0,
+	MX31_PIN_KEY_COL1_KEY_COL1,
+	MX31_PIN_KEY_COL2_KEY_COL2,
+	MX31_PIN_KEY_COL3_KEY_COL3,
+};
+
+/*
+ * Matrix keyboard
+ */
+
+static const uint32_t mx31_3ds_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_LEFT),
+	KEY(1, 2, KEY_ENTER),
+	KEY(2, 0, KEY_F6),
+	KEY(2, 1, KEY_F8),
+	KEY(2, 2, KEY_F9),
+	KEY(2, 3, KEY_F10),
+};
+
+static struct matrix_keymap_data mx31_3ds_keymap_data = {
+	.keymap		= mx31_3ds_keymap,
+	.keymap_size	= ARRAY_SIZE(mx31_3ds_keymap),
 };
 
 /* Regulators */
@@ -126,6 +173,41 @@
 #endif
 };
 
+/*
+ * USB OTG
+ */
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+		     PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
+
+static void mx31_3ds_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	gpio_request(USBOTG_RST_B, "otgusb-reset");
+	gpio_direction_output(USBOTG_RST_B, 0);
+	mdelay(1);
+	gpio_set_value(USBOTG_RST_B, 1);
+}
+
+static struct fsl_usb2_platform_data usbotg_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -315,6 +397,11 @@
 	spi_register_board_info(mx31_3ds_spi_devs,
 						ARRAY_SIZE(mx31_3ds_spi_devs));
 
+	mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data);
+
+	mx31_3ds_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
+
 	if (!mx31_3ds_init_expio())
 		platform_device_register(&smsc911x_device);
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mach-mx31lilly.c linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mach-mx31lilly.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mach-mx31lilly.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mach-mx31lilly.c	2010-08-01 18:11:14.000000000 -0400
@@ -27,12 +27,15 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/mc13783.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -44,6 +47,8 @@
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
 #include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
@@ -108,11 +113,154 @@
 	.num_resources = 1,
 };
 
-static struct platform_device *devices[] __initdata = {
-	&smsc91x_device,
-	&physmap_flash_device,
+/* USB */
+
+#if defined(CONFIG_USB_ULPI)
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbotg_init(struct platform_device *pdev)
+{
+	unsigned int pins[] = {
+		MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+		MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+		MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+		MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+		MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+		MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+		MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+		MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+		MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+		MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+		MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+		MX31_PIN_USBOTG_STP__USBOTG_STP,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB OTG");
+
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_USB_4WIRE, true);
+	mxc_iomux_set_gpr(MUX_PGP_USB_COMMON, true);
+
+	/* chip select */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE2, IOMUX_CONFIG_GPIO),
+				"USBOTG_CS");
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0);
+
+	return 0;
+}
+
+static int usbh1_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+		MX31_PIN_CSPI1_MISO__USBH1_RXDP,
+		MX31_PIN_CSPI1_SS0__USBH1_TXDM,
+		MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+		MX31_PIN_CSPI1_SS2__USBH1_RCV,
+		MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+		MX31_PIN_CSPI1_SPI_RDY__USBH1_FS,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1");
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	return 0;
+}
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+		MX31_PIN_USBH2_CLK__USBH2_CLK,
+		MX31_PIN_USBH2_DIR__USBH2_DIR,
+		MX31_PIN_USBH2_NXT__USBH2_NXT,
+		MX31_PIN_USBH2_STP__USBH2_STP,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	/* chip select */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
+				"USBH2_CS");
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbotg_pdata = {
+	.init	= usbotg_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.init	= usbh1_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= usbh2_init,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
+static void lilly1131_usb_init(void)
+{
+	usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+}
+
+#else
+static inline void lilly1131_usb_init(void) {}
+#endif /* CONFIG_USB_ULPI */
+
 /* SPI */
 
 static int spi_internal_chipselect[] = {
@@ -143,6 +291,11 @@
 	.platform_data	= &mc13783_pdata,
 };
 
+static struct platform_device *devices[] __initdata = {
+	&smsc91x_device,
+	&physmap_flash_device,
+};
+
 static int mx31lilly_baseboard;
 core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
 
@@ -183,6 +336,9 @@
 	spi_register_board_info(&mc13783_dev, 1);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	/* USB */
+	lilly1131_usb_init();
 }
 
 static void __init mx31lilly_timer_init(void)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mach-mx31moboard.c linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mach-mx31moboard.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mach-mx31moboard.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mach-mx31moboard.c	2010-08-01 18:11:14.000000000 -0400
@@ -18,7 +18,6 @@
 
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
-#include <linux/fsl_devices.h>
 #include <linux/gfp.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
@@ -221,11 +220,54 @@
 	},
 };
 
+static struct mc13783_led_platform_data moboard_led[] = {
+	{
+		.id = MC13783_LED_R1,
+		.name = "coreboard-led-4:red",
+		.max_current = 2,
+	},
+	{
+		.id = MC13783_LED_G1,
+		.name = "coreboard-led-4:green",
+		.max_current = 2,
+	},
+	{
+		.id = MC13783_LED_B1,
+		.name = "coreboard-led-4:blue",
+		.max_current = 2,
+	},
+	{
+		.id = MC13783_LED_R2,
+		.name = "coreboard-led-5:red",
+		.max_current = 3,
+	},
+	{
+		.id = MC13783_LED_G2,
+		.name = "coreboard-led-5:green",
+		.max_current = 3,
+	},
+	{
+		.id = MC13783_LED_B2,
+		.name = "coreboard-led-5:blue",
+		.max_current = 3,
+	},
+};
+
+static struct mc13783_leds_platform_data moboard_leds = {
+	.num_leds = ARRAY_SIZE(moboard_led),
+	.led = moboard_led,
+	.flags = MC13783_LED_SLEWLIMTC,
+	.abmode = MC13783_LED_AB_DISABLED,
+	.tc1_period = MC13783_LED_PERIOD_10MS,
+	.tc2_period = MC13783_LED_PERIOD_10MS,
+};
+
 static struct mc13783_platform_data moboard_pmic = {
 	.regulators = moboard_regulators,
 	.num_regulators = ARRAY_SIZE(moboard_regulators),
+	.leds = &moboard_leds,
 	.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
-		MC13783_USE_ADC,
+		MC13783_USE_ADC | MC13783_USE_LED,
 };
 
 static struct spi_board_info moboard_spi_board_info[] __initdata = {
@@ -306,84 +348,56 @@
  * this pin is dedicated for all mx31moboard systems, so we do it here
  */
 #define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
-
-static void usb_xcvr_reset(void)
-{
-	gpio_request(USB_RESET_B, "usb-reset");
-	gpio_direction_output(USB_RESET_B, 0);
-	mdelay(1);
-	gpio_set_value(USB_RESET_B, 1);
-}
-
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+		      PAD_CTL_ODE_CMOS)
 
 #define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void moboard_usbotg_init(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-}
-
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#if defined(CONFIG_USB_ULPI)
-
 #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
-static int moboard_usbh2_hw_init(struct platform_device *pdev)
+static void usb_xcvr_reset(void)
 {
-	int ret;
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
 
 	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
 
-	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
-
-	ret = gpio_request(USBH2_EN_B, "usbh2-en");
-	if (ret)
-		return ret;
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+	gpio_request(USBH2_EN_B, "usbh2-en");
 	gpio_direction_output(USBH2_EN_B, 0);
 
-	return 0;
+	gpio_request(USB_RESET_B, "usb-reset");
+	gpio_direction_output(USB_RESET_B, 0);
+	mdelay(1);
+	gpio_set_value(USB_RESET_B, 1);
+	mdelay(1);
 }
 
-static int moboard_usbh2_hw_exit(struct platform_device *pdev)
-{
-	gpio_free(USBH2_EN_B);
-	return 0;
-}
+#if defined(CONFIG_USB_ULPI)
 
 static struct mxc_usbh_platform_data usbh2_pdata = {
-	.init	= moboard_usbh2_hw_init,
-	.exit	= moboard_usbh2_hw_exit,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
@@ -508,8 +522,6 @@
 
 	usb_xcvr_reset();
 
-	moboard_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 	moboard_usbh2_init();
 
 	switch (mx31moboard_baseboard) {
@@ -522,7 +534,8 @@
 		mx31moboard_marxbot_init();
 		break;
 	case MX31SMARTBOT:
-		mx31moboard_smartbot_init();
+	case MX31EYEBOT:
+		mx31moboard_smartbot_init(mx31moboard_baseboard);
 		break;
 	default:
 		printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mach-pcm037.c linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mach-pcm037.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mach-pcm037.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mach-pcm037.c	2010-08-01 18:11:14.000000000 -0400
@@ -449,6 +449,7 @@
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
+	&imx_wdt_device0,
 	&pcm037_mt9t031,
 	&pcm037_mt9v022,
 };
@@ -530,9 +531,9 @@
 };
 
 struct sja1000_platform_data pcm970_sja1000_platform_data = {
-	.clock		= 16000000 / 2,
-	.ocr		= 0x40 | 0x18,
-	.cdr		= 0x40,
+	.osc_freq	= 16000000,
+	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
+	.cdr		= CDR_CBP,
 };
 
 static struct platform_device pcm970_sja1000 = {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mach-pcm043.c linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mach-pcm043.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mach-pcm043.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mach-pcm043.c	2010-08-01 18:11:14.000000000 -0400
@@ -150,6 +150,7 @@
 static struct platform_device *devices[] __initdata = {
 	&pcm043_flash,
 	&mxc_fec_device,
+	&imx_wdt_device0,
 };
 
 static struct pad_desc pcm043_pads[] = {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mx31lite-db.c linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mx31lite-db.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mx31lite-db.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mx31lite-db.c	2010-08-01 18:11:14.000000000 -0400
@@ -206,5 +206,6 @@
 	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
 	platform_device_register(&litekit_led_device);
 	mxc_register_device(&imx_wdt_device0, NULL);
+	mxc_register_device(&imx_rtc_device0, NULL);
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mx31moboard-devboard.c linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mx31moboard-devboard.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mx31moboard-devboard.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mx31moboard-devboard.c	2010-08-01 18:11:14.000000000 -0400
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/fsl_devices.h>
 
 #include <linux/usb/otg.h>
 
@@ -213,6 +214,12 @@
 	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -229,5 +236,7 @@
 
 	devboard_init_sel_gpios();
 
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
 	devboard_usbh1_init();
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mx31moboard-marxbot.c linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mx31moboard-marxbot.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mx31moboard-marxbot.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mx31moboard-marxbot.c	2010-08-01 18:11:14.000000000 -0400
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
+#include <linux/fsl_devices.h>
 
 #include <linux/usb/otg.h>
 
@@ -329,6 +330,11 @@
 	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -356,5 +362,7 @@
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
 	gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
 
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
 	marxbot_usbh1_init();
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mx31moboard-smartbot.c linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mx31moboard-smartbot.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx3/mx31moboard-smartbot.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx3/mx31moboard-smartbot.c	2010-08-01 18:11:14.000000000 -0400
@@ -23,11 +23,18 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
+#include <linux/fsl_devices.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/board-mx31moboard.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include <media/soc_camera.h>
 
@@ -116,10 +123,33 @@
 	return 0;
 }
 
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
+#if defined(CONFIG_USB_ULPI)
+
+static struct mxc_usbh_platform_data otg_host_pdata = {
+	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static int __init smartbot_otg_host_init(void)
+{
+	otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	return mxc_register_device(&mxc_otg_host, &otg_host_pdata);
+}
+#else
+static inline int smartbot_otg_host_init(void) { return 0; }
+#endif
+
 #define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
 #define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
 #define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
 
 static void smartbot_resets_init(void)
 {
@@ -138,15 +168,15 @@
 		gpio_export(TRSLAT_RST_B, false);
 	}
 
-	if (!gpio_request(SEL3, "sel3")) {
-		gpio_direction_input(SEL3);
-		gpio_export(SEL3, true);
+	if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) {
+		gpio_direction_output(TRSLAT_SRC_CHOICE, 0);
+		gpio_export(TRSLAT_SRC_CHOICE, false);
 	}
 }
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
-void __init mx31moboard_smartbot_init(void)
+void __init mx31moboard_smartbot_init(int board)
 {
 	printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
 
@@ -155,6 +185,19 @@
 
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
+
+	switch (board) {
+	case MX31SMARTBOT:
+		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+		break;
+	case MX31EYEBOT:
+		smartbot_otg_host_init();
+		break;
+	default:
+		printk(KERN_WARNING "Unknown board %d, USB OTG not initialized",
+			board);
+	}
+
 	smartbot_resets_init();
 
 	smartbot_cam_init();
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx5/board-mx51_babbage.c linux-libre-2.6.35-gnu/arch/arm/mach-mx5/board-mx51_babbage.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx5/board-mx51_babbage.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx5/board-mx51_babbage.c	2010-08-01 18:11:14.000000000 -0400
@@ -12,11 +12,16 @@
 
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx51.h>
+#include <mach/mxc_ehci.h>
 
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -26,6 +31,18 @@
 
 #include "devices.h"
 
+#define BABBAGE_USB_HUB_RESET	(0*32 + 7)	/* GPIO_1_7 */
+#define BABBAGE_USBH1_STP	(0*32 + 27)	/* GPIO_1_27 */
+#define BABBAGE_PHY_RESET (1*32 +5)	/* GPIO_2_5 */
+
+/* USB_CTRL_1 */
+#define MX51_USB_CTRL_1_OFFSET			0x10
+#define MX51_USB_CTRL_UH1_EXT_CLK_EN		(1 << 25)
+
+#define	MX51_USB_PLLDIV_12_MHZ		0x00
+#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
+#define	MX51_USB_PLL_DIV_24_MHZ	0x02
+
 static struct platform_device *devices[] __initdata = {
 	&mxc_fec_device,
 };
@@ -46,6 +63,22 @@
 	MX51_PAD_EIM_D26__UART3_TXD,
 	MX51_PAD_EIM_D27__UART3_RTS,
 	MX51_PAD_EIM_D24__UART3_CTS,
+
+	/* USB HOST1 */
+	MX51_PAD_USBH1_CLK__USBH1_CLK,
+	MX51_PAD_USBH1_DIR__USBH1_DIR,
+	MX51_PAD_USBH1_NXT__USBH1_NXT,
+	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
+	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
+	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
+	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
+	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
+	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
+	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
+	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
+
+	/* USB HUB reset line*/
+	MX51_PAD_GPIO_1_7__GPIO1_7,
 };
 
 /* Serial ports */
@@ -66,15 +99,149 @@
 }
 #endif /* SERIAL_IMX */
 
+static int gpio_usbh1_active(void)
+{
+	struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
+	struct pad_desc phyreset_gpio = MX51_PAD_EIM_D21__GPIO_2_5;
+	int ret;
+
+	/* Set USBH1_STP to GPIO and toggle it */
+	mxc_iomux_v3_setup_pad(&usbh1stp_gpio);
+	ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp");
+
+	if (ret) {
+		pr_debug("failed to get MX51_PAD_USBH1_STP__GPIO_1_27: %d\n", ret);
+		return ret;
+	}
+	gpio_direction_output(BABBAGE_USBH1_STP, 0);
+	gpio_set_value(BABBAGE_USBH1_STP, 1);
+	msleep(100);
+	gpio_free(BABBAGE_USBH1_STP);
+
+	/* De-assert USB PHY RESETB */
+	mxc_iomux_v3_setup_pad(&phyreset_gpio);
+	ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset");
+
+	if (ret) {
+		pr_debug("failed to get MX51_PAD_EIM_D21__GPIO_2_5: %d\n", ret);
+		return ret;
+	}
+	gpio_direction_output(BABBAGE_PHY_RESET, 1);
+	return 0;
+}
+
+static inline void babbage_usbhub_reset(void)
+{
+	int ret;
+
+	/* Bring USB hub out of reset */
+	ret = gpio_request(BABBAGE_USB_HUB_RESET, "GPIO1_7");
+	if (ret) {
+		printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
+		return;
+	}
+	gpio_direction_output(BABBAGE_USB_HUB_RESET, 0);
+
+	/* USB HUB RESET - De-assert USB HUB RESET_N */
+	msleep(1);
+	gpio_set_value(BABBAGE_USB_HUB_RESET, 0);
+	msleep(1);
+	gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
+}
+
+/* This function is board specific as the bit mask for the plldiv will also
+be different for other Freescale SoCs, thus a common bitmask is not
+possible and cannot get place in /plat-mxc/ehci.c.*/
+static int initialize_otg_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	u32 usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* Set the PHY clock to 19.2MHz */
+	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
+	v |= MX51_USB_PLL_DIV_19_2_MHZ;
+	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static int initialize_usbh1_port(struct platform_device *pdev)
+{
+	u32 v;
+	void __iomem *usb_base;
+	u32 usbother_base;
+
+	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
+	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
+	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
+	iounmap(usb_base);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data dr_utmi_config = {
+	.init		= initialize_otg_port,
+	.portsc	= MXC_EHCI_UTMI_16BIT,
+	.flags	= MXC_EHCI_INTERNAL_PHY,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
+};
+
+static struct mxc_usbh_platform_data usbh1_config = {
+	.init		= initialize_usbh1_port,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
+};
+
+static int otg_mode_host;
+
+static int __init babbage_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", babbage_otg_mode);
+
 /*
  * Board specific initialization.
  */
 static void __init mxc_board_init(void)
 {
+	struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
+
 	mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
 					ARRAY_SIZE(mx51babbage_pads));
 	mxc_init_imx_uart();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	if (otg_mode_host)
+		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	else {
+		initialize_otg_port(NULL);
+		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+	}
+
+	gpio_usbh1_active();
+	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+	/* setback USBH1_STP to be function */
+	mxc_iomux_v3_setup_pad(&usbh1stp);
+	babbage_usbhub_reset();
 }
 
 static void __init mx51_babbage_timer_init(void)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx5/clock-mx51.c linux-libre-2.6.35-gnu/arch/arm/mach-mx5/clock-mx51.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx5/clock-mx51.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx5/clock-mx51.c	2010-08-01 18:11:14.000000000 -0400
@@ -37,6 +37,7 @@
 static struct clk periph_apm_clk;
 static struct clk ahb_clk;
 static struct clk ipg_clk;
+static struct clk usboh3_clk;
 
 #define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
 
@@ -570,6 +571,35 @@
 	return 0;
 }
 
+static unsigned long clk_usboh3_get_rate(struct clk *clk)
+{
+	u32 reg, prediv, podf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	reg = __raw_readl(MXC_CCM_CSCDR1);
+	prediv = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK) >>
+		  MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET) + 1;
+	podf = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK) >>
+		MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET) + 1;
+
+	return parent_rate / (prediv * podf);
+}
+
+static int _clk_usboh3_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg, mux;
+
+	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
+		       &lp_apm_clk);
+	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK;
+	reg |= mux << MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET;
+	__raw_writel(reg, MXC_CCM_CSCMR1);
+
+	return 0;
+}
+
 static unsigned long get_high_reference_clock_rate(struct clk *clk)
 {
 	return external_high_reference;
@@ -691,6 +721,12 @@
 	.set_parent = _clk_uart_set_parent,
 };
 
+static struct clk usboh3_clk = {
+	.parent = &pll2_sw_clk,
+	.get_rate = clk_usboh3_get_rate,
+	.set_parent = _clk_usboh3_set_parent,
+};
+
 static struct clk ahb_max_clk = {
 	.parent = &ahb_clk,
 	.enable_reg = MXC_CCM_CCGR0,
@@ -779,6 +815,12 @@
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
 };
 
 static void clk_tree_init(void)
@@ -819,6 +861,9 @@
 	clk_enable(&cpu_clk);
 	clk_enable(&main_bus_clk);
 
+	/* set the usboh3_clk parent to pll2_sw_clk */
+	clk_set_parent(&usboh3_clk, &pll2_sw_clk);
+
 	/* System timer */
 	mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
 		MX51_MXC_INT_GPT);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx5/devices.c linux-libre-2.6.35-gnu/arch/arm/mach-mx5/devices.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx5/devices.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx5/devices.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,5 +1,6 @@
 /*
  * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
@@ -10,8 +11,11 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
+#include <mach/irqs.h>
 
 static struct resource uart0[] = {
 	{
@@ -89,8 +93,109 @@
 	.resource = mxc_fec_resources,
 };
 
-/* Dummy definition to allow compiling in AVIC and TZIC simultaneously */
+static u64 usb_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource usbotg_resources[] = {
+	{
+		.start = MX51_OTG_BASE_ADDR,
+		.end = MX51_OTG_BASE_ADDR + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MX51_MXC_INT_USB_OTG,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+/* OTG gadget device */
+struct platform_device mxc_usbdr_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(usbotg_resources),
+	.resource	= usbotg_resources,
+	.dev		= {
+		.dma_mask		= &usb_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+struct platform_device mxc_usbdr_host_device = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(usbotg_resources),
+	.resource = usbotg_resources,
+	.dev = {
+		.dma_mask = &usb_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource usbh1_resources[] = {
+	{
+		.start = MX51_OTG_BASE_ADDR + 0x200,
+		.end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MX51_MXC_INT_USB_H1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1_device = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(usbh1_resources),
+	.resource = usbh1_resources,
+	.dev = {
+		.dma_mask = &usb_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource mxc_wdt_resources[] = {
+	{
+		.start = MX51_WDOG_BASE_ADDR,
+		.end = MX51_WDOG_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_wdt = {
+	.name = "imx2-wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
+	.resource = mxc_wdt_resources,
+};
+
+static struct mxc_gpio_port mxc_gpio_ports[] = {
+	{
+		.chip.label = "gpio-0",
+		.base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
+		.irq = MX51_MXC_INT_GPIO1_LOW,
+		.virtual_irq_start = MXC_GPIO_IRQ_START
+	},
+	{
+		.chip.label = "gpio-1",
+		.base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
+		.irq = MX51_MXC_INT_GPIO2_LOW,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
+	},
+	{
+		.chip.label = "gpio-2",
+		.base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
+		.irq = MX51_MXC_INT_GPIO3_LOW,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
+	},
+	{
+		.chip.label = "gpio-3",
+		.base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
+		.irq = MX51_MXC_INT_GPIO4_LOW,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
+	},
+};
+
 int __init mxc_register_gpios(void)
 {
-	return 0;
+	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-mx5/devices.h linux-libre-2.6.35-gnu/arch/arm/mach-mx5/devices.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-mx5/devices.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-mx5/devices.h	2010-08-01 18:11:14.000000000 -0400
@@ -2,3 +2,7 @@
 extern struct platform_device mxc_uart_device1;
 extern struct platform_device mxc_uart_device2;
 extern struct platform_device mxc_fec_device;
+extern struct platform_device mxc_usbdr_host_device;
+extern struct platform_device mxc_usbh1_device;
+extern struct platform_device mxc_usbdr_udc_device;
+extern struct platform_device mxc_wdt;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/board-nhk8815.c linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/board-nhk8815.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/board-nhk8815.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/board-nhk8815.c	2010-08-01 18:11:14.000000000 -0400
@@ -32,7 +32,6 @@
 #include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
-#include "clock.h"
 
 /* Initial value for SRC control register: all timers use MXTAL/8 source */
 #define SRC_CR_INIT_MASK	0x00007fff
@@ -202,11 +201,6 @@
 	&uart1_device,
 };
 
-/* We have a fixed clock alone, by now */
-static struct clk nhk8815_clk_48 = {
-	.rate = 48*1000*1000,
-};
-
 static struct resource nhk8815_eth_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -276,10 +270,8 @@
 	platform_add_devices(nhk8815_platform_devices,
 			     ARRAY_SIZE(nhk8815_platform_devices));
 
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name);
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
 		amba_device_register(amba_devs[i], &iomem_resource);
-	}
 }
 
 MACHINE_START(NOMADIK, "NHK8815")
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -32,14 +32,40 @@
 }
 EXPORT_SYMBOL(clk_disable);
 
-/* Create a clock structure with the given name */
-int nmdk_clk_create(struct clk *clk, const char *dev_id)
-{
-	struct clk_lookup *clkdev;
+static struct clk clk_24 = {
+	.rate = 2400000,
+};
 
-	clkdev = clkdev_alloc(clk, NULL, dev_id);
-	if (!clkdev)
-		return -ENOMEM;
-	clkdev_add(clkdev);
+static struct clk clk_48 = {
+	.rate = 48 * 1000 * 1000,
+};
+
+/*
+ * Catch-all default clock to satisfy drivers using the clk API.  We don't
+ * model the actual hardware clocks yet.
+ */
+static struct clk clk_default;
+
+#define CLK(_clk, dev)				\
+	{					\
+		.clk		= _clk,		\
+		.dev_id		= dev,		\
+	}
+
+static struct clk_lookup lookups[] = {
+	CLK(&clk_24, "mtu0"),
+	CLK(&clk_24, "mtu1"),
+	CLK(&clk_48, "uart0"),
+	CLK(&clk_48, "uart1"),
+	CLK(&clk_default, "gpio.0"),
+	CLK(&clk_default, "gpio.1"),
+	CLK(&clk_default, "gpio.2"),
+	CLK(&clk_default, "gpio.3"),
+	CLK(&clk_default, "rng"),
+};
+
+int __init clk_init(void)
+{
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/clock.h linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -11,4 +11,5 @@
 struct clk {
 	unsigned long		rate;
 };
-extern int nmdk_clk_create(struct clk *clk, const char *dev_id);
+
+int __init clk_init(void);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/cpu-8815.c linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/cpu-8815.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/cpu-8815.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/cpu-8815.c	2010-08-01 18:11:14.000000000 -0400
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
+#include <linux/platform_device.h>
 #include <linux/gpio.h>
 
 #include <mach/hardware.h>
@@ -30,60 +31,68 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 
+#include "clock.h"
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
 /* The 8815 has 4 GPIO blocks, let's register them immediately */
+
+#define GPIO_RESOURCE(block)						\
+	{								\
+		.start	= NOMADIK_GPIO##block##_BASE,			\
+		.end	= NOMADIK_GPIO##block##_BASE + SZ_4K - 1,	\
+		.flags	= IORESOURCE_MEM,				\
+	},								\
+	{								\
+		.start	= IRQ_GPIO##block,				\
+		.end	= IRQ_GPIO##block,				\
+		.flags	= IORESOURCE_IRQ,				\
+	}
+
+#define GPIO_DEVICE(block)						\
+	{								\
+		.name 		= "gpio",				\
+		.id		= block,				\
+		.num_resources 	= 2,					\
+		.resource	= &cpu8815_gpio_resources[block * 2],	\
+		.dev = {						\
+			.platform_data = &cpu8815_gpio[block],		\
+		},							\
+	}
+
 static struct nmk_gpio_platform_data cpu8815_gpio[] = {
 	{
 		.name = "GPIO-0-31",
 		.first_gpio = 0,
 		.first_irq = NOMADIK_GPIO_TO_IRQ(0),
-		.parent_irq = IRQ_GPIO0,
 	}, {
 		.name = "GPIO-32-63",
 		.first_gpio = 32,
 		.first_irq = NOMADIK_GPIO_TO_IRQ(32),
-		.parent_irq = IRQ_GPIO1,
 	}, {
 		.name = "GPIO-64-95",
 		.first_gpio = 64,
 		.first_irq = NOMADIK_GPIO_TO_IRQ(64),
-		.parent_irq = IRQ_GPIO2,
 	}, {
 		.name = "GPIO-96-127", /* 124..127 not routed to pin */
 		.first_gpio = 96,
 		.first_irq = NOMADIK_GPIO_TO_IRQ(96),
-		.parent_irq = IRQ_GPIO3,
 	}
 };
 
-#define __MEM_4K_RESOURCE(x) \
-	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+static struct resource cpu8815_gpio_resources[] = {
+	GPIO_RESOURCE(0),
+	GPIO_RESOURCE(1),
+	GPIO_RESOURCE(2),
+	GPIO_RESOURCE(3),
+};
 
-static struct amba_device cpu8815_amba_gpio[] = {
-	{
-		.dev = {
-			.init_name = "gpio0",
-			.platform_data = cpu8815_gpio + 0,
-		},
-		__MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE),
-	}, {
-		.dev = {
-			.init_name = "gpio1",
-			.platform_data = cpu8815_gpio + 1,
-		},
-		__MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE),
-	}, {
-		.dev = {
-			.init_name = "gpio2",
-			.platform_data = cpu8815_gpio + 2,
-		},
-		__MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE),
-	}, {
-		.dev = {
-			.init_name = "gpio3",
-			.platform_data = cpu8815_gpio + 3,
-		},
-		__MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE),
-	},
+static struct platform_device cpu8815_platform_gpio[] = {
+	GPIO_DEVICE(0),
+	GPIO_DEVICE(1),
+	GPIO_DEVICE(2),
+	GPIO_DEVICE(3),
 };
 
 static struct amba_device cpu8815_amba_rng = {
@@ -93,11 +102,14 @@
 	__MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
 };
 
+static struct platform_device *platform_devs[] __initdata = {
+	cpu8815_platform_gpio + 0,
+	cpu8815_platform_gpio + 1,
+	cpu8815_platform_gpio + 2,
+	cpu8815_platform_gpio + 3,
+};
+
 static struct amba_device *amba_devs[] __initdata = {
-	cpu8815_amba_gpio + 0,
-	cpu8815_amba_gpio + 1,
-	cpu8815_amba_gpio + 2,
-	cpu8815_amba_gpio + 3,
 	&cpu8815_amba_rng
 };
 
@@ -105,6 +117,7 @@
 {
 	int i;
 
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
 		amba_device_register(amba_devs[i], &iomem_resource);
 	return 0;
@@ -132,6 +145,12 @@
 	/* This modified VIC cell has two register blocks, at 0 and 0x20 */
 	vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START +  0, ~0, 0);
 	vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+
+	/*
+	 * Init clocks here so that they are available for system timer
+	 * initialization.
+	 */
+	clk_init();
 }
 
 /*
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/gpio.c linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/gpio.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,397 +0,0 @@
-/*
- * Generic GPIO driver for logic cells found in the Nomadik SoC
- *
- * Copyright (C) 2008,2009 STMicroelectronics
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-
-/*
- * The GPIO module in the Nomadik family of Systems-on-Chip is an
- * AMBA device, managing 32 pins and alternate functions.  The logic block
- * is currently only used in the Nomadik.
- *
- * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
- */
-
-#define NMK_GPIO_PER_CHIP 32
-struct nmk_gpio_chip {
-	struct gpio_chip chip;
-	void __iomem *addr;
-	unsigned int parent_irq;
-	spinlock_t *lock;
-	/* Keep track of configured edges */
-	u32 edge_rising;
-	u32 edge_falling;
-};
-
-/* Mode functions */
-int nmk_gpio_set_mode(int gpio, int gpio_mode)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-	u32 afunc, bfunc, bit;
-
-	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
-	if (!nmk_chip)
-		return -EINVAL;
-
-	bit = 1 << (gpio - nmk_chip->chip.base);
-
-	spin_lock_irqsave(&nmk_chip->lock, flags);
-	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
-	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
-	if (gpio_mode & NMK_GPIO_ALT_A)
-		afunc |= bit;
-	if (gpio_mode & NMK_GPIO_ALT_B)
-		bfunc |= bit;
-	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
-	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
-	spin_unlock_irqrestore(&nmk_chip->lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(nmk_gpio_set_mode);
-
-int nmk_gpio_get_mode(int gpio)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	u32 afunc, bfunc, bit;
-
-	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
-	if (!nmk_chip)
-		return -EINVAL;
-
-	bit = 1 << (gpio - nmk_chip->chip.base);
-
-	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
-	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
-
-	return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
-}
-EXPORT_SYMBOL(nmk_gpio_get_mode);
-
-
-/* IRQ functions */
-static inline int nmk_gpio_get_bitmask(int gpio)
-{
-	return 1 << (gpio % 32);
-}
-
-static void nmk_gpio_irq_ack(unsigned int irq)
-{
-	int gpio;
-	struct nmk_gpio_chip *nmk_chip;
-
-	gpio = NOMADIK_IRQ_TO_GPIO(irq);
-	nmk_chip = get_irq_chip_data(irq);
-	if (!nmk_chip)
-		return;
-	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
-}
-
-static void nmk_gpio_irq_mask(unsigned int irq)
-{
-	int gpio;
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-	u32 bitmask, reg;
-
-	gpio = NOMADIK_IRQ_TO_GPIO(irq);
-	nmk_chip = get_irq_chip_data(irq);
-	bitmask = nmk_gpio_get_bitmask(gpio);
-	if (!nmk_chip)
-		return;
-
-	/* we must individually clear the two edges */
-	spin_lock_irqsave(&nmk_chip->lock, flags);
-	if (nmk_chip->edge_rising & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
-		reg &= ~bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
-	}
-	if (nmk_chip->edge_falling & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
-		reg &= ~bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
-	}
-	spin_unlock_irqrestore(&nmk_chip->lock, flags);
-};
-
-static void nmk_gpio_irq_unmask(unsigned int irq)
-{
-	int gpio;
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-	u32 bitmask, reg;
-
-	gpio = NOMADIK_IRQ_TO_GPIO(irq);
-	nmk_chip = get_irq_chip_data(irq);
-	bitmask = nmk_gpio_get_bitmask(gpio);
-	if (!nmk_chip)
-		return;
-
-	/* we must individually set the two edges */
-	spin_lock_irqsave(&nmk_chip->lock, flags);
-	if (nmk_chip->edge_rising & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
-		reg |= bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
-	}
-	if (nmk_chip->edge_falling & bitmask) {
-		reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
-		reg |= bitmask;
-		writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
-	}
-	spin_unlock_irqrestore(&nmk_chip->lock, flags);
-}
-
-static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
-{
-	int gpio;
-	struct nmk_gpio_chip *nmk_chip;
-	unsigned long flags;
-	u32 bitmask;
-
-	gpio = NOMADIK_IRQ_TO_GPIO(irq);
-	nmk_chip = get_irq_chip_data(irq);
-	bitmask = nmk_gpio_get_bitmask(gpio);
-	if (!nmk_chip)
-		return -EINVAL;
-
-	if (type & IRQ_TYPE_LEVEL_HIGH)
-		return -EINVAL;
-	if (type & IRQ_TYPE_LEVEL_LOW)
-		return -EINVAL;
-
-	spin_lock_irqsave(&nmk_chip->lock, flags);
-
-	nmk_chip->edge_rising &= ~bitmask;
-	if (type & IRQ_TYPE_EDGE_RISING)
-		nmk_chip->edge_rising |= bitmask;
-	writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC);
-
-	nmk_chip->edge_falling &= ~bitmask;
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		nmk_chip->edge_falling |= bitmask;
-	writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC);
-
-	spin_unlock_irqrestore(&nmk_chip->lock, flags);
-
-	nmk_gpio_irq_unmask(irq);
-
-	return 0;
-}
-
-static struct irq_chip nmk_gpio_irq_chip = {
-	.name		= "Nomadik-GPIO",
-	.ack		= nmk_gpio_irq_ack,
-	.mask		= nmk_gpio_irq_mask,
-	.unmask		= nmk_gpio_irq_unmask,
-	.set_type	= nmk_gpio_irq_set_type,
-};
-
-static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	struct nmk_gpio_chip *nmk_chip;
-	struct irq_chip *host_chip;
-	unsigned int gpio_irq;
-	u32 pending;
-	unsigned int first_irq;
-
-	nmk_chip = get_irq_data(irq);
-	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
-	while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) {
-		gpio_irq = first_irq + __ffs(pending);
-		generic_handle_irq(gpio_irq);
-	}
-	if (0) {/* don't ack parent irq, as ack == disable */
-		host_chip = get_irq_chip(irq);
-		host_chip->ack(irq);
-	}
-}
-
-static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
-{
-	unsigned int first_irq;
-	int i;
-
-	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
-	for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) {
-		set_irq_chip(i, &nmk_gpio_irq_chip);
-		set_irq_handler(i, handle_edge_irq);
-		set_irq_flags(i, IRQF_VALID);
-		set_irq_chip_data(i, nmk_chip);
-	}
-	set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
-	set_irq_data(nmk_chip->parent_irq, nmk_chip);
-	return 0;
-}
-
-/* I/O Functions */
-static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-
-	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
-	return 0;
-}
-
-static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
-				int val)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-
-	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
-	return 0;
-}
-
-static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-	u32 bit = 1 << offset;
-
-	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
-}
-
-static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
-				int val)
-{
-	struct nmk_gpio_chip *nmk_chip =
-		container_of(chip, struct nmk_gpio_chip, chip);
-	u32 bit = 1 << offset;
-
-	if (val)
-		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
-	else
-		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
-}
-
-/* This structure is replicated for each GPIO block allocated at probe time */
-static struct gpio_chip nmk_gpio_template = {
-	.direction_input	= nmk_gpio_make_input,
-	.get			= nmk_gpio_get_input,
-	.direction_output	= nmk_gpio_make_output,
-	.set			= nmk_gpio_set_output,
-	.ngpio			= NMK_GPIO_PER_CHIP,
-	.can_sleep		= 0,
-};
-
-static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
-{
-	struct nmk_gpio_platform_data *pdata;
-	struct nmk_gpio_chip *nmk_chip;
-	struct gpio_chip *chip;
-	int ret;
-
-	pdata = dev->dev.platform_data;
-	ret = amba_request_regions(dev, pdata->name);
-	if (ret)
-		return ret;
-
-	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
-	if (!nmk_chip) {
-		ret = -ENOMEM;
-		goto out_amba;
-	}
-	/*
-	 * The virt address in nmk_chip->addr is in the nomadik register space,
-	 * so we can simply convert the resource address, without remapping
-	 */
-	nmk_chip->addr = io_p2v(dev->res.start);
-	nmk_chip->chip = nmk_gpio_template;
-	nmk_chip->parent_irq = pdata->parent_irq;
-
-	chip = &nmk_chip->chip;
-	chip->base = pdata->first_gpio;
-	chip->label = pdata->name;
-	chip->dev = &dev->dev;
-	chip->owner = THIS_MODULE;
-
-	ret = gpiochip_add(&nmk_chip->chip);
-	if (ret)
-		goto out_free;
-
-	amba_set_drvdata(dev, nmk_chip);
-
-	nmk_gpio_init_irq(nmk_chip);
-
-	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
-		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
-	return 0;
-
- out_free:
-	kfree(nmk_chip);
- out_amba:
-	amba_release_regions(dev);
-	dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
-		  pdata->first_gpio, pdata->first_gpio+31);
-	return ret;
-}
-
-static int nmk_gpio_remove(struct amba_device *dev)
-{
-	struct nmk_gpio_chip *nmk_chip;
-
-	nmk_chip = amba_get_drvdata(dev);
-	gpiochip_remove(&nmk_chip->chip);
-	kfree(nmk_chip);
-	amba_release_regions(dev);
-	return 0;
-}
-
-
-/* We have 0x1f080060 and 0x1f180060, accept both using the mask */
-static struct amba_id nmk_gpio_ids[] = {
-	{
-		.id	= 0x1f080060,
-		.mask	= 0xffefffff,
-	},
-	{0, 0},
-};
-
-static struct amba_driver nmk_gpio_driver = {
-	.drv = {
-		.owner = THIS_MODULE,
-		.name = "gpio",
-		},
-	.probe = nmk_gpio_probe,
-	.remove = nmk_gpio_remove,
-	.suspend = NULL, /* to be done */
-	.resume = NULL,
-	.id_table = nmk_gpio_ids,
-};
-
-static int __init nmk_gpio_init(void)
-{
-	return amba_driver_register(&nmk_gpio_driver);
-}
-
-arch_initcall(nmk_gpio_init);
-
-MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
-MODULE_DESCRIPTION("Nomadik GPIO Driver");
-MODULE_LICENSE("GPL");
-
-
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/include/mach/gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/include/mach/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/include/mach/gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/include/mach/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,71 +1,6 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
 #ifndef __ASM_ARCH_GPIO_H
 #define __ASM_ARCH_GPIO_H
 
-#include <asm-generic/gpio.h>
-
-/*
- * These currently cause a function call to happen, they may be optimized
- * if needed by adding cpu-specific defines to identify blocks
- * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
- */
-#define gpio_get_value  __gpio_get_value
-#define gpio_set_value  __gpio_set_value
-#define gpio_cansleep   __gpio_cansleep
-#define gpio_to_irq     __gpio_to_irq
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT	0x00
-#define NMK_GPIO_DATS	0x04
-#define NMK_GPIO_DATC	0x08
-#define NMK_GPIO_PDIS	0x0c
-#define NMK_GPIO_DIR	0x10
-#define NMK_GPIO_DIRS	0x14
-#define NMK_GPIO_DIRC	0x18
-#define NMK_GPIO_SLPC	0x1c
-#define NMK_GPIO_AFSLA	0x20
-#define NMK_GPIO_AFSLB	0x24
-
-#define NMK_GPIO_RIMSC	0x40
-#define NMK_GPIO_FIMSC	0x44
-#define NMK_GPIO_IS	0x48
-#define NMK_GPIO_IC	0x4c
-#define NMK_GPIO_RWIMSC	0x50
-#define NMK_GPIO_FWIMSC	0x54
-#define NMK_GPIO_WKS	0x58
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO	0
-#define NMK_GPIO_ALT_A	1
-#define NMK_GPIO_ALT_B	2
-#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
-extern int nmk_gpio_get_mode(int gpio);
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
-	char *name;
-	int first_gpio;
-	int first_irq;
-	int parent_irq;
-};
+#include <plat/gpio.h>
 
 #endif /* __ASM_ARCH_GPIO_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -6,6 +6,7 @@
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
 	select NOMADIK_8815
 	select HAS_MTU
+	select NOMADIK_GPIO
 
 endmenu
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-nomadik/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-nomadik/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -7,7 +7,7 @@
 
 # Object file lists.
 
-obj-y			+= clock.o gpio.o
+obj-y			+= clock.o
 
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ns9xxx/include/mach/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-ns9xxx/include/mach/debug-macro.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ns9xxx/include/mach/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -8,6 +8,7 @@
  * the Free Software Foundation.
  */
 #include <mach/hardware.h>
+#include <asm/memory.h>
 
 #include <mach/regs-board-a9m9750dev.h>
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ns9xxx/include/mach/uncompress.h linux-libre-2.6.35-gnu/arch/arm/mach-ns9xxx/include/mach/uncompress.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ns9xxx/include/mach/uncompress.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ns9xxx/include/mach/uncompress.h	2010-08-01 18:11:14.000000000 -0400
@@ -20,50 +20,49 @@
 	/* nothing */
 }
 
+static int timeout;
+
 static void putc_ns9360(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (__raw_readl(base + 8) & (1 << 3)) {
 			__raw_writeb(c, base + 16);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 }
 
 static void putc_a9m9750dev(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (__raw_readb(base + 5) & (1 << 5)) {
 			__raw_writeb(c, base);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 
 }
 
 static void putc_ns921x(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (!(__raw_readl(base) & (1 << 11))) {
 			__raw_writeb(c, base + 0x0028);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 }
 
 #define MSCS __REG(0xA0900184)
@@ -89,6 +88,7 @@
 
 static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
 {
+	timeout = 0x10000;
 	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
 		/* ns9360 or ns9750 */
 		if (NS9360_UART_ENABLED(NS9360_UARTA)) {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap1/ams-delta-fiq.c linux-libre-2.6.35-gnu/arch/arm/mach-omap1/ams-delta-fiq.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap1/ams-delta-fiq.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap1/ams-delta-fiq.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,155 @@
+/*
+ *  Amstrad E3 FIQ handling
+ *
+ *  Copyright (C) 2009 Janusz Krzysztofik
+ *  Copyright (c) 2006 Matt Callow
+ *  Copyright (c) 2004 Amstrad Plc
+ *  Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c
+ * in the MontaVista 2.4 kernel (and the Amstrad changes therein)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <plat/board-ams-delta.h>
+
+#include <asm/fiq.h>
+#include <mach/ams-delta-fiq.h>
+
+static struct fiq_handler fh = {
+	.name	= "ams-delta-fiq"
+};
+
+/*
+ * This buffer is shared between FIQ and IRQ contexts.
+ * The FIQ and IRQ isrs can both read and write it.
+ * It is structured as a header section several 32bit slots,
+ * followed by the circular buffer where the FIQ isr stores
+ * keystrokes received from the qwerty keyboard.
+ * See ams-delta-fiq.h for details of offsets.
+ */
+unsigned int fiq_buffer[1024];
+EXPORT_SYMBOL(fiq_buffer);
+
+static unsigned int irq_counter[16];
+
+static irqreturn_t deferred_fiq(int irq, void *dev_id)
+{
+	struct irq_desc *irq_desc;
+	struct irq_chip *irq_chip = NULL;
+	int gpio, irq_num, fiq_count;
+
+	irq_desc = irq_to_desc(IH_GPIO_BASE);
+	if (irq_desc)
+		irq_chip = irq_desc->chip;
+
+	/*
+	 * For each handled GPIO interrupt, keep calling its interrupt handler
+	 * until the IRQ counter catches the FIQ incremented interrupt counter.
+	 */
+	for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK;
+			gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) {
+		irq_num = gpio_to_irq(gpio);
+		fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio];
+
+		while (irq_counter[gpio] < fiq_count) {
+			if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
+				/*
+				 * It looks like handle_edge_irq() that
+				 * OMAP GPIO edge interrupts default to,
+				 * expects interrupt already unmasked.
+				 */
+				if (irq_chip && irq_chip->unmask)
+					irq_chip->unmask(irq_num);
+			}
+			generic_handle_irq(irq_num);
+
+			irq_counter[gpio]++;
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+void __init ams_delta_init_fiq(void)
+{
+	void *fiqhandler_start;
+	unsigned int fiqhandler_length;
+	struct pt_regs FIQ_regs;
+	unsigned long val, offset;
+	int i, retval;
+
+	fiqhandler_start = &qwerty_fiqin_start;
+	fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start;
+	pr_info("Installing fiq handler from %p, length 0x%x\n",
+			fiqhandler_start, fiqhandler_length);
+
+	retval = claim_fiq(&fh);
+	if (retval) {
+		pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n",
+				retval);
+		return;
+	}
+
+	retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq,
+			IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0);
+	if (retval < 0) {
+		pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval);
+		release_fiq(&fh);
+		return;
+	}
+	/*
+	 * Since no set_type() method is provided by OMAP irq chip,
+	 * switch to edge triggered interrupt type manually.
+	 */
+	offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4;
+	val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1);
+	omap_writel(val, DEFERRED_FIQ_IH_BASE + offset);
+
+	set_fiq_handler(fiqhandler_start, fiqhandler_length);
+
+	/*
+	 * Initialise the buffer which is shared
+	 * between FIQ mode and IRQ mode
+	 */
+	fiq_buffer[FIQ_GPIO_INT_MASK]	= 0;
+	fiq_buffer[FIQ_MASK]		= 0;
+	fiq_buffer[FIQ_STATE]		= 0;
+	fiq_buffer[FIQ_KEY]		= 0;
+	fiq_buffer[FIQ_KEYS_CNT]	= 0;
+	fiq_buffer[FIQ_KEYS_HICNT]	= 0;
+	fiq_buffer[FIQ_TAIL_OFFSET]	= 0;
+	fiq_buffer[FIQ_HEAD_OFFSET]	= 0;
+	fiq_buffer[FIQ_BUF_LEN]		= 256;
+	fiq_buffer[FIQ_MISSED_KEYS]	= 0;
+	fiq_buffer[FIQ_BUFFER_START]	=
+			(unsigned int) &fiq_buffer[FIQ_CIRC_BUFF];
+
+	for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++)
+		fiq_buffer[i] = 0;
+
+	/*
+	 * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr
+	 * will run in an unpredictable context. The fiq_buffer is the FIQ isr's
+	 * only means of communication with the IRQ level and other kernel
+	 * context code.
+	 */
+	FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer;
+	set_fiq_regs(&FIQ_regs);
+
+	pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer);
+
+	/*
+	 * Redirect GPIO interrupts to FIQ
+	 */
+	offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4;
+	val = omap_readl(OMAP_IH1_BASE + offset) | 1;
+	omap_writel(val, OMAP_IH1_BASE + offset);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap1/ams-delta-fiq-handler.S linux-libre-2.6.35-gnu/arch/arm/mach-omap1/ams-delta-fiq-handler.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap1/ams-delta-fiq-handler.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap1/ams-delta-fiq-handler.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,278 @@
+/*
+ *  linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+ *
+ *  Based on  linux/arch/arm/lib/floppydma.S
+ *  Renamed and modified to work with 2.6 kernel by Matt Callow
+ *  Copyright (C) 1995, 1996 Russell King
+ *  Copyright (C) 2004 Pete Trapps
+ *  Copyright (C) 2006 Matt Callow
+ *  Copyright (C) 2010 Janusz Krzysztofik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+#include <plat/io.h>
+#include <plat/board-ams-delta.h>
+
+#include <mach/ams-delta-fiq.h>
+
+/*
+ * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
+ * Unfortunately, those were not placed in a separate header file.
+ */
+#define OMAP1510_GPIO_BASE		0xFFFCE000
+#define OMAP1510_GPIO_DATA_INPUT	0x00
+#define OMAP1510_GPIO_DATA_OUTPUT	0x04
+#define OMAP1510_GPIO_DIR_CONTROL	0x08
+#define OMAP1510_GPIO_INT_CONTROL	0x0c
+#define OMAP1510_GPIO_INT_MASK		0x10
+#define OMAP1510_GPIO_INT_STATUS	0x14
+#define OMAP1510_GPIO_PIN_CONTROL	0x18
+
+/* GPIO register bitmasks */
+#define KEYBRD_DATA_MASK		(0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA)
+#define KEYBRD_CLK_MASK			(0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK)
+#define MODEM_IRQ_MASK			(0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ)
+#define HOOK_SWITCH_MASK		(0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH)
+#define OTHERS_MASK			(MODEM_IRQ_MASK | HOOK_SWITCH_MASK)
+
+/* IRQ handler register bitmasks */
+#define DEFERRED_FIQ_MASK		(0x1 << (INT_DEFERRED_FIQ % IH2_BASE))
+#define GPIO_BANK1_MASK  		(0x1 << INT_GPIO_BANK1)
+
+/* Driver buffer byte offsets */
+#define BUF_MASK			(FIQ_MASK * 4)
+#define BUF_STATE			(FIQ_STATE * 4)
+#define BUF_KEYS_CNT			(FIQ_KEYS_CNT * 4)
+#define BUF_TAIL_OFFSET			(FIQ_TAIL_OFFSET * 4)
+#define BUF_HEAD_OFFSET			(FIQ_HEAD_OFFSET * 4)
+#define BUF_BUF_LEN			(FIQ_BUF_LEN * 4)
+#define BUF_KEY				(FIQ_KEY * 4)
+#define BUF_MISSED_KEYS			(FIQ_MISSED_KEYS * 4)
+#define BUF_BUFFER_START		(FIQ_BUFFER_START * 4)
+#define BUF_GPIO_INT_MASK		(FIQ_GPIO_INT_MASK * 4)
+#define BUF_KEYS_HICNT			(FIQ_KEYS_HICNT * 4)
+#define BUF_IRQ_PEND			(FIQ_IRQ_PEND * 4)
+#define BUF_SIR_CODE_L1			(FIQ_SIR_CODE_L1 * 4)
+#define BUF_SIR_CODE_L2			(IRQ_SIR_CODE_L2 * 4)
+#define BUF_CNT_INT_00			(FIQ_CNT_INT_00 * 4)
+#define BUF_CNT_INT_KEY			(FIQ_CNT_INT_KEY * 4)
+#define BUF_CNT_INT_MDM			(FIQ_CNT_INT_MDM * 4)
+#define BUF_CNT_INT_03			(FIQ_CNT_INT_03 * 4)
+#define BUF_CNT_INT_HSW			(FIQ_CNT_INT_HSW * 4)
+#define BUF_CNT_INT_05			(FIQ_CNT_INT_05 * 4)
+#define BUF_CNT_INT_06			(FIQ_CNT_INT_06 * 4)
+#define BUF_CNT_INT_07			(FIQ_CNT_INT_07 * 4)
+#define BUF_CNT_INT_08			(FIQ_CNT_INT_08 * 4)
+#define BUF_CNT_INT_09			(FIQ_CNT_INT_09 * 4)
+#define BUF_CNT_INT_10			(FIQ_CNT_INT_10 * 4)
+#define BUF_CNT_INT_11			(FIQ_CNT_INT_11 * 4)
+#define BUF_CNT_INT_12			(FIQ_CNT_INT_12 * 4)
+#define BUF_CNT_INT_13			(FIQ_CNT_INT_13 * 4)
+#define BUF_CNT_INT_14			(FIQ_CNT_INT_14 * 4)
+#define BUF_CNT_INT_15			(FIQ_CNT_INT_15 * 4)
+#define BUF_CIRC_BUFF			(FIQ_CIRC_BUFF * 4)
+
+
+/*
+ * Register useage
+ * r8  - temporary
+ * r9  - the driver buffer
+ * r10 - temporary
+ * r11 - interrupts mask
+ * r12 - base pointers
+ * r13 - interrupts status
+ */
+
+	.text
+
+	.global qwerty_fiqin_end
+
+ENTRY(qwerty_fiqin_start)
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+	@ FIQ intrrupt handler
+	ldr r12, omap_ih1_base			@ set pointer to level1 handler
+
+	ldr r11, [r12, #IRQ_MIR_REG_OFFSET]	@ fetch interrupts mask
+
+	ldr r13, [r12, #IRQ_ITR_REG_OFFSET]	@ fetch interrupts status
+	bics r13, r13, r11			@ clear masked - any left?
+	beq exit				@ none - spurious FIQ? exit
+
+	ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET]	@ get requested interrupt number
+
+	mov r8, #2				@ reset FIQ agreement
+	str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
+
+	cmp r10, #INT_GPIO_BANK1		@ is it GPIO bank interrupt?
+	beq gpio				@ yes - process it
+
+	mov r8, #1
+	orr r8, r11, r8, lsl r10		@ mask spurious interrupt
+	str r8, [r12, #IRQ_MIR_REG_OFFSET]
+exit:
+	subs	pc, lr, #4			@ return from FIQ
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@
+gpio:	@ GPIO bank interrupt handler
+	ldr r12, omap1510_gpio_base		@ set base pointer to GPIO bank
+
+	ldr r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ fetch GPIO interrupts mask
+restart:
+	ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS]	@ fetch status bits
+	bics r13, r13, r11			@ clear masked - any left?
+	beq exit				@ no - spurious interrupt? exit
+
+	orr r11, r11, r13			@ mask all requested interrupts
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
+
+	ands r10, r13, #KEYBRD_CLK_MASK		@ extract keyboard status - set?
+	beq hksw				@ no - try next source
+
+
+	@@@@@@@@@@@@@@@@@@@@@@
+	@ Keyboard clock FIQ mode interrupt handler
+	@ r10 now contains KEYBRD_CLK_MASK, use it
+	str r10, [r12, #OMAP1510_GPIO_INT_STATUS]	@ ack the interrupt
+	bic r11, r11, r10				@ unmask it
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
+
+	@ Process keyboard data
+	ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT]	@ fetch GPIO input
+
+	ldr r10, [r9, #BUF_STATE]		@ fetch kbd interface state
+	cmp r10, #0				@ are we expecting start bit?
+	bne data				@ no - go to data processing
+
+	ands r8, r8, #KEYBRD_DATA_MASK		@ check start bit - detected?
+	beq hksw				@ no - try next source
+
+	@ r8 contains KEYBRD_DATA_MASK, use it
+	str r8, [r9, #BUF_STATE]		@ enter data processing state
+	@ r10 already contains 0, reuse it
+	str r10, [r9, #BUF_KEY]			@ clear keycode
+	mov r10, #2				@ reset input bit mask
+	str r10, [r9, #BUF_MASK]
+
+	@ Mask other GPIO line interrupts till key done
+	str r11, [r9, #BUF_GPIO_INT_MASK]	@ save mask for later restore
+	mvn r11, #KEYBRD_CLK_MASK		@ prepare all except kbd mask
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ store into the mask register
+
+	b restart				@ restart
+
+data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
+
+	@ r8 still contains GPIO input bits
+	ands r8, r8, #KEYBRD_DATA_MASK		@ is keyboard data line low?
+	ldreq r8, [r9, #BUF_KEY]		@ yes - fetch collected so far,
+	orreq r8, r8, r10			@ set 1 at current mask position
+	streq r8, [r9, #BUF_KEY]		@ and save back
+
+	mov r10, r10, lsl #1			@ shift mask left
+	bics r10, r10, #0x800			@ have we got all the bits?
+	strne r10, [r9, #BUF_MASK]		@ not yet - store the mask
+	bne restart				@ and restart
+
+	@ r10 already contains 0, reuse it
+	str r10, [r9, #BUF_STATE]		@ reset state to start
+
+	@ Key done - restore interrupt mask
+	ldr r10, [r9, #BUF_GPIO_INT_MASK]	@ fetch saved mask
+	and r11, r11, r10			@ unmask all saved as unmasked
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ restore into the mask register
+
+	@ Try appending the keycode to the circular buffer
+	ldr r10, [r9, #BUF_KEYS_CNT]		@ get saved keystrokes count
+	ldr r8, [r9, #BUF_BUF_LEN]		@ get buffer size
+	cmp r10, r8				@ is buffer full?
+	beq hksw				@ yes - key lost, next source
+
+	add r10, r10, #1			@ incremet keystrokes counter
+	str r10, [r9, #BUF_KEYS_CNT]
+
+	ldr r10, [r9, #BUF_TAIL_OFFSET]		@ get buffer tail offset
+	@ r8 already contains buffer size
+	cmp r10, r8				@ end of buffer?
+	moveq r10, #0				@ yes - rewind to buffer start
+
+	ldr r12, [r9, #BUF_BUFFER_START]	@ get buffer start address
+	add r12, r12, r10, LSL #2		@ calculate buffer tail address
+	ldr r8, [r9, #BUF_KEY]			@ get last keycode
+	str r8, [r12]				@ append it to the buffer tail
+
+	add r10, r10, #1			@ increment buffer tail offset
+	str r10, [r9, #BUF_TAIL_OFFSET]
+
+	ldr r10, [r9, #BUF_CNT_INT_KEY]		@ increment interrupts counter
+	add r10, r10, #1
+	str r10, [r9, #BUF_CNT_INT_KEY]
+	@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+hksw:	@Is hook switch interrupt requested?
+	tst r13, #HOOK_SWITCH_MASK 		@ is hook switch status bit set?
+	beq mdm					@ no - try next source
+
+
+	@@@@@@@@@@@@@@@@@@@@@@@@
+	@ Hook switch interrupt FIQ mode simple handler
+
+	@ Don't toggle active edge, the switch always bounces
+
+	@ Increment hook switch interrupt counter
+	ldr r10, [r9, #BUF_CNT_INT_HSW]
+	add r10, r10, #1
+	str r10, [r9, #BUF_CNT_INT_HSW]
+	@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+mdm:	@Is it a modem interrupt?
+	tst r13, #MODEM_IRQ_MASK 		@ is modem status bit set?
+	beq irq					@ no - check for next interrupt
+
+
+	@@@@@@@@@@@@@@@@@@@@@@@@
+	@ Modem FIQ mode interrupt handler stub
+
+	@ Increment modem interrupt counter
+	ldr r10, [r9, #BUF_CNT_INT_MDM]
+	add r10, r10, #1
+	str r10, [r9, #BUF_CNT_INT_MDM]
+	@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+irq:	@ Place deferred_fiq interrupt request
+	ldr r12, deferred_fiq_ih_base		@ set pointer to IRQ handler
+	mov r10, #DEFERRED_FIQ_MASK		@ set deferred_fiq bit
+	str r10, [r12, #IRQ_ISR_REG_OFFSET] 	@ place it in the ISR register
+
+	ldr r12, omap1510_gpio_base		@ set pointer back to GPIO bank
+	b restart				@ check for next GPIO interrupt
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+/*
+ * Virtual addresses for IO
+ */
+omap_ih1_base:
+	.word OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
+deferred_fiq_ih_base:
+	.word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE)
+omap1510_gpio_base:
+	.word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE)
+qwerty_fiqin_end:
+
+/*
+ * Check the size of the FIQ,
+ * it cannot go beyond 0xffff0200, and is copied to 0xffff001c
+ */
+.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c)
+	.err
+.endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap1/board-ams-delta.c linux-libre-2.6.35-gnu/arch/arm/mach-omap1/board-ams-delta.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap1/board-ams-delta.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap1/board-ams-delta.c	2010-08-01 18:11:14.000000000 -0400
@@ -33,6 +33,8 @@
 #include <plat/board.h>
 #include <plat/common.h>
 
+#include <mach/ams-delta-fiq.h>
+
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
 
@@ -236,6 +238,10 @@
 	omap_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
+#ifdef CONFIG_AMS_DELTA_FIQ
+	ams_delta_init_fiq();
+#endif
+
 	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 }
 
@@ -263,8 +269,18 @@
 
 static int __init ams_delta_modem_init(void)
 {
+	int err;
+
 	omap_cfg_reg(M14_1510_GPIO2);
-	ams_delta_modem_ports[0].irq = gpio_to_irq(2);
+	ams_delta_modem_ports[0].irq =
+			gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+
+	err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
+	if (err) {
+		pr_err("Couldn't request gpio pin for modem\n");
+		return err;
+	}
+	gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
 
 	ams_delta_latch2_write(
 		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap1/board-htcherald.c linux-libre-2.6.35-gnu/arch/arm/mach-omap1/board-htcherald.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap1/board-htcherald.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap1/board-htcherald.c	2010-08-01 18:11:14.000000000 -0400
@@ -28,7 +28,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/bootmem.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap1/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-omap1/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap1/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap1/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -578,7 +578,7 @@
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 
-void __init omap1_clk_disable_unused(struct clk *clk)
+void omap1_clk_disable_unused(struct clk *clk)
 {
 	__u32 regval32;
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap1/clock.h linux-libre-2.6.35-gnu/arch/arm/mach-omap1/clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap1/clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap1/clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -39,7 +39,7 @@
 extern unsigned long omap1_watchdog_recalc(struct clk *clk);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
-extern void __init omap1_clk_disable_unused(struct clk *clk);
+extern void omap1_clk_disable_unused(struct clk *clk);
 #else
 #define omap1_clk_disable_unused	NULL
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h linux-libre-2.6.35-gnu/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-omap1/include/ams-delta-fiq.h
+ *
+ * Taken from the original Amstrad modifications to fiq.h
+ *
+ * Copyright (c) 2004 Amstrad Plc
+ * Copyright (c) 2006 Matt Callow
+ * Copyright (c) 2010 Janusz Krzysztofik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __AMS_DELTA_FIQ_H
+#define __AMS_DELTA_FIQ_H
+
+#include <plat/irqs.h>
+
+/*
+ * Interrupt number used for passing control from FIQ to IRQ.
+ * IRQ12, described as reserved, has been selected.
+ */
+#define INT_DEFERRED_FIQ	INT_1510_RES12
+/*
+ * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to.
+ */
+#if (INT_DEFERRED_FIQ < IH2_BASE)
+#define DEFERRED_FIQ_IH_BASE	OMAP_IH1_BASE
+#else
+#define DEFERRED_FIQ_IH_BASE	OMAP_IH2_BASE
+#endif
+
+/*
+ * These are the offsets from the begining of the fiq_buffer. They are put here
+ * since the buffer and header need to be accessed by drivers servicing devices
+ * which generate GPIO interrupts - e.g. keyboard, modem, hook switch.
+ */
+#define FIQ_MASK		 0
+#define FIQ_STATE		 1
+#define FIQ_KEYS_CNT		 2
+#define FIQ_TAIL_OFFSET		 3
+#define FIQ_HEAD_OFFSET		 4
+#define FIQ_BUF_LEN		 5
+#define FIQ_KEY			 6
+#define FIQ_MISSED_KEYS		 7
+#define FIQ_BUFFER_START	 8
+#define FIQ_GPIO_INT_MASK	 9
+#define FIQ_KEYS_HICNT		10
+#define FIQ_IRQ_PEND		11
+#define FIQ_SIR_CODE_L1		12
+#define IRQ_SIR_CODE_L2		13
+
+#define FIQ_CNT_INT_00		14
+#define FIQ_CNT_INT_KEY		15
+#define FIQ_CNT_INT_MDM		16
+#define FIQ_CNT_INT_03		17
+#define FIQ_CNT_INT_HSW		18
+#define FIQ_CNT_INT_05		19
+#define FIQ_CNT_INT_06		20
+#define FIQ_CNT_INT_07		21
+#define FIQ_CNT_INT_08		22
+#define FIQ_CNT_INT_09		23
+#define FIQ_CNT_INT_10		24
+#define FIQ_CNT_INT_11		25
+#define FIQ_CNT_INT_12		26
+#define FIQ_CNT_INT_13		27
+#define FIQ_CNT_INT_14		28
+#define FIQ_CNT_INT_15		29
+
+#define FIQ_CIRC_BUFF		30      /*Start of circular buffer */
+
+#ifndef __ASSEMBLER__
+extern unsigned int fiq_buffer[];
+extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end;
+
+extern void __init ams_delta_init_fiq(void);
+#endif
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap1/include/mach/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-omap1/include/mach/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap1/include/mach/debug-macro.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap1/include/mach/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -13,6 +13,8 @@
 
 #include <linux/serial_reg.h>
 
+#include <asm/memory.h>
+
 #include <plat/serial.h>
 
 		.pushsection .data
@@ -37,23 +39,12 @@
 		cmp	\rx, #0			@ is port configured?
 		bne	99f			@ already configured
 
-		/* Check 7XX UART1 scratchpad register for uart to use */
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xff000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000	@ OMAP1UART1
-		ldrb	\rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)]
-		cmp	\rx, #0			@ anything in 7XX scratchpad?
-		bne	10f			@ found 7XX uart
-
-		/* Check 15xx/16xx UART1 scratchpad register for uart to use */
+		/* Check the debug UART configuration set in uncompress.h */
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xff000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000	@ OMAP1UART1
-		ldrb	\rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)]
+		ldreq	\rx, =OMAP_UART_INFO
+		ldrne	\rx, =__phys_to_virt(OMAP_UART_INFO)
+		ldr	\rx, [\rx, #0]
 
 		/* Select the UART to use based on the UART1 scratchpad value */
 10:		cmp	\rx, #0			@ no port configured?
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap1/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-omap1/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap1/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap1/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -152,6 +152,16 @@
 	  Support for the Amstrad E3 (codename Delta) videophone. Say Y here
 	  if you have such a device.
 
+config AMS_DELTA_FIQ
+	bool "Fast Interrupt Request (FIQ) support for the E3"
+	depends on MACH_AMS_DELTA
+	select FIQ
+	help
+	  Provide a FIQ handler for the E3.
+	  This allows for fast handling of interrupts generated
+	  by the clock line of the E3 mailboard (or a PS/2 keyboard)
+	  connected to the GPIO based external keyboard port.
+
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap1/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-omap1/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap1/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap1/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -37,6 +37,7 @@
 obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
+obj-$(CONFIG_AMS_DELTA_FIQ)		+= ams-delta-fiq.o ams-delta-fiq-handler.o
 obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
 obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-2430sdp.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-2430sdp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-2430sdp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-2430sdp.c	2010-08-01 18:11:14.000000000 -0400
@@ -174,9 +174,18 @@
 	},
 };
 
+static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("isp1301_omap", 0x2D),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = OMAP_GPIO_IRQ(78),
+	},
+};
+
 static int __init omap2430_i2c_init(void)
 {
-	omap_register_i2c_bus(1, 400, NULL, 0);
+	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
+			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
 	omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo,
 			ARRAY_SIZE(sdp2430_i2c_boardinfo));
 	return 0;
@@ -198,6 +207,15 @@
 	.mode			= MUSB_OTG,
 	.power			= 100,
 };
+static struct omap_usb_config sdp2430_usb_config __initdata = {
+	.otg		= 1,
+#ifdef  CONFIG_USB_GADGET_OMAP
+	.hmc_mode	= 0x0,
+#elif   defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	.hmc_mode	= 0x1,
+#endif
+	.pins[0]	= 3,
+};
 
 static void __init omap_2430sdp_init(void)
 {
@@ -208,6 +226,7 @@
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
 	omap2_hsmmc_init(mmc);
+	omap_usb_init(&sdp2430_usb_config);
 	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-3430sdp.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-3430sdp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-3430sdp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-3430sdp.c	2010-08-01 18:11:14.000000000 -0400
@@ -137,9 +137,7 @@
 	}
 
 	gpio_direction_input(ts_gpio);
-
-	omap_set_gpio_debounce(ts_gpio, 1);
-	omap_set_gpio_debounce_time(ts_gpio, 0xa);
+	gpio_set_debounce(ts_gpio, 310);
 }
 
 static int ads7846_get_pendown_state(void)
@@ -150,6 +148,7 @@
 static struct ads7846_platform_data tsc2046_config __initdata = {
 	.get_pendown_state	= ads7846_get_pendown_state,
 	.keep_vref_on		= 1,
+	.wakeup				= true,
 };
 
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-4430sdp.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-4430sdp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-4430sdp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-4430sdp.c	2010-08-01 18:11:14.000000000 -0400
@@ -18,8 +18,12 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
 
 #include <mach/hardware.h>
+#include <mach/omap4-common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -29,8 +33,77 @@
 #include <plat/control.h>
 #include <plat/timer-gp.h>
 #include <plat/usb.h>
-#include <asm/hardware/gic.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <plat/mmc.h>
+#include "hsmmc.h"
+
+#define ETH_KS8851_IRQ			34
+#define ETH_KS8851_POWER_ON		48
+#define ETH_KS8851_QUART		138
+
+static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
+	{
+		.modalias               = "ks8851",
+		.bus_num                = 1,
+		.chip_select            = 0,
+		.max_speed_hz           = 24000000,
+		.irq                    = ETH_KS8851_IRQ,
+	},
+};
+
+static int omap_ethernet_init(void)
+{
+	int status;
+
+	/* Request of GPIO lines */
+
+	status = gpio_request(ETH_KS8851_POWER_ON, "eth_power");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON);
+		return status;
+	}
+
+	status = gpio_request(ETH_KS8851_QUART, "quart");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART);
+		goto error1;
+	}
+
+	status = gpio_request(ETH_KS8851_IRQ, "eth_irq");
+	if (status) {
+		pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ);
+		goto error2;
+	}
+
+	/* Configuration of requested GPIO lines */
+
+	status = gpio_direction_output(ETH_KS8851_POWER_ON, 1);
+	if (status) {
+		pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ);
+		goto error3;
+	}
+
+	status = gpio_direction_output(ETH_KS8851_QUART, 1);
+	if (status) {
+		pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART);
+		goto error3;
+	}
+
+	status = gpio_direction_input(ETH_KS8851_IRQ);
+	if (status) {
+		pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ);
+		goto error3;
+	}
+
+	return 0;
+
+error3:
+	gpio_free(ETH_KS8851_IRQ);
+error2:
+	gpio_free(ETH_KS8851_QUART);
+error1:
+	gpio_free(ETH_KS8851_POWER_ON);
+	return status;
+}
 
 static struct platform_device sdp4430_lcd_device = {
 	.name		= "sdp4430_lcd",
@@ -49,50 +122,6 @@
 	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
 };
 
-#ifdef CONFIG_CACHE_L2X0
-static int __init omap_l2_cache_init(void)
-{
-	extern void omap_smc1(u32 fn, u32 arg);
-	void __iomem *l2cache_base;
-
-	/* To avoid code running on other OMAPs in
-	 * multi-omap builds
-	 */
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
-
-	/* Static mapping, never released */
-	l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
-	BUG_ON(!l2cache_base);
-
-	/* Enable PL310 L2 Cache controller */
-	omap_smc1(0x102, 0x1);
-
-	/* 32KB way size, 16-way associativity,
-	* parity disabled
-	*/
-	l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
-
-	return 0;
-}
-early_initcall(omap_l2_cache_init);
-#endif
-
-static void __init gic_init_irq(void)
-{
-	void __iomem *base;
-
-	/* Static mapping, never released */
-	base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
-	BUG_ON(!base);
-	gic_dist_init(0, base, 29);
-
-	/* Static mapping, never released */
-	gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
-	BUG_ON(!gic_cpu_base_addr);
-	gic_cpu_init(0, gic_cpu_base_addr);
-}
-
 static void __init omap_4430sdp_init_irq(void)
 {
 	omap_board_config = sdp4430_config;
@@ -111,15 +140,254 @@
 	.power			= 100,
 };
 
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 8,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 8,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.nonremovable   = true,
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
+	{
+		.supply = "vmmc",
+		.dev_name = "mmci-omap-hs.0",
+	},
+	{
+		.supply = "vmmc",
+		.dev_name = "mmci-omap-hs.1",
+	},
+};
+
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+	int ret = 0;
+	struct platform_device *pdev = container_of(dev,
+				struct platform_device, dev);
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	/* Setting MMC1 Card detect Irq */
+	if (pdev->id == 0)
+		pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
+						MMCDETECT_INTR_OFFSET;
+	return ret;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	pdata->init =	omap4_twl6030_hsmmc_late_init;
+}
+
+static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+
+	omap2_hsmmc_init(controllers);
+	for (c = controllers; c->mmc; c++)
+		omap4_twl6030_hsmmc_set_late_init(c->dev);
+
+	return 0;
+}
+
+static struct regulator_init_data sdp4430_vaux1 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vaux2 = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vaux3 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VMMC1 for MMC1 card */
+static struct regulator_init_data sdp4430_vmmc = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 2,
+	.consumer_supplies      = sdp4430_vmmc_supply,
+};
+
+static struct regulator_init_data sdp4430_vpp = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 2500000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vusim = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2900000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vana = {
+	.constraints = {
+		.min_uV			= 2100000,
+		.max_uV			= 2100000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vcxio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data sdp4430_vusb = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct twl4030_platform_data sdp4430_twldata = {
+	.irq_base	= TWL6030_IRQ_BASE,
+	.irq_end	= TWL6030_IRQ_END,
+
+	/* Regulators */
+	.vmmc		= &sdp4430_vmmc,
+	.vpp		= &sdp4430_vpp,
+	.vusim		= &sdp4430_vusim,
+	.vana		= &sdp4430_vana,
+	.vcxio		= &sdp4430_vcxio,
+	.vdac		= &sdp4430_vdac,
+	.vusb		= &sdp4430_vusb,
+	.vaux1		= &sdp4430_vaux1,
+	.vaux2		= &sdp4430_vaux2,
+	.vaux3		= &sdp4430_vaux3,
+};
+
+static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl6030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = OMAP44XX_IRQ_SYS_1N,
+		.platform_data = &sdp4430_twldata,
+	},
+};
+static int __init omap4_i2c_init(void)
+{
+	/*
+	 * Phoenix Audio IC needs I2C1 to
+	 * start with 400 KHz or less
+	 */
+	omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo,
+			ARRAY_SIZE(sdp4430_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(4, 400, NULL, 0);
+	return 0;
+}
 static void __init omap_4430sdp_init(void)
 {
+	int status;
+
+	omap4_i2c_init();
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 	omap_serial_init();
+	omap4_twl6030_hsmmc_init(mmc);
 	/* OMAP4 SDP uses internal transceiver so register nop transceiver */
 	usb_nop_xceiv_register();
 	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
 	if (!cpu_is_omap44xx())
 		usb_musb_init(&musb_board_data);
+
+	status = omap_ethernet_init();
+	if (status) {
+		pr_err("Ethernet initialization failed: %d\n", status);
+	} else {
+		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
+		spi_register_board_info(sdp4430_spi_board_info,
+				ARRAY_SIZE(sdp4430_spi_board_info));
+	}
 }
 
 static void __init omap_4430sdp_map_io(void)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-am3517evm.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-am3517evm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-am3517evm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-am3517evm.c	2010-08-01 18:11:14.000000000 -0400
@@ -21,6 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/can/platform/ti_hecc.h>
+#include <linux/davinci_emac.h>
 
 #include <mach/hardware.h>
 #include <mach/am35xx.h>
@@ -30,16 +32,111 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
+#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/display.h>
 
 #include "mux.h"
 
+#define AM35XX_EVM_PHY_MASK		(0xF)
+#define AM35XX_EVM_MDIO_FREQUENCY	(1000000)
+
+static struct emac_platform_data am3517_evm_emac_pdata = {
+	.phy_mask	= AM35XX_EVM_PHY_MASK,
+	.mdio_max_freq	= AM35XX_EVM_MDIO_FREQUENCY,
+	.rmii_en	= 1,
+};
+
+static struct resource am3517_emac_resources[] = {
+	{
+		.start  = AM35XX_IPSS_EMAC_BASE,
+		.end    = AM35XX_IPSS_EMAC_BASE + 0x3FFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+		.end    = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am3517_emac_device = {
+	.name		= "davinci_emac",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(am3517_emac_resources),
+	.resource	= am3517_emac_resources,
+};
+
+static void am3517_enable_ethernet_int(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
+		AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void am3517_disable_ethernet_int(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
+{
+	unsigned int regval;
+
+	pdata->ctrl_reg_offset		= AM35XX_EMAC_CNTRL_OFFSET;
+	pdata->ctrl_mod_reg_offset	= AM35XX_EMAC_CNTRL_MOD_OFFSET;
+	pdata->ctrl_ram_offset		= AM35XX_EMAC_CNTRL_RAM_OFFSET;
+	pdata->mdio_reg_offset		= AM35XX_EMAC_MDIO_OFFSET;
+	pdata->ctrl_ram_size		= AM35XX_EMAC_CNTRL_RAM_SIZE;
+	pdata->version			= EMAC_VERSION_2;
+	pdata->hw_ram_addr		= AM35XX_EMAC_HW_RAM_ADDR;
+	pdata->interrupt_enable		= am3517_enable_ethernet_int;
+	pdata->interrupt_disable	= am3517_disable_ethernet_int;
+	am3517_emac_device.dev.platform_data	= pdata;
+	platform_device_register(&am3517_emac_device);
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+	regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+	return ;
+}
+
+
+
 #define LCD_PANEL_PWR		176
 #define LCD_PANEL_BKLIGHT_PWR	182
 #define LCD_PANEL_PWM		181
 
-static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = {
+static struct i2c_board_info __initdata am3517evm_i2c1_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("s35390a", 0x30),
 		.type		= "s35390a",
@@ -69,7 +166,7 @@
 		gpio_free(GPIO_RTCS35390A_IRQ);
 		return;
 	}
-	am3517evm_i2c_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
+	am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
 }
 
 /*
@@ -80,7 +177,7 @@
 static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES,
 };
-static struct i2c_board_info __initdata am3517evm_tca6416_info_0[] = {
+static struct i2c_board_info __initdata am3517evm_i2c2_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("tca6416", 0x21),
 		.platform_data = &am3517evm_gpio_expander_info_0,
@@ -94,7 +191,7 @@
 static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = {
 	.gpio_base	= OMAP_MAX_GPIO_LINES + 32,
 };
-static struct i2c_board_info __initdata am3517evm_ui_tca6416_info[] = {
+static struct i2c_board_info __initdata am3517evm_i2c3_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("tca6416", 0x20),
 		.platform_data = &am3517evm_ui_gpio_expander_info_1,
@@ -108,10 +205,10 @@
 static int __init am3517_evm_i2c_init(void)
 {
 	omap_register_i2c_bus(1, 400, NULL, 0);
-	omap_register_i2c_bus(2, 400, am3517evm_tca6416_info_0,
-			ARRAY_SIZE(am3517evm_tca6416_info_0));
-	omap_register_i2c_bus(3, 400, am3517evm_ui_tca6416_info,
-			ARRAY_SIZE(am3517evm_ui_tca6416_info));
+	omap_register_i2c_bus(2, 400, am3517evm_i2c2_boardinfo,
+			ARRAY_SIZE(am3517evm_i2c2_boardinfo));
+	omap_register_i2c_bus(3, 400, am3517evm_i2c3_boardinfo,
+			ARRAY_SIZE(am3517evm_i2c3_boardinfo));
 
 	return 0;
 }
@@ -119,6 +216,8 @@
 static int lcd_enabled;
 static int dvi_enabled;
 
+#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
+		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
 static void __init am3517_evm_display_init(void)
 {
 	int r;
@@ -162,6 +261,9 @@
 err_1:
 	gpio_free(LCD_PANEL_BKLIGHT_PWR);
 }
+#else
+static void __init am3517_evm_display_init(void) {}
+#endif
 
 static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
@@ -275,7 +377,12 @@
 
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
+		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+#else
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+#endif
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
 	.phy_reset  = true,
@@ -292,6 +399,42 @@
 #define board_mux	NULL
 #endif
 
+
+static struct resource am3517_hecc_resources[] = {
+	{
+		.start	= AM35XX_IPSS_HECC_BASE,
+		.end	= AM35XX_IPSS_HECC_BASE + 0x3FFF,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_35XX_HECC0_IRQ,
+		.end	= INT_35XX_HECC0_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am3517_hecc_device = {
+	.name		= "ti_hecc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(am3517_hecc_resources),
+	.resource	= am3517_hecc_resources,
+};
+
+static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
+	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
+	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
+	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
+	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
+	.int_line		= AM35XX_HECC_INT_LINE,
+	.version		= AM35XX_HECC_VERSION,
+};
+
+static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
+{
+	am3517_hecc_device.dev.platform_data = pdata;
+	platform_device_register(&am3517_hecc_device);
+}
+
 static void __init am3517_evm_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -305,14 +448,17 @@
 	/* Configure GPIO for EHCI port */
 	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
 	usb_ehci_init(&ehci_pdata);
+	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
 	/* DSS */
 	am3517_evm_display_init();
 
 	/* RTC - S35390A */
 	am3517_evm_rtc_init();
 
-	i2c_register_board_info(1, am3517evm_i2c_boardinfo,
-				ARRAY_SIZE(am3517evm_i2c_boardinfo));
+	i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
+				ARRAY_SIZE(am3517evm_i2c1_boardinfo));
+	/*Ethernet*/
+	am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
 }
 
 static void __init am3517_evm_map_io(void)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-cm-t35.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-cm-t35.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-cm-t35.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-cm-t35.c	2010-08-01 18:11:14.000000000 -0400
@@ -45,6 +45,7 @@
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <plat/display.h>
+#include <plat/mcspi.h>
 
 #include <mach/hardware.h>
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-devkit8000.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-devkit8000.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-devkit8000.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-devkit8000.c	2010-08-01 18:11:14.000000000 -0400
@@ -633,8 +633,163 @@
 	.reset_gpio_port[2]  = -EINVAL
 };
 
+static struct omap_board_mux board_mux[] __initdata = {
+	/* nCS and IRQ for Devkit8000 ethernet */
+	OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0),
+	OMAP3_MUX(ETK_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+	/* McSPI 2*/
+	OMAP3_MUX(MCSPI2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI2_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCSPI2_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI2_CS0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCSPI2_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* PENDOWN GPIO */
+	OMAP3_MUX(ETK_D13, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
+	/* mUSB */
+	OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* USB 1 */
+	OMAP3_MUX(ETK_CTL, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(ETK_D8, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D9, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D0, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D2, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D7, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+
+	/* MMC 1 */
+	OMAP3_MUX(SDMMC1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* McBSP 2 */
+	OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* I2C 1 */
+	OMAP3_MUX(I2C1_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C1_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* I2C 2 */
+	OMAP3_MUX(I2C2_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* I2C 3 */
+	OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* I2C 4 */
+	OMAP3_MUX(I2C4_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C4_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* serial ports */
+	OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* DSS */
+	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* expansion port */
+	/* McSPI 1 */
+	OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP3_MUX(MCSPI1_CS3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+
+	/* HDQ */
+	OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* McSPI4 */
+	OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
+
+	/* MMC 2 */
+	OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+
+	/* I2C3 */
+	OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
+	OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
+	/* TPS IRQ */
+	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
+			OMAP_PIN_INPUT_PULLUP),
+
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
 static void __init devkit8000_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
 
 	omap_dm9000_init();
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-ldp.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-ldp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-ldp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-ldp.c	2010-08-01 18:11:14.000000000 -0400
@@ -209,8 +209,7 @@
 	}
 
 	gpio_direction_input(ts_gpio);
-	omap_set_gpio_debounce(ts_gpio, 1);
-	omap_set_gpio_debounce_time(ts_gpio, 0xa);
+	gpio_set_debounce(ts_gpio, 310);
 }
 
 static int ads7846_get_pendown_state(void)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-omap3beagle.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-omap3beagle.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-omap3beagle.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-omap3beagle.c	2010-08-01 18:11:14.000000000 -0400
@@ -39,6 +39,7 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
+#include <plat/display.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
@@ -106,6 +107,77 @@
 	.resource	= &omap3beagle_nand_resource,
 };
 
+/* DSS */
+
+static int beagle_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 1);
+
+	return 0;
+}
+
+static void beagle_disable_dvi(struct omap_dss_device *dssdev)
+{
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 0);
+}
+
+static struct omap_dss_device beagle_dvi_device = {
+	.type = OMAP_DISPLAY_TYPE_DPI,
+	.name = "dvi",
+	.driver_name = "generic_panel",
+	.phy.dpi.data_lines = 24,
+	.reset_gpio = 170,
+	.platform_enable = beagle_enable_dvi,
+	.platform_disable = beagle_disable_dvi,
+};
+
+static struct omap_dss_device beagle_tv_device = {
+	.name = "tv",
+	.driver_name = "venc",
+	.type = OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+static struct omap_dss_device *beagle_dss_devices[] = {
+	&beagle_dvi_device,
+	&beagle_tv_device,
+};
+
+static struct omap_dss_board_info beagle_dss_data = {
+	.num_devices = ARRAY_SIZE(beagle_dss_devices),
+	.devices = beagle_dss_devices,
+	.default_device = &beagle_dvi_device,
+};
+
+static struct platform_device beagle_dss_device = {
+	.name          = "omapdss",
+	.id            = -1,
+	.dev            = {
+		.platform_data = &beagle_dss_data,
+	},
+};
+
+static struct regulator_consumer_supply beagle_vdac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss");
+
+static struct regulator_consumer_supply beagle_vdvi_supply =
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
+
+static void __init beagle_display_init(void)
+{
+	int r;
+
+	r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
+	if (r < 0) {
+		printk(KERN_ERR "Unable to get DVI reset GPIO\n");
+		return;
+	}
+
+	gpio_direction_output(beagle_dvi_device.reset_gpio, 0);
+}
+
 #include "sdram-micron-mt46h32m32lf-6.h"
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -117,15 +189,6 @@
 	{}	/* Terminator */
 };
 
-static struct platform_device omap3_beagle_lcd_device = {
-	.name		= "omap3beagle_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
 static struct regulator_consumer_supply beagle_vmmc1_supply = {
 	.supply			= "vmmc",
 };
@@ -181,16 +244,6 @@
 	.setup		= beagle_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply beagle_vdac_supply = {
-	.supply		= "vdac",
-	.dev		= &omap3_beagle_lcd_device.dev,
-};
-
-static struct regulator_consumer_supply beagle_vdvi_supply = {
-	.supply		= "vdvi",
-	.dev		= &omap3_beagle_lcd_device.dev,
-};
-
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data beagle_vmmc1 = {
 	.constraints = {
@@ -349,14 +402,8 @@
 	},
 };
 
-static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
-};
-
 static void __init omap3_beagle_init_irq(void)
 {
-	omap_board_config = omap3_beagle_config;
-	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
@@ -367,9 +414,9 @@
 }
 
 static struct platform_device *omap3_beagle_devices[] __initdata = {
-	&omap3_beagle_lcd_device,
 	&leds_gpio,
 	&keys_gpio,
+	&beagle_dss_device,
 };
 
 static void __init omap3beagle_flash_init(void)
@@ -456,6 +503,8 @@
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+
+	beagle_display_init();
 }
 
 static void __init omap3_beagle_map_io(void)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-omap3evm.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-omap3evm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-omap3evm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-omap3evm.c	2010-08-01 18:11:14.000000000 -0400
@@ -579,9 +579,7 @@
 		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
 
 	gpio_direction_input(OMAP3_EVM_TS_GPIO);
-
-	omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
-	omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+	gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310);
 }
 
 static int ads7846_get_pendown_state(void)
@@ -600,6 +598,7 @@
 	.get_pendown_state	= ads7846_get_pendown_state,
 	.keep_vref_on		= 1,
 	.settle_delay_usecs	= 150,
+	.wakeup				= true,
 };
 
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
@@ -651,11 +650,10 @@
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP |
+				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW |
 				OMAP_PIN_OFF_WAKEUPENABLE),
 	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
-				OMAP_PIN_OFF_INPUT_PULLUP |
-				OMAP_PIN_OFF_WAKEUPENABLE),
+				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
@@ -702,6 +700,9 @@
 		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
 		ehci_pdata.reset_gpio_port[1] = 21;
 
+		/* EVM REV >= E can supply 500mA with EXTVBUS programming */
+		musb_board_data.power = 500;
+		musb_board_data.extvbus = 1;
 	} else {
 		/* setup EHCI phy reset on MDC */
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-omap3pandora.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-omap3pandora.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-omap3pandora.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-omap3pandora.c	2010-08-01 18:11:14.000000000 -0400
@@ -130,8 +130,8 @@
 static void __init pandora_keys_gpio_init(void)
 {
 	/* set debounce time for GPIO banks 4 and 6 */
-	omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
-	omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+	gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME);
+	gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME);
 }
 
 static int board_keymap[] = {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-omap3stalker.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-omap3stalker.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-omap3stalker.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-omap3stalker.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,670 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Guangzhou EMA-Tech
+ *
+ * Modified from mach-omap2/board-omap3evm.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
+#include <plat/display.h>
+
+#include <plat/mcspi.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c/at24.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mux.h"
+#include "hsmmc.h"
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#define OMAP3STALKER_ETHR_START	0x2c000000
+#define OMAP3STALKER_ETHR_SIZE	1024
+#define OMAP3STALKER_ETHR_GPIO_IRQ	19
+#define OMAP3STALKER_SMC911X_CS	5
+
+static struct resource omap3stalker_smsc911x_resources[] = {
+	[0] = {
+	       .start	= OMAP3STALKER_ETHR_START,
+	       .end	=
+	       (OMAP3STALKER_ETHR_START + OMAP3STALKER_ETHR_SIZE - 1),
+	       .flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+	       .start	= OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ),
+	       .end	= OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ),
+	       .flags	= (IORESOURCE_IRQ | IRQF_TRIGGER_LOW),
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS),
+};
+
+static struct platform_device omap3stalker_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap3stalker_smsc911x_resources),
+	.resource	= &omap3stalker_smsc911x_resources[0],
+	.dev		= {
+		.platform_data	= &smsc911x_config,
+	},
+};
+
+static inline void __init omap3stalker_init_eth(void)
+{
+	int eth_cs;
+	struct clk *l3ck;
+	unsigned int rate;
+
+	eth_cs = OMAP3STALKER_SMC911X_CS;
+
+	l3ck = clk_get(NULL, "l3_ck");
+	if (IS_ERR(l3ck))
+		rate = 100000000;
+	else
+		rate = clk_get_rate(l3ck);
+
+	omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP);
+	if (gpio_request(OMAP3STALKER_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+		printk(KERN_ERR
+		       "Failed to request GPIO%d for smc911x IRQ\n",
+		       OMAP3STALKER_ETHR_GPIO_IRQ);
+		return;
+	}
+
+	gpio_direction_input(OMAP3STALKER_ETHR_GPIO_IRQ);
+
+	platform_device_register(&omap3stalker_smsc911x_device);
+}
+
+#else
+static inline void __init omap3stalker_init_eth(void)
+{
+	return;
+}
+#endif
+
+/*
+ * OMAP3 DSS control signals
+ */
+
+#define DSS_ENABLE_GPIO	199
+#define LCD_PANEL_BKLIGHT_GPIO	210
+#define ENABLE_VPLL2_DEV_GRP	0xE0
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init omap3_stalker_display_init(void)
+{
+	return;
+}
+
+static int omap3_stalker_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+	gpio_set_value(DSS_ENABLE_GPIO, 1);
+	gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 1);
+	lcd_enabled = 1;
+	return 0;
+}
+
+static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(DSS_ENABLE_GPIO, 0);
+	gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 0);
+	lcd_enabled = 0;
+}
+
+static struct omap_dss_device omap3_stalker_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "generic_panel",
+	.phy.dpi.data_lines	= 24,
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.platform_enable	= omap3_stalker_enable_lcd,
+	.platform_disable	= omap3_stalker_disable_lcd,
+};
+
+static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device omap3_stalker_tv_device = {
+	.name			= "tv",
+	.driver_name		= "venc",
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
+	.u.venc.type		= OMAP_DSS_VENC_TYPE_COMPOSITE,
+#endif
+	.platform_enable	= omap3_stalker_enable_tv,
+	.platform_disable	= omap3_stalker_disable_tv,
+};
+
+static int omap3_stalker_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+	gpio_set_value(DSS_ENABLE_GPIO, 1);
+	dvi_enabled = 1;
+	return 0;
+}
+
+static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(DSS_ENABLE_GPIO, 0);
+	dvi_enabled = 0;
+}
+
+static struct omap_dss_device omap3_stalker_dvi_device = {
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= omap3_stalker_enable_dvi,
+	.platform_disable	= omap3_stalker_disable_dvi,
+};
+
+static struct omap_dss_device *omap3_stalker_dss_devices[] = {
+	&omap3_stalker_lcd_device,
+	&omap3_stalker_tv_device,
+	&omap3_stalker_dvi_device,
+};
+
+static struct omap_dss_board_info omap3_stalker_dss_data = {
+	.num_devices	= ARRAY_SIZE(omap3_stalker_dss_devices),
+	.devices	= omap3_stalker_dss_devices,
+	.default_device	= &omap3_stalker_dvi_device,
+};
+
+static struct platform_device omap3_stalker_dss_device = {
+	.name	= "omapdss",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &omap3_stalker_dss_data,
+	},
+};
+
+static struct regulator_consumer_supply omap3stalker_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+static struct regulator_consumer_supply omap3stalker_vsim_supply = {
+	.supply		= "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data omap3stalker_vmmc1 = {
+	.constraints		= {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+		| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+		| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3stalker_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data omap3stalker_vsim = {
+	.constraints		= {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+		| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+		| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3stalker_vsim_supply,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+	 .mmc		= 1,
+	 .wires		= 4,
+	 .gpio_cd	= -EINVAL,
+	 .gpio_wp	= 23,
+	 },
+	{}			/* Terminator */
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+	{
+	 .code		= BTN_EXTRA,
+	 .gpio		= 18,
+	 .desc		= "user",
+	 .wakeup	= 1,
+	 },
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &gpio_key_info,
+	},
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+	 .name			= "stalker:D8:usr0",
+	 .default_trigger	= "default-on",
+	 .gpio			= 126,
+	 },
+	{
+	 .name			= "stalker:D9:usr1",
+	 .default_trigger	= "default-on",
+	 .gpio			= 127,
+	 },
+	{
+	 .name			= "stalker:D3:mmc0",
+	 .gpio			= -EINVAL,	/* gets replaced */
+	 .active_low		= true,
+	 .default_trigger	= "mmc0",
+	 },
+	{
+	 .name			= "stalker:D4:heartbeat",
+	 .gpio			= -EINVAL,	/* gets replaced */
+	 .active_low		= true,
+	 .default_trigger	= "heartbeat",
+	 },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static int
+omap3stalker_twl_gpio_setup(struct device *dev,
+			    unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+	mmc[0].gpio_cd = gpio + 0;
+	omap2_hsmmc_init(mmc);
+
+	/* link regulators to MMC adapters */
+	omap3stalker_vmmc1_supply.dev = mmc[0].dev;
+	omap3stalker_vsim_supply.dev = mmc[0].dev;
+
+	/*
+	 * Most GPIOs are for USB OTG.  Some are mostly sent to
+	 * the P2 connector; notably LEDA for the LCD backlight.
+	 */
+
+	/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
+	gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
+	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+	/* gpio + 7 == DVI Enable */
+	gpio_request(gpio + 7, "EN_DVI");
+	gpio_direction_output(gpio + 7, 0);
+
+	/* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+	/* GPIO + 13 == ledsync (out, heartbeat) */
+	gpio_leds[3].gpio = gpio + 13;
+
+	platform_device_register(&leds_gpio);
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.setup		= omap3stalker_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3stalker_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int board_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(0, 1, KEY_DOWN),
+	KEY(0, 2, KEY_ENTER),
+	KEY(0, 3, KEY_M),
+
+	KEY(1, 0, KEY_RIGHT),
+	KEY(1, 1, KEY_UP),
+	KEY(1, 2, KEY_I),
+	KEY(1, 3, KEY_N),
+
+	KEY(2, 0, KEY_A),
+	KEY(2, 1, KEY_E),
+	KEY(2, 2, KEY_J),
+	KEY(2, 3, KEY_O),
+
+	KEY(3, 0, KEY_B),
+	KEY(3, 1, KEY_F),
+	KEY(3, 2, KEY_K),
+	KEY(3, 3, KEY_P)
+};
+
+static struct matrix_keymap_data board_map_data = {
+	.keymap		= board_keymap,
+	.keymap_size	= ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data omap3stalker_kp_data = {
+	.keymap_data	= &board_map_data,
+	.rows		= 4,
+	.cols		= 4,
+	.rep		= 1,
+};
+
+static struct twl4030_madc_platform_data omap3stalker_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct twl4030_codec_audio_data omap3stalker_audio_data = {
+	.audio_mclk	= 26000000,
+};
+
+static struct twl4030_codec_data omap3stalker_codec_data = {
+	.audio_mclk	= 26000000,
+	.audio		= &omap3stalker_audio_data,
+};
+
+static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = {
+	.supply		= "vdda_dac",
+	.dev		= &omap3_stalker_dss_device.dev,
+};
+
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data omap3_stalker_vdac = {
+	.constraints		= {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+		| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+		| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3_stalker_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply omap3_stalker_vpll2_supply = {
+	.supply		= "vdds_dsi",
+	.dev		= &omap3_stalker_lcd_device.dev,
+};
+
+static struct regulator_init_data omap3_stalker_vpll2 = {
+	.constraints		= {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV = true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+		| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+		| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3_stalker_vpll2_supply,
+};
+
+static struct twl4030_platform_data omap3stalker_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.keypad		= &omap3stalker_kp_data,
+	.madc		= &omap3stalker_madc_data,
+	.usb		= &omap3stalker_usb_data,
+	.gpio		= &omap3stalker_gpio_data,
+	.codec		= &omap3stalker_codec_data,
+	.vdac		= &omap3_stalker_vdac,
+	.vpll2		= &omap3_stalker_vpll2,
+};
+
+static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo[] = {
+	{
+	 I2C_BOARD_INFO("twl4030", 0x48),
+	 .flags		= I2C_CLIENT_WAKE,
+	 .irq		= INT_34XX_SYS_NIRQ,
+	 .platform_data	= &omap3stalker_twldata,
+	 },
+};
+
+static struct at24_platform_data fram_info = {
+	.byte_len	= (64 * 1024) / 8,
+	.page_size	= 8192,
+	.flags		= AT24_FLAG_ADDR16 | AT24_FLAG_IRUGO,
+};
+
+static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
+	{
+	 I2C_BOARD_INFO("24c64", 0x50),
+	 .flags		= I2C_CLIENT_WAKE,
+	 .platform_data	= &fram_info,
+	 },
+};
+
+static int __init omap3_stalker_i2c_init(void)
+{
+	/*
+	 * REVISIT: These entries can be set in omap3evm_twl_data
+	 * after a merge with MFD tree
+	 */
+	omap3stalker_twldata.vmmc1 = &omap3stalker_vmmc1;
+	omap3stalker_twldata.vsim = &omap3stalker_vsim;
+
+	omap_register_i2c_bus(1, 2600, omap3stalker_i2c_boardinfo,
+			      ARRAY_SIZE(omap3stalker_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
+			      ARRAY_SIZE(omap3stalker_i2c_boardinfo3));
+	return 0;
+}
+
+#define OMAP3_STALKER_TS_GPIO	175
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(OMAP3_STALKER_TS_GPIO, "ADS7846 pendown") < 0)
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+	gpio_direction_input(OMAP3_STALKER_TS_GPIO);
+	gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(OMAP3_STALKER_TS_GPIO);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+	.settle_delay_usecs	= 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode		= 0,
+	.single_channel		= 1,	/* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3stalker_spi_board_info[] = {
+	[0] = {
+	       .modalias	= "ads7846",
+	       .bus_num		= 1,
+	       .chip_select	= 0,
+	       .max_speed_hz	= 1500000,
+	       .controller_data	= &ads7846_mcspi_config,
+	       .irq		= OMAP_GPIO_IRQ(OMAP3_STALKER_TS_GPIO),
+	       .platform_data	= &ads7846_config,
+	},
+};
+
+static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
+};
+
+static void __init omap3_stalker_init_irq(void)
+{
+	omap_board_config = omap3_stalker_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
+	omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(12);
+#endif
+	omap_gpio_init();
+}
+
+static struct platform_device *omap3_stalker_devices[] __initdata = {
+	&omap3_stalker_dss_device,
+	&keys_gpio,
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset = true,
+	.reset_gpio_port[0] = -EINVAL,
+	.reset_gpio_port[1] = 21,
+	.reset_gpio_port[2] = -EINVAL,
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
+		  OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
+		  OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+	{.reg_offset = OMAP_MUX_TERMINATOR},
+};
+#else
+#define board_mux	NULL
+#endif
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type	= MUSB_INTERFACE_ULPI,
+	.mode		= MUSB_OTG,
+	.power		= 100,
+};
+
+static void __init omap3_stalker_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
+
+	omap3_stalker_i2c_init();
+
+	platform_add_devices(omap3_stalker_devices,
+			     ARRAY_SIZE(omap3_stalker_devices));
+
+	spi_register_board_info(omap3stalker_spi_board_info,
+				ARRAY_SIZE(omap3stalker_spi_board_info));
+
+	omap_serial_init();
+	usb_musb_init(&musb_board_data);
+	usb_ehci_init(&ehci_pdata);
+	ads7846_dev_init();
+
+	omap_mux_init_gpio(21, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP);
+
+	omap3stalker_init_eth();
+	omap3_stalker_display_init();
+/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
+}
+
+static void __init omap3_stalker_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap34xx_map_common_io();
+}
+
+MACHINE_START(SBC3530, "OMAP3 STALKER")
+	/* Maintainer: Jason Lam -lzg@ema-tech.com */
+	.phys_io		= 0x48000000,
+	.io_pg_offst		= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params		= 0x80000100,
+	.map_io			= omap3_stalker_map_io,
+	.init_irq		= omap3_stalker_init_irq,
+	.init_machine		= omap3_stalker_init,
+	.timer			= &omap_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-omap3touchbook.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-omap3touchbook.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-omap3touchbook.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-omap3touchbook.c	2010-08-01 18:11:14.000000000 -0400
@@ -328,8 +328,7 @@
 	}
 
 	gpio_direction_input(OMAP3_TS_GPIO);
-	omap_set_gpio_debounce(OMAP3_TS_GPIO, 1);
-	omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa);
+	gpio_set_debounce(OMAP3_TS_GPIO, 310);
 }
 
 static struct ads7846_platform_data ads7846_config = {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-overo.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-overo.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-overo.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-overo.c	2010-08-01 18:11:14.000000000 -0400
@@ -63,6 +63,8 @@
 
 #define OVERO_SMSC911X_CS      5
 #define OVERO_SMSC911X_GPIO    176
+#define OVERO_SMSC911X2_CS     4
+#define OVERO_SMSC911X2_GPIO   65
 
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
@@ -137,6 +139,16 @@
 	},
 };
 
+static struct resource overo_smsc911x2_resources[] = {
+	{
+		.name	= "smsc911x2-memory",
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
 static struct smsc911x_platform_config overo_smsc911x_config = {
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
@@ -146,7 +158,7 @@
 
 static struct platform_device overo_smsc911x_device = {
 	.name		= "smsc911x",
-	.id		= -1,
+	.id		= 0,
 	.num_resources	= ARRAY_SIZE(overo_smsc911x_resources),
 	.resource	= overo_smsc911x_resources,
 	.dev		= {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-rx51.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-rx51.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-rx51.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-rx51.c	2010-08-01 18:11:14.000000000 -0400
@@ -36,6 +36,7 @@
 #define RX51_GPIO_SLEEP_IND 162
 
 struct omap_sdrc_params *rx51_get_sdram_timings(void);
+extern void rx51_video_mem_init(void);
 
 static struct gpio_led gpio_leds[] = {
 	{
@@ -143,6 +144,7 @@
 static void __init rx51_map_io(void)
 {
 	omap2_set_globals_343x();
+	rx51_video_mem_init();
 	omap34xx_map_common_io();
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-rx51-peripherals.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-rx51-peripherals.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-rx51-peripherals.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-rx51-peripherals.c	2010-08-01 18:11:14.000000000 -0400
@@ -45,6 +45,8 @@
 /* list all spi devices here */
 enum {
 	RX51_SPI_WL1251,
+	RX51_SPI_MIPID,		/* LCD panel */
+	RX51_SPI_TSC2005,	/* Touch Controller */
 };
 
 static struct wl12xx_platform_data wl1251_pdata;
@@ -54,6 +56,16 @@
 	.single_channel	= 1,
 };
 
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
 static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 	[RX51_SPI_WL1251] = {
 		.modalias		= "wl1251",
@@ -64,6 +76,22 @@
 		.controller_data	= &wl1251_mcspi_config,
 		.platform_data		= &wl1251_pdata,
 	},
+	[RX51_SPI_MIPID] = {
+		.modalias		= "acx565akm",
+		.bus_num		= 1,
+		.chip_select		= 2,
+		.max_speed_hz		= 6000000,
+		.controller_data	= &mipid_mcspi_config,
+	},
+	[RX51_SPI_TSC2005] = {
+		.modalias		= "tsc2005",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		/* .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),*/
+		.max_speed_hz		= 6000000,
+		.controller_data	= &tsc2005_mcspi_config,
+		/* .platform_data = &tsc2005_config,*/
+	},
 };
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -147,6 +175,10 @@
 #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
 
 static int board_keymap[] = {
+	/*
+	 * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
+	 * connected to the ground" matrix state.
+	 */
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_O),
 	KEY(0, 2, KEY_P),
@@ -154,6 +186,7 @@
 	KEY(0, 4, KEY_BACKSPACE),
 	KEY(0, 6, KEY_A),
 	KEY(0, 7, KEY_S),
+
 	KEY(1, 0, KEY_W),
 	KEY(1, 1, KEY_D),
 	KEY(1, 2, KEY_F),
@@ -162,6 +195,7 @@
 	KEY(1, 5, KEY_J),
 	KEY(1, 6, KEY_K),
 	KEY(1, 7, KEY_L),
+
 	KEY(2, 0, KEY_E),
 	KEY(2, 1, KEY_DOT),
 	KEY(2, 2, KEY_UP),
@@ -169,6 +203,8 @@
 	KEY(2, 5, KEY_Z),
 	KEY(2, 6, KEY_X),
 	KEY(2, 7, KEY_C),
+	KEY(2, 8, KEY_F9),
+
 	KEY(3, 0, KEY_R),
 	KEY(3, 1, KEY_V),
 	KEY(3, 2, KEY_B),
@@ -177,20 +213,23 @@
 	KEY(3, 5, KEY_SPACE),
 	KEY(3, 6, KEY_SPACE),
 	KEY(3, 7, KEY_LEFT),
+
 	KEY(4, 0, KEY_T),
 	KEY(4, 1, KEY_DOWN),
 	KEY(4, 2, KEY_RIGHT),
 	KEY(4, 4, KEY_LEFTCTRL),
 	KEY(4, 5, KEY_RIGHTALT),
 	KEY(4, 6, KEY_LEFTSHIFT),
+	KEY(4, 8, KEY_F10),
+
 	KEY(5, 0, KEY_Y),
+	KEY(5, 8, KEY_F11),
+
 	KEY(6, 0, KEY_U),
+
 	KEY(7, 0, KEY_I),
 	KEY(7, 1, KEY_F7),
 	KEY(7, 2, KEY_F8),
-	KEY(0xff, 2, KEY_F9),
-	KEY(0xff, 4, KEY_F10),
-	KEY(0xff, 5, KEY_F11),
 };
 
 static struct matrix_keymap_data board_map_data = {
@@ -277,7 +316,7 @@
 	.dev_name = "mmci-omap-hs.0",
 };
 
-static struct regulator_consumer_supply rx51_vmmc2_supply = {
+static struct regulator_consumer_supply rx51_vaux3_supply = {
 	.supply   = "vmmc",
 	.dev_name = "mmci-omap-hs.1",
 };
@@ -287,6 +326,48 @@
 	.dev_name = "mmci-omap-hs.1",
 };
 
+static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
+	/* tlv320aic3x analog supplies */
+	{
+		.supply		= "AVDD",
+		.dev_name	= "2-0018",
+	},
+	{
+		.supply		= "DRVDD",
+		.dev_name	= "2-0018",
+	},
+	/* Keep vmmc as last item. It is not iterated for newer boards */
+	{
+		.supply		= "vmmc",
+		.dev_name	= "mmci-omap-hs.1",
+	},
+};
+
+static struct regulator_consumer_supply rx51_vio_supplies[] = {
+	/* tlv320aic3x digital supplies */
+	{
+		.supply		= "IOVDD",
+		.dev_name	= "2-0018"
+	},
+	{
+		.supply		= "DVDD",
+		.dev_name	= "2-0018"
+	},
+};
+
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+extern struct platform_device rx51_display_device;
+#endif
+
+static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+	{
+		.supply	= "vdds_sdi",
+		.dev	= &rx51_display_device.dev,
+	},
+#endif
+};
+
 static struct regulator_init_data rx51_vaux1 = {
 	.constraints = {
 		.name			= "V28",
@@ -297,6 +378,8 @@
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vaux1_consumers),
+	.consumer_supplies	= rx51_vaux1_consumers,
 };
 
 static struct regulator_init_data rx51_vaux2 = {
@@ -338,7 +421,7 @@
 					| REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vmmc2_supply,
+	.consumer_supplies	= &rx51_vaux3_supply,
 };
 
 static struct regulator_init_data rx51_vaux4 = {
@@ -370,9 +453,9 @@
 
 static struct regulator_init_data rx51_vmmc2 = {
 	.constraints = {
-		.name			= "VMMC2_30",
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
+		.name			= "V28_A",
+		.min_uV			= 2800000,
+		.max_uV			= 3000000,
 		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
@@ -380,8 +463,8 @@
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vmmc2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc2_supplies),
+	.consumer_supplies	= rx51_vmmc2_supplies,
 };
 
 static struct regulator_init_data rx51_vsim = {
@@ -411,6 +494,20 @@
 	},
 };
 
+static struct regulator_init_data rx51_vio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vio_supplies),
+	.consumer_supplies	= rx51_vio_supplies,
+};
+
 static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 {
 	/* FIXME this gpio setup is just a placeholder for now */
@@ -618,6 +715,7 @@
 	.vmmc1			= &rx51_vmmc1,
 	.vsim			= &rx51_vsim,
 	.vdac			= &rx51_vdac,
+	.vio			= &rx51_vio,
 };
 
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
@@ -629,18 +727,27 @@
 	},
 };
 
+static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	},
+};
+
 static int __init rx51_i2c_init(void)
 {
 	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
-	    system_rev >= SYSTEM_REV_B_USES_VAUX3)
+	    system_rev >= SYSTEM_REV_B_USES_VAUX3) {
 		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
-	else {
+		/* Only older boards use VMMC2 for internal MMC */
+		rx51_vmmc2.num_consumer_supplies--;
+	} else {
 		rx51_twldata.vaux3 = &rx51_vaux3_cam;
-		rx51_twldata.vmmc2 = &rx51_vmmc2;
 	}
+	rx51_twldata.vmmc2 = &rx51_vmmc2;
 	omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
-			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
-	omap_register_i2c_bus(2, 100, NULL, 0);
+			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
+	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
+			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
 	omap_register_i2c_bus(3, 400, NULL, 0);
 	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-rx51-video.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-rx51-video.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-rx51-video.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-rx51-video.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,109 @@
+/*
+ * linux/arch/arm/mach-omap2/board-rx51-video.c
+ *
+ * Copyright (C) 2010 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/mm.h>
+
+#include <asm/mach-types.h>
+#include <plat/mux.h>
+#include <plat/display.h>
+#include <plat/vram.h>
+#include <plat/mcspi.h>
+
+#include "mux.h"
+
+#define RX51_LCD_RESET_GPIO	90
+
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+
+static int rx51_lcd_enable(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 1);
+	return 0;
+}
+
+static void rx51_lcd_disable(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(dssdev->reset_gpio, 0);
+}
+
+static struct omap_dss_device rx51_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "panel-acx565akm",
+	.type			= OMAP_DISPLAY_TYPE_SDI,
+	.phy.sdi.datapairs	= 2,
+	.reset_gpio		= RX51_LCD_RESET_GPIO,
+	.platform_enable	= rx51_lcd_enable,
+	.platform_disable	= rx51_lcd_disable,
+};
+
+static struct omap_dss_device *rx51_dss_devices[] = {
+	&rx51_lcd_device,
+};
+
+static struct omap_dss_board_info rx51_dss_board_info = {
+	.num_devices	= ARRAY_SIZE(rx51_dss_devices),
+	.devices	= rx51_dss_devices,
+	.default_device	= &rx51_lcd_device,
+};
+
+struct platform_device rx51_display_device = {
+	.name	= "omapdss",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rx51_dss_board_info,
+	},
+};
+
+static struct platform_device *rx51_video_devices[] __initdata = {
+	&rx51_display_device,
+};
+
+static int __init rx51_video_init(void)
+{
+	if (!machine_is_nokia_rx51())
+		return 0;
+
+	if (omap_mux_init_gpio(RX51_LCD_RESET_GPIO, OMAP_PIN_OUTPUT)) {
+		pr_err("%s cannot configure MUX for LCD RESET\n", __func__);
+		return 0;
+	}
+
+	if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) {
+		pr_err("%s failed to get LCD Reset GPIO\n", __func__);
+		return 0;
+	}
+
+	gpio_direction_output(RX51_LCD_RESET_GPIO, 1);
+
+	platform_add_devices(rx51_video_devices,
+				ARRAY_SIZE(rx51_video_devices));
+	return 0;
+}
+
+subsys_initcall(rx51_video_init);
+
+void __init rx51_video_mem_init(void)
+{
+	/*
+	 * GFX 864x480x32bpp
+	 * VID1/2 1280x720x32bpp double buffered
+	 */
+	omap_vram_set_sdram_vram(PAGE_ALIGN(864 * 480 * 4) +
+			2 * PAGE_ALIGN(1280 * 720 * 4 * 2), 0);
+}
+
+#else
+void __init rx51_video_mem_init(void) { }
+#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-zoom2.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-zoom2.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-zoom2.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-zoom2.c	2010-08-01 18:11:14.000000000 -0400
@@ -91,8 +91,8 @@
 }
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.phys_io	= ZOOM_UART_BASE,
+	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_zoom2_map_io,
 	.init_irq	= omap_zoom2_init_irq,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-zoom3.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-zoom3.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-zoom3.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-zoom3.c	2010-08-01 18:11:14.000000000 -0400
@@ -73,8 +73,8 @@
 }
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
-	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.phys_io	= ZOOM_UART_BASE,
+	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_zoom_map_io,
 	.init_irq	= omap_zoom_init_irq,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-zoom-debugboard.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-zoom-debugboard.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/board-zoom-debugboard.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/board-zoom-debugboard.c	2010-08-01 18:11:14.000000000 -0400
@@ -82,7 +82,7 @@
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.mapbase	= 0x10000000,
+		.mapbase	= ZOOM_UART_BASE,
 		.irq		= OMAP_GPIO_IRQ(102),
 		.flags		= UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
 		.irqflags	= IRQF_SHARED | IRQF_TRIGGER_RISING,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clkt2xxx_apll.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clkt2xxx_apll.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clkt2xxx_apll.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clkt2xxx_apll.c	2010-08-01 18:11:14.000000000 -0400
@@ -70,12 +70,12 @@
 
 static int omap2_clk_apll96_enable(struct clk *clk)
 {
-	return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL);
+	return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL_MASK);
 }
 
 static int omap2_clk_apll54_enable(struct clk *clk)
 {
-	return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL);
+	return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK);
 }
 
 /* Stop APLL */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c	2010-08-01 18:11:14.000000000 -0400
@@ -68,16 +68,13 @@
 {
 	const struct prcm_config *ptr;
 	long highest_rate;
-	long sys_ck_rate;
-
-	sys_ck_rate = clk_get_rate(sclk);
 
 	highest_rate = -EINVAL;
 
 	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
 		if (!(ptr->flags & cpu_mask))
 			continue;
-		if (ptr->xtal_speed != sys_ck_rate)
+		if (ptr->xtal_speed != sclk->rate)
 			continue;
 
 		highest_rate = ptr->mpu_speed;
@@ -96,15 +93,12 @@
 	const struct prcm_config *prcm;
 	unsigned long found_speed = 0;
 	unsigned long flags;
-	long sys_ck_rate;
-
-	sys_ck_rate = clk_get_rate(sclk);
 
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
 
-		if (prcm->xtal_speed != sys_ck_rate)
+		if (prcm->xtal_speed != sclk->rate)
 			continue;
 
 		if (prcm->mpu_speed <= rate) {
@@ -181,19 +175,16 @@
 void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
 {
 	const struct prcm_config *prcm;
-	long sys_ck_rate;
 	int i = 0;
 	int tbl_sz = 0;
 
 	if (!cpu_is_omap24xx())
 		return;
 
-	sys_ck_rate = clk_get_rate(sclk);
-
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
-		if (prcm->xtal_speed != sys_ck_rate)
+		if (prcm->xtal_speed != sclk->rate)
 			continue;
 
 		/* don't put bypass rates in table */
@@ -226,7 +217,7 @@
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
-		if (prcm->xtal_speed != sys_ck_rate)
+		if (prcm->xtal_speed != sclk->rate)
 			continue;
 
 		/* don't put bypass rates in table */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clkt_clksel.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clkt_clksel.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clkt_clksel.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clkt_clksel.c	2010-08-01 18:11:14.000000000 -0400
@@ -12,8 +12,26 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * XXX At some point these clksel clocks should be split into
- * "divider" clocks and "mux" clocks to better match the hardware.
+ *
+ * clksel clocks are clocks that do not have a fixed parent, or that
+ * can divide their parent's rate, or possibly both at the same time, based
+ * on the contents of a hardware register bitfield.
+ *
+ * All of the various mux and divider settings can be encoded into
+ * struct clksel* data structures, and then these can be autogenerated
+ * from some hardware database for each new chip generation.  This
+ * should avoid the need to write, review, and validate a lot of new
+ * clock code for each new chip, since it can be exported from the SoC
+ * design flow.  This is now done on OMAP4.
+ *
+ * The fusion of mux and divider clocks is a software creation.  In
+ * hardware reality, the multiplexer (parent selection) and the
+ * divider exist separately.  XXX At some point these clksel clocks
+ * should be split into "divider" clocks and "mux" clocks to better
+ * match the hardware.
+ *
+ * (The name "clksel" comes from the name of the corresponding
+ * register field in the OMAP2/3 family of SoCs.)
  *
  * XXX Currently these clocks are only used in the OMAP2/3/4 code, but
  * many of the OMAP1 clocks should be convertible to use this
@@ -29,14 +47,11 @@
 #include <plat/clock.h>
 
 #include "clock.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
 
 /* Private functions */
 
 /**
- * _omap2_get_clksel_by_parent - return clksel struct for a given clk & parent
+ * _get_clksel_by_parent() - return clksel struct for a given clk & parent
  * @clk: OMAP struct clk ptr to inspect
  * @src_clk: OMAP struct clk ptr of the parent clk to search for
  *
@@ -44,141 +59,217 @@
  * the element associated with the supplied parent clock address.
  * Returns a pointer to the struct clksel on success or NULL on error.
  */
-static const struct clksel *_omap2_get_clksel_by_parent(struct clk *clk,
-							struct clk *src_clk)
+static const struct clksel *_get_clksel_by_parent(struct clk *clk,
+						  struct clk *src_clk)
 {
 	const struct clksel *clks;
 
-	if (!clk->clksel)
-		return NULL;
-
-	for (clks = clk->clksel; clks->parent; clks++) {
+	for (clks = clk->clksel; clks->parent; clks++)
 		if (clks->parent == src_clk)
 			break; /* Found the requested parent */
-	}
 
 	if (!clks->parent) {
-		printk(KERN_ERR "clock: Could not find parent clock %s in "
-		       "clksel array of clock %s\n", src_clk->name,
-		       clk->name);
+		/* This indicates a data problem */
+		WARN(1, "clock: Could not find parent clock %s in clksel array "
+		     "of clock %s\n", src_clk->name, clk->name);
 		return NULL;
 	}
 
 	return clks;
 }
 
-/*
- * Converts encoded control register address into a full address
- * On error, the return value (parent_div) will be 0.
+/**
+ * _get_div_and_fieldval() - find the new clksel divisor and field value to use
+ * @src_clk: planned new parent struct clk *
+ * @clk: struct clk * that is being reparented
+ * @field_val: pointer to a u32 to contain the register data for the divisor
+ *
+ * Given an intended new parent struct clk * @src_clk, and the struct
+ * clk * @clk to the clock that is being reparented, find the
+ * appropriate rate divisor for the new clock (returned as the return
+ * value), and the corresponding register bitfield data to program to
+ * reach that divisor (returned in the u32 pointed to by @field_val).
+ * Returns 0 on error, or returns the newly-selected divisor upon
+ * success (in this latter case, the corresponding register bitfield
+ * value is passed back in the variable pointed to by @field_val)
  */
-static u32 _omap2_clksel_get_src_field(struct clk *src_clk, struct clk *clk,
-				       u32 *field_val)
+static u8 _get_div_and_fieldval(struct clk *src_clk, struct clk *clk,
+				u32 *field_val)
 {
 	const struct clksel *clks;
-	const struct clksel_rate *clkr;
+	const struct clksel_rate *clkr, *max_clkr;
+	u8 max_div = 0;
 
-	clks = _omap2_get_clksel_by_parent(clk, src_clk);
+	clks = _get_clksel_by_parent(clk, src_clk);
 	if (!clks)
 		return 0;
 
+	/*
+	 * Find the highest divisor (e.g., the one resulting in the
+	 * lowest rate) to use as the default.  This should avoid
+	 * clock rates that are too high for the device.  XXX A better
+	 * solution here would be to try to determine if there is a
+	 * divisor matching the original clock rate before the parent
+	 * switch, and if it cannot be found, to fall back to the
+	 * highest divisor.
+	 */
 	for (clkr = clks->rates; clkr->div; clkr++) {
-		if (clkr->flags & cpu_mask && clkr->flags & DEFAULT_RATE)
-			break; /* Found the default rate for this platform */
+		if (!(clkr->flags & cpu_mask))
+			continue;
+
+		if (clkr->div > max_div) {
+			max_div = clkr->div;
+			max_clkr = clkr;
+		}
 	}
 
-	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find default rate for "
-		       "clock %s parent %s\n", clk->name,
-		       src_clk->parent->name);
+	if (max_div == 0) {
+		/* This indicates an error in the clksel data */
+		WARN(1, "clock: Could not find divisor for clock %s parent %s"
+		     "\n", clk->name, src_clk->parent->name);
 		return 0;
 	}
 
-	/* Should never happen.  Add a clksel mask to the struct clk. */
-	WARN_ON(clk->clksel_mask == 0);
-
-	*field_val = clkr->val;
+	*field_val = max_clkr->val;
 
-	return clkr->div;
+	return max_div;
 }
 
+/**
+ * _write_clksel_reg() - program a clock's clksel register in hardware
+ * @clk: struct clk * to program
+ * @v: clksel bitfield value to program (with LSB at bit 0)
+ *
+ * Shift the clksel register bitfield value @v to its appropriate
+ * location in the clksel register and write it in.  This function
+ * will ensure that the write to the clksel_reg reaches its
+ * destination before returning -- important since PRM and CM register
+ * accesses can be quite slow compared to ARM cycles -- but does not
+ * take into account any time the hardware might take to switch the
+ * clock source.
+ */
+static void _write_clksel_reg(struct clk *clk, u32 field_val)
+{
+	u32 v;
+
+	v = __raw_readl(clk->clksel_reg);
+	v &= ~clk->clksel_mask;
+	v |= field_val << __ffs(clk->clksel_mask);
+	__raw_writel(v, clk->clksel_reg);
 
-/* Public functions */
+	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+}
 
 /**
- * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
- * @clk: OMAP clock struct ptr to use
+ * _clksel_to_divisor() - turn clksel field value into integer divider
+ * @clk: OMAP struct clk to use
+ * @field_val: register field value to find
  *
- * Given a pointer to a source-selectable struct clk, read the hardware
- * register and determine what its parent is currently set to.  Update the
- * clk->parent field with the appropriate clk ptr.
+ * Given a struct clk of a rate-selectable clksel clock, and a register field
+ * value to search for, find the corresponding clock divisor.  The register
+ * field value should be pre-masked and shifted down so the LSB is at bit 0
+ * before calling.  Returns 0 on error or returns the actual integer divisor
+ * upon success.
  */
-void omap2_init_clksel_parent(struct clk *clk)
+static u32 _clksel_to_divisor(struct clk *clk, u32 field_val)
 {
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
-	u32 r, found = 0;
 
-	if (!clk->clksel)
-		return;
+	clks = _get_clksel_by_parent(clk, clk->parent);
+	if (!clks)
+		return 0;
 
-	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
-	r >>= __ffs(clk->clksel_mask);
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (!(clkr->flags & cpu_mask))
+			continue;
 
-	for (clks = clk->clksel; clks->parent && !found; clks++) {
-		for (clkr = clks->rates; clkr->div && !found; clkr++) {
-			if ((clkr->flags & cpu_mask) && (clkr->val == r)) {
-				if (clk->parent != clks->parent) {
-					pr_debug("clock: inited %s parent "
-						 "to %s (was %s)\n",
-						 clk->name, clks->parent->name,
-						 ((clk->parent) ?
-						  clk->parent->name : "NULL"));
-					clk_reparent(clk, clks->parent);
-				};
-				found = 1;
-			}
-		}
+		if (clkr->val == field_val)
+			break;
 	}
 
-	if (!found)
-		printk(KERN_ERR "clock: init parent: could not find "
-		       "regval %0x for clock %s\n", r,  clk->name);
+	if (!clkr->div) {
+		/* This indicates a data error */
+		WARN(1, "clock: Could not find fieldval %d for clock %s parent "
+		     "%s\n", field_val, clk->name, clk->parent->name);
+		return 0;
+	}
 
-	return;
+	return clkr->div;
 }
 
-/*
- * Used for clocks that are part of CLKSEL_xyz governed clocks.
- * REVISIT: Maybe change to use clk->enable() functions like on omap1?
+/**
+ * _divisor_to_clksel() - turn clksel integer divisor into a field value
+ * @clk: OMAP struct clk to use
+ * @div: integer divisor to search for
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a clock
+ * divisor, find the corresponding register field value.  Returns the
+ * register field value _before_ left-shifting (i.e., LSB is at bit
+ * 0); or returns 0xFFFFFFFF (~0) upon error.
  */
-unsigned long omap2_clksel_recalc(struct clk *clk)
+static u32 _divisor_to_clksel(struct clk *clk, u32 div)
 {
-	unsigned long rate;
-	u32 div = 0;
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
 
-	pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
+	/* should never happen */
+	WARN_ON(div == 0);
 
-	div = omap2_clksel_get_divisor(clk);
-	if (div == 0)
-		return clk->rate;
+	clks = _get_clksel_by_parent(clk, clk->parent);
+	if (!clks)
+		return ~0;
 
-	rate = clk->parent->rate / div;
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (!(clkr->flags & cpu_mask))
+			continue;
 
-	pr_debug("clock: new clock rate is %ld (div %d)\n", rate, div);
+		if (clkr->div == div)
+			break;
+	}
 
-	return rate;
+	if (!clkr->div) {
+		pr_err("clock: Could not find divisor %d for clock %s parent "
+		       "%s\n", div, clk->name, clk->parent->name);
+		return ~0;
+	}
+
+	return clkr->val;
 }
 
 /**
- * omap2_clksel_round_rate_div - find divisor for the given clock and rate
+ * _read_divisor() - get current divisor applied to parent clock (from hdwr)
+ * @clk: OMAP struct clk to use.
+ *
+ * Read the current divisor register value for @clk that is programmed
+ * into the hardware, convert it into the actual divisor value, and
+ * return it; or return 0 on error.
+ */
+static u32 _read_divisor(struct clk *clk)
+{
+	u32 v;
+
+	if (!clk->clksel || !clk->clksel_mask)
+		return 0;
+
+	v = __raw_readl(clk->clksel_reg);
+	v &= clk->clksel_mask;
+	v >>= __ffs(clk->clksel_mask);
+
+	return _clksel_to_divisor(clk, v);
+}
+
+/* Public functions */
+
+/**
+ * omap2_clksel_round_rate_div() - find divisor for the given clock and rate
  * @clk: OMAP struct clk to use
  * @target_rate: desired clock rate
  * @new_div: ptr to where we should store the divisor
  *
  * Finds 'best' divider value in an array based on the source and target
  * rates.  The divider array must be sorted with smallest divider first.
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
+ * This function is also used by the DPLL3 M2 divider code.
  *
  * Returns the rounded clock rate or returns 0xffffffff on error.
  */
@@ -190,12 +281,15 @@
 	const struct clksel_rate *clkr;
 	u32 last_div = 0;
 
+	if (!clk->clksel || !clk->clksel_mask)
+		return ~0;
+
 	pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
 		 clk->name, target_rate);
 
 	*new_div = 1;
 
-	clks = _omap2_get_clksel_by_parent(clk, clk->parent);
+	clks = _get_clksel_by_parent(clk, clk->parent);
 	if (!clks)
 		return ~0;
 
@@ -231,168 +325,174 @@
 	return clk->parent->rate / clkr->div;
 }
 
-/**
- * omap2_clksel_round_rate - find rounded rate for the given clock and rate
- * @clk: OMAP struct clk to use
- * @target_rate: desired clock rate
- *
- * Compatibility wrapper for OMAP clock framework
- * Finds best target rate based on the source clock and possible dividers.
- * rates. The divider array must be sorted with smallest divider first.
- * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
- * they are only settable as part of virtual_prcm set.
- *
- * Returns the rounded clock rate or returns 0xffffffff on error.
+/*
+ * Clocktype interface functions to the OMAP clock code
+ * (i.e., those used in struct clk field function pointers, etc.)
  */
-long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
-{
-	u32 new_div;
-
-	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
-}
-
-
-/* Given a clock and a rate apply a clock specific rounding function */
-long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk->round_rate)
-		return clk->round_rate(clk, rate);
-
-	return clk->rate;
-}
 
 /**
- * omap2_clksel_to_divisor() - turn clksel field value into integer divider
- * @clk: OMAP struct clk to use
- * @field_val: register field value to find
+ * omap2_init_clksel_parent() - set a clksel clk's parent field from the hdwr
+ * @clk: OMAP clock struct ptr to use
  *
- * Given a struct clk of a rate-selectable clksel clock, and a register field
- * value to search for, find the corresponding clock divisor.  The register
- * field value should be pre-masked and shifted down so the LSB is at bit 0
- * before calling.  Returns 0 on error
+ * Given a pointer @clk to a source-selectable struct clk, read the
+ * hardware register and determine what its parent is currently set
+ * to.  Update @clk's .parent field with the appropriate clk ptr.  No
+ * return value.
  */
-u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
+void omap2_init_clksel_parent(struct clk *clk)
 {
 	const struct clksel *clks;
 	const struct clksel_rate *clkr;
+	u32 r, found = 0;
 
-	clks = _omap2_get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return 0;
+	if (!clk->clksel || !clk->clksel_mask)
+		return;
 
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if ((clkr->flags & cpu_mask) && (clkr->val == field_val))
-			break;
-	}
+	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	r >>= __ffs(clk->clksel_mask);
 
-	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find fieldval %d for "
-		       "clock %s parent %s\n", field_val, clk->name,
-		       clk->parent->name);
-		return 0;
+	for (clks = clk->clksel; clks->parent && !found; clks++) {
+		for (clkr = clks->rates; clkr->div && !found; clkr++) {
+			if (!(clkr->flags & cpu_mask))
+				continue;
+
+			if (clkr->val == r) {
+				if (clk->parent != clks->parent) {
+					pr_debug("clock: inited %s parent "
+						 "to %s (was %s)\n",
+						 clk->name, clks->parent->name,
+						 ((clk->parent) ?
+						  clk->parent->name : "NULL"));
+					clk_reparent(clk, clks->parent);
+				};
+				found = 1;
+			}
+		}
 	}
 
-	return clkr->div;
+	/* This indicates a data error */
+	WARN(!found, "clock: %s: init parent: could not find regval %0x\n",
+	     clk->name, r);
+
+	return;
 }
 
 /**
- * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value
- * @clk: OMAP struct clk to use
- * @div: integer divisor to search for
+ * omap2_clksel_recalc() - function ptr to pass via struct clk .recalc field
+ * @clk: struct clk *
  *
- * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
- * find the corresponding register field value.  The return register value is
- * the value before left-shifting.  Returns ~0 on error
+ * This function is intended to be called only by the clock framework.
+ * Each clksel clock should have its struct clk .recalc field set to this
+ * function.  Returns the clock's current rate, based on its parent's rate
+ * and its current divisor setting in the hardware.
  */
-u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
+unsigned long omap2_clksel_recalc(struct clk *clk)
 {
-	const struct clksel *clks;
-	const struct clksel_rate *clkr;
-
-	/* should never happen */
-	WARN_ON(div == 0);
+	unsigned long rate;
+	u32 div = 0;
 
-	clks = _omap2_get_clksel_by_parent(clk, clk->parent);
-	if (!clks)
-		return ~0;
+	div = _read_divisor(clk);
+	if (div == 0)
+		return clk->rate;
 
-	for (clkr = clks->rates; clkr->div; clkr++) {
-		if ((clkr->flags & cpu_mask) && (clkr->div == div))
-			break;
-	}
+	rate = clk->parent->rate / div;
 
-	if (!clkr->div) {
-		printk(KERN_ERR "clock: Could not find divisor %d for "
-		       "clock %s parent %s\n", div, clk->name,
-		       clk->parent->name);
-		return ~0;
-	}
+	pr_debug("clock: %s: recalc'd rate is %ld (div %d)\n", clk->name,
+		 rate, div);
 
-	return clkr->val;
+	return rate;
 }
 
 /**
- * omap2_clksel_get_divisor - get current divider applied to parent clock.
- * @clk: OMAP struct clk to use.
+ * omap2_clksel_round_rate() - find rounded rate for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
  *
- * Returns the integer divisor upon success or 0 on error.
+ * This function is intended to be called only by the clock framework.
+ * Finds best target rate based on the source clock and possible dividers.
+ * rates. The divider array must be sorted with smallest divider first.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
  */
-u32 omap2_clksel_get_divisor(struct clk *clk)
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
 {
-	u32 v;
-
-	if (!clk->clksel_mask)
-		return 0;
-
-	v = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
-	v >>= __ffs(clk->clksel_mask);
+	u32 new_div;
 
-	return omap2_clksel_to_divisor(clk, v);
+	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
 }
 
+/**
+ * omap2_clksel_set_rate() - program clock rate in hardware
+ * @clk: struct clk * to program rate
+ * @rate: target rate to program
+ *
+ * This function is intended to be called only by the clock framework.
+ * Program @clk's rate to @rate in the hardware.  The clock can be
+ * either enabled or disabled when this happens, although if the clock
+ * is enabled, some downstream devices may glitch or behave
+ * unpredictably when the clock rate is changed - this depends on the
+ * hardware. This function does not currently check the usecount of
+ * the clock, so if multiple drivers are using the clock, and the rate
+ * is changed, they will all be affected without any notification.
+ * Returns -EINVAL upon error, or 0 upon success.
+ */
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 {
-	u32 v, field_val, validrate, new_div = 0;
+	u32 field_val, validrate, new_div = 0;
 
-	if (!clk->clksel_mask)
+	if (!clk->clksel || !clk->clksel_mask)
 		return -EINVAL;
 
 	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
 	if (validrate != rate)
 		return -EINVAL;
 
-	field_val = omap2_divisor_to_clksel(clk, new_div);
+	field_val = _divisor_to_clksel(clk, new_div);
 	if (field_val == ~0)
 		return -EINVAL;
 
-	v = __raw_readl(clk->clksel_reg);
-	v &= ~clk->clksel_mask;
-	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
-	v = __raw_readl(clk->clksel_reg); /* OCP barrier */
+	_write_clksel_reg(clk, field_val);
 
 	clk->rate = clk->parent->rate / new_div;
 
+	pr_debug("clock: %s: set rate to %ld\n", clk->name, clk->rate);
+
 	return 0;
 }
 
+/*
+ * Clksel parent setting function - not passed in struct clk function
+ * pointer - instead, the OMAP clock code currently assumes that any
+ * parent-setting clock is a clksel clock, and calls
+ * omap2_clksel_set_parent() by default
+ */
+
+/**
+ * omap2_clksel_set_parent() - change a clock's parent clock
+ * @clk: struct clk * of the child clock
+ * @new_parent: struct clk * of the new parent clock
+ *
+ * This function is intended to be called only by the clock framework.
+ * Change the parent clock of clock @clk to @new_parent.  This is
+ * intended to be used while @clk is disabled.  This function does not
+ * currently check the usecount of the clock, so if multiple drivers
+ * are using the clock, and the parent is changed, they will all be
+ * affected without any notification.  Returns -EINVAL upon error, or
+ * 0 upon success.
+ */
 int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent)
 {
-	u32 field_val, v, parent_div;
+	u32 field_val = 0;
+	u32 parent_div;
 
-	if (!clk->clksel)
+	if (!clk->clksel || !clk->clksel_mask)
 		return -EINVAL;
 
-	parent_div = _omap2_clksel_get_src_field(new_parent, clk, &field_val);
+	parent_div = _get_div_and_fieldval(new_parent, clk, &field_val);
 	if (!parent_div)
 		return -EINVAL;
 
-	/* Set new source value (previous dividers if any in effect) */
-	v = __raw_readl(clk->clksel_reg);
-	v &= ~clk->clksel_mask;
-	v |= field_val << __ffs(clk->clksel_mask);
-	__raw_writel(v, clk->clksel_reg);
-	v = __raw_readl(clk->clksel_reg);    /* OCP barrier */
+	_write_clksel_reg(clk, field_val);
 
 	clk_reparent(clk, new_parent);
 
@@ -402,7 +502,7 @@
 	if (parent_div > 0)
 		clk->rate /= parent_div;
 
-	pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
+	pr_debug("clock: %s: set parent to %s (new rate %ld)\n",
 		 clk->name, clk->parent->name, clk->rate);
 
 	return 0;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock2420_data.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock2420_data.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock2420_data.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock2420_data.c	2010-08-01 18:11:14.000000000 -0400
@@ -155,12 +155,12 @@
 /* func_54m_ck */
 
 static const struct clksel_rate func_54m_apll54_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 0 },
 };
 
 static const struct clksel_rate func_54m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 0 },
 };
 
@@ -177,7 +177,7 @@
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_54M_SOURCE,
+	.clksel_mask	= OMAP24XX_54M_SOURCE_MASK,
 	.clksel		= func_54m_clksel,
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -201,12 +201,12 @@
 /* func_48m_ck */
 
 static const struct clksel_rate func_48m_apll96_rates[] = {
-	{ .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 0 },
 };
 
 static const struct clksel_rate func_48m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 0 },
 };
 
@@ -223,7 +223,7 @@
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_48M_SOURCE,
+	.clksel_mask	= OMAP24XX_48M_SOURCE_MASK,
 	.clksel		= func_48m_clksel,
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
@@ -256,22 +256,22 @@
  * flags fields, which mark them as 2420-only.
  */
 static const struct clksel_rate common_clkout_src_core_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate common_clkout_src_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate common_clkout_src_96m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate common_clkout_src_54m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 3, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
@@ -300,7 +300,7 @@
 };
 
 static const struct clksel_rate common_clkout_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
@@ -384,7 +384,7 @@
  *
  */
 static const struct clksel_rate mpu_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
 	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
@@ -420,7 +420,7 @@
  * routed into a synchronizer and out of clocks abc.
  */
 static const struct clksel_rate dsp_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
 	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
@@ -450,7 +450,7 @@
 
 /* DSP interface clock */
 static const struct clksel_rate dsp_irate_ick_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 0 },
 };
@@ -532,7 +532,7 @@
 static const struct clksel_rate core_l3_core_rates[] = {
 	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
 	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
 	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
 	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
@@ -559,7 +559,7 @@
 /* usb_l4_ick */
 static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
 	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
@@ -591,7 +591,7 @@
  * this domain.
  */
 static const struct clksel_rate l4_core_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
@@ -622,7 +622,7 @@
  */
 static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
 	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
 	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
 	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
@@ -730,7 +730,7 @@
 /* XXX Add RATE_NOT_VALIDATED */
 
 static const struct clksel_rate dss1_fck_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
@@ -744,7 +744,7 @@
 	{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
 	{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
 	{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
-	{ .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 16, .val = 16, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
@@ -779,12 +779,12 @@
 };
 
 static const struct clksel_rate dss2_fck_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate dss2_fck_48m_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
@@ -825,7 +825,7 @@
  * functional clock parents.
  */
 static const struct clksel_rate gpt_alt_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
@@ -1588,7 +1588,7 @@
 };
 
 static const struct clksel_rate vlynq_fck_96m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_242X },
 	{ .div = 0 }
 };
 
@@ -1601,7 +1601,7 @@
 	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
 	{ .div = 9, .val = 9, .flags = RATE_IN_242X },
 	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
-	{ .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE },
+	{ .div = 16, .val = 16, .flags = RATE_IN_242X },
 	{ .div = 18, .val = 18, .flags = RATE_IN_242X },
 	{ .div = 0 }
 };
@@ -1836,7 +1836,7 @@
 	CLK(NULL,	"vlynq_ick",	&vlynq_ick,	CK_242X),
 	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
 	CLK(NULL,	"des_ick",	&des_ick,	CK_242X),
-	CLK(NULL,	"sha_ick",	&sha_ick,	CK_242X),
+	CLK("omap-sham",	"ick",	&sha_ick,	CK_242X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_242X),
 	CLK(NULL,	"aes_ick",	&aes_ick,	CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock2430_data.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock2430_data.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock2430_data.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock2430_data.c	2010-08-01 18:11:14.000000000 -0400
@@ -155,12 +155,12 @@
 /* func_54m_ck */
 
 static const struct clksel_rate func_54m_apll54_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 0 },
 };
 
 static const struct clksel_rate func_54m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 0 },
 };
 
@@ -177,7 +177,7 @@
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_54M_SOURCE,
+	.clksel_mask	= OMAP24XX_54M_SOURCE_MASK,
 	.clksel		= func_54m_clksel,
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -192,12 +192,12 @@
 
 /* func_96m_ck */
 static const struct clksel_rate func_96m_apll96_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 0 },
 };
 
 static const struct clksel_rate func_96m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_243X | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_243X },
 	{ .div = 0 },
 };
 
@@ -214,7 +214,7 @@
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP2430_96M_SOURCE,
+	.clksel_mask	= OMAP2430_96M_SOURCE_MASK,
 	.clksel		= func_96m_clksel,
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -222,12 +222,12 @@
 /* func_48m_ck */
 
 static const struct clksel_rate func_48m_apll96_rates[] = {
-	{ .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 0 },
 };
 
 static const struct clksel_rate func_48m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 0 },
 };
 
@@ -244,7 +244,7 @@
 	.clkdm_name	= "wkup_clkdm",
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP24XX_48M_SOURCE,
+	.clksel_mask	= OMAP24XX_48M_SOURCE_MASK,
 	.clksel		= func_48m_clksel,
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
@@ -277,22 +277,22 @@
  * flags fields, which mark them as 2420-only.
  */
 static const struct clksel_rate common_clkout_src_core_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate common_clkout_src_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate common_clkout_src_96m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate common_clkout_src_54m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 3, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
@@ -321,7 +321,7 @@
 };
 
 static const struct clksel_rate common_clkout_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
@@ -369,7 +369,7 @@
  *
  */
 static const struct clksel_rate mpu_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 0 },
 };
@@ -402,7 +402,7 @@
  * routed into a synchronizer and out of clocks abc.
  */
 static const struct clksel_rate dsp_fck_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
 	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
@@ -429,7 +429,7 @@
 
 /* DSP interface clock */
 static const struct clksel_rate dsp_irate_ick_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 3, .val = 3, .flags = RATE_IN_243X },
 	{ .div = 0 },
@@ -481,7 +481,7 @@
  */
 static const struct clksel_rate core_l3_core_rates[] = {
 	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
 	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
@@ -505,7 +505,7 @@
 /* usb_l4_ick */
 static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
 	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
@@ -537,7 +537,7 @@
  * this domain.
  */
 static const struct clksel_rate l4_core_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
@@ -568,7 +568,7 @@
  */
 static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
 	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
 	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
 	{ .div = 5, .val = 5, .flags = RATE_IN_243X },
@@ -673,7 +673,7 @@
  */
 static const struct clksel_rate mdm_ick_core_rates[] = {
 	{ .div = 1, .val = 1, .flags = RATE_IN_243X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_243X | DEFAULT_RATE },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X },
 	{ .div = 6, .val = 6, .flags = RATE_IN_243X },
 	{ .div = 9, .val = 9, .flags = RATE_IN_243X },
 	{ .div = 0 }
@@ -718,7 +718,7 @@
 /* XXX Add RATE_NOT_VALIDATED */
 
 static const struct clksel_rate dss1_fck_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
@@ -732,7 +732,7 @@
 	{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
 	{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
 	{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
-	{ .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 16, .val = 16, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
@@ -767,12 +767,12 @@
 };
 
 static const struct clksel_rate dss2_fck_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate dss2_fck_48m_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
@@ -813,7 +813,7 @@
  * functional clock parents.
  */
 static const struct clksel_rate gpt_alt_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX },
 	{ .div = 0 }
 };
 
@@ -1924,7 +1924,7 @@
 	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_243X),
 	CLK(NULL,	"des_ick",	&des_ick,	CK_243X),
-	CLK(NULL,	"sha_ick",	&sha_ick,	CK_243X),
+	CLK("omap-sham",	"ick",	&sha_ick,	CK_243X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X),
 	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X),
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock3xxx_data.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock3xxx_data.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock3xxx_data.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock3xxx_data.c	2010-08-01 18:11:14.000000000 -0400
@@ -110,32 +110,32 @@
 };
 
 static const struct clksel_rate osc_sys_12m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate osc_sys_13m_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate osc_sys_16_8m_rates[] = {
-	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE },
+	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2PLUS },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate osc_sys_19_2m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 2, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate osc_sys_26m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 3, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate osc_sys_38_4m_rates[] = {
-	{ .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 4, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
@@ -163,8 +163,8 @@
 };
 
 static const struct clksel_rate div2_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
@@ -213,42 +213,42 @@
 /* CM CLOCKS */
 
 static const struct clksel_rate div16_dpll_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 5, .val = 5, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 7, .val = 7, .flags = RATE_IN_343X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
-	{ .div = 9, .val = 9, .flags = RATE_IN_343X },
-	{ .div = 10, .val = 10, .flags = RATE_IN_343X },
-	{ .div = 11, .val = 11, .flags = RATE_IN_343X },
-	{ .div = 12, .val = 12, .flags = RATE_IN_343X },
-	{ .div = 13, .val = 13, .flags = RATE_IN_343X },
-	{ .div = 14, .val = 14, .flags = RATE_IN_343X },
-	{ .div = 15, .val = 15, .flags = RATE_IN_343X },
-	{ .div = 16, .val = 16, .flags = RATE_IN_343X },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_3XXX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3XXX },
+	{ .div = 7, .val = 7, .flags = RATE_IN_3XXX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3XXX },
+	{ .div = 9, .val = 9, .flags = RATE_IN_3XXX },
+	{ .div = 10, .val = 10, .flags = RATE_IN_3XXX },
+	{ .div = 11, .val = 11, .flags = RATE_IN_3XXX },
+	{ .div = 12, .val = 12, .flags = RATE_IN_3XXX },
+	{ .div = 13, .val = 13, .flags = RATE_IN_3XXX },
+	{ .div = 14, .val = 14, .flags = RATE_IN_3XXX },
+	{ .div = 15, .val = 15, .flags = RATE_IN_3XXX },
+	{ .div = 16, .val = 16, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
-static const struct clksel_rate div32_dpll4_rates_3630[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_36XX | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_36XX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_36XX },
-	{ .div = 4, .val = 4, .flags = RATE_IN_36XX },
-	{ .div = 5, .val = 5, .flags = RATE_IN_36XX },
-	{ .div = 6, .val = 6, .flags = RATE_IN_36XX },
-	{ .div = 7, .val = 7, .flags = RATE_IN_36XX },
-	{ .div = 8, .val = 8, .flags = RATE_IN_36XX },
-	{ .div = 9, .val = 9, .flags = RATE_IN_36XX },
-	{ .div = 10, .val = 10, .flags = RATE_IN_36XX },
-	{ .div = 11, .val = 11, .flags = RATE_IN_36XX },
-	{ .div = 12, .val = 12, .flags = RATE_IN_36XX },
-	{ .div = 13, .val = 13, .flags = RATE_IN_36XX },
-	{ .div = 14, .val = 14, .flags = RATE_IN_36XX },
-	{ .div = 15, .val = 15, .flags = RATE_IN_36XX },
-	{ .div = 16, .val = 16, .flags = RATE_IN_36XX },
+static const struct clksel_rate dpll4_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_3XXX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3XXX },
+	{ .div = 7, .val = 7, .flags = RATE_IN_3XXX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3XXX },
+	{ .div = 9, .val = 9, .flags = RATE_IN_3XXX },
+	{ .div = 10, .val = 10, .flags = RATE_IN_3XXX },
+	{ .div = 11, .val = 11, .flags = RATE_IN_3XXX },
+	{ .div = 12, .val = 12, .flags = RATE_IN_3XXX },
+	{ .div = 13, .val = 13, .flags = RATE_IN_3XXX },
+	{ .div = 14, .val = 14, .flags = RATE_IN_3XXX },
+	{ .div = 15, .val = 15, .flags = RATE_IN_3XXX },
+	{ .div = 16, .val = 16, .flags = RATE_IN_3XXX },
 	{ .div = 17, .val = 17, .flags = RATE_IN_36XX },
 	{ .div = 18, .val = 18, .flags = RATE_IN_36XX },
 	{ .div = 19, .val = 19, .flags = RATE_IN_36XX },
@@ -450,37 +450,37 @@
 };
 
 static const struct clksel_rate div31_dpll3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2 },
-	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2 },
-	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2 },
-	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2 },
-	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2 },
-	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2 },
-	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2 },
-	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2 },
-	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2 },
-	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2 },
-	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2 },
-	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2 },
-	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2 },
-	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2 },
-	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2 },
-	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2 },
-	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2 },
-	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2 },
-	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2 },
-	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2 },
-	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2 },
-	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2 },
-	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2 },
-	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2 },
-	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2 },
-	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2 },
-	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2 },
-	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2 },
-	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2 },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2PLUS },
 	{ .div = 0 },
 };
 
@@ -562,6 +562,7 @@
 /* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
 /* Type: DPLL */
 static struct dpll_data dpll4_dd;
+
 static struct dpll_data dpll4_dd_34xx __initdata = {
 	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
 	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
@@ -632,39 +633,20 @@
 	.recalc		= &omap3_clkoutx2_recalc,
 };
 
-static const struct clksel div16_dpll4_clksel[] = {
-	{ .parent = &dpll4_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-static const struct clksel div32_dpll4_clksel[] = {
-	{ .parent = &dpll4_ck, .rates = div32_dpll4_rates_3630 },
+static const struct clksel dpll4_clksel[] = {
+	{ .parent = &dpll4_ck, .rates = dpll4_rates },
 	{ .parent = NULL }
 };
 
 /* This virtual clock is the source for dpll4_m2x2_ck */
-static struct clk dpll4_m2_ck;
-
-static struct clk dpll4_m2_ck_34xx __initdata = {
-	.name		= "dpll4_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
-	.clksel_mask	= OMAP3430_DIV_96M_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dpll4_m2_ck_3630 __initdata  = {
+static struct clk dpll4_m2_ck = {
 	.name		= "dpll4_m2_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
 	.clksel_mask	= OMAP3630_DIV_96M_MASK,
-	.clksel		= div32_dpll4_clksel,
+	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -698,7 +680,7 @@
 
 static const struct clksel_rate omap_96m_alwon_fck_rates[] = {
 	{ .div = 1, .val = 1, .flags = RATE_IN_36XX },
-	{ .div = 2, .val = 2, .flags = RATE_IN_36XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_36XX },
 	{ .div = 0 }
 };
 
@@ -708,12 +690,12 @@
 };
 
 static const struct clksel_rate omap_96m_dpll_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate omap_96m_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
@@ -760,28 +742,14 @@
 };
 
 /* This virtual clock is the source for dpll4_m3x2_ck */
-static struct clk dpll4_m3_ck;
-
-static struct clk dpll4_m3_ck_34xx __initdata = {
+static struct clk dpll4_m3_ck = {
 	.name		= "dpll4_m3_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dpll4_m3_ck_3630 __initdata = {
-	.name		= "dpll4_m3_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3630_CLKSEL_TV_MASK,
-	.clksel		= div32_dpll4_clksel,
+	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -799,12 +767,12 @@
 };
 
 static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate omap_54m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
@@ -825,12 +793,12 @@
 };
 
 static const struct clksel_rate omap_48m_cm96m_rates[] = {
-	{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 0, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate omap_48m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
@@ -858,31 +826,15 @@
 	.recalc		= &omap_fixed_divisor_recalc,
 };
 
-/* This virstual clock is the source for dpll4_m4x2_ck */
-static struct clk dpll4_m4_ck;
-
-static struct clk dpll4_m4_ck_34xx __initdata = {
+/* This virtual clock is the source for dpll4_m4x2_ck */
+static struct clk dpll4_m4_ck = {
 	.name		= "dpll4_m4_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-	.set_rate	= &omap2_clksel_set_rate,
-	.round_rate	= &omap2_clksel_round_rate,
-};
-
-static struct clk dpll4_m4_ck_3630 __initdata = {
-	.name		= "dpll4_m4_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3630_CLKSEL_DSS1_MASK,
-	.clksel		= div32_dpll4_clksel,
+	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 	.set_rate	= &omap2_clksel_set_rate,
@@ -902,30 +854,14 @@
 };
 
 /* This virtual clock is the source for dpll4_m5x2_ck */
-static struct clk dpll4_m5_ck;
-
-static struct clk dpll4_m5_ck_34xx __initdata = {
+static struct clk dpll4_m5_ck = {
 	.name		= "dpll4_m5_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
 	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.set_rate	= &omap2_clksel_set_rate,
-	.round_rate	= &omap2_clksel_round_rate,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dpll4_m5_ck_3630 __initdata = {
-	.name		= "dpll4_m5_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3630_CLKSEL_CAM_MASK,
-	.clksel		= div32_dpll4_clksel,
+	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.set_rate	= &omap2_clksel_set_rate,
 	.round_rate	= &omap2_clksel_round_rate,
@@ -945,28 +881,14 @@
 };
 
 /* This virtual clock is the source for dpll4_m6x2_ck */
-static struct clk dpll4_m6_ck;
-
-static struct clk dpll4_m6_ck_34xx __initdata = {
+static struct clk dpll4_m6_ck = {
 	.name		= "dpll4_m6_ck",
 	.ops		= &clkops_null,
 	.parent		= &dpll4_ck,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dpll4_m6_ck_3630 __initdata = {
-	.name		= "dpll4_m6_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3630_DIV_DPLL4_MASK,
-	.clksel		= div32_dpll4_clksel,
+	.clksel		= dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
 	.recalc		= &omap2_clksel_recalc,
 };
@@ -1049,22 +971,22 @@
 /* CM EXTERNAL CLOCK OUTPUTS */
 
 static const struct clksel_rate clkout2_src_core_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate clkout2_src_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate clkout2_src_96m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 2, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate clkout2_src_54m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 3, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
@@ -1090,11 +1012,11 @@
 };
 
 static const struct clksel_rate sys_clkout2_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 8, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 16, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 8, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 16, .val = 4, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
@@ -1111,6 +1033,8 @@
 	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
 	.clksel		= sys_clkout2_clksel,
 	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
 };
 
 /* CM OUTPUT CLOCKS */
@@ -1125,9 +1049,9 @@
 /* DPLL power domain clock controls */
 
 static const struct clksel_rate div4_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
@@ -1161,8 +1085,8 @@
 
 /* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
 static const struct clksel_rate arm_fck_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 1, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
@@ -1333,25 +1257,25 @@
 
 static const struct clksel_rate sgx_core_rates[] = {
 	{ .div = 2, .val = 5, .flags = RATE_IN_36XX },
-	{ .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 4, .val = 1, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 0, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 6, .val = 2, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
 static const struct clksel_rate sgx_192m_rates[] = {
-	{ .div = 1,  .val = 4, .flags = RATE_IN_36XX | DEFAULT_RATE },
+	{ .div = 1,  .val = 4, .flags = RATE_IN_36XX },
 	{ .div = 0 },
 };
 
 static const struct clksel_rate sgx_corex2_rates[] = {
-	{ .div = 3, .val = 6, .flags = RATE_IN_36XX | DEFAULT_RATE },
+	{ .div = 3, .val = 6, .flags = RATE_IN_36XX },
 	{ .div = 5, .val = 7, .flags = RATE_IN_36XX },
 	{ .div = 0 },
 };
 
 static const struct clksel_rate sgx_96m_rates[] = {
-	{ .div = 1,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1,  .val = 3, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
@@ -1576,12 +1500,12 @@
  * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck.
  */
 static const struct clksel_rate common_mcbsp_96m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
 static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
@@ -1714,12 +1638,12 @@
 /* DPLL3-derived clock */
 
 static const struct clksel_rate ssi_ssr_corex2_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3XXX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
@@ -2353,18 +2277,18 @@
 /* WKUP */
 
 static const struct clksel_rate usim_96m_rates[] = {
-	{ .div = 2,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 4,  .val = 4, .flags = RATE_IN_343X },
-	{ .div = 8,  .val = 5, .flags = RATE_IN_343X },
-	{ .div = 10, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 2,  .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 4,  .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 8,  .val = 5, .flags = RATE_IN_3XXX },
+	{ .div = 10, .val = 6, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
 static const struct clksel_rate usim_120m_rates[] = {
-	{ .div = 4,  .val = 7,	.flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 8,  .val = 8,	.flags = RATE_IN_343X },
-	{ .div = 16, .val = 9,	.flags = RATE_IN_343X },
-	{ .div = 20, .val = 10, .flags = RATE_IN_343X },
+	{ .div = 4,  .val = 7,	.flags = RATE_IN_3XXX },
+	{ .div = 8,  .val = 8,	.flags = RATE_IN_3XXX },
+	{ .div = 16, .val = 9,	.flags = RATE_IN_3XXX },
+	{ .div = 20, .val = 10, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
@@ -2951,22 +2875,22 @@
 /* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */
 
 static const struct clksel_rate emu_src_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 0, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
 static const struct clksel_rate emu_src_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
 static const struct clksel_rate emu_src_per_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 2, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
 static const struct clksel_rate emu_src_mpu_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 1, .val = 3, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
@@ -2995,10 +2919,10 @@
 };
 
 static const struct clksel_rate pclk_emu_rates[] = {
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
@@ -3019,9 +2943,9 @@
 };
 
 static const struct clksel_rate pclkx2_emu_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
@@ -3069,9 +2993,9 @@
 };
 
 static const struct clksel_rate traceclk_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3XXX },
 	{ .div = 0 },
 };
 
@@ -3360,7 +3284,7 @@
 	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2 | CK_AM35XX),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
 	CLK(NULL,	"aes2_ick",	&aes2_ick,	CK_343X),
-	CLK(NULL,	"sha12_ick",	&sha12_ick,	CK_343X),
+	CLK("omap-sham",	"ick",	&sha12_ick,	CK_343X),
 	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
 	CLK("mmci-omap-hs.1",	"ick",	&mmchs2_ick,	CK_3XXX),
 	CLK("mmci-omap-hs.0",	"ick",	&mmchs1_ick,	CK_3XXX),
@@ -3472,8 +3396,8 @@
 	CLK(NULL,	"ipss_ick",	&ipss_ick,	CK_AM35XX),
 	CLK(NULL,	"rmii_ck",	&rmii_ck,	CK_AM35XX),
 	CLK(NULL,	"pclk_ck",	&pclk_ck,	CK_AM35XX),
-	CLK("davinci_emac",	"ick",		&emac_ick,	CK_AM35XX),
-	CLK("davinci_emac",	"fck",		&emac_fck,	CK_AM35XX),
+	CLK("davinci_emac",	"emac_clk",	&emac_ick,	CK_AM35XX),
+	CLK("davinci_emac",	"phy_clk",	&emac_fck,	CK_AM35XX),
 	CLK("vpfe-capture",	"master",	&vpfe_ick,	CK_AM35XX),
 	CLK("vpfe-capture",	"slave",	&vpfe_fck,	CK_AM35XX),
 	CLK("musb_hdrc",	"ick",		&hsotgusb_ick_am35xx,	CK_AM35XX),
@@ -3488,14 +3412,8 @@
 	struct omap_clk *c;
 	u32 cpu_clkflg = CK_3XXX;
 
-	if (cpu_is_omap3517()) {
-		cpu_mask = RATE_IN_343X | RATE_IN_3430ES2;
-		cpu_clkflg |= CK_3517;
-	} else if (cpu_is_omap3505()) {
-		cpu_mask = RATE_IN_343X | RATE_IN_3430ES2;
-		cpu_clkflg |= CK_3505;
-	} else if (cpu_is_omap34xx()) {
-		cpu_mask = RATE_IN_343X;
+	if (cpu_is_omap34xx()) {
+		cpu_mask = RATE_IN_3XXX;
 		cpu_clkflg |= CK_343X;
 
 		/*
@@ -3506,10 +3424,17 @@
 			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
 			cpu_clkflg |= CK_3430ES1;
 		} else {
-			cpu_mask |= RATE_IN_3430ES2;
+			cpu_mask |= RATE_IN_3430ES2PLUS;
 			cpu_clkflg |= CK_3430ES2;
 		}
+	} else if (cpu_is_omap3517()) {
+		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+		cpu_clkflg |= CK_3517;
+	} else if (cpu_is_omap3505()) {
+		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
+		cpu_clkflg |= CK_3505;
 	}
+
 	if (omap3_has_192mhz_clk())
 		omap_96m_alwon_fck = omap_96m_alwon_fck_3630;
 
@@ -3520,14 +3445,7 @@
 		/*
 		 * XXX This type of dynamic rewriting of the clock tree is
 		 * deprecated and should be revised soon.
-		 */
-		dpll4_m2_ck = dpll4_m2_ck_3630;
-		dpll4_m3_ck = dpll4_m3_ck_3630;
-		dpll4_m4_ck = dpll4_m4_ck_3630;
-		dpll4_m5_ck = dpll4_m5_ck_3630;
-		dpll4_m6_ck = dpll4_m6_ck_3630;
-
-		/*
+		 *
 		 * For 3630: override clkops_omap2_dflt_wait for the
 		 * clocks affected from PWRDN reset Limitation
 		 */
@@ -3543,18 +3461,12 @@
 				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
 		dpll4_m6x2_ck.ops =
 				&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
-	} else {
-		/*
-		 * XXX This type of dynamic rewriting of the clock tree is
-		 * deprecated and should be revised soon.
-		 */
-		dpll4_m2_ck = dpll4_m2_ck_34xx;
-		dpll4_m3_ck = dpll4_m3_ck_34xx;
-		dpll4_m4_ck = dpll4_m4_ck_34xx;
-		dpll4_m5_ck = dpll4_m5_ck_34xx;
-		dpll4_m6_ck = dpll4_m6_ck_34xx;
 	}
 
+	/*
+	 * XXX This type of dynamic rewriting of the clock tree is
+	 * deprecated and should be revised soon.
+	 */
 	if (cpu_is_omap3630())
 		dpll4_dd = dpll4_dd_3630;
 	else
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock44xx_data.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock44xx_data.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock44xx_data.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock44xx_data.c	2010-08-01 18:11:14.000000000 -0400
@@ -1369,6 +1369,7 @@
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "l3_emif_clkdm",
 	.parent		= &ddrphy_ck,
 	.recalc		= &followparent_recalc,
@@ -1379,6 +1380,7 @@
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "l3_emif_clkdm",
 	.parent		= &ddrphy_ck,
 	.recalc		= &followparent_recalc,
@@ -2675,6 +2677,11 @@
 	CLK("omap2_mcspi.2",	"ick",			&dummy_ck,	CK_443X),
 	CLK("omap2_mcspi.3",	"ick",			&dummy_ck,	CK_443X),
 	CLK("omap2_mcspi.4",	"ick",			&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.0",	"ick",		&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.1",	"ick",		&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.2",	"ick",		&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.3",	"ick",		&dummy_ck,	CK_443X),
+	CLK("mmci-omap-hs.4",	"ick",		&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart1_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart2_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart3_ick",			&dummy_ck,	CK_443X),
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -334,6 +334,15 @@
 	return ret;
 }
 
+/* Given a clock and a rate apply a clock specific rounding function */
+long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk->round_rate)
+		return clk->round_rate(clk, rate);
+
+	return clk->rate;
+}
+
 /* Set the clock rate for a clock source */
 int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock_common_data.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock_common_data.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock_common_data.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock_common_data.c	2010-08-01 18:11:14.000000000 -0400
@@ -20,20 +20,20 @@
 
 /* clksel_rate data common to 24xx/343x */
 const struct clksel_rate gpt_32k_rates[] = {
-	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_3XXX },
 	 { .div = 0 }
 };
 
 const struct clksel_rate gpt_sys_rates[] = {
-	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
 	 { .div = 0 }
 };
 
 const struct clksel_rate gfx_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_3XXX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_3XXX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_3XXX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_3XXX },
 	{ .div = 0 }
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clockdomain.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clockdomain.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clockdomain.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clockdomain.c	2010-08-01 18:11:14.000000000 -0400
@@ -809,7 +809,7 @@
 
 	if (cpu_is_omap24xx()) {
 
-		cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
+		cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
 			    clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
 
 	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
@@ -853,7 +853,7 @@
 
 	if (cpu_is_omap24xx()) {
 
-		cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
+		cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
 			      clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
 
 	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clockdomains44xx.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clockdomains44xx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clockdomains44xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clockdomains44xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -131,7 +131,7 @@
 static struct clockdomain mpu0_44xx_clkdm = {
 	.name		  = "mpu0_clkdm",
 	.pwrdm		  = { .name = "cpu0_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_PDA_CPU0_CLKSTCTRL,
+	.clkstctrl_reg	  = OMAP4430_CM_CPU0_CLKSTCTRL,
 	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
 	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
@@ -140,7 +140,7 @@
 static struct clockdomain mpu1_44xx_clkdm = {
 	.name		  = "mpu1_clkdm",
 	.pwrdm		  = { .name = "cpu1_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_PDA_CPU1_CLKSTCTRL,
+	.clkstctrl_reg	  = OMAP4430_CM_CPU1_CLKSTCTRL,
 	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
 	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -73,19 +73,20 @@
 #define omap2_clk_disable_unused	NULL
 #endif
 
-unsigned long omap2_clksel_recalc(struct clk *clk);
 void omap2_init_clk_clkdm(struct clk *clk);
-void omap2_init_clksel_parent(struct clk *clk);
-u32 omap2_clksel_get_divisor(struct clk *clk);
+
+/* clkt_clksel.c public functions */
 u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
 				u32 *new_div);
-u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
-u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
+void omap2_init_clksel_parent(struct clk *clk);
+unsigned long omap2_clksel_recalc(struct clk *clk);
 long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
 int omap2_clksel_set_parent(struct clk *clk, struct clk *new_parent);
+
 u32 omap2_get_dpll_rate(struct clk *clk);
 void omap2_init_dpll_parent(struct clk *clk);
+
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
 
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/cm44xx.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/cm44xx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/cm44xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/cm44xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,8 +1,8 @@
 /*
  * OMAP44xx CM1 & CM2 instance offset macros
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley (paul@pwsan.com)
  * Rajendra Nayak (rnayak@ti.com)
@@ -25,334 +25,557 @@
 
 /* CM1 */
 
-
 /* CM1.OCP_SOCKET_CM1 register offsets */
+#define OMAP4_REVISION_CM1_OFFSET			0x0000
 #define OMAP4430_REVISION_CM1				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4_CM_CM1_PROFILING_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_CM_CM1_PROFILING_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0040)
 
 /* CM1.CKGEN_CM1 register offsets */
+#define OMAP4_CM_CLKSEL_CORE_OFFSET			0x0000
 #define OMAP4430_CM_CLKSEL_CORE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0000)
+#define OMAP4_CM_CLKSEL_ABE_OFFSET			0x0008
 #define OMAP4430_CM_CLKSEL_ABE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0008)
+#define OMAP4_CM_DLL_CTRL_OFFSET			0x0010
 #define OMAP4430_CM_DLL_CTRL				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0010)
+#define OMAP4_CM_CLKMODE_DPLL_CORE_OFFSET		0x0020
 #define OMAP4430_CM_CLKMODE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0020)
+#define OMAP4_CM_IDLEST_DPLL_CORE_OFFSET		0x0024
 #define OMAP4430_CM_IDLEST_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0024)
+#define OMAP4_CM_AUTOIDLE_DPLL_CORE_OFFSET		0x0028
 #define OMAP4430_CM_AUTOIDLE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0028)
+#define OMAP4_CM_CLKSEL_DPLL_CORE_OFFSET		0x002c
 #define OMAP4430_CM_CLKSEL_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x002c)
+#define OMAP4_CM_DIV_M2_DPLL_CORE_OFFSET		0x0030
 #define OMAP4430_CM_DIV_M2_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0030)
+#define OMAP4_CM_DIV_M3_DPLL_CORE_OFFSET		0x0034
 #define OMAP4430_CM_DIV_M3_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0034)
+#define OMAP4_CM_DIV_M4_DPLL_CORE_OFFSET		0x0038
 #define OMAP4430_CM_DIV_M4_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0038)
+#define OMAP4_CM_DIV_M5_DPLL_CORE_OFFSET		0x003c
 #define OMAP4430_CM_DIV_M5_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x003c)
+#define OMAP4_CM_DIV_M6_DPLL_CORE_OFFSET		0x0040
 #define OMAP4430_CM_DIV_M6_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0040)
+#define OMAP4_CM_DIV_M7_DPLL_CORE_OFFSET		0x0044
 #define OMAP4430_CM_DIV_M7_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0044)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0048
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0048)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET	0x004c
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x004c)
+#define OMAP4_CM_EMU_OVERRIDE_DPLL_CORE_OFFSET		0x0050
 #define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0050)
+#define OMAP4_CM_CLKMODE_DPLL_MPU_OFFSET		0x0060
 #define OMAP4430_CM_CLKMODE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0060)
+#define OMAP4_CM_IDLEST_DPLL_MPU_OFFSET			0x0064
 #define OMAP4430_CM_IDLEST_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0064)
+#define OMAP4_CM_AUTOIDLE_DPLL_MPU_OFFSET		0x0068
 #define OMAP4430_CM_AUTOIDLE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0068)
+#define OMAP4_CM_CLKSEL_DPLL_MPU_OFFSET			0x006c
 #define OMAP4430_CM_CLKSEL_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x006c)
+#define OMAP4_CM_DIV_M2_DPLL_MPU_OFFSET			0x0070
 #define OMAP4430_CM_DIV_M2_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0070)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET		0x0088
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0088)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET		0x008c
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x008c)
+#define OMAP4_CM_BYPCLK_DPLL_MPU_OFFSET			0x009c
 #define OMAP4430_CM_BYPCLK_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x009c)
+#define OMAP4_CM_CLKMODE_DPLL_IVA_OFFSET		0x00a0
 #define OMAP4430_CM_CLKMODE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a0)
+#define OMAP4_CM_IDLEST_DPLL_IVA_OFFSET			0x00a4
 #define OMAP4430_CM_IDLEST_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a4)
+#define OMAP4_CM_AUTOIDLE_DPLL_IVA_OFFSET		0x00a8
 #define OMAP4430_CM_AUTOIDLE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a8)
+#define OMAP4_CM_CLKSEL_DPLL_IVA_OFFSET			0x00ac
 #define OMAP4430_CM_CLKSEL_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ac)
+#define OMAP4_CM_DIV_M4_DPLL_IVA_OFFSET			0x00b8
 #define OMAP4430_CM_DIV_M4_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00b8)
+#define OMAP4_CM_DIV_M5_DPLL_IVA_OFFSET			0x00bc
 #define OMAP4430_CM_DIV_M5_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00bc)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET		0x00c8
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00c8)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET		0x00cc
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00cc)
+#define OMAP4_CM_BYPCLK_DPLL_IVA_OFFSET			0x00dc
 #define OMAP4430_CM_BYPCLK_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00dc)
+#define OMAP4_CM_CLKMODE_DPLL_ABE_OFFSET		0x00e0
 #define OMAP4430_CM_CLKMODE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e0)
+#define OMAP4_CM_IDLEST_DPLL_ABE_OFFSET			0x00e4
 #define OMAP4430_CM_IDLEST_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e4)
+#define OMAP4_CM_AUTOIDLE_DPLL_ABE_OFFSET		0x00e8
 #define OMAP4430_CM_AUTOIDLE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e8)
+#define OMAP4_CM_CLKSEL_DPLL_ABE_OFFSET			0x00ec
 #define OMAP4430_CM_CLKSEL_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ec)
+#define OMAP4_CM_DIV_M2_DPLL_ABE_OFFSET			0x00f0
 #define OMAP4430_CM_DIV_M2_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f0)
+#define OMAP4_CM_DIV_M3_DPLL_ABE_OFFSET			0x00f4
 #define OMAP4430_CM_DIV_M3_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f4)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET		0x0108
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0108)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET		0x010c
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x010c)
+#define OMAP4_CM_CLKMODE_DPLL_DDRPHY_OFFSET		0x0120
 #define OMAP4430_CM_CLKMODE_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0120)
+#define OMAP4_CM_IDLEST_DPLL_DDRPHY_OFFSET		0x0124
 #define OMAP4430_CM_IDLEST_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0124)
+#define OMAP4_CM_AUTOIDLE_DPLL_DDRPHY_OFFSET		0x0128
 #define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0128)
+#define OMAP4_CM_CLKSEL_DPLL_DDRPHY_OFFSET		0x012c
 #define OMAP4430_CM_CLKSEL_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x012c)
+#define OMAP4_CM_DIV_M2_DPLL_DDRPHY_OFFSET		0x0130
 #define OMAP4430_CM_DIV_M2_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0130)
+#define OMAP4_CM_DIV_M4_DPLL_DDRPHY_OFFSET		0x0138
 #define OMAP4430_CM_DIV_M4_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0138)
+#define OMAP4_CM_DIV_M5_DPLL_DDRPHY_OFFSET		0x013c
 #define OMAP4430_CM_DIV_M5_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x013c)
+#define OMAP4_CM_DIV_M6_DPLL_DDRPHY_OFFSET		0x0140
 #define OMAP4430_CM_DIV_M6_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0140)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_DDRPHY_OFFSET	0x0148
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0148)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_DDRPHY_OFFSET	0x014c
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x014c)
+#define OMAP4_CM_SHADOW_FREQ_CONFIG1_OFFSET		0x0160
 #define OMAP4430_CM_SHADOW_FREQ_CONFIG1			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0160)
+#define OMAP4_CM_SHADOW_FREQ_CONFIG2_OFFSET		0x0164
 #define OMAP4430_CM_SHADOW_FREQ_CONFIG2			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0164)
+#define OMAP4_CM_DYN_DEP_PRESCAL_OFFSET			0x0170
 #define OMAP4430_CM_DYN_DEP_PRESCAL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0170)
+#define OMAP4_CM_RESTORE_ST_OFFSET			0x0180
 #define OMAP4430_CM_RESTORE_ST				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0180)
 
 /* CM1.MPU_CM1 register offsets */
+#define OMAP4_CM_MPU_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_MPU_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0000)
+#define OMAP4_CM_MPU_STATICDEP_OFFSET			0x0004
 #define OMAP4430_CM_MPU_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0004)
+#define OMAP4_CM_MPU_DYNAMICDEP_OFFSET			0x0008
 #define OMAP4430_CM_MPU_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0008)
+#define OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET			0x0020
 #define OMAP4430_CM_MPU_MPU_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0020)
 
 /* CM1.TESLA_CM1 register offsets */
+#define OMAP4_CM_TESLA_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_TESLA_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0000)
+#define OMAP4_CM_TESLA_STATICDEP_OFFSET			0x0004
 #define OMAP4430_CM_TESLA_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0004)
+#define OMAP4_CM_TESLA_DYNAMICDEP_OFFSET		0x0008
 #define OMAP4430_CM_TESLA_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0008)
+#define OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_TESLA_TESLA_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0020)
 
 /* CM1.ABE_CM1 register offsets */
+#define OMAP4_CM1_ABE_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM1_ABE_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0000)
+#define OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM1_ABE_L4ABE_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0020)
+#define OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM1_ABE_AESS_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0028)
+#define OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET		0x0030
 #define OMAP4430_CM1_ABE_PDM_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0030)
+#define OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET		0x0038
 #define OMAP4430_CM1_ABE_DMIC_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0038)
+#define OMAP4_CM1_ABE_MCASP_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_CM1_ABE_MCASP_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0040)
+#define OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET		0x0048
 #define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0048)
+#define OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET		0x0050
 #define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0050)
+#define OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET		0x0058
 #define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0058)
+#define OMAP4_CM1_ABE_SLIMBUS_CLKCTRL_OFFSET		0x0060
 #define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0060)
+#define OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET		0x0068
 #define OMAP4430_CM1_ABE_TIMER5_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0068)
+#define OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET		0x0070
 #define OMAP4430_CM1_ABE_TIMER6_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0070)
+#define OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET		0x0078
 #define OMAP4430_CM1_ABE_TIMER7_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0078)
+#define OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET		0x0080
 #define OMAP4430_CM1_ABE_TIMER8_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0080)
+#define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET		0x0088
 #define OMAP4430_CM1_ABE_WDT3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0088)
 
-/* CM1.RESTORE_CM1 register offsets */
-#define OMAP4430_CM_CLKSEL_CORE_RESTORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0000)
-#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0004)
-#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0008)
-#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x000c)
-#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0010)
-#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0014)
-#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0018)
-#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x001c)
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0020)
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0024)
-#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0028)
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x002c)
-#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0030)
-#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0034)
-
 /* CM2 */
 
-
 /* CM2.OCP_SOCKET_CM2 register offsets */
+#define OMAP4_REVISION_CM2_OFFSET			0x0000
 #define OMAP4430_REVISION_CM2				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4_CM_CM2_PROFILING_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_CM_CM2_PROFILING_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0040)
 
 /* CM2.CKGEN_CM2 register offsets */
+#define OMAP4_CM_CLKSEL_DUCATI_ISS_ROOT_OFFSET		0x0000
 #define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0000)
+#define OMAP4_CM_CLKSEL_USB_60MHZ_OFFSET		0x0004
 #define OMAP4430_CM_CLKSEL_USB_60MHZ			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0004)
+#define OMAP4_CM_SCALE_FCLK_OFFSET			0x0008
 #define OMAP4430_CM_SCALE_FCLK				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0008)
+#define OMAP4_CM_CORE_DVFS_PERF1_OFFSET			0x0010
 #define OMAP4430_CM_CORE_DVFS_PERF1			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0010)
+#define OMAP4_CM_CORE_DVFS_PERF2_OFFSET			0x0014
 #define OMAP4430_CM_CORE_DVFS_PERF2			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0014)
+#define OMAP4_CM_CORE_DVFS_PERF3_OFFSET			0x0018
 #define OMAP4430_CM_CORE_DVFS_PERF3			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0018)
+#define OMAP4_CM_CORE_DVFS_PERF4_OFFSET			0x001c
 #define OMAP4430_CM_CORE_DVFS_PERF4			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x001c)
+#define OMAP4_CM_CORE_DVFS_CURRENT_OFFSET		0x0024
 #define OMAP4430_CM_CORE_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0024)
+#define OMAP4_CM_IVA_DVFS_PERF_TESLA_OFFSET		0x0028
 #define OMAP4430_CM_IVA_DVFS_PERF_TESLA			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0028)
+#define OMAP4_CM_IVA_DVFS_PERF_IVAHD_OFFSET		0x002c
 #define OMAP4430_CM_IVA_DVFS_PERF_IVAHD			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x002c)
+#define OMAP4_CM_IVA_DVFS_PERF_ABE_OFFSET		0x0030
 #define OMAP4430_CM_IVA_DVFS_PERF_ABE			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0030)
+#define OMAP4_CM_IVA_DVFS_CURRENT_OFFSET		0x0038
 #define OMAP4430_CM_IVA_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0038)
+#define OMAP4_CM_CLKMODE_DPLL_PER_OFFSET		0x0040
 #define OMAP4430_CM_CLKMODE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0040)
+#define OMAP4_CM_IDLEST_DPLL_PER_OFFSET			0x0044
 #define OMAP4430_CM_IDLEST_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0044)
+#define OMAP4_CM_AUTOIDLE_DPLL_PER_OFFSET		0x0048
 #define OMAP4430_CM_AUTOIDLE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0048)
+#define OMAP4_CM_CLKSEL_DPLL_PER_OFFSET			0x004c
 #define OMAP4430_CM_CLKSEL_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x004c)
+#define OMAP4_CM_DIV_M2_DPLL_PER_OFFSET			0x0050
 #define OMAP4430_CM_DIV_M2_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0050)
+#define OMAP4_CM_DIV_M3_DPLL_PER_OFFSET			0x0054
 #define OMAP4430_CM_DIV_M3_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0054)
+#define OMAP4_CM_DIV_M4_DPLL_PER_OFFSET			0x0058
 #define OMAP4430_CM_DIV_M4_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0058)
+#define OMAP4_CM_DIV_M5_DPLL_PER_OFFSET			0x005c
 #define OMAP4430_CM_DIV_M5_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x005c)
+#define OMAP4_CM_DIV_M6_DPLL_PER_OFFSET			0x0060
 #define OMAP4430_CM_DIV_M6_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0060)
+#define OMAP4_CM_DIV_M7_DPLL_PER_OFFSET			0x0064
 #define OMAP4430_CM_DIV_M7_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0064)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET		0x0068
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0068)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET		0x006c
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x006c)
+#define OMAP4_CM_EMU_OVERRIDE_DPLL_PER_OFFSET		0x0070
 #define OMAP4430_CM_EMU_OVERRIDE_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0070)
+#define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET		0x0080
 #define OMAP4430_CM_CLKMODE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0080)
+#define OMAP4_CM_IDLEST_DPLL_USB_OFFSET			0x0084
 #define OMAP4430_CM_IDLEST_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0084)
+#define OMAP4_CM_AUTOIDLE_DPLL_USB_OFFSET		0x0088
 #define OMAP4430_CM_AUTOIDLE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0088)
+#define OMAP4_CM_CLKSEL_DPLL_USB_OFFSET			0x008c
 #define OMAP4430_CM_CLKSEL_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x008c)
+#define OMAP4_CM_DIV_M2_DPLL_USB_OFFSET			0x0090
 #define OMAP4430_CM_DIV_M2_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0090)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET		0x00a8
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00a8)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET		0x00ac
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ac)
+#define OMAP4_CM_CLKDCOLDO_DPLL_USB_OFFSET		0x00b4
 #define OMAP4430_CM_CLKDCOLDO_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00b4)
+#define OMAP4_CM_CLKMODE_DPLL_UNIPRO_OFFSET		0x00c0
 #define OMAP4430_CM_CLKMODE_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c0)
+#define OMAP4_CM_IDLEST_DPLL_UNIPRO_OFFSET		0x00c4
 #define OMAP4430_CM_IDLEST_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c4)
+#define OMAP4_CM_AUTOIDLE_DPLL_UNIPRO_OFFSET		0x00c8
 #define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c8)
+#define OMAP4_CM_CLKSEL_DPLL_UNIPRO_OFFSET		0x00cc
 #define OMAP4430_CM_CLKSEL_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00cc)
+#define OMAP4_CM_DIV_M2_DPLL_UNIPRO_OFFSET		0x00d0
 #define OMAP4430_CM_DIV_M2_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00d0)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_UNIPRO_OFFSET	0x00e8
 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00e8)
+#define OMAP4_CM_SSC_MODFREQDIV_DPLL_UNIPRO_OFFSET	0x00ec
 #define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ec)
 
 /* CM2.ALWAYS_ON_CM2 register offsets */
+#define OMAP4_CM_ALWON_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_ALWON_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0000)
+#define OMAP4_CM_ALWON_MDMINTC_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0020)
+#define OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0028)
+#define OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET		0x0030
 #define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0030)
+#define OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET		0x0038
 #define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0038)
 
 /* CM2.CORE_CM2 register offsets */
+#define OMAP4_CM_L3_1_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_L3_1_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0000)
+#define OMAP4_CM_L3_1_DYNAMICDEP_OFFSET			0x0008
 #define OMAP4430_CM_L3_1_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0008)
+#define OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_L3_1_L3_1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0020)
+#define OMAP4_CM_L3_2_CLKSTCTRL_OFFSET			0x0100
 #define OMAP4430_CM_L3_2_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0100)
+#define OMAP4_CM_L3_2_DYNAMICDEP_OFFSET			0x0108
 #define OMAP4430_CM_L3_2_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0108)
+#define OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET		0x0120
 #define OMAP4430_CM_L3_2_L3_2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0120)
+#define OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET		0x0128
 #define OMAP4430_CM_L3_2_GPMC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0128)
+#define OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET		0x0130
 #define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0130)
+#define OMAP4_CM_DUCATI_CLKSTCTRL_OFFSET		0x0200
 #define OMAP4430_CM_DUCATI_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0200)
+#define OMAP4_CM_DUCATI_STATICDEP_OFFSET		0x0204
 #define OMAP4430_CM_DUCATI_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0204)
+#define OMAP4_CM_DUCATI_DYNAMICDEP_OFFSET		0x0208
 #define OMAP4430_CM_DUCATI_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0208)
+#define OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET		0x0220
 #define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0220)
+#define OMAP4_CM_SDMA_CLKSTCTRL_OFFSET			0x0300
 #define OMAP4430_CM_SDMA_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0300)
+#define OMAP4_CM_SDMA_STATICDEP_OFFSET			0x0304
 #define OMAP4430_CM_SDMA_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0304)
+#define OMAP4_CM_SDMA_DYNAMICDEP_OFFSET			0x0308
 #define OMAP4430_CM_SDMA_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0308)
+#define OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET		0x0320
 #define OMAP4430_CM_SDMA_SDMA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0320)
+#define OMAP4_CM_MEMIF_CLKSTCTRL_OFFSET			0x0400
 #define OMAP4430_CM_MEMIF_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0400)
+#define OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET		0x0420
 #define OMAP4430_CM_MEMIF_DMM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0420)
+#define OMAP4_CM_MEMIF_EMIF_FW_CLKCTRL_OFFSET		0x0428
 #define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0428)
+#define OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET		0x0430
 #define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0430)
+#define OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET		0x0438
 #define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0438)
+#define OMAP4_CM_MEMIF_DLL_CLKCTRL_OFFSET		0x0440
 #define OMAP4430_CM_MEMIF_DLL_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0440)
+#define OMAP4_CM_MEMIF_EMIF_H1_CLKCTRL_OFFSET		0x0450
 #define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0450)
+#define OMAP4_CM_MEMIF_EMIF_H2_CLKCTRL_OFFSET		0x0458
 #define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0458)
+#define OMAP4_CM_MEMIF_DLL_H_CLKCTRL_OFFSET		0x0460
 #define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0460)
+#define OMAP4_CM_D2D_CLKSTCTRL_OFFSET			0x0500
 #define OMAP4430_CM_D2D_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0500)
+#define OMAP4_CM_D2D_STATICDEP_OFFSET			0x0504
 #define OMAP4430_CM_D2D_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0504)
+#define OMAP4_CM_D2D_DYNAMICDEP_OFFSET			0x0508
 #define OMAP4430_CM_D2D_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0508)
+#define OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET		0x0520
 #define OMAP4430_CM_D2D_SAD2D_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0520)
+#define OMAP4_CM_D2D_MODEM_ICR_CLKCTRL_OFFSET		0x0528
 #define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0528)
+#define OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET		0x0530
 #define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0530)
+#define OMAP4_CM_L4CFG_CLKSTCTRL_OFFSET			0x0600
 #define OMAP4430_CM_L4CFG_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0600)
+#define OMAP4_CM_L4CFG_DYNAMICDEP_OFFSET		0x0608
 #define OMAP4430_CM_L4CFG_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0608)
+#define OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET		0x0620
 #define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0620)
+#define OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET		0x0628
 #define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0628)
+#define OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET		0x0630
 #define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0630)
+#define OMAP4_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET		0x0638
 #define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0638)
+#define OMAP4_CM_L3INSTR_CLKSTCTRL_OFFSET		0x0700
 #define OMAP4430_CM_L3INSTR_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0700)
+#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET		0x0720
 #define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0720)
+#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET	0x0728
 #define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0728)
+#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET		0x0740
 #define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0740)
 
 /* CM2.IVAHD_CM2 register offsets */
+#define OMAP4_CM_IVAHD_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_IVAHD_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0000)
+#define OMAP4_CM_IVAHD_STATICDEP_OFFSET			0x0004
 #define OMAP4430_CM_IVAHD_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0004)
+#define OMAP4_CM_IVAHD_DYNAMICDEP_OFFSET		0x0008
 #define OMAP4430_CM_IVAHD_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0008)
+#define OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0020)
+#define OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_IVAHD_SL2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0028)
 
 /* CM2.CAM_CM2 register offsets */
+#define OMAP4_CM_CAM_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_CAM_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0000)
+#define OMAP4_CM_CAM_STATICDEP_OFFSET			0x0004
 #define OMAP4430_CM_CAM_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0004)
+#define OMAP4_CM_CAM_DYNAMICDEP_OFFSET			0x0008
 #define OMAP4430_CM_CAM_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0008)
+#define OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET			0x0020
 #define OMAP4430_CM_CAM_ISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0020)
+#define OMAP4_CM_CAM_FDIF_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_CAM_FDIF_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0028)
 
 /* CM2.DSS_CM2 register offsets */
+#define OMAP4_CM_DSS_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_DSS_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0000)
+#define OMAP4_CM_DSS_STATICDEP_OFFSET			0x0004
 #define OMAP4430_CM_DSS_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0004)
+#define OMAP4_CM_DSS_DYNAMICDEP_OFFSET			0x0008
 #define OMAP4430_CM_DSS_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0008)
+#define OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET			0x0020
 #define OMAP4430_CM_DSS_DSS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0020)
+#define OMAP4_CM_DSS_DEISS_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_DSS_DEISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0028)
 
 /* CM2.GFX_CM2 register offsets */
+#define OMAP4_CM_GFX_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_GFX_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0000)
+#define OMAP4_CM_GFX_STATICDEP_OFFSET			0x0004
 #define OMAP4430_CM_GFX_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0004)
+#define OMAP4_CM_GFX_DYNAMICDEP_OFFSET			0x0008
 #define OMAP4430_CM_GFX_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0008)
+#define OMAP4_CM_GFX_GFX_CLKCTRL_OFFSET			0x0020
 #define OMAP4430_CM_GFX_GFX_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0020)
 
 /* CM2.L3INIT_CM2 register offsets */
+#define OMAP4_CM_L3INIT_CLKSTCTRL_OFFSET		0x0000
 #define OMAP4430_CM_L3INIT_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0000)
+#define OMAP4_CM_L3INIT_STATICDEP_OFFSET		0x0004
 #define OMAP4430_CM_L3INIT_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0004)
+#define OMAP4_CM_L3INIT_DYNAMICDEP_OFFSET		0x0008
 #define OMAP4430_CM_L3INIT_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0008)
+#define OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_L3INIT_MMC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0028)
+#define OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET		0x0030
 #define OMAP4430_CM_L3INIT_MMC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0030)
+#define OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET		0x0038
 #define OMAP4430_CM_L3INIT_HSI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0038)
+#define OMAP4_CM_L3INIT_UNIPRO1_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0040)
+#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET		0x0058
 #define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0058)
+#define OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET		0x0060
 #define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0060)
+#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET		0x0068
 #define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0068)
+#define OMAP4_CM_L3INIT_P1500_CLKCTRL_OFFSET		0x0078
 #define OMAP4430_CM_L3INIT_P1500_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0078)
+#define OMAP4_CM_L3INIT_EMAC_CLKCTRL_OFFSET		0x0080
 #define OMAP4430_CM_L3INIT_EMAC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0080)
+#define OMAP4_CM_L3INIT_SATA_CLKCTRL_OFFSET		0x0088
 #define OMAP4430_CM_L3INIT_SATA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0088)
+#define OMAP4_CM_L3INIT_TPPSS_CLKCTRL_OFFSET		0x0090
 #define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0090)
+#define OMAP4_CM_L3INIT_PCIESS_CLKCTRL_OFFSET		0x0098
 #define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0098)
+#define OMAP4_CM_L3INIT_CCPTX_CLKCTRL_OFFSET		0x00a8
 #define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00a8)
+#define OMAP4_CM_L3INIT_XHPI_CLKCTRL_OFFSET		0x00c0
 #define OMAP4430_CM_L3INIT_XHPI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c0)
+#define OMAP4_CM_L3INIT_MMC6_CLKCTRL_OFFSET		0x00c8
 #define OMAP4430_CM_L3INIT_MMC6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c8)
+#define OMAP4_CM_L3INIT_USB_HOST_FS_CLKCTRL_OFFSET	0x00d0
 #define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00d0)
+#define OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET	0x00e0
 #define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00e0)
 
 /* CM2.L4PER_CM2 register offsets */
+#define OMAP4_CM_L4PER_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_L4PER_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0000)
+#define OMAP4_CM_L4PER_DYNAMICDEP_OFFSET		0x0008
 #define OMAP4430_CM_L4PER_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0008)
+#define OMAP4_CM_L4PER_ADC_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_L4PER_ADC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0020)
+#define OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0028)
+#define OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET		0x0030
 #define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0030)
+#define OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET		0x0038
 #define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0038)
+#define OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0040)
+#define OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET		0x0048
 #define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0048)
+#define OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET		0x0050
 #define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0050)
+#define OMAP4_CM_L4PER_ELM_CLKCTRL_OFFSET		0x0058
 #define OMAP4430_CM_L4PER_ELM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0058)
+#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET		0x0060
 #define OMAP4430_CM_L4PER_GPIO2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0060)
+#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET		0x0068
 #define OMAP4430_CM_L4PER_GPIO3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0068)
+#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET		0x0070
 #define OMAP4430_CM_L4PER_GPIO4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0070)
+#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET		0x0078
 #define OMAP4430_CM_L4PER_GPIO5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0078)
+#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET		0x0080
 #define OMAP4430_CM_L4PER_GPIO6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0080)
+#define OMAP4_CM_L4PER_HDQ1W_CLKCTRL_OFFSET		0x0088
 #define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0088)
+#define OMAP4_CM_L4PER_HECC1_CLKCTRL_OFFSET		0x0090
 #define OMAP4430_CM_L4PER_HECC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0090)
+#define OMAP4_CM_L4PER_HECC2_CLKCTRL_OFFSET		0x0098
 #define OMAP4430_CM_L4PER_HECC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0098)
+#define OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET		0x00a0
 #define OMAP4430_CM_L4PER_I2C1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a0)
+#define OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET		0x00a8
 #define OMAP4430_CM_L4PER_I2C2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a8)
+#define OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET		0x00b0
 #define OMAP4430_CM_L4PER_I2C3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b0)
+#define OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET		0x00b8
 #define OMAP4430_CM_L4PER_I2C4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b8)
+#define OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET		0x00c0
 #define OMAP4430_CM_L4PER_L4PER_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00c0)
+#define OMAP4_CM_L4PER_MCASP2_CLKCTRL_OFFSET		0x00d0
 #define OMAP4430_CM_L4PER_MCASP2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d0)
+#define OMAP4_CM_L4PER_MCASP3_CLKCTRL_OFFSET		0x00d8
 #define OMAP4430_CM_L4PER_MCASP3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d8)
+#define OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET		0x00e0
 #define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e0)
+#define OMAP4_CM_L4PER_MGATE_CLKCTRL_OFFSET		0x00e8
 #define OMAP4430_CM_L4PER_MGATE_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e8)
+#define OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET		0x00f0
 #define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f0)
+#define OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET		0x00f8
 #define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f8)
+#define OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET		0x0100
 #define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0100)
+#define OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET		0x0108
 #define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0108)
+#define OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET		0x0120
 #define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0120)
+#define OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET		0x0128
 #define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0128)
+#define OMAP4_CM_L4PER_MSPROHG_CLKCTRL_OFFSET		0x0130
 #define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0130)
+#define OMAP4_CM_L4PER_SLIMBUS2_CLKCTRL_OFFSET		0x0138
 #define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0138)
+#define OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET		0x0140
 #define OMAP4430_CM_L4PER_UART1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0140)
+#define OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET		0x0148
 #define OMAP4430_CM_L4PER_UART2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0148)
+#define OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET		0x0150
 #define OMAP4430_CM_L4PER_UART3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0150)
+#define OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET		0x0158
 #define OMAP4430_CM_L4PER_UART4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0158)
+#define OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET		0x0160
 #define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0160)
+#define OMAP4_CM_L4PER_I2C5_CLKCTRL_OFFSET		0x0168
 #define OMAP4430_CM_L4PER_I2C5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0168)
+#define OMAP4_CM_L4SEC_CLKSTCTRL_OFFSET			0x0180
 #define OMAP4430_CM_L4SEC_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0180)
+#define OMAP4_CM_L4SEC_STATICDEP_OFFSET			0x0184
 #define OMAP4430_CM_L4SEC_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0184)
+#define OMAP4_CM_L4SEC_DYNAMICDEP_OFFSET		0x0188
 #define OMAP4430_CM_L4SEC_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0188)
+#define OMAP4_CM_L4SEC_AES1_CLKCTRL_OFFSET		0x01a0
 #define OMAP4430_CM_L4SEC_AES1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a0)
+#define OMAP4_CM_L4SEC_AES2_CLKCTRL_OFFSET		0x01a8
 #define OMAP4430_CM_L4SEC_AES2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a8)
+#define OMAP4_CM_L4SEC_DES3DES_CLKCTRL_OFFSET		0x01b0
 #define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b0)
+#define OMAP4_CM_L4SEC_PKAEIP29_CLKCTRL_OFFSET		0x01b8
 #define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b8)
+#define OMAP4_CM_L4SEC_RNG_CLKCTRL_OFFSET		0x01c0
 #define OMAP4430_CM_L4SEC_RNG_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c0)
+#define OMAP4_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET		0x01c8
 #define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c8)
+#define OMAP4_CM_L4SEC_CRYPTODMA_CLKCTRL_OFFSET		0x01d8
 #define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01d8)
 
 /* CM2.CEFUSE_CM2 register offsets */
+#define OMAP4_CM_CEFUSE_CLKSTCTRL_OFFSET		0x0000
 #define OMAP4430_CM_CEFUSE_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0000)
+#define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0020)
-
-/* CM2.RESTORE_CM2 register offsets */
-#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0000)
-#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0004)
-#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0008)
-#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x000c)
-#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0010)
-#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0014)
-#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0018)
-#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x001c)
-#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0020)
-#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0024)
-#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0028)
-#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x002c)
-#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0030)
-#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0034)
-#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0038)
-#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x003c)
-#define OMAP4430_CM_SDMA_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0040)
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/cm4xxx.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/cm4xxx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/cm4xxx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/cm4xxx.c	2010-08-01 18:11:14.000000000 -0400
@@ -21,35 +21,41 @@
 
 #include <asm/atomic.h>
 
-#include "cm.h"
-
-/* XXX move this to cm.h */
-/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
-#define MAX_MODULE_READY_TIME			20000
-
-/*
- * OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK: isolates the IDLEST field in the
- * CM_CLKCTRL register.
- */
-#define OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK	(0x2 << 16)
+#include <plat/common.h>
 
-/*
- * OMAP4 prcm_mod u32 fields contain packed data: the CM ID in bit 16 and
- * the PRCM module offset address (from the CM module base) in bits 15-0.
- */
-#define OMAP4_PRCM_MOD_CM_ID_SHIFT		16
-#define OMAP4_PRCM_MOD_OFFS_MASK		0xffff
+#include "cm.h"
+#include "cm-regbits-44xx.h"
 
 /**
- * omap4_cm_wait_idlest_ready - wait for a module to leave idle or standby
- * @prcm_mod: PRCM module offset (XXX example)
- * @prcm_dev_offs: PRCM device offset (e.g. MCASP XXX example)
+ * omap4_cm_wait_module_ready - wait for a module to be in 'func' state
+ * @clkctrl_reg: CLKCTRL module address
  *
- * XXX document
+ * Wait for the module IDLEST to be functional. If the idle state is in any
+ * the non functional state (trans, idle or disabled), module and thus the
+ * sysconfig cannot be accessed and will probably lead to an "imprecise
+ * external abort"
+ *
+ * Module idle state:
+ *   0x0 func:     Module is fully functional, including OCP
+ *   0x1 trans:    Module is performing transition: wakeup, or sleep, or sleep
+ *                 abortion
+ *   0x2 idle:     Module is in Idle mode (only OCP part). It is functional if
+ *                 using separate functional clock
+ *   0x3 disabled: Module is disabled and cannot be accessed
+ *
+ * TODO: Need to handle module accessible in idle state
  */
-int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
+int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg)
 {
-	/* FIXME: Add clock manager related code */
-	return 0;
+	int i = 0;
+
+	if (!clkctrl_reg)
+		return 0;
+
+	omap_test_timeout(((__raw_readl(clkctrl_reg) &
+			    OMAP4430_IDLEST_MASK) == 0),
+			  MAX_MODULE_READY_TIME, i);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/cm.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/cm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/cm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/cm.c	2010-08-01 18:11:14.000000000 -0400
@@ -27,9 +27,6 @@
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
-/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
-#define MAX_MODULE_READY_TIME		20000
-
 static const u8 cm_idlest_offs[] = {
 	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
 };
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/cm.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/cm.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/cm.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/cm.h	2010-08-01 18:11:14.000000000 -0400
@@ -112,7 +112,7 @@
 
 extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
 				      u8 idlest_shift);
-extern int omap4_cm_wait_module_ready(u32 prcm_mod, u8 prcm_dev_offs);
+extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
 
 static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
 {
@@ -134,13 +134,23 @@
 
 /* CM_ICLKEN_GFX */
 #define OMAP_EN_GFX_SHIFT				0
-#define OMAP_EN_GFX					(1 << 0)
+#define OMAP_EN_GFX_MASK				(1 << 0)
 
 /* CM_IDLEST_GFX */
-#define OMAP_ST_GFX					(1 << 0)
+#define OMAP_ST_GFX_MASK				(1 << 0)
+
 
 /* CM_IDLEST indicator */
 #define OMAP24XX_CM_IDLEST_VAL		0
 #define OMAP34XX_CM_IDLEST_VAL		1
 
+/*
+ * MAX_MODULE_READY_TIME: max duration in microseconds to wait for the
+ * PRCM to request that a module exit the inactive state in the case of
+ * OMAP2 & 3.
+ * In the case of OMAP4 this is the max duration in microseconds for the
+ * module to reach the functionnal state from an inactive state.
+ */
+#define MAX_MODULE_READY_TIME		2000
+
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/cm-regbits-24xx.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/cm-regbits-24xx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/cm-regbits-24xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/cm-regbits-24xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -20,43 +20,43 @@
 
 /* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
 #define OMAP24XX_EN_CAM_SHIFT				31
-#define OMAP24XX_EN_CAM					(1 << 31)
+#define OMAP24XX_EN_CAM_MASK				(1 << 31)
 #define OMAP24XX_EN_WDT4_SHIFT				29
-#define OMAP24XX_EN_WDT4				(1 << 29)
+#define OMAP24XX_EN_WDT4_MASK				(1 << 29)
 #define OMAP2420_EN_WDT3_SHIFT				28
-#define OMAP2420_EN_WDT3				(1 << 28)
+#define OMAP2420_EN_WDT3_MASK				(1 << 28)
 #define OMAP24XX_EN_MSPRO_SHIFT				27
-#define OMAP24XX_EN_MSPRO				(1 << 27)
+#define OMAP24XX_EN_MSPRO_MASK				(1 << 27)
 #define OMAP24XX_EN_FAC_SHIFT				25
-#define OMAP24XX_EN_FAC					(1 << 25)
+#define OMAP24XX_EN_FAC_MASK				(1 << 25)
 #define OMAP2420_EN_EAC_SHIFT				24
-#define OMAP2420_EN_EAC					(1 << 24)
+#define OMAP2420_EN_EAC_MASK				(1 << 24)
 #define OMAP24XX_EN_HDQ_SHIFT				23
-#define OMAP24XX_EN_HDQ					(1 << 23)
+#define OMAP24XX_EN_HDQ_MASK				(1 << 23)
 #define OMAP2420_EN_I2C2_SHIFT				20
-#define OMAP2420_EN_I2C2				(1 << 20)
+#define OMAP2420_EN_I2C2_MASK				(1 << 20)
 #define OMAP2420_EN_I2C1_SHIFT				19
-#define OMAP2420_EN_I2C1				(1 << 19)
+#define OMAP2420_EN_I2C1_MASK				(1 << 19)
 
 /* CM_FCLKEN2_CORE and CM_ICLKEN2_CORE shared bits */
 #define OMAP2430_EN_MCBSP5_SHIFT			5
-#define OMAP2430_EN_MCBSP5				(1 << 5)
+#define OMAP2430_EN_MCBSP5_MASK				(1 << 5)
 #define OMAP2430_EN_MCBSP4_SHIFT			4
-#define OMAP2430_EN_MCBSP4				(1 << 4)
+#define OMAP2430_EN_MCBSP4_MASK				(1 << 4)
 #define OMAP2430_EN_MCBSP3_SHIFT			3
-#define OMAP2430_EN_MCBSP3				(1 << 3)
+#define OMAP2430_EN_MCBSP3_MASK				(1 << 3)
 #define OMAP24XX_EN_SSI_SHIFT				1
-#define OMAP24XX_EN_SSI					(1 << 1)
+#define OMAP24XX_EN_SSI_MASK				(1 << 1)
 
 /* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
 #define OMAP24XX_EN_MPU_WDT_SHIFT			3
-#define OMAP24XX_EN_MPU_WDT				(1 << 3)
+#define OMAP24XX_EN_MPU_WDT_MASK			(1 << 3)
 
 /* Bits specific to each register */
 
 /* CM_IDLEST_MPU */
 /* 2430 only */
-#define OMAP2430_ST_MPU					(1 << 0)
+#define OMAP2430_ST_MPU_MASK				(1 << 0)
 
 /* CM_CLKSEL_MPU */
 #define OMAP24XX_CLKSEL_MPU_SHIFT			0
@@ -68,46 +68,46 @@
 
 /* CM_FCLKEN1_CORE specific bits*/
 #define OMAP24XX_EN_TV_SHIFT				2
-#define OMAP24XX_EN_TV					(1 << 2)
+#define OMAP24XX_EN_TV_MASK				(1 << 2)
 #define OMAP24XX_EN_DSS2_SHIFT				1
-#define OMAP24XX_EN_DSS2				(1 << 1)
+#define OMAP24XX_EN_DSS2_MASK				(1 << 1)
 #define OMAP24XX_EN_DSS1_SHIFT				0
-#define OMAP24XX_EN_DSS1				(1 << 0)
+#define OMAP24XX_EN_DSS1_MASK				(1 << 0)
 
 /* CM_FCLKEN2_CORE specific bits */
 #define OMAP2430_EN_I2CHS2_SHIFT			20
-#define OMAP2430_EN_I2CHS2				(1 << 20)
+#define OMAP2430_EN_I2CHS2_MASK				(1 << 20)
 #define OMAP2430_EN_I2CHS1_SHIFT			19
-#define OMAP2430_EN_I2CHS1				(1 << 19)
+#define OMAP2430_EN_I2CHS1_MASK				(1 << 19)
 #define OMAP2430_EN_MMCHSDB2_SHIFT			17
-#define OMAP2430_EN_MMCHSDB2				(1 << 17)
+#define OMAP2430_EN_MMCHSDB2_MASK			(1 << 17)
 #define OMAP2430_EN_MMCHSDB1_SHIFT			16
-#define OMAP2430_EN_MMCHSDB1				(1 << 16)
+#define OMAP2430_EN_MMCHSDB1_MASK			(1 << 16)
 
 /* CM_ICLKEN1_CORE specific bits */
 #define OMAP24XX_EN_MAILBOXES_SHIFT			30
-#define OMAP24XX_EN_MAILBOXES				(1 << 30)
+#define OMAP24XX_EN_MAILBOXES_MASK			(1 << 30)
 #define OMAP24XX_EN_DSS_SHIFT				0
-#define OMAP24XX_EN_DSS					(1 << 0)
+#define OMAP24XX_EN_DSS_MASK				(1 << 0)
 
 /* CM_ICLKEN2_CORE specific bits */
 
 /* CM_ICLKEN3_CORE */
 /* 2430 only */
 #define OMAP2430_EN_SDRC_SHIFT				2
-#define OMAP2430_EN_SDRC				(1 << 2)
+#define OMAP2430_EN_SDRC_MASK				(1 << 2)
 
 /* CM_ICLKEN4_CORE */
 #define OMAP24XX_EN_PKA_SHIFT				4
-#define OMAP24XX_EN_PKA					(1 << 4)
+#define OMAP24XX_EN_PKA_MASK				(1 << 4)
 #define OMAP24XX_EN_AES_SHIFT				3
-#define OMAP24XX_EN_AES					(1 << 3)
+#define OMAP24XX_EN_AES_MASK				(1 << 3)
 #define OMAP24XX_EN_RNG_SHIFT				2
-#define OMAP24XX_EN_RNG					(1 << 2)
+#define OMAP24XX_EN_RNG_MASK				(1 << 2)
 #define OMAP24XX_EN_SHA_SHIFT				1
-#define OMAP24XX_EN_SHA					(1 << 1)
+#define OMAP24XX_EN_SHA_MASK				(1 << 1)
 #define OMAP24XX_EN_DES_SHIFT				0
-#define OMAP24XX_EN_DES					(1 << 0)
+#define OMAP24XX_EN_DES_MASK				(1 << 0)
 
 /* CM_IDLEST1_CORE specific bits */
 #define OMAP24XX_ST_MAILBOXES_SHIFT			30
@@ -138,9 +138,9 @@
 /* CM_IDLEST2_CORE */
 #define OMAP2430_ST_MCBSP5_SHIFT			5
 #define OMAP2430_ST_MCBSP5_MASK				(1 << 5)
-#define OMAP2430_ST_MCBSP4_SHIFT				4
+#define OMAP2430_ST_MCBSP4_SHIFT			4
 #define OMAP2430_ST_MCBSP4_MASK				(1 << 4)
-#define OMAP2430_ST_MCBSP3_SHIFT				3
+#define OMAP2430_ST_MCBSP3_SHIFT			3
 #define OMAP2430_ST_MCBSP3_MASK				(1 << 3)
 #define OMAP24XX_ST_SSI_SHIFT				1
 #define OMAP24XX_ST_SSI_MASK				(1 << 1)
@@ -162,62 +162,62 @@
 #define OMAP24XX_ST_DES_MASK				(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
-#define OMAP24XX_AUTO_CAM				(1 << 31)
-#define OMAP24XX_AUTO_MAILBOXES				(1 << 30)
-#define OMAP24XX_AUTO_WDT4				(1 << 29)
-#define OMAP2420_AUTO_WDT3				(1 << 28)
-#define OMAP24XX_AUTO_MSPRO				(1 << 27)
-#define OMAP2420_AUTO_MMC				(1 << 26)
-#define OMAP24XX_AUTO_FAC				(1 << 25)
-#define OMAP2420_AUTO_EAC				(1 << 24)
-#define OMAP24XX_AUTO_HDQ				(1 << 23)
-#define OMAP24XX_AUTO_UART2				(1 << 22)
-#define OMAP24XX_AUTO_UART1				(1 << 21)
-#define OMAP24XX_AUTO_I2C2				(1 << 20)
-#define OMAP24XX_AUTO_I2C1				(1 << 19)
-#define OMAP24XX_AUTO_MCSPI2				(1 << 18)
-#define OMAP24XX_AUTO_MCSPI1				(1 << 17)
-#define OMAP24XX_AUTO_MCBSP2				(1 << 16)
-#define OMAP24XX_AUTO_MCBSP1				(1 << 15)
-#define OMAP24XX_AUTO_GPT12				(1 << 14)
-#define OMAP24XX_AUTO_GPT11				(1 << 13)
-#define OMAP24XX_AUTO_GPT10				(1 << 12)
-#define OMAP24XX_AUTO_GPT9				(1 << 11)
-#define OMAP24XX_AUTO_GPT8				(1 << 10)
-#define OMAP24XX_AUTO_GPT7				(1 << 9)
-#define OMAP24XX_AUTO_GPT6				(1 << 8)
-#define OMAP24XX_AUTO_GPT5				(1 << 7)
-#define OMAP24XX_AUTO_GPT4				(1 << 6)
-#define OMAP24XX_AUTO_GPT3				(1 << 5)
-#define OMAP24XX_AUTO_GPT2				(1 << 4)
-#define OMAP2420_AUTO_VLYNQ				(1 << 3)
-#define OMAP24XX_AUTO_DSS				(1 << 0)
+#define OMAP24XX_AUTO_CAM_MASK				(1 << 31)
+#define OMAP24XX_AUTO_MAILBOXES_MASK			(1 << 30)
+#define OMAP24XX_AUTO_WDT4_MASK				(1 << 29)
+#define OMAP2420_AUTO_WDT3_MASK				(1 << 28)
+#define OMAP24XX_AUTO_MSPRO_MASK			(1 << 27)
+#define OMAP2420_AUTO_MMC_MASK				(1 << 26)
+#define OMAP24XX_AUTO_FAC_MASK				(1 << 25)
+#define OMAP2420_AUTO_EAC_MASK				(1 << 24)
+#define OMAP24XX_AUTO_HDQ_MASK				(1 << 23)
+#define OMAP24XX_AUTO_UART2_MASK			(1 << 22)
+#define OMAP24XX_AUTO_UART1_MASK			(1 << 21)
+#define OMAP24XX_AUTO_I2C2_MASK				(1 << 20)
+#define OMAP24XX_AUTO_I2C1_MASK				(1 << 19)
+#define OMAP24XX_AUTO_MCSPI2_MASK			(1 << 18)
+#define OMAP24XX_AUTO_MCSPI1_MASK			(1 << 17)
+#define OMAP24XX_AUTO_MCBSP2_MASK			(1 << 16)
+#define OMAP24XX_AUTO_MCBSP1_MASK			(1 << 15)
+#define OMAP24XX_AUTO_GPT12_MASK			(1 << 14)
+#define OMAP24XX_AUTO_GPT11_MASK			(1 << 13)
+#define OMAP24XX_AUTO_GPT10_MASK			(1 << 12)
+#define OMAP24XX_AUTO_GPT9_MASK				(1 << 11)
+#define OMAP24XX_AUTO_GPT8_MASK				(1 << 10)
+#define OMAP24XX_AUTO_GPT7_MASK				(1 << 9)
+#define OMAP24XX_AUTO_GPT6_MASK				(1 << 8)
+#define OMAP24XX_AUTO_GPT5_MASK				(1 << 7)
+#define OMAP24XX_AUTO_GPT4_MASK				(1 << 6)
+#define OMAP24XX_AUTO_GPT3_MASK				(1 << 5)
+#define OMAP24XX_AUTO_GPT2_MASK				(1 << 4)
+#define OMAP2420_AUTO_VLYNQ_MASK			(1 << 3)
+#define OMAP24XX_AUTO_DSS_MASK				(1 << 0)
 
 /* CM_AUTOIDLE2_CORE */
-#define OMAP2430_AUTO_MDM_INTC				(1 << 11)
-#define OMAP2430_AUTO_GPIO5				(1 << 10)
-#define OMAP2430_AUTO_MCSPI3				(1 << 9)
-#define OMAP2430_AUTO_MMCHS2				(1 << 8)
-#define OMAP2430_AUTO_MMCHS1				(1 << 7)
-#define OMAP2430_AUTO_USBHS				(1 << 6)
-#define OMAP2430_AUTO_MCBSP5				(1 << 5)
-#define OMAP2430_AUTO_MCBSP4				(1 << 4)
-#define OMAP2430_AUTO_MCBSP3				(1 << 3)
-#define OMAP24XX_AUTO_UART3				(1 << 2)
-#define OMAP24XX_AUTO_SSI				(1 << 1)
-#define OMAP24XX_AUTO_USB				(1 << 0)
+#define OMAP2430_AUTO_MDM_INTC_MASK			(1 << 11)
+#define OMAP2430_AUTO_GPIO5_MASK			(1 << 10)
+#define OMAP2430_AUTO_MCSPI3_MASK			(1 << 9)
+#define OMAP2430_AUTO_MMCHS2_MASK			(1 << 8)
+#define OMAP2430_AUTO_MMCHS1_MASK			(1 << 7)
+#define OMAP2430_AUTO_USBHS_MASK			(1 << 6)
+#define OMAP2430_AUTO_MCBSP5_MASK			(1 << 5)
+#define OMAP2430_AUTO_MCBSP4_MASK			(1 << 4)
+#define OMAP2430_AUTO_MCBSP3_MASK			(1 << 3)
+#define OMAP24XX_AUTO_UART3_MASK			(1 << 2)
+#define OMAP24XX_AUTO_SSI_MASK				(1 << 1)
+#define OMAP24XX_AUTO_USB_MASK				(1 << 0)
 
 /* CM_AUTOIDLE3_CORE */
-#define OMAP24XX_AUTO_SDRC				(1 << 2)
-#define OMAP24XX_AUTO_GPMC				(1 << 1)
-#define OMAP24XX_AUTO_SDMA				(1 << 0)
+#define OMAP24XX_AUTO_SDRC_MASK				(1 << 2)
+#define OMAP24XX_AUTO_GPMC_MASK				(1 << 1)
+#define OMAP24XX_AUTO_SDMA_MASK				(1 << 0)
 
 /* CM_AUTOIDLE4_CORE */
-#define OMAP24XX_AUTO_PKA				(1 << 4)
-#define OMAP24XX_AUTO_AES				(1 << 3)
-#define OMAP24XX_AUTO_RNG				(1 << 2)
-#define OMAP24XX_AUTO_SHA				(1 << 1)
-#define OMAP24XX_AUTO_DES				(1 << 0)
+#define OMAP24XX_AUTO_PKA_MASK				(1 << 4)
+#define OMAP24XX_AUTO_AES_MASK				(1 << 3)
+#define OMAP24XX_AUTO_RNG_MASK				(1 << 2)
+#define OMAP24XX_AUTO_SHA_MASK				(1 << 1)
+#define OMAP24XX_AUTO_DES_MASK				(1 << 0)
 
 /* CM_CLKSEL1_CORE */
 #define OMAP24XX_CLKSEL_USB_SHIFT			25
@@ -269,9 +269,9 @@
 
 /* CM_FCLKEN_GFX */
 #define OMAP24XX_EN_3D_SHIFT				2
-#define OMAP24XX_EN_3D					(1 << 2)
+#define OMAP24XX_EN_3D_MASK				(1 << 2)
 #define OMAP24XX_EN_2D_SHIFT				1
-#define OMAP24XX_EN_2D					(1 << 1)
+#define OMAP24XX_EN_2D_MASK				(1 << 1)
 
 /* CM_ICLKEN_GFX specific bits */
 
@@ -287,13 +287,13 @@
 
 /* CM_ICLKEN_WKUP specific bits */
 #define OMAP2430_EN_ICR_SHIFT				6
-#define OMAP2430_EN_ICR					(1 << 6)
+#define OMAP2430_EN_ICR_MASK				(1 << 6)
 #define OMAP24XX_EN_OMAPCTRL_SHIFT			5
-#define OMAP24XX_EN_OMAPCTRL				(1 << 5)
+#define OMAP24XX_EN_OMAPCTRL_MASK			(1 << 5)
 #define OMAP24XX_EN_WDT1_SHIFT				4
-#define OMAP24XX_EN_WDT1				(1 << 4)
+#define OMAP24XX_EN_WDT1_MASK				(1 << 4)
 #define OMAP24XX_EN_32KSYNC_SHIFT			1
-#define OMAP24XX_EN_32KSYNC				(1 << 1)
+#define OMAP24XX_EN_32KSYNC_MASK			(1 << 1)
 
 /* CM_IDLEST_WKUP specific bits */
 #define OMAP2430_ST_ICR_SHIFT				6
@@ -308,12 +308,12 @@
 #define OMAP24XX_ST_32KSYNC_MASK			(1 << 1)
 
 /* CM_AUTOIDLE_WKUP */
-#define OMAP24XX_AUTO_OMAPCTRL				(1 << 5)
-#define OMAP24XX_AUTO_WDT1				(1 << 4)
-#define OMAP24XX_AUTO_MPU_WDT				(1 << 3)
-#define OMAP24XX_AUTO_GPIOS				(1 << 2)
-#define OMAP24XX_AUTO_32KSYNC				(1 << 1)
-#define OMAP24XX_AUTO_GPT1				(1 << 0)
+#define OMAP24XX_AUTO_OMAPCTRL_MASK			(1 << 5)
+#define OMAP24XX_AUTO_WDT1_MASK				(1 << 4)
+#define OMAP24XX_AUTO_MPU_WDT_MASK			(1 << 3)
+#define OMAP24XX_AUTO_GPIOS_MASK			(1 << 2)
+#define OMAP24XX_AUTO_32KSYNC_MASK			(1 << 1)
+#define OMAP24XX_AUTO_GPT1_MASK				(1 << 0)
 
 /* CM_CLKSEL_WKUP */
 #define OMAP24XX_CLKSEL_GPT1_SHIFT			0
@@ -328,12 +328,12 @@
 #define OMAP24XX_EN_DPLL_MASK				(0x3 << 0)
 
 /* CM_IDLEST_CKGEN */
-#define OMAP24XX_ST_54M_APLL				(1 << 9)
-#define OMAP24XX_ST_96M_APLL				(1 << 8)
-#define OMAP24XX_ST_54M_CLK				(1 << 6)
-#define OMAP24XX_ST_12M_CLK				(1 << 5)
-#define OMAP24XX_ST_48M_CLK				(1 << 4)
-#define OMAP24XX_ST_96M_CLK				(1 << 2)
+#define OMAP24XX_ST_54M_APLL_MASK			(1 << 9)
+#define OMAP24XX_ST_96M_APLL_MASK			(1 << 8)
+#define OMAP24XX_ST_54M_CLK_MASK			(1 << 6)
+#define OMAP24XX_ST_12M_CLK_MASK			(1 << 5)
+#define OMAP24XX_ST_48M_CLK_MASK			(1 << 4)
+#define OMAP24XX_ST_96M_CLK_MASK			(1 << 2)
 #define OMAP24XX_ST_CORE_CLK_SHIFT			0
 #define OMAP24XX_ST_CORE_CLK_MASK			(0x3 << 0)
 
@@ -355,11 +355,11 @@
 #define OMAP24XX_DPLL_DIV_SHIFT				8
 #define OMAP24XX_DPLL_DIV_MASK				(0xf << 8)
 #define OMAP24XX_54M_SOURCE_SHIFT			5
-#define OMAP24XX_54M_SOURCE				(1 << 5)
+#define OMAP24XX_54M_SOURCE_MASK			(1 << 5)
 #define OMAP2430_96M_SOURCE_SHIFT			4
-#define OMAP2430_96M_SOURCE				(1 << 4)
+#define OMAP2430_96M_SOURCE_MASK			(1 << 4)
 #define OMAP24XX_48M_SOURCE_SHIFT			3
-#define OMAP24XX_48M_SOURCE				(1 << 3)
+#define OMAP24XX_48M_SOURCE_MASK			(1 << 3)
 #define OMAP2430_ALTCLK_SOURCE_SHIFT			0
 #define OMAP2430_ALTCLK_SOURCE_MASK			(0x7 << 0)
 
@@ -369,29 +369,29 @@
 
 /* CM_FCLKEN_DSP */
 #define OMAP2420_EN_IVA_COP_SHIFT			10
-#define OMAP2420_EN_IVA_COP				(1 << 10)
+#define OMAP2420_EN_IVA_COP_MASK			(1 << 10)
 #define OMAP2420_EN_IVA_MPU_SHIFT			8
-#define OMAP2420_EN_IVA_MPU				(1 << 8)
+#define OMAP2420_EN_IVA_MPU_MASK			(1 << 8)
 #define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT		0
-#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP			(1 << 0)
+#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_MASK		(1 << 0)
 
 /* CM_ICLKEN_DSP */
 #define OMAP2420_EN_DSP_IPI_SHIFT			1
-#define OMAP2420_EN_DSP_IPI				(1 << 1)
+#define OMAP2420_EN_DSP_IPI_MASK			(1 << 1)
 
 /* CM_IDLEST_DSP */
-#define OMAP2420_ST_IVA					(1 << 8)
-#define OMAP2420_ST_IPI					(1 << 1)
-#define OMAP24XX_ST_DSP					(1 << 0)
+#define OMAP2420_ST_IVA_MASK				(1 << 8)
+#define OMAP2420_ST_IPI_MASK				(1 << 1)
+#define OMAP24XX_ST_DSP_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_DSP */
-#define OMAP2420_AUTO_DSP_IPI				(1 << 1)
+#define OMAP2420_AUTO_DSP_IPI_MASK			(1 << 1)
 
 /* CM_CLKSEL_DSP */
-#define OMAP2420_SYNC_IVA				(1 << 13)
+#define OMAP2420_SYNC_IVA_MASK				(1 << 13)
 #define OMAP2420_CLKSEL_IVA_SHIFT			8
 #define OMAP2420_CLKSEL_IVA_MASK			(0x1f << 8)
-#define OMAP24XX_SYNC_DSP				(1 << 7)
+#define OMAP24XX_SYNC_DSP_MASK				(1 << 7)
 #define OMAP24XX_CLKSEL_DSP_IF_SHIFT			5
 #define OMAP24XX_CLKSEL_DSP_IF_MASK			(0x3 << 5)
 #define OMAP24XX_CLKSEL_DSP_SHIFT			0
@@ -406,24 +406,24 @@
 /* CM_FCLKEN_MDM */
 /* 2430 only */
 #define OMAP2430_EN_OSC_SHIFT				1
-#define OMAP2430_EN_OSC					(1 << 1)
+#define OMAP2430_EN_OSC_MASK				(1 << 1)
 
 /* CM_ICLKEN_MDM */
 /* 2430 only */
 #define OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT		0
-#define OMAP2430_CM_ICLKEN_MDM_EN_MDM			(1 << 0)
+#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_MASK		(1 << 0)
 
 /* CM_IDLEST_MDM specific bits */
 /* 2430 only */
 
 /* CM_AUTOIDLE_MDM */
 /* 2430 only */
-#define OMAP2430_AUTO_OSC				(1 << 1)
-#define OMAP2430_AUTO_MDM				(1 << 0)
+#define OMAP2430_AUTO_OSC_MASK				(1 << 1)
+#define OMAP2430_AUTO_MDM_MASK				(1 << 0)
 
 /* CM_CLKSEL_MDM */
 /* 2430 only */
-#define OMAP2430_SYNC_MDM				(1 << 4)
+#define OMAP2430_SYNC_MDM_MASK				(1 << 4)
 #define OMAP2430_CLKSEL_MDM_SHIFT			0
 #define OMAP2430_CLKSEL_MDM_MASK			(0xf << 0)
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/cm-regbits-34xx.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/cm-regbits-34xx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/cm-regbits-34xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/cm-regbits-34xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -21,15 +21,15 @@
 /* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
 #define OMAP3430ES2_EN_MMC3_MASK			(1 << 30)
 #define OMAP3430ES2_EN_MMC3_SHIFT			30
-#define OMAP3430_EN_MSPRO				(1 << 23)
+#define OMAP3430_EN_MSPRO_MASK				(1 << 23)
 #define OMAP3430_EN_MSPRO_SHIFT				23
-#define OMAP3430_EN_HDQ					(1 << 22)
+#define OMAP3430_EN_HDQ_MASK				(1 << 22)
 #define OMAP3430_EN_HDQ_SHIFT				22
-#define OMAP3430ES1_EN_FSHOSTUSB			(1 << 5)
+#define OMAP3430ES1_EN_FSHOSTUSB_MASK			(1 << 5)
 #define OMAP3430ES1_EN_FSHOSTUSB_SHIFT			5
-#define OMAP3430ES1_EN_D2D				(1 << 3)
+#define OMAP3430ES1_EN_D2D_MASK				(1 << 3)
 #define OMAP3430ES1_EN_D2D_SHIFT			3
-#define OMAP3430_EN_SSI					(1 << 0)
+#define OMAP3430_EN_SSI_MASK				(1 << 0)
 #define OMAP3430_EN_SSI_SHIFT				0
 
 /* CM_FCLKEN3_CORE and CM_ICLKEN3_CORE shared bits */
@@ -37,19 +37,19 @@
 #define OMAP3430ES2_EN_USBTLL_MASK			(1 << 2)
 
 /* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
-#define OMAP3430_EN_WDT2				(1 << 5)
+#define OMAP3430_EN_WDT2_MASK				(1 << 5)
 #define OMAP3430_EN_WDT2_SHIFT				5
 
 /* CM_ICLKEN_CAM, CM_FCLKEN_CAM shared bits */
-#define OMAP3430_EN_CAM					(1 << 0)
+#define OMAP3430_EN_CAM_MASK				(1 << 0)
 #define OMAP3430_EN_CAM_SHIFT				0
 
 /* CM_FCLKEN_PER, CM_ICLKEN_PER shared bits */
-#define OMAP3430_EN_WDT3				(1 << 12)
+#define OMAP3430_EN_WDT3_MASK				(1 << 12)
 #define OMAP3430_EN_WDT3_SHIFT				12
 
 /* CM_CLKSEL2_EMU, CM_CLKSEL3_EMU shared bits */
-#define OMAP3430_OVERRIDE_ENABLE			(1 << 19)
+#define OMAP3430_OVERRIDE_ENABLE_MASK			(1 << 19)
 
 
 /* Bits specific to each register */
@@ -69,7 +69,7 @@
 #define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
 
 /* CM_IDLEST_IVA2 */
-#define OMAP3430_ST_IVA2				(1 << 0)
+#define OMAP3430_ST_IVA2_MASK				(1 << 0)
 
 /* CM_IDLEST_PLL_IVA2 */
 #define OMAP3430_ST_IVA2_CLK_SHIFT			0
@@ -114,7 +114,7 @@
 #define OMAP3430_EN_MPU_DPLL_MASK			(0x7 << 0)
 
 /* CM_IDLEST_MPU */
-#define OMAP3430_ST_MPU					(1 << 0)
+#define OMAP3430_ST_MPU_MASK				(1 << 0)
 
 /* CM_IDLEST_PLL_MPU */
 #define OMAP3430_ST_MPU_CLK_SHIFT			0
@@ -145,50 +145,50 @@
 #define OMAP3430_CLKACTIVITY_MPU_MASK			(1 << 0)
 
 /* CM_FCLKEN1_CORE specific bits */
-#define OMAP3430_EN_MODEM				(1 << 31)
+#define OMAP3430_EN_MODEM_MASK				(1 << 31)
 #define OMAP3430_EN_MODEM_SHIFT				31
 
 /* CM_ICLKEN1_CORE specific bits */
-#define OMAP3430_EN_ICR					(1 << 29)
+#define OMAP3430_EN_ICR_MASK				(1 << 29)
 #define OMAP3430_EN_ICR_SHIFT				29
-#define OMAP3430_EN_AES2				(1 << 28)
+#define OMAP3430_EN_AES2_MASK				(1 << 28)
 #define OMAP3430_EN_AES2_SHIFT				28
-#define OMAP3430_EN_SHA12				(1 << 27)
+#define OMAP3430_EN_SHA12_MASK				(1 << 27)
 #define OMAP3430_EN_SHA12_SHIFT				27
-#define OMAP3430_EN_DES2				(1 << 26)
+#define OMAP3430_EN_DES2_MASK				(1 << 26)
 #define OMAP3430_EN_DES2_SHIFT				26
-#define OMAP3430ES1_EN_FAC				(1 << 8)
+#define OMAP3430ES1_EN_FAC_MASK				(1 << 8)
 #define OMAP3430ES1_EN_FAC_SHIFT			8
-#define OMAP3430_EN_MAILBOXES				(1 << 7)
+#define OMAP3430_EN_MAILBOXES_MASK			(1 << 7)
 #define OMAP3430_EN_MAILBOXES_SHIFT			7
-#define OMAP3430_EN_OMAPCTRL				(1 << 6)
+#define OMAP3430_EN_OMAPCTRL_MASK			(1 << 6)
 #define OMAP3430_EN_OMAPCTRL_SHIFT			6
-#define OMAP3430_EN_SAD2D				(1 << 3)
+#define OMAP3430_EN_SAD2D_MASK				(1 << 3)
 #define OMAP3430_EN_SAD2D_SHIFT				3
-#define OMAP3430_EN_SDRC				(1 << 1)
+#define OMAP3430_EN_SDRC_MASK				(1 << 1)
 #define OMAP3430_EN_SDRC_SHIFT				1
 
 /* AM35XX specific CM_ICLKEN1_CORE bits */
 #define AM35XX_EN_IPSS_MASK				(1 << 4)
 #define AM35XX_EN_IPSS_SHIFT				4
-#define AM35XX_EN_UART4_MASK			(1 << 23)
+#define AM35XX_EN_UART4_MASK				(1 << 23)
 #define AM35XX_EN_UART4_SHIFT				23
 
 /* CM_ICLKEN2_CORE */
-#define OMAP3430_EN_PKA					(1 << 4)
+#define OMAP3430_EN_PKA_MASK				(1 << 4)
 #define OMAP3430_EN_PKA_SHIFT				4
-#define OMAP3430_EN_AES1				(1 << 3)
+#define OMAP3430_EN_AES1_MASK				(1 << 3)
 #define OMAP3430_EN_AES1_SHIFT				3
-#define OMAP3430_EN_RNG					(1 << 2)
+#define OMAP3430_EN_RNG_MASK				(1 << 2)
 #define OMAP3430_EN_RNG_SHIFT				2
-#define OMAP3430_EN_SHA11				(1 << 1)
+#define OMAP3430_EN_SHA11_MASK				(1 << 1)
 #define OMAP3430_EN_SHA11_SHIFT				1
-#define OMAP3430_EN_DES1				(1 << 0)
+#define OMAP3430_EN_DES1_MASK				(1 << 0)
 #define OMAP3430_EN_DES1_SHIFT				0
 
 /* CM_ICLKEN3_CORE */
 #define OMAP3430_EN_MAD2D_SHIFT				3
-#define OMAP3430_EN_MAD2D				(1 << 3)
+#define OMAP3430_EN_MAD2D_MASK				(1 << 3)
 
 /* CM_FCLKEN3_CORE specific bits */
 #define OMAP3430ES2_EN_TS_SHIFT				1
@@ -249,79 +249,79 @@
 #define OMAP3430ES2_ST_CPEFUSE_MASK			(1 << 0)
 
 /* CM_AUTOIDLE1_CORE */
-#define OMAP3430_AUTO_MODEM				(1 << 31)
+#define OMAP3430_AUTO_MODEM_MASK			(1 << 31)
 #define OMAP3430_AUTO_MODEM_SHIFT			31
-#define OMAP3430ES2_AUTO_MMC3				(1 << 30)
+#define OMAP3430ES2_AUTO_MMC3_MASK			(1 << 30)
 #define OMAP3430ES2_AUTO_MMC3_SHIFT			30
-#define OMAP3430ES2_AUTO_ICR				(1 << 29)
+#define OMAP3430ES2_AUTO_ICR_MASK			(1 << 29)
 #define OMAP3430ES2_AUTO_ICR_SHIFT			29
-#define OMAP3430_AUTO_AES2				(1 << 28)
+#define OMAP3430_AUTO_AES2_MASK				(1 << 28)
 #define OMAP3430_AUTO_AES2_SHIFT			28
-#define OMAP3430_AUTO_SHA12				(1 << 27)
+#define OMAP3430_AUTO_SHA12_MASK			(1 << 27)
 #define OMAP3430_AUTO_SHA12_SHIFT			27
-#define OMAP3430_AUTO_DES2				(1 << 26)
+#define OMAP3430_AUTO_DES2_MASK				(1 << 26)
 #define OMAP3430_AUTO_DES2_SHIFT			26
-#define OMAP3430_AUTO_MMC2				(1 << 25)
+#define OMAP3430_AUTO_MMC2_MASK				(1 << 25)
 #define OMAP3430_AUTO_MMC2_SHIFT			25
-#define OMAP3430_AUTO_MMC1				(1 << 24)
+#define OMAP3430_AUTO_MMC1_MASK				(1 << 24)
 #define OMAP3430_AUTO_MMC1_SHIFT			24
-#define OMAP3430_AUTO_MSPRO				(1 << 23)
+#define OMAP3430_AUTO_MSPRO_MASK			(1 << 23)
 #define OMAP3430_AUTO_MSPRO_SHIFT			23
-#define OMAP3430_AUTO_HDQ				(1 << 22)
+#define OMAP3430_AUTO_HDQ_MASK				(1 << 22)
 #define OMAP3430_AUTO_HDQ_SHIFT				22
-#define OMAP3430_AUTO_MCSPI4				(1 << 21)
+#define OMAP3430_AUTO_MCSPI4_MASK			(1 << 21)
 #define OMAP3430_AUTO_MCSPI4_SHIFT			21
-#define OMAP3430_AUTO_MCSPI3				(1 << 20)
+#define OMAP3430_AUTO_MCSPI3_MASK			(1 << 20)
 #define OMAP3430_AUTO_MCSPI3_SHIFT			20
-#define OMAP3430_AUTO_MCSPI2				(1 << 19)
+#define OMAP3430_AUTO_MCSPI2_MASK			(1 << 19)
 #define OMAP3430_AUTO_MCSPI2_SHIFT			19
-#define OMAP3430_AUTO_MCSPI1				(1 << 18)
+#define OMAP3430_AUTO_MCSPI1_MASK			(1 << 18)
 #define OMAP3430_AUTO_MCSPI1_SHIFT			18
-#define OMAP3430_AUTO_I2C3				(1 << 17)
+#define OMAP3430_AUTO_I2C3_MASK				(1 << 17)
 #define OMAP3430_AUTO_I2C3_SHIFT			17
-#define OMAP3430_AUTO_I2C2				(1 << 16)
+#define OMAP3430_AUTO_I2C2_MASK				(1 << 16)
 #define OMAP3430_AUTO_I2C2_SHIFT			16
-#define OMAP3430_AUTO_I2C1				(1 << 15)
+#define OMAP3430_AUTO_I2C1_MASK				(1 << 15)
 #define OMAP3430_AUTO_I2C1_SHIFT			15
-#define OMAP3430_AUTO_UART2				(1 << 14)
+#define OMAP3430_AUTO_UART2_MASK			(1 << 14)
 #define OMAP3430_AUTO_UART2_SHIFT			14
-#define OMAP3430_AUTO_UART1				(1 << 13)
+#define OMAP3430_AUTO_UART1_MASK			(1 << 13)
 #define OMAP3430_AUTO_UART1_SHIFT			13
-#define OMAP3430_AUTO_GPT11				(1 << 12)
+#define OMAP3430_AUTO_GPT11_MASK			(1 << 12)
 #define OMAP3430_AUTO_GPT11_SHIFT			12
-#define OMAP3430_AUTO_GPT10				(1 << 11)
+#define OMAP3430_AUTO_GPT10_MASK			(1 << 11)
 #define OMAP3430_AUTO_GPT10_SHIFT			11
-#define OMAP3430_AUTO_MCBSP5				(1 << 10)
+#define OMAP3430_AUTO_MCBSP5_MASK			(1 << 10)
 #define OMAP3430_AUTO_MCBSP5_SHIFT			10
-#define OMAP3430_AUTO_MCBSP1				(1 << 9)
+#define OMAP3430_AUTO_MCBSP1_MASK			(1 << 9)
 #define OMAP3430_AUTO_MCBSP1_SHIFT			9
-#define OMAP3430ES1_AUTO_FAC				(1 << 8)
+#define OMAP3430ES1_AUTO_FAC_MASK			(1 << 8)
 #define OMAP3430ES1_AUTO_FAC_SHIFT			8
-#define OMAP3430_AUTO_MAILBOXES				(1 << 7)
+#define OMAP3430_AUTO_MAILBOXES_MASK			(1 << 7)
 #define OMAP3430_AUTO_MAILBOXES_SHIFT			7
-#define OMAP3430_AUTO_OMAPCTRL				(1 << 6)
+#define OMAP3430_AUTO_OMAPCTRL_MASK			(1 << 6)
 #define OMAP3430_AUTO_OMAPCTRL_SHIFT			6
-#define OMAP3430ES1_AUTO_FSHOSTUSB			(1 << 5)
+#define OMAP3430ES1_AUTO_FSHOSTUSB_MASK			(1 << 5)
 #define OMAP3430ES1_AUTO_FSHOSTUSB_SHIFT		5
-#define OMAP3430_AUTO_HSOTGUSB				(1 << 4)
+#define OMAP3430_AUTO_HSOTGUSB_MASK			(1 << 4)
 #define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
-#define OMAP3430ES1_AUTO_D2D				(1 << 3)
+#define OMAP3430ES1_AUTO_D2D_MASK			(1 << 3)
 #define OMAP3430ES1_AUTO_D2D_SHIFT			3
-#define OMAP3430_AUTO_SAD2D				(1 << 3)
+#define OMAP3430_AUTO_SAD2D_MASK			(1 << 3)
 #define OMAP3430_AUTO_SAD2D_SHIFT			3
-#define OMAP3430_AUTO_SSI				(1 << 0)
+#define OMAP3430_AUTO_SSI_MASK				(1 << 0)
 #define OMAP3430_AUTO_SSI_SHIFT				0
 
 /* CM_AUTOIDLE2_CORE */
-#define OMAP3430_AUTO_PKA				(1 << 4)
+#define OMAP3430_AUTO_PKA_MASK				(1 << 4)
 #define OMAP3430_AUTO_PKA_SHIFT				4
-#define OMAP3430_AUTO_AES1				(1 << 3)
+#define OMAP3430_AUTO_AES1_MASK				(1 << 3)
 #define OMAP3430_AUTO_AES1_SHIFT			3
-#define OMAP3430_AUTO_RNG				(1 << 2)
+#define OMAP3430_AUTO_RNG_MASK				(1 << 2)
 #define OMAP3430_AUTO_RNG_SHIFT				2
-#define OMAP3430_AUTO_SHA11				(1 << 1)
+#define OMAP3430_AUTO_SHA11_MASK			(1 << 1)
 #define OMAP3430_AUTO_SHA11_SHIFT			1
-#define OMAP3430_AUTO_DES1				(1 << 0)
+#define OMAP3430_AUTO_DES1_MASK				(1 << 0)
 #define OMAP3430_AUTO_DES1_SHIFT			0
 
 /* CM_AUTOIDLE3_CORE */
@@ -331,7 +331,7 @@
 #define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
 #define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
 #define OMAP3430_AUTO_MAD2D_SHIFT			3
-#define OMAP3430_AUTO_MAD2D				(1 << 3)
+#define OMAP3430_AUTO_MAD2D_MASK			(1 << 3)
 
 /* CM_CLKSEL_CORE */
 #define OMAP3430_CLKSEL_SSI_SHIFT			8
@@ -366,9 +366,9 @@
 #define OMAP3430_CLKACTIVITY_L3_MASK			(1 << 0)
 
 /* CM_FCLKEN_GFX */
-#define OMAP3430ES1_EN_3D				(1 << 2)
+#define OMAP3430ES1_EN_3D_MASK				(1 << 2)
 #define OMAP3430ES1_EN_3D_SHIFT				2
-#define OMAP3430ES1_EN_2D				(1 << 1)
+#define OMAP3430ES1_EN_2D_MASK				(1 << 1)
 #define OMAP3430ES1_EN_2D_SHIFT				1
 
 /* CM_ICLKEN_GFX specific bits */
@@ -416,9 +416,9 @@
 #define OMAP3430ES2_EN_USIMOCP_MASK			(1 << 9)
 
 /* CM_ICLKEN_WKUP specific bits */
-#define OMAP3430_EN_WDT1				(1 << 4)
+#define OMAP3430_EN_WDT1_MASK				(1 << 4)
 #define OMAP3430_EN_WDT1_SHIFT				4
-#define OMAP3430_EN_32KSYNC				(1 << 2)
+#define OMAP3430_EN_32KSYNC_MASK			(1 << 2)
 #define OMAP3430_EN_32KSYNC_SHIFT			2
 
 /* CM_IDLEST_WKUP specific bits */
@@ -432,19 +432,19 @@
 #define OMAP3430_ST_32KSYNC_MASK			(1 << 2)
 
 /* CM_AUTOIDLE_WKUP */
-#define OMAP3430ES2_AUTO_USIMOCP				(1 << 9)
+#define OMAP3430ES2_AUTO_USIMOCP_MASK			(1 << 9)
 #define OMAP3430ES2_AUTO_USIMOCP_SHIFT			9
-#define OMAP3430_AUTO_WDT2				(1 << 5)
+#define OMAP3430_AUTO_WDT2_MASK				(1 << 5)
 #define OMAP3430_AUTO_WDT2_SHIFT			5
-#define OMAP3430_AUTO_WDT1				(1 << 4)
+#define OMAP3430_AUTO_WDT1_MASK				(1 << 4)
 #define OMAP3430_AUTO_WDT1_SHIFT			4
-#define OMAP3430_AUTO_GPIO1				(1 << 3)
+#define OMAP3430_AUTO_GPIO1_MASK			(1 << 3)
 #define OMAP3430_AUTO_GPIO1_SHIFT			3
-#define OMAP3430_AUTO_32KSYNC				(1 << 2)
+#define OMAP3430_AUTO_32KSYNC_MASK			(1 << 2)
 #define OMAP3430_AUTO_32KSYNC_SHIFT			2
-#define OMAP3430_AUTO_GPT12				(1 << 1)
+#define OMAP3430_AUTO_GPT12_MASK			(1 << 1)
 #define OMAP3430_AUTO_GPT12_SHIFT			1
-#define OMAP3430_AUTO_GPT1				(1 << 0)
+#define OMAP3430_AUTO_GPT1_MASK				(1 << 0)
 #define OMAP3430_AUTO_GPT1_SHIFT			0
 
 /* CM_CLKSEL_WKUP */
@@ -479,7 +479,7 @@
 #define OMAP3430_EN_CORE_DPLL_MASK			(0x7 << 0)
 
 /* CM_CLKEN2_PLL */
-#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT		10
+#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT	10
 #define OMAP3430ES2_PERIPH2_DPLL_RAMPTIME_MASK		(0x3 << 8)
 #define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT		4
 #define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK		(0xf << 4)
@@ -488,10 +488,10 @@
 #define OMAP3430ES2_EN_PERIPH2_DPLL_MASK		(0x7 << 0)
 
 /* CM_IDLEST_CKGEN */
-#define OMAP3430_ST_54M_CLK				(1 << 5)
-#define OMAP3430_ST_12M_CLK				(1 << 4)
-#define OMAP3430_ST_48M_CLK				(1 << 3)
-#define OMAP3430_ST_96M_CLK				(1 << 2)
+#define OMAP3430_ST_54M_CLK_MASK			(1 << 5)
+#define OMAP3430_ST_12M_CLK_MASK			(1 << 4)
+#define OMAP3430_ST_48M_CLK_MASK			(1 << 3)
+#define OMAP3430_ST_96M_CLK_MASK			(1 << 2)
 #define OMAP3430_ST_PERIPH_CLK_SHIFT			1
 #define OMAP3430_ST_PERIPH_CLK_MASK			(1 << 1)
 #define OMAP3430_ST_CORE_CLK_SHIFT			0
@@ -558,22 +558,22 @@
 
 /* CM_CLKOUT_CTRL */
 #define OMAP3430_CLKOUT2_EN_SHIFT			7
-#define OMAP3430_CLKOUT2_EN				(1 << 7)
+#define OMAP3430_CLKOUT2_EN_MASK			(1 << 7)
 #define OMAP3430_CLKOUT2_DIV_SHIFT			3
 #define OMAP3430_CLKOUT2_DIV_MASK			(0x7 << 3)
 #define OMAP3430_CLKOUT2SOURCE_SHIFT			0
 #define OMAP3430_CLKOUT2SOURCE_MASK			(0x3 << 0)
 
 /* CM_FCLKEN_DSS */
-#define OMAP3430_EN_TV					(1 << 2)
+#define OMAP3430_EN_TV_MASK				(1 << 2)
 #define OMAP3430_EN_TV_SHIFT				2
-#define OMAP3430_EN_DSS2				(1 << 1)
+#define OMAP3430_EN_DSS2_MASK				(1 << 1)
 #define OMAP3430_EN_DSS2_SHIFT				1
-#define OMAP3430_EN_DSS1				(1 << 0)
+#define OMAP3430_EN_DSS1_MASK				(1 << 0)
 #define OMAP3430_EN_DSS1_SHIFT				0
 
 /* CM_ICLKEN_DSS */
-#define OMAP3430_CM_ICLKEN_DSS_EN_DSS			(1 << 0)
+#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_MASK		(1 << 0)
 #define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT		0
 
 /* CM_IDLEST_DSS */
@@ -585,7 +585,7 @@
 #define OMAP3430ES1_ST_DSS_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_DSS */
-#define OMAP3430_AUTO_DSS				(1 << 0)
+#define OMAP3430_AUTO_DSS_MASK				(1 << 0)
 #define OMAP3430_AUTO_DSS_SHIFT				0
 
 /* CM_CLKSEL_DSS */
@@ -607,16 +607,16 @@
 #define OMAP3430_CLKACTIVITY_DSS_MASK			(1 << 0)
 
 /* CM_FCLKEN_CAM specific bits */
-#define OMAP3430_EN_CSI2				(1 << 1)
+#define OMAP3430_EN_CSI2_MASK				(1 << 1)
 #define OMAP3430_EN_CSI2_SHIFT				1
 
 /* CM_ICLKEN_CAM specific bits */
 
 /* CM_IDLEST_CAM */
-#define OMAP3430_ST_CAM					(1 << 0)
+#define OMAP3430_ST_CAM_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_CAM */
-#define OMAP3430_AUTO_CAM				(1 << 0)
+#define OMAP3430_AUTO_CAM_MASK				(1 << 0)
 #define OMAP3430_AUTO_CAM_SHIFT				0
 
 /* CM_CLKSEL_CAM */
@@ -649,41 +649,41 @@
 #define OMAP3430_ST_MCBSP2_MASK				(1 << 0)
 
 /* CM_AUTOIDLE_PER */
-#define OMAP3430_AUTO_GPIO6				(1 << 17)
+#define OMAP3430_AUTO_GPIO6_MASK			(1 << 17)
 #define OMAP3430_AUTO_GPIO6_SHIFT			17
-#define OMAP3430_AUTO_GPIO5				(1 << 16)
+#define OMAP3430_AUTO_GPIO5_MASK			(1 << 16)
 #define OMAP3430_AUTO_GPIO5_SHIFT			16
-#define OMAP3430_AUTO_GPIO4				(1 << 15)
+#define OMAP3430_AUTO_GPIO4_MASK			(1 << 15)
 #define OMAP3430_AUTO_GPIO4_SHIFT			15
-#define OMAP3430_AUTO_GPIO3				(1 << 14)
+#define OMAP3430_AUTO_GPIO3_MASK			(1 << 14)
 #define OMAP3430_AUTO_GPIO3_SHIFT			14
-#define OMAP3430_AUTO_GPIO2				(1 << 13)
+#define OMAP3430_AUTO_GPIO2_MASK			(1 << 13)
 #define OMAP3430_AUTO_GPIO2_SHIFT			13
-#define OMAP3430_AUTO_WDT3				(1 << 12)
+#define OMAP3430_AUTO_WDT3_MASK				(1 << 12)
 #define OMAP3430_AUTO_WDT3_SHIFT			12
-#define OMAP3430_AUTO_UART3				(1 << 11)
+#define OMAP3430_AUTO_UART3_MASK			(1 << 11)
 #define OMAP3430_AUTO_UART3_SHIFT			11
-#define OMAP3430_AUTO_GPT9				(1 << 10)
+#define OMAP3430_AUTO_GPT9_MASK				(1 << 10)
 #define OMAP3430_AUTO_GPT9_SHIFT			10
-#define OMAP3430_AUTO_GPT8				(1 << 9)
+#define OMAP3430_AUTO_GPT8_MASK				(1 << 9)
 #define OMAP3430_AUTO_GPT8_SHIFT			9
-#define OMAP3430_AUTO_GPT7				(1 << 8)
+#define OMAP3430_AUTO_GPT7_MASK				(1 << 8)
 #define OMAP3430_AUTO_GPT7_SHIFT			8
-#define OMAP3430_AUTO_GPT6				(1 << 7)
+#define OMAP3430_AUTO_GPT6_MASK				(1 << 7)
 #define OMAP3430_AUTO_GPT6_SHIFT			7
-#define OMAP3430_AUTO_GPT5				(1 << 6)
+#define OMAP3430_AUTO_GPT5_MASK				(1 << 6)
 #define OMAP3430_AUTO_GPT5_SHIFT			6
-#define OMAP3430_AUTO_GPT4				(1 << 5)
+#define OMAP3430_AUTO_GPT4_MASK				(1 << 5)
 #define OMAP3430_AUTO_GPT4_SHIFT			5
-#define OMAP3430_AUTO_GPT3				(1 << 4)
+#define OMAP3430_AUTO_GPT3_MASK				(1 << 4)
 #define OMAP3430_AUTO_GPT3_SHIFT			4
-#define OMAP3430_AUTO_GPT2				(1 << 3)
+#define OMAP3430_AUTO_GPT2_MASK				(1 << 3)
 #define OMAP3430_AUTO_GPT2_SHIFT			3
-#define OMAP3430_AUTO_MCBSP4				(1 << 2)
+#define OMAP3430_AUTO_MCBSP4_MASK			(1 << 2)
 #define OMAP3430_AUTO_MCBSP4_SHIFT			2
-#define OMAP3430_AUTO_MCBSP3				(1 << 1)
+#define OMAP3430_AUTO_MCBSP3_MASK			(1 << 1)
 #define OMAP3430_AUTO_MCBSP3_SHIFT			1
-#define OMAP3430_AUTO_MCBSP2				(1 << 0)
+#define OMAP3430_AUTO_MCBSP2_MASK			(1 << 0)
 #define OMAP3430_AUTO_MCBSP2_SHIFT			0
 
 /* CM_CLKSEL_PER */
@@ -705,7 +705,7 @@
 #define OMAP3430_CLKSEL_GPT2_SHIFT			0
 
 /* CM_SLEEPDEP_PER specific bits */
-#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2		(1 << 2)
+#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2_MASK		(1 << 2)
 
 /* CM_CLKSTCTRL_PER */
 #define OMAP3430_CLKTRCTRL_PER_SHIFT			0
@@ -755,10 +755,10 @@
 #define OMAP3430_PERIPH_DPLL_EMU_DIV_MASK		(0x7f << 0)
 
 /* CM_POLCTRL */
-#define OMAP3430_CLKOUT2_POL				(1 << 0)
+#define OMAP3430_CLKOUT2_POL_MASK			(1 << 0)
 
 /* CM_IDLEST_NEON */
-#define OMAP3430_ST_NEON				(1 << 0)
+#define OMAP3430_ST_NEON_MASK				(1 << 0)
 
 /* CM_CLKSTCTRL_NEON */
 #define OMAP3430_CLKTRCTRL_NEON_SHIFT			0
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/control.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/control.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/control.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/control.c	2010-08-01 18:11:14.000000000 -0400
@@ -194,11 +194,12 @@
 	u32 offset = 0;
 	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
 	if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
-		OMAP3430_GLOBAL_COLD_RST) {
+	    OMAP3430_GLOBAL_COLD_RST_MASK) {
 		for ( ; offset <= max_offset; offset += 0x4)
 			__raw_writel(0x0, (v_addr + offset));
-		prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST, OMAP3430_GR_MOD,
-			OMAP3_PRM_RSTST_OFFSET);
+		prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
+				     OMAP3430_GR_MOD,
+				     OMAP3_PRM_RSTST_OFFSET);
 	}
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/devices.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/devices.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/devices.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/devices.c	2010-08-01 18:11:14.000000000 -0400
@@ -17,8 +17,10 @@
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
+#include <asm/pmu.h>
 
 #include <plat/control.h>
 #include <plat/tc.h>
@@ -26,6 +28,7 @@
 #include <plat/mux.h>
 #include <mach/gpio.h>
 #include <plat/mmc.h>
+#include <plat/dma.h>
 
 #include "mux.h"
 
@@ -453,8 +456,41 @@
 static inline void omap_init_mcspi(void) {}
 #endif
 
-#ifdef CONFIG_OMAP_SHA1_MD5
-static struct resource sha1_md5_resources[] = {
+static struct resource omap2_pmu_resource = {
+	.start	= 3,
+	.end	= 3,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct resource omap3_pmu_resource = {
+	.start	= INT_34XX_BENCH_MPU_EMUL,
+	.end	= INT_34XX_BENCH_MPU_EMUL,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct platform_device omap_pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.num_resources	= 1,
+};
+
+static void omap_init_pmu(void)
+{
+	if (cpu_is_omap24xx())
+		omap_pmu_device.resource = &omap2_pmu_resource;
+	else if (cpu_is_omap34xx())
+		omap_pmu_device.resource = &omap3_pmu_resource;
+	else
+		return;
+
+	platform_device_register(&omap_pmu_device);
+}
+
+
+#if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP2
+static struct resource omap2_sham_resources[] = {
 	{
 		.start	= OMAP24XX_SEC_SHA1MD5_BASE,
 		.end	= OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
@@ -465,20 +501,55 @@
 		.flags	= IORESOURCE_IRQ,
 	}
 };
+static int omap2_sham_resources_sz = ARRAY_SIZE(omap2_sham_resources);
+#else
+#define omap2_sham_resources		NULL
+#define omap2_sham_resources_sz		0
+#endif
 
-static struct platform_device sha1_md5_device = {
-	.name		= "OMAP SHA1/MD5",
+#ifdef CONFIG_ARCH_OMAP3
+static struct resource omap3_sham_resources[] = {
+	{
+		.start	= OMAP34XX_SEC_SHA1MD5_BASE,
+		.end	= OMAP34XX_SEC_SHA1MD5_BASE + 0x64,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_34XX_SHA1MD52_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= OMAP34XX_DMA_SHA1MD5_RX,
+		.flags	= IORESOURCE_DMA,
+	}
+};
+static int omap3_sham_resources_sz = ARRAY_SIZE(omap3_sham_resources);
+#else
+#define omap3_sham_resources		NULL
+#define omap3_sham_resources_sz		0
+#endif
+
+static struct platform_device sham_device = {
+	.name		= "omap-sham",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sha1_md5_resources),
-	.resource	= sha1_md5_resources,
 };
 
-static void omap_init_sha1_md5(void)
+static void omap_init_sham(void)
 {
-	platform_device_register(&sha1_md5_device);
+	if (cpu_is_omap24xx()) {
+		sham_device.resource = omap2_sham_resources;
+		sham_device.num_resources = omap2_sham_resources_sz;
+	} else if (cpu_is_omap34xx()) {
+		sham_device.resource = omap3_sham_resources;
+		sham_device.num_resources = omap3_sham_resources_sz;
+	} else {
+		pr_err("%s: platform not supported\n", __func__);
+		return;
+	}
+	platform_device_register(&sham_device);
 }
 #else
-static inline void omap_init_sha1_md5(void) { }
+static inline void omap_init_sham(void) { }
 #endif
 
 /*-------------------------------------------------------------------------*/
@@ -591,6 +662,15 @@
 static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
 {
+	if ((mmc_controller->slots[0].switch_pin > 0) && \
+		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
+					OMAP_PIN_INPUT_PULLUP);
+	if ((mmc_controller->slots[0].gpio_wp > 0) && \
+		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
+					OMAP_PIN_INPUT_PULLUP);
+
 	if (cpu_is_omap2420() && controller_nr == 0) {
 		omap_cfg_reg(H18_24XX_MMC_CMD);
 		omap_cfg_reg(H15_24XX_MMC_CLKI);
@@ -786,6 +866,33 @@
 static inline void omap_hdq_init(void) {}
 #endif
 
+/*---------------------------------------------------------------------------*/
+
+#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
+	defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = {
+};
+#else
+static struct resource omap_vout_resource[2] = {
+};
+#endif
+
+static struct platform_device omap_vout_device = {
+	.name		= "omap_vout",
+	.num_resources	= ARRAY_SIZE(omap_vout_resource),
+	.resource 	= &omap_vout_resource[0],
+	.id		= -1,
+};
+static void omap_init_vout(void)
+{
+	if (platform_device_register(&omap_vout_device) < 0)
+		printk(KERN_ERR "Unable to register OMAP-VOUT device\n");
+}
+#else
+static inline void omap_init_vout(void) {}
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int __init omap2_init_devices(void)
@@ -797,9 +904,11 @@
 	omap_init_camera();
 	omap_init_mbox();
 	omap_init_mcspi();
+	omap_init_pmu();
 	omap_hdq_init();
 	omap_init_sti();
-	omap_init_sha1_md5();
+	omap_init_sham();
+	omap_init_vout();
 
 	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/hsmmc.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/hsmmc.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/hsmmc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/hsmmc.c	2010-08-01 18:11:14.000000000 -0400
@@ -24,6 +24,7 @@
 
 static u16 control_pbias_offset;
 static u16 control_devconf1_offset;
+static u16 control_mmc1;
 
 #define HSMMC_NAME_LEN	9
 
@@ -42,7 +43,7 @@
 #define hsmmc_get_context_loss NULL
 #endif
 
-static void hsmmc1_before_set_reg(struct device *dev, int slot,
+static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
 				  int power_on, int vdd)
 {
 	u32 reg, prog_io;
@@ -95,7 +96,7 @@
 	}
 }
 
-static void hsmmc1_after_set_reg(struct device *dev, int slot,
+static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
 				 int power_on, int vdd)
 {
 	u32 reg;
@@ -119,6 +120,60 @@
 	}
 }
 
+static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot,
+				  int power_on, int vdd)
+{
+	u32 reg;
+
+	/*
+	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
+	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
+	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
+	 *
+	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
+	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 *
+	 * FIXME handle VMMC1A as needed ...
+	 */
+	reg = omap_ctrl_readl(control_pbias_offset);
+	reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ |
+					OMAP4_USBC1_ICUSB_PWRDNZ);
+	omap_ctrl_writel(reg, control_pbias_offset);
+}
+
+static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
+				 int power_on, int vdd)
+{
+	u32 reg;
+
+	if (power_on) {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ;
+		if ((1 << vdd) <= MMC_VDD_165_195)
+			reg &= ~OMAP4_MMC1_PBIASLITE_VMODE;
+		else
+			reg |= OMAP4_MMC1_PBIASLITE_VMODE;
+		reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ | OMAP4_MMC1_PWRDNZ |
+						OMAP4_USBC1_ICUSB_PWRDNZ);
+		omap_ctrl_writel(reg, control_pbias_offset);
+		/* 4 microsec delay for comparator to generate an error*/
+		udelay(4);
+		reg = omap_ctrl_readl(control_pbias_offset);
+		if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR) {
+			pr_err("Pbias Voltage is not same as LDO\n");
+			/* Caution : On VMODE_ERROR Power Down MMC IO */
+			reg &= ~(OMAP4_MMC1_PWRDNZ | OMAP4_USBC1_ICUSB_PWRDNZ);
+			omap_ctrl_writel(reg, control_pbias_offset);
+		}
+	} else {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		 reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ |
+			OMAP4_MMC1_PBIASLITE_VMODE | OMAP4_MMC1_PWRDNZ |
+			OMAP4_USBC1_ICUSB_PWRDNZ);
+		omap_ctrl_writel(reg, control_pbias_offset);
+	}
+}
+
 static void hsmmc23_before_set_reg(struct device *dev, int slot,
 				   int power_on, int vdd)
 {
@@ -139,6 +194,12 @@
 	}
 }
 
+static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
+							int vdd)
+{
+	return 0;
+}
+
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
 
 void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
@@ -146,13 +207,28 @@
 	struct omap2_hsmmc_info *c;
 	int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
 	int i;
+	u32 reg;
 
-	if (cpu_is_omap2430()) {
-		control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
-		control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
+	if (!cpu_is_omap44xx()) {
+		if (cpu_is_omap2430()) {
+			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
+			control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
+		} else {
+			control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
+			control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
+		}
 	} else {
-		control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
-		control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
+		control_pbias_offset = OMAP44XX_CONTROL_PBIAS_LITE;
+		control_mmc1 = OMAP44XX_CONTROL_MMC1;
+		reg = omap_ctrl_readl(control_mmc1);
+		reg |= (OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0 |
+			OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1);
+		reg &= ~(OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2 |
+			OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3);
+		reg |= (OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL |
+			OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL |
+			OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL);
+		omap_ctrl_writel(reg, control_mmc1);
 	}
 
 	for (c = controllers; c->mmc; c++) {
@@ -216,11 +292,27 @@
 		 */
 		mmc->slots[0].ocr_mask = c->ocr_mask;
 
+		if (cpu_is_omap3517() || cpu_is_omap3505())
+			mmc->slots[0].set_power = nop_mmc_set_power;
+		else
+			mmc->slots[0].features |= HSMMC_HAS_PBIAS;
+
 		switch (c->mmc) {
 		case 1:
-			/* on-chip level shifting via PBIAS0/PBIAS1 */
-			mmc->slots[0].before_set_reg = hsmmc1_before_set_reg;
-			mmc->slots[0].after_set_reg = hsmmc1_after_set_reg;
+			if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+				/* on-chip level shifting via PBIAS0/PBIAS1 */
+				if (cpu_is_omap44xx()) {
+					mmc->slots[0].before_set_reg =
+						omap4_hsmmc1_before_set_reg;
+					mmc->slots[0].after_set_reg =
+						omap4_hsmmc1_after_set_reg;
+				} else {
+					mmc->slots[0].before_set_reg =
+						omap_hsmmc1_before_set_reg;
+					mmc->slots[0].after_set_reg =
+						omap_hsmmc1_after_set_reg;
+				}
+			}
 
 			/* Omap3630 HSMMC1 supports only 4-bit */
 			if (cpu_is_omap3630() && c->wires > 4) {
@@ -235,9 +327,11 @@
 				c->wires = 4;
 			/* FALLTHROUGH */
 		case 3:
-			/* off-chip level shifting, or none */
-			mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
-			mmc->slots[0].after_set_reg = NULL;
+			if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+				/* off-chip level shifting, or none */
+				mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
+				mmc->slots[0].after_set_reg = NULL;
+			}
 			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/include/mach/am35xx.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/include/mach/am35xx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/include/mach/am35xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/include/mach/am35xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -23,4 +23,22 @@
 #define AM35XX_IPSS_HECC_BASE		0x5C050000
 #define AM35XX_IPSS_VPFE_BASE		0x5C060000
 
-#endif /*  __ASM_ARCH_AM35XX_H */
+
+/* HECC module specifc offset definitions */
+#define AM35XX_HECC_SCC_HECC_OFFSET	(0x0)
+#define AM35XX_HECC_SCC_RAM_OFFSET	(0x3000)
+#define AM35XX_HECC_RAM_OFFSET		(0x3000)
+#define AM35XX_HECC_MBOX_OFFSET		(0x2000)
+#define AM35XX_HECC_INT_LINE		(0x0)
+#define AM35XX_HECC_VERSION		(0x1)
+
+#define AM35XX_EMAC_CNTRL_OFFSET	(0x10000)
+#define AM35XX_EMAC_CNTRL_MOD_OFFSET	(0x0)
+#define AM35XX_EMAC_CNTRL_RAM_OFFSET	(0x20000)
+#define AM35XX_EMAC_MDIO_OFFSET		(0x30000)
+#define AM35XX_EMAC_CNTRL_RAM_SIZE	(0x2000)
+#define AM35XX_EMAC_RAM_ADDR		(AM3517_EMAC_BASE + \
+						AM3517_EMAC_CNTRL_RAM_OFFSET)
+#define AM35XX_EMAC_HW_RAM_ADDR		(0x01E20000)
+
+#endif  /*  __ASM_ARCH_AM35XX_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/include/mach/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-omap2/include/mach/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/include/mach/debug-macro.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/include/mach/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -13,6 +13,8 @@
 
 #include <linux/serial_reg.h>
 
+#include <asm/memory.h>
+
 #include <plat/serial.h>
 
 #define UART_OFFSET(addr)	((addr) & 0x00ffffff)
@@ -40,13 +42,12 @@
 		cmp	\rx, #0			@ is port configured?
 		bne	99f			@ already configured
 
-		/* Check UART1 scratchpad register for uart to use */
+		/* Check the debug UART configuration set in uncompress.h */
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xfa000000	@ virtual base
-		orr	\rx, \rx, #0x0006a000	@ uart1 on omap2/3/4
-		ldrb	\rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] @ scratchpad
+		ldreq	\rx, =OMAP_UART_INFO
+		ldrne	\rx, =__phys_to_virt(OMAP_UART_INFO)
+		ldr	\rx, [\rx, #0]
 
 		/* Select the UART to use based on the UART1 scratchpad value */
 		cmp	\rx, #0			@ no port configured?
@@ -87,10 +88,10 @@
 		b	98f
 44:		mov	\rx, #UART_OFFSET(OMAP4_UART4_BASE)
 		b	98f
-95:		mov	\rx, #ZOOM_UART_BASE
+95:		ldr	\rx, =ZOOM_UART_BASE
 		ldr	\tmp, =omap_uart_phys
 		str	\rx, [\tmp, #0]
-		mov	\rx, #ZOOM_UART_VIRT
+		ldr	\rx, =ZOOM_UART_VIRT
 		ldr	\tmp, =omap_uart_virt
 		str	\rx, [\tmp, #0]
 		mov	\rx, #(UART_LSR << ZOOM_PORT_SHIFT)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/include/mach/omap4-common.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/include/mach/omap4-common.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/include/mach/omap4-common.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/include/mach/omap4-common.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,26 @@
+/*
+ * omap4-common.h: OMAP4 specific common header file
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * Author:
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_OMAP4_COMMON_H
+#define OMAP_ARCH_OMAP4_COMMON_H
+
+#ifdef CONFIG_CACHE_L2X0
+extern void __iomem *l2cache_base;
+#endif
+
+extern void __iomem *gic_cpu_base_addr;
+extern void __iomem *gic_dist_base_addr;
+
+extern void __init gic_init_irq(void);
+extern void omap_smc1(u32 fn, u32 arg);
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/io.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/io.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/io.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/io.c	2010-08-01 18:11:14.000000000 -0400
@@ -166,6 +166,15 @@
 		.length		= L4_EMU_34XX_SIZE,
 		.type		= MT_DEVICE
 	},
+#if defined(CONFIG_DEBUG_LL) &&							\
+	(defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
+	{
+		.virtual	= ZOOM_UART_VIRT,
+		.pfn		= __phys_to_pfn(ZOOM_UART_BASE),
+		.length		= SZ_1M,
+		.type		= MT_DEVICE
+	},
+#endif
 };
 #endif
 #ifdef	CONFIG_ARCH_OMAP4
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/iommu2.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/iommu2.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/iommu2.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/iommu2.c	2010-08-01 18:11:14.000000000 -0400
@@ -147,6 +147,7 @@
 	printk("\n");
 
 	iommu_write_reg(obj, stat, MMU_IRQSTATUS);
+	omap2_iommu_disable(obj);
 	return stat;
 }
 
@@ -184,7 +185,7 @@
 	if (!cr)
 		return ERR_PTR(-ENOMEM);
 
-	cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz;
+	cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz | e->valid;
 	cr->ram = e->pa | e->endian | e->elsz | e->mixed;
 
 	return cr;
@@ -212,7 +213,8 @@
 	char *p = buf;
 
 	/* FIXME: Need more detail analysis of cam/ram */
-	p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram);
+	p += sprintf(p, "%08x %08x %01x\n", cr->cam, cr->ram,
+					(cr->cam & MMU_CAM_P) ? 1 : 0);
 
 	return p - buf;
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-omap2/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -10,6 +10,7 @@
 config ARCH_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP2
+	select ARCH_OMAP_OTG
 
 config ARCH_OMAP3430
 	bool "OMAP3430 support"
@@ -141,6 +142,12 @@
 	depends on ARCH_OMAP3
 	select OMAP_PACKAGE_CBB
 
+config MACH_SBC3530
+	bool "OMAP3 SBC STALKER board"
+	depends on ARCH_OMAP3
+	select OMAP_PACKAGE_CUS
+	select OMAP_MUX
+
 config MACH_OMAP_3630SDP
 	bool "OMAP3630 SDP board"
 	depends on ARCH_OMAP3
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-omap2/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -22,7 +22,7 @@
 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
-obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o
+obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o
 
 AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a
 
@@ -89,10 +89,7 @@
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o
 
-iommu-y					+= iommu2.o
-iommu-$(CONFIG_ARCH_OMAP3)		+= omap3-iommu.o
-
-obj-$(CONFIG_OMAP_IOMMU)		+= $(iommu-y)
+obj-$(CONFIG_OMAP_IOMMU)		:= iommu2.o omap-iommu.o
 
 i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
 obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
@@ -122,6 +119,7 @@
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-sdram.o \
 					   board-rx51-peripherals.o \
+					   board-rx51-video.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
 					   board-zoom-peripherals.o \
@@ -140,10 +138,13 @@
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
 					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
+obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
+					   hsmmc.o
 
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
 
+obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
+					   hsmmc.o
 # Platform specific device init code
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/mcbsp.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/mcbsp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/mcbsp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/mcbsp.c	2010-08-01 18:11:14.000000000 -0400
@@ -187,32 +187,28 @@
 		.phys_base      = OMAP44XX_MCBSP1_BASE,
 		.dma_rx_sync    = OMAP44XX_DMA_MCBSP1_RX,
 		.dma_tx_sync    = OMAP44XX_DMA_MCBSP1_TX,
-		.rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
-		.tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
+		.tx_irq         = OMAP44XX_IRQ_MCBSP1,
 		.ops            = &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base      = OMAP44XX_MCBSP2_BASE,
 		.dma_rx_sync    = OMAP44XX_DMA_MCBSP2_RX,
 		.dma_tx_sync    = OMAP44XX_DMA_MCBSP2_TX,
-		.rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
-		.tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
+		.tx_irq         = OMAP44XX_IRQ_MCBSP2,
 		.ops            = &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base      = OMAP44XX_MCBSP3_BASE,
 		.dma_rx_sync    = OMAP44XX_DMA_MCBSP3_RX,
 		.dma_tx_sync    = OMAP44XX_DMA_MCBSP3_TX,
-		.rx_irq         = INT_24XX_MCBSP3_IRQ_RX,
-		.tx_irq         = INT_24XX_MCBSP3_IRQ_TX,
+		.tx_irq         = OMAP44XX_IRQ_MCBSP3,
 		.ops            = &omap2_mcbsp_ops,
 	},
 	{
 		.phys_base      = OMAP44XX_MCBSP4_BASE,
 		.dma_rx_sync    = OMAP44XX_DMA_MCBSP4_RX,
 		.dma_tx_sync    = OMAP44XX_DMA_MCBSP4_TX,
-		.rx_irq         = INT_24XX_MCBSP4_IRQ_RX,
-		.tx_irq         = INT_24XX_MCBSP4_IRQ_TX,
+		.tx_irq         = OMAP44XX_IRQ_MCBSP4,
 		.ops            = &omap2_mcbsp_ops,
 	},
 };
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/mux34xx.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/mux34xx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/mux34xx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/mux34xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -1901,26 +1901,15 @@
 	_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
 	_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
 	_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
-	_OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"),
-	_OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"),
 	_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
 	_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
 	_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
 	_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
 	_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
 	_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
-	_OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"),
-	_OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"),
-	_OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"),
-	_OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"),
-	_OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"),
-	_OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"),
-	_OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
 	_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
-	_OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"),
 	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
 	_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
-	_OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"),
 	_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
 	_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
 	_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
@@ -1928,10 +1917,7 @@
 	_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
 	_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
 	_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
-	_OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"),
-	_OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"),
 	_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
-	_OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"),
 	_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
 	_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
 	_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
@@ -1948,8 +1934,6 @@
 	_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
 	_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
 	_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
-	_OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL),
-	_OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL),
 	_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
 	_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
 	_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
@@ -1958,11 +1942,6 @@
 	_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
 	_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
 	_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
-	_OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL),
-	_OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL),
-	_OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL),
-	_OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL),
-	_OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL),
 	_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
 	_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
 	_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
@@ -2010,77 +1989,12 @@
 	_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
 	_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
 	_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
-	_OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"),
-	_OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"),
-	_OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"),
-	_OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"),
-	_OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"),
-	_OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"),
-	_OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"),
-	_OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"),
-	_OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"),
-	_OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"),
-	_OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"),
-	_OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"),
-	_OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"),
-	_OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"),
-	_OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"),
-	_OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"),
-	_OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"),
 	_OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"),
 	_OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"),
-	_OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"),
-	_OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"),
-	_OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"),
-	_OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"),
-	_OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"),
-	_OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"),
-	_OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"),
-	_OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"),
-	_OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"),
-	_OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"),
-	_OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"),
-	_OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"),
-	_OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"),
-	_OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"),
-	_OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"),
-	_OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"),
-	_OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"),
-	_OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"),
-	_OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"),
-	_OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"),
-	_OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"),
-	_OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"),
-	_OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"),
-	_OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"),
-	_OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"),
-	_OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"),
-	_OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"),
-	_OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"),
-	_OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"),
-	_OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"),
-	_OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"),
-	_OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"),
-	_OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"),
-	_OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"),
-	_OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"),
-	_OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"),
-	_OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"),
-	_OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"),
-	_OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"),
-	_OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"),
-	_OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"),
-	_OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"),
-	_OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"),
-	_OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"),
-	_OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"),
-	_OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"),
-	_OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"),
 	_OMAP3_BALLENTRY(SIM_CLK, "p26", NULL),
 	_OMAP3_BALLENTRY(SIM_IO, "p27", NULL),
 	_OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL),
 	_OMAP3_BALLENTRY(SIM_RST, "r25", NULL),
-	_OMAP3_BALLENTRY(SYS_32K, "ae25", NULL),
 	_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
 	_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
 	_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap3-iommu.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap3-iommu.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap3-iommu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap3-iommu.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,105 +0,0 @@
-/*
- * omap iommu: omap3 device registration
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-
-#include <plat/iommu.h>
-
-struct iommu_device {
-	resource_size_t base;
-	int irq;
-	struct iommu_platform_data pdata;
-	struct resource res[2];
-};
-
-static struct iommu_device devices[] = {
-	{
-		.base = 0x480bd400,
-		.irq = 24,
-		.pdata = {
-			.name = "isp",
-			.nr_tlb_entries = 8,
-			.clk_name = "cam_ick",
-		},
-	},
-#if defined(CONFIG_MPU_BRIDGE_IOMMU)
-	{
-		.base = 0x5d000000,
-		.irq = 28,
-		.pdata = {
-			.name = "iva2",
-			.nr_tlb_entries = 32,
-			.clk_name = "iva2_ck",
-		},
-	},
-#endif
-};
-#define NR_IOMMU_DEVICES ARRAY_SIZE(devices)
-
-static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
-
-static int __init omap3_iommu_init(void)
-{
-	int i, err;
-	struct resource res[] = {
-		{ .flags = IORESOURCE_MEM },
-		{ .flags = IORESOURCE_IRQ },
-	};
-
-	for (i = 0; i < NR_IOMMU_DEVICES; i++) {
-		struct platform_device *pdev;
-		const struct iommu_device *d = &devices[i];
-
-		pdev = platform_device_alloc("omap-iommu", i);
-		if (!pdev) {
-			err = -ENOMEM;
-			goto err_out;
-		}
-
-		res[0].start = d->base;
-		res[0].end = d->base + MMU_REG_SIZE - 1;
-		res[1].start = res[1].end = d->irq;
-
-		err = platform_device_add_resources(pdev, res,
-						    ARRAY_SIZE(res));
-		if (err)
-			goto err_out;
-		err = platform_device_add_data(pdev, &d->pdata,
-					       sizeof(d->pdata));
-		if (err)
-			goto err_out;
-		err = platform_device_add(pdev);
-		if (err)
-			goto err_out;
-		omap3_iommu_pdev[i] = pdev;
-	}
-	return 0;
-
-err_out:
-	while (i--)
-		platform_device_put(omap3_iommu_pdev[i]);
-	return err;
-}
-module_init(omap3_iommu_init);
-
-static void __exit omap3_iommu_exit(void)
-{
-	int i;
-
-	for (i = 0; i < NR_IOMMU_DEVICES; i++)
-		platform_device_unregister(omap3_iommu_pdev[i]);
-}
-module_exit(omap3_iommu_exit);
-
-MODULE_AUTHOR("Hiroshi DOYU");
-MODULE_DESCRIPTION("omap iommu: omap3 device registration");
-MODULE_LICENSE("GPL v2");
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap4-common.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap4-common.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap4-common.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap4-common.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,72 @@
+/*
+ * OMAP4 specific common source file.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Author:
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/hardware.h>
+#include <mach/omap4-common.h>
+
+#ifdef CONFIG_CACHE_L2X0
+void __iomem *l2cache_base;
+#endif
+
+void __iomem *gic_cpu_base_addr;
+void __iomem *gic_dist_base_addr;
+
+
+void __init gic_init_irq(void)
+{
+	/* Static mapping, never released */
+	gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
+	BUG_ON(!gic_dist_base_addr);
+	gic_dist_init(0, gic_dist_base_addr, 29);
+
+	/* Static mapping, never released */
+	gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
+	BUG_ON(!gic_cpu_base_addr);
+	gic_cpu_init(0, gic_cpu_base_addr);
+}
+
+#ifdef CONFIG_CACHE_L2X0
+static int __init omap_l2_cache_init(void)
+{
+	/*
+	 * To avoid code running on other OMAPs in
+	 * multi-omap builds
+	 */
+	if (!cpu_is_omap44xx())
+		return -ENODEV;
+
+	/* Static mapping, never released */
+	l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
+	BUG_ON(!l2cache_base);
+
+	/* Enable PL310 L2 Cache controller */
+	omap_smc1(0x102, 0x1);
+
+	/*
+	 * 32KB way size, 16-way associativity,
+	 * parity disabled
+	 */
+	l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
+
+	return 0;
+}
+early_initcall(omap_l2_cache_init);
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap_hwmod_2420_data.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap_hwmod_2420_data.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap_hwmod_2420_data.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap_hwmod_2420_data.c	2010-08-01 18:11:14.000000000 -0400
@@ -125,7 +125,7 @@
 
 /* MPU */
 static struct omap_hwmod omap2420_mpu_hwmod = {
-	.name		= "mpu_hwmod",
+	.name		= "mpu",
 	.class		= &mpu_hwmod_class,
 	.main_clk	= "mpu_ck",
 	.masters	= omap2420_mpu_masters,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap_hwmod_2430_data.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap_hwmod_2430_data.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap_hwmod_2430_data.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap_hwmod_2430_data.c	2010-08-01 18:11:14.000000000 -0400
@@ -127,7 +127,7 @@
 
 /* MPU */
 static struct omap_hwmod omap2430_mpu_hwmod = {
-	.name		= "mpu_hwmod",
+	.name		= "mpu",
 	.class		= &mpu_hwmod_class,
 	.main_clk	= "mpu_ck",
 	.masters	= omap2430_mpu_masters,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c	2010-08-01 18:11:14.000000000 -0400
@@ -156,7 +156,7 @@
 
 /* MPU */
 static struct omap_hwmod omap3xxx_mpu_hwmod = {
-	.name		= "mpu_hwmod",
+	.name		= "mpu",
 	.class		= &mpu_hwmod_class,
 	.main_clk	= "arm_fck",
 	.masters	= omap3xxx_mpu_masters,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap_hwmod.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap_hwmod.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap_hwmod.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap_hwmod.c	2010-08-01 18:11:14.000000000 -0400
@@ -2,12 +2,12 @@
  * omap_hwmod implementation for OMAP2/3/4
  *
  * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- * With fixes and testing from Kevin Hilman
  *
- * Created in collaboration with (alphabetical order): Benoit Cousson,
- * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
- * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ * Paul Walmsley, Benoît Cousson, Kevin Hilman
+ *
+ * Created in collaboration with (alphabetical order): Thara Gopinath,
+ * Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari Poussa, Anand
+ * Sawant, Santosh Shilimkar, Richard Woodruff
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -43,7 +43,6 @@
 #include <linux/err.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
-#include <linux/bootmem.h>
 
 #include <plat/common.h>
 #include <plat/cpu.h>
@@ -58,7 +57,7 @@
 #define MAX_MODULE_RESET_WAIT		10000
 
 /* Name of the OMAP hwmod for the MPU */
-#define MPU_INITIATOR_NAME		"mpu_hwmod"
+#define MPU_INITIATOR_NAME		"mpu"
 
 /* omap_hwmod_list contains all registered struct omap_hwmods */
 static LIST_HEAD(omap_hwmod_list);
@@ -404,21 +403,21 @@
  */
 static int _init_main_clk(struct omap_hwmod *oh)
 {
-	struct clk *c;
 	int ret = 0;
 
 	if (!oh->main_clk)
 		return 0;
 
-	c = omap_clk_get_by_name(oh->main_clk);
-	WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get main_clk %s\n",
-	     oh->name, oh->main_clk);
-	if (IS_ERR(c))
-		ret = -EINVAL;
-	oh->_clk = c;
+	oh->_clk = omap_clk_get_by_name(oh->main_clk);
+	if (!oh->_clk) {
+		pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
+			   oh->name, oh->main_clk);
+		return -EINVAL;
+	}
 
-	WARN(!c->clkdm, "omap_hwmod: %s: missing clockdomain for %s.\n",
-	     oh->main_clk, c->name);
+	if (!oh->_clk->clkdm)
+		pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
+			   oh->main_clk, oh->_clk->name);
 
 	return ret;
 }
@@ -432,7 +431,6 @@
  */
 static int _init_interface_clks(struct omap_hwmod *oh)
 {
-	struct omap_hwmod_ocp_if *os;
 	struct clk *c;
 	int i;
 	int ret = 0;
@@ -440,15 +438,18 @@
 	if (oh->slaves_cnt == 0)
 		return 0;
 
-	for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+	for (i = 0; i < oh->slaves_cnt; i++) {
+		struct omap_hwmod_ocp_if *os = oh->slaves[i];
+
 		if (!os->clk)
 			continue;
 
 		c = omap_clk_get_by_name(os->clk);
-		WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get "
-		     "interface_clk %s\n", oh->name, os->clk);
-		if (IS_ERR(c))
+		if (!c) {
+			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
+				   oh->name, os->clk);
 			ret = -EINVAL;
+		}
 		os->_clk = c;
 	}
 
@@ -471,10 +472,11 @@
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
 		c = omap_clk_get_by_name(oc->clk);
-		WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get opt_clk "
-		     "%s\n", oh->name, oc->clk);
-		if (IS_ERR(c))
+		if (!c) {
+			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
+				   oh->name, oc->clk);
 			ret = -EINVAL;
+		}
 		oc->_clk = c;
 	}
 
@@ -490,19 +492,19 @@
  */
 static int _enable_clocks(struct omap_hwmod *oh)
 {
-	struct omap_hwmod_ocp_if *os;
 	int i;
 
 	pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
 
-	if (oh->_clk && !IS_ERR(oh->_clk))
+	if (oh->_clk)
 		clk_enable(oh->_clk);
 
 	if (oh->slaves_cnt > 0) {
-		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+		for (i = 0; i < oh->slaves_cnt; i++) {
+			struct omap_hwmod_ocp_if *os = oh->slaves[i];
 			struct clk *c = os->_clk;
 
-			if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
+			if (c && (os->flags & OCPIF_SWSUP_IDLE))
 				clk_enable(c);
 		}
 	}
@@ -520,19 +522,19 @@
  */
 static int _disable_clocks(struct omap_hwmod *oh)
 {
-	struct omap_hwmod_ocp_if *os;
 	int i;
 
 	pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
 
-	if (oh->_clk && !IS_ERR(oh->_clk))
+	if (oh->_clk)
 		clk_disable(oh->_clk);
 
 	if (oh->slaves_cnt > 0) {
-		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+		for (i = 0; i < oh->slaves_cnt; i++) {
+			struct omap_hwmod_ocp_if *os = oh->slaves[i];
 			struct clk *c = os->_clk;
 
-			if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE))
+			if (c && (os->flags & OCPIF_SWSUP_IDLE))
 				clk_disable(c);
 		}
 	}
@@ -551,14 +553,15 @@
  */
 static int _find_mpu_port_index(struct omap_hwmod *oh)
 {
-	struct omap_hwmod_ocp_if *os;
 	int i;
 	int found = 0;
 
 	if (!oh || oh->slaves_cnt == 0)
 		return -EINVAL;
 
-	for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+	for (i = 0; i < oh->slaves_cnt; i++) {
+		struct omap_hwmod_ocp_if *os = oh->slaves[i];
+
 		if (os->user & OCP_USER_MPU) {
 			found = 1;
 			break;
@@ -593,7 +596,7 @@
 	if (!oh || oh->slaves_cnt == 0)
 		return NULL;
 
-	os = *oh->slaves + index;
+	os = oh->slaves[index];
 
 	for (i = 0, mem = os->addr; i < os->addr_cnt; i++, mem++) {
 		if (mem->flags & ADDR_TYPE_RT) {
@@ -781,9 +784,10 @@
 	ret |= _init_interface_clks(oh);
 	ret |= _init_opt_clks(oh);
 
-	oh->_state = _HWMOD_STATE_CLKS_INITED;
+	if (!ret)
+		oh->_state = _HWMOD_STATE_CLKS_INITED;
 
-	return ret;
+	return 0;
 }
 
 /**
@@ -806,9 +810,9 @@
 	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
 		return 0;
 
-	os = *oh->slaves + oh->_mpu_port_index;
+	os = oh->slaves[oh->_mpu_port_index];
 
-	if (!(os->flags & OCPIF_HAS_IDLEST))
+	if (oh->flags & HWMOD_NO_IDLEST)
 		return 0;
 
 	/* XXX check module SIDLEMODE */
@@ -819,11 +823,8 @@
 		ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs,
 						 oh->prcm.omap2.idlest_reg_id,
 						 oh->prcm.omap2.idlest_idle_bit);
-#if 0
 	} else if (cpu_is_omap44xx()) {
-		ret = omap4_cm_wait_module_ready(oh->prcm.omap4.module_offs,
-						 oh->prcm.omap4.device_offs);
-#endif
+		ret = omap4_cm_wait_module_ready(oh->prcm.omap4.clkctrl_reg);
 	} else {
 		BUG();
 	};
@@ -912,16 +913,21 @@
 	_add_initiator_dep(oh, mpu_oh);
 	_enable_clocks(oh);
 
-	if (oh->class->sysc) {
-		if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
-			_update_sysc_cache(oh);
-		_sysc_enable(oh);
-	}
-
 	r = _wait_target_ready(oh);
-	if (!r)
+	if (!r) {
 		oh->_state = _HWMOD_STATE_ENABLED;
 
+		/* Access the sysconfig only if the target is ready */
+		if (oh->class->sysc) {
+			if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
+				_update_sysc_cache(oh);
+			_sysc_enable(oh);
+		}
+	} else {
+		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
+			 oh->name, r);
+	}
+
 	return r;
 }
 
@@ -998,18 +1004,18 @@
  */
 static int _setup(struct omap_hwmod *oh)
 {
-	struct omap_hwmod_ocp_if *os;
-	int i;
+	int i, r;
 
 	if (!oh)
 		return -EINVAL;
 
 	/* Set iclk autoidle mode */
 	if (oh->slaves_cnt > 0) {
-		for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) {
+		for (i = 0; i < oh->slaves_cnt; i++) {
+			struct omap_hwmod_ocp_if *os = oh->slaves[i];
 			struct clk *c = os->_clk;
 
-			if (!c || IS_ERR(c))
+			if (!c)
 				continue;
 
 			if (os->flags & OCPIF_SWSUP_IDLE) {
@@ -1023,7 +1029,12 @@
 
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
-	_enable(oh);
+	r = _enable(oh);
+	if (r) {
+		pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
+			   oh->name, oh->_state);
+		return 0;
+	}
 
 	if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
 		/*
@@ -1431,7 +1442,7 @@
 	ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt;
 
 	for (i = 0; i < oh->slaves_cnt; i++)
-		ret += (*oh->slaves + i)->addr_cnt;
+		ret += oh->slaves[i]->addr_cnt;
 
 	return ret;
 }
@@ -1472,7 +1483,7 @@
 	for (i = 0; i < oh->slaves_cnt; i++) {
 		struct omap_hwmod_ocp_if *os;
 
-		os = *oh->slaves + i;
+		os = oh->slaves[i];
 
 		for (j = 0; j < os->addr_cnt; j++) {
 			(res + r)->start = (os->addr + j)->pa_start;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap-iommu.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap-iommu.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap-iommu.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap-iommu.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,157 @@
+/*
+ * omap iommu: omap device registration
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <plat/iommu.h>
+#include <plat/irqs.h>
+
+struct iommu_device {
+	resource_size_t base;
+	int irq;
+	struct iommu_platform_data pdata;
+	struct resource res[2];
+};
+static struct iommu_device *devices;
+static int num_iommu_devices;
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct iommu_device omap3_devices[] = {
+	{
+		.base = 0x480bd400,
+		.irq = 24,
+		.pdata = {
+			.name = "isp",
+			.nr_tlb_entries = 8,
+			.clk_name = "cam_ick",
+		},
+	},
+#if defined(CONFIG_MPU_BRIDGE_IOMMU)
+	{
+		.base = 0x5d000000,
+		.irq = 28,
+		.pdata = {
+			.name = "iva2",
+			.nr_tlb_entries = 32,
+			.clk_name = "iva2_ck",
+		},
+	},
+#endif
+};
+#define NR_OMAP3_IOMMU_DEVICES ARRAY_SIZE(omap3_devices)
+static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES];
+#else
+#define omap3_devices		NULL
+#define NR_OMAP3_IOMMU_DEVICES	0
+#define omap3_iommu_pdev	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static struct iommu_device omap4_devices[] = {
+	{
+		.base = OMAP4_MMU1_BASE,
+		.irq = INT_44XX_DUCATI_MMU_IRQ,
+		.pdata = {
+			.name = "ducati",
+			.nr_tlb_entries = 32,
+			.clk_name = "ducati_ick",
+		},
+	},
+#if defined(CONFIG_MPU_TESLA_IOMMU)
+	{
+		.base = OMAP4_MMU2_BASE,
+		.irq = INT_44XX_DSP_MMU,
+		.pdata = {
+			.name = "tesla",
+			.nr_tlb_entries = 32,
+			.clk_name = "tesla_ick",
+		},
+	},
+#endif
+};
+#define NR_OMAP4_IOMMU_DEVICES ARRAY_SIZE(omap4_devices)
+static struct platform_device *omap4_iommu_pdev[NR_OMAP4_IOMMU_DEVICES];
+#else
+#define omap4_devices		NULL
+#define NR_OMAP4_IOMMU_DEVICES	0
+#define omap4_iommu_pdev	NULL
+#endif
+
+static struct platform_device **omap_iommu_pdev;
+
+static int __init omap_iommu_init(void)
+{
+	int i, err;
+	struct resource res[] = {
+		{ .flags = IORESOURCE_MEM },
+		{ .flags = IORESOURCE_IRQ },
+	};
+
+	if (cpu_is_omap34xx()) {
+		devices = omap3_devices;
+		omap_iommu_pdev = omap3_iommu_pdev;
+		num_iommu_devices = NR_OMAP3_IOMMU_DEVICES;
+	} else if (cpu_is_omap44xx()) {
+		devices = omap4_devices;
+		omap_iommu_pdev = omap4_iommu_pdev;
+		num_iommu_devices = NR_OMAP4_IOMMU_DEVICES;
+	} else
+		return -ENODEV;
+
+	for (i = 0; i < num_iommu_devices; i++) {
+		struct platform_device *pdev;
+		const struct iommu_device *d = &devices[i];
+
+		pdev = platform_device_alloc("omap-iommu", i);
+		if (!pdev) {
+			err = -ENOMEM;
+			goto err_out;
+		}
+
+		res[0].start = d->base;
+		res[0].end = d->base + MMU_REG_SIZE - 1;
+		res[1].start = res[1].end = d->irq;
+
+		err = platform_device_add_resources(pdev, res,
+						    ARRAY_SIZE(res));
+		if (err)
+			goto err_out;
+		err = platform_device_add_data(pdev, &d->pdata,
+					       sizeof(d->pdata));
+		if (err)
+			goto err_out;
+		err = platform_device_add(pdev);
+		if (err)
+			goto err_out;
+		omap_iommu_pdev[i] = pdev;
+	}
+	return 0;
+
+err_out:
+	while (i--)
+		platform_device_put(omap_iommu_pdev[i]);
+	return err;
+}
+module_init(omap_iommu_init);
+
+static void __exit omap_iommu_exit(void)
+{
+	int i;
+
+	for (i = 0; i < num_iommu_devices; i++)
+		platform_device_unregister(omap_iommu_pdev[i]);
+}
+module_exit(omap_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("omap iommu: omap device registration");
+MODULE_LICENSE("GPL v2");
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap-smp.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap-smp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/omap-smp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/omap-smp.c	2010-08-01 18:11:14.000000000 -0400
@@ -24,7 +24,7 @@
 #include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
-#include <plat/common.h>
+#include <mach/omap4-common.h>
 
 /* SCU base address */
 static void __iomem *scu_base;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/pm24xx.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/pm24xx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/pm24xx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/pm24xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -70,8 +70,8 @@
 	f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
 
 	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
-	f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2);
-	f2 &= ~OMAP24XX_EN_UART3;
+	f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK);
+	f2 &= ~OMAP24XX_EN_UART3_MASK;
 
 	if (f1 | f2)
 		return 1;
@@ -107,7 +107,7 @@
 	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
 	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
 
-	omap2_gpio_prepare_for_retention();
+	omap2_gpio_prepare_for_idle(PWRDM_POWER_RET);
 
 	if (omap2_pm_debug) {
 		omap2_pm_dump(0, 0, 0);
@@ -141,7 +141,7 @@
 		tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
 		omap2_pm_dump(0, 1, tmp);
 	}
-	omap2_gpio_resume_after_retention();
+	omap2_gpio_resume_after_idle();
 
 	clk_enable(osc_ck);
 
@@ -170,7 +170,7 @@
 	u32 l;
 
 	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+	return l & (OMAP2420_EN_I2C2_MASK | OMAP2420_EN_I2C1_MASK);
 }
 
 static int sti_console_enabled;
@@ -181,13 +181,13 @@
 
 	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
 	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
-		 OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
-		 OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
+		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
+		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
 		return 0;
 	/* Check for UART3. */
 	l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
-	if (l & OMAP24XX_EN_UART3)
+	if (l & OMAP24XX_EN_UART3_MASK)
 		return 0;
 	if (sti_console_enabled)
 		return 0;
@@ -215,12 +215,12 @@
 
 		/* Try to enter MPU retention */
 		prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
-				  OMAP_LOGICRETSTATE,
+				  OMAP_LOGICRETSTATE_MASK,
 				  MPU_MOD, OMAP2_PM_PWSTCTRL);
 	} else {
 		/* Block MPU retention */
 
-		prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD,
+		prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
 						 OMAP2_PM_PWSTCTRL);
 		only_idle = 1;
 	}
@@ -288,7 +288,8 @@
 	u32 wken_wkup, mir1;
 
 	wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-	prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+	wken_wkup &= ~OMAP24XX_EN_GPT1_MASK;
+	prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
 
 	/* Mask GPT1 */
 	mir1 = omap_readl(0x480fe0a4);
@@ -351,7 +352,7 @@
 	struct powerdomain *pwrdm;
 
 	/* Enable autoidle */
-	prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+	prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD,
 			  OMAP2_PRCM_SYSCONFIG_OFFSET);
 
 	/*
@@ -390,53 +391,54 @@
 	clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
 
 	/* Enable clock autoidle for all domains */
-	cm_write_mod_reg(OMAP24XX_AUTO_CAM |
-			 OMAP24XX_AUTO_MAILBOXES |
-			 OMAP24XX_AUTO_WDT4 |
-			 OMAP2420_AUTO_WDT3 |
-			 OMAP24XX_AUTO_MSPRO |
-			 OMAP2420_AUTO_MMC |
-			 OMAP24XX_AUTO_FAC |
-			 OMAP2420_AUTO_EAC |
-			 OMAP24XX_AUTO_HDQ |
-			 OMAP24XX_AUTO_UART2 |
-			 OMAP24XX_AUTO_UART1 |
-			 OMAP24XX_AUTO_I2C2 |
-			 OMAP24XX_AUTO_I2C1 |
-			 OMAP24XX_AUTO_MCSPI2 |
-			 OMAP24XX_AUTO_MCSPI1 |
-			 OMAP24XX_AUTO_MCBSP2 |
-			 OMAP24XX_AUTO_MCBSP1 |
-			 OMAP24XX_AUTO_GPT12 |
-			 OMAP24XX_AUTO_GPT11 |
-			 OMAP24XX_AUTO_GPT10 |
-			 OMAP24XX_AUTO_GPT9 |
-			 OMAP24XX_AUTO_GPT8 |
-			 OMAP24XX_AUTO_GPT7 |
-			 OMAP24XX_AUTO_GPT6 |
-			 OMAP24XX_AUTO_GPT5 |
-			 OMAP24XX_AUTO_GPT4 |
-			 OMAP24XX_AUTO_GPT3 |
-			 OMAP24XX_AUTO_GPT2 |
-			 OMAP2420_AUTO_VLYNQ |
-			 OMAP24XX_AUTO_DSS,
+	cm_write_mod_reg(OMAP24XX_AUTO_CAM_MASK |
+			 OMAP24XX_AUTO_MAILBOXES_MASK |
+			 OMAP24XX_AUTO_WDT4_MASK |
+			 OMAP2420_AUTO_WDT3_MASK |
+			 OMAP24XX_AUTO_MSPRO_MASK |
+			 OMAP2420_AUTO_MMC_MASK |
+			 OMAP24XX_AUTO_FAC_MASK |
+			 OMAP2420_AUTO_EAC_MASK |
+			 OMAP24XX_AUTO_HDQ_MASK |
+			 OMAP24XX_AUTO_UART2_MASK |
+			 OMAP24XX_AUTO_UART1_MASK |
+			 OMAP24XX_AUTO_I2C2_MASK |
+			 OMAP24XX_AUTO_I2C1_MASK |
+			 OMAP24XX_AUTO_MCSPI2_MASK |
+			 OMAP24XX_AUTO_MCSPI1_MASK |
+			 OMAP24XX_AUTO_MCBSP2_MASK |
+			 OMAP24XX_AUTO_MCBSP1_MASK |
+			 OMAP24XX_AUTO_GPT12_MASK |
+			 OMAP24XX_AUTO_GPT11_MASK |
+			 OMAP24XX_AUTO_GPT10_MASK |
+			 OMAP24XX_AUTO_GPT9_MASK |
+			 OMAP24XX_AUTO_GPT8_MASK |
+			 OMAP24XX_AUTO_GPT7_MASK |
+			 OMAP24XX_AUTO_GPT6_MASK |
+			 OMAP24XX_AUTO_GPT5_MASK |
+			 OMAP24XX_AUTO_GPT4_MASK |
+			 OMAP24XX_AUTO_GPT3_MASK |
+			 OMAP24XX_AUTO_GPT2_MASK |
+			 OMAP2420_AUTO_VLYNQ_MASK |
+			 OMAP24XX_AUTO_DSS_MASK,
 			 CORE_MOD, CM_AUTOIDLE1);
-	cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
-			 OMAP24XX_AUTO_SSI |
-			 OMAP24XX_AUTO_USB,
+	cm_write_mod_reg(OMAP24XX_AUTO_UART3_MASK |
+			 OMAP24XX_AUTO_SSI_MASK |
+			 OMAP24XX_AUTO_USB_MASK,
 			 CORE_MOD, CM_AUTOIDLE2);
-	cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
-			 OMAP24XX_AUTO_GPMC |
-			 OMAP24XX_AUTO_SDMA,
+	cm_write_mod_reg(OMAP24XX_AUTO_SDRC_MASK |
+			 OMAP24XX_AUTO_GPMC_MASK |
+			 OMAP24XX_AUTO_SDMA_MASK,
 			 CORE_MOD, CM_AUTOIDLE3);
-	cm_write_mod_reg(OMAP24XX_AUTO_PKA |
-			 OMAP24XX_AUTO_AES |
-			 OMAP24XX_AUTO_RNG |
-			 OMAP24XX_AUTO_SHA |
-			 OMAP24XX_AUTO_DES,
+	cm_write_mod_reg(OMAP24XX_AUTO_PKA_MASK |
+			 OMAP24XX_AUTO_AES_MASK |
+			 OMAP24XX_AUTO_RNG_MASK |
+			 OMAP24XX_AUTO_SHA_MASK |
+			 OMAP24XX_AUTO_DES_MASK,
 			 CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
 
-	cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+	cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI_MASK, OMAP24XX_DSP_MOD,
+			 CM_AUTOIDLE);
 
 	/* Put DPLL and both APLLs into autoidle mode */
 	cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
@@ -444,12 +446,12 @@
 			 (0x03 << OMAP24XX_AUTO_54M_SHIFT),
 			 PLL_MOD, CM_AUTOIDLE);
 
-	cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
-			 OMAP24XX_AUTO_WDT1 |
-			 OMAP24XX_AUTO_MPU_WDT |
-			 OMAP24XX_AUTO_GPIOS |
-			 OMAP24XX_AUTO_32KSYNC |
-			 OMAP24XX_AUTO_GPT1,
+	cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL_MASK |
+			 OMAP24XX_AUTO_WDT1_MASK |
+			 OMAP24XX_AUTO_MPU_WDT_MASK |
+			 OMAP24XX_AUTO_GPIOS_MASK |
+			 OMAP24XX_AUTO_32KSYNC_MASK |
+			 OMAP24XX_AUTO_GPT1_MASK,
 			 WKUP_MOD, CM_AUTOIDLE);
 
 	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
@@ -460,15 +462,15 @@
 	/* Configure automatic voltage transition */
 	prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
 			  OMAP2_PRCM_VOLTSETUP_OFFSET);
-	prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+	prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT_MASK |
 			  (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
-			  OMAP24XX_MEMRETCTRL |
+			  OMAP24XX_MEMRETCTRL_MASK |
 			  (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
 			  (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
 			  OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
 
 	/* Enable wake-up events */
-	prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+	prm_write_mod_reg(OMAP24XX_EN_GPIOS_MASK | OMAP24XX_EN_GPT1_MASK,
 			  WKUP_MOD, PM_WKEN);
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/pm34xx.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/pm34xx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/pm34xx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/pm34xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -58,6 +58,7 @@
 u32 enable_off_mode;
 u32 sleep_while_idle;
 u32 wakeup_timer_seconds;
+u32 wakeup_timer_milliseconds;
 
 struct power_state {
 	struct powerdomain *pwrdm;
@@ -93,20 +94,21 @@
 	int timeout = 0;
 
 	if (omap_rev() >= OMAP3430_REV_ES3_1) {
-		prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN);
+		prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				     PM_WKEN);
 		/* Do a readback to assure write has been done */
 		prm_read_mod_reg(WKUP_MOD, PM_WKEN);
 
-		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
-			 OMAP3430_ST_IO_CHAIN)) {
+		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
+			 OMAP3430_ST_IO_CHAIN_MASK)) {
 			timeout++;
 			if (timeout > 1000) {
 				printk(KERN_ERR "Wake up daisy chain "
 				       "activation failed.\n");
 				return;
 			}
-			prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN,
-					     WKUP_MOD, PM_WKST);
+			prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
+					     WKUP_MOD, PM_WKEN);
 		}
 	}
 }
@@ -114,7 +116,8 @@
 static void omap3_disable_io_chain(void)
 {
 	if (omap_rev() >= OMAP3430_REV_ES3_1)
-		prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN);
+		prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				       PM_WKEN);
 }
 
 static void omap3_core_save_context(void)
@@ -267,14 +270,18 @@
  */
 static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 {
-	u32 irqstatus_mpu;
+	u32 irqenable_mpu, irqstatus_mpu;
 	int c = 0;
 
-	do {
-		irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
-					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	irqenable_mpu = prm_read_mod_reg(OCP_MOD,
+					 OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+	irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	irqstatus_mpu &= irqenable_mpu;
 
-		if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) {
+	do {
+		if (irqstatus_mpu & (OMAP3430_WKUP_ST_MASK |
+				     OMAP3430_IO_ST_MASK)) {
 			c = _prcm_int_handle_wakeup();
 
 			/*
@@ -292,7 +299,11 @@
 		prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
 					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-	} while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
+		irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+		irqstatus_mpu &= irqenable_mpu;
+
+	} while (irqstatus_mpu);
 
 	return IRQ_HANDLED;
 }
@@ -371,12 +382,19 @@
 	if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
 		pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
 
-	/* PER */
+	/* Enable IO-PAD and IO-CHAIN wakeups */
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
+	if (per_next_state < PWRDM_POWER_ON ||
+			core_next_state < PWRDM_POWER_ON) {
+		prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
+		omap3_enable_io_chain();
+	}
+
+	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(2);
-		omap2_gpio_prepare_for_retention();
+		omap2_gpio_prepare_for_idle(per_next_state);
 		if (per_next_state == PWRDM_POWER_OFF) {
 			if (core_next_state == PWRDM_POWER_ON) {
 				per_next_state = PWRDM_POWER_RET;
@@ -398,10 +416,8 @@
 			omap3_core_save_context();
 			omap3_prcm_save_context();
 		}
-		/* Enable IO-PAD and IO-CHAIN wakeups */
-		prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
-		omap3_enable_io_chain();
 	}
+
 	omap3_intc_prepare_idle();
 
 	/*
@@ -445,7 +461,7 @@
 		omap_uart_resume_idle(0);
 		omap_uart_resume_idle(1);
 		if (core_next_state == PWRDM_POWER_OFF)
-			prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF,
+			prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
 	}
@@ -454,9 +470,9 @@
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
+		omap2_gpio_resume_after_idle();
 		if (per_prev_state == PWRDM_POWER_OFF)
 			omap3_per_restore_context();
-		omap2_gpio_resume_after_retention();
 		omap_uart_resume_idle(2);
 		if (per_state_modified)
 			pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
@@ -464,7 +480,7 @@
 
 	/* Disable IO-PAD and IO-CHAIN wakeup */
 	if (core_next_state < PWRDM_POWER_ON) {
-		prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+		prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
 		omap3_disable_io_chain();
 	}
 
@@ -548,20 +564,21 @@
 #ifdef CONFIG_SUSPEND
 static suspend_state_t suspend_state;
 
-static void omap2_pm_wakeup_on_timer(u32 seconds)
+static void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
 {
 	u32 tick_rate, cycles;
 
-	if (!seconds)
+	if (!seconds && !milliseconds)
 		return;
 
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds;
+	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
 	omap_dm_timer_stop(gptimer_wakeup);
 	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
 
-	pr_info("PM: Resume timer in %d secs (%d ticks at %d ticks/sec.)\n",
-		seconds, cycles, tick_rate);
+	pr_info("PM: Resume timer in %u.%03u secs"
+		" (%d ticks at %d ticks/sec.)\n",
+		seconds, milliseconds, cycles, tick_rate);
 }
 
 static int omap3_pm_prepare(void)
@@ -575,8 +592,9 @@
 	struct power_state *pwrst;
 	int state, ret = 0;
 
-	if (wakeup_timer_seconds)
-		omap2_pm_wakeup_on_timer(wakeup_timer_seconds);
+	if (wakeup_timer_seconds || wakeup_timer_milliseconds)
+		omap2_pm_wakeup_on_timer(wakeup_timer_seconds,
+					 wakeup_timer_milliseconds);
 
 	/* Read current next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node)
@@ -683,9 +701,9 @@
 		return;
 
 	/* Reset IVA2 */
-	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
-			  OMAP3430_RST2_IVA2 |
-			  OMAP3430_RST3_IVA2,
+	prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+			  OMAP3430_RST2_IVA2_MASK |
+			  OMAP3430_RST3_IVA2_MASK,
 			  OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 
 	/* Enable IVA2 clock */
@@ -703,9 +721,9 @@
 	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
 
 	/* Reset IVA2 */
-	prm_write_mod_reg(OMAP3430_RST1_IVA2 |
-			  OMAP3430_RST2_IVA2 |
-			  OMAP3430_RST3_IVA2,
+	prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+			  OMAP3430_RST2_IVA2_MASK |
+			  OMAP3430_RST3_IVA2_MASK,
 			  OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 }
 
@@ -727,8 +745,8 @@
 	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
 
 	/* reset modem */
-	prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
-			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
+	prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
+			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
 			  CORE_MOD, OMAP2_RM_RSTCTRL);
 	prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
 }
@@ -754,102 +772,102 @@
 	 * Note that in the long run this should be done by clockfw
 	 */
 	cm_write_mod_reg(
-		OMAP3430_AUTO_MODEM |
-		OMAP3430ES2_AUTO_MMC3 |
-		OMAP3430ES2_AUTO_ICR |
-		OMAP3430_AUTO_AES2 |
-		OMAP3430_AUTO_SHA12 |
-		OMAP3430_AUTO_DES2 |
-		OMAP3430_AUTO_MMC2 |
-		OMAP3430_AUTO_MMC1 |
-		OMAP3430_AUTO_MSPRO |
-		OMAP3430_AUTO_HDQ |
-		OMAP3430_AUTO_MCSPI4 |
-		OMAP3430_AUTO_MCSPI3 |
-		OMAP3430_AUTO_MCSPI2 |
-		OMAP3430_AUTO_MCSPI1 |
-		OMAP3430_AUTO_I2C3 |
-		OMAP3430_AUTO_I2C2 |
-		OMAP3430_AUTO_I2C1 |
-		OMAP3430_AUTO_UART2 |
-		OMAP3430_AUTO_UART1 |
-		OMAP3430_AUTO_GPT11 |
-		OMAP3430_AUTO_GPT10 |
-		OMAP3430_AUTO_MCBSP5 |
-		OMAP3430_AUTO_MCBSP1 |
-		OMAP3430ES1_AUTO_FAC | /* This is es1 only */
-		OMAP3430_AUTO_MAILBOXES |
-		OMAP3430_AUTO_OMAPCTRL |
-		OMAP3430ES1_AUTO_FSHOSTUSB |
-		OMAP3430_AUTO_HSOTGUSB |
-		OMAP3430_AUTO_SAD2D |
-		OMAP3430_AUTO_SSI,
+		OMAP3430_AUTO_MODEM_MASK |
+		OMAP3430ES2_AUTO_MMC3_MASK |
+		OMAP3430ES2_AUTO_ICR_MASK |
+		OMAP3430_AUTO_AES2_MASK |
+		OMAP3430_AUTO_SHA12_MASK |
+		OMAP3430_AUTO_DES2_MASK |
+		OMAP3430_AUTO_MMC2_MASK |
+		OMAP3430_AUTO_MMC1_MASK |
+		OMAP3430_AUTO_MSPRO_MASK |
+		OMAP3430_AUTO_HDQ_MASK |
+		OMAP3430_AUTO_MCSPI4_MASK |
+		OMAP3430_AUTO_MCSPI3_MASK |
+		OMAP3430_AUTO_MCSPI2_MASK |
+		OMAP3430_AUTO_MCSPI1_MASK |
+		OMAP3430_AUTO_I2C3_MASK |
+		OMAP3430_AUTO_I2C2_MASK |
+		OMAP3430_AUTO_I2C1_MASK |
+		OMAP3430_AUTO_UART2_MASK |
+		OMAP3430_AUTO_UART1_MASK |
+		OMAP3430_AUTO_GPT11_MASK |
+		OMAP3430_AUTO_GPT10_MASK |
+		OMAP3430_AUTO_MCBSP5_MASK |
+		OMAP3430_AUTO_MCBSP1_MASK |
+		OMAP3430ES1_AUTO_FAC_MASK | /* This is es1 only */
+		OMAP3430_AUTO_MAILBOXES_MASK |
+		OMAP3430_AUTO_OMAPCTRL_MASK |
+		OMAP3430ES1_AUTO_FSHOSTUSB_MASK |
+		OMAP3430_AUTO_HSOTGUSB_MASK |
+		OMAP3430_AUTO_SAD2D_MASK |
+		OMAP3430_AUTO_SSI_MASK,
 		CORE_MOD, CM_AUTOIDLE1);
 
 	cm_write_mod_reg(
-		OMAP3430_AUTO_PKA |
-		OMAP3430_AUTO_AES1 |
-		OMAP3430_AUTO_RNG |
-		OMAP3430_AUTO_SHA11 |
-		OMAP3430_AUTO_DES1,
+		OMAP3430_AUTO_PKA_MASK |
+		OMAP3430_AUTO_AES1_MASK |
+		OMAP3430_AUTO_RNG_MASK |
+		OMAP3430_AUTO_SHA11_MASK |
+		OMAP3430_AUTO_DES1_MASK,
 		CORE_MOD, CM_AUTOIDLE2);
 
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
 		cm_write_mod_reg(
-			OMAP3430_AUTO_MAD2D |
-			OMAP3430ES2_AUTO_USBTLL,
+			OMAP3430_AUTO_MAD2D_MASK |
+			OMAP3430ES2_AUTO_USBTLL_MASK,
 			CORE_MOD, CM_AUTOIDLE3);
 	}
 
 	cm_write_mod_reg(
-		OMAP3430_AUTO_WDT2 |
-		OMAP3430_AUTO_WDT1 |
-		OMAP3430_AUTO_GPIO1 |
-		OMAP3430_AUTO_32KSYNC |
-		OMAP3430_AUTO_GPT12 |
-		OMAP3430_AUTO_GPT1 ,
+		OMAP3430_AUTO_WDT2_MASK |
+		OMAP3430_AUTO_WDT1_MASK |
+		OMAP3430_AUTO_GPIO1_MASK |
+		OMAP3430_AUTO_32KSYNC_MASK |
+		OMAP3430_AUTO_GPT12_MASK |
+		OMAP3430_AUTO_GPT1_MASK,
 		WKUP_MOD, CM_AUTOIDLE);
 
 	cm_write_mod_reg(
-		OMAP3430_AUTO_DSS,
+		OMAP3430_AUTO_DSS_MASK,
 		OMAP3430_DSS_MOD,
 		CM_AUTOIDLE);
 
 	cm_write_mod_reg(
-		OMAP3430_AUTO_CAM,
+		OMAP3430_AUTO_CAM_MASK,
 		OMAP3430_CAM_MOD,
 		CM_AUTOIDLE);
 
 	cm_write_mod_reg(
-		OMAP3430_AUTO_GPIO6 |
-		OMAP3430_AUTO_GPIO5 |
-		OMAP3430_AUTO_GPIO4 |
-		OMAP3430_AUTO_GPIO3 |
-		OMAP3430_AUTO_GPIO2 |
-		OMAP3430_AUTO_WDT3 |
-		OMAP3430_AUTO_UART3 |
-		OMAP3430_AUTO_GPT9 |
-		OMAP3430_AUTO_GPT8 |
-		OMAP3430_AUTO_GPT7 |
-		OMAP3430_AUTO_GPT6 |
-		OMAP3430_AUTO_GPT5 |
-		OMAP3430_AUTO_GPT4 |
-		OMAP3430_AUTO_GPT3 |
-		OMAP3430_AUTO_GPT2 |
-		OMAP3430_AUTO_MCBSP4 |
-		OMAP3430_AUTO_MCBSP3 |
-		OMAP3430_AUTO_MCBSP2,
+		OMAP3430_AUTO_GPIO6_MASK |
+		OMAP3430_AUTO_GPIO5_MASK |
+		OMAP3430_AUTO_GPIO4_MASK |
+		OMAP3430_AUTO_GPIO3_MASK |
+		OMAP3430_AUTO_GPIO2_MASK |
+		OMAP3430_AUTO_WDT3_MASK |
+		OMAP3430_AUTO_UART3_MASK |
+		OMAP3430_AUTO_GPT9_MASK |
+		OMAP3430_AUTO_GPT8_MASK |
+		OMAP3430_AUTO_GPT7_MASK |
+		OMAP3430_AUTO_GPT6_MASK |
+		OMAP3430_AUTO_GPT5_MASK |
+		OMAP3430_AUTO_GPT4_MASK |
+		OMAP3430_AUTO_GPT3_MASK |
+		OMAP3430_AUTO_GPT2_MASK |
+		OMAP3430_AUTO_MCBSP4_MASK |
+		OMAP3430_AUTO_MCBSP3_MASK |
+		OMAP3430_AUTO_MCBSP2_MASK,
 		OMAP3430_PER_MOD,
 		CM_AUTOIDLE);
 
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
 		cm_write_mod_reg(
-			OMAP3430ES2_AUTO_USBHOST,
+			OMAP3430ES2_AUTO_USBHOST_MASK,
 			OMAP3430ES2_USBHOST_MOD,
 			CM_AUTOIDLE);
 	}
 
-	omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
+	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
 
 	/*
 	 * Set all plls to autoidle. This is needed until autoidle is
@@ -879,35 +897,40 @@
 			     OMAP3_PRM_CLKSRC_CTRL_OFFSET);
 
 	/* setup wakup source */
-	prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
-			  OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+	prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
+			  OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
 			  WKUP_MOD, PM_WKEN);
 	/* No need to write EN_IO, that is always enabled */
-	prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
-			  OMAP3430_EN_GPT12,
+	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
+			  OMAP3430_GRPSEL_GPT1_MASK |
+			  OMAP3430_GRPSEL_GPT12_MASK,
 			  WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
 	/* For some reason IO doesn't generate wakeup event even if
 	 * it is selected to mpu wakeup goup */
-	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+	prm_write_mod_reg(OMAP3430_IO_EN_MASK | OMAP3430_WKUP_EN_MASK,
 			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
 	/* Enable PM_WKEN to support DSS LPR */
-	prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
+	prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
 				OMAP3430_DSS_MOD, PM_WKEN);
 
 	/* Enable wakeups in PER */
-	prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
-			  OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
-			  OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
-			  OMAP3430_EN_MCBSP4,
+	prm_write_mod_reg(OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
+			  OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
+			  OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
+			  OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
+			  OMAP3430_EN_MCBSP4_MASK,
 			  OMAP3430_PER_MOD, PM_WKEN);
 	/* and allow them to wake up MPU */
-	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
-			  OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
-			  OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
-			  OMAP3430_EN_MCBSP4,
+	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2_MASK |
+			  OMAP3430_GRPSEL_GPIO3_MASK |
+			  OMAP3430_GRPSEL_GPIO4_MASK |
+			  OMAP3430_GRPSEL_GPIO5_MASK |
+			  OMAP3430_GRPSEL_GPIO6_MASK |
+			  OMAP3430_GRPSEL_UART3_MASK |
+			  OMAP3430_GRPSEL_MCBSP2_MASK |
+			  OMAP3430_GRPSEL_MCBSP3_MASK |
+			  OMAP3430_GRPSEL_MCBSP4_MASK,
 			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 
 	/* Don't attach IVA interrupts */
@@ -1080,14 +1103,6 @@
 	omap3_idle_init();
 
 	clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
-	/*
-	 * REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for
-	 * IO-pad wakeup.  Otherwise it will unnecessarily waste power
-	 * waking up PER with every CORE wakeup - see
-	 * http://marc.info/?l=linux-omap&m=121852150710062&w=2
-	*/
-	clkdm_add_wkdep(per_clkdm, core_clkdm);
-
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 		omap3_secure_ram_storage =
 			kmalloc(0x803F, GFP_KERNEL);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/pm-debug.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/pm-debug.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/pm-debug.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/pm-debug.c	2010-08-01 18:11:14.000000000 -0400
@@ -548,6 +548,9 @@
 {
 	u32 *option = data;
 
+	if (option == &wakeup_timer_milliseconds && val >= 1000)
+		return -EINVAL;
+
 	*option = val;
 
 	if (option == &enable_off_mode)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/pm.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/pm.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/pm.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/pm.h	2010-08-01 18:11:14.000000000 -0400
@@ -43,6 +43,7 @@
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
 
 extern u32 wakeup_timer_seconds;
+extern u32 wakeup_timer_milliseconds;
 extern struct omap_dm_timer *gptimer_wakeup;
 
 #ifdef CONFIG_PM_DEBUG
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/powerdomain.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/powerdomain.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/powerdomain.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/powerdomain.c	2010-08-01 18:11:14.000000000 -0400
@@ -5,8 +5,8 @@
  * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
- *
  * Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
+ * State counting code by Tero Kristo <tero.kristo@nokia.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -64,10 +64,10 @@
 #define OMAP_MEM4_ONSTATE_MASK OMAP4430_OCP_NRET_BANK_ONSTATE_MASK
 
 /* OMAP3 and OMAP4 Memory Retstate Masks (common across all power domains) */
-#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE
-#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE
-#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE
-#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE
+#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK
+#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE_MASK
+#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK
+#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE_MASK
 #define OMAP_MEM4_RETSTATE_MASK OMAP4430_OCP_NRET_BANK_RETSTATE_MASK
 
 /* OMAP3 and OMAP4 Memory Status bits */
@@ -511,6 +511,8 @@
  */
 int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
 {
+	u32 v;
+
 	if (!pwrdm)
 		return -EINVAL;
 
@@ -526,9 +528,9 @@
 	 * but the type of value returned is the same for each
 	 * powerdomain.
 	 */
-	prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE,
-			     (pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE)),
-				 pwrdm->prcm_offs, pwrstctrl_reg_offs);
+	v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
+	prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
+			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
 
 	return 0;
 }
@@ -676,8 +678,8 @@
 	if (!pwrdm)
 		return -EINVAL;
 
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs,
-				 pwrstst_reg_offs, OMAP3430_LOGICSTATEST);
+	return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstst_reg_offs,
+				       OMAP3430_LOGICSTATEST_MASK);
 }
 
 /**
@@ -700,7 +702,7 @@
 	 * powerdomain.
 	 */
 	return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
-					OMAP3430_LASTLOGICSTATEENTERED);
+					OMAP3430_LASTLOGICSTATEENTERED_MASK);
 }
 
 /**
@@ -723,7 +725,7 @@
 	 * powerdomain.
 	 */
 	return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstctrl_reg_offs,
-					OMAP3430_LOGICSTATEST);
+				       OMAP3430_LOGICSTATEST_MASK);
 }
 
 /**
@@ -978,6 +980,34 @@
 }
 
 /**
+ * pwrdm_set_lowpwrstchange - Request a low power state change
+ * @pwrdm: struct powerdomain *
+ *
+ * Allows a powerdomain to transtion to a lower power sleep state
+ * from an existing sleep state without waking up the powerdomain.
+ * Returns -EINVAL if the powerdomain pointer is null or if the
+ * powerdomain does not support LOWPOWERSTATECHANGE, or returns 0
+ * upon success.
+ */
+int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+	if (!pwrdm)
+		return -EINVAL;
+
+	if (!(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE))
+		return -EINVAL;
+
+	pr_debug("powerdomain: %s: setting LOWPOWERSTATECHANGE bit\n",
+		 pwrdm->name);
+
+	prm_rmw_mod_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
+			     (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
+			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
+
+	return 0;
+}
+
+/**
  * pwrdm_wait_transition - wait for powerdomain power transition to finish
  * @pwrdm: struct powerdomain * to wait for
  *
@@ -1002,7 +1032,7 @@
 
 	/* XXX Is this udelay() value meaningful? */
 	while ((prm_read_mod_reg(pwrdm->prcm_offs, pwrstst_reg_offs) &
-		OMAP_INTRANSITION) &&
+		OMAP_INTRANSITION_MASK) &&
 	       (c++ < PWRDM_TRANSITION_BAILOUT))
 			udelay(1);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/powerdomains44xx.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/powerdomains44xx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/powerdomains44xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/powerdomains44xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,12 +1,12 @@
 /*
  * OMAP4 Power domains framework
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Abhijit Pagare (abhijitpagare@ti.com)
  * Benoit Cousson (b-cousson@ti.com)
- * Paul Walmsley
+ * Paul Walmsley (paul@pwsan.com)
  *
  * This file is automatically generated from the OMAP hardware databases.
  * We respectfully ask that any modifications to this file be coordinated
@@ -54,6 +54,7 @@
 		[3] = PWRDM_POWER_ON,	/* ducati_l2ram */
 		[4] = PWRDM_POWER_ON,	/* ducati_unicache */
 	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
 
 /* gfx_44xx_pwrdm: 3D accelerator power domain */
@@ -69,6 +70,7 @@
 	.pwrsts_mem_on	= {
 		[0] = PWRDM_POWER_ON,	/* gfx_mem */
 	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
 
 /* abe_44xx_pwrdm: Audio back end power domain */
@@ -87,6 +89,7 @@
 		[0] = PWRDM_POWER_ON,	/* aessmem */
 		[1] = PWRDM_POWER_ON,	/* periphmem */
 	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
 
 /* dss_44xx_pwrdm: Display subsystem power domain */
@@ -103,6 +106,7 @@
 	.pwrsts_mem_on	= {
 		[0] = PWRDM_POWER_ON,	/* dss_mem */
 	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
 
 /* tesla_44xx_pwrdm: Tesla processor power domain */
@@ -123,6 +127,7 @@
 		[1] = PWRDM_POWER_ON,	/* tesla_l1 */
 		[2] = PWRDM_POWER_ON,	/* tesla_l2 */
 	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
 
 /* wkup_44xx_pwrdm: Wake-up power domain */
@@ -130,7 +135,7 @@
 	.name		  = "wkup_pwrdm",
 	.prcm_offs	  = OMAP4430_PRM_WKUP_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
-	.pwrsts		  = PWRDM_POWER_ON,
+	.pwrsts		  = PWRSTS_ON,
 	.banks		  = 1,
 	.pwrsts_mem_ret	= {
 		[0] = PWRDM_POWER_OFF,	/* wkup_bank */
@@ -143,7 +148,7 @@
 /* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */
 static struct powerdomain cpu0_44xx_pwrdm = {
 	.name		  = "cpu0_pwrdm",
-	.prcm_offs	  = OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD,
+	.prcm_offs	  = OMAP4430_PRCM_MPU_CPU0_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
@@ -159,7 +164,7 @@
 /* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
 static struct powerdomain cpu1_44xx_pwrdm = {
 	.name		  = "cpu1_pwrdm",
-	.prcm_offs	  = OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD,
+	.prcm_offs	  = OMAP4430_PRCM_MPU_CPU1_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
@@ -227,6 +232,7 @@
 		[2] = PWRDM_POWER_ON,	/* tcm1_mem */
 		[3] = PWRDM_POWER_ON,	/* tcm2_mem */
 	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
 
 /* cam_44xx_pwrdm: Camera subsystem power domain */
@@ -242,6 +248,7 @@
 	.pwrsts_mem_on	= {
 		[0] = PWRDM_POWER_ON,	/* cam_mem */
 	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
 
 /* l3init_44xx_pwrdm: L3 initators pheripherals power domain  */
@@ -258,6 +265,7 @@
 	.pwrsts_mem_on	= {
 		[0] = PWRDM_POWER_ON,	/* l3init_bank1 */
 	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
 
 /* l4per_44xx_pwrdm: Target peripherals power domain */
@@ -276,6 +284,7 @@
 		[0] = PWRDM_POWER_ON,	/* nonretained_bank */
 		[1] = PWRDM_POWER_ON,	/* retained_bank */
 	},
+	.flags		= PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
 
 /*
@@ -286,7 +295,7 @@
 	.name		  = "always_on_core_pwrdm",
 	.prcm_offs	  = OMAP4430_PRM_ALWAYS_ON_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
-	.pwrsts		  = PWRDM_POWER_ON,
+	.pwrsts		  = PWRSTS_ON,
 };
 
 /* cefuse_44xx_pwrdm: Customer efuse controller power domain */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/prcm.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/prcm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/prcm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/prcm.c	2010-08-01 18:11:14.000000000 -0400
@@ -158,10 +158,10 @@
 		WARN_ON(1);
 
 	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs,
+		prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
 						 OMAP2_RM_RSTCTRL);
 	if (cpu_is_omap44xx())
-		prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs,
+		prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
 						 OMAP4_RM_RSTCTRL);
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/prcm-common.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/prcm-common.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/prcm-common.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/prcm-common.h	2010-08-01 18:11:14.000000000 -0400
@@ -112,83 +112,75 @@
 
 #define OMAP4430_SCRM_SCRM_MOD	0x0000
 
-/* CHIRONSS instances */
-
-#define OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD	0x0000
-#define OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD	0x0200
-#define OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD		0x0400
-#define OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD		0x0800
-
-/* Base Addresses for the OMAP4 */
+/* PRCM_MPU instances */
 
-#define OMAP4430_CM1_BASE		0x4a004000
-#define OMAP4430_CM2_BASE		0x4a008000
-#define OMAP4430_PRM_BASE		0x4a306000
-#define OMAP4430_SCRM_BASE		0x4a30a000
-#define OMAP4430_CHIRONSS_BASE		0x48243000
+#define OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_MOD	0x0000
+#define OMAP4430_PRCM_MPU_DEVICE_PRM_MOD	0x0200
+#define OMAP4430_PRCM_MPU_CPU0_MOD		0x0400
+#define OMAP4430_PRCM_MPU_CPU1_MOD		0x0800
 
 
 /* 24XX register bits shared between CM & PRM registers */
 
 /* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
 #define OMAP2420_EN_MMC_SHIFT				26
-#define OMAP2420_EN_MMC					(1 << 26)
+#define OMAP2420_EN_MMC_MASK				(1 << 26)
 #define OMAP24XX_EN_UART2_SHIFT				22
-#define OMAP24XX_EN_UART2				(1 << 22)
+#define OMAP24XX_EN_UART2_MASK				(1 << 22)
 #define OMAP24XX_EN_UART1_SHIFT				21
-#define OMAP24XX_EN_UART1				(1 << 21)
+#define OMAP24XX_EN_UART1_MASK				(1 << 21)
 #define OMAP24XX_EN_MCSPI2_SHIFT			18
-#define OMAP24XX_EN_MCSPI2				(1 << 18)
+#define OMAP24XX_EN_MCSPI2_MASK				(1 << 18)
 #define OMAP24XX_EN_MCSPI1_SHIFT			17
-#define OMAP24XX_EN_MCSPI1				(1 << 17)
+#define OMAP24XX_EN_MCSPI1_MASK				(1 << 17)
 #define OMAP24XX_EN_MCBSP2_SHIFT			16
-#define OMAP24XX_EN_MCBSP2				(1 << 16)
+#define OMAP24XX_EN_MCBSP2_MASK				(1 << 16)
 #define OMAP24XX_EN_MCBSP1_SHIFT			15
-#define OMAP24XX_EN_MCBSP1				(1 << 15)
+#define OMAP24XX_EN_MCBSP1_MASK				(1 << 15)
 #define OMAP24XX_EN_GPT12_SHIFT				14
-#define OMAP24XX_EN_GPT12				(1 << 14)
+#define OMAP24XX_EN_GPT12_MASK				(1 << 14)
 #define OMAP24XX_EN_GPT11_SHIFT				13
-#define OMAP24XX_EN_GPT11				(1 << 13)
+#define OMAP24XX_EN_GPT11_MASK				(1 << 13)
 #define OMAP24XX_EN_GPT10_SHIFT				12
-#define OMAP24XX_EN_GPT10				(1 << 12)
+#define OMAP24XX_EN_GPT10_MASK				(1 << 12)
 #define OMAP24XX_EN_GPT9_SHIFT				11
-#define OMAP24XX_EN_GPT9				(1 << 11)
+#define OMAP24XX_EN_GPT9_MASK				(1 << 11)
 #define OMAP24XX_EN_GPT8_SHIFT				10
-#define OMAP24XX_EN_GPT8				(1 << 10)
+#define OMAP24XX_EN_GPT8_MASK				(1 << 10)
 #define OMAP24XX_EN_GPT7_SHIFT				9
-#define OMAP24XX_EN_GPT7				(1 << 9)
+#define OMAP24XX_EN_GPT7_MASK				(1 << 9)
 #define OMAP24XX_EN_GPT6_SHIFT				8
-#define OMAP24XX_EN_GPT6				(1 << 8)
+#define OMAP24XX_EN_GPT6_MASK				(1 << 8)
 #define OMAP24XX_EN_GPT5_SHIFT				7
-#define OMAP24XX_EN_GPT5				(1 << 7)
+#define OMAP24XX_EN_GPT5_MASK				(1 << 7)
 #define OMAP24XX_EN_GPT4_SHIFT				6
-#define OMAP24XX_EN_GPT4				(1 << 6)
+#define OMAP24XX_EN_GPT4_MASK				(1 << 6)
 #define OMAP24XX_EN_GPT3_SHIFT				5
-#define OMAP24XX_EN_GPT3				(1 << 5)
+#define OMAP24XX_EN_GPT3_MASK				(1 << 5)
 #define OMAP24XX_EN_GPT2_SHIFT				4
-#define OMAP24XX_EN_GPT2				(1 << 4)
+#define OMAP24XX_EN_GPT2_MASK				(1 << 4)
 #define OMAP2420_EN_VLYNQ_SHIFT				3
-#define OMAP2420_EN_VLYNQ				(1 << 3)
+#define OMAP2420_EN_VLYNQ_MASK				(1 << 3)
 
 /* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
 #define OMAP2430_EN_GPIO5_SHIFT				10
-#define OMAP2430_EN_GPIO5				(1 << 10)
+#define OMAP2430_EN_GPIO5_MASK				(1 << 10)
 #define OMAP2430_EN_MCSPI3_SHIFT			9
-#define OMAP2430_EN_MCSPI3				(1 << 9)
+#define OMAP2430_EN_MCSPI3_MASK				(1 << 9)
 #define OMAP2430_EN_MMCHS2_SHIFT			8
-#define OMAP2430_EN_MMCHS2				(1 << 8)
+#define OMAP2430_EN_MMCHS2_MASK				(1 << 8)
 #define OMAP2430_EN_MMCHS1_SHIFT			7
-#define OMAP2430_EN_MMCHS1				(1 << 7)
+#define OMAP2430_EN_MMCHS1_MASK				(1 << 7)
 #define OMAP24XX_EN_UART3_SHIFT				2
-#define OMAP24XX_EN_UART3				(1 << 2)
+#define OMAP24XX_EN_UART3_MASK				(1 << 2)
 #define OMAP24XX_EN_USB_SHIFT				0
-#define OMAP24XX_EN_USB					(1 << 0)
+#define OMAP24XX_EN_USB_MASK				(1 << 0)
 
 /* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
 #define OMAP2430_EN_MDM_INTC_SHIFT			11
-#define OMAP2430_EN_MDM_INTC				(1 << 11)
+#define OMAP2430_EN_MDM_INTC_MASK			(1 << 11)
 #define OMAP2430_EN_USBHS_SHIFT				6
-#define OMAP2430_EN_USBHS				(1 << 6)
+#define OMAP2430_EN_USBHS_MASK				(1 << 6)
 
 /* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
 #define OMAP2420_ST_MMC_SHIFT				26
@@ -246,9 +238,9 @@
 
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
 #define OMAP24XX_EN_GPIOS_SHIFT				2
-#define OMAP24XX_EN_GPIOS				(1 << 2)
+#define OMAP24XX_EN_GPIOS_MASK				(1 << 2)
 #define OMAP24XX_EN_GPT1_SHIFT				0
-#define OMAP24XX_EN_GPT1				(1 << 0)
+#define OMAP24XX_EN_GPT1_MASK				(1 << 0)
 
 /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
 #define OMAP24XX_ST_GPIOS_SHIFT				(1 << 2)
@@ -267,47 +259,47 @@
 #define OMAP3430_REV_MASK				(0xff << 0)
 
 /* CM_SYSCONFIG, PRM_SYSCONFIG shared bits */
-#define OMAP3430_AUTOIDLE				(1 << 0)
+#define OMAP3430_AUTOIDLE_MASK				(1 << 0)
 
 /* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
-#define OMAP3430_EN_MMC2				(1 << 25)
+#define OMAP3430_EN_MMC2_MASK				(1 << 25)
 #define OMAP3430_EN_MMC2_SHIFT				25
-#define OMAP3430_EN_MMC1				(1 << 24)
+#define OMAP3430_EN_MMC1_MASK				(1 << 24)
 #define OMAP3430_EN_MMC1_SHIFT				24
-#define OMAP3430_EN_MCSPI4				(1 << 21)
+#define OMAP3430_EN_MCSPI4_MASK				(1 << 21)
 #define OMAP3430_EN_MCSPI4_SHIFT			21
-#define OMAP3430_EN_MCSPI3				(1 << 20)
+#define OMAP3430_EN_MCSPI3_MASK				(1 << 20)
 #define OMAP3430_EN_MCSPI3_SHIFT			20
-#define OMAP3430_EN_MCSPI2				(1 << 19)
+#define OMAP3430_EN_MCSPI2_MASK				(1 << 19)
 #define OMAP3430_EN_MCSPI2_SHIFT			19
-#define OMAP3430_EN_MCSPI1				(1 << 18)
+#define OMAP3430_EN_MCSPI1_MASK				(1 << 18)
 #define OMAP3430_EN_MCSPI1_SHIFT			18
-#define OMAP3430_EN_I2C3				(1 << 17)
+#define OMAP3430_EN_I2C3_MASK				(1 << 17)
 #define OMAP3430_EN_I2C3_SHIFT				17
-#define OMAP3430_EN_I2C2				(1 << 16)
+#define OMAP3430_EN_I2C2_MASK				(1 << 16)
 #define OMAP3430_EN_I2C2_SHIFT				16
-#define OMAP3430_EN_I2C1				(1 << 15)
+#define OMAP3430_EN_I2C1_MASK				(1 << 15)
 #define OMAP3430_EN_I2C1_SHIFT				15
-#define OMAP3430_EN_UART2				(1 << 14)
+#define OMAP3430_EN_UART2_MASK				(1 << 14)
 #define OMAP3430_EN_UART2_SHIFT				14
-#define OMAP3430_EN_UART1				(1 << 13)
+#define OMAP3430_EN_UART1_MASK				(1 << 13)
 #define OMAP3430_EN_UART1_SHIFT				13
-#define OMAP3430_EN_GPT11				(1 << 12)
+#define OMAP3430_EN_GPT11_MASK				(1 << 12)
 #define OMAP3430_EN_GPT11_SHIFT				12
-#define OMAP3430_EN_GPT10				(1 << 11)
+#define OMAP3430_EN_GPT10_MASK				(1 << 11)
 #define OMAP3430_EN_GPT10_SHIFT				11
-#define OMAP3430_EN_MCBSP5				(1 << 10)
+#define OMAP3430_EN_MCBSP5_MASK				(1 << 10)
 #define OMAP3430_EN_MCBSP5_SHIFT			10
-#define OMAP3430_EN_MCBSP1				(1 << 9)
+#define OMAP3430_EN_MCBSP1_MASK				(1 << 9)
 #define OMAP3430_EN_MCBSP1_SHIFT			9
-#define OMAP3430_EN_FSHOSTUSB				(1 << 5)
+#define OMAP3430_EN_FSHOSTUSB_MASK			(1 << 5)
 #define OMAP3430_EN_FSHOSTUSB_SHIFT			5
-#define OMAP3430_EN_D2D					(1 << 3)
+#define OMAP3430_EN_D2D_MASK				(1 << 3)
 #define OMAP3430_EN_D2D_SHIFT				3
 
 /* CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
-#define OMAP3430_EN_HSOTGUSB				(1 << 4)
-#define OMAP3430_EN_HSOTGUSB_SHIFT				4
+#define OMAP3430_EN_HSOTGUSB_MASK			(1 << 4)
+#define OMAP3430_EN_HSOTGUSB_SHIFT			4
 
 /* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */
 #define OMAP3430_ST_MMC2_SHIFT				25
@@ -352,21 +344,21 @@
 #define OMAP3430_ST_D2D_MASK				(1 << 3)
 
 /* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP3430_EN_GPIO1				(1 << 3)
+#define OMAP3430_EN_GPIO1_MASK				(1 << 3)
 #define OMAP3430_EN_GPIO1_SHIFT				3
-#define OMAP3430_EN_GPT12				(1 << 1)
+#define OMAP3430_EN_GPT12_MASK				(1 << 1)
 #define OMAP3430_EN_GPT12_SHIFT				1
-#define OMAP3430_EN_GPT1				(1 << 0)
+#define OMAP3430_EN_GPT1_MASK				(1 << 0)
 #define OMAP3430_EN_GPT1_SHIFT				0
 
 /* CM_FCLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP3430_EN_SR2					(1 << 7)
+#define OMAP3430_EN_SR2_MASK				(1 << 7)
 #define OMAP3430_EN_SR2_SHIFT				7
-#define OMAP3430_EN_SR1					(1 << 6)
+#define OMAP3430_EN_SR1_MASK				(1 << 6)
 #define OMAP3430_EN_SR1_SHIFT				6
 
 /* CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
-#define OMAP3430_EN_GPT12				(1 << 1)
+#define OMAP3430_EN_GPT12_MASK				(1 << 1)
 #define OMAP3430_EN_GPT12_SHIFT				1
 
 /* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */
@@ -386,47 +378,47 @@
  * CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_GFX,
  * PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits
  */
-#define OMAP3430_EN_MPU					(1 << 1)
+#define OMAP3430_EN_MPU_MASK				(1 << 1)
 #define OMAP3430_EN_MPU_SHIFT				1
 
 /* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */
-#define OMAP3430_EN_GPIO6				(1 << 17)
+#define OMAP3430_EN_GPIO6_MASK				(1 << 17)
 #define OMAP3430_EN_GPIO6_SHIFT				17
-#define OMAP3430_EN_GPIO5				(1 << 16)
+#define OMAP3430_EN_GPIO5_MASK				(1 << 16)
 #define OMAP3430_EN_GPIO5_SHIFT				16
-#define OMAP3430_EN_GPIO4				(1 << 15)
+#define OMAP3430_EN_GPIO4_MASK				(1 << 15)
 #define OMAP3430_EN_GPIO4_SHIFT				15
-#define OMAP3430_EN_GPIO3				(1 << 14)
+#define OMAP3430_EN_GPIO3_MASK				(1 << 14)
 #define OMAP3430_EN_GPIO3_SHIFT				14
-#define OMAP3430_EN_GPIO2				(1 << 13)
+#define OMAP3430_EN_GPIO2_MASK				(1 << 13)
 #define OMAP3430_EN_GPIO2_SHIFT				13
-#define OMAP3430_EN_UART3				(1 << 11)
+#define OMAP3430_EN_UART3_MASK				(1 << 11)
 #define OMAP3430_EN_UART3_SHIFT				11
-#define OMAP3430_EN_GPT9				(1 << 10)
+#define OMAP3430_EN_GPT9_MASK				(1 << 10)
 #define OMAP3430_EN_GPT9_SHIFT				10
-#define OMAP3430_EN_GPT8				(1 << 9)
+#define OMAP3430_EN_GPT8_MASK				(1 << 9)
 #define OMAP3430_EN_GPT8_SHIFT				9
-#define OMAP3430_EN_GPT7				(1 << 8)
+#define OMAP3430_EN_GPT7_MASK				(1 << 8)
 #define OMAP3430_EN_GPT7_SHIFT				8
-#define OMAP3430_EN_GPT6				(1 << 7)
+#define OMAP3430_EN_GPT6_MASK				(1 << 7)
 #define OMAP3430_EN_GPT6_SHIFT				7
-#define OMAP3430_EN_GPT5				(1 << 6)
+#define OMAP3430_EN_GPT5_MASK				(1 << 6)
 #define OMAP3430_EN_GPT5_SHIFT				6
-#define OMAP3430_EN_GPT4				(1 << 5)
+#define OMAP3430_EN_GPT4_MASK				(1 << 5)
 #define OMAP3430_EN_GPT4_SHIFT				5
-#define OMAP3430_EN_GPT3				(1 << 4)
+#define OMAP3430_EN_GPT3_MASK				(1 << 4)
 #define OMAP3430_EN_GPT3_SHIFT				4
-#define OMAP3430_EN_GPT2				(1 << 3)
+#define OMAP3430_EN_GPT2_MASK				(1 << 3)
 #define OMAP3430_EN_GPT2_SHIFT				3
 
 /* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER, PM_WKST_PER shared bits */
 /* XXX Possible TI documentation bug: should the PM_WKST_PER EN_* bits
  * be ST_* bits instead? */
-#define OMAP3430_EN_MCBSP4				(1 << 2)
+#define OMAP3430_EN_MCBSP4_MASK				(1 << 2)
 #define OMAP3430_EN_MCBSP4_SHIFT			2
-#define OMAP3430_EN_MCBSP3				(1 << 1)
+#define OMAP3430_EN_MCBSP3_MASK				(1 << 1)
 #define OMAP3430_EN_MCBSP3_SHIFT			1
-#define OMAP3430_EN_MCBSP2				(1 << 0)
+#define OMAP3430_EN_MCBSP2_MASK				(1 << 0)
 #define OMAP3430_EN_MCBSP2_SHIFT			0
 
 /* CM_IDLEST_PER, PM_WKST_PER shared bits */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/prm44xx.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/prm44xx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/prm44xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/prm44xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,8 +1,8 @@
 /*
  * OMAP44xx PRM instance offset macros
  *
- * Copyright (C) 2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Paul Walmsley (paul@pwsan.com)
  * Rajendra Nayak (rnayak@ti.com)
@@ -25,387 +25,726 @@
 
 /* PRM */
 
-
 /* PRM.OCP_SOCKET_PRM register offsets */
+#define OMAP4_REVISION_PRM_OFFSET			0x0000
 #define OMAP4430_REVISION_PRM				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4_PRM_IRQSTATUS_MPU_OFFSET			0x0010
 #define OMAP4430_PRM_IRQSTATUS_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0010)
+#define OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET		0x0014
 #define OMAP4430_PRM_IRQSTATUS_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0014)
+#define OMAP4_PRM_IRQENABLE_MPU_OFFSET			0x0018
 #define OMAP4430_PRM_IRQENABLE_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0018)
+#define OMAP4_PRM_IRQENABLE_MPU_2_OFFSET		0x001c
 #define OMAP4430_PRM_IRQENABLE_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x001c)
+#define OMAP4_PRM_IRQSTATUS_DUCATI_OFFSET		0x0020
 #define OMAP4430_PRM_IRQSTATUS_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0020)
+#define OMAP4_PRM_IRQENABLE_DUCATI_OFFSET		0x0028
 #define OMAP4430_PRM_IRQENABLE_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0028)
+#define OMAP4_PRM_IRQSTATUS_TESLA_OFFSET		0x0030
 #define OMAP4430_PRM_IRQSTATUS_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0030)
+#define OMAP4_PRM_IRQENABLE_TESLA_OFFSET		0x0038
 #define OMAP4430_PRM_IRQENABLE_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0038)
+#define OMAP4_PRM_PRM_PROFILING_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_PRM_PRM_PROFILING_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040)
 
 /* PRM.CKGEN_PRM register offsets */
+#define OMAP4_CM_ABE_DSS_SYS_CLKSEL_OFFSET		0x0000
 #define OMAP4430_CM_ABE_DSS_SYS_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0000)
+#define OMAP4_CM_DPLL_SYS_REF_CLKSEL_OFFSET		0x0004
 #define OMAP4430_CM_DPLL_SYS_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0004)
+#define OMAP4_CM_L4_WKUP_CLKSEL_OFFSET			0x0008
 #define OMAP4430_CM_L4_WKUP_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0008)
+#define OMAP4_CM_ABE_PLL_REF_CLKSEL_OFFSET		0x000c
 #define OMAP4430_CM_ABE_PLL_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x000c)
+#define OMAP4_CM_SYS_CLKSEL_OFFSET			0x0010
 #define OMAP4430_CM_SYS_CLKSEL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0010)
 
 /* PRM.MPU_PRM register offsets */
+#define OMAP4_PM_MPU_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_MPU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0000)
+#define OMAP4_PM_MPU_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_MPU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0004)
+#define OMAP4_RM_MPU_RSTST_OFFSET			0x0014
 #define OMAP4430_RM_MPU_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0014)
+#define OMAP4_RM_MPU_MPU_CONTEXT_OFFSET			0x0024
 #define OMAP4430_RM_MPU_MPU_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0024)
 
 /* PRM.TESLA_PRM register offsets */
+#define OMAP4_PM_TESLA_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_TESLA_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0000)
+#define OMAP4_PM_TESLA_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_TESLA_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0004)
+#define OMAP4_RM_TESLA_RSTCTRL_OFFSET			0x0010
 #define OMAP4430_RM_TESLA_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0010)
+#define OMAP4_RM_TESLA_RSTST_OFFSET			0x0014
 #define OMAP4430_RM_TESLA_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0014)
+#define OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_TESLA_TESLA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0024)
 
 /* PRM.ABE_PRM register offsets */
+#define OMAP4_PM_ABE_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_ABE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0000)
+#define OMAP4_PM_ABE_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_ABE_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0004)
+#define OMAP4_RM_ABE_AESS_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_ABE_AESS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x002c)
+#define OMAP4_PM_ABE_PDM_WKDEP_OFFSET			0x0030
 #define OMAP4430_PM_ABE_PDM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0030)
+#define OMAP4_RM_ABE_PDM_CONTEXT_OFFSET			0x0034
 #define OMAP4430_RM_ABE_PDM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0034)
+#define OMAP4_PM_ABE_DMIC_WKDEP_OFFSET			0x0038
 #define OMAP4430_PM_ABE_DMIC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0038)
+#define OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET		0x003c
 #define OMAP4430_RM_ABE_DMIC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x003c)
+#define OMAP4_PM_ABE_MCASP_WKDEP_OFFSET			0x0040
 #define OMAP4430_PM_ABE_MCASP_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0040)
+#define OMAP4_RM_ABE_MCASP_CONTEXT_OFFSET		0x0044
 #define OMAP4430_RM_ABE_MCASP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0044)
+#define OMAP4_PM_ABE_MCBSP1_WKDEP_OFFSET		0x0048
 #define OMAP4430_PM_ABE_MCBSP1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0048)
+#define OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET		0x004c
 #define OMAP4430_RM_ABE_MCBSP1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x004c)
+#define OMAP4_PM_ABE_MCBSP2_WKDEP_OFFSET		0x0050
 #define OMAP4430_PM_ABE_MCBSP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0050)
+#define OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET		0x0054
 #define OMAP4430_RM_ABE_MCBSP2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0054)
+#define OMAP4_PM_ABE_MCBSP3_WKDEP_OFFSET		0x0058
 #define OMAP4430_PM_ABE_MCBSP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0058)
+#define OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET		0x005c
 #define OMAP4430_RM_ABE_MCBSP3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x005c)
+#define OMAP4_PM_ABE_SLIMBUS_WKDEP_OFFSET		0x0060
 #define OMAP4430_PM_ABE_SLIMBUS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0060)
+#define OMAP4_RM_ABE_SLIMBUS_CONTEXT_OFFSET		0x0064
 #define OMAP4430_RM_ABE_SLIMBUS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0064)
+#define OMAP4_PM_ABE_TIMER5_WKDEP_OFFSET		0x0068
 #define OMAP4430_PM_ABE_TIMER5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0068)
+#define OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET		0x006c
 #define OMAP4430_RM_ABE_TIMER5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x006c)
+#define OMAP4_PM_ABE_TIMER6_WKDEP_OFFSET		0x0070
 #define OMAP4430_PM_ABE_TIMER6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0070)
+#define OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET		0x0074
 #define OMAP4430_RM_ABE_TIMER6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0074)
+#define OMAP4_PM_ABE_TIMER7_WKDEP_OFFSET		0x0078
 #define OMAP4430_PM_ABE_TIMER7_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0078)
+#define OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET		0x007c
 #define OMAP4430_RM_ABE_TIMER7_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x007c)
+#define OMAP4_PM_ABE_TIMER8_WKDEP_OFFSET		0x0080
 #define OMAP4430_PM_ABE_TIMER8_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0080)
+#define OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET		0x0084
 #define OMAP4430_RM_ABE_TIMER8_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0084)
+#define OMAP4_PM_ABE_WDT3_WKDEP_OFFSET			0x0088
 #define OMAP4430_PM_ABE_WDT3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0088)
+#define OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET		0x008c
 #define OMAP4430_RM_ABE_WDT3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x008c)
 
 /* PRM.ALWAYS_ON_PRM register offsets */
+#define OMAP4_RM_ALWON_MDMINTC_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_ALWON_MDMINTC_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0024)
+#define OMAP4_PM_ALWON_SR_MPU_WKDEP_OFFSET		0x0028
 #define OMAP4430_PM_ALWON_SR_MPU_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0028)
+#define OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_ALWON_SR_MPU_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x002c)
+#define OMAP4_PM_ALWON_SR_IVA_WKDEP_OFFSET		0x0030
 #define OMAP4430_PM_ALWON_SR_IVA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0030)
+#define OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET		0x0034
 #define OMAP4430_RM_ALWON_SR_IVA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0034)
+#define OMAP4_PM_ALWON_SR_CORE_WKDEP_OFFSET		0x0038
 #define OMAP4430_PM_ALWON_SR_CORE_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0038)
+#define OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET		0x003c
 #define OMAP4430_RM_ALWON_SR_CORE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x003c)
 
 /* PRM.CORE_PRM register offsets */
+#define OMAP4_PM_CORE_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_CORE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0000)
+#define OMAP4_PM_CORE_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_CORE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0004)
+#define OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_L3_1_L3_1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0024)
+#define OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET		0x0124
 #define OMAP4430_RM_L3_2_L3_2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0124)
+#define OMAP4_RM_L3_2_GPMC_CONTEXT_OFFSET		0x012c
 #define OMAP4430_RM_L3_2_GPMC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x012c)
+#define OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET		0x0134
 #define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0134)
+#define OMAP4_RM_DUCATI_RSTCTRL_OFFSET			0x0210
 #define OMAP4430_RM_DUCATI_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0210)
+#define OMAP4_RM_DUCATI_RSTST_OFFSET			0x0214
 #define OMAP4430_RM_DUCATI_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0214)
+#define OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET		0x0224
 #define OMAP4430_RM_DUCATI_DUCATI_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0224)
+#define OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET		0x0324
 #define OMAP4430_RM_SDMA_SDMA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0324)
+#define OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET		0x0424
 #define OMAP4430_RM_MEMIF_DMM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0424)
+#define OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET		0x042c
 #define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x042c)
+#define OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET		0x0434
 #define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0434)
+#define OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET		0x043c
 #define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x043c)
+#define OMAP4_RM_MEMIF_DLL_CONTEXT_OFFSET		0x0444
 #define OMAP4430_RM_MEMIF_DLL_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0444)
+#define OMAP4_RM_MEMIF_EMIF_H1_CONTEXT_OFFSET		0x0454
 #define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0454)
+#define OMAP4_RM_MEMIF_EMIF_H2_CONTEXT_OFFSET		0x045c
 #define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x045c)
+#define OMAP4_RM_MEMIF_DLL_H_CONTEXT_OFFSET		0x0464
 #define OMAP4430_RM_MEMIF_DLL_H_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0464)
+#define OMAP4_RM_D2D_SAD2D_CONTEXT_OFFSET		0x0524
 #define OMAP4430_RM_D2D_SAD2D_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0524)
+#define OMAP4_RM_D2D_MODEM_ICR_CONTEXT_OFFSET		0x052c
 #define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x052c)
+#define OMAP4_RM_D2D_SAD2D_FW_CONTEXT_OFFSET		0x0534
 #define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0534)
+#define OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET		0x0624
 #define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0624)
+#define OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET		0x062c
 #define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x062c)
+#define OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET		0x0634
 #define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0634)
+#define OMAP4_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET		0x063c
 #define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x063c)
+#define OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET		0x0724
 #define OMAP4430_RM_L3INSTR_L3_3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0724)
+#define OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET	0x072c
 #define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x072c)
+#define OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET		0x0744
 #define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0744)
 
 /* PRM.IVAHD_PRM register offsets */
+#define OMAP4_PM_IVAHD_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_IVAHD_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0000)
+#define OMAP4_PM_IVAHD_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_IVAHD_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0004)
+#define OMAP4_RM_IVAHD_RSTCTRL_OFFSET			0x0010
 #define OMAP4430_RM_IVAHD_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0010)
+#define OMAP4_RM_IVAHD_RSTST_OFFSET			0x0014
 #define OMAP4430_RM_IVAHD_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0014)
+#define OMAP4_RM_IVAHD_IVAHD_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_IVAHD_IVAHD_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0024)
+#define OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_IVAHD_SL2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x002c)
 
 /* PRM.CAM_PRM register offsets */
+#define OMAP4_PM_CAM_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_CAM_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0000)
+#define OMAP4_PM_CAM_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_CAM_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0004)
+#define OMAP4_RM_CAM_ISS_CONTEXT_OFFSET			0x0024
 #define OMAP4430_RM_CAM_ISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0024)
+#define OMAP4_RM_CAM_FDIF_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_CAM_FDIF_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x002c)
 
 /* PRM.DSS_PRM register offsets */
+#define OMAP4_PM_DSS_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_DSS_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0000)
+#define OMAP4_PM_DSS_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_DSS_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0004)
+#define OMAP4_PM_DSS_DSS_WKDEP_OFFSET			0x0020
 #define OMAP4430_PM_DSS_DSS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0020)
+#define OMAP4_RM_DSS_DSS_CONTEXT_OFFSET			0x0024
 #define OMAP4430_RM_DSS_DSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0024)
+#define OMAP4_RM_DSS_DEISS_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_DSS_DEISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x002c)
 
 /* PRM.GFX_PRM register offsets */
+#define OMAP4_PM_GFX_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_GFX_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0000)
+#define OMAP4_PM_GFX_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_GFX_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0004)
+#define OMAP4_RM_GFX_GFX_CONTEXT_OFFSET			0x0024
 #define OMAP4430_RM_GFX_GFX_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0024)
 
 /* PRM.L3INIT_PRM register offsets */
+#define OMAP4_PM_L3INIT_PWRSTCTRL_OFFSET		0x0000
 #define OMAP4430_PM_L3INIT_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0000)
+#define OMAP4_PM_L3INIT_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_L3INIT_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0004)
+#define OMAP4_PM_L3INIT_MMC1_WKDEP_OFFSET		0x0028
 #define OMAP4430_PM_L3INIT_MMC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0028)
+#define OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_L3INIT_MMC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x002c)
+#define OMAP4_PM_L3INIT_MMC2_WKDEP_OFFSET		0x0030
 #define OMAP4430_PM_L3INIT_MMC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0030)
+#define OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET		0x0034
 #define OMAP4430_RM_L3INIT_MMC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0034)
+#define OMAP4_PM_L3INIT_HSI_WKDEP_OFFSET		0x0038
 #define OMAP4430_PM_L3INIT_HSI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0038)
+#define OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET		0x003c
 #define OMAP4430_RM_L3INIT_HSI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x003c)
+#define OMAP4_PM_L3INIT_UNIPRO1_WKDEP_OFFSET		0x0040
 #define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0040)
+#define OMAP4_RM_L3INIT_UNIPRO1_CONTEXT_OFFSET		0x0044
 #define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0044)
+#define OMAP4_PM_L3INIT_USB_HOST_WKDEP_OFFSET		0x0058
 #define OMAP4430_PM_L3INIT_USB_HOST_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0058)
+#define OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET		0x005c
 #define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x005c)
+#define OMAP4_PM_L3INIT_USB_OTG_WKDEP_OFFSET		0x0060
 #define OMAP4430_PM_L3INIT_USB_OTG_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0060)
+#define OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET		0x0064
 #define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0064)
+#define OMAP4_PM_L3INIT_USB_TLL_WKDEP_OFFSET		0x0068
 #define OMAP4430_PM_L3INIT_USB_TLL_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0068)
+#define OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET		0x006c
 #define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x006c)
+#define OMAP4_RM_L3INIT_P1500_CONTEXT_OFFSET		0x007c
 #define OMAP4430_RM_L3INIT_P1500_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x007c)
+#define OMAP4_RM_L3INIT_EMAC_CONTEXT_OFFSET		0x0084
 #define OMAP4430_RM_L3INIT_EMAC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0084)
+#define OMAP4_PM_L3INIT_SATA_WKDEP_OFFSET		0x0088
 #define OMAP4430_PM_L3INIT_SATA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0088)
+#define OMAP4_RM_L3INIT_SATA_CONTEXT_OFFSET		0x008c
 #define OMAP4430_RM_L3INIT_SATA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x008c)
+#define OMAP4_RM_L3INIT_TPPSS_CONTEXT_OFFSET		0x0094
 #define OMAP4430_RM_L3INIT_TPPSS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0094)
+#define OMAP4_PM_L3INIT_PCIESS_WKDEP_OFFSET		0x0098
 #define OMAP4430_PM_L3INIT_PCIESS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0098)
+#define OMAP4_RM_L3INIT_PCIESS_CONTEXT_OFFSET		0x009c
 #define OMAP4430_RM_L3INIT_PCIESS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x009c)
+#define OMAP4_RM_L3INIT_CCPTX_CONTEXT_OFFSET		0x00ac
 #define OMAP4430_RM_L3INIT_CCPTX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00ac)
+#define OMAP4_PM_L3INIT_XHPI_WKDEP_OFFSET		0x00c0
 #define OMAP4430_PM_L3INIT_XHPI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c0)
+#define OMAP4_RM_L3INIT_XHPI_CONTEXT_OFFSET		0x00c4
 #define OMAP4430_RM_L3INIT_XHPI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c4)
+#define OMAP4_PM_L3INIT_MMC6_WKDEP_OFFSET		0x00c8
 #define OMAP4430_PM_L3INIT_MMC6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c8)
+#define OMAP4_RM_L3INIT_MMC6_CONTEXT_OFFSET		0x00cc
 #define OMAP4430_RM_L3INIT_MMC6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00cc)
+#define OMAP4_PM_L3INIT_USB_HOST_FS_WKDEP_OFFSET	0x00d0
 #define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d0)
+#define OMAP4_RM_L3INIT_USB_HOST_FS_CONTEXT_OFFSET	0x00d4
 #define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d4)
+#define OMAP4_RM_L3INIT_USBPHYOCP2SCP_CONTEXT_OFFSET	0x00e4
 #define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT	OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00e4)
 
 /* PRM.L4PER_PRM register offsets */
+#define OMAP4_PM_L4PER_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_L4PER_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0000)
+#define OMAP4_PM_L4PER_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_L4PER_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0004)
+#define OMAP4_RM_L4PER_ADC_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_L4PER_ADC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0024)
+#define OMAP4_PM_L4PER_DMTIMER10_WKDEP_OFFSET		0x0028
 #define OMAP4430_PM_L4PER_DMTIMER10_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0028)
+#define OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x002c)
+#define OMAP4_PM_L4PER_DMTIMER11_WKDEP_OFFSET		0x0030
 #define OMAP4430_PM_L4PER_DMTIMER11_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0030)
+#define OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET		0x0034
 #define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0034)
+#define OMAP4_PM_L4PER_DMTIMER2_WKDEP_OFFSET		0x0038
 #define OMAP4430_PM_L4PER_DMTIMER2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0038)
+#define OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET		0x003c
 #define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x003c)
+#define OMAP4_PM_L4PER_DMTIMER3_WKDEP_OFFSET		0x0040
 #define OMAP4430_PM_L4PER_DMTIMER3_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0040)
+#define OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET		0x0044
 #define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0044)
+#define OMAP4_PM_L4PER_DMTIMER4_WKDEP_OFFSET		0x0048
 #define OMAP4430_PM_L4PER_DMTIMER4_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0048)
+#define OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET		0x004c
 #define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x004c)
+#define OMAP4_PM_L4PER_DMTIMER9_WKDEP_OFFSET		0x0050
 #define OMAP4430_PM_L4PER_DMTIMER9_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0050)
+#define OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET		0x0054
 #define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0054)
+#define OMAP4_RM_L4PER_ELM_CONTEXT_OFFSET		0x005c
 #define OMAP4430_RM_L4PER_ELM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x005c)
+#define OMAP4_PM_L4PER_GPIO2_WKDEP_OFFSET		0x0060
 #define OMAP4430_PM_L4PER_GPIO2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0060)
+#define OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET		0x0064
 #define OMAP4430_RM_L4PER_GPIO2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0064)
+#define OMAP4_PM_L4PER_GPIO3_WKDEP_OFFSET		0x0068
 #define OMAP4430_PM_L4PER_GPIO3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0068)
+#define OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET		0x006c
 #define OMAP4430_RM_L4PER_GPIO3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x006c)
+#define OMAP4_PM_L4PER_GPIO4_WKDEP_OFFSET		0x0070
 #define OMAP4430_PM_L4PER_GPIO4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0070)
+#define OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET		0x0074
 #define OMAP4430_RM_L4PER_GPIO4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0074)
+#define OMAP4_PM_L4PER_GPIO5_WKDEP_OFFSET		0x0078
 #define OMAP4430_PM_L4PER_GPIO5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0078)
+#define OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET		0x007c
 #define OMAP4430_RM_L4PER_GPIO5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x007c)
+#define OMAP4_PM_L4PER_GPIO6_WKDEP_OFFSET		0x0080
 #define OMAP4430_PM_L4PER_GPIO6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0080)
+#define OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET		0x0084
 #define OMAP4430_RM_L4PER_GPIO6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0084)
+#define OMAP4_RM_L4PER_HDQ1W_CONTEXT_OFFSET		0x008c
 #define OMAP4430_RM_L4PER_HDQ1W_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x008c)
+#define OMAP4_PM_L4PER_HECC1_WKDEP_OFFSET		0x0090
 #define OMAP4430_PM_L4PER_HECC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0090)
+#define OMAP4_RM_L4PER_HECC1_CONTEXT_OFFSET		0x0094
 #define OMAP4430_RM_L4PER_HECC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0094)
+#define OMAP4_PM_L4PER_HECC2_WKDEP_OFFSET		0x0098
 #define OMAP4430_PM_L4PER_HECC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0098)
+#define OMAP4_RM_L4PER_HECC2_CONTEXT_OFFSET		0x009c
 #define OMAP4430_RM_L4PER_HECC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x009c)
+#define OMAP4_PM_L4PER_I2C1_WKDEP_OFFSET		0x00a0
 #define OMAP4430_PM_L4PER_I2C1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a0)
+#define OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET		0x00a4
 #define OMAP4430_RM_L4PER_I2C1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a4)
+#define OMAP4_PM_L4PER_I2C2_WKDEP_OFFSET		0x00a8
 #define OMAP4430_PM_L4PER_I2C2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a8)
+#define OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET		0x00ac
 #define OMAP4430_RM_L4PER_I2C2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ac)
+#define OMAP4_PM_L4PER_I2C3_WKDEP_OFFSET		0x00b0
 #define OMAP4430_PM_L4PER_I2C3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b0)
+#define OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET		0x00b4
 #define OMAP4430_RM_L4PER_I2C3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b4)
+#define OMAP4_PM_L4PER_I2C4_WKDEP_OFFSET		0x00b8
 #define OMAP4430_PM_L4PER_I2C4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b8)
+#define OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET		0x00bc
 #define OMAP4430_RM_L4PER_I2C4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00bc)
+#define OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET		0x00c0
 #define OMAP4430_RM_L4PER_L4_PER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00c0)
+#define OMAP4_PM_L4PER_MCASP2_WKDEP_OFFSET		0x00d0
 #define OMAP4430_PM_L4PER_MCASP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d0)
+#define OMAP4_RM_L4PER_MCASP2_CONTEXT_OFFSET		0x00d4
 #define OMAP4430_RM_L4PER_MCASP2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d4)
+#define OMAP4_PM_L4PER_MCASP3_WKDEP_OFFSET		0x00d8
 #define OMAP4430_PM_L4PER_MCASP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d8)
+#define OMAP4_RM_L4PER_MCASP3_CONTEXT_OFFSET		0x00dc
 #define OMAP4430_RM_L4PER_MCASP3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00dc)
+#define OMAP4_PM_L4PER_MCBSP4_WKDEP_OFFSET		0x00e0
 #define OMAP4430_PM_L4PER_MCBSP4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e0)
+#define OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET		0x00e4
 #define OMAP4430_RM_L4PER_MCBSP4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e4)
+#define OMAP4_RM_L4PER_MGATE_CONTEXT_OFFSET		0x00ec
 #define OMAP4430_RM_L4PER_MGATE_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ec)
+#define OMAP4_PM_L4PER_MCSPI1_WKDEP_OFFSET		0x00f0
 #define OMAP4430_PM_L4PER_MCSPI1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f0)
+#define OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET		0x00f4
 #define OMAP4430_RM_L4PER_MCSPI1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f4)
+#define OMAP4_PM_L4PER_MCSPI2_WKDEP_OFFSET		0x00f8
 #define OMAP4430_PM_L4PER_MCSPI2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f8)
+#define OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET		0x00fc
 #define OMAP4430_RM_L4PER_MCSPI2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00fc)
+#define OMAP4_PM_L4PER_MCSPI3_WKDEP_OFFSET		0x0100
 #define OMAP4430_PM_L4PER_MCSPI3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0100)
+#define OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET		0x0104
 #define OMAP4430_RM_L4PER_MCSPI3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0104)
+#define OMAP4_PM_L4PER_MCSPI4_WKDEP_OFFSET		0x0108
 #define OMAP4430_PM_L4PER_MCSPI4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0108)
+#define OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET		0x010c
 #define OMAP4430_RM_L4PER_MCSPI4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x010c)
+#define OMAP4_PM_L4PER_MMCSD3_WKDEP_OFFSET		0x0120
 #define OMAP4430_PM_L4PER_MMCSD3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0120)
+#define OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET		0x0124
 #define OMAP4430_RM_L4PER_MMCSD3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0124)
+#define OMAP4_PM_L4PER_MMCSD4_WKDEP_OFFSET		0x0128
 #define OMAP4430_PM_L4PER_MMCSD4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0128)
+#define OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET		0x012c
 #define OMAP4430_RM_L4PER_MMCSD4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x012c)
+#define OMAP4_RM_L4PER_MSPROHG_CONTEXT_OFFSET		0x0134
 #define OMAP4430_RM_L4PER_MSPROHG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0134)
+#define OMAP4_PM_L4PER_SLIMBUS2_WKDEP_OFFSET		0x0138
 #define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0138)
+#define OMAP4_RM_L4PER_SLIMBUS2_CONTEXT_OFFSET		0x013c
 #define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x013c)
+#define OMAP4_PM_L4PER_UART1_WKDEP_OFFSET		0x0140
 #define OMAP4430_PM_L4PER_UART1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0140)
+#define OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET		0x0144
 #define OMAP4430_RM_L4PER_UART1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0144)
+#define OMAP4_PM_L4PER_UART2_WKDEP_OFFSET		0x0148
 #define OMAP4430_PM_L4PER_UART2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0148)
+#define OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET		0x014c
 #define OMAP4430_RM_L4PER_UART2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x014c)
+#define OMAP4_PM_L4PER_UART3_WKDEP_OFFSET		0x0150
 #define OMAP4430_PM_L4PER_UART3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0150)
+#define OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET		0x0154
 #define OMAP4430_RM_L4PER_UART3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0154)
+#define OMAP4_PM_L4PER_UART4_WKDEP_OFFSET		0x0158
 #define OMAP4430_PM_L4PER_UART4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0158)
+#define OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET		0x015c
 #define OMAP4430_RM_L4PER_UART4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x015c)
+#define OMAP4_PM_L4PER_MMCSD5_WKDEP_OFFSET		0x0160
 #define OMAP4430_PM_L4PER_MMCSD5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0160)
+#define OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET		0x0164
 #define OMAP4430_RM_L4PER_MMCSD5_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0164)
+#define OMAP4_PM_L4PER_I2C5_WKDEP_OFFSET		0x0168
 #define OMAP4430_PM_L4PER_I2C5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0168)
+#define OMAP4_RM_L4PER_I2C5_CONTEXT_OFFSET		0x016c
 #define OMAP4430_RM_L4PER_I2C5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x016c)
+#define OMAP4_RM_L4SEC_AES1_CONTEXT_OFFSET		0x01a4
 #define OMAP4430_RM_L4SEC_AES1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01a4)
+#define OMAP4_RM_L4SEC_AES2_CONTEXT_OFFSET		0x01ac
 #define OMAP4430_RM_L4SEC_AES2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01ac)
+#define OMAP4_RM_L4SEC_DES3DES_CONTEXT_OFFSET		0x01b4
 #define OMAP4430_RM_L4SEC_DES3DES_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01b4)
+#define OMAP4_RM_L4SEC_PKAEIP29_CONTEXT_OFFSET		0x01bc
 #define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01bc)
+#define OMAP4_RM_L4SEC_RNG_CONTEXT_OFFSET		0x01c4
 #define OMAP4430_RM_L4SEC_RNG_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01c4)
+#define OMAP4_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET		0x01cc
 #define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01cc)
+#define OMAP4_RM_L4SEC_CRYPTODMA_CONTEXT_OFFSET		0x01dc
 #define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01dc)
 
 /* PRM.CEFUSE_PRM register offsets */
+#define OMAP4_PM_CEFUSE_PWRSTCTRL_OFFSET		0x0000
 #define OMAP4430_PM_CEFUSE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0000)
+#define OMAP4_PM_CEFUSE_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_CEFUSE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0004)
+#define OMAP4_RM_CEFUSE_CEFUSE_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0024)
 
 /* PRM.WKUP_PRM register offsets */
+#define OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_WKUP_L4WKUP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0024)
+#define OMAP4_RM_WKUP_WDT1_CONTEXT_OFFSET		0x002c
 #define OMAP4430_RM_WKUP_WDT1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x002c)
+#define OMAP4_PM_WKUP_WDT2_WKDEP_OFFSET			0x0030
 #define OMAP4430_PM_WKUP_WDT2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0030)
+#define OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET		0x0034
 #define OMAP4430_RM_WKUP_WDT2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0034)
+#define OMAP4_PM_WKUP_GPIO1_WKDEP_OFFSET		0x0038
 #define OMAP4430_PM_WKUP_GPIO1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0038)
+#define OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET		0x003c
 #define OMAP4430_RM_WKUP_GPIO1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x003c)
+#define OMAP4_PM_WKUP_TIMER1_WKDEP_OFFSET		0x0040
 #define OMAP4430_PM_WKUP_TIMER1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0040)
+#define OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET		0x0044
 #define OMAP4430_RM_WKUP_TIMER1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0044)
+#define OMAP4_PM_WKUP_TIMER12_WKDEP_OFFSET		0x0048
 #define OMAP4430_PM_WKUP_TIMER12_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0048)
+#define OMAP4_RM_WKUP_TIMER12_CONTEXT_OFFSET		0x004c
 #define OMAP4430_RM_WKUP_TIMER12_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x004c)
+#define OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET		0x0054
 #define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0054)
+#define OMAP4_PM_WKUP_USIM_WKDEP_OFFSET			0x0058
 #define OMAP4430_PM_WKUP_USIM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0058)
+#define OMAP4_RM_WKUP_USIM_CONTEXT_OFFSET		0x005c
 #define OMAP4430_RM_WKUP_USIM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x005c)
+#define OMAP4_RM_WKUP_SARRAM_CONTEXT_OFFSET		0x0064
 #define OMAP4430_RM_WKUP_SARRAM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0064)
+#define OMAP4_PM_WKUP_KEYBOARD_WKDEP_OFFSET		0x0078
 #define OMAP4430_PM_WKUP_KEYBOARD_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0078)
+#define OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET		0x007c
 #define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x007c)
+#define OMAP4_PM_WKUP_RTC_WKDEP_OFFSET			0x0080
 #define OMAP4430_PM_WKUP_RTC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0080)
+#define OMAP4_RM_WKUP_RTC_CONTEXT_OFFSET		0x0084
 #define OMAP4430_RM_WKUP_RTC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0084)
 
 /* PRM.WKUP_CM register offsets */
+#define OMAP4_CM_WKUP_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_WKUP_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0000)
+#define OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0020)
+#define OMAP4_CM_WKUP_WDT1_CLKCTRL_OFFSET		0x0028
 #define OMAP4430_CM_WKUP_WDT1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0028)
+#define OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET		0x0030
 #define OMAP4430_CM_WKUP_WDT2_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0030)
+#define OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET		0x0038
 #define OMAP4430_CM_WKUP_GPIO1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0038)
+#define OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET		0x0040
 #define OMAP4430_CM_WKUP_TIMER1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0040)
+#define OMAP4_CM_WKUP_TIMER12_CLKCTRL_OFFSET		0x0048
 #define OMAP4430_CM_WKUP_TIMER12_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0048)
+#define OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET		0x0050
 #define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0050)
+#define OMAP4_CM_WKUP_USIM_CLKCTRL_OFFSET		0x0058
 #define OMAP4430_CM_WKUP_USIM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0058)
+#define OMAP4_CM_WKUP_SARRAM_CLKCTRL_OFFSET		0x0060
 #define OMAP4430_CM_WKUP_SARRAM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0060)
+#define OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET		0x0078
 #define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0078)
+#define OMAP4_CM_WKUP_RTC_CLKCTRL_OFFSET		0x0080
 #define OMAP4430_CM_WKUP_RTC_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0080)
+#define OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET		0x0088
 #define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0088)
 
 /* PRM.EMU_PRM register offsets */
+#define OMAP4_PM_EMU_PWRSTCTRL_OFFSET			0x0000
 #define OMAP4430_PM_EMU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0000)
+#define OMAP4_PM_EMU_PWRSTST_OFFSET			0x0004
 #define OMAP4430_PM_EMU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0004)
+#define OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET		0x0024
 #define OMAP4430_RM_EMU_DEBUGSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0024)
 
 /* PRM.EMU_CM register offsets */
+#define OMAP4_CM_EMU_CLKSTCTRL_OFFSET			0x0000
 #define OMAP4430_CM_EMU_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0000)
+#define OMAP4_CM_EMU_DYNAMICDEP_OFFSET			0x0008
 #define OMAP4430_CM_EMU_DYNAMICDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0008)
+#define OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET		0x0020
 #define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0020)
 
 /* PRM.DEVICE_PRM register offsets */
+#define OMAP4_PRM_RSTCTRL_OFFSET			0x0000
 #define OMAP4430_PRM_RSTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0000)
+#define OMAP4_PRM_RSTST_OFFSET				0x0004
 #define OMAP4430_PRM_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0004)
+#define OMAP4_PRM_RSTTIME_OFFSET			0x0008
 #define OMAP4430_PRM_RSTTIME				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0008)
+#define OMAP4_PRM_CLKREQCTRL_OFFSET			0x000c
 #define OMAP4430_PRM_CLKREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x000c)
+#define OMAP4_PRM_VOLTCTRL_OFFSET			0x0010
 #define OMAP4430_PRM_VOLTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0010)
+#define OMAP4_PRM_PWRREQCTRL_OFFSET			0x0014
 #define OMAP4430_PRM_PWRREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0014)
+#define OMAP4_PRM_PSCON_COUNT_OFFSET			0x0018
 #define OMAP4430_PRM_PSCON_COUNT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0018)
+#define OMAP4_PRM_IO_COUNT_OFFSET			0x001c
 #define OMAP4430_PRM_IO_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x001c)
+#define OMAP4_PRM_IO_PMCTRL_OFFSET			0x0020
 #define OMAP4430_PRM_IO_PMCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0020)
+#define OMAP4_PRM_VOLTSETUP_WARMRESET_OFFSET		0x0024
 #define OMAP4430_PRM_VOLTSETUP_WARMRESET		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0024)
+#define OMAP4_PRM_VOLTSETUP_CORE_OFF_OFFSET		0x0028
 #define OMAP4430_PRM_VOLTSETUP_CORE_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0028)
+#define OMAP4_PRM_VOLTSETUP_MPU_OFF_OFFSET		0x002c
 #define OMAP4430_PRM_VOLTSETUP_MPU_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x002c)
+#define OMAP4_PRM_VOLTSETUP_IVA_OFF_OFFSET		0x0030
 #define OMAP4430_PRM_VOLTSETUP_IVA_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0030)
+#define OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET	0x0034
 #define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0034)
+#define OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET	0x0038
 #define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0038)
+#define OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET	0x003c
 #define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x003c)
+#define OMAP4_PRM_VP_CORE_CONFIG_OFFSET			0x0040
 #define OMAP4430_PRM_VP_CORE_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0040)
+#define OMAP4_PRM_VP_CORE_STATUS_OFFSET			0x0044
 #define OMAP4430_PRM_VP_CORE_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0044)
+#define OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET		0x0048
 #define OMAP4430_PRM_VP_CORE_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0048)
+#define OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET		0x004c
 #define OMAP4430_PRM_VP_CORE_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x004c)
+#define OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET		0x0050
 #define OMAP4430_PRM_VP_CORE_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0050)
+#define OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET		0x0054
 #define OMAP4430_PRM_VP_CORE_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0054)
+#define OMAP4_PRM_VP_MPU_CONFIG_OFFSET			0x0058
 #define OMAP4430_PRM_VP_MPU_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0058)
+#define OMAP4_PRM_VP_MPU_STATUS_OFFSET			0x005c
 #define OMAP4430_PRM_VP_MPU_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x005c)
+#define OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET		0x0060
 #define OMAP4430_PRM_VP_MPU_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0060)
+#define OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET			0x0064
 #define OMAP4430_PRM_VP_MPU_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0064)
+#define OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET		0x0068
 #define OMAP4430_PRM_VP_MPU_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0068)
+#define OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET		0x006c
 #define OMAP4430_PRM_VP_MPU_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x006c)
+#define OMAP4_PRM_VP_IVA_CONFIG_OFFSET			0x0070
 #define OMAP4430_PRM_VP_IVA_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0070)
+#define OMAP4_PRM_VP_IVA_STATUS_OFFSET			0x0074
 #define OMAP4430_PRM_VP_IVA_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0074)
+#define OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET		0x0078
 #define OMAP4430_PRM_VP_IVA_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0078)
+#define OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET			0x007c
 #define OMAP4430_PRM_VP_IVA_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x007c)
+#define OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET		0x0080
 #define OMAP4430_PRM_VP_IVA_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0080)
+#define OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET		0x0084
 #define OMAP4430_PRM_VP_IVA_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0084)
+#define OMAP4_PRM_VC_SMPS_SA_OFFSET			0x0088
 #define OMAP4430_PRM_VC_SMPS_SA				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0088)
+#define OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET		0x008c
 #define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x008c)
+#define OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET		0x0090
 #define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0090)
+#define OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET		0x0094
 #define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0094)
+#define OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET		0x0098
 #define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0098)
+#define OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET		0x009c
 #define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x009c)
+#define OMAP4_PRM_VC_VAL_BYPASS_OFFSET			0x00a0
 #define OMAP4430_PRM_VC_VAL_BYPASS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a0)
+#define OMAP4_PRM_VC_CFG_CHANNEL_OFFSET			0x00a4
 #define OMAP4430_PRM_VC_CFG_CHANNEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a4)
+#define OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET		0x00a8
 #define OMAP4430_PRM_VC_CFG_I2C_MODE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a8)
+#define OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET			0x00ac
 #define OMAP4430_PRM_VC_CFG_I2C_CLK			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ac)
+#define OMAP4_PRM_SRAM_COUNT_OFFSET			0x00b0
 #define OMAP4430_PRM_SRAM_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b0)
+#define OMAP4_PRM_SRAM_WKUP_SETUP_OFFSET		0x00b4
 #define OMAP4430_PRM_SRAM_WKUP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b4)
+#define OMAP4_PRM_LDO_SRAM_CORE_SETUP_OFFSET		0x00b8
 #define OMAP4430_PRM_LDO_SRAM_CORE_SETUP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b8)
+#define OMAP4_PRM_LDO_SRAM_CORE_CTRL_OFFSET		0x00bc
 #define OMAP4430_PRM_LDO_SRAM_CORE_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00bc)
+#define OMAP4_PRM_LDO_SRAM_MPU_SETUP_OFFSET		0x00c0
 #define OMAP4430_PRM_LDO_SRAM_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c0)
+#define OMAP4_PRM_LDO_SRAM_MPU_CTRL_OFFSET		0x00c4
 #define OMAP4430_PRM_LDO_SRAM_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c4)
+#define OMAP4_PRM_LDO_SRAM_IVA_SETUP_OFFSET		0x00c8
 #define OMAP4430_PRM_LDO_SRAM_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c8)
+#define OMAP4_PRM_LDO_SRAM_IVA_CTRL_OFFSET		0x00cc
 #define OMAP4430_PRM_LDO_SRAM_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00cc)
+#define OMAP4_PRM_LDO_ABB_MPU_SETUP_OFFSET		0x00d0
 #define OMAP4430_PRM_LDO_ABB_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d0)
+#define OMAP4_PRM_LDO_ABB_MPU_CTRL_OFFSET		0x00d4
 #define OMAP4430_PRM_LDO_ABB_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d4)
+#define OMAP4_PRM_LDO_ABB_IVA_SETUP_OFFSET		0x00d8
 #define OMAP4430_PRM_LDO_ABB_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d8)
+#define OMAP4_PRM_LDO_ABB_IVA_CTRL_OFFSET		0x00dc
 #define OMAP4430_PRM_LDO_ABB_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00dc)
+#define OMAP4_PRM_LDO_BANDGAP_CTRL_OFFSET		0x00e0
 #define OMAP4430_PRM_LDO_BANDGAP_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0)
+#define OMAP4_PRM_DEVICE_OFF_CTRL_OFFSET		0x00e4
 #define OMAP4430_PRM_DEVICE_OFF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e4)
+#define OMAP4_PRM_PHASE1_CNDP_OFFSET			0x00e8
 #define OMAP4430_PRM_PHASE1_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e8)
+#define OMAP4_PRM_PHASE2A_CNDP_OFFSET			0x00ec
 #define OMAP4430_PRM_PHASE2A_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ec)
+#define OMAP4_PRM_PHASE2B_CNDP_OFFSET			0x00f0
 #define OMAP4430_PRM_PHASE2B_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f0)
+#define OMAP4_PRM_MODEM_IF_CTRL_OFFSET			0x00f4
 #define OMAP4430_PRM_MODEM_IF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f4)
 
-/* CHIRON_PRCM */
-
+/*
+ * PRCM_MPU
+ *
+ * The PRCM_MPU is a local PRCM inside the MPU subsystem. For the PRCM (global)
+ * point of view the PRCM_MPU is a single entity. It shares the same
+ * programming model as the global PRCM and thus can be assimilate as two new
+ * MOD inside the PRCM
+ */
 
-/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
-#define OMAP4430_REVISION_PRCM				OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
+/* PRCM_MPU.OCP_SOCKET_PRCM register offsets */
+#define OMAP4_REVISION_PRCM_OFFSET			0x0000
+#define OMAP4430_REVISION_PRCM				OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_MOD, 0x0000)
 
-/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
-#define OMAP4430_CHIRON_PRCM_PRM_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
+/* PRCM_MPU.DEVICE_PRM register offsets */
+#define OMAP4_PRCM_MPU_PRM_RSTST_OFFSET			0x0000
+#define OMAP4430_PRCM_MPU_PRM_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_MOD, 0x0000)
 
-/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
-#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU0_PWRSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
+/* PRCM_MPU.CPU0 register offsets */
+#define OMAP4_PM_CPU0_PWRSTCTRL_OFFSET			0x0000
+#define OMAP4430_PM_CPU0_PWRSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0000)
+#define OMAP4_PM_CPU0_PWRSTST_OFFSET			0x0004
+#define OMAP4430_PM_CPU0_PWRSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0004)
+#define OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET		0x0008
+#define OMAP4430_RM_CPU0_CPU0_CONTEXT			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0008)
+#define OMAP4_RM_CPU0_CPU0_RSTCTRL_OFFSET		0x000c
+#define OMAP4430_RM_CPU0_CPU0_RSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x000c)
+#define OMAP4_RM_CPU0_CPU0_RSTST_OFFSET			0x0010
+#define OMAP4430_RM_CPU0_CPU0_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0010)
+#define OMAP4_CM_CPU0_CPU0_CLKCTRL_OFFSET		0x0014
+#define OMAP4430_CM_CPU0_CPU0_CLKCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0014)
+#define OMAP4_CM_CPU0_CLKSTCTRL_OFFSET			0x0018
+#define OMAP4430_CM_CPU0_CLKSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0018)
 
-/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
-#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU1_PWRSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
+/* PRCM_MPU.CPU1 register offsets */
+#define OMAP4_PM_CPU1_PWRSTCTRL_OFFSET			0x0000
+#define OMAP4430_PM_CPU1_PWRSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0000)
+#define OMAP4_PM_CPU1_PWRSTST_OFFSET			0x0004
+#define OMAP4430_PM_CPU1_PWRSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0004)
+#define OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET		0x0008
+#define OMAP4430_RM_CPU1_CPU1_CONTEXT			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0008)
+#define OMAP4_RM_CPU1_CPU1_RSTCTRL_OFFSET		0x000c
+#define OMAP4430_RM_CPU1_CPU1_RSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x000c)
+#define OMAP4_RM_CPU1_CPU1_RSTST_OFFSET			0x0010
+#define OMAP4430_RM_CPU1_CPU1_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0010)
+#define OMAP4_CM_CPU1_CPU1_CLKCTRL_OFFSET		0x0014
+#define OMAP4430_CM_CPU1_CPU1_CLKCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0014)
+#define OMAP4_CM_CPU1_CLKSTCTRL_OFFSET			0x0018
+#define OMAP4430_CM_CPU1_CLKSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0018)
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/prm.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/prm.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/prm.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/prm.h	2010-08-01 18:11:14.000000000 -0400
@@ -24,8 +24,8 @@
 		OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
 #define OMAP44XX_PRM_REGADDR(module, reg)				\
 		OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
-#define OMAP44XX_CHIRONSS_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg))
+#define OMAP44XX_PRCM_MPU_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE + (module) + (reg))
 
 #include "prm44xx.h"
 
@@ -284,7 +284,7 @@
 #define OMAP_OFFLOADMODE_MASK				(0x3 << 3)
 #define OMAP_ONLOADMODE_SHIFT				1
 #define OMAP_ONLOADMODE_MASK				(0x3 << 1)
-#define OMAP_ENABLE					(1 << 0)
+#define OMAP_ENABLE_MASK				(1 << 0)
 
 /* PRM_RSTTIME */
 /* Named RM_RSTTIME_WKUP on the 24xx */
@@ -296,8 +296,8 @@
 /* PRM_RSTCTRL */
 /* Named RM_RSTCTRL_WKUP on the 24xx */
 /* 2420 calls RST_DPLL3 'RST_DPLL' */
-#define OMAP_RST_DPLL3					(1 << 2)
-#define OMAP_RST_GS					(1 << 1)
+#define OMAP_RST_DPLL3_MASK				(1 << 2)
+#define OMAP_RST_GS_MASK				(1 << 1)
 
 
 /*
@@ -316,7 +316,7 @@
  *	 PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU,
  *	 PM_PWSTST_NEON
  */
-#define OMAP_INTRANSITION				(1 << 20)
+#define OMAP_INTRANSITION_MASK				(1 << 20)
 
 
 /*
@@ -338,7 +338,7 @@
  * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
  *	 RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
  */
-#define OMAP_COREDOMAINWKUP_RST				(1 << 3)
+#define OMAP_COREDOMAINWKUP_RST_MASK			(1 << 3)
 
 /*
  * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
@@ -347,7 +347,7 @@
  *
  * 3430: RM_RSTST_CORE, RM_RSTST_EMU
  */
-#define OMAP_DOMAINWKUP_RST				(1 << 2)
+#define OMAP_DOMAINWKUP_RST_MASK			(1 << 2)
 
 /*
  * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
@@ -357,8 +357,8 @@
  *
  * 3430: RM_RSTST_CORE, RM_RSTST_EMU
  */
-#define OMAP_GLOBALWARM_RST				(1 << 1)
-#define OMAP_GLOBALCOLD_RST				(1 << 0)
+#define OMAP_GLOBALWARM_RST_MASK			(1 << 1)
+#define OMAP_GLOBALCOLD_RST_MASK			(1 << 0)
 
 /*
  * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
@@ -382,7 +382,7 @@
  *	 PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
  *	 PM_PWSTCTRL_NEON
  */
-#define OMAP_LOGICRETSTATE				(1 << 2)
+#define OMAP_LOGICRETSTATE_MASK				(1 << 2)
 
 /*
  * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/prm-regbits-24xx.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/prm-regbits-24xx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/prm-regbits-24xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/prm-regbits-24xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -19,14 +19,14 @@
 /* Bits shared between registers */
 
 /* PRCM_IRQSTATUS_MPU, PM_IRQSTATUS_DSP, PRCM_IRQSTATUS_IVA shared bits */
-#define OMAP24XX_VOLTTRANS_ST				(1 << 2)
-#define OMAP24XX_WKUP2_ST				(1 << 1)
-#define OMAP24XX_WKUP1_ST				(1 << 0)
+#define OMAP24XX_VOLTTRANS_ST_MASK			(1 << 2)
+#define OMAP24XX_WKUP2_ST_MASK				(1 << 1)
+#define OMAP24XX_WKUP1_ST_MASK				(1 << 0)
 
 /* PRCM_IRQENABLE_MPU, PM_IRQENABLE_DSP, PRCM_IRQENABLE_IVA shared bits */
-#define OMAP24XX_VOLTTRANS_EN				(1 << 2)
-#define OMAP24XX_WKUP2_EN				(1 << 1)
-#define OMAP24XX_WKUP1_EN				(1 << 0)
+#define OMAP24XX_VOLTTRANS_EN_MASK			(1 << 2)
+#define OMAP24XX_WKUP2_EN_MASK				(1 << 1)
+#define OMAP24XX_WKUP1_EN_MASK				(1 << 0)
 
 /* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */
 #define OMAP24XX_EN_MPU_SHIFT				1
@@ -40,16 +40,16 @@
  */
 #define OMAP24XX_MEMONSTATE_SHIFT			10
 #define OMAP24XX_MEMONSTATE_MASK			(0x3 << 10)
-#define OMAP24XX_MEMRETSTATE				(1 << 3)
+#define OMAP24XX_MEMRETSTATE_MASK			(1 << 3)
 
 /* PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM shared bits */
-#define OMAP24XX_FORCESTATE				(1 << 18)
+#define OMAP24XX_FORCESTATE_MASK			(1 << 18)
 
 /*
  * PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP,
  * PM_PWSTST_MDM shared bits
  */
-#define OMAP24XX_CLKACTIVITY				(1 << 19)
+#define OMAP24XX_CLKACTIVITY_MASK			(1 << 19)
 
 /* PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_DSP shared bits */
 #define OMAP24XX_LASTSTATEENTERED_SHIFT			4
@@ -71,26 +71,26 @@
 #define OMAP24XX_REV_MASK				(0xff << 0)
 
 /* PRCM_SYSCONFIG */
-#define OMAP24XX_AUTOIDLE				(1 << 0)
+#define OMAP24XX_AUTOIDLE_MASK				(1 << 0)
 
 /* PRCM_IRQSTATUS_MPU specific bits */
-#define OMAP2430_DPLL_RECAL_ST				(1 << 6)
-#define OMAP24XX_TRANSITION_ST				(1 << 5)
-#define OMAP24XX_EVGENOFF_ST				(1 << 4)
-#define OMAP24XX_EVGENON_ST				(1 << 3)
+#define OMAP2430_DPLL_RECAL_ST_MASK			(1 << 6)
+#define OMAP24XX_TRANSITION_ST_MASK			(1 << 5)
+#define OMAP24XX_EVGENOFF_ST_MASK			(1 << 4)
+#define OMAP24XX_EVGENON_ST_MASK			(1 << 3)
 
 /* PRCM_IRQENABLE_MPU specific bits */
-#define OMAP2430_DPLL_RECAL_EN				(1 << 6)
-#define OMAP24XX_TRANSITION_EN				(1 << 5)
-#define OMAP24XX_EVGENOFF_EN				(1 << 4)
-#define OMAP24XX_EVGENON_EN				(1 << 3)
+#define OMAP2430_DPLL_RECAL_EN_MASK			(1 << 6)
+#define OMAP24XX_TRANSITION_EN_MASK			(1 << 5)
+#define OMAP24XX_EVGENOFF_EN_MASK			(1 << 4)
+#define OMAP24XX_EVGENON_EN_MASK			(1 << 3)
 
 /* PRCM_VOLTCTRL */
-#define OMAP24XX_AUTO_EXTVOLT				(1 << 15)
-#define OMAP24XX_FORCE_EXTVOLT				(1 << 14)
+#define OMAP24XX_AUTO_EXTVOLT_MASK			(1 << 15)
+#define OMAP24XX_FORCE_EXTVOLT_MASK			(1 << 14)
 #define OMAP24XX_SETOFF_LEVEL_SHIFT			12
 #define OMAP24XX_SETOFF_LEVEL_MASK			(0x3 << 12)
-#define OMAP24XX_MEMRETCTRL				(1 << 8)
+#define OMAP24XX_MEMRETCTRL_MASK			(1 << 8)
 #define OMAP24XX_SETRET_LEVEL_SHIFT			6
 #define OMAP24XX_SETRET_LEVEL_MASK			(0x3 << 6)
 #define OMAP24XX_VOLT_LEVEL_SHIFT			0
@@ -104,13 +104,13 @@
 
 /* PRCM_CLKOUT_CTRL */
 #define OMAP2420_CLKOUT2_EN_SHIFT			15
-#define OMAP2420_CLKOUT2_EN				(1 << 15)
+#define OMAP2420_CLKOUT2_EN_MASK			(1 << 15)
 #define OMAP2420_CLKOUT2_DIV_SHIFT			11
 #define OMAP2420_CLKOUT2_DIV_MASK			(0x7 << 11)
 #define OMAP2420_CLKOUT2_SOURCE_SHIFT			8
 #define OMAP2420_CLKOUT2_SOURCE_MASK			(0x3 << 8)
 #define OMAP24XX_CLKOUT_EN_SHIFT			7
-#define OMAP24XX_CLKOUT_EN				(1 << 7)
+#define OMAP24XX_CLKOUT_EN_MASK				(1 << 7)
 #define OMAP24XX_CLKOUT_DIV_SHIFT			3
 #define OMAP24XX_CLKOUT_DIV_MASK			(0x7 << 3)
 #define OMAP24XX_CLKOUT_SOURCE_SHIFT			0
@@ -118,25 +118,25 @@
 
 /* PRCM_CLKEMUL_CTRL */
 #define OMAP24XX_EMULATION_EN_SHIFT			0
-#define OMAP24XX_EMULATION_EN				(1 << 0)
+#define OMAP24XX_EMULATION_EN_MASK			(1 << 0)
 
 /* PRCM_CLKCFG_CTRL */
-#define OMAP24XX_VALID_CONFIG				(1 << 0)
+#define OMAP24XX_VALID_CONFIG_MASK			(1 << 0)
 
 /* PRCM_CLKCFG_STATUS */
-#define OMAP24XX_CONFIG_STATUS				(1 << 0)
+#define OMAP24XX_CONFIG_STATUS_MASK			(1 << 0)
 
 /* PRCM_VOLTSETUP specific bits */
 
 /* PRCM_CLKSSETUP specific bits */
 
 /* PRCM_POLCTRL */
-#define OMAP2420_CLKOUT2_POL				(1 << 10)
-#define OMAP24XX_CLKOUT_POL				(1 << 9)
-#define OMAP24XX_CLKREQ_POL				(1 << 8)
-#define OMAP2430_USE_POWEROK				(1 << 2)
-#define OMAP2430_POWEROK_POL				(1 << 1)
-#define OMAP24XX_EXTVOL_POL				(1 << 0)
+#define OMAP2420_CLKOUT2_POL_MASK			(1 << 10)
+#define OMAP24XX_CLKOUT_POL_MASK			(1 << 9)
+#define OMAP24XX_CLKREQ_POL_MASK			(1 << 8)
+#define OMAP2430_USE_POWEROK_MASK			(1 << 2)
+#define OMAP2430_POWEROK_POL_MASK			(1 << 1)
+#define OMAP24XX_EXTVOL_POL_MASK			(1 << 0)
 
 /* RM_RSTST_MPU specific bits */
 /* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */
@@ -154,7 +154,7 @@
 /* PM_EVEGENOFFTIM_MPU specific bits */
 
 /* PM_PWSTCTRL_MPU specific bits */
-#define OMAP2430_FORCESTATE				(1 << 18)
+#define OMAP2430_FORCESTATE_MASK			(1 << 18)
 
 /* PM_PWSTST_MPU specific bits */
 /* INTRANSITION, CLKACTIVITY, POWERSTATE, MEMSTATEST are 2430 only */
@@ -168,21 +168,21 @@
 /* PM_WKST2_CORE specific bits */
 
 /* PM_WKDEP_CORE specific bits*/
-#define OMAP2430_PM_WKDEP_CORE_EN_MDM			(1 << 5)
-#define OMAP24XX_PM_WKDEP_CORE_EN_GFX			(1 << 3)
-#define OMAP24XX_PM_WKDEP_CORE_EN_DSP			(1 << 2)
+#define OMAP2430_PM_WKDEP_CORE_EN_MDM_MASK		(1 << 5)
+#define OMAP24XX_PM_WKDEP_CORE_EN_GFX_MASK		(1 << 3)
+#define OMAP24XX_PM_WKDEP_CORE_EN_DSP_MASK		(1 << 2)
 
 /* PM_PWSTCTRL_CORE specific bits */
-#define OMAP24XX_MEMORYCHANGE				(1 << 20)
+#define OMAP24XX_MEMORYCHANGE_MASK			(1 << 20)
 #define OMAP24XX_MEM3ONSTATE_SHIFT			14
 #define OMAP24XX_MEM3ONSTATE_MASK			(0x3 << 14)
 #define OMAP24XX_MEM2ONSTATE_SHIFT			12
 #define OMAP24XX_MEM2ONSTATE_MASK			(0x3 << 12)
 #define OMAP24XX_MEM1ONSTATE_SHIFT			10
 #define OMAP24XX_MEM1ONSTATE_MASK			(0x3 << 10)
-#define OMAP24XX_MEM3RETSTATE				(1 << 5)
-#define OMAP24XX_MEM2RETSTATE				(1 << 4)
-#define OMAP24XX_MEM1RETSTATE				(1 << 3)
+#define OMAP24XX_MEM3RETSTATE_MASK			(1 << 5)
+#define OMAP24XX_MEM2RETSTATE_MASK			(1 << 4)
+#define OMAP24XX_MEM1RETSTATE_MASK			(1 << 3)
 
 /* PM_PWSTST_CORE specific bits */
 #define OMAP24XX_MEM3STATEST_SHIFT			14
@@ -193,10 +193,10 @@
 #define OMAP24XX_MEM1STATEST_MASK			(0x3 << 10)
 
 /* RM_RSTCTRL_GFX */
-#define OMAP24XX_GFX_RST				(1 << 0)
+#define OMAP24XX_GFX_RST_MASK				(1 << 0)
 
 /* RM_RSTST_GFX specific bits */
-#define OMAP24XX_GFX_SW_RST				(1 << 4)
+#define OMAP24XX_GFX_SW_RST_MASK			(1 << 4)
 
 /* PM_PWSTCTRL_GFX specific bits */
 
@@ -209,25 +209,25 @@
 
 /* RM_RSTST_WKUP specific bits */
 /* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
-#define OMAP24XX_EXTWMPU_RST				(1 << 6)
-#define OMAP24XX_SECU_WD_RST				(1 << 5)
-#define OMAP24XX_MPU_WD_RST				(1 << 4)
-#define OMAP24XX_SECU_VIOL_RST				(1 << 3)
+#define OMAP24XX_EXTWMPU_RST_MASK			(1 << 6)
+#define OMAP24XX_SECU_WD_RST_MASK			(1 << 5)
+#define OMAP24XX_MPU_WD_RST_MASK			(1 << 4)
+#define OMAP24XX_SECU_VIOL_RST_MASK			(1 << 3)
 
 /* PM_WKEN_WKUP specific bits */
 
 /* PM_WKST_WKUP specific bits */
 
 /* RM_RSTCTRL_DSP */
-#define OMAP2420_RST_IVA				(1 << 8)
-#define OMAP24XX_RST2_DSP				(1 << 1)
-#define OMAP24XX_RST1_DSP				(1 << 0)
+#define OMAP2420_RST_IVA_MASK				(1 << 8)
+#define OMAP24XX_RST2_DSP_MASK				(1 << 1)
+#define OMAP24XX_RST1_DSP_MASK				(1 << 0)
 
 /* RM_RSTST_DSP specific bits */
 /* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" */
-#define OMAP2420_IVA_SW_RST				(1 << 8)
-#define OMAP24XX_DSP_SW_RST2				(1 << 5)
-#define OMAP24XX_DSP_SW_RST1				(1 << 4)
+#define OMAP2420_IVA_SW_RST_MASK			(1 << 8)
+#define OMAP24XX_DSP_SW_RST2_MASK			(1 << 5)
+#define OMAP24XX_DSP_SW_RST1_MASK			(1 << 4)
 
 /* PM_WKDEP_DSP specific bits */
 
@@ -235,7 +235,7 @@
 /* 2430 only: MEMONSTATE, MEMRETSTATE */
 #define OMAP2420_MEMIONSTATE_SHIFT			12
 #define OMAP2420_MEMIONSTATE_MASK			(0x3 << 12)
-#define OMAP2420_MEMIRETSTATE				(1 << 4)
+#define OMAP2420_MEMIRETSTATE_MASK			(1 << 4)
 
 /* PM_PWSTST_DSP specific bits */
 /* MEMSTATEST is 2430 only */
@@ -248,18 +248,18 @@
 
 /* RM_RSTCTRL_MDM */
 /* 2430 only */
-#define OMAP2430_PWRON1_MDM				(1 << 1)
-#define OMAP2430_RST1_MDM				(1 << 0)
+#define OMAP2430_PWRON1_MDM_MASK			(1 << 1)
+#define OMAP2430_RST1_MDM_MASK				(1 << 0)
 
 /* RM_RSTST_MDM specific bits */
 /* 2430 only */
-#define OMAP2430_MDM_SECU_VIOL				(1 << 6)
-#define OMAP2430_MDM_SW_PWRON1				(1 << 5)
-#define OMAP2430_MDM_SW_RST1				(1 << 4)
+#define OMAP2430_MDM_SECU_VIOL_MASK			(1 << 6)
+#define OMAP2430_MDM_SW_PWRON1_MASK			(1 << 5)
+#define OMAP2430_MDM_SW_RST1_MASK			(1 << 4)
 
 /* PM_WKEN_MDM */
 /* 2430 only */
-#define OMAP2430_PM_WKEN_MDM_EN_MDM			(1 << 0)
+#define OMAP2430_PM_WKEN_MDM_EN_MDM_MASK		(1 << 0)
 
 /* PM_WKST_MDM specific bits */
 /* 2430 only */
@@ -269,7 +269,7 @@
 
 /* PM_PWSTCTRL_MDM specific bits */
 /* 2430 only */
-#define OMAP2430_KILLDOMAINWKUP				(1 << 19)
+#define OMAP2430_KILLDOMAINWKUP_MASK			(1 << 19)
 
 /* PM_PWSTST_MDM specific bits */
 /* 2430 only */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/prm-regbits-34xx.h linux-libre-2.6.35-gnu/arch/arm/mach-omap2/prm-regbits-34xx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/prm-regbits-34xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/prm-regbits-34xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -35,10 +35,10 @@
 #define OMAP3430_ERRORGAIN_MASK				(0xff << 16)
 #define OMAP3430_INITVOLTAGE_SHIFT			8
 #define OMAP3430_INITVOLTAGE_MASK			(0xff << 8)
-#define OMAP3430_TIMEOUTEN				(1 << 3)
-#define OMAP3430_INITVDD				(1 << 2)
-#define OMAP3430_FORCEUPDATE				(1 << 1)
-#define OMAP3430_VPENABLE				(1 << 0)
+#define OMAP3430_TIMEOUTEN_MASK				(1 << 3)
+#define OMAP3430_INITVDD_MASK				(1 << 2)
+#define OMAP3430_FORCEUPDATE_MASK			(1 << 1)
+#define OMAP3430_VPENABLE_MASK				(1 << 0)
 
 /* PRM_VP1_VSTEPMIN, PRM_VP2_VSTEPMIN shared bits */
 #define OMAP3430_SMPSWAITTIMEMIN_SHIFT			8
@@ -65,53 +65,53 @@
 #define OMAP3430_VPVOLTAGE_MASK				(0xff << 0)
 
 /* PRM_VP1_STATUS, PRM_VP2_STATUS shared bits */
-#define OMAP3430_VPINIDLE				(1 << 0)
+#define OMAP3430_VPINIDLE_MASK				(1 << 0)
 
 /* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */
 #define OMAP3430_EN_PER_SHIFT				7
 #define OMAP3430_EN_PER_MASK				(1 << 7)
 
 /* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */
-#define OMAP3430_MEMORYCHANGE				(1 << 3)
+#define OMAP3430_MEMORYCHANGE_MASK			(1 << 3)
 
 /* PM_PWSTST_IVA2, PM_PWSTST_CORE shared bits */
-#define OMAP3430_LOGICSTATEST				(1 << 2)
+#define OMAP3430_LOGICSTATEST_MASK			(1 << 2)
 
 /* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */
-#define OMAP3430_LASTLOGICSTATEENTERED			(1 << 2)
+#define OMAP3430_LASTLOGICSTATEENTERED_MASK		(1 << 2)
 
 /*
  * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE,
  * PM_PREPWSTST_GFX, PM_PREPWSTST_DSS, PM_PREPWSTST_CAM,
  * PM_PREPWSTST_PER, PM_PREPWSTST_NEON shared bits
  */
-#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT			0
-#define OMAP3430_LASTPOWERSTATEENTERED_MASK			(0x3 << 0)
+#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT		0
+#define OMAP3430_LASTPOWERSTATEENTERED_MASK		(0x3 << 0)
 
 /* PRM_IRQSTATUS_IVA2, PRM_IRQSTATUS_MPU shared bits */
-#define OMAP3430_WKUP_ST				(1 << 0)
+#define OMAP3430_WKUP_ST_MASK				(1 << 0)
 
 /* PRM_IRQENABLE_IVA2, PRM_IRQENABLE_MPU shared bits */
-#define OMAP3430_WKUP_EN					(1 << 0)
+#define OMAP3430_WKUP_EN_MASK				(1 << 0)
 
 /* PM_MPUGRPSEL1_CORE, PM_IVA2GRPSEL1_CORE shared bits */
-#define OMAP3430_GRPSEL_MMC2				(1 << 25)
-#define OMAP3430_GRPSEL_MMC1				(1 << 24)
-#define OMAP3430_GRPSEL_MCSPI4				(1 << 21)
-#define OMAP3430_GRPSEL_MCSPI3				(1 << 20)
-#define OMAP3430_GRPSEL_MCSPI2				(1 << 19)
-#define OMAP3430_GRPSEL_MCSPI1				(1 << 18)
-#define OMAP3430_GRPSEL_I2C3				(1 << 17)
-#define OMAP3430_GRPSEL_I2C2				(1 << 16)
-#define OMAP3430_GRPSEL_I2C1				(1 << 15)
-#define OMAP3430_GRPSEL_UART2				(1 << 14)
-#define OMAP3430_GRPSEL_UART1				(1 << 13)
-#define OMAP3430_GRPSEL_GPT11				(1 << 12)
-#define OMAP3430_GRPSEL_GPT10				(1 << 11)
-#define OMAP3430_GRPSEL_MCBSP5				(1 << 10)
-#define OMAP3430_GRPSEL_MCBSP1				(1 << 9)
-#define OMAP3430_GRPSEL_HSOTGUSB			(1 << 4)
-#define OMAP3430_GRPSEL_D2D				(1 << 3)
+#define OMAP3430_GRPSEL_MMC2_MASK			(1 << 25)
+#define OMAP3430_GRPSEL_MMC1_MASK			(1 << 24)
+#define OMAP3430_GRPSEL_MCSPI4_MASK			(1 << 21)
+#define OMAP3430_GRPSEL_MCSPI3_MASK			(1 << 20)
+#define OMAP3430_GRPSEL_MCSPI2_MASK			(1 << 19)
+#define OMAP3430_GRPSEL_MCSPI1_MASK			(1 << 18)
+#define OMAP3430_GRPSEL_I2C3_MASK			(1 << 17)
+#define OMAP3430_GRPSEL_I2C2_MASK			(1 << 16)
+#define OMAP3430_GRPSEL_I2C1_MASK			(1 << 15)
+#define OMAP3430_GRPSEL_UART2_MASK			(1 << 14)
+#define OMAP3430_GRPSEL_UART1_MASK			(1 << 13)
+#define OMAP3430_GRPSEL_GPT11_MASK			(1 << 12)
+#define OMAP3430_GRPSEL_GPT10_MASK			(1 << 11)
+#define OMAP3430_GRPSEL_MCBSP5_MASK			(1 << 10)
+#define OMAP3430_GRPSEL_MCBSP1_MASK			(1 << 9)
+#define OMAP3430_GRPSEL_HSOTGUSB_MASK			(1 << 4)
+#define OMAP3430_GRPSEL_D2D_MASK			(1 << 3)
 
 /*
  * PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM,
@@ -119,49 +119,49 @@
  */
 #define OMAP3430_MEMONSTATE_SHIFT			16
 #define OMAP3430_MEMONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_MEMRETSTATE				(1 << 8)
+#define OMAP3430_MEMRETSTATE_MASK			(1 << 8)
 
 /* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
-#define OMAP3430_GRPSEL_GPIO6				(1 << 17)
-#define OMAP3430_GRPSEL_GPIO5				(1 << 16)
-#define OMAP3430_GRPSEL_GPIO4				(1 << 15)
-#define OMAP3430_GRPSEL_GPIO3				(1 << 14)
-#define OMAP3430_GRPSEL_GPIO2				(1 << 13)
-#define OMAP3430_GRPSEL_UART3				(1 << 11)
-#define OMAP3430_GRPSEL_GPT9				(1 << 10)
-#define OMAP3430_GRPSEL_GPT8				(1 << 9)
-#define OMAP3430_GRPSEL_GPT7				(1 << 8)
-#define OMAP3430_GRPSEL_GPT6				(1 << 7)
-#define OMAP3430_GRPSEL_GPT5				(1 << 6)
-#define OMAP3430_GRPSEL_GPT4				(1 << 5)
-#define OMAP3430_GRPSEL_GPT3				(1 << 4)
-#define OMAP3430_GRPSEL_GPT2				(1 << 3)
-#define OMAP3430_GRPSEL_MCBSP4				(1 << 2)
-#define OMAP3430_GRPSEL_MCBSP3				(1 << 1)
-#define OMAP3430_GRPSEL_MCBSP2				(1 << 0)
+#define OMAP3430_GRPSEL_GPIO6_MASK			(1 << 17)
+#define OMAP3430_GRPSEL_GPIO5_MASK			(1 << 16)
+#define OMAP3430_GRPSEL_GPIO4_MASK			(1 << 15)
+#define OMAP3430_GRPSEL_GPIO3_MASK			(1 << 14)
+#define OMAP3430_GRPSEL_GPIO2_MASK			(1 << 13)
+#define OMAP3430_GRPSEL_UART3_MASK			(1 << 11)
+#define OMAP3430_GRPSEL_GPT9_MASK			(1 << 10)
+#define OMAP3430_GRPSEL_GPT8_MASK			(1 << 9)
+#define OMAP3430_GRPSEL_GPT7_MASK			(1 << 8)
+#define OMAP3430_GRPSEL_GPT6_MASK			(1 << 7)
+#define OMAP3430_GRPSEL_GPT5_MASK			(1 << 6)
+#define OMAP3430_GRPSEL_GPT4_MASK			(1 << 5)
+#define OMAP3430_GRPSEL_GPT3_MASK			(1 << 4)
+#define OMAP3430_GRPSEL_GPT2_MASK			(1 << 3)
+#define OMAP3430_GRPSEL_MCBSP4_MASK			(1 << 2)
+#define OMAP3430_GRPSEL_MCBSP3_MASK			(1 << 1)
+#define OMAP3430_GRPSEL_MCBSP2_MASK			(1 << 0)
 
 /* PM_MPUGRPSEL_WKUP, PM_IVA2GRPSEL_WKUP shared bits */
-#define OMAP3430_GRPSEL_IO				(1 << 8)
-#define OMAP3430_GRPSEL_SR2				(1 << 7)
-#define OMAP3430_GRPSEL_SR1				(1 << 6)
-#define OMAP3430_GRPSEL_GPIO1				(1 << 3)
-#define OMAP3430_GRPSEL_GPT12				(1 << 1)
-#define OMAP3430_GRPSEL_GPT1				(1 << 0)
+#define OMAP3430_GRPSEL_IO_MASK				(1 << 8)
+#define OMAP3430_GRPSEL_SR2_MASK			(1 << 7)
+#define OMAP3430_GRPSEL_SR1_MASK			(1 << 6)
+#define OMAP3430_GRPSEL_GPIO1_MASK			(1 << 3)
+#define OMAP3430_GRPSEL_GPT12_MASK			(1 << 1)
+#define OMAP3430_GRPSEL_GPT1_MASK			(1 << 0)
 
 /* Bits specific to each register */
 
 /* RM_RSTCTRL_IVA2 */
-#define OMAP3430_RST3_IVA2				(1 << 2)
-#define OMAP3430_RST2_IVA2				(1 << 1)
-#define OMAP3430_RST1_IVA2				(1 << 0)
+#define OMAP3430_RST3_IVA2_MASK				(1 << 2)
+#define OMAP3430_RST2_IVA2_MASK				(1 << 1)
+#define OMAP3430_RST1_IVA2_MASK				(1 << 0)
 
 /* RM_RSTST_IVA2 specific bits */
-#define OMAP3430_EMULATION_VSEQ_RST			(1 << 13)
-#define OMAP3430_EMULATION_VHWA_RST			(1 << 12)
-#define OMAP3430_EMULATION_IVA2_RST			(1 << 11)
-#define OMAP3430_IVA2_SW_RST3				(1 << 10)
-#define OMAP3430_IVA2_SW_RST2				(1 << 9)
-#define OMAP3430_IVA2_SW_RST1				(1 << 8)
+#define OMAP3430_EMULATION_VSEQ_RST_MASK		(1 << 13)
+#define OMAP3430_EMULATION_VHWA_RST_MASK		(1 << 12)
+#define OMAP3430_EMULATION_IVA2_RST_MASK		(1 << 11)
+#define OMAP3430_IVA2_SW_RST3_MASK			(1 << 10)
+#define OMAP3430_IVA2_SW_RST2_MASK			(1 << 9)
+#define OMAP3430_IVA2_SW_RST1_MASK			(1 << 8)
 
 /* PM_WKDEP_IVA2 specific bits */
 
@@ -174,10 +174,10 @@
 #define OMAP3430_L1FLATMEMONSTATE_MASK			(0x3 << 18)
 #define OMAP3430_SHAREDL1CACHEFLATONSTATE_SHIFT		16
 #define OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK		(0x3 << 16)
-#define OMAP3430_L2FLATMEMRETSTATE			(1 << 11)
-#define OMAP3430_SHAREDL2CACHEFLATRETSTATE		(1 << 10)
-#define OMAP3430_L1FLATMEMRETSTATE			(1 << 9)
-#define OMAP3430_SHAREDL1CACHEFLATRETSTATE		(1 << 8)
+#define OMAP3430_L2FLATMEMRETSTATE_MASK			(1 << 11)
+#define OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK		(1 << 10)
+#define OMAP3430_L1FLATMEMRETSTATE_MASK			(1 << 9)
+#define OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK		(1 << 8)
 
 /* PM_PWSTST_IVA2 specific bits */
 #define OMAP3430_L2FLATMEMSTATEST_SHIFT			10
@@ -200,12 +200,12 @@
 #define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_MASK		(0x3 << 4)
 
 /* PRM_IRQSTATUS_IVA2 specific bits */
-#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST	(1 << 2)
-#define OMAP3430_FORCEWKUP_ST				(1 << 1)
+#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST_MASK	(1 << 2)
+#define OMAP3430_FORCEWKUP_ST_MASK			(1 << 1)
 
 /* PRM_IRQENABLE_IVA2 specific bits */
-#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN		(1 << 2)
-#define OMAP3430_FORCEWKUP_EN					(1 << 1)
+#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN_MASK	(1 << 2)
+#define OMAP3430_FORCEWKUP_EN_MASK				(1 << 1)
 
 /* PRM_REVISION specific bits */
 
@@ -213,70 +213,70 @@
 
 /* PRM_IRQSTATUS_MPU specific bits */
 #define OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT		25
-#define OMAP3430ES2_SND_PERIPH_DPLL_ST			(1 << 25)
-#define OMAP3430_VC_TIMEOUTERR_ST			(1 << 24)
-#define OMAP3430_VC_RAERR_ST				(1 << 23)
-#define OMAP3430_VC_SAERR_ST				(1 << 22)
-#define OMAP3430_VP2_TRANXDONE_ST			(1 << 21)
-#define OMAP3430_VP2_EQVALUE_ST				(1 << 20)
-#define OMAP3430_VP2_NOSMPSACK_ST			(1 << 19)
-#define OMAP3430_VP2_MAXVDD_ST				(1 << 18)
-#define OMAP3430_VP2_MINVDD_ST				(1 << 17)
-#define OMAP3430_VP2_OPPCHANGEDONE_ST			(1 << 16)
-#define OMAP3430_VP1_TRANXDONE_ST			(1 << 15)
-#define OMAP3430_VP1_EQVALUE_ST				(1 << 14)
-#define OMAP3430_VP1_NOSMPSACK_ST			(1 << 13)
-#define OMAP3430_VP1_MAXVDD_ST				(1 << 12)
-#define OMAP3430_VP1_MINVDD_ST				(1 << 11)
-#define OMAP3430_VP1_OPPCHANGEDONE_ST			(1 << 10)
-#define OMAP3430_IO_ST					(1 << 9)
-#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST		(1 << 8)
+#define OMAP3430ES2_SND_PERIPH_DPLL_ST_MASK		(1 << 25)
+#define OMAP3430_VC_TIMEOUTERR_ST_MASK			(1 << 24)
+#define OMAP3430_VC_RAERR_ST_MASK			(1 << 23)
+#define OMAP3430_VC_SAERR_ST_MASK			(1 << 22)
+#define OMAP3430_VP2_TRANXDONE_ST_MASK			(1 << 21)
+#define OMAP3430_VP2_EQVALUE_ST_MASK			(1 << 20)
+#define OMAP3430_VP2_NOSMPSACK_ST_MASK			(1 << 19)
+#define OMAP3430_VP2_MAXVDD_ST_MASK			(1 << 18)
+#define OMAP3430_VP2_MINVDD_ST_MASK			(1 << 17)
+#define OMAP3430_VP2_OPPCHANGEDONE_ST_MASK		(1 << 16)
+#define OMAP3430_VP1_TRANXDONE_ST_MASK			(1 << 15)
+#define OMAP3430_VP1_EQVALUE_ST_MASK			(1 << 14)
+#define OMAP3430_VP1_NOSMPSACK_ST_MASK			(1 << 13)
+#define OMAP3430_VP1_MAXVDD_ST_MASK			(1 << 12)
+#define OMAP3430_VP1_MINVDD_ST_MASK			(1 << 11)
+#define OMAP3430_VP1_OPPCHANGEDONE_ST_MASK		(1 << 10)
+#define OMAP3430_IO_ST_MASK				(1 << 9)
+#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_MASK	(1 << 8)
 #define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT	8
-#define OMAP3430_MPU_DPLL_ST				(1 << 7)
+#define OMAP3430_MPU_DPLL_ST_MASK			(1 << 7)
 #define OMAP3430_MPU_DPLL_ST_SHIFT			7
-#define OMAP3430_PERIPH_DPLL_ST				(1 << 6)
+#define OMAP3430_PERIPH_DPLL_ST_MASK			(1 << 6)
 #define OMAP3430_PERIPH_DPLL_ST_SHIFT			6
-#define OMAP3430_CORE_DPLL_ST				(1 << 5)
+#define OMAP3430_CORE_DPLL_ST_MASK			(1 << 5)
 #define OMAP3430_CORE_DPLL_ST_SHIFT			5
-#define OMAP3430_TRANSITION_ST				(1 << 4)
-#define OMAP3430_EVGENOFF_ST				(1 << 3)
-#define OMAP3430_EVGENON_ST				(1 << 2)
-#define OMAP3430_FS_USB_WKUP_ST				(1 << 1)
+#define OMAP3430_TRANSITION_ST_MASK			(1 << 4)
+#define OMAP3430_EVGENOFF_ST_MASK			(1 << 3)
+#define OMAP3430_EVGENON_ST_MASK			(1 << 2)
+#define OMAP3430_FS_USB_WKUP_ST_MASK			(1 << 1)
 
 /* PRM_IRQENABLE_MPU specific bits */
 #define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT		25
-#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN			(1 << 25)
-#define OMAP3430_VC_TIMEOUTERR_EN				(1 << 24)
-#define OMAP3430_VC_RAERR_EN					(1 << 23)
-#define OMAP3430_VC_SAERR_EN					(1 << 22)
-#define OMAP3430_VP2_TRANXDONE_EN				(1 << 21)
-#define OMAP3430_VP2_EQVALUE_EN					(1 << 20)
-#define OMAP3430_VP2_NOSMPSACK_EN				(1 << 19)
-#define OMAP3430_VP2_MAXVDD_EN					(1 << 18)
-#define OMAP3430_VP2_MINVDD_EN					(1 << 17)
-#define OMAP3430_VP2_OPPCHANGEDONE_EN				(1 << 16)
-#define OMAP3430_VP1_TRANXDONE_EN				(1 << 15)
-#define OMAP3430_VP1_EQVALUE_EN					(1 << 14)
-#define OMAP3430_VP1_NOSMPSACK_EN				(1 << 13)
-#define OMAP3430_VP1_MAXVDD_EN					(1 << 12)
-#define OMAP3430_VP1_MINVDD_EN					(1 << 11)
-#define OMAP3430_VP1_OPPCHANGEDONE_EN				(1 << 10)
-#define OMAP3430_IO_EN						(1 << 9)
-#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN		(1 << 8)
+#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_MASK		(1 << 25)
+#define OMAP3430_VC_TIMEOUTERR_EN_MASK				(1 << 24)
+#define OMAP3430_VC_RAERR_EN_MASK				(1 << 23)
+#define OMAP3430_VC_SAERR_EN_MASK				(1 << 22)
+#define OMAP3430_VP2_TRANXDONE_EN_MASK				(1 << 21)
+#define OMAP3430_VP2_EQVALUE_EN_MASK				(1 << 20)
+#define OMAP3430_VP2_NOSMPSACK_EN_MASK				(1 << 19)
+#define OMAP3430_VP2_MAXVDD_EN_MASK				(1 << 18)
+#define OMAP3430_VP2_MINVDD_EN_MASK				(1 << 17)
+#define OMAP3430_VP2_OPPCHANGEDONE_EN_MASK			(1 << 16)
+#define OMAP3430_VP1_TRANXDONE_EN_MASK				(1 << 15)
+#define OMAP3430_VP1_EQVALUE_EN_MASK				(1 << 14)
+#define OMAP3430_VP1_NOSMPSACK_EN_MASK				(1 << 13)
+#define OMAP3430_VP1_MAXVDD_EN_MASK				(1 << 12)
+#define OMAP3430_VP1_MINVDD_EN_MASK				(1 << 11)
+#define OMAP3430_VP1_OPPCHANGEDONE_EN_MASK			(1 << 10)
+#define OMAP3430_IO_EN_MASK					(1 << 9)
+#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_MASK	(1 << 8)
 #define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT	8
-#define OMAP3430_MPU_DPLL_RECAL_EN				(1 << 7)
+#define OMAP3430_MPU_DPLL_RECAL_EN_MASK				(1 << 7)
 #define OMAP3430_MPU_DPLL_RECAL_EN_SHIFT			7
-#define OMAP3430_PERIPH_DPLL_RECAL_EN				(1 << 6)
+#define OMAP3430_PERIPH_DPLL_RECAL_EN_MASK			(1 << 6)
 #define OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT			6
-#define OMAP3430_CORE_DPLL_RECAL_EN				(1 << 5)
+#define OMAP3430_CORE_DPLL_RECAL_EN_MASK			(1 << 5)
 #define OMAP3430_CORE_DPLL_RECAL_EN_SHIFT			5
-#define OMAP3430_TRANSITION_EN					(1 << 4)
-#define OMAP3430_EVGENOFF_EN					(1 << 3)
-#define OMAP3430_EVGENON_EN					(1 << 2)
-#define OMAP3430_FS_USB_WKUP_EN					(1 << 1)
+#define OMAP3430_TRANSITION_EN_MASK				(1 << 4)
+#define OMAP3430_EVGENOFF_EN_MASK				(1 << 3)
+#define OMAP3430_EVGENON_EN_MASK				(1 << 2)
+#define OMAP3430_FS_USB_WKUP_EN_MASK				(1 << 1)
 
 /* RM_RSTST_MPU specific bits */
-#define OMAP3430_EMULATION_MPU_RST			(1 << 11)
+#define OMAP3430_EMULATION_MPU_RST_MASK			(1 << 11)
 
 /* PM_WKDEP_MPU specific bits */
 #define OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT		5
@@ -289,7 +289,7 @@
 #define OMAP3430_OFFLOADMODE_MASK			(0x3 << 3)
 #define OMAP3430_ONLOADMODE_SHIFT			1
 #define OMAP3430_ONLOADMODE_MASK			(0x3 << 1)
-#define OMAP3430_ENABLE					(1 << 0)
+#define OMAP3430_ENABLE_MASK				(1 << 0)
 
 /* PM_EVGENONTIM_MPU */
 #define OMAP3430_ONTIMEVAL_SHIFT			0
@@ -302,32 +302,32 @@
 /* PM_PWSTCTRL_MPU specific bits */
 #define OMAP3430_L2CACHEONSTATE_SHIFT			16
 #define OMAP3430_L2CACHEONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_L2CACHERETSTATE			(1 << 8)
-#define OMAP3430_LOGICL1CACHERETSTATE			(1 << 2)
+#define OMAP3430_L2CACHERETSTATE_MASK			(1 << 8)
+#define OMAP3430_LOGICL1CACHERETSTATE_MASK		(1 << 2)
 
 /* PM_PWSTST_MPU specific bits */
 #define OMAP3430_L2CACHESTATEST_SHIFT			6
 #define OMAP3430_L2CACHESTATEST_MASK			(0x3 << 6)
-#define OMAP3430_LOGICL1CACHESTATEST			(1 << 2)
+#define OMAP3430_LOGICL1CACHESTATEST_MASK		(1 << 2)
 
 /* PM_PREPWSTST_MPU specific bits */
 #define OMAP3430_LASTL2CACHESTATEENTERED_SHIFT		6
 #define OMAP3430_LASTL2CACHESTATEENTERED_MASK		(0x3 << 6)
-#define OMAP3430_LASTLOGICL1CACHESTATEENTERED		(1 << 2)
+#define OMAP3430_LASTLOGICL1CACHESTATEENTERED_MASK	(1 << 2)
 
 /* RM_RSTCTRL_CORE */
-#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON		(1 << 1)
-#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST			(1 << 0)
+#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK		(1 << 1)
+#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK		(1 << 0)
 
 /* RM_RSTST_CORE specific bits */
-#define OMAP3430_MODEM_SECURITY_VIOL_RST		(1 << 10)
-#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON	(1 << 9)
-#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST		(1 << 8)
+#define OMAP3430_MODEM_SECURITY_VIOL_RST_MASK		(1 << 10)
+#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON_MASK	(1 << 9)
+#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST_MASK	(1 << 8)
 
 /* PM_WKEN1_CORE specific bits */
 
 /* PM_MPUGRPSEL1_CORE specific bits */
-#define OMAP3430_GRPSEL_FSHOSTUSB			(1 << 5)
+#define OMAP3430_GRPSEL_FSHOSTUSB_MASK			(1 << 5)
 
 /* PM_IVA2GRPSEL1_CORE specific bits */
 
@@ -338,8 +338,8 @@
 #define OMAP3430_MEM2ONSTATE_MASK			(0x3 << 18)
 #define OMAP3430_MEM1ONSTATE_SHIFT			16
 #define OMAP3430_MEM1ONSTATE_MASK			(0x3 << 16)
-#define OMAP3430_MEM2RETSTATE				(1 << 9)
-#define OMAP3430_MEM1RETSTATE				(1 << 8)
+#define OMAP3430_MEM2RETSTATE_MASK			(1 << 9)
+#define OMAP3430_MEM1RETSTATE_MASK			(1 << 8)
 
 /* PM_PWSTST_CORE specific bits */
 #define OMAP3430_MEM2STATEST_SHIFT			6
@@ -356,7 +356,7 @@
 /* RM_RSTST_GFX specific bits */
 
 /* PM_WKDEP_GFX specific bits */
-#define OMAP3430_PM_WKDEP_GFX_EN_IVA2			(1 << 2)
+#define OMAP3430_PM_WKDEP_GFX_EN_IVA2_MASK		(1 << 2)
 
 /* PM_PWSTCTRL_GFX specific bits */
 
@@ -365,33 +365,33 @@
 /* PM_PREPWSTST_GFX specific bits */
 
 /* PM_WKEN_WKUP specific bits */
-#define OMAP3430_EN_IO_CHAIN				(1 << 16)
-#define OMAP3430_EN_IO					(1 << 8)
-#define OMAP3430_EN_GPIO1				(1 << 3)
+#define OMAP3430_EN_IO_CHAIN_MASK			(1 << 16)
+#define OMAP3430_EN_IO_MASK				(1 << 8)
+#define OMAP3430_EN_GPIO1_MASK				(1 << 3)
 
 /* PM_MPUGRPSEL_WKUP specific bits */
 
 /* PM_IVA2GRPSEL_WKUP specific bits */
 
 /* PM_WKST_WKUP specific bits */
-#define OMAP3430_ST_IO_CHAIN				(1 << 16)
-#define OMAP3430_ST_IO					(1 << 8)
+#define OMAP3430_ST_IO_CHAIN_MASK			(1 << 16)
+#define OMAP3430_ST_IO_MASK				(1 << 8)
 
 /* PRM_CLKSEL */
 #define OMAP3430_SYS_CLKIN_SEL_SHIFT			0
 #define OMAP3430_SYS_CLKIN_SEL_MASK			(0x7 << 0)
 
 /* PRM_CLKOUT_CTRL */
-#define OMAP3430_CLKOUT_EN				(1 << 7)
+#define OMAP3430_CLKOUT_EN_MASK				(1 << 7)
 #define OMAP3430_CLKOUT_EN_SHIFT			7
 
 /* RM_RSTST_DSS specific bits */
 
 /* PM_WKEN_DSS */
-#define OMAP3430_PM_WKEN_DSS_EN_DSS			(1 << 0)
+#define OMAP3430_PM_WKEN_DSS_EN_DSS_MASK		(1 << 0)
 
 /* PM_WKDEP_DSS specific bits */
-#define OMAP3430_PM_WKDEP_DSS_EN_IVA2			(1 << 2)
+#define OMAP3430_PM_WKDEP_DSS_EN_IVA2_MASK		(1 << 2)
 
 /* PM_PWSTCTRL_DSS specific bits */
 
@@ -402,7 +402,7 @@
 /* RM_RSTST_CAM specific bits */
 
 /* PM_WKDEP_CAM specific bits */
-#define OMAP3430_PM_WKDEP_CAM_EN_IVA2			(1 << 2)
+#define OMAP3430_PM_WKDEP_CAM_EN_IVA2_MASK		(1 << 2)
 
 /* PM_PWSTCTRL_CAM specific bits */
 
@@ -424,7 +424,7 @@
 /* PM_WKST_PER specific bits */
 
 /* PM_WKDEP_PER specific bits */
-#define OMAP3430_PM_WKDEP_PER_EN_IVA2			(1 << 2)
+#define OMAP3430_PM_WKDEP_PER_EN_IVA2_MASK		(1 << 2)
 
 /* PM_PWSTCTRL_PER specific bits */
 
@@ -467,26 +467,26 @@
 /* PRM_VC_CMD_VAL_1 specific bits */
 
 /* PRM_VC_CH_CONF */
-#define OMAP3430_CMD1					(1 << 20)
-#define OMAP3430_RACEN1					(1 << 19)
-#define OMAP3430_RAC1					(1 << 18)
-#define OMAP3430_RAV1					(1 << 17)
-#define OMAP3430_PRM_VC_CH_CONF_SA1			(1 << 16)
-#define OMAP3430_CMD0					(1 << 4)
-#define OMAP3430_RACEN0					(1 << 3)
-#define OMAP3430_RAC0					(1 << 2)
-#define OMAP3430_RAV0					(1 << 1)
-#define OMAP3430_PRM_VC_CH_CONF_SA0			(1 << 0)
+#define OMAP3430_CMD1_MASK				(1 << 20)
+#define OMAP3430_RACEN1_MASK				(1 << 19)
+#define OMAP3430_RAC1_MASK				(1 << 18)
+#define OMAP3430_RAV1_MASK				(1 << 17)
+#define OMAP3430_PRM_VC_CH_CONF_SA1_MASK		(1 << 16)
+#define OMAP3430_CMD0_MASK				(1 << 4)
+#define OMAP3430_RACEN0_MASK				(1 << 3)
+#define OMAP3430_RAC0_MASK				(1 << 2)
+#define OMAP3430_RAV0_MASK				(1 << 1)
+#define OMAP3430_PRM_VC_CH_CONF_SA0_MASK		(1 << 0)
 
 /* PRM_VC_I2C_CFG */
-#define OMAP3430_HSMASTER				(1 << 5)
-#define OMAP3430_SREN					(1 << 4)
-#define OMAP3430_HSEN					(1 << 3)
+#define OMAP3430_HSMASTER_MASK				(1 << 5)
+#define OMAP3430_SREN_MASK				(1 << 4)
+#define OMAP3430_HSEN_MASK				(1 << 3)
 #define OMAP3430_MCODE_SHIFT				0
 #define OMAP3430_MCODE_MASK				(0x7 << 0)
 
 /* PRM_VC_BYPASS_VAL */
-#define OMAP3430_VALID					(1 << 24)
+#define OMAP3430_VALID_MASK				(1 << 24)
 #define OMAP3430_DATA_SHIFT				16
 #define OMAP3430_DATA_MASK				(0xff << 16)
 #define OMAP3430_REGADDR_SHIFT				8
@@ -495,8 +495,8 @@
 #define OMAP3430_SLAVEADDR_MASK				(0x7f << 0)
 
 /* PRM_RSTCTRL */
-#define OMAP3430_RST_DPLL3				(1 << 2)
-#define OMAP3430_RST_GS					(1 << 1)
+#define OMAP3430_RST_DPLL3_MASK				(1 << 2)
+#define OMAP3430_RST_GS_MASK				(1 << 1)
 
 /* PRM_RSTTIME */
 #define OMAP3430_RSTTIME2_SHIFT				8
@@ -505,23 +505,23 @@
 #define OMAP3430_RSTTIME1_MASK				(0xff << 0)
 
 /* PRM_RSTST */
-#define OMAP3430_ICECRUSHER_RST				(1 << 10)
-#define OMAP3430_ICEPICK_RST				(1 << 9)
-#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST		(1 << 8)
-#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST		(1 << 7)
-#define OMAP3430_EXTERNAL_WARM_RST			(1 << 6)
-#define OMAP3430_SECURE_WD_RST				(1 << 5)
-#define OMAP3430_MPU_WD_RST				(1 << 4)
-#define OMAP3430_SECURITY_VIOL_RST			(1 << 3)
-#define OMAP3430_GLOBAL_SW_RST				(1 << 1)
-#define OMAP3430_GLOBAL_COLD_RST			(1 << 0)
+#define OMAP3430_ICECRUSHER_RST_MASK			(1 << 10)
+#define OMAP3430_ICEPICK_RST_MASK			(1 << 9)
+#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST_MASK		(1 << 8)
+#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST_MASK		(1 << 7)
+#define OMAP3430_EXTERNAL_WARM_RST_MASK			(1 << 6)
+#define OMAP3430_SECURE_WD_RST_MASK			(1 << 5)
+#define OMAP3430_MPU_WD_RST_MASK			(1 << 4)
+#define OMAP3430_SECURITY_VIOL_RST_MASK			(1 << 3)
+#define OMAP3430_GLOBAL_SW_RST_MASK			(1 << 1)
+#define OMAP3430_GLOBAL_COLD_RST_MASK			(1 << 0)
 
 /* PRM_VOLTCTRL */
-#define OMAP3430_SEL_VMODE				(1 << 4)
-#define OMAP3430_SEL_OFF				(1 << 3)
-#define OMAP3430_AUTO_OFF				(1 << 2)
-#define OMAP3430_AUTO_RET				(1 << 1)
-#define OMAP3430_AUTO_SLEEP				(1 << 0)
+#define OMAP3430_SEL_VMODE_MASK				(1 << 4)
+#define OMAP3430_SEL_OFF_MASK				(1 << 3)
+#define OMAP3430_AUTO_OFF_MASK				(1 << 2)
+#define OMAP3430_AUTO_RET_MASK				(1 << 1)
+#define OMAP3430_AUTO_SLEEP_MASK			(1 << 0)
 
 /* PRM_SRAM_PCHARGE */
 #define OMAP3430_PCHARGE_TIME_SHIFT			0
@@ -550,10 +550,10 @@
 #define OMAP3430_SETUP_TIME_MASK			(0xffff << 0)
 
 /* PRM_POLCTRL */
-#define OMAP3430_OFFMODE_POL				(1 << 3)
-#define OMAP3430_CLKOUT_POL				(1 << 2)
-#define OMAP3430_CLKREQ_POL				(1 << 1)
-#define OMAP3430_EXTVOL_POL				(1 << 0)
+#define OMAP3430_OFFMODE_POL_MASK			(1 << 3)
+#define OMAP3430_CLKOUT_POL_MASK			(1 << 2)
+#define OMAP3430_CLKREQ_POL_MASK			(1 << 1)
+#define OMAP3430_EXTVOL_POL_MASK			(1 << 0)
 
 /* PRM_VOLTSETUP2 */
 #define OMAP3430_OFFMODESETUPTIME_SHIFT			0
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/usb-ehci.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/usb-ehci.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/usb-ehci.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/usb-ehci.c	2010-08-01 18:11:14.000000000 -0400
@@ -20,6 +20,8 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
 #include <asm/io.h>
 #include <plat/mux.h>
 
@@ -236,3 +238,158 @@
 
 #endif /* CONFIG_USB_EHCI_HCD */
 
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+
+static struct resource ohci_resources[] = {
+	{
+		.start	= OMAP34XX_OHCI_BASE,
+		.end	= OMAP34XX_OHCI_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_UHH_CONFIG_BASE,
+		.end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_USBTLL_BASE,
+		.end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{	/* general IRQ */
+		.start	= INT_34XX_OHCI_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device ohci_device = {
+	.name		= "ohci-omap3",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(ohci_resources),
+	.resource	= ohci_resources,
+};
+
+static void setup_ohci_io_mux(const enum ohci_omap3_port_mode *port_mode)
+{
+	switch (port_mode[0]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("mm1_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm1_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("mm1_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("mm1_txen_n", OMAP_PIN_OUTPUT);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("mm1_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm1_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case OMAP_OHCI_PORT_MODE_UNUSED:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+	switch (port_mode[1]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("mm2_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm2_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("mm2_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("mm2_txen_n", OMAP_PIN_OUTPUT);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("mm2_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm2_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case OMAP_OHCI_PORT_MODE_UNUSED:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+	switch (port_mode[2]) {
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
+		omap_mux_init_signal("mm3_rxdp",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm3_rxdm",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
+	case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
+		omap_mux_init_signal("mm3_rxrcv",
+			OMAP_PIN_INPUT_PULLDOWN);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
+		omap_mux_init_signal("mm3_txen_n", OMAP_PIN_OUTPUT);
+		/* FALLTHROUGH */
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
+	case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
+		omap_mux_init_signal("mm3_txse0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("mm3_txdat",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case OMAP_OHCI_PORT_MODE_UNUSED:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+}
+
+void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+{
+	platform_device_add_data(&ohci_device, pdata, sizeof(*pdata));
+
+	/* Setup Pin IO MUX for OHCI */
+	if (cpu_is_omap34xx())
+		setup_ohci_io_mux(pdata->port_mode);
+
+	if (platform_device_register(&ohci_device) < 0) {
+		pr_err("Unable to register FS-USB (OHCI) device\n");
+		return;
+	}
+}
+
+#else
+
+void __init usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata)
+{
+}
+
+#endif /* CONFIG_USB_OHCI_HCD */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-omap2/usb-musb.c linux-libre-2.6.35-gnu/arch/arm/mach-omap2/usb-musb.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-omap2/usb-musb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-omap2/usb-musb.c	2010-08-01 18:11:14.000000000 -0400
@@ -107,6 +107,7 @@
 	musb_plat.board_data = board_data;
 	musb_plat.power = board_data->power >> 1;
 	musb_plat.mode = board_data->mode;
+	musb_plat.extvbus = board_data->extvbus;
 
 	if (platform_device_register(&musb_device) < 0)
 		printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-orion5x/dns323-setup.c linux-libre-2.6.35-gnu/arch/arm/mach-orion5x/dns323-setup.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-orion5x/dns323-setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-orion5x/dns323-setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -240,22 +240,23 @@
 
 #define ORION_BLINK_HALF_PERIOD 100 /* ms */
 
-static int dns323_gpio_blink_set(unsigned gpio,
+static int dns323_gpio_blink_set(unsigned gpio, int state,
 	unsigned long *delay_on, unsigned long *delay_off)
 {
-	static int value = 0;
 
-	if (!*delay_on && !*delay_off)
+	if (delay_on && delay_off && !*delay_on && !*delay_off)
 		*delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
 
-	if (ORION_BLINK_HALF_PERIOD == *delay_on
-	    && ORION_BLINK_HALF_PERIOD == *delay_off) {
-		value = !value;
-		orion_gpio_set_blink(gpio, value);
-		return 0;
+	switch(state) {
+	case GPIO_LED_NO_BLINK_LOW:
+	case GPIO_LED_NO_BLINK_HIGH:
+		orion_gpio_set_blink(gpio, 0);
+		gpio_set_value(gpio, state);
+		break;
+	case GPIO_LED_BLINK:
+		orion_gpio_set_blink(gpio, 1);
 	}
-
-	return -EINVAL;
+	return 0;
 }
 
 static struct gpio_led dns323_leds[] = {
@@ -263,6 +264,7 @@
 		.name = "power:blue",
 		.gpio = DNS323_GPIO_LED_POWER2,
 		.default_trigger = "timer",
+		.active_low = 1,
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -439,6 +441,7 @@
 	 */
 	if (dns323_dev_id() == MV88F5181_DEV_ID) {
 		dns323_leds[0].active_low = 1;
+		gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
 		gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
 	}
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/cm-x300.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/cm-x300.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/cm-x300.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/cm-x300.c	2010-08-01 18:11:14.000000000 -0400
@@ -30,6 +30,9 @@
 #include <linux/i2c/pca953x.h>
 
 #include <linux/mfd/da903x.h>
+#include <linux/regulator/machine.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
@@ -430,7 +433,7 @@
 
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static struct pxamci_platform_data cm_x300_mci_platform_data = {
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
 	.gpio_card_detect	= GPIO82_MMC_IRQ,
 	.gpio_card_ro		= GPIO85_MMC_WP,
@@ -451,7 +454,7 @@
 }
 
 static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
 	.init 			= cm_x300_mci2_init,
 	.exit			= cm_x300_mci2_exit,
@@ -584,12 +587,87 @@
 static inline void cm_x300_init_rtc(void) {}
 #endif
 
+/* Battery */
+struct power_supply_info cm_x300_psy_info = {
+	.name = "battery",
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.voltage_max_design = 4200000,
+	.voltage_min_design = 3000000,
+	.use_for_apm = 1,
+};
+
+static void cm_x300_battery_low(void)
+{
+#if defined(CONFIG_APM_EMULATION)
+	apm_queue_event(APM_LOW_BATTERY);
+#endif
+}
+
+static void cm_x300_battery_critical(void)
+{
+#if defined(CONFIG_APM_EMULATION)
+	apm_queue_event(APM_CRITICAL_SUSPEND);
+#endif
+}
+
+struct da9030_battery_info cm_x300_battery_info = {
+	.battery_info = &cm_x300_psy_info,
+
+	.charge_milliamp = 1000,
+	.charge_millivolt = 4200,
+
+	.vbat_low = 3600,
+	.vbat_crit = 3400,
+	.vbat_charge_start = 4100,
+	.vbat_charge_stop = 4200,
+	.vbat_charge_restart = 4000,
+
+	.vcharge_min = 3200,
+	.vcharge_max = 5500,
+
+	.tbat_low = 197,
+	.tbat_high = 78,
+	.tbat_restart = 100,
+
+	.batmon_interval = 0,
+
+	.battery_low = cm_x300_battery_low,
+	.battery_critical = cm_x300_battery_critical,
+};
+
+static struct regulator_consumer_supply buck2_consumers[] = {
+	{
+		.dev = NULL,
+		.supply = "vcc_core",
+	},
+};
+
+static struct regulator_init_data buck2_data = {
+	.constraints = {
+		.min_uV = 1375000,
+		.max_uV = 1375000,
+		.state_mem = {
+			.enabled = 0,
+		},
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.apply_uV = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(buck2_consumers),
+	.consumer_supplies = buck2_consumers,
+};
+
 /* DA9030 */
 struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
 	{
-		.name = "da903x-backlight",
-		.id = DA9030_ID_WLED,
-	}
+		.name = "da903x-battery",
+		.id = DA9030_ID_BAT,
+		.platform_data = &cm_x300_battery_info,
+	},
+	{
+		.name = "da903x-regulator",
+		.id = DA9030_ID_BUCK2,
+		.platform_data = &buck2_data,
+	},
 };
 
 static struct da903x_platform_data cm_x300_da9030_info = {
@@ -599,7 +677,7 @@
 
 static struct i2c_board_info cm_x300_pmic_info = {
 	I2C_BOARD_INFO("da9030", 0x49),
-	.irq = IRQ_GPIO(0),
+	.irq = IRQ_WAKEUP0,
 	.platform_data = &cm_x300_da9030_info,
 };
 
@@ -689,13 +767,13 @@
 static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
 				 char **cmdline, struct meminfo *mi)
 {
-	mi->nr_banks = 2;
-	mi->bank[0].start = 0xa0000000;
-	mi->bank[0].node = 0;
-	mi->bank[0].size = (64*1024*1024);
-	mi->bank[1].start = 0xc0000000;
-	mi->bank[1].node = 0;
-	mi->bank[1].size = (64*1024*1024);
+	/* Make sure that mi->bank[0].start = PHYS_ADDR */
+	for (; tags->hdr.size; tags = tag_next(tags))
+		if (tags->hdr.tag == ATAG_MEM &&
+			tags->u.mem.start == 0x80000000) {
+			tags->u.mem.start = 0xa0000000;
+			break;
+		}
 }
 
 MACHINE_START(CM_X300, "CM-X300 module")
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/colibri-pxa300.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/colibri-pxa300.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/colibri-pxa300.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/colibri-pxa300.c	2010-08-01 18:11:14.000000000 -0400
@@ -26,6 +26,7 @@
 #include <mach/colibri.h>
 #include <mach/ohci.h>
 #include <mach/pxafb.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -145,7 +146,7 @@
 static inline void colibri_pxa300_init_lcd(void) {}
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
 static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
 	GPIO24_AC97_SYSCLK,
 	GPIO23_AC97_nACRESET,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/colibri-pxa3xx.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/colibri-pxa3xx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/colibri-pxa3xx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/colibri-pxa3xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -96,7 +96,7 @@
 }
 
 static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.init			= colibri_pxa3xx_mci_init,
 	.exit			= colibri_pxa3xx_mci_exit,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/corgi.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/corgi.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/corgi.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/corgi.c	2010-08-01 18:11:14.000000000 -0400
@@ -106,18 +106,18 @@
 	GPIO8_MMC_CS0,
 
 	/* GPIO Matrix Keypad */
-	GPIO66_GPIO,	/* column 0 */
-	GPIO67_GPIO,	/* column 1 */
-	GPIO68_GPIO,	/* column 2 */
-	GPIO69_GPIO,	/* column 3 */
-	GPIO70_GPIO,	/* column 4 */
-	GPIO71_GPIO,	/* column 5 */
-	GPIO72_GPIO,	/* column 6 */
-	GPIO73_GPIO,	/* column 7 */
-	GPIO74_GPIO,	/* column 8 */
-	GPIO75_GPIO,	/* column 9 */
-	GPIO76_GPIO,	/* column 10 */
-	GPIO77_GPIO,	/* column 11 */
+	GPIO66_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 0 */
+	GPIO67_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 1 */
+	GPIO68_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 2 */
+	GPIO69_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 3 */
+	GPIO70_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 4 */
+	GPIO71_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 5 */
+	GPIO72_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 6 */
+	GPIO73_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 7 */
+	GPIO74_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 8 */
+	GPIO75_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 9 */
+	GPIO76_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 10 */
+	GPIO77_GPIO | MFP_LPM_DRIVE_HIGH,	/* column 11 */
 	GPIO58_GPIO,	/* row 0 */
 	GPIO59_GPIO,	/* row 1 */
 	GPIO60_GPIO,	/* row 2 */
@@ -128,13 +128,20 @@
 	GPIO65_GPIO,	/* row 7 */
 
 	/* GPIO */
-	GPIO9_GPIO,	/* CORGI_GPIO_nSD_DETECT */
-	GPIO7_GPIO,	/* CORGI_GPIO_nSD_WP */
-	GPIO33_GPIO,	/* CORGI_GPIO_SD_PWR */
-	GPIO22_GPIO,	/* CORGI_GPIO_IR_ON */
-	GPIO44_GPIO,	/* CORGI_GPIO_HSYNC */
+	GPIO9_GPIO,				/* CORGI_GPIO_nSD_DETECT */
+	GPIO7_GPIO,				/* CORGI_GPIO_nSD_WP */
+	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
+	GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_LED_ORANGE */
+	GPIO21_GPIO,				/* CORGI_GPIO_ADC_TEMP */
+	GPIO22_GPIO,				/* CORGI_GPIO_IR_ON */
+	GPIO33_GPIO,				/* CORGI_GPIO_SD_PWR */
+	GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_ON */
+	GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT,	/* CORGI_GPIO_CHRG_UKN */
+	GPIO44_GPIO,				/* CORGI_GPIO_HSYNC */
 
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_KEY_INT */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* CORGI_GPIO_AC_IN */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* CORGI_GPIO_WAKEUP */
 };
 
 /*
@@ -437,8 +444,9 @@
  * to give the card a chance to fully insert/eject.
  */
 static struct pxamci_platform_data corgi_mci_platform_data = {
+	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= -1,
+	.gpio_card_detect	= CORGI_GPIO_nSD_DETECT,
 	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
 	.gpio_power		= CORGI_GPIO_SD_PWR,
 };
@@ -672,6 +680,15 @@
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
 
+	/* allow wakeup from various GPIOs */
+	gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
+	gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
+	gpio_set_wake(CORGI_GPIO_AC_IN, 1);
+	gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
+
+	if (!machine_is_corgi())
+		gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
+
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
@@ -679,7 +696,6 @@
 	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
-	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/corgi_lcd.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/corgi_lcd.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/corgi_lcd.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/corgi_lcd.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,288 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/corgi_lcd.c
- *
- * Corgi/Spitz LCD Specific Code
- *
- * Copyright (C) 2005 Richard Purdie
- *
- * Connectivity:
- *   Corgi - LCD to ATI Imageon w100 (Wallaby)
- *   Spitz - LCD to PXA Framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <mach/corgi.h>
-#include <mach/hardware.h>
-#include <mach/sharpsl.h>
-#include <mach/spitz.h>
-#include <asm/hardware/scoop.h>
-#include <asm/mach/sharpsl_param.h>
-#include "generic.h"
-
-/* Register Addresses */
-#define RESCTL_ADRS     0x00
-#define PHACTRL_ADRS    0x01
-#define DUTYCTRL_ADRS   0x02
-#define POWERREG0_ADRS  0x03
-#define POWERREG1_ADRS  0x04
-#define GPOR3_ADRS      0x05
-#define PICTRL_ADRS     0x06
-#define POLCTRL_ADRS    0x07
-
-/* Register Bit Definitions */
-#define RESCTL_QVGA     0x01
-#define RESCTL_VGA      0x00
-
-#define POWER1_VW_ON    0x01  /* VW Supply FET ON */
-#define POWER1_GVSS_ON  0x02  /* GVSS(-8V) Power Supply ON */
-#define POWER1_VDD_ON   0x04  /* VDD(8V),SVSS(-4V) Power Supply ON */
-
-#define POWER1_VW_OFF   0x00  /* VW Supply FET OFF */
-#define POWER1_GVSS_OFF 0x00  /* GVSS(-8V) Power Supply OFF */
-#define POWER1_VDD_OFF  0x00  /* VDD(8V),SVSS(-4V) Power Supply OFF */
-
-#define POWER0_COM_DCLK 0x01  /* COM Voltage DC Bias DAC Serial Data Clock */
-#define POWER0_COM_DOUT 0x02  /* COM Voltage DC Bias DAC Serial Data Out */
-#define POWER0_DAC_ON   0x04  /* DAC Power Supply ON */
-#define POWER0_COM_ON   0x08  /* COM Power Supply ON */
-#define POWER0_VCC5_ON  0x10  /* VCC5 Power Supply ON */
-
-#define POWER0_DAC_OFF  0x00  /* DAC Power Supply OFF */
-#define POWER0_COM_OFF  0x00  /* COM Power Supply OFF */
-#define POWER0_VCC5_OFF 0x00  /* VCC5 Power Supply OFF */
-
-#define PICTRL_INIT_STATE      0x01
-#define PICTRL_INIOFF          0x02
-#define PICTRL_POWER_DOWN      0x04
-#define PICTRL_COM_SIGNAL_OFF  0x08
-#define PICTRL_DAC_SIGNAL_OFF  0x10
-
-#define POLCTRL_SYNC_POL_FALL  0x01
-#define POLCTRL_EN_POL_FALL    0x02
-#define POLCTRL_DATA_POL_FALL  0x04
-#define POLCTRL_SYNC_ACT_H     0x08
-#define POLCTRL_EN_ACT_L       0x10
-
-#define POLCTRL_SYNC_POL_RISE  0x00
-#define POLCTRL_EN_POL_RISE    0x00
-#define POLCTRL_DATA_POL_RISE  0x00
-#define POLCTRL_SYNC_ACT_L     0x00
-#define POLCTRL_EN_ACT_H       0x00
-
-#define PHACTRL_PHASE_MANUAL   0x01
-#define DEFAULT_PHAD_QVGA     (9)
-#define DEFAULT_COMADJ        (125)
-
-/*
- * This is only a psuedo I2C interface. We can't use the standard kernel
- * routines as the interface is write only. We just assume the data is acked...
- */
-static void lcdtg_ssp_i2c_send(u8 data)
-{
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
-	udelay(10);
-}
-
-static void lcdtg_i2c_send_bit(u8 data)
-{
-	lcdtg_ssp_i2c_send(data);
-	lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(data);
-}
-
-static void lcdtg_i2c_send_start(u8 base)
-{
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(base);
-}
-
-static void lcdtg_i2c_send_stop(u8 base)
-{
-	lcdtg_ssp_i2c_send(base);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
-}
-
-static void lcdtg_i2c_send_byte(u8 base, u8 data)
-{
-	int i;
-	for (i = 0; i < 8; i++) {
-		if (data & 0x80)
-			lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
-		else
-			lcdtg_i2c_send_bit(base);
-		data <<= 1;
-	}
-}
-
-static void lcdtg_i2c_wait_ack(u8 base)
-{
-	lcdtg_i2c_send_bit(base);
-}
-
-static void lcdtg_set_common_voltage(u8 base_data, u8 data)
-{
-	/* Set Common Voltage to M62332FP via I2C */
-	lcdtg_i2c_send_start(base_data);
-	lcdtg_i2c_send_byte(base_data, 0x9c);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_byte(base_data, 0x00);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_byte(base_data, data);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_stop(base_data);
-}
-
-/* Set Phase Adjust */
-static void lcdtg_set_phadadj(int mode)
-{
-	int adj;
-	switch(mode) {
-		case 480:
-		case 640:
-			/* Setting for VGA */
-			adj = sharpsl_param.phadadj;
-			if (adj < 0) {
-				adj = PHACTRL_PHASE_MANUAL;
-			} else {
-				adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
-			}
-			break;
-		case 240:
-		case 320:
-		default:
-			/* Setting for QVGA */
-			adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
-			break;
-	}
-
-	corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
-}
-
-static int lcd_inited;
-
-void corgi_lcdtg_hw_init(int mode)
-{
-	if (!lcd_inited) {
-		int comadj;
-
-		/* Initialize Internal Logic & Port */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
-	  			| PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
-
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
-				| POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
-		/* VDD(+8V), SVSS(-4V) ON */
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
-		mdelay(3);
-
-		/* DAC ON */
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
-				| POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-		/* INIB = H, INI = L  */
-		/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
-
-		/* Set Common Voltage */
-		comadj = sharpsl_param.comadj;
-		if (comadj < 0)
-			comadj = DEFAULT_COMADJ;
-		lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
-
-		/* VCC5 ON, DAC ON */
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
-				POWER0_COM_OFF | POWER0_VCC5_ON);
-
-		/* GVSS(-8V) ON, VDD ON */
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
-		mdelay(2);
-
-		/* COM SIGNAL ON (PICTL[3] = L) */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
-
-		/* COM ON, DAC ON, VCC5_ON */
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
-				| POWER0_COM_ON | POWER0_VCC5_ON);
-
-		/* VW ON, GVSS ON, VDD ON */
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
-
-		/* Signals output enable */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
-
-		/* Set Phase Adjust */
-		lcdtg_set_phadadj(mode);
-
-		/* Initialize for Input Signals from ATI */
-		corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
-				| POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
-		udelay(1000);
-
-		lcd_inited=1;
-	} else {
-		lcdtg_set_phadadj(mode);
-	}
-
-	switch(mode) {
-		case 480:
-		case 640:
-			/* Set Lcd Resolution (VGA) */
-			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
-			break;
-		case 240:
-		case 320:
-		default:
-			/* Set Lcd Resolution (QVGA) */
-			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
-			break;
-	}
-}
-
-void corgi_lcdtg_suspend(void)
-{
-	/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
-	mdelay(34);
-
-	/* (1)VW OFF */
-	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
-
-	/* (2)COM OFF */
-	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
-
-	/* (3)Set Common Voltage Bias 0V */
-	lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
-
-	/* (4)GVSS OFF */
-	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
-
-	/* (5)VCC5 OFF */
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-	/* (6)Set PDWN, INIOFF, DACOFF */
-	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
-			PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
-
-	/* (7)DAC OFF */
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-	/* (8)VDD OFF */
-	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
-	lcd_inited = 0;
-}
-
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/corgi_pm.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/corgi_pm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/corgi_pm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/corgi_pm.c	2010-08-01 18:11:14.000000000 -0400
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
@@ -25,7 +26,8 @@
 #include <mach/sharpsl.h>
 #include <mach/corgi.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+
+#include "generic.h"
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
@@ -35,87 +37,46 @@
 #define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
 #define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
 
+static struct gpio charger_gpios[] = {
+	{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
+	{ CORGI_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
+	{ CORGI_GPIO_CHRG_UKN,	  GPIOF_OUT_INIT_LOW, "Charger Unknown" },
+	{ CORGI_GPIO_KEY_INT,	  GPIOF_IN, "Key Interrupt" },
+};
+
 static void corgi_charger_init(void)
 {
-	pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT);
-	pxa_gpio_mode(CORGI_GPIO_CHRG_ON | GPIO_OUT);
-	pxa_gpio_mode(CORGI_GPIO_CHRG_UKN | GPIO_OUT);
-	pxa_gpio_mode(CORGI_GPIO_KEY_INT | GPIO_IN);
+	gpio_request_array(ARRAY_AND_SIZE(charger_gpios));
 }
 
 static void corgi_measure_temp(int on)
 {
-	if (on)
-		GPSR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON);
-	else
-		GPCR(CORGI_GPIO_ADC_TEMP_ON) = GPIO_bit(CORGI_GPIO_ADC_TEMP_ON);
+	gpio_set_value(CORGI_GPIO_ADC_TEMP_ON, on);
 }
 
 static void corgi_charge(int on)
 {
 	if (on) {
 		if (machine_is_corgi() && (sharpsl_pm.flags & SHARPSL_SUSPENDED)) {
-			GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON);
-			GPSR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN);
+			gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
+			gpio_set_value(CORGI_GPIO_CHRG_UKN, 1);
 		} else {
-			GPSR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON);
-			GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN);
+			gpio_set_value(CORGI_GPIO_CHRG_ON, 1);
+			gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
 		}
 	} else {
-		GPCR(CORGI_GPIO_CHRG_ON) = GPIO_bit(CORGI_GPIO_CHRG_ON);
-		GPCR(CORGI_GPIO_CHRG_UKN) = GPIO_bit(CORGI_GPIO_CHRG_UKN);
+		gpio_set_value(CORGI_GPIO_CHRG_ON, 0);
+		gpio_set_value(CORGI_GPIO_CHRG_UKN, 0);
 	}
 }
 
 static void corgi_discharge(int on)
 {
-	if (on)
-		GPSR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON);
-	else
-		GPCR(CORGI_GPIO_DISCHARGE_ON) = GPIO_bit(CORGI_GPIO_DISCHARGE_ON);
+	gpio_set_value(CORGI_GPIO_DISCHARGE_ON, on);
 }
 
 static void corgi_presuspend(void)
 {
-	int i;
-	unsigned long wakeup_mask;
-
-	/* charging , so CHARGE_ON bit is HIGH during OFF. */
-	if (READ_GPIO_BIT(CORGI_GPIO_CHRG_ON))
-		PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_ON);
-	else
-		PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_ON);
-
-	if (READ_GPIO_BIT(CORGI_GPIO_LED_ORANGE))
-		PGSR0 |= GPIO_bit(CORGI_GPIO_LED_ORANGE);
-	else
-		PGSR0 &= ~GPIO_bit(CORGI_GPIO_LED_ORANGE);
-
-	if (READ_GPIO_BIT(CORGI_GPIO_CHRG_UKN))
-		PGSR1 |= GPIO_bit(CORGI_GPIO_CHRG_UKN);
-	else
-		PGSR1 &= ~GPIO_bit(CORGI_GPIO_CHRG_UKN);
-
-	/* Resume on keyboard power key */
-	PGSR2 = (PGSR2 & ~CORGI_GPIO_ALL_STROBE_BIT) | CORGI_GPIO_STROBE_BIT(0);
-
-	wakeup_mask = GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) | GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_CHRG_FULL);
-
-	if (!machine_is_corgi())
-		wakeup_mask |= GPIO_bit(CORGI_GPIO_MAIN_BAT_LOW);
-
-	PWER = wakeup_mask | PWER_RTC;
-	PRER = wakeup_mask;
-	PFER = wakeup_mask;
-
-	for (i = 0; i <=15; i++) {
-		if (PRER & PFER & GPIO_bit(i)) {
-			if (GPLR0 & GPIO_bit(i) )
-				PRER &= ~GPIO_bit(i);
-			else
-				PFER &= ~GPIO_bit(i);
-		}
-	}
 }
 
 static void corgi_postsuspend(void)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/corgi_ssp.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/corgi_ssp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/corgi_ssp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/corgi_ssp.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,274 +0,0 @@
-/*
- *  SSP control code for Sharp Corgi devices
- *
- *  Copyright (c) 2004-2005 Richard Purdie
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <mach/ssp.h>
-#include <mach/pxa2xx-gpio.h>
-#include <mach/regs-ssp.h>
-#include "sharpsl.h"
-
-static DEFINE_SPINLOCK(corgi_ssp_lock);
-static struct ssp_dev corgi_ssp_dev;
-static struct ssp_state corgi_ssp_state;
-static struct corgissp_machinfo *ssp_machinfo;
-
-/*
- * There are three devices connected to the SSP interface:
- *   1. A touchscreen controller (TI ADS7846 compatible)
- *   2. An LCD controller (with some Backlight functionality)
- *   3. A battery monitoring IC (Maxim MAX1111)
- *
- * Each device uses a different speed/mode of communication.
- *
- * The touchscreen is very sensitive and the most frequently used
- * so the port is left configured for this.
- *
- * Devices are selected using Chip Selects on GPIOs.
- */
-
-/*
- *  ADS7846 Routines
- */
-unsigned long corgi_ssp_ads7846_putget(ulong data)
-{
-	unsigned long flag;
-	u32 ret = 0;
-
-	spin_lock_irqsave(&corgi_ssp_lock, flag);
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-
-	ssp_write_word(&corgi_ssp_dev,data);
- 	ssp_read_word(&corgi_ssp_dev, &ret);
-
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
-	return ret;
-}
-
-/*
- * NOTE: These functions should always be called in interrupt context
- * and use the _lock and _unlock functions. They are very time sensitive.
- */
-void corgi_ssp_ads7846_lock(void)
-{
-	spin_lock(&corgi_ssp_lock);
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-}
-
-void corgi_ssp_ads7846_unlock(void)
-{
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-	spin_unlock(&corgi_ssp_lock);
-}
-
-void corgi_ssp_ads7846_put(ulong data)
-{
-	ssp_write_word(&corgi_ssp_dev,data);
-}
-
-unsigned long corgi_ssp_ads7846_get(void)
-{
-	u32 ret = 0;
-	ssp_read_word(&corgi_ssp_dev, &ret);
-	return ret;
-}
-
-EXPORT_SYMBOL(corgi_ssp_ads7846_putget);
-EXPORT_SYMBOL(corgi_ssp_ads7846_lock);
-EXPORT_SYMBOL(corgi_ssp_ads7846_unlock);
-EXPORT_SYMBOL(corgi_ssp_ads7846_put);
-EXPORT_SYMBOL(corgi_ssp_ads7846_get);
-
-
-/*
- *  LCD/Backlight Routines
- */
-unsigned long corgi_ssp_dac_put(ulong data)
-{
-	unsigned long flag, sscr1 = SSCR1_SPH;
-	u32 tmp;
-
-	spin_lock_irqsave(&corgi_ssp_lock, flag);
-
-	if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi())
-		sscr1 = 0;
-
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
-	ssp_enable(&corgi_ssp_dev);
-
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
-	ssp_write_word(&corgi_ssp_dev,data);
-	/* Read null data back from device to prevent SSP overflow */
-	ssp_read_word(&corgi_ssp_dev, &tmp);
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
-
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
-	ssp_enable(&corgi_ssp_dev);
-
-	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
-	return 0;
-}
-
-void corgi_ssp_lcdtg_send(u8 adrs, u8 data)
-{
-	corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f));
-}
-
-void corgi_ssp_blduty_set(int duty)
-{
-	corgi_ssp_lcdtg_send(0x02,duty);
-}
-
-EXPORT_SYMBOL(corgi_ssp_lcdtg_send);
-EXPORT_SYMBOL(corgi_ssp_blduty_set);
-
-/*
- *  Max1111 Routines
- */
-int corgi_ssp_max1111_get(ulong data)
-{
-	unsigned long flag;
-	long voltage = 0, voltage1 = 0, voltage2 = 0;
-
-	spin_lock_irqsave(&corgi_ssp_lock, flag);
-	if (ssp_machinfo->cs_max1111 >= 0)
-		GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
-	ssp_enable(&corgi_ssp_dev);
-
-	udelay(1);
-
-	/* TB1/RB1 */
-	ssp_write_word(&corgi_ssp_dev,data);
-	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */
-
-	/* TB12/RB2 */
-	ssp_write_word(&corgi_ssp_dev,0);
-	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1);
-
-	/* TB13/RB3*/
-	ssp_write_word(&corgi_ssp_dev,0);
-	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2);
-
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
-	ssp_enable(&corgi_ssp_dev);
-	if (ssp_machinfo->cs_max1111 >= 0)
-		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
-	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
-	if (voltage1 & 0xc0 || voltage2 & 0x3f)
-		voltage = -1;
-	else
-		voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03);
-
-	return voltage;
-}
-
-EXPORT_SYMBOL(corgi_ssp_max1111_get);
-
-/*
- *  Support Routines
- */
-
-void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
-{
-	ssp_machinfo = machinfo;
-}
-
-static int __devinit corgi_ssp_probe(struct platform_device *dev)
-{
-	int ret;
-
-	/* Chip Select - Disable All */
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		pxa_gpio_mode(ssp_machinfo->cs_lcdcon  | GPIO_OUT | GPIO_DFLT_HIGH);
-	if (ssp_machinfo->cs_max1111 >= 0)
-	        pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
-	if (ssp_machinfo->cs_ads7846 >= 0)
-        	pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
-
-	ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
-
-	if (ret)
-		printk(KERN_ERR "Unable to register SSP handler!\n");
-	else {
-		ssp_disable(&corgi_ssp_dev);
-		ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
-		ssp_enable(&corgi_ssp_dev);
-	}
-
-	return ret;
-}
-
-static int corgi_ssp_remove(struct platform_device *dev)
-{
-	ssp_exit(&corgi_ssp_dev);
-	return 0;
-}
-
-static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
-{
-	ssp_flush(&corgi_ssp_dev);
-	ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
-
-	return 0;
-}
-
-static int corgi_ssp_resume(struct platform_device *dev)
-{
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
-	if (ssp_machinfo->cs_max1111 >= 0)
-		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
-	ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
-	ssp_enable(&corgi_ssp_dev);
-
-	return 0;
-}
-
-static struct platform_driver corgissp_driver = {
-	.probe		= corgi_ssp_probe,
-	.remove		= corgi_ssp_remove,
-	.suspend	= corgi_ssp_suspend,
-	.resume		= corgi_ssp_resume,
-	.driver		= {
-		.name	= "corgi-ssp",
-	},
-};
-
-int __init corgi_ssp_init(void)
-{
-	return platform_driver_register(&corgissp_driver);
-}
-
-arch_initcall(corgi_ssp_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/cpufreq-pxa2xx.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/cpufreq-pxa2xx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/cpufreq-pxa2xx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/cpufreq-pxa2xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -256,13 +256,9 @@
 
 static u32 mdrefr_dri(unsigned int freq)
 {
-	u32 dri = 0;
+	u32 interval = freq * SDRAM_TREF / sdram_rows;
 
-	if (cpu_is_pxa25x())
-		dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
-	if (cpu_is_pxa27x())
-		dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
-	return dri;
+	return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
 }
 
 /* find a valid frequency point */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/csb726.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/csb726.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/csb726.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/csb726.c	2010-08-01 18:11:14.000000000 -0400
@@ -125,18 +125,9 @@
 	GPIO118_I2C_SDA,
 };
 
-static struct pxamci_platform_data csb726_mci_data;
-
-static int csb726_mci_init(struct device *dev,
-		irq_handler_t detect, void *data)
-{
-	csb726_mci_data.detect_delay = msecs_to_jiffies(500);
-	return 0;
-}
-
 static struct pxamci_platform_data csb726_mci = {
+	.detect_delay_ms	= 500,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init			= csb726_mci_init,
 	/* FIXME setpower */
 	.gpio_card_detect	= CSB726_GPIO_MMC_DETECT,
 	.gpio_card_ro		= CSB726_GPIO_MMC_RO,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/em-x270.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/em-x270.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/em-x270.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/em-x270.c	2010-08-01 18:11:14.000000000 -0400
@@ -626,6 +626,7 @@
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
+	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
 				  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
 				  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
@@ -643,7 +644,6 @@
 	if (machine_is_em_x270())
 		em_x270_mci_platform_data.get_ro = em_x270_mci_get_ro;
 
-	em_x270_mci_platform_data.detect_delay	= msecs_to_jiffies(250);
 	pxa_set_mci_info(&em_x270_mci_platform_data);
 }
 #else
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/generic.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/generic.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/generic.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/generic.c	2010-08-01 18:11:14.000000000 -0400
@@ -28,7 +28,6 @@
 
 #include <mach/reset.h>
 #include <mach/gpio.h>
-#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
@@ -128,33 +127,3 @@
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
 	get_clk_frequency_khz(1);
 }
-
-/*
- * Configure pins for GPIO or other functions
- */
-int pxa_gpio_mode(int gpio_mode)
-{
-	unsigned long flags;
-	int gpio = gpio_mode & GPIO_MD_MASK_NR;
-	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
-	int gafr;
-
-	if (gpio > pxa_last_gpio)
-		return -EINVAL;
-
-	local_irq_save(flags);
-	if (gpio_mode & GPIO_DFLT_LOW)
-		GPCR(gpio) = GPIO_bit(gpio);
-	else if (gpio_mode & GPIO_DFLT_HIGH)
-		GPSR(gpio) = GPIO_bit(gpio);
-	if (gpio_mode & GPIO_MD_MASK_DIR)
-		GPDR(gpio) |= GPIO_bit(gpio);
-	else
-		GPDR(gpio) &= ~GPIO_bit(gpio);
-	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
-	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
-	local_irq_restore(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(pxa_gpio_mode);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/icontrol.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/icontrol.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/icontrol.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/icontrol.c	2010-08-01 18:11:14.000000000 -0400
@@ -73,7 +73,6 @@
 
 static struct mcp251x_platform_data mcp251x_info = {
 	.oscillator_frequency = 16E6,
-	.model                = CAN_MCP251X_MCP2515,
 	.board_specific_setup = NULL,
 	.power_enable         = NULL,
 	.transceiver_enable   = NULL
@@ -81,7 +80,7 @@
 
 static struct spi_board_info mcp251x_board_info[] = {
 	{
-		.modalias        = "mcp251x",
+		.modalias        = "mcp2515",
 		.max_speed_hz    = 6500000,
 		.bus_num         = 3,
 		.chip_select     = 0,
@@ -90,7 +89,7 @@
 		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
 	},
 	{
-		.modalias        = "mcp251x",
+		.modalias        = "mcp2515",
 		.max_speed_hz    = 6500000,
 		.bus_num         = 3,
 		.chip_select     = 1,
@@ -99,7 +98,7 @@
 		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
 	},
 	{
-		.modalias        = "mcp251x",
+		.modalias        = "mcp2515",
 		.max_speed_hz    = 6500000,
 		.bus_num         = 4,
 		.chip_select     = 0,
@@ -108,7 +107,7 @@
 		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
 	},
 	{
-		.modalias        = "mcp251x",
+		.modalias        = "mcp2515",
 		.max_speed_hz    = 6500000,
 		.bus_num         = 4,
 		.chip_select     = 1,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/corgi.h linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/corgi.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/corgi.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/corgi.h	2010-08-01 18:11:14.000000000 -0400
@@ -113,7 +113,6 @@
  * Shared data structures
  */
 extern struct platform_device corgiscoop_device;
-extern struct platform_device corgissp_device;
 
 #endif /* __ASM_ARCH_CORGI_H  */
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -25,6 +25,8 @@
 #define MFP_DIR(x)		(((x) >> 23) & 0x1)
 
 #define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+#define MFP_LPM_KEEP_OUTPUT	(0x1 << 25)
+
 #define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
 #define WAKEUP_ON_EDGE_FALL	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
 #define WAKEUP_ON_EDGE_BOTH	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/mmc.h linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/mmc.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/mmc.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/mmc.h	2010-08-01 18:11:14.000000000 -0400
@@ -9,7 +9,7 @@
 
 struct pxamci_platform_data {
 	unsigned int ocr_mask;			/* available voltages */
-	unsigned long detect_delay;		/* delay in jiffies before detecting cards after interrupt */
+	unsigned long detect_delay_ms;		/* delay in millisecond before detecting cards after interrupt */
 	int (*init)(struct device *, irq_handler_t , void *);
 	int (*get_ro)(struct device *);
 	void (*setpower)(struct device *, unsigned int);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,375 +0,0 @@
-#ifndef __ASM_ARCH_PXA2XX_GPIO_H
-#define __ASM_ARCH_PXA2XX_GPIO_H
-
-#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
-
-#include <mach/gpio.h>
-
-/* GPIO alternate function assignments */
-
-#define GPIO1_RST		1	/* reset */
-#define GPIO6_MMCCLK		6	/* MMC Clock */
-#define GPIO7_48MHz		7	/* 48 MHz clock output */
-#define GPIO8_MMCCS0		8	/* MMC Chip Select 0 */
-#define GPIO9_MMCCS1		9	/* MMC Chip Select 1 */
-#define GPIO10_RTCCLK		10	/* real time clock (1 Hz) */
-#define GPIO11_3_6MHz		11	/* 3.6 MHz oscillator out */
-#define GPIO12_32KHz		12	/* 32 kHz out */
-#define GPIO12_CIF_DD_7		12	/* Camera data pin 7 */
-#define GPIO13_MBGNT		13	/* memory controller grant */
-#define GPIO14_MBREQ		14	/* alternate bus master request */
-#define GPIO15_nCS_1		15	/* chip select 1 */
-#define GPIO16_PWM0		16	/* PWM0 output */
-#define GPIO17_PWM1		17	/* PWM1 output */
-#define GPIO17_CIF_DD_6		17	/* Camera data pin 6 */
-#define GPIO18_RDY		18	/* Ext. Bus Ready */
-#define GPIO19_DREQ1		19	/* External DMA Request */
-#define GPIO20_DREQ0		20	/* External DMA Request */
-#define GPIO23_SCLK		23	/* SSP clock */
-#define GPIO23_CIF_MCLK		23	/* Camera Master Clock */
-#define GPIO24_SFRM		24	/* SSP Frame */
-#define GPIO24_CIF_FV		24	/* Camera frame start signal */
-#define GPIO25_STXD		25	/* SSP transmit */
-#define GPIO25_CIF_LV		25	/* Camera line start signal */
-#define GPIO26_SRXD		26	/* SSP receive */
-#define GPIO26_CIF_PCLK		26	/* Camera Pixel Clock */
-#define GPIO27_SEXTCLK		27	/* SSP ext_clk */
-#define GPIO27_CIF_DD_0		27	/* Camera data pin 0 */
-#define GPIO28_BITCLK		28	/* AC97/I2S bit_clk */
-#define GPIO29_SDATA_IN		29	/* AC97 Sdata_in0 / I2S Sdata_in */
-#define GPIO30_SDATA_OUT	30	/* AC97/I2S Sdata_out */
-#define GPIO31_SYNC		31	/* AC97/I2S sync */
-#define GPIO32_SDATA_IN1	32	/* AC97 Sdata_in1 */
-#define GPIO32_SYSCLK		32	/* I2S System Clock */
-#define GPIO32_MMCCLK		32	/* MMC Clock (PXA270) */
-#define GPIO33_nCS_5		33	/* chip select 5 */
-#define GPIO34_FFRXD		34	/* FFUART receive */
-#define GPIO34_MMCCS0		34	/* MMC Chip Select 0 */
-#define GPIO35_FFCTS		35	/* FFUART Clear to send */
-#define GPIO36_FFDCD		36	/* FFUART Data carrier detect */
-#define GPIO37_FFDSR		37	/* FFUART data set ready */
-#define GPIO38_FFRI		38	/* FFUART Ring Indicator */
-#define GPIO39_MMCCS1		39	/* MMC Chip Select 1 */
-#define GPIO39_FFTXD		39	/* FFUART transmit data */
-#define GPIO40_FFDTR		40	/* FFUART data terminal Ready */
-#define GPIO41_FFRTS		41	/* FFUART request to send */
-#define GPIO42_BTRXD		42	/* BTUART receive data */
-#define GPIO42_HWRXD		42	/* HWUART receive data */
-#define GPIO42_CIF_MCLK		42	/* Camera Master Clock */
-#define GPIO43_BTTXD		43	/* BTUART transmit data */
-#define GPIO43_HWTXD		43	/* HWUART transmit data */
-#define GPIO43_CIF_FV		43	/* Camera frame start signal */
-#define GPIO44_BTCTS		44	/* BTUART clear to send */
-#define GPIO44_HWCTS		44	/* HWUART clear to send */
-#define GPIO44_CIF_LV		44	/* Camera line start signal */
-#define GPIO45_BTRTS		45	/* BTUART request to send */
-#define GPIO45_HWRTS		45	/* HWUART request to send */
-#define GPIO45_AC97_SYSCLK	45	/* AC97 System Clock */
-#define GPIO45_CIF_PCLK		45	/* Camera Pixel Clock */
-#define GPIO46_ICPRXD		46	/* ICP receive data */
-#define GPIO46_STRXD		46	/* STD_UART receive data */
-#define GPIO47_ICPTXD		47	/* ICP transmit data */
-#define GPIO47_STTXD		47	/* STD_UART transmit data */
-#define GPIO47_CIF_DD_0		47	/* Camera data pin 0 */
-#define GPIO48_nPOE		48	/* Output Enable for Card Space */
-#define GPIO48_CIF_DD_5		48	/* Camera data pin 5 */
-#define GPIO49_nPWE		49	/* Write Enable for Card Space */
-#define GPIO50_nPIOR		50	/* I/O Read for Card Space */
-#define GPIO50_CIF_DD_3		50	/* Camera data pin 3 */
-#define GPIO51_nPIOW		51	/* I/O Write for Card Space */
-#define GPIO51_CIF_DD_2		51	/* Camera data pin 2 */
-#define GPIO52_nPCE_1		52	/* Card Enable for Card Space */
-#define GPIO52_CIF_DD_4		52	/* Camera data pin 4 */
-#define GPIO53_nPCE_2		53	/* Card Enable for Card Space */
-#define GPIO53_MMCCLK		53	/* MMC Clock */
-#define GPIO53_CIF_MCLK		53	/* Camera Master Clock */
-#define GPIO54_MMCCLK		54	/* MMC Clock */
-#define GPIO54_pSKTSEL		54	/* Socket Select for Card Space */
-#define GPIO54_nPCE_2		54	/* Card Enable for Card Space (PXA27x) */
-#define GPIO54_CIF_PCLK		54	/* Camera Pixel Clock */
-#define GPIO55_nPREG		55	/* Card Address bit 26 */
-#define GPIO55_CIF_DD_1		55	/* Camera data pin 1 */
-#define GPIO56_nPWAIT		56	/* Wait signal for Card Space */
-#define GPIO57_nIOIS16		57	/* Bus Width select for I/O Card Space */
-#define GPIO58_LDD_0		58	/* LCD data pin 0 */
-#define GPIO59_LDD_1		59	/* LCD data pin 1 */
-#define GPIO60_LDD_2		60	/* LCD data pin 2 */
-#define GPIO61_LDD_3		61	/* LCD data pin 3 */
-#define GPIO62_LDD_4		62	/* LCD data pin 4 */
-#define GPIO63_LDD_5		63	/* LCD data pin 5 */
-#define GPIO64_LDD_6		64	/* LCD data pin 6 */
-#define GPIO65_LDD_7		65	/* LCD data pin 7 */
-#define GPIO66_LDD_8		66	/* LCD data pin 8 */
-#define GPIO66_MBREQ		66	/* alternate bus master req */
-#define GPIO67_LDD_9		67	/* LCD data pin 9 */
-#define GPIO67_MMCCS0		67	/* MMC Chip Select 0 */
-#define GPIO68_LDD_10		68	/* LCD data pin 10 */
-#define GPIO68_MMCCS1		68	/* MMC Chip Select 1 */
-#define GPIO69_LDD_11		69	/* LCD data pin 11 */
-#define GPIO69_MMCCLK		69	/* MMC_CLK */
-#define GPIO70_LDD_12		70	/* LCD data pin 12 */
-#define GPIO70_RTCCLK		70	/* Real Time clock (1 Hz) */
-#define GPIO71_LDD_13		71	/* LCD data pin 13 */
-#define GPIO71_3_6MHz		71	/* 3.6 MHz Oscillator clock */
-#define GPIO72_LDD_14		72	/* LCD data pin 14 */
-#define GPIO72_32kHz		72	/* 32 kHz clock */
-#define GPIO73_LDD_15		73	/* LCD data pin 15 */
-#define GPIO73_MBGNT		73	/* Memory controller grant */
-#define GPIO74_LCD_FCLK		74	/* LCD Frame clock */
-#define GPIO75_LCD_LCLK		75	/* LCD line clock */
-#define GPIO76_LCD_PCLK		76	/* LCD Pixel clock */
-#define GPIO77_LCD_ACBIAS	77	/* LCD AC Bias */
-#define GPIO78_nCS_2		78	/* chip select 2 */
-#define GPIO79_nCS_3		79	/* chip select 3 */
-#define GPIO80_nCS_4		80	/* chip select 4 */
-#define GPIO81_NSCLK		81	/* NSSP clock */
-#define GPIO81_CIF_DD_0		81	/* Camera data pin 0 */
-#define GPIO82_NSFRM		82	/* NSSP Frame */
-#define GPIO82_CIF_DD_5		82	/* Camera data pin 5 */
-#define GPIO83_NSTXD		83	/* NSSP transmit */
-#define GPIO83_CIF_DD_4		83	/* Camera data pin 4 */
-#define GPIO84_NSRXD		84	/* NSSP receive */
-#define GPIO84_CIF_FV		84	/* Camera frame start signal */
-#define GPIO85_nPCE_1		85	/* Card Enable for Card Space (PXA27x) */
-#define GPIO85_CIF_LV		85	/* Camera line start signal */
-#define GPIO90_CIF_DD_4		90	/* Camera data pin 4 */
-#define GPIO91_CIF_DD_5		91	/* Camera data pin 5 */
-#define GPIO92_MMCDAT0		92	/* MMC DAT0 (PXA27x) */
-#define GPIO93_CIF_DD_6		93	/* Camera data pin 6 */
-#define GPIO94_CIF_DD_5		94	/* Camera data pin 5 */
-#define GPIO95_CIF_DD_4		95	/* Camera data pin 4 */
-#define GPIO96_FFRXD		96	/* FFUART recieve */
-#define GPIO98_FFRTS		98	/* FFUART request to send */
-#define GPIO98_CIF_DD_0		98	/* Camera data pin 0 */
-#define GPIO99_FFTXD		99	/* FFUART transmit data */
-#define GPIO100_FFCTS		100	/* FFUART Clear to send */
-#define GPIO102_nPCE_1		102	/* PCMCIA (PXA27x) */
-#define GPIO103_CIF_DD_3	103	/* Camera data pin 3 */
-#define GPIO104_CIF_DD_2	104	/* Camera data pin 2 */
-#define GPIO105_CIF_DD_1	105	/* Camera data pin 1 */
-#define GPIO106_CIF_DD_9	106	/* Camera data pin 9 */
-#define GPIO107_CIF_DD_8	107	/* Camera data pin 8 */
-#define GPIO108_CIF_DD_7	108	/* Camera data pin 7 */
-#define GPIO109_MMCDAT1		109	/* MMC DAT1 (PXA27x) */
-#define GPIO110_MMCDAT2		110	/* MMC DAT2 (PXA27x) */
-#define GPIO110_MMCCS0		110	/* MMC Chip Select 0 (PXA27x) */
-#define GPIO111_MMCDAT3		111	/* MMC DAT3 (PXA27x) */
-#define GPIO111_MMCCS1		111	/* MMC Chip Select 1 (PXA27x) */
-#define GPIO112_MMCCMD		112	/* MMC CMD (PXA27x) */
-#define GPIO113_I2S_SYSCLK	113	/* I2S System Clock (PXA27x) */
-#define GPIO113_AC97_RESET_N	113	/* AC97 NRESET on (PXA27x) */
-#define GPIO114_CIF_DD_1	114	/* Camera data pin 1 */
-#define GPIO115_CIF_DD_3	115	/* Camera data pin 3 */
-#define GPIO116_CIF_DD_2	116	/* Camera data pin 2 */
-
-/* GPIO alternate function mode & direction */
-
-#define GPIO_IN			0x000
-#define GPIO_OUT		0x080
-#define GPIO_ALT_FN_1_IN	0x100
-#define GPIO_ALT_FN_1_OUT	0x180
-#define GPIO_ALT_FN_2_IN	0x200
-#define GPIO_ALT_FN_2_OUT	0x280
-#define GPIO_ALT_FN_3_IN	0x300
-#define GPIO_ALT_FN_3_OUT	0x380
-#define GPIO_MD_MASK_NR		0x07f
-#define GPIO_MD_MASK_DIR	0x080
-#define GPIO_MD_MASK_FN		0x300
-#define GPIO_DFLT_LOW		0x400
-#define GPIO_DFLT_HIGH		0x800
-
-#define GPIO1_RTS_MD		( 1 | GPIO_ALT_FN_1_IN)
-#define GPIO6_MMCCLK_MD		( 6 | GPIO_ALT_FN_1_OUT)
-#define GPIO7_48MHz_MD		( 7 | GPIO_ALT_FN_1_OUT)
-#define GPIO8_MMCCS0_MD		( 8 | GPIO_ALT_FN_1_OUT)
-#define GPIO9_MMCCS1_MD		( 9 | GPIO_ALT_FN_1_OUT)
-#define GPIO10_RTCCLK_MD	(10 | GPIO_ALT_FN_1_OUT)
-#define GPIO11_3_6MHz_MD	(11 | GPIO_ALT_FN_1_OUT)
-#define GPIO12_32KHz_MD		(12 | GPIO_ALT_FN_1_OUT)
-#define GPIO12_CIF_DD_7_MD	(12 | GPIO_ALT_FN_2_IN)
-#define GPIO13_MBGNT_MD		(13 | GPIO_ALT_FN_2_OUT)
-#define GPIO14_MBREQ_MD		(14 | GPIO_ALT_FN_1_IN)
-#define GPIO15_nCS_1_MD		(15 | GPIO_ALT_FN_2_OUT)
-#define GPIO16_PWM0_MD		(16 | GPIO_ALT_FN_2_OUT)
-#define GPIO17_PWM1_MD		(17 | GPIO_ALT_FN_2_OUT)
-#define GPIO17_CIF_DD_6_MD	(17 | GPIO_ALT_FN_2_IN)
-#define GPIO18_RDY_MD		(18 | GPIO_ALT_FN_1_IN)
-#define GPIO19_DREQ1_MD		(19 | GPIO_ALT_FN_1_IN)
-#define GPIO20_DREQ0_MD		(20 | GPIO_ALT_FN_1_IN)
-#define GPIO23_CIF_MCLK_MD	(23 | GPIO_ALT_FN_1_OUT)
-#define GPIO23_SCLK_MD		(23 | GPIO_ALT_FN_2_OUT)
-#define GPIO24_CIF_FV_MD	(24 | GPIO_ALT_FN_1_OUT)
-#define GPIO24_SFRM_MD		(24 | GPIO_ALT_FN_2_OUT)
-#define GPIO25_CIF_LV_MD	(25 | GPIO_ALT_FN_1_OUT)
-#define GPIO25_STXD_MD		(25 | GPIO_ALT_FN_2_OUT)
-#define GPIO26_SRXD_MD		(26 | GPIO_ALT_FN_1_IN)
-#define GPIO26_CIF_PCLK_MD	(26 | GPIO_ALT_FN_2_IN)
-#define GPIO27_SEXTCLK_MD	(27 | GPIO_ALT_FN_1_IN)
-#define GPIO27_CIF_DD_0_MD	(27 | GPIO_ALT_FN_3_IN)
-#define GPIO28_BITCLK_AC97_MD	(28 | GPIO_ALT_FN_1_IN)
-#define GPIO28_BITCLK_IN_I2S_MD	(28 | GPIO_ALT_FN_2_IN)
-#define GPIO28_BITCLK_OUT_I2S_MD	(28 | GPIO_ALT_FN_1_OUT)
-#define GPIO29_SDATA_IN_AC97_MD	(29 | GPIO_ALT_FN_1_IN)
-#define GPIO29_SDATA_IN_I2S_MD	(29 | GPIO_ALT_FN_2_IN)
-#define GPIO30_SDATA_OUT_AC97_MD	(30 | GPIO_ALT_FN_2_OUT)
-#define GPIO30_SDATA_OUT_I2S_MD	(30 | GPIO_ALT_FN_1_OUT)
-#define GPIO31_SYNC_I2S_MD	(31 | GPIO_ALT_FN_1_OUT)
-#define GPIO31_SYNC_AC97_MD	(31 | GPIO_ALT_FN_2_OUT)
-#define GPIO32_SDATA_IN1_AC97_MD	(32 | GPIO_ALT_FN_1_IN)
-#define GPIO32_SYSCLK_I2S_MD	(32 | GPIO_ALT_FN_1_OUT)
-#define GPIO32_MMCCLK_MD	(32 | GPIO_ALT_FN_2_OUT)
-#define GPIO33_nCS_5_MD		(33 | GPIO_ALT_FN_2_OUT)
-#define GPIO34_FFRXD_MD		(34 | GPIO_ALT_FN_1_IN)
-#define GPIO34_MMCCS0_MD	(34 | GPIO_ALT_FN_2_OUT)
-#define GPIO35_FFCTS_MD		(35 | GPIO_ALT_FN_1_IN)
-#define GPIO35_KP_MKOUT6_MD	(35 | GPIO_ALT_FN_2_OUT)
-#define GPIO36_FFDCD_MD		(36 | GPIO_ALT_FN_1_IN)
-#define GPIO37_FFDSR_MD		(37 | GPIO_ALT_FN_1_IN)
-#define GPIO38_FFRI_MD		(38 | GPIO_ALT_FN_1_IN)
-#define GPIO39_MMCCS1_MD	(39 | GPIO_ALT_FN_1_OUT)
-#define GPIO39_FFTXD_MD		(39 | GPIO_ALT_FN_2_OUT)
-#define GPIO40_FFDTR_MD		(40 | GPIO_ALT_FN_2_OUT)
-#define GPIO41_FFRTS_MD		(41 | GPIO_ALT_FN_2_OUT)
-#define GPIO41_KP_MKOUT7_MD	(41 | GPIO_ALT_FN_1_OUT)
-#define GPIO42_BTRXD_MD		(42 | GPIO_ALT_FN_1_IN)
-#define GPIO42_HWRXD_MD		(42 | GPIO_ALT_FN_3_IN)
-#define GPIO42_CIF_MCLK_MD	(42 | GPIO_ALT_FN_3_OUT)
-#define GPIO43_BTTXD_MD		(43 | GPIO_ALT_FN_2_OUT)
-#define GPIO43_HWTXD_MD		(43 | GPIO_ALT_FN_3_OUT)
-#define GPIO43_CIF_FV_MD	(43 | GPIO_ALT_FN_3_OUT)
-#define GPIO44_BTCTS_MD		(44 | GPIO_ALT_FN_1_IN)
-#define GPIO44_HWCTS_MD		(44 | GPIO_ALT_FN_3_IN)
-#define GPIO44_CIF_LV_MD	(44 | GPIO_ALT_FN_3_OUT)
-#define GPIO45_CIF_PCLK_MD	(45 | GPIO_ALT_FN_3_IN)
-#define GPIO45_BTRTS_MD		(45 | GPIO_ALT_FN_2_OUT)
-#define GPIO45_HWRTS_MD		(45 | GPIO_ALT_FN_3_OUT)
-#define GPIO45_SYSCLK_AC97_MD	(45 | GPIO_ALT_FN_1_OUT)
-#define GPIO46_ICPRXD_MD	(46 | GPIO_ALT_FN_1_IN)
-#define GPIO46_STRXD_MD		(46 | GPIO_ALT_FN_2_IN)
-#define GPIO47_CIF_DD_0_MD	(47 | GPIO_ALT_FN_1_IN)
-#define GPIO47_ICPTXD_MD	(47 | GPIO_ALT_FN_2_OUT)
-#define GPIO47_STTXD_MD		(47 | GPIO_ALT_FN_1_OUT)
-#define GPIO48_CIF_DD_5_MD	(48 | GPIO_ALT_FN_1_IN)
-#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
-#define GPIO48_HWTXD_MD		(48 | GPIO_ALT_FN_1_OUT)
-#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
-#define GPIO49_HWRXD_MD		(49 | GPIO_ALT_FN_1_IN)
-#define GPIO49_nPWE_MD		(49 | GPIO_ALT_FN_2_OUT)
-#define GPIO50_CIF_DD_3_MD	(50 | GPIO_ALT_FN_1_IN)
-#define GPIO50_nPIOR_MD		(50 | GPIO_ALT_FN_2_OUT)
-#define GPIO50_HWCTS_MD		(50 | GPIO_ALT_FN_1_IN)
-#define GPIO50_CIF_DD_3_MD	(50 | GPIO_ALT_FN_1_IN)
-#define GPIO51_CIF_DD_2_MD	(51 | GPIO_ALT_FN_1_IN)
-#define GPIO51_nPIOW_MD		(51 | GPIO_ALT_FN_2_OUT)
-#define GPIO51_HWRTS_MD		(51 | GPIO_ALT_FN_1_OUT)
-#define GPIO51_CIF_DD_2_MD	(51 | GPIO_ALT_FN_1_IN)
-#define GPIO52_nPCE_1_MD	(52 | GPIO_ALT_FN_2_OUT)
-#define GPIO52_CIF_DD_4_MD	(52 | GPIO_ALT_FN_1_IN)
-#define GPIO53_nPCE_2_MD	(53 | GPIO_ALT_FN_2_OUT)
-#define GPIO53_MMCCLK_MD	(53 | GPIO_ALT_FN_1_OUT)
-#define GPIO53_CIF_MCLK_MD	(53 | GPIO_ALT_FN_2_OUT)
-#define GPIO54_MMCCLK_MD	(54 | GPIO_ALT_FN_1_OUT)
-#define GPIO54_nPCE_2_MD	(54 | GPIO_ALT_FN_2_OUT)
-#define GPIO54_pSKTSEL_MD	(54 | GPIO_ALT_FN_2_OUT)
-#define GPIO54_CIF_PCLK_MD	(54 | GPIO_ALT_FN_3_IN)
-#define GPIO55_nPREG_MD		(55 | GPIO_ALT_FN_2_OUT)
-#define GPIO55_CIF_DD_1_MD	(55 | GPIO_ALT_FN_1_IN)
-#define GPIO56_nPWAIT_MD	(56 | GPIO_ALT_FN_1_IN)
-#define GPIO57_nIOIS16_MD	(57 | GPIO_ALT_FN_1_IN)
-#define GPIO58_LDD_0_MD		(58 | GPIO_ALT_FN_2_OUT)
-#define GPIO59_LDD_1_MD		(59 | GPIO_ALT_FN_2_OUT)
-#define GPIO60_LDD_2_MD		(60 | GPIO_ALT_FN_2_OUT)
-#define GPIO61_LDD_3_MD		(61 | GPIO_ALT_FN_2_OUT)
-#define GPIO62_LDD_4_MD		(62 | GPIO_ALT_FN_2_OUT)
-#define GPIO63_LDD_5_MD		(63 | GPIO_ALT_FN_2_OUT)
-#define GPIO64_LDD_6_MD		(64 | GPIO_ALT_FN_2_OUT)
-#define GPIO65_LDD_7_MD		(65 | GPIO_ALT_FN_2_OUT)
-#define GPIO66_LDD_8_MD		(66 | GPIO_ALT_FN_2_OUT)
-#define GPIO66_MBREQ_MD		(66 | GPIO_ALT_FN_1_IN)
-#define GPIO67_LDD_9_MD		(67 | GPIO_ALT_FN_2_OUT)
-#define GPIO67_MMCCS0_MD	(67 | GPIO_ALT_FN_1_OUT)
-#define GPIO68_LDD_10_MD	(68 | GPIO_ALT_FN_2_OUT)
-#define GPIO68_MMCCS1_MD	(68 | GPIO_ALT_FN_1_OUT)
-#define GPIO69_LDD_11_MD	(69 | GPIO_ALT_FN_2_OUT)
-#define GPIO69_MMCCLK_MD	(69 | GPIO_ALT_FN_1_OUT)
-#define GPIO70_LDD_12_MD	(70 | GPIO_ALT_FN_2_OUT)
-#define GPIO70_RTCCLK_MD	(70 | GPIO_ALT_FN_1_OUT)
-#define GPIO71_LDD_13_MD	(71 | GPIO_ALT_FN_2_OUT)
-#define GPIO71_3_6MHz_MD	(71 | GPIO_ALT_FN_1_OUT)
-#define GPIO72_LDD_14_MD	(72 | GPIO_ALT_FN_2_OUT)
-#define GPIO72_32kHz_MD		(72 | GPIO_ALT_FN_1_OUT)
-#define GPIO73_LDD_15_MD	(73 | GPIO_ALT_FN_2_OUT)
-#define GPIO73_MBGNT_MD		(73 | GPIO_ALT_FN_1_OUT)
-#define GPIO74_LCD_FCLK_MD	(74 | GPIO_ALT_FN_2_OUT)
-#define GPIO75_LCD_LCLK_MD	(75 | GPIO_ALT_FN_2_OUT)
-#define GPIO76_LCD_PCLK_MD	(76 | GPIO_ALT_FN_2_OUT)
-#define GPIO77_LCD_ACBIAS_MD	(77 | GPIO_ALT_FN_2_OUT)
-#define GPIO78_nCS_2_MD		(78 | GPIO_ALT_FN_2_OUT)
-#define GPIO78_nPCE_2_MD	(78 | GPIO_ALT_FN_1_OUT)
-#define GPIO79_nCS_3_MD		(79 | GPIO_ALT_FN_2_OUT)
-#define GPIO79_pSKTSEL_MD	(79 | GPIO_ALT_FN_1_OUT)
-#define GPIO80_nCS_4_MD		(80 | GPIO_ALT_FN_2_OUT)
-#define GPIO81_NSSP_CLK_OUT	(81 | GPIO_ALT_FN_1_OUT)
-#define GPIO81_NSSP_CLK_IN	(81 | GPIO_ALT_FN_1_IN)
-#define GPIO81_CIF_DD_0_MD	(81 | GPIO_ALT_FN_2_IN)
-#define GPIO82_NSSP_FRM_OUT	(82 | GPIO_ALT_FN_1_OUT)
-#define GPIO82_NSSP_FRM_IN	(82 | GPIO_ALT_FN_1_IN)
-#define GPIO82_CIF_DD_5_MD	(82 | GPIO_ALT_FN_3_IN)
-#define GPIO83_NSSP_TX		(83 | GPIO_ALT_FN_1_OUT)
-#define GPIO83_NSSP_RX		(83 | GPIO_ALT_FN_2_IN)
-#define GPIO83_CIF_DD_4_MD	(83 | GPIO_ALT_FN_3_IN)
-#define GPIO84_NSSP_TX		(84 | GPIO_ALT_FN_1_OUT)
-#define GPIO84_NSSP_RX		(84 | GPIO_ALT_FN_2_IN)
-#define GPIO84_CIF_FV_MD	(84 | GPIO_ALT_FN_3_IN)
-#define GPIO85_nPCE_1_MD	(85 | GPIO_ALT_FN_1_OUT)
-#define GPIO85_CIF_LV_MD	(85 | GPIO_ALT_FN_3_IN)
-#define GPIO86_nPCE_1_MD	(86 | GPIO_ALT_FN_1_OUT)
-#define GPIO88_USBH1_PWR_MD	(88 | GPIO_ALT_FN_1_IN)
-#define GPIO89_USBH1_PEN_MD	(89 | GPIO_ALT_FN_2_OUT)
-#define GPIO90_CIF_DD_4_MD	(90 | GPIO_ALT_FN_3_IN)
-#define GPIO91_CIF_DD_5_MD	(91 | GPIO_ALT_FN_3_IN)
-#define GPIO92_MMCDAT0_MD	(92 | GPIO_ALT_FN_1_OUT)
-#define GPIO93_CIF_DD_6_MD	(93 | GPIO_ALT_FN_2_IN)
-#define GPIO94_CIF_DD_5_MD	(94 | GPIO_ALT_FN_2_IN)
-#define GPIO95_CIF_DD_4_MD	(95 | GPIO_ALT_FN_2_IN)
-#define GPIO95_KP_MKIN6_MD	(95 | GPIO_ALT_FN_3_IN)
-#define GPIO96_KP_DKIN3_MD	(96 | GPIO_ALT_FN_1_IN)
-#define GPIO96_FFRXD_MD		(96 | GPIO_ALT_FN_3_IN)
-#define GPIO97_KP_MKIN3_MD	(97 | GPIO_ALT_FN_3_IN)
-#define GPIO98_CIF_DD_0_MD	(98 | GPIO_ALT_FN_2_IN)
-#define GPIO98_FFRTS_MD		(98 | GPIO_ALT_FN_3_OUT)
-#define GPIO99_FFTXD_MD		(99 | GPIO_ALT_FN_3_OUT)
-#define GPIO100_KP_MKIN0_MD	(100 | GPIO_ALT_FN_1_IN)
-#define GPIO101_KP_MKIN1_MD	(101 | GPIO_ALT_FN_1_IN)
-#define GPIO102_nPCE_1_MD	(102 | GPIO_ALT_FN_1_OUT)
-#define GPIO102_KP_MKIN2_MD	(102 | GPIO_ALT_FN_1_IN)
-#define GPIO103_CIF_DD_3_MD	(103 | GPIO_ALT_FN_1_IN)
-#define GPIO103_KP_MKOUT0_MD	(103 | GPIO_ALT_FN_2_OUT)
-#define GPIO104_CIF_DD_2_MD	(104 | GPIO_ALT_FN_1_IN)
-#define GPIO104_pSKTSEL_MD	(104 | GPIO_ALT_FN_1_OUT)
-#define GPIO104_KP_MKOUT1_MD	(104 | GPIO_ALT_FN_2_OUT)
-#define GPIO105_CIF_DD_1_MD	(105 | GPIO_ALT_FN_1_IN)
-#define GPIO105_KP_MKOUT2_MD	(105 | GPIO_ALT_FN_2_OUT)
-#define GPIO106_CIF_DD_9_MD	(106 | GPIO_ALT_FN_1_IN)
-#define GPIO106_KP_MKOUT3_MD	(106 | GPIO_ALT_FN_2_OUT)
-#define GPIO107_CIF_DD_8_MD	(107 | GPIO_ALT_FN_1_IN)
-#define GPIO107_KP_MKOUT4_MD	(107 | GPIO_ALT_FN_2_OUT)
-#define GPIO108_CIF_DD_7_MD	(108 | GPIO_ALT_FN_1_IN)
-#define GPIO108_KP_MKOUT5_MD	(108 | GPIO_ALT_FN_2_OUT)
-#define GPIO109_MMCDAT1_MD	(109 | GPIO_ALT_FN_1_OUT)
-#define GPIO110_MMCDAT2_MD	(110 | GPIO_ALT_FN_1_OUT)
-#define GPIO110_MMCCS0_MD	(110 | GPIO_ALT_FN_1_OUT)
-#define GPIO111_MMCDAT3_MD	(111 | GPIO_ALT_FN_1_OUT)
-#define GPIO110_MMCCS1_MD	(111 | GPIO_ALT_FN_1_OUT)
-#define GPIO112_MMCCMD_MD	(112 | GPIO_ALT_FN_1_OUT)
-#define GPIO113_I2S_SYSCLK_MD	(113 | GPIO_ALT_FN_1_OUT)
-#define GPIO113_AC97_RESET_N_MD	(113 | GPIO_ALT_FN_2_OUT)
-#define GPIO117_I2CSCL_MD	(117 | GPIO_ALT_FN_1_IN)
-#define GPIO118_I2CSDA_MD	(118 | GPIO_ALT_FN_1_IN)
-
-/*
- * Handy routine to set GPIO alternate functions
- */
-extern int pxa_gpio_mode( int gpio_mode );
-
-#endif /* __ASM_ARCH_PXA2XX_GPIO_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/regs-ssp.h linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/regs-ssp.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/regs-ssp.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/regs-ssp.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,134 +0,0 @@
-#ifndef __ASM_ARCH_REGS_SSP_H
-#define __ASM_ARCH_REGS_SSP_H
-
-/*
- * SSP Serial Port Registers
- * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
- * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
- */
-
-#define SSCR0		(0x00)  /* SSP Control Register 0 */
-#define SSCR1		(0x04)  /* SSP Control Register 1 */
-#define SSSR		(0x08)  /* SSP Status Register */
-#define SSITR		(0x0C)  /* SSP Interrupt Test Register */
-#define SSDR		(0x10)  /* SSP Data Write/Data Read Register */
-
-#define SSTO		(0x28)  /* SSP Time Out Register */
-#define SSPSP		(0x2C)  /* SSP Programmable Serial Protocol */
-#define SSTSA		(0x30)  /* SSP Tx Timeslot Active */
-#define SSRSA		(0x34)  /* SSP Rx Timeslot Active */
-#define SSTSS		(0x38)  /* SSP Timeslot Status */
-#define SSACD		(0x3C)  /* SSP Audio Clock Divider */
-
-#if defined(CONFIG_PXA3xx)
-#define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */
-#endif
-
-/* Common PXA2xx bits first */
-#define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
-#define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
-#define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
-#define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
-#define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
-#define SSCR0_National	(0x2 << 4)	/* National Microwire */
-#define SSCR0_ECS	(1 << 6)	/* External clock select */
-#define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
-
-#if defined(CONFIG_PXA25x)
-#define SSCR0_SCR	(0x0000ff00)	/* Serial Clock Rate (mask) */
-#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
-#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
-#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
-#endif
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
-#define SSCR0_NCS	(1 << 21)	/* Network clock select */
-#define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
-#define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
-#define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
-#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
-#define SSCR0_ACS	(1 << 30)	/* Audio clock select */
-#define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
-#endif
-
-#if defined(CONFIG_PXA3xx)
-#define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
-#endif
-
-#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
-#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
-#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
-#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
-#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
-#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
-#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
-#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
-
-#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
-#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
-#define SSSR_BSY	(1 << 4)	/* SSP Busy */
-#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
-#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
-#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
-
-#define SSCR0_TIM		(1 << 23)	/* Transmit FIFO Under Run Interrupt Mask */
-#define SSCR0_RIM		(1 << 22)	/* Receive FIFO Over Run interrupt Mask */
-#define SSCR0_NCS		(1 << 21)	/* Network Clock Select */
-#define SSCR0_EDSS		(1 << 20)	/* Extended Data Size Select */
-
-/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
-#define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
-#define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
-#define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
-#define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
-#define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
-#define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
-#define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
-#define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
-#define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
-#define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
-#define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
-#define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
-#define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
-#define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
-#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interupt Enable */
-#define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
-#define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
-#define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
-
-#define SSSR_BCE		(1 << 23)	/* Bit Count Error */
-#define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
-#define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
-#define SSSR_EOC		(1 << 20)	/* End Of Chain */
-#define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
-#define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
-
-#if defined(CONFIG_PXA3xx)
-#define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
-#define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
-#endif
-
-#define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
-#define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
-#define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
-#define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
-#define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
-#define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
-#define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
-#define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
-#define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
-
-#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
-#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
-#define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
-#if defined(CONFIG_PXA3xx)
-#define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
-#endif
-
-
-#endif /* __ASM_ARCH_REGS_SSP_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/ssp.h linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/ssp.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/ssp.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/ssp.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,109 +0,0 @@
-/*
- *  ssp.h
- *
- *  Copyright (C) 2003 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver supports the following PXA CPU/SSP ports:-
- *
- *       PXA250     SSP
- *       PXA255     SSP, NSSP
- *       PXA26x     SSP, NSSP, ASSP
- *       PXA27x     SSP1, SSP2, SSP3
- *       PXA3xx     SSP1, SSP2, SSP3, SSP4
- */
-
-#ifndef __ASM_ARCH_SSP_H
-#define __ASM_ARCH_SSP_H
-
-#include <linux/list.h>
-#include <linux/io.h>
-
-enum pxa_ssp_type {
-	SSP_UNDEFINED = 0,
-	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
-	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
-	PXA27x_SSP,
-};
-
-struct ssp_device {
-	struct platform_device *pdev;
-	struct list_head	node;
-
-	struct clk	*clk;
-	void __iomem	*mmio_base;
-	unsigned long	phys_base;
-
-	const char	*label;
-	int		port_id;
-	int		type;
-	int		use_count;
-	int		irq;
-	int		drcmr_rx;
-	int		drcmr_tx;
-};
-
-#ifdef CONFIG_PXA_SSP_LEGACY
-/*
- * SSP initialisation flags
- */
-#define SSP_NO_IRQ	0x1		/* don't register an irq handler in SSP driver */
-
-struct ssp_state {
-	u32	cr0;
-	u32 cr1;
-	u32 to;
-	u32 psp;
-};
-
-struct ssp_dev {
-	struct ssp_device *ssp;
-	u32 port;
-	u32 mode;
-	u32 flags;
-	u32 psp_flags;
-	u32 speed;
-	int irq;
-};
-
-int ssp_write_word(struct ssp_dev *dev, u32 data);
-int ssp_read_word(struct ssp_dev *dev, u32 *data);
-int ssp_flush(struct ssp_dev *dev);
-void ssp_enable(struct ssp_dev *dev);
-void ssp_disable(struct ssp_dev *dev);
-void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp);
-void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp);
-int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
-int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
-void ssp_exit(struct ssp_dev *dev);
-#endif /* CONFIG_PXA_SSP_LEGACY */
-
-/**
- * ssp_write_reg - Write to a SSP register
- *
- * @dev: SSP device to access
- * @reg: Register to write to
- * @val: Value to be written.
- */
-static inline void ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
-{
-	__raw_writel(val, dev->mmio_base + reg);
-}
-
-/**
- * ssp_read_reg - Read from a SSP register
- *
- * @dev: SSP device to access
- * @reg: Register to read from
- */
-static inline u32 ssp_read_reg(struct ssp_device *dev, u32 reg)
-{
-	return __raw_readl(dev->mmio_base + reg);
-}
-
-struct ssp_device *ssp_request(int port, const char *label);
-void ssp_free(struct ssp_device *);
-#endif /* __ASM_ARCH_SSP_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/tosa.h linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/tosa.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/tosa.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/tosa.h	2010-08-01 18:11:14.000000000 -0400
@@ -167,7 +167,7 @@
 
 #define TOSA_KEY_SYNC		KEY_102ND /* ??? */
 
-#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES
+#ifndef CONFIG_TOSA_USE_EXT_KEYCODES
 #define TOSA_KEY_RECORD		KEY_YEN
 #define TOSA_KEY_ADDRESSBOOK	KEY_KATAKANA
 #define TOSA_KEY_CANCEL		KEY_ESC
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/vpac270.h linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/vpac270.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/vpac270.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/vpac270.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,42 @@
+/*
+ * GPIOs and interrupts for Voipac PXA270
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_VPAC270_H_
+#define _INCLUDE_VPAC270_H_
+
+#define	GPIO1_VPAC270_USER_BTN		1
+
+#define	GPIO15_VPAC270_LED_ORANGE	15
+
+#define	GPIO81_VPAC270_BKL_ON		81
+#define	GPIO83_VPAC270_NL_ON		83
+
+#define	GPIO52_VPAC270_SD_READONLY	52
+#define	GPIO53_VPAC270_SD_DETECT_N	53
+
+#define	GPIO84_VPAC270_PCMCIA_CD	84
+#define	GPIO35_VPAC270_PCMCIA_RDY	35
+#define	GPIO107_VPAC270_PCMCIA_PPEN	107
+#define	GPIO11_VPAC270_PCMCIA_RESET	11
+#define	GPIO17_VPAC270_CF_CD		17
+#define	GPIO12_VPAC270_CF_RDY		12
+#define	GPIO16_VPAC270_CF_RESET		16
+
+#define	GPIO41_VPAC270_UDC_DETECT	41
+
+#define	GPIO114_VPAC270_ETH_IRQ		114
+
+#define	GPIO36_VPAC270_IDE_IRQ		36
+
+#define	GPIO113_VPAC270_TS_IRQ		113
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/z2.h linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/z2.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/include/mach/z2.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/include/mach/z2.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,41 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/z2.h
+ *
+ *  Author: Ken McGuire
+ *  Created: Feb 6, 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_ZIPIT2_H
+#define ASM_ARCH_ZIPIT2_H
+
+/* LEDs */
+#define	GPIO10_ZIPITZ2_LED_WIFI		10
+#define	GPIO85_ZIPITZ2_LED_CHARGED	85
+#define	GPIO83_ZIPITZ2_LED_CHARGING	83
+
+/* SD/MMC */
+#define	GPIO96_ZIPITZ2_SD_DETECT	96
+
+/* GPIO Buttons */
+#define	GPIO1_ZIPITZ2_POWER_BUTTON	1
+#define	GPIO98_ZIPITZ2_LID_BUTTON	98
+
+/* Libertas GSPI8686 WiFi */
+#define	GPIO14_ZIPITZ2_WIFI_RESET	14
+#define	GPIO15_ZIPITZ2_WIFI_POWER	15
+#define	GPIO24_ZIPITZ2_WIFI_CS		24
+#define	GPIO36_ZIPITZ2_WIFI_IRQ		36
+
+/* LCD */
+#define	GPIO19_ZIPITZ2_LCD_RESET	19
+#define	GPIO88_ZIPITZ2_LCD_CS		88
+
+/* MISC GPIOs */
+#define	GPIO0_ZIPITZ2_AC_DETECT		0
+#define GPIO37_ZIPITZ2_HEADSET_DETECT	37
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-pxa/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -19,7 +19,6 @@
 config MACH_ZYLONITE
 	bool
 	select PXA3xx
-	select PXA_SSP
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
@@ -39,7 +38,6 @@
 	select PXA3xx
 	select CPU_PXA300
 	select CPU_PXA310
-	select PXA_SSP
 
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
@@ -98,7 +96,6 @@
 	select PXA27x
 	select IWMMXT
 	select PXA25x
-	select PXA_SSP
 
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
@@ -161,7 +158,6 @@
 	select MTD_CFI
 	select MTD_CHAR
 	select SMC91X
-	select PXA_SSP
 	help
 	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
 	  Tuned for usage in Libera instruments for particle accelerators.
@@ -180,7 +176,6 @@
 	depends on TRIZEPS_PXA
 	select TRIZEPS_PCMCIA
 	select PXA27x
-	select PXA_SSP
 
 choice
 	prompt "Select base board for Trizeps module"
@@ -217,7 +212,6 @@
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
-	select PXA_SSP
 	select PXA_HAVE_BOARD_IRQS
 
 config MACH_PCM990_BASEBOARD
@@ -255,13 +249,19 @@
 	select PXA3xx
 	select CPU_PXA320
 
+config MACH_VPAC270
+	bool "Voipac PXA270"
+	select PXA27x
+	select HAVE_PATA_PLATFORM
+	help
+	  PXA270 based Single Board Computer.
+
 comment "End-user Products (sorted by vendor name)"
 
 config MACH_H4700
 	bool "HP iPAQ hx4700"
 	select PXA27x
 	select IWMMXT
-	select PXA_SSP
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
@@ -277,7 +277,6 @@
 	bool "Enable HTC Magician Support"
 	select PXA27x
 	select IWMMXT
-	select PXA_SSP
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
@@ -431,13 +430,11 @@
 	bool "Raumfeld Connector"
 	select PXA3xx
 	select CPU_PXA300
-	select PXA_SSP
 
 config MACH_RAUMFELD_SPEAKER
 	bool "Raumfeld Speaker"
 	select PXA3xx
 	select CPU_PXA300
-	select PXA_SSP
 
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
@@ -461,21 +458,11 @@
 	select HWMON
 	select SENSORS_MAX1111
 
-config CORGI_SSP_DEPRECATED
-	bool
-	select PXA_SSP
-	select PXA_SSP_LEGACY
-	help
-	  This option will include corgi_ssp.c and corgi_lcd.c
-	  that corgi_ts.c and other legacy drivers (corgi_bl.c
-	  and sharpsl_pm.c) may depend on.
-
 config MACH_POODLE
 	bool "Enable Sharp SL-5600 (Poodle) Support"
 	depends on PXA_SHARPSL
 	select PXA25x
 	select SHARP_LOCOMO
-	select PXA_SSP
 	select PXA_HAVE_BOARD_IRQS
 
 config MACH_CORGI
@@ -581,6 +568,12 @@
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
 
+config MACH_ZIPIT2
+	bool "Zipit Z2 Handheld"
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
 endmenu
 
 config PXA25x
@@ -645,28 +638,16 @@
 
 config PXA_SHARP_C7xx
 	bool
-	select PXA_SSP
 	select SHARPSL_PM
 	help
 	  Enable support for all Sharp C7xx models
 
 config PXA_SHARP_Cxx00
 	bool
-	select PXA_SSP
 	select SHARPSL_PM
 	help
 	  Enable common support for Sharp Cxx00 models
 
-config PXA_SSP
-	tristate
-	help
-	  Enable support for PXA2xx SSP ports
-
-config PXA_SSP_LEGACY
-	bool
-	help
-	  Support of legacy SSP API
-
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
 	depends on MACH_TOSA
@@ -675,6 +656,18 @@
 	  This is a simple driver that is able to control
 	  the state of built in bluetooth chip on tosa.
 
+config TOSA_USE_EXT_KEYCODES
+	bool "Tosa keyboard: use extended keycodes"
+	depends on MACH_TOSA
+	default n
+	help
+	  Say Y here to enable the tosa keyboard driver to generate extended
+	  (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+	  by either console keyboard driver or by Kdrive keybd driver.
+
+	  Say Y only if you know, what you are doing!
+
+
 config PXA_HAVE_BOARD_IRQS
 	bool
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/littleton.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/littleton.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/littleton.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/littleton.c	2010-08-01 18:11:14.000000000 -0400
@@ -41,7 +41,6 @@
 
 #include <mach/pxa300.h>
 #include <mach/pxafb.h>
-#include <mach/ssp.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/pxa27x_keypad.h>
@@ -272,7 +271,7 @@
 
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static struct pxamci_platform_data littleton_mci_platform_data = {
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.gpio_card_detect	= GPIO_MMC1_CARD_DETECT,
 	.gpio_card_ro		= -1,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/lubbock.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/lubbock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/lubbock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/lubbock.c	2010-08-01 18:11:14.000000000 -0400
@@ -478,7 +478,7 @@
 
 static struct pxamci_platform_data lubbock_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay		= 1,
+	.detect_delay_ms	= 10,
 	.init 			= lubbock_mci_init,
 	.get_ro			= lubbock_mci_get_ro,
 	.exit 			= lubbock_mci_exit,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-pxa/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -14,7 +14,6 @@
 endif
 
 # Generic drivers that other drivers may depend upon
-obj-$(CONFIG_PXA_SSP)		+= ssp.o
 
 # SoC-specific code
 obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
@@ -62,6 +61,7 @@
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
+obj-$(CONFIG_MACH_VPAC270)	+= vpac270.o
 
 # End-user Products
 obj-$(CONFIG_MACH_H4700)	+= hx4700.o
@@ -80,7 +80,6 @@
 obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
-obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
@@ -94,6 +93,7 @@
 obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
+obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
 # Support for blinky lights
 led-y := leds.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/mfp-pxa2xx.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/mfp-pxa2xx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/mfp-pxa2xx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/mfp-pxa2xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -81,6 +81,7 @@
 		PGSR(bank) &= ~mask;
 		is_out = 1;
 		break;
+	case MFP_LPM_INPUT:
 	case MFP_LPM_DEFAULT:
 		break;
 	default:
@@ -178,8 +179,17 @@
 	if (!d->valid)
 		return -EINVAL;
 
-	if (d->keypad_gpio)
-		return -EINVAL;
+	/* Allow keypad GPIOs to wakeup system when
+	 * configured as generic GPIOs.
+	 */
+	if (d->keypad_gpio && (MFP_AF(d->config) == 0) &&
+	    (d->config & MFP_LPM_CAN_WAKEUP)) {
+		if (on)
+			PKWR |= d->mask;
+		else
+			PKWR &= ~d->mask;
+		return 0;
+	}
 
 	mux_taken = (PWER & d->mux_mask) & (~d->mask);
 	if (on && mux_taken)
@@ -239,21 +249,25 @@
 int keypad_set_wake(unsigned int on)
 {
 	unsigned int i, gpio, mask = 0;
-
-	if (!on) {
-		PKWR = 0;
-		return 0;
-	}
+	struct gpio_desc *d;
 
 	for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
 
 		gpio = pxa27x_pkwr_gpio[i];
+		d = &gpio_desc[gpio];
 
-		if (gpio_desc[gpio].config & MFP_LPM_CAN_WAKEUP)
+		/* skip if configured as generic GPIO */
+		if (MFP_AF(d->config) == 0)
+			continue;
+
+		if (d->config & MFP_LPM_CAN_WAKEUP)
 			mask |= gpio_desc[gpio].mask;
 	}
 
-	PKWR = mask;
+	if (on)
+		PKWR |= mask;
+	else
+		PKWR &= ~mask;
 	return 0;
 }
 
@@ -328,6 +342,17 @@
 {
 	int i;
 
+	/* set corresponding PGSR bit of those marked MFP_LPM_KEEP_OUTPUT */
+	for (i = 0; i < pxa_last_gpio; i++) {
+		if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
+		    (GPDR(i) & GPIO_bit(i))) {
+			if (GPLR(i) & GPIO_bit(i))
+				PGSR(i) |= GPIO_bit(i);
+			else
+				PGSR(i) &= ~GPIO_bit(i);
+		}
+	}
+
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
 
 		saved_gafr[0][i] = GAFR_L(i);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/mioa701.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/mioa701.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/mioa701.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/mioa701.c	2010-08-01 18:11:14.000000000 -0400
@@ -426,6 +426,7 @@
  * to give the card a chance to fully insert/eject.
  */
 static struct pxamci_platform_data mioa701_mci_info = {
+	.detect_delay_ms	= 250,
 	.ocr_mask 		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.gpio_card_detect	= GPIO15_SDIO_INSERT,
 	.gpio_card_ro		= GPIO78_SDIO_RO,
@@ -696,7 +697,7 @@
 };
 
 /* Board I2C devices. */
-static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
+static struct i2c_board_info mioa701_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("mt9m111", 0x5d),
 	},
@@ -791,7 +792,6 @@
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
 	set_pxa_fb_info(&mioa701_pxafb_info);
-	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	wm97xx_bat_set_pdata(&mioa701_battery_data);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/mxm8x10.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/mxm8x10.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/mxm8x10.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/mxm8x10.c	2010-08-01 18:11:14.000000000 -0400
@@ -325,7 +325,7 @@
 #if defined(CONFIG_MMC)
 static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
 	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.detect_delay = 1,
+	.detect_delay_ms = 10,
 	.gpio_card_detect = MXM_8X10_SD_nCD,
 	.gpio_card_ro = MXM_8X10_SD_WP,
 	.gpio_power = -1
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/palmld.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/palmld.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/palmld.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/palmld.c	2010-08-01 18:11:14.000000000 -0400
@@ -168,7 +168,7 @@
 	.gpio_card_detect	= GPIO_NR_PALMLD_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_PALMLD_SD_READONLY,
 	.gpio_power		= GPIO_NR_PALMLD_SD_POWER,
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 };
 
 /******************************************************************************
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/palmt5.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/palmt5.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/palmt5.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/palmt5.c	2010-08-01 18:11:14.000000000 -0400
@@ -110,7 +110,7 @@
 	.gpio_card_detect	= GPIO_NR_PALMT5_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_PALMT5_SD_READONLY,
 	.gpio_power		= GPIO_NR_PALMT5_SD_POWER,
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 };
 
 /******************************************************************************
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/palmtc.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/palmtc.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/palmtc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/palmtc.c	2010-08-01 18:11:14.000000000 -0400
@@ -121,7 +121,7 @@
 	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
 	.gpio_card_ro		= GPIO_NR_PALMTC_SD_READONLY,
 	.gpio_card_detect	= GPIO_NR_PALMTC_SD_DETECT_N,
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 };
 
 /******************************************************************************
@@ -263,11 +263,11 @@
 	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
 };
 
-const static unsigned int palmtc_keypad_row_gpios[] = {
+static const unsigned int palmtc_keypad_row_gpios[] = {
 	0, 9, 10, 11
 };
 
-const static unsigned int palmtc_keypad_col_gpios[] = {
+static const unsigned int palmtc_keypad_col_gpios[] = {
 	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/palmtx.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/palmtx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/palmtx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/palmtx.c	2010-08-01 18:11:14.000000000 -0400
@@ -170,7 +170,7 @@
 	.gpio_card_detect	= GPIO_NR_PALMTX_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_PALMTX_SD_READONLY,
 	.gpio_power		= GPIO_NR_PALMTX_SD_POWER,
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 };
 
 /******************************************************************************
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/pcm990-baseboard.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/pcm990-baseboard.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/pcm990-baseboard.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/pcm990-baseboard.c	2010-08-01 18:11:14.000000000 -0400
@@ -326,7 +326,7 @@
 #define MSECS_PER_JIFFY (1000/HZ)
 
 static struct pxamci_platform_data pcm990_mci_platform_data = {
-	.detect_delay		= 250 / MSECS_PER_JIFFY,
+	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.init 			= pcm990_mci_init,
 	.setpower 		= pcm990_mci_setpower,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/poodle.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/poodle.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/poodle.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/poodle.c	2010-08-01 18:11:14.000000000 -0400
@@ -40,13 +40,12 @@
 #include <mach/pxa25x.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
-#include <plat/i2c.h>
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
 #include <mach/sharpsl.h>
-#include <mach/ssp.h>
 #include <mach/pxa2xx_spi.h>
+#include <plat/i2c.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
@@ -277,6 +276,7 @@
 }
 
 static struct pxamci_platform_data poodle_mci_platform_data = {
+	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
 	.init 			= poodle_mci_init,
 	.setpower 		= poodle_mci_setpower,
@@ -450,7 +450,6 @@
 	set_pxa_fb_parent(&poodle_locomo_device.dev);
 	set_pxa_fb_info(&poodle_fb_info);
 	pxa_set_udc_info(&udc_info);
-	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/pxa27x.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/pxa27x.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/pxa27x.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/pxa27x.c	2010-08-01 18:11:14.000000000 -0400
@@ -41,10 +41,10 @@
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
 static unsigned long ac97_reset_config[] = {
-	GPIO95_AC97_nRESET,
-	GPIO95_GPIO,
-	GPIO113_AC97_nRESET,
 	GPIO113_GPIO,
+	GPIO113_AC97_nRESET,
+	GPIO95_GPIO,
+	GPIO95_AC97_nRESET,
 };
 
 void pxa27x_assert_ac97reset(int reset_gpio, int on)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/pxa3xx.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/pxa3xx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/pxa3xx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/pxa3xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -29,7 +29,6 @@
 #include <mach/ohci.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
-#include <mach/ssp.h>
 #include <mach/regs-intc.h>
 #include <plat/i2c.h>
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/raumfeld.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/raumfeld.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/raumfeld.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/raumfeld.c	2010-08-01 18:11:14.000000000 -0400
@@ -714,7 +714,7 @@
 static struct pxamci_platform_data raumfeld_mci_platform_data = {
 	.init			= raumfeld_mci_init,
 	.exit			= raumfeld_mci_exit,
-	.detect_delay		= 20,
+	.detect_delay_ms	= 200,
 	.gpio_card_detect	= -1,
 	.gpio_card_ro		= -1,
 	.gpio_power		= -1,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/sharpsl.h linux-libre-2.6.35-gnu/arch/arm/mach-pxa/sharpsl.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/sharpsl.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/sharpsl.h	2010-08-01 18:11:14.000000000 -0400
@@ -10,29 +10,6 @@
 #include <mach/sharpsl_pm.h>
 
 /*
- * SharpSL SSP Driver
- */
-struct corgissp_machinfo {
-	int port;
-	int cs_lcdcon;
-	int cs_ads7846;
-	int cs_max1111;
-	int clk_lcdcon;
-	int clk_ads7846;
-	int clk_max1111;
-};
-
-void corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo);
-
-
-/*
- * SharpSL/Corgi LCD Driver
- */
-void corgi_lcdtg_suspend(void);
-void corgi_lcdtg_hw_init(int mode);
-
-
-/*
  * SharpSL Battery/PM Driver
  */
 #define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/sharpsl_pm.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/sharpsl_pm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/sharpsl_pm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/sharpsl_pm.c	2010-08-01 18:11:14.000000000 -0400
@@ -28,7 +28,6 @@
 #include <asm/mach-types.h>
 #include <mach/pm.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
 #include <mach/regs-rtc.h>
 #include <mach/sharpsl.h>
 #include <mach/sharpsl_pm.h>
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/spitz.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/spitz.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/spitz.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/spitz.c	2010-08-01 18:11:14.000000000 -0400
@@ -86,6 +86,7 @@
 
 	/* GPIOs */
 	GPIO9_GPIO,	/* SPITZ_GPIO_nSD_DETECT */
+	GPIO16_GPIO,	/* SPITZ_GPIO_SYNC */
 	GPIO81_GPIO,	/* SPITZ_GPIO_nSD_WP */
 	GPIO41_GPIO,	/* SPITZ_GPIO_USB_CONNECT */
 	GPIO37_GPIO,	/* SPITZ_GPIO_USB_HOST */
@@ -119,7 +120,8 @@
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
 
-	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* SPITZ_GPIO_KEY_INT */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_FALL,	/* SPITZ_GPIO_RESET */
 };
 
 /*
@@ -537,6 +539,7 @@
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
+	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
 	.setpower 		= spitz_mci_setpower,
 	.gpio_card_detect	= SPITZ_GPIO_nSD_DETECT,
@@ -757,7 +760,6 @@
 	spitz_init_spi();
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
-	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&spitz_mci_platform_data);
 	pxa_set_ohci_info(&spitz_ohci_platform_data);
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
@@ -816,6 +818,9 @@
 		.type		= "max7310",
 		.addr		= 0x18,
 		.platform_data	= &akita_ioexp,
+	}, {
+		.type		= "wm8750",
+		.addr		= 0x1b,
 	},
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/spitz_pm.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/spitz_pm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/spitz_pm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/spitz_pm.c	2010-08-01 18:11:14.000000000 -0400
@@ -24,9 +24,10 @@
 
 #include <mach/sharpsl.h>
 #include <mach/spitz.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa27x.h>
+
 #include "sharpsl.h"
+#include "generic.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
 #define SHARPSL_CHARGE_ON_TEMP         0xe0  /* 2.9V */
@@ -37,10 +38,17 @@
 
 static int spitz_last_ac_status;
 
+static struct gpio spitz_charger_gpios[] = {
+	{ SPITZ_GPIO_KEY_INT,	GPIOF_IN, "Keyboard Interrupt" },
+	{ SPITZ_GPIO_SYNC,	GPIOF_IN, "Sync" },
+	{ SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
+	{ SPITZ_GPIO_JK_B,	  GPIOF_OUT_INIT_LOW, "JK B" },
+	{ SPITZ_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
+};
+
 static void spitz_charger_init(void)
 {
-	pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
-	pxa_gpio_mode(SPITZ_GPIO_SYNC | GPIO_IN);
+	gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios));
 }
 
 static void spitz_measure_temp(int on)
@@ -76,6 +84,11 @@
 	gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
 }
 
+static unsigned long gpio18_config[] = {
+	GPIO18_RDY,
+	GPIO18_GPIO,
+};
+
 static void spitz_presuspend(void)
 {
 	spitz_last_ac_status = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
@@ -97,7 +110,9 @@
 	PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
 	PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
 
-	pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH);
+	pxa2xx_mfp_config(&gpio18_config[0], 1);
+	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
+	gpio_free(18);
 
 	PRER = GPIO_bit(SPITZ_GPIO_KEY_INT);
 	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
@@ -114,8 +129,7 @@
 
 static void spitz_postsuspend(void)
 {
-	pxa_gpio_mode(GPIO18_RDY_MD);
-	pxa_gpio_mode(10 | GPIO_IN);
+	pxa2xx_mfp_config(&gpio18_config[1], 1);
 }
 
 static int spitz_should_wakeup(unsigned int resume_on_alarm)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/ssp.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/ssp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/ssp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/ssp.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,510 +0,0 @@
-/*
- *  linux/arch/arm/mach-pxa/ssp.c
- *
- *  based on linux/arch/arm/mach-sa1100/ssp.c by Russell King
- *
- *  Copyright (C) 2003 Russell King.
- *  Copyright (C) 2003 Wolfson Microelectronics PLC
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  PXA2xx SSP driver.  This provides the generic core for simple
- *  IO-based SSP applications and allows easy port setup for DMA access.
- *
- *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/ssp.h>
-#include <mach/regs-ssp.h>
-
-#ifdef CONFIG_PXA_SSP_LEGACY
-
-#define TIMEOUT 100000
-
-static irqreturn_t ssp_interrupt(int irq, void *dev_id)
-{
-	struct ssp_dev *dev = dev_id;
-	struct ssp_device *ssp = dev->ssp;
-	unsigned int status;
-
-	status = __raw_readl(ssp->mmio_base + SSSR);
-	__raw_writel(status, ssp->mmio_base + SSSR);
-
-	if (status & SSSR_ROR)
-		printk(KERN_WARNING "SSP(%d): receiver overrun\n", dev->port);
-
-	if (status & SSSR_TUR)
-		printk(KERN_WARNING "SSP(%d): transmitter underrun\n", dev->port);
-
-	if (status & SSSR_BCE)
-		printk(KERN_WARNING "SSP(%d): bit count error\n", dev->port);
-
-	return IRQ_HANDLED;
-}
-
-/**
- * ssp_write_word - write a word to the SSP port
- * @data: 32-bit, MSB justified data to write.
- *
- * Wait for a free entry in the SSP transmit FIFO, and write a data
- * word to the SSP port.
- *
- * The caller is expected to perform the necessary locking.
- *
- * Returns:
- *   %-ETIMEDOUT	timeout occurred
- *   0			success
- */
-int ssp_write_word(struct ssp_dev *dev, u32 data)
-{
-	struct ssp_device *ssp = dev->ssp;
-	int timeout = TIMEOUT;
-
-	while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_TNF)) {
-	        if (!--timeout)
-	        	return -ETIMEDOUT;
-		cpu_relax();
-	}
-
-	__raw_writel(data, ssp->mmio_base + SSDR);
-
-	return 0;
-}
-
-/**
- * ssp_read_word - read a word from the SSP port
- *
- * Wait for a data word in the SSP receive FIFO, and return the
- * received data.  Data is LSB justified.
- *
- * Note: Currently, if data is not expected to be received, this
- * function will wait for ever.
- *
- * The caller is expected to perform the necessary locking.
- *
- * Returns:
- *   %-ETIMEDOUT	timeout occurred
- *   32-bit data	success
- */
-int ssp_read_word(struct ssp_dev *dev, u32 *data)
-{
-	struct ssp_device *ssp = dev->ssp;
-	int timeout = TIMEOUT;
-
-	while (!(__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE)) {
-	        if (!--timeout)
-	        	return -ETIMEDOUT;
-		cpu_relax();
-	}
-
-	*data = __raw_readl(ssp->mmio_base + SSDR);
-	return 0;
-}
-
-/**
- * ssp_flush - flush the transmit and receive FIFOs
- *
- * Wait for the SSP to idle, and ensure that the receive FIFO
- * is empty.
- *
- * The caller is expected to perform the necessary locking.
- */
-int ssp_flush(struct ssp_dev *dev)
-{
-	struct ssp_device *ssp = dev->ssp;
-	int timeout = TIMEOUT * 2;
-
-	/* ensure TX FIFO is empty instead of not full */
-	if (cpu_is_pxa3xx()) {
-		while (__raw_readl(ssp->mmio_base + SSSR) & 0xf00) {
-			if (!--timeout)
-				return -ETIMEDOUT;
-			cpu_relax();
-		}
-		timeout = TIMEOUT * 2;
-	}
-
-	do {
-		while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_RNE) {
-		        if (!--timeout)
-		        	return -ETIMEDOUT;
-			(void)__raw_readl(ssp->mmio_base + SSDR);
-		}
-	        if (!--timeout)
-	        	return -ETIMEDOUT;
-	} while (__raw_readl(ssp->mmio_base + SSSR) & SSSR_BSY);
-
-	return 0;
-}
-
-/**
- * ssp_enable - enable the SSP port
- *
- * Turn on the SSP port.
- */
-void ssp_enable(struct ssp_dev *dev)
-{
-	struct ssp_device *ssp = dev->ssp;
-	uint32_t sscr0;
-
-	sscr0 = __raw_readl(ssp->mmio_base + SSCR0);
-	sscr0 |= SSCR0_SSE;
-	__raw_writel(sscr0, ssp->mmio_base + SSCR0);
-}
-
-/**
- * ssp_disable - shut down the SSP port
- *
- * Turn off the SSP port, optionally powering it down.
- */
-void ssp_disable(struct ssp_dev *dev)
-{
-	struct ssp_device *ssp = dev->ssp;
-	uint32_t sscr0;
-
-	sscr0 = __raw_readl(ssp->mmio_base + SSCR0);
-	sscr0 &= ~SSCR0_SSE;
-	__raw_writel(sscr0, ssp->mmio_base + SSCR0);
-}
-
-/**
- * ssp_save_state - save the SSP configuration
- * @ssp: pointer to structure to save SSP configuration
- *
- * Save the configured SSP state for suspend.
- */
-void ssp_save_state(struct ssp_dev *dev, struct ssp_state *state)
-{
-	struct ssp_device *ssp = dev->ssp;
-
-	state->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
-	state->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
-	state->to  = __raw_readl(ssp->mmio_base + SSTO);
-	state->psp = __raw_readl(ssp->mmio_base + SSPSP);
-
-	ssp_disable(dev);
-}
-
-/**
- * ssp_restore_state - restore a previously saved SSP configuration
- * @ssp: pointer to configuration saved by ssp_save_state
- *
- * Restore the SSP configuration saved previously by ssp_save_state.
- */
-void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *state)
-{
-	struct ssp_device *ssp = dev->ssp;
-	uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
-
-	__raw_writel(sssr, ssp->mmio_base + SSSR);
-
-	__raw_writel(state->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
-	__raw_writel(state->cr1, ssp->mmio_base + SSCR1);
-	__raw_writel(state->to,  ssp->mmio_base + SSTO);
-	__raw_writel(state->psp, ssp->mmio_base + SSPSP);
-	__raw_writel(state->cr0, ssp->mmio_base + SSCR0);
-}
-
-/**
- * ssp_config - configure SSP port settings
- * @mode: port operating mode
- * @flags: port config flags
- * @psp_flags: port PSP config flags
- * @speed: port speed
- *
- * Port MUST be disabled by ssp_disable before making any config changes.
- */
-int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed)
-{
-	struct ssp_device *ssp = dev->ssp;
-
-	dev->mode = mode;
-	dev->flags = flags;
-	dev->psp_flags = psp_flags;
-	dev->speed = speed;
-
-	/* set up port type, speed, port settings */
-	__raw_writel((dev->speed | dev->mode), ssp->mmio_base + SSCR0);
-	__raw_writel(dev->flags, ssp->mmio_base + SSCR1);
-	__raw_writel(dev->psp_flags, ssp->mmio_base + SSPSP);
-
-	return 0;
-}
-
-/**
- * ssp_init - setup the SSP port
- *
- * initialise and claim resources for the SSP port.
- *
- * Returns:
- *   %-ENODEV	if the SSP port is unavailable
- *   %-EBUSY	if the resources are already in use
- *   %0		on success
- */
-int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
-{
-	struct ssp_device *ssp;
-	int ret;
-
-	ssp = ssp_request(port, "SSP");
-	if (ssp == NULL)
-		return -ENODEV;
-
-	dev->ssp = ssp;
-	dev->port = port;
-
-	/* do we need to get irq */
-	if (!(init_flags & SSP_NO_IRQ)) {
-		ret = request_irq(ssp->irq, ssp_interrupt,
-				0, "SSP", dev);
-	    	if (ret)
-			goto out_region;
-		dev->irq = ssp->irq;
-	} else
-		dev->irq = NO_IRQ;
-
-	/* turn on SSP port clock */
-	clk_enable(ssp->clk);
-	return 0;
-
-out_region:
-	ssp_free(ssp);
-	return ret;
-}
-
-/**
- * ssp_exit - undo the effects of ssp_init
- *
- * release and free resources for the SSP port.
- */
-void ssp_exit(struct ssp_dev *dev)
-{
-	struct ssp_device *ssp = dev->ssp;
-
-	ssp_disable(dev);
-	if (dev->irq != NO_IRQ)
-		free_irq(dev->irq, dev);
-	clk_disable(ssp->clk);
-	ssp_free(ssp);
-}
-#endif /* CONFIG_PXA_SSP_LEGACY */
-
-static DEFINE_MUTEX(ssp_lock);
-static LIST_HEAD(ssp_list);
-
-struct ssp_device *ssp_request(int port, const char *label)
-{
-	struct ssp_device *ssp = NULL;
-
-	mutex_lock(&ssp_lock);
-
-	list_for_each_entry(ssp, &ssp_list, node) {
-		if (ssp->port_id == port && ssp->use_count == 0) {
-			ssp->use_count++;
-			ssp->label = label;
-			break;
-		}
-	}
-
-	mutex_unlock(&ssp_lock);
-
-	if (&ssp->node == &ssp_list)
-		return NULL;
-
-	return ssp;
-}
-EXPORT_SYMBOL(ssp_request);
-
-void ssp_free(struct ssp_device *ssp)
-{
-	mutex_lock(&ssp_lock);
-	if (ssp->use_count) {
-		ssp->use_count--;
-		ssp->label = NULL;
-	} else
-		dev_err(&ssp->pdev->dev, "device already free\n");
-	mutex_unlock(&ssp_lock);
-}
-EXPORT_SYMBOL(ssp_free);
-
-static int __devinit ssp_probe(struct platform_device *pdev)
-{
-	const struct platform_device_id *id = platform_get_device_id(pdev);
-	struct resource *res;
-	struct ssp_device *ssp;
-	int ret = 0;
-
-	ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL);
-	if (ssp == NULL) {
-		dev_err(&pdev->dev, "failed to allocate memory");
-		return -ENOMEM;
-	}
-	ssp->pdev = pdev;
-
-	ssp->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(ssp->clk)) {
-		ret = PTR_ERR(ssp->clk);
-		goto err_free;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no memory resource defined\n");
-		ret = -ENODEV;
-		goto err_free_clk;
-	}
-
-	res = request_mem_region(res->start, res->end - res->start + 1,
-			pdev->name);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "failed to request memory resource\n");
-		ret = -EBUSY;
-		goto err_free_clk;
-	}
-
-	ssp->phys_base = res->start;
-
-	ssp->mmio_base = ioremap(res->start, res->end - res->start + 1);
-	if (ssp->mmio_base == NULL) {
-		dev_err(&pdev->dev, "failed to ioremap() registers\n");
-		ret = -ENODEV;
-		goto err_free_mem;
-	}
-
-	ssp->irq = platform_get_irq(pdev, 0);
-	if (ssp->irq < 0) {
-		dev_err(&pdev->dev, "no IRQ resource defined\n");
-		ret = -ENODEV;
-		goto err_free_io;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no SSP RX DRCMR defined\n");
-		ret = -ENODEV;
-		goto err_free_io;
-	}
-	ssp->drcmr_rx = res->start;
-
-	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (res == NULL) {
-		dev_err(&pdev->dev, "no SSP TX DRCMR defined\n");
-		ret = -ENODEV;
-		goto err_free_io;
-	}
-	ssp->drcmr_tx = res->start;
-
-	/* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
-	 * starts from 0, do a translation here
-	 */
-	ssp->port_id = pdev->id + 1;
-	ssp->use_count = 0;
-	ssp->type = (int)id->driver_data;
-
-	mutex_lock(&ssp_lock);
-	list_add(&ssp->node, &ssp_list);
-	mutex_unlock(&ssp_lock);
-
-	platform_set_drvdata(pdev, ssp);
-	return 0;
-
-err_free_io:
-	iounmap(ssp->mmio_base);
-err_free_mem:
-	release_mem_region(res->start, res->end - res->start + 1);
-err_free_clk:
-	clk_put(ssp->clk);
-err_free:
-	kfree(ssp);
-	return ret;
-}
-
-static int __devexit ssp_remove(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct ssp_device *ssp;
-
-	ssp = platform_get_drvdata(pdev);
-	if (ssp == NULL)
-		return -ENODEV;
-
-	iounmap(ssp->mmio_base);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, res->end - res->start + 1);
-
-	clk_put(ssp->clk);
-
-	mutex_lock(&ssp_lock);
-	list_del(&ssp->node);
-	mutex_unlock(&ssp_lock);
-
-	kfree(ssp);
-	return 0;
-}
-
-static const struct platform_device_id ssp_id_table[] = {
-	{ "pxa25x-ssp",		PXA25x_SSP },
-	{ "pxa25x-nssp",	PXA25x_NSSP },
-	{ "pxa27x-ssp",		PXA27x_SSP },
-	{ },
-};
-
-static struct platform_driver ssp_driver = {
-	.probe		= ssp_probe,
-	.remove		= __devexit_p(ssp_remove),
-	.driver		= {
-		.owner	= THIS_MODULE,
-		.name	= "pxa2xx-ssp",
-	},
-	.id_table	= ssp_id_table,
-};
-
-static int __init pxa_ssp_init(void)
-{
-	return platform_driver_register(&ssp_driver);
-}
-
-static void __exit pxa_ssp_exit(void)
-{
-	platform_driver_unregister(&ssp_driver);
-}
-
-arch_initcall(pxa_ssp_init);
-module_exit(pxa_ssp_exit);
-
-#ifdef CONFIG_PXA_SSP_LEGACY
-EXPORT_SYMBOL(ssp_write_word);
-EXPORT_SYMBOL(ssp_read_word);
-EXPORT_SYMBOL(ssp_flush);
-EXPORT_SYMBOL(ssp_enable);
-EXPORT_SYMBOL(ssp_disable);
-EXPORT_SYMBOL(ssp_save_state);
-EXPORT_SYMBOL(ssp_restore_state);
-EXPORT_SYMBOL(ssp_init);
-EXPORT_SYMBOL(ssp_exit);
-EXPORT_SYMBOL(ssp_config);
-#endif
-
-MODULE_DESCRIPTION("PXA SSP driver");
-MODULE_AUTHOR("Liam Girdwood");
-MODULE_LICENSE("GPL");
-
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/stargate2.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/stargate2.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/stargate2.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/stargate2.c	2010-08-01 18:11:14.000000000 -0400
@@ -464,8 +464,6 @@
 
 
 
-static struct pxamci_platform_data stargate2_mci_platform_data;
-
 /*
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert / eject.
@@ -489,8 +487,6 @@
 		goto free_power_en;
 	}
 	gpio_direction_input(SG2_GPIO_nSD_DETECT);
-	/* Delay to allow for full insertion */
-	stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
 	err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
 			  stargate2_detect_int,
@@ -529,6 +525,7 @@
 }
 
 static struct pxamci_platform_data stargate2_mci_platform_data = {
+	.detect_delay_ms = 250,
 	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
 	.init = stargate2_mci_init,
 	.setpower = stargate2_mci_setpower,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/tosa.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/tosa.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/tosa.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/tosa.c	2010-08-01 18:11:14.000000000 -0400
@@ -275,6 +275,7 @@
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
+	.detect_delay_ms	= 250,
 	.ocr_mask       	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.init           	= tosa_mci_init,
 	.exit           	= tosa_mci_exit,
@@ -926,7 +927,6 @@
 	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
 	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
 
-	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/trizeps4.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/trizeps4.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/trizeps4.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/trizeps4.c	2010-08-01 18:11:14.000000000 -0400
@@ -349,7 +349,7 @@
 
 static struct pxamci_platform_data trizeps4_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay	= 1,
+	.detect_delay_ms= 10,
 	.init 		= trizeps4_mci_init,
 	.exit		= trizeps4_mci_exit,
 	.get_ro		= NULL,	/* write-protection not supported */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/vpac270.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/vpac270.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/vpac270.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/vpac270.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,615 @@
+/*
+ * Hardware definitions for Voipac PXA270
+ *
+ * Copyright (C) 2010
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/sysdev.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/onenand.h>
+#include <linux/dm9000.h>
+#include <linux/ucb1400.h>
+#include <linux/ata_platform.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/audio.h>
+#include <mach/vpac270.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/udc.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long vpac270_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO53_GPIO,	/* SD detect */
+	GPIO52_GPIO,	/* SD r/o switch */
+
+	/* GPIO KEYS */
+	GPIO1_GPIO,	/* USER BTN */
+
+	/* LEDs */
+	GPIO15_GPIO,	/* orange led */
+
+	/* FFUART */
+	GPIO34_FFUART_RXD,
+	GPIO39_FFUART_TXD,
+	GPIO27_FFUART_RTS,
+	GPIO100_FFUART_CTS,
+	GPIO33_FFUART_DSR,
+	GPIO40_FFUART_DTR,
+	GPIO10_FFUART_DCD,
+	GPIO38_FFUART_RI,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO86_LCD_LDD_16,
+	GPIO87_LCD_LDD_17,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* PCMCIA */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO57_nIOIS16,
+	GPIO56_nPWAIT,
+	GPIO104_PSKTSEL,
+	GPIO84_GPIO,	/* PCMCIA CD */
+	GPIO35_GPIO,	/* PCMCIA RDY */
+	GPIO107_GPIO,	/* PCMCIA PPEN */
+	GPIO11_GPIO,	/* PCMCIA RESET */
+	GPIO17_GPIO,	/* CF CD */
+	GPIO12_GPIO,	/* CF RDY */
+	GPIO16_GPIO,	/* CF RESET */
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	GPIO119_USBH2_PWR,
+	GPIO120_USBH2_PEN,
+
+	/* UDC */
+	GPIO41_GPIO,
+
+	/* Ethernet */
+	GPIO114_GPIO,	/* IRQ */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO95_AC97_nRESET,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_GPIO,	/* TS IRQ */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* IDE */
+	GPIO36_GPIO,	/* IDE IRQ */
+	GPIO80_DREQ_1,
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition vpac270_nor_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data vpac270_flash_data[] = {
+	{
+		.width		= 2,	/* bankwidth in bytes */
+		.parts		= vpac270_nor_partitions,
+		.nr_parts	= ARRAY_SIZE(vpac270_nor_partitions)
+	}
+};
+
+static struct resource vpac270_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device vpac270_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &vpac270_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = vpac270_flash_data,
+	},
+};
+static void __init vpac270_nor_init(void)
+{
+	platform_device_register(&vpac270_flash);
+}
+#else
+static inline void vpac270_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * OneNAND Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
+static struct mtd_partition vpac270_onenand_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct onenand_platform_data vpac270_onenand_info = {
+	.parts		= vpac270_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(vpac270_onenand_partitions),
+};
+
+static struct resource vpac270_onenand_resources[] = {
+	[0] = {
+		.start	= PXA_CS0_PHYS,
+		.end	= PXA_CS0_PHYS + SZ_1M,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device vpac270_onenand = {
+	.name		= "onenand-flash",
+	.id		= -1,
+	.resource	= vpac270_onenand_resources,
+	.num_resources	= ARRAY_SIZE(vpac270_onenand_resources),
+	.dev		= {
+		.platform_data	= &vpac270_onenand_info,
+	},
+};
+
+static void __init vpac270_onenand_init(void)
+{
+	platform_device_register(&vpac270_onenand);
+}
+#else
+static void __init vpac270_onenand_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data vpac270_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO53_VPAC270_SD_DETECT_N,
+	.gpio_card_ro		= GPIO52_VPAC270_SD_READONLY,
+	.detect_delay_ms	= 200,
+};
+
+static void __init vpac270_mmc_init(void)
+{
+	pxa_set_mci_info(&vpac270_mci_platform_data);
+}
+#else
+static inline void vpac270_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button vpac270_pxa_buttons[] = {
+	{KEY_POWER, GPIO1_VPAC270_USER_BTN, 0, "USER BTN"},
+};
+
+static struct gpio_keys_platform_data vpac270_pxa_keys_data = {
+	.buttons	= vpac270_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(vpac270_pxa_buttons),
+};
+
+static struct platform_device vpac270_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &vpac270_pxa_keys_data,
+	},
+};
+
+static void __init vpac270_keys_init(void)
+{
+	platform_device_register(&vpac270_pxa_keys);
+}
+#else
+static inline void vpac270_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * LED
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led vpac270_gpio_leds[] = {
+{
+	.name			= "vpac270:orange:user",
+	.default_trigger	= "none",
+	.gpio			= GPIO15_VPAC270_LED_ORANGE,
+	.active_low		= 1,
+}
+};
+
+static struct gpio_led_platform_data vpac270_gpio_led_info = {
+	.leds		= vpac270_gpio_leds,
+	.num_leds	= ARRAY_SIZE(vpac270_gpio_leds),
+};
+
+static struct platform_device vpac270_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &vpac270_gpio_led_info,
+	}
+};
+
+static void __init vpac270_leds_init(void)
+{
+	platform_device_register(&vpac270_leds);
+}
+#else
+static inline void vpac270_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int vpac270_ohci_init(struct device *dev)
+{
+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+	return 0;
+}
+
+static struct pxaohci_platform_data vpac270_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+			POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	.init		= vpac270_ohci_init,
+};
+
+static void __init vpac270_uhc_init(void)
+{
+	pxa_set_ohci_info(&vpac270_ohci_info);
+}
+#else
+static inline void vpac270_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
+	.gpio_vbus		= GPIO41_VPAC270_UDC_DETECT,
+	.gpio_pullup		= -1,
+};
+
+static struct platform_device vpac270_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &vpac270_gpio_vbus_info,
+	},
+};
+
+static void vpac270_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR = UP2OCR_HXOE;
+}
+
+static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
+	.udc_command		= vpac270_udc_command,
+	.gpio_pullup		= -1,
+};
+
+static void __init vpac270_udc_init(void)
+{
+	pxa_set_udc_info(&vpac270_udc_info);
+	platform_device_register(&vpac270_gpio_vbus);
+}
+#else
+static inline void vpac270_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource vpac270_dm9000_resources[] = {
+	[0] = {
+		.start	= PXA_CS2_PHYS + 0x300,
+		.end	= PXA_CS2_PHYS + 0x303,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_CS2_PHYS + 0x304,
+		.end	= PXA_CS2_PHYS + 0x343,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
+		.end	= IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct dm9000_plat_data vpac270_dm9000_platdata = {
+	.flags		= DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device vpac270_dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(vpac270_dm9000_resources),
+	.resource	= vpac270_dm9000_resources,
+	.dev		= {
+		.platform_data = &vpac270_dm9000_platdata,
+	}
+};
+
+static void __init vpac270_eth_init(void)
+{
+	platform_device_register(&vpac270_dm9000_device);
+}
+#else
+static inline void vpac270_eth_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+	.irq		= IRQ_GPIO(GPIO113_VPAC270_TS_IRQ),
+};
+
+static struct platform_device vpac270_ucb1400_device = {
+	.name		= "ucb1400_core",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &vpac270_ucb1400_pdata,
+	},
+};
+
+static void __init vpac270_ts_init(void)
+{
+	pxa_set_ac97_info(&vpac270_ac97_pdata);
+	platform_device_register(&vpac270_ucb1400_device);
+}
+#else
+static inline void vpac270_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * RTC
+ ******************************************************************************/
+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
+static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("ds1339", 0x68),
+	},
+};
+
+static void __init vpac270_rtc_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
+}
+#else
+static inline void vpac270_rtc_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info vpac270_lcd_modes[] = {
+{
+	.pixclock	= 57692,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 32,
+	.depth		= 18,
+
+	.left_margin	= 144,
+	.right_margin	= 32,
+	.upper_margin	= 13,
+	.lower_margin	= 30,
+
+	.hsync_len	= 32,
+	.vsync_len	= 2,
+
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+},
+};
+
+static struct pxafb_mach_info vpac270_lcd_screen = {
+	.modes		= vpac270_lcd_modes,
+	.num_modes	= ARRAY_SIZE(vpac270_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_18BPP,
+};
+
+static void vpac270_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+	gpio_set_value(GPIO81_VPAC270_BKL_ON, on);
+}
+
+static void __init vpac270_lcd_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO81_VPAC270_BKL_ON, "BKL-ON");
+	if (ret) {
+		pr_err("Requesting BKL-ON GPIO failed!\n");
+		goto err;
+	}
+
+	ret = gpio_direction_output(GPIO81_VPAC270_BKL_ON, 1);
+	if (ret) {
+		pr_err("Setting BKL-ON GPIO direction failed!\n");
+		goto err2;
+	}
+
+	vpac270_lcd_screen.pxafb_lcd_power = vpac270_lcd_power;
+	set_pxa_fb_info(&vpac270_lcd_screen);
+	return;
+
+err2:
+	gpio_free(GPIO81_VPAC270_BKL_ON);
+err:
+	return;
+}
+#else
+static inline void vpac270_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * PATA IDE
+ ******************************************************************************/
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+static struct pata_platform_info vpac270_pata_pdata = {
+	.ioport_shift	= 1,
+	.irq_flags	= IRQF_TRIGGER_RISING,
+};
+
+static struct resource vpac270_ide_resources[] = {
+	[0] = {	/* I/O Base address */
+	       .start	= PXA_CS3_PHYS + 0x120,
+	       .end	= PXA_CS3_PHYS + 0x13f,
+	       .flags	= IORESOURCE_MEM
+	},
+	[1] = {	/* CTL Base address */
+	       .start	= PXA_CS3_PHYS + 0x15c,
+	       .end	= PXA_CS3_PHYS + 0x15f,
+	       .flags	= IORESOURCE_MEM
+	},
+	[2] = {	/* IDE IRQ pin */
+	       .start	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
+	       .end	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
+	       .flags	= IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device vpac270_ide_device = {
+	.name		= "pata_platform",
+	.num_resources	= ARRAY_SIZE(vpac270_ide_resources),
+	.resource	= vpac270_ide_resources,
+	.dev		= {
+		.platform_data	= &vpac270_pata_pdata,
+	}
+};
+
+static void __init vpac270_ide_init(void)
+{
+	platform_device_register(&vpac270_ide_device);
+}
+#else
+static inline void vpac270_ide_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init vpac270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(vpac270_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	vpac270_lcd_init();
+	vpac270_mmc_init();
+	vpac270_nor_init();
+	vpac270_onenand_init();
+	vpac270_leds_init();
+	vpac270_keys_init();
+	vpac270_uhc_init();
+	vpac270_udc_init();
+	vpac270_eth_init();
+	vpac270_ts_init();
+	vpac270_rtc_init();
+	vpac270_ide_init();
+}
+
+MACHINE_START(VPAC270, "Voipac PXA270")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= vpac270_init
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/z2.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/z2.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/z2.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/z2.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,603 @@
+/*
+ *  linux/arch/arm/mach-pxa/z2.c
+ *
+ *  Support for the Zipit Z2 Handheld device.
+ *
+ *  Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ *  Based on research and code by: Ken McGuire
+ *  Based on mainstone.c as modified for the Zipit Z2.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/pwm_backlight.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/libertas_spi.h>
+#include <linux/spi/lms283gf05.h>
+#include <linux/power_supply.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa27x.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/z2.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa2xx_spi.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long z2_pin_config[] = {
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+	GPIO19_GPIO,		/* LCD reset */
+	GPIO88_GPIO,		/* LCD chipselect */
+
+	/* PWM */
+	GPIO115_PWM1_OUT,	/* Keypad Backlight */
+	GPIO11_PWM2_OUT,	/* LCD Backlight */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO96_GPIO,		/* SD detect */
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* Keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO38_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO16_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO17_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO35_KP_MKOUT_6,
+	GPIO41_KP_MKOUT_7,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,	/* SSP1_SCK */
+	GPIO25_SSP1_TXD,	/* SSP1_TXD */
+	GPIO26_SSP1_RXD,	/* SSP1_RXD */
+
+	/* SSP2 */
+	GPIO22_SSP2_SCLK,	/* SSP2_SCK */
+	GPIO13_SSP2_TXD,	/* SSP2_TXD */
+	GPIO40_SSP2_RXD,	/* SSP2_RXD */
+
+	/* LEDs */
+	GPIO10_GPIO,		/* WiFi LED */
+	GPIO83_GPIO,		/* Charging LED */
+	GPIO85_GPIO,		/* Charged LED */
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO113_I2S_SYSCLK,
+
+	/* MISC */
+	GPIO0_GPIO,		/* AC power detect */
+	GPIO1_GPIO,		/* Power button */
+	GPIO37_GPIO,		/* Headphone detect */
+	GPIO98_GPIO,		/* Lid switch */
+	GPIO14_GPIO,		/* WiFi Reset */
+	GPIO15_GPIO,		/* WiFi Power */
+	GPIO24_GPIO,		/* WiFi CS */
+	GPIO36_GPIO,		/* WiFi IRQ */
+	GPIO88_GPIO,		/* LCD CS */
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct resource z2_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_8M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct mtd_partition z2_flash_parts[] = {
+	{
+		.name	= "U-Boot Bootloader",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	}, {
+		.name	= "U-Boot Environment",
+		.offset	= 0x40000,
+		.size	= 0x60000,
+	}, {
+		.name	= "Flash",
+		.offset	= 0x60000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data z2_flash_data = {
+	.width		= 2,
+	.parts		= z2_flash_parts,
+	.nr_parts	= ARRAY_SIZE(z2_flash_parts),
+};
+
+static struct platform_device z2_flash = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &z2_flash_resource,
+	.num_resources	= 1,
+	.dev = {
+		.platform_data	= &z2_flash_data,
+	},
+};
+
+static void __init z2_nor_init(void)
+{
+	platform_device_register(&z2_flash);
+}
+#else
+static inline void z2_nor_init(void) {}
+#endif
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct platform_pwm_backlight_data z2_backlight_data[] = {
+	[0] = {
+		/* Keypad Backlight */
+		.pwm_id		= 1,
+		.max_brightness	= 1023,
+		.dft_brightness	= 512,
+		.pwm_period_ns	= 1260320,
+	},
+	[1] = {
+		/* LCD Backlight */
+		.pwm_id		= 2,
+		.max_brightness	= 1023,
+		.dft_brightness	= 512,
+		.pwm_period_ns	= 1260320,
+	},
+};
+
+static struct platform_device z2_backlight_devices[2] = {
+	{
+		.name	= "pwm-backlight",
+		.id	= 0,
+		.dev	= {
+			.platform_data	= &z2_backlight_data[1],
+		},
+	},
+	{
+		.name	= "pwm-backlight",
+		.id	= 1,
+		.dev	= {
+			.platform_data	= &z2_backlight_data[0],
+		},
+	},
+};
+static void __init z2_pwm_init(void)
+{
+	platform_device_register(&z2_backlight_devices[0]);
+	platform_device_register(&z2_backlight_devices[1]);
+}
+#else
+static inline void z2_pwm_init(void) {}
+#endif
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info z2_lcd_modes[] = {
+{
+	.pixclock	= 192000,
+	.xres		= 240,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 4,
+	.right_margin	= 8,
+	.upper_margin	= 4,
+	.lower_margin	= 8,
+
+	.hsync_len	= 4,
+	.vsync_len	= 4,
+},
+};
+
+static struct pxafb_mach_info z2_lcd_screen = {
+	.modes		= z2_lcd_modes,
+	.num_modes      = ARRAY_SIZE(z2_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_BIAS_ACTIVE_LOW |
+			  LCD_ALTERNATE_MAPPING,
+};
+
+static void __init z2_lcd_init(void)
+{
+	set_pxa_fb_info(&z2_lcd_screen);
+}
+#else
+static inline void z2_lcd_init(void) {}
+#endif
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
+static struct pxamci_platform_data z2_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO96_ZIPITZ2_SD_DETECT,
+	.gpio_power		= -1,
+	.gpio_card_ro		= -1,
+	.detect_delay_ms	= 200,
+};
+
+static void __init z2_mmc_init(void)
+{
+	pxa_set_mci_info(&z2_mci_platform_data);
+}
+#else
+static inline void z2_mmc_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led z2_gpio_leds[] = {
+{
+	.name			= "z2:green:wifi",
+	.default_trigger	= "none",
+	.gpio			= GPIO10_ZIPITZ2_LED_WIFI,
+	.active_low		= 1,
+}, {
+	.name			= "z2:green:charged",
+	.default_trigger	= "none",
+	.gpio			= GPIO85_ZIPITZ2_LED_CHARGED,
+	.active_low		= 1,
+}, {
+	.name			= "z2:amber:charging",
+	.default_trigger	= "none",
+	.gpio			= GPIO83_ZIPITZ2_LED_CHARGING,
+	.active_low		= 1,
+},
+};
+
+static struct gpio_led_platform_data z2_gpio_led_info = {
+	.leds		= z2_gpio_leds,
+	.num_leds	= ARRAY_SIZE(z2_gpio_leds),
+};
+
+static struct platform_device z2_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &z2_gpio_led_info,
+	}
+};
+
+static void __init z2_leds_init(void)
+{
+	platform_device_register(&z2_leds);
+}
+#else
+static inline void z2_leds_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int z2_matrix_keys[] = {
+	KEY(0, 0, KEY_OPTION),
+	KEY(1, 0, KEY_UP),
+	KEY(2, 0, KEY_DOWN),
+	KEY(3, 0, KEY_LEFT),
+	KEY(4, 0, KEY_RIGHT),
+	KEY(5, 0, KEY_END),
+	KEY(6, 0, KEY_KPPLUS),
+
+	KEY(0, 1, KEY_HOME),
+	KEY(1, 1, KEY_Q),
+	KEY(2, 1, KEY_I),
+	KEY(3, 1, KEY_G),
+	KEY(4, 1, KEY_X),
+	KEY(5, 1, KEY_ENTER),
+	KEY(6, 1, KEY_KPMINUS),
+
+	KEY(0, 2, KEY_PAGEUP),
+	KEY(1, 2, KEY_W),
+	KEY(2, 2, KEY_O),
+	KEY(3, 2, KEY_H),
+	KEY(4, 2, KEY_C),
+	KEY(5, 2, KEY_LEFTALT),
+
+	KEY(0, 3, KEY_PAGEDOWN),
+	KEY(1, 3, KEY_E),
+	KEY(2, 3, KEY_P),
+	KEY(3, 3, KEY_J),
+	KEY(4, 3, KEY_V),
+	KEY(5, 3, KEY_LEFTSHIFT),
+
+	KEY(0, 4, KEY_ESC),
+	KEY(1, 4, KEY_R),
+	KEY(2, 4, KEY_A),
+	KEY(3, 4, KEY_K),
+	KEY(4, 4, KEY_B),
+	KEY(5, 4, KEY_LEFTCTRL),
+
+	KEY(0, 5, KEY_TAB),
+	KEY(1, 5, KEY_T),
+	KEY(2, 5, KEY_S),
+	KEY(3, 5, KEY_L),
+	KEY(4, 5, KEY_N),
+	KEY(5, 5, KEY_SPACE),
+
+	KEY(0, 6, KEY_STOPCD),
+	KEY(1, 6, KEY_Y),
+	KEY(2, 6, KEY_D),
+	KEY(3, 6, KEY_BACKSPACE),
+	KEY(4, 6, KEY_M),
+	KEY(5, 6, KEY_COMMA),
+
+	KEY(0, 7, KEY_PLAYCD),
+	KEY(1, 7, KEY_U),
+	KEY(2, 7, KEY_F),
+	KEY(3, 7, KEY_Z),
+	KEY(4, 7, KEY_SEMICOLON),
+	KEY(5, 7, KEY_DOT),
+};
+
+static struct pxa27x_keypad_platform_data z2_keypad_platform_data = {
+	.matrix_key_rows	= 7,
+	.matrix_key_cols	= 8,
+	.matrix_key_map		= z2_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(z2_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+static void __init z2_mkp_init(void)
+{
+	pxa_set_keypad_info(&z2_keypad_platform_data);
+}
+#else
+static inline void z2_mkp_init(void) {}
+#endif
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button z2_pxa_buttons[] = {
+	{KEY_POWER, GPIO1_ZIPITZ2_POWER_BUTTON, 0, "Power Button" },
+	{KEY_CLOSE, GPIO98_ZIPITZ2_LID_BUTTON, 0, "Lid Button" },
+};
+
+static struct gpio_keys_platform_data z2_pxa_keys_data = {
+	.buttons	= z2_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(z2_pxa_buttons),
+};
+
+static struct platform_device z2_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &z2_pxa_keys_data,
+	},
+};
+
+static void __init z2_keys_init(void)
+{
+	platform_device_register(&z2_pxa_keys);
+}
+#else
+static inline void z2_keys_init(void) {}
+#endif
+
+/******************************************************************************
+ * SSP Devices - WiFi and LCD control
+ ******************************************************************************/
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+/* WiFi */
+static int z2_lbs_spi_setup(struct spi_device *spi)
+{
+	int ret = 0;
+
+	ret = gpio_request(GPIO15_ZIPITZ2_WIFI_POWER, "WiFi Power");
+	if (ret)
+		goto err;
+
+	ret = gpio_direction_output(GPIO15_ZIPITZ2_WIFI_POWER, 1);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO14_ZIPITZ2_WIFI_RESET, "WiFi Reset");
+	if (ret)
+		goto err2;
+
+	ret = gpio_direction_output(GPIO14_ZIPITZ2_WIFI_RESET, 0);
+	if (ret)
+		goto err3;
+
+	/* Reset the card */
+	mdelay(180);
+	gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 1);
+	mdelay(20);
+
+	spi->bits_per_word = 16;
+	spi->mode = SPI_MODE_2,
+
+	spi_setup(spi);
+
+	return 0;
+
+err3:
+	gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
+err2:
+	gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
+err:
+	return ret;
+};
+
+static int z2_lbs_spi_teardown(struct spi_device *spi)
+{
+	gpio_set_value(GPIO14_ZIPITZ2_WIFI_RESET, 0);
+	gpio_set_value(GPIO15_ZIPITZ2_WIFI_POWER, 0);
+	gpio_free(GPIO14_ZIPITZ2_WIFI_RESET);
+	gpio_free(GPIO15_ZIPITZ2_WIFI_POWER);
+	return 0;
+
+};
+
+static struct pxa2xx_spi_chip z2_lbs_chip_info = {
+	.rx_threshold	= 8,
+	.tx_threshold	= 8,
+	.timeout	= 1000,
+	.gpio_cs	= GPIO24_ZIPITZ2_WIFI_CS,
+};
+
+static struct libertas_spi_platform_data z2_lbs_pdata = {
+	.use_dummy_writes	= 1,
+	.setup			= z2_lbs_spi_setup,
+	.teardown		= z2_lbs_spi_teardown,
+};
+
+/* LCD */
+static struct pxa2xx_spi_chip lms283_chip_info = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.timeout	= 64,
+	.gpio_cs	= GPIO88_ZIPITZ2_LCD_CS,
+};
+
+static const struct lms283gf05_pdata lms283_pdata = {
+	.reset_gpio	= GPIO19_ZIPITZ2_LCD_RESET,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+{
+	.modalias		= "libertas_spi",
+	.platform_data		= &z2_lbs_pdata,
+	.controller_data	= &z2_lbs_chip_info,
+	.irq			= gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ),
+	.max_speed_hz		= 13000000,
+	.bus_num		= 1,
+	.chip_select		= 0,
+},
+{
+	.modalias		= "lms283gf05",
+	.controller_data	= &lms283_chip_info,
+	.platform_data		= &lms283_pdata,
+	.max_speed_hz		= 400000,
+	.bus_num		= 2,
+	.chip_select		= 0,
+},
+};
+
+static struct pxa2xx_spi_master pxa_ssp1_master_info = {
+	.clock_enable	= CKEN_SSP,
+	.num_chipselect	= 1,
+	.enable_dma	= 1,
+};
+
+static struct pxa2xx_spi_master pxa_ssp2_master_info = {
+	.clock_enable	= CKEN_SSP2,
+	.num_chipselect	= 1,
+};
+
+static void __init z2_spi_init(void)
+{
+	pxa2xx_set_spi_info(1, &pxa_ssp1_master_info);
+	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+}
+#else
+static inline void z2_spi_init(void) {}
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static void __init z2_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(z2_pin_config));
+
+	z2_lcd_init();
+	z2_mmc_init();
+	z2_mkp_init();
+
+	pxa_set_i2c_info(NULL);
+
+	z2_spi_init();
+	z2_nor_init();
+	z2_pwm_init();
+	z2_leds_init();
+	z2_keys_init();
+}
+
+MACHINE_START(ZIPIT2, "Zipit Z2")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= z2_init,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/zeus.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/zeus.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/zeus.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/zeus.c	2010-08-01 18:11:14.000000000 -0400
@@ -414,15 +414,13 @@
 
 static struct mcp251x_platform_data zeus_mcp2515_pdata = {
 	.oscillator_frequency	= 16*1000*1000,
-	.model			= CAN_MCP251X_MCP2515,
 	.board_specific_setup	= zeus_mcp2515_setup,
-	.transceiver_enable	= zeus_mcp2515_transceiver_enable,
 	.power_enable		= zeus_mcp2515_transceiver_enable,
 };
 
 static struct spi_board_info zeus_spi_board_info[] = {
 	[0] = {
-		.modalias	= "mcp251x",
+		.modalias	= "mcp2515",
 		.platform_data	= &zeus_mcp2515_pdata,
 		.irq		= gpio_to_irq(ZEUS_CAN_GPIO),
 		.max_speed_hz	= 1*1000*1000,
@@ -644,7 +642,7 @@
 
 static struct pxamci_platform_data zeus_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay		= HZ/4,
+	.detect_delay_ms	= 250,
 	.gpio_card_detect       = ZEUS_MMC_CD_GPIO,
 	.gpio_card_ro           = ZEUS_MMC_WP_GPIO,
 	.gpio_card_ro_invert	= 1,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-pxa/zylonite.c linux-libre-2.6.35-gnu/arch/arm/mach-pxa/zylonite.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-pxa/zylonite.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-pxa/zylonite.c	2010-08-01 18:11:14.000000000 -0400
@@ -218,7 +218,7 @@
 
 #if defined(CONFIG_MMC)
 static struct pxamci_platform_data zylonite_mci_platform_data = {
-	.detect_delay	= 20,
+	.detect_delay_ms= 200,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.gpio_card_detect = EXT_GPIO(0),
 	.gpio_card_ro	= EXT_GPIO(2),
@@ -226,7 +226,7 @@
 };
 
 static struct pxamci_platform_data zylonite_mci2_platform_data = {
-	.detect_delay	= 20,
+	.detect_delay_ms= 200,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.gpio_card_detect = EXT_GPIO(1),
 	.gpio_card_ro	= EXT_GPIO(3),
@@ -234,7 +234,7 @@
 };
 
 static struct pxamci_platform_data zylonite_mci3_platform_data = {
-	.detect_delay	= 20,
+	.detect_delay_ms= 200,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.gpio_card_detect = EXT_GPIO(30),
 	.gpio_card_ro	= EXT_GPIO(31),
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-realview/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/clock.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,64 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/clock.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include <asm/hardware/icst307.h>
-
-#include "clock.h"
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	struct icst307_vco vco;
-	vco = icst307_khz_to_vco(clk->params, rate / 1000);
-	return icst307_khz(clk->params, vco) * 1000;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EIO;
-
-	if (clk->setvco) {
-		struct icst307_vco vco;
-
-		vco = icst307_khz_to_vco(clk->params, rate / 1000);
-		clk->rate = icst307_khz(clk->params, vco) * 1000;
-		clk->setvco(clk, vco);
-		ret = 0;
-	}
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/clock.h linux-libre-2.6.35-gnu/arch/arm/mach-realview/clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/clock.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,19 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/clock.h
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct module;
-struct icst307_params;
-
-struct clk {
-	unsigned long		rate;
-	const struct icst307_params *params;
-	void			*data;
-	void			(*setvco)(struct clk *, struct icst307_vco vco);
-};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/core.c linux-libre-2.6.35-gnu/arch/arm/mach-realview/core.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/core.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/core.c	2010-08-01 18:11:14.000000000 -0400
@@ -25,8 +25,6 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/ata_platform.h>
@@ -40,7 +38,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst307.h>
+#include <asm/hardware/icst.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -49,13 +47,12 @@
 
 #include <asm/hardware/gic.h>
 
+#include <mach/clkdev.h>
 #include <mach/platform.h>
 #include <mach/irqs.h>
+#include <plat/timer-sp.h>
 
 #include "core.h"
-#include "clock.h"
-
-#define REALVIEW_REFCOUNTER	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
 
 /* used by entry-macro.S and platsmp.c */
 void __iomem *gic_cpu_base_addr;
@@ -79,20 +76,6 @@
 }
 #endif
 
-/*
- * This is the RealView sched_clock implementation.  This has
- * a resolution of 41.7ns, and a maximum value of about 179s.
- */
-unsigned long long sched_clock(void)
-{
-	unsigned long long v;
-
-	v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
-	do_div(v, 3);
-
-	return v;
-}
-
 
 #define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
 
@@ -254,7 +237,7 @@
 	else
 		mask = 2;
 
-	return !(readl(REALVIEW_SYSMCI) & mask);
+	return readl(REALVIEW_SYSMCI) & mask;
 }
 
 struct mmci_platform_data realview_mmc0_plat_data = {
@@ -274,37 +257,40 @@
 /*
  * Clock handling
  */
-static const struct icst307_params realview_oscvco_params = {
-	.ref		= 24000,
-	.vco_max	= 200000,
+static const struct icst_params realview_oscvco_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST307_VCO_MAX,
+	.vco_min	= ICST307_VCO_MIN,
 	.vd_min		= 4 + 8,
 	.vd_max		= 511 + 8,
 	.rd_min		= 1 + 2,
 	.rd_max		= 127 + 2,
+	.s2div		= icst307_s2div,
+	.idx2s		= icst307_idx2s,
 };
 
-static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
+static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
 {
 	void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
-	void __iomem *sys_osc;
 	u32 val;
 
-	if (machine_is_realview_pb1176())
-		sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
-	else
-		sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
-
-	val = readl(sys_osc) & ~0x7ffff;
+	val = readl(clk->vcoreg) & ~0x7ffff;
 	val |= vco.v | (vco.r << 9) | (vco.s << 16);
 
 	writel(0xa05f, sys_lock);
-	writel(val, sys_osc);
+	writel(val, clk->vcoreg);
 	writel(0, sys_lock);
 }
 
+static const struct clk_ops oscvco_clk_ops = {
+	.round	= icst_clk_round,
+	.set	= icst_clk_set,
+	.setvco	= realview_oscvco_set,
+};
+
 static struct clk oscvco_clk = {
+	.ops	= &oscvco_clk_ops,
 	.params	= &realview_oscvco_params,
-	.setvco = realview_oscvco_set,
 };
 
 /*
@@ -347,7 +333,13 @@
 
 static int __init clk_init(void)
 {
+	if (machine_is_realview_pb1176())
+		oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
+	else
+		oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
 	return 0;
 }
 arch_initcall(clk_init);
@@ -644,133 +636,6 @@
 void __iomem *timer3_va_base;
 
 /*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
-#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)		/* Divide by 16 */
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
-#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
-#else
-#define TIMER_RELOAD	(TIMER_INTERVAL)
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
-#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
-#endif
-
-static void timer_set_mode(enum clock_event_mode mode,
-			   struct clock_event_device *clk)
-{
-	unsigned long ctrl;
-
-	switch(mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD);
-
-		ctrl = TIMER_CTRL_PERIODIC;
-		ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TIMER_CTRL_ONESHOT;
-		ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	writel(ctrl, timer0_va_base + TIMER_CTRL);
-}
-
-static int timer_set_next_event(unsigned long evt,
-				struct clock_event_device *unused)
-{
-	unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL);
-
-	writel(evt, timer0_va_base + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL);
-
-	return 0;
-}
-
-static struct clock_event_device timer0_clockevent =	 {
-	.name		= "timer0",
-	.shift		= 32,
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= timer_set_mode,
-	.set_next_event	= timer_set_next_event,
-	.rating		= 300,
-	.cpumask	= cpu_all_mask,
-};
-
-static void __init realview_clockevents_init(unsigned int timer_irq)
-{
-	timer0_clockevent.irq = timer_irq;
-	timer0_clockevent.mult =
-		div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
-	timer0_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &timer0_clockevent);
-	timer0_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xf, &timer0_clockevent);
-
-	clockevents_register_device(&timer0_clockevent);
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &timer0_clockevent;
-
-	/* clear the interrupt */
-	writel(1, timer0_va_base + TIMER_INTCLR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction realview_timer_irq = {
-	.name		= "RealView Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= realview_timer_interrupt,
-};
-
-static cycle_t realview_get_cycles(struct clocksource *cs)
-{
-	return ~readl(timer3_va_base + TIMER_VALUE);
-}
-
-static struct clocksource clocksource_realview = {
-	.name	= "timer3",
-	.rating	= 200,
-	.read	= realview_get_cycles,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.shift	= 20,
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void __init realview_clocksource_init(void)
-{
-	/* setup timer 0 as free-running clocksource */
-	writel(0, timer3_va_base + TIMER_CTRL);
-	writel(0xffffffff, timer3_va_base + TIMER_LOAD);
-	writel(0xffffffff, timer3_va_base + TIMER_VALUE);
-	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		timer3_va_base + TIMER_CTRL);
-
-	clocksource_realview.mult =
-		clocksource_khz2mult(1000, clocksource_realview.shift);
-	clocksource_register(&clocksource_realview);
-}
-
-/*
  * Set up the clock source and clock events devices
  */
 void __init realview_timer_init(unsigned int timer_irq)
@@ -797,13 +662,8 @@
 	writel(0, timer2_va_base + TIMER_CTRL);
 	writel(0, timer3_va_base + TIMER_CTRL);
 
-	/* 
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(timer_irq, &realview_timer_irq);
-
-	realview_clocksource_init();
-	realview_clockevents_init(timer_irq);
+	sp804_clocksource_init(timer3_va_base);
+	sp804_clockevents_init(timer0_va_base, timer_irq);
 }
 
 /*
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/hotplug.c linux-libre-2.6.35-gnu/arch/arm/mach-realview/hotplug.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/hotplug.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/hotplug.c	2010-08-01 18:11:14.000000000 -0400
@@ -131,7 +131,7 @@
 	cpu_leave_lowpower();
 }
 
-int mach_cpu_disable(unsigned int cpu)
+int platform_cpu_disable(unsigned int cpu)
 {
 	/*
 	 * we don't allow CPU 0 to be shutdown (it is still too special
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/include/mach/barriers.h linux-libre-2.6.35-gnu/arch/arm/mach-realview/include/mach/barriers.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/include/mach/barriers.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/include/mach/barriers.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,8 @@
+/*
+ * Barriers redefined for RealView ARM11MPCore platforms with L220 cache
+ * controller to work around hardware errata causing the outer_sync()
+ * operation to deadlock the system.
+ */
+#define mb()		dsb()
+#define rmb()		dmb()
+#define wmb()		mb()
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/include/mach/clkdev.h linux-libre-2.6.35-gnu/arch/arm/mach-realview/include/mach/clkdev.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/include/mach/clkdev.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/include/mach/clkdev.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,6 +1,15 @@
 #ifndef __ASM_MACH_CLKDEV_H
 #define __ASM_MACH_CLKDEV_H
 
+#include <plat/clock.h>
+
+struct clk {
+	unsigned long		rate;
+	const struct clk_ops	*ops;
+	const struct icst_params *params;
+	void __iomem		*vcoreg;
+};
+
 #define __clk_get(clk) ({ 1; })
 #define __clk_put(clk) do { } while (0)
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/include/mach/irqs-pb1176.h linux-libre-2.6.35-gnu/arch/arm/mach-realview/include/mach/irqs-pb1176.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/include/mach/irqs-pb1176.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/include/mach/irqs-pb1176.h	2010-08-01 18:11:14.000000000 -0400
@@ -31,6 +31,7 @@
 #define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
 #define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
 #define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_CORE_PMU	(IRQ_DC1176_GIC_START + 7)	/* Core PMU interrupt */
 #define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
 #define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
 #define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/include/mach/irqs-pba8.h linux-libre-2.6.35-gnu/arch/arm/mach-realview/include/mach/irqs-pba8.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/include/mach/irqs-pba8.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/include/mach/irqs-pba8.h	2010-08-01 18:11:14.000000000 -0400
@@ -23,12 +23,6 @@
 
 #define IRQ_PBA8_GIC_START			32
 
-/* L220
-#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
-*/
-
 /*
  * PB-A8 on-board gic irq sources
  */
@@ -65,6 +59,8 @@
 #define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
 #define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
 
+#define IRQ_PBA8_PMU		(IRQ_PBA8_GIC_START + 47)	/* Cortex-A8 PMU */
+
 /* ... */
 #define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
 #define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/include/mach/irqs-pbx.h linux-libre-2.6.35-gnu/arch/arm/mach-realview/include/mach/irqs-pbx.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/include/mach/irqs-pbx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/include/mach/irqs-pbx.h	2010-08-01 18:11:14.000000000 -0400
@@ -22,12 +22,6 @@
 
 #define IRQ_PBX_GIC_START			32
 
-/* L220
-#define IRQ_PBX_L220_EVENT	(IRQ_PBX_GIC_START + 29)
-#define IRQ_PBX_L220_SLAVE	(IRQ_PBX_GIC_START + 30)
-#define IRQ_PBX_L220_DECODE	(IRQ_PBX_GIC_START + 31)
-*/
-
 /*
  * PBX on-board gic irq sources
  */
@@ -77,10 +71,10 @@
 #define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
 #define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
 /* ... */
-#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
-#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 45)
-#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 46)
-#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 47)
+#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 47)
 
 /* ... */
 #define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/include/mach/platform.h linux-libre-2.6.35-gnu/arch/arm/mach-realview/include/mach/platform.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/include/mach/platform.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/include/mach/platform.h	2010-08-01 18:11:14.000000000 -0400
@@ -231,12 +231,6 @@
 #define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
 #define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
 
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      REALVIEW_BOOT_ROM_HI
-
 /*
  * System controller bit assignment
  */
@@ -249,20 +243,6 @@
 #define REALVIEW_TIMER4_EnSel	21
 
 
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
 #define REALVIEW_CSR_BASE             0x10000000
 #define REALVIEW_CSR_SIZE             0x10000000
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-realview/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -18,6 +18,7 @@
 	bool "Support ARM11MPCore tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V6
+	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Enable support for the ARM11MPCore tile on the Realview platform.
 
@@ -35,6 +36,7 @@
 	select CPU_V6
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
+	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Include support for the ARM(R) RealView MPCore Platform Baseboard.
 	  PB11MPCore is a platform with an on-board ARM11MPCore and has
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-realview/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y					:= core.o clock.o
+obj-y					:= core.o
 obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/realview_eb.c linux-libre-2.6.35-gnu/arch/arm/mach-realview/realview_eb.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/realview_eb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/realview_eb.c	2010-08-01 18:11:14.000000000 -0400
@@ -31,8 +31,9 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
 
@@ -44,7 +45,6 @@
 #include <mach/irqs.h>
 
 #include "core.h"
-#include "clock.h"
 
 static struct map_desc realview_eb_io_desc[] __initdata = {
 	{
@@ -294,6 +294,36 @@
 	},
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start		= IRQ_EB11MP_PMU_CPU0,
+		.end		= IRQ_EB11MP_PMU_CPU0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start		= IRQ_EB11MP_PMU_CPU1,
+		.end		= IRQ_EB11MP_PMU_CPU1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= IRQ_EB11MP_PMU_CPU2,
+		.end		= IRQ_EB11MP_PMU_CPU2,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start		= IRQ_EB11MP_PMU_CPU3,
+		.end		= IRQ_EB11MP_PMU_CPU3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= ARRAY_SIZE(pmu_resources),
+	.resource		= pmu_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	if (core_tile_eb11mp() || core_tile_a9mp()) {
@@ -407,6 +437,7 @@
 		 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
 		l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
 #endif
+		platform_device_register(&pmu_device);
 	}
 
 	realview_flash_register(&realview_eb_flash_resource, 1);
@@ -427,7 +458,7 @@
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_EB_UART0_BASE,
+	.phys_io	= REALVIEW_EB_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/realview_pb1176.c linux-libre-2.6.35-gnu/arch/arm/mach-realview/realview_pb1176.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/realview_pb1176.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/realview_pb1176.c	2010-08-01 18:11:14.000000000 -0400
@@ -31,8 +31,9 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
@@ -44,7 +45,6 @@
 #include <mach/irqs.h>
 
 #include "core.h"
-#include "clock.h"
 
 static struct map_desc realview_pb1176_io_desc[] __initdata = {
 	{
@@ -263,6 +263,19 @@
 	},
 };
 
+static struct resource pmu_resource = {
+	.start		= IRQ_DC1176_CORE_PMU,
+	.end		= IRQ_DC1176_CORE_PMU,
+	.flags		= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= 1,
+	.resource		= &pmu_resource,
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM1176 DevChip GIC, primary */
@@ -324,6 +337,7 @@
 	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	realview_usb_register(realview_pb1176_isp1761_resources);
+	platform_device_register(&pmu_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
@@ -338,7 +352,7 @@
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB1176_UART0_BASE,
+	.phys_io	= REALVIEW_PB1176_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pb1176_fixup,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/realview_pb11mp.c linux-libre-2.6.35-gnu/arch/arm/mach-realview/realview_pb11mp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/realview_pb11mp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/realview_pb11mp.c	2010-08-01 18:11:14.000000000 -0400
@@ -31,8 +31,9 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
 
@@ -45,7 +46,6 @@
 #include <mach/irqs.h>
 
 #include "core.h"
-#include "clock.h"
 
 static struct map_desc realview_pb11mp_io_desc[] __initdata = {
 	{
@@ -260,6 +260,36 @@
 	},
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start		= IRQ_TC11MP_PMU_CPU0,
+		.end		= IRQ_TC11MP_PMU_CPU0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start		= IRQ_TC11MP_PMU_CPU1,
+		.end		= IRQ_TC11MP_PMU_CPU1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= IRQ_TC11MP_PMU_CPU2,
+		.end		= IRQ_TC11MP_PMU_CPU2,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start		= IRQ_TC11MP_PMU_CPU3,
+		.end		= IRQ_TC11MP_PMU_CPU3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= ARRAY_SIZE(pmu_resources),
+	.resource		= pmu_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	unsigned int pldctrl;
@@ -329,6 +359,7 @@
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&realview_cf_device);
 	realview_usb_register(realview_pb11mp_isp1761_resources);
+	platform_device_register(&pmu_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
@@ -343,7 +374,7 @@
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PB11MP_UART0_BASE,
+	.phys_io	= REALVIEW_PB11MP_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/realview_pba8.c linux-libre-2.6.35-gnu/arch/arm/mach-realview/realview_pba8.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/realview_pba8.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/realview_pba8.c	2010-08-01 18:11:14.000000000 -0400
@@ -30,8 +30,9 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,7 +43,6 @@
 #include <mach/irqs.h>
 
 #include "core.h"
-#include "clock.h"
 
 static struct map_desc realview_pba8_io_desc[] __initdata = {
 	{
@@ -250,6 +250,19 @@
 	},
 };
 
+static struct resource pmu_resource = {
+	.start		= IRQ_PBA8_PMU,
+	.end		= IRQ_PBA8_PMU,
+	.flags		= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= 1,
+	.resource		= &pmu_resource,
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM PB-A8 on-board GIC */
@@ -296,6 +309,7 @@
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&realview_cf_device);
 	realview_usb_register(realview_pba8_isp1761_resources);
+	platform_device_register(&pmu_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
@@ -310,7 +324,7 @@
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBA8_UART0_BASE,
+	.phys_io	= REALVIEW_PBA8_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_fixup,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-realview/realview_pbx.c linux-libre-2.6.35-gnu/arch/arm/mach-realview/realview_pbx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-realview/realview_pbx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-realview/realview_pbx.c	2010-08-01 18:11:14.000000000 -0400
@@ -29,7 +29,9 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
 #include <asm/smp_twd.h>
+#include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
@@ -270,6 +272,36 @@
 	},
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start		= IRQ_PBX_PMU_CPU0,
+		.end		= IRQ_PBX_PMU_CPU0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start		= IRQ_PBX_PMU_CPU1,
+		.end		= IRQ_PBX_PMU_CPU1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= IRQ_PBX_PMU_CPU2,
+		.end		= IRQ_PBX_PMU_CPU2,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start		= IRQ_PBX_PMU_CPU3,
+		.end		= IRQ_PBX_PMU_CPU3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= ARRAY_SIZE(pmu_resources),
+	.resource		= pmu_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM PBX on-board GIC */
@@ -354,6 +386,7 @@
 		/* 16KB way size, 8-way associativity, parity disabled
 		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
 		l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
+		platform_device_register(&pmu_device);
 	}
 #endif
 
@@ -377,7 +410,7 @@
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_PBX_UART0_BASE,
+	.phys_io	= REALVIEW_PBX_UART0_BASE & SECTION_MASK,
 	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.fixup		= realview_pbx_fixup,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/h1940-bluetooth.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/h1940-bluetooth.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/h1940-bluetooth.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/h1940-bluetooth.c	2010-08-01 18:11:14.000000000 -0400
@@ -33,14 +33,15 @@
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
+
+		gpio_set_value(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
+		gpio_set_value(S3C2410_GPH(1), 0);
 	}
 	else {
-		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
+		gpio_set_value(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
+		gpio_set_value(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
 	}
@@ -61,15 +62,21 @@
 	struct rfkill *rfk;
 	int ret = 0;
 
+	ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev));
+	if (ret) {
+		dev_err(&pdev->dev, "could not get GPH1\n");\
+		return ret;
+	}
+
 	/* Configures BT serial port GPIOs */
-	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
-	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
+	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+	s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+	s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+	s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
 
 
 	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
@@ -100,6 +107,7 @@
 	struct rfkill *rfk = platform_get_drvdata(pdev);
 
 	platform_set_drvdata(pdev, NULL);
+	gpio_free(S3C2410_GPH(1));
 
 	if (rfk) {
 		rfkill_unregister(rfk);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/dma.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/dma.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/dma.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/dma.h	2010-08-01 18:11:14.000000000 -0400
@@ -54,7 +54,7 @@
 #define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
 
 /* we have 4 dma channels */
-#ifndef CONFIG_CPU_S3C2443
+#if !defined(CONFIG_CPU_S3C2443) && !defined(CONFIG_CPU_S3C2416)
 #define S3C_DMA_CHANNELS		(4)
 #else
 #define S3C_DMA_CHANNELS		(6)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/gpio-fns.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/gpio-fns.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/gpio-fns.h	2010-08-01 18:11:14.000000000 -0400
@@ -10,14 +10,28 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __MACH_GPIO_FNS_H
+#define __MACH_GPIO_FNS_H __FILE__
+
 /* These functions are in the to-be-removed category and it is strongly
  * encouraged not to use these in new code. They will be marked deprecated
  * very soon.
  *
  * Most of the functionality can be either replaced by the gpiocfg calls
  * for the s3c platform or by the generic GPIOlib API.
+ *
+ * As of 2.6.35-rc, these will be removed, with the few drivers using them
+ * either replaced or given a wrapper until the calls can be removed.
 */
 
+#include <plat/gpio-cfg.h>
+
+static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg)
+{
+	/* 1:1 mapping between cfgpin and setcfg calls at the moment */
+	s3c_gpio_cfgpin(pin, cfg);
+}
+
 /* external functions for GPIO support
  *
  * These allow various different clients to access the same GPIO
@@ -25,17 +39,6 @@
  * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
 */
 
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- *    s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
- *    s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
 extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
 
 /* s3c2410_gpio_getirq
@@ -73,6 +76,14 @@
 
 /* s3c2410_gpio_pullup
  *
+ * This call should be replaced with s3c_gpio_setpull().
+ *
+ * As a note, there is currently no distinction between pull-up and pull-down
+ * in the s3c24xx series devices with only an on/off configuration.
+ */
+
+/* s3c2410_gpio_pullup
+ *
  * configure the pull-up control on the given pin
  *
  * to = 1 => disable the pull-up
@@ -86,18 +97,8 @@
 
 extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
 
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- *	< 0 => error code
- *	  0 => enabled
- *	  1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
 extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
 
 extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+#endif /* __MACH_GPIO_FNS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -20,10 +20,18 @@
  * devices that need GPIO.
  */
 
+#ifdef CONFIG_CPU_S3C244X
+#define ARCH_NR_GPIOS	(32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
+#else
 #define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
+#endif
 
 #include <asm-generic/gpio.h>
 #include <mach/gpio-nrs.h>
 #include <mach/gpio-fns.h>
 
+#ifdef CONFIG_CPU_S3C24XX
+#define S3C_GPIO_END	(S3C2410_GPIO_BANKJ + 32)
+#else
 #define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h	2010-08-01 18:11:14.000000000 -0400
@@ -16,15 +16,28 @@
 
 #define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
 
-#define S3C2410_GPIO_BANKA   (32*0)
-#define S3C2410_GPIO_BANKB   (32*1)
-#define S3C2410_GPIO_BANKC   (32*2)
-#define S3C2410_GPIO_BANKD   (32*3)
-#define S3C2410_GPIO_BANKE   (32*4)
-#define S3C2410_GPIO_BANKF   (32*5)
 #define S3C2410_GPIO_BANKG   (32*6)
 #define S3C2410_GPIO_BANKH   (32*7)
 
+/* GPIO sizes for various SoCs:
+ *
+ *             2442
+ *   2410 2412 2440 2443 2416
+ *   ---- ---- ---- ---- ----
+ * A 23   22   25   16   25
+ * B 11   11   11   11   9
+ * C 16   15   16   16   16
+ * D 16   16   16   16   16
+ * E 16   16   16   16   16
+ * F 8    8    8    8    8
+ * G 16   16   16   16   8
+ * H 11   11   9    15   15
+ * J --   --   13   16   --
+ * K --   --   --   --   16
+ * L --   --   --   15   7
+ * M --   --   --   2    2
+ */
+
 /* GPIO bank sizes */
 #define S3C2410_GPIO_A_NR	(32)
 #define S3C2410_GPIO_B_NR	(32)
@@ -34,6 +47,10 @@
 #define S3C2410_GPIO_F_NR	(32)
 #define S3C2410_GPIO_G_NR	(32)
 #define S3C2410_GPIO_H_NR	(32)
+#define S3C2410_GPIO_J_NR	(32)	/* technically 16. */
+#define S3C2410_GPIO_K_NR	(32)	/* technically 16. */
+#define S3C2410_GPIO_L_NR	(32)	/* technically 15. */
+#define S3C2410_GPIO_M_NR	(32)	/* technically 2. */
 
 #if CONFIG_S3C_GPIO_SPACE != 0
 #error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
@@ -53,6 +70,10 @@
 	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
 	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
 	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+	S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
+	S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
+	S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
+	S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
 };
 
 #endif /* __ASSEMBLY__ */
@@ -67,6 +88,10 @@
 #define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
 #define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
 #define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
+#define S3C2410_GPJ(_nr)	(S3C2410_GPIO_J_START + (_nr))
+#define S3C2410_GPK(_nr)	(S3C2410_GPIO_K_START + (_nr))
+#define S3C2410_GPL(_nr)	(S3C2410_GPIO_L_START + (_nr))
+#define S3C2410_GPM(_nr)	(S3C2410_GPIO_M_START + (_nr))
 
 /* compatibility until drivers can be modified */
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/gpio-track.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/gpio-track.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/gpio-track.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/gpio-track.h	2010-08-01 18:11:14.000000000 -0400
@@ -23,11 +23,11 @@
 {
 	struct s3c_gpio_chip *chip;
 
-	if (pin > S3C2410_GPG(10))
+	if (pin > S3C_GPIO_END)
 		return NULL;
 
 	chip = &s3c24xx_gpios[pin/32];
-	return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL;
+	return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
 }
 
 #endif /* __ASM_ARCH_GPIO_CORE_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -115,6 +115,26 @@
 #define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
 #define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
 
+
+#define IRQ_S3C2416_EINT8t15	S3C2410_IRQ(5)
+#define IRQ_S3C2416_DMA		S3C2410_IRQ(17)
+#define IRQ_S3C2416_UART3	S3C2410_IRQ(18)
+#define IRQ_S3C2416_SDI1	S3C2410_IRQ(20)
+#define IRQ_S3C2416_SDI0	S3C2410_IRQ(21)
+
+#define IRQ_S3C2416_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2416_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2416_LCD4	S3C2410_IRQSUB(17)
+#define IRQ_S3C2416_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2416_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2416_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2416_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2416_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2416_DMA5	S3C2410_IRQSUB(23)
+#define IRQ_S32416_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S32416_AC97		S3C2410_IRQSUB(28)
+
+
 /* extra irqs for s3c2440 */
 
 #define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
@@ -130,7 +150,10 @@
 #define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
 #define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
 
+#define IRQ_S3C2416_HSMMC0	S3C2410_IRQ(21)		/* S3C2416/S3C2450 */
+
 #define IRQ_HSMMC0		IRQ_S3C2443_HSMMC
+#define IRQ_HSMMC1		IRQ_S3C2416_HSMMC0
 
 #define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
 #define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
@@ -152,7 +175,7 @@
 #define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
 #define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
 
-#ifdef CONFIG_CPU_S3C2443
+#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
 #define NR_IRQS (IRQ_S3C2443_AC97+1)
 #else
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
@@ -164,6 +187,9 @@
 #define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
 #define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
 
+#define IRQ_LCD_VSYNC		IRQ_S3C2443_LCD3
+#define IRQ_LCD_SYSTEM		IRQ_S3C2443_LCD2
+
 #ifdef CONFIG_CPU_S3C2440
 #define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
 #else
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/map.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/map.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/map.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/map.h	2010-08-01 18:11:14.000000000 -0400
@@ -63,9 +63,11 @@
 #define S3C2440_PA_AC97	   (0x5B000000)
 #define S3C2440_SZ_AC97	   SZ_1M
 
-/* S3C2443 High-speed SD/MMC */
+/* S3C2443/S3C2416 High-speed SD/MMC */
 #define S3C2443_PA_HSMMC   (0x4A800000)
-#define S3C2443_SZ_HSMMC   (256)
+#define S3C2416_PA_HSMMC0  (0x4AC00000)
+
+#define	S3C2443_PA_FB	(0x4C800000)
 
 /* S3C2412 memory and IO controls */
 #define S3C2412_PA_SSMC	(0x4F000000)
@@ -106,10 +108,13 @@
 #define S3C24XX_PA_SDI      S3C2410_PA_SDI
 #define S3C24XX_PA_NAND	    S3C2410_PA_NAND
 
+#define S3C_PA_FB	    S3C2443_PA_FB
 #define S3C_PA_IIC          S3C2410_PA_IIC
 #define S3C_PA_UART	    S3C24XX_PA_UART
 #define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
+#define S3C_PA_HSMMC1	    S3C2416_PA_HSMMC0
+#define S3C_PA_WDT	    S3C2410_PA_WATCHDOG
 #define S3C_PA_NAND	    S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_MAP_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-clock.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -161,4 +161,6 @@
 
 #endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
 
+#define S3C2416_CLKDIV2		S3C2410_CLKREG(0x28)
+
 #endif /* __ASM_ARM_REGS_CLOCK */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-dsc.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-dsc.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-dsc.h	2010-08-01 18:11:14.000000000 -0400
@@ -19,6 +19,42 @@
 #define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
 #endif
 
+#if defined(CONFIG_CPU_S3C2416)
+#define S3C2416_DSC0	   S3C2410_GPIOREG(0xc0)
+#define S3C2416_DSC1	   S3C2410_GPIOREG(0xc4)
+#define S3C2416_DSC2	   S3C2410_GPIOREG(0xc8)
+#define S3C2416_DSC3	   S3C2410_GPIOREG(0x110)
+
+#define S3C2416_SELECT_DSC0	(0 << 30)
+#define S3C2416_SELECT_DSC1	(1 << 30)
+#define S3C2416_SELECT_DSC2	(2 << 30)
+#define S3C2416_SELECT_DSC3	(3 << 30)
+
+#define S3C2416_DSC_GETSHIFT(x)	(x & 30)
+
+#define S3C2416_DSC0_CF		(S3C2416_SELECT_DSC0 | 28)
+#define	S3C2416_DSC0_CF_5mA	(0 << 28)
+#define	S3C2416_DSC0_CF_10mA	(1 << 28)
+#define	S3C2416_DSC0_CF_15mA	(2 << 28)
+#define	S3C2416_DSC0_CF_21mA	(3 << 28)
+#define	S3C2416_DSC0_CF_MASK	(3 << 28)
+
+#define S3C2416_DSC0_nRBE	(S3C2416_SELECT_DSC0 | 26)
+#define	S3C2416_DSC0_nRBE_5mA	(0 << 26)
+#define	S3C2416_DSC0_nRBE_10mA	(1 << 26)
+#define	S3C2416_DSC0_nRBE_15mA	(2 << 26)
+#define	S3C2416_DSC0_nRBE_21mA	(3 << 26)
+#define	S3C2416_DSC0_nRBE_MASK	(3 << 26)
+
+#define S3C2416_DSC0_nROE	(S3C2416_SELECT_DSC0 | 24)
+#define	S3C2416_DSC0_nROE_5mA	(0 << 24)
+#define	S3C2416_DSC0_nROE_10mA	(1 << 24)
+#define	S3C2416_DSC0_nROE_15mA	(2 << 24)
+#define	S3C2416_DSC0_nROE_21mA	(3 << 24)
+#define	S3C2416_DSC0_nROE_MASK	(3 << 24)
+
+#endif
+
 #if defined(CONFIG_CPU_S3C244X)
 
 #define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -17,29 +17,11 @@
 #include <mach/gpio-nrs.h>
 
 #ifdef CONFIG_CPU_S3C2400
-#define S3C24XX_GPIO_BASE(x)  S3C2400_GPIO_BASE(x)
-#define S3C24XX_MISCCR        S3C2400_MISCCR
+#define S3C24XX_MISCCR		S3C2400_MISCCR
 #else
-#define S3C24XX_GPIO_BASE(x)  S3C2410_GPIO_BASE(x)
-#define S3C24XX_MISCCR	      S3C24XX_GPIOREG2(0x80)
+#define S3C24XX_MISCCR		S3C24XX_GPIOREG2(0x80)
 #endif /* CONFIG_CPU_S3C2400 */
 
-
-/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
-
-#define S3C2400_BANKNUM(pin)     (((pin) & ~31) / 32)
-#define S3C2400_BASEA2B(pin)     ((((pin) & ~31) >> 2))
-#define S3C2400_BASEC2H(pin)     ((S3C2400_BANKNUM(pin) * 10) + \
-                                 (2 * (S3C2400_BANKNUM(pin)-2)))
-
-#define S3C2400_GPIO_BASE(pin)   (pin < S3C2410_GPIO_BANKC ? \
-                                 S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
-                                 S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
-
-
-#define S3C2410_GPIO_BASE(pin)   ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
-#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
-
 /* general configuration options */
 
 #define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
@@ -610,35 +592,73 @@
 #define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
 
 #define S3C2410_GPH0_nCTS0  (0x02 << 0)
+#define S3C2416_GPH0_TXD0  (0x02 << 0)
 
 #define S3C2410_GPH1_nRTS0  (0x02 << 2)
+#define S3C2416_GPH1_RXD0  (0x02 << 2)
 
 #define S3C2410_GPH2_TXD0   (0x02 << 4)
+#define S3C2416_GPH2_TXD1   (0x02 << 4)
 
 #define S3C2410_GPH3_RXD0   (0x02 << 6)
+#define S3C2416_GPH3_RXD1   (0x02 << 6)
 
 #define S3C2410_GPH4_TXD1   (0x02 << 8)
+#define S3C2416_GPH4_TXD2   (0x02 << 8)
 
 #define S3C2410_GPH5_RXD1   (0x02 << 10)
+#define S3C2416_GPH5_RXD2   (0x02 << 10)
 
 #define S3C2410_GPH6_TXD2   (0x02 << 12)
+#define S3C2416_GPH6_TXD3   (0x02 << 12)
 #define S3C2410_GPH6_nRTS1  (0x03 << 12)
+#define S3C2416_GPH6_nRTS2  (0x03 << 12)
 
 #define S3C2410_GPH7_RXD2   (0x02 << 14)
+#define S3C2416_GPH7_RXD3   (0x02 << 14)
 #define S3C2410_GPH7_nCTS1  (0x03 << 14)
+#define S3C2416_GPH7_nCTS2  (0x03 << 14)
 
 #define S3C2410_GPH8_UCLK   (0x02 << 16)
+#define S3C2416_GPH8_nCTS0  (0x02 << 16)
 
 #define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
 #define S3C2442_GPH9_nSPICS0  (0x03 << 18)
+#define S3C2416_GPH9_nRTS0    (0x02 << 18)
 
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+#define S3C2416_GPH10_nCTS1   (0x02 << 20)
+
+#define S3C2416_GPH11_nRTS1   (0x02 << 22)
+
+#define S3C2416_GPH12_EXTUARTCLK (0x02 << 24)
+
+#define S3C2416_GPH13_CLKOUT0 (0x02 << 26)
+
+#define S3C2416_GPH14_CLKOUT1 (0x02 << 28)
 
 /* The S3C2412 and S3C2413 move the GPJ register set to after
  * GPH, which means all registers after 0x80 are now offset by 0x10
  * for the 2412/2413 from the 2410/2440/2442
 */
 
+/* S3C2443 and above */
+#define S3C2440_GPJCON	   S3C2410_GPIOREG(0xD0)
+#define S3C2440_GPJDAT	   S3C2410_GPIOREG(0xD4)
+#define S3C2440_GPJUP	   S3C2410_GPIOREG(0xD8)
+
+#define S3C2443_GPKCON	   S3C2410_GPIOREG(0xE0)
+#define S3C2443_GPKDAT	   S3C2410_GPIOREG(0xE4)
+#define S3C2443_GPKUP	   S3C2410_GPIOREG(0xE8)
+
+#define S3C2443_GPLCON	   S3C2410_GPIOREG(0xF0)
+#define S3C2443_GPLDAT	   S3C2410_GPIOREG(0xF4)
+#define S3C2443_GPLUP	   S3C2410_GPIOREG(0xF8)
+
+#define S3C2443_GPMCON	   S3C2410_GPIOREG(0x100)
+#define S3C2443_GPMDAT	   S3C2410_GPIOREG(0x104)
+#define S3C2443_GPMUP	   S3C2410_GPIOREG(0x108)
+
 /* miscellaneous control */
 #define S3C2400_MISCCR	   S3C2410_GPIOREG(0x54)
 #define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
@@ -686,6 +706,7 @@
 #define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
 
 #define S3C2410_MISCCR_USBSUSPND0   (1<<12)
+#define S3C2416_MISCCR_SEL_SUSPND   (1<<12)
 #define S3C2410_MISCCR_USBSUSPND1   (1<<13)
 
 #define S3C2410_MISCCR_nRSTCON	    (1<<16)
@@ -695,6 +716,9 @@
 #define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
 #define S3C2410_MISCCR_SDSLEEP	    (7<<17)
 
+#define S3C2416_MISCCR_FLT_I2C      (1<<24)
+#define S3C2416_MISCCR_HSSPI_EN2    (1<<31)
+
 /* external interrupt control... */
 /* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
  * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
@@ -762,8 +786,11 @@
 #define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
 #define S3C2410_GSTATUS1_2410	   (0x32410000)
 #define S3C2410_GSTATUS1_2412	   (0x32412001)
+#define S3C2410_GSTATUS1_2416	   (0x32416003)
 #define S3C2410_GSTATUS1_2440	   (0x32440000)
 #define S3C2410_GSTATUS1_2442	   (0x32440aaa)
+/* some 2416 CPUs report this value also */
+#define S3C2410_GSTATUS1_2450	   (0x32450003)
 
 #define S3C2410_GSTATUS2_WTRESET   (1<<2)
 #define S3C2410_GSTATUS2_OFFRESET  (1<<1)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h	2010-08-01 18:11:14.000000000 -0400
@@ -22,85 +22,49 @@
  * pull up works like all other ports.
 */
 
-#define S3C2440_GPIO_BANKJ  (416)
-
-#define S3C2440_GPJCON	    S3C2410_GPIOREG(0xd0)
-#define S3C2440_GPJDAT	    S3C2410_GPIOREG(0xd4)
-#define S3C2440_GPJUP	    S3C2410_GPIOREG(0xd8)
-
 #define S3C2413_GPJCON		S3C2410_GPIOREG(0x80)
 #define S3C2413_GPJDAT		S3C2410_GPIOREG(0x84)
 #define S3C2413_GPJUP		S3C2410_GPIOREG(0x88)
 #define S3C2413_GPJSLPCON	S3C2410_GPIOREG(0x8C)
 
-#define S3C2440_GPJ0            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
-#define S3C2440_GPJ0_INP        (0x00 << 0)
 #define S3C2440_GPJ0_OUTP       (0x01 << 0)
 #define S3C2440_GPJ0_CAMDATA0   (0x02 << 0)
 
-#define S3C2440_GPJ1            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1)
-#define S3C2440_GPJ1_INP        (0x00 << 2)
 #define S3C2440_GPJ1_OUTP       (0x01 << 2)
 #define S3C2440_GPJ1_CAMDATA1   (0x02 << 2)
 
-#define S3C2440_GPJ2            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2)
-#define S3C2440_GPJ2_INP        (0x00 << 4)
 #define S3C2440_GPJ2_OUTP       (0x01 << 4)
 #define S3C2440_GPJ2_CAMDATA2   (0x02 << 4)
 
-#define S3C2440_GPJ3            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3)
-#define S3C2440_GPJ3_INP        (0x00 << 6)
 #define S3C2440_GPJ3_OUTP       (0x01 << 6)
 #define S3C2440_GPJ3_CAMDATA3   (0x02 << 6)
 
-#define S3C2440_GPJ4            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4)
-#define S3C2440_GPJ4_INP        (0x00 << 8)
 #define S3C2440_GPJ4_OUTP       (0x01 << 8)
 #define S3C2440_GPJ4_CAMDATA4   (0x02 << 8)
 
-#define S3C2440_GPJ5            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5)
-#define S3C2440_GPJ5_INP        (0x00 << 10)
 #define S3C2440_GPJ5_OUTP       (0x01 << 10)
 #define S3C2440_GPJ5_CAMDATA5   (0x02 << 10)
 
-#define S3C2440_GPJ6            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6)
-#define S3C2440_GPJ6_INP        (0x00 << 12)
 #define S3C2440_GPJ6_OUTP       (0x01 << 12)
 #define S3C2440_GPJ6_CAMDATA6   (0x02 << 12)
 
-#define S3C2440_GPJ7            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7)
-#define S3C2440_GPJ7_INP        (0x00 << 14)
 #define S3C2440_GPJ7_OUTP       (0x01 << 14)
 #define S3C2440_GPJ7_CAMDATA7   (0x02 << 14)
 
-#define S3C2440_GPJ8            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8)
-#define S3C2440_GPJ8_INP        (0x00 << 16)
 #define S3C2440_GPJ8_OUTP       (0x01 << 16)
 #define S3C2440_GPJ8_CAMPCLK    (0x02 << 16)
 
-#define S3C2440_GPJ9            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9)
-#define S3C2440_GPJ9_INP        (0x00 << 18)
 #define S3C2440_GPJ9_OUTP       (0x01 << 18)
 #define S3C2440_GPJ9_CAMVSYNC   (0x02 << 18)
 
-#define S3C2440_GPJ10           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10)
-#define S3C2440_GPJ10_INP       (0x00 << 20)
 #define S3C2440_GPJ10_OUTP      (0x01 << 20)
 #define S3C2440_GPJ10_CAMHREF   (0x02 << 20)
 
-#define S3C2440_GPJ11           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11)
-#define S3C2440_GPJ11_INP       (0x00 << 22)
 #define S3C2440_GPJ11_OUTP      (0x01 << 22)
 #define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
 
-#define S3C2440_GPJ12           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12)
-#define S3C2440_GPJ12_INP       (0x00 << 24)
 #define S3C2440_GPJ12_OUTP      (0x01 << 24)
 #define S3C2440_GPJ12_CAMRESET  (0x02 << 24)
 
-#define S3C2443_GPJ13		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13)
-#define S3C2443_GPJ14		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14)
-#define S3C2443_GPJ15		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15)
-
 #endif	/* __ASM_ARCH_REGS_GPIOJ_H */
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-irq.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-irq.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-irq.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-irq.h	2010-08-01 18:11:14.000000000 -0400
@@ -27,6 +27,16 @@
 #define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
 #define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
 
+#define S3C2416_PRIORITY_MODE1		S3C2410_IRQREG(0x030)
+#define S3C2416_PRIORITY_UPDATE1	S3C2410_IRQREG(0x034)
+#define S3C2416_SRCPND2			S3C2410_IRQREG(0x040)
+#define S3C2416_INTMOD2			S3C2410_IRQREG(0x044)
+#define S3C2416_INTMSK2			S3C2410_IRQREG(0x048)
+#define S3C2416_INTPND2			S3C2410_IRQREG(0x050)
+#define S3C2416_INTOFFSET2		S3C2410_IRQREG(0x054)
+#define S3C2416_PRIORITY_MODE2		S3C2410_IRQREG(0x070)
+#define S3C2416_PRIORITY_UPDATE2	S3C2410_IRQREG(0x074)
+
 /* mask: 0=enable, 1=disable
  * 1 bit EINT, 4=EINT4, 23=EINT23
  * EINT0,1,2,3 are not handled here.
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2416 specific register definitions
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2416_H
+#define __ASM_ARCH_REGS_S3C2416_H "s3c2416"
+
+#define S3C2416_SWRST		(S3C24XX_VA_CLKPWR + 0x44)
+#define S3C2416_SWRST_RESET	(0x533C2416)
+
+/* see regs-power.h for the other registers in the power block. */
+
+#endif	/* __ASM_ARCH_REGS_S3C2416_H */
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,30 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2416 memory register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2416_MEM
+#define __ASM_ARM_REGS_S3C2416_MEM
+
+#ifndef S3C2416_MEMREG
+#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+#define S3C2416_BANKCFG			S3C2416_MEMREG(0x00)
+#define S3C2416_BANKCON1		S3C2416_MEMREG(0x04)
+#define S3C2416_BANKCON2		S3C2416_MEMREG(0x08)
+#define S3C2416_BANKCON3		S3C2416_MEMREG(0x0C)
+
+#define S3C2416_REFRESH			S3C2416_MEMREG(0x10)
+#define S3C2416_TIMEOUT			S3C2416_MEMREG(0x14)
+
+#endif /*  __ASM_ARM_REGS_S3C2416_MEM */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -83,8 +83,7 @@
 #define S3C2443_HCLKCON_DMA4		(1<<4)
 #define S3C2443_HCLKCON_DMA5		(1<<5)
 #define S3C2443_HCLKCON_CAMIF		(1<<8)
-#define S3C2443_HCLKCON_DISP		(1<<9)
-#define S3C2443_HCLKCON_LCDC		(1<<10)
+#define S3C2443_HCLKCON_LCDC		(1<<9)
 #define S3C2443_HCLKCON_USBH		(1<<11)
 #define S3C2443_HCLKCON_USBD		(1<<12)
 #define S3C2443_HCLKCON_HSMMC		(1<<16)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/ts.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/ts.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/ts.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/ts.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,21 +0,0 @@
-/* linux/include/asm/arch-s3c2410/ts.h
- *
- * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_TS_H
-#define __ASM_ARM_TS_H
-
-struct s3c2410_ts_mach_info {
-       int             delay;
-       int             presc;
-       int             oversampling_shift;
-};
-
-extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
-
-#endif /* __ASM_ARM_TS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/uncompress.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/uncompress.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/include/mach/uncompress.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/include/mach/uncompress.h	2010-08-01 18:11:14.000000000 -0400
@@ -40,7 +40,9 @@
 	cpuid &= S3C2410_GSTATUS1_IDMASK;
 
 	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
-	    cpuid == S3C2410_GSTATUS1_2442) {
+	    cpuid == S3C2410_GSTATUS1_2442 ||
+	    cpuid == S3C2410_GSTATUS1_2416 ||
+	    cpuid == S3C2410_GSTATUS1_2450) {
 		fifo_mask = S3C2440_UFSTAT_TXMASK;
 		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
 	} else {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -6,6 +6,7 @@
 	bool
 	depends on ARCH_S3C2410
 	select CPU_ARM920T
+	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
@@ -76,6 +77,7 @@
 	select PM_H1940 if PM
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C2410_SETUP_TS
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -95,12 +97,19 @@
 config MACH_N30
 	bool "Acer N30 family"
 	select CPU_S3C2410
+	select MACH_N35
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
 
+config MACH_N35
+	bool
+	help
+	  Internal node in order to enable support for Acer N35 if Acer N30 is
+	  selected.
+
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
@@ -110,6 +119,7 @@
 	select MACH_BAST_IDE
 	select S3C24XX_DCLK
 	select ISA
+	select S3C_DEV_HWMON
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
 	help
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/mach-amlm5900.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/mach-amlm5900.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/mach-amlm5900.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/mach-amlm5900.c	2010-08-01 18:11:14.000000000 -0400
@@ -56,6 +56,7 @@
 #include <plat/iic.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/gpio-cfg.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 
@@ -225,8 +226,8 @@
 	} else {
 		enable_irq_wake(IRQ_EINT9);
 		/* configure the suspend/resume status pin */
-		s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
-		s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
+		s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+		s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP);
 	}
 }
 static void __init amlm5900_init(void)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/mach-bast.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/mach-bast.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/mach-bast.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/mach-bast.c	2010-08-01 18:11:14.000000000 -0400
@@ -61,6 +61,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
+#include <plat/gpio-cfg.h>
 #include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
@@ -216,15 +217,13 @@
 static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
 {
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
-
+	gpio_direction_output(S3C2410_GPA(21), 1);
 	return 0;
 }
 
 static int bast_pm_resume(struct sys_device *sd)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 	return 0;
 }
 
@@ -634,7 +633,7 @@
 
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
-	s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
+	s3c_hwmon_set_platdata(&bast_hwmon_info);
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
@@ -658,6 +657,8 @@
 	nor_simtec_init();
 	simtec_audio_add(NULL, true, &bast_audio);
 
+	WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset"));
+	
 	s3c_cpufreq_setboard(&bast_cpufreq);
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/mach-h1940.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/mach-h1940.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/mach-h1940.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/mach-h1940.c	2010-08-01 18:11:14.000000000 -0400
@@ -46,16 +46,17 @@
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
-#include <mach/ts.h>
 #include <plat/udc.h>
 #include <plat/iic.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
 #include <plat/mci.h>
+#include <plat/ts.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
 	[0] = {
@@ -145,6 +146,7 @@
 		.delay = 10000,
 		.presc = 49,
 		.oversampling_shift = 2,
+		.cfg_gpio = s3c24xx_ts_cfg_gpio,
 };
 
 /**
@@ -162,8 +164,8 @@
 	.xres =		240,
 	.yres =		320,
 	.bpp =		16,
-	.left_margin =	20,
-	.right_margin =	8,
+	.left_margin =	8,
+	.right_margin =	20,
 	.hsync_len =	4,
 	.upper_margin =	8,
 	.lower_margin = 7,
@@ -207,16 +209,16 @@
 {
 	gpio_request(S3C2410_GPB(0), "Backlight");
 
-	s3c2410_gpio_setpin(S3C2410_GPB(0), 0);
-	s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+	gpio_direction_output(S3C2410_GPB(0), 0);
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
 
 	return 0;
 }
 
 static void h1940_backlight_exit(struct device *dev)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/);
+	gpio_direction_output(S3C2410_GPB(0), 1);
 }
 
 static struct platform_pwm_backlight_data backlight_data = {
@@ -245,18 +247,18 @@
 
 	if (!power) {
 		/* set to 3ec */
-		s3c2410_gpio_setpin(S3C2410_GPC(0), 0);
+		gpio_direction_output(S3C2410_GPC(0), 0);
 		/* wait for 3ac */
 		do {
-			value = s3c2410_gpio_getpin(S3C2410_GPC(6));
+			value = gpio_get_value(S3C2410_GPC(6));
 		} while (value);
 		/* set to 38c */
-		s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+		gpio_direction_output(S3C2410_GPC(5), 0);
 	} else {
 		/* Set to 3ac */
-		s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+		gpio_direction_output(S3C2410_GPC(5), 1);
 		/* Set to 3ad */
-		s3c2410_gpio_setpin(S3C2410_GPC(0), 1);
+		gpio_direction_output(S3C2410_GPC(0), 1);
 	}
 }
 
@@ -271,7 +273,6 @@
 };
 
 static struct platform_device *h1940_devices[] __initdata = {
-	&s3c_device_ts,
 	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
@@ -285,6 +286,8 @@
 	&s3c_device_timer[0],
 	&h1940_backlight,
 	&h1940_lcd_powerdev,
+	&s3c_device_adc,
+	&s3c_device_ts,
 };
 
 static void __init h1940_map_io(void)
@@ -332,12 +335,13 @@
 	gpio_request(S3C2410_GPC(5), "LCD power");
 	gpio_request(S3C2410_GPC(6), "LCD power");
 
+	gpio_direction_input(S3C2410_GPC(6));
 
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }
 
 MACHINE_START(H1940, "IPAQ-H1940")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/mach-n30.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/mach-n30.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/mach-n30.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/mach-n30.c	2010-08-01 18:11:14.000000000 -0400
@@ -26,6 +26,7 @@
 #include <linux/serial_core.h>
 #include <linux/timer.h>
 #include <linux/io.h>
+#include <linux/mmc/host.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -46,6 +47,7 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/mci.h>
 #include <plat/s3c2410.h>
 #include <plat/udc.h>
 
@@ -86,10 +88,10 @@
 {
 	switch (cmd) {
 	case S3C2410_UDC_P_ENABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
+		gpio_set_value(S3C2410_GPB(3), 1);
 		break;
 	case S3C2410_UDC_P_DISABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
+		gpio_set_value(S3C2410_GPB(3), 0);
 		break;
 	case S3C2410_UDC_P_RESET :
 		break;
@@ -172,8 +174,10 @@
 	{
 		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
+		.type		= EV_PWR,
 		.desc		= "Power",
 		.active_low	= 0,
+		.wakeup		= 1,
 	},
 	{
 		.gpio		= S3C2410_GPG(9),
@@ -264,6 +268,14 @@
 	.def_trigger	= "",
 };
 
+/* This is the blue LED on the device. Originaly used to indicate GPS activity
+ * by flashing. */
+static struct s3c24xx_led_platdata n35_blue_led_pdata = {
+	.name		= "blue_led",
+	.gpio		= S3C2410_GPD(8),
+	.def_trigger	= "",
+};
+
 /* This LED is driven by the battery microcontroller, and is blinking
  * red, blinking green or solid green when the battery is low,
  * charging or full respectively.  By driving GPD9 low, it's possible
@@ -275,6 +287,13 @@
 	.def_trigger	= "",
 };
 
+static struct s3c24xx_led_platdata n35_warning_led_pdata = {
+	.name		= "warning_led",
+	.flags          = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+	.gpio		= S3C2410_GPD(9),
+	.def_trigger	= "",
+};
+
 static struct platform_device n30_blue_led = {
 	.name		= "s3c24xx_led",
 	.id		= 1,
@@ -283,6 +302,14 @@
 	},
 };
 
+static struct platform_device n35_blue_led = {
+	.name		= "s3c24xx_led",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &n35_blue_led_pdata,
+	},
+};
+
 static struct platform_device n30_warning_led = {
 	.name		= "s3c24xx_led",
 	.id		= 2,
@@ -291,6 +318,14 @@
 	},
 };
 
+static struct platform_device n35_warning_led = {
+	.name		= "s3c24xx_led",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &n35_warning_led_pdata,
+	},
+};
+
 static struct s3c2410fb_display n30_display __initdata = {
 	.type		= S3C2410_LCDCON1_TFT,
 	.width		= 240,
@@ -317,13 +352,36 @@
 	.lpcsel		= 0x06,
 };
 
+static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
+{
+	switch (power_mode) {
+	case MMC_POWER_ON:
+	case MMC_POWER_UP:
+		gpio_set_value(S3C2410_GPG(4), 1);
+		break;
+	case MMC_POWER_OFF:
+	default:
+		gpio_set_value(S3C2410_GPG(4), 0);
+		break;
+	}
+}
+
+static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = {
+	.gpio_detect	= S3C2410_GPF(1),
+	.gpio_wprotect  = S3C2410_GPG(10),
+	.ocr_avail	= MMC_VDD_32_33,
+	.set_power	= n30_sdi_set_power,
+};
+
 static struct platform_device *n30_devices[] __initdata = {
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_ohci,
+	&s3c_device_rtc,
 	&s3c_device_usbgadget,
+	&s3c_device_sdi,
 	&n30_button_device,
 	&n30_blue_led,
 	&n30_warning_led,
@@ -334,8 +392,12 @@
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
+	&s3c_device_rtc,
 	&s3c_device_usbgadget,
+	&s3c_device_sdi,
 	&n35_button_device,
+	&n35_blue_led,
+	&n35_warning_led,
 };
 
 static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
@@ -490,17 +552,15 @@
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
 }
 
-static void __init n30_init_irq(void)
-{
-	s3c24xx_init_irq();
-}
-
 /* GPB3 is the line that controls the pull-up for the USB D+ line */
 
 static void __init n30_init(void)
 {
+	WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
+
 	s3c24xx_fb_set_platdata(&n30_fb_info);
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
+	s3c24xx_mci_set_platdata(&n30_mci_cfg);
 	s3c_i2c0_set_platdata(&n30_i2ccfg);
 
 	/* Turn off suspend on both USB ports, and switch the
@@ -532,10 +592,13 @@
 		s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 				      S3C2410_MISCCR_USBSUSPND0 |
 				      S3C2410_MISCCR_USBSUSPND1,
-				      S3C2410_MISCCR_USBSUSPND1);
+				      S3C2410_MISCCR_USBSUSPND0);
 
 		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
 	}
+
+	WARN_ON(gpio_request(S3C2410_GPB(3), "udc pup"));
+	gpio_direction_output(S3C2410_GPB(3), 0);
 }
 
 MACHINE_START(N30, "Acer-N30")
@@ -547,7 +610,7 @@
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
-	.init_irq	= n30_init_irq,
+	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
 MACHINE_END
 
@@ -559,6 +622,6 @@
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
-	.init_irq	= n30_init_irq,
+	.init_irq	= s3c24xx_init_irq,
 	.map_io		= n30_map_io,
 MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/mach-qt2410.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/mach-qt2410.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/mach-qt2410.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/mach-qt2410.c	2010-08-01 18:11:14.000000000 -0400
@@ -58,6 +58,7 @@
 #include <plat/iic.h>
 
 #include <plat/common-smdk.h>
+#include <plat/gpio-cfg.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -219,10 +220,10 @@
 {
 	switch (cs) {
 	case BITBANG_CS_ACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
+		gpio_set_value(S3C2410_GPB(5), 0);
 		break;
 	case BITBANG_CS_INACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
+		gpio_set_value(S3C2410_GPB(5), 1);
 		break;
 	}
 }
@@ -347,13 +348,14 @@
 	}
 	s3c24xx_fb_set_platdata(&qt2410_fb_info);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
 	s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
 
 	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
+	WARN_ON(gpio_request(S3C2410_GPB(5), "spi cs"));
+	gpio_direction_output(S3C2410_GPB(5), 1);
 
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c_pm_init();
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/mach-vr1000.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/mach-vr1000.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/mach-vr1000.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/mach-vr1000.c	2010-08-01 18:11:14.000000000 -0400
@@ -357,8 +357,7 @@
 
 static void vr1000_power_off(void)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
+	gpio_direction_output(S3C2410_GPB(9), 1);
 }
 
 static void __init vr1000_map_io(void)
@@ -395,6 +394,8 @@
 
 	nor_simtec_init();
 	simtec_audio_add(NULL, true, NULL);
+
+	WARN_ON(gpio_request(S3C2410_GPB(9), "power off"));
 }
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/Makefile.boot linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/Makefile.boot
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/Makefile.boot	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/Makefile.boot	2010-08-01 18:11:14.000000000 -0400
@@ -1,3 +1,7 @@
-   zreladdr-y	:= 0x30008000
-params_phys-y	:= 0x30000100
-
+ifeq ($(CONFIG_PM_H1940),y)
+	zreladdr-y		:= 0x30108000
+	params_phys-y	:= 0x30100100
+else
+	zreladdr-y		:= 0x30008000
+	params_phys-y	:= 0x30000100
+endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/pm.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/pm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/pm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/pm.c	2010-08-01 18:11:14.000000000 -0400
@@ -60,10 +60,10 @@
 		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
 	}
 
-	/* the RX3715 uses similar code and the same H1940 and the
+	/* RX3715 and RX1950 use similar to H1940 code and the
 	 * same offsets for resume and checksum pointers */
 
-	if (machine_is_rx3715()) {
+	if (machine_is_rx3715() || machine_is_rx1950()) {
 		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
 		unsigned long ptr;
 		unsigned long calc = 0;
@@ -79,6 +79,17 @@
 	if ( machine_is_aml_m5900() )
 		s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 
+	if (machine_is_rx1950()) {
+		/* According to S3C2442 user's manual, page 7-17,
+		 * when the system is operating in NAND boot mode,
+		 * the hardware pin configuration - EINT[23:21] –
+		 * must be set as input for starting up after
+		 * wakeup from sleep mode
+		 */
+		s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT);
+	}
 }
 
 static int s3c2410_pm_resume(struct sys_device *dev)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/s3c2410.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/s3c2410.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2410/s3c2410.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2410/s3c2410.c	2010-08-01 18:11:14.000000000 -0400
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
@@ -40,6 +41,10 @@
 #include <plat/clock.h>
 #include <plat/pll.h>
 
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
 /* Initial IO mappings */
 
 static struct map_desc s3c2410_iodesc[] __initdata = {
@@ -65,6 +70,9 @@
 
 void __init s3c2410_map_io(void)
 {
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2412/dma.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2412/dma.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2412/dma.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2412/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -30,7 +30,6 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <plat/regs-s3c2412-iis.h>
 #include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
@@ -119,13 +118,11 @@
 		.name		= "i2s-sdi",
 		.channels	= MAP(S3C2412_DMAREQSEL_I2SRX),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_I2SRX),
-		.hw_addr.from	= S3C2410_PA_IIS + S3C2412_IISRXD,
 	},
 	[DMACH_I2S_OUT] = {
 		.name		= "i2s-sdo",
 		.channels	= MAP(S3C2412_DMAREQSEL_I2STX),
 		.channels_rx	= MAP(S3C2412_DMAREQSEL_I2STX),
-		.hw_addr.to	= S3C2410_PA_IIS + S3C2412_IISTXD,
 	},
 	[DMACH_USB_EP1] = {
 		.name		= "usb-ep1",
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2412/gpio.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2412/gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2412/gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2412/gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -16,41 +16,43 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <mach/regs-gpio.h>
-
 #include <mach/hardware.h>
 
+#include <plat/gpio-core.h>
+
 int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long offs = pin - chip->chip.base;
 	unsigned long flags;
 	unsigned long slpcon;
 
 	offs *= 2;
 
-	if (pin < S3C2410_GPIO_BANKB)
+	if (pin < S3C2410_GPB(0))
 		return -EINVAL;
 
-	if (pin >= S3C2410_GPIO_BANKF &&
-	    pin <= S3C2410_GPIO_BANKG)
+	if (pin >= S3C2410_GPF(0) &&
+	    pin <= S3C2410_GPG(16))
 		return -EINVAL;
 
-	if (pin > (S3C2410_GPIO_BANKH + 32))
+	if (pin > S3C2410_GPH(16))
 		return -EINVAL;
 
 	local_irq_save(flags);
 
-	slpcon = __raw_readl(base + 0x0C);
+	slpcon = __raw_readl(chip->base + 0x0C);
 
 	slpcon &= ~(3 << offs);
 	slpcon |= state << offs;
 
-	__raw_writel(slpcon, base + 0x0C);
+	__raw_writel(slpcon, chip->base + 0x0C);
 
 	local_irq_restore(flags);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2412/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-s3c2412/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2412/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2412/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -16,7 +16,8 @@
 config CPU_S3C2412_ONLY
 	bool
 	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
-		   !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412
+		   !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+		   !CPU_S3C2443 && CPU_S3C2412
 	default y if CPU_S3C2412
 
 config S3C2412_DMA
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2412/mach-jive.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2412/mach-jive.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2412/mach-jive.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2412/mach-jive.c	2010-08-01 18:11:14.000000000 -0400
@@ -48,6 +48,7 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -357,8 +358,7 @@
 {
 	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
 
-	s3c2410_gpio_setpin(S3C2410_GPG(13), set);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
+	gpio_set_value(S3C2410_GPG(13), set);
 }
 
 #undef LCD_UPPER_MARGIN
@@ -391,7 +391,7 @@
 
 static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
+	gpio_set_value(S3C2410_GPB(7), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_lcd_spi = {
@@ -413,7 +413,7 @@
 
 static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
+	gpio_set_value(S3C2410_GPH(10), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_wm8750_spi = {
@@ -531,7 +531,7 @@
 	printk(KERN_INFO "powering system down...\n");
 
 	s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
 }
 
 static void __init jive_machine_init(void)
@@ -636,22 +636,22 @@
 
 	/* initialise the spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
+	gpio_request(S3C2410_GPG(13), "lcm reset");
+	gpio_direction_output(S3C2410_GPG(13), 0);
 
-	s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
+	gpio_request(S3C2410_GPB(7), "jive spi");
+	gpio_direction_output(S3C2410_GPB(7), 1);
 
 	s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
 
 	s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
 
 	/* initialise the WM8750 spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
+	gpio_request(S3C2410_GPH(10), "jive wm8750 spi");
+	gpio_direction_output(S3C2410_GPH(10), 1);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
@@ -674,7 +674,7 @@
 }
 
 MACHINE_START(JIVE, "JIVE")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2412/mach-smdk2413.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2412/mach-smdk2413.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2412/mach-smdk2413.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2412/mach-smdk2413.c	2010-08-01 18:11:14.000000000 -0400
@@ -85,10 +85,10 @@
 	switch (cmd)
 	{
 		case S3C2410_UDC_P_ENABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
+			gpio_set_value(S3C2410_GPF(2), 1);
 			break;
 		case S3C2410_UDC_P_DISABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+			gpio_set_value(S3C2410_GPF(2), 0);
 			break;
 		case S3C2410_UDC_P_RESET :
 			break;
@@ -134,8 +134,8 @@
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
-	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+	WARN_ON(gpio_request(S3C2410_GPF(2), "udc pull"));
+	gpio_direction_output(S3C2410_GPF(2), 0);
 
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 			      S3C2410_MISCCR_USBSUSPND0 |
@@ -150,7 +150,7 @@
 }
 
 MACHINE_START(S3C2413, "S3C2413")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
@@ -163,7 +163,7 @@
 MACHINE_END
 
 MACHINE_START(SMDK2412, "SMDK2412")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
@@ -176,7 +176,7 @@
 MACHINE_END
 
 MACHINE_START(SMDK2413, "SMDK2413")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2416/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2416/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2416/clock.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2416/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,135 @@
+/* linux/arch/arm/mach-s3c2416/clock.c
+ *
+ * Copyright (c) 2010 Simtec Electronics
+ * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * S3C2416 Clock control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <plat/s3c2416.h>
+#include <plat/s3c2443.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/pll6553x.h>
+#include <plat/pll.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2443-clock.h>
+
+static unsigned int armdiv[8] = {
+	[0] = 1,
+	[1] = 2,
+	[2] = 3,
+	[3] = 4,
+	[5] = 6,
+	[7] = 8,
+};
+
+/* ID to hardware numbering, 0 is HSMMC1, 1 is HSMMC0 */
+static struct clksrc_clk hsmmc_div[] = {
+	[0] = {
+		.clk = {
+			.name	= "hsmmc-div",
+			.id	= 1,
+			.parent	= &clk_esysclk.clk,
+		},
+		.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
+	},
+	[1] = {
+		.clk = {
+			.name	= "hsmmc-div",
+			.id	= 0,
+			.parent	= &clk_esysclk.clk,
+		},
+		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
+	},
+};
+
+static struct clksrc_clk hsmmc_mux[] = {
+	[0] = {
+		.clk	= {
+			.id	= 1,
+			.name	= "hsmmc-if",
+			.ctrlbit = (1 << 6),
+			.enable = s3c2443_clkcon_enable_s,
+		},
+		.sources = &(struct clksrc_sources) {
+			.nr_sources = 2,
+			.sources = (struct clk *[]) {
+				[0] = &hsmmc_div[0].clk,
+				[1] = NULL, /* to fix */
+			},
+		},
+		.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
+	},
+	[1] = {
+		.clk	= {
+			.id	= 0,
+			.name	= "hsmmc-if",
+			.ctrlbit = (1 << 12),
+			.enable = s3c2443_clkcon_enable_s,
+		},
+		.sources = &(struct clksrc_sources) {
+			.nr_sources = 2,
+			.sources = (struct clk *[]) {
+				[0] = &hsmmc_div[1].clk,
+				[1] = NULL, /* to fix */
+			},
+		},
+		.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
+	},
+};
+
+
+static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
+{
+	clkcon0 &= 7 << S3C2443_CLKDIV0_ARMDIV_SHIFT;
+
+	return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+}
+
+void __init_or_cpufreq s3c2416_setup_clocks(void)
+{
+	s3c2443_common_setup_clocks(s3c2416_get_pll, s3c2416_fclk_div);
+}
+
+
+static struct clksrc_clk *clksrcs[] __initdata = {
+	&hsmmc_div[0],
+	&hsmmc_div[1],
+	&hsmmc_mux[0],
+	&hsmmc_mux[1],
+};
+
+void __init s3c2416_init_clocks(int xtal)
+{
+	u32 epllcon = __raw_readl(S3C2443_EPLLCON);
+	u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4);
+	int ptr;
+
+	/* s3c2416 EPLL compatible with s3c64xx */
+	clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1);
+
+	clk_epll.parent = &clk_epllref.clk;
+
+	s3c2443_common_init_clocks(xtal, s3c2416_get_pll, s3c2416_fclk_div);
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_register_clksrc(clksrcs[ptr], 1);
+
+	s3c_pwmclk_init();
+
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2416/irq.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2416/irq.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2416/irq.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2416/irq.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,254 @@
+/* linux/arch/arm/mach-s3c2416/irq.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
+
+static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len)
+{
+	unsigned int subsrc, submsk;
+	unsigned int end;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc  &= ~submsk;
+	subsrc >>= (irq - S3C2410_IRQSUB(0));
+	subsrc  &= (1 << len)-1;
+
+	end = len + irq;
+
+	for (; irq < end && subsrc; irq++) {
+		if (subsrc & 1)
+			generic_handle_irq(irq);
+
+		subsrc >>= 1;
+	}
+}
+
+/* WDT/AC97 sub interrupts */
+
+static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2416_irq_demux(IRQ_S3C2443_WDT, 4);
+}
+
+#define INTMSK_WDTAC97	(1UL << (IRQ_WDT - IRQ_EINT0))
+#define SUBMSK_WDTAC97	INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
+
+static void s3c2416_irq_wdtac97_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static void s3c2416_irq_wdtac97_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_WDTAC97);
+}
+
+static void s3c2416_irq_wdtac97_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static struct irq_chip s3c2416_irq_wdtac97 = {
+	.mask	    = s3c2416_irq_wdtac97_mask,
+	.unmask	    = s3c2416_irq_wdtac97_unmask,
+	.ack	    = s3c2416_irq_wdtac97_ack,
+};
+
+
+/* LCD sub interrupts */
+
+static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4);
+}
+
+#define INTMSK_LCD	(1UL << (IRQ_LCD - IRQ_EINT0))
+#define SUBMSK_LCD	INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
+
+static void s3c2416_irq_lcd_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static void s3c2416_irq_lcd_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_LCD);
+}
+
+static void s3c2416_irq_lcd_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static struct irq_chip s3c2416_irq_lcd = {
+	.mask	    = s3c2416_irq_lcd_mask,
+	.unmask	    = s3c2416_irq_lcd_unmask,
+	.ack	    = s3c2416_irq_lcd_ack,
+};
+
+
+/* DMA sub interrupts */
+
+static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6);
+}
+
+#define INTMSK_DMA	(1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
+#define SUBMSK_DMA	INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
+
+
+static void s3c2416_irq_dma_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static void s3c2416_irq_dma_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_DMA);
+}
+
+static void s3c2416_irq_dma_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static struct irq_chip s3c2416_irq_dma = {
+	.mask	    = s3c2416_irq_dma_mask,
+	.unmask	    = s3c2416_irq_dma_unmask,
+	.ack	    = s3c2416_irq_dma_ack,
+};
+
+
+/* UART3 sub interrupts */
+
+static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
+}
+
+#define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
+#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
+
+
+static void s3c2416_irq_uart3_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static void s3c2416_irq_uart3_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_UART3);
+}
+
+static void s3c2416_irq_uart3_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static struct irq_chip s3c2416_irq_uart3 = {
+	.mask	    = s3c2416_irq_uart3_mask,
+	.unmask	    = s3c2416_irq_uart3_unmask,
+	.ack	    = s3c2416_irq_uart3_ack,
+};
+
+
+/* IRQ initialisation code */
+
+static int __init s3c2416_add_sub(unsigned int base,
+				   void (*demux)(unsigned int,
+						 struct irq_desc *),
+				   struct irq_chip *chip,
+				   unsigned int start, unsigned int end)
+{
+	unsigned int irqno;
+
+	set_irq_chip(base, &s3c_irq_level_chip);
+	set_irq_handler(base, handle_level_irq);
+	set_irq_chained_handler(base, demux);
+
+	for (irqno = start; irqno <= end; irqno++) {
+		set_irq_chip(irqno, chip);
+		set_irq_handler(irqno, handle_level_irq);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	return 0;
+}
+
+static int __init s3c2416_irq_add(struct sys_device *sysdev)
+{
+	printk(KERN_INFO "S3C2416: IRQ Support\n");
+
+	s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd,
+			IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4);
+
+	s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma,
+			&s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
+
+	s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3,
+			&s3c2416_irq_uart3,
+			IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
+
+	s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97,
+			&s3c2416_irq_wdtac97,
+			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2416_irq_driver = {
+	.add		= s3c2416_irq_add,
+};
+
+static int __init s3c2416_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_irq_driver);
+}
+
+arch_initcall(s3c2416_irq_init);
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2416/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-s3c2416/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2416/Kconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2416/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,39 @@
+# arch/arm/mach-s3c2416/Kconfig
+#
+# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+#
+# Licensed under GPLv2
+
+# note, this also supports the S3C2450 which is so similar it has the same
+# ID code as the S3C2416.
+
+config CPU_S3C2416
+	bool
+	depends on ARCH_S3C2410
+	select CPU_ARM926T
+	select S3C2416_DMA if S3C2410_DMA
+	select CPU_LLSERIAL_S3C2440
+	select S3C_GPIO_PULL_UPDOWN
+	select SAMSUNG_CLKSRC
+	select S3C2443_CLOCK
+	help
+	  Support for the S3C2416 SoC from the S3C24XX line
+
+config S3C2416_DMA
+	bool
+	depends on CPU_S3C2416
+	help
+	  Internal config node for S3C2416 DMA support
+
+menu "S3C2416 Machines"
+
+config MACH_SMDK2416
+	bool "SMDK2416"
+	select CPU_S3C2416
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	help
+	  Say Y here if you are using an SMDK2416
+
+endmenu
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2416/mach-smdk2416.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2416/mach-smdk2416.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2416/mach-smdk2416.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2416/mach-smdk2416.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,206 @@
+/* linux/arch/arm/mach-s3c2416/mach-hanlin_v3c.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
+
+#include <mach/idle.h>
+#include <mach/leds-gpio.h>
+#include <plat/iic.h>
+
+#include <plat/s3c2416.h>
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/nand.h>
+
+#include <plat/regs-fb-v4.h>
+#include <plat/fb.h>
+
+#include <plat/common-smdk.h>
+
+static struct map_desc smdk2416_iodesc[] __initdata = {
+	/* ISA IO Space map (memory space selected by A24) */
+
+	{
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+		.pfn		= __phys_to_pfn(S3C2410_CS2),
+		.length		= 0x10000,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+		.pfn		= __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+		.length		= SZ_4M,
+		.type		= MT_DEVICE,
+	}
+};
+
+#define UCON (S3C2410_UCON_DEFAULT	| \
+		S3C2440_UCON_PCLK	| \
+		S3C2443_UCON_RXERR_IRQEN)
+
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+
+#define UFCON (S3C2410_UFCON_RXTRIG8	| \
+		S3C2410_UFCON_FIFOMODE	| \
+		S3C2440_UFCON_TXTRIG16)
+
+static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	/* IR port */
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON | 0x50,
+		.ufcon	     = UFCON,
+	}
+};
+
+struct s3c_fb_pd_win smdk2416_fb_win[] = {
+	[0] = {
+		/* think this is the same as the smdk6410 */
+		.win_mode	= {
+			.pixclock	= 41094,
+			.left_margin	= 8,
+			.right_margin	= 13,
+			.upper_margin	= 7,
+			.lower_margin	= 5,
+			.hsync_len	= 3,
+			.vsync_len	= 1,
+			.xres           = 800,
+			.yres           = 480,
+		},
+		.default_bpp	= 16,
+		.max_bpp	= 32,
+	},
+};
+
+static void s3c2416_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio;
+
+	for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
+
+static struct s3c_fb_platdata smdk2416_fb_platdata = {
+	.win[0]		= &smdk2416_fb_win[0],
+	.setup_gpio	= s3c2416_fb_gpio_setup_24bpp,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct platform_device *smdk2416_devices[] __initdata = {
+	&s3c_device_fb,
+	&s3c_device_wdt,
+	&s3c_device_ohci,
+	&s3c_device_i2c0,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+};
+
+static void __init smdk2416_map_io(void)
+{
+	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+}
+
+static void __init smdk2416_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_fb_set_platdata(&smdk2416_fb_platdata);
+
+	gpio_request(S3C2410_GPB(4), "USBHost Power");
+	gpio_direction_output(S3C2410_GPB(4), 1);
+
+	gpio_request(S3C2410_GPB(3), "Display Power");
+	gpio_direction_output(S3C2410_GPB(3), 1);
+
+	gpio_request(S3C2410_GPB(1), "Display Reset");
+	gpio_direction_output(S3C2410_GPB(1), 1);
+
+	platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
+	smdk_machine_init();
+}
+
+MACHINE_START(SMDK2416, "SMDK2416")
+	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= smdk2416_map_io,
+	.init_machine	= smdk2416_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2416/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-s3c2416/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2416/Makefile	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2416/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+# arch/arm/mach-s3c2416/Makefile
+#
+# Copyright 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock.o
+obj-$(CONFIG_CPU_S3C2416)	+= irq.o
+
+#obj-$(CONFIG_S3C2416_DMA)	+= dma.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK2416)	+= mach-smdk2416.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2416/s3c2416.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2416/s3c2416.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2416/s3c2416.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2416/s3c2416.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s3c2416/s3c2416.c
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
+ *	as part of OpenInkpot project
+ * Copyright (c) 2009 Promwad Innovation Company
+ *	Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * Samsung S3C2416 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/proc-fns.h>
+#include <asm/irq.h>
+
+#include <mach/reset.h>
+#include <mach/idle.h>
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/s3c2416.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include <plat/iic-core.h>
+
+static struct map_desc s3c2416_iodesc[] __initdata = {
+	IODESC_ENT(WATCHDOG),
+	IODESC_ENT(CLKPWR),
+	IODESC_ENT(TIMER),
+};
+
+struct sysdev_class s3c2416_sysclass = {
+	.name = "s3c2416-core",
+};
+
+static struct sys_device s3c2416_sysdev = {
+	.cls		= &s3c2416_sysclass,
+};
+
+static void s3c2416_hard_reset(void)
+{
+	__raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
+}
+
+int __init s3c2416_init(void)
+{
+	printk(KERN_INFO "S3C2416: Initializing architecture\n");
+
+	s3c24xx_reset_hook = s3c2416_hard_reset;
+	/* s3c24xx_idle = s3c2416_idle;	*/
+
+	/* change WDT IRQ number */
+	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
+	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_device_fb.name = "s3c2443-fb";
+
+	return sysdev_register(&s3c2416_sysdev);
+}
+
+void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+
+	s3c_device_nand.name = "s3c2416-nand";
+}
+
+/* s3c2416_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2416_map_io(void)
+{
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+
+	iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
+}
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2416 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2416_core_init(void)
+{
+	return sysdev_class_register(&s3c2416_sysclass);
+}
+
+core_initcall(s3c2416_core_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -6,6 +6,7 @@
 	bool
 	depends on ARCH_S3C2410
 	select CPU_ARM920T
+	select S3C_GPIO_PULL_UP
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select S3C2410_GPIO
@@ -187,4 +188,17 @@
 	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
 	  available via various sources. It can come with a 3.5" or 7" touch LCD.
 
+config MACH_RX1950
+	bool "HP iPAQ rx1950"
+	select CPU_S3C2442
+	select S3C24XX_DCLK
+	select PM_H1940 if PM
+	select I2C
+	select S3C2410_PWM
+	select S3C_DEV_NAND
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
+	select S3C2440_XTAL_16934400
+	help
+	   Say Y here if you're using HP iPAQ rx1950
+
 endmenu
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-gta02.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-gta02.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-gta02.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-gta02.c	2010-08-01 18:11:14.000000000 -0400
@@ -49,7 +49,6 @@
 #include <linux/io.h>
 
 #include <linux/i2c.h>
-#include <linux/backlight.h>
 #include <linux/regulator/machine.h>
 
 #include <linux/mfd/pcf50633/core.h>
@@ -57,6 +56,7 @@
 #include <linux/mfd/pcf50633/adc.h>
 #include <linux/mfd/pcf50633/gpio.h>
 #include <linux/mfd/pcf50633/pmic.h>
+#include <linux/mfd/pcf50633/backlight.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -254,6 +254,12 @@
 	"battery",
 };
 
+static struct pcf50633_bl_platform_data gta02_backlight_data = {
+	.default_brightness = 0x3f,
+	.default_brightness_limit = 0,
+	.ramp_time = 5,
+};
+
 struct pcf50633_platform_data gta02_pcf_pdata = {
 	.resumers = {
 		[0] =	PCF50633_INT1_USBINS |
@@ -271,6 +277,8 @@
 
 	.charger_reference_current_ma = 1000,
 
+	.backlight_data = &gta02_backlight_data,
+
 	.reg_init_data = {
 		[PCF50633_REGULATOR_AUTO] = {
 			.constraints = {
@@ -478,71 +486,6 @@
 
 };
 
-
-
-static void gta02_bl_set_intensity(int intensity)
-{
-	struct pcf50633 *pcf = gta02_pcf;
-	int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-
-	/* We map 8-bit intensity to 6-bit intensity in hardware. */
-	intensity >>= 2;
-
-	/*
-	 * This can happen during, eg, print of panic on blanked console,
-	 * but we can't service i2c without interrupts active, so abort.
-	 */
-	if (in_atomic()) {
-		printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n");
-		return;
-	}
-
-	old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-	if (intensity == old_intensity)
-		return;
-
-	/* We can't do this anywhere else. */
-	pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
-
-	if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
-		old_intensity = 0;
-
-	/*
-	 * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
-	 * if seen, you have to re-enable the LED unit.
-	 */
-	if (!intensity || !old_intensity)
-		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
-
-	/* Illegal to set LEDOUT to 0. */
-	if (!intensity)
-		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
-	else
-		pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
-					  intensity);
-
-	if (intensity)
-		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
-
-}
-
-static struct generic_bl_info gta02_bl_info = {
-	.name			= "gta02-bl",
-	.max_intensity		= 0xff,
-	.default_intensity	= 0xff,
-	.set_bl_intensity	= gta02_bl_set_intensity,
-};
-
-static struct platform_device gta02_bl_dev = {
-	.name			= "generic-bl",
-	.id			= 1,
-	.dev = {
-		.platform_data = &gta02_bl_info,
-	},
-};
-
-
-
 /* USB */
 static struct s3c2410_hcd_info gta02_usb_info __initdata = {
 	.port[0]	= {
@@ -579,7 +522,6 @@
 /* These guys DO need to be children of PMU. */
 
 static struct platform_device *gta02_devices_pmu_children[] = {
-	&gta02_bl_dev,
 };
 
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-mini2440.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-mini2440.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-mini2440.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-mini2440.c	2010-08-01 18:11:14.000000000 -0400
@@ -53,6 +53,7 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -102,10 +103,10 @@
 
 	switch (cmd) {
 		case S3C2410_UDC_P_ENABLE :
-			s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+			gpio_set_value(S3C2410_GPC(5), 1);
 			break;
 		case S3C2410_UDC_P_DISABLE :
-			s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+			gpio_set_value(S3C2410_GPC(5), 0);
 			break;
 		case S3C2410_UDC_P_RESET :
 			break;
@@ -632,25 +633,25 @@
 	mini2440_parse_features(&features, mini2440_features_str);
 
 	/* turn LCD on */
-	s3c2410_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
+	s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
 
 	/* Turn the backlight early on */
-	s3c2410_gpio_setpin(S3C2410_GPG(4), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT);
+	WARN_ON(gpio_request(S3C2410_GPG(4), "backlight"));
+	gpio_direction_output(S3C2410_GPG(4), 1);
 
 	/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
-	s3c2410_gpio_pullup(S3C2410_GPB(1), 0);
+	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
 	s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
+	s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
 
 	/* Make sure the D+ pullup pin is output */
-	s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
+	WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup"));
+	gpio_direction_output(S3C2410_GPC(5), 0);
 
 	/* mark the key as input, without pullups (there is one on the board) */
 	for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
-		s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0);
-		s3c2410_gpio_cfgpin(mini2440_buttons[i].gpio,
-					S3C2410_GPIO_INPUT);
+		s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
 	}
 	if (features.lcd_index != -1) {
 		int li;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-nexcoder.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-nexcoder.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-nexcoder.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-nexcoder.c	2010-08-01 18:11:14.000000000 -0400
@@ -40,6 +40,7 @@
 #include <plat/regs-serial.h>
 #include <plat/iic.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/s3c2410.h>
 #include <plat/s3c244x.h>
 #include <plat/clock.h>
@@ -122,15 +123,15 @@
 {
 	// Initialize SCCB bus
 	s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
-	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
 	s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
-	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
 
 	// Power up the sensor board
 	s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+	s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
 	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
+	s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
 }
 
 static void __init nexcoder_map_io(void)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-osiris.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-osiris.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-osiris.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-osiris.c	2010-08-01 18:11:14.000000000 -0400
@@ -49,6 +49,7 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -298,7 +299,7 @@
 
 	/* ensure that an nRESET is not generated on resume. */
 	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
@@ -310,7 +311,7 @@
 
 	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+	s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 
 	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-rx1950.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-rx1950.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-rx1950.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-rx1950.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,582 @@
+/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
+ *
+ * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
+ * Copyright (c) 2007-2010 Vasily Khoruzhick
+ *
+ * based on smdk2440 written by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/sysdev.h>
+#include <linux/pwm_backlight.h>
+#include <linux/pwm.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/h1940.h>
+#include <mach/fb.h>
+
+#include <plat/clock.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-iic.h>
+#include <plat/mci.h>
+#include <plat/udc.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+#include <plat/ts.h>
+
+#define LCD_PWM_PERIOD 192960
+#define LCD_PWM_DUTY 127353
+
+static struct map_desc rx1950_iodesc[] __initdata = {
+};
+
+static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = {
+	[0] = {
+	       .name = "fclk",
+	       .divisor = 0x0a,
+	       .min_baud = 0,
+	       .max_baud = 0,
+	},
+};
+
+static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
+	[0] = {
+	       .hwport = 0,
+	       .flags = 0,
+	       .ucon = 0x3c5,
+	       .ulcon = 0x03,
+	       .ufcon = 0x51,
+	       .clocks = rx1950_serial_clocks,
+	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+	},
+	[1] = {
+	       .hwport = 1,
+	       .flags = 0,
+	       .ucon = 0x3c5,
+	       .ulcon = 0x03,
+	       .ufcon = 0x51,
+	       .clocks = rx1950_serial_clocks,
+	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+	},
+	/* IR port */
+	[2] = {
+	       .hwport = 2,
+	       .flags = 0,
+	       .ucon = 0x3c5,
+	       .ulcon = 0x43,
+	       .ufcon = 0xf1,
+	       .clocks = rx1950_serial_clocks,
+	       .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+	},
+};
+
+static struct s3c2410fb_display rx1950_display = {
+	.type = S3C2410_LCDCON1_TFT,
+	.width = 240,
+	.height = 320,
+	.xres = 240,
+	.yres = 320,
+	.bpp = 16,
+
+	.pixclock = 260000,
+	.left_margin = 10,
+	.right_margin = 20,
+	.hsync_len = 10,
+	.upper_margin = 2,
+	.lower_margin = 2,
+	.vsync_len = 2,
+
+	.lcdcon5 = S3C2410_LCDCON5_FRM565 |
+			   S3C2410_LCDCON5_INVVCLK |
+			   S3C2410_LCDCON5_INVVLINE |
+			   S3C2410_LCDCON5_INVVFRAME |
+			   S3C2410_LCDCON5_HWSWP |
+			   (0x02 << 13) |
+			   (0x02 << 15),
+
+};
+
+static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
+	.displays = &rx1950_display,
+	.num_displays = 1,
+	.default_display = 0,
+
+	.lpcsel = 0x02,
+	.gpccon = 0xaa9556a9,
+	.gpccon_mask = 0xffc003fc,
+	.gpcup = 0x0000ffff,
+	.gpcup_mask = 0xffffffff,
+
+	.gpdcon = 0xaa90aaa1,
+	.gpdcon_mask = 0xffc0fff0,
+	.gpdup = 0x0000fcfd,
+	.gpdup_mask = 0xffffffff,
+
+};
+
+static struct pwm_device *lcd_pwm;
+
+void rx1950_lcd_power(int enable)
+{
+	int i;
+	static int enabled;
+	if (enabled == enable)
+		return;
+	if (!enable) {
+
+		/* GPC11-GPC15->OUTPUT */
+		for (i = 11; i < 16; i++)
+			gpio_direction_output(S3C2410_GPC(i), 1);
+
+		/* Wait a bit here... */
+		mdelay(100);
+
+		/* GPD2-GPD7->OUTPUT */
+		/* GPD11-GPD15->OUTPUT */
+		/* GPD2-GPD7->1, GPD11-GPD15->1 */
+		for (i = 2; i < 8; i++)
+			gpio_direction_output(S3C2410_GPD(i), 1);
+		for (i = 11; i < 16; i++)
+			gpio_direction_output(S3C2410_GPD(i), 1);
+
+		/* Wait a bit here...*/
+		mdelay(100);
+
+		/* GPB0->OUTPUT, GPB0->0 */
+		gpio_direction_output(S3C2410_GPB(0), 0);
+
+		/* GPC1-GPC4->OUTPUT, GPC1-4->0 */
+		for (i = 1; i < 5; i++)
+			gpio_direction_output(S3C2410_GPC(i), 0);
+
+		/* GPC15-GPC11->0 */
+		for (i = 11; i < 16; i++)
+			gpio_direction_output(S3C2410_GPC(i), 0);
+
+		/* GPD15-GPD11->0, GPD2->GPD7->0 */
+		for (i = 11; i < 16; i++)
+			gpio_direction_output(S3C2410_GPD(i), 0);
+
+		for (i = 2; i < 8; i++)
+			gpio_direction_output(S3C2410_GPD(i), 0);
+
+		/* GPC6->0, GPC7->0, GPC5->0 */
+		gpio_direction_output(S3C2410_GPC(6), 0);
+		gpio_direction_output(S3C2410_GPC(7), 0);
+		gpio_direction_output(S3C2410_GPC(5), 0);
+
+		/* GPB1->OUTPUT, GPB1->0 */
+		gpio_direction_output(S3C2410_GPB(1), 0);
+		pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
+		pwm_disable(lcd_pwm);
+
+		/* GPC0->0, GPC10->0 */
+		gpio_direction_output(S3C2410_GPC(0), 0);
+		gpio_direction_output(S3C2410_GPC(10), 0);
+	} else {
+		pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
+		pwm_enable(lcd_pwm);
+
+		gpio_direction_output(S3C2410_GPC(0), 1);
+		gpio_direction_output(S3C2410_GPC(5), 1);
+
+		s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
+		gpio_direction_output(S3C2410_GPC(7), 1);
+
+		for (i = 1; i < 5; i++)
+			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+		for (i = 11; i < 16; i++)
+			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+		for (i = 2; i < 8; i++)
+			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+		for (i = 11; i < 16; i++)
+			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+		gpio_direction_output(S3C2410_GPC(10), 1);
+		gpio_direction_output(S3C2410_GPC(6), 1);
+	}
+	enabled = enable;
+}
+
+static void rx1950_bl_power(int enable)
+{
+	static int enabled;
+	if (enabled == enable)
+		return;
+	if (!enable) {
+			gpio_direction_output(S3C2410_GPB(0), 0);
+	} else {
+			/* LED driver need a "push" to power on */
+			gpio_direction_output(S3C2410_GPB(0), 1);
+			/* Warm up backlight for one period of PWM.
+			 * Without this trick its almost impossible to
+			 * enable backlight with low brightness value
+			 */
+			ndelay(48000);
+			s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+	}
+	enabled = enable;
+}
+
+static int rx1950_backlight_init(struct device *dev)
+{
+	WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
+	lcd_pwm = pwm_request(1, "RX1950 LCD");
+	if (IS_ERR(lcd_pwm)) {
+		dev_err(dev, "Unable to request PWM for LCD power!\n");
+		return PTR_ERR(lcd_pwm);
+	}
+
+	rx1950_lcd_power(1);
+	rx1950_bl_power(1);
+
+	return 0;
+}
+
+static void rx1950_backlight_exit(struct device *dev)
+{
+	rx1950_bl_power(0);
+	rx1950_lcd_power(0);
+
+	pwm_free(lcd_pwm);
+	gpio_free(S3C2410_GPB(0));
+}
+
+
+static int rx1950_backlight_notify(struct device *dev, int brightness)
+{
+	if (!brightness) {
+		rx1950_bl_power(0);
+		rx1950_lcd_power(0);
+	} else {
+		rx1950_lcd_power(1);
+		rx1950_bl_power(1);
+	}
+	return brightness;
+}
+
+static struct platform_pwm_backlight_data rx1950_backlight_data = {
+	.pwm_id = 0,
+	.max_brightness = 24,
+	.dft_brightness = 4,
+	.pwm_period_ns = 48000,
+	.init = rx1950_backlight_init,
+	.notify = rx1950_backlight_notify,
+	.exit = rx1950_backlight_exit,
+};
+
+static struct platform_device rx1950_backlight = {
+	.name = "pwm-backlight",
+	.dev = {
+		.parent = &s3c_device_timer[0].dev,
+		.platform_data = &rx1950_backlight_data,
+	},
+};
+
+static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+	switch (power_mode) {
+	case MMC_POWER_OFF:
+		gpio_direction_output(S3C2410_GPJ(1), 0);
+		break;
+	case MMC_POWER_UP:
+	case MMC_POWER_ON:
+		gpio_direction_output(S3C2410_GPJ(1), 1);
+		break;
+	default:
+		break;
+	}
+}
+
+static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
+	.gpio_detect = S3C2410_GPF(5),
+	.gpio_wprotect = S3C2410_GPH(8),
+	.set_power = rx1950_set_mmc_power,
+	.ocr_avail = MMC_VDD_32_33,
+};
+
+static struct mtd_partition rx1950_nand_part[] = {
+	[0] = {
+			.name = "Boot0",
+			.offset = 0,
+			.size = 0x4000,
+			.mask_flags = MTD_WRITEABLE,
+	},
+	[1] = {
+			.name = "Boot1",
+			.offset = MTDPART_OFS_APPEND,
+			.size = 0x40000,
+			.mask_flags = MTD_WRITEABLE,
+	},
+	[2] = {
+			.name = "Kernel",
+			.offset = MTDPART_OFS_APPEND,
+			.size = 0x300000,
+			.mask_flags = 0,
+	},
+	[3] = {
+			.name = "Filesystem",
+			.offset = MTDPART_OFS_APPEND,
+			.size = MTDPART_SIZ_FULL,
+			.mask_flags = 0,
+	},
+};
+
+static struct s3c2410_nand_set rx1950_nand_sets[] = {
+	[0] = {
+			.name = "Internal",
+			.nr_chips = 1,
+			.nr_partitions = ARRAY_SIZE(rx1950_nand_part),
+			.partitions = rx1950_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand rx1950_nand_info = {
+	.tacls = 25,
+	.twrph0 = 50,
+	.twrph1 = 15,
+	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
+	.sets = rx1950_nand_sets,
+};
+
+static void rx1950_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+	switch (cmd) {
+	case S3C2410_UDC_P_ENABLE:
+		gpio_direction_output(S3C2410_GPJ(5), 1);
+		break;
+	case S3C2410_UDC_P_DISABLE:
+		gpio_direction_output(S3C2410_GPJ(5), 0);
+		break;
+	case S3C2410_UDC_P_RESET:
+		break;
+	default:
+		break;
+	}
+}
+
+static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
+	.udc_command = rx1950_udc_pullup,
+	.vbus_pin = S3C2410_GPG(5),
+	.vbus_pin_inverted = 1,
+};
+
+static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
+	.delay = 10000,
+	.presc = 49,
+	.oversampling_shift = 3,
+};
+
+static struct gpio_keys_button rx1950_gpio_keys_table[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= S3C2410_GPF(0),
+		.active_low	= 1,
+		.desc		= "Power button",
+		.wakeup		= 1,
+	},
+	{
+		.code		= KEY_F5,
+		.gpio		= S3C2410_GPF(7),
+		.active_low	= 1,
+		.desc		= "Record button",
+	},
+	{
+		.code		= KEY_F1,
+		.gpio		= S3C2410_GPG(0),
+		.active_low	= 1,
+		.desc		= "Calendar button",
+	},
+	{
+		.code		= KEY_F2,
+		.gpio		= S3C2410_GPG(2),
+		.active_low	= 1,
+		.desc		= "Contacts button",
+	},
+	{
+		.code		= KEY_F3,
+		.gpio		= S3C2410_GPG(3),
+		.active_low	= 1,
+		.desc		= "Mail button",
+	},
+	{
+		.code		= KEY_F4,
+		.gpio		= S3C2410_GPG(7),
+		.active_low	= 1,
+		.desc		= "WLAN button",
+	},
+	{
+		.code		= KEY_LEFT,
+		.gpio		= S3C2410_GPG(10),
+		.active_low	= 1,
+		.desc		= "Left button",
+	},
+	{
+		.code		= KEY_RIGHT,
+		.gpio		= S3C2410_GPG(11),
+		.active_low	= 1,
+		.desc		= "Right button",
+	},
+	{
+		.code		= KEY_UP,
+		.gpio		= S3C2410_GPG(4),
+		.active_low	= 1,
+		.desc		= "Up button",
+	},
+	{
+		.code		= KEY_DOWN,
+		.gpio		= S3C2410_GPG(6),
+		.active_low	= 1,
+		.desc		= "Down button",
+	},
+	{
+		.code		= KEY_ENTER,
+		.gpio		= S3C2410_GPG(9),
+		.active_low	= 1,
+		.desc		= "Ok button"
+	},
+};
+
+static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
+	.buttons = rx1950_gpio_keys_table,
+	.nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
+};
+
+static struct platform_device rx1950_device_gpiokeys = {
+	.name = "gpio-keys",
+	.dev.platform_data = &rx1950_gpio_keys_data,
+};
+
+static struct s3c2410_platform_i2c rx1950_i2c_data = {
+	.flags = 0,
+	.slave_addr = 0x42,
+	.frequency = 400 * 1000,
+	.sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+static struct platform_device *rx1950_devices[] __initdata = {
+	&s3c_device_lcd,
+	&s3c_device_wdt,
+	&s3c_device_i2c0,
+	&s3c_device_iis,
+	&s3c_device_usbgadget,
+	&s3c_device_rtc,
+	&s3c_device_nand,
+	&s3c_device_sdi,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&s3c_device_timer[0],
+	&s3c_device_timer[1],
+	&rx1950_backlight,
+	&rx1950_device_gpiokeys,
+};
+
+static struct clk *rx1950_clocks[] __initdata = {
+	&s3c24xx_clkout0,
+	&s3c24xx_clkout1,
+};
+
+static void __init rx1950_map_io(void)
+{
+	s3c24xx_clkout0.parent  = &clk_h;
+	s3c24xx_clkout1.parent  = &clk_f;
+
+	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
+
+	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
+	s3c24xx_init_clocks(16934000);
+	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+
+	/* setup PM */
+
+#ifdef CONFIG_PM_H1940
+	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
+#endif
+
+	s3c_pm_init();
+}
+
+static void __init rx1950_init_machine(void)
+{
+	int i;
+
+	s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
+	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
+	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
+	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
+	s3c_i2c0_set_platdata(&rx1950_i2c_data);
+	s3c_nand_set_platdata(&rx1950_nand_info);
+
+	/* Turn off suspend on both USB ports, and switch the
+	 * selectable USB port to USB device mode. */
+	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+						S3C2410_MISCCR_USBSUSPND0 |
+						S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+	WARN_ON(gpio_request(S3C2410_GPJ(5), "UDC pullup"));
+	gpio_direction_output(S3C2410_GPJ(5), 0);
+
+	/* mmc power is disabled by default */
+	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
+	gpio_direction_output(S3C2410_GPJ(1), 0);
+
+	for (i = 0; i < 8; i++)
+		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+	for (i = 10; i < 16; i++)
+		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+	for (i = 2; i < 8; i++)
+		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+	for (i = 11; i < 16; i++)
+		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+	WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
+
+	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
+}
+
+MACHINE_START(RX1950, "HP iPAQ RX1950")
+    /* Maintainers: Vasily Khoruzhick */
+    .phys_io = S3C2410_PA_UART,
+	.io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params = S3C2410_SDRAM_PA + 0x100,
+	.map_io = rx1950_map_io,
+	.init_irq = s3c24xx_init_irq,
+	.init_machine = rx1950_init_machine,
+	.timer = &s3c24xx_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-rx3715.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-rx3715.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-rx3715.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-rx3715.c	2010-08-01 18:11:14.000000000 -0400
@@ -209,7 +209,7 @@
 }
 
 MACHINE_START(RX3715, "IPAQ-RX3715")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-smdk2440.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-smdk2440.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/mach-smdk2440.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/mach-smdk2440.c	2010-08-01 18:11:14.000000000 -0400
@@ -174,7 +174,7 @@
 }
 
 MACHINE_START(S3C2440, "SMDK2440")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -34,6 +34,7 @@
 obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
 obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
 obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
 
 # extra machine support
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/s3c2440.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/s3c2440.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2440/s3c2440.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2440/s3c2440.c	2010-08-01 18:11:14.000000000 -0400
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/sysdev.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
@@ -33,6 +34,10 @@
 #include <plat/cpu.h>
 #include <plat/s3c244x.h>
 
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
 static struct sys_device s3c2440_sysdev = {
 	.cls		= &s3c2440_sysclass,
 };
@@ -41,6 +46,9 @@
 {
 	printk("S3C2440: Initialising architecture\n");
 
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+
 	/* change irq for watchdog */
 
 	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2443/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2443/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2443/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2443/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -21,6 +21,7 @@
 */
 
 #include <linux/init.h>
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
@@ -54,111 +55,13 @@
  * set the correct muxing at initialisation
 */
 
-static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
-{
-	u32 ctrlbit = clk->ctrlbit;
-	u32 con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
-}
-
-static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
-}
-
-static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
-}
-
 /* clock selections */
 
-/* mpllref is a direct descendant of clk_xtal by default, but it is not
- * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
- * such directly equating the two source clocks is impossible.
- */
-static struct clk clk_mpllref = {
-	.name		= "mpllref",
-	.parent		= &clk_xtal,
-	.id		= -1,
-};
-
 static struct clk clk_i2s_ext = {
 	.name		= "i2s-ext",
 	.id		= -1,
 };
 
-static struct clk *clk_epllref_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpllref,
-	[2] = &clk_xtal,
-	[3] = &clk_ext,
-};
-
-static struct clksrc_clk clk_epllref = {
-	.clk	= {
-		.name		= "epllref",
-		.id		= -1,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_epllref_sources,
-		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
-
-	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
-	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
-
-	return parent_rate / (div + 1);
-}
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_mpllref,
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_getrate_mdivclk,
-	},
-};
-
-static struct clk *clk_msysclk_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpll,
-	[2] = &clk_mdivclk,
-	[3] = &clk_mpllref,
-};
-
-static struct clksrc_clk clk_msysclk = {
-	.clk	= {
-		.name		= "msysclk",
-		.parent		= &clk_xtal,
-		.id		= -1,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_msysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
-};
-
 /* armdiv
  *
  * this clock is sourced from msysclk and can have a number of
@@ -266,44 +169,6 @@
 	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
 };
 
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static struct clk *clk_sysclk_sources[] = {
-	[0] = &clk_epllref.clk,
-	[1] = &clk_epll,
-};
-
-static struct clksrc_clk clk_esysclk = {
-	.clk	= {
-		.name		= "esysclk",
-		.parent		= &clk_epll,
-		.id		= -1,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_sysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
-};
-
-/* uartclk
- *
- * UART baud-rate clock sourced from esysclk via a divisor
-*/
-
-static struct clksrc_clk clk_uart = {
-	.clk	= {
-		.name		= "uartclk",
-		.id		= -1,
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-};
-
-
 /* hsspi
  *
  * high-speed spi clock, sourced from esysclk
@@ -320,21 +185,6 @@
 	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
 };
 
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static struct clksrc_clk clk_usb_bus_host = {
-	.clk	= {
-		.name		= "usb-bus-host-parent",
-		.id		= -1,
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
 
 /* clk_hsmcc_div
  *
@@ -391,7 +241,7 @@
 
 /* i2s_eplldiv
  *
- * This clock is the output from the I2S divisor of ESYSCLK, and is seperate
+ * This clock is the output from the I2S divisor of ESYSCLK, and is separate
  * from the mux that comes after it (cannot merge into one single clock)
 */
 
@@ -433,89 +283,16 @@
 	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
 };
 
-/* cam-if
- *
- * camera interface bus-clock, divided down from esysclk
-*/
-
-static struct clksrc_clk clk_cam = {
-	.clk	= {
-		.name		= "camif-upll",	/* same as 2440 name */
-		.id		= -1,
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
-};
-
-/* display-if
- *
- * display interface clock, divided from esysclk
-*/
-
-static struct clksrc_clk clk_display = {
-	.clk	= {
-		.name		= "display-if",
-		.id		= -1,
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
-};
-
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
-	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
-	.name		= "prediv",
-	.id		= -1,
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_prediv_getrate,
-	},
-};
-
 /* standard clock definitions */
 
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_h,
-	}, {
 		.name		= "sdi",
 		.id		= -1,
 		.parent		= &clk_p,
 		.enable		= s3c2443_clkcon_enable_p,
 		.ctrlbit	= S3C2443_PCLKCON_SDI,
 	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIC,
-	}, {
 		.name		= "iis",
 		.id		= -1,
 		.parent		= &clk_p,
@@ -537,179 +314,12 @@
 };
 
 static struct clk init_clocks[] = {
-	{
-		.name		= "dma",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA0,
-	}, {
-		.name		= "dma",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA1,
-	}, {
-		.name		= "dma",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA2,
-	}, {
-		.name		= "dma",
-		.id		= 3,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA3,
-	}, {
-		.name		= "dma",
-		.id		= 4,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA4,
-	}, {
-		.name		= "dma",
-		.id		= 5,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA5,
-	}, {
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBD,
-	}, {
-		.name		= "hsmmc",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_HSMMC,
-	}, {
-		.name		= "cfc",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_CFC,
-	}, {
-		.name		= "ssmc",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_SSMC,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART3,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_WDT,
-	}, {
-		.name		= "usb-bus-host",
-		.id		= -1,
-		.parent		= &clk_usb_bus_host.clk,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_AC97,
-	}
-};
-
-/* clocks to add where we need to check their parentage */
-
-static struct clksrc_clk __initdata *init_list[] = {
-	&clk_epllref, /* should be first */
-	&clk_esysclk,
-	&clk_msysclk,
-	&clk_arm,
-	&clk_i2s_eplldiv,
-	&clk_i2s,
-	&clk_cam,
-	&clk_uart,
-	&clk_display,
-	&clk_hsmmc_div,
-	&clk_usb_bus_host,
 };
 
-static void __init s3c2443_clk_initparents(void)
-{
-	int ptr;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_list); ptr++)
-		s3c_set_clksrc(init_list[ptr], true);
-}
-
-static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
-{
-	clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
-	return clkcon0 + 1;
-}
-
 /* clocks to add straight away */
 
 static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_usb_bus_host,
-	&clk_epllref,
-	&clk_esysclk,
-	&clk_msysclk,
 	&clk_arm,
-	&clk_uart,
-	&clk_display,
-	&clk_cam,
 	&clk_i2s_eplldiv,
 	&clk_i2s,
 	&clk_hsspi,
@@ -717,92 +327,32 @@
 };
 
 static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_usb_bus,
-	&clk_mpllref,
 	&clk_hsmmc,
 	&clk_armdiv,
-	&clk_prediv,
 };
 
 void __init_or_cpufreq s3c2443_setup_clocks(void)
 {
-	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long pll;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	pll = s3c2443_get_mpll(mpllcon, xtal);
-	clk_msysclk.clk.rate = pll;
-
-	fclk = pll / s3c2443_fclk_div(clkdiv0);
-	hclk = s3c2443_prediv_getrate(&clk_prediv);
-	hclk /= s3c2443_get_hdiv(clkdiv0);
- 	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-
-	printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
-	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
-	       print_mhz(pll), print_mhz(fclk),
-	       print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
+	s3c2443_common_setup_clocks(s3c2443_get_mpll, s3c2443_fclk_div);
 }
 
 void __init s3c2443_init_clocks(int xtal)
 {
-	struct clk *clkp;
 	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	int ret;
 	int ptr;
 
-	/* s3c2443 parents h and p clocks from prediv */
-	clk_h.parent = &clk_prediv;
-	clk_p.parent = &clk_prediv;
+	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
+	clk_epll.parent = &clk_epllref.clk;
 
-	s3c24xx_register_baseclocks(xtal);
-	s3c2443_setup_clocks();
-	s3c2443_clk_initparents();
+	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, s3c2443_fclk_div);
 
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
+	s3c2443_setup_clocks();
 
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_register_clksrc(clksrcs[ptr], 1);
 
-	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-	clk_epll.parent = &clk_epllref.clk;
-	clk_usb_bus.parent = &clk_usb_bus_host.clk;
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
-		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
-	}
-
-	printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
-	       print_mhz(clk_get_rate(&clk_epll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-
 	/* register clocks from clock array */
 
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
@@ -819,17 +369,8 @@
 
 	/* install (and disable) the clocks we do not need immediately */
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	s3c_pwmclk_init();
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2443/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-s3c2443/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2443/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2443/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -8,6 +8,7 @@
 	select S3C2443_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
 	select SAMSUNG_CLKSRC
+	select S3C2443_CLOCK
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c2443/mach-smdk2443.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c2443/mach-smdk2443.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c2443/mach-smdk2443.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c2443/mach-smdk2443.c	2010-08-01 18:11:14.000000000 -0400
@@ -131,7 +131,7 @@
 }
 
 MACHINE_START(SMDK2443, "SMDK2443")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C2410_SDRAM_PA + 0x100,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -88,6 +88,12 @@
 	.enable		= clk_48m_ctrl,
 };
 
+struct clk clk_xusbxti = {
+	.name		= "xusbxti",
+	.id		= -1,
+	.rate		= 48000000,
+};
+
 static int inline s3c64xx_gate(void __iomem *reg,
 				struct clk *clk,
 				int enable)
@@ -253,6 +259,12 @@
 		.enable		= s3c64xx_hclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
 	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_USB,
+	}, {
 		.name		= "timers",
 		.id		= -1,
 		.parent		= &clk_p,
@@ -518,6 +530,11 @@
 	.id		= -1,
 };
 
+static struct clk clk_iisv4_cd = {
+	.name		= "iis_cdclk_v4",
+	.id		= -1,
+};
+
 static struct clk clk_pcm_cd = {
 	.name		= "pcm_cdclk",
 	.id		= -1,
@@ -549,6 +566,19 @@
 	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
 };
 
+static struct clk *clkset_audio2_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_dout_mpll,
+	[2] = &clk_fin_epll,
+	[3] = &clk_iisv4_cd,
+	[4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio2 = {
+	.sources	= clkset_audio2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
+};
+
 static struct clk *clkset_camif_list[] = {
 	&clk_h2,
 };
@@ -652,6 +682,16 @@
 		.sources	= &clkset_audio1,
 	}, {
 		.clk	= {
+			.name		= "audio-bus",
+			.id		= -1,  /* There's only one IISv4 port */
+			.ctrlbit        = S3C6410_CLKCON_SCLK_AUDIO2,
+			.enable		= s3c64xx_sclk_ctrl,
+		},
+		.reg_src	= { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3  },
+		.reg_div	= { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4  },
+		.sources	= &clkset_audio2,
+	}, {
+		.clk	= {
 			.name		= "irda-bus",
 			.id		= 0,
 			.ctrlbit        = S3C_CLKCON_SCLK_IRDA,
@@ -749,6 +789,7 @@
 	&clk_ext_xtal_mux,
 	&clk_iis_cd0,
 	&clk_iis_cd1,
+	&clk_iisv4_cd,
 	&clk_pcm_cd,
 	&clk_mout_epll.clk,
 	&clk_mout_mpll.clk,
@@ -762,6 +803,7 @@
 	&clk_27m,
 	&clk_48m,
 	&clk_h2,
+	&clk_xusbxti,
 };
 
 /**
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/dev-adc.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/dev-adc.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/dev-adc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/dev-adc.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,46 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dev-adc.c
- *
- * Copyright 2010 Maurus Cuelenaere
- *
- * S3C64xx series device definition for ADC device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/adc.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_adc_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_ADC,
-		.end   = S3C64XX_PA_ADC + SZ_256 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TC,
-		.end   = IRQ_TC,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_ADC,
-		.end   = IRQ_ADC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device s3c_device_adc = {
-	.name		= "s3c64xx-adc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
-	.resource	= s3c_adc_resource,
-};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/dev-onenand1.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/dev-onenand1.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/dev-onenand1.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/dev-onenand1.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,55 @@
+/*
+ * linux/arch/arm/mach-s3c64xx/dev-onenand1.c
+ *
+ *  Copyright (c) 2008-2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S3C64XX series device definition for OneNAND devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+static struct resource s3c64xx_onenand1_resources[] = {
+	[0] = {
+		.start	= S3C64XX_PA_ONENAND1,
+		.end	= S3C64XX_PA_ONENAND1 + 0x400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= S3C64XX_PA_ONENAND1_BUF,
+		.end	= S3C64XX_PA_ONENAND1_BUF + S3C64XX_SZ_ONENAND1_BUF - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_ONENAND1,
+		.end	= IRQ_ONENAND1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c64xx_device_onenand1 = {
+	.name		= "samsung-onenand",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s3c64xx_onenand1_resources),
+	.resource	= s3c64xx_onenand1_resources,
+};
+
+void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
+{
+	struct onenand_platform_data *pd;
+
+	pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
+	if (!pd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	s3c64xx_device_onenand1.dev.platform_data = pd;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/dev-rtc.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/dev-rtc.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/dev-rtc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/dev-rtc.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,43 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dev-rtc.c
- *
- * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-static struct resource s3c_rtc_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_RTC,
-		.end   = S3C64XX_PA_RTC + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_RTC_ALARM,
-		.end   = IRQ_RTC_ALARM,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_RTC_TIC,
-		.end   = IRQ_RTC_TIC,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-struct platform_device s3c_device_rtc = {
-	.name		  = "s3c64xx-rtc",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_rtc_resource),
-	.resource	  = s3c_rtc_resource,
-};
-EXPORT_SYMBOL(s3c_device_rtc);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/dma.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/dma.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/dma.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -414,7 +414,7 @@
 EXPORT_SYMBOL(s3c2410_dma_enqueue);
 
 
-int s3c2410_dma_devconfig(int channel,
+int s3c2410_dma_devconfig(unsigned int channel,
 			  enum s3c2410_dmasrc source,
 			  unsigned long devaddr)
 {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/gpiolib.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/gpiolib.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/gpiolib.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/gpiolib.c	2010-08-01 18:11:14.000000000 -0400
@@ -51,6 +51,7 @@
 
 static struct s3c_gpio_cfg gpio_4bit_cfg_noint = {
 	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
 	.set_pull	= s3c_gpio_setpull_updown,
 	.get_pull	= s3c_gpio_getpull_updown,
 };
@@ -58,12 +59,14 @@
 static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = {
 	.cfg_eint	= 7,
 	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
 	.set_pull	= s3c_gpio_setpull_updown,
 	.get_pull	= s3c_gpio_getpull_updown,
 };
 
 static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
 	.cfg_eint	= 3,
+	.get_config	= s3c_gpio_getcfg_s3c64xx_4bit,
 	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
 	.set_pull	= s3c_gpio_setpull_updown,
 	.get_pull	= s3c_gpio_getpull_updown,
@@ -171,6 +174,7 @@
 
 static struct s3c_gpio_cfg gpio_2bit_cfg_noint = {
 	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.get_config	= s3c_gpio_getcfg_s3c24xx,
 	.set_pull	= s3c_gpio_setpull_updown,
 	.get_pull	= s3c_gpio_getpull_updown,
 };
@@ -178,6 +182,7 @@
 static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = {
 	.cfg_eint	= 2,
 	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.get_config	= s3c_gpio_getcfg_s3c24xx,
 	.set_pull	= s3c_gpio_setpull_updown,
 	.get_pull	= s3c_gpio_getpull_updown,
 };
@@ -185,6 +190,7 @@
 static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
 	.cfg_eint	= 3,
 	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.get_config	= s3c_gpio_getcfg_s3c24xx,
 	.set_pull	= s3c_gpio_setpull_updown,
 	.get_pull	= s3c_gpio_getpull_updown,
 };
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/include/mach/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -212,5 +212,9 @@
 
 #define NR_IRQS	(IRQ_BOARD_END + 1)
 
+/* Compatibility */
+
+#define IRQ_ONENAND	IRQ_ONENAND0
+
 #endif /* __ASM_MACH_S3C64XX_IRQS_H */
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/include/mach/map.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/include/mach/map.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/include/mach/map.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/include/mach/map.h	2010-08-01 18:11:14.000000000 -0400
@@ -52,6 +52,16 @@
 
 #define S3C64XX_PA_SROM		(0x70000000)
 
+#define S3C64XX_PA_ONENAND0	(0x70100000)
+#define S3C64XX_PA_ONENAND0_BUF	(0x20000000)
+#define S3C64XX_SZ_ONENAND0_BUF (SZ_64M)
+
+/* NAND and OneNAND1 controllers occupy the same register region
+   (depending on SoC POP version) */
+#define S3C64XX_PA_ONENAND1	(0x70200000)
+#define S3C64XX_PA_ONENAND1_BUF	(0x28000000)
+#define S3C64XX_SZ_ONENAND1_BUF	(SZ_64M)
+
 #define S3C64XX_PA_NAND		(0x70200000)
 #define S3C64XX_PA_FB		(0x77100000)
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
@@ -99,9 +109,16 @@
 #define S3C_PA_IIC		S3C64XX_PA_IIC0
 #define S3C_PA_IIC1		S3C64XX_PA_IIC1
 #define S3C_PA_NAND		S3C64XX_PA_NAND
+#define S3C_PA_ONENAND		S3C64XX_PA_ONENAND0
+#define S3C_PA_ONENAND_BUF	S3C64XX_PA_ONENAND0_BUF
+#define S3C_SZ_ONENAND_BUF	S3C64XX_SZ_ONENAND0_BUF
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
 #define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
+#define S3C_PA_RTC		S3C64XX_PA_RTC
+#define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
+
+#define SAMSUNG_PA_ADC		S3C64XX_PA_ADC
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/include/mach/pll.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/include/mach/pll.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/include/mach/pll.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/include/mach/pll.h	2010-08-01 18:11:14.000000000 -0400
@@ -20,6 +20,7 @@
 #define S3C6400_PLL_SDIV_SHIFT	(0)
 
 #include <asm/div64.h>
+#include <plat/pll6553x.h>
 
 static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
 					    u32 pllcon)
@@ -37,38 +38,8 @@
 	return (unsigned long)fvco;
 }
 
-#define S3C6400_EPLL_MDIV_MASK	((1 << (23-16)) - 1)
-#define S3C6400_EPLL_PDIV_MASK	((1 << (13-8)) - 1)
-#define S3C6400_EPLL_SDIV_MASK	((1 << (2-0)) - 1)
-#define S3C6400_EPLL_MDIV_SHIFT	(16)
-#define S3C6400_EPLL_PDIV_SHIFT	(8)
-#define S3C6400_EPLL_SDIV_SHIFT	(0)
-#define S3C6400_EPLL_KDIV_MASK  (0xffff)
-
 static inline unsigned long s3c6400_get_epll(unsigned long baseclk)
 {
-	unsigned long result;
-	u32 epll0 = __raw_readl(S3C_EPLL_CON0);
-	u32 epll1 = __raw_readl(S3C_EPLL_CON1);
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK;
-	pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK;
-	sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK;
-	kdiv = epll1 & S3C6400_EPLL_KDIV_MASK;
-
-	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
+	return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0),
+				__raw_readl(S3C_EPLL_CON1));
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/include/mach/regs-clock.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/include/mach/regs-clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/include/mach/regs-clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -33,6 +33,7 @@
 #define S3C_PCLK_GATE		S3C_CLKREG(0x34)
 #define S3C_SCLK_GATE		S3C_CLKREG(0x38)
 #define S3C_MEM0_GATE		S3C_CLKREG(0x3C)
+#define S3C6410_CLK_SRC2	S3C_CLKREG(0x10C)
 
 /* CLKDIV0 */
 #define S3C6400_CLKDIV0_PCLK_MASK	(0xf << 12)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -7,6 +7,7 @@
 config PLAT_S3C64XX
 	bool
 	depends on ARCH_S3C64XX
+	select SAMSUNG_WAKEMASK
 	default y
 	help
 	  Base platform code for any Samsung S3C64XX device
@@ -35,6 +36,11 @@
 	  Internal configuration for default SDHCI setup for S3C6400 and
 	  S3C6410 SoCs.
 
+config S3C64XX_DEV_ONENAND1
+	bool
+	help
+	  Compile in platform device definition for OneNAND1 controller
+
 # platform specific device setup
 
 config S3C64XX_SETUP_I2C0
@@ -85,12 +91,16 @@
 config MACH_SMDK6410
 	bool "SMDK6410"
 	select CPU_S3C6410
+	select SAMSUNG_DEV_ADC
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
 	select S3C_DEV_FB
+	select SAMSUNG_DEV_TS
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
+	select HAVE_S3C2410_WATCHDOG
 	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_FB_24BPP
@@ -178,3 +188,34 @@
 	select HAVE_PWM
 	help
 	  Machine support for the Airgoo HMT
+
+config MACH_SMARTQ
+	bool
+	select CPU_S3C6410
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_FB
+	select S3C_DEV_HWMON
+	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_USB_HOST
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_FB_24BPP
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select HAVE_PWM
+	help
+	    Shared machine support for SmartQ 5/7
+
+config MACH_SMARTQ5
+	bool "SmartQ 5"
+	select MACH_SMARTQ
+	help
+	    Machine support for the SmartQ 5
+
+config MACH_SMARTQ7
+	bool "SmartQ 7"
+	select MACH_SMARTQ
+	help
+	    Machine support for the SmartQ 7
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/mach-smartq5.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/mach-smartq5.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/mach-smartq5.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/mach-smartq5.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,185 @@
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-smartq5.c
+ *
+ * Copyright (C) 2010 Maurus Cuelenaere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c-gpio.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/s3c6410.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#include "mach-smartq.h"
+
+static void __init smartq5_lcd_setup_gpio(void)
+{
+	gpio_request(S3C64XX_GPM(0), "LCD SCEN pin");
+	gpio_request(S3C64XX_GPM(1), "LCD SCL pin");
+	gpio_request(S3C64XX_GPM(2), "LCD SDA pin");
+	gpio_request(S3C64XX_GPM(3), "LCD power");
+
+	/* turn power off */
+	gpio_direction_output(S3C64XX_GPM(0), 1);
+	gpio_direction_input(S3C64XX_GPM(1));
+	gpio_direction_input(S3C64XX_GPM(2));
+	gpio_direction_output(S3C64XX_GPM(3), 0);
+}
+
+static struct i2c_gpio_platform_data smartq5_lcd_control = {
+	.sda_pin		= S3C64XX_GPM(2),
+	.scl_pin		= S3C64XX_GPM(1),
+};
+
+static struct platform_device smartq5_lcd_control_device = {
+	.name			= "i2c-gpio",
+	.id			= 1,
+	.dev.platform_data	= &smartq5_lcd_control,
+};
+
+static struct gpio_led smartq5_leds[] __initdata = {
+	{
+		.name			= "smartq5:green",
+		.active_low		= 1,
+		.gpio			= S3C64XX_GPN(8),
+	},
+	{
+		.name			= "smartq5:red",
+		.active_low		= 1,
+		.gpio			= S3C64XX_GPN(9),
+	},
+};
+
+static struct gpio_led_platform_data smartq5_led_data = {
+	.num_leds = ARRAY_SIZE(smartq5_leds),
+	.leds = smartq5_leds,
+};
+
+static struct platform_device smartq5_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &smartq5_led_data,
+};
+
+/* Labels according to the SmartQ manual */
+static struct gpio_keys_button smartq5_buttons[] = {
+	{
+		.gpio			= S3C64XX_GPL(14),
+		.code			= KEY_POWER,
+		.desc			= "Power",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(2),
+		.code			= KEY_KPMINUS,
+		.desc			= "Minus",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(12),
+		.code			= KEY_KPPLUS,
+		.desc			= "Plus",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(15),
+		.code			= KEY_ENTER,
+		.desc			= "Move",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data smartq5_buttons_data  = {
+	.buttons	= smartq5_buttons,
+	.nbuttons	= ARRAY_SIZE(smartq5_buttons),
+};
+
+static struct platform_device smartq5_buttons_device  = {
+	.name		= "gpio-keys",
+	.id		= 0,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &smartq5_buttons_data,
+	}
+};
+
+static struct s3c_fb_pd_win smartq5_fb_win0 = {
+	.win_mode	= {
+		.pixclock	= 1000000000000ULL /
+				((40+1+216+800)*(10+1+35+480)*80),
+		.left_margin	= 40,
+		.right_margin	= 216,
+		.upper_margin	= 10,
+		.lower_margin	= 35,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &smartq5_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+			  VIDCON1_INV_VDEN,
+};
+
+static struct platform_device *smartq5_devices[] __initdata = {
+	&smartq5_leds_device,
+	&smartq5_buttons_device,
+	&smartq5_lcd_control_device,
+};
+
+static void __init smartq5_machine_init(void)
+{
+	s3c_fb_set_platdata(&smartq5_lcd_pdata);
+
+	smartq_machine_init();
+	smartq5_lcd_setup_gpio();
+
+	platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
+}
+
+MACHINE_START(SMARTQ5, "SmartQ 5")
+	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= smartq_map_io,
+	.init_machine	= smartq5_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/mach-smartq7.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/mach-smartq7.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/mach-smartq7.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/mach-smartq7.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,201 @@
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-smartq7.c
+ *
+ * Copyright (C) 2010 Maurus Cuelenaere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c-gpio.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/s3c6410.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#include "mach-smartq.h"
+
+static void __init smartq7_lcd_setup_gpio(void)
+{
+	gpio_request(S3C64XX_GPM(0), "LCD CSB pin");
+	gpio_request(S3C64XX_GPM(3), "LCD power");
+	gpio_request(S3C64XX_GPM(4), "LCD power status");
+
+	/* turn power off */
+	gpio_direction_output(S3C64XX_GPM(0), 1);
+	gpio_direction_output(S3C64XX_GPM(3), 0);
+	gpio_direction_input(S3C64XX_GPM(4));
+}
+
+static struct i2c_gpio_platform_data smartq7_lcd_control = {
+	.sda_pin		= S3C64XX_GPM(2),
+	.scl_pin		= S3C64XX_GPM(1),
+	.sda_is_open_drain	= 1,
+	.scl_is_open_drain	= 1,
+};
+
+static struct platform_device smartq7_lcd_control_device = {
+	.name			= "i2c-gpio",
+	.id			= 1,
+	.dev.platform_data	= &smartq7_lcd_control,
+};
+
+static struct gpio_led smartq7_leds[] __initdata = {
+	{
+		.name			= "smartq7:red",
+		.active_low		= 1,
+		.gpio			= S3C64XX_GPN(8),
+	},
+	{
+		.name			= "smartq7:green",
+		.active_low		= 1,
+		.gpio			= S3C64XX_GPN(9),
+	},
+};
+
+static struct gpio_led_platform_data smartq7_led_data = {
+	.num_leds = ARRAY_SIZE(smartq7_leds),
+	.leds = smartq7_leds,
+};
+
+static struct platform_device smartq7_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &smartq7_led_data,
+};
+
+/* Labels according to the SmartQ manual */
+static struct gpio_keys_button smartq7_buttons[] = {
+	{
+		.gpio			= S3C64XX_GPL(14),
+		.code			= KEY_POWER,
+		.desc			= "Power",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(2),
+		.code			= KEY_FN,
+		.desc			= "Function",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(3),
+		.code			= KEY_KPMINUS,
+		.desc			= "Minus",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(4),
+		.code			= KEY_KPPLUS,
+		.desc			= "Plus",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(12),
+		.code			= KEY_ENTER,
+		.desc			= "Enter",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+	{
+		.gpio			= S3C64XX_GPN(15),
+		.code			= KEY_ESC,
+		.desc			= "Cancel",
+		.active_low		= 1,
+		.debounce_interval	= 5,
+		.type                   = EV_KEY,
+	},
+};
+
+static struct gpio_keys_platform_data smartq7_buttons_data  = {
+	.buttons	= smartq7_buttons,
+	.nbuttons	= ARRAY_SIZE(smartq7_buttons),
+};
+
+static struct platform_device smartq7_buttons_device  = {
+	.name		= "gpio-keys",
+	.id		= 0,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &smartq7_buttons_data,
+	}
+};
+
+static struct s3c_fb_pd_win smartq7_fb_win0 = {
+	.win_mode	= {
+		.pixclock	= 1000000000000ULL /
+				((3+10+5+800)*(1+3+20+480)*80),
+		.left_margin	= 3,
+		.right_margin	= 5,
+		.upper_margin	= 1,
+		.lower_margin	= 20,
+		.hsync_len	= 10,
+		.vsync_len	= 3,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &smartq7_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+			  VIDCON1_INV_VCLK,
+};
+
+static struct platform_device *smartq7_devices[] __initdata = {
+	&smartq7_leds_device,
+	&smartq7_buttons_device,
+	&smartq7_lcd_control_device,
+};
+
+static void __init smartq7_machine_init(void)
+{
+	s3c_fb_set_platdata(&smartq7_lcd_pdata);
+
+	smartq_machine_init();
+	smartq7_lcd_setup_gpio();
+
+	platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
+}
+
+MACHINE_START(SMARTQ7, "SmartQ 7")
+	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= smartq_map_io,
+	.init_machine	= smartq7_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/mach-smartq.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/mach-smartq.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/mach-smartq.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/mach-smartq.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,363 @@
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-smartq.c
+ *
+ * Copyright (C) 2010 Maurus Cuelenaere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/serial_core.h>
+#include <linux/usb/gpio_vbus.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+#include <plat/hwmon.h>
+#include <plat/regs-serial.h>
+#include <plat/udc-hs.h>
+#include <plat/usb-control.h>
+#include <plat/sdhci.h>
+#include <plat/ts.h>
+
+#include <video/platform_lcd.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static void smartq_usb_host_powercontrol(int port, int to)
+{
+	pr_debug("%s(%d, %d)\n", __func__, port, to);
+
+	if (port == 0) {
+		gpio_set_value(S3C64XX_GPL(0), to);
+		gpio_set_value(S3C64XX_GPL(1), to);
+	}
+}
+
+static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw)
+{
+	struct s3c2410_hcd_info *info = pw;
+
+	if (gpio_get_value(S3C64XX_GPL(10)) == 0) {
+		pr_debug("%s: over-current irq (oc detected)\n", __func__);
+		s3c2410_usb_report_oc(info, 3);
+	} else {
+		pr_debug("%s: over-current irq (oc cleared)\n", __func__);
+		s3c2410_usb_report_oc(info, 0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)
+{
+	int ret;
+
+	/* This isn't present on a SmartQ 5 board */
+	if (machine_is_smartq5())
+		return;
+
+	if (on) {
+		ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)),
+				  smartq_usb_host_ocirq, IRQF_DISABLED |
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				  "USB host overcurrent", info);
+		if (ret != 0)
+			pr_err("failed to request usb oc irq: %d\n", ret);
+	} else {
+		free_irq(gpio_to_irq(S3C64XX_GPL(10)), info);
+	}
+}
+
+static struct s3c2410_hcd_info smartq_usb_host_info = {
+	.port[0]	= {
+		.flags	= S3C_HCDFLG_USED
+	},
+	.port[1]	= {
+		.flags	= 0
+	},
+
+	.power_control	= smartq_usb_host_powercontrol,
+	.enable_oc	= smartq_usb_host_enableoc,
+};
+
+static struct gpio_vbus_mach_info smartq_usb_otg_vbus_pdata = {
+	.gpio_vbus		= S3C64XX_GPL(9),
+	.gpio_pullup		= -1,
+	.gpio_vbus_inverted	= true,
+};
+
+static struct platform_device smartq_usb_otg_vbus_dev = {
+	.name			= "gpio-vbus",
+	.dev.platform_data	= &smartq_usb_otg_vbus_pdata,
+};
+
+static int __init smartq_bl_init(struct device *dev)
+{
+    s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
+
+    return 0;
+}
+
+static struct platform_pwm_backlight_data smartq_backlight_data = {
+	.pwm_id		= 1,
+	.max_brightness	= 1000,
+	.dft_brightness	= 600,
+	.pwm_period_ns	= 1000000000 / (1000 * 20),
+	.init		= smartq_bl_init,
+};
+
+static struct platform_device smartq_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &s3c_device_timer[1].dev,
+		.platform_data = &smartq_backlight_data,
+	},
+};
+
+static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = {
+	.delay			= 65535,
+	.presc			= 99,
+	.oversampling_shift	= 4,
+};
+
+static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
+	.max_width		= 4,
+	/*.broken_card_detection	= true,*/
+};
+
+static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
+	/* Battery voltage (?-4.2V) */
+	.in[0] = &(struct s3c_hwmon_chcfg) {
+		.name		= "smartq:battery-voltage",
+		.mult		= 3300,
+		.div		= 2048,
+	},
+	/* Reference voltage (1.2V) */
+	.in[1] = &(struct s3c_hwmon_chcfg) {
+		.name		= "smartq:reference-voltage",
+		.mult		= 3300,
+		.div		= 4096,
+	},
+};
+
+static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
+{
+	gpio_direction_output(S3C64XX_GPM(3), power);
+}
+
+static struct plat_lcd_data smartq_lcd_power_data = {
+	.set_power	= smartq_lcd_power_set,
+};
+
+static struct platform_device smartq_lcd_power_device = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smartq_lcd_power_data,
+};
+
+
+static struct platform_device *smartq_devices[] __initdata = {
+	&s3c_device_hsmmc1,	/* Init iNAND first, ... */
+	&s3c_device_hsmmc0,	/* ... then the external SD card */
+	&s3c_device_hsmmc2,
+	&s3c_device_adc,
+	&s3c_device_fb,
+	&s3c_device_hwmon,
+	&s3c_device_i2c0,
+	&s3c_device_ohci,
+	&s3c_device_rtc,
+	&s3c_device_timer[1],
+	&s3c_device_ts,
+	&s3c_device_usb_hsotg,
+	&smartq_backlight_device,
+	&smartq_lcd_power_device,
+	&smartq_usb_otg_vbus_dev,
+};
+
+static void __init smartq_lcd_mode_set(void)
+{
+	u32 tmp;
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+static void smartq_power_off(void)
+{
+	gpio_direction_output(S3C64XX_GPK(15), 1);
+}
+
+static int __init smartq_power_off_init(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPK(15), "Power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPK15\n", __func__);
+		return ret;
+	}
+
+	/* leave power on */
+	gpio_direction_output(S3C64XX_GPK(15), 0);
+
+
+	pm_power_off = smartq_power_off;
+
+	return ret;
+}
+
+static int __init smartq_usb_host_init(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPL(0), "USB power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPL0\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C64XX_GPL(1), "USB host power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPL1\n", __func__);
+		goto err;
+	}
+
+	if (!machine_is_smartq5()) {
+		/* This isn't present on a SmartQ 5 board */
+		ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent");
+		if (ret < 0) {
+			pr_err("%s: failed to get GPL10\n", __func__);
+			goto err2;
+		}
+	}
+
+	/* turn power off */
+	gpio_direction_output(S3C64XX_GPL(0), 0);
+	gpio_direction_output(S3C64XX_GPL(1), 0);
+	if (!machine_is_smartq5())
+		gpio_direction_input(S3C64XX_GPL(10));
+
+	s3c_device_ohci.dev.platform_data = &smartq_usb_host_info;
+
+	return 0;
+
+err2:
+	gpio_free(S3C64XX_GPL(1));
+err:
+	gpio_free(S3C64XX_GPL(0));
+	return ret;
+}
+
+static int __init smartq_usb_otg_init(void)
+{
+	clk_xusbxti.rate = 12000000;
+
+	return 0;
+}
+
+static int __init smartq_wifi_init(void)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPK(1), "wifi control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPK1\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C64XX_GPK(2), "wifi reset");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPK2\n", __func__);
+		gpio_free(S3C64XX_GPK(1));
+		return ret;
+	}
+
+	/* turn power on */
+	gpio_direction_output(S3C64XX_GPK(1), 1);
+
+	/* reset device */
+	gpio_direction_output(S3C64XX_GPK(2), 0);
+	mdelay(100);
+	gpio_set_value(S3C64XX_GPK(2), 1);
+	gpio_direction_input(S3C64XX_GPK(2));
+
+	return 0;
+}
+
+static struct map_desc smartq_iodesc[] __initdata = {};
+void __init smartq_map_io(void)
+{
+	s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
+
+	smartq_lcd_mode_set();
+}
+
+void __init smartq_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
+	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
+	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
+	s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
+
+	WARN_ON(smartq_power_off_init());
+	WARN_ON(smartq_usb_host_init());
+	WARN_ON(smartq_usb_otg_init());
+	WARN_ON(smartq_wifi_init());
+
+	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/mach-smartq.h linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/mach-smartq.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/mach-smartq.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/mach-smartq.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,20 @@
+/*
+ * linux/arch/arm/mach-s3c64xx/mach-smartq.h
+ *
+ * Copyright (C) 2010 Maurus Cuelenaere
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __MACH_SMARTQ_H
+#define __MACH_SMARTQ_H __FILE__
+
+#include <linux/init.h>
+
+extern void __init smartq_map_io(void);
+extern void __init smartq_machine_init(void);
+
+#endif /* __MACH_SMARTQ_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/mach-smdk6400.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/mach-smdk6400.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/mach-smdk6400.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/mach-smdk6400.c	2010-08-01 18:11:14.000000000 -0400
@@ -84,7 +84,7 @@
 }
 
 MACHINE_START(SMDK6400, "SMDK6400")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C_PA_UART & 0xfff00000,
 	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/mach-smdk6410.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/mach-smdk6410.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/mach-smdk6410.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/mach-smdk6410.c	2010-08-01 18:11:14.000000000 -0400
@@ -64,6 +64,8 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -262,6 +264,9 @@
 	&smdk6410_lcd_powerdev,
 
 	&smdk6410_smsc911x,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&s3c_device_wdt,
 };
 
 #ifdef CONFIG_REGULATOR
@@ -596,6 +601,12 @@
 	{ I2C_BOARD_INFO("24c128", 0x57), },	/* Samsung S524AD0XD1 */
 };
 
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
 static void __init smdk6410_map_io(void)
 {
 	u32 tmp;
@@ -625,6 +636,8 @@
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
 
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
 	/* configure nCS1 width to 16 bits */
 
 	cs1 = __raw_readl(S3C64XX_SROM_BW) &
@@ -656,7 +669,7 @@
 }
 
 MACHINE_START(SMDK6410, "SMDK6410")
-	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.phys_io	= S3C_PA_UART & 0xfff00000,
 	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -52,11 +52,14 @@
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
 obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
 obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
+obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o
+obj-$(CONFIG_MACH_SMARTQ5)	+= mach-smartq5.o
+obj-$(CONFIG_MACH_SMARTQ7)	+= mach-smartq7.o
 
 # device support
 
 obj-y				+= dev-uart.o
-obj-y				+= dev-rtc.o
 obj-y				+= dev-audio.o
-obj-$(CONFIG_S3C_ADC)		+= dev-adc.o
 obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+obj-$(CONFIG_S3C64XX_DEV_TS)	+= dev-ts.o
+obj-$(CONFIG_S3C64XX_DEV_ONENAND1)	+= dev-onenand1.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/pm.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/pm.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/pm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/pm.c	2010-08-01 18:11:14.000000000 -0400
@@ -18,8 +18,11 @@
 #include <linux/io.h>
 
 #include <mach/map.h>
+#include <mach/irqs.h>
 
 #include <plat/pm.h>
+#include <plat/wakeup-mask.h>
+
 #include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
@@ -153,8 +156,25 @@
 	panic("sleep resumed to originator?");
 }
 
+/* mapping of interrupts to parts of the wakeup mask */
+static struct samsung_wakeup_mask wake_irqs[] = {
+	{ .irq = IRQ_RTC_ALARM,	.bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
+	{ .irq = IRQ_RTC_TIC,	.bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
+	{ .irq = IRQ_PENDN,	.bit = S3C64XX_PWRCFG_TS_DISABLE, },
+	{ .irq = IRQ_HSMMC0,	.bit = S3C64XX_PWRCFG_MMC0_DISABLE, },
+	{ .irq = IRQ_HSMMC1,	.bit = S3C64XX_PWRCFG_MMC1_DISABLE, },
+	{ .irq = IRQ_HSMMC2,	.bit = S3C64XX_PWRCFG_MMC2_DISABLE, },
+	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_BATF_DISABLE},
+	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_MSM_DISABLE },
+	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_HSI_DISABLE },
+	{ .irq = NO_WAKEUP_IRQ,	.bit = S3C64XX_PWRCFG_MSM_DISABLE },
+};
+
 static void s3c64xx_pm_prepare(void)
 {
+	samsung_sync_wakemask(S3C64XX_PWR_CFG,
+			      wake_irqs, ARRAY_SIZE(wake_irqs));
+
 	/* store address of resume. */
 	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/s3c6400.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/s3c6400.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/s3c6400.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/s3c6400.c	2010-08-01 18:11:14.000000000 -0400
@@ -37,6 +37,7 @@
 #include <plat/clock.h>
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
+#include <plat/onenand-core.h>
 #include <mach/s3c6400.h>
 
 void __init s3c6400_map_io(void)
@@ -51,6 +52,9 @@
 	s3c_i2c0_setname("s3c2440-i2c");
 
 	s3c_device_nand.name = "s3c6400-nand";
+
+	s3c_onenand_setname("s3c6400-onenand");
+	s3c64xx_onenand1_setname("s3c6400-onenand");
 }
 
 void __init s3c6400_init_clocks(int xtal)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/s3c6410.c linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/s3c6410.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s3c64xx/s3c6410.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s3c64xx/s3c6410.c	2010-08-01 18:11:14.000000000 -0400
@@ -38,6 +38,8 @@
 #include <plat/clock.h>
 #include <plat/sdhci.h>
 #include <plat/iic-core.h>
+#include <plat/adc.h>
+#include <plat/onenand-core.h>
 #include <mach/s3c6400.h>
 #include <mach/s3c6410.h>
 
@@ -52,7 +54,10 @@
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
 
+	s3c_device_adc.name	= "s3c64xx-adc";
 	s3c_device_nand.name = "s3c6400-nand";
+	s3c_onenand_setname("s3c6410-onenand");
+	s3c64xx_onenand1_setname("s3c6410-onenand");
 }
 
 void __init s3c6410_init_clocks(int xtal)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -134,24 +134,6 @@
 	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 },
 };
 
-static struct clk clk_h_low = {
-	.name		= "hclk_low",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.ops		= &clk_ops_def_setrate,
-};
-
-static struct clk clk_p_low = {
-	.name		= "pclk_low",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.ops		= &clk_ops_def_setrate,
-};
-
 enum perf_level {
 	L0 = 532*1000,
 	L1 = 266*1000,
@@ -247,23 +229,70 @@
 	.round_rate	= s5p6440_armclk_round_rate,
 };
 
-static unsigned long s5p6440_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
+static struct clksrc_clk clk_armclk = {
+	.clk	= {
+		.name	= "armclk",
+		.id	= 1,
+		.parent	= &clk_mout_apll.clk,
+		.ops	= &s5p6440_clkarm_ops,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 0, .size = 4 },
+};
 
-	if (__raw_readl(S5P_CLK_DIV0) & S5P_CLKDIV0_MPLL_MASK)
-		rate /= 2;
+static struct clksrc_clk clk_dout_mpll = {
+	.clk	= {
+		.name	= "dout_mpll",
+		.id	= -1,
+		.parent	= &clk_mout_mpll.clk,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 4, .size = 1 },
+};
 
-	return rate;
-}
+static struct clksrc_clk clk_hclk = {
+	.clk	= {
+		.name	= "clk_hclk",
+		.id	= -1,
+		.parent	= &clk_armclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 8, .size = 4 },
+};
 
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.ops            = &(struct clk_ops) {
-		.get_rate	= s5p6440_clk_doutmpll_get_rate,
+static struct clksrc_clk clk_pclk = {
+	.clk	= {
+		.name	= "clk_pclk",
+		.id	= -1,
+		.parent	= &clk_hclk.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 4 },
+};
+
+static struct clk *clkset_hclklow_list[] = {
+	&clk_mout_apll.clk,
+	&clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_hclklow = {
+	.sources	= clkset_hclklow_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hclklow_list),
+};
+
+static struct clksrc_clk clk_hclk_low = {
+	.clk = {
+		.name	= "hclk_low",
+		.id	= -1,
 	},
+	.sources	= &clkset_hclklow,
+	.reg_src	= { .reg = S5P_SYS_OTHERS, .shift = 6, .size = 1 },
+	.reg_div	= { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+	.clk	= {
+		.name	= "pclk_low",
+		.id	= -1,
+		.parent	= &clk_hclk_low.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
 };
 
 int s5p6440_clk48m_ctrl(struct clk *clk, int enable)
@@ -307,6 +336,11 @@
 	return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable);
 }
 
+static int s5p6440_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_GATE_SCLK1, clk, enable);
+}
+
 static int s5p6440_mem_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable);
@@ -321,37 +355,37 @@
 	{
 		.name		= "nand",
 		.id		= -1,
-		.parent		= &clk_h,
+		.parent		= &clk_hclk.clk,
 		.enable		= s5p6440_mem_ctrl,
 		.ctrlbit	= S5P_CLKCON_MEM0_HCLK_NFCON,
 	}, {
 		.name		= "adc",
 		.id		= -1,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_TSADC,
 	}, {
 		.name		= "i2c",
 		.id		= -1,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_IIC0,
 	}, {
 		.name		= "i2s_v40",
 		.id		= 0,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_IIS2,
 	}, {
 		.name		= "spi",
 		.id		= 0,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_SPI0,
 	}, {
 		.name		= "spi",
 		.id		= 1,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_SPI1,
 	}, {
@@ -387,58 +421,124 @@
 	}, {
 		.name    	= "otg",
 		.id	   	= -1,
-		.parent  	= &clk_h_low,
+		.parent		= &clk_hclk_low.clk,
 		.enable  	= s5p6440_hclk0_ctrl,
 		.ctrlbit 	= S5P_CLKCON_HCLK0_USB
 	}, {
 		.name    	= "post",
 		.id	   	= -1,
-		.parent  	= &clk_h_low,
+		.parent		= &clk_hclk_low.clk,
 		.enable  	= s5p6440_hclk0_ctrl,
 		.ctrlbit 	= S5P_CLKCON_HCLK0_POST0
 	}, {
 		.name		= "lcd",
 		.id		= -1,
-		.parent		= &clk_h_low,
+		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p6440_hclk1_ctrl,
 		.ctrlbit	= S5P_CLKCON_HCLK1_DISPCON,
 	}, {
 		.name		= "hsmmc",
 		.id		= 0,
-		.parent		= &clk_h_low,
+		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p6440_hclk0_ctrl,
 		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC0,
 	}, {
 		.name		= "hsmmc",
 		.id		= 1,
-		.parent		= &clk_h_low,
+		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p6440_hclk0_ctrl,
 		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC1,
 	}, {
 		.name		= "hsmmc",
 		.id		= 2,
-		.parent		= &clk_h_low,
+		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p6440_hclk0_ctrl,
 		.ctrlbit	= S5P_CLKCON_HCLK0_HSMMC2,
 	}, {
 		.name		= "rtc",
 		.id		= -1,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_RTC,
 	}, {
 		.name		= "watchdog",
 		.id		= -1,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_WDT,
 	}, {
 		.name		= "timers",
 		.id		= -1,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_PWM,
-	}
+	}, {
+		.name		= "hclk_fimgvg",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p6440_hclk1_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "tsi",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p6440_hclk1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "pclk_fimgvg",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= (1 << 31),
+	}, {
+		.name		= "dmc0",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= (1 << 30),
+	}, {
+		.name		= "etm",
+		.id		= -1,
+		.parent		= &clk_pclk.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= (1 << 29),
+	}, {
+		.name		= "dsim",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= (1 << 28),
+	}, {
+		.name		= "gps",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "pcm",
+		.id		= -1,
+		.parent		= &clk_pclk_low.clk,
+		.enable		= s5p6440_pclk_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "irom",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "dma",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "2d",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= (1 << 8),
+	},
 };
 
 /*
@@ -448,34 +548,46 @@
 	{
 		.name		= "gpio",
 		.id		= -1,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_GPIO,
 	}, {
 		.name		= "uart",
 		.id		= 0,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_UART0,
 	}, {
 		.name		= "uart",
 		.id		= 1,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_UART1,
 	}, {
 		.name		= "uart",
 		.id		= 2,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_UART2,
 	}, {
 		.name		= "uart",
 		.id		= 3,
-		.parent		= &clk_p_low,
+		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p6440_pclk_ctrl,
 		.ctrlbit	= S5P_CLKCON_PCLK_UART3,
-	}
+	}, {
+		.name		= "mem",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= (1 << 21),
+	}, {
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hclk.clk,
+		.enable		= s5p6440_hclk0_ctrl,
+		.ctrlbit	= (1 << 1),
+	},
 };
 
 static struct clk clk_iis_cd_v40 = {
@@ -488,20 +600,20 @@
 	.id		= -1,
 };
 
-static struct clk *clkset_spi_mmc_list[] = {
+static struct clk *clkset_group1_list[] = {
 	&clk_mout_epll.clk,
-	&clk_dout_mpll,
+	&clk_dout_mpll.clk,
 	&clk_fin_epll,
 };
 
-static struct clksrc_sources clkset_spi_mmc = {
-	.sources	= clkset_spi_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_mmc_list),
+static struct clksrc_sources clkset_group1 = {
+	.sources	= clkset_group1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
 };
 
 static struct clk *clkset_uart_list[] = {
 	&clk_mout_epll.clk,
-	&clk_dout_mpll
+	&clk_dout_mpll.clk,
 };
 
 static struct clksrc_sources clkset_uart = {
@@ -509,6 +621,19 @@
 	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
 };
 
+static struct clk *clkset_audio_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll.clk,
+	&clk_fin_epll,
+	&clk_iis_cd_v40,
+	&clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio = {
+	.sources	= clkset_audio_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio_list),
+};
+
 static struct clksrc_clk clksrcs[] = {
 	{
 		.clk	= {
@@ -517,7 +642,7 @@
 			.ctrlbit        = S5P_CLKCON_SCLK0_MMC0,
 			.enable		= s5p6440_sclk_ctrl,
 		},
-		.sources = &clkset_spi_mmc,
+		.sources = &clkset_group1,
 		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 },
 		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 },
 	}, {
@@ -527,7 +652,7 @@
 			.ctrlbit        = S5P_CLKCON_SCLK0_MMC1,
 			.enable		= s5p6440_sclk_ctrl,
 		},
-		.sources = &clkset_spi_mmc,
+		.sources = &clkset_group1,
 		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 },
 		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 },
 	}, {
@@ -537,7 +662,7 @@
 			.ctrlbit        = S5P_CLKCON_SCLK0_MMC2,
 			.enable		= s5p6440_sclk_ctrl,
 		},
-		.sources = &clkset_spi_mmc,
+		.sources = &clkset_group1,
 		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 },
 		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 },
 	}, {
@@ -557,7 +682,7 @@
 			.ctrlbit        = S5P_CLKCON_SCLK0_SPI0,
 			.enable		= s5p6440_sclk_ctrl,
 		},
-		.sources = &clkset_spi_mmc,
+		.sources = &clkset_group1,
 		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 },
 		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
 	}, {
@@ -567,17 +692,63 @@
 			.ctrlbit        = S5P_CLKCON_SCLK0_SPI1,
 			.enable		= s5p6440_sclk_ctrl,
 		},
-		.sources = &clkset_spi_mmc,
+		.sources = &clkset_group1,
 		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 },
 		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
-	}
+	}, {
+		.clk	= {
+			.name		= "sclk_post",
+			.id		= -1,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 26, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_dispcon",
+			.id		= -1,
+			.ctrlbit	= (1 << 1),
+			.enable		= s5p6440_sclk1_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimgvg",
+			.id		= -1,
+			.ctrlbit	= (1 << 2),
+			.enable		= s5p6440_sclk1_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_audio2",
+			.id		= -1,
+			.ctrlbit	= (1 << 11),
+			.enable		= s5p6440_sclk_ctrl,
+		},
+		.sources = &clkset_audio,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 24, .size = 4 },
+	},
 };
 
 /* Clock initialisation code */
-static struct clksrc_clk *init_parents[] = {
+static struct clksrc_clk *sysclks[] = {
 	&clk_mout_apll,
 	&clk_mout_epll,
 	&clk_mout_mpll,
+	&clk_dout_mpll,
+	&clk_armclk,
+	&clk_hclk,
+	&clk_pclk,
+	&clk_hclk_low,
+	&clk_pclk_low,
 };
 
 void __init_or_cpufreq s5p6440_setup_clocks(void)
@@ -593,21 +764,13 @@
 	unsigned long apll;
 	unsigned long mpll;
 	unsigned int ptr;
-	u32 clkdiv0;
-	u32 clkdiv3;
 
 	/* Set S5P6440 functions for clk_fout_epll */
 	clk_fout_epll.enable = s5p6440_epll_enable;
 	clk_fout_epll.ops = &s5p6440_epll_ops;
 
-	/* Set S5P6440 functions for arm clock */
-	clk_arm.parent = &clk_mout_apll.clk;
-	clk_arm.ops = &s5p6440_clkarm_ops;
 	clk_48m.enable = s5p6440_clk48m_ctrl;
 
-	clkdiv0 = __raw_readl(S5P_CLK_DIV0);
-	clkdiv3 = __raw_readl(S5P_CLK_DIV3);
-
 	xtal_clk = clk_get(NULL, "ext_xtal");
 	BUG_ON(IS_ERR(xtal_clk));
 
@@ -619,41 +782,28 @@
 	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
 	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502);
 
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
 	printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
 			" E=%ld.%ldMHz\n",
 			print_mhz(apll), print_mhz(mpll), print_mhz(epll));
 
-	fclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_ARM);
-	hclk = fclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK);
-	pclk = hclk / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK);
-
-	if (__raw_readl(S5P_OTHERS) & S5P_OTHERS_HCLK_LOW_SEL_MPLL) {
-		/* Asynchronous mode */
-		hclk_low = mpll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW);
-	} else {
-		/* Synchronous mode */
-		hclk_low = apll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW);
-	}
-
-	pclk_low = hclk_low / GET_DIV(clkdiv3, S5P_CLKDIV3_PCLK_LOW);
+	fclk = clk_get_rate(&clk_armclk.clk);
+	hclk = clk_get_rate(&clk_hclk.clk);
+	pclk = clk_get_rate(&clk_pclk.clk);
+	hclk_low = clk_get_rate(&clk_hclk_low.clk);
+	pclk_low = clk_get_rate(&clk_pclk_low.clk);
 
 	printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
 			" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
 			print_mhz(hclk), print_mhz(hclk_low),
 			print_mhz(pclk), print_mhz(pclk_low));
 
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
-
 	clk_f.rate = fclk;
 	clk_h.rate = hclk;
 	clk_p.rate = pclk;
-	clk_h_low.rate = hclk_low;
-	clk_p_low.rate = pclk_low;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c_set_clksrc(init_parents[ptr], true);
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_set_clksrc(&clksrcs[ptr], true);
@@ -661,13 +811,8 @@
 
 static struct clk *clks[] __initdata = {
 	&clk_ext,
-	&clk_mout_epll.clk,
-	&clk_mout_mpll.clk,
-	&clk_dout_mpll,
 	&clk_iis_cd_v40,
 	&clk_pcm_cd,
-	&clk_p_low,
-	&clk_h_low,
 };
 
 void __init s5p6440_register_clocks(void)
@@ -680,6 +825,9 @@
 	if (ret > 0)
 		printk(KERN_ERR "Failed to register %u clocks\n", ret);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/cpu.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/cpu.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/cpu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/cpu.c	2010-08-01 18:11:14.000000000 -0400
@@ -61,6 +61,7 @@
 void __init s5p6440_map_io(void)
 {
 	/* initialize any device information early */
+	s3c_device_adc.name	= "s3c64xx-adc";
 }
 
 void __init s5p6440_init_clocks(int xtal)
@@ -88,7 +89,7 @@
 	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
 
-static struct sysdev_class s5p6440_sysclass = {
+struct sysdev_class s5p6440_sysclass = {
 	.name	= "s5p6440-core",
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/dev-audio.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/dev-audio.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/dev-audio.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/dev-audio.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,127 @@
+/* linux/arch/arm/mach-s5p6440/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5p6440_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case -1:
+		s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5));
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+	.cfg_gpio = s5p6440_cfg_i2s,
+};
+
+static struct resource s5p6440_iis0_resource[] = {
+	[0] = {
+		.start = S5P6440_PA_I2S,
+		.end   = S5P6440_PA_I2S + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_TX,
+		.end   = DMACH_I2S0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_RX,
+		.end   = DMACH_I2S0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_iis = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5p6440_iis0_resource),
+	.resource	  = s5p6440_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2));
+		break;
+
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+	.cfg_gpio = s5p6440_pcm_cfg_gpio,
+};
+
+static struct resource s5p6440_pcm0_resource[] = {
+	[0] = {
+		.start = S5P6440_PA_PCM,
+		.end   = S5P6440_PA_PCM + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6440_device_pcm = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5p6440_pcm0_resource),
+	.resource	  = s5p6440_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/dev-spi.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/dev-spi.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/dev-spi.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/dev-spi.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,176 @@
+/* linux/arch/arm/mach-s5p6440/dev-spi.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+
+static char *spi_src_clks[] = {
+	[S5P6440_SPI_SRCCLK_PCLK] = "pclk",
+	[S5P6440_SPI_SRCCLK_SCLK] = "spi_epll",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the CS.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s5p6440_spi0_resource[] = {
+	[0] = {
+		.start = S5P6440_PA_SPI0,
+		.end   = S5P6440_PA_SPI0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
+	.cfg_gpio = s5p6440_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x1ff,
+	.rx_lvl_offset = 15,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p6440_device_spi0 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5p6440_spi0_resource),
+	.resource	  = s5p6440_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5p6440_spi0_pdata,
+	},
+};
+
+static struct resource s5p6440_spi1_resource[] = {
+	[0] = {
+		.start = S5P6440_PA_SPI1,
+		.end   = S5P6440_PA_SPI1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI1_TX,
+		.end   = DMACH_SPI1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI1_RX,
+		.end   = DMACH_SPI1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
+	.cfg_gpio = s5p6440_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 15,
+};
+
+struct platform_device s5p6440_device_spi1 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5p6440_spi1_resource),
+	.resource	  = s5p6440_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5p6440_spi1_pdata,
+	},
+};
+
+void __init s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S5P6440_SPI_SRCCLK_SCLK) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s5p6440_spi0_pdata;
+		break;
+	case 1:
+		pd = &s5p6440_spi1_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/dma.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/dma.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/dma.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5p6440_pdma_resource[] = {
+	[0] = {
+		.start  = S5P6440_PA_PDMA,
+		.end    = S5P6440_PA_PDMA + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_DMA0,
+		.end	= IRQ_DMA0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_MAX,
+		[10] = DMACH_PCM0_TX,
+		[11] = DMACH_PCM0_RX,
+		[12] = DMACH_I2S0_TX,
+		[13] = DMACH_I2S0_RX,
+		[14] = DMACH_SPI0_TX,
+		[15] = DMACH_SPI0_RX,
+		[16] = DMACH_MAX,
+		[17] = DMACH_MAX,
+		[18] = DMACH_MAX,
+		[19] = DMACH_MAX,
+		[20] = DMACH_SPI1_TX,
+		[21] = DMACH_SPI1_RX,
+		[22] = DMACH_MAX,
+		[23] = DMACH_MAX,
+		[24] = DMACH_MAX,
+		[25] = DMACH_MAX,
+		[26] = DMACH_MAX,
+		[27] = DMACH_MAX,
+		[28] = DMACH_MAX,
+		[29] = DMACH_PWM,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5p6440_device_pdma = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p6440_pdma_resource),
+	.resource	= s5p6440_pdma_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5p6440_pdma_pdata,
+	},
+};
+
+static struct platform_device *s5p6440_dmacs[] __initdata = {
+	&s5p6440_device_pdma,
+};
+
+static int __init s5p6440_dma_init(void)
+{
+	platform_add_devices(s5p6440_dmacs, ARRAY_SIZE(s5p6440_dmacs));
+
+	return 0;
+}
+arch_initcall(s5p6440_dma_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/gpio.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -46,6 +46,7 @@
 	void __iomem *base = ourchip->base;
 	void __iomem *regcon = base;
 	unsigned long con;
+	unsigned long flags;
 
 	switch (offset) {
 	case 6:
@@ -63,10 +64,14 @@
 		break;
 	}
 
+	s3c_gpio_lock(ourchip, flags);
+
 	con = __raw_readl(regcon);
 	con &= ~(0xf << con_4bit_shift(offset));
 	__raw_writel(con, regcon);
 
+	s3c_gpio_unlock(ourchip, flags);
+
 	return 0;
 }
 
@@ -78,6 +83,7 @@
 	void __iomem *regcon = base;
 	unsigned long con;
 	unsigned long dat;
+	unsigned long flags;
 	unsigned con_offset  = offset;
 
 	switch (con_offset) {
@@ -96,6 +102,8 @@
 		break;
 	}
 
+	s3c_gpio_lock(ourchip, flags);
+
 	con = __raw_readl(regcon);
 	con &= ~(0xf << con_4bit_shift(con_offset));
 	con |= 0x1 << con_4bit_shift(con_offset);
@@ -109,6 +117,8 @@
 	__raw_writel(con, regcon);
 	__raw_writel(dat, base + GPIODAT_OFF);
 
+	s3c_gpio_unlock(ourchip, flags);
+
 	return 0;
 }
 
@@ -117,6 +127,7 @@
 {
 	void __iomem *reg = chip->base;
 	unsigned int shift;
+	unsigned long flags;
 	u32 con;
 
 	switch (off) {
@@ -142,11 +153,15 @@
 		cfg <<= shift;
 	}
 
+	s3c_gpio_lock(chip, flags);
+
 	con = __raw_readl(reg);
 	con &= ~(0xf << shift);
 	con |= cfg;
 	__raw_writel(con, reg);
 
+	s3c_gpio_unlock(chip, flags);
+
 	return 0;
 }
 
@@ -161,12 +176,15 @@
 	}, {
 		.cfg_eint	= 0,
 		.set_config	= s3c_gpio_setcfg_s3c24xx,
+		.get_config	= s3c_gpio_getcfg_s3c24xx,
 	}, {
 		.cfg_eint	= 2,
 		.set_config	= s3c_gpio_setcfg_s3c24xx,
+		.get_config	= s3c_gpio_getcfg_s3c24xx,
 	}, {
 		.cfg_eint	= 3,
 		.set_config	= s3c_gpio_setcfg_s3c24xx,
+		.get_config	= s3c_gpio_getcfg_s3c24xx,
 	},
 };
 
@@ -279,6 +297,8 @@
 	for (; nr_chips > 0; nr_chips--, chipcfg++) {
 		if (!chipcfg->set_config)
 			chipcfg->set_config	= s3c_gpio_setcfg_s3c64xx_4bit;
+		if (!chipcfg->get_config)
+			chipcfg->get_config	= s3c_gpio_getcfg_s3c64xx_4bit;
 		if (!chipcfg->set_pull)
 			chipcfg->set_pull	= s3c_gpio_setpull_updown;
 		if (!chipcfg->get_pull)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/include/mach/dma.h linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/include/mach/dma.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/include/mach/dma.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/include/mach/dma.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/include/mach/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -72,7 +72,14 @@
 #define S5P_IRQ_EINT_BASE	(S5P_IRQ_VIC1(31) + 6)
 
 #define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
-#define IRQ_EINT(x)		S5P_EINT(x)
+
+#define S5P_EINT_BASE1		(S5P_IRQ_EINT_BASE)
+/*
+ * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
+ * to wake up from sleep. If request is beyond this range, by mistake, a large
+ * return value for an irq number should be indication of something amiss.
+ */
+#define S5P_EINT_BASE2		(0xf0000000)
 
 /*
  * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/include/mach/map.h linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/include/mach/map.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/include/mach/map.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/include/mach/map.h	2010-08-01 18:11:14.000000000 -0400
@@ -29,6 +29,8 @@
 #define S5P6440_PA_VIC0		(0xE4000000)
 #define S5P_PA_VIC0		S5P6440_PA_VIC0
 
+#define S5P6440_PA_PDMA		0xE9000000
+
 #define S5P6440_PA_VIC1		(0xE4100000)
 #define S5P_PA_VIC1		S5P6440_PA_VIC1
 
@@ -52,6 +54,9 @@
 
 #define S5P6440_PA_IIC0		(0xEC104000)
 
+#define S5P6440_PA_SPI0		0xEC400000
+#define S5P6440_PA_SPI1		0xEC500000
+
 #define S5P6440_PA_HSOTG	(0xED100000)
 
 #define S5P6440_PA_HSMMC0	(0xED800000)
@@ -61,8 +66,19 @@
 #define S5P6440_PA_SDRAM	(0x20000000)
 #define S5P_PA_SDRAM		S5P6440_PA_SDRAM
 
+/* I2S */
+#define S5P6440_PA_I2S		0xF2000000
+
+/* PCM */
+#define S5P6440_PA_PCM		0xF2100000
+
+#define S5P6440_PA_ADC		(0xF3000000)
+
 /* compatibiltiy defines. */
 #define S3C_PA_UART		S5P6440_PA_UART
 #define S3C_PA_IIC		S5P6440_PA_IIC0
+#define S3C_PA_WDT		S5P6440_PA_WDT
+
+#define SAMSUNG_PA_ADC		S5P6440_PA_ADC
 
 #endif /* __ASM_ARCH_MAP_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/include/mach/pwm-clock.h linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/include/mach/pwm-clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/include/mach/pwm-clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,11 +1,14 @@
 /* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
  *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *      http://armlinux.simtec.co.uk/
  *
- * Copyright 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
+ * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
  *
  * S5P6440 - pwm clock and timer support
  *
@@ -14,16 +17,19 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
 /**
  * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @cfg: The timer TCFG1 register bits shifted down to 0.
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
  *
  * Return true if the given configuration from TCFG1 is a TCLK instead
  * any of the TDIV clocks.
  */
 static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
 {
-	return tcfg == S3C2410_TCFG1_MUX_TCLK;
+	return 0;
 }
 
 /**
@@ -35,7 +41,7 @@
  */
 static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
 {
-	return 1 << (1 + tcfg1);
+	return 1 << tcfg1;
 }
 
 /**
@@ -45,7 +51,7 @@
  */
 static inline unsigned int pwm_tdiv_has_div1(void)
 {
-	return 0;
+	return 1;
 }
 
 /**
@@ -56,7 +62,9 @@
  */
 static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
 {
-	return ilog2(div) - 1;
+	return ilog2(div);
 }
 
-#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+#define S3C_TCFG1_MUX_TCLK 0
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/include/mach/spi-clocks.h linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/include/mach/spi-clocks.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/include/mach/spi-clocks.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S5P6440_PLAT_SPI_CLKS_H
+#define __S5P6440_PLAT_SPI_CLKS_H __FILE__
+
+#define S5P6440_SPI_SRCCLK_PCLK		0
+#define S5P6440_SPI_SRCCLK_SCLK		1
+
+#endif /* __S5P6440_PLAT_SPI_CLKS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -9,12 +9,17 @@
 
 config CPU_S5P6440
 	bool
+	select S3C_PL330_DMA
 	help
 	  Enable S5P6440 CPU support
 
 config MACH_SMDK6440
 	bool "SMDK6440"
 	select CPU_S5P6440
+	select SAMSUNG_DEV_TS
+	select SAMSUNG_DEV_ADC
+	select S3C_DEV_WDT
+	select HAVE_S3C2410_WATCHDOG
 	help
 	  Machine support for the Samsung SMDK6440
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/mach-smdk6440.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/mach-smdk6440.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/mach-smdk6440.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/mach-smdk6440.c	2010-08-01 18:11:14.000000000 -0400
@@ -38,6 +38,8 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pll.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
 
 #define S5P6440_UCON_DEFAULT    (S3C2410_UCON_TXILEVEL |	\
 				S3C2410_UCON_RXILEVEL |		\
@@ -84,6 +86,16 @@
 };
 
 static struct platform_device *smdk6440_devices[] __initdata = {
+	&s5p6440_device_iis,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&s3c_device_wdt,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
 };
 
 static void __init smdk6440_map_io(void)
@@ -95,6 +107,8 @@
 
 static void __init smdk6440_machine_init(void)
 {
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
 	platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -12,8 +12,13 @@
 
 # Core support for S5P6440 system
 
-obj-$(CONFIG_CPU_S5P6440)	+= cpu.o init.o clock.o gpio.o
+obj-$(CONFIG_CPU_S5P6440)	+= cpu.o init.o clock.o gpio.o dma.o
+obj-$(CONFIG_CPU_S5P6440)	+= setup-i2c0.o
 
 # machine support
 
 obj-$(CONFIG_MACH_SMDK6440)	+= mach-smdk6440.o
+
+# device support
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/setup-i2c0.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/setup-i2c0.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6440/setup-i2c0.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6440/setup-i2c0.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	/* Will be populated later */
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -294,7 +294,7 @@
 	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
 	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
 
-	printk(KERN_INFO "S5P6440: PLL settings, A=%ld, M=%ld, E=%ld",
+	printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld",
 			apll, mpll, epll);
 
 	clk_fout_apll.rate = apll;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/cpu.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/cpu.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/cpu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/cpu.c	2010-08-01 18:11:14.000000000 -0400
@@ -95,7 +95,7 @@
 	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
 
-static struct sysdev_class s5p6442_sysclass = {
+struct sysdev_class s5p6442_sysclass = {
 	.name	= "s5p6442-core",
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/dev-audio.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/dev-audio.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/dev-audio.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/dev-audio.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,197 @@
+/* linux/arch/arm/mach-s5p6442/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5p6442_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case 1:
+		s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(2));
+		break;
+
+	case -1:
+		s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(2));
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+	.cfg_gpio = s5p6442_cfg_i2s,
+};
+
+static struct resource s5p6442_iis0_resource[] = {
+	[0] = {
+		.start = S5P6442_PA_I2S0,
+		.end   = S5P6442_PA_I2S0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_TX,
+		.end   = DMACH_I2S0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_RX,
+		.end   = DMACH_I2S0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6442_device_iis0 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5p6442_iis0_resource),
+	.resource	  = s5p6442_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+static struct resource s5p6442_iis1_resource[] = {
+	[0] = {
+		.start = S5P6442_PA_I2S1,
+		.end   = S5P6442_PA_I2S1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_TX,
+		.end   = DMACH_I2S1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_RX,
+		.end   = DMACH_I2S1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6442_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5p6442_iis1_resource),
+	.resource	  = s5p6442_iis1_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(3));
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(3));
+		break;
+
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+	.cfg_gpio = s5p6442_pcm_cfg_gpio,
+};
+
+static struct resource s5p6442_pcm0_resource[] = {
+	[0] = {
+		.start = S5P6442_PA_PCM0,
+		.end   = S5P6442_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6442_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5p6442_pcm0_resource),
+	.resource	  = s5p6442_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5p6442_pcm1_resource[] = {
+	[0] = {
+		.start = S5P6442_PA_PCM1,
+		.end   = S5P6442_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5p6442_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5p6442_pcm1_resource),
+	.resource	  = s5p6442_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/dev-spi.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/dev-spi.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/dev-spi.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/dev-spi.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,123 @@
+/* linux/arch/arm/mach-s5p6442/dev-spi.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+
+static char *spi_src_clks[] = {
+	[S5P6442_SPI_SRCCLK_PCLK] = "pclk",
+	[S5P6442_SPI_SRCCLK_SCLK] = "spi_epll",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the CS.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s5p6442_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPB(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5P6442_GPB(3), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6442_GPB(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5P6442_GPB(3), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s5p6442_spi0_resource[] = {
+	[0] = {
+		.start = S5P6442_PA_SPI,
+		.end   = S5P6442_PA_SPI + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5p6442_spi0_pdata = {
+	.cfg_gpio = s5p6442_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x1ff,
+	.rx_lvl_offset = 15,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5p6442_device_spi = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5p6442_spi0_resource),
+	.resource	  = s5p6442_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5p6442_spi0_pdata,
+	},
+};
+
+void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s5p6442_spi0_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/dma.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/dma.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/dma.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5p6442_pdma_resource[] = {
+	[0] = {
+		.start  = S5P6442_PA_PDMA,
+		.end    = S5P6442_PA_PDMA + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA,
+		.end	= IRQ_PDMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5p6442_pdma_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_MAX,
+		[7] = DMACH_MAX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_MAX,
+		[15] = DMACH_MAX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_MAX,
+		[19] = DMACH_MAX,
+		[20] = DMACH_PCM0_RX,
+		[21] = DMACH_PCM0_TX,
+		[22] = DMACH_PCM1_RX,
+		[23] = DMACH_PCM1_TX,
+		[24] = DMACH_MAX,
+		[25] = DMACH_MAX,
+		[26] = DMACH_MAX,
+		[27] = DMACH_MSM_REQ0,
+		[28] = DMACH_MSM_REQ1,
+		[29] = DMACH_MSM_REQ2,
+		[30] = DMACH_MSM_REQ3,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5p6442_device_pdma = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5p6442_pdma_resource),
+	.resource	= s5p6442_pdma_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5p6442_pdma_pdata,
+	},
+};
+
+static struct platform_device *s5p6442_dmacs[] __initdata = {
+	&s5p6442_device_pdma,
+};
+
+static int __init s5p6442_dma_init(void)
+{
+	platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs));
+
+	return 0;
+}
+arch_initcall(s5p6442_dma_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/include/mach/dma.h linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/include/mach/dma.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/include/mach/dma.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/include/mach/dma.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/include/mach/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -77,8 +77,9 @@
 
 #define S5P_IRQ_EINT_BASE	(IRQ_VIC_END + 1)
 
-#define IRQ_EINT(x)             ((x) < 16 ? S5P_IRQ_VIC0(x) : \
-					(S5P_IRQ_EINT_BASE + (x)-16))
+#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2		(S5P_IRQ_EINT_BASE)
+
 /* Set the default NR_IRQS */
 
 #define NR_IRQS 		(IRQ_EINT(31) + 1)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/include/mach/map.h linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/include/mach/map.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/include/mach/map.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/include/mach/map.h	2010-08-01 18:11:14.000000000 -0400
@@ -34,6 +34,9 @@
 #define S5P6442_PA_VIC2		(0xE4200000)
 #define S5P_PA_VIC2		S5P6442_PA_VIC2
 
+#define S5P6442_PA_MDMA		0xE8000000
+#define S5P6442_PA_PDMA		0xE9000000
+
 #define S5P6442_PA_TIMER	(0xEA000000)
 #define S5P_PA_TIMER		S5P6442_PA_TIMER
 
@@ -51,6 +54,16 @@
 #define S5P6442_PA_SDRAM	(0x20000000)
 #define S5P_PA_SDRAM		S5P6442_PA_SDRAM
 
+#define S5P6442_PA_SPI		0xEC300000
+
+/* I2S */
+#define S5P6442_PA_I2S0		0xC0B00000
+#define S5P6442_PA_I2S1		0xF2200000
+
+/* PCM */
+#define S5P6442_PA_PCM0		0xF2400000
+#define S5P6442_PA_PCM1		0xF2500000
+
 /* compatibiltiy defines. */
 #define S3C_PA_UART		S5P6442_PA_UART
 #define S3C_PA_IIC		S5P6442_PA_IIC0
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/include/mach/pwm-clock.h linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/include/mach/pwm-clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/include/mach/pwm-clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,13 +1,14 @@
 /* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
  *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *      http://armlinux.simtec.co.uk/
  *
- * Copyright 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
  *
  * S5P6442 - pwm clock and timer support
  *
@@ -21,14 +22,14 @@
 
 /**
  * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @cfg: The timer TCFG1 register bits shifted down to 0.
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
  *
  * Return true if the given configuration from TCFG1 is a TCLK instead
  * any of the TDIV clocks.
  */
 static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
 {
-	return tcfg == S3C2410_TCFG1_MUX_TCLK;
+	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
 }
 
 /**
@@ -40,7 +41,7 @@
  */
 static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
 {
-	return 1 << (1 + tcfg1);
+	return 1 << tcfg1;
 }
 
 /**
@@ -50,7 +51,7 @@
  */
 static inline unsigned int pwm_tdiv_has_div1(void)
 {
-	return 0;
+	return 1;
 }
 
 /**
@@ -61,9 +62,9 @@
  */
 static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
 {
-	return ilog2(div) - 1;
+	return ilog2(div);
 }
 
-#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
 
 #endif /* __ASM_ARCH_PWMCLK_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/include/mach/spi-clocks.h linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/include/mach/spi-clocks.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/include/mach/spi-clocks.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S5P6442_PLAT_SPI_CLKS_H
+#define __S5P6442_PLAT_SPI_CLKS_H __FILE__
+
+#define S5P6442_SPI_SRCCLK_PCLK		0
+#define S5P6442_SPI_SRCCLK_SCLK		1
+
+#endif /* __S5P6442_PLAT_SPI_CLKS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -12,6 +12,7 @@
 config CPU_S5P6442
 	bool
 	select PLAT_S5P
+	select S3C_PL330_DMA
 	help
 	  Enable S5P6442 CPU support
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/mach-smdk6442.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/mach-smdk6442.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/mach-smdk6442.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/mach-smdk6442.c	2010-08-01 18:11:14.000000000 -0400
@@ -65,6 +65,7 @@
 };
 
 static struct platform_device *smdk6442_devices[] __initdata = {
+	&s5p6442_device_iis0,
 };
 
 static void __init smdk6442_map_io(void)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -12,8 +12,13 @@
 
 # Core support for S5P6442 system
 
-obj-$(CONFIG_CPU_S5P6442)	+= cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5P6442)	+= cpu.o init.o clock.o dma.o
+obj-$(CONFIG_CPU_S5P6442)	+= setup-i2c0.o
 
 # machine support
 
 obj-$(CONFIG_MACH_SMDK6442)	+= mach-smdk6442.o
+
+# device support
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/setup-i2c0.c linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/setup-i2c0.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5p6442/setup-i2c0.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5p6442/setup-i2c0.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	/* Will be populated later */
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/clock.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,1358 @@
+/* linux/arch/arm/mach-s5pc100/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PC100 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5pc100.h>
+
+static struct clk s5p_clk_otgphy = {
+	.name		= "otg_phy",
+	.id		= -1,
+};
+
+static struct clk *clk_src_mout_href_list[] = {
+	[0] = &s5p_clk_27m,
+	[1] = &clk_fin_hpll,
+};
+
+static struct clksrc_sources clk_src_mout_href = {
+	.sources	= clk_src_mout_href_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mout_href_list),
+};
+
+static struct clksrc_clk clk_mout_href = {
+	.clk = {
+		.name           = "mout_href",
+		.id             = -1,
+	},
+	.sources        = &clk_src_mout_href,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
+};
+
+static struct clk *clk_src_mout_48m_list[] = {
+	[0] = &clk_xusbxti,
+	[1] = &s5p_clk_otgphy,
+};
+
+static struct clksrc_sources clk_src_mout_48m = {
+	.sources	= clk_src_mout_48m_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mout_48m_list),
+};
+
+static struct clksrc_clk clk_mout_48m = {
+	.clk = {
+		.name           = "mout_48m",
+		.id             = -1,
+	},
+	.sources        = &clk_src_mout_48m,
+	.reg_src        = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name           = "mout_mpll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_mpll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk    = {
+		.name           = "mout_apll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_apll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk    = {
+		.name           = "mout_epll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_epll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+static struct clk *clk_src_mout_hpll_list[] = {
+	[0] = &s5p_clk_27m,
+};
+
+static struct clksrc_sources clk_src_mout_hpll = {
+	.sources	= clk_src_mout_hpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mout_hpll_list),
+};
+
+static struct clksrc_clk clk_mout_hpll = {
+	.clk    = {
+		.name           = "mout_hpll",
+		.id             = -1,
+	},
+	.sources        = &clk_src_mout_hpll,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_apll = {
+	.clk	= {
+		.name	= "div_apll",
+		.id	= -1,
+		.parent	= &clk_mout_apll.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_arm = {
+	.clk	= {
+		.name	= "div_arm",
+		.id	= -1,
+		.parent	= &clk_div_apll.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_d0_bus = {
+	.clk	= {
+		.name	= "div_d0_bus",
+		.id	= -1,
+		.parent	= &clk_div_arm.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_pclkd0 = {
+	.clk	= {
+		.name	= "div_pclkd0",
+		.id	= -1,
+		.parent	= &clk_div_d0_bus.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_secss = {
+	.clk	= {
+		.name	= "div_secss",
+		.id	= -1,
+		.parent	= &clk_div_d0_bus.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_apll2 = {
+	.clk	= {
+		.name	= "div_apll2",
+		.id	= -1,
+		.parent	= &clk_mout_apll.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 },
+};
+
+static struct clk *clk_src_mout_am_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_div_apll2.clk,
+};
+
+struct clksrc_sources clk_src_mout_am = {
+	.sources	= clk_src_mout_am_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mout_am_list),
+};
+
+static struct clksrc_clk clk_mout_am = {
+	.clk	= {
+		.name	= "mout_am",
+		.id	= -1,
+	},
+	.sources = &clk_src_mout_am,
+	.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_d1_bus = {
+	.clk	= {
+		.name	= "div_d1_bus",
+		.id	= -1,
+		.parent	= &clk_mout_am.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_mpll2 = {
+	.clk	= {
+		.name	= "div_mpll2",
+		.id	= -1,
+		.parent	= &clk_mout_am.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_mpll = {
+	.clk	= {
+		.name	= "div_mpll",
+		.id	= -1,
+		.parent	= &clk_mout_am.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 },
+};
+
+static struct clk *clk_src_mout_onenand_list[] = {
+	[0] = &clk_div_d0_bus.clk,
+	[1] = &clk_div_d1_bus.clk,
+};
+
+struct clksrc_sources clk_src_mout_onenand = {
+	.sources	= clk_src_mout_onenand_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mout_onenand_list),
+};
+
+static struct clksrc_clk clk_mout_onenand = {
+	.clk	= {
+		.name	= "mout_onenand",
+		.id	= -1,
+	},
+	.sources = &clk_src_mout_onenand,
+	.reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_onenand = {
+	.clk	= {
+		.name	= "div_onenand",
+		.id	= -1,
+		.parent	= &clk_mout_onenand.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 },
+};
+
+static struct clksrc_clk clk_div_pclkd1 = {
+	.clk	= {
+		.name	= "div_pclkd1",
+		.id	= -1,
+		.parent	= &clk_div_d1_bus.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_cam = {
+	.clk	= {
+		.name	= "div_cam",
+		.id	= -1,
+		.parent	= &clk_div_mpll2.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 },
+};
+
+static struct clksrc_clk clk_div_hdmi = {
+	.clk	= {
+		.name	= "div_hdmi",
+		.id	= -1,
+		.parent	= &clk_mout_hpll.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
+};
+
+static int s5pc100_epll_enable(struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+	if (enable)
+		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+	else
+		__raw_writel(epll_con, S5P_EPLL_CON);
+
+	return 0;
+}
+
+static unsigned long s5pc100_epll_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+
+static u32 epll_div[][4] = {
+	{ 32750000,	131, 3, 4 },
+	{ 32768000,	131, 3, 4 },
+	{ 36000000,	72,  3, 3 },
+	{ 45000000,	90,  3, 3 },
+	{ 45158000,	90,  3, 3 },
+	{ 45158400,	90,  3, 3 },
+	{ 48000000,	96,  3, 3 },
+	{ 49125000,	131, 4, 3 },
+	{ 49152000,	131, 4, 3 },
+	{ 60000000,	120, 3, 3 },
+	{ 67737600,	226, 5, 3 },
+	{ 67738000,	226, 5, 3 },
+	{ 73800000,	246, 5, 3 },
+	{ 73728000,	246, 5, 3 },
+	{ 72000000,	144, 3, 3 },
+	{ 84000000,	168, 3, 3 },
+	{ 96000000,	96,  3, 2 },
+	{ 144000000,	144, 3, 2 },
+	{ 192000000,	96,  3, 1 }
+};
+
+static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con;
+	unsigned int i;
+
+	if (clk->rate == rate)	/* Return if nothing changed */
+		return 0;
+
+	epll_con = __raw_readl(S5P_EPLL_CON);
+
+	epll_con &= ~(PLL65XX_MDIV_MASK | PLL65XX_PDIV_MASK | PLL65XX_SDIV_MASK);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		if (epll_div[i][0] == rate) {
+			epll_con |= (epll_div[i][1] << PLL65XX_MDIV_SHIFT) |
+				    (epll_div[i][2] << PLL65XX_PDIV_SHIFT) |
+				    (epll_div[i][3] << PLL65XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P_EPLL_CON);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5pc100_epll_ops = {
+	.get_rate = s5pc100_epll_get_rate,
+	.set_rate = s5pc100_epll_set_rate,
+};
+
+static int s5pc100_d0_0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc100_d0_1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc100_d0_2_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc100_d1_0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc100_d1_1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc100_d1_2_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc100_d1_3_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc100_d1_4_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc100_d1_5_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_SCLK0, clk, enable);
+}
+
+static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_SCLK1, clk, enable);
+}
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "cssys",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "secss",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "g2d",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "mdma",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "cfcon",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "nfcon",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "onenandc",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "sdm",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_2_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "seckey",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_2_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "modemif",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "usbhost",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "pdma",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "pdma",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "rotator",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "fimc",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "fimc",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "fimc",
+		.id		= 2,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "jpeg",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "mipi-dsim",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "mipi-csis",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_1_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "g3d",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_0_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "tv",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_2_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "vp",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_2_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "mixer",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_2_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "hdmi",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_2_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "mfc",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_2_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "apc",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "iec",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "i2c",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "i2c",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "irda",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "ccan",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "ccan",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 11),
+	}, {
+		.name		= "hsitx",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 12),
+	}, {
+		.name		= "hsirx",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 13),
+	}, {
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "iis",
+		.id		= 2,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "pcm",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "pcm",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "spdif",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "keyif",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_5_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "spi_48m",
+		.id		= 0,
+		.parent		= &clk_mout_48m.clk,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= (1 << 7),
+	}, {
+		.name		= "spi_48m",
+		.id		= 1,
+		.parent		= &clk_mout_48m.clk,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "spi_48m",
+		.id		= 2,
+		.parent		= &clk_mout_48m.clk,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= (1 << 9),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 0,
+		.parent		= &clk_mout_48m.clk,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= (1 << 15),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 1,
+		.parent		= &clk_mout_48m.clk,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= (1 << 16),
+	}, {
+		.name		= "mmc_48m",
+		.id		= 2,
+		.parent		= &clk_mout_48m.clk,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= (1 << 17),
+	},
+};
+
+static struct clk clk_vclk54m = {
+	.name		= "vclk_54m",
+	.id		= -1,
+	.rate		= 54000000,
+};
+
+static struct clk clk_i2scdclk0 = {
+	.name		= "i2s_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_i2scdclk1 = {
+	.name		= "i2s_cdclk1",
+	.id		= -1,
+};
+
+static struct clk clk_i2scdclk2 = {
+	.name		= "i2s_cdclk2",
+	.id		= -1,
+};
+
+static struct clk clk_pcmcdclk0 = {
+	.name		= "pcm_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_pcmcdclk1 = {
+	.name		= "pcm_cdclk1",
+	.id		= -1,
+};
+
+static struct clk *clk_src_group1_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll2.clk,
+	[2] = &clk_fin_epll,
+	[3] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group1 = {
+	.sources	= clk_src_group1_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group1_list),
+};
+
+static struct clk *clk_src_group2_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+};
+
+struct clksrc_sources clk_src_group2 = {
+	.sources	= clk_src_group2_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group2_list),
+};
+
+static struct clk *clk_src_group3_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_fin_epll,
+	[3] = &clk_i2scdclk0,
+	[4] = &clk_pcmcdclk0,
+	[5] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group3 = {
+	.sources	= clk_src_group3_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group3_list),
+};
+
+static struct clk *clk_src_group4_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_fin_epll,
+	[3] = &clk_i2scdclk1,
+	[4] = &clk_pcmcdclk1,
+	[5] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group4 = {
+	.sources	= clk_src_group4_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group4_list),
+};
+
+static struct clk *clk_src_group5_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_fin_epll,
+	[3] = &clk_i2scdclk2,
+	[4] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group5 = {
+	.sources	= clk_src_group5_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group5_list),
+};
+
+static struct clk *clk_src_group6_list[] = {
+	[0] = &s5p_clk_27m,
+	[1] = &clk_vclk54m,
+	[2] = &clk_div_hdmi.clk,
+};
+
+struct clksrc_sources clk_src_group6 = {
+	.sources	= clk_src_group6_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group6_list),
+};
+
+static struct clk *clk_src_group7_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_mout_hpll.clk,
+	[3] = &clk_vclk54m,
+};
+
+struct clksrc_sources clk_src_group7 = {
+	.sources	= clk_src_group7_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_group7_list),
+};
+
+static struct clk *clk_src_mmc0_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_fin_epll,
+};
+
+struct clksrc_sources clk_src_mmc0 = {
+	.sources	= clk_src_mmc0_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mmc0_list),
+};
+
+static struct clk *clk_src_mmc12_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_fin_epll,
+	[3] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_mmc12 = {
+	.sources	= clk_src_mmc12_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mmc12_list),
+};
+
+static struct clk *clk_src_irda_usb_list[] = {
+	[0] = &clk_mout_epll.clk,
+	[1] = &clk_div_mpll.clk,
+	[2] = &clk_fin_epll,
+	[3] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_irda_usb = {
+	.sources	= clk_src_irda_usb_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_irda_usb_list),
+};
+
+static struct clk *clk_src_pwi_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_mout_epll.clk,
+	[2] = &clk_div_mpll.clk,
+};
+
+struct clksrc_sources clk_src_pwi = {
+	.sources	= clk_src_pwi_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_pwi_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 0,
+			.ctrlbit	= (1 << 4),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_group1,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 1,
+			.ctrlbit	= (1 << 5),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_group1,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_spi",
+			.id		= 2,
+			.ctrlbit	= (1 << 6),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_group1,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= -1,
+			.ctrlbit	= (1 << 3),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_group2,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_mixer",
+			.id		= -1,
+			.ctrlbit	= (1 << 6),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_group6,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
+	}, {
+		.clk	= {
+			.name		= "sclk_audio",
+			.id		= 0,
+			.ctrlbit	= (1 << 8),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group3,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_audio",
+			.id		= 1,
+			.ctrlbit	= (1 << 9),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group4,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_audio",
+			.id		= 2,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group5,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_lcd",
+			.id		= -1,
+			.ctrlbit	= (1 << 0),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group7,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 12, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= 0,
+			.ctrlbit	= (1 << 1),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group7,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= 1,
+			.ctrlbit	= (1 << 2),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group7,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= 2,
+			.ctrlbit	= (1 << 3),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_group7,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 24, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 0,
+			.ctrlbit	= (1 << 12),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_mmc0,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 1,
+			.ctrlbit	= (1 << 13),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_mmc12,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "mmc_bus",
+			.id		= 2,
+			.ctrlbit	= (1 << 14),
+			.enable		= s5pc100_sclk1_ctrl,
+
+		},
+		.sources = &clk_src_mmc12,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_irda",
+			.id		= 2,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_irda_usb,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_irda",
+			.id		= -1,
+			.ctrlbit	= (1 << 10),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_mmc12,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_pwi",
+			.id		= -1,
+			.ctrlbit	= (1 << 1),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_pwi,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 0, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "sclk_uhost",
+			.id		= -1,
+			.ctrlbit	= (1 << 11),
+			.enable		= s5pc100_sclk0_ctrl,
+
+		},
+		.sources = &clk_src_irda_usb,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 20, .size = 4 },
+	},
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_mout_hpll,
+	&clk_mout_href,
+	&clk_mout_48m,
+	&clk_div_apll,
+	&clk_div_arm,
+	&clk_div_d0_bus,
+	&clk_div_pclkd0,
+	&clk_div_secss,
+	&clk_div_apll2,
+	&clk_mout_am,
+	&clk_div_d1_bus,
+	&clk_div_mpll2,
+	&clk_div_mpll,
+	&clk_mout_onenand,
+	&clk_div_onenand,
+	&clk_div_pclkd1,
+	&clk_div_cam,
+	&clk_div_hdmi,
+};
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+	unsigned long xtal;
+	unsigned long arm;
+	unsigned long hclkd0;
+	unsigned long hclkd1;
+	unsigned long pclkd0;
+	unsigned long pclkd1;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long epll;
+	unsigned long hpll;
+	unsigned int ptr;
+
+	/* Set S5PC100 functions for clk_fout_epll */
+	clk_fout_epll.enable = s5pc100_epll_enable;
+	clk_fout_epll.ops = &s5pc100_epll_ops;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	xtal = clk_get_rate(&clk_xtal);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5p_get_pll65xx(xtal, __raw_readl(S5P_APLL_CON));
+	mpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_MPLL_CON));
+	epll = s5p_get_pll65xx(xtal, __raw_readl(S5P_EPLL_CON));
+	hpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_HPLL_CON));
+
+	printk(KERN_INFO "S5PC100: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz, E=%ld.%ldMHz, H=%ld.%ldMHz\n",
+			print_mhz(apll), print_mhz(mpll), print_mhz(epll), print_mhz(hpll));
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_mout_hpll.clk.rate = hpll;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_set_clksrc(&clksrcs[ptr], true);
+
+	arm = clk_get_rate(&clk_div_arm.clk);
+	hclkd0 = clk_get_rate(&clk_div_d0_bus.clk);
+	pclkd0 = clk_get_rate(&clk_div_pclkd0.clk);
+	hclkd1 = clk_get_rate(&clk_div_d1_bus.clk);
+	pclkd1 = clk_get_rate(&clk_div_pclkd1.clk);
+
+	printk(KERN_INFO "S5PC100: HCLKD0=%ld.%ldMHz, HCLKD1=%ld.%ldMHz, PCLKD0=%ld.%ldMHz, PCLKD1=%ld.%ldMHz\n",
+			print_mhz(hclkd0), print_mhz(hclkd1), print_mhz(pclkd0), print_mhz(pclkd1));
+
+	clk_f.rate = arm;
+	clk_h.rate = hclkd1;
+	clk_p.rate = pclkd1;
+}
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+	{
+		.name		= "tzic",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_0_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "ebi",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "intmem",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "dmc",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "chipid",
+		.id		= -1,
+		.parent		= &clk_div_d0_bus.clk,
+		.enable		= s5pc100_d0_1_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 0),
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 1),
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 2),
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_4_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_div_d1_bus.clk,
+		.enable		= s5pc100_d1_3_ctrl,
+		.ctrlbit	= (1 << 6),
+	},
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_i2scdclk0,
+	&clk_i2scdclk1,
+	&clk_i2scdclk2,
+	&clk_pcmcdclk0,
+	&clk_pcmcdclk1,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/cpu.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/cpu.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/cpu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/cpu.c	2010-08-01 18:11:14.000000000 -0400
@@ -22,47 +22,55 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
-#include <asm/proc-fns.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <asm/proc-fns.h>
+
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <asm/irq.h>
 
-#include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
-#include <plat/regs-power.h>
+#include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/clock.h>
-#include <plat/sdhci.h>
 #include <plat/iic-core.h>
+#include <plat/sdhci.h>
+#include <plat/onenand-core.h>
+
 #include <plat/s5pc100.h>
 
 /* Initial IO mappings */
 
 static struct map_desc s5pc100_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
+		.pfn		= __phys_to_pfn(S5PC100_PA_SYSTIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)VA_VIC2,
+		.pfn		= __phys_to_pfn(S5P_PA_VIC2),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC100_VA_OTHERS,
+		.pfn		= __phys_to_pfn(S5PC100_PA_OTHERS),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}
 };
 
 static void s5pc100_idle(void)
 {
-	unsigned long tmp;
-
-	tmp = __raw_readl(S5PC100_PWR_CFG);
-	tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
-	tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
-	tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
-	__raw_writel(tmp, S5PC100_PWR_CFG);
-
-	tmp = __raw_readl(S5PC100_OTHERS);
-	tmp |= S5PC100_PMU_INT_DISABLE;
-	__raw_writel(tmp, S5PC100_OTHERS);
+	if (!need_resched())
+		cpu_do_idle();
 
-	cpu_do_idle();
+	local_irq_enable();
 }
 
 /* s5pc100_map_io
@@ -82,26 +90,29 @@
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_onenand_setname("s5pc100-onenand");
 }
 
 void __init s5pc100_init_clocks(int xtal)
 {
-	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
 	s3c24xx_register_baseclocks(xtal);
-	s5pc1xx_register_clocks();
+	s5p_register_clocks(xtal);
 	s5pc100_register_clocks();
 	s5pc100_setup_clocks();
 }
 
 void __init s5pc100_init_irq(void)
 {
-	u32 vic_valid[] = {~0, ~0, ~0};
+	u32 vic[] = {~0, ~0, ~0};
 
 	/* VIC0, VIC1, and VIC2 are fully populated. */
-	s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
 
-struct sysdev_class s5pc100_sysclass = {
+static struct sysdev_class s5pc100_sysclass = {
 	.name	= "s5pc100-core",
 };
 
@@ -118,9 +129,10 @@
 
 int __init s5pc100_init(void)
 {
-	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+	printk(KERN_INFO "S5PC100: Initializing architecture\n");
 
-	s5pc1xx_idle = s5pc100_idle;
+	/* set idle function */
+	pm_idle = s5pc100_idle;
 
 	return sysdev_register(&s5pc100_sysdev);
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/dev-audio.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/dev-audio.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/dev-audio.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/dev-audio.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,287 @@
+/* linux/arch/arm/mach-s5pc100/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5pc100_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case 1:
+		s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(2));
+		break;
+
+	case 2:
+		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(4));
+		break;
+
+	case -1: /* Dedicated pins */
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+	.cfg_gpio = s5pc100_cfg_i2s,
+};
+
+static struct resource s5pc100_iis0_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_I2S0,
+		.end   = S5PC100_PA_I2S0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_TX,
+		.end   = DMACH_I2S0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_RX,
+		.end   = DMACH_I2S0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_iis0 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_iis0_resource),
+	.resource	  = s5pc100_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+static struct resource s5pc100_iis1_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_I2S1,
+		.end   = S5PC100_PA_I2S1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_TX,
+		.end   = DMACH_I2S1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_RX,
+		.end   = DMACH_I2S1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_iis1_resource),
+	.resource	  = s5pc100_iis1_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+static struct resource s5pc100_iis2_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_I2S2,
+		.end   = S5PC100_PA_I2S2 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S2_TX,
+		.end   = DMACH_I2S2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S2_RX,
+		.end   = DMACH_I2S2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_iis2 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s5pc100_iis2_resource),
+	.resource	  = s5pc100_iis2_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(5));
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(3));
+		break;
+
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+	.cfg_gpio = s5pc100_pcm_cfg_gpio,
+};
+
+static struct resource s5pc100_pcm0_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_PCM0,
+		.end   = S5PC100_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5pc100_pcm0_resource),
+	.resource	  = s5pc100_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pc100_pcm1_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_PCM1,
+		.end   = S5PC100_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pc100_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_pcm1_resource),
+	.resource	  = s5pc100_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(4));
+
+	return 0;
+}
+
+static struct resource s5pc100_ac97_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_AC97,
+		.end   = S5PC100_PA_AC97 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_AC97_PCMOUT,
+		.end   = DMACH_AC97_PCMOUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_AC97_PCMIN,
+		.end   = DMACH_AC97_PCMIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = DMACH_AC97_MICIN,
+		.end   = DMACH_AC97_MICIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.start = IRQ_AC97,
+		.end   = IRQ_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+	.cfg_gpio = s5pc100_ac97_cfg_gpio,
+};
+
+static u64 s5pc100_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pc100_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_ac97_resource),
+	.resource	  = s5pc100_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s5pc100_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/dev-spi.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/dev-spi.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/dev-spi.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/dev-spi.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,233 @@
+/* linux/arch/arm/mach-s5pc100/dev-spi.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+#include <plat/irqs.h>
+
+static char *spi_src_clks[] = {
+	[S5PC100_SPI_SRCCLK_PCLK] = "pclk",
+	[S5PC100_SPI_SRCCLK_48M] = "spi_48m",
+	[S5PC100_SPI_SRCCLK_SPIBUS] = "spi_bus",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the CS.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s5pc100_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5PC100_GPB(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPB(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPB(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5PC100_GPB(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PC100_GPB(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PC100_GPB(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5PC100_GPB(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPB(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PC100_GPB(6), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5PC100_GPB(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PC100_GPB(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PC100_GPB(6), S3C_GPIO_PULL_UP);
+		break;
+
+	case 2:
+		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PC100_GPG3(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PC100_GPG3(3), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s5pc100_spi0_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_SPI0,
+		.end   = S5PC100_PA_SPI0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5pc100_spi0_pdata = {
+	.cfg_gpio = s5pc100_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+	.high_speed = 1,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pc100_device_spi0 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5pc100_spi0_resource),
+	.resource	  = s5pc100_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5pc100_spi0_pdata,
+	},
+};
+
+static struct resource s5pc100_spi1_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_SPI1,
+		.end   = S5PC100_PA_SPI1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI1_TX,
+		.end   = DMACH_SPI1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI1_RX,
+		.end   = DMACH_SPI1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5pc100_spi1_pdata = {
+	.cfg_gpio = s5pc100_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+	.high_speed = 1,
+};
+
+struct platform_device s5pc100_device_spi1 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pc100_spi1_resource),
+	.resource	  = s5pc100_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5pc100_spi1_pdata,
+	},
+};
+
+static struct resource s5pc100_spi2_resource[] = {
+	[0] = {
+		.start = S5PC100_PA_SPI2,
+		.end   = S5PC100_PA_SPI2 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI2_TX,
+		.end   = DMACH_SPI2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI2_RX,
+		.end   = DMACH_SPI2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI2,
+		.end   = IRQ_SPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5pc100_spi2_pdata = {
+	.cfg_gpio = s5pc100_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 13,
+	.high_speed = 1,
+};
+
+struct platform_device s5pc100_device_spi2 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s5pc100_spi2_resource),
+	.resource	  = s5pc100_spi2_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5pc100_spi2_pdata,
+	},
+};
+
+void __init s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S5PC100_SPI_SRCCLK_SPIBUS) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s5pc100_spi0_pdata;
+		break;
+	case 1:
+		pd = &s5pc100_spi1_pdata;
+		break;
+	case 2:
+		pd = &s5pc100_spi2_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/dma.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/dma.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/dma.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5pc100_pdma0_resource[] = {
+	[0] = {
+		.start  = S5PC100_PA_PDMA0,
+		.end    = S5PC100_PA_PDMA0 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA0,
+		.end	= IRQ_PDMA0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_IRDA,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_I2S2_RX,
+		[15] = DMACH_I2S2_TX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_SPI1_RX,
+		[19] = DMACH_SPI1_TX,
+		[20] = DMACH_SPI2_RX,
+		[21] = DMACH_SPI2_TX,
+		[22] = DMACH_AC97_MICIN,
+		[23] = DMACH_AC97_PCMIN,
+		[24] = DMACH_AC97_PCMOUT,
+		[25] = DMACH_EXTERNAL,
+		[26] = DMACH_PWM,
+		[27] = DMACH_SPDIF,
+		[28] = DMACH_HSI_RX,
+		[29] = DMACH_HSI_TX,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5pc100_device_pdma0 = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5pc100_pdma0_resource),
+	.resource	= s5pc100_pdma0_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pc100_pdma0_pdata,
+	},
+};
+
+static struct resource s5pc100_pdma1_resource[] = {
+	[0] = {
+		.start  = S5PC100_PA_PDMA1,
+		.end    = S5PC100_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA1,
+		.end	= IRQ_PDMA1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_IRDA,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_I2S2_RX,
+		[15] = DMACH_I2S2_TX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_SPI1_RX,
+		[19] = DMACH_SPI1_TX,
+		[20] = DMACH_SPI2_RX,
+		[21] = DMACH_SPI2_TX,
+		[22] = DMACH_PCM0_RX,
+		[23] = DMACH_PCM0_TX,
+		[24] = DMACH_PCM1_RX,
+		[25] = DMACH_PCM1_TX,
+		[26] = DMACH_MSM_REQ0,
+		[27] = DMACH_MSM_REQ1,
+		[28] = DMACH_MSM_REQ2,
+		[29] = DMACH_MSM_REQ3,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5pc100_device_pdma1 = {
+	.name		= "s3c-pl330",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s5pc100_pdma1_resource),
+	.resource	= s5pc100_pdma1_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pc100_pdma1_pdata,
+	},
+};
+
+static struct platform_device *s5pc100_dmacs[] __initdata = {
+	&s5pc100_device_pdma0,
+	&s5pc100_device_pdma1,
+};
+
+static int __init s5pc100_dma_init(void)
+{
+	platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs));
+
+	return 0;
+}
+arch_initcall(s5pc100_dma_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/gpiolib.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/gpiolib.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/gpiolib.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/gpiolib.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,426 @@
+/*
+ * arch/arm/plat-s5pc100/gpiolib.c
+ *
+ *  Copyright 2009 Samsung Electronics Co
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5PC100 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+/* S5PC100 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	INT Type
+ * A0	8	4Bit	GPIO_INT0
+ * A1	5	4Bit	GPIO_INT1
+ * B	8	4Bit	GPIO_INT2
+ * C	5	4Bit	GPIO_INT3
+ * D	7	4Bit	GPIO_INT4
+ * E0	8	4Bit	GPIO_INT5
+ * E1	6	4Bit	GPIO_INT6
+ * F0	8	4Bit	GPIO_INT7
+ * F1	8	4Bit	GPIO_INT8
+ * F2	8	4Bit	GPIO_INT9
+ * F3	4	4Bit	GPIO_INT10
+ * G0	8	4Bit	GPIO_INT11
+ * G1	3	4Bit	GPIO_INT12
+ * G2	7	4Bit	GPIO_INT13
+ * G3	7	4Bit	GPIO_INT14
+ * H0	8	4Bit	WKUP_INT
+ * H1	8	4Bit	WKUP_INT
+ * H2	8	4Bit	WKUP_INT
+ * H3	8	4Bit	WKUP_INT
+ * I	8	4Bit	GPIO_INT15
+ * J0	8	4Bit	GPIO_INT16
+ * J1	5	4Bit	GPIO_INT17
+ * J2	8	4Bit	GPIO_INT18
+ * J3	8	4Bit	GPIO_INT19
+ * J4	4	4Bit	GPIO_INT20
+ * K0	8	4Bit	None
+ * K1	6	4Bit	None
+ * K2	8	4Bit	None
+ * K3	8	4Bit	None
+ * L0	8	4Bit	None
+ * L1	8	4Bit	None
+ * L2	8	4Bit	None
+ * L3	8	4Bit	None
+ */
+
+static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	return S3C_IRQ_GPIO(chip->base + offset);
+}
+
+static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
+{
+	int base;
+
+	base = chip->base - S5PC100_GPH0(0);
+	if (base == 0)
+		return IRQ_EINT(offset);
+	base = chip->base - S5PC100_GPH1(0);
+	if (base == 0)
+		return IRQ_EINT(8 + offset);
+	base = chip->base - S5PC100_GPH2(0);
+	if (base == 0)
+		return IRQ_EINT(16 + offset);
+	base = chip->base - S5PC100_GPH3(0);
+	if (base == 0)
+		return IRQ_EINT(24 + offset);
+	return -EINVAL;
+}
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_eint = {
+	.cfg_eint	= 0xf,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
+	{
+		.base	= S5PC100_GPA0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPA0(0),
+			.ngpio	= S5PC100_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.base	= S5PC100_GPA1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPA1(0),
+			.ngpio	= S5PC100_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.base	= S5PC100_GPB_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPB(0),
+			.ngpio	= S5PC100_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5PC100_GPC_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPC(0),
+			.ngpio	= S5PC100_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5PC100_GPD_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPD(0),
+			.ngpio	= S5PC100_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S5PC100_GPE0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPE0(0),
+			.ngpio	= S5PC100_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.base	= S5PC100_GPE1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPE1(0),
+			.ngpio	= S5PC100_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.base	= S5PC100_GPF0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF0(0),
+			.ngpio	= S5PC100_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.base	= S5PC100_GPF1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF1(0),
+			.ngpio	= S5PC100_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.base	= S5PC100_GPF2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF2(0),
+			.ngpio	= S5PC100_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.base	= S5PC100_GPF3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF3(0),
+			.ngpio	= S5PC100_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.base	= S5PC100_GPG0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG0(0),
+			.ngpio	= S5PC100_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.base	= S5PC100_GPG1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG1(0),
+			.ngpio	= S5PC100_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.base	= S5PC100_GPG2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG2(0),
+			.ngpio	= S5PC100_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.base	= S5PC100_GPG3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG3(0),
+			.ngpio	= S5PC100_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.base	= S5PC100_GPH0_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH0(0),
+			.ngpio	= S5PC100_GPIO_H0_NR,
+			.label	= "GPH0",
+		},
+	}, {
+		.base	= S5PC100_GPH1_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH1(0),
+			.ngpio	= S5PC100_GPIO_H1_NR,
+			.label	= "GPH1",
+		},
+	}, {
+		.base	= S5PC100_GPH2_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH2(0),
+			.ngpio	= S5PC100_GPIO_H2_NR,
+			.label	= "GPH2",
+		},
+	}, {
+		.base	= S5PC100_GPH3_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH3(0),
+			.ngpio	= S5PC100_GPIO_H3_NR,
+			.label	= "GPH3",
+		},
+	}, {
+		.base	= S5PC100_GPI_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPI(0),
+			.ngpio	= S5PC100_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5PC100_GPJ0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ0(0),
+			.ngpio	= S5PC100_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.base	= S5PC100_GPJ1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ1(0),
+			.ngpio	= S5PC100_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.base	= S5PC100_GPJ2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ2(0),
+			.ngpio	= S5PC100_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.base	= S5PC100_GPJ3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ3(0),
+			.ngpio	= S5PC100_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.base	= S5PC100_GPJ4_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ4(0),
+			.ngpio	= S5PC100_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.base	= S5PC100_GPK0_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK0(0),
+			.ngpio	= S5PC100_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.base	= S5PC100_GPK1_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK1(0),
+			.ngpio	= S5PC100_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.base	= S5PC100_GPK2_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK2(0),
+			.ngpio	= S5PC100_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.base	= S5PC100_GPK3_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK3(0),
+			.ngpio	= S5PC100_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.base	= S5PC100_GPL0_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL0(0),
+			.ngpio	= S5PC100_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.base	= S5PC100_GPL1_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL1(0),
+			.ngpio	= S5PC100_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.base	= S5PC100_GPL2_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL2(0),
+			.ngpio	= S5PC100_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.base	= S5PC100_GPL3_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL3(0),
+			.ngpio	= S5PC100_GPIO_L3_NR,
+			.label	= "GPL3",
+		},
+	}, {
+		.base	= S5PC100_GPL4_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL4(0),
+			.ngpio	= S5PC100_GPIO_L4_NR,
+			.label	= "GPL4",
+		},
+	},
+};
+
+/* FIXME move from irq-gpio.c */
+extern struct irq_chip s5pc100_gpioint;
+extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
+
+static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
+{
+	/* Interrupt */
+	if (chip->config == &gpio_cfg) {
+		int i, irq;
+
+		chip->chip.to_irq = s5pc100_gpiolib_to_irq;
+
+		for (i = 0;  i < chip->chip.ngpio; i++) {
+			irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
+			set_irq_chip(irq, &s5pc100_gpioint);
+			set_irq_data(irq, &chip->chip);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID);
+		}
+	} else if (chip->config == &gpio_cfg_eint) {
+		chip->chip.to_irq = s5pc100_gpiolib_to_eint;
+	}
+}
+
+static __init int s5pc100_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chip;
+	int nr_chips;
+
+	chip = s5pc100_gpio_chips;
+	nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+
+	for (; nr_chips > 0; nr_chips--, chip++)
+		s5pc100_gpiolib_link(chip);
+
+	samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips,
+				       ARRAY_SIZE(s5pc100_gpio_chips));
+
+	/* Interrupt */
+	set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler);
+
+	return 0;
+}
+core_initcall(s5pc100_gpiolib_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/debug-macro.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -22,12 +22,14 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx, tmp
+	.macro addruart, rx, rtmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C_PA_UART
-		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+		ldrne	\rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
 		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
 	.endm
 
 /* include the reset of the code which will do the work, we're only
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/dma.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/dma.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/dma.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/dma.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/entry-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/entry-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/entry-macro.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/entry-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -20,7 +20,7 @@
 	.endm
 
 	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =S3C_VA_VIC0
+	ldr	\base, =VA_VIC0
 	.endm
 
 	.macro	arch_ret_to_user, tmp1, tmp2
@@ -29,18 +29,18 @@
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 
 	@ check the vic0
-	mov	\irqnr, # S3C_IRQ_OFFSET + 31
+	mov	\irqnr, # S5P_IRQ_OFFSET + 31
 	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
 	teq	\irqstat, #0
 
 	@ otherwise try vic1
-	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
 	addeq	\irqnr, \irqnr, #32
 	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
 	teqeq	\irqstat, #0
 
 	@ otherwise try vic2
-	addeq	\tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+	addeq	\tmp, \base, #(VA_VIC2 - VA_VIC0)
 	addeq	\irqnr, \irqnr, #32
 	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
 	teqeq	\irqstat, #0
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -12,6 +12,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
 #define gpio_get_value	__gpio_get_value
 #define gpio_set_value	__gpio_set_value
 #define gpio_cansleep	__gpio_cansleep
@@ -52,11 +55,6 @@
 #define S5PC100_GPIO_L2_NR	(8)
 #define S5PC100_GPIO_L3_NR	(8)
 #define S5PC100_GPIO_L4_NR	(8)
-#define S5PC100_GPIO_MP00_NR	(8)
-#define S5PC100_GPIO_MP01_NR	(8)
-#define S5PC100_GPIO_MP02_NR	(8)
-#define S5PC100_GPIO_MP03_NR	(8)
-#define S5PC100_GPIO_MP04_NR	(5)
 
 /* GPIO bank numbes */
 
@@ -65,50 +63,45 @@
  * change from one gpio bank to another can be caught.
 */
 
-#define S5PC1XX_GPIO_NEXT(__gpio) \
+#define S5PC100_GPIO_NEXT(__gpio) \
 	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
 
-enum s3c_gpio_number {
+enum s5p_gpio_number {
 	S5PC100_GPIO_A0_START	= 0,
-	S5PC100_GPIO_A1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A0),
-	S5PC100_GPIO_B_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A1),
-	S5PC100_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_B),
-	S5PC100_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_C),
-	S5PC100_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_D),
-	S5PC100_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E0),
-	S5PC100_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E1),
-	S5PC100_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F0),
-	S5PC100_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F1),
-	S5PC100_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F2),
-	S5PC100_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F3),
-	S5PC100_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G0),
-	S5PC100_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G1),
-	S5PC100_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G2),
-	S5PC100_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G3),
-	S5PC100_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H0),
-	S5PC100_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H1),
-	S5PC100_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H2),
-	S5PC100_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H3),
-	S5PC100_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_I),
-	S5PC100_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J0),
-	S5PC100_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J1),
-	S5PC100_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J2),
-	S5PC100_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J3),
-	S5PC100_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J4),
-	S5PC100_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K0),
-	S5PC100_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K1),
-	S5PC100_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K2),
-	S5PC100_GPIO_L0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K3),
-	S5PC100_GPIO_L1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L0),
-	S5PC100_GPIO_L2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L1),
-	S5PC100_GPIO_L3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L2),
-	S5PC100_GPIO_L4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L3),
-	S5PC100_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L4),
-	S5PC100_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP00),
-	S5PC100_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP01),
-	S5PC100_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP02),
-	S5PC100_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP03),
-	S5PC100_GPIO_END	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP04),
+	S5PC100_GPIO_A1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_A0),
+	S5PC100_GPIO_B_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_A1),
+	S5PC100_GPIO_C_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_B),
+	S5PC100_GPIO_D_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_C),
+	S5PC100_GPIO_E0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_D),
+	S5PC100_GPIO_E1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_E0),
+	S5PC100_GPIO_F0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_E1),
+	S5PC100_GPIO_F1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F0),
+	S5PC100_GPIO_F2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F1),
+	S5PC100_GPIO_F3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F2),
+	S5PC100_GPIO_G0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_F3),
+	S5PC100_GPIO_G1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G0),
+	S5PC100_GPIO_G2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G1),
+	S5PC100_GPIO_G3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G2),
+	S5PC100_GPIO_H0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_G3),
+	S5PC100_GPIO_H1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H0),
+	S5PC100_GPIO_H2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H1),
+	S5PC100_GPIO_H3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H2),
+	S5PC100_GPIO_I_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_H3),
+	S5PC100_GPIO_J0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_I),
+	S5PC100_GPIO_J1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J0),
+	S5PC100_GPIO_J2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J1),
+	S5PC100_GPIO_J3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J2),
+	S5PC100_GPIO_J4_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J3),
+	S5PC100_GPIO_K0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_J4),
+	S5PC100_GPIO_K1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K0),
+	S5PC100_GPIO_K2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K1),
+	S5PC100_GPIO_K3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K2),
+	S5PC100_GPIO_L0_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_K3),
+	S5PC100_GPIO_L1_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L0),
+	S5PC100_GPIO_L2_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L1),
+	S5PC100_GPIO_L3_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L2),
+	S5PC100_GPIO_L4_START	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L3),
+	S5PC100_GPIO_END	= S5PC100_GPIO_NEXT(S5PC100_GPIO_L4),
 };
 
 /* S5PC100 GPIO number definitions. */
@@ -146,17 +139,20 @@
 #define S5PC100_GPL2(_nr)	(S5PC100_GPIO_L2_START + (_nr))
 #define S5PC100_GPL3(_nr)	(S5PC100_GPIO_L3_START + (_nr))
 #define S5PC100_GPL4(_nr)	(S5PC100_GPIO_L4_START + (_nr))
-#define S5PC100_MP00(_nr)	(S5PC100_GPIO_MP00_START + (_nr))
-#define S5PC100_MP01(_nr)	(S5PC100_GPIO_MP01_START + (_nr))
-#define S5PC100_MP02(_nr)	(S5PC100_GPIO_MP02_START + (_nr))
-#define S5PC100_MP03(_nr)	(S5PC100_GPIO_MP03_START + (_nr))
-#define S5PC100_MP04(_nr)	(S5PC100_GPIO_MP04_START + (_nr))
-#define S5PC100_MP05(_nr)	(S5PC100_GPIO_MP05_START + (_nr))
 
-/* It used the end of the S5PC1XX gpios */
+/* It used the end of the S5PC100 gpios */
 #define S3C_GPIO_END		S5PC100_GPIO_END
 
 /* define the number of gpios we need to the one after the MP04() range */
 #define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
 
+#define EINT_MODE		S3C_GPIO_SFN(0x2)
+
+#define EINT_GPIO_0(x)		S5PC100_GPH0(x)
+#define EINT_GPIO_1(x)		S5PC100_GPH1(x)
+#define EINT_GPIO_2(x)		S5PC100_GPH2(x)
+#define EINT_GPIO_3(x)		S5PC100_GPH3(x)
+
 #include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -11,9 +11,104 @@
 
 #include <plat/irqs.h>
 
-/* LCD */
+/* VIC0: system, DMA, timer */
+#define IRQ_EINT16_31		S5P_IRQ_VIC0(16)
+#define IRQ_BATF		S5P_IRQ_VIC0(17)
+#define IRQ_MDMA		S5P_IRQ_VIC0(18)
+#define IRQ_PDMA0		S5P_IRQ_VIC0(19)
+#define IRQ_PDMA1		S5P_IRQ_VIC0(20)
+#define IRQ_TIMER0_VIC		S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC		S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC		S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC		S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC		S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5P_IRQ_VIC0(26)
+#define IRQ_WDT			S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5P_IRQ_VIC0(30)
+
+/* VIC1: ARM, power, memory, connectivity */
+#define IRQ_CORTEX0		S5P_IRQ_VIC1(0)
+#define IRQ_CORTEX1		S5P_IRQ_VIC1(1)
+#define IRQ_CORTEX2		S5P_IRQ_VIC1(2)
+#define IRQ_CORTEX3		S5P_IRQ_VIC1(3)
+#define IRQ_CORTEX4		S5P_IRQ_VIC1(4)
+#define IRQ_IEMAPC		S5P_IRQ_VIC1(5)
+#define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
+#define IRQ_ONENAND		S5P_IRQ_VIC1(7)
+#define IRQ_NFC			S5P_IRQ_VIC1(8)
+#define IRQ_CFC			S5P_IRQ_VIC1(9)
+#define IRQ_UART0		S5P_IRQ_VIC1(10)
+#define IRQ_UART1		S5P_IRQ_VIC1(11)
+#define IRQ_UART2		S5P_IRQ_VIC1(12)
+#define IRQ_UART3		S5P_IRQ_VIC1(13)
+#define IRQ_IIC			S5P_IRQ_VIC1(14)
+#define IRQ_SPI0		S5P_IRQ_VIC1(15)
+#define IRQ_SPI1		S5P_IRQ_VIC1(16)
+#define IRQ_SPI2		S5P_IRQ_VIC1(17)
+#define IRQ_IRDA		S5P_IRQ_VIC1(18)
+#define IRQ_CAN0		S5P_IRQ_VIC1(19)
+#define IRQ_CAN1		S5P_IRQ_VIC1(20)
+#define IRQ_HSIRX		S5P_IRQ_VIC1(21)
+#define IRQ_HSITX		S5P_IRQ_VIC1(22)
+#define IRQ_UHOST		S5P_IRQ_VIC1(23)
+#define IRQ_OTG			S5P_IRQ_VIC1(24)
+#define IRQ_MSM			S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0		S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1		S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2		S5P_IRQ_VIC1(28)
+#define IRQ_MIPICSI		S5P_IRQ_VIC1(29)
+#define IRQ_MIPIDSI		S5P_IRQ_VIC1(30)
+
+/* VIC2: multimedia, audio, security */
+#define IRQ_LCD0		S5P_IRQ_VIC2(0)
+#define IRQ_LCD1		S5P_IRQ_VIC2(1)
+#define IRQ_LCD2		S5P_IRQ_VIC2(2)
+#define IRQ_LCD3		S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR		S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0		S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1		S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2		S5P_IRQ_VIC2(7)
+#define IRQ_JPEG		S5P_IRQ_VIC2(8)
+#define IRQ_2D			S5P_IRQ_VIC2(9)
+#define IRQ_3D			S5P_IRQ_VIC2(10)
+#define IRQ_MIXER		S5P_IRQ_VIC2(11)
+#define IRQ_HDMI		S5P_IRQ_VIC2(12)
+#define IRQ_IIC1		S5P_IRQ_VIC2(13)
+#define IRQ_MFC			S5P_IRQ_VIC2(14)
+#define IRQ_TVENC		S5P_IRQ_VIC2(15)
+#define IRQ_I2S0		S5P_IRQ_VIC2(16)
+#define IRQ_I2S1		S5P_IRQ_VIC2(17)
+#define IRQ_I2S2		S5P_IRQ_VIC2(18)
+#define IRQ_AC97		S5P_IRQ_VIC2(19)
+#define IRQ_PCM0		S5P_IRQ_VIC2(20)
+#define IRQ_PCM1		S5P_IRQ_VIC2(21)
+#define IRQ_SPDIF		S5P_IRQ_VIC2(22)
+#define IRQ_ADC			S5P_IRQ_VIC2(23)
+#define IRQ_PENDN		S5P_IRQ_VIC2(24)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_KEYPAD		S5P_IRQ_VIC2(25)
+#define IRQ_CG			S5P_IRQ_VIC2(26)
+#define IRQ_SEC			S5P_IRQ_VIC2(27)
+#define IRQ_SECRX		S5P_IRQ_VIC2(28)
+#define IRQ_SECTX		S5P_IRQ_VIC2(29)
+#define IRQ_SDMIRQ		S5P_IRQ_VIC2(30)
+#define IRQ_SDMFIQ		S5P_IRQ_VIC2(31)
+#define IRQ_VIC_END		S5P_IRQ_VIC2(31)
+
+#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
+
+#define S3C_IRQ_GPIO_BASE	(IRQ_EINT(31) + 1)
+#define S3C_IRQ_GPIO(x)		(S3C_IRQ_GPIO_BASE + (x))
+
+/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */
+#define NR_IRQS		(S3C_IRQ_GPIO(320) + 1)
+
+/* Compatibility */
 #define IRQ_LCD_FIFO		IRQ_LCD0
 #define IRQ_LCD_VSYNC		IRQ_LCD1
 #define IRQ_LCD_SYSTEM		IRQ_LCD2
 
-#endif /* __ASM_ARCH_IRQ_H */
+#endif /* __ASM_ARCH_IRQS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/map.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/map.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/map.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/map.h	2010-08-01 18:11:14.000000000 -0400
@@ -3,9 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
- * Based on mach-s3c6400/include/mach/map.h
- *
- * S5PC1XX - Memory map definitions
+ * S5PC100 - Memory map definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,6 +14,7 @@
 #define __ASM_ARCH_MAP_H __FILE__
 
 #include <plat/map-base.h>
+#include <plat/map-s5p.h>
 
 /*
  * map-base.h has already defined virtual memory address
@@ -31,25 +30,21 @@
  *
  */
 
+#define S5PC100_PA_ONENAND_BUF	(0xB0000000)
+#define S5PC100_SZ_ONENAND_BUF	(SZ_256M - SZ_32M)
+
 /* Chip ID */
+
 #define S5PC100_PA_CHIPID	(0xE0000000)
-#define S5PC1XX_PA_CHIPID	S5PC100_PA_CHIPID
-#define S5PC1XX_VA_CHIPID	S3C_VA_SYS
+#define S5P_PA_CHIPID		S5PC100_PA_CHIPID
 
-/* System */
-#define S5PC100_PA_CLK		(0xE0100000)
-#define S5PC100_PA_CLK_OTHER	(0xE0200000)
-#define S5PC100_PA_PWR		(0xE0108000)
-#define S5PC1XX_PA_CLK		S5PC100_PA_CLK
-#define S5PC1XX_PA_PWR		S5PC100_PA_PWR
-#define S5PC1XX_PA_CLK_OTHER	S5PC100_PA_CLK_OTHER
-#define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
-#define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
-#define S5PC1XX_VA_CLK_OTHER	(S3C_VA_SYS + 0x30000)
+#define S5PC100_PA_SYSCON	(0xE0100000)
+#define S5P_PA_SYSCON		S5PC100_PA_SYSCON
 
-/* GPIO */
-#define S5PC100_PA_GPIO		(0xE0300000)
-#define S5PC1XX_PA_GPIO		S5PC100_PA_GPIO
+#define S5PC100_PA_OTHERS	(0xE0200000)
+#define S5PC100_VA_OTHERS	(S3C_VA_SYS + 0x10000)
+
+#define S5P_PA_GPIO		(0xE0300000)
 #define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
 
 /* Interrupt */
@@ -59,6 +54,12 @@
 #define S5PC100_VA_VIC_OFFSET	0x10000
 #define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
 #define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+#define S5P_PA_VIC0		S5PC1XX_PA_VIC(0)
+#define S5P_PA_VIC1		S5PC1XX_PA_VIC(1)
+#define S5P_PA_VIC2		S5PC1XX_PA_VIC(2)
+
+
+#define S5PC100_PA_ONENAND	(0xE7100000)
 
 /* DMA */
 #define S5PC100_PA_MDMA		(0xE8100000)
@@ -67,84 +68,71 @@
 
 /* Timer */
 #define S5PC100_PA_TIMER	(0xEA000000)
-#define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
-#define S5PC1XX_VA_TIMER	S3C_VA_TIMER
+#define S5P_PA_TIMER		S5PC100_PA_TIMER
 
-/* RTC */
-#define S5PC100_PA_RTC		(0xEA300000)
+#define S5PC100_PA_SYSTIMER	(0xEA100000)
 
-/* UART */
 #define S5PC100_PA_UART		(0xEC000000)
-#define S5PC1XX_PA_UART		S5PC100_PA_UART
-#define S5PC1XX_VA_UART		S3C_VA_UART
 
-/* I2C */
-#define S5PC100_PA_I2C		(0xEC100000)
-#define S5PC100_PA_I2C1		(0xEC200000)
+#define S5P_PA_UART0		(S5PC100_PA_UART + 0x0)
+#define S5P_PA_UART1		(S5PC100_PA_UART + 0x400)
+#define S5P_PA_UART2		(S5PC100_PA_UART + 0x800)
+#define S5P_PA_UART3		(S5PC100_PA_UART + 0xC00)
+#define S5P_SZ_UART		SZ_256
+
+#define S5PC100_PA_IIC0		(0xEC100000)
+#define S5PC100_PA_IIC1		(0xEC200000)
+
+/* SPI */
+#define S5PC100_PA_SPI0		0xEC300000
+#define S5PC100_PA_SPI1		0xEC400000
+#define S5PC100_PA_SPI2		0xEC500000
 
 /* USB HS OTG */
 #define S5PC100_PA_USB_HSOTG	(0xED200000)
 #define S5PC100_PA_USB_HSPHY	(0xED300000)
 
-/* SD/MMC */
-#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
-#define S5PC100_PA_HSMMC0	S5PC100_PA_HSMMC(0)
-#define S5PC100_PA_HSMMC1	S5PC100_PA_HSMMC(1)
-#define S5PC100_PA_HSMMC2	S5PC100_PA_HSMMC(2)
-
-/* LCD */
 #define S5PC100_PA_FB		(0xEE000000)
 
-/* Multimedia */
-#define S5PC100_PA_G2D		(0xEE800000)
-#define S5PC100_PA_JPEG		(0xEE500000)
-#define S5PC100_PA_ROTATOR	(0xEE100000)
-#define S5PC100_PA_G3D		(0xEF000000)
-
-/* I2S */
 #define S5PC100_PA_I2S0		(0xF2000000)
 #define S5PC100_PA_I2S1		(0xF2100000)
 #define S5PC100_PA_I2S2		(0xF2200000)
 
+#define S5PC100_PA_AC97		0xF2300000
+
+/* PCM */
+#define S5PC100_PA_PCM0		0xF2400000
+#define S5PC100_PA_PCM1		0xF2500000
+
 /* KEYPAD */
 #define S5PC100_PA_KEYPAD	(0xF3100000)
 
-/* ADC & TouchScreen */
-#define S5PC100_PA_TSADC	(0xF3000000)
+#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
 
-/* ETC */
 #define S5PC100_PA_SDRAM	(0x20000000)
-#define S5PC1XX_PA_SDRAM	S5PC100_PA_SDRAM
+#define S5P_PA_SDRAM		S5PC100_PA_SDRAM
 
-/* compatibility defines. */
-#define S3C_PA_RTC		S5PC100_PA_RTC
+/* compatibiltiy defines. */
 #define S3C_PA_UART		S5PC100_PA_UART
-#define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
-#define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
-#define S3C_PA_UART2		(S5PC100_PA_UART + 0x800)
-#define S3C_PA_UART3		(S5PC100_PA_UART + 0xC00)
-#define S3C_VA_UART0		(S3C_VA_UART + 0x0)
-#define S3C_VA_UART1		(S3C_VA_UART + 0x400)
-#define S3C_VA_UART2		(S3C_VA_UART + 0x800)
-#define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
-#define S3C_UART_OFFSET		0x400
-#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S3C_PA_IIC		S5PC100_PA_IIC0
+#define S3C_PA_IIC1		S5PC100_PA_IIC1
 #define S3C_PA_FB		S5PC100_PA_FB
 #define S3C_PA_G2D		S5PC100_PA_G2D
 #define S3C_PA_G3D		S5PC100_PA_G3D
 #define S3C_PA_JPEG		S5PC100_PA_JPEG
 #define S3C_PA_ROTATOR		S5PC100_PA_ROTATOR
-#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
-#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
-#define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
-#define S3C_PA_IIC		S5PC100_PA_I2C
-#define S3C_PA_IIC1		S5PC100_PA_I2C1
+#define S5P_VA_VIC0		S5PC1XX_VA_VIC(0)
+#define S5P_VA_VIC1		S5PC1XX_VA_VIC(1)
+#define S5P_VA_VIC2		S5PC1XX_VA_VIC(2)
 #define S3C_PA_USB_HSOTG	S5PC100_PA_USB_HSOTG
 #define S3C_PA_USB_HSPHY	S5PC100_PA_USB_HSPHY
-#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC0
-#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC1
-#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC2
+#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC(0)
+#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC(1)
+#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC(2)
 #define S3C_PA_KEYPAD		S5PC100_PA_KEYPAD
 #define S3C_PA_TSADC		S5PC100_PA_TSADC
+#define S3C_PA_ONENAND		S5PC100_PA_ONENAND
+#define S3C_PA_ONENAND_BUF	S5PC100_PA_ONENAND_BUF
+#define S3C_SZ_ONENAND_BUF	S5PC100_SZ_ONENAND_BUF
 
 #endif /* __ASM_ARCH_C100_MAP_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/regs-clock.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/regs-clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/regs-clock.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/regs-clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,77 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PC100 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S5PC100_REG_OTHERS(x)	(S5PC100_VA_OTHERS + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK		S5P_CLKREG(0x04)
+#define S5P_EPLL_LOCK		S5P_CLKREG(0x08)
+#define S5P_HPLL_LOCK		S5P_CLKREG(0x0C)
+
+#define S5P_APLL_CON		S5P_CLKREG(0x100)
+#define S5P_MPLL_CON		S5P_CLKREG(0x104)
+#define S5P_EPLL_CON		S5P_CLKREG(0x108)
+#define S5P_HPLL_CON		S5P_CLKREG(0x10C)
+
+#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
+
+#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
+
+#define S5P_CLK_OUT		S5P_CLKREG(0x400)
+
+#define S5P_CLKGATE_D00		S5P_CLKREG(0x500)
+#define S5P_CLKGATE_D01		S5P_CLKREG(0x504)
+#define S5P_CLKGATE_D02		S5P_CLKREG(0x508)
+
+#define S5P_CLKGATE_D10		S5P_CLKREG(0x520)
+#define S5P_CLKGATE_D11		S5P_CLKREG(0x524)
+#define S5P_CLKGATE_D12		S5P_CLKREG(0x528)
+#define S5P_CLKGATE_D13		S5P_CLKREG(0x52C)
+#define S5P_CLKGATE_D14		S5P_CLKREG(0x530)
+#define S5P_CLKGATE_D15		S5P_CLKREG(0x534)
+
+#define S5P_CLKGATE_D20		S5P_CLKREG(0x540)
+
+#define S5P_CLKGATE_SCLK0	S5P_CLKREG(0x560)
+#define S5P_CLKGATE_SCLK1	S5P_CLKREG(0x564)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_D0_MASK		(0x7<<8)
+#define S5P_CLKDIV0_D0_SHIFT		(8)
+#define S5P_CLKDIV0_PCLKD0_MASK		(0x7<<12)
+#define S5P_CLKDIV0_PCLKD0_SHIFT	(12)
+
+/* CLKDIV1 */
+#define S5P_CLKDIV1_D1_MASK		(0x7<<12)
+#define S5P_CLKDIV1_D1_SHIFT		(12)
+#define S5P_CLKDIV1_PCLKD1_MASK		(0x7<<16)
+#define S5P_CLKDIV1_PCLKD1_SHIFT	(16)
+
+#define S5PC100_SWRESET		S5PC100_REG_OTHERS(0x000)
+
+#define S5PC100_SWRESET_RESETVAL	0xc100
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/regs-gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/regs-gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/regs-gpio.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/regs-gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,75 @@
+/* linux/arch/arm/plat-s5pc100/include/plat/regs-gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO register definitions
+ */
+
+#ifndef __ASM_MACH_S5PC100_REGS_GPIO_H
+#define __ASM_MACH_S5PC100_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* S5PC100 */
+#define S5PC100_GPIO_BASE	S5P_VA_GPIO
+#define S5PC100_GPA0_BASE	(S5PC100_GPIO_BASE + 0x0000)
+#define S5PC100_GPA1_BASE	(S5PC100_GPIO_BASE + 0x0020)
+#define S5PC100_GPB_BASE	(S5PC100_GPIO_BASE + 0x0040)
+#define S5PC100_GPC_BASE	(S5PC100_GPIO_BASE + 0x0060)
+#define S5PC100_GPD_BASE	(S5PC100_GPIO_BASE + 0x0080)
+#define S5PC100_GPE0_BASE	(S5PC100_GPIO_BASE + 0x00A0)
+#define S5PC100_GPE1_BASE	(S5PC100_GPIO_BASE + 0x00C0)
+#define S5PC100_GPF0_BASE	(S5PC100_GPIO_BASE + 0x00E0)
+#define S5PC100_GPF1_BASE	(S5PC100_GPIO_BASE + 0x0100)
+#define S5PC100_GPF2_BASE	(S5PC100_GPIO_BASE + 0x0120)
+#define S5PC100_GPF3_BASE	(S5PC100_GPIO_BASE + 0x0140)
+#define S5PC100_GPG0_BASE	(S5PC100_GPIO_BASE + 0x0160)
+#define S5PC100_GPG1_BASE	(S5PC100_GPIO_BASE + 0x0180)
+#define S5PC100_GPG2_BASE	(S5PC100_GPIO_BASE + 0x01A0)
+#define S5PC100_GPG3_BASE	(S5PC100_GPIO_BASE + 0x01C0)
+#define S5PC100_GPH0_BASE	(S5PC100_GPIO_BASE + 0x0C00)
+#define S5PC100_GPH1_BASE	(S5PC100_GPIO_BASE + 0x0C20)
+#define S5PC100_GPH2_BASE	(S5PC100_GPIO_BASE + 0x0C40)
+#define S5PC100_GPH3_BASE	(S5PC100_GPIO_BASE + 0x0C60)
+#define S5PC100_GPI_BASE	(S5PC100_GPIO_BASE + 0x01E0)
+#define S5PC100_GPJ0_BASE	(S5PC100_GPIO_BASE + 0x0200)
+#define S5PC100_GPJ1_BASE	(S5PC100_GPIO_BASE + 0x0220)
+#define S5PC100_GPJ2_BASE	(S5PC100_GPIO_BASE + 0x0240)
+#define S5PC100_GPJ3_BASE	(S5PC100_GPIO_BASE + 0x0260)
+#define S5PC100_GPJ4_BASE	(S5PC100_GPIO_BASE + 0x0280)
+#define S5PC100_GPK0_BASE	(S5PC100_GPIO_BASE + 0x02A0)
+#define S5PC100_GPK1_BASE	(S5PC100_GPIO_BASE + 0x02C0)
+#define S5PC100_GPK2_BASE	(S5PC100_GPIO_BASE + 0x02E0)
+#define S5PC100_GPK3_BASE	(S5PC100_GPIO_BASE + 0x0300)
+#define S5PC100_GPL0_BASE	(S5PC100_GPIO_BASE + 0x0320)
+#define S5PC100_GPL1_BASE	(S5PC100_GPIO_BASE + 0x0340)
+#define S5PC100_GPL2_BASE	(S5PC100_GPIO_BASE + 0x0360)
+#define S5PC100_GPL3_BASE	(S5PC100_GPIO_BASE + 0x0380)
+#define S5PC100_GPL4_BASE	(S5PC100_GPIO_BASE + 0x03A0)
+
+#define S5PC100EINT30CON		(S5P_VA_GPIO + 0xE00)
+#define S5P_EINT_CON(x)			(S5PC100EINT30CON + ((x) * 0x4))
+
+#define S5PC100EINT30FLTCON0		(S5P_VA_GPIO + 0xE80)
+#define S5P_EINT_FLTCON(x)		(S5PC100EINT30FLTCON0 + ((x) * 0x4))
+
+#define S5PC100EINT30MASK		(S5P_VA_GPIO + 0xF00)
+#define S5P_EINT_MASK(x)		(S5PC100EINT30MASK + ((x) * 0x4))
+
+#define S5PC100EINT30PEND		(S5P_VA_GPIO + 0xF40)
+#define S5P_EINT_PEND(x)		(S5PC100EINT30PEND + ((x) * 0x4))
+
+#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
+
+#define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
+
+/* values for S5P_EXTINT0 */
+#define S5P_EXTINT_LOWLEV		(0x00)
+#define S5P_EXTINT_HILEV		(0x01)
+#define S5P_EXTINT_FALLEDGE		(0x02)
+#define S5P_EXTINT_RISEEDGE		(0x03)
+#define S5P_EXTINT_BOTHEDGE		(0x04)
+
+#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/regs-irq.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/regs-irq.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/regs-irq.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/regs-irq.h	2010-08-01 18:11:14.000000000 -0400
@@ -3,7 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *	Byungho Min <bhmin@samsung.com>
  *
- * S5PC1XX - IRQ register definitions
+ * S5PC100 - IRQ register definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,9 +16,4 @@
 #include <mach/map.h>
 #include <asm/hardware/vic.h>
 
-/* interrupt controller */
-#define S5PC1XX_VIC0REG(x)          		((x) + S5PC1XX_VA_VIC(0))
-#define S5PC1XX_VIC1REG(x)          		((x) + S5PC1XX_VA_VIC(1))
-#define S5PC1XX_VIC2REG(x)         		((x) + S5PC1XX_VA_VIC(2))
-
 #endif /* __ASM_ARCH_REGS_IRQ_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/spi-clocks.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/spi-clocks.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/spi-clocks.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S5PC100_PLAT_SPI_CLKS_H
+#define __S5PC100_PLAT_SPI_CLKS_H __FILE__
+
+#define S5PC100_SPI_SRCCLK_PCLK		0
+#define S5PC100_SPI_SRCCLK_48M		1
+#define S5PC100_SPI_SRCCLK_SPIBUS	2
+
+#endif /* __S5PC100_PLAT_SPI_CLKS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/system.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/system.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/system.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/system.h	2010-08-01 18:11:14.000000000 -0400
@@ -3,7 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *      Byungho Min <bhmin@samsung.com>
  *
- * S5PC1XX - system implementation
+ * S5PC100 - system implementation
  *
  * Based on mach-s3c6400/include/mach/system.h
  */
@@ -13,14 +13,11 @@
 
 #include <linux/io.h>
 #include <mach/map.h>
-#include <plat/regs-clock.h>
-
-void (*s5pc1xx_idle)(void);
+#include <mach/regs-clock.h>
 
 static void arch_idle(void)
 {
-	if (s5pc1xx_idle)
-		s5pc1xx_idle();
+	/* nothing here yet */
 }
 
 static void arch_reset(char mode, const char *cmd)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/tick.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/tick.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/include/mach/tick.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/include/mach/tick.h	2010-08-01 18:11:14.000000000 -0400
@@ -20,8 +20,8 @@
  */
 static inline u32 s3c24xx_ostimer_pending(void)
 {
-	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
-	return pend & 1 << (IRQ_TIMER4_VIC - S5PC1XX_IRQ_VIC0(0));
+	u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+	return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
 }
 
 #define TICK_MAX	(0xffffffff)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/init.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/init.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/init.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/init.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,24 @@
+/* linux/arch/arm/plat-s5pc100/s5pc100-init.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* uart registration process */
+void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/irq-gpio.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/irq-gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/irq-gpio.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/irq-gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,266 @@
+/*
+ * arch/arm/mach-s5pc100/irq-gpio.c
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ *
+ * S5PC100 - Interrupt handling for IRQ_GPIO${group}(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <plat/gpio-cfg.h>
+
+#define S5P_GPIOREG(x)		(S5P_VA_GPIO + (x))
+
+#define CON_OFFSET			0x700
+#define MASK_OFFSET			0x900
+#define PEND_OFFSET			0xA00
+#define CON_OFFSET_2			0xE00
+#define MASK_OFFSET_2			0xF00
+#define PEND_OFFSET_2			0xF40
+
+#define GPIOINT_LEVEL_LOW		0x0
+#define GPIOINT_LEVEL_HIGH		0x1
+#define GPIOINT_EDGE_FALLING		0x2
+#define GPIOINT_EDGE_RISING		0x3
+#define GPIOINT_EDGE_BOTH		0x4
+
+static int group_to_con_offset(int group)
+{
+	return group << 2;
+}
+
+static int group_to_mask_offset(int group)
+{
+	return group << 2;
+}
+
+static int group_to_pend_offset(int group)
+{
+	return group << 2;
+}
+
+static int s5pc100_get_start(unsigned int group)
+{
+	switch (group) {
+	case 0: return S5PC100_GPIO_A0_START;
+	case 1: return S5PC100_GPIO_A1_START;
+	case 2: return S5PC100_GPIO_B_START;
+	case 3: return S5PC100_GPIO_C_START;
+	case 4: return S5PC100_GPIO_D_START;
+	case 5: return S5PC100_GPIO_E0_START;
+	case 6: return S5PC100_GPIO_E1_START;
+	case 7: return S5PC100_GPIO_F0_START;
+	case 8: return S5PC100_GPIO_F1_START;
+	case 9: return S5PC100_GPIO_F2_START;
+	case 10: return S5PC100_GPIO_F3_START;
+	case 11: return S5PC100_GPIO_G0_START;
+	case 12: return S5PC100_GPIO_G1_START;
+	case 13: return S5PC100_GPIO_G2_START;
+	case 14: return S5PC100_GPIO_G3_START;
+	case 15: return S5PC100_GPIO_I_START;
+	case 16: return S5PC100_GPIO_J0_START;
+	case 17: return S5PC100_GPIO_J1_START;
+	case 18: return S5PC100_GPIO_J2_START;
+	case 19: return S5PC100_GPIO_J3_START;
+	case 20: return S5PC100_GPIO_J4_START;
+	default:
+		BUG();
+	}
+
+	return -EINVAL;
+}
+
+static int s5pc100_get_group(unsigned int irq)
+{
+	irq -= S3C_IRQ_GPIO(0);
+
+	switch (irq) {
+	case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
+		return 0;
+	case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
+		return 1;
+	case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
+		return 2;
+	case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
+		return 3;
+	case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
+		return 4;
+	case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
+		return 5;
+	case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
+		return 6;
+	case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
+		return 7;
+	case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
+		return 8;
+	case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
+		return 9;
+	case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
+		return 10;
+	case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
+		return 11;
+	case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
+		return 12;
+	case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
+		return 13;
+	case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
+		return 14;
+	case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
+		return 15;
+	case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
+		return 16;
+	case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
+		return 17;
+	case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
+		return 18;
+	case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
+		return 19;
+	case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
+		return 20;
+	default:
+		BUG();
+	}
+
+	return -EINVAL;
+}
+
+static int s5pc100_get_offset(unsigned int irq)
+{
+	struct gpio_chip *chip = get_irq_data(irq);
+	return irq - S3C_IRQ_GPIO(chip->base);
+}
+
+static void s5pc100_gpioint_ack(unsigned int irq)
+{
+	int group, offset, pend_offset;
+	unsigned int value;
+
+	group = s5pc100_get_group(irq);
+	offset = s5pc100_get_offset(irq);
+	pend_offset = group_to_pend_offset(group);
+
+	value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset);
+}
+
+static void s5pc100_gpioint_mask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5pc100_get_group(irq);
+	offset = s5pc100_get_offset(irq);
+	mask_offset = group_to_mask_offset(group);
+
+	value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc100_gpioint_unmask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5pc100_get_group(irq);
+	offset = s5pc100_get_offset(irq);
+	mask_offset = group_to_mask_offset(group);
+
+	value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
+	value &= ~(1 << offset);
+	__raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc100_gpioint_mask_ack(unsigned int irq)
+{
+	s5pc100_gpioint_mask(irq);
+	s5pc100_gpioint_ack(irq);
+}
+
+static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type)
+{
+	int group, offset, con_offset;
+	unsigned int value;
+
+	group = s5pc100_get_group(irq);
+	offset = s5pc100_get_offset(irq);
+	con_offset = group_to_con_offset(group);
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No irq type\n");
+		return -EINVAL;
+	case IRQ_TYPE_EDGE_RISING:
+		type = GPIOINT_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		type = GPIOINT_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		type = GPIOINT_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		type = GPIOINT_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		type = GPIOINT_LEVEL_LOW;
+		break;
+	default:
+		BUG();
+	}
+
+
+	value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset);
+	value &= ~(0xf << (offset * 0x4));
+	value |= (type << (offset * 0x4));
+	__raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset);
+
+	return 0;
+}
+
+struct irq_chip s5pc100_gpioint = {
+	.name		= "GPIO",
+	.ack		= s5pc100_gpioint_ack,
+	.mask		= s5pc100_gpioint_mask,
+	.mask_ack	= s5pc100_gpioint_mask_ack,
+	.unmask		= s5pc100_gpioint_unmask,
+	.set_type	= s5pc100_gpioint_set_type,
+};
+
+void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int group, offset, pend_offset, mask_offset;
+	int real_irq, group_end;
+	unsigned int pend, mask;
+
+	group_end = 21;
+
+	for (group = 0; group < group_end; group++) {
+		pend_offset = group_to_pend_offset(group);
+		pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
+		if (!pend)
+			continue;
+
+		mask_offset = group_to_mask_offset(group);
+		mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
+		pend &= ~mask;
+
+		for (offset = 0; offset < 8; offset++) {
+			if (pend & (1 << offset)) {
+				real_irq = s5pc100_get_start(group) + offset;
+				generic_handle_irq(S3C_IRQ_GPIO(real_irq));
+			}
+		}
+	}
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -5,18 +5,36 @@
 
 # Configuration options for the S5PC100 CPU
 
+if ARCH_S5PC100
+
 config CPU_S5PC100
 	bool
-	select CPU_S5PC100_INIT
-	select CPU_S5PC100_CLOCK
+	select PLAT_S5P
+	select S5P_EXT_INT
+	select S3C_PL330_DMA
 	help
 	  Enable S5PC100 CPU support
 
+config S5PC100_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S5PC1XX with an 24bpp RGB display helper.
+
+config S5PC100_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
 config S5PC100_SETUP_SDHCI
-        bool
-        select S5PC1XX_SETUP_SDHCI_GPIO
-        help
-          Internal helper functions for S5PC100 based SDHCI systems
+	bool
+	select S5PC100_SETUP_SDHCI_GPIO
+	help
+	  Internal helper functions for S5PC100 based SDHCI systems
+
+config S5PC100_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
 
 config MACH_SMDKC100
 	bool "SMDKC100"
@@ -26,9 +44,10 @@
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
-	select S5PC1XX_SETUP_I2C0
-	select S5PC1XX_SETUP_I2C1
-	select S5PC1XX_SETUP_FB_24BPP
+	select S5PC100_SETUP_FB_24BPP
+	select S5PC100_SETUP_I2C1
 	select S5PC100_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDKC100
+
+endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/mach-smdkc100.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/mach-smdkc100.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/mach-smdkc100.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/mach-smdkc100.c	2010-08-01 18:11:14.000000000 -0400
@@ -35,7 +35,6 @@
 
 #include <plat/regs-serial.h>
 #include <plat/gpio-cfg.h>
-#include <plat/regs-gpio.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
@@ -44,38 +43,48 @@
 #include <plat/fb.h>
 #include <plat/iic.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
-#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
-#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PC100_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PC100_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PC100_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S3C2440_UFCON_RXTRIG8 |	\
+				 S3C2440_UFCON_TXTRIG16)
 
 static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = S5PC100_UCON_DEFAULT,
+		.ulcon	     = S5PC100_ULCON_DEFAULT,
+		.ufcon	     = S5PC100_UFCON_DEFAULT,
 	},
 	[1] = {
 		.hwport	     = 1,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = S5PC100_UCON_DEFAULT,
+		.ulcon	     = S5PC100_ULCON_DEFAULT,
+		.ufcon	     = S5PC100_UFCON_DEFAULT,
 	},
 	[2] = {
 		.hwport	     = 2,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = S5PC100_UCON_DEFAULT,
+		.ulcon	     = S5PC100_ULCON_DEFAULT,
+		.ufcon	     = S5PC100_UFCON_DEFAULT,
 	},
 	[3] = {
 		.hwport	     = 3,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = S5PC100_UCON_DEFAULT,
+		.ulcon	     = S5PC100_ULCON_DEFAULT,
+		.ufcon	     = S5PC100_UFCON_DEFAULT,
 	},
 };
 
@@ -119,8 +128,7 @@
 static struct s3c_fb_pd_win smdkc100_fb_win0 = {
 	/* this is to ensure we use win0 */
 	.win_mode	= {
-		.refresh	= 70,
-		.pixclock	= (8+13+3+800)*(7+5+1+480),
+		.pixclock = 1000000000000ULL / ((8+13+3+800)*(7+5+1+480)*80),
 		.left_margin	= 8,
 		.right_margin	= 13,
 		.upper_margin	= 7,
@@ -141,8 +149,6 @@
 	.setup_gpio	= s5pc100_fb_gpio_setup_24bpp,
 };
 
-static struct map_desc smdkc100_iodesc[] = {};
-
 static struct platform_device *smdkc100_devices[] __initdata = {
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
@@ -151,11 +157,13 @@
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
 	&smdkc100_lcd_powerdev,
+	&s5pc100_device_iis0,
+	&s5pc100_device_ac97,
 };
 
 static void __init smdkc100_map_io(void)
 {
-	s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
 }
@@ -179,10 +187,9 @@
 
 MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.phys_io	= S5PC100_PA_UART & 0xfff00000,
-	.io_pg_offst	= (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S5PC100_PA_SDRAM + 0x100,
-
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
 	.init_irq	= s5pc100_init_irq,
 	.map_io		= smdkc100_map_io,
 	.init_machine	= smdkc100_machine_init,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -11,11 +11,24 @@
 
 # Core support for S5PC100 system
 
-obj-$(CONFIG_CPU_S5PC100)	+= cpu.o
+obj-$(CONFIG_CPU_S5PC100)	+= cpu.o init.o clock.o gpiolib.o irq-gpio.o
+obj-$(CONFIG_CPU_S5PC100)	+= setup-i2c0.o
+obj-$(CONFIG_CPU_S5PC100)	+= dma.o
 
 # Helper and device support
 
-obj-$(CONFIG_S5PC100_SETUP_SDHCI)       += setup-sdhci.o
+obj-$(CONFIG_S5PC100_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1)	+= setup-i2c1.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI)	+= setup-sdhci.o
+obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+
+# device support
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
 
 # machine support
+
 obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
+
+# device support
+obj-y				+= dev-audio.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/setup-fb-24bpp.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/setup-fb-24bpp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/setup-fb-24bpp.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/setup-fb-24bpp.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,48 @@
+/*
+ * linux/arch/arm/mach-s5pc100/setup-fb-24bpp.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * Base S5PC100 setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+#define DISR_OFFSET	0x7008
+
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio = 0;
+
+	for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/setup-i2c0.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/setup-i2c0.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/setup-i2c0.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/setup-i2c0.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pc100/setup-i2c0.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC100 I2C bus 0 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/setup-i2c1.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/setup-i2c1.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/setup-i2c1.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/setup-i2c1.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pc100/setup-i2c1.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC100 I2C bus 1 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <linux/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/setup-sdhci-gpio.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/setup-sdhci-gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pc100/setup-sdhci-gpio.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pc100/setup-sdhci-gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s5pc100/setup-sdhci-gpio.c
+ *
+ * Copyright 2009 Samsung Eletronics
+ *
+ * S5PC100 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+
+void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+	unsigned int num;
+
+	num = width;
+	/* In case of 8 width, we should decrease the 2 */
+	if (width == 8)
+		num = width - 2;
+
+	end = S5PC100_GPG0(2 + num);
+
+	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
+	for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	if (width == 8) {
+		for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S5PC100_GPG2(2 + width);
+
+	/* Set all the necessary GPG2 pins to special-function 2 */
+	for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S5PC100_GPG3(2 + width);
+
+	/* Set all the necessary GPG3 pins to special-function 2 */
+	for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -31,6 +31,128 @@
 #include <plat/clock-clksrc.h>
 #include <plat/s5pv210.h>
 
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_apll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_epll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.sources	= &clk_src_mpll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_armclk_list[] = {
+	[0] = &clk_mout_apll.clk,
+	[1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_armclk = {
+	.sources	= clkset_armclk_list,
+	.nr_sources	= ARRAY_SIZE(clkset_armclk_list),
+};
+
+static struct clksrc_clk clk_armclk = {
+	.clk	= {
+		.name		= "armclk",
+		.id		= -1,
+	},
+	.sources	= &clkset_armclk,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
+	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_hclk_msys = {
+	.clk	= {
+		.name		= "hclk_msys",
+		.id		= -1,
+		.parent		= &clk_armclk.clk,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_pclk_msys = {
+	.clk	= {
+		.name		= "pclk_msys",
+		.id		= -1,
+		.parent		= &clk_hclk_msys.clk,
+	},
+	.reg_div        = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_sclk_a2m = {
+	.clk	= {
+		.name		= "sclk_a2m",
+		.id		= -1,
+		.parent		= &clk_mout_apll.clk,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+};
+
+static struct clk *clkset_hclk_sys_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_sclk_a2m.clk,
+};
+
+static struct clksrc_sources clkset_hclk_sys = {
+	.sources	= clkset_hclk_sys_list,
+	.nr_sources	= ARRAY_SIZE(clkset_hclk_sys_list),
+};
+
+static struct clksrc_clk clk_hclk_dsys = {
+	.clk	= {
+		.name	= "hclk_dsys",
+		.id	= -1,
+	},
+	.sources	= &clkset_hclk_sys,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
+	.reg_div        = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_dsys = {
+	.clk	= {
+		.name	= "pclk_dsys",
+		.id	= -1,
+		.parent	= &clk_hclk_dsys.clk,
+	},
+	.reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk clk_hclk_psys = {
+	.clk	= {
+		.name	= "hclk_psys",
+		.id	= -1,
+	},
+	.sources	= &clkset_hclk_sys,
+	.reg_src        = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
+	.reg_div        = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_psys = {
+	.clk	= {
+		.name	= "pclk_psys",
+		.id	= -1,
+		.parent	= &clk_hclk_psys.clk,
+	},
+	.reg_div        = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
+};
+
 static int s5pv210_clk_ip0_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
@@ -51,176 +173,231 @@
 	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
 }
 
-static struct clk clk_h200 = {
-	.name		= "hclk200",
+static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable);
+}
+
+static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
+}
+
+static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable);
+}
+
+static struct clk clk_sclk_hdmi27m = {
+	.name		= "sclk_hdmi27m",
 	.id		= -1,
+	.rate		= 27000000,
 };
 
-static struct clk clk_h100 = {
-	.name		= "hclk100",
+static struct clk clk_sclk_hdmiphy = {
+	.name		= "sclk_hdmiphy",
 	.id		= -1,
 };
 
-static struct clk clk_h166 = {
-	.name		= "hclk166",
+static struct clk clk_sclk_usbphy0 = {
+	.name		= "sclk_usbphy0",
 	.id		= -1,
 };
 
-static struct clk clk_h133 = {
-	.name		= "hclk133",
+static struct clk clk_sclk_usbphy1 = {
+	.name		= "sclk_usbphy1",
 	.id		= -1,
 };
 
-static struct clk clk_p100 = {
-	.name		= "pclk100",
+static struct clk clk_pcmcdclk0 = {
+	.name		= "pcmcdclk",
 	.id		= -1,
 };
 
-static struct clk clk_p83 = {
-	.name		= "pclk83",
+static struct clk clk_pcmcdclk1 = {
+	.name		= "pcmcdclk",
 	.id		= -1,
 };
 
-static struct clk clk_p66 = {
-	.name		= "pclk66",
+static struct clk clk_pcmcdclk2 = {
+	.name		= "pcmcdclk",
 	.id		= -1,
 };
 
-static struct clk *sys_clks[] = {
-	&clk_h200,
-	&clk_h100,
-	&clk_h166,
-	&clk_h133,
-	&clk_p100,
-	&clk_p83,
-	&clk_p66
+static struct clk *clkset_vpllsrc_list[] = {
+	[0] = &clk_fin_vpll,
+	[1] = &clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources clkset_vpllsrc = {
+	.sources	= clkset_vpllsrc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk clk_vpllsrc = {
+	.clk	= {
+		.name		= "vpll_src",
+		.id		= -1,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 7),
+	},
+	.sources	= &clkset_vpllsrc,
+	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 28, .size = 1 },
+};
+
+static struct clk *clkset_sclk_vpll_list[] = {
+	[0] = &clk_vpllsrc.clk,
+	[1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources clkset_sclk_vpll = {
+	.sources	= clkset_sclk_vpll_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_vpll_list),
+};
+
+static struct clksrc_clk clk_sclk_vpll = {
+	.clk	= {
+		.name		= "sclk_vpll",
+		.id		= -1,
+	},
+	.sources	= &clkset_sclk_vpll,
+	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
+};
+
+static unsigned long s5pv210_clk_imem_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 2;
+}
+
+static struct clk_ops clk_hclk_imem_ops = {
+	.get_rate	= s5pv210_clk_imem_get_rate,
 };
 
 static struct clk init_clocks_disable[] = {
 	{
 		.name		= "rot",
 		.id		= -1,
-		.parent		= &clk_h166,
+		.parent		= &clk_hclk_dsys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1<<29),
 	}, {
 		.name		= "otg",
 		.id		= -1,
-		.parent		= &clk_h133,
+		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip1_ctrl,
 		.ctrlbit	= (1<<16),
 	}, {
 		.name		= "usb-host",
 		.id		= -1,
-		.parent		= &clk_h133,
+		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip1_ctrl,
 		.ctrlbit	= (1<<17),
 	}, {
 		.name		= "lcd",
 		.id		= -1,
-		.parent		= &clk_h166,
+		.parent		= &clk_hclk_dsys.clk,
 		.enable		= s5pv210_clk_ip1_ctrl,
 		.ctrlbit	= (1<<0),
 	}, {
 		.name		= "cfcon",
 		.id		= 0,
-		.parent		= &clk_h133,
+		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip1_ctrl,
 		.ctrlbit	= (1<<25),
 	}, {
 		.name		= "hsmmc",
 		.id		= 0,
-		.parent		= &clk_h133,
+		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip2_ctrl,
 		.ctrlbit	= (1<<16),
 	}, {
 		.name		= "hsmmc",
 		.id		= 1,
-		.parent		= &clk_h133,
+		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip2_ctrl,
 		.ctrlbit	= (1<<17),
 	}, {
 		.name		= "hsmmc",
 		.id		= 2,
-		.parent		= &clk_h133,
+		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip2_ctrl,
 		.ctrlbit	= (1<<18),
 	}, {
 		.name		= "hsmmc",
 		.id		= 3,
-		.parent		= &clk_h133,
+		.parent		= &clk_hclk_psys.clk,
 		.enable		= s5pv210_clk_ip2_ctrl,
 		.ctrlbit	= (1<<19),
 	}, {
 		.name		= "systimer",
 		.id		= -1,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<16),
 	}, {
 		.name		= "watchdog",
 		.id		= -1,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<22),
 	}, {
 		.name		= "rtc",
 		.id		= -1,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<15),
 	}, {
 		.name		= "i2c",
 		.id		= 0,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<7),
 	}, {
 		.name		= "i2c",
 		.id		= 1,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<8),
 	}, {
 		.name		= "i2c",
 		.id		= 2,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<9),
 	}, {
 		.name		= "spi",
 		.id		= 0,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<12),
 	}, {
 		.name		= "spi",
 		.id		= 1,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<13),
 	}, {
 		.name		= "spi",
 		.id		= 2,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<14),
 	}, {
 		.name		= "timers",
 		.id		= -1,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<23),
 	}, {
 		.name		= "adc",
 		.id		= -1,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<24),
 	}, {
 		.name		= "keypad",
 		.id		= -1,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<21),
 	}, {
@@ -234,118 +411,553 @@
 		.id		= 0,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<4),
+		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "i2s_v32",
 		.id		= 1,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<4),
-	}
+		.ctrlbit	= (1 << 6),
+	},
 };
 
 static struct clk init_clocks[] = {
 	{
+		.name		= "hclk_imem",
+		.id		= -1,
+		.parent		= &clk_hclk_msys.clk,
+		.ctrlbit	= (1 << 5),
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ops		= &clk_hclk_imem_ops,
+	}, {
 		.name		= "uart",
 		.id		= 0,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<7),
+		.ctrlbit	= (1 << 17),
 	}, {
 		.name		= "uart",
 		.id		= 1,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<8),
+		.ctrlbit	= (1 << 18),
 	}, {
 		.name		= "uart",
 		.id		= 2,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<9),
+		.ctrlbit	= (1 << 19),
 	}, {
 		.name		= "uart",
 		.id		= 3,
-		.parent		= &clk_p66,
+		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<10),
+		.ctrlbit	= (1 << 20),
 	},
 };
 
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
+static struct clk *clkset_uart_list[] = {
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_group1_list[] = {
+	[0] = &clk_sclk_a2m.clk,
+	[1] = &clk_mout_mpll.clk,
+	[2] = &clk_mout_epll.clk,
+	[3] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_group1 = {
+	.sources	= clkset_group1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group1_list),
+};
+
+static struct clk *clkset_sclk_onenand_list[] = {
+	[0] = &clk_hclk_psys.clk,
+	[1] = &clk_hclk_dsys.clk,
+};
+
+static struct clksrc_sources clkset_sclk_onenand = {
+	.sources	= clkset_sclk_onenand_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_onenand_list),
+};
+
+static struct clk *clkset_sclk_dac_list[] = {
+	[0] = &clk_sclk_vpll.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_dac = {
+	.sources	= clkset_sclk_dac_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk clk_sclk_dac = {
+	.clk		= {
+		.name		= "sclk_dac",
 		.id		= -1,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 2),
 	},
-	.sources	= &clk_src_apll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+	.sources	= &clkset_sclk_dac,
+	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 8, .size = 1 },
 };
 
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
+static struct clksrc_clk clk_sclk_pixel = {
+	.clk		= {
+		.name		= "sclk_pixel",
 		.id		= -1,
+		.parent		= &clk_sclk_vpll.clk,
 	},
-	.sources	= &clk_src_epll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+	.reg_div	= { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4},
 };
 
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
+static struct clk *clkset_sclk_hdmi_list[] = {
+	[0] = &clk_sclk_pixel.clk,
+	[1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_hdmi = {
+	.sources	= clkset_sclk_hdmi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk clk_sclk_hdmi = {
+	.clk		= {
+		.name		= "sclk_hdmi",
 		.id		= -1,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 0),
 	},
-	.sources	= &clk_src_mpll,
-	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+	.sources	= &clkset_sclk_hdmi,
+	.reg_src	= { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
 };
 
-static struct clk *clkset_uart_list[] = {
+static struct clk *clkset_sclk_mixer_list[] = {
+	[0] = &clk_sclk_dac.clk,
+	[1] = &clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources clkset_sclk_mixer = {
+	.sources	= clkset_sclk_mixer_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_mixer_list),
+};
+
+static struct clk *clkset_sclk_audio0_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &clk_pcmcdclk0,
+	[2] = &clk_sclk_hdmi27m,
+	[3] = &clk_sclk_usbphy0,
+	[4] = &clk_sclk_usbphy1,
+	[5] = &clk_sclk_hdmiphy,
 	[6] = &clk_mout_mpll.clk,
 	[7] = &clk_mout_epll.clk,
+	[8] = &clk_sclk_vpll.clk,
 };
 
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+static struct clksrc_sources clkset_sclk_audio0 = {
+	.sources	= clkset_sclk_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio0_list),
+};
+
+static struct clksrc_clk clk_sclk_audio0 = {
+	.clk		= {
+		.name		= "sclk_audio",
+		.id		= 0,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 24),
+	},
+	.sources = &clkset_sclk_audio0,
+	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 0, .size = 4 },
+	.reg_div = { .reg = S5P_CLK_DIV6, .shift = 0, .size = 4 },
+};
+
+static struct clk *clkset_sclk_audio1_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &clk_pcmcdclk1,
+	[2] = &clk_sclk_hdmi27m,
+	[3] = &clk_sclk_usbphy0,
+	[4] = &clk_sclk_usbphy1,
+	[5] = &clk_sclk_hdmiphy,
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+	[8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_sclk_audio1 = {
+	.sources	= clkset_sclk_audio1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio1_list),
+};
+
+static struct clksrc_clk clk_sclk_audio1 = {
+	.clk		= {
+		.name		= "sclk_audio",
+		.id		= 1,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 25),
+	},
+	.sources = &clkset_sclk_audio1,
+	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 4, .size = 4 },
+	.reg_div = { .reg = S5P_CLK_DIV6, .shift = 4, .size = 4 },
+};
+
+static struct clk *clkset_sclk_audio2_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &clk_pcmcdclk0,
+	[2] = &clk_sclk_hdmi27m,
+	[3] = &clk_sclk_usbphy0,
+	[4] = &clk_sclk_usbphy1,
+	[5] = &clk_sclk_hdmiphy,
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+	[8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_sclk_audio2 = {
+	.sources	= clkset_sclk_audio2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_audio2_list),
+};
+
+static struct clksrc_clk clk_sclk_audio2 = {
+	.clk		= {
+		.name		= "sclk_audio",
+		.id		= 2,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 26),
+	},
+	.sources = &clkset_sclk_audio2,
+	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 8, .size = 4 },
+	.reg_div = { .reg = S5P_CLK_DIV6, .shift = 8, .size = 4 },
+};
+
+static struct clk *clkset_sclk_spdif_list[] = {
+	[0] = &clk_sclk_audio0.clk,
+	[1] = &clk_sclk_audio1.clk,
+	[2] = &clk_sclk_audio2.clk,
+};
+
+static struct clksrc_sources clkset_sclk_spdif = {
+	.sources	= clkset_sclk_spdif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_sclk_spdif_list),
+};
+
+static struct clk *clkset_group2_list[] = {
+	[0] = &clk_ext_xtal_mux,
+	[1] = &clk_xusbxti,
+	[2] = &clk_sclk_hdmi27m,
+	[3] = &clk_sclk_usbphy0,
+	[4] = &clk_sclk_usbphy1,
+	[5] = &clk_sclk_hdmiphy,
+	[6] = &clk_mout_mpll.clk,
+	[7] = &clk_mout_epll.clk,
+	[8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_group2 = {
+	.sources	= clkset_group2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_group2_list),
 };
 
 static struct clksrc_clk clksrcs[] = {
 	{
 		.clk	= {
-			.name		= "uclk1",
+			.name		= "sclk_dmc",
 			.id		= -1,
-			.ctrlbit	= (1<<17),
-			.enable		= s5pv210_clk_ip3_ctrl,
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_onenand",
+			.id		= -1,
+		},
+		.sources = &clkset_sclk_onenand,
+		.reg_src = { .reg = S5P_CLK_SRC0, .shift = 28, .size = 1 },
+		.reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 },
+	}, {
+		.clk	= {
+			.name		= "uclk1",
+			.id		= 0,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 12),
 		},
 		.sources = &clkset_uart,
 		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
 		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
-	}
+	}, {
+		.clk		= {
+			.name		= "uclk1",
+			.id		= 1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 13),
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "uclk1",
+			.id		= 2,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 14),
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "uclk1",
+			.id		= 3,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 15),
+		},
+		.sources = &clkset_uart,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_mixer",
+			.id		= -1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 1),
+		},
+		.sources = &clkset_sclk_mixer,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
+	}, {
+		.clk		= {
+			.name		= "sclk_spdif",
+			.id		= -1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 27),
+		},
+		.sources = &clkset_sclk_spdif,
+		.reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= 0,
+			.enable		= s5pv210_clk_mask1_ctrl,
+			.ctrlbit	= (1 << 2),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= 1,
+			.enable		= s5pv210_clk_mask1_ctrl,
+			.ctrlbit	= (1 << 3),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
+	}, {
+		.clk	= {
+			.name		= "sclk_fimc",
+			.id		= 2,
+			.enable		= s5pv210_clk_mask1_ctrl,
+			.ctrlbit	= (1 << 4),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_cam",
+			.id		= 0,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 3),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_cam",
+			.id		= 1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 4),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimd",
+			.id		= -1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 5),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 0,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 8),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 9),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 2,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 10),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mmc",
+			.id		= 3,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 11),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_mfc",
+			.id		= -1,
+			.enable		= s5pv210_clk_ip0_ctrl,
+			.ctrlbit	= (1 << 16),
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_g2d",
+			.id		= -1,
+			.enable		= s5pv210_clk_ip0_ctrl,
+			.ctrlbit	= (1 << 12),
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_g3d",
+			.id		= -1,
+			.enable		= s5pv210_clk_ip0_ctrl,
+			.ctrlbit	= (1 << 8),
+		},
+		.sources = &clkset_group1,
+		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
+		.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_csis",
+			.id		= -1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 6),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 28, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_spi",
+			.id		= 0,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 16),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_spi",
+			.id		= 1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 17),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_pwi",
+			.id		= -1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 29),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC6, .shift = 20, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV6, .shift = 24, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_pwm",
+			.id		= -1,
+			.enable		= s5pv210_clk_mask0_ctrl,
+			.ctrlbit	= (1 << 19),
+		},
+		.sources = &clkset_group2,
+		.reg_src = { .reg = S5P_CLK_SRC5, .shift = 12, .size = 4 },
+		.reg_div = { .reg = S5P_CLK_DIV5, .shift = 12, .size = 4 },
+	},
 };
 
 /* Clock initialisation code */
-static struct clksrc_clk *init_parents[] = {
+static struct clksrc_clk *sysclks[] = {
 	&clk_mout_apll,
 	&clk_mout_epll,
 	&clk_mout_mpll,
+	&clk_armclk,
+	&clk_hclk_msys,
+	&clk_sclk_a2m,
+	&clk_hclk_dsys,
+	&clk_hclk_psys,
+	&clk_pclk_msys,
+	&clk_pclk_dsys,
+	&clk_pclk_psys,
+	&clk_vpllsrc,
+	&clk_sclk_vpll,
+	&clk_sclk_dac,
+	&clk_sclk_pixel,
+	&clk_sclk_hdmi,
 };
 
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
 void __init_or_cpufreq s5pv210_setup_clocks(void)
 {
 	struct clk *xtal_clk;
 	unsigned long xtal;
+	unsigned long vpllsrc;
 	unsigned long armclk;
-	unsigned long hclk200;
-	unsigned long hclk166;
-	unsigned long hclk133;
-	unsigned long pclk100;
-	unsigned long pclk83;
-	unsigned long pclk66;
+	unsigned long hclk_msys;
+	unsigned long hclk_dsys;
+	unsigned long hclk_psys;
+	unsigned long pclk_msys;
+	unsigned long pclk_dsys;
+	unsigned long pclk_psys;
 	unsigned long apll;
 	unsigned long mpll;
 	unsigned long epll;
+	unsigned long vpll;
 	unsigned int ptr;
 	u32 clkdiv0, clkdiv1;
 
@@ -368,59 +980,46 @@
 	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
 	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
 	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
-
-	printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld",
-			apll, mpll, epll);
-
-	armclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_APLL);
-	if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX200_MASK)
-		hclk200 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
-	else
-		hclk200 = armclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
-
-	if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX166_MASK) {
-		hclk166 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M);
-		hclk166 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166);
-	} else
-		hclk166 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166);
-
-	if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX133_MASK) {
-		hclk133 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M);
-		hclk133 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133);
-	} else
-		hclk133 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133);
-
-	pclk100 = hclk200 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK100);
-	pclk83 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK83);
-	pclk66 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK66);
-
-	printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld, \
-			HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
-	       armclk, hclk200, hclk166, hclk133, pclk100, pclk83, pclk66);
+	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+	vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502);
 
 	clk_fout_apll.rate = apll;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
+	clk_fout_vpll.rate = vpll;
 
-	clk_f.rate = armclk;
-	clk_h.rate = hclk133;
-	clk_p.rate = pclk66;
-	clk_p66.rate = pclk66;
-	clk_p83.rate = pclk83;
-	clk_h133.rate = hclk133;
-	clk_h166.rate = hclk166;
-	clk_h200.rate = hclk200;
+	printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
+			apll, mpll, epll, vpll);
 
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c_set_clksrc(init_parents[ptr], true);
+	armclk = clk_get_rate(&clk_armclk.clk);
+	hclk_msys = clk_get_rate(&clk_hclk_msys.clk);
+	hclk_dsys = clk_get_rate(&clk_hclk_dsys.clk);
+	hclk_psys = clk_get_rate(&clk_hclk_psys.clk);
+	pclk_msys = clk_get_rate(&clk_pclk_msys.clk);
+	pclk_dsys = clk_get_rate(&clk_pclk_dsys.clk);
+	pclk_psys = clk_get_rate(&clk_pclk_psys.clk);
+
+	printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld\n"
+			 "HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
+			armclk, hclk_msys, hclk_dsys, hclk_psys,
+			pclk_msys, pclk_dsys, pclk_psys);
+
+	clk_f.rate = armclk;
+	clk_h.rate = hclk_psys;
+	clk_p.rate = pclk_psys;
 
 	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
 		s3c_set_clksrc(&clksrcs[ptr], true);
 }
 
 static struct clk *clks[] __initdata = {
-	&clk_mout_epll.clk,
-	&clk_mout_mpll.clk,
+	&clk_sclk_hdmi27m,
+	&clk_sclk_hdmiphy,
+	&clk_sclk_usbphy0,
+	&clk_sclk_usbphy1,
+	&clk_pcmcdclk0,
+	&clk_pcmcdclk1,
+	&clk_pcmcdclk2,
 };
 
 void __init s5pv210_register_clocks(void)
@@ -433,13 +1032,12 @@
 	if (ret > 0)
 		printk(KERN_ERR "Failed to register %u clocks\n", ret);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
-	ret = s3c24xx_register_clocks(sys_clks, ARRAY_SIZE(sys_clks));
-	if (ret > 0)
-		printk(KERN_ERR "Failed to register system clocks\n");
-
 	clkp = init_clocks_disable;
 	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
 		ret = s3c24xx_register_clock(clkp);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/cpu.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/cpu.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/cpu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/cpu.c	2010-08-01 18:11:14.000000000 -0400
@@ -32,6 +32,8 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/s5pv210.h>
+#include <plat/iic-core.h>
+#include <plat/sdhci.h>
 
 /* Initial IO mappings */
 
@@ -74,7 +76,21 @@
 
 void __init s5pv210_map_io(void)
 {
+#ifdef CONFIG_S3C_DEV_ADC
+	s3c_device_adc.name	= "s3c64xx-adc";
+#endif
+
 	iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+
+	/* initialise device information early */
+	s5pv210_default_sdhci0();
+	s5pv210_default_sdhci1();
+	s5pv210_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+	s3c_i2c2_setname("s3c2440-i2c");
 }
 
 void __init s5pv210_init_clocks(int xtal)
@@ -100,7 +116,7 @@
 	s5p_init_irq(vic, ARRAY_SIZE(vic));
 }
 
-static struct sysdev_class s5pv210_sysclass = {
+struct sysdev_class s5pv210_sysclass = {
 	.name	= "s5pv210-core",
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/dev-audio.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/dev-audio.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/dev-audio.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/dev-audio.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,327 @@
+/* linux/arch/arm/mach-s5pv210/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5pv210_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case 1:
+		s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(2));
+		break;
+
+	case 2:
+		s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(4));
+		break;
+
+	case -1:
+		s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2));
+		break;
+
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+	.cfg_gpio = s5pv210_cfg_i2s,
+};
+
+static struct resource s5pv210_iis0_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_IIS0,
+		.end   = S5PV210_PA_IIS0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S0_TX,
+		.end   = DMACH_I2S0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S0_RX,
+		.end   = DMACH_I2S0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv210_device_iis0 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5pv210_iis0_resource),
+	.resource	  = s5pv210_iis0_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+static struct resource s5pv210_iis1_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_IIS1,
+		.end   = S5PV210_PA_IIS1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S1_TX,
+		.end   = DMACH_I2S1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S1_RX,
+		.end   = DMACH_I2S1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv210_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pv210_iis1_resource),
+	.resource	  = s5pv210_iis1_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+static struct resource s5pv210_iis2_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_IIS2,
+		.end   = S5PV210_PA_IIS2 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_I2S2_TX,
+		.end   = DMACH_I2S2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_I2S2_RX,
+		.end   = DMACH_I2S2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv210_device_iis2 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s5pv210_iis2_resource),
+	.resource	  = s5pv210_iis2_resource,
+	.dev = {
+		.platform_data = &s3c_i2s_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(3));
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(3));
+		break;
+	case 2:
+		s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(2));
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+	.cfg_gpio = s5pv210_pcm_cfg_gpio,
+};
+
+static struct resource s5pv210_pcm0_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_PCM0,
+		.end   = S5PV210_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv210_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5pv210_pcm0_resource),
+	.resource	  = s5pv210_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pv210_pcm1_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_PCM1,
+		.end   = S5PV210_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv210_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pv210_pcm1_resource),
+	.resource	  = s5pv210_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pv210_pcm2_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_PCM2,
+		.end   = S5PV210_PA_PCM2 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM2_TX,
+		.end   = DMACH_PCM2_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM2_RX,
+		.end   = DMACH_PCM2_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv210_device_pcm2 = {
+	.name		  = "samsung-pcm",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s5pv210_pcm2_resource),
+	.resource	  = s5pv210_pcm2_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(4));
+	s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(4));
+
+	return 0;
+}
+
+static struct resource s5pv210_ac97_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_AC97,
+		.end   = S5PV210_PA_AC97 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_AC97_PCMOUT,
+		.end   = DMACH_AC97_PCMOUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_AC97_PCMIN,
+		.end   = DMACH_AC97_PCMIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = DMACH_AC97_MICIN,
+		.end   = DMACH_AC97_MICIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.start = IRQ_AC97,
+		.end   = IRQ_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+	.cfg_gpio = s5pv210_ac97_cfg_gpio,
+};
+
+static u64 s5pv210_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv210_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s5pv210_ac97_resource),
+	.resource	  = s5pv210_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s5pv210_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/dev-onenand.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/dev-onenand.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/dev-onenand.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/dev-onenand.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/arm/mach-s5pv210/dev-onenand.c
+ *
+ *  Copyright (c) 2008-2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5PC110 series device definition for OneNAND devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+static struct resource s5pc110_onenand_resources[] = {
+	[0] = {
+		.start	= S5PC110_PA_ONENAND,
+		.end	= S5PC110_PA_ONENAND + SZ_128K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= S5PC110_PA_ONENAND_DMA,
+		.end	= S5PC110_PA_ONENAND_DMA + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s5pc110_device_onenand = {
+	.name		= "s5pc110-onenand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5pc110_onenand_resources),
+	.resource	= s5pc110_onenand_resources,
+};
+
+void s5pc110_onenand_set_platdata(struct onenand_platform_data *pdata)
+{
+	struct onenand_platform_data *pd;
+
+	pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
+	if (!pd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	s5pc110_device_onenand.dev.platform_data = pd;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/dev-spi.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/dev-spi.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/dev-spi.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/dev-spi.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,178 @@
+/* linux/arch/arm/mach-s5pv210/dev-spi.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
+#include <mach/spi-clocks.h>
+
+#include <plat/s3c64xx-spi.h>
+#include <plat/gpio-cfg.h>
+
+static char *spi_src_clks[] = {
+	[S5PV210_SPI_SRCCLK_PCLK] = "pclk",
+	[S5PV210_SPI_SRCCLK_SCLK] = "sclk_spi",
+};
+
+/* SPI Controller platform_devices */
+
+/* Since we emulate multi-cs capability, we do not touch the CS.
+ * The emulated CS is toggled by board specific mechanism, as it can
+ * be either some immediate GPIO or some signal out of some other
+ * chip in between ... or some yet another way.
+ * We simply do not assume anything about CS.
+ */
+static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPB(2), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PV210_GPB(2), S3C_GPIO_PULL_UP);
+		break;
+
+	case 1:
+		s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin(S5PV210_GPB(6), S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP);
+		s3c_gpio_setpull(S5PV210_GPB(6), S3C_GPIO_PULL_UP);
+		break;
+
+	default:
+		dev_err(&pdev->dev, "Invalid SPI Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s5pv210_spi0_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_SPI0,
+		.end   = S5PV210_PA_SPI0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI0_TX,
+		.end   = DMACH_SPI0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI0_RX,
+		.end   = DMACH_SPI0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
+	.cfg_gpio = s5pv210_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x1ff,
+	.rx_lvl_offset = 15,
+	.high_speed = 1,
+};
+
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv210_device_spi0 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s5pv210_spi0_resource),
+	.resource	  = s5pv210_spi0_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5pv210_spi0_pdata,
+	},
+};
+
+static struct resource s5pv210_spi1_resource[] = {
+	[0] = {
+		.start = S5PV210_PA_SPI1,
+		.end   = S5PV210_PA_SPI1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_SPI1_TX,
+		.end   = DMACH_SPI1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_SPI1_RX,
+		.end   = DMACH_SPI1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
+	.cfg_gpio = s5pv210_spi_cfg_gpio,
+	.fifo_lvl_mask = 0x7f,
+	.rx_lvl_offset = 15,
+	.high_speed = 1,
+};
+
+struct platform_device s5pv210_device_spi1 = {
+	.name		  = "s3c64xx-spi",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s5pv210_spi1_resource),
+	.resource	  = s5pv210_spi1_resource,
+	.dev = {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data = &s5pv210_spi1_pdata,
+	},
+};
+
+void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
+{
+	struct s3c64xx_spi_info *pd;
+
+	/* Reject invalid configuration */
+	if (!num_cs || src_clk_nr < 0
+			|| src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) {
+		printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
+		return;
+	}
+
+	switch (cntrlr) {
+	case 0:
+		pd = &s5pv210_spi0_pdata;
+		break;
+	case 1:
+		pd = &s5pv210_spi1_pdata;
+		break;
+	default:
+		printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
+							__func__, cntrlr);
+		return;
+	}
+
+	pd->num_cs = num_cs;
+	pd->src_clk_nr = src_clk_nr;
+	pd->src_clk_name = spi_src_clks[src_clk_nr];
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/dma.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/dma.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/dma.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5pv210_pdma0_resource[] = {
+	[0] = {
+		.start  = S5PV210_PA_PDMA0,
+		.end    = S5PV210_PA_PDMA0 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA0,
+		.end	= IRQ_PDMA0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_MAX,
+		[15] = DMACH_MAX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_SPI1_RX,
+		[19] = DMACH_SPI1_TX,
+		[20] = DMACH_MAX,
+		[21] = DMACH_MAX,
+		[22] = DMACH_AC97_MICIN,
+		[23] = DMACH_AC97_PCMIN,
+		[24] = DMACH_AC97_PCMOUT,
+		[25] = DMACH_MAX,
+		[26] = DMACH_PWM,
+		[27] = DMACH_SPDIF,
+		[28] = DMACH_MAX,
+		[29] = DMACH_MAX,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5pv210_device_pdma0 = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5pv210_pdma0_resource),
+	.resource	= s5pv210_pdma0_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pv210_pdma0_pdata,
+	},
+};
+
+static struct resource s5pv210_pdma1_resource[] = {
+	[0] = {
+		.start  = S5PV210_PA_PDMA1,
+		.end    = S5PV210_PA_PDMA1 + SZ_4K,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA1,
+		.end	= IRQ_PDMA1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
+	.peri = {
+		[0] = DMACH_UART0_RX,
+		[1] = DMACH_UART0_TX,
+		[2] = DMACH_UART1_RX,
+		[3] = DMACH_UART1_TX,
+		[4] = DMACH_UART2_RX,
+		[5] = DMACH_UART2_TX,
+		[6] = DMACH_UART3_RX,
+		[7] = DMACH_UART3_TX,
+		[8] = DMACH_MAX,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S0S_TX,
+		[12] = DMACH_I2S1_RX,
+		[13] = DMACH_I2S1_TX,
+		[14] = DMACH_I2S2_RX,
+		[15] = DMACH_I2S2_TX,
+		[16] = DMACH_SPI0_RX,
+		[17] = DMACH_SPI0_TX,
+		[18] = DMACH_SPI1_RX,
+		[19] = DMACH_SPI1_TX,
+		[20] = DMACH_MAX,
+		[21] = DMACH_MAX,
+		[22] = DMACH_PCM0_RX,
+		[23] = DMACH_PCM0_TX,
+		[24] = DMACH_PCM1_RX,
+		[25] = DMACH_PCM1_TX,
+		[26] = DMACH_MSM_REQ0,
+		[27] = DMACH_MSM_REQ1,
+		[28] = DMACH_MSM_REQ2,
+		[29] = DMACH_MSM_REQ3,
+		[30] = DMACH_PCM2_RX,
+		[31] = DMACH_PCM2_TX,
+	},
+};
+
+static struct platform_device s5pv210_device_pdma1 = {
+	.name		= "s3c-pl330",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s5pv210_pdma1_resource),
+	.resource	= s5pv210_pdma1_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pv210_pdma1_pdata,
+	},
+};
+
+static struct platform_device *s5pv210_dmacs[] __initdata = {
+	&s5pv210_device_pdma0,
+	&s5pv210_device_pdma1,
+};
+
+static int __init s5pv210_dma_init(void)
+{
+	platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs));
+
+	return 0;
+}
+arch_initcall(s5pv210_dma_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/gpiolib.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/gpiolib.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/gpiolib.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/gpiolib.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,261 @@
+/* linux/arch/arm/mach-s5pv210/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <mach/map.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+/* GPIO bank's base address given the index of the bank in the
+ * list of all gpio banks.
+ */
+#define S5PV210_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
+
+/*
+ * Following are the gpio banks in v210.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
+	{
+		.chip	= {
+			.base	= S5PV210_GPA0(0),
+			.ngpio	= S5PV210_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPA1(0),
+			.ngpio	= S5PV210_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPB(0),
+			.ngpio	= S5PV210_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPC0(0),
+			.ngpio	= S5PV210_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPC1(0),
+			.ngpio	= S5PV210_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPD0(0),
+			.ngpio	= S5PV210_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPD1(0),
+			.ngpio	= S5PV210_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPE0(0),
+			.ngpio	= S5PV210_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPE1(0),
+			.ngpio	= S5PV210_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF0(0),
+			.ngpio	= S5PV210_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF1(0),
+			.ngpio	= S5PV210_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF2(0),
+			.ngpio	= S5PV210_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPF3(0),
+			.ngpio	= S5PV210_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG0(0),
+			.ngpio	= S5PV210_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG1(0),
+			.ngpio	= S5PV210_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG2(0),
+			.ngpio	= S5PV210_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPG3(0),
+			.ngpio	= S5PV210_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPI(0),
+			.ngpio	= S5PV210_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ0(0),
+			.ngpio	= S5PV210_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ1(0),
+			.ngpio	= S5PV210_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ2(0),
+			.ngpio	= S5PV210_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ3(0),
+			.ngpio	= S5PV210_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV210_GPJ4(0),
+			.ngpio	= S5PV210_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP01(0),
+			.ngpio	= S5PV210_GPIO_MP01_NR,
+			.label	= "MP01",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP02(0),
+			.ngpio	= S5PV210_GPIO_MP02_NR,
+			.label	= "MP02",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP03(0),
+			.ngpio	= S5PV210_GPIO_MP03_NR,
+			.label	= "MP03",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC00),
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_GPH0(0),
+			.ngpio	= S5PV210_GPIO_H0_NR,
+			.label	= "GPH0",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC20),
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_GPH1(0),
+			.ngpio	= S5PV210_GPIO_H1_NR,
+			.label	= "GPH1",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC40),
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_GPH2(0),
+			.ngpio	= S5PV210_GPIO_H2_NR,
+			.label	= "GPH2",
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC60),
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_GPH3(0),
+			.ngpio	= S5PV210_GPIO_H3_NR,
+			.label	= "GPH3",
+		},
+	},
+};
+
+static __init int s5pv210_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
+	int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
+	int i = 0;
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL)
+			chip->config = &gpio_cfg;
+		if (chip->base == NULL)
+			chip->base = S5PV210_BANK_BASE(i);
+	}
+
+	samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
+
+	return 0;
+}
+core_initcall(s5pv210_gpiolib_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/dma.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/dma.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/dma.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/dma.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -18,6 +18,8 @@
 #define gpio_cansleep	__gpio_cansleep
 #define gpio_to_irq	__gpio_to_irq
 
+/* Practically, GPIO banks upto MP03 are the configurable gpio banks */
+
 /* GPIO bank sizes */
 #define S5PV210_GPIO_A0_NR	(8)
 #define S5PV210_GPIO_A1_NR	(4)
@@ -47,6 +49,10 @@
 #define S5PV210_GPIO_J3_NR	(8)
 #define S5PV210_GPIO_J4_NR	(5)
 
+#define S5PV210_GPIO_MP01_NR	(8)
+#define S5PV210_GPIO_MP02_NR	(4)
+#define S5PV210_GPIO_MP03_NR	(8)
+
 /* GPIO bank numbers */
 
 /* CONFIG_S3C_GPIO_SPACE allows the user to select extra
@@ -85,6 +91,9 @@
 	S5PV210_GPIO_J2_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J1),
 	S5PV210_GPIO_J3_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J2),
 	S5PV210_GPIO_J4_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J3),
+	S5PV210_GPIO_MP01_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
+	S5PV210_GPIO_MP02_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
+	S5PV210_GPIO_MP03_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
 };
 
 /* S5PV210 GPIO number definitions */
@@ -115,13 +124,16 @@
 #define S5PV210_GPJ2(_nr)	(S5PV210_GPIO_J2_START + (_nr))
 #define S5PV210_GPJ3(_nr)	(S5PV210_GPIO_J3_START + (_nr))
 #define S5PV210_GPJ4(_nr)	(S5PV210_GPIO_J4_START + (_nr))
+#define S5PV210_MP01(_nr)	(S5PV210_GPIO_MP01_START + (_nr))
+#define S5PV210_MP02(_nr)	(S5PV210_GPIO_MP02_START + (_nr))
+#define S5PV210_MP03(_nr)	(S5PV210_GPIO_MP03_START + (_nr))
 
 /* the end of the S5PV210 specific gpios */
-#define S5PV210_GPIO_END	(S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1)
+#define S5PV210_GPIO_END	(S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)
 #define S3C_GPIO_END		S5PV210_GPIO_END
 
-/* define the number of gpios we need to the one after the GPJ4() range */
-#define ARCH_NR_GPIOS		(S5PV210_GPJ4(S5PV210_GPIO_J4_NR) +	\
+/* define the number of gpios we need to the one after the MP03() range */
+#define ARCH_NR_GPIOS		(S5PV210_MP03(S5PV210_GPIO_MP03_NR) +	\
 				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
 
 #include <asm-generic/gpio.h>
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -17,22 +17,6 @@
 
 /* VIC0: System, DMA, Timer */
 
-#define IRQ_EINT0		S5P_IRQ_VIC0(0)
-#define IRQ_EINT1		S5P_IRQ_VIC0(1)
-#define IRQ_EINT2		S5P_IRQ_VIC0(2)
-#define IRQ_EINT3		S5P_IRQ_VIC0(3)
-#define IRQ_EINT4		S5P_IRQ_VIC0(4)
-#define IRQ_EINT5		S5P_IRQ_VIC0(5)
-#define IRQ_EINT6		S5P_IRQ_VIC0(6)
-#define IRQ_EINT7		S5P_IRQ_VIC0(7)
-#define IRQ_EINT8		S5P_IRQ_VIC0(8)
-#define IRQ_EINT9		S5P_IRQ_VIC0(9)
-#define IRQ_EINT10		S5P_IRQ_VIC0(10)
-#define IRQ_EINT11		S5P_IRQ_VIC0(11)
-#define IRQ_EINT12		S5P_IRQ_VIC0(12)
-#define IRQ_EINT13		S5P_IRQ_VIC0(13)
-#define IRQ_EINT14		S5P_IRQ_VIC0(14)
-#define IRQ_EINT15		S5P_IRQ_VIC0(15)
 #define IRQ_EINT16_31		S5P_IRQ_VIC0(16)
 #define IRQ_BATF		S5P_IRQ_VIC0(17)
 #define IRQ_MDMA		S5P_IRQ_VIC0(18)
@@ -134,13 +118,15 @@
 #define IRQ_MDNIE3		S5P_IRQ_VIC3(8)
 #define IRQ_VIC_END		S5P_IRQ_VIC3(31)
 
-#define S5P_IRQ_EINT_BASE	(IRQ_VIC_END + 1)
-
-#define S5P_EINT(x)		((x) + S5P_IRQ_EINT_BASE)
-#define IRQ_EINT(x)		S5P_EINT(x)
+#define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
+#define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
 /* Set the default NR_IRQS */
+#define NR_IRQS			(IRQ_EINT(31) + 1)
 
-#define NR_IRQS 		(IRQ_EINT(31) + 1)
+/* Compatibility */
+#define IRQ_LCD_FIFO		IRQ_LCD0
+#define IRQ_LCD_VSYNC		IRQ_LCD1
+#define IRQ_LCD_SYSTEM		IRQ_LCD2
 
 #endif /* ASM_ARCH_IRQS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/map.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/map.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/map.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/map.h	2010-08-01 18:11:14.000000000 -0400
@@ -16,6 +16,9 @@
 #include <plat/map-base.h>
 #include <plat/map-s5p.h>
 
+#define S5PC110_PA_ONENAND	(0xB0000000)
+#define S5PC110_PA_ONENAND_DMA	(0xB0600000)
+
 #define S5PV210_PA_CHIPID	(0xE0000000)
 #define S5P_PA_CHIPID		S5PV210_PA_CHIPID
 
@@ -25,13 +28,21 @@
 #define S5PV210_PA_GPIO		(0xE0200000)
 #define S5P_PA_GPIO		S5PV210_PA_GPIO
 
+/* SPI */
+#define S5PV210_PA_SPI0		0xE1300000
+#define S5PV210_PA_SPI1		0xE1400000
+
 #define S5PV210_PA_IIC0		(0xE1800000)
+#define S5PV210_PA_IIC1		(0xFAB00000)
+#define S5PV210_PA_IIC2		(0xE1A00000)
 
 #define S5PV210_PA_TIMER	(0xE2500000)
 #define S5P_PA_TIMER		S5PV210_PA_TIMER
 
 #define S5PV210_PA_SYSTIMER	(0xE2600000)
 
+#define S5PV210_PA_WATCHDOG	(0xE2700000)
+
 #define S5PV210_PA_UART		(0xE2900000)
 
 #define S5P_PA_UART0		(S5PV210_PA_UART + 0x0)
@@ -43,6 +54,14 @@
 
 #define S5PV210_PA_SROMC	(0xE8000000)
 
+#define S5PV210_PA_MDMA		0xFA200000
+#define S5PV210_PA_PDMA0	0xE0900000
+#define S5PV210_PA_PDMA1	0xE0A00000
+
+#define S5PV210_PA_FB		(0xF8000000)
+
+#define S5PV210_PA_HSMMC(x)	(0xEB000000 + ((x) * 0x100000))
+
 #define S5PV210_PA_VIC0		(0xF2000000)
 #define S5P_PA_VIC0		S5PV210_PA_VIC0
 
@@ -58,8 +77,32 @@
 #define S5PV210_PA_SDRAM	(0x20000000)
 #define S5P_PA_SDRAM		S5PV210_PA_SDRAM
 
+/* I2S */
+#define S5PV210_PA_IIS0		0xEEE30000
+#define S5PV210_PA_IIS1		0xE2100000
+#define S5PV210_PA_IIS2		0xE2A00000
+
+/* PCM */
+#define S5PV210_PA_PCM0		0xE2300000
+#define S5PV210_PA_PCM1		0xE1200000
+#define S5PV210_PA_PCM2		0xE2B00000
+
+/* AC97 */
+#define S5PV210_PA_AC97		0xE2200000
+
+#define S5PV210_PA_ADC		(0xE1700000)
+
 /* compatibiltiy defines. */
 #define S3C_PA_UART		S5PV210_PA_UART
+#define S3C_PA_HSMMC0		S5PV210_PA_HSMMC(0)
+#define S3C_PA_HSMMC1		S5PV210_PA_HSMMC(1)
+#define S3C_PA_HSMMC2		S5PV210_PA_HSMMC(2)
 #define S3C_PA_IIC		S5PV210_PA_IIC0
+#define S3C_PA_IIC1		S5PV210_PA_IIC1
+#define S3C_PA_IIC2		S5PV210_PA_IIC2
+#define S3C_PA_FB		S5PV210_PA_FB
+#define S3C_PA_WDT		S5PV210_PA_WATCHDOG
+
+#define SAMSUNG_PA_ADC		S5PV210_PA_ADC
 
 #endif /* __ASM_ARCH_MAP_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/pwm-clock.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/pwm-clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/pwm-clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,13 +1,14 @@
 /* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
  *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *      http://armlinux.simtec.co.uk/
  *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
  *
  * S5PV210 - pwm clock and timer support
  *
@@ -21,14 +22,14 @@
 
 /**
  * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @cfg: The timer TCFG1 register bits shifted down to 0.
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
  *
  * Return true if the given configuration from TCFG1 is a TCLK instead
  * any of the TDIV clocks.
  */
 static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
 {
-	return tcfg == S3C2410_TCFG1_MUX_TCLK;
+	return tcfg == S3C64XX_TCFG1_MUX_TCLK;
 }
 
 /**
@@ -40,7 +41,7 @@
  */
 static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
 {
-	return 1 << (1 + tcfg1);
+	return 1 << tcfg1;
 }
 
 /**
@@ -50,7 +51,7 @@
  */
 static inline unsigned int pwm_tdiv_has_div1(void)
 {
-	return 0;
+	return 1;
 }
 
 /**
@@ -61,9 +62,9 @@
  */
 static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
 {
-	return ilog2(div) - 1;
+	return ilog2(div);
 }
 
-#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
 
 #endif /* __ASM_ARCH_PWMCLK_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/regs-clock.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/regs-clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/regs-clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/regs-clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -126,6 +126,7 @@
 
 #define S5P_RST_STAT		S5P_CLKREG(0xA000)
 #define S5P_OSC_CON		S5P_CLKREG(0x8000)
+#define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
 #define S5P_MIPI_PHY_CON0	S5P_CLKREG(0x7200)
 #define S5P_MIPI_PHY_CON1	S5P_CLKREG(0x7204)
 #define S5P_MIPI_CONTROL	S5P_CLKREG(0xE814)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/regs-fb.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/regs-fb.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/regs-fb.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/regs-fb.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,21 @@
+/* 
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Dummy framebuffer to allow build for the moment.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MACH_REGS_FB_H
+#define __ASM_ARCH_MACH_REGS_FB_H __FILE__
+
+#include <plat/regs-fb-v4.h>
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+	return 0x2400 + (window * 256 *4 ) + reg;
+}
+
+#endif /* __ASM_ARCH_MACH_REGS_FB_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/regs-gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/regs-gpio.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/regs-gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV210 - GPIO (including EINT) register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+#define S5PV210_EINT30CON		(S5P_VA_GPIO + 0xE00)
+#define S5P_EINT_CON(x)			(S5PV210_EINT30CON + ((x) * 0x4))
+
+#define S5PV210_EINT30FLTCON0		(S5P_VA_GPIO + 0xE80)
+#define S5P_EINT_FLTCON(x)		(S5PV210_EINT30FLTCON0 + ((x) * 0x4))
+
+#define S5PV210_EINT30MASK		(S5P_VA_GPIO + 0xF00)
+#define S5P_EINT_MASK(x)		(S5PV210_EINT30MASK + ((x) * 0x4))
+
+#define S5PV210_EINT30PEND		(S5P_VA_GPIO + 0xF40)
+#define S5P_EINT_PEND(x)		(S5PV210_EINT30PEND + ((x) * 0x4))
+
+#define EINT_REG_NR(x)			(EINT_OFFSET(x) >> 3)
+
+#define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
+
+/* values for S5P_EXTINT0 */
+#define S5P_EXTINT_LOWLEV		(0x00)
+#define S5P_EXTINT_HILEV		(0x01)
+#define S5P_EXTINT_FALLEDGE		(0x02)
+#define S5P_EXTINT_RISEEDGE		(0x03)
+#define S5P_EXTINT_BOTHEDGE		(0x04)
+
+#define EINT_MODE		S3C_GPIO_SFN(0xf)
+
+#define EINT_GPIO_0(x)		S5PV210_GPH0(x)
+#define EINT_GPIO_1(x)		S5PV210_GPH1(x)
+#define EINT_GPIO_2(x)		S5PV210_GPH2(x)
+#define EINT_GPIO_3(x)		S5PV210_GPH3(x)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/spi-clocks.h linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/spi-clocks.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/include/mach/spi-clocks.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/include/mach/spi-clocks.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __S5PV210_PLAT_SPI_CLKS_H
+#define __S5PV210_PLAT_SPI_CLKS_H __FILE__
+
+#define S5PV210_SPI_SRCCLK_PCLK		0
+#define S5PV210_SPI_SRCCLK_SCLK		1
+
+#endif /* __S5PV210_PLAT_SPI_CLKS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -12,18 +12,69 @@
 config CPU_S5PV210
 	bool
 	select PLAT_S5P
+	select S3C_PL330_DMA
+	select S5P_EXT_INT
 	help
 	  Enable S5PV210 CPU support
 
-choice
-	prompt "Select machine type"
-	depends on ARCH_S5PV210
-	default MACH_SMDKV210
+config S5PV210_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S5PV210_SETUP_I2C2
+	bool
+	help
+	  Common setup code for i2c bus 2.
+
+config S5PV210_SETUP_FB_24BPP
+	bool
+	help
+          Common setup code for S5PV210 with an 24bpp RGB display helper.
+
+config S5PV210_SETUP_SDHCI
+        bool
+        select S5PV210_SETUP_SDHCI_GPIO
+        help
+          Internal helper functions for S5PV210 based SDHCI systems
+
+config S5PV210_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
+# machine support
+
+config MACH_AQUILA
+	bool "Samsung Aquila"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	select S5PV210_SETUP_FB_24BPP
+	select S3C_DEV_FB
+	help
+	  Machine support for the Samsung Aquila target based on S5PC110 SoC
+
+config MACH_GONI
+	bool "GONI"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	help
+	  Machine support for Samsung GONI board
+	  S5PC110(MCP) is one of package option of S5PV210
+
+config S5PC110_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND1 controller
 
 config MACH_SMDKV210
 	bool "SMDKV210"
 	select CPU_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select S3C_DEV_WDT
+	select HAVE_S3C2410_WATCHDOG
 	help
 	  Machine support for Samsung SMDKV210
 
@@ -31,10 +82,10 @@
 	bool "SMDKC110"
 	select CPU_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
+	select S3C_DEV_WDT
+	select HAVE_S3C2410_WATCHDOG
 	help
 	  Machine support for Samsung SMDKC110
 	  S5PC110(MCP) is one of package option of S5PV210
 
-endchoice
-
 endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/mach-aquila.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/mach-aquila.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/mach-aquila.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/mach-aquila.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,149 @@
+/* linux/arch/arm/mach-s5pv210/mach-aquila.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/fb.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-fb.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/fb.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win aquila_fb_win0 = {
+	.win_mode = {
+		.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
+		.left_margin = 16,
+		.right_margin = 16,
+		.upper_margin = 3,
+		.lower_margin = 28,
+		.hsync_len = 2,
+		.vsync_len = 2,
+		.xres = 480,
+		.yres = 800,
+	},
+	.max_bpp = 32,
+	.default_bpp = 16,
+};
+
+static struct s3c_fb_pd_win aquila_fb_win1 = {
+	.win_mode = {
+		.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*60),
+		.left_margin = 16,
+		.right_margin = 16,
+		.upper_margin = 3,
+		.lower_margin = 28,
+		.hsync_len = 2,
+		.vsync_len = 2,
+		.xres = 480,
+		.yres = 800,
+	},
+	.max_bpp = 32,
+	.default_bpp = 16,
+};
+
+static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
+	.win[0]		= &aquila_fb_win0,
+	.win[1]		= &aquila_fb_win1,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+			  VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
+	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
+};
+
+static struct platform_device *aquila_devices[] __initdata = {
+	&s3c_device_fb,
+};
+
+static void __init aquila_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init aquila_machine_init(void)
+{
+	/* FB */
+	s3c_fb_set_platdata(&aquila_lcd_pdata);
+
+	platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
+}
+
+MACHINE_START(AQUILA, "Aquila")
+	/* Maintainers:
+	   Marek Szyprowski <m.szyprowski@samsung.com>
+	   Kyungmin Park <kyungmin.park@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= aquila_map_io,
+	.init_machine	= aquila_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/mach-goni.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/mach-goni.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/mach-goni.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/mach-goni.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/mach-goni.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ulcon		= S5PV210_ULCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+};
+
+static struct platform_device *goni_devices[] __initdata = {
+};
+
+static void __init goni_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
+}
+
+static void __init goni_machine_init(void)
+{
+	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
+}
+
+MACHINE_START(GONI, "GONI")
+	/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv210_init_irq,
+	.map_io		= goni_map_io,
+	.init_machine	= goni_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/mach-smdkc110.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/mach-smdkc110.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/mach-smdkc110.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/mach-smdkc110.c	2010-08-01 18:11:14.000000000 -0400
@@ -72,6 +72,9 @@
 };
 
 static struct platform_device *smdkc110_devices[] __initdata = {
+	&s5pv210_device_iis0,
+	&s5pv210_device_ac97,
+	&s3c_device_wdt,
 };
 
 static void __init smdkc110_map_io(void)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/mach-smdkv210.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/mach-smdkv210.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/mach-smdkv210.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/mach-smdkv210.c	2010-08-01 18:11:14.000000000 -0400
@@ -25,6 +25,8 @@
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -72,6 +74,17 @@
 };
 
 static struct platform_device *smdkv210_devices[] __initdata = {
+	&s5pv210_device_iis0,
+	&s5pv210_device_ac97,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&s3c_device_wdt,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
 };
 
 static void __init smdkv210_map_io(void)
@@ -83,6 +96,7 @@
 
 static void __init smdkv210_machine_init(void)
 {
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
 	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -12,9 +12,24 @@
 
 # Core support for S5PV210 system
 
-obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
 
 # machine support
 
+obj-$(CONFIG_MACH_AQUILA)	+= mach-aquila.o
 obj-$(CONFIG_MACH_SMDKV210)	+= mach-smdkv210.o
 obj-$(CONFIG_MACH_SMDKC110)	+= mach-smdkc110.o
+obj-$(CONFIG_MACH_GONI)		+= mach-goni.o
+
+# device support
+
+obj-y				+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o
+obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o
+
+obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
+obj-$(CONFIG_S5PV210_SETUP_I2C1) 	+= setup-i2c1.o
+obj-$(CONFIG_S5PV210_SETUP_I2C2) 	+= setup-i2c2.o
+obj-$(CONFIG_S5PV210_SETUP_SDHCI)       += setup-sdhci.o
+obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/setup-fb-24bpp.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/setup-fb-24bpp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/setup-fb-24bpp.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/setup-fb-24bpp.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,62 @@
+/* linux/arch/arm/plat-s5pv210/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Base s5pv210 setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+
+#include <mach/regs-fb.h>
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+
+void s5pv210_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio = 0;
+
+	for (gpio = S5PV210_GPF0(0); gpio <= S5PV210_GPF0(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPF1(0); gpio <= S5PV210_GPF1(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPF2(0); gpio <= S5PV210_GPF2(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPF3(0); gpio <= S5PV210_GPF3(3); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	/* Set DISPLAY_CONTROL register for Display path selection.
+	 *
+	 * ouput   |   RGB   |   I80   |   ITU
+	 * -----------------------------------
+	 *  00     |   MIE   |  FIMD   |  FIMD
+	 *  01     | MDNIE   | MDNIE   |  FIMD
+	 *  10     |  FIMD   |  FIMD   |  FIMD
+	 *  11     |  FIMD   |  FIMD   |  FIMD
+	 */
+	writel(0x2, S5P_MDNIE_SEL);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/setup-i2c0.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/setup-i2c0.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/setup-i2c0.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/setup-i2c0.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pv210/setup-i2c0.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPD1(0), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(0), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPD1(1), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(1), S3C_GPIO_PULL_UP);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/setup-i2c1.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/setup-i2c1.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/setup-i2c1.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/setup-i2c1.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pv210/setup-i2c1.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C1 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPD1(2), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPD1(3), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(3), S3C_GPIO_PULL_UP);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/setup-i2c2.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/setup-i2c2.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/setup-i2c2.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/setup-i2c2.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,30 @@
+/* linux/arch/arm/mach-s5pv210/setup-i2c2.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * I2C2 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/gpio.h>
+#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
+
+void s3c_i2c2_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(S5PV210_GPD1(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(4), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPD1(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PV210_GPD1(5), S3C_GPIO_PULL_UP);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/setup-sdhci.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/setup-sdhci.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/setup-sdhci.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/setup-sdhci.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,63 @@
+/* linux/arch/arm/mach-s5pv210/setup-sdhci.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pv210_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",		/* HCLK */
+	[1] = "hsmmc",		/* HCLK */
+	[2] = "sclk_mmc",	/* mmc_bus */
+	/*[4] = reserved */
+};
+
+void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
+				    void __iomem *r,
+				    struct mmc_ios *ios,
+				    struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	/* don't need to alter anything acording to card-type */
+
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/setup-sdhci-gpio.c linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-s5pv210/setup-sdhci-gpio.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-s5pv210/setup-sdhci-gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,104 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+
+void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+
+	/* Set all the necessary GPG0/GPG1 pins to special-function 2 */
+	for (gpio = S5PV210_GPG0(0); gpio < S5PV210_GPG0(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+	switch (width) {
+	case 8:
+		/* GPG1[3:6] special-funtion 3 */
+		for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	case 4:
+		/* GPG0[3:6] special-funtion 2 */
+		for (gpio = S5PV210_GPG0(3); gpio <= S5PV210_GPG0(6); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	default:
+		break;
+	}
+
+	s3c_gpio_setpull(S5PV210_GPG0(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPG0(2), S3C_GPIO_SFN(2));
+}
+
+void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+
+	/* Set all the necessary GPG1[0:1] pins to special-function 2 */
+	for (gpio = S5PV210_GPG1(0); gpio < S5PV210_GPG1(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Data pin GPG1[3:6] to special-function 2 */
+	for (gpio = S5PV210_GPG1(3); gpio <= S5PV210_GPG1(6); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PV210_GPG1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPG1(2), S3C_GPIO_SFN(2));
+}
+
+void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+
+	/* Set all the necessary GPG2[0:1] pins to special-function 2 */
+	for (gpio = S5PV210_GPG2(0); gpio < S5PV210_GPG2(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	switch (width) {
+	case 8:
+		/* Data pin GPG3[3:6] to special-function 3 */
+		for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	case 4:
+		/* Data pin GPG2[3:6] to special-function 2 */
+		for (gpio = S5PV210_GPG2(3); gpio <= S5PV210_GPG2(6); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	default:
+		break;
+	}
+
+	s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-sa1100/leds.c linux-libre-2.6.35-gnu/arch/arm/mach-sa1100/leds.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-sa1100/leds.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-sa1100/leds.c	2010-08-01 18:11:14.000000000 -0400
@@ -2,7 +2,7 @@
  * linux/arch/arm/mach-sa1100/leds.c
  *
  * SA1100 LEDs dispatcher
- * 
+ *
  * Copyright (C) 2001 Nicolas Pitre
  */
 #include <linux/compiler.h>
@@ -18,10 +18,10 @@
 {
 	if (machine_is_assabet())
 		leds_event = assabet_leds_event;
- 	if (machine_is_consus())
- 	        leds_event = consus_leds_event;
+	if (machine_is_consus())
+		leds_event = consus_leds_event;
 	if (machine_is_badge4())
-	  	leds_event = badge4_leds_event;
+		leds_event = badge4_leds_event;
 	if (machine_is_brutus())
 		leds_event = brutus_leds_event;
 	if (machine_is_cerf())
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-shark/include/mach/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-shark/include/mach/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-shark/include/mach/debug-macro.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-shark/include/mach/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -20,6 +20,9 @@
 		strb	\rd, [\rx]
 		.endm
 
+		.macro waituart,rd,rx
+		.endm
+
 		.macro	busyuart,rd,rx
 		mov	\rd, #0
 1001:		add	\rd, \rd, #1
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-shark/pci.c linux-libre-2.6.35-gnu/arch/arm/mach-shark/pci.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-shark/pci.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-shark/pci.c	2010-08-01 18:11:14.000000000 -0400
@@ -16,16 +16,19 @@
 static int __init shark_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->bus->number == 0)
-		if (dev->devfn == 0) return 255;
-		else return 11;
-	else return 255;
+		if (dev->devfn == 0)
+			return 255;
+		else
+			return 11;
+	else
+		return 255;
 }
 
 extern void __init via82c505_preinit(void);
 
 static struct hw_pci shark_pci __initdata = {
 	.setup		= via82c505_setup,
-	.swizzle     	= pci_std_swizzle,
+	.swizzle	= pci_std_swizzle,
 	.map_irq	= shark_map_irq,
 	.nr_controllers = 1,
 	.scan		= via82c505_scan_bus,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-shmobile/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-shmobile/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-shmobile/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-shmobile/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -7,7 +7,6 @@
 	select CPU_V6
 	select HAVE_CLK
 	select COMMON_CLKDEV
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_SH7377
@@ -15,7 +14,6 @@
 	select CPU_V7
 	select HAVE_CLK
 	select COMMON_CLKDEV
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
 config ARCH_SH7372
@@ -23,7 +21,6 @@
 	select CPU_V7
 	select HAVE_CLK
 	select COMMON_CLKDEV
-	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
 comment "SH-Mobile Board Type"
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/clock.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,389 @@
+/*
+ * arch/arm/mach-spear3xx/clock.c
+ *
+ * SPEAr3xx machines clock framework source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+
+/* root clks */
+/* 32 KHz oscillator clock */
+static struct clk osc_32k_clk = {
+	.flags = ALWAYS_ENABLED,
+	.rate = 32000,
+};
+
+/* 24 MHz oscillator clock */
+static struct clk osc_24m_clk = {
+	.flags = ALWAYS_ENABLED,
+	.rate = 24000000,
+};
+
+/* clock derived from 32 KHz osc clk */
+/* rtc clock */
+static struct clk rtc_clk = {
+	.pclk = &osc_32k_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = RTC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from 24 MHz osc clk */
+/* pll1 configuration structure */
+static struct pll_clk_config pll1_config = {
+	.mode_reg = PLL1_CTR,
+	.cfg_reg = PLL1_FRQ,
+};
+
+/* PLL1 clock */
+static struct clk pll1_clk = {
+	.pclk = &osc_24m_clk,
+	.en_reg = PLL1_CTR,
+	.en_reg_bit = PLL_ENABLE,
+	.recalc = &pll1_clk_recalc,
+	.private_data = &pll1_config,
+};
+
+/* PLL3 48 MHz clock */
+static struct clk pll3_48m_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &osc_24m_clk,
+	.rate = 48000000,
+};
+
+/* watch dog timer clock */
+static struct clk wdt_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &osc_24m_clk,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from pll1 clk */
+/* cpu clock */
+static struct clk cpu_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.recalc = &follow_parent,
+};
+
+/* ahb configuration structure */
+static struct bus_clk_config ahb_config = {
+	.reg = CORE_CLK_CFG,
+	.mask = PLL_HCLK_RATIO_MASK,
+	.shift = PLL_HCLK_RATIO_SHIFT,
+};
+
+/* ahb clock */
+static struct clk ahb_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.recalc = &bus_clk_recalc,
+	.private_data = &ahb_config,
+};
+
+/* uart configurations */
+static struct aux_clk_config uart_config = {
+	.synth_reg = UART_CLK_SYNT,
+};
+
+/* uart parents */
+static struct pclk_info uart_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* uart parent select structure */
+static struct pclk_sel uart_pclk_sel = {
+	.pclk_info = uart_pclk_info,
+	.pclk_count = ARRAY_SIZE(uart_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = UART_CLK_MASK,
+};
+
+/* uart clock */
+static struct clk uart_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = UART_CLK_ENB,
+	.pclk_sel = &uart_pclk_sel,
+	.pclk_sel_shift = UART_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &uart_config,
+};
+
+/* firda configurations */
+static struct aux_clk_config firda_config = {
+	.synth_reg = FIRDA_CLK_SYNT,
+};
+
+/* firda parents */
+static struct pclk_info firda_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* firda parent select structure */
+static struct pclk_sel firda_pclk_sel = {
+	.pclk_info = firda_pclk_info,
+	.pclk_count = ARRAY_SIZE(firda_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = FIRDA_CLK_MASK,
+};
+
+/* firda clock */
+static struct clk firda_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = FIRDA_CLK_ENB,
+	.pclk_sel = &firda_pclk_sel,
+	.pclk_sel_shift = FIRDA_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &firda_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt_pclk_sel = {
+	.pclk_info = gpt_pclk_info,
+	.pclk_count = ARRAY_SIZE(gpt_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = GPT_CLK_MASK,
+};
+
+/* gpt0 configurations */
+static struct aux_clk_config gpt0_config = {
+	.synth_reg = PRSC1_CLK_CFG,
+};
+
+/* gpt0 timer clock */
+static struct clk gpt0_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT0_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt0_config,
+};
+
+/* gpt1 configurations */
+static struct aux_clk_config gpt1_config = {
+	.synth_reg = PRSC2_CLK_CFG,
+};
+
+/* gpt1 timer clock */
+static struct clk gpt1_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPT1_CLK_ENB,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT1_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt1_config,
+};
+
+/* gpt2 configurations */
+static struct aux_clk_config gpt2_config = {
+	.synth_reg = PRSC3_CLK_CFG,
+};
+
+/* gpt2 timer clock */
+static struct clk gpt2_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPT2_CLK_ENB,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT2_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt2_config,
+};
+
+/* clock derived from pll3 clk */
+/* usbh clock */
+static struct clk usbh_clk = {
+	.pclk = &pll3_48m_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = USBH_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* usbd clock */
+static struct clk usbd_clk = {
+	.pclk = &pll3_48m_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = USBD_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clcd clock */
+static struct clk clcd_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll3_48m_clk,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from ahb clk */
+/* apb configuration structure */
+static struct bus_clk_config apb_config = {
+	.reg = CORE_CLK_CFG,
+	.mask = HCLK_PCLK_RATIO_MASK,
+	.shift = HCLK_PCLK_RATIO_SHIFT,
+};
+
+/* apb clock */
+static struct clk apb_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &ahb_clk,
+	.recalc = &bus_clk_recalc,
+	.private_data = &apb_config,
+};
+
+/* i2c clock */
+static struct clk i2c_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = I2C_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* dma clock */
+static struct clk dma_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = DMA_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* jpeg clock */
+static struct clk jpeg_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = JPEG_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* gmac clock */
+static struct clk gmac_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GMAC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* smi clock */
+static struct clk smi_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SMI_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* c3 clock */
+static struct clk c3_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = C3_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from apb clk */
+/* adc clock */
+static struct clk adc_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = ADC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* ssp clock */
+static struct clk ssp_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SSP_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* gpio clock */
+static struct clk gpio_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPIO_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* array of all spear 3xx clock lookups */
+static struct clk_lookup spear_clk_lookups[] = {
+	/* root clks */
+	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
+	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
+	/* clock derived from 32 KHz osc clk */
+	{ .dev_id = "rtc",		.clk = &rtc_clk},
+	/* clock derived from 24 MHz osc clk */
+	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
+	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
+	{ .dev_id = "wdt",		.clk = &wdt_clk},
+	/* clock derived from pll1 clk */
+	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
+	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
+	{ .dev_id = "uart",		.clk = &uart_clk},
+	{ .dev_id = "firda",		.clk = &firda_clk},
+	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
+	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
+	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
+	/* clock derived from pll3 clk */
+	{ .dev_id = "usbh",		.clk = &usbh_clk},
+	{ .dev_id = "usbd",		.clk = &usbd_clk},
+	{ .dev_id = "clcd",		.clk = &clcd_clk},
+	/* clock derived from ahb clk */
+	{ .con_id = "apb_clk",		.clk = &apb_clk},
+	{ .dev_id = "i2c",		.clk = &i2c_clk},
+	{ .dev_id = "dma",		.clk = &dma_clk},
+	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
+	{ .dev_id = "gmac",		.clk = &gmac_clk},
+	{ .dev_id = "smi",		.clk = &smi_clk},
+	{ .dev_id = "c3",		.clk = &c3_clk},
+	/* clock derived from apb clk */
+	{ .dev_id = "adc",		.clk = &adc_clk},
+	{ .dev_id = "ssp",		.clk = &ssp_clk},
+	{ .dev_id = "gpio",		.clk = &gpio_clk},
+};
+
+void __init clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+		clk_register(&spear_clk_lookups[i]);
+
+	recalc_root_clocks();
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/clkdev.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/clkdev.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/clkdev.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/clkdev.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+#include <plat/clkdev.h>
+
+#endif /* __MACH_CLKDEV_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/debug-macro.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header spear3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <plat/debug-macro.S>
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/entry-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/entry-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/entry-macro.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/entry-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/spear.h>
+#include <asm/hardware/vic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =VA_SPEAR3XX_ML1_VIC_BASE
+		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get status
+		teq	\irqstat, #0
+		beq	1001f				@ this will set/reset
+							@ zero register
+		/*
+		 * Following code will find bit position of least significang
+		 * bit set in irqstat, using following equation
+		 * least significant bit set in n = (n & ~(n-1))
+		 */
+		sub	\tmp, \irqstat, #1		@ tmp = irqstat - 1
+		mvn	\tmp, \tmp			@ tmp = ~tmp
+		and	\irqstat, \irqstat, \tmp	@ irqstat &= tmp
+		/* Now, irqstat is = bit no. of 1st bit set in vic irq status */
+		clz	\tmp, \irqstat			@ tmp = leading zeros
+		rsb	\irqnr, \tmp, #0x1F		@ irqnr = 32 - tmp - 1
+
+1001:		/* EQ will be set if no irqs pending */
+		.endm
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/generic.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/generic.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/generic.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/generic.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,205 @@
+/*
+ * arch/arm/mach-spear3xx/generic.h
+ *
+ * SPEAr3XX machine family generic header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <plat/padmux.h>
+
+/* spear3xx declarations */
+/*
+ * Each GPT has 2 timer channels
+ * Following GPT channels will be used as clock source and clockevent
+ */
+#define SPEAR_GPT0_BASE		SPEAR3XX_ML1_TMR_BASE
+#define SPEAR_GPT0_CHAN0_IRQ	IRQ_CPU_GPT1_1
+#define SPEAR_GPT0_CHAN1_IRQ	IRQ_CPU_GPT1_2
+
+/* Add spear3xx family device structure declarations here */
+extern struct amba_device gpio_device;
+extern struct amba_device uart_device;
+extern struct sys_timer spear_sys_timer;
+
+/* Add spear3xx family function declarations here */
+void __init clk_init(void);
+void __init spear3xx_map_io(void);
+void __init spear3xx_init_irq(void);
+void __init spear3xx_init(void);
+void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size);
+
+/* pad mux declarations */
+#define PMX_FIRDA_MASK		(1 << 14)
+#define PMX_I2C_MASK		(1 << 13)
+#define PMX_SSP_CS_MASK		(1 << 12)
+#define PMX_SSP_MASK		(1 << 11)
+#define PMX_MII_MASK		(1 << 10)
+#define PMX_GPIO_PIN0_MASK	(1 << 9)
+#define PMX_GPIO_PIN1_MASK	(1 << 8)
+#define PMX_GPIO_PIN2_MASK	(1 << 7)
+#define PMX_GPIO_PIN3_MASK	(1 << 6)
+#define PMX_GPIO_PIN4_MASK	(1 << 5)
+#define PMX_GPIO_PIN5_MASK	(1 << 4)
+#define PMX_UART0_MODEM_MASK	(1 << 3)
+#define PMX_UART0_MASK		(1 << 2)
+#define PMX_TIMER_3_4_MASK	(1 << 1)
+#define PMX_TIMER_1_2_MASK	(1 << 0)
+
+/* pad mux devices */
+extern struct pmx_dev pmx_firda;
+extern struct pmx_dev pmx_i2c;
+extern struct pmx_dev pmx_ssp_cs;
+extern struct pmx_dev pmx_ssp;
+extern struct pmx_dev pmx_mii;
+extern struct pmx_dev pmx_gpio_pin0;
+extern struct pmx_dev pmx_gpio_pin1;
+extern struct pmx_dev pmx_gpio_pin2;
+extern struct pmx_dev pmx_gpio_pin3;
+extern struct pmx_dev pmx_gpio_pin4;
+extern struct pmx_dev pmx_gpio_pin5;
+extern struct pmx_dev pmx_uart0_modem;
+extern struct pmx_dev pmx_uart0;
+extern struct pmx_dev pmx_timer_3_4;
+extern struct pmx_dev pmx_timer_1_2;
+
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* padmux plgpio devices */
+extern struct pmx_dev pmx_plgpio_0_1;
+extern struct pmx_dev pmx_plgpio_2_3;
+extern struct pmx_dev pmx_plgpio_4_5;
+extern struct pmx_dev pmx_plgpio_6_9;
+extern struct pmx_dev pmx_plgpio_10_27;
+extern struct pmx_dev pmx_plgpio_28;
+extern struct pmx_dev pmx_plgpio_29;
+extern struct pmx_dev pmx_plgpio_30;
+extern struct pmx_dev pmx_plgpio_31;
+extern struct pmx_dev pmx_plgpio_32;
+extern struct pmx_dev pmx_plgpio_33;
+extern struct pmx_dev pmx_plgpio_34_36;
+extern struct pmx_dev pmx_plgpio_37_42;
+extern struct pmx_dev pmx_plgpio_43_44_47_48;
+extern struct pmx_dev pmx_plgpio_45_46_49_50;
+#endif
+
+extern struct pmx_driver pmx_driver;
+
+/* spear300 declarations */
+#ifdef CONFIG_MACH_SPEAR300
+/* Add spear300 machine device structure declarations here */
+extern struct amba_device gpio1_device;
+
+/* pad mux modes */
+extern struct pmx_mode nand_mode;
+extern struct pmx_mode nor_mode;
+extern struct pmx_mode photo_frame_mode;
+extern struct pmx_mode lend_ip_phone_mode;
+extern struct pmx_mode hend_ip_phone_mode;
+extern struct pmx_mode lend_wifi_phone_mode;
+extern struct pmx_mode hend_wifi_phone_mode;
+extern struct pmx_mode ata_pabx_wi2s_mode;
+extern struct pmx_mode ata_pabx_i2s_mode;
+extern struct pmx_mode caml_lcdw_mode;
+extern struct pmx_mode camu_lcd_mode;
+extern struct pmx_mode camu_wlcd_mode;
+extern struct pmx_mode caml_lcd_mode;
+
+/* pad mux devices */
+extern struct pmx_dev pmx_fsmc_2_chips;
+extern struct pmx_dev pmx_fsmc_4_chips;
+extern struct pmx_dev pmx_keyboard;
+extern struct pmx_dev pmx_clcd;
+extern struct pmx_dev pmx_telecom_gpio;
+extern struct pmx_dev pmx_telecom_tdm;
+extern struct pmx_dev pmx_telecom_spi_cs_i2c_clk;
+extern struct pmx_dev pmx_telecom_camera;
+extern struct pmx_dev pmx_telecom_dac;
+extern struct pmx_dev pmx_telecom_i2s;
+extern struct pmx_dev pmx_telecom_boot_pins;
+extern struct pmx_dev pmx_telecom_sdio_4bit;
+extern struct pmx_dev pmx_telecom_sdio_8bit;
+extern struct pmx_dev pmx_gpio1;
+
+void spear300_pmx_init(void);
+
+/* Add spear300 machine function declarations here */
+void __init spear300_init(void);
+
+#endif /* CONFIG_MACH_SPEAR300 */
+
+/* spear310 declarations */
+#ifdef CONFIG_MACH_SPEAR310
+/* Add spear310 machine device structure declarations here */
+
+/* pad mux devices */
+extern struct pmx_dev pmx_emi_cs_0_1_4_5;
+extern struct pmx_dev pmx_emi_cs_2_3;
+extern struct pmx_dev pmx_uart1;
+extern struct pmx_dev pmx_uart2;
+extern struct pmx_dev pmx_uart3_4_5;
+extern struct pmx_dev pmx_fsmc;
+extern struct pmx_dev pmx_rs485_0_1;
+extern struct pmx_dev pmx_tdm0;
+
+void spear310_pmx_init(void);
+
+/* Add spear310 machine function declarations here */
+void __init spear310_init(void);
+
+#endif /* CONFIG_MACH_SPEAR310 */
+
+/* spear320 declarations */
+#ifdef CONFIG_MACH_SPEAR320
+/* Add spear320 machine device structure declarations here */
+
+/* pad mux modes */
+extern struct pmx_mode auto_net_smii_mode;
+extern struct pmx_mode auto_net_mii_mode;
+extern struct pmx_mode auto_exp_mode;
+extern struct pmx_mode small_printers_mode;
+
+/* pad mux devices */
+extern struct pmx_dev pmx_clcd;
+extern struct pmx_dev pmx_emi;
+extern struct pmx_dev pmx_fsmc;
+extern struct pmx_dev pmx_spp;
+extern struct pmx_dev pmx_sdio;
+extern struct pmx_dev pmx_i2s;
+extern struct pmx_dev pmx_uart1;
+extern struct pmx_dev pmx_uart1_modem;
+extern struct pmx_dev pmx_uart2;
+extern struct pmx_dev pmx_touchscreen;
+extern struct pmx_dev pmx_can;
+extern struct pmx_dev pmx_sdio_led;
+extern struct pmx_dev pmx_pwm0;
+extern struct pmx_dev pmx_pwm1;
+extern struct pmx_dev pmx_pwm2;
+extern struct pmx_dev pmx_pwm3;
+extern struct pmx_dev pmx_ssp1;
+extern struct pmx_dev pmx_ssp2;
+extern struct pmx_dev pmx_mii1;
+extern struct pmx_dev pmx_smii0;
+extern struct pmx_dev pmx_smii1;
+extern struct pmx_dev pmx_i2c1;
+
+void spear320_pmx_init(void);
+
+/* Add spear320 machine function declarations here */
+void __init spear320_init(void);
+
+#endif /* CONFIG_MACH_SPEAR320 */
+
+#endif /* __MACH_GENERIC_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include <plat/gpio.h>
+
+#endif /* __MACH_GPIO_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/hardware.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/hardware.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/hardware.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/hardware.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/hardware.h
+ *
+ * Hardware definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* Vitual to physical translation of statically mapped space */
+#define IO_ADDRESS(x)		(x | 0xF0000000)
+
+#endif /* __MACH_HARDWARE_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/io.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/io.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/io.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/io.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/io.h
+ *
+ * IO definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#include <plat/io.h>
+
+#endif /* __MACH_IO_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/irqs.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/irqs.h
+ *
+ * IRQ helper macros for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+/* SPEAr3xx IRQ definitions */
+#define IRQ_HW_ACCEL_MOD_0			0
+#define IRQ_INTRCOMM_RAS_ARM			1
+#define IRQ_CPU_GPT1_1				2
+#define IRQ_CPU_GPT1_2				3
+#define IRQ_BASIC_GPT1_1			4
+#define IRQ_BASIC_GPT1_2			5
+#define IRQ_BASIC_GPT2_1			6
+#define IRQ_BASIC_GPT2_2			7
+#define IRQ_BASIC_DMA				8
+#define IRQ_BASIC_SMI				9
+#define IRQ_BASIC_RTC				10
+#define IRQ_BASIC_GPIO				11
+#define IRQ_BASIC_WDT				12
+#define IRQ_DDR_CONTROLLER			13
+#define IRQ_SYS_ERROR				14
+#define IRQ_WAKEUP_RCV				15
+#define IRQ_JPEG				16
+#define IRQ_IRDA				17
+#define IRQ_ADC					18
+#define IRQ_UART				19
+#define IRQ_SSP					20
+#define IRQ_I2C					21
+#define IRQ_MAC_1				22
+#define IRQ_MAC_2				23
+#define IRQ_USB_DEV				24
+#define IRQ_USB_H_OHCI_0			25
+#define IRQ_USB_H_EHCI_0			26
+#define IRQ_USB_H_EHCI_1			IRQ_USB_H_EHCI_0
+#define IRQ_USB_H_OHCI_1			27
+#define IRQ_GEN_RAS_1				28
+#define IRQ_GEN_RAS_2				29
+#define IRQ_GEN_RAS_3				30
+#define IRQ_HW_ACCEL_MOD_1			31
+#define IRQ_VIC_END				32
+
+#define VIRQ_START				IRQ_VIC_END
+
+/* SPEAr300 Virtual irq definitions */
+#ifdef CONFIG_MACH_SPEAR300
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define VIRQ_IT_PERS_S				(VIRQ_START + 0)
+#define VIRQ_IT_CHANGE_S			(VIRQ_START + 1)
+#define VIRQ_I2S				(VIRQ_START + 2)
+#define VIRQ_TDM				(VIRQ_START + 3)
+#define VIRQ_CAMERA_L				(VIRQ_START + 4)
+#define VIRQ_CAMERA_F				(VIRQ_START + 5)
+#define VIRQ_CAMERA_V				(VIRQ_START + 6)
+#define VIRQ_KEYBOARD				(VIRQ_START + 7)
+#define VIRQ_GPIO1				(VIRQ_START + 8)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define IRQ_CLCD				IRQ_GEN_RAS_3
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define IRQ_SDIO				IRQ_INTRCOMM_RAS_ARM
+
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE			(VIRQ_START + 9)
+#define SPEAR_GPIO1_INT_BASE			(SPEAR_GPIO_INT_BASE + 8)
+#define SPEAR_GPIO_INT_END			(SPEAR_GPIO1_INT_BASE + 8)
+
+/* SPEAr310 Virtual irq definitions */
+#elif defined(CONFIG_MACH_SPEAR310)
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define VIRQ_SMII0				(VIRQ_START + 0)
+#define VIRQ_SMII1				(VIRQ_START + 1)
+#define VIRQ_SMII2				(VIRQ_START + 2)
+#define VIRQ_SMII3				(VIRQ_START + 3)
+#define VIRQ_WAKEUP_SMII0			(VIRQ_START + 4)
+#define VIRQ_WAKEUP_SMII1			(VIRQ_START + 5)
+#define VIRQ_WAKEUP_SMII2			(VIRQ_START + 6)
+#define VIRQ_WAKEUP_SMII3			(VIRQ_START + 7)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define VIRQ_UART1				(VIRQ_START + 8)
+#define VIRQ_UART2				(VIRQ_START + 9)
+#define VIRQ_UART3				(VIRQ_START + 10)
+#define VIRQ_UART4				(VIRQ_START + 11)
+#define VIRQ_UART5				(VIRQ_START + 12)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define VIRQ_EMI				(VIRQ_START + 13)
+#define VIRQ_PLGPIO				(VIRQ_START + 14)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define VIRQ_TDM_HDLC				(VIRQ_START + 15)
+#define VIRQ_RS485_0				(VIRQ_START + 16)
+#define VIRQ_RS485_1				(VIRQ_START + 17)
+
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE			(VIRQ_START + 18)
+
+/* SPEAr320 Virtual irq definitions */
+#else
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define VIRQ_EMI				(VIRQ_START + 0)
+#define VIRQ_CLCD				(VIRQ_START + 1)
+#define VIRQ_SPP				(VIRQ_START + 2)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define IRQ_SDIO				IRQ_GEN_RAS_2
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define VIRQ_PLGPIO				(VIRQ_START + 3)
+#define VIRQ_I2S_PLAY				(VIRQ_START + 4)
+#define VIRQ_I2S_REC				(VIRQ_START + 5)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define VIRQ_CANU				(VIRQ_START + 6)
+#define VIRQ_CANL				(VIRQ_START + 7)
+#define VIRQ_UART1				(VIRQ_START + 8)
+#define VIRQ_UART2				(VIRQ_START + 9)
+#define VIRQ_SSP1				(VIRQ_START + 10)
+#define VIRQ_SSP2				(VIRQ_START + 11)
+#define VIRQ_SMII0				(VIRQ_START + 12)
+#define VIRQ_MII1_SMII1				(VIRQ_START + 13)
+#define VIRQ_WAKEUP_SMII0			(VIRQ_START + 14)
+#define VIRQ_WAKEUP_MII1_SMII1			(VIRQ_START + 15)
+#define VIRQ_I2C				(VIRQ_START + 16)
+
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE			(VIRQ_START + 17)
+
+#endif
+
+/* PLGPIO Virtual IRQs */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+#define SPEAR_PLGPIO_INT_BASE			(SPEAR_GPIO_INT_BASE + 8)
+#define SPEAR_GPIO_INT_END			(SPEAR_PLGPIO_INT_BASE + 102)
+#endif
+
+#define VIRQ_END				SPEAR_GPIO_INT_END
+#define NR_IRQS					VIRQ_END
+
+#endif /* __MACH_IRQS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/memory.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/memory.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/memory.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/memory.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/memory.h
+ *
+ * Memory map for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#include <plat/memory.h>
+
+#endif /* __MACH_MEMORY_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/misc_regs.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/misc_regs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/misc_regs.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/misc_regs.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,163 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/misc_regs.h
+ *
+ * Miscellaneous registers definitions for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MISC_REGS_H
+#define __MACH_MISC_REGS_H
+
+#include <mach/spear.h>
+
+#define MISC_BASE		VA_SPEAR3XX_ICM3_MISC_REG_BASE
+
+#define SOC_CFG_CTR		((unsigned int *)(MISC_BASE + 0x000))
+#define DIAG_CFG_CTR		((unsigned int *)(MISC_BASE + 0x004))
+#define PLL1_CTR		((unsigned int *)(MISC_BASE + 0x008))
+#define PLL1_FRQ		((unsigned int *)(MISC_BASE + 0x00C))
+#define PLL1_MOD		((unsigned int *)(MISC_BASE + 0x010))
+#define PLL2_CTR		((unsigned int *)(MISC_BASE + 0x014))
+/* PLL_CTR register masks */
+#define PLL_ENABLE		2
+#define PLL_MODE_SHIFT		4
+#define PLL_MODE_MASK		0x3
+#define PLL_MODE_NORMAL		0
+#define PLL_MODE_FRACTION	1
+#define PLL_MODE_DITH_DSB	2
+#define PLL_MODE_DITH_SSB	3
+
+#define PLL2_FRQ		((unsigned int *)(MISC_BASE + 0x018))
+/* PLL FRQ register masks */
+#define PLL_DIV_N_SHIFT		0
+#define PLL_DIV_N_MASK		0xFF
+#define PLL_DIV_P_SHIFT		8
+#define PLL_DIV_P_MASK		0x7
+#define PLL_NORM_FDBK_M_SHIFT	24
+#define PLL_NORM_FDBK_M_MASK	0xFF
+#define PLL_DITH_FDBK_M_SHIFT	16
+#define PLL_DITH_FDBK_M_MASK	0xFFFF
+
+#define PLL2_MOD		((unsigned int *)(MISC_BASE + 0x01C))
+#define PLL_CLK_CFG		((unsigned int *)(MISC_BASE + 0x020))
+#define CORE_CLK_CFG		((unsigned int *)(MISC_BASE + 0x024))
+/* CORE CLK CFG register masks */
+#define PLL_HCLK_RATIO_SHIFT	10
+#define PLL_HCLK_RATIO_MASK	0x3
+#define HCLK_PCLK_RATIO_SHIFT	8
+#define HCLK_PCLK_RATIO_MASK	0x3
+
+#define PERIP_CLK_CFG		((unsigned int *)(MISC_BASE + 0x028))
+/* PERIP_CLK_CFG register masks */
+#define UART_CLK_SHIFT		4
+#define UART_CLK_MASK		0x1
+#define FIRDA_CLK_SHIFT		5
+#define FIRDA_CLK_MASK		0x3
+#define GPT0_CLK_SHIFT		8
+#define GPT1_CLK_SHIFT		11
+#define GPT2_CLK_SHIFT		12
+#define GPT_CLK_MASK		0x1
+#define AUX_CLK_PLL3_MASK	0
+#define AUX_CLK_PLL1_MASK	1
+
+#define PERIP1_CLK_ENB		((unsigned int *)(MISC_BASE + 0x02C))
+/* PERIP1_CLK_ENB register masks */
+#define UART_CLK_ENB		3
+#define SSP_CLK_ENB		5
+#define I2C_CLK_ENB		7
+#define JPEG_CLK_ENB		8
+#define FIRDA_CLK_ENB		10
+#define GPT1_CLK_ENB		11
+#define GPT2_CLK_ENB		12
+#define ADC_CLK_ENB		15
+#define RTC_CLK_ENB		17
+#define GPIO_CLK_ENB		18
+#define DMA_CLK_ENB		19
+#define SMI_CLK_ENB		21
+#define GMAC_CLK_ENB		23
+#define USBD_CLK_ENB		24
+#define USBH_CLK_ENB		25
+#define C3_CLK_ENB		31
+
+#define SOC_CORE_ID		((unsigned int *)(MISC_BASE + 0x030))
+#define RAS_CLK_ENB		((unsigned int *)(MISC_BASE + 0x034))
+#define PERIP1_SOF_RST		((unsigned int *)(MISC_BASE + 0x038))
+/* PERIP1_SOF_RST register masks */
+#define JPEG_SOF_RST		8
+
+#define SOC_USER_ID		((unsigned int *)(MISC_BASE + 0x03C))
+#define RAS_SOF_RST		((unsigned int *)(MISC_BASE + 0x040))
+#define PRSC1_CLK_CFG		((unsigned int *)(MISC_BASE + 0x044))
+#define PRSC2_CLK_CFG		((unsigned int *)(MISC_BASE + 0x048))
+#define PRSC3_CLK_CFG		((unsigned int *)(MISC_BASE + 0x04C))
+/* gpt synthesizer register masks */
+#define GPT_MSCALE_SHIFT	0
+#define GPT_MSCALE_MASK		0xFFF
+#define GPT_NSCALE_SHIFT	12
+#define GPT_NSCALE_MASK		0xF
+
+#define AMEM_CLK_CFG		((unsigned int *)(MISC_BASE + 0x050))
+#define EXPI_CLK_CFG		((unsigned int *)(MISC_BASE + 0x054))
+#define CLCD_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x05C))
+#define FIRDA_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x060))
+#define UART_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x064))
+#define GMAC_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x068))
+#define RAS1_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x06C))
+#define RAS2_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x070))
+#define RAS3_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x074))
+#define RAS4_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x078))
+/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_EQ_SEL_SHIFT	30
+#define AUX_EQ_SEL_MASK		1
+#define AUX_EQ1_SEL		0
+#define AUX_EQ2_SEL		1
+#define AUX_XSCALE_SHIFT	16
+#define AUX_XSCALE_MASK		0xFFF
+#define AUX_YSCALE_SHIFT	0
+#define AUX_YSCALE_MASK		0xFFF
+
+#define ICM1_ARB_CFG		((unsigned int *)(MISC_BASE + 0x07C))
+#define ICM2_ARB_CFG		((unsigned int *)(MISC_BASE + 0x080))
+#define ICM3_ARB_CFG		((unsigned int *)(MISC_BASE + 0x084))
+#define ICM4_ARB_CFG		((unsigned int *)(MISC_BASE + 0x088))
+#define ICM5_ARB_CFG		((unsigned int *)(MISC_BASE + 0x08C))
+#define ICM6_ARB_CFG		((unsigned int *)(MISC_BASE + 0x090))
+#define ICM7_ARB_CFG		((unsigned int *)(MISC_BASE + 0x094))
+#define ICM8_ARB_CFG		((unsigned int *)(MISC_BASE + 0x098))
+#define ICM9_ARB_CFG		((unsigned int *)(MISC_BASE + 0x09C))
+#define DMA_CHN_CFG		((unsigned int *)(MISC_BASE + 0x0A0))
+#define USB2_PHY_CFG		((unsigned int *)(MISC_BASE + 0x0A4))
+#define GMAC_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0A8))
+#define EXPI_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0AC))
+#define PRC1_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C0))
+#define PRC2_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C4))
+#define PRC3_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C8))
+#define PRC4_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0CC))
+#define PRC1_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D0))
+#define PRC2_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D4))
+#define PRC3_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D8))
+#define PRC4_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0DC))
+#define PWRDOWN_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0E0))
+#define COMPSSTL_1V8_CFG	((unsigned int *)(MISC_BASE + 0x0E4))
+#define COMPSSTL_2V5_CFG	((unsigned int *)(MISC_BASE + 0x0E8))
+#define COMPCOR_3V3_CFG		((unsigned int *)(MISC_BASE + 0x0EC))
+#define SSTLPAD_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F0))
+#define BIST1_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F4))
+#define BIST2_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F8))
+#define BIST3_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0FC))
+#define BIST4_CFG_CTR		((unsigned int *)(MISC_BASE + 0x100))
+#define BIST5_CFG_CTR		((unsigned int *)(MISC_BASE + 0x104))
+#define BIST1_STS_RES		((unsigned int *)(MISC_BASE + 0x108))
+#define BIST2_STS_RES		((unsigned int *)(MISC_BASE + 0x10C))
+#define BIST3_STS_RES		((unsigned int *)(MISC_BASE + 0x110))
+#define BIST4_STS_RES		((unsigned int *)(MISC_BASE + 0x114))
+#define BIST5_STS_RES		((unsigned int *)(MISC_BASE + 0x118))
+#define SYSERR_CFG_CTR		((unsigned int *)(MISC_BASE + 0x11C))
+
+#endif /* __MACH_MISC_REGS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/spear300.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/spear300.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/spear300.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/spear300.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/spear300.h
+ *
+ * SPEAr300 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifdef	CONFIG_MACH_SPEAR300
+
+#ifndef __MACH_SPEAR300_H
+#define __MACH_SPEAR300_H
+
+/* Base address of various IPs */
+#define SPEAR300_TELECOM_BASE		0x50000000
+#define SPEAR300_TELECOM_SIZE		0x10000000
+
+/* Interrupt registers offsets and masks */
+#define SPEAR300_TELECOM_REG_SIZE	0x00010000
+#define INT_ENB_MASK_REG		0x54
+#define INT_STS_MASK_REG		0x58
+#define IT_PERS_S_IRQ_MASK		(1 << 0)
+#define IT_CHANGE_S_IRQ_MASK		(1 << 1)
+#define I2S_IRQ_MASK			(1 << 2)
+#define TDM_IRQ_MASK			(1 << 3)
+#define CAMERA_L_IRQ_MASK		(1 << 4)
+#define CAMERA_F_IRQ_MASK		(1 << 5)
+#define CAMERA_V_IRQ_MASK		(1 << 6)
+#define KEYBOARD_IRQ_MASK		(1 << 7)
+#define GPIO1_IRQ_MASK			(1 << 8)
+
+#define SHIRQ_RAS1_MASK			0x1FF
+
+#define SPEAR300_CLCD_BASE		0x60000000
+#define SPEAR300_CLCD_SIZE		0x10000000
+
+#define SPEAR300_SDIO_BASE		0x70000000
+#define SPEAR300_SDIO_SIZE		0x10000000
+
+#define SPEAR300_NAND_0_BASE		0x80000000
+#define SPEAR300_NAND_0_SIZE		0x04000000
+
+#define SPEAR300_NAND_1_BASE		0x84000000
+#define SPEAR300_NAND_1_SIZE		0x04000000
+
+#define SPEAR300_NAND_2_BASE		0x88000000
+#define SPEAR300_NAND_2_SIZE		0x04000000
+
+#define SPEAR300_NAND_3_BASE		0x8c000000
+#define SPEAR300_NAND_3_SIZE		0x04000000
+
+#define SPEAR300_NOR_0_BASE		0x90000000
+#define SPEAR300_NOR_0_SIZE		0x01000000
+
+#define SPEAR300_NOR_1_BASE		0x91000000
+#define SPEAR300_NOR_1_SIZE		0x01000000
+
+#define SPEAR300_NOR_2_BASE		0x92000000
+#define SPEAR300_NOR_2_SIZE		0x01000000
+
+#define SPEAR300_NOR_3_BASE		0x93000000
+#define SPEAR300_NOR_3_SIZE		0x01000000
+
+#define SPEAR300_FSMC_BASE		0x94000000
+#define SPEAR300_FSMC_SIZE		0x05000000
+
+#define SPEAR300_SOC_CONFIG_BASE	0x99000000
+#define SPEAR300_SOC_CONFIG_SIZE	0x00000008
+
+#define SPEAR300_KEYBOARD_BASE		0xA0000000
+#define SPEAR300_KEYBOARD_SIZE		0x09000000
+
+#define SPEAR300_GPIO_BASE		0xA9000000
+#define SPEAR300_GPIO_SIZE		0x07000000
+
+#endif /* __MACH_SPEAR300_H */
+
+#endif /* CONFIG_MACH_SPEAR300 */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/spear310.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/spear310.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/spear310.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/spear310.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/spear310.h
+ *
+ * SPEAr310 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifdef	CONFIG_MACH_SPEAR310
+
+#ifndef __MACH_SPEAR310_H
+#define __MACH_SPEAR310_H
+
+#define SPEAR310_NAND_BASE		0x40000000
+#define SPEAR310_NAND_SIZE		0x04000000
+
+#define SPEAR310_FSMC_BASE		0x44000000
+#define SPEAR310_FSMC_SIZE		0x01000000
+
+#define SPEAR310_UART1_BASE		0xB2000000
+#define SPEAR310_UART2_BASE		0xB2080000
+#define SPEAR310_UART3_BASE		0xB2100000
+#define SPEAR310_UART4_BASE		0xB2180000
+#define SPEAR310_UART5_BASE		0xB2200000
+#define SPEAR310_UART_SIZE		0x00080000
+
+#define SPEAR310_HDLC_BASE		0xB2800000
+#define SPEAR310_HDLC_SIZE		0x00800000
+
+#define SPEAR310_RS485_0_BASE		0xB3000000
+#define SPEAR310_RS485_0_SIZE		0x00800000
+
+#define SPEAR310_RS485_1_BASE		0xB3800000
+#define SPEAR310_RS485_1_SIZE		0x00800000
+
+#define SPEAR310_SOC_CONFIG_BASE	0xB4000000
+#define SPEAR310_SOC_CONFIG_SIZE	0x00000070
+/* Interrupt registers offsets and masks */
+#define INT_STS_MASK_REG		0x04
+#define SMII0_IRQ_MASK			(1 << 0)
+#define SMII1_IRQ_MASK			(1 << 1)
+#define SMII2_IRQ_MASK			(1 << 2)
+#define SMII3_IRQ_MASK			(1 << 3)
+#define WAKEUP_SMII0_IRQ_MASK		(1 << 4)
+#define WAKEUP_SMII1_IRQ_MASK		(1 << 5)
+#define WAKEUP_SMII2_IRQ_MASK		(1 << 6)
+#define WAKEUP_SMII3_IRQ_MASK		(1 << 7)
+#define UART1_IRQ_MASK			(1 << 8)
+#define UART2_IRQ_MASK			(1 << 9)
+#define UART3_IRQ_MASK			(1 << 10)
+#define UART4_IRQ_MASK			(1 << 11)
+#define UART5_IRQ_MASK			(1 << 12)
+#define EMI_IRQ_MASK			(1 << 13)
+#define TDM_HDLC_IRQ_MASK		(1 << 14)
+#define RS485_0_IRQ_MASK		(1 << 15)
+#define RS485_1_IRQ_MASK		(1 << 16)
+
+#define SHIRQ_RAS1_MASK			0x000FF
+#define SHIRQ_RAS2_MASK			0x01F00
+#define SHIRQ_RAS3_MASK			0x02000
+#define SHIRQ_INTRCOMM_RAS_MASK		0x1C000
+
+#endif /* __MACH_SPEAR310_H */
+
+#endif /* CONFIG_MACH_SPEAR310 */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/spear320.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/spear320.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/spear320.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/spear320.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/spear320.h
+ *
+ * SPEAr320 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifdef	CONFIG_MACH_SPEAR320
+
+#ifndef __MACH_SPEAR320_H
+#define __MACH_SPEAR320_H
+
+#define SPEAR320_EMI_CTRL_BASE		0x40000000
+#define SPEAR320_EMI_CTRL_SIZE		0x08000000
+
+#define SPEAR320_FSMC_BASE		0x4C000000
+#define SPEAR320_FSMC_SIZE		0x01000000
+
+#define SPEAR320_I2S_BASE		0x60000000
+#define SPEAR320_I2S_SIZE		0x10000000
+
+#define SPEAR320_SDIO_BASE		0x70000000
+#define SPEAR320_SDIO_SIZE		0x10000000
+
+#define SPEAR320_CLCD_BASE		0x90000000
+#define SPEAR320_CLCD_SIZE		0x10000000
+
+#define SPEAR320_PAR_PORT_BASE		0xA0000000
+#define SPEAR320_PAR_PORT_SIZE		0x01000000
+
+#define SPEAR320_CAN0_BASE		0xA1000000
+#define SPEAR320_CAN0_SIZE		0x01000000
+
+#define SPEAR320_CAN1_BASE		0xA2000000
+#define SPEAR320_CAN1_SIZE		0x01000000
+
+#define SPEAR320_UART1_BASE		0xA3000000
+#define SPEAR320_UART2_BASE		0xA4000000
+#define SPEAR320_UART_SIZE		0x01000000
+
+#define SPEAR320_SSP0_BASE		0xA5000000
+#define SPEAR320_SSP0_SIZE		0x01000000
+
+#define SPEAR320_SSP1_BASE		0xA6000000
+#define SPEAR320_SSP1_SIZE		0x01000000
+
+#define SPEAR320_I2C_BASE		0xA7000000
+#define SPEAR320_I2C_SIZE		0x01000000
+
+#define SPEAR320_PWM_BASE		0xA8000000
+#define SPEAR320_PWM_SIZE		0x01000000
+
+#define SPEAR320_SMII0_BASE		0xAA000000
+#define SPEAR320_SMII0_SIZE		0x01000000
+
+#define SPEAR320_SMII1_BASE		0xAB000000
+#define SPEAR320_SMII1_SIZE		0x01000000
+
+#define SPEAR320_SOC_CONFIG_BASE	0xB4000000
+#define SPEAR320_SOC_CONFIG_SIZE	0x00000070
+/* Interrupt registers offsets and masks */
+#define INT_STS_MASK_REG		0x04
+#define INT_CLR_MASK_REG		0x04
+#define INT_ENB_MASK_REG		0x08
+#define GPIO_IRQ_MASK			(1 << 0)
+#define I2S_PLAY_IRQ_MASK		(1 << 1)
+#define I2S_REC_IRQ_MASK		(1 << 2)
+#define EMI_IRQ_MASK			(1 << 7)
+#define CLCD_IRQ_MASK			(1 << 8)
+#define SPP_IRQ_MASK			(1 << 9)
+#define SDIO_IRQ_MASK			(1 << 10)
+#define CAN_U_IRQ_MASK			(1 << 11)
+#define CAN_L_IRQ_MASK			(1 << 12)
+#define UART1_IRQ_MASK			(1 << 13)
+#define UART2_IRQ_MASK			(1 << 14)
+#define SSP1_IRQ_MASK			(1 << 15)
+#define SSP2_IRQ_MASK			(1 << 16)
+#define SMII0_IRQ_MASK			(1 << 17)
+#define MII1_SMII1_IRQ_MASK		(1 << 18)
+#define WAKEUP_SMII0_IRQ_MASK		(1 << 19)
+#define WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
+#define I2C1_IRQ_MASK			(1 << 21)
+
+#define SHIRQ_RAS1_MASK			0x000380
+#define SHIRQ_RAS3_MASK			0x000007
+#define SHIRQ_INTRCOMM_RAS_MASK		0x3FF800
+
+#endif /* __MACH_SPEAR320_H */
+
+#endif /* CONFIG_MACH_SPEAR320 */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/spear.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/spear.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/spear.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/spear.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,144 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/spear.h
+ *
+ * SPEAr3xx Machine family specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR3XX_H
+#define __MACH_SPEAR3XX_H
+
+#include <mach/hardware.h>
+#include <mach/spear300.h>
+#include <mach/spear310.h>
+#include <mach/spear320.h>
+
+#define SPEAR3XX_ML_SDRAM_BASE		0x00000000
+#define SPEAR3XX_ML_SDRAM_SIZE		0x40000000
+
+#define SPEAR3XX_ICM9_BASE		0xC0000000
+#define SPEAR3XX_ICM9_SIZE		0x10000000
+
+/* ICM1 - Low speed connection */
+#define SPEAR3XX_ICM1_2_BASE		0xD0000000
+#define SPEAR3XX_ICM1_2_SIZE		0x10000000
+
+#define SPEAR3XX_ICM1_UART_BASE		0xD0000000
+#define VA_SPEAR3XX_ICM1_UART_BASE	IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
+#define SPEAR3XX_ICM1_UART_SIZE		0x00080000
+
+#define SPEAR3XX_ICM1_ADC_BASE		0xD0080000
+#define SPEAR3XX_ICM1_ADC_SIZE		0x00080000
+
+#define SPEAR3XX_ICM1_SSP_BASE		0xD0100000
+#define SPEAR3XX_ICM1_SSP_SIZE		0x00080000
+
+#define SPEAR3XX_ICM1_I2C_BASE		0xD0180000
+#define SPEAR3XX_ICM1_I2C_SIZE		0x00080000
+
+#define SPEAR3XX_ICM1_JPEG_BASE		0xD0800000
+#define SPEAR3XX_ICM1_JPEG_SIZE		0x00800000
+
+#define SPEAR3XX_ICM1_IRDA_BASE		0xD1000000
+#define SPEAR3XX_ICM1_IRDA_SIZE		0x00080000
+
+#define SPEAR3XX_ICM1_SRAM_BASE		0xD2800000
+#define SPEAR3XX_ICM1_SRAM_SIZE		0x05800000
+
+/* ICM2 - Application Subsystem */
+#define SPEAR3XX_ICM2_HWACCEL0_BASE	0xD8800000
+#define SPEAR3XX_ICM2_HWACCEL0_SIZE	0x00800000
+
+#define SPEAR3XX_ICM2_HWACCEL1_BASE	0xD9000000
+#define SPEAR3XX_ICM2_HWACCEL1_SIZE	0x00800000
+
+/* ICM4 - High Speed Connection */
+#define SPEAR3XX_ICM4_BASE		0xE0000000
+#define SPEAR3XX_ICM4_SIZE		0x08000000
+
+#define SPEAR3XX_ICM4_MII_BASE		0xE0800000
+#define SPEAR3XX_ICM4_MII_SIZE		0x00800000
+
+#define SPEAR3XX_ICM4_USBD_FIFO_BASE	0xE1000000
+#define SPEAR3XX_ICM4_USBD_FIFO_SIZE	0x00100000
+
+#define SPEAR3XX_ICM4_USBD_CSR_BASE	0xE1100000
+#define SPEAR3XX_ICM4_USBD_CSR_SIZE	0x00100000
+
+#define SPEAR3XX_ICM4_USBD_PLDT_BASE	0xE1200000
+#define SPEAR3XX_ICM4_USBD_PLDT_SIZE	0x00100000
+
+#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE	0xE1800000
+#define SPEAR3XX_ICM4_USB_EHCI0_1_SIZE	0x00100000
+
+#define SPEAR3XX_ICM4_USB_OHCI0_BASE	0xE1900000
+#define SPEAR3XX_ICM4_USB_OHCI0_SIZE	0x00100000
+
+#define SPEAR3XX_ICM4_USB_OHCI1_BASE	0xE2100000
+#define SPEAR3XX_ICM4_USB_OHCI1_SIZE	0x00100000
+
+#define SPEAR3XX_ICM4_USB_ARB_BASE	0xE2800000
+#define SPEAR3XX_ICM4_USB_ARB_SIZE	0x00010000
+
+/* ML1 - Multi Layer CPU Subsystem */
+#define SPEAR3XX_ICM3_ML1_2_BASE	0xF0000000
+#define SPEAR3XX_ICM3_ML1_2_SIZE	0x0F000000
+
+#define SPEAR3XX_ML1_TMR_BASE		0xF0000000
+#define SPEAR3XX_ML1_TMR_SIZE		0x00100000
+
+#define SPEAR3XX_ML1_VIC_BASE		0xF1100000
+#define VA_SPEAR3XX_ML1_VIC_BASE	IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
+#define SPEAR3XX_ML1_VIC_SIZE		0x00100000
+
+/* ICM3 - Basic Subsystem */
+#define SPEAR3XX_ICM3_SMEM_BASE		0xF8000000
+#define SPEAR3XX_ICM3_SMEM_SIZE		0x04000000
+
+#define SPEAR3XX_ICM3_SMI_CTRL_BASE	0xFC000000
+#define SPEAR3XX_ICM3_SMI_CTRL_SIZE	0x00200000
+
+#define SPEAR3XX_ICM3_DMA_BASE		0xFC400000
+#define SPEAR3XX_ICM3_DMA_SIZE		0x00200000
+
+#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE	0xFC600000
+#define SPEAR3XX_ICM3_SDRAM_CTRL_SIZE	0x00200000
+
+#define SPEAR3XX_ICM3_TMR0_BASE		0xFC800000
+#define SPEAR3XX_ICM3_TMR0_SIZE		0x00080000
+
+#define SPEAR3XX_ICM3_WDT_BASE		0xFC880000
+#define SPEAR3XX_ICM3_WDT_SIZE		0x00080000
+
+#define SPEAR3XX_ICM3_RTC_BASE		0xFC900000
+#define SPEAR3XX_ICM3_RTC_SIZE		0x00080000
+
+#define SPEAR3XX_ICM3_GPIO_BASE		0xFC980000
+#define SPEAR3XX_ICM3_GPIO_SIZE		0x00080000
+
+#define SPEAR3XX_ICM3_SYS_CTRL_BASE	0xFCA00000
+#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
+#define SPEAR3XX_ICM3_SYS_CTRL_SIZE	0x00080000
+
+#define SPEAR3XX_ICM3_MISC_REG_BASE	0xFCA80000
+#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
+#define SPEAR3XX_ICM3_MISC_REG_SIZE	0x00080000
+
+#define SPEAR3XX_ICM3_TMR1_BASE		0xFCB00000
+#define SPEAR3XX_ICM3_TMR1_SIZE		0x00080000
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE		SPEAR3XX_ICM1_UART_BASE
+#define VA_SPEAR_DBG_UART_BASE		VA_SPEAR3XX_ICM1_UART_BASE
+
+/* Sysctl base for spear platform */
+#define SPEAR_SYS_CTRL_BASE		SPEAR3XX_ICM3_SYS_CTRL_BASE
+#define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR3XX_ICM3_SYS_CTRL_BASE
+
+#endif /* __MACH_SPEAR3XX_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/system.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/system.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/system.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/system.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/system.h
+ *
+ * SPEAr3xx Machine family specific architecture functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+#include <plat/system.h>
+
+#endif /* __MACH_SYSTEM_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/timex.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/timex.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/timex.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/timex.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/timex.h
+ *
+ * SPEAr3XX machine family specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#include <plat/timex.h>
+
+#endif /* __MACH_TIMEX_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/uncompress.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/uncompress.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/uncompress.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/uncompress.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <plat/uncompress.h>
+
+#endif /* __MACH_UNCOMPRESS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/vmalloc.h linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/vmalloc.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/include/mach/vmalloc.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/include/mach/vmalloc.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear3xx/include/mach/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr3xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_VMALLOC_H
+#define __MACH_VMALLOC_H
+
+#include <plat/vmalloc.h>
+
+#endif /* __MACH_VMALLOC_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/Kconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,33 @@
+#
+# SPEAr3XX Machine configuration file
+#
+
+if ARCH_SPEAR3XX
+
+choice
+	prompt "SPEAr3XX Family"
+	default MACH_SPEAR300
+
+config MACH_SPEAR300
+	bool "SPEAr300"
+	help
+	  Supports ST SPEAr300 Machine
+
+config MACH_SPEAR310
+	bool "SPEAr310"
+	help
+	  Supports ST SPEAr310 Machine
+
+config MACH_SPEAR320
+	bool "SPEAr320"
+	help
+	  Supports ST SPEAr320 Machine
+
+endchoice
+
+# Adding SPEAr3XX machine specific configuration files
+source "arch/arm/mach-spear3xx/Kconfig300"
+source "arch/arm/mach-spear3xx/Kconfig310"
+source "arch/arm/mach-spear3xx/Kconfig320"
+
+endif #ARCH_SPEAR3XX
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/Kconfig300 linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/Kconfig300
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/Kconfig300	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/Kconfig300	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,17 @@
+#
+# SPEAr300 machine configuration file
+#
+
+if MACH_SPEAR300
+
+choice
+	prompt "SPEAr300 Boards"
+	default BOARD_SPEAR300_EVB
+
+config BOARD_SPEAR300_EVB
+	bool "SPEAr300 Evaluation Board"
+	help
+	  Supports ST SPEAr300 Evaluation Board
+endchoice
+
+endif	#MACH_SPEAR300
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/Kconfig310 linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/Kconfig310
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/Kconfig310	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/Kconfig310	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,17 @@
+#
+# SPEAr310 machine configuration file
+#
+
+if MACH_SPEAR310
+
+choice
+	prompt "SPEAr310 Boards"
+	default BOARD_SPEAR310_EVB
+
+config BOARD_SPEAR310_EVB
+	bool "SPEAr310 Evaluation Board"
+	help
+	  Supports ST SPEAr310 Evaluation Board
+endchoice
+
+endif	#MACH_SPEAR310
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/Kconfig320 linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/Kconfig320
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/Kconfig320	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/Kconfig320	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,17 @@
+#
+# SPEAr320 machine configuration file
+#
+
+if MACH_SPEAR320
+
+choice
+	prompt "SPEAr320 Boards"
+	default BOARD_SPEAR320_EVB
+
+config BOARD_SPEAR320_EVB
+	bool "SPEAr320 Evaluation Board"
+	help
+	  Supports ST SPEAr320 Evaluation Board
+endchoice
+
+endif	#MACH_SPEAR320
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/Makefile	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,26 @@
+#
+# Makefile for SPEAr3XX machine series
+#
+
+# common files
+obj-y	+= spear3xx.o clock.o
+
+# spear300 specific files
+obj-$(CONFIG_MACH_SPEAR300) += spear300.o
+
+# spear300 boards files
+obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
+
+
+# spear310 specific files
+obj-$(CONFIG_MACH_SPEAR310) += spear310.o
+
+# spear310 boards files
+obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
+
+
+# spear320 specific files
+obj-$(CONFIG_MACH_SPEAR320) += spear320.o
+
+# spear320 boards files
+obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/Makefile.boot linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/Makefile.boot
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/Makefile.boot	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/Makefile.boot	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,3 @@
+zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear300.c linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear300.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear300.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear300.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,468 @@
+/*
+ * arch/arm/mach-spear3xx/spear300.c
+ *
+ * SPEAr300 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/amba/pl061.h>
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+#include <plat/shirq.h>
+
+/* pad multiplexing support */
+/* muxing registers */
+#define PAD_MUX_CONFIG_REG	0x00
+#define MODE_CONFIG_REG		0x04
+
+/* modes */
+#define NAND_MODE			(1 << 0)
+#define NOR_MODE			(1 << 1)
+#define PHOTO_FRAME_MODE		(1 << 2)
+#define LEND_IP_PHONE_MODE		(1 << 3)
+#define HEND_IP_PHONE_MODE		(1 << 4)
+#define LEND_WIFI_PHONE_MODE		(1 << 5)
+#define HEND_WIFI_PHONE_MODE		(1 << 6)
+#define ATA_PABX_WI2S_MODE		(1 << 7)
+#define ATA_PABX_I2S_MODE		(1 << 8)
+#define CAML_LCDW_MODE			(1 << 9)
+#define CAMU_LCD_MODE			(1 << 10)
+#define CAMU_WLCD_MODE			(1 << 11)
+#define CAML_LCD_MODE			(1 << 12)
+#define ALL_MODES			0x1FFF
+
+struct pmx_mode nand_mode = {
+	.id = NAND_MODE,
+	.name = "nand mode",
+	.mask = 0x00,
+};
+
+struct pmx_mode nor_mode = {
+	.id = NOR_MODE,
+	.name = "nor mode",
+	.mask = 0x01,
+};
+
+struct pmx_mode photo_frame_mode = {
+	.id = PHOTO_FRAME_MODE,
+	.name = "photo frame mode",
+	.mask = 0x02,
+};
+
+struct pmx_mode lend_ip_phone_mode = {
+	.id = LEND_IP_PHONE_MODE,
+	.name = "lend ip phone mode",
+	.mask = 0x03,
+};
+
+struct pmx_mode hend_ip_phone_mode = {
+	.id = HEND_IP_PHONE_MODE,
+	.name = "hend ip phone mode",
+	.mask = 0x04,
+};
+
+struct pmx_mode lend_wifi_phone_mode = {
+	.id = LEND_WIFI_PHONE_MODE,
+	.name = "lend wifi phone mode",
+	.mask = 0x05,
+};
+
+struct pmx_mode hend_wifi_phone_mode = {
+	.id = HEND_WIFI_PHONE_MODE,
+	.name = "hend wifi phone mode",
+	.mask = 0x06,
+};
+
+struct pmx_mode ata_pabx_wi2s_mode = {
+	.id = ATA_PABX_WI2S_MODE,
+	.name = "ata pabx wi2s mode",
+	.mask = 0x07,
+};
+
+struct pmx_mode ata_pabx_i2s_mode = {
+	.id = ATA_PABX_I2S_MODE,
+	.name = "ata pabx i2s mode",
+	.mask = 0x08,
+};
+
+struct pmx_mode caml_lcdw_mode = {
+	.id = CAML_LCDW_MODE,
+	.name = "caml lcdw mode",
+	.mask = 0x0C,
+};
+
+struct pmx_mode camu_lcd_mode = {
+	.id = CAMU_LCD_MODE,
+	.name = "camu lcd mode",
+	.mask = 0x0D,
+};
+
+struct pmx_mode camu_wlcd_mode = {
+	.id = CAMU_WLCD_MODE,
+	.name = "camu wlcd mode",
+	.mask = 0x0E,
+};
+
+struct pmx_mode caml_lcd_mode = {
+	.id = CAML_LCD_MODE,
+	.name = "caml lcd mode",
+	.mask = 0x0F,
+};
+
+/* devices */
+struct pmx_dev_mode pmx_fsmc_2_chips_modes[] = {
+	{
+		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
+			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
+		.mask = PMX_FIRDA_MASK,
+	},
+};
+
+struct pmx_dev pmx_fsmc_2_chips = {
+	.name = "fsmc_2_chips",
+	.modes = pmx_fsmc_2_chips_modes,
+	.mode_count = ARRAY_SIZE(pmx_fsmc_2_chips_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_fsmc_4_chips_modes[] = {
+	{
+		.ids = NAND_MODE | NOR_MODE | PHOTO_FRAME_MODE |
+			ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE,
+		.mask = PMX_FIRDA_MASK | PMX_UART0_MASK,
+	},
+};
+
+struct pmx_dev pmx_fsmc_4_chips = {
+	.name = "fsmc_4_chips",
+	.modes = pmx_fsmc_4_chips_modes,
+	.mode_count = ARRAY_SIZE(pmx_fsmc_4_chips_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_keyboard_modes[] = {
+	{
+		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
+			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
+			CAML_LCDW_MODE | CAMU_LCD_MODE | CAMU_WLCD_MODE |
+			CAML_LCD_MODE,
+		.mask = 0x0,
+	},
+};
+
+struct pmx_dev pmx_keyboard = {
+	.name = "keyboard",
+	.modes = pmx_keyboard_modes,
+	.mode_count = ARRAY_SIZE(pmx_keyboard_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_clcd_modes[] = {
+	{
+		.ids = PHOTO_FRAME_MODE,
+		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK ,
+	}, {
+		.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE |
+			CAMU_LCD_MODE | CAML_LCD_MODE,
+		.mask = PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_clcd = {
+	.name = "clcd",
+	.modes = pmx_clcd_modes,
+	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_gpio_modes[] = {
+	{
+		.ids = PHOTO_FRAME_MODE | CAMU_LCD_MODE | CAML_LCD_MODE,
+		.mask = PMX_MII_MASK,
+	}, {
+		.ids = LEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE,
+		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
+	}, {
+		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_WLCD_MODE,
+		.mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK,
+	}, {
+		.ids = HEND_IP_PHONE_MODE | HEND_WIFI_PHONE_MODE,
+		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK,
+	}, {
+		.ids = ATA_PABX_WI2S_MODE,
+		.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK
+			| PMX_UART0_MODEM_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_gpio = {
+	.name = "telecom_gpio",
+	.modes = pmx_telecom_gpio_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_gpio_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_tdm_modes[] = {
+	{
+		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
+			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE
+			| HEND_WIFI_PHONE_MODE | ATA_PABX_WI2S_MODE
+			| ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
+			| CAMU_WLCD_MODE | CAML_LCD_MODE,
+		.mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_tdm = {
+	.name = "telecom_tdm",
+	.modes = pmx_telecom_tdm_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_tdm_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_spi_cs_i2c_clk_modes[] = {
+	{
+		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE |
+			LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE
+			| ATA_PABX_WI2S_MODE | ATA_PABX_I2S_MODE |
+			CAML_LCDW_MODE | CAML_LCD_MODE,
+		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_spi_cs_i2c_clk = {
+	.name = "telecom_spi_cs_i2c_clk",
+	.modes = pmx_telecom_spi_cs_i2c_clk_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_spi_cs_i2c_clk_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_camera_modes[] = {
+	{
+		.ids = CAML_LCDW_MODE | CAML_LCD_MODE,
+		.mask = PMX_MII_MASK,
+	}, {
+		.ids = CAMU_LCD_MODE | CAMU_WLCD_MODE,
+		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_camera = {
+	.name = "telecom_camera",
+	.modes = pmx_telecom_camera_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_camera_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_dac_modes[] = {
+	{
+		.ids = ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
+			| CAMU_WLCD_MODE | CAML_LCD_MODE,
+		.mask = PMX_TIMER_1_2_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_dac = {
+	.name = "telecom_dac",
+	.modes = pmx_telecom_dac_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_dac_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_i2s_modes[] = {
+	{
+		.ids = LEND_IP_PHONE_MODE | HEND_IP_PHONE_MODE
+			| LEND_WIFI_PHONE_MODE | HEND_WIFI_PHONE_MODE |
+			ATA_PABX_I2S_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE
+			| CAMU_WLCD_MODE | CAML_LCD_MODE,
+		.mask = PMX_UART0_MODEM_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_i2s = {
+	.name = "telecom_i2s",
+	.modes = pmx_telecom_i2s_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_i2s_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_boot_pins_modes[] = {
+	{
+		.ids = NAND_MODE | NOR_MODE,
+		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
+			PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_boot_pins = {
+	.name = "telecom_boot_pins",
+	.modes = pmx_telecom_boot_pins_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_boot_pins_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
+	{
+		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
+			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
+			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
+			CAMU_WLCD_MODE | CAML_LCD_MODE | ATA_PABX_WI2S_MODE |
+			ATA_PABX_I2S_MODE,
+		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
+			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
+			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_sdio_4bit = {
+	.name = "telecom_sdio_4bit",
+	.modes = pmx_telecom_sdio_4bit_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_sdio_4bit_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
+	{
+		.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
+			HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
+			HEND_WIFI_PHONE_MODE | CAML_LCDW_MODE | CAMU_LCD_MODE |
+			CAMU_WLCD_MODE | CAML_LCD_MODE,
+		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
+			PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
+			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_telecom_sdio_8bit = {
+	.name = "telecom_sdio_8bit",
+	.modes = pmx_telecom_sdio_8bit_modes,
+	.mode_count = ARRAY_SIZE(pmx_telecom_sdio_8bit_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_gpio1_modes[] = {
+	{
+		.ids = PHOTO_FRAME_MODE,
+		.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
+			PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio1 = {
+	.name = "arm gpio1",
+	.modes = pmx_gpio1_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio1_modes),
+	.enb_on_reset = 1,
+};
+
+/* pmx driver structure */
+struct pmx_driver pmx_driver = {
+	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x0000000f},
+	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
+};
+
+/* Add spear300 specific devices here */
+/* arm gpio1 device registeration */
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= SPEAR_GPIO1_INT_BASE,
+};
+
+struct amba_device gpio1_device = {
+	.dev = {
+		.init_name = "gpio1",
+		.platform_data = &gpio1_plat_data,
+	},
+	.res = {
+		.start = SPEAR300_GPIO_BASE,
+		.end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {VIRQ_GPIO1, NO_IRQ},
+};
+
+/* spear3xx shared irq */
+struct shirq_dev_config shirq_ras1_config[] = {
+	{
+		.virq = VIRQ_IT_PERS_S,
+		.enb_mask = IT_PERS_S_IRQ_MASK,
+		.status_mask = IT_PERS_S_IRQ_MASK,
+	}, {
+		.virq = VIRQ_IT_CHANGE_S,
+		.enb_mask = IT_CHANGE_S_IRQ_MASK,
+		.status_mask = IT_CHANGE_S_IRQ_MASK,
+	}, {
+		.virq = VIRQ_I2S,
+		.enb_mask = I2S_IRQ_MASK,
+		.status_mask = I2S_IRQ_MASK,
+	}, {
+		.virq = VIRQ_TDM,
+		.enb_mask = TDM_IRQ_MASK,
+		.status_mask = TDM_IRQ_MASK,
+	}, {
+		.virq = VIRQ_CAMERA_L,
+		.enb_mask = CAMERA_L_IRQ_MASK,
+		.status_mask = CAMERA_L_IRQ_MASK,
+	}, {
+		.virq = VIRQ_CAMERA_F,
+		.enb_mask = CAMERA_F_IRQ_MASK,
+		.status_mask = CAMERA_F_IRQ_MASK,
+	}, {
+		.virq = VIRQ_CAMERA_V,
+		.enb_mask = CAMERA_V_IRQ_MASK,
+		.status_mask = CAMERA_V_IRQ_MASK,
+	}, {
+		.virq = VIRQ_KEYBOARD,
+		.enb_mask = KEYBOARD_IRQ_MASK,
+		.status_mask = KEYBOARD_IRQ_MASK,
+	}, {
+		.virq = VIRQ_GPIO1,
+		.enb_mask = GPIO1_IRQ_MASK,
+		.status_mask = GPIO1_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_ras1 = {
+	.irq = IRQ_GEN_RAS_1,
+	.dev_config = shirq_ras1_config,
+	.dev_count = ARRAY_SIZE(shirq_ras1_config),
+	.regs = {
+		.enb_reg = INT_ENB_MASK_REG,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_RAS1_MASK,
+		.clear_reg = -1,
+	},
+};
+
+/* spear300 routines */
+void __init spear300_init(void)
+{
+	int ret = 0;
+
+	/* call spear3xx family common init function */
+	spear3xx_init();
+
+	/* shared irq registeration */
+	shirq_ras1.regs.base =
+		ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
+	if (shirq_ras1.regs.base) {
+		ret = spear_shirq_register(&shirq_ras1);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ\n");
+	}
+}
+
+void spear300_pmx_init(void)
+{
+	spear_pmx_init(&pmx_driver, SPEAR300_SOC_CONFIG_BASE,
+			SPEAR300_SOC_CONFIG_SIZE);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear300_evb.c linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear300_evb.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear300_evb.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear300_evb.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-spear3xx/spear300_evb.c
+ *
+ * SPEAr300 evaluation board source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* padmux devices to enable */
+static struct pmx_dev *pmx_devs[] = {
+	/* spear3xx specific devices */
+	&pmx_i2c,
+	&pmx_ssp_cs,
+	&pmx_ssp,
+	&pmx_mii,
+	&pmx_uart0,
+
+	/* spear300 specific devices */
+	&pmx_fsmc_2_chips,
+	&pmx_clcd,
+	&pmx_telecom_sdio_4bit,
+	&pmx_gpio1,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	/* spear3xx specific devices */
+	&gpio_device,
+	&uart_device,
+
+	/* spear300 specific devices */
+	&gpio1_device,
+};
+
+static struct platform_device *plat_devs[] __initdata = {
+	/* spear3xx specific devices */
+
+	/* spear300 specific devices */
+};
+
+static void __init spear300_evb_init(void)
+{
+	unsigned int i;
+
+	/* call spear300 machine init function */
+	spear300_init();
+
+	/* padmux initialization */
+	pmx_driver.mode = &photo_frame_mode;
+	pmx_driver.devs = pmx_devs;
+	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
+	spear300_pmx_init();
+
+	/* Add Platform Devices */
+	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
+
+	/* Add Amba Devices */
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+}
+
+MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
+	.boot_params	=	0x00000100,
+	.map_io		=	spear3xx_map_io,
+	.init_irq	=	spear3xx_init_irq,
+	.timer		=	&spear_sys_timer,
+	.init_machine	=	spear300_evb_init,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear310.c linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear310.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear310.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear310.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,302 @@
+/*
+ * arch/arm/mach-spear3xx/spear310.c
+ *
+ * SPEAr310 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+#include <plat/shirq.h>
+
+/* pad multiplexing support */
+/* muxing registers */
+#define PAD_MUX_CONFIG_REG	0x08
+
+/* devices */
+struct pmx_dev_mode pmx_emi_cs_0_1_4_5_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_emi_cs_0_1_4_5 = {
+	.name = "emi_cs_0_1_4_5",
+	.modes = pmx_emi_cs_0_1_4_5_modes,
+	.mode_count = ARRAY_SIZE(pmx_emi_cs_0_1_4_5_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_emi_cs_2_3_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_TIMER_1_2_MASK,
+	},
+};
+
+struct pmx_dev pmx_emi_cs_2_3 = {
+	.name = "emi_cs_2_3",
+	.modes = pmx_emi_cs_2_3_modes,
+	.mode_count = ARRAY_SIZE(pmx_emi_cs_2_3_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_uart1_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_FIRDA_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart1 = {
+	.name = "uart1",
+	.modes = pmx_uart1_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_uart2_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_TIMER_1_2_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart2 = {
+	.name = "uart2",
+	.modes = pmx_uart2_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart2_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_uart3_4_5_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_UART0_MODEM_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart3_4_5 = {
+	.name = "uart3_4_5",
+	.modes = pmx_uart3_4_5_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart3_4_5_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_fsmc_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_fsmc = {
+	.name = "fsmc",
+	.modes = pmx_fsmc_modes,
+	.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_rs485_0_1_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_rs485_0_1 = {
+	.name = "rs485_0_1",
+	.modes = pmx_rs485_0_1_modes,
+	.mode_count = ARRAY_SIZE(pmx_rs485_0_1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_tdm0_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_tdm0 = {
+	.name = "tdm0",
+	.modes = pmx_tdm0_modes,
+	.mode_count = ARRAY_SIZE(pmx_tdm0_modes),
+	.enb_on_reset = 1,
+};
+
+/* pmx driver structure */
+struct pmx_driver pmx_driver = {
+	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
+};
+
+/* Add spear310 specific devices here */
+
+/* spear3xx shared irq */
+struct shirq_dev_config shirq_ras1_config[] = {
+	{
+		.virq = VIRQ_SMII0,
+		.status_mask = SMII0_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SMII1,
+		.status_mask = SMII1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SMII2,
+		.status_mask = SMII2_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SMII3,
+		.status_mask = SMII3_IRQ_MASK,
+	}, {
+		.virq = VIRQ_WAKEUP_SMII0,
+		.status_mask = WAKEUP_SMII0_IRQ_MASK,
+	}, {
+		.virq = VIRQ_WAKEUP_SMII1,
+		.status_mask = WAKEUP_SMII1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_WAKEUP_SMII2,
+		.status_mask = WAKEUP_SMII2_IRQ_MASK,
+	}, {
+		.virq = VIRQ_WAKEUP_SMII3,
+		.status_mask = WAKEUP_SMII3_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_ras1 = {
+	.irq = IRQ_GEN_RAS_1,
+	.dev_config = shirq_ras1_config,
+	.dev_count = ARRAY_SIZE(shirq_ras1_config),
+	.regs = {
+		.enb_reg = -1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_RAS1_MASK,
+		.clear_reg = -1,
+	},
+};
+
+struct shirq_dev_config shirq_ras2_config[] = {
+	{
+		.virq = VIRQ_UART1,
+		.status_mask = UART1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_UART2,
+		.status_mask = UART2_IRQ_MASK,
+	}, {
+		.virq = VIRQ_UART3,
+		.status_mask = UART3_IRQ_MASK,
+	}, {
+		.virq = VIRQ_UART4,
+		.status_mask = UART4_IRQ_MASK,
+	}, {
+		.virq = VIRQ_UART5,
+		.status_mask = UART5_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_ras2 = {
+	.irq = IRQ_GEN_RAS_2,
+	.dev_config = shirq_ras2_config,
+	.dev_count = ARRAY_SIZE(shirq_ras2_config),
+	.regs = {
+		.enb_reg = -1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_RAS2_MASK,
+		.clear_reg = -1,
+	},
+};
+
+struct shirq_dev_config shirq_ras3_config[] = {
+	{
+		.virq = VIRQ_EMI,
+		.status_mask = EMI_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_ras3 = {
+	.irq = IRQ_GEN_RAS_3,
+	.dev_config = shirq_ras3_config,
+	.dev_count = ARRAY_SIZE(shirq_ras3_config),
+	.regs = {
+		.enb_reg = -1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_RAS3_MASK,
+		.clear_reg = -1,
+	},
+};
+
+struct shirq_dev_config shirq_intrcomm_ras_config[] = {
+	{
+		.virq = VIRQ_TDM_HDLC,
+		.status_mask = TDM_HDLC_IRQ_MASK,
+	}, {
+		.virq = VIRQ_RS485_0,
+		.status_mask = RS485_0_IRQ_MASK,
+	}, {
+		.virq = VIRQ_RS485_1,
+		.status_mask = RS485_1_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_intrcomm_ras = {
+	.irq = IRQ_INTRCOMM_RAS_ARM,
+	.dev_config = shirq_intrcomm_ras_config,
+	.dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config),
+	.regs = {
+		.enb_reg = -1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK,
+		.clear_reg = -1,
+	},
+};
+
+/* spear310 routines */
+void __init spear310_init(void)
+{
+	void __iomem *base;
+	int ret = 0;
+
+	/* call spear3xx family common init function */
+	spear3xx_init();
+
+	/* shared irq registeration */
+	base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
+	if (base) {
+		/* shirq 1 */
+		shirq_ras1.regs.base = base;
+		ret = spear_shirq_register(&shirq_ras1);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 1\n");
+
+		/* shirq 2 */
+		shirq_ras2.regs.base = base;
+		ret = spear_shirq_register(&shirq_ras2);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 2\n");
+
+		/* shirq 3 */
+		shirq_ras3.regs.base = base;
+		ret = spear_shirq_register(&shirq_ras3);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 3\n");
+
+		/* shirq 4 */
+		shirq_intrcomm_ras.regs.base = base;
+		ret = spear_shirq_register(&shirq_intrcomm_ras);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 4\n");
+	}
+}
+
+void spear310_pmx_init(void)
+{
+	spear_pmx_init(&pmx_driver, SPEAR310_SOC_CONFIG_BASE,
+			SPEAR310_SOC_CONFIG_SIZE);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear310_evb.c linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear310_evb.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear310_evb.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear310_evb.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/mach-spear3xx/spear310_evb.c
+ *
+ * SPEAr310 evaluation board source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* padmux devices to enable */
+static struct pmx_dev *pmx_devs[] = {
+	/* spear3xx specific devices */
+	&pmx_i2c,
+	&pmx_ssp,
+	&pmx_gpio_pin0,
+	&pmx_gpio_pin1,
+	&pmx_gpio_pin2,
+	&pmx_gpio_pin3,
+	&pmx_gpio_pin4,
+	&pmx_gpio_pin5,
+	&pmx_uart0,
+
+	/* spear310 specific devices */
+	&pmx_emi_cs_0_1_4_5,
+	&pmx_emi_cs_2_3,
+	&pmx_uart1,
+	&pmx_uart2,
+	&pmx_uart3_4_5,
+	&pmx_fsmc,
+	&pmx_rs485_0_1,
+	&pmx_tdm0,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	/* spear3xx specific devices */
+	&gpio_device,
+	&uart_device,
+
+	/* spear310 specific devices */
+};
+
+static struct platform_device *plat_devs[] __initdata = {
+	/* spear3xx specific devices */
+
+	/* spear310 specific devices */
+};
+
+static void __init spear310_evb_init(void)
+{
+	unsigned int i;
+
+	/* call spear310 machine init function */
+	spear310_init();
+
+	/* padmux initialization */
+	pmx_driver.mode = NULL;
+	pmx_driver.devs = pmx_devs;
+	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
+	spear310_pmx_init();
+
+	/* Add Platform Devices */
+	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
+
+	/* Add Amba Devices */
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+}
+
+MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
+	.boot_params	=	0x00000100,
+	.map_io		=	spear3xx_map_io,
+	.init_irq	=	spear3xx_init_irq,
+	.timer		=	&spear_sys_timer,
+	.init_machine	=	spear310_evb_init,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear320.c linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear320.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear320.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear320.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,549 @@
+/*
+ * arch/arm/mach-spear3xx/spear320.c
+ *
+ * SPEAr320 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+#include <plat/shirq.h>
+
+/* pad multiplexing support */
+/* muxing registers */
+#define PAD_MUX_CONFIG_REG	0x0C
+#define MODE_CONFIG_REG		0x10
+
+/* modes */
+#define AUTO_NET_SMII_MODE	(1 << 0)
+#define AUTO_NET_MII_MODE	(1 << 1)
+#define AUTO_EXP_MODE		(1 << 2)
+#define SMALL_PRINTERS_MODE	(1 << 3)
+#define ALL_MODES		0xF
+
+struct pmx_mode auto_net_smii_mode = {
+	.id = AUTO_NET_SMII_MODE,
+	.name = "Automation Networking SMII Mode",
+	.mask = 0x00,
+};
+
+struct pmx_mode auto_net_mii_mode = {
+	.id = AUTO_NET_MII_MODE,
+	.name = "Automation Networking MII Mode",
+	.mask = 0x01,
+};
+
+struct pmx_mode auto_exp_mode = {
+	.id = AUTO_EXP_MODE,
+	.name = "Automation Expanded Mode",
+	.mask = 0x02,
+};
+
+struct pmx_mode small_printers_mode = {
+	.id = SMALL_PRINTERS_MODE,
+	.name = "Small Printers Mode",
+	.mask = 0x03,
+};
+
+/* devices */
+struct pmx_dev_mode pmx_clcd_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE,
+		.mask = 0x0,
+	},
+};
+
+struct pmx_dev pmx_clcd = {
+	.name = "clcd",
+	.modes = pmx_clcd_modes,
+	.mode_count = ARRAY_SIZE(pmx_clcd_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_emi_modes[] = {
+	{
+		.ids = AUTO_EXP_MODE,
+		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_emi = {
+	.name = "emi",
+	.modes = pmx_emi_modes,
+	.mode_count = ARRAY_SIZE(pmx_emi_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_fsmc_modes[] = {
+	{
+		.ids = ALL_MODES,
+		.mask = 0x0,
+	},
+};
+
+struct pmx_dev pmx_fsmc = {
+	.name = "fsmc",
+	.modes = pmx_fsmc_modes,
+	.mode_count = ARRAY_SIZE(pmx_fsmc_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_spp_modes[] = {
+	{
+		.ids = SMALL_PRINTERS_MODE,
+		.mask = 0x0,
+	},
+};
+
+struct pmx_dev pmx_spp = {
+	.name = "spp",
+	.modes = pmx_spp_modes,
+	.mode_count = ARRAY_SIZE(pmx_spp_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_sdio_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
+			SMALL_PRINTERS_MODE,
+		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_sdio = {
+	.name = "sdio",
+	.modes = pmx_sdio_modes,
+	.mode_count = ARRAY_SIZE(pmx_sdio_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_i2s_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+		.mask = PMX_UART0_MODEM_MASK,
+	},
+};
+
+struct pmx_dev pmx_i2s = {
+	.name = "i2s",
+	.modes = pmx_i2s_modes,
+	.mode_count = ARRAY_SIZE(pmx_i2s_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_uart1_modes[] = {
+	{
+		.ids = ALL_MODES,
+		.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart1 = {
+	.name = "uart1",
+	.modes = pmx_uart1_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_uart1_modem_modes[] = {
+	{
+		.ids = AUTO_EXP_MODE,
+		.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK |
+			PMX_SSP_CS_MASK,
+	}, {
+		.ids = SMALL_PRINTERS_MODE,
+		.mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK |
+			PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart1_modem = {
+	.name = "uart1_modem",
+	.modes = pmx_uart1_modem_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart1_modem_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_uart2_modes[] = {
+	{
+		.ids = ALL_MODES,
+		.mask = PMX_FIRDA_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart2 = {
+	.name = "uart2",
+	.modes = pmx_uart2_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart2_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_touchscreen_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE,
+		.mask = PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_touchscreen = {
+	.name = "touchscreen",
+	.modes = pmx_touchscreen_modes,
+	.mode_count = ARRAY_SIZE(pmx_touchscreen_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_can_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE | AUTO_EXP_MODE,
+		.mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
+			PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
+	},
+};
+
+struct pmx_dev pmx_can = {
+	.name = "can",
+	.modes = pmx_can_modes,
+	.mode_count = ARRAY_SIZE(pmx_can_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_sdio_led_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+		.mask = PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_sdio_led = {
+	.name = "sdio_led",
+	.modes = pmx_sdio_led_modes,
+	.mode_count = ARRAY_SIZE(pmx_sdio_led_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_pwm0_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+		.mask = PMX_UART0_MODEM_MASK,
+	}, {
+		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_pwm0 = {
+	.name = "pwm0",
+	.modes = pmx_pwm0_modes,
+	.mode_count = ARRAY_SIZE(pmx_pwm0_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_pwm1_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+		.mask = PMX_UART0_MODEM_MASK,
+	}, {
+		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_pwm1 = {
+	.name = "pwm1",
+	.modes = pmx_pwm1_modes,
+	.mode_count = ARRAY_SIZE(pmx_pwm1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_pwm2_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
+		.mask = PMX_SSP_CS_MASK,
+	}, {
+		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_pwm2 = {
+	.name = "pwm2",
+	.modes = pmx_pwm2_modes,
+	.mode_count = ARRAY_SIZE(pmx_pwm2_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_pwm3_modes[] = {
+	{
+		.ids = AUTO_EXP_MODE | SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_pwm3 = {
+	.name = "pwm3",
+	.modes = pmx_pwm3_modes,
+	.mode_count = ARRAY_SIZE(pmx_pwm3_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_ssp1_modes[] = {
+	{
+		.ids = SMALL_PRINTERS_MODE | AUTO_NET_SMII_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_ssp1 = {
+	.name = "ssp1",
+	.modes = pmx_ssp1_modes,
+	.mode_count = ARRAY_SIZE(pmx_ssp1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_ssp2_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_ssp2 = {
+	.name = "ssp2",
+	.modes = pmx_ssp2_modes,
+	.mode_count = ARRAY_SIZE(pmx_ssp2_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_mii1_modes[] = {
+	{
+		.ids = AUTO_NET_MII_MODE,
+		.mask = 0x0,
+	},
+};
+
+struct pmx_dev pmx_mii1 = {
+	.name = "mii1",
+	.modes = pmx_mii1_modes,
+	.mode_count = ARRAY_SIZE(pmx_mii1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_smii0_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | AUTO_EXP_MODE | SMALL_PRINTERS_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_smii0 = {
+	.name = "smii0",
+	.modes = pmx_smii0_modes,
+	.mode_count = ARRAY_SIZE(pmx_smii0_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_smii1_modes[] = {
+	{
+		.ids = AUTO_NET_SMII_MODE | SMALL_PRINTERS_MODE,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_smii1 = {
+	.name = "smii1",
+	.modes = pmx_smii1_modes,
+	.mode_count = ARRAY_SIZE(pmx_smii1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_i2c1_modes[] = {
+	{
+		.ids = AUTO_EXP_MODE,
+		.mask = 0x0,
+	},
+};
+
+struct pmx_dev pmx_i2c1 = {
+	.name = "i2c1",
+	.modes = pmx_i2c1_modes,
+	.mode_count = ARRAY_SIZE(pmx_i2c1_modes),
+	.enb_on_reset = 1,
+};
+
+/* pmx driver structure */
+struct pmx_driver pmx_driver = {
+	.mode_reg = {.offset = MODE_CONFIG_REG, .mask = 0x00000007},
+	.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
+};
+
+/* Add spear320 specific devices here */
+
+/* spear3xx shared irq */
+struct shirq_dev_config shirq_ras1_config[] = {
+	{
+		.virq = VIRQ_EMI,
+		.status_mask = EMI_IRQ_MASK,
+		.clear_mask = EMI_IRQ_MASK,
+	}, {
+		.virq = VIRQ_CLCD,
+		.status_mask = CLCD_IRQ_MASK,
+		.clear_mask = CLCD_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SPP,
+		.status_mask = SPP_IRQ_MASK,
+		.clear_mask = SPP_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_ras1 = {
+	.irq = IRQ_GEN_RAS_1,
+	.dev_config = shirq_ras1_config,
+	.dev_count = ARRAY_SIZE(shirq_ras1_config),
+	.regs = {
+		.enb_reg = -1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_RAS1_MASK,
+		.clear_reg = INT_CLR_MASK_REG,
+		.reset_to_clear = 1,
+	},
+};
+
+struct shirq_dev_config shirq_ras3_config[] = {
+	{
+		.virq = VIRQ_PLGPIO,
+		.enb_mask = GPIO_IRQ_MASK,
+		.status_mask = GPIO_IRQ_MASK,
+		.clear_mask = GPIO_IRQ_MASK,
+	}, {
+		.virq = VIRQ_I2S_PLAY,
+		.enb_mask = I2S_PLAY_IRQ_MASK,
+		.status_mask = I2S_PLAY_IRQ_MASK,
+		.clear_mask = I2S_PLAY_IRQ_MASK,
+	}, {
+		.virq = VIRQ_I2S_REC,
+		.enb_mask = I2S_REC_IRQ_MASK,
+		.status_mask = I2S_REC_IRQ_MASK,
+		.clear_mask = I2S_REC_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_ras3 = {
+	.irq = IRQ_GEN_RAS_3,
+	.dev_config = shirq_ras3_config,
+	.dev_count = ARRAY_SIZE(shirq_ras3_config),
+	.regs = {
+		.enb_reg = INT_ENB_MASK_REG,
+		.reset_to_enb = 1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_RAS3_MASK,
+		.clear_reg = INT_CLR_MASK_REG,
+		.reset_to_clear = 1,
+	},
+};
+
+struct shirq_dev_config shirq_intrcomm_ras_config[] = {
+	{
+		.virq = VIRQ_CANU,
+		.status_mask = CAN_U_IRQ_MASK,
+		.clear_mask = CAN_U_IRQ_MASK,
+	}, {
+		.virq = VIRQ_CANL,
+		.status_mask = CAN_L_IRQ_MASK,
+		.clear_mask = CAN_L_IRQ_MASK,
+	}, {
+		.virq = VIRQ_UART1,
+		.status_mask = UART1_IRQ_MASK,
+		.clear_mask = UART1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_UART2,
+		.status_mask = UART2_IRQ_MASK,
+		.clear_mask = UART2_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SSP1,
+		.status_mask = SSP1_IRQ_MASK,
+		.clear_mask = SSP1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SSP2,
+		.status_mask = SSP2_IRQ_MASK,
+		.clear_mask = SSP2_IRQ_MASK,
+	}, {
+		.virq = VIRQ_SMII0,
+		.status_mask = SMII0_IRQ_MASK,
+		.clear_mask = SMII0_IRQ_MASK,
+	}, {
+		.virq = VIRQ_MII1_SMII1,
+		.status_mask = MII1_SMII1_IRQ_MASK,
+		.clear_mask = MII1_SMII1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_WAKEUP_SMII0,
+		.status_mask = WAKEUP_SMII0_IRQ_MASK,
+		.clear_mask = WAKEUP_SMII0_IRQ_MASK,
+	}, {
+		.virq = VIRQ_WAKEUP_MII1_SMII1,
+		.status_mask = WAKEUP_MII1_SMII1_IRQ_MASK,
+		.clear_mask = WAKEUP_MII1_SMII1_IRQ_MASK,
+	}, {
+		.virq = VIRQ_I2C,
+		.status_mask = I2C1_IRQ_MASK,
+		.clear_mask = I2C1_IRQ_MASK,
+	},
+};
+
+struct spear_shirq shirq_intrcomm_ras = {
+	.irq = IRQ_INTRCOMM_RAS_ARM,
+	.dev_config = shirq_intrcomm_ras_config,
+	.dev_count = ARRAY_SIZE(shirq_intrcomm_ras_config),
+	.regs = {
+		.enb_reg = -1,
+		.status_reg = INT_STS_MASK_REG,
+		.status_reg_mask = SHIRQ_INTRCOMM_RAS_MASK,
+		.clear_reg = INT_CLR_MASK_REG,
+		.reset_to_clear = 1,
+	},
+};
+
+/* spear320 routines */
+void __init spear320_init(void)
+{
+	void __iomem *base;
+	int ret = 0;
+
+	/* call spear3xx family common init function */
+	spear3xx_init();
+
+	/* shared irq registeration */
+	base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
+	if (base) {
+		/* shirq 1 */
+		shirq_ras1.regs.base = base;
+		ret = spear_shirq_register(&shirq_ras1);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 1\n");
+
+		/* shirq 3 */
+		shirq_ras3.regs.base = base;
+		ret = spear_shirq_register(&shirq_ras3);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 3\n");
+
+		/* shirq 4 */
+		shirq_intrcomm_ras.regs.base = base;
+		ret = spear_shirq_register(&shirq_intrcomm_ras);
+		if (ret)
+			printk(KERN_ERR "Error registering Shared IRQ 4\n");
+	}
+}
+
+void spear320_pmx_init(void)
+{
+	spear_pmx_init(&pmx_driver, SPEAR320_SOC_CONFIG_BASE,
+			SPEAR320_SOC_CONFIG_SIZE);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear320_evb.c linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear320_evb.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear320_evb.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear320_evb.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-spear3xx/spear320_evb.c
+ *
+ * SPEAr320 evaluation board source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* padmux devices to enable */
+static struct pmx_dev *pmx_devs[] = {
+	/* spear3xx specific devices */
+	&pmx_i2c,
+	&pmx_ssp,
+	&pmx_mii,
+	&pmx_uart0,
+
+	/* spear320 specific devices */
+	&pmx_fsmc,
+	&pmx_sdio,
+	&pmx_i2s,
+	&pmx_uart1,
+	&pmx_uart2,
+	&pmx_can,
+	&pmx_pwm0,
+	&pmx_pwm1,
+	&pmx_pwm2,
+	&pmx_mii1,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	/* spear3xx specific devices */
+	&gpio_device,
+	&uart_device,
+
+	/* spear320 specific devices */
+};
+
+static struct platform_device *plat_devs[] __initdata = {
+	/* spear3xx specific devices */
+
+	/* spear320 specific devices */
+};
+
+static void __init spear320_evb_init(void)
+{
+	unsigned int i;
+
+	/* call spear320 machine init function */
+	spear320_init();
+
+	/* padmux initialization */
+	pmx_driver.mode = &auto_net_mii_mode;
+	pmx_driver.devs = pmx_devs;
+	pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
+	spear320_pmx_init();
+
+	/* Add Platform Devices */
+	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
+
+	/* Add Amba Devices */
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+}
+
+MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
+	.boot_params	=	0x00000100,
+	.map_io		=	spear3xx_map_io,
+	.init_irq	=	spear3xx_init_irq,
+	.timer		=	&spear_sys_timer,
+	.init_machine	=	spear320_evb_init,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear3xx.c linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear3xx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear3xx/spear3xx.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear3xx/spear3xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,548 @@
+/*
+ * arch/arm/mach-spear3xx/spear3xx.c
+ *
+ * SPEAr3XX machines common source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/amba/pl061.h>
+#include <linux/ptrace.h>
+#include <linux/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Add spear3xx machines common devices here */
+/* gpio device registeration */
+static struct pl061_platform_data gpio_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= SPEAR_GPIO_INT_BASE,
+};
+
+struct amba_device gpio_device = {
+	.dev = {
+		.init_name = "gpio",
+		.platform_data = &gpio_plat_data,
+	},
+	.res = {
+		.start = SPEAR3XX_ICM3_GPIO_BASE,
+		.end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_BASIC_GPIO, NO_IRQ},
+};
+
+/* uart device registeration */
+struct amba_device uart_device = {
+	.dev = {
+		.init_name = "uart",
+	},
+	.res = {
+		.start = SPEAR3XX_ICM1_UART_BASE,
+		.end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_UART, NO_IRQ},
+};
+
+/* Do spear3xx familiy common initialization part here */
+void __init spear3xx_init(void)
+{
+	/* nothing to do for now */
+}
+
+/* This will initialize vic */
+void __init spear3xx_init_irq(void)
+{
+	vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0);
+}
+
+/* Following will create static virtual/physical mappings */
+struct map_desc spear3xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR3XX_ICM1_UART_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
+		.length		= SPEAR3XX_ICM1_UART_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR3XX_ML1_VIC_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
+		.length		= SPEAR3XX_ML1_VIC_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
+		.length		= SPEAR3XX_ICM3_SYS_CTRL_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR3XX_ICM3_MISC_REG_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
+		.length		= SPEAR3XX_ICM3_MISC_REG_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear3xx_map_io(void)
+{
+	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
+
+	/* This will initialize clock framework */
+	clk_init();
+}
+
+/* pad multiplexing support */
+/* devices */
+struct pmx_dev_mode pmx_firda_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_FIRDA_MASK,
+	},
+};
+
+struct pmx_dev pmx_firda = {
+	.name = "firda",
+	.modes = pmx_firda_modes,
+	.mode_count = ARRAY_SIZE(pmx_firda_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_i2c_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_I2C_MASK,
+	},
+};
+
+struct pmx_dev pmx_i2c = {
+	.name = "i2c",
+	.modes = pmx_i2c_modes,
+	.mode_count = ARRAY_SIZE(pmx_i2c_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_ssp_cs_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_ssp_cs = {
+	.name = "ssp_chip_selects",
+	.modes = pmx_ssp_cs_modes,
+	.mode_count = ARRAY_SIZE(pmx_ssp_cs_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_ssp_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_SSP_MASK,
+	},
+};
+
+struct pmx_dev pmx_ssp = {
+	.name = "ssp",
+	.modes = pmx_ssp_modes,
+	.mode_count = ARRAY_SIZE(pmx_ssp_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_mii_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_mii = {
+	.name = "mii",
+	.modes = pmx_mii_modes,
+	.mode_count = ARRAY_SIZE(pmx_mii_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_gpio_pin0_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_GPIO_PIN0_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio_pin0 = {
+	.name = "gpio_pin0",
+	.modes = pmx_gpio_pin0_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio_pin0_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_gpio_pin1_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_GPIO_PIN1_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio_pin1 = {
+	.name = "gpio_pin1",
+	.modes = pmx_gpio_pin1_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio_pin1_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_gpio_pin2_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_GPIO_PIN2_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio_pin2 = {
+	.name = "gpio_pin2",
+	.modes = pmx_gpio_pin2_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio_pin2_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_gpio_pin3_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_GPIO_PIN3_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio_pin3 = {
+	.name = "gpio_pin3",
+	.modes = pmx_gpio_pin3_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio_pin3_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_gpio_pin4_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_GPIO_PIN4_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio_pin4 = {
+	.name = "gpio_pin4",
+	.modes = pmx_gpio_pin4_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio_pin4_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_gpio_pin5_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_GPIO_PIN5_MASK,
+	},
+};
+
+struct pmx_dev pmx_gpio_pin5 = {
+	.name = "gpio_pin5",
+	.modes = pmx_gpio_pin5_modes,
+	.mode_count = ARRAY_SIZE(pmx_gpio_pin5_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_uart0_modem_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_UART0_MODEM_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart0_modem = {
+	.name = "uart0_modem",
+	.modes = pmx_uart0_modem_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart0_modem_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_uart0_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_UART0_MASK,
+	},
+};
+
+struct pmx_dev pmx_uart0 = {
+	.name = "uart0",
+	.modes = pmx_uart0_modes,
+	.mode_count = ARRAY_SIZE(pmx_uart0_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_timer_3_4_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_timer_3_4 = {
+	.name = "timer_3_4",
+	.modes = pmx_timer_3_4_modes,
+	.mode_count = ARRAY_SIZE(pmx_timer_3_4_modes),
+	.enb_on_reset = 0,
+};
+
+struct pmx_dev_mode pmx_timer_1_2_modes[] = {
+	{
+		.ids = 0xffffffff,
+		.mask = PMX_TIMER_1_2_MASK,
+	},
+};
+
+struct pmx_dev pmx_timer_1_2 = {
+	.name = "timer_1_2",
+	.modes = pmx_timer_1_2_modes,
+	.mode_count = ARRAY_SIZE(pmx_timer_1_2_modes),
+	.enb_on_reset = 0,
+};
+
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* plgpios devices */
+struct pmx_dev_mode pmx_plgpio_0_1_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_FIRDA_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_0_1 = {
+	.name = "plgpio 0 and 1",
+	.modes = pmx_plgpio_0_1_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_0_1_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_2_3_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_UART0_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_2_3 = {
+	.name = "plgpio 2 and 3",
+	.modes = pmx_plgpio_2_3_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_2_3_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_4_5_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_I2C_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_4_5 = {
+	.name = "plgpio 4 and 5",
+	.modes = pmx_plgpio_4_5_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_4_5_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_6_9_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_SSP_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_6_9 = {
+	.name = "plgpio 6 to 9",
+	.modes = pmx_plgpio_6_9_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_6_9_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_10_27_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_MII_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_10_27 = {
+	.name = "plgpio 10 to 27",
+	.modes = pmx_plgpio_10_27_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_10_27_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_28_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_GPIO_PIN0_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_28 = {
+	.name = "plgpio 28",
+	.modes = pmx_plgpio_28_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_28_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_29_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_GPIO_PIN1_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_29 = {
+	.name = "plgpio 29",
+	.modes = pmx_plgpio_29_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_29_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_30_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_GPIO_PIN2_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_30 = {
+	.name = "plgpio 30",
+	.modes = pmx_plgpio_30_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_30_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_31_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_GPIO_PIN3_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_31 = {
+	.name = "plgpio 31",
+	.modes = pmx_plgpio_31_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_31_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_32_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_GPIO_PIN4_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_32 = {
+	.name = "plgpio 32",
+	.modes = pmx_plgpio_32_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_32_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_33_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_GPIO_PIN5_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_33 = {
+	.name = "plgpio 33",
+	.modes = pmx_plgpio_33_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_33_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_34_36_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_SSP_CS_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_34_36 = {
+	.name = "plgpio 34 to 36",
+	.modes = pmx_plgpio_34_36_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_34_36_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_37_42_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_UART0_MODEM_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_37_42 = {
+	.name = "plgpio 37 to 42",
+	.modes = pmx_plgpio_37_42_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_37_42_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_43_44_47_48_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_TIMER_1_2_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_43_44_47_48 = {
+	.name = "plgpio 43, 44, 47 and 48",
+	.modes = pmx_plgpio_43_44_47_48_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_43_44_47_48_modes),
+	.enb_on_reset = 1,
+};
+
+struct pmx_dev_mode pmx_plgpio_45_46_49_50_modes[] = {
+	{
+		.ids = 0x00,
+		.mask = PMX_TIMER_3_4_MASK,
+	},
+};
+
+struct pmx_dev pmx_plgpio_45_46_49_50 = {
+	.name = "plgpio 45, 46, 49 and 50",
+	.modes = pmx_plgpio_45_46_49_50_modes,
+	.mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
+	.enb_on_reset = 1,
+};
+
+#endif
+
+/* spear padmux initialization function */
+void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size)
+{
+	int ret = 0;
+
+	/* pad mux initialization */
+	pmx_driver->base = ioremap(base, size);
+	if (!pmx_driver->base) {
+		ret = -ENOMEM;
+		goto pmx_fail;
+	}
+
+	ret = pmx_register(pmx_driver);
+	iounmap(pmx_driver->base);
+
+pmx_fail:
+	if (ret)
+		printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+				ret);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/clock.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,483 @@
+/*
+ * arch/arm/mach-spear6xx/clock.c
+ *
+ * SPEAr6xx machines clock framework source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+
+/* root clks */
+/* 32 KHz oscillator clock */
+static struct clk osc_32k_clk = {
+	.flags = ALWAYS_ENABLED,
+	.rate = 32000,
+};
+
+/* 30 MHz oscillator clock */
+static struct clk osc_30m_clk = {
+	.flags = ALWAYS_ENABLED,
+	.rate = 30000000,
+};
+
+/* clock derived from 32 KHz osc clk */
+/* rtc clock */
+static struct clk rtc_clk = {
+	.pclk = &osc_32k_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = RTC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from 30 MHz osc clk */
+/* pll1 configuration structure */
+static struct pll_clk_config pll1_config = {
+	.mode_reg = PLL1_CTR,
+	.cfg_reg = PLL1_FRQ,
+};
+
+/* PLL1 clock */
+static struct clk pll1_clk = {
+	.pclk = &osc_30m_clk,
+	.en_reg = PLL1_CTR,
+	.en_reg_bit = PLL_ENABLE,
+	.recalc = &pll1_clk_recalc,
+	.private_data = &pll1_config,
+};
+
+/* PLL3 48 MHz clock */
+static struct clk pll3_48m_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &osc_30m_clk,
+	.rate = 48000000,
+};
+
+/* watch dog timer clock */
+static struct clk wdt_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &osc_30m_clk,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from pll1 clk */
+/* cpu clock */
+static struct clk cpu_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.recalc = &follow_parent,
+};
+
+/* ahb configuration structure */
+static struct bus_clk_config ahb_config = {
+	.reg = CORE_CLK_CFG,
+	.mask = PLL_HCLK_RATIO_MASK,
+	.shift = PLL_HCLK_RATIO_SHIFT,
+};
+
+/* ahb clock */
+static struct clk ahb_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &pll1_clk,
+	.recalc = &bus_clk_recalc,
+	.private_data = &ahb_config,
+};
+
+/* uart parents */
+static struct pclk_info uart_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* uart parent select structure */
+static struct pclk_sel uart_pclk_sel = {
+	.pclk_info = uart_pclk_info,
+	.pclk_count = ARRAY_SIZE(uart_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = UART_CLK_MASK,
+};
+
+/* uart configurations */
+static struct aux_clk_config uart_config = {
+	.synth_reg = UART_CLK_SYNT,
+};
+
+/* uart0 clock */
+static struct clk uart0_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = UART0_CLK_ENB,
+	.pclk_sel = &uart_pclk_sel,
+	.pclk_sel_shift = UART_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &uart_config,
+};
+
+/* uart1 clock */
+static struct clk uart1_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = UART1_CLK_ENB,
+	.pclk_sel = &uart_pclk_sel,
+	.pclk_sel_shift = UART_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &uart_config,
+};
+
+/* firda configurations */
+static struct aux_clk_config firda_config = {
+	.synth_reg = FIRDA_CLK_SYNT,
+};
+
+/* firda parents */
+static struct pclk_info firda_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* firda parent select structure */
+static struct pclk_sel firda_pclk_sel = {
+	.pclk_info = firda_pclk_info,
+	.pclk_count = ARRAY_SIZE(firda_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = FIRDA_CLK_MASK,
+};
+
+/* firda clock */
+static struct clk firda_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = FIRDA_CLK_ENB,
+	.pclk_sel = &firda_pclk_sel,
+	.pclk_sel_shift = FIRDA_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &firda_config,
+};
+
+/* clcd configurations */
+static struct aux_clk_config clcd_config = {
+	.synth_reg = CLCD_CLK_SYNT,
+};
+
+/* clcd parents */
+static struct pclk_info clcd_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* clcd parent select structure */
+static struct pclk_sel clcd_pclk_sel = {
+	.pclk_info = clcd_pclk_info,
+	.pclk_count = ARRAY_SIZE(clcd_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = CLCD_CLK_MASK,
+};
+
+/* clcd clock */
+static struct clk clcd_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = CLCD_CLK_ENB,
+	.pclk_sel = &clcd_pclk_sel,
+	.pclk_sel_shift = CLCD_CLK_SHIFT,
+	.recalc = &aux_clk_recalc,
+	.private_data = &clcd_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt_pclk_info[] = {
+	{
+		.pclk = &pll1_clk,
+		.pclk_mask = AUX_CLK_PLL1_MASK,
+		.scalable = 1,
+	}, {
+		.pclk = &pll3_48m_clk,
+		.pclk_mask = AUX_CLK_PLL3_MASK,
+		.scalable = 0,
+	},
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt_pclk_sel = {
+	.pclk_info = gpt_pclk_info,
+	.pclk_count = ARRAY_SIZE(gpt_pclk_info),
+	.pclk_sel_reg = PERIP_CLK_CFG,
+	.pclk_sel_mask = GPT_CLK_MASK,
+};
+
+/* gpt0_1 configurations */
+static struct aux_clk_config gpt0_1_config = {
+	.synth_reg = PRSC1_CLK_CFG,
+};
+
+/* gpt0 ARM1 subsystem timer clock */
+static struct clk gpt0_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT0_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt0_1_config,
+};
+
+/* gpt1 timer clock */
+static struct clk gpt1_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT1_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt0_1_config,
+};
+
+/* gpt2 configurations */
+static struct aux_clk_config gpt2_config = {
+	.synth_reg = PRSC2_CLK_CFG,
+};
+
+/* gpt2 timer clock */
+static struct clk gpt2_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPT2_CLK_ENB,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT2_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt2_config,
+};
+
+/* gpt3 configurations */
+static struct aux_clk_config gpt3_config = {
+	.synth_reg = PRSC3_CLK_CFG,
+};
+
+/* gpt3 timer clock */
+static struct clk gpt3_clk = {
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPT3_CLK_ENB,
+	.pclk_sel = &gpt_pclk_sel,
+	.pclk_sel_shift = GPT3_CLK_SHIFT,
+	.recalc = &gpt_clk_recalc,
+	.private_data = &gpt3_config,
+};
+
+/* clock derived from pll3 clk */
+/* usbh0 clock */
+static struct clk usbh0_clk = {
+	.pclk = &pll3_48m_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = USBH0_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* usbh1 clock */
+static struct clk usbh1_clk = {
+	.pclk = &pll3_48m_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = USBH1_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* usbd clock */
+static struct clk usbd_clk = {
+	.pclk = &pll3_48m_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = USBD_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from ahb clk */
+/* apb configuration structure */
+static struct bus_clk_config apb_config = {
+	.reg = CORE_CLK_CFG,
+	.mask = HCLK_PCLK_RATIO_MASK,
+	.shift = HCLK_PCLK_RATIO_SHIFT,
+};
+
+/* apb clock */
+static struct clk apb_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &ahb_clk,
+	.recalc = &bus_clk_recalc,
+	.private_data = &apb_config,
+};
+
+/* i2c clock */
+static struct clk i2c_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = I2C_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* dma clock */
+static struct clk dma_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = DMA_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* jpeg clock */
+static struct clk jpeg_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = JPEG_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* gmac clock */
+static struct clk gmac_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GMAC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* smi clock */
+static struct clk smi_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SMI_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* fsmc clock */
+static struct clk fsmc_clk = {
+	.pclk = &ahb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = FSMC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* clock derived from apb clk */
+/* adc clock */
+static struct clk adc_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = ADC_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* ssp0 clock */
+static struct clk ssp0_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SSP0_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* ssp1 clock */
+static struct clk ssp1_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SSP1_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* ssp2 clock */
+static struct clk ssp2_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = SSP2_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* gpio0 ARM subsystem clock */
+static struct clk gpio0_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &apb_clk,
+	.recalc = &follow_parent,
+};
+
+/* gpio1 clock */
+static struct clk gpio1_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPIO1_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* gpio2 clock */
+static struct clk gpio2_clk = {
+	.pclk = &apb_clk,
+	.en_reg = PERIP1_CLK_ENB,
+	.en_reg_bit = GPIO2_CLK_ENB,
+	.recalc = &follow_parent,
+};
+
+/* array of all spear 6xx clock lookups */
+static struct clk_lookup spear_clk_lookups[] = {
+	/* root clks */
+	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
+	{ .con_id = "osc_30m_clk",	.clk = &osc_30m_clk},
+	/* clock derived from 32 KHz os		 clk */
+	{ .dev_id = "rtc",		.clk = &rtc_clk},
+	/* clock derived from 30 MHz os		 clk */
+	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
+	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
+	{ .dev_id = "wdt",		.clk = &wdt_clk},
+	/* clock derived from pll1 clk */
+	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
+	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
+	{ .dev_id = "uart0",		.clk = &uart0_clk},
+	{ .dev_id = "uart1",		.clk = &uart1_clk},
+	{ .dev_id = "firda",		.clk = &firda_clk},
+	{ .dev_id = "clcd",		.clk = &clcd_clk},
+	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
+	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
+	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
+	{ .dev_id = "gpt3",		.clk = &gpt3_clk},
+	/* clock derived from pll3 clk */
+	{ .dev_id = "usbh0",		.clk = &usbh0_clk},
+	{ .dev_id = "usbh1",		.clk = &usbh1_clk},
+	{ .dev_id = "usbd",		.clk = &usbd_clk},
+	/* clock derived from ahb clk */
+	{ .con_id = "apb_clk",		.clk = &apb_clk},
+	{ .dev_id = "i2c",		.clk = &i2c_clk},
+	{ .dev_id = "dma",		.clk = &dma_clk},
+	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
+	{ .dev_id = "gmac",		.clk = &gmac_clk},
+	{ .dev_id = "smi",		.clk = &smi_clk},
+	{ .dev_id = "fsmc",		.clk = &fsmc_clk},
+	/* clock derived from apb clk */
+	{ .dev_id = "adc",		.clk = &adc_clk},
+	{ .dev_id = "ssp0",		.clk = &ssp0_clk},
+	{ .dev_id = "ssp1",		.clk = &ssp1_clk},
+	{ .dev_id = "ssp2",		.clk = &ssp2_clk},
+	{ .dev_id = "gpio0",		.clk = &gpio0_clk},
+	{ .dev_id = "gpio1",		.clk = &gpio1_clk},
+	{ .dev_id = "gpio2",		.clk = &gpio2_clk},
+};
+
+void __init clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+		clk_register(&spear_clk_lookups[i]);
+
+	recalc_root_clocks();
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/clkdev.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/clkdev.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/clkdev.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/clkdev.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+#include <plat/clkdev.h>
+
+#endif /* __MACH_CLKDEV_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/debug-macro.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <plat/debug-macro.S>
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/entry-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/entry-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/entry-macro.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/entry-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/spear.h>
+#include <asm/hardware/vic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =VA_SPEAR6XX_CPU_VIC_PRI_BASE
+		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get status
+		mov	\irqnr, #0
+		teq	\irqstat, #0
+		bne	1001f
+		ldr	\base, =VA_SPEAR6XX_CPU_VIC_SEC_BASE
+		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get status
+		teq	\irqstat, #0
+		beq	1002f				@ this will set/reset
+							@ zero register
+		mov	\irqnr, #32
+1001:
+		/*
+		 * Following code will find bit position of least significang
+		 * bit set in irqstat, using following equation
+		 * least significant bit set in n = (n & ~(n-1))
+		 */
+		sub	\tmp, \irqstat, #1		@ tmp = irqstat - 1
+		mvn	\tmp, \tmp			@ tmp = ~tmp
+		and	\irqstat, \irqstat, \tmp	@ irqstat &= tmp
+		/* Now, irqstat is = bit no. of 1st bit set in vic irq status */
+		clz	\tmp, \irqstat			@ tmp = leading zeros
+
+		rsb	\tmp, \tmp, #0x1F		@ tmp = 32 - tmp - 1
+		add	\irqnr, \irqnr, \tmp
+
+1002:		/* EQ will be set if no irqs pending */
+		.endm
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/generic.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/generic.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/generic.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/generic.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/generic.h
+ *
+ * SPEAr6XX machine family specific generic header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GENERIC_H
+#define __MACH_GENERIC_H
+
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+
+/*
+ * Each GPT has 2 timer channels
+ * Following GPT channels will be used as clock source and clockevent
+ */
+#define SPEAR_GPT0_BASE		SPEAR6XX_CPU_TMR_BASE
+#define SPEAR_GPT0_CHAN0_IRQ	IRQ_CPU_GPT1_1
+#define SPEAR_GPT0_CHAN1_IRQ	IRQ_CPU_GPT1_2
+
+/* Add spear6xx family device structure declarations here */
+extern struct amba_device gpio_device[];
+extern struct amba_device uart_device[];
+extern struct sys_timer spear_sys_timer;
+
+/* Add spear6xx family function declarations here */
+void __init spear6xx_map_io(void);
+void __init spear6xx_init_irq(void);
+void __init spear6xx_init(void);
+void __init spear600_init(void);
+void __init clk_init(void);
+
+/* Add spear600 machine device structure declarations here */
+
+#endif /* __MACH_GENERIC_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/gpio.h
+ *
+ * GPIO macros for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H
+
+#include <plat/gpio.h>
+
+#endif /* __MACH_GPIO_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/hardware.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/hardware.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/hardware.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/hardware.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/hardware.h
+ *
+ * Hardware definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* Vitual to physical translation of statically mapped space */
+#define IO_ADDRESS(x)		(x | 0xF0000000)
+
+#endif /* __MACH_HARDWARE_H */
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/io.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/io.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/io.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/io.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/io.h
+ *
+ * IO definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IO_H
+#define __MACH_IO_H
+
+#include <plat/io.h>
+
+#endif	/* __MACH_IO_H */
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/irqs.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/irqs.h
+ *
+ * IRQ helper macros for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_IRQS_H
+#define __MACH_IRQS_H
+
+/* IRQ definitions */
+/* VIC 1 */
+#define IRQ_INTRCOMM_SW_IRQ			0
+#define IRQ_INTRCOMM_CPU_1			1
+#define IRQ_INTRCOMM_CPU_2			2
+#define IRQ_INTRCOMM_RAS2A11_1			3
+#define IRQ_INTRCOMM_RAS2A11_2			4
+#define IRQ_INTRCOMM_RAS2A12_1			5
+#define IRQ_INTRCOMM_RAS2A12_2			6
+#define IRQ_GEN_RAS_0				7
+#define IRQ_GEN_RAS_1				8
+#define IRQ_GEN_RAS_2				9
+#define IRQ_GEN_RAS_3				10
+#define IRQ_GEN_RAS_4				11
+#define IRQ_GEN_RAS_5				12
+#define IRQ_GEN_RAS_6				13
+#define IRQ_GEN_RAS_7				14
+#define IRQ_GEN_RAS_8				15
+#define IRQ_CPU_GPT1_1				16
+#define IRQ_CPU_GPT1_2				17
+#define IRQ_LOCAL_GPIO				18
+#define IRQ_PLL_UNLOCK				19
+#define IRQ_JPEG				20
+#define IRQ_FSMC				21
+#define IRQ_IRDA				22
+#define IRQ_RESERVED				23
+#define IRQ_UART_0				24
+#define IRQ_UART_1				25
+#define IRQ_SSP_1				26
+#define IRQ_SSP_2				27
+#define IRQ_I2C					28
+#define IRQ_GEN_RAS_9				29
+#define IRQ_GEN_RAS_10				30
+#define IRQ_GEN_RAS_11				31
+
+/* VIC 2 */
+#define IRQ_APPL_GPT1_1				32
+#define IRQ_APPL_GPT1_2				33
+#define IRQ_APPL_GPT2_1				34
+#define IRQ_APPL_GPT2_2				35
+#define IRQ_APPL_GPIO				36
+#define IRQ_APPL_SSP				37
+#define IRQ_APPL_ADC				38
+#define IRQ_APPL_RESERVED			39
+#define IRQ_AHB_EXP_MASTER			40
+#define IRQ_DDR_CONTROLLER			41
+#define IRQ_BASIC_DMA				42
+#define IRQ_BASIC_RESERVED1			43
+#define IRQ_BASIC_SMI				44
+#define IRQ_BASIC_CLCD				45
+#define IRQ_EXP_AHB_1				46
+#define IRQ_EXP_AHB_2				47
+#define IRQ_BASIC_GPT1_1			48
+#define IRQ_BASIC_GPT1_2			49
+#define IRQ_BASIC_RTC				50
+#define IRQ_BASIC_GPIO				51
+#define IRQ_BASIC_WDT				52
+#define IRQ_BASIC_RESERVED			53
+#define IRQ_AHB_EXP_SLAVE			54
+#define IRQ_GMAC_1				55
+#define IRQ_GMAC_2				56
+#define IRQ_USB_DEV				57
+#define IRQ_USB_H_OHCI_0			58
+#define IRQ_USB_H_EHCI_0			59
+#define IRQ_USB_H_OHCI_1			60
+#define IRQ_USB_H_EHCI_1			61
+#define IRQ_EXP_AHB_3				62
+#define IRQ_EXP_AHB_4				63
+
+#define IRQ_VIC_END				64
+
+/* GPIO pins virtual irqs */
+#define SPEAR_GPIO_INT_BASE	IRQ_VIC_END
+#define SPEAR_GPIO0_INT_BASE	SPEAR_GPIO_INT_BASE
+#define SPEAR_GPIO1_INT_BASE	(SPEAR_GPIO0_INT_BASE + 8)
+#define SPEAR_GPIO2_INT_BASE	(SPEAR_GPIO1_INT_BASE + 8)
+#define SPEAR_GPIO_INT_END	(SPEAR_GPIO2_INT_BASE + 8)
+#define VIRTUAL_IRQS		(SPEAR_GPIO_INT_END - IRQ_VIC_END)
+#define NR_IRQS			(IRQ_VIC_END + VIRTUAL_IRQS)
+
+#endif	/* __MACH_IRQS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/memory.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/memory.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/memory.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/memory.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/memory.h
+ *
+ * Memory map for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MEMORY_H
+#define __MACH_MEMORY_H
+
+#include <plat/memory.h>
+
+#endif	/* __MACH_MEMORY_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/misc_regs.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/misc_regs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/misc_regs.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/misc_regs.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/misc_regs.h
+ *
+ * Miscellaneous registers definitions for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MISC_REGS_H
+#define __MACH_MISC_REGS_H
+
+#include <mach/spear.h>
+
+#define MISC_BASE		VA_SPEAR6XX_ICM3_MISC_REG_BASE
+
+#define SOC_CFG_CTR		((unsigned int *)(MISC_BASE + 0x000))
+#define DIAG_CFG_CTR		((unsigned int *)(MISC_BASE + 0x004))
+#define PLL1_CTR		((unsigned int *)(MISC_BASE + 0x008))
+#define PLL1_FRQ		((unsigned int *)(MISC_BASE + 0x00C))
+#define PLL1_MOD		((unsigned int *)(MISC_BASE + 0x010))
+#define PLL2_CTR		((unsigned int *)(MISC_BASE + 0x014))
+/* PLL_CTR register masks */
+#define PLL_ENABLE		2
+#define PLL_MODE_SHIFT		4
+#define PLL_MODE_MASK		0x3
+#define PLL_MODE_NORMAL		0
+#define PLL_MODE_FRACTION	1
+#define PLL_MODE_DITH_DSB	2
+#define PLL_MODE_DITH_SSB	3
+
+#define PLL2_FRQ		((unsigned int *)(MISC_BASE + 0x018))
+/* PLL FRQ register masks */
+#define PLL_DIV_N_SHIFT		0
+#define PLL_DIV_N_MASK		0xFF
+#define PLL_DIV_P_SHIFT		8
+#define PLL_DIV_P_MASK		0x7
+#define PLL_NORM_FDBK_M_SHIFT	24
+#define PLL_NORM_FDBK_M_MASK	0xFF
+#define PLL_DITH_FDBK_M_SHIFT	16
+#define PLL_DITH_FDBK_M_MASK	0xFFFF
+
+#define PLL2_MOD		((unsigned int *)(MISC_BASE + 0x01C))
+#define PLL_CLK_CFG		((unsigned int *)(MISC_BASE + 0x020))
+#define CORE_CLK_CFG		((unsigned int *)(MISC_BASE + 0x024))
+/* CORE CLK CFG register masks */
+#define PLL_HCLK_RATIO_SHIFT	10
+#define PLL_HCLK_RATIO_MASK	0x3
+#define HCLK_PCLK_RATIO_SHIFT	8
+#define HCLK_PCLK_RATIO_MASK	0x3
+
+#define PERIP_CLK_CFG		((unsigned int *)(MISC_BASE + 0x028))
+/* PERIP_CLK_CFG register masks */
+#define CLCD_CLK_SHIFT		2
+#define CLCD_CLK_MASK		0x3
+#define UART_CLK_SHIFT		4
+#define UART_CLK_MASK		0x1
+#define FIRDA_CLK_SHIFT		5
+#define FIRDA_CLK_MASK		0x3
+#define GPT0_CLK_SHIFT		8
+#define GPT1_CLK_SHIFT		10
+#define GPT2_CLK_SHIFT		11
+#define GPT3_CLK_SHIFT		12
+#define GPT_CLK_MASK		0x1
+#define AUX_CLK_PLL3_MASK	0
+#define AUX_CLK_PLL1_MASK	1
+
+#define PERIP1_CLK_ENB		((unsigned int *)(MISC_BASE + 0x02C))
+/* PERIP1_CLK_ENB register masks */
+#define UART0_CLK_ENB		3
+#define UART1_CLK_ENB		4
+#define SSP0_CLK_ENB		5
+#define SSP1_CLK_ENB		6
+#define I2C_CLK_ENB		7
+#define JPEG_CLK_ENB		8
+#define FSMC_CLK_ENB		9
+#define FIRDA_CLK_ENB		10
+#define GPT2_CLK_ENB		11
+#define GPT3_CLK_ENB		12
+#define GPIO2_CLK_ENB		13
+#define SSP2_CLK_ENB		14
+#define ADC_CLK_ENB		15
+#define GPT1_CLK_ENB		11
+#define RTC_CLK_ENB		17
+#define GPIO1_CLK_ENB		18
+#define DMA_CLK_ENB		19
+#define SMI_CLK_ENB		21
+#define CLCD_CLK_ENB		22
+#define GMAC_CLK_ENB		23
+#define USBD_CLK_ENB		24
+#define USBH0_CLK_ENB		25
+#define USBH1_CLK_ENB		26
+
+#define SOC_CORE_ID		((unsigned int *)(MISC_BASE + 0x030))
+#define RAS_CLK_ENB		((unsigned int *)(MISC_BASE + 0x034))
+#define PERIP1_SOF_RST		((unsigned int *)(MISC_BASE + 0x038))
+/* PERIP1_SOF_RST register masks */
+#define JPEG_SOF_RST		8
+
+#define SOC_USER_ID		((unsigned int *)(MISC_BASE + 0x03C))
+#define RAS_SOF_RST		((unsigned int *)(MISC_BASE + 0x040))
+#define PRSC1_CLK_CFG		((unsigned int *)(MISC_BASE + 0x044))
+#define PRSC2_CLK_CFG		((unsigned int *)(MISC_BASE + 0x048))
+#define PRSC3_CLK_CFG		((unsigned int *)(MISC_BASE + 0x04C))
+/* gpt synthesizer register masks */
+#define GPT_MSCALE_SHIFT	0
+#define GPT_MSCALE_MASK		0xFFF
+#define GPT_NSCALE_SHIFT	12
+#define GPT_NSCALE_MASK		0xF
+
+#define AMEM_CLK_CFG		((unsigned int *)(MISC_BASE + 0x050))
+#define EXPI_CLK_CFG		((unsigned int *)(MISC_BASE + 0x054))
+#define CLCD_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x05C))
+#define FIRDA_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x060))
+#define UART_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x064))
+#define GMAC_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x068))
+#define RAS1_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x06C))
+#define RAS2_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x070))
+#define RAS3_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x074))
+#define RAS4_CLK_SYNT		((unsigned int *)(MISC_BASE + 0x078))
+/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_EQ_SEL_SHIFT	30
+#define AUX_EQ_SEL_MASK		1
+#define AUX_EQ1_SEL		0
+#define AUX_EQ2_SEL		1
+#define AUX_XSCALE_SHIFT	16
+#define AUX_XSCALE_MASK		0xFFF
+#define AUX_YSCALE_SHIFT	0
+#define AUX_YSCALE_MASK		0xFFF
+
+#define ICM1_ARB_CFG		((unsigned int *)(MISC_BASE + 0x07C))
+#define ICM2_ARB_CFG		((unsigned int *)(MISC_BASE + 0x080))
+#define ICM3_ARB_CFG		((unsigned int *)(MISC_BASE + 0x084))
+#define ICM4_ARB_CFG		((unsigned int *)(MISC_BASE + 0x088))
+#define ICM5_ARB_CFG		((unsigned int *)(MISC_BASE + 0x08C))
+#define ICM6_ARB_CFG		((unsigned int *)(MISC_BASE + 0x090))
+#define ICM7_ARB_CFG		((unsigned int *)(MISC_BASE + 0x094))
+#define ICM8_ARB_CFG		((unsigned int *)(MISC_BASE + 0x098))
+#define ICM9_ARB_CFG		((unsigned int *)(MISC_BASE + 0x09C))
+#define DMA_CHN_CFG		((unsigned int *)(MISC_BASE + 0x0A0))
+#define USB2_PHY_CFG		((unsigned int *)(MISC_BASE + 0x0A4))
+#define GMAC_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0A8))
+#define EXPI_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0AC))
+#define PRC1_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C0))
+#define PRC2_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C4))
+#define PRC3_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0C8))
+#define PRC4_LOCK_CTR		((unsigned int *)(MISC_BASE + 0x0CC))
+#define PRC1_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D0))
+#define PRC2_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D4))
+#define PRC3_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0D8))
+#define PRC4_IRQ_CTR		((unsigned int *)(MISC_BASE + 0x0DC))
+#define PWRDOWN_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0E0))
+#define COMPSSTL_1V8_CFG	((unsigned int *)(MISC_BASE + 0x0E4))
+#define COMPSSTL_2V5_CFG	((unsigned int *)(MISC_BASE + 0x0E8))
+#define COMPCOR_3V3_CFG		((unsigned int *)(MISC_BASE + 0x0EC))
+#define SSTLPAD_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F0))
+#define BIST1_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F4))
+#define BIST2_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0F8))
+#define BIST3_CFG_CTR		((unsigned int *)(MISC_BASE + 0x0FC))
+#define BIST4_CFG_CTR		((unsigned int *)(MISC_BASE + 0x100))
+#define BIST5_CFG_CTR		((unsigned int *)(MISC_BASE + 0x104))
+#define BIST1_STS_RES		((unsigned int *)(MISC_BASE + 0x108))
+#define BIST2_STS_RES		((unsigned int *)(MISC_BASE + 0x10C))
+#define BIST3_STS_RES		((unsigned int *)(MISC_BASE + 0x110))
+#define BIST4_STS_RES		((unsigned int *)(MISC_BASE + 0x114))
+#define BIST5_STS_RES		((unsigned int *)(MISC_BASE + 0x118))
+#define SYSERR_CFG_CTR		((unsigned int *)(MISC_BASE + 0x11C))
+
+#endif /* __MACH_MISC_REGS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/spear600.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/spear600.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/spear600.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/spear600.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-spear66xx/include/mach/spear600.h
+ *
+ * SPEAr600 Machine specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifdef	CONFIG_MACH_SPEAR600
+
+#ifndef __MACH_SPEAR600_H
+#define __MACH_SPEAR600_H
+
+#endif /* __MACH_SPEAR600_H */
+
+#endif /* CONFIG_MACH_SPEAR600 */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/spear.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/spear.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/spear.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/spear.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/spear.h
+ *
+ * SPEAr6xx Machine family specific definition
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SPEAR6XX_H
+#define __MACH_SPEAR6XX_H
+
+#include <mach/hardware.h>
+#include <mach/spear600.h>
+
+#define SPEAR6XX_ML_SDRAM_BASE		0x00000000
+#define SPEAR6XX_ML_SDRAM_SIZE		0x40000000
+
+/* ICM1 - Low speed connection */
+#define SPEAR6XX_ICM1_BASE		0xD0000000
+#define SPEAR6XX_ICM1_SIZE		0x08000000
+
+#define SPEAR6XX_ICM1_UART0_BASE	0xD0000000
+#define VA_SPEAR6XX_ICM1_UART0_BASE	IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
+#define SPEAR6XX_ICM1_UART0_SIZE	0x00080000
+
+#define SPEAR6XX_ICM1_UART1_BASE	0xD0080000
+#define SPEAR6XX_ICM1_UART1_SIZE	0x00080000
+
+#define SPEAR6XX_ICM1_SSP0_BASE		0xD0100000
+#define SPEAR6XX_ICM1_SSP0_SIZE		0x00080000
+
+#define SPEAR6XX_ICM1_SSP1_BASE		0xD0180000
+#define SPEAR6XX_ICM1_SSP1_SIZE		0x00080000
+
+#define SPEAR6XX_ICM1_I2C_BASE		0xD0200000
+#define SPEAR6XX_ICM1_I2C_SIZE		0x00080000
+
+#define SPEAR6XX_ICM1_JPEG_BASE		0xD0800000
+#define SPEAR6XX_ICM1_JPEG_SIZE		0x00800000
+
+#define SPEAR6XX_ICM1_IRDA_BASE		0xD1000000
+#define SPEAR6XX_ICM1_IRDA_SIZE		0x00800000
+
+#define SPEAR6XX_ICM1_FSMC_BASE		0xD1800000
+#define SPEAR6XX_ICM1_FSMC_SIZE		0x00800000
+
+#define SPEAR6XX_ICM1_NAND_BASE		0xD2000000
+#define SPEAR6XX_ICM1_NAND_SIZE		0x00800000
+
+#define SPEAR6XX_ICM1_SRAM_BASE		0xD2800000
+#define SPEAR6XX_ICM1_SRAM_SIZE		0x00800000
+
+/* ICM2 - Application Subsystem */
+#define SPEAR6XX_ICM2_BASE		0xD8000000
+#define SPEAR6XX_ICM2_SIZE		0x08000000
+
+#define SPEAR6XX_ICM2_TMR0_BASE		0xD8000000
+#define SPEAR6XX_ICM2_TMR0_SIZE		0x00080000
+
+#define SPEAR6XX_ICM2_TMR1_BASE		0xD8080000
+#define SPEAR6XX_ICM2_TMR1_SIZE		0x00080000
+
+#define SPEAR6XX_ICM2_GPIO_BASE		0xD8100000
+#define SPEAR6XX_ICM2_GPIO_SIZE		0x00080000
+
+#define SPEAR6XX_ICM2_SPI2_BASE		0xD8180000
+#define SPEAR6XX_ICM2_SPI2_SIZE		0x00080000
+
+#define SPEAR6XX_ICM2_ADC_BASE		0xD8200000
+#define SPEAR6XX_ICM2_ADC_SIZE		0x00080000
+
+/* ML-1, 2 - Multi Layer CPU Subsystem */
+#define SPEAR6XX_ML_CPU_BASE		0xF0000000
+#define SPEAR6XX_ML_CPU_SIZE		0x08000000
+
+#define SPEAR6XX_CPU_TMR_BASE		0xF0000000
+#define SPEAR6XX_CPU_TMR_SIZE		0x00100000
+
+#define SPEAR6XX_CPU_GPIO_BASE		0xF0100000
+#define SPEAR6XX_CPU_GPIO_SIZE		0x00100000
+
+#define SPEAR6XX_CPU_VIC_SEC_BASE	0xF1000000
+#define VA_SPEAR6XX_CPU_VIC_SEC_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
+#define SPEAR6XX_CPU_VIC_SEC_SIZE	0x00100000
+
+#define SPEAR6XX_CPU_VIC_PRI_BASE	0xF1100000
+#define VA_SPEAR6XX_CPU_VIC_PRI_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
+#define SPEAR6XX_CPU_VIC_PRI_SIZE	0x00100000
+
+/* ICM3 - Basic Subsystem */
+#define SPEAR6XX_ICM3_BASE		0xF8000000
+#define SPEAR6XX_ICM3_SIZE		0x08000000
+
+#define SPEAR6XX_ICM3_SMEM_BASE		0xF8000000
+#define SPEAR6XX_ICM3_SMEM_SIZE		0x04000000
+
+#define SPEAR6XX_ICM3_SMI_CTRL_BASE	0xFC000000
+#define SPEAR6XX_ICM3_SMI_CTRL_SIZE	0x00200000
+
+#define SPEAR6XX_ICM3_CLCD_BASE		0xFC200000
+#define SPEAR6XX_ICM3_CLCD_SIZE		0x00200000
+
+#define SPEAR6XX_ICM3_DMA_BASE		0xFC400000
+#define SPEAR6XX_ICM3_DMA_SIZE		0x00200000
+
+#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE	0xFC600000
+#define SPEAR6XX_ICM3_SDRAM_CTRL_SIZE	0x00200000
+
+#define SPEAR6XX_ICM3_TMR_BASE		0xFC800000
+#define SPEAR6XX_ICM3_TMR_SIZE		0x00080000
+
+#define SPEAR6XX_ICM3_WDT_BASE		0xFC880000
+#define SPEAR6XX_ICM3_WDT_SIZE		0x00080000
+
+#define SPEAR6XX_ICM3_RTC_BASE		0xFC900000
+#define SPEAR6XX_ICM3_RTC_SIZE		0x00080000
+
+#define SPEAR6XX_ICM3_GPIO_BASE		0xFC980000
+#define SPEAR6XX_ICM3_GPIO_SIZE		0x00080000
+
+#define SPEAR6XX_ICM3_SYS_CTRL_BASE	0xFCA00000
+#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
+#define SPEAR6XX_ICM3_SYS_CTRL_SIZE	0x00080000
+
+#define SPEAR6XX_ICM3_MISC_REG_BASE	0xFCA80000
+#define VA_SPEAR6XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
+#define SPEAR6XX_ICM3_MISC_REG_SIZE	0x00080000
+
+/* ICM4 - High Speed Connection */
+#define SPEAR6XX_ICM4_BASE		0xE0000000
+#define SPEAR6XX_ICM4_SIZE		0x08000000
+
+#define SPEAR6XX_ICM4_GMAC_BASE		0xE0800000
+#define SPEAR6XX_ICM4_GMAC_SIZE		0x00800000
+
+#define SPEAR6XX_ICM4_USBD_FIFO_BASE	0xE1000000
+#define SPEAR6XX_ICM4_USBD_FIFO_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USBD_CSR_BASE	0xE1100000
+#define SPEAR6XX_ICM4_USBD_CSR_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USBD_PLDT_BASE	0xE1200000
+#define SPEAR6XX_ICM4_USBD_PLDT_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USB_EHCI0_BASE	0xE1800000
+#define SPEAR6XX_ICM4_USB_EHCI0_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USB_OHCI0_BASE	0xE1900000
+#define SPEAR6XX_ICM4_USB_OHCI0_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USB_EHCI1_BASE	0xE2000000
+#define SPEAR6XX_ICM4_USB_EHCI1_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USB_OHCI1_BASE	0xE2100000
+#define SPEAR6XX_ICM4_USB_OHCI1_SIZE	0x00100000
+
+#define SPEAR6XX_ICM4_USB_ARB_BASE	0xE2800000
+#define SPEAR6XX_ICM4_USB_ARB_SIZE	0x00010000
+
+/* Debug uart for linux, will be used for debug and uncompress messages */
+#define SPEAR_DBG_UART_BASE		SPEAR6XX_ICM1_UART0_BASE
+#define VA_SPEAR_DBG_UART_BASE		VA_SPEAR6XX_ICM1_UART0_BASE
+
+/* Sysctl base for spear platform */
+#define SPEAR_SYS_CTRL_BASE		SPEAR6XX_ICM3_SYS_CTRL_BASE
+#define VA_SPEAR_SYS_CTRL_BASE		VA_SPEAR6XX_ICM3_SYS_CTRL_BASE
+
+#endif /* __MACH_SPEAR6XX_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/system.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/system.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/system.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/system.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/system.h
+ *
+ * SPEAr6xx Machine family specific architecture functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_SYSTEM_H
+#define __MACH_SYSTEM_H
+
+#include <plat/system.h>
+
+#endif	/* __MACH_SYSTEM_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/timex.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/timex.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/timex.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/timex.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/timex.h
+ *
+ * SPEAr6XX machine family specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_TIMEX_H
+#define __MACH_TIMEX_H
+
+#include <plat/timex.h>
+
+#endif	/* __MACH_TIMEX_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/uncompress.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/uncompress.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/uncompress.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/uncompress.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_UNCOMPRESS_H
+#define __MACH_UNCOMPRESS_H
+
+#include <plat/uncompress.h>
+
+#endif	/* __MACH_UNCOMPRESS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/vmalloc.h linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/vmalloc.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/include/mach/vmalloc.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/include/mach/vmalloc.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-spear6xx/include/mach/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr6xx machine family
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_VMALLOC_H
+#define __MACH_VMALLOC_H
+
+#include <plat/vmalloc.h>
+
+#endif	/* __MACH_VMALLOC_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/Kconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,20 @@
+#
+# SPEAr6XX Machine configuration file
+#
+
+if ARCH_SPEAR6XX
+
+choice
+	prompt "SPEAr6XX Family"
+	default MACH_SPEAR600
+
+config MACH_SPEAR600
+	bool "SPEAr600"
+	help
+	  Supports ST SPEAr600 Machine
+endchoice
+
+# Adding SPEAr6XX machine specific configuration files
+source "arch/arm/mach-spear6xx/Kconfig600"
+
+endif #ARCH_SPEAR6XX
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/Kconfig600 linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/Kconfig600
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/Kconfig600	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/Kconfig600	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,17 @@
+#
+# SPEAr600 machine configuration file
+#
+
+if MACH_SPEAR600
+
+choice
+	prompt "SPEAr600 Boards"
+	default BOARD_SPEAR600_EVB
+
+config	BOARD_SPEAR600_EVB
+	bool "SPEAr600 Evaluation Board"
+	help
+	  Supports ST SPEAr600 Evaluation Board
+endchoice
+
+endif	#MACH_SPEAR600
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/Makefile	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,12 @@
+#
+# Makefile for SPEAr6XX machine series
+#
+
+# common files
+obj-y	+= clock.o spear6xx.o
+
+# spear600 specific files
+obj-$(CONFIG_MACH_SPEAR600) += spear600.o
+
+# spear600 boards files
+obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/Makefile.boot linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/Makefile.boot
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/Makefile.boot	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/Makefile.boot	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,3 @@
+zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/spear600.c linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/spear600.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/spear600.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/spear600.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-spear6xx/spear600.c
+ *
+ * SPEAr600 machine source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>
+#include <asm/irq.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Add spear600 specific devices here */
+
+void __init spear600_init(void)
+{
+	/* call spear6xx family common init function */
+	spear6xx_init();
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/spear600_evb.c linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/spear600_evb.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/spear600_evb.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/spear600_evb.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-spear6xx/spear600_evb.c
+ *
+ * SPEAr600 evaluation board source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+static struct amba_device *amba_devs[] __initdata = {
+	&gpio_device[0],
+	&gpio_device[1],
+	&gpio_device[2],
+	&uart_device[0],
+	&uart_device[1],
+};
+
+static struct platform_device *plat_devs[] __initdata = {
+};
+
+static void __init spear600_evb_init(void)
+{
+	unsigned int i;
+
+	/* call spear600 machine init function */
+	spear600_init();
+
+	/* Add Platform Devices */
+	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
+
+	/* Add Amba Devices */
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+}
+
+MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
+	.boot_params	=	0x00000100,
+	.map_io		=	spear6xx_map_io,
+	.init_irq	=	spear6xx_init_irq,
+	.timer		=	&spear_sys_timer,
+	.init_machine	=	spear600_evb_init,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/spear6xx.c linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/spear6xx.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-spear6xx/spear6xx.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-spear6xx/spear6xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,157 @@
+/*
+ * arch/arm/mach-spear6xx/spear6xx.c
+ *
+ * SPEAr6XX machines common source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/amba/pl061.h>
+#include <linux/ptrace.h>
+#include <linux/io.h>
+#include <asm/hardware/vic.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <mach/irqs.h>
+#include <mach/generic.h>
+#include <mach/spear.h>
+
+/* Add spear6xx machines common devices here */
+/* uart device registeration */
+struct amba_device uart_device[] = {
+	{
+		.dev = {
+			.init_name = "uart0",
+		},
+		.res = {
+			.start = SPEAR6XX_ICM1_UART0_BASE,
+			.end = SPEAR6XX_ICM1_UART0_BASE +
+				SPEAR6XX_ICM1_UART0_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_UART_0, NO_IRQ},
+	}, {
+		.dev = {
+			.init_name = "uart1",
+		},
+		.res = {
+			.start = SPEAR6XX_ICM1_UART1_BASE,
+			.end = SPEAR6XX_ICM1_UART1_BASE +
+				SPEAR6XX_ICM1_UART1_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_UART_1, NO_IRQ},
+	}
+};
+
+/* gpio device registeration */
+static struct pl061_platform_data gpio_plat_data[] = {
+	{
+		.gpio_base	= 0,
+		.irq_base	= SPEAR_GPIO0_INT_BASE,
+	}, {
+		.gpio_base	= 8,
+		.irq_base	= SPEAR_GPIO1_INT_BASE,
+	}, {
+		.gpio_base	= 16,
+		.irq_base	= SPEAR_GPIO2_INT_BASE,
+	},
+};
+
+struct amba_device gpio_device[] = {
+	{
+		.dev = {
+			.init_name = "gpio0",
+			.platform_data = &gpio_plat_data[0],
+		},
+		.res = {
+			.start = SPEAR6XX_CPU_GPIO_BASE,
+			.end = SPEAR6XX_CPU_GPIO_BASE +
+				SPEAR6XX_CPU_GPIO_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_LOCAL_GPIO, NO_IRQ},
+	}, {
+		.dev = {
+			.init_name = "gpio1",
+			.platform_data = &gpio_plat_data[1],
+		},
+		.res = {
+			.start = SPEAR6XX_ICM3_GPIO_BASE,
+			.end = SPEAR6XX_ICM3_GPIO_BASE +
+				SPEAR6XX_ICM3_GPIO_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_BASIC_GPIO, NO_IRQ},
+	}, {
+		.dev = {
+			.init_name = "gpio2",
+			.platform_data = &gpio_plat_data[2],
+		},
+		.res = {
+			.start = SPEAR6XX_ICM2_GPIO_BASE,
+			.end = SPEAR6XX_ICM2_GPIO_BASE +
+				SPEAR6XX_ICM2_GPIO_SIZE - 1,
+			.flags = IORESOURCE_MEM,
+		},
+		.irq = {IRQ_APPL_GPIO, NO_IRQ},
+	}
+};
+
+/* This will add devices, and do machine specific tasks */
+void __init spear6xx_init(void)
+{
+	/* nothing to do for now */
+}
+
+/* This will initialize vic */
+void __init spear6xx_init_irq(void)
+{
+	vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_PRI_BASE, 0, ~0, 0);
+	vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_SEC_BASE, 32, ~0, 0);
+}
+
+/* Following will create static virtual/physical mappings */
+static struct map_desc spear6xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR6XX_ICM1_UART0_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
+		.length		= SPEAR6XX_ICM1_UART0_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR6XX_CPU_VIC_PRI_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
+		.length		= SPEAR6XX_CPU_VIC_PRI_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR6XX_CPU_VIC_SEC_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
+		.length		= SPEAR6XX_CPU_VIC_SEC_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
+		.length		= SPEAR6XX_ICM3_MISC_REG_BASE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR6XX_ICM3_MISC_REG_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
+		.length		= SPEAR6XX_ICM3_MISC_REG_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear6xx_map_io(void)
+{
+	iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
+
+	/* This will initialize clock framework */
+	clk_init();
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-u300/i2c.c linux-libre-2.6.35-gnu/arch/arm/mach-u300/i2c.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-u300/i2c.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-u300/i2c.c	2010-08-01 18:11:14.000000000 -0400
@@ -9,7 +9,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/i2c.h>
-#include <linux/mfd/ab3100.h>
+#include <linux/mfd/abx500.h>
 #include <linux/regulator/machine.h>
 #include <linux/amba/bus.h>
 #include <mach/irqs.h>
@@ -46,6 +46,7 @@
 /* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
 #define BUCK_SLEEP_SETTING	0xAC
 
+#ifdef CONFIG_AB3100_CORE
 static struct regulator_consumer_supply supply_ldo_c[] = {
 	{
 		.dev_name = "ab3100-codec",
@@ -253,14 +254,68 @@
 		LDO_D_SETTING,
 	},
 };
+#endif
+
+#ifdef CONFIG_AB3550_CORE
+static struct abx500_init_settings ab3550_init_settings[] = {
+	{
+		.bank = 0,
+		.reg = AB3550_IMR1,
+		.setting = 0xff
+	},
+	{
+		.bank = 0,
+		.reg = AB3550_IMR2,
+		.setting = 0xff
+	},
+	{
+		.bank = 0,
+		.reg = AB3550_IMR3,
+		.setting = 0xff
+	},
+	{
+		.bank = 0,
+		.reg = AB3550_IMR4,
+		.setting = 0xff
+	},
+	{
+		.bank = 0,
+		.reg = AB3550_IMR5,
+		/* The two most significant bits are not used */
+		.setting = 0x3f
+	},
+};
+
+static struct ab3550_platform_data ab3550_plf_data = {
+	.irq = {
+		.base = IRQ_AB3550_BASE,
+		.count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1),
+	},
+	.dev_data = {
+	},
+	.init_settings = ab3550_init_settings,
+	.init_settings_sz = ARRAY_SIZE(ab3550_init_settings),
+};
+#endif
 
 static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
+#if defined(CONFIG_AB3550_CORE)
+	{
+		.type = "ab3550",
+		.addr = 0x4A,
+		.irq = IRQ_U300_IRQ0_EXT,
+		.platform_data = &ab3550_plf_data,
+	},
+#elif defined(CONFIG_AB3100_CORE)
 	{
 		.type = "ab3100",
 		.addr = 0x48,
 		.irq = IRQ_U300_IRQ0_EXT,
 		.platform_data = &ab3100_plf_data,
 	},
+#else
+	{ },
+#endif
 };
 
 static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-u300/include/mach/coh901318.h linux-libre-2.6.35-gnu/arch/arm/mach-u300/include/mach/coh901318.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-u300/include/mach/coh901318.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-u300/include/mach/coh901318.h	2010-08-01 18:11:14.000000000 -0400
@@ -103,27 +103,6 @@
 };
 
 /**
- * coh901318_get_bytes_left() - Get number of bytes left on a current transfer
- * @chan: dma channel handle
- * return number of bytes left, or negative on error
- */
-u32 coh901318_get_bytes_left(struct dma_chan *chan);
-
-/**
- * coh901318_stop() - Stops dma transfer
- * @chan: dma channel handle
- * return 0 on success otherwise negative value
- */
-void coh901318_stop(struct dma_chan *chan);
-
-/**
- * coh901318_continue() - Resumes a stopped dma transfer
- * @chan: dma channel handle
- * return 0 on success otherwise negative value
- */
-void coh901318_continue(struct dma_chan *chan);
-
-/**
  * coh901318_filter_id() - DMA channel filter function
  * @chan: dma channel handle
  * @chan_id: id of dma channel to be filter out
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-u300/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-u300/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-u300/include/mach/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-u300/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -109,6 +109,13 @@
 #define U300_NR_IRQS			48
 #endif
 
+#ifdef CONFIG_AB3550_CORE
+#define IRQ_AB3550_BASE			(U300_NR_IRQS)
+#define IRQ_AB3550_END			(IRQ_AB3550_BASE + 37)
+
+#define NR_IRQS				(IRQ_AB3550_END + 1)
+#else
 #define NR_IRQS U300_NR_IRQS
+#endif
 
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-u300/mmc.c linux-libre-2.6.35-gnu/arch/arm/mach-u300/mmc.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-u300/mmc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-u300/mmc.c	2010-08-01 18:11:14.000000000 -0400
@@ -102,11 +102,12 @@
 	 * we have a regulator we can control instead.
 	 */
 	/* Nominally 2.85V on our platform */
+	mmci_card->mmc0_plat_data.f_max = 24000000;
 	mmci_card->mmc0_plat_data.status = mmc_status;
 	mmci_card->mmc0_plat_data.gpio_wp = -1;
 	mmci_card->mmc0_plat_data.gpio_cd = -1;
 	mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED |
-		MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA;
+		MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
 
 	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/board-mop500.c linux-libre-2.6.35-gnu/arch/arm/mach-ux500/board-mop500.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/board-mop500.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/board-mop500.c	2010-08-01 18:11:14.000000000 -0400
@@ -17,37 +17,14 @@
 #include <linux/amba/pl022.h>
 #include <linux/spi/spi.h>
 
-#include <asm/localtimer.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <plat/mtu.h>
 #include <plat/i2c.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
-
-#define __MEM_4K_RESOURCE(x) \
-	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
-
-/* These are active devices on this board */
-static struct amba_device uart0_device = {
-	.dev = { .init_name = "uart0" },
-	__MEM_4K_RESOURCE(U8500_UART0_BASE),
-	.irq = {IRQ_UART0, NO_IRQ},
-};
-
-static struct amba_device uart1_device = {
-	.dev = { .init_name = "uart1" },
-	__MEM_4K_RESOURCE(U8500_UART1_BASE),
-	.irq = {IRQ_UART1, NO_IRQ},
-};
-
-static struct amba_device uart2_device = {
-	.dev = { .init_name = "uart2" },
-	__MEM_4K_RESOURCE(U8500_UART2_BASE),
-	.irq = {IRQ_UART2, NO_IRQ},
-};
+#include <mach/devices.h>
 
 static void ab4500_spi_cs_control(u32 command)
 {
@@ -73,7 +50,7 @@
 
 static struct spi_board_info u8500_spi_devices[] = {
 	{
-		.modalias = "ab4500",
+		.modalias = "ab8500",
 		.controller_data = &ab4500_chip_info,
 		.max_speed_hz = 12000000,
 		.bus_num = 0,
@@ -93,55 +70,8 @@
 	.num_chipselect = 5,
 };
 
-static struct amba_device pl022_device = {
-	.dev = {
-		.coherent_dma_mask = ~0,
-		.init_name = "pl022",
-		.platform_data = &ssp0_platform_data,
-	},
-	.res = {
-		.start = U8500_SSP0_BASE,
-		.end   = U8500_SSP0_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_SSP0, NO_IRQ },
-	/* ST-Ericsson modified id */
-	.periphid = SSP_PER_ID,
-};
-
-static struct amba_device pl031_device = {
-	.dev = {
-		.init_name = "pl031",
-	},
-	.res = {
-		.start = U8500_RTC_BASE,
-		.end = U8500_RTC_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_RTC_RTT, NO_IRQ},
-};
-
-#define U8500_I2C_RESOURCES(id, size)		\
-static struct resource u8500_i2c_resources_##id[] = {	\
-	[0] = {					\
-		.start	= U8500_I2C##id##_BASE,	\
-		.end	= U8500_I2C##id##_BASE + size - 1, \
-		.flags	= IORESOURCE_MEM,	\
-	},					\
-	[1] = {					\
-		.start	= IRQ_I2C##id,		\
-		.end	= IRQ_I2C##id,		\
-		.flags	= IORESOURCE_IRQ	\
-	}					\
-}
-
-U8500_I2C_RESOURCES(0, SZ_4K);
-U8500_I2C_RESOURCES(1, SZ_4K);
-U8500_I2C_RESOURCES(2, SZ_4K);
-U8500_I2C_RESOURCES(3, SZ_4K);
-
 #define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
-static struct nmk_i2c_controller u8500_i2c_##id = { \
+static struct nmk_i2c_controller u8500_i2c##id##_data = { \
 	/*				\
 	 * slave data setup time, which is	\
 	 * 250 ns,100ns,10ns which is 14,6,2	\
@@ -169,58 +99,32 @@
 U8500_I2C_CONTROLLER(2,	0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
 U8500_I2C_CONTROLLER(3,	0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
 
-#define U8500_I2C_PDEVICE(cid)		\
-static struct platform_device i2c_controller##cid = { \
-	.name = "nmk-i2c",		\
-	.id	 = cid,			\
-	.num_resources = 2,		\
-	.resource = u8500_i2c_resources_##cid,	\
-	.dev = {			\
-		.platform_data = &u8500_i2c_##cid \
-	}				\
-}
-
-U8500_I2C_PDEVICE(0);
-U8500_I2C_PDEVICE(1);
-U8500_I2C_PDEVICE(2);
-U8500_I2C_PDEVICE(3);
-
 static struct amba_device *amba_devs[] __initdata = {
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&pl022_device,
-	&pl031_device,
+	&ux500_uart0_device,
+	&ux500_uart1_device,
+	&ux500_uart2_device,
+	&u8500_ssp0_device,
 };
 
 /* add any platform devices here - TODO */
 static struct platform_device *platform_devs[] __initdata = {
-	&i2c_controller0,
-	&i2c_controller1,
-	&i2c_controller2,
-	&i2c_controller3,
-};
-
-static void __init u8500_timer_init(void)
-{
-#ifdef CONFIG_LOCAL_TIMERS
-	/* Setup the local timer base */
-	twd_base = __io_address(U8500_TWD_BASE);
-#endif
-	/* Setup the MTU base */
-	mtu_base = __io_address(U8500_MTU0_BASE);
-
-	nmdk_timer_init();
-}
-
-static struct sys_timer u8500_timer = {
-	.init	= u8500_timer_init,
+	&u8500_i2c0_device,
+	&ux500_i2c1_device,
+	&ux500_i2c2_device,
+	&ux500_i2c3_device,
 };
 
 static void __init u8500_init_machine(void)
 {
 	int i;
 
+	u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
+	ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
+	ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
+	ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;
+
+	u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;
+
 	/* Register the active AMBA devices on this board */
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
 		amba_device_register(amba_devs[i], &iomem_resource);
@@ -239,8 +143,8 @@
 	.io_pg_offst	= (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x100,
 	.map_io		= u8500_map_io,
-	.init_irq	= u8500_init_irq,
+	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
-	.timer		= &u8500_timer,
+	.timer		= &ux500_timer,
 	.init_machine	= u8500_init_machine,
 MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/board-u5500.c linux-libre-2.6.35-gnu/arch/arm/mach-ux500/board-u5500.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/board-u5500.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/board-u5500.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/devices.h>
+#include <mach/setup.h>
+
+static struct amba_device *amba_board_devs[] __initdata = {
+	&ux500_uart0_device,
+	&ux500_uart1_device,
+	&ux500_uart2_device,
+};
+
+static void __init u5500_init_machine(void)
+{
+	u5500_init_devices();
+
+	amba_add_devices(amba_board_devs, ARRAY_SIZE(amba_board_devs));
+}
+
+MACHINE_START(U8500, "ST-Ericsson U5500 Platform")
+	.phys_io	= UX500_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(UX500_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= u5500_map_io,
+	.init_irq	= ux500_init_irq,
+	.timer		= &ux500_timer,
+	.init_machine	= u5500_init_machine,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-ux500/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,6 +1,6 @@
 /*
  *  Copyright (C) 2009 ST-Ericsson
- * 	heavily based on realview platform
+ *  Copyright (C) 2009 STMicroelectronics
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -12,33 +12,219 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/mutex.h>
+#include <linux/io.h>
 
 #include <asm/clkdev.h>
 
-/* currently the clk structure
- * just supports rate. This would
- * be extended as and when new devices are
- * added - TODO
- */
-struct clk {
-	unsigned long		rate;
-};
+#include <plat/mtu.h>
+#include <mach/hardware.h>
+#include "clock.h"
+
+#define PRCC_PCKEN		0x00
+#define PRCC_PCKDIS		0x04
+#define PRCC_KCKEN		0x08
+#define PRCC_KCKDIS		0x0C
+
+#define PRCM_YYCLKEN0_MGT_SET	0x510
+#define PRCM_YYCLKEN1_MGT_SET	0x514
+#define PRCM_YYCLKEN0_MGT_CLR	0x518
+#define PRCM_YYCLKEN1_MGT_CLR	0x51C
+#define PRCM_YYCLKEN0_MGT_VAL	0x520
+#define PRCM_YYCLKEN1_MGT_VAL	0x524
+
+#define PRCM_SVAMMDSPCLK_MGT	0x008
+#define PRCM_SIAMMDSPCLK_MGT	0x00C
+#define PRCM_SGACLK_MGT		0x014
+#define PRCM_UARTCLK_MGT	0x018
+#define PRCM_MSP02CLK_MGT	0x01C
+#define PRCM_MSP1CLK_MGT	0x288
+#define PRCM_I2CCLK_MGT		0x020
+#define PRCM_SDMMCCLK_MGT	0x024
+#define PRCM_SLIMCLK_MGT	0x028
+#define PRCM_PER1CLK_MGT	0x02C
+#define PRCM_PER2CLK_MGT	0x030
+#define PRCM_PER3CLK_MGT	0x034
+#define PRCM_PER5CLK_MGT	0x038
+#define PRCM_PER6CLK_MGT	0x03C
+#define PRCM_PER7CLK_MGT	0x040
+#define PRCM_LCDCLK_MGT		0x044
+#define PRCM_BMLCLK_MGT		0x04C
+#define PRCM_HSITXCLK_MGT	0x050
+#define PRCM_HSIRXCLK_MGT	0x054
+#define PRCM_HDMICLK_MGT	0x058
+#define PRCM_APEATCLK_MGT	0x05C
+#define PRCM_APETRACECLK_MGT	0x060
+#define PRCM_MCDECLK_MGT	0x064
+#define PRCM_IPI2CCLK_MGT	0x068
+#define PRCM_DSIALTCLK_MGT	0x06C
+#define PRCM_DMACLK_MGT		0x074
+#define PRCM_B2R2CLK_MGT	0x078
+#define PRCM_TVCLK_MGT		0x07C
+#define PRCM_TCR		0x1C8
+#define PRCM_TCR_STOPPED	(1 << 16)
+#define PRCM_TCR_DOZE_MODE	(1 << 17)
+#define PRCM_UNIPROCLK_MGT	0x278
+#define PRCM_SSPCLK_MGT		0x280
+#define PRCM_RNGCLK_MGT		0x284
+#define PRCM_UICCCLK_MGT	0x27C
+
+#define PRCM_MGT_ENABLE		(1 << 8)
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (clk->enabled++ == 0) {
+		if (clk->parent_cluster)
+			__clk_enable(clk->parent_cluster);
+
+		if (clk->parent_periph)
+			__clk_enable(clk->parent_periph);
+
+		if (clk->ops && clk->ops->enable)
+			clk->ops->enable(clk);
+	}
+}
 
 int clk_enable(struct clk *clk)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
 
+static void __clk_disable(struct clk *clk)
+{
+	if (--clk->enabled == 0) {
+		if (clk->ops && clk->ops->disable)
+			clk->ops->disable(clk);
+
+		if (clk->parent_periph)
+			__clk_disable(clk->parent_periph);
+
+		if (clk->parent_cluster)
+			__clk_disable(clk->parent_cluster);
+	}
+}
+
 void clk_disable(struct clk *clk)
 {
+	unsigned long flags;
+
+	WARN_ON(!clk->enabled);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clocks_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
+/*
+ * The MTU has a separate, rather complex muxing setup
+ * with alternative parents (peripheral cluster or
+ * ULP or fixed 32768 Hz) depending on settings
+ */
+static unsigned long clk_mtu_get_rate(struct clk *clk)
+{
+	void __iomem *addr = __io_address(UX500_PRCMU_BASE)
+		+ PRCM_TCR;
+	u32 tcr = readl(addr);
+	int mtu = (int) clk->data;
+	/*
+	 * One of these is selected eventually
+	 * TODO: Replace the constant with a reference
+	 * to the ULP source once this is modeled.
+	 */
+	unsigned long clk32k = 32768;
+	unsigned long mturate;
+	unsigned long retclk;
+
+	/* Get the rate from the parent as a default */
+	if (clk->parent_periph)
+		mturate = clk_get_rate(clk->parent_periph);
+	else if (clk->parent_cluster)
+		mturate = clk_get_rate(clk->parent_cluster);
+	else
+		/* We need to be connected SOMEWHERE */
+		BUG();
+
+	/*
+	 * Are we in doze mode?
+	 * In this mode the parent peripheral or the fixed 32768 Hz
+	 * clock is fed into the block.
+	 */
+	if (!(tcr & PRCM_TCR_DOZE_MODE)) {
+		/*
+		 * Here we're using the clock input from the APE ULP
+		 * clock domain. But first: are the timers stopped?
+		 */
+		if (tcr & PRCM_TCR_STOPPED) {
+			clk32k = 0;
+			mturate = 0;
+		} else {
+			/* Else default mode: 0 and 2.4 MHz */
+			clk32k = 0;
+			if (cpu_is_u5500())
+				/* DB5500 divides by 8 */
+				mturate /= 8;
+			else if (cpu_is_u8500ed()) {
+				/*
+				 * This clocking setting must not be used
+				 * in the ED chip, it is simply not
+				 * connected anywhere!
+				 */
+				mturate = 0;
+				BUG();
+			} else
+				/*
+				 * In this mode the ulp38m4 clock is divided
+				 * by a factor 16, on the DB8500 typically
+				 * 38400000 / 16 ~ 2.4 MHz.
+				 * TODO: Replace the constant with a reference
+				 * to the ULP source once this is modeled.
+				 */
+				mturate = 38400000 / 16;
+		}
+	}
+
+	/* Return the clock selected for this MTU */
+	if (tcr & (1 << mtu))
+		retclk = clk32k;
+	else
+		retclk = mturate;
+
+	pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
+	return retclk;
+}
+
 unsigned long clk_get_rate(struct clk *clk)
 {
-	return clk->rate;
+	unsigned long rate;
+
+	/*
+	 * If there is a custom getrate callback for this clock,
+	 * it will take precedence.
+	 */
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
+	if (clk->ops && clk->ops->get_rate)
+		return clk->ops->get_rate(clk);
+
+	rate = clk->rate;
+	if (!rate) {
+		if (clk->parent_periph)
+			rate = clk_get_rate(clk->parent_periph);
+		else if (clk->parent_cluster)
+			rate = clk_get_rate(clk->parent_cluster);
+	}
+
+	return rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
 
@@ -56,37 +242,376 @@
 }
 EXPORT_SYMBOL(clk_set_rate);
 
-/* ssp clock */
-static struct clk ssp_clk = {
-	.rate = 48000000,
+static void clk_prcmu_enable(struct clk *clk)
+{
+	void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
+				   + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
+
+	writel(1 << clk->prcmu_cg_bit, cg_set_reg);
+}
+
+static void clk_prcmu_disable(struct clk *clk)
+{
+	void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
+				   + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
+
+	writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
+}
+
+/* ED doesn't have the combined set/clr registers */
+static void clk_prcmu_ed_enable(struct clk *clk)
+{
+	void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+			     + clk->prcmu_cg_mgt;
+
+	writel(readl(addr) | PRCM_MGT_ENABLE, addr);
+}
+
+static void clk_prcmu_ed_disable(struct clk *clk)
+{
+	void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+			     + clk->prcmu_cg_mgt;
+
+	writel(readl(addr) & ~PRCM_MGT_ENABLE, addr);
+}
+
+static struct clkops clk_prcmu_ops = {
+	.enable = clk_prcmu_enable,
+	.disable = clk_prcmu_disable,
 };
 
-/* fixed clock */
-static struct clk f38_clk = {
-	.rate = 38400000,
+static unsigned int clkrst_base[] = {
+	[1] = U8500_CLKRST1_BASE,
+	[2] = U8500_CLKRST2_BASE,
+	[3] = U8500_CLKRST3_BASE,
+	[5] = U8500_CLKRST5_BASE,
+	[6] = U8500_CLKRST6_BASE,
+	[7] = U8500_CLKRST7_BASE_ED,
 };
 
-static struct clk_lookup lookups[] = {
-	{
-		/* UART0 */
-		.dev_id		= "uart0",
-		.clk		= &f38_clk,
-	}, {	/* UART1 */
-		.dev_id		= "uart1",
-		.clk		= &f38_clk,
-	}, {	/* UART2 */
-		.dev_id		= "uart2",
-		.clk		= &f38_clk,
-	}, {	/* SSP */
-		.dev_id		= "pl022",
-		.clk		= &ssp_clk,
-	}
+static void clk_prcc_enable(struct clk *clk)
+{
+	void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
+
+	if (clk->prcc_kernel != -1)
+		writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
+
+	if (clk->prcc_bus != -1)
+		writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
+}
+
+static void clk_prcc_disable(struct clk *clk)
+{
+	void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
+
+	if (clk->prcc_bus != -1)
+		writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
+
+	if (clk->prcc_kernel != -1)
+		writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
+}
+
+static struct clkops clk_prcc_ops = {
+	.enable = clk_prcc_enable,
+	.disable = clk_prcc_disable,
 };
 
-static int __init clk_init(void)
+static struct clk clk_32khz = {
+	.rate = 32000,
+};
+
+/*
+ * PRCMU level clock gating
+ */
+
+/* Bank 0 */
+static DEFINE_PRCMU_CLK(svaclk,		0x0, 2, SVAMMDSPCLK);
+static DEFINE_PRCMU_CLK(siaclk,		0x0, 3, SIAMMDSPCLK);
+static DEFINE_PRCMU_CLK(sgaclk,		0x0, 4, SGACLK);
+static DEFINE_PRCMU_CLK_RATE(uartclk,	0x0, 5, UARTCLK, 38400000);
+static DEFINE_PRCMU_CLK(msp02clk,	0x0, 6, MSP02CLK);
+static DEFINE_PRCMU_CLK(msp1clk,	0x0, 7, MSP1CLK); /* v1 */
+static DEFINE_PRCMU_CLK_RATE(i2cclk,	0x0, 8, I2CCLK, 48000000);
+static DEFINE_PRCMU_CLK_RATE(sdmmcclk,	0x0, 9, SDMMCCLK, 50000000);
+static DEFINE_PRCMU_CLK(slimclk,	0x0, 10, SLIMCLK);
+static DEFINE_PRCMU_CLK(per1clk,	0x0, 11, PER1CLK);
+static DEFINE_PRCMU_CLK(per2clk,	0x0, 12, PER2CLK);
+static DEFINE_PRCMU_CLK(per3clk,	0x0, 13, PER3CLK);
+static DEFINE_PRCMU_CLK(per5clk,	0x0, 14, PER5CLK);
+static DEFINE_PRCMU_CLK_RATE(per6clk,	0x0, 15, PER6CLK, 133330000);
+static DEFINE_PRCMU_CLK_RATE(per7clk,	0x0, 16, PER7CLK, 100000000);
+static DEFINE_PRCMU_CLK(lcdclk,		0x0, 17, LCDCLK);
+static DEFINE_PRCMU_CLK(bmlclk,		0x0, 18, BMLCLK);
+static DEFINE_PRCMU_CLK(hsitxclk,	0x0, 19, HSITXCLK);
+static DEFINE_PRCMU_CLK(hsirxclk,	0x0, 20, HSIRXCLK);
+static DEFINE_PRCMU_CLK(hdmiclk,	0x0, 21, HDMICLK);
+static DEFINE_PRCMU_CLK(apeatclk,	0x0, 22, APEATCLK);
+static DEFINE_PRCMU_CLK(apetraceclk,	0x0, 23, APETRACECLK);
+static DEFINE_PRCMU_CLK(mcdeclk,	0x0, 24, MCDECLK);
+static DEFINE_PRCMU_CLK(ipi2clk,	0x0, 25, IPI2CCLK);
+static DEFINE_PRCMU_CLK(dsialtclk,	0x0, 26, DSIALTCLK); /* v1 */
+static DEFINE_PRCMU_CLK(dmaclk,		0x0, 27, DMACLK);
+static DEFINE_PRCMU_CLK(b2r2clk,	0x0, 28, B2R2CLK);
+static DEFINE_PRCMU_CLK(tvclk,		0x0, 29, TVCLK);
+static DEFINE_PRCMU_CLK(uniproclk,	0x0, 30, UNIPROCLK); /* v1 */
+static DEFINE_PRCMU_CLK_RATE(sspclk,	0x0, 31, SSPCLK, 48000000); /* v1 */
+
+/* Bank 1 */
+static DEFINE_PRCMU_CLK(rngclk,		0x4, 0, RNGCLK); /* v1 */
+static DEFINE_PRCMU_CLK(uiccclk,	0x4, 1, UICCCLK); /* v1 */
+
+/*
+ * PRCC level clock gating
+ * Format: per#, clk, PCKEN bit, KCKEN bit, parent
+ */
+
+/* Peripheral Cluster #1 */
+static DEFINE_PRCC_CLK(1, i2c4, 	10, 9, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, gpio0,	9, -1, NULL);
+static DEFINE_PRCC_CLK(1, slimbus0, 	8,  8, &clk_slimclk);
+static DEFINE_PRCC_CLK(1, spi3_ed, 	7,  7, NULL);
+static DEFINE_PRCC_CLK(1, spi3_v1, 	7, -1, NULL);
+static DEFINE_PRCC_CLK(1, i2c2, 	6,  6, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, sdi0,		5,  5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(1, msp1_ed, 	4,  4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, msp1_v1, 	4,  4, &clk_msp1clk);
+static DEFINE_PRCC_CLK(1, msp0, 	3,  3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, i2c1, 	2,  2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, uart1, 	1,  1, &clk_uartclk);
+static DEFINE_PRCC_CLK(1, uart0, 	0,  0, &clk_uartclk);
+
+/* Peripheral Cluster #2 */
+
+static DEFINE_PRCC_CLK(2, gpio1_ed,	12, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssitx_ed, 	11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_ed, 	10, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi0_ed, 	 9, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_ed, 	 8,  6, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_ed, 	 7,  5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_ed, 	 6,  4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_ed, 	 4,  2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, pwl_ed,	 3,  1, NULL);
+static DEFINE_PRCC_CLK(2, spi1_ed, 	 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_ed, 	 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_ed, 	 0,  0, &clk_i2cclk);
+
+static DEFINE_PRCC_CLK(2, gpio1_v1,	11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssitx_v1, 	10,  7, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_v1, 	 9,  6, NULL);
+static DEFINE_PRCC_CLK(2, spi0_v1, 	 8, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_v1, 	 7,  5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_v1, 	 6,  4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_v1, 	 5,  3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_v1, 	 4,  2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, pwl_v1,	 3,  1, NULL);
+static DEFINE_PRCC_CLK(2, spi1_v1, 	 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_v1, 	 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_v1, 	 0,  0, &clk_i2cclk);
+
+/* Peripheral Cluster #3 */
+static DEFINE_PRCC_CLK(3, gpio2, 	8, -1, NULL);
+static DEFINE_PRCC_CLK(3, sdi5, 	7,  7, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, uart2, 	6,  6, &clk_uartclk);
+static DEFINE_PRCC_CLK(3, ske, 		5,  5, &clk_32khz);
+static DEFINE_PRCC_CLK(3, sdi2, 	4,  4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, i2c0, 	3,  3, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_ed, 	2,  2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp0_ed, 	1,  1, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_v1, 	2,  2, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, ssp0_v1, 	1,  1, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, fsmc, 	0, -1, NULL);
+
+/* Peripheral Cluster #4 is in the always on domain */
+
+/* Peripheral Cluster #5 */
+static DEFINE_PRCC_CLK(5, gpio3, 	1, -1, NULL);
+static DEFINE_PRCC_CLK(5, usb_ed, 	0,  0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(5, usb_v1, 	0,  0, NULL);
+
+/* Peripheral Cluster #6 */
+
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
+static DEFINE_PRCC_CLK(6, cfgreg_v1, 	6,  6, NULL);
+static DEFINE_PRCC_CLK(6, dmc_ed, 	6,  6, NULL);
+static DEFINE_PRCC_CLK(6, hash1, 	5, -1, NULL);
+static DEFINE_PRCC_CLK(6, unipro_v1, 	4,  1, &clk_uniproclk);
+static DEFINE_PRCC_CLK(6, cryp1_ed, 	4, -1, NULL);
+static DEFINE_PRCC_CLK(6, pka, 		3, -1, NULL);
+static DEFINE_PRCC_CLK(6, hash0, 	2, -1, NULL);
+static DEFINE_PRCC_CLK(6, cryp0, 	1, -1, NULL);
+static DEFINE_PRCC_CLK(6, rng_ed, 	0,  0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(6, rng_v1, 	0,  0, &clk_rngclk);
+
+/* Peripheral Cluster #7 */
+
+static DEFINE_PRCC_CLK(7, tzpc0_ed, 	4, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
+static DEFINE_PRCC_CLK(7, wdg_ed, 	1, -1, NULL);
+static DEFINE_PRCC_CLK(7, cfgreg_ed, 	0, -1, NULL);
+
+static struct clk_lookup u8500_common_clks[] = {
+	/* Peripheral Cluster #1 */
+	CLK(gpio0,	"gpio.0",	NULL),
+	CLK(gpio0,	"gpio.1",	NULL),
+	CLK(slimbus0,	"slimbus0",	NULL),
+	CLK(i2c2,	"nmk-i2c.2",	NULL),
+	CLK(sdi0,	"sdi0",		NULL),
+	CLK(msp0,	"msp0",		NULL),
+	CLK(i2c1,	"nmk-i2c.1",	NULL),
+	CLK(uart1,	"uart1",	NULL),
+	CLK(uart0,	"uart0",	NULL),
+
+	/* Peripheral Cluster #3 */
+	CLK(gpio2,	"gpio.2",	NULL),
+	CLK(gpio2,	"gpio.3",	NULL),
+	CLK(gpio2,	"gpio.4",	NULL),
+	CLK(gpio2,	"gpio.5",	NULL),
+	CLK(sdi5,	"sdi5",		NULL),
+	CLK(uart2,	"uart2",	NULL),
+	CLK(ske,	"ske",		NULL),
+	CLK(sdi2,	"sdi2",		NULL),
+	CLK(i2c0,	"nmk-i2c.0",	NULL),
+	CLK(fsmc,	"fsmc",		NULL),
+
+	/* Peripheral Cluster #5 */
+	CLK(gpio3,	"gpio.8",	NULL),
+
+	/* Peripheral Cluster #6 */
+	CLK(hash1,	"hash1",	NULL),
+	CLK(pka,	"pka",		NULL),
+	CLK(hash0,	"hash0",	NULL),
+	CLK(cryp0,	"cryp0",	NULL),
+
+	/* PRCMU level clock gating */
+
+	/* Bank 0 */
+	CLK(svaclk,	"sva",		NULL),
+	CLK(siaclk,	"sia",		NULL),
+	CLK(sgaclk,	"sga",		NULL),
+	CLK(slimclk,	"slim",		NULL),
+	CLK(lcdclk,	"lcd",		NULL),
+	CLK(bmlclk,	"bml",		NULL),
+	CLK(hsitxclk,	"stm-hsi.0",	NULL),
+	CLK(hsirxclk,	"stm-hsi.1",	NULL),
+	CLK(hdmiclk,	"hdmi",		NULL),
+	CLK(apeatclk,	"apeat",	NULL),
+	CLK(apetraceclk,	"apetrace",	NULL),
+	CLK(mcdeclk,	"mcde",		NULL),
+	CLK(ipi2clk,	"ipi2",		NULL),
+	CLK(dmaclk,	"dma40.0",	NULL),
+	CLK(b2r2clk,	"b2r2",		NULL),
+	CLK(tvclk,	"tv",		NULL),
+};
+
+static struct clk_lookup u8500_ed_clks[] = {
+	/* Peripheral Cluster #1 */
+	CLK(spi3_ed,	"spi3",		NULL),
+	CLK(msp1_ed,	"msp1",		NULL),
+
+	/* Peripheral Cluster #2 */
+	CLK(gpio1_ed,	"gpio.6",	NULL),
+	CLK(gpio1_ed,	"gpio.7",	NULL),
+	CLK(ssitx_ed,	"ssitx",	NULL),
+	CLK(ssirx_ed,	"ssirx",	NULL),
+	CLK(spi0_ed,	"spi0",		NULL),
+	CLK(sdi3_ed,	"sdi3",		NULL),
+	CLK(sdi1_ed,	"sdi1",		NULL),
+	CLK(msp2_ed,	"msp2",		NULL),
+	CLK(sdi4_ed,	"sdi4",		NULL),
+	CLK(pwl_ed,	"pwl",		NULL),
+	CLK(spi1_ed,	"spi1",		NULL),
+	CLK(spi2_ed,	"spi2",		NULL),
+	CLK(i2c3_ed,	"nmk-i2c.3",	NULL),
+
+	/* Peripheral Cluster #3 */
+	CLK(ssp1_ed,	"ssp1",		NULL),
+	CLK(ssp0_ed,	"ssp0",		NULL),
+
+	/* Peripheral Cluster #5 */
+	CLK(usb_ed,	"musb_hdrc.0",	"usb"),
+
+	/* Peripheral Cluster #6 */
+	CLK(dmc_ed,	"dmc",		NULL),
+	CLK(cryp1_ed,	"cryp1",	NULL),
+	CLK(rng_ed,	"rng",		NULL),
+
+	/* Peripheral Cluster #7 */
+	CLK(tzpc0_ed,	"tzpc0",	NULL),
+	CLK(mtu1_ed,	"mtu1",		NULL),
+	CLK(mtu0_ed,	"mtu0",		NULL),
+	CLK(wdg_ed,	"wdg",		NULL),
+	CLK(cfgreg_ed,	"cfgreg",	NULL),
+};
+
+static struct clk_lookup u8500_v1_clks[] = {
+	/* Peripheral Cluster #1 */
+	CLK(i2c4,	"nmk-i2c.4", 	NULL),
+	CLK(spi3_v1,	"spi3",		NULL),
+	CLK(msp1_v1,	"msp1",		NULL),
+
+	/* Peripheral Cluster #2 */
+	CLK(gpio1_v1,	"gpio.6",	NULL),
+	CLK(gpio1_v1,	"gpio.7",	NULL),
+	CLK(ssitx_v1,	"ssitx",	NULL),
+	CLK(ssirx_v1,	"ssirx",	NULL),
+	CLK(spi0_v1,	"spi0",		NULL),
+	CLK(sdi3_v1,	"sdi3",		NULL),
+	CLK(sdi1_v1,	"sdi1",		NULL),
+	CLK(msp2_v1,	"msp2",		NULL),
+	CLK(sdi4_v1,	"sdi4",		NULL),
+	CLK(pwl_v1,	"pwl",		NULL),
+	CLK(spi1_v1,	"spi1",		NULL),
+	CLK(spi2_v1,	"spi2",		NULL),
+	CLK(i2c3_v1,	"nmk-i2c.3",	NULL),
+
+	/* Peripheral Cluster #3 */
+	CLK(ssp1_v1,	"ssp1",		NULL),
+	CLK(ssp0_v1,	"ssp0",		NULL),
+
+	/* Peripheral Cluster #5 */
+	CLK(usb_v1,	"musb_hdrc.0",	"usb"),
+
+	/* Peripheral Cluster #6 */
+	CLK(mtu1_v1,	"mtu1",		NULL),
+	CLK(mtu0_v1,	"mtu0",		NULL),
+	CLK(cfgreg_v1,	"cfgreg",	NULL),
+	CLK(hash1,	"hash1",	NULL),
+	CLK(unipro_v1,	"unipro",	NULL),
+	CLK(rng_v1,	"rng",		NULL),
+
+	/* PRCMU level clock gating */
+
+	/* Bank 0 */
+	CLK(uniproclk,	"uniproclk",	NULL),
+	CLK(dsialtclk,	"dsialt",	NULL),
+
+	/* Bank 1 */
+	CLK(rngclk,	"rng",		NULL),
+	CLK(uiccclk,	"uicc",		NULL),
+};
+
+int __init clk_init(void)
 {
-	/* register the clock lookups */
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+	if (cpu_is_u8500ed()) {
+		clk_prcmu_ops.enable = clk_prcmu_ed_enable;
+		clk_prcmu_ops.disable = clk_prcmu_ed_disable;
+		clk_per6clk.rate = 100000000;
+	} else if (cpu_is_u5500()) {
+		/* Clock tree for U5500 not implemented yet */
+		clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
+		clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
+		clk_per6clk.rate = 26000000;
+	}
+
+	clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
+	if (cpu_is_u8500ed())
+		clkdev_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks));
+	else
+		clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
+
 	return 0;
 }
-arch_initcall(clk_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/clock.h linux-libre-2.6.35-gnu/arch/arm/mach-ux500/clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/clock.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,147 @@
+/*
+ *  Copyright (C) 2010 ST-Ericsson
+ *  Copyright (C) 2009 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * struct clkops - ux500 clock operations
+ * @enable:	function to enable the clock
+ * @disable:	function to disable the clock
+ * @get_rate:	function to get the current clock rate
+ *
+ * This structure contains function pointers to functions that will be used to
+ * control the clock.  All of these functions are optional.  If get_rate is
+ * NULL, the rate in the struct clk will be used.
+ */
+struct clkops {
+	void (*enable) (struct clk *);
+	void (*disable) (struct clk *);
+	unsigned long (*get_rate) (struct clk *);
+};
+
+/**
+ * struct clk - ux500 clock structure
+ * @ops:		pointer to clkops struct used to control this clock
+ * @name:		name, for debugging
+ * @enabled:		refcount. positive if enabled, zero if disabled
+ * @get_rate:		custom callback for getting the clock rate
+ * @data:		custom per-clock data for example for the get_rate
+ *			callback
+ * @rate:		fixed rate for clocks which don't implement
+ * 			ops->getrate
+ * @prcmu_cg_off:	address offset of the combined enable/disable register
+ * 			(used on u8500v1)
+ * @prcmu_cg_bit:	bit in the combined enable/disable register (used on
+ * 			u8500v1)
+ * @prcmu_cg_mgt:	address of the enable/disable register (used on
+ * 			u8500ed)
+ * @cluster:		peripheral cluster number
+ * @prcc_bus:		bit for the bus clock in the peripheral's CLKRST
+ * @prcc_kernel:	bit for the kernel clock in the peripheral's CLKRST.
+ * 			-1 if no kernel clock exists.
+ * @parent_cluster:	pointer to parent's cluster clk struct
+ * @parent_periph:	pointer to parent's peripheral clk struct
+ *
+ * Peripherals are organised into clusters, and each cluster has an associated
+ * bus clock.  Some peripherals also have a parent peripheral clock.
+ *
+ * In order to enable a clock for a peripheral, we need to enable:
+ * 	(1) the parent cluster (bus) clock at the PRCMU level
+ * 	(2) the parent peripheral clock (if any) at the PRCMU level
+ * 	(3) the peripheral's bus & kernel clock at the PRCC level
+ *
+ * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
+ * of the cluster and peripheral clocks, and hooking these as the parents of
+ * the individual peripheral clocks.
+ *
+ * (3) is handled by specifying the bits in the PRCC control registers required
+ * to enable these clocks and modifying them in the ->enable and
+ * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
+ *
+ * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
+ * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
+ * prcc, and parent pointers are only used for the PRCC-level clocks.
+ */
+struct clk {
+	const struct clkops	*ops;
+	const char 		*name;
+	unsigned int		enabled;
+	unsigned long		(*get_rate)(struct clk *);
+	void			*data;
+
+	unsigned long		rate;
+	struct list_head	list;
+
+	/* These three are only for PRCMU clks */
+
+	unsigned int		prcmu_cg_off;
+	unsigned int		prcmu_cg_bit;
+	unsigned int		prcmu_cg_mgt;
+
+	/* The rest are only for PRCC clks */
+
+	int			cluster;
+	unsigned int		prcc_bus;
+	unsigned int		prcc_kernel;
+
+	struct clk		*parent_cluster;
+	struct clk		*parent_periph;
+};
+
+#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg)		\
+struct clk clk_##_name = {					\
+		.name		= #_name,			\
+		.ops    	= &clk_prcmu_ops, 		\
+		.prcmu_cg_off	= _cg_off, 			\
+		.prcmu_cg_bit	= _cg_bit,			\
+		.prcmu_cg_mgt	= PRCM_##_reg##_MGT		\
+	}
+
+#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate)	\
+struct clk clk_##_name = {						\
+		.name		= #_name,				\
+		.ops    	= &clk_prcmu_ops, 			\
+		.prcmu_cg_off	= _cg_off, 				\
+		.prcmu_cg_bit	= _cg_bit,				\
+		.rate		= _rate,				\
+		.prcmu_cg_mgt	= PRCM_##_reg##_MGT			\
+	}
+
+#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk)	\
+struct clk clk_##_name = {						\
+		.name		= #_name,				\
+		.ops    	= &clk_prcc_ops, 			\
+		.cluster 	= _pclust,				\
+		.prcc_bus 	= _bus_en, 				\
+		.prcc_kernel 	= _kernel_en, 				\
+		.parent_cluster = &clk_per##_pclust##clk,		\
+		.parent_periph 	= _kernclk				\
+	}
+
+#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
+struct clk clk_##_name = {						\
+		.name		= #_name,				\
+		.ops		= &clk_prcc_ops,			\
+		.cluster	= _pclust,				\
+		.prcc_bus	= _bus_en,				\
+		.prcc_kernel	= _kernel_en,				\
+		.parent_cluster = &clk_per##_pclust##clk,		\
+		.parent_periph	= _kernclk,				\
+		.get_rate	= _callback,				\
+		.data		= (void *) _data			\
+	}
+
+
+#define CLK(_clk, _devname, _conname)			\
+	{						\
+		.clk	= &clk_##_clk,			\
+		.dev_id	= _devname,			\
+		.con_id = _conname,			\
+	}
+
+int __init clk_db8500_ed_fixup(void);
+int __init clk_init(void);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/cpu.c linux-libre-2.6.35-gnu/arch/arm/mach-ux500/cpu.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/cpu.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/cpu.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/localtimer.h>
+
+#include <plat/mtu.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#include <mach/devices.h>
+
+#include "clock.h"
+
+static struct map_desc ux500_io_desc[] __initdata = {
+	__IO_DEV_DESC(UX500_UART0_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_UART2_BASE, SZ_4K),
+
+	__IO_DEV_DESC(UX500_GIC_CPU_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_GIC_DIST_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_L2CC_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_TWD_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_SCU_BASE, SZ_4K),
+
+	__IO_DEV_DESC(UX500_CLKRST1_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_CLKRST2_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_CLKRST3_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_CLKRST5_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_CLKRST6_BASE, SZ_4K),
+
+	__IO_DEV_DESC(UX500_MTU0_BASE, SZ_4K),
+	__IO_DEV_DESC(UX500_MTU1_BASE, SZ_4K),
+
+	__IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K),
+};
+
+static struct amba_device *ux500_amba_devs[] __initdata = {
+	&ux500_pl031_device,
+};
+
+void __init ux500_map_io(void)
+{
+	iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc));
+}
+
+void __init ux500_init_devices(void)
+{
+	amba_add_devices(ux500_amba_devs, ARRAY_SIZE(ux500_amba_devs));
+}
+
+void __init ux500_init_irq(void)
+{
+	gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+
+	/*
+	 * Init clocks here so that they are available for system timer
+	 * initialization.
+	 */
+	clk_init();
+}
+
+#ifdef CONFIG_CACHE_L2X0
+static int ux500_l2x0_init(void)
+{
+	void __iomem *l2x0_base;
+
+	l2x0_base = __io_address(UX500_L2CC_BASE);
+
+	/* 64KB way size, 8 way associativity, force WA */
+	l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+
+	return 0;
+}
+early_initcall(ux500_l2x0_init);
+#endif
+
+static void __init ux500_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+	/* Setup the local timer base */
+	twd_base = __io_address(UX500_TWD_BASE);
+#endif
+	/* Setup the MTU base */
+	if (cpu_is_u8500ed())
+		mtu_base = __io_address(U8500_MTU0_BASE_ED);
+	else
+		mtu_base = __io_address(UX500_MTU0_BASE);
+
+	nmdk_timer_init();
+}
+
+struct sys_timer ux500_timer = {
+	.init	= ux500_timer_init,
+};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/cpu-db5500.c linux-libre-2.6.35-gnu/arch/arm/mach-ux500/cpu-db5500.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/cpu-db5500.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/cpu-db5500.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/devices.h>
+#include <mach/setup.h>
+
+static struct map_desc u5500_io_desc[] __initdata = {
+	__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
+};
+
+static struct platform_device *u5500_platform_devs[] __initdata = {
+	&u5500_gpio_devs[0],
+	&u5500_gpio_devs[1],
+	&u5500_gpio_devs[2],
+	&u5500_gpio_devs[3],
+	&u5500_gpio_devs[4],
+	&u5500_gpio_devs[5],
+	&u5500_gpio_devs[6],
+	&u5500_gpio_devs[7],
+};
+
+void __init u5500_map_io(void)
+{
+	ux500_map_io();
+
+	iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
+}
+
+void __init u5500_init_devices(void)
+{
+	ux500_init_devices();
+
+	platform_add_devices(u5500_platform_devs,
+			     ARRAY_SIZE(u5500_platform_devs));
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/cpu-db8500.c linux-libre-2.6.35-gnu/arch/arm/mach-ux500/cpu-db8500.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/cpu-db8500.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/cpu-db8500.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#include <mach/devices.h>
+
+static struct platform_device *platform_devs[] __initdata = {
+	&u8500_gpio_devs[0],
+	&u8500_gpio_devs[1],
+	&u8500_gpio_devs[2],
+	&u8500_gpio_devs[3],
+	&u8500_gpio_devs[4],
+	&u8500_gpio_devs[5],
+	&u8500_gpio_devs[6],
+	&u8500_gpio_devs[7],
+	&u8500_gpio_devs[8],
+	&u8500_dma40_device,
+};
+
+/* minimum static i/o mapping required to boot U8500 platforms */
+static struct map_desc u8500_io_desc[] __initdata = {
+	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
+};
+
+static struct map_desc u8500ed_io_desc[] __initdata = {
+	__IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K),
+	__IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K),
+};
+
+static struct map_desc u8500v1_io_desc[] __initdata = {
+	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+};
+
+void __init u8500_map_io(void)
+{
+	ux500_map_io();
+
+	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+
+	if (cpu_is_u8500ed())
+		iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc));
+	else
+		iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc));
+}
+
+/*
+ * This function is called from the board init
+ */
+void __init u8500_init_devices(void)
+{
+	ux500_init_devices();
+
+	if (cpu_is_u8500ed())
+		dma40_u8500ed_fixup();
+
+	/* Register the platform devices */
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+	return ;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/cpu-u8500.c linux-libre-2.6.35-gnu/arch/arm/mach-ux500/cpu-u8500.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/cpu-u8500.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/cpu-u8500.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2008-2009 ST-Ericsson
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-
-/* add any platform devices here - TODO */
-static struct platform_device *platform_devs[] __initdata = {
-	/* yet to be added, add i2c0, gpio.. */
-};
-
-#define __IO_DEV_DESC(x, sz)	{		\
-	.virtual	= IO_ADDRESS(x),	\
-	.pfn		= __phys_to_pfn(x),	\
-	.length		= sz,			\
-	.type		= MT_DEVICE,		\
-}
-
-/* minimum static i/o mapping required to boot U8500 platforms */
-static struct map_desc u8500_io_desc[] __initdata = {
-	__IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
-};
-
-void __init u8500_map_io(void)
-{
-	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
-}
-
-void __init u8500_init_irq(void)
-{
-	gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29);
-	gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
-}
-
-/*
- * This function is called from the board init
- */
-void __init u8500_init_devices(void)
-{
-	/* Register the platform devices */
-	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
-
-	return ;
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/devices.c linux-libre-2.6.35-gnu/arch/arm/mach-ux500/devices.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/devices.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/devices.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/amba/bus.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+struct amba_device ux500_pl031_device = {
+	.dev = {
+		.init_name = "pl031",
+	},
+	.res = {
+		.start	= UX500_RTC_BASE,
+		.end	= UX500_RTC_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq = {IRQ_RTC_RTT, NO_IRQ},
+};
+
+struct amba_device ux500_uart0_device = {
+	.dev = { .init_name = "uart0" },
+	__MEM_4K_RESOURCE(UX500_UART0_BASE),
+	.irq = {IRQ_UART0, NO_IRQ},
+};
+
+struct amba_device ux500_uart1_device = {
+	.dev = { .init_name = "uart1" },
+	__MEM_4K_RESOURCE(UX500_UART1_BASE),
+	.irq = {IRQ_UART1, NO_IRQ},
+};
+
+struct amba_device ux500_uart2_device = {
+	.dev = { .init_name = "uart2" },
+	__MEM_4K_RESOURCE(UX500_UART2_BASE),
+	.irq = {IRQ_UART2, NO_IRQ},
+};
+
+#define UX500_I2C_RESOURCES(id, size)				\
+static struct resource ux500_i2c##id##_resources[] = {		\
+	[0] = {							\
+		.start	= UX500_I2C##id##_BASE,			\
+		.end	= UX500_I2C##id##_BASE + size - 1,	\
+		.flags	= IORESOURCE_MEM,			\
+	},							\
+	[1] = {							\
+		.start	= IRQ_I2C##id,				\
+		.end	= IRQ_I2C##id,				\
+		.flags	= IORESOURCE_IRQ			\
+	}							\
+}
+
+UX500_I2C_RESOURCES(1, SZ_4K);
+UX500_I2C_RESOURCES(2, SZ_4K);
+UX500_I2C_RESOURCES(3, SZ_4K);
+
+#define UX500_I2C_PDEVICE(cid)					\
+struct platform_device ux500_i2c##cid##_device = {		\
+	.name		= "nmk-i2c",				\
+	.id		= cid,					\
+	.num_resources	= 2,					\
+	.resource	= ux500_i2c##cid##_resources,		\
+}
+
+UX500_I2C_PDEVICE(1);
+UX500_I2C_PDEVICE(2);
+UX500_I2C_PDEVICE(3);
+
+void __init amba_add_devices(struct amba_device *devs[], int num)
+{
+	int i;
+
+	for (i = 0; i < num; i++) {
+		struct amba_device *d = devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/devices-db5500.c linux-libre-2.6.35-gnu/arch/arm/mach-ux500/devices-db5500.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/devices-db5500.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/devices-db5500.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <mach/devices.h>
+
+static struct nmk_gpio_platform_data u5500_gpio_data[] = {
+	GPIO_DATA("GPIO-0-31", 0),
+	GPIO_DATA("GPIO-32-63", 32), /* 36..63 not routed to pin */
+	GPIO_DATA("GPIO-64-95", 64), /* 83..95 not routed to pin */
+	GPIO_DATA("GPIO-96-127", 96), /* 102..127 not routed to pin */
+	GPIO_DATA("GPIO-128-159", 128), /* 149..159 not routed to pin */
+	GPIO_DATA("GPIO-160-191", 160),
+	GPIO_DATA("GPIO-192-223", 192),
+	GPIO_DATA("GPIO-224-255", 224), /* 228..255 not routed to pin */
+};
+
+static struct resource u5500_gpio_resources[] = {
+	GPIO_RESOURCE(0),
+	GPIO_RESOURCE(1),
+	GPIO_RESOURCE(2),
+	GPIO_RESOURCE(3),
+	GPIO_RESOURCE(4),
+	GPIO_RESOURCE(5),
+	GPIO_RESOURCE(6),
+	GPIO_RESOURCE(7),
+};
+
+struct platform_device u5500_gpio_devs[] = {
+	GPIO_DEVICE(0),
+	GPIO_DEVICE(1),
+	GPIO_DEVICE(2),
+	GPIO_DEVICE(3),
+	GPIO_DEVICE(4),
+	GPIO_DEVICE(5),
+	GPIO_DEVICE(6),
+	GPIO_DEVICE(7),
+};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/devices-db8500.c linux-libre-2.6.35-gnu/arch/arm/mach-ux500/devices-db8500.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/devices-db8500.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/devices-db8500.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+
+#include <plat/ste_dma40.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+#include "ste-dma40-db8500.h"
+
+static struct nmk_gpio_platform_data u8500_gpio_data[] = {
+	GPIO_DATA("GPIO-0-31", 0),
+	GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */
+	GPIO_DATA("GPIO-64-95", 64),
+	GPIO_DATA("GPIO-96-127", 96), /* 98..127 not routed to pin */
+	GPIO_DATA("GPIO-128-159", 128),
+	GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */
+	GPIO_DATA("GPIO-192-223", 192),
+	GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */
+	GPIO_DATA("GPIO-256-288", 256), /* 268..288 not routed to pin */
+};
+
+static struct resource u8500_gpio_resources[] = {
+	GPIO_RESOURCE(0),
+	GPIO_RESOURCE(1),
+	GPIO_RESOURCE(2),
+	GPIO_RESOURCE(3),
+	GPIO_RESOURCE(4),
+	GPIO_RESOURCE(5),
+	GPIO_RESOURCE(6),
+	GPIO_RESOURCE(7),
+	GPIO_RESOURCE(8),
+};
+
+struct platform_device u8500_gpio_devs[] = {
+	GPIO_DEVICE(0),
+	GPIO_DEVICE(1),
+	GPIO_DEVICE(2),
+	GPIO_DEVICE(3),
+	GPIO_DEVICE(4),
+	GPIO_DEVICE(5),
+	GPIO_DEVICE(6),
+	GPIO_DEVICE(7),
+	GPIO_DEVICE(8),
+};
+
+struct amba_device u8500_ssp0_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+		.init_name = "ssp0",
+	},
+	.res = {
+		.start = U8500_SSP0_BASE,
+		.end   = U8500_SSP0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_SSP0, NO_IRQ },
+	/* ST-Ericsson modified id */
+	.periphid = SSP_PER_ID,
+};
+
+static struct resource u8500_i2c0_resources[] = {
+	[0] = {
+		.start	= U8500_I2C0_BASE,
+		.end	= U8500_I2C0_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_I2C0,
+		.end	= IRQ_I2C0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device u8500_i2c0_device = {
+	.name		= "nmk-i2c",
+	.id		= 0,
+	.resource	= u8500_i2c0_resources,
+	.num_resources	= ARRAY_SIZE(u8500_i2c0_resources),
+};
+
+static struct resource u8500_i2c4_resources[] = {
+	[0] = {
+		.start	= U8500_I2C4_BASE,
+		.end	= U8500_I2C4_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_I2C4,
+		.end	= IRQ_I2C4,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device u8500_i2c4_device = {
+	.name		= "nmk-i2c",
+	.id		= 4,
+	.resource	= u8500_i2c4_resources,
+	.num_resources	= ARRAY_SIZE(u8500_i2c4_resources),
+};
+
+static struct resource dma40_resources[] = {
+	[0] = {
+		.start = U8500_DMA_BASE,
+		.end = U8500_DMA_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+		.name = "base",
+	},
+	[1] = {
+		.start = U8500_DMA_LCPA_BASE,
+		.end = U8500_DMA_LCPA_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+		.name = "lcpa",
+	},
+	[2] = {
+		.start = U8500_DMA_LCLA_BASE,
+		.end = U8500_DMA_LCLA_BASE + 16 * 1024 - 1,
+		.flags = IORESOURCE_MEM,
+		.name = "lcla",
+	},
+	[3] = {
+		.start = IRQ_DMA,
+		.end = IRQ_DMA,
+		.flags = IORESOURCE_IRQ}
+};
+
+/* Default configuration for physcial memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+	.channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE |
+			 STEDMA40_LOW_PRIORITY_CHANNEL |
+			 STEDMA40_PCHAN_BASIC_MODE),
+	.dir = STEDMA40_MEM_TO_MEM,
+
+	.src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.src_info.psize = STEDMA40_PSIZE_PHY_1,
+
+	.dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
+
+};
+/* Default configuration for logical memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+	.channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE |
+			 STEDMA40_LOW_PRIORITY_CHANNEL |
+			 STEDMA40_LCHAN_SRC_LOG_DST_LOG |
+			 STEDMA40_NO_TIM_FOR_LINK),
+	.dir = STEDMA40_MEM_TO_MEM,
+
+	.src_info.endianess = STEDMA40_LITTLE_ENDIAN,
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.src_info.psize = STEDMA40_PSIZE_LOG_1,
+
+	.dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
+
+};
+
+/*
+ * Mapping between destination event lines and physical device address.
+ * The event line is tied to a device and therefor the address is constant.
+ */
+static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV];
+
+/* Mapping between source event lines and physical device address */
+static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV];
+
+/* Reserved event lines for memcpy only */
+static int dma40_memcpy_event[] = {
+	STEDMA40_MEMCPY_TX_1,
+	STEDMA40_MEMCPY_TX_2,
+	STEDMA40_MEMCPY_TX_3,
+	STEDMA40_MEMCPY_TX_4,
+};
+
+static struct stedma40_platform_data dma40_plat_data = {
+	.dev_len = STEDMA40_NR_DEV,
+	.dev_rx = dma40_rx_map,
+	.dev_tx = dma40_tx_map,
+	.memcpy = dma40_memcpy_event,
+	.memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
+	.memcpy_conf_phy = &dma40_memcpy_conf_phy,
+	.memcpy_conf_log = &dma40_memcpy_conf_log,
+	.llis_per_log = 8,
+};
+
+struct platform_device u8500_dma40_device = {
+	.dev = {
+		.platform_data = &dma40_plat_data,
+	},
+	.name = "dma40",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(dma40_resources),
+	.resource = dma40_resources
+};
+
+void dma40_u8500ed_fixup(void)
+{
+	dma40_plat_data.memcpy = NULL;
+	dma40_plat_data.memcpy_len = 0;
+	dma40_resources[0].start = U8500_DMA_BASE_ED;
+	dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/db5500-regs.h linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/db5500-regs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/db5500-regs.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/db5500-regs.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_DB5500_REGS_H
+#define __MACH_DB5500_REGS_H
+
+#define U5500_PER1_BASE		0xA0020000
+#define U5500_PER2_BASE		0xA0010000
+#define U5500_PER3_BASE		0x80140000
+#define U5500_PER4_BASE		0x80150000
+#define U5500_PER5_BASE		0x80100000
+#define U5500_PER6_BASE		0x80120000
+
+#define U5500_GIC_DIST_BASE	0xA0411000
+#define U5500_GIC_CPU_BASE	0xA0410100
+#define U5500_DMA_BASE		0x90030000
+#define U5500_MCDE_BASE		0xA0400000
+#define U5500_MODEM_BASE	0xB0000000
+#define U5500_L2CC_BASE		0xA0412000
+#define U5500_SCU_BASE		0xA0410000
+#define U5500_DSI1_BASE		0xA0401000
+#define U5500_DSI2_BASE		0xA0402000
+#define U5500_SIA_BASE		0xA0100000
+#define U5500_SVA_BASE		0x80200000
+#define U5500_HSEM_BASE		0xA0000000
+#define U5500_NAND0_BASE	0x60000000
+#define U5500_NAND1_BASE	0x70000000
+#define U5500_TWD_BASE		0xa0410600
+#define U5500_B2R2_BASE		0xa0200000
+
+#define U5500_FSMC_BASE		(U5500_PER1_BASE + 0x0000)
+#define U5500_SDI0_BASE		(U5500_PER1_BASE + 0x1000)
+#define U5500_SDI2_BASE		(U5500_PER1_BASE + 0x2000)
+#define U5500_UART0_BASE	(U5500_PER1_BASE + 0x3000)
+#define U5500_I2C1_BASE		(U5500_PER1_BASE + 0x4000)
+#define U5500_MSP0_BASE		(U5500_PER1_BASE + 0x5000)
+#define U5500_GPIO0_BASE	(U5500_PER1_BASE + 0xE000)
+#define U5500_CLKRST1_BASE	(U5500_PER1_BASE + 0xF000)
+
+#define U5500_USBOTG_BASE	(U5500_PER2_BASE + 0x0000)
+#define U5500_GPIO1_BASE	(U5500_PER2_BASE + 0xE000)
+#define U5500_CLKRST2_BASE	(U5500_PER2_BASE + 0xF000)
+
+#define U5500_KEYPAD_BASE	(U5500_PER3_BASE + 0x0000)
+#define U5500_PWM_BASE		(U5500_PER3_BASE + 0x1000)
+#define U5500_GPIO3_BASE	(U5500_PER3_BASE + 0xE000)
+#define U5500_CLKRST3_BASE	(U5500_PER3_BASE + 0xF000)
+
+#define U5500_BACKUPRAM0_BASE	(U5500_PER4_BASE + 0x0000)
+#define U5500_BACKUPRAM1_BASE	(U5500_PER4_BASE + 0x1000)
+#define U5500_RTT0_BASE		(U5500_PER4_BASE + 0x2000)
+#define U5500_RTT1_BASE		(U5500_PER4_BASE + 0x3000)
+#define U5500_RTC_BASE		(U5500_PER4_BASE + 0x4000)
+#define U5500_SCR_BASE		(U5500_PER4_BASE + 0x5000)
+#define U5500_DMC_BASE		(U5500_PER4_BASE + 0x6000)
+#define U5500_PRCMU_BASE	(U5500_PER4_BASE + 0x7000)
+#define U5500_MSP1_BASE		(U5500_PER4_BASE + 0x9000)
+#define U5500_GPIO2_BASE	(U5500_PER4_BASE + 0xA000)
+#define U5500_CDETECT_BASE	(U5500_PER4_BASE + 0xF000)
+
+#define U5500_SPI0_BASE		(U5500_PER5_BASE + 0x0000)
+#define U5500_SPI1_BASE		(U5500_PER5_BASE + 0x1000)
+#define U5500_SPI2_BASE		(U5500_PER5_BASE + 0x2000)
+#define U5500_SPI3_BASE		(U5500_PER5_BASE + 0x3000)
+#define U5500_UART1_BASE	(U5500_PER5_BASE + 0x4000)
+#define U5500_UART2_BASE	(U5500_PER5_BASE + 0x5000)
+#define U5500_UART3_BASE	(U5500_PER5_BASE + 0x6000)
+#define U5500_SDI1_BASE		(U5500_PER5_BASE + 0x7000)
+#define U5500_SDI3_BASE		(U5500_PER5_BASE + 0x8000)
+#define U5500_SDI4_BASE		(U5500_PER5_BASE + 0x9000)
+#define U5500_I2C2_BASE		(U5500_PER5_BASE + 0xA000)
+#define U5500_I2C3_BASE		(U5500_PER5_BASE + 0xB000)
+#define U5500_MSP2_BASE		(U5500_PER5_BASE + 0xC000)
+#define U5500_IRDA_BASE		(U5500_PER5_BASE + 0xD000)
+#define U5500_IRRC_BASE		(U5500_PER5_BASE + 0x10000)
+#define U5500_GPIO4_BASE	(U5500_PER5_BASE + 0x1E000)
+#define U5500_CLKRST5_BASE	(U5500_PER5_BASE + 0x1F000)
+
+#define U5500_RNG_BASE		(U5500_PER6_BASE + 0x0000)
+#define U5500_HASH0_BASE	(U5500_PER6_BASE + 0x1000)
+#define U5500_HASH1_BASE	(U5500_PER6_BASE + 0x2000)
+#define U5500_PKA_BASE		(U5500_PER6_BASE + 0x4000)
+#define U5500_PKAM_BASE		(U5500_PER6_BASE + 0x5000)
+#define U5500_MTU0_BASE		(U5500_PER6_BASE + 0x6000)
+#define U5500_MTU1_BASE		(U5500_PER6_BASE + 0x7000)
+#define U5500_CR_BASE		(U5500_PER6_BASE + 0x8000)
+#define U5500_CRYP0_BASE	(U5500_PER6_BASE + 0xA000)
+#define U5500_CRYP1_BASE	(U5500_PER6_BASE + 0xB000)
+#define U5500_CLKRST6_BASE	(U5500_PER6_BASE + 0xF000)
+
+#define U5500_GPIOBANK0_BASE	U5500_GPIO0_BASE
+#define U5500_GPIOBANK1_BASE	(U5500_GPIO0_BASE + 0x80)
+#define U5500_GPIOBANK2_BASE	U5500_GPIO1_BASE
+#define U5500_GPIOBANK3_BASE	U5500_GPIO2_BASE
+#define U5500_GPIOBANK4_BASE	U5500_GPIO3_BASE
+#define U5500_GPIOBANK5_BASE	U5500_GPIO4_BASE
+#define U5500_GPIOBANK6_BASE	(U5500_GPIO4_BASE + 0x80)
+#define U5500_GPIOBANK7_BASE	(U5500_GPIO4_BASE + 0x100)
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/db8500-regs.h linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/db8500-regs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/db8500-regs.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/db8500-regs.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_DB8500_REGS_H
+#define __MACH_DB8500_REGS_H
+
+/* Base address and bank offsets for ESRAM */
+#define U8500_ESRAM_BASE	0x40000000
+#define U8500_ESRAM_BANK_SIZE	0x00020000
+#define U8500_ESRAM_BANK0	U8500_ESRAM_BASE
+#define U8500_ESRAM_BANK1	(U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK2	(U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK3	(U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK4	(U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
+/* Use bank 4 for DMA LCLA and LCPA */
+#define U8500_DMA_LCLA_BASE	U8500_ESRAM_BANK4
+#define U8500_DMA_LCPA_BASE	(U8500_ESRAM_BANK4 + 0x4000)
+
+#define U8500_PER3_BASE		0x80000000
+#define U8500_STM_BASE		0x80100000
+#define U8500_STM_REG_BASE	(U8500_STM_BASE + 0xF000)
+#define U8500_PER2_BASE		0x80110000
+#define U8500_PER1_BASE		0x80120000
+#define U8500_B2R2_BASE		0x80130000
+#define U8500_HSEM_BASE		0x80140000
+#define U8500_PER4_BASE		0x80150000
+#define U8500_ICN_BASE		0x81000000
+
+#define U8500_BOOT_ROM_BASE	0x90000000
+/* ASIC ID is at 0xff4 offset within this region */
+#define U8500_ASIC_ID_BASE	0x9001F000
+
+#define U8500_PER6_BASE		0xa03c0000
+#define U8500_PER5_BASE		0xa03e0000
+#define U8500_PER7_BASE_ED	0xa03d0000
+
+#define U8500_SVA_BASE		0xa0100000
+#define U8500_SIA_BASE		0xa0200000
+
+#define U8500_SGA_BASE		0xa0300000
+#define U8500_MCDE_BASE		0xa0350000
+#define U8500_DMA_BASE_ED	0xa0362000
+#define U8500_DMA_BASE		0x801C0000	/* v1 */
+
+#define U8500_SBAG_BASE		0xa0390000
+
+#define U8500_SCU_BASE		0xa0410000
+#define U8500_GIC_CPU_BASE	0xa0410100
+#define U8500_TWD_BASE		0xa0410600
+#define U8500_GIC_DIST_BASE	0xa0411000
+#define U8500_L2CC_BASE		0xa0412000
+
+#define U8500_MODEM_I2C		0xb7e02000
+
+#define U8500_GPIO0_BASE	(U8500_PER1_BASE + 0xE000)
+#define U8500_GPIO1_BASE	(U8500_PER3_BASE + 0xE000)
+#define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xE000)
+#define U8500_GPIO3_BASE	(U8500_PER5_BASE + 0x1E000)
+
+/* per7 base addressess */
+#define U8500_CR_BASE_ED	(U8500_PER7_BASE_ED + 0x8000)
+#define U8500_MTU0_BASE_ED	(U8500_PER7_BASE_ED + 0xa000)
+#define U8500_MTU1_BASE_ED	(U8500_PER7_BASE_ED + 0xb000)
+#define U8500_TZPC0_BASE_ED	(U8500_PER7_BASE_ED + 0xc000)
+#define U8500_CLKRST7_BASE_ED	(U8500_PER7_BASE_ED + 0xf000)
+
+#define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
+
+/* per6 base addressess */
+#define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
+#define U8500_MTU0_BASE		(U8500_PER6_BASE + 0x6000) /* v1 */
+#define U8500_MTU1_BASE		(U8500_PER6_BASE + 0x7000) /* v1 */
+#define U8500_CR_BASE		(U8500_PER6_BASE + 0x8000) /* v1 */
+#define U8500_CRYPTO0_BASE	(U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE	(U8500_PER6_BASE + 0xf000)
+
+/* per5 base addressess */
+#define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
+#define U8500_CLKRST5_BASE	(U8500_PER5_BASE + 0x1f000)
+
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x00000)
+#define U8500_BACKUPRAM1_BASE	(U8500_PER4_BASE + 0x01000)
+#define U8500_RTT0_BASE		(U8500_PER4_BASE + 0x02000)
+#define U8500_RTT1_BASE		(U8500_PER4_BASE + 0x03000)
+#define U8500_RTC_BASE		(U8500_PER4_BASE + 0x04000)
+#define U8500_SCR_BASE		(U8500_PER4_BASE + 0x05000)
+#define U8500_DMC_BASE		(U8500_PER4_BASE + 0x06000)
+#define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
+#define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x0f000)
+
+/* per3 base addresses */
+#define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE		(U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE		(U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE		(U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE		(U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE		(U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
+#define U8500_CLKRST3_BASE	(U8500_PER3_BASE + 0xf000)
+
+/* per2 base addressess */
+#define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE		(U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE		(U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE		(U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE		(U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE		(U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE		(U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE		(U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE		(U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE		(U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE		(U8500_PER2_BASE + 0xc000)
+#define U8500_CLKRST2_BASE	(U8500_PER2_BASE + 0xf000)
+
+/* per1 base addresses */
+#define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
+#define U8500_I2C4_BASE		(U8500_PER1_BASE + 0xa000)
+#define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xb000)
+#define U8500_CLKRST1_BASE	(U8500_PER1_BASE + 0xf000)
+
+#define U8500_SHRM_GOP_INTERRUPT_BASE	0xB7C00040
+
+#define U8500_GPIOBANK0_BASE	U8500_GPIO0_BASE
+#define U8500_GPIOBANK1_BASE	(U8500_GPIO0_BASE + 0x80)
+#define U8500_GPIOBANK2_BASE	U8500_GPIO1_BASE
+#define U8500_GPIOBANK3_BASE	(U8500_GPIO1_BASE + 0x80)
+#define U8500_GPIOBANK4_BASE	(U8500_GPIO1_BASE + 0x100)
+#define U8500_GPIOBANK5_BASE	(U8500_GPIO1_BASE + 0x180)
+#define U8500_GPIOBANK6_BASE	U8500_GPIO2_BASE
+#define U8500_GPIOBANK7_BASE	(U8500_GPIO2_BASE + 0x80)
+#define U8500_GPIOBANK8_BASE	U8500_GPIO3_BASE
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/debug-macro.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -10,11 +10,19 @@
  */
 #include <mach/hardware.h>
 
+#if CONFIG_UX500_DEBUG_UART > 2
+#error Invalid Ux500 debug UART
+#endif
+
+#define __UX500_UART(n)	UX500_UART##n##_BASE
+#define UX500_UART(n)	__UX500_UART(n)
+#define UART_BASE	UX500_UART(CONFIG_UX500_DEBUG_UART)
+
 	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =U8500_UART2_BASE			@ no, physical address
-	ldrne	\rx, =IO_ADDRESS(U8500_UART2_BASE)	@ yes, virtual address
+	ldreq	\rx, =UART_BASE				@ no, physical address
+	ldrne	\rx, =IO_ADDRESS(UART_BASE)		@ yes, virtual address
 	.endm
 
 #include <asm/hardware/debug-pl01x.S>
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/devices.h linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/devices.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/devices.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/devices.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __ASM_ARCH_DEVICES_H__
+#define __ASM_ARCH_DEVICES_H__
+
+struct platform_device;
+struct amba_device;
+
+extern struct platform_device u5500_gpio_devs[];
+extern struct platform_device u8500_gpio_devs[];
+
+extern struct amba_device ux500_pl031_device;
+extern struct amba_device u8500_ssp0_device;
+extern struct amba_device ux500_uart0_device;
+extern struct amba_device ux500_uart1_device;
+extern struct amba_device ux500_uart2_device;
+
+extern struct platform_device ux500_i2c1_device;
+extern struct platform_device ux500_i2c2_device;
+extern struct platform_device ux500_i2c3_device;
+
+extern struct platform_device u8500_i2c0_device;
+extern struct platform_device u8500_i2c4_device;
+extern struct platform_device u8500_dma40_device;
+
+void dma40_u8500ed_fixup(void);
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/entry-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/entry-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/entry-macro.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/entry-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -17,7 +17,7 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
-		ldr     \base, =IO_ADDRESS(U8500_GIC_CPU_BASE)
+		ldr     \base, =IO_ADDRESS(UX500_GIC_CPU_BASE)
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/gpio.h linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/gpio.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,50 @@
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+/*
+ * 288 (#267 is the highest one actually hooked up) onchip GPIOs, plus enough
+ * room for a couple of GPIO expanders.
+ */
+#define ARCH_NR_GPIOS	350
+
+#include <plat/gpio.h>
+
+#define __GPIO_RESOURCE(soc, block)					\
+	{								\
+		.start	= soc##_GPIOBANK##block##_BASE,			\
+		.end	= soc##_GPIOBANK##block##_BASE + 127,		\
+		.flags	= IORESOURCE_MEM,				\
+	},								\
+	{								\
+		.start	= IRQ_GPIO##block,				\
+		.end	= IRQ_GPIO##block,				\
+		.flags	= IORESOURCE_IRQ,				\
+	}
+
+#define __GPIO_DEVICE(soc, block)					\
+	{								\
+		.name		= "gpio",				\
+		.id		= block,				\
+		.num_resources	= 2,					\
+		.resource	= &soc##_gpio_resources[block * 2],	\
+		.dev = {						\
+			.platform_data = &soc##_gpio_data[block],	\
+		},							\
+	}
+
+#define GPIO_DATA(_name, first)						\
+	{								\
+		.name		= _name,				\
+		.first_gpio	= first,				\
+		.first_irq	= NOMADIK_GPIO_TO_IRQ(first),		\
+	}
+
+#ifdef CONFIG_UX500_SOC_DB8500
+#define GPIO_RESOURCE(block)	__GPIO_RESOURCE(U8500, block)
+#define GPIO_DEVICE(block)	__GPIO_DEVICE(u8500, block)
+#elif defined(CONFIG_UX500_SOC_DB5500)
+#define GPIO_RESOURCE(block)	__GPIO_RESOURCE(U5500, block)
+#define GPIO_DEVICE(block)	__GPIO_DEVICE(u5500, block)
+#endif
+
+#endif /* __ASM_ARCH_GPIO_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/hardware.h linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/hardware.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/hardware.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/hardware.h	2010-08-01 18:11:14.000000000 -0400
@@ -23,109 +23,106 @@
 
 /* typesafe io address */
 #define __io_address(n)		__io(IO_ADDRESS(n))
+/* used by some plat-nomadik code */
+#define io_p2v(n)		__io_address(n)
 
-/*
- * Base address definitions for U8500 Onchip IPs. All the
- * peripherals are contained in a single 1 Mbyte region, with
- * AHB peripherals at the bottom and APB peripherals at the
- * top of the region. PER stands for PERIPHERAL region which
- * itself divided into sub regions.
- */
-#define U8500_PER3_BASE		0x80000000
-#define U8500_PER2_BASE		0x80110000
-#define U8500_PER1_BASE		0x80120000
-#define U8500_PER4_BASE		0x80150000
+#include <mach/db8500-regs.h>
+#include <mach/db5500-regs.h>
 
-#define U8500_PER6_BASE		0xa03c0000
-#define U8500_PER5_BASE		0xa03e0000
-#define U8500_PER7_BASE		0xa03d0000
+#ifdef CONFIG_UX500_SOC_DB8500
+#define UX500(periph)		U8500_##periph##_BASE
+#elif defined(CONFIG_UX500_SOC_DB5500)
+#define UX500(periph)		U5500_##periph##_BASE
+#endif
 
-#define U8500_SVA_BASE		0xa0100000
-#define U8500_SIA_BASE		0xa0200000
+#define UX500_BACKUPRAM0_BASE	UX500(BACKUPRAM0)
+#define UX500_BACKUPRAM1_BASE	UX500(BACKUPRAM1)
+#define UX500_B2R2_BASE		UX500(B2R2)
 
-#define U8500_SGA_BASE		0xa0300000
-#define U8500_MCDE_BASE		0xa0350000
-#define U8500_DMA_BASE		0xa0362000
+#define UX500_CLKRST1_BASE	UX500(CLKRST1)
+#define UX500_CLKRST2_BASE	UX500(CLKRST2)
+#define UX500_CLKRST3_BASE	UX500(CLKRST3)
+#define UX500_CLKRST5_BASE	UX500(CLKRST5)
+#define UX500_CLKRST6_BASE	UX500(CLKRST6)
 
-#define U8500_SCU_BASE		0xa0410000
-#define U8500_GIC_CPU_BASE	0xa0410100
-#define U8500_TWD_BASE		0xa0410600
-#define U8500_GIC_DIST_BASE	0xa0411000
-#define U8500_L2CC_BASE		0xa0412000
+#define UX500_DMA_BASE		UX500(DMA)
+#define UX500_FSMC_BASE		UX500(FSMC)
 
-#define U8500_TWD_SIZE		0x100
+#define UX500_GIC_CPU_BASE	UX500(GIC_CPU)
+#define UX500_GIC_DIST_BASE	UX500(GIC_DIST)
 
-/* per7 base addressess */
-#define U8500_CR_BASE		(U8500_PER7_BASE + 0x8000)
-#define U8500_MTU0_BASE		(U8500_PER7_BASE + 0xa000)
-#define U8500_MTU1_BASE		(U8500_PER7_BASE + 0xb000)
-#define U8500_TZPC0_BASE	(U8500_PER7_BASE + 0xc000)
-#define U8500_CLKRST7_BASE	(U8500_PER7_BASE + 0xf000)
+#define UX500_I2C1_BASE		UX500(I2C1)
+#define UX500_I2C2_BASE		UX500(I2C2)
+#define UX500_I2C3_BASE		UX500(I2C3)
 
-/* per6 base addressess */
-#define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
-#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x1000)
-#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
-#define U8500_CRYPTO0_BASE	(U8500_PER6_BASE + 0xa000)
-#define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
-#define U8500_CLKRST6_BASE	(U8500_PER6_BASE + 0xf000)
+#define UX500_L2CC_BASE		UX500(L2CC)
+#define UX500_MCDE_BASE		UX500(MCDE)
+#define UX500_MTU0_BASE		UX500(MTU0)
+#define UX500_MTU1_BASE		UX500(MTU1)
+#define UX500_PRCMU_BASE	UX500(PRCMU)
 
-/* per5 base addressess */
-#define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
-#define U8500_GPIO5_BASE	(U8500_PER5_BASE + 0x1e000)
-#define U8500_CLKRST5_BASE	(U8500_PER5_BASE + 0x1f000)
+#define UX500_RNG_BASE		UX500(RNG)
+#define UX500_RTC_BASE		UX500(RTC)
 
-/* per4 base addressess */
-#define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x0000)
-#define U8500_BACKUPRAM1_BASE	(U8500_PER4_BASE + 0x1000)
-#define U8500_RTT0_BASE		(U8500_PER4_BASE + 0x2000)
-#define U8500_RTT1_BASE		(U8500_PER4_BASE + 0x3000)
-#define U8500_RTC_BASE		(U8500_PER4_BASE + 0x4000)
-#define U8500_SCR_BASE		(U8500_PER4_BASE + 0x5000)
-#define U8500_DMC_BASE		(U8500_PER4_BASE + 0x6000)
-#define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x7000)
+#define UX500_SCU_BASE		UX500(SCU)
 
-/* per3 base addressess */
-#define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
-#define U8500_SSP0_BASE		(U8500_PER3_BASE + 0x2000)
-#define U8500_SSP1_BASE		(U8500_PER3_BASE + 0x3000)
-#define U8500_I2C0_BASE		(U8500_PER3_BASE + 0x4000)
-#define U8500_SDI2_BASE		(U8500_PER3_BASE + 0x5000)
-#define U8500_SKE_BASE		(U8500_PER3_BASE + 0x6000)
-#define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
-#define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
-#define U8500_GPIO3_BASE	(U8500_PER3_BASE + 0xe000)
-#define U8500_CLKRST3_BASE	(U8500_PER3_BASE + 0xf000)
+#define UX500_SDI0_BASE		UX500(SDI0)
+#define UX500_SDI1_BASE		UX500(SDI1)
+#define UX500_SDI2_BASE		UX500(SDI2)
+#define UX500_SDI3_BASE		UX500(SDI3)
+#define UX500_SDI4_BASE		UX500(SDI4)
 
-/* per2 base addressess */
-#define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
-#define U8500_SPI2_BASE		(U8500_PER2_BASE + 0x1000)
-#define U8500_SPI1_BASE		(U8500_PER2_BASE + 0x2000)
-#define U8500_PWL_BASE		(U8500_PER2_BASE + 0x3000)
-#define U8500_SDI4_BASE		(U8500_PER2_BASE + 0x4000)
-#define U8500_MSP2_BASE		(U8500_PER2_BASE + 0x7000)
-#define U8500_SDI1_BASE		(U8500_PER2_BASE + 0x8000)
-#define U8500_SDI3_BASE		(U8500_PER2_BASE + 0x9000)
-#define U8500_SPI0_BASE		(U8500_PER2_BASE + 0xa000)
-#define U8500_HSIR_BASE		(U8500_PER2_BASE + 0xb000)
-#define U8500_HSIT_BASE		(U8500_PER2_BASE + 0xc000)
-#define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xe000)
-#define U8500_CLKRST2_BASE	(U8500_PER2_BASE + 0xf000)
+#define UX500_SPI0_BASE		UX500(SPI0)
+#define UX500_SPI1_BASE		UX500(SPI1)
+#define UX500_SPI2_BASE		UX500(SPI2)
+#define UX500_SPI3_BASE		UX500(SPI3)
 
-/* per1 base addresses */
-#define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
-#define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
-#define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
-#define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
-#define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
-#define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
-#define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
-#define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
-#define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xa000)
-#define U8500_GPIO1_BASE	(U8500_PER1_BASE + 0xe000)
-#define U8500_CLKRST1_BASE	(U8500_PER1_BASE + 0xf000)
+#define UX500_SIA_BASE		UX500(SIA)
+#define UX500_SVA_BASE		UX500(SVA)
+
+#define UX500_TWD_BASE		UX500(TWD)
+
+#define UX500_UART0_BASE	UX500(UART0)
+#define UX500_UART1_BASE	UX500(UART1)
+#define UX500_UART2_BASE	UX500(UART2)
+
+#define UX500_USBOTG_BASE	UX500(USBOTG)
 
 /* ST-Ericsson modified pl022 id */
 #define SSP_PER_ID		0x01080022
 
+#ifndef __ASSEMBLY__
+
+#include <asm/cputype.h>
+
+static inline bool cpu_is_u8500(void)
+{
+#ifdef CONFIG_UX500_SOC_DB8500
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+static inline bool cpu_is_u8500ed(void)
+{
+	return cpu_is_u8500() && (read_cpuid_id() & 15) == 0;
+}
+
+static inline bool cpu_is_u8500v1(void)
+{
+	return cpu_is_u8500() && (read_cpuid_id() & 15) == 1;
+}
+
+static inline bool cpu_is_u5500(void)
+{
+#ifdef CONFIG_UX500_SOC_DB5500
+	return 1;
+#else
+	return 0;
+#endif
+}
+
+#endif
+
 #endif				/* __MACH_HARDWARE_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -42,6 +42,7 @@
 #define IRQ_AB4500		(IRQ_SHPI_START + 40)
 #define IRQ_DISP		(IRQ_SHPI_START + 48)
 #define IRQ_SiPI3		(IRQ_SHPI_START + 49)
+#define IRQ_I2C4		(IRQ_SHPI_START + 51)
 #define IRQ_SSP1		(IRQ_SHPI_START + 52)
 #define IRQ_I2C2		(IRQ_SHPI_START + 55)
 #define IRQ_SDMMC0		(IRQ_SHPI_START + 60)
@@ -66,6 +67,12 @@
 /* There are 128 shared peripheral interrupts assigned to
  * INTID[160:32]. The first 32 interrupts are reserved.
  */
-#define NR_IRQS			161
+#define U8500_SOC_NR_IRQS		161
+
+/* After chip-specific IRQ numbers we have the GPIO ones */
+#define NOMADIK_NR_GPIO			288
+#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + U8500_SOC_NR_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - U8500_SOC_NR_IRQS)
+#define NR_IRQS				NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
 
 #endif /*ASM_ARCH_IRQS_H*/
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/setup.h linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/setup.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/setup.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/setup.h	2010-08-01 18:11:14.000000000 -0400
@@ -14,10 +14,28 @@
 #include <asm/mach/time.h>
 #include <linux/init.h>
 
-extern void u8500_map_io(void);
-extern void u8500_init_devices(void);
-extern void u8500_init_irq(void);
+extern void __init ux500_map_io(void);
+extern void __init u5500_map_io(void);
+extern void __init u8500_map_io(void);
+
+extern void __init ux500_init_devices(void);
+extern void __init u5500_init_devices(void);
+extern void __init u8500_init_devices(void);
+
+extern void __init ux500_init_irq(void);
 /* We re-use nomadik_timer for this platform */
 extern void nmdk_timer_init(void);
 
+extern void __init amba_add_devices(struct amba_device *devs[], int num);
+
+struct sys_timer;
+extern struct sys_timer ux500_timer;
+
+#define __IO_DEV_DESC(x, sz)	{		\
+	.virtual	= IO_ADDRESS(x),	\
+	.pfn		= __phys_to_pfn(x),	\
+	.length		= sz,			\
+	.type		= MT_DEVICE,		\
+}
+
 #endif /*  __ASM_ARCH_SETUP_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/uncompress.h linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/uncompress.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/include/mach/uncompress.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/include/mach/uncompress.h	2010-08-01 18:11:14.000000000 -0400
@@ -30,22 +30,22 @@
 static void putc(const char c)
 {
 	/* Do nothing if the UART is not enabled. */
-	if (!(readb(U8500_UART_CR) & 0x1))
+	if (!(__raw_readb(U8500_UART_CR) & 0x1))
 		return;
 
 	if (c == '\n')
 		putc('\r');
 
-	while (readb(U8500_UART_FR) & (1 << 5))
+	while (__raw_readb(U8500_UART_FR) & (1 << 5))
 		barrier();
-	writeb(c, U8500_UART_DR);
+	__raw_writeb(c, U8500_UART_DR);
 }
 
 static void flush(void)
 {
-	if (!(readb(U8500_UART_CR) & 0x1))
+	if (!(__raw_readb(U8500_UART_CR) & 0x1))
 		return;
-	while (readb(U8500_UART_FR) & (1 << 3))
+	while (__raw_readb(U8500_UART_FR) & (1 << 3))
 		barrier();
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-ux500/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,15 +1,42 @@
-menu "ST-Ericsson platform type"
-	depends on ARCH_U8500
-
-comment "ST-Ericsson Multicore Mobile Platforms"
+if ARCH_U8500
 
-config MACH_U8500_MOP
-	bool "U8500 Early Development platform"
+config UX500_SOC_COMMON
+	bool
 	default y
 	select ARM_GIC
 	select HAS_MTU
+	select NOMADIK_GPIO
+
+config UX500_SOC_DB8500
+	bool
+
+config UX500_SOC_DB5500
+	bool
+
+choice
+	prompt "Ux500 target platform"
+	default MACH_U8500_MOP
+
+config MACH_U8500_MOP
+	bool "U8500 Development platform"
+	select UX500_SOC_DB8500
 	help
 	  Include support for mop500 development platform
 	  based on U8500 architecture. The platform is based
 	  on early drop silicon version of 8500.
-endmenu
+
+config MACH_U5500
+	bool "U5500 Development platform"
+	select UX500_SOC_DB5500
+	help
+	  Include support for the U5500 development platform.
+endchoice
+
+config UX500_DEBUG_UART
+	int "Ux500 UART to use for low-level debug"
+	default 2
+	help
+	  Choose the UART on which kernel low-level debug messages should be
+	  output.
+
+endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-ux500/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -2,7 +2,10 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= clock.o
-obj-$(CONFIG_ARCH_U8500)	+= cpu-u8500.o
+obj-y				:= clock.o cpu.o devices.o
+obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o devices-db5500.o
+obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_MACH_U5500)	+= board-u5500.o
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/platsmp.c linux-libre-2.6.35-gnu/arch/arm/mach-ux500/platsmp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/platsmp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/platsmp.c	2010-08-01 18:11:14.000000000 -0400
@@ -30,7 +30,7 @@
 
 static unsigned int __init get_core_count(void)
 {
-	return scu_get_core_count(__io_address(U8500_SCU_BASE));
+	return scu_get_core_count(__io_address(UX500_SCU_BASE));
 }
 
 static DEFINE_SPINLOCK(boot_lock);
@@ -44,7 +44,7 @@
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+	gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
 
 	/*
 	 * let the primary processor know we're out of the
@@ -75,7 +75,8 @@
 	 * that it has been released by resetting pen_release.
 	 */
 	pen_release = cpu;
-	flush_cache_all();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -105,12 +106,12 @@
 	 */
 #define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
 	__raw_writel(virt_to_phys(u8500_secondary_startup),
-		(void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+		__io_address(UX500_BACKUPRAM0_BASE) +
 		U8500_CPU1_JUMPADDR_OFFSET);
 
 #define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
 	__raw_writel(0xA1FEED01,
-		(void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+		__io_address(UX500_BACKUPRAM0_BASE) +
 		U8500_CPU1_WAKEMAGIC_OFFSET);
 
 	/* make sure write buffer is drained */
@@ -171,7 +172,7 @@
 		 * boot CPU, but only if we have more than one CPU.
 		 */
 		percpu_timer_setup();
-		scu_enable(__io_address(U8500_SCU_BASE));
+		scu_enable(__io_address(UX500_SCU_BASE));
 		wakeup_secondary();
 	}
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-ux500/ste-dma40-db8500.h linux-libre-2.6.35-gnu/arch/arm/mach-ux500/ste-dma40-db8500.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-ux500/ste-dma40-db8500.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-ux500/ste-dma40-db8500.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,154 @@
+/*
+ * arch/arm/mach-ux500/ste_dma40_db8500.h
+ * DB8500-SoC-specific configuration for DMA40
+ *
+ * Copyright (C) ST-Ericsson 2007-2010
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Per Friden <per.friden@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#ifndef STE_DMA40_DB8500_H
+#define STE_DMA40_DB8500_H
+
+#define STEDMA40_NR_DEV 64
+
+enum dma_src_dev_type {
+	STEDMA40_DEV_SPI0_RX = 0,
+	STEDMA40_DEV_SD_MMC0_RX = 1,
+	STEDMA40_DEV_SD_MMC1_RX = 2,
+	STEDMA40_DEV_SD_MMC2_RX = 3,
+	STEDMA40_DEV_I2C1_RX = 4,
+	STEDMA40_DEV_I2C3_RX = 5,
+	STEDMA40_DEV_I2C2_RX = 6,
+	STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */
+	STEDMA40_DEV_SSP0_RX = 8,
+	STEDMA40_DEV_SSP1_RX = 9,
+	STEDMA40_DEV_MCDE_RX = 10,
+	STEDMA40_DEV_UART2_RX = 11,
+	STEDMA40_DEV_UART1_RX = 12,
+	STEDMA40_DEV_UART0_RX = 13,
+	STEDMA40_DEV_MSP2_RX = 14,
+	STEDMA40_DEV_I2C0_RX = 15,
+	STEDMA40_DEV_USB_OTG_IEP_8 = 16,
+	STEDMA40_DEV_USB_OTG_IEP_1_9 = 17,
+	STEDMA40_DEV_USB_OTG_IEP_2_10 = 18,
+	STEDMA40_DEV_USB_OTG_IEP_3_11 = 19,
+	STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
+	STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
+	STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
+	STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
+	STEDMA40_DEV_SRC_SXA0_RX_TX = 24,
+	STEDMA40_DEV_SRC_SXA1_RX_TX = 25,
+	STEDMA40_DEV_SRC_SXA2_RX_TX = 26,
+	STEDMA40_DEV_SRC_SXA3_RX_TX = 27,
+	STEDMA40_DEV_SD_MM2_RX = 28,
+	STEDMA40_DEV_SD_MM0_RX = 29,
+	STEDMA40_DEV_MSP1_RX = 30,
+	/*
+	 * This channel is either SlimBus or MSP,
+	 * never both at the same time.
+	 */
+	STEDMA40_SLIM0_CH0_RX = 31,
+	STEDMA40_DEV_MSP0_RX = 31,
+	STEDMA40_DEV_SD_MM1_RX = 32,
+	STEDMA40_DEV_SPI2_RX = 33,
+	STEDMA40_DEV_I2C3_RX2 = 34,
+	STEDMA40_DEV_SPI1_RX = 35,
+	STEDMA40_DEV_USB_OTG_IEP_4_12 = 36,
+	STEDMA40_DEV_USB_OTG_IEP_5_13 = 37,
+	STEDMA40_DEV_USB_OTG_IEP_6_14 = 38,
+	STEDMA40_DEV_USB_OTG_IEP_7_15 = 39,
+	STEDMA40_DEV_SPI3_RX = 40,
+	STEDMA40_DEV_SD_MM3_RX = 41,
+	STEDMA40_DEV_SD_MM4_RX = 42,
+	STEDMA40_DEV_SD_MM5_RX = 43,
+	STEDMA40_DEV_SRC_SXA4_RX_TX = 44,
+	STEDMA40_DEV_SRC_SXA5_RX_TX = 45,
+	STEDMA40_DEV_SRC_SXA6_RX_TX = 46,
+	STEDMA40_DEV_SRC_SXA7_RX_TX = 47,
+	STEDMA40_DEV_CAC1_RX = 48,
+	/* RX channels 49 and 50 are unused */
+	STEDMA40_DEV_MSHC_RX = 51,
+	STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52,
+	STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53,
+	STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54,
+	STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55,
+	/* RX channels 56 thru 60 are unused */
+	STEDMA40_DEV_CAC0_RX = 61,
+	/* RX channels 62 and 63 are unused */
+};
+
+enum dma_dest_dev_type {
+	STEDMA40_DEV_SPI0_TX = 0,
+	STEDMA40_DEV_SD_MMC0_TX = 1,
+	STEDMA40_DEV_SD_MMC1_TX = 2,
+	STEDMA40_DEV_SD_MMC2_TX = 3,
+	STEDMA40_DEV_I2C1_TX = 4,
+	STEDMA40_DEV_I2C3_TX = 5,
+	STEDMA40_DEV_I2C2_TX = 6,
+	STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */
+	STEDMA40_DEV_SSP0_TX = 8,
+	STEDMA40_DEV_SSP1_TX = 9,
+	/* TX channel 10 is unused */
+	STEDMA40_DEV_UART2_TX = 11,
+	STEDMA40_DEV_UART1_TX = 12,
+	STEDMA40_DEV_UART0_TX= 13,
+	STEDMA40_DEV_MSP2_TX = 14,
+	STEDMA40_DEV_I2C0_TX = 15,
+	STEDMA40_DEV_USB_OTG_OEP_8 = 16,
+	STEDMA40_DEV_USB_OTG_OEP_1_9 = 17,
+	STEDMA40_DEV_USB_OTG_OEP_2_10= 18,
+	STEDMA40_DEV_USB_OTG_OEP_3_11 = 19,
+	STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
+	STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
+	STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
+	STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
+	STEDMA40_DEV_DST_SXA0_RX_TX = 24,
+	STEDMA40_DEV_DST_SXA1_RX_TX = 25,
+	STEDMA40_DEV_DST_SXA2_RX_TX = 26,
+	STEDMA40_DEV_DST_SXA3_RX_TX = 27,
+	STEDMA40_DEV_SD_MM2_TX = 28,
+	STEDMA40_DEV_SD_MM0_TX = 29,
+	STEDMA40_DEV_MSP1_TX = 30,
+	/*
+	 * This channel is either SlimBus or MSP,
+	 * never both at the same time.
+	 */
+	STEDMA40_SLIM0_CH0_TX = 31,
+	STEDMA40_DEV_MSP0_TX = 31,
+	STEDMA40_DEV_SD_MM1_TX = 32,
+	STEDMA40_DEV_SPI2_TX = 33,
+	/* Secondary I2C3 channel */
+	STEDMA40_DEV_I2C3_TX2 = 34,
+	STEDMA40_DEV_SPI1_TX = 35,
+	STEDMA40_DEV_USB_OTG_OEP_4_12 = 36,
+	STEDMA40_DEV_USB_OTG_OEP_5_13 = 37,
+	STEDMA40_DEV_USB_OTG_OEP_6_14 = 38,
+	STEDMA40_DEV_USB_OTG_OEP_7_15 = 39,
+	STEDMA40_DEV_SPI3_TX = 40,
+	STEDMA40_DEV_SD_MM3_TX = 41,
+	STEDMA40_DEV_SD_MM4_TX = 42,
+	STEDMA40_DEV_SD_MM5_TX = 43,
+	STEDMA40_DEV_DST_SXA4_RX_TX = 44,
+	STEDMA40_DEV_DST_SXA5_RX_TX = 45,
+	STEDMA40_DEV_DST_SXA6_RX_TX = 46,
+	STEDMA40_DEV_DST_SXA7_RX_TX = 47,
+	STEDMA40_DEV_CAC1_TX = 48,
+	STEDMA40_DEV_CAC1_TX_HAC1_TX = 49,
+	STEDMA40_DEV_HAC1_TX = 50,
+	STEDMA40_MEMXCPY_TX_0 = 51,
+	STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52,
+	STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53,
+	STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54,
+	STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55,
+	STEDMA40_MEMCPY_TX_1 = 56,
+	STEDMA40_MEMCPY_TX_2 = 57,
+	STEDMA40_MEMCPY_TX_3 = 58,
+	STEDMA40_MEMCPY_TX_4 = 59,
+	STEDMA40_MEMCPY_TX_5 = 60,
+	STEDMA40_DEV_CAC0_TX = 61,
+	STEDMA40_DEV_CAC0_TX_HAC0_TX = 62,
+	STEDMA40_DEV_HAC0_TX = 63,
+};
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-versatile/clock.c linux-libre-2.6.35-gnu/arch/arm/mach-versatile/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-versatile/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-versatile/clock.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,65 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/clock.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include <asm/clkdev.h>
-#include <asm/hardware/icst307.h>
-
-#include "clock.h"
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	struct icst307_vco vco;
-	vco = icst307_khz_to_vco(clk->params, rate / 1000);
-	return icst307_khz(clk->params, vco) * 1000;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EIO;
-
-	if (clk->setvco) {
-		struct icst307_vco vco;
-
-		vco = icst307_khz_to_vco(clk->params, rate / 1000);
-		clk->rate = icst307_khz(clk->params, vco) * 1000;
-		clk->setvco(clk, vco);
-		ret = 0;
-	}
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-versatile/clock.h linux-libre-2.6.35-gnu/arch/arm/mach-versatile/clock.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-versatile/clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-versatile/clock.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,20 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/clock.h
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct module;
-struct icst307_params;
-
-struct clk {
-	unsigned long		rate;
-	const struct icst307_params *params;
-	u32			oscoff;
-	void			*data;
-	void			(*setvco)(struct clk *, struct icst307_vco vco);
-};
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-versatile/core.c linux-libre-2.6.35-gnu/arch/arm/mach-versatile/core.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-versatile/core.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-versatile/core.c	2010-08-01 18:11:14.000000000 -0400
@@ -28,19 +28,15 @@
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl061.h>
 #include <linux/amba/mmci.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/cnt32_to_63.h>
 #include <linux/io.h>
 #include <linux/gfp.h>
 
 #include <asm/clkdev.h>
 #include <asm/system.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst307.h>
+#include <asm/hardware/icst.h>
 #include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 
@@ -49,9 +45,12 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/clkdev.h>
+#include <mach/hardware.h>
+#include <mach/platform.h>
+#include <plat/timer-sp.h>
 
 #include "core.h"
-#include "clock.h"
 
 /*
  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
@@ -59,7 +58,6 @@
  *
  * Setup a VA for the Versatile Vectored Interrupt Controller.
  */
-#define __io_address(n)		__io(IO_ADDRESS(n))
 #define VA_VIC_BASE		__io_address(VERSATILE_VIC_BASE)
 #define VA_SIC_BASE		__io_address(VERSATILE_SIC_BASE)
 
@@ -229,27 +227,6 @@
 	iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
 }
 
-#define VERSATILE_REFCOUNTER	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
-
-/*
- * This is the Versatile sched_clock implementation.  This has
- * a resolution of 41.7ns, and a maximum value of about 35583 days.
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 89 seconds between successive
- * calls to this function.
- */
-unsigned long long sched_clock(void)
-{
-	unsigned long long v = cnt32_to_63(readl(VERSATILE_REFCOUNTER));
-
-	/* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
-	v *= 125<<1;
-	do_div(v, 3<<1);
-
-	return v;
-}
-
 
 #define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
 
@@ -380,33 +357,40 @@
 /*
  * Clock handling
  */
-static const struct icst307_params versatile_oscvco_params = {
-	.ref		= 24000,
-	.vco_max	= 200000,
+static const struct icst_params versatile_oscvco_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST307_VCO_MAX,
+	.vco_min	= ICST307_VCO_MIN,
 	.vd_min		= 4 + 8,
 	.vd_max		= 511 + 8,
 	.rd_min		= 1 + 2,
 	.rd_max		= 127 + 2,
+	.s2div		= icst307_s2div,
+	.idx2s		= icst307_idx2s,
 };
 
-static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
+static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco)
 {
-	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
-	void __iomem *sys_lock = sys + VERSATILE_SYS_LOCK_OFFSET;
+	void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
 	u32 val;
 
-	val = readl(sys + clk->oscoff) & ~0x7ffff;
+	val = readl(clk->vcoreg) & ~0x7ffff;
 	val |= vco.v | (vco.r << 9) | (vco.s << 16);
 
 	writel(0xa05f, sys_lock);
-	writel(val, sys + clk->oscoff);
+	writel(val, clk->vcoreg);
 	writel(0, sys_lock);
 }
 
+static const struct clk_ops osc4_clk_ops = {
+	.round	= icst_clk_round,
+	.set	= icst_clk_set,
+	.setvco	= versatile_oscvco_set,
+};
+
 static struct clk osc4_clk = {
+	.ops	= &osc4_clk_ops,
 	.params	= &versatile_oscvco_params,
-	.oscoff	= VERSATILE_SYS_OSCCLCD_OFFSET,
-	.setvco	= versatile_oscvco_set,
 };
 
 /*
@@ -852,6 +836,8 @@
 {
 	int i;
 
+	osc4_clk.vcoreg	= __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET;
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	platform_device_register(&versatile_flash_device);
@@ -875,120 +861,6 @@
 #define TIMER1_VA_BASE		(__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
 #define TIMER2_VA_BASE		 __io_address(VERSATILE_TIMER2_3_BASE)
 #define TIMER3_VA_BASE		(__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
-#define VA_IC_BASE		 __io_address(VERSATILE_VIC_BASE) 
-
-/*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
-#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)		/* Divide by 16 */
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
-#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
-#else
-#define TIMER_RELOAD	(TIMER_INTERVAL)
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
-#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
-#endif
-
-static void timer_set_mode(enum clock_event_mode mode,
-			   struct clock_event_device *clk)
-{
-	unsigned long ctrl;
-
-	switch(mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
-
-		ctrl = TIMER_CTRL_PERIODIC;
-		ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TIMER_CTRL_ONESHOT;
-		ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
-}
-
-static int timer_set_next_event(unsigned long evt,
-				struct clock_event_device *unused)
-{
-	unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
-
-	writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
-
-	return 0;
-}
-
-static struct clock_event_device timer0_clockevent =	 {
-	.name		= "timer0",
-	.shift		= 32,
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= timer_set_mode,
-	.set_next_event	= timer_set_next_event,
-};
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &timer0_clockevent;
-
-	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction versatile_timer_irq = {
-	.name		= "Versatile Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= versatile_timer_interrupt,
-};
-
-static cycle_t versatile_get_cycles(struct clocksource *cs)
-{
-	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
-}
-
-static struct clocksource clocksource_versatile = {
-	.name 		= "timer3",
- 	.rating		= 200,
- 	.read		= versatile_get_cycles,
-	.mask		= CLOCKSOURCE_MASK(32),
- 	.shift 		= 20,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init versatile_clocksource_init(void)
-{
-	/* setup timer3 as free-running clocksource */
-	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
-	writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
-	writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
-	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-	       TIMER3_VA_BASE + TIMER_CTRL);
-
- 	clocksource_versatile.mult =
- 		clocksource_khz2mult(1000, clocksource_versatile.shift);
- 	clocksource_register(&clocksource_versatile);
-
- 	return 0;
-}
 
 /*
  * Set up timer interrupt, and return the current time in seconds.
@@ -1017,22 +889,8 @@
 	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
 	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
 
-	/* 
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(IRQ_TIMERINT0_1, &versatile_timer_irq);
-
-	versatile_clocksource_init();
-
-	timer0_clockevent.mult =
-		div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
-	timer0_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &timer0_clockevent);
-	timer0_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xf, &timer0_clockevent);
-
-	timer0_clockevent.cpumask = cpumask_of(0);
-	clockevents_register_device(&timer0_clockevent);
+	sp804_clocksource_init(TIMER3_VA_BASE);
+	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1);
 }
 
 struct sys_timer versatile_timer = {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-versatile/include/mach/clkdev.h linux-libre-2.6.35-gnu/arch/arm/mach-versatile/include/mach/clkdev.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-versatile/include/mach/clkdev.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-versatile/include/mach/clkdev.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,6 +1,15 @@
 #ifndef __ASM_MACH_CLKDEV_H
 #define __ASM_MACH_CLKDEV_H
 
+#include <plat/clock.h>
+
+struct clk {
+	unsigned long		rate;
+	const struct clk_ops	*ops;
+	const struct icst_params *params;
+	void __iomem		*vcoreg;
+};
+
 #define __clk_get(clk) ({ 1; })
 #define __clk_put(clk) do { } while (0)
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-versatile/include/mach/entry-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-versatile/include/mach/entry-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-versatile/include/mach/entry-macro.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-versatile/include/mach/entry-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -8,6 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/hardware/vic.h>
 
 		.macro	disable_fiq
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-versatile/include/mach/hardware.h linux-libre-2.6.35-gnu/arch/arm/mach-versatile/include/mach/hardware.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-versatile/include/mach/hardware.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-versatile/include/mach/hardware.h	2010-08-01 18:11:14.000000000 -0400
@@ -23,7 +23,6 @@
 #define __ASM_ARCH_HARDWARE_H
 
 #include <asm/sizes.h>
-#include <mach/platform.h>
 
 /*
  * PCI space virtual addresses
@@ -49,4 +48,6 @@
 /* macro to get at IO space when running virtually */
 #define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
 
+#define __io_address(n)		__io(IO_ADDRESS(n))
+
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-versatile/include/mach/platform.h linux-libre-2.6.35-gnu/arch/arm/mach-versatile/include/mach/platform.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-versatile/include/mach/platform.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-versatile/include/mach/platform.h	2010-08-01 18:11:14.000000000 -0400
@@ -205,7 +205,7 @@
 #define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
 #define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
 #define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
-#define VERSATILE_PERIPH_BASE          0x10150000    /* off-chip peripherals alias from */
+#define VERSATILE_PERIPH_BASE          0x10150000	/* off-chip peripherals alias from */
                                                 /* 0x10000000 - 0x100FFFFF */
 #define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
 #define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
@@ -213,7 +213,7 @@
 #define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
 #define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
 #define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
-#define VERSATILE_GPIO1_BASE           0x101E5000    /* GPIO port 1 */
+#define VERSATILE_GPIO1_BASE           0x101E5000	/* GPIO port 1 */
 #define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
 #define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
 #define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
@@ -379,12 +379,6 @@
 #define SIC_INT_PCI3                    30
 
 
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      VERSATILE_BOOT_ROM_HI
-
 /*
  * System controller bit assignment
  */
@@ -397,20 +391,6 @@
 #define VERSATILE_TIMER4_EnSel	21
 
 
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
 #define VERSATILE_CSR_BASE             0x10000000
 #define VERSATILE_CSR_SIZE             0x10000000
 
@@ -432,5 +412,3 @@
 #endif
 
 #endif
-
-/* 	END */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-versatile/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-versatile/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-versatile/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-versatile/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y					:= core.o clock.o
+obj-y					:= core.o
 obj-$(CONFIG_ARCH_VERSATILE_PB)		+= versatile_pb.o
 obj-$(CONFIG_MACH_VERSATILE_AB)		+= versatile_ab.o
 obj-$(CONFIG_PCI)			+= pci.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/core.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/core.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/core.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/core.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,26 @@
+#define __MMIO_P2V(x)	(((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000)
+#define MMIO_P2V(x)	((void __iomem *)__MMIO_P2V(x))
+
+#define AMBA_DEVICE(name,busid,base,plat)	\
+struct amba_device name##_device = {		\
+	.dev		= {			\
+		.coherent_dma_mask = ~0UL,	\
+		.init_name = busid,		\
+		.platform_data = plat,		\
+	},					\
+	.res		= {			\
+		.start	= base,			\
+		.end	= base + SZ_4K - 1,	\
+		.flags	= IORESOURCE_MEM,	\
+	},					\
+	.dma_mask	= ~0UL,			\
+	.irq		= IRQ_##base,		\
+	/* .dma		= DMA_##base,*/		\
+}
+
+struct map_desc;
+
+void v2m_map_io(struct map_desc *tile, size_t num);
+extern struct sys_timer v2m_timer;
+
+extern void __iomem *gic_cpu_base_addr;
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/ct-ca9x4.c linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/ct-ca9x4.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/ct-ca9x4.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/ct-ca9x4.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,251 @@
+/*
+ * Versatile Express Core Tile Cortex A9x4 Support
+ */
+#include <linux/init.h>
+#include <linux/gfp.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+
+#include <asm/clkdev.h>
+#include <asm/pgtable.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach-types.h>
+#include <asm/pmu.h>
+
+#include <mach/clkdev.h>
+#include <mach/ct-ca9x4.h>
+
+#include <plat/timer-sp.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include "core.h"
+
+#include <mach/motherboard.h>
+
+#define V2M_PA_CS7	0x10000000
+
+static struct map_desc ct_ca9x4_io_desc[] __initdata = {
+	{
+		.virtual	= __MMIO_P2V(CT_CA9X4_MPIC),
+		.pfn		= __phys_to_pfn(CT_CA9X4_MPIC),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= __MMIO_P2V(CT_CA9X4_SP804_TIMER),
+		.pfn		= __phys_to_pfn(CT_CA9X4_SP804_TIMER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= __MMIO_P2V(CT_CA9X4_L2CC),
+		.pfn		= __phys_to_pfn(CT_CA9X4_L2CC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init ct_ca9x4_map_io(void)
+{
+	v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
+}
+
+void __iomem *gic_cpu_base_addr;
+
+static void __init ct_ca9x4_init_irq(void)
+{
+	gic_cpu_base_addr = MMIO_P2V(A9_MPCORE_GIC_CPU);
+	gic_dist_init(0, MMIO_P2V(A9_MPCORE_GIC_DIST), 29);
+	gic_cpu_init(0, gic_cpu_base_addr);
+}
+
+#if 0
+static void ct_ca9x4_timer_init(void)
+{
+	writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
+	writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
+
+	sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1));
+	sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0);
+}
+
+static struct sys_timer ct_ca9x4_timer = {
+	.init	= ct_ca9x4_timer_init,
+};
+#endif
+
+static struct clcd_panel xvga_panel = {
+	.mode		= {
+		.name		= "XVGA",
+		.refresh	= 60,
+		.xres		= 1024,
+		.yres		= 768,
+		.pixclock	= 15384,
+		.left_margin	= 168,
+		.right_margin	= 8,
+		.upper_margin	= 29,
+		.lower_margin	= 3,
+		.hsync_len	= 144,
+		.vsync_len	= 6,
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+	.width		= -1,
+	.height		= -1,
+	.tim2		= TIM2_BCD | TIM2_IPC,
+	.cntl		= CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
+	.bpp		= 16,
+};
+
+static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
+{
+	v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0);
+	v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE_DB1, 2);
+}
+
+static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
+{
+	unsigned long framesize = 1024 * 768 * 2;
+	dma_addr_t dma;
+
+	fb->panel = &xvga_panel;
+
+	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
+				&dma, GFP_KERNEL);
+	if (!fb->fb.screen_base) {
+		printk(KERN_ERR "CLCD: unable to map frame buffer\n");
+		return -ENOMEM;
+	}
+	fb->fb.fix.smem_start = dma;
+	fb->fb.fix.smem_len = framesize;
+
+	return 0;
+}
+
+static int ct_ca9x4_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_writecombine(&fb->dev->dev, vma, fb->fb.screen_base,
+		fb->fb.fix.smem_start, fb->fb.fix.smem_len);
+}
+
+static void ct_ca9x4_clcd_remove(struct clcd_fb *fb)
+{
+	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+		fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board ct_ca9x4_clcd_data = {
+	.name		= "CT-CA9X4",
+	.check		= clcdfb_check,
+	.decode		= clcdfb_decode,
+	.enable		= ct_ca9x4_clcd_enable,
+	.setup		= ct_ca9x4_clcd_setup,
+	.mmap		= ct_ca9x4_clcd_mmap,
+	.remove		= ct_ca9x4_clcd_remove,
+};
+
+static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
+static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL);
+static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL);
+static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL);
+
+static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
+	&clcd_device,
+	&dmc_device,
+	&smc_device,
+	&gpio_device,
+};
+
+
+static long ct_round(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+
+static int ct_set(struct clk *clk, unsigned long rate)
+{
+	return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_DB1 | 1, rate);
+}
+
+static const struct clk_ops osc1_clk_ops = {
+	.round	= ct_round,
+	.set	= ct_set,
+};
+
+static struct clk osc1_clk = {
+	.ops	= &osc1_clk_ops,
+	.rate	= 24000000,
+};
+
+static struct clk_lookup lookups[] = {
+	{	/* CLCD */
+		.dev_id		= "ct:clcd",
+		.clk		= &osc1_clk,
+	},
+};
+
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start	= IRQ_CT_CA9X4_PMU_CPU0,
+		.end	= IRQ_CT_CA9X4_PMU_CPU0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start	= IRQ_CT_CA9X4_PMU_CPU1,
+		.end	= IRQ_CT_CA9X4_PMU_CPU1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_CT_CA9X4_PMU_CPU2,
+		.end	= IRQ_CT_CA9X4_PMU_CPU2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= IRQ_CT_CA9X4_PMU_CPU3,
+		.end	= IRQ_CT_CA9X4_PMU_CPU3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.num_resources	= ARRAY_SIZE(pmu_resources),
+	.resource	= pmu_resources,
+};
+
+static void ct_ca9x4_init(void)
+{
+	int i;
+
+#ifdef CONFIG_CACHE_L2X0
+	l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
+#endif
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
+		amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
+
+	platform_device_register(&pmu_device);
+}
+
+MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4")
+	.phys_io	= V2M_UART0 & SECTION_MASK,
+	.io_pg_offst	= (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x00000100,
+	.map_io		= ct_ca9x4_map_io,
+	.init_irq	= ct_ca9x4_init_irq,
+#if 0
+	.timer		= &ct_ca9x4_timer,
+#else
+	.timer		= &v2m_timer,
+#endif
+	.init_machine	= ct_ca9x4_init,
+MACHINE_END
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/headsmp.S linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/headsmp.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/headsmp.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/headsmp.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,39 @@
+/*
+ *  linux/arch/arm/mach-vexpress/headsmp.S
+ *
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * Versatile Express specific entry point for secondary CPUs.  This
+ * provides a "holding pen" into which all secondary cores are held
+ * until we're ready for them to initialise.
+ */
+ENTRY(vexpress_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+1:	.long	.
+	.long	pen_release
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/clkdev.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/clkdev.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/clkdev.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/clkdev.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,15 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#include <plat/clock.h>
+
+struct clk {
+	const struct clk_ops	*ops;
+	unsigned long		rate;
+	const struct icst_params *params;
+};
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,47 @@
+#ifndef __MACH_CT_CA9X4_H
+#define __MACH_CT_CA9X4_H
+
+/*
+ * Physical base addresses
+ */
+#define CT_CA9X4_CLCDC		(0x10020000)
+#define CT_CA9X4_AXIRAM		(0x10060000)
+#define CT_CA9X4_DMC		(0x100e0000)
+#define CT_CA9X4_SMC		(0x100e1000)
+#define CT_CA9X4_SCC		(0x100e2000)
+#define CT_CA9X4_SP804_TIMER	(0x100e4000)
+#define CT_CA9X4_SP805_WDT	(0x100e5000)
+#define CT_CA9X4_TZPC		(0x100e6000)
+#define CT_CA9X4_GPIO		(0x100e8000)
+#define CT_CA9X4_FASTAXI	(0x100e9000)
+#define CT_CA9X4_SLOWAXI	(0x100ea000)
+#define CT_CA9X4_TZASC		(0x100ec000)
+#define CT_CA9X4_CORESIGHT	(0x10200000)
+#define CT_CA9X4_MPIC		(0x1e000000)
+#define CT_CA9X4_SYSTIMER	(0x1e004000)
+#define CT_CA9X4_SYSWDT		(0x1e007000)
+#define CT_CA9X4_L2CC		(0x1e00a000)
+
+#define CT_CA9X4_TIMER0		(CT_CA9X4_SP804_TIMER + 0x000)
+#define CT_CA9X4_TIMER1		(CT_CA9X4_SP804_TIMER + 0x020)
+
+#define A9_MPCORE_SCU		(CT_CA9X4_MPIC + 0x0000)
+#define A9_MPCORE_GIC_CPU	(CT_CA9X4_MPIC + 0x0100)
+#define A9_MPCORE_GIT		(CT_CA9X4_MPIC + 0x0200)
+#define A9_MPCORE_GIC_DIST	(CT_CA9X4_MPIC + 0x1000)
+
+/*
+ * Interrupts.  Those in {} are for AMBA devices
+ */
+#define IRQ_CT_CA9X4_CLCDC	{ 76 }
+#define IRQ_CT_CA9X4_DMC	{ -1 }
+#define IRQ_CT_CA9X4_SMC	{ 77, 78 }
+#define IRQ_CT_CA9X4_TIMER0	80
+#define IRQ_CT_CA9X4_TIMER1	81
+#define IRQ_CT_CA9X4_GPIO	{ 82 }
+#define IRQ_CT_CA9X4_PMU_CPU0	92
+#define IRQ_CT_CA9X4_PMU_CPU1	93
+#define IRQ_CT_CA9X4_PMU_CPU2	94
+#define IRQ_CT_CA9X4_PMU_CPU3	95
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/debug-macro.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,23 @@
+/* arch/arm/mach-realview/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define DEBUG_LL_UART_OFFSET	0x00009000
+
+		.macro	addruart,rx,tmp
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf8000000	@ virtual base
+		orr	\rx, \rx, #DEBUG_LL_UART_OFFSET
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/entry-macro.S linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/entry-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/entry-macro.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/entry-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,67 @@
+#include <asm/hardware/gic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =gic_cpu_base_addr
+	ldr	\base, [\base]
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	/*
+	 * The interrupt numbering scheme is defined in the
+	 * interrupt controller spec.  To wit:
+	 *
+	 * Interrupts 0-15 are IPI
+	 * 16-28 are reserved
+	 * 29-31 are local.  We allow 30 to be used for the watchdog.
+	 * 32-1020 are global
+	 * 1021-1022 are reserved
+	 * 1023 is "spurious" (no interrupt)
+	 *
+	 * For now, we ignore all local interrupts so only return an interrupt if it's
+	 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+	 *
+	 * A simple read from the controller will tell us the number of the highest
+	 * priority enabled interrupt.  We then just need to check whether it is in the
+	 * valid range for an IRQ (30-1020 inclusive).
+	 */
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+	ldr	\tmp, =1021
+	bic     \irqnr, \irqstat, #0x1c00
+	cmp     \irqnr, #29
+	cmpcc	\irqnr, \irqnr
+	cmpne	\irqnr, \tmp
+	cmpcs	\irqnr, \irqnr
+	.endm
+
+	/* We assume that irqstat (the raw value of the IRQ acknowledge
+	 * register) is preserved from the macro above.
+	 * If there is an IPI, we immediately signal end of interrupt on the
+	 * controller, since this requires the original irqstat value which
+	 * we won't easily be able to recreate later.
+	 */
+
+	.macro test_for_ipi, irqnr, irqstat, base, tmp
+	bic	\irqnr, \irqstat, #0x1c00
+	cmp	\irqnr, #16
+	strcc	\irqstat, [\base, #GIC_CPU_EOI]
+	cmpcs	\irqnr, \irqnr
+	.endm
+
+	/* As above, this assumes that irqstat and base are preserved.. */
+
+	.macro test_for_ltirq, irqnr, irqstat, base, tmp
+	bic	\irqnr, \irqstat, #0x1c00
+	mov 	\tmp, #0
+	cmp	\irqnr, #29
+	moveq	\tmp, #1
+	streq	\irqstat, [\base, #GIC_CPU_EOI]
+	cmp	\tmp, #0
+	.endm
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/hardware.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/hardware.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/hardware.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/hardware.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1 @@
+/* empty */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/io.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/io.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/io.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/io.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,28 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/irqs.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/irqs.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,4 @@
+#define IRQ_LOCALTIMER		29
+#define IRQ_LOCALWDOG		30
+
+#define NR_IRQS	128
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/memory.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/memory.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/memory.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/memory.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x60000000)
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/motherboard.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/motherboard.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/motherboard.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/motherboard.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,121 @@
+#ifndef __MACH_MOTHERBOARD_H
+#define __MACH_MOTHERBOARD_H
+
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0		(V2M_PA_CS0)
+#define V2M_NOR1		(V2M_PA_CS1)
+#define V2M_SRAM		(V2M_PA_CS2)
+#define V2M_VIDEO_SRAM		(V2M_PA_CS3 + 0x00000000)
+#define V2M_LAN9118		(V2M_PA_CS3 + 0x02000000)
+#define V2M_ISP1761		(V2M_PA_CS3 + 0x03000000)
+
+/*
+ * Physical addresses, offset from V2M_PA_CS7
+ */
+#define V2M_SYSREGS		(V2M_PA_CS7 + 0x00000000)
+#define V2M_SYSCTL		(V2M_PA_CS7 + 0x00001000)
+#define V2M_SERIAL_BUS_PCI	(V2M_PA_CS7 + 0x00002000)
+
+#define V2M_AACI		(V2M_PA_CS7 + 0x00004000)
+#define V2M_MMCI		(V2M_PA_CS7 + 0x00005000)
+#define V2M_KMI0		(V2M_PA_CS7 + 0x00006000)
+#define V2M_KMI1		(V2M_PA_CS7 + 0x00007000)
+
+#define V2M_UART0		(V2M_PA_CS7 + 0x00009000)
+#define V2M_UART1		(V2M_PA_CS7 + 0x0000a000)
+#define V2M_UART2		(V2M_PA_CS7 + 0x0000b000)
+#define V2M_UART3		(V2M_PA_CS7 + 0x0000c000)
+
+#define V2M_WDT			(V2M_PA_CS7 + 0x0000f000)
+
+#define V2M_TIMER01		(V2M_PA_CS7 + 0x00011000)
+#define V2M_TIMER23		(V2M_PA_CS7 + 0x00012000)
+
+#define V2M_SERIAL_BUS_DVI	(V2M_PA_CS7 + 0x00016000)
+#define V2M_RTC			(V2M_PA_CS7 + 0x00017000)
+
+#define V2M_CF			(V2M_PA_CS7 + 0x0001a000)
+#define V2M_CLCD		(V2M_PA_CS7 + 0x0001f000)
+
+#define V2M_SYS_ID		(V2M_SYSREGS + 0x000)
+#define V2M_SYS_SW		(V2M_SYSREGS + 0x004)
+#define V2M_SYS_LED		(V2M_SYSREGS + 0x008)
+#define V2M_SYS_100HZ		(V2M_SYSREGS + 0x024)
+#define V2M_SYS_FLAGS		(V2M_SYSREGS + 0x030)
+#define V2M_SYS_FLAGSSET	(V2M_SYSREGS + 0x030)
+#define V2M_SYS_FLAGSCLR	(V2M_SYSREGS + 0x034)
+#define V2M_SYS_NVFLAGS		(V2M_SYSREGS + 0x038)
+#define V2M_SYS_NVFLAGSSET	(V2M_SYSREGS + 0x038)
+#define V2M_SYS_NVFLAGSCLR	(V2M_SYSREGS + 0x03c)
+#define V2M_SYS_MCI		(V2M_SYSREGS + 0x048)
+#define V2M_SYS_FLASH		(V2M_SYSREGS + 0x03c)
+#define V2M_SYS_CFGSW		(V2M_SYSREGS + 0x058)
+#define V2M_SYS_24MHZ		(V2M_SYSREGS + 0x05c)
+#define V2M_SYS_MISC		(V2M_SYSREGS + 0x060)
+#define V2M_SYS_DMA		(V2M_SYSREGS + 0x064)
+#define V2M_SYS_PROCID0		(V2M_SYSREGS + 0x084)
+#define V2M_SYS_PROCID1		(V2M_SYSREGS + 0x088)
+#define V2M_SYS_CFGDATA		(V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL		(V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT		(V2M_SYSREGS + 0x0a8)
+
+#define V2M_TIMER0		(V2M_TIMER01 + 0x000)
+#define V2M_TIMER1		(V2M_TIMER01 + 0x020)
+
+#define V2M_TIMER2		(V2M_TIMER23 + 0x000)
+#define V2M_TIMER3		(V2M_TIMER23 + 0x020)
+
+
+/*
+ * Interrupts.  Those in {} are for AMBA devices
+ */
+#define IRQ_V2M_WDT		{ (32 + 0) }
+#define IRQ_V2M_TIMER0		(32 + 2)
+#define IRQ_V2M_TIMER1		(32 + 2)
+#define IRQ_V2M_TIMER2		(32 + 3)
+#define IRQ_V2M_TIMER3		(32 + 3)
+#define IRQ_V2M_RTC		{ (32 + 4) }
+#define IRQ_V2M_UART0		{ (32 + 5) }
+#define IRQ_V2M_UART1		{ (32 + 6) }
+#define IRQ_V2M_UART2		{ (32 + 7) }
+#define IRQ_V2M_UART3		{ (32 + 8) }
+#define IRQ_V2M_MMCI		{ (32 + 9), (32 + 10) }
+#define IRQ_V2M_AACI		{ (32 + 11) }
+#define IRQ_V2M_KMI0		{ (32 + 12) }
+#define IRQ_V2M_KMI1		{ (32 + 13) }
+#define IRQ_V2M_CLCD		{ (32 + 14) }
+#define IRQ_V2M_LAN9118		(32 + 15)
+#define IRQ_V2M_ISP1761		(32 + 16)
+#define IRQ_V2M_PCIE		(32 + 17)
+
+
+/*
+ * Configuration
+ */
+#define SYS_CFG_START		(1 << 31)
+#define SYS_CFG_WRITE		(1 << 30)
+#define SYS_CFG_OSC		(1 << 20)
+#define SYS_CFG_VOLT		(2 << 20)
+#define SYS_CFG_AMP		(3 << 20)
+#define SYS_CFG_TEMP		(4 << 20)
+#define SYS_CFG_RESET		(5 << 20)
+#define SYS_CFG_SCC		(6 << 20)
+#define SYS_CFG_MUXFPGA		(7 << 20)
+#define SYS_CFG_SHUTDOWN	(8 << 20)
+#define SYS_CFG_REBOOT		(9 << 20)
+#define SYS_CFG_DVIMODE		(11 << 20)
+#define SYS_CFG_POWER		(12 << 20)
+#define SYS_CFG_SITE_MB		(0 << 16)
+#define SYS_CFG_SITE_DB1	(1 << 16)
+#define SYS_CFG_SITE_DB2	(2 << 16)
+#define SYS_CFG_STACK(n)	((n) << 12)
+
+#define SYS_CFG_ERR		(1 << 1)
+#define SYS_CFG_COMPLETE	(1 << 0)
+
+int v2m_cfg_write(u32 devfn, u32 data);
+int v2m_cfg_read(u32 devfn, u32 *data);
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/smp.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/smp.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/smp.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/smp.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,21 @@
+#ifndef __MACH_SMP_H
+#define __MACH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+#define hard_smp_processor_id()				\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/system.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/system.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/system.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/system.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+}
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/timex.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/timex.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/timex.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/timex.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/timex.h
+ *
+ *  RealView architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/uncompress.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/uncompress.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/uncompress.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/uncompress.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
+#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
+#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
+#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
+
+#define get_uart_base()	(0x10000000 + 0x00009000)
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR(base) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/vmalloc.h linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/vmalloc.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/include/mach/vmalloc.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/include/mach/vmalloc.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-vexpress/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		0xf8000000UL
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/Kconfig linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/Kconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,9 @@
+menu "Versatile Express platform type"
+	depends on ARCH_VEXPRESS
+
+config ARCH_VEXPRESS_CA9X4
+	bool "Versatile Express Cortex-A9x4 tile"
+	select CPU_V7
+	select ARM_GIC
+
+endmenu
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/localtimer.c linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/localtimer.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/localtimer.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/localtimer.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,26 @@
+/*
+ *  linux/arch/arm/mach-vexpress/localtimer.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+#include <mach/irqs.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/Makefile linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/Makefile	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y					:= v2m.o
+obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
+obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/Makefile.boot linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/Makefile.boot
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/Makefile.boot	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/Makefile.boot	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x60008000
+params_phys-y	:= 0x60000100
+initrd_phys-y	:= 0x60800000
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/platsmp.c linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/platsmp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/platsmp.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/platsmp.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,190 @@
+/*
+ *  linux/arch/arm/mach-vexpress/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <asm/unified.h>
+
+#include <mach/ct-ca9x4.h>
+#include <mach/motherboard.h>
+#define V2M_PA_CS7 0x10000000
+
+#include "core.h"
+
+extern void vexpress_secondary_startup(void);
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
+static void __iomem *scu_base_addr(void)
+{
+	return MMIO_P2V(A9_MPCORE_SCU);
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_cpu_init(0, gic_cpu_base_addr);
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+	smp_wmb();
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * Set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * This is really belt and braces; we hold unintended secondary
+	 * CPUs in the holding pen until we're ready for them.  However,
+	 * since we haven't sent them a soft interrupt, they shouldn't
+	 * be there.
+	 */
+	pen_release = cpu;
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+
+	/*
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * the boot monitor to read the system wide flags register,
+	 * and branch to the address found there.
+	 */
+	smp_cross_call(cpumask_of(cpu));
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		smp_rmb();
+		if (pen_release == -1)
+			break;
+
+		udelay(10);
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	void __iomem *scu_base = scu_base_addr();
+	unsigned int i, ncores;
+
+	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "vexpress: strange CM count of 0? Default to 1\n");
+
+		ncores = 1;
+	}
+
+	if (ncores > NR_CPUS) {
+		printk(KERN_WARNING
+		       "vexpress: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = num_possible_cpus();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	/*
+	 * Initialise the SCU if there are more than one CPU and let
+	 * them know where to start.
+	 */
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+
+		scu_enable(scu_base_addr());
+
+		/*
+		 * Write the address of secondary startup into the
+		 * system-wide flags register. The boot monitor waits
+		 * until it receives a soft interrupt, and then the
+		 * secondary CPU branches to this address.
+		 */
+		writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
+		writel(BSYM(virt_to_phys(vexpress_secondary_startup)),
+			MMIO_P2V(V2M_SYS_FLAGSSET));
+	}
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/v2m.c linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/v2m.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-vexpress/v2m.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-vexpress/v2m.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,361 @@
+/*
+ * Versatile Express V2M Motherboard Support
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/mmci.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/spinlock.h>
+#include <linux/sysdev.h>
+#include <linux/usb/isp1760.h>
+
+#include <asm/clkdev.h>
+#include <asm/sizes.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/arm_timer.h>
+
+#include <mach/clkdev.h>
+#include <mach/motherboard.h>
+
+#include <plat/timer-sp.h>
+
+#include "core.h"
+
+#define V2M_PA_CS0	0x40000000
+#define V2M_PA_CS1	0x44000000
+#define V2M_PA_CS2	0x48000000
+#define V2M_PA_CS3	0x4c000000
+#define V2M_PA_CS7	0x10000000
+
+static struct map_desc v2m_io_desc[] __initdata = {
+	{
+		.virtual	= __MMIO_P2V(V2M_PA_CS7),
+		.pfn		= __phys_to_pfn(V2M_PA_CS7),
+		.length		= SZ_128K,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init v2m_map_io(struct map_desc *tile, size_t num)
+{
+	iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
+	iotable_init(tile, num);
+}
+
+
+static void v2m_timer_init(void)
+{
+	writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
+	writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
+
+	sp804_clocksource_init(MMIO_P2V(V2M_TIMER1));
+	sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0);
+}
+
+struct sys_timer v2m_timer = {
+	.init	= v2m_timer_init,
+};
+
+
+static DEFINE_SPINLOCK(v2m_cfg_lock);
+
+int v2m_cfg_write(u32 devfn, u32 data)
+{
+	/* Configuration interface broken? */
+	u32 val;
+
+	printk("%s: writing %08x to %08x\n", __func__, data, devfn);
+
+	devfn |= SYS_CFG_START | SYS_CFG_WRITE;
+
+	spin_lock(&v2m_cfg_lock);
+	val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+	writel(val & ~SYS_CFG_COMPLETE, MMIO_P2V(V2M_SYS_CFGSTAT));
+
+	writel(data, MMIO_P2V(V2M_SYS_CFGDATA));
+	writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL));
+
+	do {
+		val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+	} while (val == 0);
+	spin_unlock(&v2m_cfg_lock);
+
+	return !!(val & SYS_CFG_ERR);
+}
+
+int v2m_cfg_read(u32 devfn, u32 *data)
+{
+	u32 val;
+
+	devfn |= SYS_CFG_START;
+
+	spin_lock(&v2m_cfg_lock);
+	writel(0, MMIO_P2V(V2M_SYS_CFGSTAT));
+	writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL));
+
+	mb();
+
+	do {
+		cpu_relax();
+		val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
+	} while (val == 0);
+
+	*data = readl(MMIO_P2V(V2M_SYS_CFGDATA));
+	spin_unlock(&v2m_cfg_lock);
+
+	return !!(val & SYS_CFG_ERR);
+}
+
+
+static struct resource v2m_pcie_i2c_resource = {
+	.start	= V2M_SERIAL_BUS_PCI,
+	.end	= V2M_SERIAL_BUS_PCI + SZ_4K - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device v2m_pcie_i2c_device = {
+	.name		= "versatile-i2c",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &v2m_pcie_i2c_resource,
+};
+
+static struct resource v2m_ddc_i2c_resource = {
+	.start	= V2M_SERIAL_BUS_DVI,
+	.end	= V2M_SERIAL_BUS_DVI + SZ_4K - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device v2m_ddc_i2c_device = {
+	.name		= "versatile-i2c",
+	.id		= 1,
+	.num_resources	= 1,
+	.resource	= &v2m_ddc_i2c_resource,
+};
+
+static struct resource v2m_eth_resources[] = {
+	{
+		.start	= V2M_LAN9118,
+		.end	= V2M_LAN9118 + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_V2M_LAN9118,
+		.end	= IRQ_V2M_LAN9118,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config v2m_eth_config = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device v2m_eth_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.resource	= v2m_eth_resources,
+	.num_resources	= ARRAY_SIZE(v2m_eth_resources),
+	.dev.platform_data = &v2m_eth_config,
+};
+
+static struct resource v2m_usb_resources[] = {
+	{
+		.start	= V2M_ISP1761,
+		.end	= V2M_ISP1761 + SZ_128K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_V2M_ISP1761,
+		.end	= IRQ_V2M_ISP1761,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct isp1760_platform_data v2m_usb_config = {
+	.is_isp1761		= true,
+	.bus_width_16		= false,
+	.port1_otg		= true,
+	.analog_oc		= false,
+	.dack_polarity_high	= false,
+	.dreq_polarity_high	= false,
+};
+
+static struct platform_device v2m_usb_device = {
+	.name		= "isp1760",
+	.id		= -1,
+	.resource	= v2m_usb_resources,
+	.num_resources	= ARRAY_SIZE(v2m_usb_resources),
+	.dev.platform_data = &v2m_usb_config,
+};
+
+static int v2m_flash_init(void)
+{
+	writel(0, MMIO_P2V(V2M_SYS_FLASH));
+	return 0;
+}
+
+static void v2m_flash_exit(void)
+{
+	writel(0, MMIO_P2V(V2M_SYS_FLASH));
+}
+
+static void v2m_flash_set_vpp(int on)
+{
+	writel(on != 0, MMIO_P2V(V2M_SYS_FLASH));
+}
+
+static struct flash_platform_data v2m_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 4,
+	.init		= v2m_flash_init,
+	.exit		= v2m_flash_exit,
+	.set_vpp	= v2m_flash_set_vpp,
+};
+
+static struct resource v2m_flash_resources[] = {
+	{
+		.start	= V2M_NOR0,
+		.end	= V2M_NOR0 + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= V2M_NOR1,
+		.end	= V2M_NOR1 + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device v2m_flash_device = {
+	.name		= "armflash",
+	.id		= -1,
+	.resource	= v2m_flash_resources,
+	.num_resources	= ARRAY_SIZE(v2m_flash_resources),
+	.dev.platform_data = &v2m_flash_data,
+};
+
+
+static unsigned int v2m_mmci_status(struct device *dev)
+{
+	return readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0);
+}
+
+static struct mmci_platform_data v2m_mmci_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= v2m_mmci_status,
+};
+
+static AMBA_DEVICE(aaci,  "mb:aaci",  V2M_AACI, NULL);
+static AMBA_DEVICE(mmci,  "mb:mmci",  V2M_MMCI, &v2m_mmci_data);
+static AMBA_DEVICE(kmi0,  "mb:kmi0",  V2M_KMI0, NULL);
+static AMBA_DEVICE(kmi1,  "mb:kmi1",  V2M_KMI1, NULL);
+static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL);
+static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL);
+static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL);
+static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL);
+static AMBA_DEVICE(wdt,   "mb:wdt",   V2M_WDT, NULL);
+static AMBA_DEVICE(rtc,   "mb:rtc",   V2M_RTC, NULL);
+
+static struct amba_device *v2m_amba_devs[] __initdata = {
+	&aaci_device,
+	&mmci_device,
+	&kmi0_device,
+	&kmi1_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+	&wdt_device,
+	&rtc_device,
+};
+
+
+static long v2m_osc_round(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+
+static int v2m_osc1_set(struct clk *clk, unsigned long rate)
+{
+	return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_MB | 1, rate);
+}
+
+static const struct clk_ops osc1_clk_ops = {
+	.round	= v2m_osc_round,
+	.set	= v2m_osc1_set,
+};
+
+static struct clk osc1_clk = {
+	.ops	= &osc1_clk_ops,
+	.rate	= 24000000,
+};
+
+static struct clk osc2_clk = {
+	.rate	= 24000000,
+};
+
+static struct clk_lookup v2m_lookups[] = {
+	{	/* UART0 */
+		.dev_id		= "mb:uart0",
+		.clk		= &osc2_clk,
+	}, {	/* UART1 */
+		.dev_id		= "mb:uart1",
+		.clk		= &osc2_clk,
+	}, {	/* UART2 */
+		.dev_id		= "mb:uart2",
+		.clk		= &osc2_clk,
+	}, {	/* UART3 */
+		.dev_id		= "mb:uart3",
+		.clk		= &osc2_clk,
+	}, {	/* KMI0 */
+		.dev_id		= "mb:kmi0",
+		.clk		= &osc2_clk,
+	}, {	/* KMI1 */
+		.dev_id		= "mb:kmi1",
+		.clk		= &osc2_clk,
+	}, {	/* MMC0 */
+		.dev_id		= "mb:mmci",
+		.clk		= &osc2_clk,
+	}, {	/* CLCD */
+		.dev_id		= "mb:clcd",
+		.clk		= &osc1_clk,
+	},
+};
+
+static void v2m_power_off(void)
+{
+	if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
+		printk(KERN_EMERG "Unable to shutdown\n");
+}
+
+static void v2m_restart(char str, const char *cmd)
+{
+	if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0))
+		printk(KERN_EMERG "Unable to reboot\n");
+}
+
+static int __init v2m_init(void)
+{
+	int i;
+
+	clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
+
+	platform_device_register(&v2m_pcie_i2c_device);
+	platform_device_register(&v2m_ddc_i2c_device);
+	platform_device_register(&v2m_flash_device);
+	platform_device_register(&v2m_eth_device);
+	platform_device_register(&v2m_usb_device);
+
+	for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
+		amba_device_register(v2m_amba_devs[i], &iomem_resource);
+
+	pm_power_off = v2m_power_off;
+	arm_pm_restart = v2m_restart;
+
+	return 0;
+}
+arch_initcall(v2m_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-w90x900/cpu.c linux-libre-2.6.35-gnu/arch/arm/mach-w90x900/cpu.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-w90x900/cpu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-w90x900/cpu.c	2010-08-01 18:11:14.000000000 -0400
@@ -93,7 +93,7 @@
 	DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
 	DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
 	DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
-	DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+	DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL),
 	DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
 	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
 	DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-w90x900/dev.c linux-libre-2.6.35-gnu/arch/arm/mach-w90x900/dev.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-w90x900/dev.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-w90x900/dev.c	2010-08-01 18:11:14.000000000 -0400
@@ -423,6 +423,33 @@
 }
 #endif
 
+/* AUDIO controller*/
+static u64 nuc900_device_audio_dmamask = -1;
+static struct resource nuc900_ac97_resource[] = {
+	[0] = {
+		.start = W90X900_PA_ACTL,
+		.end   = W90X900_PA_ACTL + W90X900_SZ_ACTL - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_ACTL,
+		.end   = IRQ_ACTL,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device nuc900_device_audio = {
+	.name		= "nuc900-audio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_ac97_resource),
+	.resource	= nuc900_ac97_resource,
+	.dev              = {
+		.dma_mask               = &nuc900_device_audio_dmamask,
+		.coherent_dma_mask      = -1,
+	}
+};
+
 /*Here should be your evb resourse,such as LCD*/
 
 static struct platform_device *nuc900_public_dev[] __initdata = {
@@ -434,6 +461,7 @@
 	&nuc900_device_emc,
 	&nuc900_device_spi,
 	&nuc900_device_wdt,
+	&nuc900_device_audio,
 };
 
 /* Provide adding specific CPU platform devices API */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-w90x900/include/mach/mfp.h linux-libre-2.6.35-gnu/arch/arm/mach-w90x900/include/mach/mfp.h
--- linux-libre-2.6.34-gnu/arch/arm/mach-w90x900/include/mach/mfp.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/mach-w90x900/include/mach/mfp.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/mfp.h
+ *
+ * Copyright (c) 2010 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/map.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+extern void mfp_set_groupf(struct device *dev);
+extern void mfp_set_groupc(struct device *dev);
+extern void mfp_set_groupi(struct device *dev);
+extern void mfp_set_groupg(struct device *dev);
+
+#endif /* __ASM_ARCH_MFP_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mach-w90x900/mfp.c linux-libre-2.6.35-gnu/arch/arm/mach-w90x900/mfp.c
--- linux-libre-2.6.34-gnu/arch/arm/mach-w90x900/mfp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mach-w90x900/mfp.c	2010-08-01 18:11:14.000000000 -0400
@@ -36,9 +36,12 @@
 
 #define GPIOG0TO1	(0x03 << 14)
 #define GPIOG2TO3	(0x03 << 16)
+#define GPIOG22TO23	(0x03 << 22)
+
 #define ENSPI		(0x0a << 14)
 #define ENI2C0		(0x01 << 14)
 #define ENI2C1		(0x01 << 16)
+#define ENAC97		(0x02 << 22)
 
 static DEFINE_MUTEX(mfp_mutex);
 
@@ -146,6 +149,9 @@
 	} else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
 		mfpen &= ~(GPIOG2TO3);
 		mfpen |= ENI2C1;/*enable i2c1*/
+	} else if (strcmp(dev_id, "nuc900-audio") == 0) {
+		mfpen &= ~(GPIOG22TO23);
+		mfpen |= ENAC97;/*enable AC97*/
 	} else {
 		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
 	}
diff -druN linux-libre-2.6.34-gnu/arch/arm/Makefile linux-libre-2.6.35-gnu/arch/arm/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -110,6 +110,8 @@
 head-y		:= arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
 textofs-y	:= 0x00008000
 textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
+# We don't want the htc bootloader to corrupt kernel during resume
+textofs-$(CONFIG_PM_H1940)      := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
@@ -121,6 +123,7 @@
 machine-$(CONFIG_ARCH_AT91)		:= at91
 machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
+machine-$(CONFIG_ARCH_CNS3XXX)		:= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
 machine-$(CONFIG_ARCH_DOVE)		:= dove
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
@@ -160,12 +163,12 @@
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
 machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2443
+machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440
 machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
-machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
+machine-$(CONFIG_ARCH_S5PC100)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
@@ -175,9 +178,14 @@
 machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_U8500)		:= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
+machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_ARCH_NUC93X)		:= nuc93x
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx
+machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
+machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx
+machine-$(CONFIG_MACH_SPEAR600)		:= spear6xx
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
@@ -190,8 +198,9 @@
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx samsung
-plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx samsung
 plat-$(CONFIG_PLAT_S5P)		:= s5p samsung
+plat-$(CONFIG_PLAT_SPEAR)	:= spear
+plat-$(CONFIG_PLAT_VERSATILE)	:= versatile
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/abort-ev7.S linux-libre-2.6.35-gnu/arch/arm/mm/abort-ev7.S
--- linux-libre-2.6.34-gnu/arch/arm/mm/abort-ev7.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/abort-ev7.S	2010-08-01 18:11:14.000000000 -0400
@@ -29,5 +29,26 @@
 	 * V6 code adjusts the returned DFSR.
 	 * New designs should not need to patch up faults.
 	 */
+
+#if defined(CONFIG_VERIFY_PERMISSION_FAULT)
+	/*
+	 * Detect erroneous permission failures and fix
+	 */
+	ldr	r3, =0x40d			@ On permission fault
+	and	r3, r1, r3
+	cmp	r3, #0x0d
+	movne	pc, lr
+
+	mcr	p15, 0, r0, c7, c8, 0   	@ Retranslate FAR
+	isb
+	mrc	p15, 0, r2, c7, c4, 0   	@ Read the PAR
+	and	r3, r2, #0x7b   		@ On translation fault
+	cmp	r3, #0x0b
+	movne	pc, lr
+	bic	r1, r1, #0xf			@ Fix up FSR FS[5:0]
+	and	r2, r2, #0x7e
+	orr	r1, r1, r2, LSR #1
+#endif
+
 	mov	pc, lr
 ENDPROC(v7_early_abort)
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/alignment.c linux-libre-2.6.35-gnu/arch/arm/mm/alignment.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/alignment.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/alignment.c	2010-08-01 18:11:14.000000000 -0400
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/uaccess.h>
@@ -94,36 +95,29 @@
 	"signal+warn"
 };
 
-static int
-proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
-		    void *data)
+static int alignment_proc_show(struct seq_file *m, void *v)
 {
-	char *p = page;
-	int len;
-
-	p += sprintf(p, "User:\t\t%lu\n", ai_user);
-	p += sprintf(p, "System:\t\t%lu\n", ai_sys);
-	p += sprintf(p, "Skipped:\t%lu\n", ai_skipped);
-	p += sprintf(p, "Half:\t\t%lu\n", ai_half);
-	p += sprintf(p, "Word:\t\t%lu\n", ai_word);
+	seq_printf(m, "User:\t\t%lu\n", ai_user);
+	seq_printf(m, "System:\t\t%lu\n", ai_sys);
+	seq_printf(m, "Skipped:\t%lu\n", ai_skipped);
+	seq_printf(m, "Half:\t\t%lu\n", ai_half);
+	seq_printf(m, "Word:\t\t%lu\n", ai_word);
 	if (cpu_architecture() >= CPU_ARCH_ARMv5TE)
-		p += sprintf(p, "DWord:\t\t%lu\n", ai_dword);
-	p += sprintf(p, "Multi:\t\t%lu\n", ai_multi);
-	p += sprintf(p, "User faults:\t%i (%s)\n", ai_usermode,
+		seq_printf(m, "DWord:\t\t%lu\n", ai_dword);
+	seq_printf(m, "Multi:\t\t%lu\n", ai_multi);
+	seq_printf(m, "User faults:\t%i (%s)\n", ai_usermode,
 			usermode_action[ai_usermode]);
 
-	len = (p - page) - off;
-	if (len < 0)
-		len = 0;
-
-	*eof = (len <= count) ? 1 : 0;
-	*start = page + off;
+	return 0;
+}
 
-	return len;
+static int alignment_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, alignment_proc_show, NULL);
 }
 
-static int proc_alignment_write(struct file *file, const char __user *buffer,
-				unsigned long count, void *data)
+static ssize_t alignment_proc_write(struct file *file, const char __user *buffer,
+				    size_t count, loff_t *pos)
 {
 	char mode;
 
@@ -136,6 +130,13 @@
 	return count;
 }
 
+static const struct file_operations alignment_proc_fops = {
+	.open		= alignment_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= alignment_proc_write,
+};
 #endif /* CONFIG_PROC_FS */
 
 union offset_union {
@@ -901,12 +902,10 @@
 #ifdef CONFIG_PROC_FS
 	struct proc_dir_entry *res;
 
-	res = create_proc_entry("cpu/alignment", S_IWUSR | S_IRUGO, NULL);
+	res = proc_create("cpu/alignment", S_IWUSR | S_IRUGO, NULL,
+			  &alignment_proc_fops);
 	if (!res)
 		return -ENOMEM;
-
-	res->read_proc = proc_alignment_read;
-	res->write_proc = proc_alignment_write;
 #endif
 
 	/*
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/cache-l2x0.c linux-libre-2.6.35-gnu/arch/arm/mm/cache-l2x0.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/cache-l2x0.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/cache-l2x0.c	2010-08-01 18:11:14.000000000 -0400
@@ -27,18 +27,19 @@
 
 static void __iomem *l2x0_base;
 static DEFINE_SPINLOCK(l2x0_lock);
+static uint32_t l2x0_way_mask;	/* Bitmask of active ways */
 
 static inline void cache_wait(void __iomem *reg, unsigned long mask)
 {
 	/* wait for the operation to complete */
-	while (readl(reg) & mask)
+	while (readl_relaxed(reg) & mask)
 		;
 }
 
 static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
-	writel(0, base + L2X0_CACHE_SYNC);
+	writel_relaxed(0, base + L2X0_CACHE_SYNC);
 	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -46,14 +47,14 @@
 {
 	void __iomem *base = l2x0_base;
 	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	writel(addr, base + L2X0_CLEAN_LINE_PA);
+	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
 }
 
 static inline void l2x0_inv_line(unsigned long addr)
 {
 	void __iomem *base = l2x0_base;
 	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	writel(addr, base + L2X0_INV_LINE_PA);
+	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
 }
 
 #ifdef CONFIG_PL310_ERRATA_588369
@@ -74,9 +75,9 @@
 
 	/* Clean by PA followed by Invalidate by PA */
 	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	writel(addr, base + L2X0_CLEAN_LINE_PA);
+	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
 	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	writel(addr, base + L2X0_INV_LINE_PA);
+	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
 }
 #else
 
@@ -89,7 +90,7 @@
 {
 	void __iomem *base = l2x0_base;
 	cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
-	writel(addr, base + L2X0_CLEAN_INV_LINE_PA);
+	writel_relaxed(addr, base + L2X0_CLEAN_INV_LINE_PA);
 }
 #endif
 
@@ -108,8 +109,8 @@
 
 	/* invalidate all ways */
 	spin_lock_irqsave(&l2x0_lock, flags);
-	writel(0xff, l2x0_base + L2X0_INV_WAY);
-	cache_wait(l2x0_base + L2X0_INV_WAY, 0xff);
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+	cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
 	cache_sync();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
@@ -208,27 +209,54 @@
 void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 {
 	__u32 aux;
+	__u32 cache_id;
+	int ways;
+	const char *type;
 
 	l2x0_base = base;
 
+	cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
+	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+
+	aux &= aux_mask;
+	aux |= aux_val;
+
+	/* Determine the number of ways */
+	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
+	case L2X0_CACHE_ID_PART_L310:
+		if (aux & (1 << 16))
+			ways = 16;
+		else
+			ways = 8;
+		type = "L310";
+		break;
+	case L2X0_CACHE_ID_PART_L210:
+		ways = (aux >> 13) & 0xf;
+		type = "L210";
+		break;
+	default:
+		/* Assume unknown chips have 8 ways */
+		ways = 8;
+		type = "L2x0 series";
+		break;
+	}
+
+	l2x0_way_mask = (1 << ways) - 1;
+
 	/*
 	 * Check if l2x0 controller is already enabled.
 	 * If you are booting from non-secure mode
 	 * accessing the below registers will fault.
 	 */
-	if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
 
 		/* l2x0 controller is disabled */
-
-		aux = readl(l2x0_base + L2X0_AUX_CTRL);
-		aux &= aux_mask;
-		aux |= aux_val;
-		writel(aux, l2x0_base + L2X0_AUX_CTRL);
+		writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
 
 		l2x0_inv_all();
 
 		/* enable L2X0 */
-		writel(1, l2x0_base + L2X0_CTRL);
+		writel_relaxed(1, l2x0_base + L2X0_CTRL);
 	}
 
 	outer_cache.inv_range = l2x0_inv_range;
@@ -236,5 +264,7 @@
 	outer_cache.flush_range = l2x0_flush_range;
 	outer_cache.sync = l2x0_cache_sync;
 
-	printk(KERN_INFO "L2X0 cache controller enabled\n");
+	printk(KERN_INFO "%s cache controller enabled\n", type);
+	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n",
+			 ways, cache_id, aux);
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/cache-v6.S linux-libre-2.6.35-gnu/arch/arm/mm/cache-v6.S
--- linux-libre-2.6.34-gnu/arch/arm/mm/cache-v6.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/cache-v6.S	2010-08-01 18:11:14.000000000 -0400
@@ -211,8 +211,9 @@
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
-#ifdef CONFIG_SMP
-	str	r0, [r0]			@ write for ownership
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldr	r2, [r0]			@ read for ownership
+	str	r2, [r0]			@ write for ownership
 #endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
@@ -234,7 +235,7 @@
 v6_dma_clean_range:
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
 	ldr	r2, [r0]			@ read for ownership
 #endif
 #ifdef HARVARD_CACHE
@@ -257,7 +258,7 @@
 ENTRY(v6_dma_flush_range)
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
-#ifdef CONFIG_SMP
+#ifdef CONFIG_DMA_CACHE_RWFO
 	ldr	r2, [r0]			@ read for ownership
 	str	r2, [r0]			@ write for ownership
 #endif
@@ -283,9 +284,13 @@
 	add	r1, r1, r0
 	teq	r2, #DMA_FROM_DEVICE
 	beq	v6_dma_inv_range
+#ifndef CONFIG_DMA_CACHE_RWFO
+	b	v6_dma_clean_range
+#else
 	teq	r2, #DMA_TO_DEVICE
 	beq	v6_dma_clean_range
 	b	v6_dma_flush_range
+#endif
 ENDPROC(v6_dma_map_area)
 
 /*
@@ -295,6 +300,11 @@
  *	- dir	- DMA direction
  */
 ENTRY(v6_dma_unmap_area)
+#ifndef CONFIG_DMA_CACHE_RWFO
+	add	r1, r1, r0
+	teq	r2, #DMA_TO_DEVICE
+	bne	v6_dma_inv_range
+#endif
 	mov	pc, lr
 ENDPROC(v6_dma_unmap_area)
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/cache-v7.S linux-libre-2.6.35-gnu/arch/arm/mm/cache-v7.S
--- linux-libre-2.6.34-gnu/arch/arm/mm/cache-v7.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/cache-v7.S	2010-08-01 18:11:14.000000000 -0400
@@ -91,7 +91,11 @@
  THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
 	bl	v7_flush_dcache_all
 	mov	r0, #0
+#ifdef CONFIG_SMP
+	mcr	p15, 0, r0, c7, c1, 0		@ invalidate I-cache inner shareable
+#else
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
+#endif
  ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
  THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
 	mov	pc, lr
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/copypage-fa.c linux-libre-2.6.35-gnu/arch/arm/mm/copypage-fa.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/copypage-fa.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/copypage-fa.c	2010-08-01 18:11:14.000000000 -0400
@@ -40,7 +40,7 @@
 }
 
 void fa_copy_user_highpage(struct page *to, struct page *from,
-	unsigned long vaddr)
+	unsigned long vaddr, struct vm_area_struct *vma)
 {
 	void *kto, *kfrom;
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/copypage-feroceon.c linux-libre-2.6.35-gnu/arch/arm/mm/copypage-feroceon.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/copypage-feroceon.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/copypage-feroceon.c	2010-08-01 18:11:14.000000000 -0400
@@ -18,7 +18,7 @@
 {
 	asm("\
 	stmfd	sp!, {r4-r9, lr}		\n\
-	mov	ip, %0				\n\
+	mov	ip, %2				\n\
 1:	mov	lr, r1				\n\
 	ldmia	r1!, {r2 - r9}			\n\
 	pld	[lr, #32]			\n\
@@ -64,7 +64,7 @@
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB\n\
 	ldmfd	sp!, {r4-r9, pc}"
 	:
-	: "I" (PAGE_SIZE));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE));
 }
 
 void feroceon_copy_user_highpage(struct page *to, struct page *from,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/copypage-v4wb.c linux-libre-2.6.35-gnu/arch/arm/mm/copypage-v4wb.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/copypage-v4wb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/copypage-v4wb.c	2010-08-01 18:11:14.000000000 -0400
@@ -27,7 +27,7 @@
 {
 	asm("\
 	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
+	mov	r2, %2				@ 1\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
 1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
 	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
@@ -44,7 +44,7 @@
 	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB\n\
 	ldmfd	 sp!, {r4, pc}			@ 3"
 	:
-	: "I" (PAGE_SIZE / 64));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
 }
 
 void v4wb_copy_user_highpage(struct page *to, struct page *from,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/copypage-v4wt.c linux-libre-2.6.35-gnu/arch/arm/mm/copypage-v4wt.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/copypage-v4wt.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/copypage-v4wt.c	2010-08-01 18:11:14.000000000 -0400
@@ -25,7 +25,7 @@
 {
 	asm("\
 	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
+	mov	r2, %2				@ 1\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
 1:	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
@@ -40,7 +40,7 @@
 	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache\n\
 	ldmfd	sp!, {r4, pc}			@ 3"
 	:
-	: "I" (PAGE_SIZE / 64));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
 }
 
 void v4wt_copy_user_highpage(struct page *to, struct page *from,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/copypage-xsc3.c linux-libre-2.6.35-gnu/arch/arm/mm/copypage-xsc3.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/copypage-xsc3.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/copypage-xsc3.c	2010-08-01 18:11:14.000000000 -0400
@@ -34,7 +34,7 @@
 {
 	asm("\
 	stmfd	sp!, {r4, r5, lr}		\n\
-	mov	lr, %0				\n\
+	mov	lr, %2				\n\
 						\n\
 	pld	[r1, #0]			\n\
 	pld	[r1, #32]			\n\
@@ -67,7 +67,7 @@
 						\n\
 	ldmfd	sp!, {r4, r5, pc}"
 	:
-	: "I" (PAGE_SIZE / 64 - 1));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1));
 }
 
 void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/dma-mapping.c linux-libre-2.6.35-gnu/arch/arm/mm/dma-mapping.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/dma-mapping.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/dma-mapping.c	2010-08-01 18:11:14.000000000 -0400
@@ -24,15 +24,6 @@
 #include <asm/tlbflush.h>
 #include <asm/sizes.h>
 
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
-
-#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
-
 static u64 get_coherent_dma_mask(struct device *dev)
 {
 	u64 mask = ISA_DMA_THRESHOLD;
@@ -123,6 +114,15 @@
 }
 
 #ifdef CONFIG_MMU
+/* Sanity check size */
+#if (CONSISTENT_DMA_SIZE % SZ_2M)
+#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
+#endif
+
+#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
+#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/fault-armv.c linux-libre-2.6.35-gnu/arch/arm/mm/fault-armv.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/fault-armv.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/fault-armv.c	2010-08-01 18:11:14.000000000 -0400
@@ -134,8 +134,6 @@
 	flush_dcache_mmap_unlock(mapping);
 	if (aliases)
 		do_adjust_pte(vma, addr, pfn, ptep);
-	else
-		flush_cache_page(vma, addr, pfn);
 }
 
 /*
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/fault.c linux-libre-2.6.35-gnu/arch/arm/mm/fault.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/fault.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/fault.c	2010-08-01 18:11:14.000000000 -0400
@@ -393,6 +393,9 @@
 	if (addr < TASK_SIZE)
 		return do_page_fault(addr, fsr, regs);
 
+	if (user_mode(regs))
+		goto bad_area;
+
 	index = pgd_index(addr);
 
 	/*
@@ -463,7 +466,12 @@
 	{ do_bad,		SIGILL,	 BUS_ADRALN,	"alignment exception"		   },
 	{ do_bad,		SIGKILL, 0,		"terminal exception"		   },
 	{ do_bad,		SIGILL,	 BUS_ADRALN,	"alignment exception"		   },
+/* Do we need runtime check ? */
+#if __LINUX_ARM_ARCH__ < 6
 	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
+#else
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"I-cache maintenance fault"	   },
+#endif
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
 	{ do_bad,		SIGBUS,	 0,		"external abort on linefetch"	   },
 	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/highmem.c linux-libre-2.6.35-gnu/arch/arm/mm/highmem.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/highmem.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/highmem.c	2010-08-01 18:11:14.000000000 -0400
@@ -48,7 +48,16 @@
 
 	debug_kmap_atomic(type);
 
-	kmap = kmap_high_get(page);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	/*
+	 * There is no cache coherency issue when non VIVT, so force the
+	 * dedicated kmap usage for better debugging purposes in that case.
+	 */
+	if (!cache_is_vivt())
+		kmap = NULL;
+	else
+#endif
+		kmap = kmap_high_get(page);
 	if (kmap)
 		return kmap;
 
@@ -154,19 +163,22 @@
 
 void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte)
 {
-	unsigned int idx, cpu = smp_processor_id();
-	int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+	unsigned int idx, cpu;
+	int *depth;
 	unsigned long vaddr, flags;
 	pte_t pte, *ptep;
 
+	if (!in_interrupt())
+		preempt_disable();
+
+	cpu = smp_processor_id();
+	depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+
 	idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	ptep = TOP_PTE(vaddr);
 	pte = mk_pte(page, kmap_prot);
 
-	if (!in_interrupt())
-		preempt_disable();
-
 	raw_local_irq_save(flags);
 	(*depth)++;
 	if (pte_val(*ptep) == pte_val(pte)) {
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/init.c linux-libre-2.6.35-gnu/arch/arm/mm/init.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/init.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/init.c	2010-08-01 18:11:14.000000000 -0400
@@ -15,7 +15,6 @@
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
-#include <linux/sort.h>
 #include <linux/highmem.h>
 #include <linux/gfp.h>
 
@@ -224,20 +223,6 @@
 	return initrd_node;
 }
 
-static inline void map_memory_bank(struct membank *bank)
-{
-#ifdef CONFIG_MMU
-	struct map_desc map;
-
-	map.pfn = bank_pfn_start(bank);
-	map.virtual = __phys_to_virt(bank_phys_start(bank));
-	map.length = bank_phys_size(bank);
-	map.type = MT_MEMORY;
-
-	create_mapping(&map);
-#endif
-}
-
 static void __init bootmem_init_node(int node, struct meminfo *mi,
 	unsigned long start_pfn, unsigned long end_pfn)
 {
@@ -247,16 +232,6 @@
 	int i;
 
 	/*
-	 * Map the memory banks for this node.
-	 */
-	for_each_nodebank(i, mi, node) {
-		struct membank *bank = &mi->bank[i];
-
-		if (!bank->highmem)
-			map_memory_bank(bank);
-	}
-
-	/*
 	 * Allocate the bootmem bitmap page.
 	 */
 	boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
@@ -385,21 +360,12 @@
 }
 #endif
 
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
-	const struct membank *a = _a, *b = _b;
-	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
-	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
-}
-
 void __init bootmem_init(void)
 {
 	struct meminfo *mi = &meminfo;
 	unsigned long min, max_low, max_high;
 	int node, initrd_node;
 
-	sort(&mi->bank, mi->nr_banks, sizeof(mi->bank[0]), meminfo_cmp, NULL);
-
 	/*
 	 * Locate which node contains the ramdisk image, if any.
 	 */
@@ -712,10 +678,10 @@
 void free_initmem(void)
 {
 #ifdef CONFIG_HAVE_TCM
-	extern char *__tcm_start, *__tcm_end;
+	extern char __tcm_start, __tcm_end;
 
-	totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
-				    __phys_to_pfn(__pa(__tcm_end)),
+	totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)),
+				    __phys_to_pfn(__pa(&__tcm_end)),
 				    "TCM link");
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/Kconfig linux-libre-2.6.35-gnu/arch/arm/mm/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/mm/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -572,6 +572,8 @@
 config CPU_TLB_V7
 	bool
 
+config VERIFY_PERMISSION_FAULT
+	bool
 endif
 
 config CPU_HAS_ASID
@@ -733,6 +735,25 @@
 	  Forget about fast user space cmpxchg support.
 	  It is just not possible.
 
+config DMA_CACHE_RWFO
+	bool "Enable read/write for ownership DMA cache maintenance"
+	depends on CPU_V6 && SMP
+	default y
+	help
+	  The Snoop Control Unit on ARM11MPCore does not detect the
+	  cache maintenance operations and the dma_{map,unmap}_area()
+	  functions may leave stale cache entries on other CPUs. By
+	  enabling this option, Read or Write For Ownership in the ARMv6
+	  DMA cache maintenance functions is performed. These LDR/STR
+	  instructions change the cache line state to shared or modified
+	  so that the cache operation has the desired effect.
+
+	  Note that the workaround is only valid on processors that do
+	  not perform speculative loads into the D-cache. For such
+	  processors, if cache maintenance operations are not broadcast
+	  in hardware, other workarounds are needed (e.g. cache
+	  maintenance broadcasting in software via FIQ).
+
 config OUTER_CACHE
 	bool
 
@@ -760,7 +781,8 @@
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4
+		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
+		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
 	default y
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
@@ -769,7 +791,7 @@
 
 config CACHE_TAUROS2
 	bool "Enable the Tauros2 L2 cache controller"
-	depends on ARCH_DOVE
+	depends on (ARCH_DOVE || ARCH_MMP)
 	default y
 	select OUTER_CACHE
 	help
@@ -789,6 +811,27 @@
 	default 6 if ARM_L1_CACHE_SHIFT_6
 	default 5
 
+config ARM_DMA_MEM_BUFFERABLE
+	bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7
+	depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
+		     MACH_REALVIEW_PB11MP)
+	default y if CPU_V6 || CPU_V7
+	help
+	  Historically, the kernel has used strongly ordered mappings to
+	  provide DMA coherent memory.  With the advent of ARMv7, mapping
+	  memory with differing types results in unpredictable behaviour,
+	  so on these CPUs, this option is forced on.
+
+	  Multiple mappings with differing attributes is also unpredictable
+	  on ARMv6 CPUs, but since they do not have aggressive speculative
+	  prefetch, no harm appears to occur.
+
+	  However, drivers may be missing the necessary barriers for ARMv6,
+	  and therefore turning this on may result in unpredictable driver
+	  behaviour.  Therefore, we offer this as an option.
+
+	  You are recommended say 'Y' here and debug any affected drivers.
+
 config ARCH_HAS_BARRIERS
 	bool
 	help
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/mm.h linux-libre-2.6.35-gnu/arch/arm/mm/mm.h
--- linux-libre-2.6.34-gnu/arch/arm/mm/mm.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/mm.h	2010-08-01 18:11:14.000000000 -0400
@@ -28,10 +28,7 @@
 
 #endif
 
-struct map_desc;
-struct meminfo;
 struct pglist_data;
 
-void __init create_mapping(struct map_desc *md);
 void __init bootmem_init(void);
 void reserve_node_zero(struct pglist_data *pgdat);
diff -druN linux-libre-2.6.34-gnu/arch/arm/mm/mmu.c linux-libre-2.6.35-gnu/arch/arm/mm/mmu.c
--- linux-libre-2.6.34-gnu/arch/arm/mm/mmu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/mm/mmu.c	2010-08-01 18:11:14.000000000 -0400
@@ -14,6 +14,7 @@
 #include <linux/bootmem.h>
 #include <linux/mman.h>
 #include <linux/nodemask.h>
+#include <linux/sort.h>
 
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
@@ -603,7 +604,7 @@
  * offsets, and we take full advantage of sections and
  * supersections.
  */
-void __init create_mapping(struct map_desc *md)
+static void __init create_mapping(struct map_desc *md)
 {
 	unsigned long phys, addr, length, end;
 	const struct mem_type *type;
@@ -869,9 +870,10 @@
 	if (machine_is_p720t())
 		res_size = 0x00014000;
 
-	/* H1940 and RX3715 need to reserve this for suspend */
+	/* H1940, RX3715 and RX1950 need to reserve this for suspend */
 
-	if (machine_is_h1940() || machine_is_rx3715()) {
+	if (machine_is_h1940() || machine_is_rx3715()
+		|| machine_is_rx1950()) {
 		reserve_bootmem_node(pgdat, 0x30003000, 0x1000,
 				BOOTMEM_DEFAULT);
 		reserve_bootmem_node(pgdat, 0x30081000, 0x1000,
@@ -1017,6 +1019,39 @@
 #endif
 }
 
+static inline void map_memory_bank(struct membank *bank)
+{
+	struct map_desc map;
+
+	map.pfn = bank_pfn_start(bank);
+	map.virtual = __phys_to_virt(bank_phys_start(bank));
+	map.length = bank_phys_size(bank);
+	map.type = MT_MEMORY;
+
+	create_mapping(&map);
+}
+
+static void __init map_lowmem(void)
+{
+	struct meminfo *mi = &meminfo;
+	int i;
+
+	/* Map all the lowmem memory banks. */
+	for (i = 0; i < mi->nr_banks; i++) {
+		struct membank *bank = &mi->bank[i];
+
+		if (!bank->highmem)
+			map_memory_bank(bank);
+	}
+}
+
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+	const struct membank *a = _a, *b = _b;
+	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
+
 /*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
@@ -1025,9 +1060,12 @@
 {
 	void *zero_page;
 
+	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
+
 	build_mem_type_table();
 	sanity_check_meminfo();
 	prepare_page_table();
+	map_lowmem();
 	bootmem_init();
 	devicemaps_init(mdesc);
 	kmap_init();
diff -druN linux-libre-2.6.34-gnu/arch/arm/nwfpe/ChangeLog linux-libre-2.6.35-gnu/arch/arm/nwfpe/ChangeLog
--- linux-libre-2.6.34-gnu/arch/arm/nwfpe/ChangeLog	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/nwfpe/ChangeLog	2010-08-01 18:11:14.000000000 -0400
@@ -72,7 +72,7 @@
 1998-11-23  Scott Bambrough  <scottb@netwinder.org>
 
 	* README.FPE - fix typo in description of lfm/sfm instructions
-	* NOTES - Added file to describe known bugs/problems 
+	* NOTES - Added file to describe known bugs/problems
 	* fpmodule.c - Changed version number to 0.94
 
 1998-11-20  Scott Bambrough  <scottb@netwinder.org>
diff -druN linux-libre-2.6.34-gnu/arch/arm/nwfpe/fpmodule.c linux-libre-2.6.35-gnu/arch/arm/nwfpe/fpmodule.c
--- linux-libre-2.6.34-gnu/arch/arm/nwfpe/fpmodule.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/nwfpe/fpmodule.c	2010-08-01 18:11:14.000000000 -0400
@@ -24,6 +24,7 @@
 #include "fpa11.h"
 
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 
 /* XXX */
 #include <linux/errno.h>
@@ -134,13 +135,17 @@
 cumulative exceptions flag byte are set and we return.
 */
 
+#ifdef CONFIG_DEBUG_USER
+/* By default, ignore inexact errors as there are far too many of them to log */
+static int debug = ~BIT_IXC;
+#endif
+
 void float_raise(signed char flags)
 {
 	register unsigned int fpsr, cumulativeTraps;
 
 #ifdef CONFIG_DEBUG_USER
- 	/* Ignore inexact errors as there are far too many of them to log */
- 	if (flags & ~BIT_IXC)
+	if (flags & debug)
  		printk(KERN_DEBUG
 		       "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
 		       current->comm, current->pid, flags,
@@ -179,3 +184,7 @@
 MODULE_AUTHOR("Scott Bambrough <scottb@rebel.com>");
 MODULE_DESCRIPTION("NWFPE floating point emulator (" NWFPE_BITS " precision)");
 MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_DEBUG_USER
+module_param(debug, int, 0644);
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/nwfpe/fpsr.h linux-libre-2.6.35-gnu/arch/arm/nwfpe/fpsr.h
--- linux-libre-2.6.34-gnu/arch/arm/nwfpe/fpsr.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/nwfpe/fpsr.h	2010-08-01 18:11:14.000000000 -0400
@@ -30,7 +30,7 @@
 	EXCEPTION TRAP ENABLE BYTE
 	SYSTEM CONTROL BYTE
 	CUMULATIVE EXCEPTION FLAGS BYTE
-	
+
 The FPCR is a 32 bit register consisting of bit flags.
 */
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/backtrace.c linux-libre-2.6.35-gnu/arch/arm/oprofile/backtrace.c
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/backtrace.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/backtrace.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,83 +0,0 @@
-/*
- * Arm specific backtracing code for oprofile
- *
- * Copyright 2005 Openedhand Ltd.
- *
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * Based on i386 oprofile backtrace code by John Levon, David Smith
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/oprofile.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/uaccess.h>
-#include <asm/ptrace.h>
-#include <asm/stacktrace.h>
-
-static int report_trace(struct stackframe *frame, void *d)
-{
-	unsigned int *depth = d;
-
-	if (*depth) {
-		oprofile_add_trace(frame->pc);
-		(*depth)--;
-	}
-
-	return *depth == 0;
-}
-
-/*
- * The registers we're interested in are at the end of the variable
- * length saved register structure. The fp points at the end of this
- * structure so the address of this struct is:
- * (struct frame_tail *)(xxx->fp)-1
- */
-struct frame_tail {
-	struct frame_tail *fp;
-	unsigned long sp;
-	unsigned long lr;
-} __attribute__((packed));
-
-static struct frame_tail* user_backtrace(struct frame_tail *tail)
-{
-	struct frame_tail buftail[2];
-
-	/* Also check accessibility of one struct frame_tail beyond */
-	if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
-		return NULL;
-	if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail)))
-		return NULL;
-
-	oprofile_add_trace(buftail[0].lr);
-
-	/* frame pointers should strictly progress back up the stack
-	 * (towards higher addresses) */
-	if (tail >= buftail[0].fp)
-		return NULL;
-
-	return buftail[0].fp-1;
-}
-
-void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
-{
-	struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1;
-
-	if (!user_mode(regs)) {
-		struct stackframe frame;
-		frame.fp = regs->ARM_fp;
-		frame.sp = regs->ARM_sp;
-		frame.lr = regs->ARM_lr;
-		frame.pc = regs->ARM_pc;
-		walk_stackframe(&frame, report_trace, &depth);
-		return;
-	}
-
-	while (depth-- && tail && !((unsigned long) tail & 3))
-		tail = user_backtrace(tail);
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/common.c linux-libre-2.6.35-gnu/arch/arm/oprofile/common.c
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/common.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/common.c	2010-08-01 18:11:14.000000000 -0400
@@ -2,32 +2,184 @@
  * @file common.c
  *
  * @remark Copyright 2004 Oprofile Authors
+ * @remark Copyright 2010 ARM Ltd.
  * @remark Read the file COPYING
  *
  * @author Zwane Mwaikambo
+ * @author Will Deacon [move to perf]
  */
 
+#include <linux/cpumask.h>
+#include <linux/err.h>
+#include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/mutex.h>
 #include <linux/oprofile.h>
-#include <linux/errno.h>
+#include <linux/perf_event.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
-#include <linux/sysdev.h>
-#include <linux/mutex.h>
+#include <asm/stacktrace.h>
+#include <linux/uaccess.h>
 
-#include "op_counter.h"
-#include "op_arm_model.h"
+#include <asm/perf_event.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_HW_PERF_EVENTS
+/*
+ * Per performance monitor configuration as set via oprofilefs.
+ */
+struct op_counter_config {
+	unsigned long count;
+	unsigned long enabled;
+	unsigned long event;
+	unsigned long unit_mask;
+	unsigned long kernel;
+	unsigned long user;
+	struct perf_event_attr attr;
+};
 
-static struct op_arm_model_spec *op_arm_model;
 static int op_arm_enabled;
 static DEFINE_MUTEX(op_arm_mutex);
 
-struct op_counter_config *counter_config;
+static struct op_counter_config *counter_config;
+static struct perf_event **perf_events[nr_cpumask_bits];
+static int perf_num_counters;
+
+/*
+ * Overflow callback for oprofile.
+ */
+static void op_overflow_handler(struct perf_event *event, int unused,
+			struct perf_sample_data *data, struct pt_regs *regs)
+{
+	int id;
+	u32 cpu = smp_processor_id();
+
+	for (id = 0; id < perf_num_counters; ++id)
+		if (perf_events[cpu][id] == event)
+			break;
+
+	if (id != perf_num_counters)
+		oprofile_add_sample(regs, id);
+	else
+		pr_warning("oprofile: ignoring spurious overflow "
+				"on cpu %u\n", cpu);
+}
+
+/*
+ * Called by op_arm_setup to create perf attributes to mirror the oprofile
+ * settings in counter_config. Attributes are created as `pinned' events and
+ * so are permanently scheduled on the PMU.
+ */
+static void op_perf_setup(void)
+{
+	int i;
+	u32 size = sizeof(struct perf_event_attr);
+	struct perf_event_attr *attr;
+
+	for (i = 0; i < perf_num_counters; ++i) {
+		attr = &counter_config[i].attr;
+		memset(attr, 0, size);
+		attr->type		= PERF_TYPE_RAW;
+		attr->size		= size;
+		attr->config		= counter_config[i].event;
+		attr->sample_period	= counter_config[i].count;
+		attr->pinned		= 1;
+	}
+}
+
+static int op_create_counter(int cpu, int event)
+{
+	int ret = 0;
+	struct perf_event *pevent;
+
+	if (!counter_config[event].enabled || (perf_events[cpu][event] != NULL))
+		return ret;
+
+	pevent = perf_event_create_kernel_counter(&counter_config[event].attr,
+						  cpu, -1,
+						  op_overflow_handler);
+
+	if (IS_ERR(pevent)) {
+		ret = PTR_ERR(pevent);
+	} else if (pevent->state != PERF_EVENT_STATE_ACTIVE) {
+		pr_warning("oprofile: failed to enable event %d "
+				"on CPU %d\n", event, cpu);
+		ret = -EBUSY;
+	} else {
+		perf_events[cpu][event] = pevent;
+	}
+
+	return ret;
+}
+
+static void op_destroy_counter(int cpu, int event)
+{
+	struct perf_event *pevent = perf_events[cpu][event];
+
+	if (pevent) {
+		perf_event_release_kernel(pevent);
+		perf_events[cpu][event] = NULL;
+	}
+}
+
+/*
+ * Called by op_arm_start to create active perf events based on the
+ * perviously configured attributes.
+ */
+static int op_perf_start(void)
+{
+	int cpu, event, ret = 0;
+
+	for_each_online_cpu(cpu) {
+		for (event = 0; event < perf_num_counters; ++event) {
+			ret = op_create_counter(cpu, event);
+			if (ret)
+				goto out;
+		}
+	}
+
+out:
+	return ret;
+}
+
+/*
+ * Called by op_arm_stop at the end of a profiling run.
+ */
+static void op_perf_stop(void)
+{
+	int cpu, event;
+
+	for_each_online_cpu(cpu)
+		for (event = 0; event < perf_num_counters; ++event)
+			op_destroy_counter(cpu, event);
+}
+
+
+static char *op_name_from_perf_id(enum arm_perf_pmu_ids id)
+{
+	switch (id) {
+	case ARM_PERF_PMU_ID_XSCALE1:
+		return "arm/xscale1";
+	case ARM_PERF_PMU_ID_XSCALE2:
+		return "arm/xscale2";
+	case ARM_PERF_PMU_ID_V6:
+		return "arm/armv6";
+	case ARM_PERF_PMU_ID_V6MP:
+		return "arm/mpcore";
+	case ARM_PERF_PMU_ID_CA8:
+		return "arm/armv7";
+	case ARM_PERF_PMU_ID_CA9:
+		return "arm/armv7-ca9";
+	default:
+		return NULL;
+	}
+}
 
 static int op_arm_create_files(struct super_block *sb, struct dentry *root)
 {
 	unsigned int i;
 
-	for (i = 0; i < op_arm_model->num_counters; i++) {
+	for (i = 0; i < perf_num_counters; i++) {
 		struct dentry *dir;
 		char buf[4];
 
@@ -46,12 +198,10 @@
 
 static int op_arm_setup(void)
 {
-	int ret;
-
 	spin_lock(&oprofilefs_lock);
-	ret = op_arm_model->setup_ctrs();
+	op_perf_setup();
 	spin_unlock(&oprofilefs_lock);
-	return ret;
+	return 0;
 }
 
 static int op_arm_start(void)
@@ -60,8 +210,9 @@
 
 	mutex_lock(&op_arm_mutex);
 	if (!op_arm_enabled) {
-		ret = op_arm_model->start();
-		op_arm_enabled = !ret;
+		ret = 0;
+		op_perf_start();
+		op_arm_enabled = 1;
 	}
 	mutex_unlock(&op_arm_mutex);
 	return ret;
@@ -71,113 +222,205 @@
 {
 	mutex_lock(&op_arm_mutex);
 	if (op_arm_enabled)
-		op_arm_model->stop();
+		op_perf_stop();
 	op_arm_enabled = 0;
 	mutex_unlock(&op_arm_mutex);
 }
 
 #ifdef CONFIG_PM
-static int op_arm_suspend(struct sys_device *dev, pm_message_t state)
+static int op_arm_suspend(struct platform_device *dev, pm_message_t state)
 {
 	mutex_lock(&op_arm_mutex);
 	if (op_arm_enabled)
-		op_arm_model->stop();
+		op_perf_stop();
 	mutex_unlock(&op_arm_mutex);
 	return 0;
 }
 
-static int op_arm_resume(struct sys_device *dev)
+static int op_arm_resume(struct platform_device *dev)
 {
 	mutex_lock(&op_arm_mutex);
-	if (op_arm_enabled && op_arm_model->start())
+	if (op_arm_enabled && op_perf_start())
 		op_arm_enabled = 0;
 	mutex_unlock(&op_arm_mutex);
 	return 0;
 }
 
-static struct sysdev_class oprofile_sysclass = {
-	.name		= "oprofile",
+static struct platform_driver oprofile_driver = {
+	.driver		= {
+		.name		= "arm-oprofile",
+	},
 	.resume		= op_arm_resume,
 	.suspend	= op_arm_suspend,
 };
 
-static struct sys_device device_oprofile = {
-	.id		= 0,
-	.cls		= &oprofile_sysclass,
-};
+static struct platform_device *oprofile_pdev;
 
 static int __init init_driverfs(void)
 {
 	int ret;
 
-	if (!(ret = sysdev_class_register(&oprofile_sysclass)))
-		ret = sysdev_register(&device_oprofile);
+	ret = platform_driver_register(&oprofile_driver);
+	if (ret)
+		goto out;
+
+	oprofile_pdev =	platform_device_register_simple(
+				oprofile_driver.driver.name, 0, NULL, 0);
+	if (IS_ERR(oprofile_pdev)) {
+		ret = PTR_ERR(oprofile_pdev);
+		platform_driver_unregister(&oprofile_driver);
+	}
 
+out:
 	return ret;
 }
 
 static void  exit_driverfs(void)
 {
-	sysdev_unregister(&device_oprofile);
-	sysdev_class_unregister(&oprofile_sysclass);
+	platform_device_unregister(oprofile_pdev);
+	platform_driver_unregister(&oprofile_driver);
 }
 #else
-#define init_driverfs()	do { } while (0)
+static int __init init_driverfs(void) { return 0; }
 #define exit_driverfs() do { } while (0)
 #endif /* CONFIG_PM */
 
-int __init oprofile_arch_init(struct oprofile_operations *ops)
+static int report_trace(struct stackframe *frame, void *d)
 {
-	struct op_arm_model_spec *spec = NULL;
-	int ret = -ENODEV;
+	unsigned int *depth = d;
 
-	ops->backtrace = arm_backtrace;
+	if (*depth) {
+		oprofile_add_trace(frame->pc);
+		(*depth)--;
+	}
 
-#ifdef CONFIG_CPU_XSCALE
-	spec = &op_xscale_spec;
-#endif
+	return *depth == 0;
+}
 
-#ifdef CONFIG_OPROFILE_ARMV6
-	spec = &op_armv6_spec;
-#endif
+/*
+ * The registers we're interested in are at the end of the variable
+ * length saved register structure. The fp points at the end of this
+ * structure so the address of this struct is:
+ * (struct frame_tail *)(xxx->fp)-1
+ */
+struct frame_tail {
+	struct frame_tail *fp;
+	unsigned long sp;
+	unsigned long lr;
+} __attribute__((packed));
 
-#ifdef CONFIG_OPROFILE_MPCORE
-	spec = &op_mpcore_spec;
-#endif
+static struct frame_tail* user_backtrace(struct frame_tail *tail)
+{
+	struct frame_tail buftail[2];
 
-#ifdef CONFIG_OPROFILE_ARMV7
-	spec = &op_armv7_spec;
-#endif
+	/* Also check accessibility of one struct frame_tail beyond */
+	if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
+		return NULL;
+	if (__copy_from_user_inatomic(buftail, tail, sizeof(buftail)))
+		return NULL;
 
-	if (spec) {
-		ret = spec->init();
-		if (ret < 0)
-			return ret;
+	oprofile_add_trace(buftail[0].lr);
 
-		counter_config = kcalloc(spec->num_counters, sizeof(struct op_counter_config),
-					 GFP_KERNEL);
-		if (!counter_config)
-			return -ENOMEM;
+	/* frame pointers should strictly progress back up the stack
+	 * (towards higher addresses) */
+	if (tail >= buftail[0].fp)
+		return NULL;
 
-		op_arm_model = spec;
-		init_driverfs();
-		ops->create_files = op_arm_create_files;
-		ops->setup = op_arm_setup;
-		ops->shutdown = op_arm_stop;
-		ops->start = op_arm_start;
-		ops->stop = op_arm_stop;
-		ops->cpu_type = op_arm_model->name;
-		printk(KERN_INFO "oprofile: using %s\n", spec->name);
+	return buftail[0].fp-1;
+}
+
+static void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
+{
+	struct frame_tail *tail = ((struct frame_tail *) regs->ARM_fp) - 1;
+
+	if (!user_mode(regs)) {
+		struct stackframe frame;
+		frame.fp = regs->ARM_fp;
+		frame.sp = regs->ARM_sp;
+		frame.lr = regs->ARM_lr;
+		frame.pc = regs->ARM_pc;
+		walk_stackframe(&frame, report_trace, &depth);
+		return;
 	}
 
+	while (depth-- && tail && !((unsigned long) tail & 3))
+		tail = user_backtrace(tail);
+}
+
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	int cpu, ret = 0;
+
+	perf_num_counters = armpmu_get_max_events();
+
+	counter_config = kcalloc(perf_num_counters,
+			sizeof(struct op_counter_config), GFP_KERNEL);
+
+	if (!counter_config) {
+		pr_info("oprofile: failed to allocate %d "
+				"counters\n", perf_num_counters);
+		return -ENOMEM;
+	}
+
+	ret = init_driverfs();
+	if (ret) {
+		kfree(counter_config);
+		return ret;
+	}
+
+	for_each_possible_cpu(cpu) {
+		perf_events[cpu] = kcalloc(perf_num_counters,
+				sizeof(struct perf_event *), GFP_KERNEL);
+		if (!perf_events[cpu]) {
+			pr_info("oprofile: failed to allocate %d perf events "
+					"for cpu %d\n", perf_num_counters, cpu);
+			while (--cpu >= 0)
+				kfree(perf_events[cpu]);
+			return -ENOMEM;
+		}
+	}
+
+	ops->backtrace		= arm_backtrace;
+	ops->create_files	= op_arm_create_files;
+	ops->setup		= op_arm_setup;
+	ops->start		= op_arm_start;
+	ops->stop		= op_arm_stop;
+	ops->shutdown		= op_arm_stop;
+	ops->cpu_type		= op_name_from_perf_id(armpmu_get_pmu_id());
+
+	if (!ops->cpu_type)
+		ret = -ENODEV;
+	else
+		pr_info("oprofile: using %s\n", ops->cpu_type);
+
 	return ret;
 }
 
 void oprofile_arch_exit(void)
 {
-	if (op_arm_model) {
+	int cpu, id;
+	struct perf_event *event;
+
+	if (*perf_events) {
 		exit_driverfs();
-		op_arm_model = NULL;
+		for_each_possible_cpu(cpu) {
+			for (id = 0; id < perf_num_counters; ++id) {
+				event = perf_events[cpu][id];
+				if (event != NULL)
+					perf_event_release_kernel(event);
+			}
+			kfree(perf_events[cpu]);
+		}
 	}
-	kfree(counter_config);
+
+	if (counter_config)
+		kfree(counter_config);
 }
+#else
+int __init oprofile_arch_init(struct oprofile_operations *ops)
+{
+	pr_info("oprofile: hardware counters not available\n");
+	return -ENODEV;
+}
+void oprofile_arch_exit(void) {}
+#endif /* CONFIG_HW_PERF_EVENTS */
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/Makefile linux-libre-2.6.35-gnu/arch/arm/oprofile/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -6,9 +6,4 @@
 		oprofilefs.o oprofile_stats.o \
 		timer_int.o )
 
-oprofile-y				:= $(DRIVER_OBJS) common.o backtrace.o
-oprofile-$(CONFIG_CPU_XSCALE)		+= op_model_xscale.o
-oprofile-$(CONFIG_OPROFILE_ARM11_CORE)	+= op_model_arm11_core.o
-oprofile-$(CONFIG_OPROFILE_ARMV6)	+= op_model_v6.o
-oprofile-$(CONFIG_OPROFILE_MPCORE)	+= op_model_mpcore.o
-oprofile-$(CONFIG_OPROFILE_ARMV7)	+= op_model_v7.o
+oprofile-y				:= $(DRIVER_OBJS) common.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/op_arm_model.h linux-libre-2.6.35-gnu/arch/arm/oprofile/op_arm_model.h
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/op_arm_model.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/op_arm_model.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,35 +0,0 @@
-/**
- * @file op_arm_model.h
- * interface to ARM machine specific operations
- *
- * @remark Copyright 2004 Oprofile Authors
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-
-#ifndef OP_ARM_MODEL_H
-#define OP_ARM_MODEL_H
-
-struct op_arm_model_spec {
-	int (*init)(void);
-	unsigned int num_counters;
-	int (*setup_ctrs)(void);
-	int (*start)(void);
-	void (*stop)(void);
-	char *name;
-};
-
-#ifdef CONFIG_CPU_XSCALE
-extern struct op_arm_model_spec op_xscale_spec;
-#endif
-
-extern struct op_arm_model_spec op_armv6_spec;
-extern struct op_arm_model_spec op_mpcore_spec;
-extern struct op_arm_model_spec op_armv7_spec;
-
-extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
-
-extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
-extern void op_arm_exit(void);
-#endif /* OP_ARM_MODEL_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/op_counter.h linux-libre-2.6.35-gnu/arch/arm/oprofile/op_counter.h
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/op_counter.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/op_counter.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,27 +0,0 @@
-/**
- * @file op_counter.h
- *
- * @remark Copyright 2004 Oprofile Authors
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-
-#ifndef OP_COUNTER_H
-#define OP_COUNTER_H
-
-/* Per performance monitor configuration as set via
- * oprofilefs.
- */
-struct op_counter_config {
-	unsigned long count;
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long unit_mask;
-	unsigned long kernel;
-	unsigned long user;
-};
-
-extern struct op_counter_config *counter_config;
-
-#endif /* OP_COUNTER_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_arm11_core.c linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_arm11_core.c
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_arm11_core.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_arm11_core.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,162 +0,0 @@
-/**
- * @file op_model_arm11_core.c
- * ARM11 Event Monitor Driver
- * @remark Copyright 2004 ARM SMP Development Team
- */
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/smp.h>
-
-#include "op_counter.h"
-#include "op_arm_model.h"
-#include "op_model_arm11_core.h"
-
-/*
- * ARM11 PMU support
- */
-static inline void arm11_write_pmnc(u32 val)
-{
-	/* upper 4bits and 7, 11 are write-as-0 */
-	val &= 0x0ffff77f;
-	asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r" (val));
-}
-
-static inline u32 arm11_read_pmnc(void)
-{
-	u32 val;
-	asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r" (val));
-	return val;
-}
-
-static void arm11_reset_counter(unsigned int cnt)
-{
-	u32 val = -(u32)counter_config[CPU_COUNTER(smp_processor_id(), cnt)].count;
-	switch (cnt) {
-	case CCNT:
-		asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r" (val));
-		break;
-
-	case PMN0:
-		asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r" (val));
-		break;
-
-	case PMN1:
-		asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r" (val));
-		break;
-	}
-}
-
-int arm11_setup_pmu(void)
-{
-	unsigned int cnt;
-	u32 pmnc;
-
-	if (arm11_read_pmnc() & PMCR_E) {
-		printk(KERN_ERR "oprofile: CPU%u PMU still enabled when setup new event counter.\n", smp_processor_id());
-		return -EBUSY;
-	}
-
-	/* initialize PMNC, reset overflow, D bit, C bit and P bit. */
-	arm11_write_pmnc(PMCR_OFL_PMN0 | PMCR_OFL_PMN1 | PMCR_OFL_CCNT |
-			 PMCR_C | PMCR_P);
-
-	for (pmnc = 0, cnt = PMN0; cnt <= CCNT; cnt++) {
-		unsigned long event;
-
-		if (!counter_config[CPU_COUNTER(smp_processor_id(), cnt)].enabled)
-			continue;
-
-		event = counter_config[CPU_COUNTER(smp_processor_id(), cnt)].event & 255;
-
-		/*
-		 * Set event (if destined for PMNx counters)
-		 */
-		if (cnt == PMN0) {
-			pmnc |= event << 20;
-		} else if (cnt == PMN1) {
-			pmnc |= event << 12;
-		}
-
-		/*
-		 * We don't need to set the event if it's a cycle count
-		 * Enable interrupt for this counter
-		 */
-		pmnc |= PMCR_IEN_PMN0 << cnt;
-		arm11_reset_counter(cnt);
-	}
-	arm11_write_pmnc(pmnc);
-
-	return 0;
-}
-
-int arm11_start_pmu(void)
-{
-	arm11_write_pmnc(arm11_read_pmnc() | PMCR_E);
-	return 0;
-}
-
-int arm11_stop_pmu(void)
-{
-	unsigned int cnt;
-
-	arm11_write_pmnc(arm11_read_pmnc() & ~PMCR_E);
-
-	for (cnt = PMN0; cnt <= CCNT; cnt++)
-		arm11_reset_counter(cnt);
-
-	return 0;
-}
-
-/*
- * CPU counters' IRQ handler (one IRQ per CPU)
- */
-static irqreturn_t arm11_pmu_interrupt(int irq, void *arg)
-{
-	struct pt_regs *regs = get_irq_regs();
-	unsigned int cnt;
-	u32 pmnc;
-
-	pmnc = arm11_read_pmnc();
-
-	for (cnt = PMN0; cnt <= CCNT; cnt++) {
-		if ((pmnc & (PMCR_OFL_PMN0 << cnt)) && (pmnc & (PMCR_IEN_PMN0 << cnt))) {
-			arm11_reset_counter(cnt);
-			oprofile_add_sample(regs, CPU_COUNTER(smp_processor_id(), cnt));
-		}
-	}
-	/* Clear counter flag(s) */
-	arm11_write_pmnc(pmnc);
-	return IRQ_HANDLED;
-}
-
-int arm11_request_interrupts(const int *irqs, int nr)
-{
-	unsigned int i;
-	int ret = 0;
-
-	for(i = 0; i < nr; i++) {
-		ret = request_irq(irqs[i], arm11_pmu_interrupt, IRQF_DISABLED, "CP15 PMU", NULL);
-		if (ret != 0) {
-			printk(KERN_ERR "oprofile: unable to request IRQ%u for MPCORE-EM\n",
-			       irqs[i]);
-			break;
-		}
-	}
-
-	if (i != nr)
-		while (i-- != 0)
-			free_irq(irqs[i], NULL);
-
-	return ret;
-}
-
-void arm11_release_interrupts(const int *irqs, int nr)
-{
-	unsigned int i;
-
-	for (i = 0; i < nr; i++)
-		free_irq(irqs[i], NULL);
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_arm11_core.h linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_arm11_core.h
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_arm11_core.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_arm11_core.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,45 +0,0 @@
-/**
- * @file op_model_arm11_core.h
- * ARM11 Event Monitor Driver
- * @remark Copyright 2004 ARM SMP Development Team
- * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
- * @remark Copyright 2000-2004 MontaVista Software Inc
- * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
- * @remark Copyright 2004 Intel Corporation
- * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
- * @remark Copyright 2004 Oprofile Authors
- *
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-#ifndef OP_MODEL_ARM11_CORE_H
-#define OP_MODEL_ARM11_CORE_H
-
-/*
- * Per-CPU PMCR
- */
-#define PMCR_E		(1 << 0)	/* Enable */
-#define PMCR_P		(1 << 1)	/* Count reset */
-#define PMCR_C		(1 << 2)	/* Cycle counter reset */
-#define PMCR_D		(1 << 3)	/* Cycle counter counts every 64th cpu cycle */
-#define PMCR_IEN_PMN0	(1 << 4)	/* Interrupt enable count reg 0 */
-#define PMCR_IEN_PMN1	(1 << 5)	/* Interrupt enable count reg 1 */
-#define PMCR_IEN_CCNT	(1 << 6)	/* Interrupt enable cycle counter */
-#define PMCR_OFL_PMN0	(1 << 8)	/* Count reg 0 overflow */
-#define PMCR_OFL_PMN1	(1 << 9)	/* Count reg 1 overflow */
-#define PMCR_OFL_CCNT	(1 << 10)	/* Cycle counter overflow */
-
-#define PMN0 0
-#define PMN1 1
-#define CCNT 2
-
-#define CPU_COUNTER(cpu, counter)	((cpu) * 3 + (counter))
-
-int arm11_setup_pmu(void);
-int arm11_start_pmu(void);
-int arm11_stop_pmu(void);
-int arm11_request_interrupts(const int *, int);
-void arm11_release_interrupts(const int *, int);
-
-#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_mpcore.c linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_mpcore.c
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_mpcore.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_mpcore.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,306 +0,0 @@
-/**
- * @file op_model_mpcore.c
- * MPCORE Event Monitor Driver
- * @remark Copyright 2004 ARM SMP Development Team
- * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
- * @remark Copyright 2000-2004 MontaVista Software Inc
- * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
- * @remark Copyright 2004 Intel Corporation
- * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
- * @remark Copyright 2004 Oprofile Authors
- *
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- *
- *  Counters:
- *    0: PMN0 on CPU0, per-cpu configurable event counter
- *    1: PMN1 on CPU0, per-cpu configurable event counter
- *    2: CCNT on CPU0
- *    3: PMN0 on CPU1
- *    4: PMN1 on CPU1
- *    5: CCNT on CPU1
- *    6: PMN0 on CPU1
- *    7: PMN1 on CPU1
- *    8: CCNT on CPU1
- *    9: PMN0 on CPU1
- *   10: PMN1 on CPU1
- *   11: CCNT on CPU1
- *   12-19: configurable SCU event counters
- */
-
-/* #define DEBUG */
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/board-eb.h>
-#include <asm/system.h>
-#include <asm/pmu.h>
-
-#include "op_counter.h"
-#include "op_arm_model.h"
-#include "op_model_arm11_core.h"
-#include "op_model_mpcore.h"
-
-/*
- * MPCore SCU event monitor support
- */
-#define SCU_EVENTMONITORS_VA_BASE __io_address(REALVIEW_EB11MP_SCU_BASE + 0x10)
-
-/*
- * Bitmask of used SCU counters
- */
-static unsigned int scu_em_used;
-static const struct pmu_irqs *pmu_irqs;
-
-/*
- * 2 helper fns take a counter number from 0-7 (not the userspace-visible counter number)
- */
-static inline void scu_reset_counter(struct eventmonitor __iomem *emc, unsigned int n)
-{
-	writel(-(u32)counter_config[SCU_COUNTER(n)].count, &emc->MC[n]);
-}
-
-static inline void scu_set_event(struct eventmonitor __iomem *emc, unsigned int n, u32 event)
-{
-	event &= 0xff;
-	writeb(event, &emc->MCEB[n]);
-}
-
-/*
- * SCU counters' IRQ handler (one IRQ per counter => 2 IRQs per CPU)
- */
-static irqreturn_t scu_em_interrupt(int irq, void *arg)
-{
-	struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
-	unsigned int cnt;
-
-	cnt = irq - IRQ_EB11MP_PMU_SCU0;
-	oprofile_add_sample(get_irq_regs(), SCU_COUNTER(cnt));
-	scu_reset_counter(emc, cnt);
-
-	/* Clear overflow flag for this counter */
-	writel(1 << (cnt + 16), &emc->PMCR);
-
-	return IRQ_HANDLED;
-}
-
-/* Configure just the SCU counters that the user has requested */
-static void scu_setup(void)
-{
-	struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
-	unsigned int i;
-
-	scu_em_used = 0;
-
-	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
-		if (counter_config[SCU_COUNTER(i)].enabled &&
-		    counter_config[SCU_COUNTER(i)].event) {
-			scu_set_event(emc, i, 0); /* disable counter for now */
-			scu_em_used |= 1 << i;
-		}
-	}
-}
-
-static int scu_start(void)
-{
-	struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
-	unsigned int temp, i;
-	unsigned long event;
-	int ret = 0;
-
-	/*
-	 * request the SCU counter interrupts that we need
-	 */
-	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
-		if (scu_em_used & (1 << i)) {
-			ret = request_irq(IRQ_EB11MP_PMU_SCU0 + i, scu_em_interrupt, IRQF_DISABLED, "SCU PMU", NULL);
-			if (ret) {
-				printk(KERN_ERR "oprofile: unable to request IRQ%u for SCU Event Monitor\n",
-				       IRQ_EB11MP_PMU_SCU0 + i);
-				goto err_free_scu;
-			}
-		}
-	}
-
-	/*
-	 * clear overflow and enable interrupt for all used counters
-	 */
-	temp = readl(&emc->PMCR);
-	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
-		if (scu_em_used & (1 << i)) {
-			scu_reset_counter(emc, i);
-			event = counter_config[SCU_COUNTER(i)].event;
-			scu_set_event(emc, i, event);
-
-			/* clear overflow/interrupt */
-			temp |= 1 << (i + 16);
-			/* enable interrupt*/
-			temp |= 1 << (i + 8);
-		}
-	}
-
-	/* Enable all 8 counters */
-	temp |= PMCR_E;
-	writel(temp, &emc->PMCR);
-
-	return 0;
-
- err_free_scu:
-	while (i--)
-		free_irq(IRQ_EB11MP_PMU_SCU0 + i, NULL);
-	return ret;
-}
-
-static void scu_stop(void)
-{
-	struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
-	unsigned int temp, i;
-
-	/* Disable counter interrupts */
-	/* Don't disable all 8 counters (with the E bit) as they may be in use */
-	temp = readl(&emc->PMCR);
-	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
-		if (scu_em_used & (1 << i))
-			temp &= ~(1 << (i + 8));
-	}
-	writel(temp, &emc->PMCR);
-
-	/* Free counter interrupts and reset counters */
-	for (i = 0; i < NUM_SCU_COUNTERS; i++) {
-		if (scu_em_used & (1 << i)) {
-			scu_reset_counter(emc, i);
-			free_irq(IRQ_EB11MP_PMU_SCU0 + i, NULL);
-		}
-	}
-}
-
-struct em_function_data {
-	int (*fn)(void);
-	int ret;
-};
-
-static void em_func(void *data)
-{
-	struct em_function_data *d = data;
-	int ret = d->fn();
-	if (ret)
-		d->ret = ret;
-}
-
-static int em_call_function(int (*fn)(void))
-{
-	struct em_function_data data;
-
-	data.fn = fn;
-	data.ret = 0;
-
-	preempt_disable();
-	smp_call_function(em_func, &data, 1);
-	em_func(&data);
-	preempt_enable();
-
-	return data.ret;
-}
-
-/*
- * Glue to stick the individual ARM11 PMUs and the SCU
- * into the oprofile framework.
- */
-static int em_setup_ctrs(void)
-{
-	int ret;
-
-	/* Configure CPU counters by cross-calling to the other CPUs */
-	ret = em_call_function(arm11_setup_pmu);
-	if (ret == 0)
-		scu_setup();
-
-	return 0;
-}
-
-static int em_start(void)
-{
-	int ret;
-
-	pmu_irqs = reserve_pmu();
-	if (IS_ERR(pmu_irqs)) {
-		ret = PTR_ERR(pmu_irqs);
-		goto out;
-	}
-
-	ret = arm11_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
-	if (ret == 0) {
-		em_call_function(arm11_start_pmu);
-
-		ret = scu_start();
-		if (ret) {
-			arm11_release_interrupts(pmu_irqs->irqs,
-						 pmu_irqs->num_irqs);
-		} else {
-			release_pmu(pmu_irqs);
-			pmu_irqs = NULL;
-		}
-	}
-
-out:
-	return ret;
-}
-
-static void em_stop(void)
-{
-	em_call_function(arm11_stop_pmu);
-	arm11_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
-	scu_stop();
-	release_pmu(pmu_irqs);
-}
-
-/*
- * Why isn't there a function to route an IRQ to a specific CPU in
- * genirq?
- */
-static void em_route_irq(int irq, unsigned int cpu)
-{
-	struct irq_desc *desc = irq_desc + irq;
-	const struct cpumask *mask = cpumask_of(cpu);
-
-	spin_lock_irq(&desc->lock);
-	cpumask_copy(desc->affinity, mask);
-	desc->chip->set_affinity(irq, mask);
-	spin_unlock_irq(&desc->lock);
-}
-
-static int em_setup(void)
-{
-	/*
-	 * Send SCU PMU interrupts to the "owner" CPU.
-	 */
-	em_route_irq(IRQ_EB11MP_PMU_SCU0, 0);
-	em_route_irq(IRQ_EB11MP_PMU_SCU1, 0);
-	em_route_irq(IRQ_EB11MP_PMU_SCU2, 1);
-	em_route_irq(IRQ_EB11MP_PMU_SCU3, 1);
-	em_route_irq(IRQ_EB11MP_PMU_SCU4, 2);
-	em_route_irq(IRQ_EB11MP_PMU_SCU5, 2);
-	em_route_irq(IRQ_EB11MP_PMU_SCU6, 3);
-	em_route_irq(IRQ_EB11MP_PMU_SCU7, 3);
-
-	return init_pmu();
-}
-
-struct op_arm_model_spec op_mpcore_spec = {
-	.init		= em_setup,
-	.num_counters	= MPCORE_NUM_COUNTERS,
-	.setup_ctrs	= em_setup_ctrs,
-	.start		= em_start,
-	.stop		= em_stop,
-	.name		= "arm/mpcore",
-};
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_mpcore.h linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_mpcore.h
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_mpcore.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_mpcore.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,61 +0,0 @@
-/**
- * @file op_model_mpcore.c
- * MPCORE Event Monitor Driver
- * @remark Copyright 2004 ARM SMP Development Team
- * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
- * @remark Copyright 2000-2004 MontaVista Software Inc
- * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
- * @remark Copyright 2004 Intel Corporation
- * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
- * @remark Copyright 2004 Oprofile Authors
- *
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-#ifndef OP_MODEL_MPCORE_H
-#define OP_MODEL_MPCORE_H
-
-struct eventmonitor {
-	unsigned long PMCR;
-	unsigned char MCEB[8];
-	unsigned long MC[8];
-};
-
-/*
- * List of userspace counter numbers: note that the structure is important.
- * The code relies on CPUn's counters being CPU0's counters + 3n
- * and on CPU0's counters starting at 0
- */
-
-#define COUNTER_CPU0_PMN0 0
-#define COUNTER_CPU0_PMN1 1
-#define COUNTER_CPU0_CCNT 2
-
-#define COUNTER_CPU1_PMN0 3
-#define COUNTER_CPU1_PMN1 4
-#define COUNTER_CPU1_CCNT 5
-
-#define COUNTER_CPU2_PMN0 6
-#define COUNTER_CPU2_PMN1 7
-#define COUNTER_CPU2_CCNT 8
-
-#define COUNTER_CPU3_PMN0 9
-#define COUNTER_CPU3_PMN1 10
-#define COUNTER_CPU3_CCNT 11
-
-#define COUNTER_SCU_MN0 12
-#define COUNTER_SCU_MN1 13
-#define COUNTER_SCU_MN2 14
-#define COUNTER_SCU_MN3 15
-#define COUNTER_SCU_MN4 16
-#define COUNTER_SCU_MN5 17
-#define COUNTER_SCU_MN6 18
-#define COUNTER_SCU_MN7 19
-#define NUM_SCU_COUNTERS 8
-
-#define SCU_COUNTER(number)	((number) + COUNTER_SCU_MN0)
-
-#define MPCORE_NUM_COUNTERS	SCU_COUNTER(NUM_SCU_COUNTERS)
-
-#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_v6.c linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_v6.c
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_v6.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_v6.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,78 +0,0 @@
-/**
- * @file op_model_v6.c
- * ARM11 Performance Monitor Driver
- *
- * Based on op_model_xscale.c
- *
- * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
- * @remark Copyright 2000-2004 MontaVista Software Inc
- * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
- * @remark Copyright 2004 Intel Corporation
- * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
- * @remark Copyright 2004 OProfile Authors
- *
- * @remark Read the file COPYING
- *
- * @author Tony Lindgren <tony@atomide.com>
- */
-
-/* #define DEBUG */
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/pmu.h>
-
-#include "op_counter.h"
-#include "op_arm_model.h"
-#include "op_model_arm11_core.h"
-
-static const struct pmu_irqs *pmu_irqs;
-
-static void armv6_pmu_stop(void)
-{
-	arm11_stop_pmu();
-	arm11_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
-	release_pmu(pmu_irqs);
-	pmu_irqs = NULL;
-}
-
-static int armv6_pmu_start(void)
-{
-	int ret;
-
-	pmu_irqs = reserve_pmu();
-	if (IS_ERR(pmu_irqs)) {
-		ret = PTR_ERR(pmu_irqs);
-		goto out;
-	}
-
-	ret = arm11_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
-	if (ret >= 0) {
-		ret = arm11_start_pmu();
-	} else {
-		release_pmu(pmu_irqs);
-		pmu_irqs = NULL;
-	}
-
-out:
-	return ret;
-}
-
-static int armv6_detect_pmu(void)
-{
-	return 0;
-}
-
-struct op_arm_model_spec op_armv6_spec = {
-	.init		= armv6_detect_pmu,
-	.num_counters	= 3,
-	.setup_ctrs	= arm11_setup_pmu,
-	.start		= armv6_pmu_start,
-	.stop		= armv6_pmu_stop,
-	.name		= "arm/armv6",
-};
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_v7.c linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_v7.c
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_v7.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_v7.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,415 +0,0 @@
-/**
- * op_model_v7.c
- * ARM V7 (Cortex A8) Event Monitor Driver
- *
- * Copyright 2008 Jean Pihet <jpihet@mvista.com>
- * Copyright 2004 ARM SMP Development Team
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/smp.h>
-
-#include <asm/pmu.h>
-
-#include "op_counter.h"
-#include "op_arm_model.h"
-#include "op_model_v7.h"
-
-/* #define DEBUG */
-
-
-/*
- * ARM V7 PMNC support
- */
-
-static u32 cnt_en[CNTMAX];
-
-static inline void armv7_pmnc_write(u32 val)
-{
-	val &= PMNC_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r" (val));
-}
-
-static inline u32 armv7_pmnc_read(void)
-{
-	u32 val;
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
-	return val;
-}
-
-static inline u32 armv7_pmnc_enable_counter(unsigned int cnt)
-{
-	u32 val;
-
-	if (cnt >= CNTMAX) {
-		printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
-			" %d\n", smp_processor_id(), cnt);
-		return -1;
-	}
-
-	if (cnt == CCNT)
-		val = CNTENS_C;
-	else
-		val = (1 << (cnt - CNT0));
-
-	val &= CNTENS_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-
-	return cnt;
-}
-
-static inline u32 armv7_pmnc_disable_counter(unsigned int cnt)
-{
-	u32 val;
-
-	if (cnt >= CNTMAX) {
-		printk(KERN_ERR "oprofile: CPU%u disabling wrong PMNC counter"
-			" %d\n", smp_processor_id(), cnt);
-		return -1;
-	}
-
-	if (cnt == CCNT)
-		val = CNTENC_C;
-	else
-		val = (1 << (cnt - CNT0));
-
-	val &= CNTENC_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-
-	return cnt;
-}
-
-static inline u32 armv7_pmnc_enable_intens(unsigned int cnt)
-{
-	u32 val;
-
-	if (cnt >= CNTMAX) {
-		printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
-			" interrupt enable %d\n", smp_processor_id(), cnt);
-		return -1;
-	}
-
-	if (cnt == CCNT)
-		val = INTENS_C;
-	else
-		val = (1 << (cnt - CNT0));
-
-	val &= INTENS_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-
-	return cnt;
-}
-
-static inline u32 armv7_pmnc_getreset_flags(void)
-{
-	u32 val;
-
-	/* Read */
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-
-	/* Write to clear flags */
-	val &= FLAG_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
-
-	return val;
-}
-
-static inline int armv7_pmnc_select_counter(unsigned int cnt)
-{
-	u32 val;
-
-	if ((cnt == CCNT) || (cnt >= CNTMAX)) {
-		printk(KERN_ERR "oprofile: CPU%u selecting wrong PMNC counteri"
-			" %d\n", smp_processor_id(), cnt);
-		return -1;
-	}
-
-	val = (cnt - CNT0) & SELECT_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
-
-	return cnt;
-}
-
-static inline void armv7_pmnc_write_evtsel(unsigned int cnt, u32 val)
-{
-	if (armv7_pmnc_select_counter(cnt) == cnt) {
-		val &= EVTSEL_MASK;
-		asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
-	}
-}
-
-static void armv7_pmnc_reset_counter(unsigned int cnt)
-{
-	u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
-	u32 val = -(u32)counter_config[cpu_cnt].count;
-
-	switch (cnt) {
-	case CCNT:
-		armv7_pmnc_disable_counter(cnt);
-
-		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (val));
-
-		if (cnt_en[cnt] != 0)
-		    armv7_pmnc_enable_counter(cnt);
-
-		break;
-
-	case CNT0:
-	case CNT1:
-	case CNT2:
-	case CNT3:
-		armv7_pmnc_disable_counter(cnt);
-
-		if (armv7_pmnc_select_counter(cnt) == cnt)
-		    asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (val));
-
-		if (cnt_en[cnt] != 0)
-		    armv7_pmnc_enable_counter(cnt);
-
-		break;
-
-	default:
-		printk(KERN_ERR "oprofile: CPU%u resetting wrong PMNC counter"
-			" %d\n", smp_processor_id(), cnt);
-		break;
-	}
-}
-
-int armv7_setup_pmnc(void)
-{
-	unsigned int cnt;
-
-	if (armv7_pmnc_read() & PMNC_E) {
-		printk(KERN_ERR "oprofile: CPU%u PMNC still enabled when setup"
-			" new event counter.\n", smp_processor_id());
-		return -EBUSY;
-	}
-
-	/* Initialize & Reset PMNC: C bit and P bit */
-	armv7_pmnc_write(PMNC_P | PMNC_C);
-
-
-	for (cnt = CCNT; cnt < CNTMAX; cnt++) {
-		unsigned long event;
-		u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
-
-		/*
-		 * Disable counter
-		 */
-		armv7_pmnc_disable_counter(cnt);
-		cnt_en[cnt] = 0;
-
-		if (!counter_config[cpu_cnt].enabled)
-			continue;
-
-		event = counter_config[cpu_cnt].event & 255;
-
-		/*
-		 * Set event (if destined for PMNx counters)
-		 * We don't need to set the event if it's a cycle count
-		 */
-		if (cnt != CCNT)
-			armv7_pmnc_write_evtsel(cnt, event);
-
-		/*
-		 * Enable interrupt for this counter
-		 */
-		armv7_pmnc_enable_intens(cnt);
-
-		/*
-		 * Reset counter
-		 */
-		armv7_pmnc_reset_counter(cnt);
-
-		/*
-		 * Enable counter
-		 */
-		armv7_pmnc_enable_counter(cnt);
-		cnt_en[cnt] = 1;
-	}
-
-	return 0;
-}
-
-static inline void armv7_start_pmnc(void)
-{
-	armv7_pmnc_write(armv7_pmnc_read() | PMNC_E);
-}
-
-static inline void armv7_stop_pmnc(void)
-{
-	armv7_pmnc_write(armv7_pmnc_read() & ~PMNC_E);
-}
-
-/*
- * CPU counters' IRQ handler (one IRQ per CPU)
- */
-static irqreturn_t armv7_pmnc_interrupt(int irq, void *arg)
-{
-	struct pt_regs *regs = get_irq_regs();
-	unsigned int cnt;
-	u32 flags;
-
-
-	/*
-	 * Stop IRQ generation
-	 */
-	armv7_stop_pmnc();
-
-	/*
-	 * Get and reset overflow status flags
-	 */
-	flags = armv7_pmnc_getreset_flags();
-
-	/*
-	 * Cycle counter
-	 */
-	if (flags & FLAG_C) {
-		u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), CCNT);
-		armv7_pmnc_reset_counter(CCNT);
-		oprofile_add_sample(regs, cpu_cnt);
-	}
-
-	/*
-	 * PMNC counters 0:3
-	 */
-	for (cnt = CNT0; cnt < CNTMAX; cnt++) {
-		if (flags & (1 << (cnt - CNT0))) {
-			u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
-			armv7_pmnc_reset_counter(cnt);
-			oprofile_add_sample(regs, cpu_cnt);
-		}
-	}
-
-	/*
-	 * Allow IRQ generation
-	 */
-	armv7_start_pmnc();
-
-	return IRQ_HANDLED;
-}
-
-int armv7_request_interrupts(const int *irqs, int nr)
-{
-	unsigned int i;
-	int ret = 0;
-
-	for (i = 0; i < nr; i++) {
-		ret = request_irq(irqs[i], armv7_pmnc_interrupt,
-				IRQF_DISABLED, "CP15 PMNC", NULL);
-		if (ret != 0) {
-			printk(KERN_ERR "oprofile: unable to request IRQ%u"
-				" for ARMv7\n",
-			       irqs[i]);
-			break;
-		}
-	}
-
-	if (i != nr)
-		while (i-- != 0)
-			free_irq(irqs[i], NULL);
-
-	return ret;
-}
-
-void armv7_release_interrupts(const int *irqs, int nr)
-{
-	unsigned int i;
-
-	for (i = 0; i < nr; i++)
-		free_irq(irqs[i], NULL);
-}
-
-#ifdef DEBUG
-static void armv7_pmnc_dump_regs(void)
-{
-	u32 val;
-	unsigned int cnt;
-
-	printk(KERN_INFO "PMNC registers dump:\n");
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
-	printk(KERN_INFO "PMNC  =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
-	printk(KERN_INFO "CNTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
-	printk(KERN_INFO "INTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-	printk(KERN_INFO "FLAGS =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
-	printk(KERN_INFO "SELECT=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
-	printk(KERN_INFO "CCNT  =0x%08x\n", val);
-
-	for (cnt = CNT0; cnt < CNTMAX; cnt++) {
-		armv7_pmnc_select_counter(cnt);
-		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
-		printk(KERN_INFO "CNT[%d] count =0x%08x\n", cnt-CNT0, val);
-		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
-		printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", cnt-CNT0, val);
-	}
-}
-#endif
-
-static const struct pmu_irqs *pmu_irqs;
-
-static void armv7_pmnc_stop(void)
-{
-#ifdef DEBUG
-	armv7_pmnc_dump_regs();
-#endif
-	armv7_stop_pmnc();
-	armv7_release_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
-	release_pmu(pmu_irqs);
-	pmu_irqs = NULL;
-}
-
-static int armv7_pmnc_start(void)
-{
-	int ret;
-
-	pmu_irqs = reserve_pmu();
-	if (IS_ERR(pmu_irqs))
-		return PTR_ERR(pmu_irqs);
-
-#ifdef DEBUG
-	armv7_pmnc_dump_regs();
-#endif
-	ret = armv7_request_interrupts(pmu_irqs->irqs, pmu_irqs->num_irqs);
-	if (ret >= 0) {
-		armv7_start_pmnc();
-	} else {
-		release_pmu(pmu_irqs);
-		pmu_irqs = NULL;
-	}
-
-	return ret;
-}
-
-static int armv7_detect_pmnc(void)
-{
-	return 0;
-}
-
-struct op_arm_model_spec op_armv7_spec = {
-	.init		= armv7_detect_pmnc,
-	.num_counters	= 5,
-	.setup_ctrs	= armv7_setup_pmnc,
-	.start		= armv7_pmnc_start,
-	.stop		= armv7_pmnc_stop,
-	.name		= "arm/armv7",
-};
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_v7.h linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_v7.h
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_v7.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_v7.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,103 +0,0 @@
-/**
- * op_model_v7.h
- * ARM v7 (Cortex A8) Event Monitor Driver
- *
- * Copyright 2008 Jean Pihet <jpihet@mvista.com>
- * Copyright 2004 ARM SMP Development Team
- * Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
- * Copyright 2000-2004 MontaVista Software Inc
- * Copyright 2004 Dave Jiang <dave.jiang@intel.com>
- * Copyright 2004 Intel Corporation
- * Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
- * Copyright 2004 Oprofile Authors
- *
- * Read the file COPYING
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef OP_MODEL_V7_H
-#define OP_MODEL_V7_H
-
-/*
- * Per-CPU PMNC: config reg
- */
-#define PMNC_E		(1 << 0)	/* Enable all counters */
-#define PMNC_P		(1 << 1)	/* Reset all counters */
-#define PMNC_C		(1 << 2)	/* Cycle counter reset */
-#define PMNC_D		(1 << 3)	/* CCNT counts every 64th cpu cycle */
-#define PMNC_X		(1 << 4)	/* Export to ETM */
-#define PMNC_DP		(1 << 5)	/* Disable CCNT if non-invasive debug*/
-#define	PMNC_MASK	0x3f		/* Mask for writable bits */
-
-/*
- * Available counters
- */
-#define CCNT 		0
-#define CNT0 		1
-#define CNT1 		2
-#define CNT2 		3
-#define CNT3 		4
-#define CNTMAX 		5
-
-#define CPU_COUNTER(cpu, counter)	((cpu) * CNTMAX + (counter))
-
-/*
- * CNTENS: counters enable reg
- */
-#define CNTENS_P0	(1 << 0)
-#define CNTENS_P1	(1 << 1)
-#define CNTENS_P2	(1 << 2)
-#define CNTENS_P3	(1 << 3)
-#define CNTENS_C	(1 << 31)
-#define	CNTENS_MASK	0x8000000f	/* Mask for writable bits */
-
-/*
- * CNTENC: counters disable reg
- */
-#define CNTENC_P0	(1 << 0)
-#define CNTENC_P1	(1 << 1)
-#define CNTENC_P2	(1 << 2)
-#define CNTENC_P3	(1 << 3)
-#define CNTENC_C	(1 << 31)
-#define	CNTENC_MASK	0x8000000f	/* Mask for writable bits */
-
-/*
- * INTENS: counters overflow interrupt enable reg
- */
-#define INTENS_P0	(1 << 0)
-#define INTENS_P1	(1 << 1)
-#define INTENS_P2	(1 << 2)
-#define INTENS_P3	(1 << 3)
-#define INTENS_C	(1 << 31)
-#define	INTENS_MASK	0x8000000f	/* Mask for writable bits */
-
-/*
- * EVTSEL: Event selection reg
- */
-#define	EVTSEL_MASK	0x7f		/* Mask for writable bits */
-
-/*
- * SELECT: Counter selection reg
- */
-#define	SELECT_MASK	0x1f		/* Mask for writable bits */
-
-/*
- * FLAG: counters overflow flag status reg
- */
-#define FLAG_P0		(1 << 0)
-#define FLAG_P1		(1 << 1)
-#define FLAG_P2		(1 << 2)
-#define FLAG_P3		(1 << 3)
-#define FLAG_C		(1 << 31)
-#define	FLAG_MASK	0x8000000f	/* Mask for writable bits */
-
-
-int armv7_setup_pmu(void);
-int armv7_start_pmu(void);
-int armv7_stop_pmu(void);
-int armv7_request_interrupts(const int *, int);
-void armv7_release_interrupts(const int *, int);
-
-#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_xscale.c linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_xscale.c
--- linux-libre-2.6.34-gnu/arch/arm/oprofile/op_model_xscale.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/oprofile/op_model_xscale.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,444 +0,0 @@
-/**
- * @file op_model_xscale.c
- * XScale Performance Monitor Driver
- *
- * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
- * @remark Copyright 2000-2004 MontaVista Software Inc
- * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
- * @remark Copyright 2004 Intel Corporation
- * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
- * @remark Copyright 2004 OProfile Authors
- *
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-
-/* #define DEBUG */
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/oprofile.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/cputype.h>
-#include <asm/pmu.h>
-
-#include "op_counter.h"
-#include "op_arm_model.h"
-
-#define	PMU_ENABLE	0x001	/* Enable counters */
-#define PMN_RESET	0x002	/* Reset event counters */
-#define	CCNT_RESET	0x004	/* Reset clock counter */
-#define	PMU_RESET	(CCNT_RESET | PMN_RESET)
-#define PMU_CNT64	0x008	/* Make CCNT count every 64th cycle */
-
-/*
- * Different types of events that can be counted by the XScale PMU
- * as used by Oprofile userspace. Here primarily for documentation
- * purposes.
- */
-
-#define EVT_ICACHE_MISS			0x00
-#define	EVT_ICACHE_NO_DELIVER		0x01
-#define	EVT_DATA_STALL			0x02
-#define	EVT_ITLB_MISS			0x03
-#define	EVT_DTLB_MISS			0x04
-#define	EVT_BRANCH			0x05
-#define	EVT_BRANCH_MISS			0x06
-#define	EVT_INSTRUCTION			0x07
-#define	EVT_DCACHE_FULL_STALL		0x08
-#define	EVT_DCACHE_FULL_STALL_CONTIG	0x09
-#define	EVT_DCACHE_ACCESS		0x0A
-#define	EVT_DCACHE_MISS			0x0B
-#define	EVT_DCACE_WRITE_BACK		0x0C
-#define	EVT_PC_CHANGED			0x0D
-#define	EVT_BCU_REQUEST			0x10
-#define	EVT_BCU_FULL			0x11
-#define	EVT_BCU_DRAIN			0x12
-#define	EVT_BCU_ECC_NO_ELOG		0x14
-#define	EVT_BCU_1_BIT_ERR		0x15
-#define	EVT_RMW				0x16
-/* EVT_CCNT is not hardware defined */
-#define EVT_CCNT			0xFE
-#define EVT_UNUSED			0xFF
-
-struct pmu_counter {
-	volatile unsigned long ovf;
-	unsigned long reset_counter;
-};
-
-enum { CCNT, PMN0, PMN1, PMN2, PMN3, MAX_COUNTERS };
-
-static struct pmu_counter results[MAX_COUNTERS];
-
-/*
- * There are two versions of the PMU in current XScale processors
- * with differing register layouts and number of performance counters.
- * e.g. IOP32x is xsc1 whilst IOP33x is xsc2.
- * We detect which register layout to use in xscale_detect_pmu()
- */
-enum { PMU_XSC1, PMU_XSC2 };
-
-struct pmu_type {
-	int id;
-	char *name;
-	int num_counters;
-	unsigned int int_enable;
-	unsigned int cnt_ovf[MAX_COUNTERS];
-	unsigned int int_mask[MAX_COUNTERS];
-};
-
-static struct pmu_type pmu_parms[] = {
-	{
-		.id		= PMU_XSC1,
-		.name		= "arm/xscale1",
-		.num_counters	= 3,
-		.int_mask	= { [PMN0] = 0x10, [PMN1] = 0x20,
-				    [CCNT] = 0x40 },
-		.cnt_ovf	= { [CCNT] = 0x400, [PMN0] = 0x100,
-				    [PMN1] = 0x200},
-	},
-	{
-		.id		= PMU_XSC2,
-		.name		= "arm/xscale2",
-		.num_counters	= 5,
-		.int_mask	= { [CCNT] = 0x01, [PMN0] = 0x02,
-				    [PMN1] = 0x04, [PMN2] = 0x08,
-				    [PMN3] = 0x10 },
-		.cnt_ovf	= { [CCNT] = 0x01, [PMN0] = 0x02,
-				    [PMN1] = 0x04, [PMN2] = 0x08,
-				    [PMN3] = 0x10 },
-	},
-};
-
-static struct pmu_type *pmu;
-
-static void write_pmnc(u32 val)
-{
-	if (pmu->id == PMU_XSC1) {
-		/* upper 4bits and 7, 11 are write-as-0 */
-		val &= 0xffff77f;
-		__asm__ __volatile__ ("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
-	} else {
-		/* bits 4-23 are write-as-0, 24-31 are write ignored */
-		val &= 0xf;
-		__asm__ __volatile__ ("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
-	}
-}
-
-static u32 read_pmnc(void)
-{
-	u32 val;
-
-	if (pmu->id == PMU_XSC1)
-		__asm__ __volatile__ ("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
-	else {
-		__asm__ __volatile__ ("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
-		/* bits 1-2 and 4-23 are read-unpredictable */
-		val &= 0xff000009;
-	}
-
-	return val;
-}
-
-static u32 __xsc1_read_counter(int counter)
-{
-	u32 val = 0;
-
-	switch (counter) {
-	case CCNT:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
-		break;
-	case PMN0:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
-		break;
-	case PMN1:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
-		break;
-	}
-	return val;
-}
-
-static u32 __xsc2_read_counter(int counter)
-{
-	u32 val = 0;
-
-	switch (counter) {
-	case CCNT:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
-		break;
-	case PMN0:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
-		break;
-	case PMN1:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
-		break;
-	case PMN2:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
-		break;
-	case PMN3:
-		__asm__ __volatile__ ("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
-		break;
-	}
-	return val;
-}
-
-static u32 read_counter(int counter)
-{
-	u32 val;
-
-	if (pmu->id == PMU_XSC1)
-		val = __xsc1_read_counter(counter);
-	else
-		val = __xsc2_read_counter(counter);
-
-	return val;
-}
-
-static void __xsc1_write_counter(int counter, u32 val)
-{
-	switch (counter) {
-	case CCNT:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
-		break;
-	case PMN0:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
-		break;
-	case PMN1:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
-		break;
-	}
-}
-
-static void __xsc2_write_counter(int counter, u32 val)
-{
-	switch (counter) {
-	case CCNT:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
-		break;
-	case PMN0:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
-		break;
-	case PMN1:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
-		break;
-	case PMN2:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
-		break;
-	case PMN3:
-		__asm__ __volatile__ ("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
-		break;
-	}
-}
-
-static void write_counter(int counter, u32 val)
-{
-	if (pmu->id == PMU_XSC1)
-		__xsc1_write_counter(counter, val);
-	else
-		__xsc2_write_counter(counter, val);
-}
-
-static int xscale_setup_ctrs(void)
-{
-	u32 evtsel, pmnc;
-	int i;
-
-	for (i = CCNT; i < MAX_COUNTERS; i++) {
-		if (counter_config[i].enabled)
-			continue;
-
-		counter_config[i].event = EVT_UNUSED;
-	}
-
-	switch (pmu->id) {
-	case PMU_XSC1:
-		pmnc = (counter_config[PMN1].event << 20) | (counter_config[PMN0].event << 12);
-		pr_debug("xscale_setup_ctrs: pmnc: %#08x\n", pmnc);
-		write_pmnc(pmnc);
-		break;
-
-	case PMU_XSC2:
-		evtsel = counter_config[PMN0].event | (counter_config[PMN1].event << 8) |
-			(counter_config[PMN2].event << 16) | (counter_config[PMN3].event << 24);
-
-		pr_debug("xscale_setup_ctrs: evtsel %#08x\n", evtsel);
-		__asm__ __volatile__ ("mcr p14, 0, %0, c8, c1, 0" : : "r" (evtsel));
-		break;
-	}
-
-	for (i = CCNT; i < MAX_COUNTERS; i++) {
-		if (counter_config[i].event == EVT_UNUSED) {
-			counter_config[i].event = 0;
-			pmu->int_enable &= ~pmu->int_mask[i];
-			continue;
-		}
-
-		results[i].reset_counter = counter_config[i].count;
-		write_counter(i, -(u32)counter_config[i].count);
-		pmu->int_enable |= pmu->int_mask[i];
-		pr_debug("xscale_setup_ctrs: counter%d %#08x from %#08lx\n", i,
-			read_counter(i), counter_config[i].count);
-	}
-
-	return 0;
-}
-
-static void inline __xsc1_check_ctrs(void)
-{
-	int i;
-	u32 pmnc = read_pmnc();
-
-	/* NOTE: there's an A stepping errata that states if an overflow */
-	/*       bit already exists and another occurs, the previous     */
-	/*       Overflow bit gets cleared. There's no workaround.	 */
-	/*	 Fixed in B stepping or later			 	 */
-
-	/* Write the value back to clear the overflow flags. Overflow */
-	/* flags remain in pmnc for use below */
-	write_pmnc(pmnc & ~PMU_ENABLE);
-
-	for (i = CCNT; i <= PMN1; i++) {
-		if (!(pmu->int_mask[i] & pmu->int_enable))
-			continue;
-
-		if (pmnc & pmu->cnt_ovf[i])
-			results[i].ovf++;
-	}
-}
-
-static void inline __xsc2_check_ctrs(void)
-{
-	int i;
-	u32 flag = 0, pmnc = read_pmnc();
-
-	pmnc &= ~PMU_ENABLE;
-	write_pmnc(pmnc);
-
-	/* read overflow flag register */
-	__asm__ __volatile__ ("mrc p14, 0, %0, c5, c1, 0" : "=r" (flag));
-
-	for (i = CCNT; i <= PMN3; i++) {
-		if (!(pmu->int_mask[i] & pmu->int_enable))
-			continue;
-
-		if (flag & pmu->cnt_ovf[i])
-			results[i].ovf++;
-	}
-
-	/* writeback clears overflow bits */
-	__asm__ __volatile__ ("mcr p14, 0, %0, c5, c1, 0" : : "r" (flag));
-}
-
-static irqreturn_t xscale_pmu_interrupt(int irq, void *arg)
-{
-	int i;
-	u32 pmnc;
-
-	if (pmu->id == PMU_XSC1)
-		__xsc1_check_ctrs();
-	else
-		__xsc2_check_ctrs();
-
-	for (i = CCNT; i < MAX_COUNTERS; i++) {
-		if (!results[i].ovf)
-			continue;
-
-		write_counter(i, -(u32)results[i].reset_counter);
-		oprofile_add_sample(get_irq_regs(), i);
-		results[i].ovf--;
-	}
-
-	pmnc = read_pmnc() | PMU_ENABLE;
-	write_pmnc(pmnc);
-
-	return IRQ_HANDLED;
-}
-
-static const struct pmu_irqs *pmu_irqs;
-
-static void xscale_pmu_stop(void)
-{
-	u32 pmnc = read_pmnc();
-
-	pmnc &= ~PMU_ENABLE;
-	write_pmnc(pmnc);
-
-	free_irq(pmu_irqs->irqs[0], results);
-	release_pmu(pmu_irqs);
-	pmu_irqs = NULL;
-}
-
-static int xscale_pmu_start(void)
-{
-	int ret;
-	u32 pmnc;
-
-	pmu_irqs = reserve_pmu();
-	if (IS_ERR(pmu_irqs))
-		return PTR_ERR(pmu_irqs);
-
-	pmnc = read_pmnc();
-
-	ret = request_irq(pmu_irqs->irqs[0], xscale_pmu_interrupt,
-			  IRQF_DISABLED, "XScale PMU", (void *)results);
-
-	if (ret < 0) {
-		printk(KERN_ERR "oprofile: unable to request IRQ%d for XScale PMU\n",
-		       pmu_irqs->irqs[0]);
-		release_pmu(pmu_irqs);
-		pmu_irqs = NULL;
-		return ret;
-	}
-
-	if (pmu->id == PMU_XSC1)
-		pmnc |= pmu->int_enable;
-	else {
-		__asm__ __volatile__ ("mcr p14, 0, %0, c4, c1, 0" : : "r" (pmu->int_enable));
-		pmnc &= ~PMU_CNT64;
-	}
-
-	pmnc |= PMU_ENABLE;
-	write_pmnc(pmnc);
-	pr_debug("xscale_pmu_start: pmnc: %#08x mask: %08x\n", pmnc, pmu->int_enable);
-	return 0;
-}
-
-static int xscale_detect_pmu(void)
-{
-	int ret = 0;
-	u32 id;
-
-	id = (read_cpuid(CPUID_ID) >> 13) & 0x7;
-
-	switch (id) {
-	case 1:
-		pmu = &pmu_parms[PMU_XSC1];
-		break;
-	case 2:
-		pmu = &pmu_parms[PMU_XSC2];
-		break;
-	default:
-		ret = -ENODEV;
-		break;
-	}
-
-	if (!ret) {
-		op_xscale_spec.name = pmu->name;
-		op_xscale_spec.num_counters = pmu->num_counters;
-		pr_debug("xscale_detect_pmu: detected %s PMU\n", pmu->name);
-	}
-
-	return ret;
-}
-
-struct op_arm_model_spec op_xscale_spec = {
-	.init		= xscale_detect_pmu,
-	.setup_ctrs	= xscale_setup_ctrs,
-	.start		= xscale_pmu_start,
-	.stop		= xscale_pmu_stop,
-};
-
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-iop/Makefile linux-libre-2.6.35-gnu/arch/arm/plat-iop/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/plat-iop/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-iop/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -13,6 +13,7 @@
 obj-$(CONFIG_ARCH_IOP32X) += io.o
 obj-$(CONFIG_ARCH_IOP32X) += cp6.o
 obj-$(CONFIG_ARCH_IOP32X) += adma.o
+obj-$(CONFIG_ARCH_IOP32X) += pmu.o
 
 # IOP33X
 obj-$(CONFIG_ARCH_IOP33X) += gpio.o
@@ -23,6 +24,7 @@
 obj-$(CONFIG_ARCH_IOP33X) += io.o
 obj-$(CONFIG_ARCH_IOP33X) += cp6.o
 obj-$(CONFIG_ARCH_IOP33X) += adma.o
+obj-$(CONFIG_ARCH_IOP33X) += pmu.o
 
 # IOP13XX
 obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-iop/pmu.c linux-libre-2.6.35-gnu/arch/arm/plat-iop/pmu.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-iop/pmu.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-iop/pmu.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,40 @@
+/*
+ * PMU IRQ registration for the iop3xx xscale PMU families.
+ * Copyright (C) 2010 Will Deacon, ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/pmu.h>
+#include <mach/irqs.h>
+
+static struct resource pmu_resource = {
+#ifdef CONFIG_ARCH_IOP32X
+	.start	= IRQ_IOP32X_CORE_PMU,
+	.end	= IRQ_IOP32X_CORE_PMU,
+#endif
+#ifdef CONFIG_ARCH_IOP33X
+	.start	= IRQ_IOP33X_CORE_PMU,
+	.end	= IRQ_IOP33X_CORE_PMU,
+#endif
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.resource	= &pmu_resource,
+	.num_resources	= 1,
+};
+
+static int __init iop3xx_pmu_init(void)
+{
+	platform_device_register(&pmu_device);
+	return 0;
+}
+
+arch_initcall(iop3xx_pmu_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-mxc/ehci.c linux-libre-2.6.35-gnu/arch/arm/plat-mxc/ehci.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-mxc/ehci.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-mxc/ehci.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -50,7 +51,26 @@
 #define MX35_H1_TLL_BIT		(1 << 5)
 #define MX35_H1_USBTE_BIT	(1 << 4)
 
-int mxc_set_usbcontrol(int port, unsigned int flags)
+#define MXC_OTG_OFFSET		0
+#define MXC_H1_OFFSET		0x200
+
+/* USB_CTRL */
+#define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
+#define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
+#define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
+#define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
+#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)		/* HOST1 power mask */
+
+/* USB_PHY_CTRL_FUNC */
+#define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
+#define MXC_H1_OC_DIS_BIT			(1 << 5)	/* UH1 Disable Overcurrent Event */
+
+#define MXC_USBCMD_OFFSET			0x140
+
+/* USBCMD */
+#define MXC_UCMD_ITC_NO_THRESHOLD_MASK	(~(0xff << 16))	/* Interrupt Threshold Control */
+
+int mxc_initialize_usb_hw(int port, unsigned int flags)
 {
 	unsigned int v;
 #ifdef CONFIG_ARCH_MX3
@@ -186,9 +206,85 @@
 		return 0;
 	}
 #endif /* CONFIG_MACH_MX27 */
+#ifdef CONFIG_ARCH_MX51
+	if (cpu_is_mx51()) {
+		void __iomem *usb_base;
+		u32 usbotg_base;
+		u32 usbother_base;
+		int ret = 0;
+
+		usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+
+		switch (port) {
+		case 0:	/* OTG port */
+			usbotg_base = usb_base + MXC_OTG_OFFSET;
+			break;
+		case 1:	/* Host 1 port */
+			usbotg_base = usb_base + MXC_H1_OFFSET;
+			break;
+		default:
+			printk(KERN_ERR"%s no such port %d\n", __func__, port);
+			ret = -ENOENT;
+			goto error;
+		}
+		usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
+
+		switch (port) {
+		case 0:	/*OTG port */
+			if (flags & MXC_EHCI_INTERNAL_PHY) {
+				v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+				if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+					v |= (MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is not used */
+				else
+					v &= ~(MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is used */
+				__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+				v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+				if (flags & MXC_EHCI_WAKEUP_ENABLED)
+					v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
+				else
+					v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
+				__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
+			}
+			break;
+		case 1:	/* Host 1 */
+			/*Host ULPI */
+			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
+			if (flags & MXC_EHCI_WAKEUP_ENABLED)
+				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */
+			else
+				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */
+
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+			else
+				v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
+			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
+
+			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
+			else
+				v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
+			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
+
+			v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
+			if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
+				/* Interrupt Threshold Control:Immediate (no threshold) */
+				v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
+			__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
+			break;
+		}
+
+error:
+		iounmap(usb_base);
+		return ret;
+	}
+#endif
 	printk(KERN_WARNING
 		"%s() unable to setup USBCONTROL for this CPU\n", __func__);
 	return -EINVAL;
 }
-EXPORT_SYMBOL(mxc_set_usbcontrol);
+EXPORT_SYMBOL(mxc_initialize_usb_hw);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-mxc/gpio.c linux-libre-2.6.35-gnu/arch/arm/plat-mxc/gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-mxc/gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-mxc/gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -3,7 +3,7 @@
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
  *
  * Based on code from Freescale,
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -38,7 +38,6 @@
 #define GPIO_ICR2	(cpu_is_mx1_mx2() ? 0x2C : 0x10)
 #define GPIO_IMR	(cpu_is_mx1_mx2() ? 0x30 : 0x14)
 #define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
-#define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
 
 #define GPIO_INT_LOW_LEV	(cpu_is_mx1_mx2() ? 0x3 : 0x0)
 #define GPIO_INT_HIGH_LEV	(cpu_is_mx1_mx2() ? 0x2 : 0x1)
@@ -289,7 +288,7 @@
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-		if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) {
+		if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
 			/* setup one handler for each entry */
 			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
 			set_irq_data(port[i].irq, &port[i]);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-mxc/include/mach/board-mx31moboard.h linux-libre-2.6.35-gnu/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-mxc/include/mach/board-mx31moboard.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-mxc/include/mach/board-mx31moboard.h	2010-08-01 18:11:14.000000000 -0400
@@ -26,6 +26,7 @@
 	MX31DEVBOARD	= 1,
 	MX31MARXBOT	= 2,
 	MX31SMARTBOT	= 3,
+	MX31EYEBOT	= 4,
 };
 
 /*
@@ -35,7 +36,7 @@
 
 extern void mx31moboard_devboard_init(void);
 extern void mx31moboard_marxbot_init(void);
-extern void mx31moboard_smartbot_init(void);
+extern void mx31moboard_smartbot_init(int board);
 
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-mxc/include/mach/iomux-mx3.h linux-libre-2.6.35-gnu/arch/arm/plat-mxc/include/mach/iomux-mx3.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-mxc/include/mach/iomux-mx3.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-mxc/include/mach/iomux-mx3.h	2010-08-01 18:11:14.000000000 -0400
@@ -719,6 +719,23 @@
 #define MX31_PIN_SRXD5__SRXD5		IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SCK5__SCK5		IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SFS5__SFS5		IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW0_KEY_ROW0	IOMUX_MODE(MX31_PIN_KEY_ROW0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW1_KEY_ROW1	IOMUX_MODE(MX31_PIN_KEY_ROW1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW2_KEY_ROW2	IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW3_KEY_ROW3	IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW4_KEY_ROW4	IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW5_KEY_ROW5	IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW6_KEY_ROW6	IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_ROW7_KEY_ROW7	IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL0_KEY_COL0	IOMUX_MODE(MX31_PIN_KEY_COL0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL1_KEY_COL1	IOMUX_MODE(MX31_PIN_KEY_COL1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL2_KEY_COL2	IOMUX_MODE(MX31_PIN_KEY_COL2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL3_KEY_COL3	IOMUX_MODE(MX31_PIN_KEY_COL3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL4_KEY_COL4	IOMUX_MODE(MX31_PIN_KEY_COL4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL5_KEY_COL5	IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL6_KEY_COL6	IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_KEY_COL7_KEY_COL7	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC)
+
 
 /*
  * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0,
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-mxc/include/mach/iomux-mx51.h linux-libre-2.6.35-gnu/arch/arm/plat-mxc/include/mach/iomux-mx51.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-mxc/include/mach/iomux-mx51.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-mxc/include/mach/iomux-mx51.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
@@ -37,6 +38,11 @@
 				PAD_CTL_SRE_FAST)
 #define MX51_UART3_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
 				PAD_CTL_SRE_FAST)
+#define MX51_USBH1_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
+				PAD_CTL_PKE | PAD_CTL_HYS)
+#define MX51_GPIO_PAD_CTRL		(PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \
+				PAD_CTL_SRE_FAST)
 
 /*
  * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
@@ -57,6 +63,7 @@
 #define MX51_PAD_GPIO_2_3__EIM_D19	IOMUX_PAD(0x3fc, 0x068, 1, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO_2_4__EIM_D20	IOMUX_PAD(0x400, 0x06c, 1, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO_2_5__EIM_D21	IOMUX_PAD(0x404, 0x070, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D21__GPIO_2_5	IOMUX_PAD(0x404, 0x070, IOMUX_CONFIG_ALT1, 0x0,   0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO_2_6__EIM_D22	IOMUX_PAD(0x408, 0x074, 1, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO_2_7__EIM_D23	IOMUX_PAD(0x40c, 0x078, 1, 0x0,   0, NO_PAD_CTRL)
 
@@ -208,18 +215,19 @@
 #define MX51_PAD_KEY_COL3__KEY_COL3	IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_KEY_COL4__KEY_COL4	IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_KEY_COL5__KEY_COL5	IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_25__USBH1_CLK	IOMUX_PAD(0x678, 0x278, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_26__USBH1_DIR	IOMUX_PAD(0x67C, 0x27C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_27__USBH1_STP	IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_28__USBH1_NXT	IOMUX_PAD(0x684, 0x284, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_11__USBH1_DATA0	IOMUX_PAD(0x688, 0x288, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_12__USBH1_DATA1	IOMUX_PAD(0x68C, 0x28C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_13__USBH1_DATA2	IOMUX_PAD(0x690, 0x290, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_14__USBH1_DATA3	IOMUX_PAD(0x694, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_15__USBH1_DATA4	IOMUX_PAD(0x698, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_16__USBH1_DATA5	IOMUX_PAD(0x69C, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_17__USBH1_DATA6	IOMUX_PAD(0x6A0, 0x2A0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_18__USBH1_DATA7	IOMUX_PAD(0x6A4, 0x2A4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_USBH1_CLK__USBH1_CLK	IOMUX_PAD(0x678, 0x278, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DIR__USBH1_DIR	IOMUX_PAD(0x67C, 0x27C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__USBH1_STP	IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_STP__GPIO_1_27	IOMUX_PAD(0x680, 0x280, IOMUX_CONFIG_GPIO, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_NXT__USBH1_NXT	IOMUX_PAD(0x684, 0x284, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA0__USBH1_DATA0	IOMUX_PAD(0x688, 0x288, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA1__USBH1_DATA1	IOMUX_PAD(0x68C, 0x28C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA2__USBH1_DATA2	IOMUX_PAD(0x690, 0x290, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA3__USBH1_DATA3	IOMUX_PAD(0x694, 0x294, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA4__USBH1_DATA4	IOMUX_PAD(0x698, 0x298, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA5__USBH1_DATA5	IOMUX_PAD(0x69C, 0x29C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA6__USBH1_DATA6	IOMUX_PAD(0x6A0, 0x2A0, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
+#define MX51_PAD_USBH1_DATA7__USBH1_DATA7	IOMUX_PAD(0x6A4, 0x2A4, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_USBH1_PAD_CTRL)
 #define MX51_PAD_GPIO_3_0__DI1_PIN11	IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO_3_1__DI1_PIN12	IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO_3_2__DI1_PIN13	IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL)
@@ -299,7 +307,7 @@
 #define MX51_PAD_GPIO_1_4__GPIO1_4	IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO_1_5__GPIO1_5	IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO_1_6__GPIO1_6	IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_7__GPIO1_7	IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_7__GPIO1_7	IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO_1_8__GPIO1_8	IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \
 						(PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP |  PAD_CTL_HYS))
 #define MX51_PAD_GPIO_1_9__GPIO1_9	IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL)
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-mxc/include/mach/mxc_ehci.h linux-libre-2.6.35-gnu/arch/arm/plat-mxc/include/mach/mxc_ehci.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-mxc/include/mach/mxc_ehci.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-mxc/include/mach/mxc_ehci.h	2010-08-01 18:11:14.000000000 -0400
@@ -25,6 +25,18 @@
 #define MXC_EHCI_INTERNAL_PHY		(1 << 7)
 #define MXC_EHCI_IPPUE_DOWN		(1 << 8)
 #define MXC_EHCI_IPPUE_UP		(1 << 9)
+#define MXC_EHCI_WAKEUP_ENABLED	(1 << 10)
+#define MXC_EHCI_ITC_NO_THRESHOLD	(1 << 11)
+
+#define MXC_USBCTRL_OFFSET		0
+#define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
+#define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
+
+#define MX5_USBOTHER_REGS_OFFSET	0x800
+
+/* USB_PHY_CTRL_FUNC2*/
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK		0x3
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT		0
 
 struct mxc_usbh_platform_data {
 	int (*init)(struct platform_device *pdev);
@@ -35,7 +47,7 @@
 	struct otg_transceiver	*otg;
 };
 
-int mxc_set_usbcontrol(int port, unsigned int flags);
+int mxc_initialize_usb_hw(int port, unsigned int flags);
 
 #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-mxc/time.c linux-libre-2.6.35-gnu/arch/arm/plat-mxc/time.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-mxc/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-mxc/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -54,14 +54,14 @@
 #define MX2_TSTAT_COMP		(1 << 0)
 
 /* MX31, MX35, MX25, MXC91231, MX5 */
-#define MX3_TCTL_WAITEN		(1 << 3) /* Wait enable mode */
-#define MX3_TCTL_CLK_IPG	(1 << 6)
-#define MX3_TCTL_FRR		(1 << 9)
-#define MX3_IR			0x0c
-#define MX3_TSTAT		0x08
-#define MX3_TSTAT_OF1		(1 << 0)
-#define MX3_TCN			0x24
-#define MX3_TCMP		0x10
+#define V2_TCTL_WAITEN		(1 << 3) /* Wait enable mode */
+#define V2_TCTL_CLK_IPG		(1 << 6)
+#define V2_TCTL_FRR		(1 << 9)
+#define V2_IR			0x0c
+#define V2_TSTAT		0x08
+#define V2_TSTAT_OF1		(1 << 0)
+#define V2_TCN			0x24
+#define V2_TCMP			0x10
 
 #define timer_is_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
 #define timer_is_v2()	(!timer_is_v1())
@@ -76,7 +76,7 @@
 	unsigned int tmp;
 
 	if (timer_is_v2())
-		__raw_writel(0, timer_base + MX3_IR);
+		__raw_writel(0, timer_base + V2_IR);
 	else {
 		tmp = __raw_readl(timer_base + MXC_TCTL);
 		__raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
@@ -86,7 +86,7 @@
 static inline void gpt_irq_enable(void)
 {
 	if (timer_is_v2())
-		__raw_writel(1<<0, timer_base + MX3_IR);
+		__raw_writel(1<<0, timer_base + V2_IR);
 	else {
 		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
 			timer_base + MXC_TCTL);
@@ -102,7 +102,7 @@
 			__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
 				timer_base + MX1_2_TSTAT);
 	} else if (timer_is_v2())
-		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
+		__raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT);
 }
 
 static cycle_t mx1_2_get_cycles(struct clocksource *cs)
@@ -110,9 +110,9 @@
 	return __raw_readl(timer_base + MX1_2_TCN);
 }
 
-static cycle_t mx3_get_cycles(struct clocksource *cs)
+static cycle_t v2_get_cycles(struct clocksource *cs)
 {
-	return __raw_readl(timer_base + MX3_TCN);
+	return __raw_readl(timer_base + V2_TCN);
 }
 
 static struct clocksource clocksource_mxc = {
@@ -129,7 +129,7 @@
 	unsigned int c = clk_get_rate(timer_clk);
 
 	if (timer_is_v2())
-		clocksource_mxc.read = mx3_get_cycles;
+		clocksource_mxc.read = v2_get_cycles;
 
 	clocksource_mxc.mult = clocksource_hz2mult(c,
 					clocksource_mxc.shift);
@@ -153,16 +153,16 @@
 				-ETIME : 0;
 }
 
-static int mx3_set_next_event(unsigned long evt,
+static int v2_set_next_event(unsigned long evt,
 			      struct clock_event_device *unused)
 {
 	unsigned long tcmp;
 
-	tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+	tcmp = __raw_readl(timer_base + V2_TCN) + evt;
 
-	__raw_writel(tcmp, timer_base + MX3_TCMP);
+	__raw_writel(tcmp, timer_base + V2_TCMP);
 
-	return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
+	return (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ?
 				-ETIME : 0;
 }
 
@@ -192,8 +192,8 @@
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
 		if (timer_is_v2())
-			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
-					timer_base + MX3_TCMP);
+			__raw_writel(__raw_readl(timer_base + V2_TCN) - 3,
+					timer_base + V2_TCMP);
 		else
 			__raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
 					timer_base + MX1_2_TCMP);
@@ -245,7 +245,7 @@
 	uint32_t tstat;
 
 	if (timer_is_v2())
-		tstat = __raw_readl(timer_base + MX3_TSTAT);
+		tstat = __raw_readl(timer_base + V2_TSTAT);
 	else
 		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
 
@@ -276,7 +276,7 @@
 	unsigned int c = clk_get_rate(timer_clk);
 
 	if (timer_is_v2())
-		clockevent_mxc.set_next_event = mx3_set_next_event;
+		clockevent_mxc.set_next_event = v2_set_next_event;
 
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
 					clockevent_mxc.shift);
@@ -308,7 +308,7 @@
 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
 	if (timer_is_v2())
-		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+		tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
 	else
 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-mxc/tzic.c linux-libre-2.6.35-gnu/arch/arm/plat-mxc/tzic.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-mxc/tzic.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-mxc/tzic.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C)2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
@@ -19,6 +19,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/common.h>
 
 /*
  *****************************************
@@ -144,6 +145,7 @@
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID);
 	}
+	mxc_register_gpios();
 
 	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-nomadik/gpio.c linux-libre-2.6.35-gnu/arch/arm/plat-nomadik/gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-nomadik/gpio.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-nomadik/gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,435 @@
+/*
+ * Generic GPIO driver for logic cells found in the Nomadik SoC
+ *
+ * Copyright (C) 2008,2009 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+/*
+ * The GPIO module in the Nomadik family of Systems-on-Chip is an
+ * AMBA device, managing 32 pins and alternate functions.  The logic block
+ * is currently only used in the Nomadik.
+ *
+ * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
+ */
+
+#define NMK_GPIO_PER_CHIP 32
+struct nmk_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem *addr;
+	struct clk *clk;
+	unsigned int parent_irq;
+	spinlock_t lock;
+	/* Keep track of configured edges */
+	u32 edge_rising;
+	u32 edge_falling;
+};
+
+/* Mode functions */
+int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
+	if (gpio_mode & NMK_GPIO_ALT_A)
+		afunc |= bit;
+	if (gpio_mode & NMK_GPIO_ALT_B)
+		bfunc |= bit;
+	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
+	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(nmk_gpio_set_mode);
+
+int nmk_gpio_get_mode(int gpio)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
+
+	return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
+}
+EXPORT_SYMBOL(nmk_gpio_get_mode);
+
+
+/* IRQ functions */
+static inline int nmk_gpio_get_bitmask(int gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+static void nmk_gpio_irq_ack(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	if (!nmk_chip)
+		return;
+	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
+}
+
+static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip,
+				  int gpio, bool enable)
+{
+	u32 bitmask = nmk_gpio_get_bitmask(gpio);
+	u32 reg;
+
+	/* we must individually set/clear the two edges */
+	if (nmk_chip->edge_rising & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_RIMSC);
+		if (enable)
+			reg |= bitmask;
+		else
+			reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_RIMSC);
+	}
+	if (nmk_chip->edge_falling & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_FIMSC);
+		if (enable)
+			reg |= bitmask;
+		else
+			reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_FIMSC);
+	}
+}
+
+static void nmk_gpio_irq_modify(unsigned int irq, bool enable)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	__nmk_gpio_irq_modify(nmk_chip, gpio, enable);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+}
+
+static void nmk_gpio_irq_mask(unsigned int irq)
+{
+	nmk_gpio_irq_modify(irq, false);
+};
+
+static void nmk_gpio_irq_unmask(unsigned int irq)
+{
+	nmk_gpio_irq_modify(irq, true);
+}
+
+static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+	bool enabled = !(irq_to_desc(irq)->status & IRQ_DISABLED);
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return -EINVAL;
+
+	if (type & IRQ_TYPE_LEVEL_HIGH)
+		return -EINVAL;
+	if (type & IRQ_TYPE_LEVEL_LOW)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+
+	if (enabled)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, false);
+
+	nmk_chip->edge_rising &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_RISING)
+		nmk_chip->edge_rising |= bitmask;
+
+	nmk_chip->edge_falling &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		nmk_chip->edge_falling |= bitmask;
+
+	if (enabled)
+		__nmk_gpio_irq_modify(nmk_chip, gpio, true);
+
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+
+static struct irq_chip nmk_gpio_irq_chip = {
+	.name		= "Nomadik-GPIO",
+	.ack		= nmk_gpio_irq_ack,
+	.mask		= nmk_gpio_irq_mask,
+	.unmask		= nmk_gpio_irq_unmask,
+	.set_type	= nmk_gpio_irq_set_type,
+};
+
+static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	struct irq_chip *host_chip = get_irq_chip(irq);
+	unsigned int gpio_irq;
+	u32 pending;
+	unsigned int first_irq;
+
+	if (host_chip->mask_ack)
+		host_chip->mask_ack(irq);
+	else {
+		host_chip->mask(irq);
+		if (host_chip->ack)
+			host_chip->ack(irq);
+	}
+
+	nmk_chip = get_irq_data(irq);
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) {
+		gpio_irq = first_irq + __ffs(pending);
+		generic_handle_irq(gpio_irq);
+	}
+
+	host_chip->unmask(irq);
+}
+
+static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
+{
+	unsigned int first_irq;
+	int i;
+
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) {
+		set_irq_chip(i, &nmk_gpio_irq_chip);
+		set_irq_handler(i, handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+		set_irq_chip_data(i, nmk_chip);
+		set_irq_type(i, IRQ_TYPE_EDGE_FALLING);
+	}
+	set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
+	set_irq_data(nmk_chip->parent_irq, nmk_chip);
+	return 0;
+}
+
+/* I/O Functions */
+static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+	return 0;
+}
+
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+	return 0;
+}
+
+static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+}
+
+static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	if (val)
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+	else
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip nmk_gpio_template = {
+	.direction_input	= nmk_gpio_make_input,
+	.get			= nmk_gpio_get_input,
+	.direction_output	= nmk_gpio_make_output,
+	.set			= nmk_gpio_set_output,
+	.ngpio			= NMK_GPIO_PER_CHIP,
+	.can_sleep		= 0,
+};
+
+static int __init nmk_gpio_probe(struct platform_device *dev)
+{
+	struct nmk_gpio_platform_data *pdata = dev->dev.platform_data;
+	struct nmk_gpio_chip *nmk_chip;
+	struct gpio_chip *chip;
+	struct resource *res;
+	struct clk *clk;
+	int irq;
+	int ret;
+
+	if (!pdata)
+		return -ENODEV;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENOENT;
+		goto out;
+	}
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto out;
+	}
+
+	if (request_mem_region(res->start, resource_size(res),
+			       dev_name(&dev->dev)) == NULL) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	clk = clk_get(&dev->dev, NULL);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		goto out_release;
+	}
+
+	clk_enable(clk);
+
+	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
+	if (!nmk_chip) {
+		ret = -ENOMEM;
+		goto out_clk;
+	}
+	/*
+	 * The virt address in nmk_chip->addr is in the nomadik register space,
+	 * so we can simply convert the resource address, without remapping
+	 */
+	nmk_chip->clk = clk;
+	nmk_chip->addr = io_p2v(res->start);
+	nmk_chip->chip = nmk_gpio_template;
+	nmk_chip->parent_irq = irq;
+	spin_lock_init(&nmk_chip->lock);
+
+	chip = &nmk_chip->chip;
+	chip->base = pdata->first_gpio;
+	chip->label = pdata->name;
+	chip->dev = &dev->dev;
+	chip->owner = THIS_MODULE;
+
+	ret = gpiochip_add(&nmk_chip->chip);
+	if (ret)
+		goto out_free;
+
+	platform_set_drvdata(dev, nmk_chip);
+
+	nmk_gpio_init_irq(nmk_chip);
+
+	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
+		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+	return 0;
+
+out_free:
+	kfree(nmk_chip);
+out_clk:
+	clk_disable(clk);
+	clk_put(clk);
+out_release:
+	release_mem_region(res->start, resource_size(res));
+out:
+	dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
+		  pdata->first_gpio, pdata->first_gpio+31);
+	return ret;
+}
+
+static int __exit nmk_gpio_remove(struct platform_device *dev)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	struct resource *res;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+
+	nmk_chip = platform_get_drvdata(dev);
+	gpiochip_remove(&nmk_chip->chip);
+	clk_disable(nmk_chip->clk);
+	clk_put(nmk_chip->clk);
+	kfree(nmk_chip);
+	release_mem_region(res->start, resource_size(res));
+	return 0;
+}
+
+
+static struct platform_driver nmk_gpio_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "gpio",
+		},
+	.probe = nmk_gpio_probe,
+	.remove = __exit_p(nmk_gpio_remove),
+	.suspend = NULL, /* to be done */
+	.resume = NULL,
+};
+
+static int __init nmk_gpio_init(void)
+{
+	return platform_driver_register(&nmk_gpio_driver);
+}
+
+arch_initcall(nmk_gpio_init);
+
+MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
+MODULE_DESCRIPTION("Nomadik GPIO Driver");
+MODULE_LICENSE("GPL");
+
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-nomadik/include/plat/gpio.h linux-libre-2.6.35-gnu/arch/arm/plat-nomadik/include/plat/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-nomadik/include/plat/gpio.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-nomadik/include/plat/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,70 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PLAT_GPIO_H
+#define __ASM_PLAT_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * These currently cause a function call to happen, they may be optimized
+ * if needed by adding cpu-specific defines to identify blocks
+ * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
+ */
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT	0x00
+#define NMK_GPIO_DATS	0x04
+#define NMK_GPIO_DATC	0x08
+#define NMK_GPIO_PDIS	0x0c
+#define NMK_GPIO_DIR	0x10
+#define NMK_GPIO_DIRS	0x14
+#define NMK_GPIO_DIRC	0x18
+#define NMK_GPIO_SLPC	0x1c
+#define NMK_GPIO_AFSLA	0x20
+#define NMK_GPIO_AFSLB	0x24
+
+#define NMK_GPIO_RIMSC	0x40
+#define NMK_GPIO_FIMSC	0x44
+#define NMK_GPIO_IS	0x48
+#define NMK_GPIO_IC	0x4c
+#define NMK_GPIO_RWIMSC	0x50
+#define NMK_GPIO_FWIMSC	0x54
+#define NMK_GPIO_WKS	0x58
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO	0
+#define NMK_GPIO_ALT_A	1
+#define NMK_GPIO_ALT_B	2
+#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+extern int nmk_gpio_get_mode(int gpio);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+	char *name;
+	int first_gpio;
+	int first_irq;
+};
+
+#endif /* __ASM_PLAT_GPIO_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-nomadik/include/plat/ste_dma40.h linux-libre-2.6.35-gnu/arch/arm/plat-nomadik/include/plat/ste_dma40.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-nomadik/include/plat/ste_dma40.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-nomadik/include/plat/ste_dma40.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,239 @@
+/*
+ * arch/arm/plat-nomadik/include/plat/ste_dma40.h
+ *
+ * Copyright (C) ST-Ericsson 2007-2010
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Per Friden <per.friden@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+
+
+#ifndef STE_DMA40_H
+#define STE_DMA40_H
+
+#include <linux/dmaengine.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+
+/* dev types for memcpy */
+#define STEDMA40_DEV_DST_MEMORY (-1)
+#define	STEDMA40_DEV_SRC_MEMORY (-1)
+
+/*
+ * Description of bitfields of channel_type variable is available in
+ * the info structure.
+ */
+
+/* Priority */
+#define STEDMA40_INFO_PRIO_TYPE_POS 2
+#define STEDMA40_HIGH_PRIORITY_CHANNEL (0x1 << STEDMA40_INFO_PRIO_TYPE_POS)
+#define STEDMA40_LOW_PRIORITY_CHANNEL (0x2 << STEDMA40_INFO_PRIO_TYPE_POS)
+
+/* Mode  */
+#define STEDMA40_INFO_CH_MODE_TYPE_POS 6
+#define STEDMA40_CHANNEL_IN_PHY_MODE (0x1 << STEDMA40_INFO_CH_MODE_TYPE_POS)
+#define STEDMA40_CHANNEL_IN_LOG_MODE (0x2 << STEDMA40_INFO_CH_MODE_TYPE_POS)
+#define STEDMA40_CHANNEL_IN_OPER_MODE (0x3 << STEDMA40_INFO_CH_MODE_TYPE_POS)
+
+/* Mode options */
+#define STEDMA40_INFO_CH_MODE_OPT_POS 8
+#define STEDMA40_PCHAN_BASIC_MODE (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_PCHAN_MODULO_MODE (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_PCHAN_DOUBLE_DST_MODE (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_LCHAN_SRC_PHY_DST_LOG (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_LCHAN_SRC_LOG_DST_PHS (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
+#define STEDMA40_LCHAN_SRC_LOG_DST_LOG (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)
+
+/* Interrupt */
+#define STEDMA40_INFO_TIM_POS 10
+#define STEDMA40_NO_TIM_FOR_LINK (0x0 << STEDMA40_INFO_TIM_POS)
+#define STEDMA40_TIM_FOR_LINK (0x1 << STEDMA40_INFO_TIM_POS)
+
+/* End of channel_type configuration */
+
+#define STEDMA40_ESIZE_8_BIT  0x0
+#define STEDMA40_ESIZE_16_BIT 0x1
+#define STEDMA40_ESIZE_32_BIT 0x2
+#define STEDMA40_ESIZE_64_BIT 0x3
+
+/* The value 4 indicates that PEN-reg shall be set to 0 */
+#define STEDMA40_PSIZE_PHY_1  0x4
+#define STEDMA40_PSIZE_PHY_2  0x0
+#define STEDMA40_PSIZE_PHY_4  0x1
+#define STEDMA40_PSIZE_PHY_8  0x2
+#define STEDMA40_PSIZE_PHY_16 0x3
+
+/*
+ * The number of elements differ in logical and
+ * physical mode
+ */
+#define STEDMA40_PSIZE_LOG_1  STEDMA40_PSIZE_PHY_2
+#define STEDMA40_PSIZE_LOG_4  STEDMA40_PSIZE_PHY_4
+#define STEDMA40_PSIZE_LOG_8  STEDMA40_PSIZE_PHY_8
+#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
+
+enum stedma40_flow_ctrl {
+	STEDMA40_NO_FLOW_CTRL,
+	STEDMA40_FLOW_CTRL,
+};
+
+enum stedma40_endianess {
+	STEDMA40_LITTLE_ENDIAN,
+	STEDMA40_BIG_ENDIAN
+};
+
+enum stedma40_periph_data_width {
+	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
+	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
+	STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
+	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
+};
+
+struct stedma40_half_channel_info {
+	enum stedma40_endianess endianess;
+	enum stedma40_periph_data_width data_width;
+	int psize;
+	enum stedma40_flow_ctrl flow_ctrl;
+};
+
+enum stedma40_xfer_dir {
+	STEDMA40_MEM_TO_MEM,
+	STEDMA40_MEM_TO_PERIPH,
+	STEDMA40_PERIPH_TO_MEM,
+	STEDMA40_PERIPH_TO_PERIPH
+};
+
+
+/**
+ * struct stedma40_chan_cfg - Structure to be filled by client drivers.
+ *
+ * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
+ * @channel_type: priority, mode, mode options and interrupt configuration.
+ * @src_dev_type: Src device type
+ * @dst_dev_type: Dst device type
+ * @src_info: Parameters for dst half channel
+ * @dst_info: Parameters for dst half channel
+ * @pre_transfer_data: Data to be passed on to the pre_transfer() function.
+ * @pre_transfer: Callback used if needed before preparation of transfer.
+ * Only called if device is set. size of bytes to transfer
+ * (in case of multiple element transfer size is size of the first element).
+ *
+ *
+ * This structure has to be filled by the client drivers.
+ * It is recommended to do all dma configurations for clients in the machine.
+ *
+ */
+struct stedma40_chan_cfg {
+	enum stedma40_xfer_dir			 dir;
+	unsigned int				 channel_type;
+	int					 src_dev_type;
+	int					 dst_dev_type;
+	struct stedma40_half_channel_info	 src_info;
+	struct stedma40_half_channel_info	 dst_info;
+	void					*pre_transfer_data;
+	int (*pre_transfer)			(struct dma_chan *chan,
+						 void *data,
+						 int size);
+};
+
+/**
+ * struct stedma40_platform_data - Configuration struct for the dma device.
+ *
+ * @dev_len: length of dev_tx and dev_rx
+ * @dev_tx: mapping between destination event line and io address
+ * @dev_rx: mapping between source event line and io address
+ * @memcpy: list of memcpy event lines
+ * @memcpy_len: length of memcpy
+ * @memcpy_conf_phy: default configuration of physical channel memcpy
+ * @memcpy_conf_log: default configuration of logical channel memcpy
+ * @llis_per_log: number of max linked list items per logical channel
+ *
+ */
+struct stedma40_platform_data {
+	u32				 dev_len;
+	const dma_addr_t		*dev_tx;
+	const dma_addr_t		*dev_rx;
+	int				*memcpy;
+	u32				 memcpy_len;
+	struct stedma40_chan_cfg	*memcpy_conf_phy;
+	struct stedma40_chan_cfg	*memcpy_conf_log;
+	unsigned int			 llis_per_log;
+};
+
+/**
+ * setdma40_set_psize() - Used for changing the package size of an
+ * already configured dma channel.
+ *
+ * @chan: dmaengine handle
+ * @src_psize: new package side for src. (STEDMA40_PSIZE*)
+ * @src_psize: new package side for dst. (STEDMA40_PSIZE*)
+ *
+ * returns 0 on ok, otherwise negative error number.
+ */
+int stedma40_set_psize(struct dma_chan *chan,
+		       int src_psize,
+		       int dst_psize);
+
+/**
+ * stedma40_filter() - Provides stedma40_chan_cfg to the
+ * ste_dma40 dma driver via the dmaengine framework.
+ * does some checking of what's provided.
+ *
+ * Never directly called by client. It used by dmaengine.
+ * @chan: dmaengine handle.
+ * @data: Must be of type: struct stedma40_chan_cfg and is
+ * the configuration of the framework.
+ *
+ *
+ */
+
+bool stedma40_filter(struct dma_chan *chan, void *data);
+
+/**
+ * stedma40_memcpy_sg() - extension of the dma framework, memcpy to/from
+ * scattergatter lists.
+ *
+ * @chan: dmaengine handle
+ * @sgl_dst: Destination scatter list
+ * @sgl_src: Source scatter list
+ * @sgl_len: The length of each scatterlist. Both lists must be of equal length
+ * and each element must match the corresponding element in the other scatter
+ * list.
+ * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
+ */
+
+struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan,
+						   struct scatterlist *sgl_dst,
+						   struct scatterlist *sgl_src,
+						   unsigned int sgl_len,
+						   unsigned long flags);
+
+/**
+ * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
+ * (=device)
+ *
+ * @chan: dmaengine handle
+ * @addr: source or destination physicall address.
+ * @size: bytes to transfer
+ * @direction: direction of transfer
+ * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
+ */
+
+static inline struct
+dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
+					    dma_addr_t addr,
+					    unsigned int size,
+					    enum dma_data_direction direction,
+					    unsigned long flags)
+{
+	struct scatterlist sg;
+	sg_init_table(&sg, 1);
+	sg.dma_address = addr;
+	sg.length = size;
+
+	return chan->device->device_prep_slave_sg(chan, &sg, 1,
+						  direction, flags);
+}
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-nomadik/Kconfig linux-libre-2.6.35-gnu/arch/arm/plat-nomadik/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/plat-nomadik/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-nomadik/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -19,4 +19,9 @@
 	  to multiple interrupt generating programmable
 	  32-bit free running decrementing counters.
 
+config NOMADIK_GPIO
+	bool
+	help
+	  Support for the Nomadik GPIO controller.
+
 endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-nomadik/Makefile linux-libre-2.6.35-gnu/arch/arm/plat-nomadik/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/plat-nomadik/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-nomadik/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -3,3 +3,4 @@
 # Licensed under GPLv2
 
 obj-$(CONFIG_HAS_MTU)	+= timer.o
+obj-$(CONFIG_NOMADIK_GPIO)	+= gpio.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-nomadik/timer.c linux-libre-2.6.35-gnu/arch/arm/plat-nomadik/timer.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-nomadik/timer.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-nomadik/timer.c	2010-08-01 18:11:14.000000000 -0400
@@ -2,7 +2,7 @@
  *  linux/arch/arm/mach-nomadik/timer.c
  *
  * Copyright (C) 2008 STMicroelectronics
- * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
+ * Copyright (C) 2010 Alessandro Rubini
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2, as
@@ -13,128 +13,177 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/clockchips.h>
+#include <linux/clk.h>
 #include <linux/jiffies.h>
+#include <linux/err.h>
 #include <asm/mach/time.h>
 
 #include <plat/mtu.h>
 
-static u32	nmdk_count;		/* accumulated count */
-static u32	nmdk_cycle;		/* write-once */
-
-/* setup by the platform code */
-void __iomem *mtu_base;
+void __iomem *mtu_base; /* ssigned by machine code */
 
 /*
- * clocksource: the MTU device is a decrementing counters, so we negate
- * the value being read.
+ * Kernel assumes that sched_clock can be called early
+ * but the MTU may not yet be initialized.
  */
-static cycle_t nmdk_read_timer(struct clocksource *cs)
+static cycle_t nmdk_read_timer_dummy(struct clocksource *cs)
 {
-	u32 count = readl(mtu_base + MTU_VAL(0));
-	return nmdk_count + nmdk_cycle - count;
+	return 0;
+}
 
+/* clocksource: MTU decrements, so we negate the value being read. */
+static cycle_t nmdk_read_timer(struct clocksource *cs)
+{
+	return -readl(mtu_base + MTU_VAL(0));
 }
 
 static struct clocksource nmdk_clksrc = {
 	.name		= "mtu_0",
-	.rating		= 120,
-	.read		= nmdk_read_timer,
+	.rating		= 200,
+	.read		= nmdk_read_timer_dummy,
+	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 /*
- * Clockevent device: currently only periodic mode is supported
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by OMAP implementation.)
  */
+unsigned long long notrace sched_clock(void)
+{
+	return clocksource_cyc2ns(nmdk_clksrc.read(
+				  &nmdk_clksrc),
+				  nmdk_clksrc.mult,
+				  nmdk_clksrc.shift);
+}
+
+/* Clockevent device: use one-shot mode */
 static void nmdk_clkevt_mode(enum clock_event_mode mode,
 			     struct clock_event_device *dev)
 {
+	u32 cr;
+
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		/* count current value? */
-		writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
+		pr_err("%s: periodic mode not supported\n", __func__);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
-		BUG(); /* Not supported, yet */
-		/* FALLTHROUGH */
+		/* Load highest value, enable device, enable interrupts */
+		cr = readl(mtu_base + MTU_CR(1));
+		writel(0, mtu_base + MTU_LR(1));
+		writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
+		writel(0x2, mtu_base + MTU_IMSC);
+		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
-		writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
+		/* disable irq */
+		writel(0, mtu_base + MTU_IMSC);
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		break;
 	}
 }
 
+static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
+{
+	/* writing the value has immediate effect */
+	writel(evt, mtu_base + MTU_LR(1));
+	return 0;
+}
+
 static struct clock_event_device nmdk_clkevt = {
-	.name		= "mtu_0",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.name		= "mtu_1",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
-	.rating		= 100,
+	.rating		= 200,
 	.set_mode	= nmdk_clkevt_mode,
+	.set_next_event	= nmdk_clkevt_next,
 };
 
 /*
- * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
- * as we are the only users of mtu0 by now.
+ * IRQ Handler for timer 1 of the MTU block.
  */
 static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
 {
-	/* ack: "interrupt clear register" */
-	writel(1 << 0, mtu_base + MTU_ICR);
-
-	/* we can't count lost ticks, unfortunately */
-	nmdk_count += nmdk_cycle;
-	nmdk_clkevt.event_handler(&nmdk_clkevt);
+	struct clock_event_device *evdev = dev_id;
 
+	writel(1 << 1, mtu_base + MTU_ICR); /* Interrupt clear reg */
+	evdev->event_handler(evdev);
 	return IRQ_HANDLED;
 }
 
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
 static struct irqaction nmdk_timer_irq = {
 	.name		= "Nomadik Timer Tick",
 	.flags		= IRQF_DISABLED | IRQF_TIMER,
 	.handler	= nmdk_timer_interrupt,
+	.dev_id		= &nmdk_clkevt,
 };
 
-static void nmdk_timer_reset(void)
+void __init nmdk_timer_init(void)
 {
+	unsigned long rate;
+	struct clk *clk0;
+	struct clk *clk1;
 	u32 cr;
 
-	writel(0, mtu_base + MTU_CR(0)); /* off */
+	clk0 = clk_get_sys("mtu0", NULL);
+	BUG_ON(IS_ERR(clk0));
 
-	/* configure load and background-load, and fire it up */
-	writel(nmdk_cycle, mtu_base + MTU_LR(0));
-	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
-	cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
-	writel(cr, mtu_base + MTU_CR(0));
-	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
-}
+	clk1 = clk_get_sys("mtu1", NULL);
+	BUG_ON(IS_ERR(clk1));
 
-void __init nmdk_timer_init(void)
-{
-	unsigned long rate;
-	int bits;
+	clk_enable(clk0);
+	clk_enable(clk1);
 
-	rate = CLOCK_TICK_RATE; /* 2.4MHz */
-	nmdk_cycle = (rate + HZ/2) / HZ;
+	/*
+	 * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
+	 * use a divide-by-16 counter if it's more than 16MHz
+	 */
+	cr = MTU_CRn_32BITS;;
+	rate = clk_get_rate(clk0);
+	if (rate > 16 << 20) {
+		rate /= 16;
+		cr |= MTU_CRn_PRESCALE_16;
+	} else {
+		cr |= MTU_CRn_PRESCALE_1;
+	}
 
-	/* Init the timer and register clocksource */
-	nmdk_timer_reset();
+	/* Timer 0 is the free running clocksource */
+	writel(cr, mtu_base + MTU_CR(0));
+	writel(0, mtu_base + MTU_LR(0));
+	writel(0, mtu_base + MTU_BGLR(0));
+	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 
 	nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
-	bits =  8*sizeof(nmdk_count);
-	nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
+	/* Now the scheduling clock is ready */
+	nmdk_clksrc.read = nmdk_read_timer;
 
 	if (clocksource_register(&nmdk_clksrc))
-		printk(KERN_ERR "timer: failed to initialize clock "
-			"source %s\n", nmdk_clksrc.name);
+		pr_err("timer: failed to initialize clock source %s\n",
+		       nmdk_clksrc.name);
+
+	/* Timer 1 is used for events, fix according to rate */
+	cr = MTU_CRn_32BITS;
+	rate = clk_get_rate(clk1);
+	if (rate > 16 << 20) {
+		rate /= 16;
+		cr |= MTU_CRn_PRESCALE_16;
+	} else {
+		cr |= MTU_CRn_PRESCALE_1;
+	}
+	writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
+	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+	nmdk_clkevt.max_delta_ns =
+		clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
+	nmdk_clkevt.min_delta_ns =
+		clockevent_delta2ns(0x00000002, &nmdk_clkevt);
+	nmdk_clkevt.cpumask	= cpumask_of(0);
 
 	/* Register irq and clockevents */
 	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
-	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
-	nmdk_clkevt.cpumask = cpumask_of(0);
 	clockevents_register_device(&nmdk_clkevt);
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/clock.c linux-libre-2.6.35-gnu/arch/arm/plat-omap/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -12,14 +12,12 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/string.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
-#include <linux/platform_device.h>
 #include <linux/cpufreq.h>
 #include <linux/debugfs.h>
 #include <linux/io.h>
@@ -32,9 +30,9 @@
 
 static struct clk_functions *arch_clock;
 
-/*-------------------------------------------------------------------------
+/*
  * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
+ */
 
 int clk_enable(struct clk *clk)
 {
@@ -92,9 +90,9 @@
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-/*-------------------------------------------------------------------------
+/*
  * Optional clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
+ */
 
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
@@ -140,9 +138,6 @@
 	unsigned long flags;
 	int ret = -EINVAL;
 
-	if (cpu_is_omap44xx())
-	/* OMAP4 clk framework not supported yet */
-		return 0;
 	if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
 		return ret;
 
@@ -169,9 +164,9 @@
 }
 EXPORT_SYMBOL(clk_get_parent);
 
-/*-------------------------------------------------------------------------
+/*
  * OMAP specific clock functions shared between omap1 and omap2
- *-------------------------------------------------------------------------*/
+ */
 
 int __initdata mpurate;
 
@@ -222,7 +217,7 @@
 }
 
 /* Propagate rate to children */
-void propagate_rate(struct clk * tclk)
+void propagate_rate(struct clk *tclk)
 {
 	struct clk *clkp;
 
@@ -389,7 +384,9 @@
 }
 #endif
 
-/*-------------------------------------------------------------------------*/
+/*
+ *
+ */
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 /*
@@ -404,7 +401,7 @@
 		if (ck->ops == &clkops_null)
 			continue;
 
-		if (ck->usecount > 0 || ck->enable_reg == 0)
+		if (ck->usecount > 0 || !ck->enable_reg)
 			continue;
 
 		spin_lock_irqsave(&clockfw_lock, flags);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/common.c linux-libre-2.6.35-gnu/arch/arm/plat-omap/common.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/common.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/common.c	2010-08-01 18:11:14.000000000 -0400
@@ -47,9 +47,6 @@
 struct omap_board_config_kernel *omap_board_config;
 int omap_board_config_size;
 
-/* used by omap-smp.c and board-4430sdp.c */
-void __iomem *gic_cpu_base_addr;
-
 static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 {
 	struct omap_board_config_kernel *kinfo = NULL;
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/dma.c linux-libre-2.6.35-gnu/arch/arm/plat-omap/dma.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/dma.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -501,7 +501,8 @@
 			burst = 0x2;
 			break;
 		}
-		/* not supported by current hardware on OMAP1
+		/*
+		 * not supported by current hardware on OMAP1
 		 * w |= (0x03 << 7);
 		 * fall through
 		 */
@@ -510,7 +511,8 @@
 			burst = 0x3;
 			break;
 		}
-		/* OMAP1 don't support burst 16
+		/*
+		 * OMAP1 don't support burst 16
 		 * fall through
 		 */
 	default:
@@ -604,7 +606,8 @@
 			burst = 0x3;
 			break;
 		}
-		/* OMAP1 don't support burst 16
+		/*
+		 * OMAP1 don't support burst 16
 		 * fall through
 		 */
 	default:
@@ -709,6 +712,21 @@
 	spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 
+static inline void omap2_disable_irq_lch(int lch)
+{
+	u32 val;
+	unsigned long flags;
+
+	if (!cpu_class_is_omap2())
+		return;
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	val = dma_read(IRQENABLE_L0);
+	val &= ~(1 << lch);
+	dma_write(val, IRQENABLE_L0);
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
+}
+
 int omap_request_dma(int dev_id, const char *dev_name,
 		     void (*callback)(int lch, u16 ch_status, void *data),
 		     void *data, int *dma_ch_out)
@@ -807,14 +825,7 @@
 	}
 
 	if (cpu_class_is_omap2()) {
-		u32 val;
-
-		spin_lock_irqsave(&dma_chan_lock, flags);
-		/* Disable interrupts */
-		val = dma_read(IRQENABLE_L0);
-		val &= ~(1 << lch);
-		dma_write(val, IRQENABLE_L0);
-		spin_unlock_irqrestore(&dma_chan_lock, flags);
+		omap2_disable_irq_lch(lch);
 
 		/* Clear the CSR register and IRQ status register */
 		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
@@ -1277,8 +1288,10 @@
 		return -EINVAL;
 	}
 
-	/* Allocate a queue to maintain the status of the channels
-	 * in the chain */
+	/*
+	 * Allocate a queue to maintain the status of the channels
+	 * in the chain
+	 */
 	channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
 	if (channels == NULL) {
 		printk(KERN_ERR "omap_dma: No memory for channel queue\n");
@@ -1907,7 +1920,8 @@
 		printk(KERN_INFO "DMA transaction error with device %d\n",
 		       dma_chan[ch].dev_id);
 		if (cpu_class_is_omap2()) {
-			/* Errata: sDMA Channel is not disabled
+			/*
+			 * Errata: sDMA Channel is not disabled
 			 * after a transaction error. So we explicitely
 			 * disable the channel
 			 */
@@ -2107,6 +2121,9 @@
 
 	for (ch = 0; ch < dma_chan_count; ch++) {
 		omap_clear_dma(ch);
+		if (cpu_class_is_omap2())
+			omap2_disable_irq_lch(ch);
+
 		dma_chan[ch].dev_id = -1;
 		dma_chan[ch].next_lch = -1;
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/dmtimer.c linux-libre-2.6.35-gnu/arch/arm/plat-omap/dmtimer.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/dmtimer.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/dmtimer.c	2010-08-01 18:11:14.000000000 -0400
@@ -264,8 +264,8 @@
 	{ .phys_base = 0x4a320000, .irq = OMAP44XX_IRQ_GPT12 },
 };
 static const char *omap4_dm_source_names[] __initdata = {
-	"sys_ck",
-	"omap_32k_fck",
+	"sys_clkin_ck",
+	"sys_32k_ck",
 	NULL
 };
 static struct clk *omap4_dm_source_clocks[2];
@@ -541,11 +541,11 @@
 		  * timer is stopped
 		  */
 		udelay(3500000 / clk_get_rate(timer->fclk) + 1);
-		/* Ack possibly pending interrupt */
-		omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
-				OMAP_TIMER_INT_OVERFLOW);
 #endif
 	}
+	/* Ack possibly pending interrupt */
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+			OMAP_TIMER_INT_OVERFLOW);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/gpio.c linux-libre-2.6.35-gnu/arch/arm/plat-omap/gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -27,6 +27,7 @@
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <asm/mach/irq.h>
+#include <plat/powerdomain.h>
 
 /*
  * OMAP1510 GPIO registers
@@ -137,7 +138,11 @@
 #define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
 #define OMAP4_GPIO_IRQWAKEN0		0x0044
 #define OMAP4_GPIO_IRQWAKEN1		0x0048
-#define OMAP4_GPIO_SYSSTATUS		0x0104
+#define OMAP4_GPIO_SYSSTATUS		0x0114
+#define OMAP4_GPIO_IRQENABLE1		0x011c
+#define OMAP4_GPIO_WAKE_EN		0x0120
+#define OMAP4_GPIO_IRQSTATUS2		0x0128
+#define OMAP4_GPIO_IRQENABLE2		0x012c
 #define OMAP4_GPIO_CTRL			0x0130
 #define OMAP4_GPIO_OE			0x0134
 #define OMAP4_GPIO_DATAIN		0x0138
@@ -148,6 +153,10 @@
 #define OMAP4_GPIO_FALLINGDETECT	0x014c
 #define OMAP4_GPIO_DEBOUNCENABLE	0x0150
 #define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
+#define OMAP4_GPIO_CLEARIRQENABLE1	0x0160
+#define OMAP4_GPIO_SETIRQENABLE1	0x0164
+#define OMAP4_GPIO_CLEARWKUENA		0x0180
+#define OMAP4_GPIO_SETWKUENA		0x0184
 #define OMAP4_GPIO_CLEARDATAOUT		0x0190
 #define OMAP4_GPIO_SETDATAOUT		0x0194
 /*
@@ -195,6 +204,7 @@
 	struct gpio_chip chip;
 	struct clk *dbck;
 	u32 mod_usage;
+	u32 dbck_enable_mask;
 };
 
 #define METHOD_MPUIO		0
@@ -303,8 +313,6 @@
 	u32 risingdetect;
 	u32 fallingdetect;
 	u32 dataout;
-	u32 setwkuena;
-	u32 setdataout;
 };
 
 static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
@@ -591,12 +599,16 @@
 		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
-	case METHOD_GPIO_44XX:
 		reg += OMAP24XX_GPIO_DATAOUT;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_DATAOUT;
+		break;
+#endif
 	default:
 		return -EINVAL;
 	}
@@ -612,78 +624,59 @@
 	__raw_writel(l, base + reg); \
 } while(0)
 
-void omap_set_gpio_debounce(int gpio, int enable)
+/**
+ * _set_gpio_debounce - low level gpio debounce time
+ * @bank: the gpio bank we're acting upon
+ * @gpio: the gpio number on this @gpio
+ * @debounce: debounce time to use
+ *
+ * OMAP's debounce time is in 31us steps so we need
+ * to convert and round up to the closest unit.
+ */
+static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
+		unsigned debounce)
 {
-	struct gpio_bank *bank;
-	void __iomem *reg;
-	unsigned long flags;
-	u32 val, l = 1 << get_gpio_index(gpio);
+	void __iomem		*reg = bank->base;
+	u32			val;
+	u32			l;
 
-	if (cpu_class_is_omap1())
-		return;
+	if (debounce < 32)
+		debounce = 0x01;
+	else if (debounce > 7936)
+		debounce = 0xff;
+	else
+		debounce = (debounce / 0x1f) - 1;
 
-	bank = get_gpio_bank(gpio);
-	reg = bank->base;
+	l = 1 << get_gpio_index(gpio);
 
 	if (cpu_is_omap44xx())
+		reg += OMAP4_GPIO_DEBOUNCINGTIME;
+	else
+		reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+
+	__raw_writel(debounce, reg);
+
+	reg = bank->base;
+	if (cpu_is_omap44xx())
 		reg += OMAP4_GPIO_DEBOUNCENABLE;
 	else
 		reg += OMAP24XX_GPIO_DEBOUNCE_EN;
 
-	if (!(bank->mod_usage & l)) {
-		printk(KERN_ERR "GPIO %d not requested\n", gpio);
-		return;
-	}
-
-	spin_lock_irqsave(&bank->lock, flags);
 	val = __raw_readl(reg);
 
-	if (enable && !(val & l))
+	if (debounce) {
 		val |= l;
-	else if (!enable && (val & l))
-		val &= ~l;
-	else
-		goto done;
-
-	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		if (enable)
+		if (cpu_is_omap34xx() || cpu_is_omap44xx())
 			clk_enable(bank->dbck);
-		else
+	} else {
+		val &= ~l;
+		if (cpu_is_omap34xx() || cpu_is_omap44xx())
 			clk_disable(bank->dbck);
 	}
+	bank->dbck_enable_mask = val;
 
 	__raw_writel(val, reg);
-done:
-	spin_unlock_irqrestore(&bank->lock, flags);
-}
-EXPORT_SYMBOL(omap_set_gpio_debounce);
-
-void omap_set_gpio_debounce_time(int gpio, int enc_time)
-{
-	struct gpio_bank *bank;
-	void __iomem *reg;
-
-	if (cpu_class_is_omap1())
-		return;
-
-	bank = get_gpio_bank(gpio);
-	reg = bank->base;
-
-	if (!bank->mod_usage) {
-		printk(KERN_ERR "GPIO not requested\n");
-		return;
-	}
-
-	enc_time &= 0xff;
-
-	if (cpu_is_omap44xx())
-		reg += OMAP4_GPIO_DEBOUNCINGTIME;
-	else
-		reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
-
-	__raw_writel(enc_time, reg);
 }
-EXPORT_SYMBOL(omap_set_gpio_debounce_time);
 
 #ifdef CONFIG_ARCH_OMAP2PLUS
 static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
@@ -724,15 +717,27 @@
 							 OMAP4_GPIO_IRQWAKEN0);
 			}
 		} else {
-			if (trigger != 0)
+			/*
+			 * GPIO wakeup request can only be generated on edge
+			 * transitions
+			 */
+			if (trigger & IRQ_TYPE_EDGE_BOTH)
 				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_SETWKUENA);
 			else
 				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_CLEARWKUENA);
 		}
-	} else {
-		if (trigger != 0)
+	}
+	/* This part needs to be executed always for OMAP34xx */
+	if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
+		/*
+		 * Log the edge gpio and manually trigger the IRQ
+		 * after resume if the input level changes
+		 * to avoid irq lost during PER RET/OFF mode
+		 * Applies for omap2 non-wakeup gpio and all omap3 gpios
+		 */
+		if (trigger & IRQ_TYPE_EDGE_BOTH)
 			bank->enabled_non_wakeup_gpios |= gpio_bit;
 		else
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
@@ -1200,11 +1205,17 @@
 #endif
 	if (!cpu_class_is_omap1()) {
 		if (!bank->mod_usage) {
+			void __iomem *reg = bank->base;
 			u32 ctrl;
-			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
-			ctrl &= 0xFFFFFFFE;
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx())
+				reg += OMAP24XX_GPIO_CTRL;
+			else if (cpu_is_omap44xx())
+				reg += OMAP4_GPIO_CTRL;
+			ctrl = __raw_readl(reg);
 			/* Module is enabled, clocks are not gated */
-			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+			ctrl &= 0xFFFFFFFE;
+			__raw_writel(ctrl, reg);
 		}
 		bank->mod_usage |= 1 << offset;
 	}
@@ -1226,22 +1237,34 @@
 		__raw_writel(1 << offset, reg);
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-	if ((bank->method == METHOD_GPIO_24XX) ||
-			(bank->method == METHOD_GPIO_44XX)) {
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 		__raw_writel(1 << offset, reg);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+	if (bank->method == METHOD_GPIO_44XX) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
+		__raw_writel(1 << offset, reg);
+	}
+#endif
 	if (!cpu_class_is_omap1()) {
 		bank->mod_usage &= ~(1 << offset);
 		if (!bank->mod_usage) {
+			void __iomem *reg = bank->base;
 			u32 ctrl;
-			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx())
+				reg += OMAP24XX_GPIO_CTRL;
+			else if (cpu_is_omap44xx())
+				reg += OMAP4_GPIO_CTRL;
+			ctrl = __raw_readl(reg);
 			/* Module is disabled, clocks are gated */
 			ctrl |= 1;
-			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+			__raw_writel(ctrl, reg);
 		}
 	}
 	_reset_gpio(bank, bank->chip.base + offset);
@@ -1570,9 +1593,14 @@
 		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 	case METHOD_GPIO_24XX:
-	case METHOD_GPIO_44XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_OE;
+		break;
+	default:
+		WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
+		return -EINVAL;
 	}
 	return __raw_readl(reg) & mask;
 }
@@ -1608,6 +1636,20 @@
 	return 0;
 }
 
+static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
+		unsigned debounce)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_debounce(bank, offset, debounce);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
 static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct gpio_bank *bank;
@@ -1845,7 +1887,8 @@
 				__raw_writel(0, bank->base +
 						OMAP24XX_GPIO_CTRL);
 			}
-			if (i < ARRAY_SIZE(non_wakeup_gpios))
+			if (cpu_is_omap24xx() &&
+			    i < ARRAY_SIZE(non_wakeup_gpios))
 				bank->non_wakeup_gpios = non_wakeup_gpios[i];
 			gpio_count = 32;
 		}
@@ -1860,6 +1903,7 @@
 		bank->chip.direction_input = gpio_input;
 		bank->chip.get = gpio_get;
 		bank->chip.direction_output = gpio_output;
+		bank->chip.set_debounce = gpio_debounce;
 		bank->chip.set = gpio_set;
 		bank->chip.to_irq = gpio_2irq;
 		if (bank_is_mpuio(bank)) {
@@ -2028,16 +2072,27 @@
 
 static int workaround_enabled;
 
-void omap2_gpio_prepare_for_retention(void)
+void omap2_gpio_prepare_for_idle(int power_state)
 {
 	int i, c = 0;
+	int min = 0;
 
-	/* Remove triggering for all non-wakeup GPIOs.  Otherwise spurious
-	 * IRQs will be generated.  See OMAP2420 Errata item 1.101. */
-	for (i = 0; i < gpio_bank_count; i++) {
+	if (cpu_is_omap34xx())
+		min = 1;
+
+	for (i = min; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
 		u32 l1, l2;
 
+		if (bank->dbck_enable_mask)
+			clk_disable(bank->dbck);
+
+		if (power_state > PWRDM_POWER_OFF)
+			continue;
+
+		/* If going to OFF, remove triggering for all
+		 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
+		 * generated.  See OMAP2420 Errata item 1.101. */
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
 
@@ -2085,16 +2140,23 @@
 	workaround_enabled = 1;
 }
 
-void omap2_gpio_resume_after_retention(void)
+void omap2_gpio_resume_after_idle(void)
 {
 	int i;
+	int min = 0;
 
-	if (!workaround_enabled)
-		return;
-	for (i = 0; i < gpio_bank_count; i++) {
+	if (cpu_is_omap34xx())
+		min = 1;
+	for (i = min; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
 		u32 l, gen, gen0, gen1;
 
+		if (bank->dbck_enable_mask)
+			clk_enable(bank->dbck);
+
+		if (!workaround_enabled)
+			continue;
+
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
 
@@ -2119,7 +2181,7 @@
 		 * horribly racy, but it's the best we can do to work around
 		 * this silicon bug. */
 		l ^= bank->saved_datain;
-		l &= bank->non_wakeup_gpios;
+		l &= bank->enabled_non_wakeup_gpios;
 
 		/*
 		 * No need to generate IRQs for the rising edge for gpio IRQs
@@ -2207,10 +2269,6 @@
 			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		gpio_context[i].dataout =
 			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
-		gpio_context[i].setwkuena =
-			__raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA);
-		gpio_context[i].setdataout =
-			__raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT);
 	}
 }
 
@@ -2243,10 +2301,6 @@
 				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(gpio_context[i].dataout,
 				bank->base + OMAP24XX_GPIO_DATAOUT);
-		__raw_writel(gpio_context[i].setwkuena,
-				bank->base + OMAP24XX_GPIO_SETWKUENA);
-		__raw_writel(gpio_context[i].setdataout,
-				bank->base + OMAP24XX_GPIO_SETDATAOUT);
 	}
 }
 #endif
@@ -2286,110 +2340,3 @@
 }
 
 arch_initcall(omap_gpio_sysinit);
-
-
-#ifdef	CONFIG_DEBUG_FS
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static int dbg_gpio_show(struct seq_file *s, void *unused)
-{
-	unsigned	i, j, gpio;
-
-	for (i = 0, gpio = 0; i < gpio_bank_count; i++) {
-		struct gpio_bank	*bank = gpio_bank + i;
-		unsigned		bankwidth = 16;
-		u32			mask = 1;
-
-		if (bank_is_mpuio(bank))
-			gpio = OMAP_MPUIO(0);
-		else if (cpu_class_is_omap2() || cpu_is_omap7xx())
-			bankwidth = 32;
-
-		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
-			unsigned	irq, value, is_in, irqstat;
-			const char	*label;
-
-			label = gpiochip_is_requested(&bank->chip, j);
-			if (!label)
-				continue;
-
-			irq = bank->virtual_irq_start + j;
-			value = gpio_get_value(gpio);
-			is_in = gpio_is_input(bank, mask);
-
-			if (bank_is_mpuio(bank))
-				seq_printf(s, "MPUIO %2d ", j);
-			else
-				seq_printf(s, "GPIO %3d ", gpio);
-			seq_printf(s, "(%-20.20s): %s %s",
-					label,
-					is_in ? "in " : "out",
-					value ? "hi"  : "lo");
-
-/* FIXME for at least omap2, show pullup/pulldown state */
-
-			irqstat = irq_desc[irq].status;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-			if (is_in && ((bank->suspend_wakeup & mask)
-					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
-				char	*trigger = NULL;
-
-				switch (irqstat & IRQ_TYPE_SENSE_MASK) {
-				case IRQ_TYPE_EDGE_FALLING:
-					trigger = "falling";
-					break;
-				case IRQ_TYPE_EDGE_RISING:
-					trigger = "rising";
-					break;
-				case IRQ_TYPE_EDGE_BOTH:
-					trigger = "bothedge";
-					break;
-				case IRQ_TYPE_LEVEL_LOW:
-					trigger = "low";
-					break;
-				case IRQ_TYPE_LEVEL_HIGH:
-					trigger = "high";
-					break;
-				case IRQ_TYPE_NONE:
-					trigger = "(?)";
-					break;
-				}
-				seq_printf(s, ", irq-%d %-8s%s",
-						irq, trigger,
-						(bank->suspend_wakeup & mask)
-							? " wakeup" : "");
-			}
-#endif
-			seq_printf(s, "\n");
-		}
-
-		if (bank_is_mpuio(bank)) {
-			seq_printf(s, "\n");
-			gpio = 0;
-		}
-	}
-	return 0;
-}
-
-static int dbg_gpio_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, dbg_gpio_show, &inode->i_private);
-}
-
-static const struct file_operations debug_fops = {
-	.open		= dbg_gpio_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init omap_gpio_debuginit(void)
-{
-	(void) debugfs_create_file("omap_gpio", S_IRUGO,
-					NULL, NULL, &debug_fops);
-	return 0;
-}
-late_initcall(omap_gpio_debuginit);
-#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/i2c.c linux-libre-2.6.35-gnu/arch/arm/plat-omap/i2c.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/i2c.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/i2c.c	2010-08-01 18:11:14.000000000 -0400
@@ -26,15 +26,19 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c-omap.h>
+
 #include <mach/irqs.h>
 #include <plat/mux.h>
 #include <plat/i2c.h>
+#include <plat/omap-pm.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
 #define OMAP2_I2C_BASE1		0x48070000
 #define OMAP2_I2C_BASE2		0x48072000
 #define OMAP2_I2C_BASE3		0x48060000
+#define OMAP4_I2C_BASE4		0x48350000
 
 static const char name[] = "i2c_omap";
 
@@ -51,11 +55,14 @@
 
 static struct resource i2c_resources[][2] = {
 	{ I2C_RESOURCE_BUILDER(0, 0) },
-#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
+#if	defined(CONFIG_ARCH_OMAP2PLUS)
+	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, 0) },
 #endif
-#if	defined(CONFIG_ARCH_OMAP3)
-	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) },
+#if	defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, 0) },
+#endif
+#if	defined(CONFIG_ARCH_OMAP4)
+	{ I2C_RESOURCE_BUILDER(OMAP4_I2C_BASE4, 0) },
 #endif
 };
 
@@ -70,14 +77,17 @@
 		},					\
 	}
 
-static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
+static struct omap_i2c_bus_platform_data i2c_pdata[ARRAY_SIZE(i2c_resources)];
 static struct platform_device omap_i2c_devices[] = {
-	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
-#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
+	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
+#if	defined(CONFIG_ARCH_OMAP2PLUS)
+	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_pdata[1]),
 #endif
-#if	defined(CONFIG_ARCH_OMAP3)
-	I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]),
+#if	defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_pdata[2]),
+#endif
+#if	defined(CONFIG_ARCH_OMAP4)
+	I2C_DEV_BUILDER(4, i2c_resources[3], &i2c_pdata[3]),
 #endif
 };
 
@@ -93,39 +103,89 @@
 		ports = 2;
 	else if (cpu_is_omap34xx())
 		ports = 3;
+	else if (cpu_is_omap44xx())
+		ports = 4;
 
 	return ports;
 }
 
-static int __init omap_i2c_add_bus(int bus_id)
+/* Shared between omap2 and 3 */
+static resource_size_t omap2_i2c_irq[3] __initdata = {
+	INT_24XX_I2C1_IRQ,
+	INT_24XX_I2C2_IRQ,
+	INT_34XX_I2C3_IRQ,
+};
+
+static resource_size_t omap4_i2c_irq[4] __initdata = {
+	OMAP44XX_IRQ_I2C1,
+	OMAP44XX_IRQ_I2C2,
+	OMAP44XX_IRQ_I2C3,
+	OMAP44XX_IRQ_I2C4,
+};
+
+static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id)
 {
-	struct platform_device *pdev;
+	struct omap_i2c_bus_platform_data *pd;
 	struct resource *res;
-	resource_size_t base, irq;
 
-	pdev = &omap_i2c_devices[bus_id - 1];
+	pd = pdev->dev.platform_data;
+	res = pdev->resource;
+	res[0].start = OMAP1_I2C_BASE;
+	res[0].end = res[0].start + OMAP_I2C_SIZE;
+	res[1].start = INT_I2C;
+	omap1_i2c_mux_pins(bus_id);
+
+	return platform_device_register(pdev);
+}
+
+static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id)
+{
+	struct resource *res;
+	resource_size_t *irq;
+
+	res = pdev->resource;
+
+	if (!cpu_is_omap44xx())
+		irq = omap2_i2c_irq;
+	else
+		irq = omap4_i2c_irq;
+
 	if (bus_id == 1) {
-		res = pdev->resource;
-		if (cpu_class_is_omap1()) {
-			base = OMAP1_I2C_BASE;
-			irq = INT_I2C;
-		} else {
-			base = OMAP2_I2C_BASE1;
-			irq = INT_24XX_I2C1_IRQ;
-		}
-		res[0].start = base;
-		res[0].end = base + OMAP_I2C_SIZE;
-		res[1].start = irq;
+		res[0].start = OMAP2_I2C_BASE1;
+		res[0].end = res[0].start + OMAP_I2C_SIZE;
 	}
 
-	if (cpu_class_is_omap1())
-		omap1_i2c_mux_pins(bus_id);
-	if (cpu_class_is_omap2())
-		omap2_i2c_mux_pins(bus_id);
+	res[1].start = irq[bus_id - 1];
+	omap2_i2c_mux_pins(bus_id);
+
+	/*
+	 * When waiting for completion of a i2c transfer, we need to
+	 * set a wake up latency constraint for the MPU. This is to
+	 * ensure quick enough wakeup from idle, when transfer
+	 * completes.
+	 */
+	if (cpu_is_omap34xx()) {
+		struct omap_i2c_bus_platform_data *pd;
+
+		pd = pdev->dev.platform_data;
+		pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat;
+	}
 
 	return platform_device_register(pdev);
 }
 
+static int __init omap_i2c_add_bus(int bus_id)
+{
+	struct platform_device *pdev;
+
+	pdev = &omap_i2c_devices[bus_id - 1];
+
+	if (cpu_class_is_omap1())
+		return omap1_i2c_add_bus(pdev, bus_id);
+	else
+		return omap2_i2c_add_bus(pdev, bus_id);
+}
+
 /**
  * omap_i2c_bus_setup - Process command line options for the I2C bus speed
  * @str: String of options
@@ -146,8 +206,8 @@
 	get_options(str, 3, ints);
 	if (ints[0] < 2 || ints[1] < 1 || ints[1] > ports)
 		return 0;
-	i2c_rate[ints[1] - 1] = ints[2];
-	i2c_rate[ints[1] - 1] |= OMAP_I2C_CMDLINE_SETUP;
+	i2c_pdata[ints[1] - 1].clkrate = ints[2];
+	i2c_pdata[ints[1] - 1].clkrate |= OMAP_I2C_CMDLINE_SETUP;
 
 	return 1;
 }
@@ -161,9 +221,9 @@
 {
 	int i, err = 0;
 
-	for (i = 0; i < ARRAY_SIZE(i2c_rate); i++)
-		if (i2c_rate[i] & OMAP_I2C_CMDLINE_SETUP) {
-			i2c_rate[i] &= ~OMAP_I2C_CMDLINE_SETUP;
+	for (i = 0; i < ARRAY_SIZE(i2c_pdata); i++)
+		if (i2c_pdata[i].clkrate & OMAP_I2C_CMDLINE_SETUP) {
+			i2c_pdata[i].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
 			err = omap_i2c_add_bus(i + 1);
 			if (err)
 				goto out;
@@ -197,9 +257,10 @@
 			return err;
 	}
 
-	if (!i2c_rate[bus_id - 1])
-		i2c_rate[bus_id - 1] = clkrate;
-	i2c_rate[bus_id - 1] &= ~OMAP_I2C_CMDLINE_SETUP;
+	if (!i2c_pdata[bus_id - 1].clkrate)
+		i2c_pdata[bus_id - 1].clkrate = clkrate;
+
+	i2c_pdata[bus_id - 1].clkrate &= ~OMAP_I2C_CMDLINE_SETUP;
 
 	return omap_i2c_add_bus(bus_id);
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/clock.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/clock.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -196,15 +196,15 @@
 #define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
 
 /* Clksel_rate flags */
-#define DEFAULT_RATE		(1 << 0)
-#define RATE_IN_242X		(1 << 1)
-#define RATE_IN_243X		(1 << 2)
-#define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
-#define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
-#define RATE_IN_36XX		(1 << 5)
-#define RATE_IN_4430		(1 << 6)
+#define RATE_IN_242X		(1 << 0)
+#define RATE_IN_243X		(1 << 1)
+#define RATE_IN_3XXX		(1 << 2)	/* rates common to all OMAP3 */
+#define RATE_IN_3430ES2		(1 << 3)	/* 3430ES2 rates only */
+#define RATE_IN_36XX		(1 << 4)
+#define RATE_IN_4430		(1 << 5)
 
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 
+#define RATE_IN_3430ES2PLUS	(RATE_IN_3430ES2 | RATE_IN_36XX)
 
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/common.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/common.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/common.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/common.h	2010-08-01 18:11:14.000000000 -0400
@@ -31,9 +31,6 @@
 
 struct sys_timer;
 
-/* used by omap-smp.c and board-4430sdp.c */
-extern void __iomem *gic_cpu_base_addr;
-
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/control.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/control.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/control.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/control.h	2010-08-01 18:11:14.000000000 -0400
@@ -207,6 +207,9 @@
 /* 44xx control status register offset */
 #define OMAP44XX_CONTROL_STATUS		0x2c4
 
+/* 44xx-only CONTROL_GENERAL register offsets */
+#define OMAP44XX_CONTROL_MMC1			0x628
+#define OMAP44XX_CONTROL_PBIAS_LITE		0x600
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.
@@ -252,6 +255,23 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
+/* CONTROL_PBIAS_LITE bits for OMAP4 */
+#define OMAP4_MMC1_PWRDNZ			(1 << 26)
+#define OMAP4_MMC1_PBIASLITE_HIZ_MODE		(1 << 25)
+#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT	(1 << 24)
+#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR	(1 << 23)
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ		(1 << 22)
+#define OMAP4_MMC1_PBIASLITE_VMODE		(1 << 21)
+#define OMAP4_USBC1_ICUSB_PWRDNZ		(1 << 20)
+
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0	(1 << 31)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1	(1 << 30)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2	(1 << 29)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3	(1 << 28)
+#define OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL	(1 << 27)
+#define OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL	(1 << 26)
+#define OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL	(1 << 25)
+
 /* CONTROL_PROG_IO1 bits */
 #define OMAP3630_PRG_SDMMC1_SPEEDCTRL	(1 << 20)
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/gpio.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -72,8 +72,8 @@
 				 IH_GPIO_BASE + (nr))
 
 extern int omap_gpio_init(void);	/* Call from board init only */
-extern void omap2_gpio_prepare_for_retention(void);
-extern void omap2_gpio_resume_after_retention(void);
+extern void omap2_gpio_prepare_for_idle(int power_state);
+extern void omap2_gpio_resume_after_idle(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
 extern void omap_gpio_save_context(void);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/irqs.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -428,4 +428,8 @@
 
 #include <mach/hardware.h>
 
+#ifdef CONFIG_FIQ
+#define FIQ_START		1024
+#endif
+
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/mcbsp.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/mcbsp.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/mcbsp.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/mcbsp.h	2010-08-01 18:11:14.000000000 -0400
@@ -149,6 +149,8 @@
 #define OMAP_MCBSP_REG_WAKEUPEN	0xA8
 #define OMAP_MCBSP_REG_XCCR	0xAC
 #define OMAP_MCBSP_REG_RCCR	0xB0
+#define OMAP_MCBSP_REG_XBUFFSTAT	0xB4
+#define OMAP_MCBSP_REG_RBUFFSTAT	0xB8
 #define OMAP_MCBSP_REG_SSELCR	0xBC
 
 #define OMAP_ST_REG_REV		0x00
@@ -471,6 +473,8 @@
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
 u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
 u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+u16 omap_mcbsp_get_tx_delay(unsigned int id);
+u16 omap_mcbsp_get_rx_delay(unsigned int id);
 int omap_mcbsp_get_dma_op_mode(unsigned int id);
 #else
 static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
@@ -479,6 +483,8 @@
 { }
 static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
 static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; }
 static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
 #endif
 int omap_mcbsp_request(unsigned int id);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/mmc.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/mmc.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/mmc.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/mmc.h	2010-08-01 18:11:14.000000000 -0400
@@ -102,6 +102,10 @@
 		/* Regulator off remapped to sleep */
 		unsigned vcc_aux_disable_is_sleep:1;
 
+		/* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS		(1 << 0)
+		unsigned features;
+
 		int switch_pin;			/* gpio (card detect) */
 		int gpio_wp;			/* gpio (write protect) */
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/multi.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/multi.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/multi.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/multi.h	2010-08-01 18:11:14.000000000 -0400
@@ -61,9 +61,9 @@
 #  define OMAP_NAME omap16xx
 # endif
 #endif
-#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
+#ifdef CONFIG_ARCH_OMAP2PLUS
 # if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2 can't be selected at the same time"
+#  error "OMAP1 and OMAP2PLUS can't be selected at the same time"
 # endif
 #endif
 #ifdef CONFIG_ARCH_OMAP2420
@@ -82,12 +82,20 @@
 #  define OMAP_NAME omap2430
 # endif
 #endif
-#ifdef CONFIG_ARCH_OMAP3430
+#ifdef CONFIG_ARCH_OMAP3
 # ifdef OMAP_NAME
 #  undef  MULTI_OMAP2
 #  define MULTI_OMAP2
 # else
-#  define OMAP_NAME omap3430
+#  define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap4
 # endif
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/omap34xx.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/omap34xx.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/omap34xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/omap34xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -82,5 +82,10 @@
 
 #define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
+/* Security */
+#define OMAP34XX_SEC_BASE	(L4_34XX_BASE + 0xA0000)
+#define OMAP34XX_SEC_SHA1MD5_BASE	(OMAP34XX_SEC_BASE + 0x23000)
+#define OMAP34XX_SEC_AES_BASE	(OMAP34XX_SEC_BASE + 0x25000)
+
 #endif /* __ASM_ARCH_OMAP3_H */
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/omap44xx.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/omap44xx.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/omap44xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/omap44xx.h	2010-08-01 18:11:14.000000000 -0400
@@ -30,6 +30,7 @@
 #define OMAP4430_CM_BASE		OMAP4430_CM1_BASE
 #define OMAP4430_CM2_BASE		0x4a008000
 #define OMAP4430_PRM_BASE		0x4a306000
+#define OMAP4430_PRCM_MPU_BASE		0x48243000
 #define OMAP44XX_GPMC_BASE		0x50000000
 #define OMAP443X_SCM_BASE		0x4a002000
 #define OMAP443X_CTRL_BASE		0x4a100000
@@ -48,5 +49,8 @@
 #define OMAP44XX_MAILBOX_BASE		(L4_44XX_BASE + 0xF4000)
 #define OMAP44XX_HSUSB_OTG_BASE		(L4_44XX_BASE + 0xAB000)
 
+#define OMAP4_MMU1_BASE			0x55082000
+#define OMAP4_MMU2_BASE			0x4A066000
+
 #endif /* __ASM_ARCH_OMAP44XX_H */
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/omap_hwmod.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/omap_hwmod.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/omap_hwmod.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/omap_hwmod.h	2010-08-01 18:11:14.000000000 -0400
@@ -176,9 +176,8 @@
 #define OCP_USER_SDMA			(1 << 1)
 
 /* omap_hwmod_ocp_if.flags bits */
-#define OCPIF_HAS_IDLEST		(1 << 0)
-#define OCPIF_SWSUP_IDLE		(1 << 1)
-#define OCPIF_CAN_BURST			(1 << 2)
+#define OCPIF_SWSUP_IDLE		(1 << 0)
+#define OCPIF_CAN_BURST			(1 << 1)
 
 /**
  * struct omap_hwmod_ocp_if - OCP interface data
@@ -327,14 +326,12 @@
 
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
- * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
- * @device_offs: device register offset from @module_offs
+ * @clkctrl_reg: PRCM address of the clock control register
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
-	u32 module_offs;
-	u16 device_offs;
-	u8 submodule_wkdep_bit;
+	void __iomem	*clkctrl_reg;
+	u8		submodule_wkdep_bit;
 };
 
 
@@ -353,6 +350,8 @@
  *     when module is enabled, rather than the default, which is to
  *     enable autoidle
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ * HWMOD_NO_IDLEST : this module does not have idle status - this is the case
+ *     only for few initiator modules on OMAP2 & 3.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -360,6 +359,7 @@
 #define HWMOD_INIT_NO_IDLE			(1 << 3)
 #define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
 #define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
+#define HWMOD_NO_IDLEST				(1 << 6)
 
 /*
  * omap_hwmod._int_flags definitions
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/powerdomain.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/powerdomain.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/powerdomain.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/powerdomain.h	2010-08-01 18:11:14.000000000 -0400
@@ -31,6 +31,7 @@
 #define PWRDM_MAX_PWRSTS	4
 
 /* Powerdomain allowable state bitfields */
+#define PWRSTS_ON		(1 << PWRDM_POWER_ON)
 #define PWRSTS_OFF_ON		((1 << PWRDM_POWER_OFF) | \
 				 (1 << PWRDM_POWER_ON))
 
@@ -49,6 +50,12 @@
 					  * in MEM bank 1 position. This is
 					  * true for OMAP3430
 					  */
+#define PWRDM_HAS_LOWPOWERSTATECHANGE	(1 << 2) /*
+						  * support to transition from a
+						  * sleep state to a lower sleep
+						  * state without waking up the
+						  * powerdomain
+						  */
 
 /*
  * Number of memory banks that are power-controllable.	On OMAP4430, the
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/serial.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/serial.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/serial.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/serial.h	2010-08-01 18:11:14.000000000 -0400
@@ -15,6 +15,20 @@
 
 #include <linux/init.h>
 
+/*
+ * Memory entry used for the DEBUG_LL UART configuration. See also
+ * uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ *    uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ *    and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO		(PHYS_OFFSET + 0x3ffc)
+
 /* OMAP1 serial ports */
 #define OMAP1_UART1_BASE	0xfffb0000
 #define OMAP1_UART2_BASE	0xfffb0800
@@ -39,7 +53,7 @@
 
 /* External port on Zoom2/3 */
 #define ZOOM_UART_BASE		0x10000000
-#define ZOOM_UART_VIRT		0xfb000000
+#define ZOOM_UART_VIRT		0xfa400000
 
 #define OMAP_PORT_SHIFT		2
 #define OMAP7XX_PORT_SHIFT	0
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/uncompress.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/uncompress.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/uncompress.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/uncompress.h	2010-08-01 18:11:14.000000000 -0400
@@ -20,27 +20,21 @@
 #include <linux/types.h>
 #include <linux/serial_reg.h>
 
+#include <asm/memory.h>
 #include <asm/mach-types.h>
 
 #include <plat/serial.h>
 
-static volatile u8 *uart1_base;
-static int uart1_shift;
-
 static volatile u8 *uart_base;
 static int uart_shift;
 
 /*
- * Store the DEBUG_LL uart number into UART1 scratchpad register.
+ * Store the DEBUG_LL uart number into memory.
  * See also debug-macro.S, and serial.c for related code.
- *
- * Please note that we currently assume that:
- * - UART1 clocks are enabled for register access
- * - UART1 scratchpad register can be used
  */
-static void set_uart1_scratchpad(unsigned char port)
+static void set_omap_uart_info(unsigned char port)
 {
-	uart1_base[UART_SCR << uart1_shift] = port;
+	*(volatile u32 *)OMAP_UART_INFO = port;
 }
 
 static void putc(int c)
@@ -60,42 +54,38 @@
 /*
  * Macros to configure UART1 and debug UART
  */
-#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft,			\
-			dbg_uart, dbg_shft, dbg_id)			\
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id)		\
 	if (machine_is_##mach()) {					\
-		uart1_base = (volatile u8 *)(uart1_phys);		\
-		uart1_shift = (uart1_shft);				\
 		uart_base = (volatile u8 *)(dbg_uart);			\
 		uart_shift = (dbg_shft);				\
 		port = (dbg_id);					\
-		set_uart1_scratchpad(port);				\
+		set_omap_uart_info(port);				\
 		break;							\
 	}
 
 #define DEBUG_LL_OMAP7XX(p, mach)					\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP7XX_PORT_SHIFT,	\
-		OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, OMAP1UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT,	\
+		OMAP1UART##p)
 
 #define DEBUG_LL_OMAP1(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP1UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP1UART##p)
 
 #define DEBUG_LL_OMAP2(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP2UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP2UART##p)
 
 #define DEBUG_LL_OMAP3(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP3_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP3UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP3UART##p)
 
 #define DEBUG_LL_OMAP4(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP4_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP4UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP4UART##p)
 
 /* Zoom2/3 shift is different for UART1 and external port */
 #define DEBUG_LL_ZOOM(mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT,	\
-		ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+	_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
 
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/usb.h linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/usb.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/include/plat/usb.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/include/plat/usb.h	2010-08-01 18:11:14.000000000 -0400
@@ -13,6 +13,20 @@
 	EHCI_HCD_OMAP_MODE_TLL,
 };
 
+enum ohci_omap3_port_mode {
+	OMAP_OHCI_PORT_MODE_UNUSED,
+	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM,
+};
+
 struct ehci_hcd_omap_platform_data {
 	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
 	unsigned			phy_reset:1;
@@ -21,6 +35,13 @@
 	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
 };
 
+struct ohci_hcd_omap_platform_data {
+	enum ohci_omap3_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+
+	/* Set this to true for ES2.x silicon */
+	unsigned			es2_compatibility:1;
+};
+
 /*-------------------------------------------------------------------------*/
 
 #define OMAP1_OTG_BASE			0xfffb0400
@@ -47,6 +68,7 @@
 	u8	interface_type;
 	u8	mode;
 	u16	power;
+	unsigned extvbus:1;
 };
 
 enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
@@ -55,6 +77,8 @@
 
 extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
 
+extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
+
 #endif
 
 void omap_usb_init(struct omap_usb_config *pdata);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/iommu.c linux-libre-2.6.35-gnu/arch/arm/plat-omap/iommu.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/iommu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/iommu.c	2010-08-01 18:11:14.000000000 -0400
@@ -25,6 +25,11 @@
 
 #include "iopgtable.h"
 
+#define for_each_iotlb_cr(obj, n, __i, cr)				\
+	for (__i = 0;							\
+	     (__i < (n)) && (cr = __iotlb_read_cr((obj), __i), true);	\
+	     __i++)
+
 /* accommodate the difference between omap1 and omap2/3 */
 static const struct iommu_functions *arch_iommu;
 
@@ -172,15 +177,12 @@
 	l->base = MMU_LOCK_BASE(val);
 	l->vict = MMU_LOCK_VICT(val);
 
-	BUG_ON(l->base != 0); /* Currently no preservation is used */
 }
 
 static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
 {
 	u32 val;
 
-	BUG_ON(l->base != 0); /* Currently no preservation is used */
-
 	val = (l->base << MMU_LOCK_BASE_SHIFT);
 	val |= (l->vict << MMU_LOCK_VICT_SHIFT);
 
@@ -214,6 +216,20 @@
 	return arch_iommu->dump_cr(obj, cr, buf);
 }
 
+/* only used in iotlb iteration for-loop */
+static struct cr_regs __iotlb_read_cr(struct iommu *obj, int n)
+{
+	struct cr_regs cr;
+	struct iotlb_lock l;
+
+	iotlb_lock_get(obj, &l);
+	l.vict = n;
+	iotlb_lock_set(obj, &l);
+	iotlb_read_cr(obj, &cr);
+
+	return cr;
+}
+
 /**
  * load_iotlb_entry - Set an iommu tlb entry
  * @obj:	target iommu
@@ -221,7 +237,6 @@
  **/
 int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
 {
-	int i;
 	int err = 0;
 	struct iotlb_lock l;
 	struct cr_regs *cr;
@@ -231,21 +246,30 @@
 
 	clk_enable(obj->clk);
 
-	for (i = 0; i < obj->nr_tlb_entries; i++) {
+	iotlb_lock_get(obj, &l);
+	if (l.base == obj->nr_tlb_entries) {
+		dev_warn(obj->dev, "%s: preserve entries full\n", __func__);
+		err = -EBUSY;
+		goto out;
+	}
+	if (!e->prsvd) {
+		int i;
 		struct cr_regs tmp;
 
+		for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, tmp)
+			if (!iotlb_cr_valid(&tmp))
+				break;
+
+		if (i == obj->nr_tlb_entries) {
+			dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+			err = -EBUSY;
+			goto out;
+		}
+
 		iotlb_lock_get(obj, &l);
-		l.vict = i;
+	} else {
+		l.vict = l.base;
 		iotlb_lock_set(obj, &l);
-		iotlb_read_cr(obj, &tmp);
-		if (!iotlb_cr_valid(&tmp))
-			break;
-	}
-
-	if (i == obj->nr_tlb_entries) {
-		dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
-		err = -EBUSY;
-		goto out;
 	}
 
 	cr = iotlb_alloc_cr(obj, e);
@@ -257,9 +281,11 @@
 	iotlb_load_cr(obj, cr);
 	kfree(cr);
 
+	if (e->prsvd)
+		l.base++;
 	/* increment victim for next tlb load */
 	if (++l.vict == obj->nr_tlb_entries)
-		l.vict = 0;
+		l.vict = l.base;
 	iotlb_lock_set(obj, &l);
 out:
 	clk_disable(obj->clk);
@@ -276,20 +302,15 @@
  **/
 void flush_iotlb_page(struct iommu *obj, u32 da)
 {
-	struct iotlb_lock l;
 	int i;
+	struct cr_regs cr;
 
 	clk_enable(obj->clk);
 
-	for (i = 0; i < obj->nr_tlb_entries; i++) {
-		struct cr_regs cr;
+	for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, cr) {
 		u32 start;
 		size_t bytes;
 
-		iotlb_lock_get(obj, &l);
-		l.vict = i;
-		iotlb_lock_set(obj, &l);
-		iotlb_read_cr(obj, &cr);
 		if (!iotlb_cr_valid(&cr))
 			continue;
 
@@ -299,7 +320,6 @@
 		if ((start <= da) && (da < start + bytes)) {
 			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
 				__func__, start, da, bytes);
-			iotlb_load_cr(obj, &cr);
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
 		}
 	}
@@ -370,26 +390,19 @@
 static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs, int num)
 {
 	int i;
-	struct iotlb_lock saved, l;
+	struct iotlb_lock saved;
+	struct cr_regs tmp;
 	struct cr_regs *p = crs;
 
 	clk_enable(obj->clk);
-
 	iotlb_lock_get(obj, &saved);
-	memcpy(&l, &saved, sizeof(saved));
-
-	for (i = 0; i < num; i++) {
-		struct cr_regs tmp;
 
-		iotlb_lock_get(obj, &l);
-		l.vict = i;
-		iotlb_lock_set(obj, &l);
-		iotlb_read_cr(obj, &tmp);
+	for_each_iotlb_cr(obj, num, i, tmp) {
 		if (!iotlb_cr_valid(&tmp))
 			continue;
-
 		*p++ = tmp;
 	}
+
 	iotlb_lock_set(obj, &saved);
 	clk_disable(obj->clk);
 
@@ -503,6 +516,12 @@
 {
 	u32 *iopgd = iopgd_offset(obj, da);
 
+	if ((da | pa) & ~IOSECTION_MASK) {
+		dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+			__func__, da, pa, IOSECTION_SIZE);
+		return -EINVAL;
+	}
+
 	*iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
 	flush_iopgd_range(iopgd, iopgd);
 	return 0;
@@ -513,6 +532,12 @@
 	u32 *iopgd = iopgd_offset(obj, da);
 	int i;
 
+	if ((da | pa) & ~IOSUPER_MASK) {
+		dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+			__func__, da, pa, IOSUPER_SIZE);
+		return -EINVAL;
+	}
+
 	for (i = 0; i < 16; i++)
 		*(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
 	flush_iopgd_range(iopgd, iopgd + 15);
@@ -542,6 +567,12 @@
 	u32 *iopte = iopte_alloc(obj, iopgd, da);
 	int i;
 
+	if ((da | pa) & ~IOLARGE_MASK) {
+		dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+			__func__, da, pa, IOLARGE_SIZE);
+		return -EINVAL;
+	}
+
 	if (IS_ERR(iopte))
 		return PTR_ERR(iopte);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/iovmm.c linux-libre-2.6.35-gnu/arch/arm/plat-omap/iovmm.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/iovmm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/iovmm.c	2010-08-01 18:11:14.000000000 -0400
@@ -140,8 +140,10 @@
 		return ERR_PTR(-ENOMEM);
 
 	err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
-	if (err)
+	if (err) {
+		kfree(sgt);
 		return ERR_PTR(err);
+	}
 
 	pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
 
@@ -287,16 +289,19 @@
 	prev_end = 0;
 	list_for_each_entry(tmp, &obj->mmap, list) {
 
-		if ((prev_end <= start) && (start + bytes < tmp->da_start))
+		if (prev_end >= start)
+			break;
+
+		if (start + bytes < tmp->da_start)
 			goto found;
 
 		if (flags & IOVMF_DA_ANON)
-			start = roundup(tmp->da_end, alignement);
+			start = roundup(tmp->da_end + 1, alignement);
 
 		prev_end = tmp->da_end;
 	}
 
-	if ((start >= prev_end) && (ULONG_MAX - start >= bytes))
+	if ((start > prev_end) && (ULONG_MAX - start >= bytes))
 		goto found;
 
 	dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/Kconfig linux-libre-2.6.35-gnu/arch/arm/plat-omap/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -110,8 +110,13 @@
 	tristate
 
 config OMAP_IOMMU_DEBUG
-	depends on OMAP_IOMMU
-	tristate
+       tristate "Export OMAP IOMMU internals in DebugFS"
+       depends on OMAP_IOMMU && DEBUG_FS
+       help
+         Select this to see extensive information about
+         the internal state of OMAP IOMMU in debugfs.
+
+         Say N unless you know you need this.
 
 choice
 	prompt "System timer"
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/mcbsp.c linux-libre-2.6.35-gnu/arch/arm/plat-omap/mcbsp.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/mcbsp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/mcbsp.c	2010-08-01 18:11:14.000000000 -0400
@@ -489,7 +489,7 @@
 {
 	struct omap_mcbsp *mcbsp;
 
-	if (!cpu_is_omap34xx())
+	if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
 		return;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -511,7 +511,7 @@
 {
 	struct omap_mcbsp *mcbsp;
 
-	if (!cpu_is_omap34xx())
+	if (!cpu_is_omap34xx() && !cpu_is_omap44xx())
 		return;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -560,6 +560,61 @@
 }
 EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
 
+#define MCBSP2_FIFO_SIZE	0x500 /* 1024 + 256 locations */
+#define MCBSP1345_FIFO_SIZE	0x80  /* 128 locations */
+/*
+ * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO
+ */
+u16 omap_mcbsp_get_tx_delay(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+	u16 buffstat;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	/* Returns the number of free locations in the buffer */
+	buffstat = MCBSP_READ(mcbsp, XBUFFSTAT);
+
+	/* Number of slots are different in McBSP ports */
+	if (mcbsp->id == 2)
+		return MCBSP2_FIFO_SIZE - buffstat;
+	else
+		return MCBSP1345_FIFO_SIZE - buffstat;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_tx_delay);
+
+/*
+ * omap_mcbsp_get_rx_delay returns the number of free slots in the McBSP FIFO
+ * to reach the threshold value (when the DMA will be triggered to read it)
+ */
+u16 omap_mcbsp_get_rx_delay(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+	u16 buffstat, threshold;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	/* Returns the number of used locations in the buffer */
+	buffstat = MCBSP_READ(mcbsp, RBUFFSTAT);
+	/* RX threshold */
+	threshold = MCBSP_READ(mcbsp, THRSH1);
+
+	/* Return the number of location till we reach the threshold limit */
+	if (threshold <= buffstat)
+		return 0;
+	else
+		return threshold - buffstat;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_rx_delay);
+
 /*
  * omap_mcbsp_get_dma_op_mode just return the current configured
  * operating mode for the mcbsp channel
@@ -587,7 +642,7 @@
 	 * Enable wakup behavior, smart idle and all wakeups
 	 * REVISIT: some wakeups may be unnecessary
 	 */
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		u16 syscon;
 
 		syscon = MCBSP_READ(mcbsp, SYSCON);
@@ -610,7 +665,7 @@
 	/*
 	 * Disable wakup behavior, smart idle and all wakeups
 	 */
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		u16 syscon;
 
 		syscon = MCBSP_READ(mcbsp, SYSCON);
@@ -724,14 +779,17 @@
 			goto err_clk_disable;
 		}
 
-		init_completion(&mcbsp->rx_irq_completion);
-		err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler,
+		if (mcbsp->rx_irq) {
+			init_completion(&mcbsp->rx_irq_completion);
+			err = request_irq(mcbsp->rx_irq,
+					omap_mcbsp_rx_irq_handler,
 					0, "McBSP", (void *)mcbsp);
-		if (err != 0) {
-			dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
-					"for McBSP%d\n", mcbsp->rx_irq,
-					mcbsp->id);
-			goto err_free_irq;
+			if (err != 0) {
+				dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
+						"for McBSP%d\n", mcbsp->rx_irq,
+						mcbsp->id);
+				goto err_free_irq;
+			}
 		}
 	}
 
@@ -781,7 +839,8 @@
 
 	if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) {
 		/* Free IRQs */
-		free_irq(mcbsp->rx_irq, (void *)mcbsp);
+		if (mcbsp->rx_irq)
+			free_irq(mcbsp->rx_irq, (void *)mcbsp);
 		free_irq(mcbsp->tx_irq, (void *)mcbsp);
 	}
 
@@ -855,7 +914,7 @@
 		MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
 	}
 
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		/* Release the transmitter and receiver */
 		w = MCBSP_READ_CACHE(mcbsp, XCCR);
 		w &= ~(tx ? XDISABLE : 0);
@@ -885,7 +944,7 @@
 
 	/* Reset transmitter */
 	tx &= 1;
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		w = MCBSP_READ_CACHE(mcbsp, XCCR);
 		w |= (tx ? XDISABLE : 0);
 		MCBSP_WRITE(mcbsp, XCCR, w);
@@ -895,7 +954,7 @@
 
 	/* Reset receiver */
 	rx &= 1;
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		w = MCBSP_READ_CACHE(mcbsp, RCCR);
 		w |= (rx ? RDISABLE : 0);
 		MCBSP_WRITE(mcbsp, RCCR, w);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/omap_device.c linux-libre-2.6.35-gnu/arch/arm/plat-omap/omap_device.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/omap_device.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/omap_device.c	2010-08-01 18:11:14.000000000 -0400
@@ -2,10 +2,10 @@
  * omap_device implementation
  *
  * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
+ * Paul Walmsley, Kevin Hilman
  *
  * Developed in collaboration with (alphabetical order): Benoit
- * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram
  * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
  * Woodruff
  *
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-omap/sram.c linux-libre-2.6.35-gnu/arch/arm/plat-omap/sram.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-omap/sram.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-omap/sram.c	2010-08-01 18:11:14.000000000 -0400
@@ -437,6 +437,20 @@
 }
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+int __init omap44xx_sram_init(void)
+{
+	printk(KERN_ERR "FIXME: %s not implemented\n", __func__);
+
+	return -ENODEV;
+}
+#else
+static inline int omap44xx_sram_init(void)
+{
+	return 0;
+}
+#endif
+
 int __init omap_sram_init(void)
 {
 	omap_detect_sram();
@@ -451,7 +465,7 @@
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();
 	else if (cpu_is_omap44xx())
-		omap34xx_sram_init(); /* FIXME: */
+		omap44xx_sram_init();
 
 	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-orion/include/plat/orion_nand.h linux-libre-2.6.35-gnu/arch/arm/plat-orion/include/plat/orion_nand.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-orion/include/plat/orion_nand.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-orion/include/plat/orion_nand.h	2010-08-01 18:11:14.000000000 -0400
@@ -14,6 +14,7 @@
  */
 struct orion_nand_data {
 	struct mtd_partition *parts;
+	int (*dev_ready)(struct mtd_info *mtd);
 	u32 nr_parts;
 	u8 ale;		/* address line number connected to ALE */
 	u8 cle;		/* address line number connected to CLE */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-pxa/include/plat/mfp.h linux-libre-2.6.35-gnu/arch/arm/plat-pxa/include/plat/mfp.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-pxa/include/plat/mfp.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-pxa/include/plat/mfp.h	2010-08-01 18:11:14.000000000 -0400
@@ -316,6 +316,13 @@
 	MFP_PIN_PMIC_INT,
 	MFP_PIN_RDY,
 
+	/* additional pins on MMP2 */
+	MFP_PIN_TWSI1_SCL,
+	MFP_PIN_TWSI1_SDA,
+	MFP_PIN_TWSI4_SCL,
+	MFP_PIN_TWSI4_SDA,
+	MFP_PIN_CLK_REQ,
+
 	MFP_PIN_MAX,
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-pxa/include/plat/ssp.h linux-libre-2.6.35-gnu/arch/arm/plat-pxa/include/plat/ssp.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-pxa/include/plat/ssp.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-pxa/include/plat/ssp.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,186 @@
+/*
+ *  ssp.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver supports the following PXA CPU/SSP ports:-
+ *
+ *       PXA250     SSP
+ *       PXA255     SSP, NSSP
+ *       PXA26x     SSP, NSSP, ASSP
+ *       PXA27x     SSP1, SSP2, SSP3
+ *       PXA3xx     SSP1, SSP2, SSP3, SSP4
+ */
+
+#ifndef __ASM_ARCH_SSP_H
+#define __ASM_ARCH_SSP_H
+
+#include <linux/list.h>
+#include <linux/io.h>
+
+/*
+ * SSP Serial Port Registers
+ * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
+ * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ */
+
+#define SSCR0		(0x00)  /* SSP Control Register 0 */
+#define SSCR1		(0x04)  /* SSP Control Register 1 */
+#define SSSR		(0x08)  /* SSP Status Register */
+#define SSITR		(0x0C)  /* SSP Interrupt Test Register */
+#define SSDR		(0x10)  /* SSP Data Write/Data Read Register */
+
+#define SSTO		(0x28)  /* SSP Time Out Register */
+#define SSPSP		(0x2C)  /* SSP Programmable Serial Protocol */
+#define SSTSA		(0x30)  /* SSP Tx Timeslot Active */
+#define SSRSA		(0x34)  /* SSP Rx Timeslot Active */
+#define SSTSS		(0x38)  /* SSP Timeslot Status */
+#define SSACD		(0x3C)  /* SSP Audio Clock Divider */
+#define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */
+
+/* Common PXA2xx bits first */
+#define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
+#define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
+#define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
+#define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
+#define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
+#define SSCR0_National	(0x2 << 4)	/* National Microwire */
+#define SSCR0_ECS	(1 << 6)	/* External clock select */
+#define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
+#define SSCR0_SCR(x)	((x) << 8)	/* Serial Clock Rate (mask) */
+
+/* PXA27x, PXA3xx */
+#define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
+#define SSCR0_NCS	(1 << 21)	/* Network clock select */
+#define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
+#define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
+#define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
+#define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
+#define SSCR0_ACS	(1 << 30)	/* Audio clock select */
+#define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
+
+
+#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
+#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
+#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
+#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
+#define SSSR_BSY	(1 << 4)	/* SSP Busy */
+#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
+#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
+#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
+
+
+/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
+#define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
+#define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
+#define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
+#define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
+#define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
+#define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
+#define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
+#define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
+#define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
+#define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
+#define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
+#define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
+#define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
+#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
+#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
+#define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
+#define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
+
+#define SSSR_BCE		(1 << 23)	/* Bit Count Error */
+#define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
+#define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
+#define SSSR_EOC		(1 << 20)	/* End Of Chain */
+#define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
+#define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
+
+
+#define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
+#define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
+#define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
+#define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
+#define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
+#define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
+#define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
+#define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
+#define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
+
+/* PXA3xx */
+#define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
+#define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
+#define SSPSP_TIMING_MASK	(0x7f8001f0)
+
+#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
+#define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
+#define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
+
+enum pxa_ssp_type {
+	SSP_UNDEFINED = 0,
+	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
+	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
+	PXA27x_SSP,
+	PXA168_SSP,
+};
+
+struct ssp_device {
+	struct platform_device *pdev;
+	struct list_head	node;
+
+	struct clk	*clk;
+	void __iomem	*mmio_base;
+	unsigned long	phys_base;
+
+	const char	*label;
+	int		port_id;
+	int		type;
+	int		use_count;
+	int		irq;
+	int		drcmr_rx;
+	int		drcmr_tx;
+};
+
+/**
+ * pxa_ssp_write_reg - Write to a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to write to
+ * @val: Value to be written.
+ */
+static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
+{
+	__raw_writel(val, dev->mmio_base + reg);
+}
+
+/**
+ * pxa_ssp_read_reg - Read from a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to read from
+ */
+static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
+{
+	return __raw_readl(dev->mmio_base + reg);
+}
+
+struct ssp_device *pxa_ssp_request(int port, const char *label);
+void pxa_ssp_free(struct ssp_device *);
+#endif /* __ASM_ARCH_SSP_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-pxa/Kconfig linux-libre-2.6.35-gnu/arch/arm/plat-pxa/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/plat-pxa/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-pxa/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,3 +1,8 @@
 if PLAT_PXA
 
+config PXA_SSP
+	tristate
+	help
+	  Enable support for PXA2xx SSP ports
+
 endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-pxa/Makefile linux-libre-2.6.35-gnu/arch/arm/plat-pxa/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/plat-pxa/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-pxa/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -4,8 +4,10 @@
 
 obj-y	:= dma.o
 
+obj-$(CONFIG_ARCH_PXA)		+= pmu.o
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
 
 obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+obj-$(CONFIG_PXA_SSP)		+= ssp.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-pxa/mfp.c linux-libre-2.6.35-gnu/arch/arm/plat-pxa/mfp.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-pxa/mfp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-pxa/mfp.c	2010-08-01 18:11:14.000000000 -0400
@@ -110,6 +110,7 @@
 	MFPR_LPM_PULL_LOW,
 	MFPR_LPM_PULL_HIGH,
 	MFPR_LPM_FLOAT,
+	MFPR_LPM_INPUT,
 };
 
 /* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-pxa/pmu.c linux-libre-2.6.35-gnu/arch/arm/plat-pxa/pmu.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-pxa/pmu.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-pxa/pmu.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,33 @@
+/*
+ * PMU IRQ registration for the PXA xscale PMU families.
+ * Copyright (C) 2010 Will Deacon, ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/pmu.h>
+#include <mach/irqs.h>
+
+static struct resource pmu_resource = {
+	.start	= IRQ_PMU,
+	.end	= IRQ_PMU,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.resource	= &pmu_resource,
+	.num_resources	= 1,
+};
+
+static int __init pxa_pmu_init(void)
+{
+	platform_device_register(&pmu_device);
+	return 0;
+}
+arch_initcall(pxa_pmu_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-pxa/ssp.c linux-libre-2.6.35-gnu/arch/arm/plat-pxa/ssp.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-pxa/ssp.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-pxa/ssp.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,224 @@
+/*
+ *  linux/arch/arm/mach-pxa/ssp.c
+ *
+ *  based on linux/arch/arm/mach-sa1100/ssp.c by Russell King
+ *
+ *  Copyright (C) 2003 Russell King.
+ *  Copyright (C) 2003 Wolfson Microelectronics PLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  PXA2xx SSP driver.  This provides the generic core for simple
+ *  IO-based SSP applications and allows easy port setup for DMA access.
+ *
+ *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <plat/ssp.h>
+
+static DEFINE_MUTEX(ssp_lock);
+static LIST_HEAD(ssp_list);
+
+struct ssp_device *pxa_ssp_request(int port, const char *label)
+{
+	struct ssp_device *ssp = NULL;
+
+	mutex_lock(&ssp_lock);
+
+	list_for_each_entry(ssp, &ssp_list, node) {
+		if (ssp->port_id == port && ssp->use_count == 0) {
+			ssp->use_count++;
+			ssp->label = label;
+			break;
+		}
+	}
+
+	mutex_unlock(&ssp_lock);
+
+	if (&ssp->node == &ssp_list)
+		return NULL;
+
+	return ssp;
+}
+EXPORT_SYMBOL(pxa_ssp_request);
+
+void pxa_ssp_free(struct ssp_device *ssp)
+{
+	mutex_lock(&ssp_lock);
+	if (ssp->use_count) {
+		ssp->use_count--;
+		ssp->label = NULL;
+	} else
+		dev_err(&ssp->pdev->dev, "device already free\n");
+	mutex_unlock(&ssp_lock);
+}
+EXPORT_SYMBOL(pxa_ssp_free);
+
+static int __devinit pxa_ssp_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct resource *res;
+	struct ssp_device *ssp;
+	int ret = 0;
+
+	ssp = kzalloc(sizeof(struct ssp_device), GFP_KERNEL);
+	if (ssp == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory");
+		return -ENOMEM;
+	}
+	ssp->pdev = pdev;
+
+	ssp->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ssp->clk)) {
+		ret = PTR_ERR(ssp->clk);
+		goto err_free;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no SSP RX DRCMR defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+	ssp->drcmr_rx = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no SSP TX DRCMR defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+	ssp->drcmr_tx = res->start;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+
+	res = request_mem_region(res->start, resource_size(res),
+			pdev->name);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		ret = -EBUSY;
+		goto err_free_clk;
+	}
+
+	ssp->phys_base = res->start;
+
+	ssp->mmio_base = ioremap(res->start, resource_size(res));
+	if (ssp->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap() registers\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
+
+	ssp->irq = platform_get_irq(pdev, 0);
+	if (ssp->irq < 0) {
+		dev_err(&pdev->dev, "no IRQ resource defined\n");
+		ret = -ENODEV;
+		goto err_free_io;
+	}
+
+	/* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
+	 * starts from 0, do a translation here
+	 */
+	ssp->port_id = pdev->id + 1;
+	ssp->use_count = 0;
+	ssp->type = (int)id->driver_data;
+
+	mutex_lock(&ssp_lock);
+	list_add(&ssp->node, &ssp_list);
+	mutex_unlock(&ssp_lock);
+
+	platform_set_drvdata(pdev, ssp);
+	return 0;
+
+err_free_io:
+	iounmap(ssp->mmio_base);
+err_free_mem:
+	release_mem_region(res->start, resource_size(res));
+err_free_clk:
+	clk_put(ssp->clk);
+err_free:
+	kfree(ssp);
+	return ret;
+}
+
+static int __devexit pxa_ssp_remove(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct ssp_device *ssp;
+
+	ssp = platform_get_drvdata(pdev);
+	if (ssp == NULL)
+		return -ENODEV;
+
+	iounmap(ssp->mmio_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	clk_put(ssp->clk);
+
+	mutex_lock(&ssp_lock);
+	list_del(&ssp->node);
+	mutex_unlock(&ssp_lock);
+
+	kfree(ssp);
+	return 0;
+}
+
+static const struct platform_device_id ssp_id_table[] = {
+	{ "pxa25x-ssp",		PXA25x_SSP },
+	{ "pxa25x-nssp",	PXA25x_NSSP },
+	{ "pxa27x-ssp",		PXA27x_SSP },
+	{ "pxa168-ssp",		PXA168_SSP },
+	{ },
+};
+
+static struct platform_driver pxa_ssp_driver = {
+	.probe		= pxa_ssp_probe,
+	.remove		= __devexit_p(pxa_ssp_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "pxa2xx-ssp",
+	},
+	.id_table	= ssp_id_table,
+};
+
+static int __init pxa_ssp_init(void)
+{
+	return platform_driver_register(&pxa_ssp_driver);
+}
+
+static void __exit pxa_ssp_exit(void)
+{
+	platform_driver_unregister(&pxa_ssp_driver);
+}
+
+arch_initcall(pxa_ssp_init);
+module_exit(pxa_ssp_exit);
+
+MODULE_DESCRIPTION("PXA SSP driver");
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_LICENSE("GPL");
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/common-smdk.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/common-smdk.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/common-smdk.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/common-smdk.c	2010-08-01 18:11:14.000000000 -0400
@@ -42,6 +42,7 @@
 #include <plat/nand.h>
 
 #include <plat/common-smdk.h>
+#include <plat/gpio-cfg.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 
@@ -185,10 +186,10 @@
 {
 	/* Configure the LEDs (even if we have no LED support)*/
 
-	s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
+	s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
 
 	s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
 	s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/cpu.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/cpu.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/cpu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/cpu.c	2010-08-01 18:11:14.000000000 -0400
@@ -49,6 +49,7 @@
 #include <plat/s3c2400.h>
 #include <plat/s3c2410.h>
 #include <plat/s3c2412.h>
+#include <plat/s3c2416.h>
 #include <plat/s3c244x.h>
 #include <plat/s3c2443.h>
 
@@ -57,6 +58,7 @@
 static const char name_s3c2400[]  = "S3C2400";
 static const char name_s3c2410[]  = "S3C2410";
 static const char name_s3c2412[]  = "S3C2412";
+static const char name_s3c2416[]  = "S3C2416/S3C2450";
 static const char name_s3c2440[]  = "S3C2440";
 static const char name_s3c2442[]  = "S3C2442";
 static const char name_s3c2442b[]  = "S3C2442B";
@@ -137,6 +139,15 @@
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
 	},
+	{			/* a strange version of the s3c2416 */
+		.idcode		= 0x32450003,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c2416_map_io,
+		.init_clocks	= s3c2416_init_clocks,
+		.init_uarts	= s3c2416_init_uarts,
+		.init		= s3c2416_init,
+		.name		= name_s3c2416,
+	},
 	{
 		.idcode		= 0x32443001,
 		.idmask		= 0xffffffff,
@@ -170,6 +181,16 @@
 
 static unsigned long s3c24xx_read_idcode_v5(void)
 {
+#if defined(CONFIG_CPU_S3C2416)
+	/* s3c2416 is v5, with S3C24XX_GSTATUS1 instead of S3C2412_GSTATUS1 */
+
+	u32 gs = __raw_readl(S3C24XX_GSTATUS1);
+
+	/* test for s3c2416 or similar device */
+	if ((gs >> 16) == 0x3245)
+		return gs;
+#endif
+
 #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
 	return __raw_readl(S3C2412_GSTATUS1);
 #else
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/devs.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/devs.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/devs.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/devs.c	2010-08-01 18:11:14.000000000 -0400
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/string.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -38,8 +39,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/regs-spi.h>
-
-#include <mach/ts.h>
+#include <plat/ts.h>
 
 /* Serial port registrations */
 
@@ -149,10 +149,14 @@
 {
 	struct s3c2410fb_mach_info *npd;
 
-	npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+	npd = kmemdup(pd, sizeof(*npd), GFP_KERNEL);
 	if (npd) {
-		memcpy(npd, pd, sizeof(*npd));
 		s3c_device_lcd.dev.platform_data = npd;
+		npd->displays = kmemdup(pd->displays,
+			sizeof(struct s3c2410fb_display) * npd->num_displays,
+			GFP_KERNEL);
+		if (!npd->displays)
+			printk(KERN_ERR "no memory for LCD display data\n");
 	} else {
 		printk(KERN_ERR "no memory for LCD platform data\n");
 	}
@@ -230,32 +234,6 @@
 	}
 }
 
-
-/* Watchdog */
-
-static struct resource s3c_wdt_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_WATCHDOG,
-		.end   = S3C24XX_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_WDT,
-		.end   = IRQ_WDT,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device s3c_device_wdt = {
-	.name		  = "s3c2410-wdt",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_wdt_resource),
-	.resource	  = s3c_wdt_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_wdt);
-
 /* IIS */
 
 static struct resource s3c_iis_resource[] = {
@@ -338,14 +316,6 @@
 	.resource	  = s3c_adc_resource,
 };
 
-/* HWMON */
-
-struct platform_device s3c_device_hwmon = {
-	.name		= "s3c-hwmon",
-	.id		= -1,
-	.dev.parent	= &s3c_device_adc.dev,
-};
-
 /* SDI */
 
 static struct resource s3c_sdi_resource[] = {
@@ -371,7 +341,7 @@
 
 EXPORT_SYMBOL(s3c_device_sdi);
 
-void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
 {
 	struct s3c24xx_mci_pdata *npd;
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/dma.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/dma.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/dma.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -1104,7 +1104,7 @@
  * devaddr:   physical address of the source
 */
 
-int s3c2410_dma_devconfig(int channel,
+int s3c2410_dma_devconfig(unsigned int channel,
 			  enum s3c2410_dmasrc source,
 			  unsigned long devaddr)
 {
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/gpio.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/gpio.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2004-2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX GPIO support
@@ -20,12 +20,12 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
-
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -34,133 +34,46 @@
 
 #include <mach/regs-gpio.h>
 
-void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long mask;
-	unsigned long con;
-	unsigned long flags;
-
-	if (pin < S3C2410_GPIO_BANKB) {
-		mask = 1 << S3C2410_GPIO_OFFSET(pin);
-	} else {
-		mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
-	}
-
-	switch (function) {
-	case S3C2410_GPIO_LEAVE:
-		mask = 0;
-		function = 0;
-		break;
-
-	case S3C2410_GPIO_INPUT:
-	case S3C2410_GPIO_OUTPUT:
-	case S3C2410_GPIO_SFN2:
-	case S3C2410_GPIO_SFN3:
-		if (pin < S3C2410_GPIO_BANKB) {
-			function -= 1;
-			function &= 1;
-			function <<= S3C2410_GPIO_OFFSET(pin);
-		} else {
-			function &= 3;
-			function <<= S3C2410_GPIO_OFFSET(pin)*2;
-		}
-	}
-
-	/* modify the specified register wwith IRQs off */
-
-	local_irq_save(flags);
-
-	con  = __raw_readl(base + 0x00);
-	con &= ~mask;
-	con |= function;
-
-	__raw_writel(con, base + 0x00);
-
-	local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
-
-unsigned int s3c2410_gpio_getcfg(unsigned int pin)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long val = __raw_readl(base);
-
-	if (pin < S3C2410_GPIO_BANKB) {
-		val >>= S3C2410_GPIO_OFFSET(pin);
-		val &= 1;
-		val += 1;
-	} else {
-		val >>= S3C2410_GPIO_OFFSET(pin)*2;
-		val &= 3;
-	}
-
-	return val | S3C2410_GPIO_INPUT;
-}
+#include <plat/gpio-core.h>
 
-EXPORT_SYMBOL(s3c2410_gpio_getcfg);
+/* gpiolib wrappers until these are totally eliminated */
 
 void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
-	unsigned long flags;
-	unsigned long up;
-
-	if (pin < S3C2410_GPIO_BANKB)
-		return;
+	int ret;
 
-	local_irq_save(flags);
+	WARN_ON(to);	/* should be none of these left */
 
-	up = __raw_readl(base + 0x08);
-	up &= ~(1L << offs);
-	up |= to << offs;
-	__raw_writel(up, base + 0x08);
+	if (!to) {
+		/* if pull is enabled, try first with up, and if that
+		 * fails, try using down */
 
-	local_irq_restore(flags);
+		ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP);
+		if (ret)
+			s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN);
+	} else {
+		s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE);
+	}
 }
-
 EXPORT_SYMBOL(s3c2410_gpio_pullup);
 
-int s3c2410_gpio_getpull(unsigned int pin)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
-
-	if (pin < S3C2410_GPIO_BANKB)
-		return -EINVAL;
-
-	return (__raw_readl(base + 0x08) & (1L << offs)) ? 1 : 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getpull);
-
 void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
-	unsigned long flags;
-	unsigned long dat;
-
-	local_irq_save(flags);
-
-	dat = __raw_readl(base + 0x04);
-	dat &= ~(1 << offs);
-	dat |= to << offs;
-	__raw_writel(dat, base + 0x04);
+	/* do this via gpiolib until all users removed */
 
-	local_irq_restore(flags);
+	gpio_request(pin, "temporary");
+	gpio_set_value(pin, to);
+	gpio_free(pin);
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_setpin);
 
 unsigned int s3c2410_gpio_getpin(unsigned int pin)
 {
-	void __iomem *base = S3C24XX_GPIO_BASE(pin);
-	unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long offs = pin - chip->chip.base;
 
-	return __raw_readl(base + 0x04) & (1<< offs);
+	return __raw_readl(chip->base + 0x04) & (1<< offs);
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_getpin);
@@ -181,22 +94,3 @@
 }
 
 EXPORT_SYMBOL(s3c2410_modify_misccr);
-
-int s3c2410_gpio_getirq(unsigned int pin)
-{
-	if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
-		return -EINVAL;	/* not valid interrupts */
-
-	if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
-		return -EINVAL;	/* not valid pin */
-
-	if (pin < S3C2410_GPF(4))
-		return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
-
-	if (pin < S3C2410_GPG(0))
-		return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
-
-	return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getirq);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/gpiolib.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/gpiolib.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/gpiolib.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/gpiolib.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/gpiolib.c
  *
- * Copyright (c) 2008 Simtec Electronics
+ * Copyright (c) 2008-2010 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -21,6 +21,8 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <plat/pm.h>
@@ -77,10 +79,21 @@
 	return IRQ_EINT8 + offset;
 }
 
+static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
+	.set_config	= s3c_gpio_setcfg_s3c24xx_a,
+	.get_config	= s3c_gpio_getcfg_s3c24xx_a,
+};
+
+struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
+	.set_config	= s3c_gpio_setcfg_s3c24xx,
+	.get_config	= s3c_gpio_getcfg_s3c24xx,
+};
+
 struct s3c_gpio_chip s3c24xx_gpios[] = {
 	[0] = {
 		.base	= S3C2410_GPACON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
+		.config	= &s3c24xx_gpiocfg_banka,
 		.chip	= {
 			.base			= S3C2410_GPA(0),
 			.owner			= THIS_MODULE,
@@ -161,15 +174,58 @@
 			.ngpio			= 11,
 		},
 	},
+		/* GPIOS for the S3C2443 and later devices. */
+	{
+		.base	= S3C2440_GPJCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPJ(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOJ",
+			.ngpio			= 16,
+		},
+	}, {
+		.base	= S3C2443_GPKCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPK(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOK",
+			.ngpio			= 16,
+		},
+	}, {
+		.base	= S3C2443_GPLCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPL(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOL",
+			.ngpio			= 15,
+		},
+	}, {
+		.base	= S3C2443_GPMCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPM(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOM",
+			.ngpio			= 2,
+		},
+	},
 };
 
+
 static __init int s3c24xx_gpiolib_init(void)
 {
 	struct s3c_gpio_chip *chip = s3c24xx_gpios;
 	int gpn;
 
-	for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++)
+	for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) {
+		if (!chip->config)
+			chip->config = &s3c24xx_gpiocfg_default;
+
 		s3c_gpiolib_add(chip);
+	}
 
 	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/include/plat/pll.h linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/include/plat/pll.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/include/plat/pll.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/include/plat/pll.h	2010-08-01 18:11:14.000000000 -0400
@@ -35,3 +35,28 @@
 
 	return (unsigned int)fvco;
 }
+
+#define S3C2416_PLL_M_SHIFT	(14)
+#define S3C2416_PLL_P_SHIFT	(5)
+#define S3C2416_PLL_S_MASK	(7)
+#define S3C2416_PLL_M_MASK	((1 << 10) - 1)
+#define S3C2416_PLL_P_MASK	(63)
+
+static inline unsigned int
+s3c2416_get_pll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int m, p, s;
+	uint64_t fvco;
+
+	m = pllval >> S3C2416_PLL_M_SHIFT;
+	p = pllval >> S3C2416_PLL_P_SHIFT;
+
+	s = pllval & S3C2416_PLL_S_MASK;
+	m &= S3C2416_PLL_M_MASK;
+	p &= S3C2416_PLL_P_MASK;
+
+	fvco = (uint64_t)baseclk * m;
+	do_div(fvco, (p << s));
+
+	return (unsigned int)fvco;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/include/plat/s3c2416.h linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/include/plat/s3c2416.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/include/plat/s3c2416.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/include/plat/s3c2416.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+ *
+ * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>
+ *
+ * Header file for s3c2416 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2416
+
+struct s3c2410_uartcfg;
+
+extern  int s3c2416_init(void);
+
+extern void s3c2416_map_io(void);
+
+extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2416_init_clocks(int xtal);
+
+extern  int s3c2416_baseclk_add(void);
+
+#else
+#define s3c2416_init_clocks NULL
+#define s3c2416_init_uarts NULL
+#define s3c2416_map_io NULL
+#define s3c2416_init NULL
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/include/plat/s3c2443.h linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/include/plat/s3c2443.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/include/plat/s3c2443.h	2010-08-01 18:11:14.000000000 -0400
@@ -30,3 +30,22 @@
 #define s3c2443_map_io NULL
 #define s3c2443_init NULL
 #endif
+
+/* common code used by s3c2443 and others.
+ * note, not to be used outside of arch/arm/mach-s3c* */
+
+struct clk;	/* some files don't need clk.h otherwise */
+
+typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
+typedef unsigned int (*fdiv_fn)(unsigned long clkcon0);
+
+extern void s3c2443_common_setup_clocks(pll_fn get_mpll, fdiv_fn fdiv);
+extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, fdiv_fn fdiv);
+
+extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
+extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
+
+extern struct clksrc_clk clk_epllref;
+extern struct clksrc_clk clk_esysclk;
+extern struct clksrc_clk clk_msysclk;
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/Kconfig linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -9,6 +9,7 @@
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_DEVICE_NAND
+	select S3C_GPIO_CFG_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
@@ -44,6 +45,12 @@
 	  Clock code for the S3C2410, and similar processors which
 	  is currently includes the S3C2410, S3C2440, S3C2442.
 
+config S3C2443_CLOCK
+	bool
+	help
+	  Clock code for the S3C2443 and similar processors, which includes
+	  the S3C2416 and S3C2450.
+
 config S3C24XX_DCLK
 	bool
 	help
@@ -157,4 +164,9 @@
 	help
 	  Add audio devices for common Simtec S3C24XX boards
 
+config S3C2410_SETUP_TS
+	bool
+	help
+	  Compile in platform device definition for Samsung TouchScreen.
+
 endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/Makefile linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -30,6 +30,7 @@
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
+obj-$(CONFIG_S3C2443_CLOCK)	+= s3c2443-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
@@ -37,6 +38,7 @@
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
+obj-$(CONFIG_S3C2410_SETUP_TS)	+= setup-ts.o
 
 # SPI gpio central GPIO functions
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/pm.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/pm.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/pm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/pm.c	2010-08-01 18:11:14.000000000 -0400
@@ -43,6 +43,7 @@
 
 #include <asm/mach/time.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/pm.h>
 
 #define PFX "s3c24xx-pm: "
@@ -90,22 +91,22 @@
 {
 	unsigned long irqstate;
 	unsigned long pinstate;
-	int irq = s3c2410_gpio_getirq(pin);
+	int irq = gpio_to_irq(pin);
 
 	if (irqoffs < 4)
 		irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
 	else
 		irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
 
-	pinstate = s3c2410_gpio_getcfg(pin);
+	pinstate = s3c_gpio_getcfg(pin);
 
 	if (!irqstate) {
 		if (pinstate == S3C2410_GPIO_IRQ)
-			S3C_PMDBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
+			S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin);
 	} else {
 		if (pinstate == S3C2410_GPIO_IRQ) {
 			S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
-			s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
+			s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
 		}
 	}
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/s3c2410-clock.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/s3c2410-clock.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/s3c2410-clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/s3c2410-clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -87,7 +87,7 @@
 
 /* standard clock definitions */
 
-static struct clk init_clocks_disable[] = {
+static struct clk init_clocks_off[] = {
 	{
 		.name		= "nand",
 		.id		= -1,
@@ -249,17 +249,8 @@
 
 	/* install (and disable) the clocks we do not need immediately */
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2410_clkcon_enable(clkp, 0);
-	}
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
 	/* show the clock-slow value */
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/s3c2443-clock.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/s3c2443-clock.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/s3c2443-clock.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/s3c2443-clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,472 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c
+ *
+ * Copyright (c) 2007, 2010 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2443 Clock control suport - common code
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/s3c2443.h>
+#include <plat/clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/cpu.h>
+
+#include <plat/cpu-freq.h>
+
+
+static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
+{
+	u32 ctrlbit = clk->ctrlbit;
+	u32 con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
+{
+	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
+}
+
+int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
+{
+	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
+}
+
+int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
+{
+	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
+}
+
+/* mpllref is a direct descendant of clk_xtal by default, but it is not
+ * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
+ * such directly equating the two source clocks is impossible.
+ */
+struct clk clk_mpllref = {
+	.name		= "mpllref",
+	.parent		= &clk_xtal,
+	.id		= -1,
+};
+
+static struct clk *clk_epllref_sources[] = {
+	[0] = &clk_mpllref,
+	[1] = &clk_mpllref,
+	[2] = &clk_xtal,
+	[3] = &clk_ext,
+};
+
+struct clksrc_clk clk_epllref = {
+	.clk	= {
+		.name		= "epllref",
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_epllref_sources,
+		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
+};
+
+/* esysclk
+ *
+ * this is sourced from either the EPLL or the EPLLref clock
+*/
+
+static struct clk *clk_sysclk_sources[] = {
+	[0] = &clk_epllref.clk,
+	[1] = &clk_epll,
+};
+
+struct clksrc_clk clk_esysclk = {
+	.clk	= {
+		.name		= "esysclk",
+		.parent		= &clk_epll,
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_sysclk_sources,
+		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
+};
+
+static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
+
+	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
+	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
+
+	return parent_rate / (div + 1);
+}
+
+static struct clk clk_mdivclk = {
+	.name		= "mdivclk",
+	.parent		= &clk_mpllref,
+	.id		= -1,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2443_getrate_mdivclk,
+	},
+};
+
+static struct clk *clk_msysclk_sources[] = {
+	[0] = &clk_mpllref,
+	[1] = &clk_mpll,
+	[2] = &clk_mdivclk,
+	[3] = &clk_mpllref,
+};
+
+struct clksrc_clk clk_msysclk = {
+	.clk	= {
+		.name		= "msysclk",
+		.parent		= &clk_xtal,
+		.id		= -1,
+	},
+	.sources = &(struct clksrc_sources) {
+		.sources = clk_msysclk_sources,
+		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
+	},
+	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
+};
+
+/* prediv
+ *
+ * this divides the msysclk down to pass to h/p/etc.
+ */
+
+static unsigned long s3c2443_prediv_getrate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+
+	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
+	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+
+	return rate / (clkdiv0 + 1);
+}
+
+static struct clk clk_prediv = {
+	.name		= "prediv",
+	.id		= -1,
+	.parent		= &clk_msysclk.clk,
+	.ops		= &(struct clk_ops) {
+		.get_rate	= s3c2443_prediv_getrate,
+	},
+};
+
+/* usbhost
+ *
+ * usb host bus-clock, usually 48MHz to provide USB bus clock timing
+*/
+
+static struct clksrc_clk clk_usb_bus_host = {
+	.clk	= {
+		.name		= "usb-bus-host-parent",
+		.id		= -1,
+		.parent		= &clk_esysclk.clk,
+		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
+		.enable		= s3c2443_clkcon_enable_s,
+	},
+	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
+};
+
+/* common clksrc clocks */
+
+static struct clksrc_clk clksrc_clks[] = {
+	{
+		/* ART baud-rate clock sourced from esysclk via a divisor */
+		.clk	= {
+			.name		= "uartclk",
+			.id		= -1,
+			.parent		= &clk_esysclk.clk,
+		},
+		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
+	}, {
+		/* camera interface bus-clock, divided down from esysclk */
+		.clk	= {
+			.name		= "camif-upll",	/* same as 2440 name */
+			.id		= -1,
+			.parent		= &clk_esysclk.clk,
+			.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
+			.enable		= s3c2443_clkcon_enable_s,
+		},
+		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
+	}, {
+		.clk	= {
+			.name		= "display-if",
+			.id		= -1,
+			.parent		= &clk_esysclk.clk,
+			.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
+			.enable		= s3c2443_clkcon_enable_s,
+		},
+		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
+	},
+};
+
+
+static struct clk init_clocks_off[] = {
+	{
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_ADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_IIC,
+	}
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "dma",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA0,
+	}, {
+		.name		= "dma",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA1,
+	}, {
+		.name		= "dma",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA2,
+	}, {
+		.name		= "dma",
+		.id		= 3,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA3,
+	}, {
+		.name		= "dma",
+		.id		= 4,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA4,
+	}, {
+		.name		= "dma",
+		.id		= 5,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_DMA5,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_HSMMC,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_USBH,
+	}, {
+		.name		= "usb-device",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_USBD,
+	}, {
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_LCDC,
+
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_PWMT,
+	}, {
+		.name		= "cfc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_CFC,
+	}, {
+		.name		= "ssmc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c2443_clkcon_enable_h,
+		.ctrlbit	= S3C2443_HCLKCON_SSMC,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_UART3,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c2443_clkcon_enable_p,
+		.ctrlbit	= S3C2443_PCLKCON_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C2443_PCLKCON_WDT,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C2443_PCLKCON_AC97,
+	}, {
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+	}, {
+		.name		= "usb-bus-host",
+		.id		= -1,
+		.parent		= &clk_usb_bus_host.clk,
+	}
+};
+
+static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
+{
+	clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
+
+	return clkcon0 + 1;
+}
+
+/* EPLLCON compatible enough to get on/off information */
+
+void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll,
+						   fdiv_fn get_fdiv)
+{
+	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
+	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long pll;
+	unsigned long fclk;
+	unsigned long hclk;
+	unsigned long pclk;
+	int ptr;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	pll = get_mpll(mpllcon, xtal);
+	clk_msysclk.clk.rate = pll;
+
+	fclk = pll / get_fdiv(clkdiv0);
+	hclk = s3c2443_prediv_getrate(&clk_prediv);
+	hclk /= s3c2443_get_hdiv(clkdiv0);
+	pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
+
+	s3c24xx_setup_clocks(fclk, hclk, pclk);
+
+	printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
+	       (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+	       print_mhz(pll), print_mhz(fclk),
+	       print_mhz(hclk), print_mhz(pclk));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
+		s3c_set_clksrc(&clksrc_clks[ptr], true);
+
+	/* ensure usb bus clock is within correct rate of 48MHz */
+
+	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
+		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
+		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
+	}
+
+	printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
+	       (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+	       print_mhz(clk_get_rate(&clk_epll)),
+	       print_mhz(clk_get_rate(&clk_usb_bus)));
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_prediv,
+	&clk_mpllref,
+	&clk_mdivclk,
+	&clk_ext,
+	&clk_epll,
+	&clk_usb_bus,
+};
+
+static struct clksrc_clk *clksrcs[] __initdata = {
+	&clk_usb_bus_host,
+	&clk_epllref,
+	&clk_esysclk,
+	&clk_msysclk,
+};
+
+void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
+				       fdiv_fn get_fdiv)
+{
+	int ptr;
+
+	/* s3c2443 parents h and p clocks from prediv */
+	clk_h.parent = &clk_prediv;
+	clk_p.parent = &clk_prediv;
+
+	clk_usb_bus.parent = &clk_usb_bus_host.clk;
+	clk_epll.parent = &clk_epllref.clk;
+
+	s3c24xx_register_baseclocks(xtal);
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+		s3c_register_clksrc(clksrcs[ptr], 1);
+
+	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	/* See s3c2443/etc notes on disabling clocks at init time */
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+	s3c2443_common_setup_clocks(get_mpll, get_fdiv);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/setup-i2c.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/setup-i2c.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/setup-i2c.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/setup-i2c.c	2010-08-01 18:11:14.000000000 -0400
@@ -15,12 +15,13 @@
 
 struct platform_device;
 
+#include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
-	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
+	s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+	s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/setup-ts.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/setup-ts.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/setup-ts.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/setup-ts.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,34 @@
+/* linux/arch/arm/plat-s3c24xx/setup-ts.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *                     http://www.samsung.com/
+ *
+ * Based on S3C24XX setup for i2c device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+/**
+ * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
+ *
+ * Configure the GPIO for the S3C2410 system, where we have external FETs
+ * connected to the device (later systems such as the S3C2440 integrate
+ * these into the device).
+ */
+void s3c24xx_ts_cfg_gpio(struct platform_device *dev)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c	2010-08-01 18:11:14.000000000 -0400
@@ -21,16 +21,16 @@
 					  int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
+		s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
+		s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
+		s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
 		s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
 		s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
-		s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
-		s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
+		s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
 	}
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c	2010-08-01 18:11:14.000000000 -0400
@@ -23,16 +23,16 @@
 
 	printk(KERN_INFO "%s(%d)\n", __func__, enable);
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
-		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
-		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+		s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+		s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+		s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
 		s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
 		s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
-		s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
-		s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+		s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
 	}
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c	2010-08-01 18:11:14.000000000 -0400
@@ -21,16 +21,16 @@
 				       int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
+		s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
+		s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
+		s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
 		s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
 		s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
-		s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
-		s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
+		s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+		s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
 	}
 }
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5p/clock.c linux-libre-2.6.35-gnu/arch/arm/plat-s5p/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5p/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5p/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -33,7 +33,12 @@
 	.id		= -1,
 };
 
-static struct clk s5p_clk_27m = {
+struct clk clk_xusbxti = {
+	.name		= "xusbxti",
+	.id		= -1,
+};
+
+struct clk s5p_clk_27m = {
 	.name		= "clk_27m",
 	.id		= -1,
 	.rate		= 27000000,
@@ -69,6 +74,13 @@
 	.ctrlbit	= (1 << 31),
 };
 
+/* VPLL clock output */
+struct clk clk_fout_vpll = {
+	.name		= "fout_vpll",
+	.id		= -1,
+	.ctrlbit	= (1 << 31),
+};
+
 /* ARM clock */
 struct clk clk_arm = {
 	.name		= "armclk",
@@ -133,8 +145,10 @@
 	&clk_fout_apll,
 	&clk_fout_mpll,
 	&clk_fout_epll,
+	&clk_fout_vpll,
 	&clk_arm,
 	&clk_vpll,
+	&clk_xusbxti,
 };
 
 void __init s5p_register_clocks(unsigned long xtal_freq)
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5p/cpu.c linux-libre-2.6.35-gnu/arch/arm/plat-s5p/cpu.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5p/cpu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5p/cpu.c	2010-08-01 18:11:14.000000000 -0400
@@ -19,12 +19,14 @@
 #include <plat/cpu.h>
 #include <plat/s5p6440.h>
 #include <plat/s5p6442.h>
+#include <plat/s5pc100.h>
 #include <plat/s5pv210.h>
 
 /* table of supported CPUs */
 
 static const char name_s5p6440[] = "S5P6440";
 static const char name_s5p6442[] = "S5P6442";
+static const char name_s5pc100[] = "S5PC100";
 static const char name_s5pv210[] = "S5PV210/S5PC110";
 
 static struct cpu_table cpu_ids[] __initdata = {
@@ -45,6 +47,14 @@
 		.init		= s5p6442_init,
 		.name		= name_s5p6442,
 	}, {
+		.idcode		= 0x43100000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pc100_map_io,
+		.init_clocks	= s5pc100_init_clocks,
+		.init_uarts	= s5pc100_init_uarts,
+		.init		= s5pc100_init,
+		.name		= name_s5pc100,
+	}, {
 		.idcode		= 0x43110000,
 		.idmask		= 0xfffff000,
 		.map_io		= s5pv210_map_io,
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5p/include/plat/irqs.h linux-libre-2.6.35-gnu/arch/arm/plat-s5p/include/plat/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5p/include/plat/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5p/include/plat/irqs.h	2010-08-01 18:11:14.000000000 -0400
@@ -79,7 +79,7 @@
 #define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
 #define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
 
-#define S5P_TIMER_IRQ(x)	S5P_IRQ(11 + (x))
+#define S5P_TIMER_IRQ(x)	(11 + (x))
 
 #define IRQ_TIMER0		S5P_TIMER_IRQ(0)
 #define IRQ_TIMER1		S5P_TIMER_IRQ(1)
@@ -87,4 +87,11 @@
 #define IRQ_TIMER3		S5P_TIMER_IRQ(3)
 #define IRQ_TIMER4		S5P_TIMER_IRQ(4)
 
+#define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
+					: ((x) - 16 + S5P_EINT_BASE2))
+
+#define EINT_OFFSET(irq)	((irq) < S5P_EINT_BASE2 ? \
+						((irq) - S5P_EINT_BASE1) : \
+						((irq) + 16 - S5P_EINT_BASE2))
+
 #endif /* __ASM_PLAT_S5P_IRQS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5p/include/plat/pll.h linux-libre-2.6.35-gnu/arch/arm/plat-s5p/include/plat/pll.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5p/include/plat/pll.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5p/include/plat/pll.h	2010-08-01 18:11:14.000000000 -0400
@@ -81,3 +81,25 @@
 
 	return result;
 }
+
+#define PLL65XX_MDIV_MASK	(0x3FF)
+#define PLL65XX_PDIV_MASK	(0x3F)
+#define PLL65XX_SDIV_MASK	(0x7)
+#define PLL65XX_MDIV_SHIFT	(16)
+#define PLL65XX_PDIV_SHIFT	(8)
+#define PLL65XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5p/include/plat/s5pc100.h linux-libre-2.6.35-gnu/arch/arm/plat-s5p/include/plat/s5pc100.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5p/include/plat/s5pc100.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5p/include/plat/s5pc100.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,33 @@
+/* arch/arm/plat-s5p/include/plat/s5pc100.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PC100
+
+extern  int s5pc100_init(void);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+#else
+#define s5pc100_init_clocks NULL
+#define s5pc100_init_uarts NULL
+#define s5pc100_map_io NULL
+#define s5pc100_init NULL
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5p/include/plat/s5p-clock.h linux-libre-2.6.35-gnu/arch/arm/plat-s5p/include/plat/s5p-clock.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5p/include/plat/s5p-clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5p/include/plat/s5p-clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -21,12 +21,16 @@
 #define clk_fin_mpll clk_ext_xtal_mux
 #define clk_fin_epll clk_ext_xtal_mux
 #define clk_fin_vpll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
 
 extern struct clk clk_ext_xtal_mux;
+extern struct clk clk_xusbxti;
 extern struct clk clk_48m;
+extern struct clk s5p_clk_27m;
 extern struct clk clk_fout_apll;
 extern struct clk clk_fout_mpll;
 extern struct clk clk_fout_epll;
+extern struct clk clk_fout_vpll;
 extern struct clk clk_arm;
 extern struct clk clk_vpll;
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5p/irq-eint.c linux-libre-2.6.35-gnu/arch/arm/plat-s5p/irq-eint.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5p/irq-eint.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5p/irq-eint.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,218 @@
+/* linux/arch/arm/plat-s5p/irq-eint.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5P - IRQ EINT support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <plat/regs-irqtype.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+#include <plat/gpio-cfg.h>
+#include <mach/regs-gpio.h>
+
+static inline void s5p_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask |= eint_irq_to_bit(irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(irq)));
+	mask &= ~(eint_irq_to_bit(irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(irq)));
+}
+
+static inline void s5p_irq_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s5p_irq_eint_mask(irq);
+	s5p_irq_eint_ack(irq);
+}
+
+static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	int offs = EINT_OFFSET(irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S5P_EXTINT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S5P_EXTINT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S5P_EXTINT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S5P_EXTINT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S5P_EXTINT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs & 0x7) * 4;
+	mask = 0x7 << shift;
+
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(irq)));
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(irq)));
+
+	if ((0 <= offs) && (offs < 8))
+		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+
+	else if ((8 <= offs) && (offs < 16))
+		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+
+	else if ((16 <= offs) && (offs < 24))
+		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+
+	else if ((24 <= offs) && (offs < 32))
+		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+
+	else
+		printk(KERN_ERR "No such irq number %d", offs);
+
+	return 0;
+}
+
+static struct irq_chip s5p_irq_eint = {
+	.name		= "s5p-eint",
+	.mask		= s5p_irq_eint_mask,
+	.unmask		= s5p_irq_eint_unmask,
+	.mask_ack	= s5p_irq_eint_maskack,
+	.ack		= s5p_irq_eint_ack,
+	.set_type	= s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.set_wake	= s3c_irqext_wake,
+#endif
+};
+
+/* s5p_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from EINTs 16 to 31. It is designed to be inlined into the specific
+ * handler s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void s5p_irq_demux_eint(unsigned int start)
+{
+	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+	unsigned int irq;
+
+	status &= ~mask;
+	status &= 0xff;
+
+	while (status) {
+		irq = fls(status) - 1;
+		generic_handle_irq(irq + start);
+		status &= ~(1 << irq);
+	}
+}
+
+static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	s5p_irq_demux_eint(IRQ_EINT(16));
+	s5p_irq_demux_eint(IRQ_EINT(24));
+}
+
+static inline void s5p_irq_vic_eint_mask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+
+	s5p_irq_eint_mask(irq);
+	writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void s5p_irq_vic_eint_unmask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+
+	s5p_irq_eint_unmask(irq);
+	writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE);
+}
+
+static inline void s5p_irq_vic_eint_ack(unsigned int irq)
+{
+	__raw_writel(eint_irq_to_bit(irq), S5P_EINT_PEND(EINT_REG_NR(irq)));
+}
+
+static void s5p_irq_vic_eint_maskack(unsigned int irq)
+{
+	s5p_irq_vic_eint_mask(irq);
+	s5p_irq_vic_eint_ack(irq);
+}
+
+static struct irq_chip s5p_irq_vic_eint = {
+	.name		= "s5p_vic_eint",
+	.mask		= s5p_irq_vic_eint_mask,
+	.unmask		= s5p_irq_vic_eint_unmask,
+	.mask_ack	= s5p_irq_vic_eint_maskack,
+	.ack		= s5p_irq_vic_eint_ack,
+	.set_type	= s5p_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.set_wake	= s3c_irqext_wake,
+#endif
+};
+
+int __init s5p_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(15); irq++)
+		set_irq_chip(irq, &s5p_irq_vic_eint);
+
+	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+		set_irq_chip(irq, &s5p_irq_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT16_31, s5p_irq_demux_eint16_31);
+	return 0;
+}
+
+arch_initcall(s5p_init_irq_eint);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5p/Kconfig linux-libre-2.6.35-gnu/arch/arm/plat-s5p/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5p/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5p/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -7,12 +7,13 @@
 
 config PLAT_S5P
 	bool
-	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210)
+	depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210)
 	default y
 	select ARM_VIC
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_GPIO_TRACK
+	select S5P_GPIO_DRVSTR
 	select SAMSUNG_GPIOLIB_4BIT
 	select S3C_GPIO_CFG_S3C64XX
 	select S3C_GPIO_PULL_UPDOWN
@@ -23,3 +24,9 @@
 	select SAMSUNG_IRQ_UART
 	help
 	  Base platform code for Samsung's S5P series SoC.
+
+config S5P_EXT_INT
+	bool
+	help
+	  Use the external interrupts (other than GPIO interrupts.)
+	  Note: Do not choose this for S5P6440.
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5p/Makefile linux-libre-2.6.35-gnu/arch/arm/plat-s5p/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5p/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5p/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -16,4 +16,5 @@
 obj-y				+= cpu.o
 obj-y				+= clock.o
 obj-y				+= irq.o
-obj-y				+= setup-i2c0.o
+obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
+
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5p/setup-i2c0.c linux-libre-2.6.35-gnu/arch/arm/plat-s5p/setup-i2c0.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5p/setup-i2c0.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5p/setup-i2c0.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,25 +0,0 @@
-/* linux/arch/arm/plat-s5p/setup-i2c0.c
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <plat/iic.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	/* Will be populated later */
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/clock.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/clock.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,709 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/clock.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * S5PC1XX Base clock support
- *
- * Based on plat-s3c64xx/clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-clock.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S5PC100_CLKSRC1);
-	if (enable)
-		val |= S5PC100_CLKSRC1_CLK48M_MASK;
-	else
-		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
-
-	__raw_writel(val, S5PC100_CLKSRC1);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.id		= -1,
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-struct clk clk_54m = {
-	.name		= "clk_54m",
-	.id		= -1,
-	.rate		= 54000000,
-};
-
-struct clk clk_hd0 = {
-	.name		= "hclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.ops		= &clk_ops_def_setrate,
-};
-
-struct clk clk_pd0 = {
-	.name		= "pclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.ops		= &clk_ops_def_setrate,
-};
-
-static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-	__raw_writel(con, reg);
-
-	return 0;
-}
-
-static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
-
-int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
-}
-
-int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
-}
-
-static struct clk s5pc100_init_clocks_disable[] = {
-	{
-		.name		= "dsi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
-	}, {
-		.name		= "csi",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
-	}, {
-		.name		= "ccan",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
-	}, {
-		.name		= "ccan",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
-	}, {
-		.name		= "keypad",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
-	}, {
-		.name		= "hclkd2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc100_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
-	}, {
-		.name		= "iis-d2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc100_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
-	},
-};
-
-static struct clk s5pc100_init_clocks[] = {
-	/* System1 (D0_0) devices */
-	{
-		.name		= "intc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
-	}, {
-		.name		= "tzic",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
-	}, {
-		.name		= "cf-ata",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
-	}, {
-		.name		= "mdma",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
-	}, {
-		.name		= "g2d",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
-	}, {
-		.name		= "secss",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
-	}, {
-		.name		= "cssys",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
-	},
-
-	/* Memory (D0_1) devices */
-	{
-		.name		= "dmc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
-	}, {
-		.name		= "sromc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
-	}, {
-		.name		= "onenand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
-	}, {
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
-	}, {
-		.name		= "intmem",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
-	}, {
-		.name		= "ebi",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
-	},
-
-	/* System2 (D0_2) devices */
-	{
-		.name		= "seckey",
-		.id		= -1,
-		.parent		= &clk_pd0,
-		.enable		= s5pc100_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
-	}, {
-		.name		= "sdm",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc100_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
-	},
-
-	/* File (D1_0) devices */
-	{
-		.name		= "pdma",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
-	}, {
-		.name		= "pdma",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
-	}, {
-		.name		= "otg",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
-	}, {
-		.name		= "modem",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
-	},
-
-	/* Multimedia1 (D1_1) devices */
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
-	}, {
-		.name		= "rotator",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
-	}, {
-		.name		= "fimc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
-	}, {
-		.name		= "fimc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
-	}, {
-		.name		= "fimc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
-	}, {
-		.name		= "jpeg",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
-	}, {
-		.name		= "g3d",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
-	},
-
-	/* Multimedia2 (D1_2) devices */
-	{
-		.name		= "tv",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
-	}, {
-		.name		= "vp",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
-	}, {
-		.name		= "mixer",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
-	}, {
-		.name		= "hdmi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
-	}, {
-		.name		= "mfc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
-	},
-
-	/* System (D1_3) devices */
-	{
-		.name		= "chipid",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
-	}, {
-		.name		= "apc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
-	}, {
-		.name		= "iec",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
-	}, {
-		.name		= "systimer",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
-	},
-
-	/* Connectivity (D1_4) devices */
-	{
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
-	}, {
-		.name		= "hdmi-i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
-	}, {
-		.name		= "spi",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
-	}, {
-		.name		= "irda",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
-	}, {
-		.name		= "hsitx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
-	}, {
-		.name		= "hsirx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
-	},
-
-	/* Audio (D1_5) devices */
-	{
-		.name		= "iis",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
-	}, {
-		.name		= "iis",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
-	}, {
-		.name		= "iis",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
-	}, {
-		.name		= "pcm",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
-	}, {
-		.name		= "pcm",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
-	}, {
-		.name		= "spdif",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
-	}, {
-		.name		= "cg",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc100_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
-	},
-
-	/* Audio (D2_0) devices: all disabled */
-
-	/* Special Clocks 0 */
-	{
-		.name		= "sclk_hpm",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_HPM,
-	}, {
-		.name		= "sclk_onenand",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
-	}, {
-		.name		= "spi_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
-	}, {
-		.name		= "spi_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
-	}, {
-		.name		= "spi_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
-	}, {
-		.name		= "mmc_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
-	}, {
-		.name		= "mmc_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
-	}, {
-		.name		= "mmc_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc100_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
-	},
-	/* Special Clocks 1 */
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_epll,
-	&clk_pd0,
-	&clk_hd0,
-	&clk_27m,
-	&clk_48m,
-	&clk_54m,
-};
-
-void __init s5pc1xx_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-	int size;
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	s3c_register_clocks(s5pc100_init_clocks,
-			    ARRAY_SIZE(s5pc100_init_clocks));
-
-	clkp = s5pc100_init_clocks_disable;
-	size = ARRAY_SIZE(s5pc100_init_clocks_disable);
-
-	for (ptr = 0; ptr < size; ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
-
-	s3c_pwmclk_init();
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/cpu.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/cpu.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/cpu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/cpu.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,122 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/cpu.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX CPU Support
- *
- * Based on plat-s3c64xx/cpu.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <asm/mach/map.h>
-
-#include <plat/regs-serial.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-#include <plat/s5pc100.h>
-
-/* table of supported CPUs */
-
-static const char name_s5pc100[] = "S5PC100";
-
-static struct cpu_table cpu_ids[] __initdata = {
-	{
-		.idcode		= 0x43100000,
-		.idmask		= 0xfffff000,
-		.map_io		= s5pc100_map_io,
-		.init_clocks	= s5pc100_init_clocks,
-		.init_uarts	= s5pc100_init_uarts,
-		.init		= s5pc100_init,
-		.name		= name_s5pc100,
-	},
-};
-/* minimal IO mapping */
-
-/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
-#define UART_OFFS (S3C_PA_UART & 0xffff)
-
-static struct map_desc s5pc1xx_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5PC1XX_VA_CLK_OTHER,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_GPIO,
-		.pfn		= __phys_to_pfn(S5PC100_PA_GPIO),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_CHIPID,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_CHIPID),
-		.length		= SZ_16,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_CLK,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_PWR,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_PWR),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)(S5PC1XX_VA_UART),
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_UART),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_VIC(0),
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(0)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_VIC(1),
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(1)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_VIC(2),
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(2)),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5PC1XX_VA_TIMER,
-		.pfn		= __phys_to_pfn(S5PC1XX_PA_TIMER),
-		.length		= SZ_256,
-		.type		= MT_DEVICE,
-	},
-};
-
-/* read cpu identification code */
-
-void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
-{
-	unsigned long idcode;
-
-	/* initialise the io descriptors we need for initialisation */
-	iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
-	iotable_init(mach_desc, size);
-
-	idcode = __raw_readl(S5PC1XX_VA_CHIPID);
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/dev-uart.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/dev-uart.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/dev-uart.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/dev-uart.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,145 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Based on plat-s3c64xx/dev-uart.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-/* Serial port registrations */
-
-/* 64xx uarts are closer together */
-
-static struct resource s5pc1xx_uart0_resource[] = {
-	[0] = {
-		.start	= S3C_PA_UART0,
-		.end	= S3C_PA_UART0 + 0x100,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX0,
-		.end	= IRQ_S3CUART_RX0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX0,
-		.end	= IRQ_S3CUART_TX0,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR0,
-		.end	= IRQ_S3CUART_ERR0,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct resource s5pc1xx_uart1_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART1,
-		.end   = S3C_PA_UART1 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX1,
-		.end	= IRQ_S3CUART_RX1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX1,
-		.end	= IRQ_S3CUART_TX1,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR1,
-		.end	= IRQ_S3CUART_ERR1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s5pc1xx_uart2_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART2,
-		.end   = S3C_PA_UART2 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX2,
-		.end	= IRQ_S3CUART_RX2,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX2,
-		.end	= IRQ_S3CUART_TX2,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR2,
-		.end	= IRQ_S3CUART_ERR2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource s5pc1xx_uart3_resource[] = {
-	[0] = {
-		.start = S3C_PA_UART3,
-		.end   = S3C_PA_UART3 + 0x100,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_S3CUART_RX3,
-		.end	= IRQ_S3CUART_RX3,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= IRQ_S3CUART_TX3,
-		.end	= IRQ_S3CUART_TX3,
-		.flags	= IORESOURCE_IRQ,
-
-	},
-	[3] = {
-		.start	= IRQ_S3CUART_ERR3,
-		.end	= IRQ_S3CUART_ERR3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-
-struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
-	[0] = {
-		.resources	= s5pc1xx_uart0_resource,
-		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart0_resource),
-	},
-	[1] = {
-		.resources	= s5pc1xx_uart1_resource,
-		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart1_resource),
-	},
-	[2] = {
-		.resources	= s5pc1xx_uart2_resource,
-		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart2_resource),
-	},
-	[3] = {
-		.resources	= s5pc1xx_uart3_resource,
-		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart3_resource),
-	},
-};
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/gpio-config.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/gpio-config.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/gpio-config.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/gpio-config.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,62 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * S5PC1XX GPIO Configuration.
- *
- * Based on plat-s3c64xx/gpio-config.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
-
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	void __iomem *reg;
-	int shift = off * 2;
-	u32 drvstr;
-
-	if (!chip)
-		return -EINVAL;
-
-	reg = chip->base + 0x0C;
-
-	drvstr = __raw_readl(reg);
-	drvstr = 0xffff & (0x3 << shift);
-	drvstr = drvstr >> shift;
-
-	return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
-			s5p_gpio_drvstr_t drvstr)
-{
-	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
-	void __iomem *reg;
-	int shift = off * 2;
-	u32 tmp;
-
-	if (!chip)
-		return -EINVAL;
-
-	reg = chip->base + 0x0C;
-
-	tmp = __raw_readl(reg);
-	tmp |= drvstr << shift;
-
-	__raw_writel(tmp, reg);
-
-	return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/gpiolib.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/gpiolib.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/gpiolib.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/gpiolib.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,503 +0,0 @@
-/*
- * arch/arm/plat-s5pc1xx/gpiolib.c
- *
- *  Copyright 2009 Samsung Electronics Co
- *  Kyungmin Park <kyungmin.park@samsung.com>
- *
- * S5PC1XX - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-#include <plat/regs-gpio.h>
-
-/* S5PC100 GPIO bank summary:
- *
- * Bank	GPIOs	Style	INT Type
- * A0	8	4Bit	GPIO_INT0
- * A1	5	4Bit	GPIO_INT1
- * B	8	4Bit	GPIO_INT2
- * C	5	4Bit	GPIO_INT3
- * D	7	4Bit	GPIO_INT4
- * E0	8	4Bit	GPIO_INT5
- * E1	6	4Bit	GPIO_INT6
- * F0	8	4Bit	GPIO_INT7
- * F1	8	4Bit	GPIO_INT8
- * F2	8	4Bit	GPIO_INT9
- * F3	4	4Bit	GPIO_INT10
- * G0	8	4Bit	GPIO_INT11
- * G1	3	4Bit	GPIO_INT12
- * G2	7	4Bit	GPIO_INT13
- * G3	7	4Bit	GPIO_INT14
- * H0	8	4Bit	WKUP_INT
- * H1	8	4Bit	WKUP_INT
- * H2	8	4Bit	WKUP_INT
- * H3	8	4Bit	WKUP_INT
- * I	8	4Bit	GPIO_INT15
- * J0	8	4Bit	GPIO_INT16
- * J1	5	4Bit	GPIO_INT17
- * J2	8	4Bit	GPIO_INT18
- * J3	8	4Bit	GPIO_INT19
- * J4	4	4Bit	GPIO_INT20
- * K0	8	4Bit	None
- * K1	6	4Bit	None
- * K2	8	4Bit	None
- * K3	8	4Bit	None
- * L0	8	4Bit	None
- * L1	8	4Bit	None
- * L2	8	4Bit	None
- * L3	8	4Bit	None
- */
-
-#define OFF_GPCON	(0x00)
-#define OFF_GPDAT	(0x04)
-
-#define con_4bit_shift(__off) ((__off) * 4)
-
-#if 1
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The s5pc1xx_gpiolib routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- *	        gpio n: 4 bits starting at (4*n)
- *		0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- *		bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
- */
-
-static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	__raw_writel(con, base + OFF_GPCON);
-
-	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
-	return 0;
-}
-
-static int s5pc1xx_gpiolib_output(struct gpio_chip *chip,
-				       unsigned offset, int value)
-{
-	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-	void __iomem *base = ourchip->base;
-	unsigned long con;
-	unsigned long dat;
-
-	con = __raw_readl(base + OFF_GPCON);
-	con &= ~(0xf << con_4bit_shift(offset));
-	con |= 0x1 << con_4bit_shift(offset);
-
-	dat = __raw_readl(base + OFF_GPDAT);
-	if (value)
-		dat |= 1 << offset;
-	else
-		dat &= ~(1 << offset);
-
-	__raw_writel(dat, base + OFF_GPDAT);
-	__raw_writel(con, base + OFF_GPCON);
-	__raw_writel(dat, base + OFF_GPDAT);
-
-	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
-	return 0;
-}
-
-static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
-	return S3C_IRQ_GPIO(chip->base + offset);
-}
-
-static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
-{
-	int base;
-
-	base = chip->base - S5PC100_GPH0(0);
-	if (base == 0)
-		return IRQ_EINT(offset);
-	base = chip->base - S5PC100_GPH1(0);
-	if (base == 0)
-		return IRQ_EINT(8 + offset);
-	base = chip->base - S5PC100_GPH2(0);
-	if (base == 0)
-		return IRQ_EINT(16 + offset);
-	base = chip->base - S5PC100_GPH3(0);
-	if (base == 0)
-		return IRQ_EINT(24 + offset);
-	return -EINVAL;
-}
-
-static struct s3c_gpio_cfg gpio_cfg = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_eint = {
-	.cfg_eint	= 0xf,
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
-	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
-	.set_pull	= s3c_gpio_setpull_updown,
-	.get_pull	= s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
-	{
-		.base	= S5PC100_GPA0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPA0(0),
-			.ngpio	= S5PC100_GPIO_A0_NR,
-			.label	= "GPA0",
-		},
-	}, {
-		.base	= S5PC100_GPA1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPA1(0),
-			.ngpio	= S5PC100_GPIO_A1_NR,
-			.label	= "GPA1",
-		},
-	}, {
-		.base	= S5PC100_GPB_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPB(0),
-			.ngpio	= S5PC100_GPIO_B_NR,
-			.label	= "GPB",
-		},
-	}, {
-		.base	= S5PC100_GPC_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPC(0),
-			.ngpio	= S5PC100_GPIO_C_NR,
-			.label	= "GPC",
-		},
-	}, {
-		.base	= S5PC100_GPD_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPD(0),
-			.ngpio	= S5PC100_GPIO_D_NR,
-			.label	= "GPD",
-		},
-	}, {
-		.base	= S5PC100_GPE0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPE0(0),
-			.ngpio	= S5PC100_GPIO_E0_NR,
-			.label	= "GPE0",
-		},
-	}, {
-		.base	= S5PC100_GPE1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPE1(0),
-			.ngpio	= S5PC100_GPIO_E1_NR,
-			.label	= "GPE1",
-		},
-	}, {
-		.base	= S5PC100_GPF0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPF0(0),
-			.ngpio	= S5PC100_GPIO_F0_NR,
-			.label	= "GPF0",
-		},
-	}, {
-		.base	= S5PC100_GPF1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPF1(0),
-			.ngpio	= S5PC100_GPIO_F1_NR,
-			.label	= "GPF1",
-		},
-	}, {
-		.base	= S5PC100_GPF2_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPF2(0),
-			.ngpio	= S5PC100_GPIO_F2_NR,
-			.label	= "GPF2",
-		},
-	}, {
-		.base	= S5PC100_GPF3_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPF3(0),
-			.ngpio	= S5PC100_GPIO_F3_NR,
-			.label	= "GPF3",
-		},
-	}, {
-		.base	= S5PC100_GPG0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPG0(0),
-			.ngpio	= S5PC100_GPIO_G0_NR,
-			.label	= "GPG0",
-		},
-	}, {
-		.base	= S5PC100_GPG1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPG1(0),
-			.ngpio	= S5PC100_GPIO_G1_NR,
-			.label	= "GPG1",
-		},
-	}, {
-		.base	= S5PC100_GPG2_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPG2(0),
-			.ngpio	= S5PC100_GPIO_G2_NR,
-			.label	= "GPG2",
-		},
-	}, {
-		.base	= S5PC100_GPG3_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPG3(0),
-			.ngpio	= S5PC100_GPIO_G3_NR,
-			.label	= "GPG3",
-		},
-	}, {
-		.base	= S5PC100_GPH0_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH0(0),
-			.ngpio	= S5PC100_GPIO_H0_NR,
-			.label	= "GPH0",
-		},
-	}, {
-		.base	= S5PC100_GPH1_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH1(0),
-			.ngpio	= S5PC100_GPIO_H1_NR,
-			.label	= "GPH1",
-		},
-	}, {
-		.base	= S5PC100_GPH2_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH2(0),
-			.ngpio	= S5PC100_GPIO_H2_NR,
-			.label	= "GPH2",
-		},
-	}, {
-		.base	= S5PC100_GPH3_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH3(0),
-			.ngpio	= S5PC100_GPIO_H3_NR,
-			.label	= "GPH3",
-		},
-	}, {
-		.base	= S5PC100_GPI_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPI(0),
-			.ngpio	= S5PC100_GPIO_I_NR,
-			.label	= "GPI",
-		},
-	}, {
-		.base	= S5PC100_GPJ0_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ0(0),
-			.ngpio	= S5PC100_GPIO_J0_NR,
-			.label	= "GPJ0",
-		},
-	}, {
-		.base	= S5PC100_GPJ1_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ1(0),
-			.ngpio	= S5PC100_GPIO_J1_NR,
-			.label	= "GPJ1",
-		},
-	}, {
-		.base	= S5PC100_GPJ2_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ2(0),
-			.ngpio	= S5PC100_GPIO_J2_NR,
-			.label	= "GPJ2",
-		},
-	}, {
-		.base	= S5PC100_GPJ3_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ3(0),
-			.ngpio	= S5PC100_GPIO_J3_NR,
-			.label	= "GPJ3",
-		},
-	}, {
-		.base	= S5PC100_GPJ4_BASE,
-		.config	= &gpio_cfg,
-		.chip	= {
-			.base	= S5PC100_GPJ4(0),
-			.ngpio	= S5PC100_GPIO_J4_NR,
-			.label	= "GPJ4",
-		},
-	}, {
-		.base	= S5PC100_GPK0_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK0(0),
-			.ngpio	= S5PC100_GPIO_K0_NR,
-			.label	= "GPK0",
-		},
-	}, {
-		.base	= S5PC100_GPK1_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK1(0),
-			.ngpio	= S5PC100_GPIO_K1_NR,
-			.label	= "GPK1",
-		},
-	}, {
-		.base	= S5PC100_GPK2_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK2(0),
-			.ngpio	= S5PC100_GPIO_K2_NR,
-			.label	= "GPK2",
-		},
-	}, {
-		.base	= S5PC100_GPK3_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPK3(0),
-			.ngpio	= S5PC100_GPIO_K3_NR,
-			.label	= "GPK3",
-		},
-	}, {
-		.base	= S5PC100_GPL0_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL0(0),
-			.ngpio	= S5PC100_GPIO_L0_NR,
-			.label	= "GPL0",
-		},
-	}, {
-		.base	= S5PC100_GPL1_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL1(0),
-			.ngpio	= S5PC100_GPIO_L1_NR,
-			.label	= "GPL1",
-		},
-	}, {
-		.base	= S5PC100_GPL2_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL2(0),
-			.ngpio	= S5PC100_GPIO_L2_NR,
-			.label	= "GPL2",
-		},
-	}, {
-		.base	= S5PC100_GPL3_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL3(0),
-			.ngpio	= S5PC100_GPIO_L3_NR,
-			.label	= "GPL3",
-		},
-	}, {
-		.base	= S5PC100_GPL4_BASE,
-		.config	= &gpio_cfg_noint,
-		.chip	= {
-			.base	= S5PC100_GPL4(0),
-			.ngpio	= S5PC100_GPIO_L4_NR,
-			.label	= "GPL4",
-		},
-	},
-};
-
-/* FIXME move from irq-gpio.c */
-extern struct irq_chip s5pc1xx_gpioint;
-extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
-
-static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip)
-{
-	chip->chip.direction_input = s5pc1xx_gpiolib_input;
-	chip->chip.direction_output = s5pc1xx_gpiolib_output;
-	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-
-	/* Interrupt */
-	if (chip->config == &gpio_cfg) {
-		int i, irq;
-
-		chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
-
-		for (i = 0;  i < chip->chip.ngpio; i++) {
-			irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
-			set_irq_chip(irq, &s5pc1xx_gpioint);
-			set_irq_data(irq, &chip->chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
-		}
-	} else if (chip->config == &gpio_cfg_eint)
-		chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
-}
-
-static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips,
-				       int nr_chips,
-				       void (*fn)(struct s3c_gpio_chip *))
-{
-	for (; nr_chips > 0; nr_chips--, chips++) {
-		if (fn)
-			(fn)(chips);
-		s3c_gpiolib_add(chips);
-	}
-}
-
-static __init int s5pc1xx_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chips;
-	int nr_chips;
-
-		chips = s5pc100_gpio_chips;
-		nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
-
-	s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link);
-	/* Interrupt */
-	set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
-
-	return 0;
-}
-core_initcall(s5pc1xx_gpiolib_init);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,32 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
- *
- * Copyright 2009 Samsung Electronic
- *
- * S5PC1XX Platform - GPIO pin configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-#ifndef __GPIO_CFG_S5PC1XX_H
-#define __GPIO_CFG_S5PC1XX_H __FILE__
-
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
-
-#define S5P_GPIO_DRVSTR_LV1	0x00
-#define S5P_GPIO_DRVSTR_LV2	0x01
-#define S5P_GPIO_DRVSTR_LV3	0x10
-#define S5P_GPIO_DRVSTR_LV4	0x11
-
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
-
-extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
-			s5p_gpio_drvstr_t drvstr);
-
-#endif /* __GPIO_CFG_S5PC1XX_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,44 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *
- * External Interrupt (GPH0 ~ GPH3) control register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5PC1XX_WKUP_INT_CON0_7		(S5PC1XX_EINT_BASE + 0x0)
-#define S5PC1XX_WKUP_INT_CON8_15	(S5PC1XX_EINT_BASE + 0x4)
-#define S5PC1XX_WKUP_INT_CON16_23	(S5PC1XX_EINT_BASE + 0x8)
-#define S5PC1XX_WKUP_INT_CON24_31	(S5PC1XX_EINT_BASE + 0xC)
-#define S5PC1XX_WKUP_INT_CON(x)		(S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_FLTCON0_3	(S5PC1XX_EINT_BASE + 0x80)
-#define S5PC1XX_WKUP_INT_FLTCON4_7	(S5PC1XX_EINT_BASE + 0x84)
-#define S5PC1XX_WKUP_INT_FLTCON8_11	(S5PC1XX_EINT_BASE + 0x88)
-#define S5PC1XX_WKUP_INT_FLTCON12_15	(S5PC1XX_EINT_BASE + 0x8C)
-#define S5PC1XX_WKUP_INT_FLTCON16_19	(S5PC1XX_EINT_BASE + 0x90)
-#define S5PC1XX_WKUP_INT_FLTCON20_23	(S5PC1XX_EINT_BASE + 0x94)
-#define S5PC1XX_WKUP_INT_FLTCON24_27	(S5PC1XX_EINT_BASE + 0x98)
-#define S5PC1XX_WKUP_INT_FLTCON28_31	(S5PC1XX_EINT_BASE + 0x9C)
-#define S5PC1XX_WKUP_INT_FLTCON(x)	(S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_MASK0_7	(S5PC1XX_EINT_BASE + 0x100)
-#define S5PC1XX_WKUP_INT_MASK8_15	(S5PC1XX_EINT_BASE + 0x104)
-#define S5PC1XX_WKUP_INT_MASK16_23	(S5PC1XX_EINT_BASE + 0x108)
-#define S5PC1XX_WKUP_INT_MASK24_31	(S5PC1XX_EINT_BASE + 0x10C)
-#define S5PC1XX_WKUP_INT_MASK(x)	(S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_PEND0_7	(S5PC1XX_EINT_BASE + 0x140)
-#define S5PC1XX_WKUP_INT_PEND8_15	(S5PC1XX_EINT_BASE + 0x144)
-#define S5PC1XX_WKUP_INT_PEND16_23	(S5PC1XX_EINT_BASE + 0x148)
-#define S5PC1XX_WKUP_INT_PEND24_31	(S5PC1XX_EINT_BASE + 0x14C)
-#define S5PC1XX_WKUP_INT_PEND(x)	(S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
-
-#define S5PC1XX_WKUP_INT_LOWLEV		(0x00)
-#define S5PC1XX_WKUP_INT_HILEV		(0x01)
-#define S5PC1XX_WKUP_INT_FALLEDGE	(0x02)
-#define S5PC1XX_WKUP_INT_RISEEDGE	(0x03)
-#define S5PC1XX_WKUP_INT_BOTHEDGE	(0x04)
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/irqs.h linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/irqs.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/irqs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/irqs.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,198 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Common IRQ support
- *
- * Based on plat-s3c64xx/include/plat/irqs.h
- */
-
-#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
-#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S3C_IRQ_OFFSET		(32)
-
-#define S3C_IRQ(x)		((x) + S3C_IRQ_OFFSET)
-
-#define S3C_VIC0_BASE		S3C_IRQ(0)
-#define S3C_VIC1_BASE		S3C_IRQ(32)
-#define S3C_VIC2_BASE		S3C_IRQ(64)
-
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S3CUART_BASE0	(16)
-#define IRQ_S3CUART_BASE1	(20)
-#define IRQ_S3CUART_BASE2	(24)
-#define IRQ_S3CUART_BASE3	(28)
-
-#define UART_IRQ_RXD		(0)
-#define UART_IRQ_ERR		(1)
-#define UART_IRQ_TXD		(2)
-#define UART_IRQ_MODEM		(3)
-
-#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
-
-/* VIC based IRQs */
-
-#define S5PC1XX_IRQ_VIC0(x)	(S3C_VIC0_BASE + (x))
-#define S5PC1XX_IRQ_VIC1(x)	(S3C_VIC1_BASE + (x))
-#define S5PC1XX_IRQ_VIC2(x)	(S3C_VIC2_BASE + (x))
-
-/*
- * VIC0: system, DMA, timer
- */
-#define IRQ_EINT0		S5PC1XX_IRQ_VIC0(0)
-#define IRQ_EINT1		S5PC1XX_IRQ_VIC0(1)
-#define IRQ_EINT2		S5PC1XX_IRQ_VIC0(2)
-#define IRQ_EINT3		S5PC1XX_IRQ_VIC0(3)
-#define IRQ_EINT4		S5PC1XX_IRQ_VIC0(4)
-#define IRQ_EINT5		S5PC1XX_IRQ_VIC0(5)
-#define IRQ_EINT6		S5PC1XX_IRQ_VIC0(6)
-#define IRQ_EINT7		S5PC1XX_IRQ_VIC0(7)
-#define IRQ_EINT8		S5PC1XX_IRQ_VIC0(8)
-#define IRQ_EINT9		S5PC1XX_IRQ_VIC0(9)
-#define IRQ_EINT10		S5PC1XX_IRQ_VIC0(10)
-#define IRQ_EINT11		S5PC1XX_IRQ_VIC0(11)
-#define IRQ_EINT12		S5PC1XX_IRQ_VIC0(12)
-#define IRQ_EINT13		S5PC1XX_IRQ_VIC0(13)
-#define IRQ_EINT14		S5PC1XX_IRQ_VIC0(14)
-#define IRQ_EINT15		S5PC1XX_IRQ_VIC0(15)
-#define IRQ_EINT16_31		S5PC1XX_IRQ_VIC0(16)
-#define IRQ_BATF		S5PC1XX_IRQ_VIC0(17)
-#define IRQ_MDMA		S5PC1XX_IRQ_VIC0(18)
-#define IRQ_PDMA0		S5PC1XX_IRQ_VIC0(19)
-#define IRQ_PDMA1		S5PC1XX_IRQ_VIC0(20)
-#define IRQ_TIMER0_VIC		S5PC1XX_IRQ_VIC0(21)
-#define IRQ_TIMER1_VIC		S5PC1XX_IRQ_VIC0(22)
-#define IRQ_TIMER2_VIC		S5PC1XX_IRQ_VIC0(23)
-#define IRQ_TIMER3_VIC		S5PC1XX_IRQ_VIC0(24)
-#define IRQ_TIMER4_VIC		S5PC1XX_IRQ_VIC0(25)
-#define IRQ_SYSTIMER		S5PC1XX_IRQ_VIC0(26)
-#define IRQ_WDT			S5PC1XX_IRQ_VIC0(27)
-#define IRQ_RTC_ALARM		S5PC1XX_IRQ_VIC0(28)
-#define IRQ_RTC_TIC		S5PC1XX_IRQ_VIC0(29)
-#define IRQ_GPIOINT		S5PC1XX_IRQ_VIC0(30)
-
-/*
- * VIC1: ARM, power, memory, connectivity
- */
-#define IRQ_CORTEX0		S5PC1XX_IRQ_VIC1(0)
-#define IRQ_CORTEX1		S5PC1XX_IRQ_VIC1(1)
-#define IRQ_CORTEX2		S5PC1XX_IRQ_VIC1(2)
-#define IRQ_CORTEX3		S5PC1XX_IRQ_VIC1(3)
-#define IRQ_CORTEX4		S5PC1XX_IRQ_VIC1(4)
-#define IRQ_IEMAPC		S5PC1XX_IRQ_VIC1(5)
-#define IRQ_IEMIEC		S5PC1XX_IRQ_VIC1(6)
-#define IRQ_ONENAND		S5PC1XX_IRQ_VIC1(7)
-#define IRQ_NFC			S5PC1XX_IRQ_VIC1(8)
-#define IRQ_CFC			S5PC1XX_IRQ_VIC1(9)
-#define IRQ_UART0		S5PC1XX_IRQ_VIC1(10)
-#define IRQ_UART1		S5PC1XX_IRQ_VIC1(11)
-#define IRQ_UART2		S5PC1XX_IRQ_VIC1(12)
-#define IRQ_UART3		S5PC1XX_IRQ_VIC1(13)
-#define IRQ_IIC			S5PC1XX_IRQ_VIC1(14)
-#define IRQ_SPI0		S5PC1XX_IRQ_VIC1(15)
-#define IRQ_SPI1		S5PC1XX_IRQ_VIC1(16)
-#define IRQ_SPI2		S5PC1XX_IRQ_VIC1(17)
-#define IRQ_IRDA		S5PC1XX_IRQ_VIC1(18)
-#define IRQ_CAN0		S5PC1XX_IRQ_VIC1(19)
-#define IRQ_CAN1		S5PC1XX_IRQ_VIC1(20)
-#define IRQ_HSIRX		S5PC1XX_IRQ_VIC1(21)
-#define IRQ_HSITX		S5PC1XX_IRQ_VIC1(22)
-#define IRQ_UHOST		S5PC1XX_IRQ_VIC1(23)
-#define IRQ_OTG			S5PC1XX_IRQ_VIC1(24)
-#define IRQ_MSM			S5PC1XX_IRQ_VIC1(25)
-#define IRQ_HSMMC0		S5PC1XX_IRQ_VIC1(26)
-#define IRQ_HSMMC1		S5PC1XX_IRQ_VIC1(27)
-#define IRQ_HSMMC2		S5PC1XX_IRQ_VIC1(28)
-#define IRQ_MIPICSI		S5PC1XX_IRQ_VIC1(29)
-#define IRQ_MIPIDSI		S5PC1XX_IRQ_VIC1(30)
-
-/*
- * VIC2: multimedia, audio, security
- */
-#define IRQ_LCD0		S5PC1XX_IRQ_VIC2(0)
-#define IRQ_LCD1		S5PC1XX_IRQ_VIC2(1)
-#define IRQ_LCD2		S5PC1XX_IRQ_VIC2(2)
-#define IRQ_LCD3		S5PC1XX_IRQ_VIC2(3)
-#define IRQ_ROTATOR		S5PC1XX_IRQ_VIC2(4)
-#define IRQ_FIMC0		S5PC1XX_IRQ_VIC2(5)
-#define IRQ_FIMC1		S5PC1XX_IRQ_VIC2(6)
-#define IRQ_FIMC2		S5PC1XX_IRQ_VIC2(7)
-#define IRQ_JPEG		S5PC1XX_IRQ_VIC2(8)
-#define IRQ_2D			S5PC1XX_IRQ_VIC2(9)
-#define IRQ_3D			S5PC1XX_IRQ_VIC2(10)
-#define IRQ_MIXER		S5PC1XX_IRQ_VIC2(11)
-#define IRQ_HDMI		S5PC1XX_IRQ_VIC2(12)
-#define IRQ_IIC1		S5PC1XX_IRQ_VIC2(13)
-#define IRQ_MFC			S5PC1XX_IRQ_VIC2(14)
-#define IRQ_TVENC		S5PC1XX_IRQ_VIC2(15)
-#define IRQ_I2S0		S5PC1XX_IRQ_VIC2(16)
-#define IRQ_I2S1		S5PC1XX_IRQ_VIC2(17)
-#define IRQ_I2S2		S5PC1XX_IRQ_VIC2(18)
-#define IRQ_AC97		S5PC1XX_IRQ_VIC2(19)
-#define IRQ_PCM0		S5PC1XX_IRQ_VIC2(20)
-#define IRQ_PCM1		S5PC1XX_IRQ_VIC2(21)
-#define IRQ_SPDIF		S5PC1XX_IRQ_VIC2(22)
-#define IRQ_ADC			S5PC1XX_IRQ_VIC2(23)
-#define IRQ_PENDN		S5PC1XX_IRQ_VIC2(24)
-#define IRQ_TC			IRQ_PENDN
-#define IRQ_KEYPAD		S5PC1XX_IRQ_VIC2(25)
-#define IRQ_CG			S5PC1XX_IRQ_VIC2(26)
-#define IRQ_SEC			S5PC1XX_IRQ_VIC2(27)
-#define IRQ_SECRX		S5PC1XX_IRQ_VIC2(28)
-#define IRQ_SECTX		S5PC1XX_IRQ_VIC2(29)
-#define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
-#define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
-
-#define IRQ_TIMER(x)		(IRQ_SDMFIQ + 1 + (x))
-#define IRQ_TIMER0		IRQ_TIMER(0)
-#define IRQ_TIMER1		IRQ_TIMER(1)
-#define IRQ_TIMER2		IRQ_TIMER(2)
-#define IRQ_TIMER3		IRQ_TIMER(3)
-#define IRQ_TIMER4		IRQ_TIMER(4)
-
-/* External interrupt */
-#define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 6)
-
-#define S3C_EINT(x)		(S3C_IRQ_EINT_BASE + (x - 16))
-#define IRQ_EINT(x)		(x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
-#define IRQ_EINT_BIT(x)		(x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
-
-/* GPIO interrupt */
-#define S3C_IRQ_GPIO_BASE	(IRQ_EINT(31) + 1)
-#define S3C_IRQ_GPIO(x)		(S3C_IRQ_GPIO_BASE + (x))
-
-/*
- * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
- */
-#define NR_IRQS			(S3C_IRQ_GPIO(320) + 1)
-
-#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
-
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/pll.h linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/pll.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/pll.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/pll.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,38 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/pll.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX PLL code
- *
- * Based on plat-s3c64xx/include/plat/pll.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5P_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
-#define S5P_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
-#define S5P_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
-#define S5P_PLL_MDIV_SHIFT	(16)
-#define S5P_PLL_PDIV_SHIFT	(8)
-#define S5P_PLL_SDIV_SHIFT	(0)
-
-#include <asm/div64.h>
-
-static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
-					    u32 pllcon)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
-	pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
-	sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,252 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_CLOCK_H
-#define __PLAT_REGS_CLOCK_H __FILE__
-
-#define S5PC100_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
-#define S5PC100_CLKREG_OTHER(x)		(S5PC1XX_VA_CLK_OTHER + (x))
-
-/* s5pc100 register for clock */
-#define S5PC100_APLL_LOCK		S5PC100_CLKREG(0x00)
-#define S5PC100_MPLL_LOCK		S5PC100_CLKREG(0x04)
-#define S5PC100_EPLL_LOCK		S5PC100_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK		S5PC100_CLKREG(0x0C)
-
-#define S5PC100_APLL_CON		S5PC100_CLKREG(0x100)
-#define S5PC100_MPLL_CON		S5PC100_CLKREG(0x104)
-#define S5PC100_EPLL_CON		S5PC100_CLKREG(0x108)
-#define S5PC100_HPLL_CON		S5PC100_CLKREG(0x10C)
-
-#define S5PC100_CLKSRC0			S5PC100_CLKREG(0x200)
-#define S5PC100_CLKSRC1			S5PC100_CLKREG(0x204)
-#define S5PC100_CLKSRC2			S5PC100_CLKREG(0x208)
-#define S5PC100_CLKSRC3			S5PC100_CLKREG(0x20C)
-
-#define S5PC100_CLKDIV0			S5PC100_CLKREG(0x300)
-#define S5PC100_CLKDIV1			S5PC100_CLKREG(0x304)
-#define S5PC100_CLKDIV2			S5PC100_CLKREG(0x308)
-#define S5PC100_CLKDIV3			S5PC100_CLKREG(0x30C)
-#define S5PC100_CLKDIV4			S5PC100_CLKREG(0x310)
-
-#define S5PC100_CLK_OUT			S5PC100_CLKREG(0x400)
-
-#define S5PC100_CLKGATE_D00		S5PC100_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01		S5PC100_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02		S5PC100_CLKREG(0x508)
-
-#define S5PC100_CLKGATE_D10		S5PC100_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11		S5PC100_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12		S5PC100_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13		S5PC100_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14		S5PC100_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15		S5PC100_CLKREG(0x534)
-
-#define S5PC100_CLKGATE_D20		S5PC100_CLKREG(0x540)
-
-#define S5PC100_SCLKGATE0		S5PC100_CLKREG(0x560)
-#define S5PC100_SCLKGATE1		S5PC100_CLKREG(0x564)
-
-/* EPLL_CON */
-#define S5PC100_EPLL_EN			(1<<31)
-#define S5PC100_EPLL_MASK		0xffffffff
-#define S5PC100_EPLLVAL(_m, _p, _s)	((_m) << 16 | ((_p) << 8) | ((_s)))
-
-/* CLKSRC0..CLKSRC3 -> mostly removed due to clksrc updates */
-#define S5PC100_CLKSRC1_CLK48M_MASK	(0x1<<24)
-#define S5PC100_CLKSRC1_CLK48M_SHIFT	(24)
-
-/* CLKDIV0 */
-#define S5PC100_CLKDIV0_APLL_MASK		(0x1<<0)
-#define S5PC100_CLKDIV0_APLL_SHIFT		(0)
-#define S5PC100_CLKDIV0_ARM_MASK		(0x7<<4)
-#define S5PC100_CLKDIV0_ARM_SHIFT		(4)
-#define S5PC100_CLKDIV0_D0_MASK		(0x7<<8)
-#define S5PC100_CLKDIV0_D0_SHIFT		(8)
-#define S5PC100_CLKDIV0_PCLKD0_MASK		(0x7<<12)
-#define S5PC100_CLKDIV0_PCLKD0_SHIFT	(12)
-#define S5PC100_CLKDIV0_SECSS_MASK		(0x7<<16)
-#define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
-
-/* CLKDIV1 (OneNAND clock only used in one place, removed) */
-#define S5PC100_CLKDIV1_APLL2_MASK		(0x7<<0)
-#define S5PC100_CLKDIV1_APLL2_SHIFT		(0)
-#define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
-#define S5PC100_CLKDIV1_MPLL_SHIFT		(4)
-#define S5PC100_CLKDIV1_MPLL2_MASK		(0x1<<8)
-#define S5PC100_CLKDIV1_MPLL2_SHIFT		(8)
-#define S5PC100_CLKDIV1_D1_MASK		(0x7<<12)
-#define S5PC100_CLKDIV1_D1_SHIFT		(12)
-#define S5PC100_CLKDIV1_PCLKD1_MASK		(0x7<<16)
-#define S5PC100_CLKDIV1_PCLKD1_SHIFT	(16)
-#define S5PC100_CLKDIV1_CAM_MASK		(0x1F<<24)
-#define S5PC100_CLKDIV1_CAM_SHIFT		(24)
-
-/* CLKDIV2 => removed in clksrc update */
-/* CLKDIV3 => removed in clksrc update, or not needed */
-/* CLKDIV4 => removed in clksrc update, or not needed */
-
-/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D00_INTC		(1<<0)
-#define S5PC100_CLKGATE_D00_TZIC		(1<<1)
-#define S5PC100_CLKGATE_D00_CFCON		(1<<2)
-#define S5PC100_CLKGATE_D00_MDMA		(1<<3)
-#define S5PC100_CLKGATE_D00_G2D		(1<<4)
-#define S5PC100_CLKGATE_D00_SECSS		(1<<5)
-#define S5PC100_CLKGATE_D00_CSSYS		(1<<6)
-
-/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D01_DMC		(1<<0)
-#define S5PC100_CLKGATE_D01_SROMC		(1<<1)
-#define S5PC100_CLKGATE_D01_ONENAND		(1<<2)
-#define S5PC100_CLKGATE_D01_NFCON		(1<<3)
-#define S5PC100_CLKGATE_D01_INTMEM		(1<<4)
-#define S5PC100_CLKGATE_D01_EBI		(1<<5)
-
-/* PCLKD0 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D02_SECKEY		(1<<1)
-#define S5PC100_CLKGATE_D02_SDM		(1<<2)
-
-/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D10_PDMA0		(1<<0)
-#define S5PC100_CLKGATE_D10_PDMA1		(1<<1)
-#define S5PC100_CLKGATE_D10_USBHOST		(1<<2)
-#define S5PC100_CLKGATE_D10_USBOTG		(1<<3)
-#define S5PC100_CLKGATE_D10_MODEMIF		(1<<4)
-#define S5PC100_CLKGATE_D10_HSMMC0		(1<<5)
-#define S5PC100_CLKGATE_D10_HSMMC1		(1<<6)
-#define S5PC100_CLKGATE_D10_HSMMC2		(1<<7)
-
-/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
-#define S5PC100_CLKGATE_D11_LCD		(1<<0)
-#define S5PC100_CLKGATE_D11_ROTATOR		(1<<1)
-#define S5PC100_CLKGATE_D11_FIMC0		(1<<2)
-#define S5PC100_CLKGATE_D11_FIMC1		(1<<3)
-#define S5PC100_CLKGATE_D11_FIMC2		(1<<4)
-#define S5PC100_CLKGATE_D11_JPEG		(1<<5)
-#define S5PC100_CLKGATE_D11_DSI		(1<<6)
-#define S5PC100_CLKGATE_D11_CSI		(1<<7)
-#define S5PC100_CLKGATE_D11_G3D		(1<<8)
-
-/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
-#define S5PC100_CLKGATE_D12_TV		(1<<0)
-#define S5PC100_CLKGATE_D12_VP		(1<<1)
-#define S5PC100_CLKGATE_D12_MIXER		(1<<2)
-#define S5PC100_CLKGATE_D12_HDMI		(1<<3)
-#define S5PC100_CLKGATE_D12_MFC		(1<<4)
-
-/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
-#define S5PC100_CLKGATE_D13_CHIPID		(1<<0)
-#define S5PC100_CLKGATE_D13_GPIO		(1<<1)
-#define S5PC100_CLKGATE_D13_APC		(1<<2)
-#define S5PC100_CLKGATE_D13_IEC		(1<<3)
-#define S5PC100_CLKGATE_D13_PWM		(1<<6)
-#define S5PC100_CLKGATE_D13_SYSTIMER	(1<<7)
-#define S5PC100_CLKGATE_D13_WDT		(1<<8)
-#define S5PC100_CLKGATE_D13_RTC		(1<<9)
-
-/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
-#define S5PC100_CLKGATE_D14_UART0		(1<<0)
-#define S5PC100_CLKGATE_D14_UART1		(1<<1)
-#define S5PC100_CLKGATE_D14_UART2		(1<<2)
-#define S5PC100_CLKGATE_D14_UART3		(1<<3)
-#define S5PC100_CLKGATE_D14_IIC		(1<<4)
-#define S5PC100_CLKGATE_D14_HDMI_IIC	(1<<5)
-#define S5PC100_CLKGATE_D14_SPI0		(1<<6)
-#define S5PC100_CLKGATE_D14_SPI1		(1<<7)
-#define S5PC100_CLKGATE_D14_SPI2		(1<<8)
-#define S5PC100_CLKGATE_D14_IRDA		(1<<9)
-#define S5PC100_CLKGATE_D14_CCAN0		(1<<10)
-#define S5PC100_CLKGATE_D14_CCAN1		(1<<11)
-#define S5PC100_CLKGATE_D14_HSITX		(1<<12)
-#define S5PC100_CLKGATE_D14_HSIRX		(1<<13)
-
-/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
-#define S5PC100_CLKGATE_D15_IIS0		(1<<0)
-#define S5PC100_CLKGATE_D15_IIS1		(1<<1)
-#define S5PC100_CLKGATE_D15_IIS2		(1<<2)
-#define S5PC100_CLKGATE_D15_AC97		(1<<3)
-#define S5PC100_CLKGATE_D15_PCM0		(1<<4)
-#define S5PC100_CLKGATE_D15_PCM1		(1<<5)
-#define S5PC100_CLKGATE_D15_SPDIF		(1<<6)
-#define S5PC100_CLKGATE_D15_TSADC		(1<<7)
-#define S5PC100_CLKGATE_D15_KEYIF		(1<<8)
-#define S5PC100_CLKGATE_D15_CG		(1<<9)
-
-/* HCLKD2 Clock Gate 0 Registers */
-#define S5PC100_CLKGATE_D20_HCLKD2		(1<<0)
-#define S5PC100_CLKGATE_D20_I2SD2		(1<<1)
-
-/* Special Clock Gate 0 Registers */
-#define	S5PC100_CLKGATE_SCLK0_HPM		(1<<0)
-#define	S5PC100_CLKGATE_SCLK0_PWI		(1<<1)
-#define	S5PC100_CLKGATE_SCLK0_ONENAND	(1<<2)
-#define	S5PC100_CLKGATE_SCLK0_UART		(1<<3)
-#define	S5PC100_CLKGATE_SCLK0_SPI0		(1<<4)
-#define	S5PC100_CLKGATE_SCLK0_SPI1		(1<<5)
-#define	S5PC100_CLKGATE_SCLK0_SPI2		(1<<6)
-#define	S5PC100_CLKGATE_SCLK0_SPI0_48	(1<<7)
-#define	S5PC100_CLKGATE_SCLK0_SPI1_48	(1<<8)
-#define	S5PC100_CLKGATE_SCLK0_SPI2_48	(1<<9)
-#define	S5PC100_CLKGATE_SCLK0_IRDA		(1<<10)
-#define	S5PC100_CLKGATE_SCLK0_USBHOST	(1<<11)
-#define	S5PC100_CLKGATE_SCLK0_MMC0		(1<<12)
-#define	S5PC100_CLKGATE_SCLK0_MMC1		(1<<13)
-#define	S5PC100_CLKGATE_SCLK0_MMC2		(1<<14)
-#define	S5PC100_CLKGATE_SCLK0_MMC0_48	(1<<15)
-#define	S5PC100_CLKGATE_SCLK0_MMC1_48	(1<<16)
-#define	S5PC100_CLKGATE_SCLK0_MMC2_48	(1<<17)
-
-/* Special Clock Gate 1 Registers */
-#define	S5PC100_CLKGATE_SCLK1_LCD		(1<<0)
-#define	S5PC100_CLKGATE_SCLK1_FIMC0		(1<<1)
-#define	S5PC100_CLKGATE_SCLK1_FIMC1		(1<<2)
-#define	S5PC100_CLKGATE_SCLK1_FIMC2		(1<<3)
-#define	S5PC100_CLKGATE_SCLK1_TV54		(1<<4)
-#define	S5PC100_CLKGATE_SCLK1_VDAC54	(1<<5)
-#define	S5PC100_CLKGATE_SCLK1_MIXER		(1<<6)
-#define	S5PC100_CLKGATE_SCLK1_HDMI		(1<<7)
-#define	S5PC100_CLKGATE_SCLK1_AUDIO0	(1<<8)
-#define	S5PC100_CLKGATE_SCLK1_AUDIO1	(1<<9)
-#define	S5PC100_CLKGATE_SCLK1_AUDIO2	(1<<10)
-#define	S5PC100_CLKGATE_SCLK1_SPDIF		(1<<11)
-#define	S5PC100_CLKGATE_SCLK1_CAM		(1<<12)
-
-#define S5PC100_SWRESET		S5PC100_CLKREG_OTHER(0x000)
-#define S5PC100_OND_SWRESET	S5PC100_CLKREG_OTHER(0x008)
-#define S5PC100_GEN_CTRL	S5PC100_CLKREG_OTHER(0x100)
-#define S5PC100_GEN_STATUS	S5PC100_CLKREG_OTHER(0x104)
-#define S5PC100_MEM_SYS_CFG	S5PC100_CLKREG_OTHER(0x200)
-#define S5PC100_CAM_MUX_SEL	S5PC100_CLKREG_OTHER(0x300)
-#define S5PC100_MIXER_OUT_SEL	S5PC100_CLKREG_OTHER(0x304)
-#define S5PC100_LPMP_MODE_SEL	S5PC100_CLKREG_OTHER(0x308)
-#define S5PC100_MIPI_PHY_CON0	S5PC100_CLKREG_OTHER(0x400)
-#define S5PC100_MIPI_PHY_CON1	S5PC100_CLKREG_OTHER(0x414)
-#define S5PC100_HDMI_PHY_CON0	S5PC100_CLKREG_OTHER(0x420)
-
-#define S5PC100_SWRESET_RESETVAL	0xc100
-#define S5PC100_OTHER_SYS_INT	24
-#define S5PC100_OTHER_STA_TYPE	23
-#define STA_TYPE_EXPON		0
-#define STA_TYPE_SFR		1
-
-#define S5PC100_SLEEP_CFG_OSC_EN	0
-
-/* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK	(1 << 16)
-#define S5PC100_OTHERS_MIPI_DPHY_EN		(1 << 28)
-
-/* MIPI D-PHY Control Register 0 */
-#define S5PC100_MIPI_PHY_CON0_M_RESETN	(1 << 1)
-#define S5PC100_MIPI_PHY_CON0_S_RESETN	(1 << 0)
-
-#endif /* _PLAT_REGS_CLOCK_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - GPIO register definitions
- */
-
-#ifndef __ASM_PLAT_S5PC1XX_REGS_GPIO_H
-#define __ASM_PLAT_S5PC1XX_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-
-/* S5PC100 */
-#define S5PC100_GPIO_BASE	S5PC1XX_VA_GPIO
-#define S5PC100_GPA0_BASE	(S5PC100_GPIO_BASE + 0x0000)
-#define S5PC100_GPA1_BASE	(S5PC100_GPIO_BASE + 0x0020)
-#define S5PC100_GPB_BASE	(S5PC100_GPIO_BASE + 0x0040)
-#define S5PC100_GPC_BASE	(S5PC100_GPIO_BASE + 0x0060)
-#define S5PC100_GPD_BASE	(S5PC100_GPIO_BASE + 0x0080)
-#define S5PC100_GPE0_BASE	(S5PC100_GPIO_BASE + 0x00A0)
-#define S5PC100_GPE1_BASE	(S5PC100_GPIO_BASE + 0x00C0)
-#define S5PC100_GPF0_BASE	(S5PC100_GPIO_BASE + 0x00E0)
-#define S5PC100_GPF1_BASE	(S5PC100_GPIO_BASE + 0x0100)
-#define S5PC100_GPF2_BASE	(S5PC100_GPIO_BASE + 0x0120)
-#define S5PC100_GPF3_BASE	(S5PC100_GPIO_BASE + 0x0140)
-#define S5PC100_GPG0_BASE	(S5PC100_GPIO_BASE + 0x0160)
-#define S5PC100_GPG1_BASE	(S5PC100_GPIO_BASE + 0x0180)
-#define S5PC100_GPG2_BASE	(S5PC100_GPIO_BASE + 0x01A0)
-#define S5PC100_GPG3_BASE	(S5PC100_GPIO_BASE + 0x01C0)
-#define S5PC100_GPH0_BASE	(S5PC100_GPIO_BASE + 0x0C00)
-#define S5PC100_GPH1_BASE	(S5PC100_GPIO_BASE + 0x0C20)
-#define S5PC100_GPH2_BASE	(S5PC100_GPIO_BASE + 0x0C40)
-#define S5PC100_GPH3_BASE	(S5PC100_GPIO_BASE + 0x0C60)
-#define S5PC100_GPI_BASE	(S5PC100_GPIO_BASE + 0x01E0)
-#define S5PC100_GPJ0_BASE	(S5PC100_GPIO_BASE + 0x0200)
-#define S5PC100_GPJ1_BASE	(S5PC100_GPIO_BASE + 0x0220)
-#define S5PC100_GPJ2_BASE	(S5PC100_GPIO_BASE + 0x0240)
-#define S5PC100_GPJ3_BASE	(S5PC100_GPIO_BASE + 0x0260)
-#define S5PC100_GPJ4_BASE	(S5PC100_GPIO_BASE + 0x0280)
-#define S5PC100_GPK0_BASE	(S5PC100_GPIO_BASE + 0x02A0)
-#define S5PC100_GPK1_BASE	(S5PC100_GPIO_BASE + 0x02C0)
-#define S5PC100_GPK2_BASE	(S5PC100_GPIO_BASE + 0x02E0)
-#define S5PC100_GPK3_BASE	(S5PC100_GPIO_BASE + 0x0300)
-#define S5PC100_GPL0_BASE	(S5PC100_GPIO_BASE + 0x0320)
-#define S5PC100_GPL1_BASE	(S5PC100_GPIO_BASE + 0x0340)
-#define S5PC100_GPL2_BASE	(S5PC100_GPIO_BASE + 0x0360)
-#define S5PC100_GPL3_BASE	(S5PC100_GPIO_BASE + 0x0380)
-#define S5PC100_GPL4_BASE	(S5PC100_GPIO_BASE + 0x03A0)
-#define S5PC100_EINT_BASE	(S5PC100_GPIO_BASE + 0x0E00)
-
-#define S5PC100_UHOST		(S5PC100_GPIO_BASE + 0x0B68)
-#define S5PC100_PDNEN		(S5PC100_GPIO_BASE + 0x0F80)
-
-/* PDNEN */
-#define S5PC100_PDNEN_CFG_PDNEN	(1 << 1)
-#define S5PC100_PDNEN_CFG_AUTO	(0 << 1)
-#define S5PC100_PDNEN_POWERDOWN	(1 << 0)
-#define S5PC100_PDNEN_NORMAL	(0 << 0)
-
-/* Common part */
-/* External interrupt base is same at both s5pc100 and s5pc110 */
-#define S5PC1XX_EINT_BASE	(S5PC100_EINT_BASE)
-
-#define S5PC100_GPx_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
-#define S5PC100_GPx_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
-#define S5PC100_GPx_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
-
-#endif /* __ASM_PLAT_S5PC1XX_REGS_GPIO_H */
-
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/regs-power.h linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/regs-power.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/regs-power.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,84 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Jongse Won <jongse.won@samsung.com>
- *
- * S5PC1XX clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S5PC1XX_PWRREG(x)			(S5PC1XX_VA_PWR + (x))
-
-/* s5pc100 (0xE0108000) register for power management */
-#define S5PC100_PWR_CFG				S5PC1XX_PWRREG(0x0)
-#define S5PC100_EINT_WAKEUP_MASK		S5PC1XX_PWRREG(0x4)
-#define S5PC100_NORMAL_CFG			S5PC1XX_PWRREG(0x10)
-#define S5PC100_STOP_CFG			S5PC1XX_PWRREG(0x14)
-#define S5PC100_SLEEP_CFG			S5PC1XX_PWRREG(0x18)
-#define S5PC100_STOP_MEM_CFG			S5PC1XX_PWRREG(0x1C)
-#define S5PC100_OSC_FREQ			S5PC1XX_PWRREG(0x100)
-#define S5PC100_OSC_STABLE			S5PC1XX_PWRREG(0x104)
-#define S5PC100_PWR_STABLE			S5PC1XX_PWRREG(0x108)
-#define S5PC100_MTC_STABLE			S5PC1XX_PWRREG(0x110)
-#define S5PC100_CLAMP_STABLE			S5PC1XX_PWRREG(0x114)
-#define S5PC100_OTHERS				S5PC1XX_PWRREG(0x200)
-#define S5PC100_RST_STAT			S5PC1XX_PWRREG(0x300)
-#define S5PC100_WAKEUP_STAT			S5PC1XX_PWRREG(0x304)
-#define S5PC100_BLK_PWR_STAT			S5PC1XX_PWRREG(0x308)
-#define S5PC100_INFORM0				S5PC1XX_PWRREG(0x400)
-#define S5PC100_INFORM1				S5PC1XX_PWRREG(0x404)
-#define S5PC100_INFORM2				S5PC1XX_PWRREG(0x408)
-#define S5PC100_INFORM3				S5PC1XX_PWRREG(0x40C)
-#define S5PC100_INFORM4				S5PC1XX_PWRREG(0x410)
-#define S5PC100_INFORM5				S5PC1XX_PWRREG(0x414)
-#define S5PC100_INFORM6				S5PC1XX_PWRREG(0x418)
-#define S5PC100_INFORM7				S5PC1XX_PWRREG(0x41C)
-#define S5PC100_DCGIDX_MAP0			S5PC1XX_PWRREG(0x500)
-#define S5PC100_DCGIDX_MAP1			S5PC1XX_PWRREG(0x504)
-#define S5PC100_DCGIDX_MAP2			S5PC1XX_PWRREG(0x508)
-#define S5PC100_DCGPERF_MAP0			S5PC1XX_PWRREG(0x50C)
-#define S5PC100_DCGPERF_MAP1			S5PC1XX_PWRREG(0x510)
-#define S5PC100_DVCIDX_MAP			S5PC1XX_PWRREG(0x514)
-#define S5PC100_FREQ_CPU			S5PC1XX_PWRREG(0x518)
-#define S5PC100_FREQ_DPM			S5PC1XX_PWRREG(0x51C)
-#define S5PC100_DVSEMCLK_EN			S5PC1XX_PWRREG(0x520)
-#define S5PC100_APLL_CON_L8			S5PC1XX_PWRREG(0x600)
-#define S5PC100_APLL_CON_L7			S5PC1XX_PWRREG(0x604)
-#define S5PC100_APLL_CON_L6			S5PC1XX_PWRREG(0x608)
-#define S5PC100_APLL_CON_L5			S5PC1XX_PWRREG(0x60C)
-#define S5PC100_APLL_CON_L4			S5PC1XX_PWRREG(0x610)
-#define S5PC100_APLL_CON_L3			S5PC1XX_PWRREG(0x614)
-#define S5PC100_APLL_CON_L2			S5PC1XX_PWRREG(0x618)
-#define S5PC100_APLL_CON_L1			S5PC1XX_PWRREG(0x61C)
-#define S5PC100_IEM_CONTROL			S5PC1XX_PWRREG(0x620)
-#define S5PC100_CLKDIV_IEM_L8			S5PC1XX_PWRREG(0x700)
-#define S5PC100_CLKDIV_IEM_L7			S5PC1XX_PWRREG(0x704)
-#define S5PC100_CLKDIV_IEM_L6			S5PC1XX_PWRREG(0x708)
-#define S5PC100_CLKDIV_IEM_L5			S5PC1XX_PWRREG(0x70C)
-#define S5PC100_CLKDIV_IEM_L4			S5PC1XX_PWRREG(0x710)
-#define S5PC100_CLKDIV_IEM_L3			S5PC1XX_PWRREG(0x714)
-#define S5PC100_CLKDIV_IEM_L2			S5PC1XX_PWRREG(0x718)
-#define S5PC100_CLKDIV_IEM_L1			S5PC1XX_PWRREG(0x71C)
-#define S5PC100_IEM_HPMCLK_DIV			S5PC1XX_PWRREG(0x724)
-
-/* PWR_CFG */
-#define S5PC100_PWRCFG_CFG_DEEP_IDLE		(1 << 31)
-#define S5PC100_PWRCFG_CFG_WFI_MASK		(3 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_IDLE		(0 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE	(1 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_STOP		(2 << 5)
-#define S5PC100_PWRCFG_CFG_WFI_SLEEP		(3 << 5)
-
-/* SLEEP_CFG */
-#define S5PC100_SLEEP_OSC_EN_SLEEP		(1 << 0)
-
-/* OTHERS */
-#define S5PC100_PMU_INT_DISABLE			(1 << 24)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,64 +0,0 @@
-/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Header file for s5pc100 cpu support
- *
- * Based on plat-s3c64xx/include/plat/s3c6400.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* Common init code for S5PC100 related SoCs */
-extern  int s5pc100_init(void);
-extern void s5pc100_map_io(void);
-extern void s5pc100_init_clocks(int xtal);
-extern  int s5pc100_register_baseclocks(unsigned long xtal);
-extern void s5pc100_init_irq(void);
-extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
-extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s5pc100_register_clocks(void);
-extern void s5pc100_setup_clocks(void);
-extern struct sysdev_class s5pc100_sysclass;
-
-#define s5pc100_init_uarts s5pc100_common_init_uarts
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
-extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
-extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
-extern struct clk clk_hpll;
-extern struct clk clk_hd0;
-extern struct clk clk_pd0;
-extern struct clk clk_54m;
-extern void s5pc1xx_register_clocks(void);
-extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
-
-/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
-extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
-extern struct platform_device s3c_device_g2d;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_vpp;
-extern struct platform_device s3c_device_tvenc;
-extern struct platform_device s3c_device_tvscaler;
-extern struct platform_device s3c_device_rotator;
-extern struct platform_device s3c_device_jpeg;
-extern struct platform_device s3c_device_onenand;
-extern struct platform_device s3c_device_usb_otghcd;
-extern struct platform_device s3c_device_keypad;
-extern struct platform_device s3c_device_ts;
-extern struct platform_device s3c_device_g3d;
-extern struct platform_device s3c_device_smc911x;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_mfc;
-extern struct platform_device s3c_device_ac97;
-extern struct platform_device s3c_device_fimc0;
-extern struct platform_device s3c_device_fimc1;
-extern struct platform_device s3c_device_fimc2;
-
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/irq.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/irq.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/irq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/irq.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,75 +0,0 @@
-/* arch/arm/plat-s5pc1xx/irq.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC1XX - Interrupt handling
- *
- * Based on plat-s3c64xx/irq.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-#include <plat/irq-vic-timer.h>
-#include <plat/irq-uart.h>
-#include <plat/cpu.h>
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static struct s3c_uart_irq uart_irqs[] = {
-	[0] = {
-		.regs		= (void *)S3C_VA_UART0,
-		.base_irq	= IRQ_S3CUART_BASE0,
-		.parent_irq	= IRQ_UART0,
-	},
-	[1] = {
-		.regs		= (void *)S3C_VA_UART1,
-		.base_irq	= IRQ_S3CUART_BASE1,
-		.parent_irq	= IRQ_UART1,
-	},
-	[2] = {
-		.regs		= (void *)S3C_VA_UART2,
-		.base_irq	= IRQ_S3CUART_BASE2,
-		.parent_irq	= IRQ_UART2,
-	},
-	[3] = {
-		.regs		= (void *)S3C_VA_UART3,
-		.base_irq	= IRQ_S3CUART_BASE3,
-		.parent_irq	= IRQ_UART3,
-	},
-};
-
-void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
-{
-	int i;
-
-	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
-
-	/* initialise the pair of VICs */
-	for (i = 0; i < num; i++)
-		vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
-				vic_valid[i], 0);
-
-	/* add the timer sub-irqs */
-
-	s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
-	s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
-	s3c_init_vic_timer_irq(IRQ_TIMER2_VIC, IRQ_TIMER2);
-	s3c_init_vic_timer_irq(IRQ_TIMER3_VIC, IRQ_TIMER3);
-	s3c_init_vic_timer_irq(IRQ_TIMER4_VIC, IRQ_TIMER4);
-
-	s3c_init_uart_irqs(uart_irqs, ARRAY_SIZE(uart_irqs));
-}
-
-
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/irq-eint.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/irq-eint.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/irq-eint.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/irq-eint.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,281 +0,0 @@
-/*
- * linux/arch/arm/plat-s5pc1xx/irq-eint.c
- *
- *  Copyright 2009 Samsung Electronics Co.
- *  Byungho Min <bhmin@samsung.com>
- *  Kyungin Park <kyungmin.park@samsung.com>
- *
- * Based on plat-s3c64xx/irq-eint.c
- *
- * S5PC1XX - Interrupt handling for IRQ_EINT(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/pm.h>
-#include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-ext.h>
-#include <plat/pm.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-irqtype.h>
-
-/*
- * bank is a group of external interrupt
- * bank0 means EINT0 ... EINT7
- * bank1 means EINT8 ... EINT15
- * bank2 means EINT16 ... EINT23
- * bank3 means EINT24 ... EINT31
- */
-
-static inline int s3c_get_eint(unsigned int irq)
-{
-	int real;
-
-	if (irq < IRQ_EINT16_31)
-		real = (irq - IRQ_EINT0);
-	else
-		real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
-
-	return real;
-}
-
-static inline int s3c_get_bank(unsigned int irq)
-{
-	return s3c_get_eint(irq) >> 3;
-}
-
-static inline int s3c_eint_to_bit(unsigned int irq)
-{
-	int real, bit;
-
-	real = s3c_get_eint(irq);
-	bit = 1 << (real & (8 - 1));
-
-	return bit;
-}
-
-static inline void s3c_irq_eint_mask(unsigned int irq)
-{
-	u32 mask;
-	u32 bank = s3c_get_bank(irq);
-
-	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
-	mask |= s3c_eint_to_bit(irq);
-	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static void s3c_irq_eint_unmask(unsigned int irq)
-{
-	u32 mask;
-	u32 bank = s3c_get_bank(irq);
-
-	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
-	mask &= ~(s3c_eint_to_bit(irq));
-	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
-}
-
-static inline void s3c_irq_eint_ack(unsigned int irq)
-{
-	u32 bank = s3c_get_bank(irq);
-
-	__raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_eint_maskack(unsigned int irq)
-{
-	/* compiler should in-line these */
-	s3c_irq_eint_mask(irq);
-	s3c_irq_eint_ack(irq);
-}
-
-static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
-{
-	u32 bank = s3c_get_bank(irq);
-	int real = s3c_get_eint(irq);
-	int gpio, shift, sfn;
-	u32 ctrl, con = 0;
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No edge setting!\n");
-		break;
-
-	case IRQ_TYPE_EDGE_RISING:
-		con = S5PC1XX_WKUP_INT_RISEEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		con = S5PC1XX_WKUP_INT_FALLEDGE;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		con = S5PC1XX_WKUP_INT_BOTHEDGE;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		con = S5PC1XX_WKUP_INT_LOWLEV;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		con = S5PC1XX_WKUP_INT_HILEV;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	gpio = real & (8 - 1);
-	shift = gpio << 2;
-
-	ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
-	ctrl &= ~(0x7 << shift);
-	ctrl |= con << shift;
-	__raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
-
-	switch (real) {
-	case 0 ... 7:
-			gpio = S5PC100_GPH0(gpio);
-		break;
-	case 8 ... 15:
-			gpio = S5PC100_GPH1(gpio);
-		break;
-	case 16 ... 23:
-			gpio = S5PC100_GPH2(gpio);
-		break;
-	case 24 ... 31:
-			gpio = S5PC100_GPH3(gpio);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	sfn = S3C_GPIO_SFN(0x2);
-	s3c_gpio_cfgpin(gpio, sfn);
-
-	return 0;
-}
-
-static struct irq_chip s3c_irq_eint = {
-	.name		= "EINT",
-	.mask		= s3c_irq_eint_mask,
-	.unmask		= s3c_irq_eint_unmask,
-	.mask_ack	= s3c_irq_eint_maskack,
-	.ack		= s3c_irq_eint_ack,
-	.set_type	= s3c_irq_eint_set_type,
-	.set_wake	= s3c_irqext_wake,
-};
-
-/* s3c_irq_demux_eint
- *
- * This function demuxes the IRQ from external interrupts,
- * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
- * the specific handlers s3c_irq_demux_eintX_Y.
- */
-static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
-{
-	u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
-	u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
-	unsigned int irq;
-
-	status &= ~mask;
-	status &= (1 << (end - start + 1)) - 1;
-
-	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
-		if (status & 1)
-			generic_handle_irq(irq);
-
-		status >>= 1;
-	}
-}
-
-static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
-	s3c_irq_demux_eint(16, 23);
-	s3c_irq_demux_eint(24, 31);
-}
-
-/*
- * Handle EINT0 ... EINT15 at VIC directly
- */
-static void s3c_irq_vic_eint_mask(unsigned int irq)
-{
-	void __iomem *base = get_irq_chip_data(irq);
-	unsigned int real;
-
-	s3c_irq_eint_mask(irq);
-	real = s3c_get_eint(irq);
-	writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
-}
-
-static void s3c_irq_vic_eint_unmask(unsigned int irq)
-{
-	void __iomem *base = get_irq_chip_data(irq);
-	unsigned int real;
-
-	s3c_irq_eint_unmask(irq);
-	real = s3c_get_eint(irq);
-	writel(1 << real, base + VIC_INT_ENABLE);
-}
-
-static inline void s3c_irq_vic_eint_ack(unsigned int irq)
-{
-	u32 bit;
-	u32 bank = s3c_get_bank(irq);
-
-	bit = s3c_eint_to_bit(irq);
-	__raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
-}
-
-static void s3c_irq_vic_eint_maskack(unsigned int irq)
-{
-	/* compiler should in-line these */
-	s3c_irq_vic_eint_mask(irq);
-	s3c_irq_vic_eint_ack(irq);
-}
-
-static struct irq_chip s3c_irq_vic_eint = {
-	.name		= "EINT",
-	.mask		= s3c_irq_vic_eint_mask,
-	.unmask		= s3c_irq_vic_eint_unmask,
-	.mask_ack	= s3c_irq_vic_eint_maskack,
-	.ack		= s3c_irq_vic_eint_ack,
-	.set_type	= s3c_irq_eint_set_type,
-	.set_wake	= s3c_irqext_wake,
-};
-
-static int __init s5pc1xx_init_irq_eint(void)
-{
-	int irq;
-
-	for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
-		set_irq_chip(irq, &s3c_irq_vic_eint);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
-		set_irq_chip(irq, &s3c_irq_eint);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
-
-	return 0;
-}
-
-arch_initcall(s5pc1xx_init_irq_eint);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/irq-gpio.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/irq-gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/irq-gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/irq-gpio.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,266 +0,0 @@
-/*
- * arch/arm/plat-s5pc1xx/irq-gpio.c
- *
- * Copyright (C) 2009 Samsung Electronics
- *
- * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/gpio-cfg.h>
-
-#define S5PC1XX_GPIOREG(x)		(S5PC1XX_VA_GPIO + (x))
-
-#define CON_OFFSET			0x700
-#define MASK_OFFSET			0x900
-#define PEND_OFFSET			0xA00
-#define CON_OFFSET_2			0xE00
-#define MASK_OFFSET_2			0xF00
-#define PEND_OFFSET_2			0xF40
-
-#define GPIOINT_LEVEL_LOW		0x0
-#define GPIOINT_LEVEL_HIGH		0x1
-#define GPIOINT_EDGE_FALLING		0x2
-#define GPIOINT_EDGE_RISING		0x3
-#define GPIOINT_EDGE_BOTH		0x4
-
-static int group_to_con_offset(int group)
-{
-	return group << 2;
-}
-
-static int group_to_mask_offset(int group)
-{
-	return group << 2;
-}
-
-static int group_to_pend_offset(int group)
-{
-	return group << 2;
-}
-
-static int s5pc1xx_get_start(unsigned int group)
-{
-	switch (group) {
-	case 0: return S5PC100_GPIO_A0_START;
-	case 1: return S5PC100_GPIO_A1_START;
-	case 2: return S5PC100_GPIO_B_START;
-	case 3: return S5PC100_GPIO_C_START;
-	case 4: return S5PC100_GPIO_D_START;
-	case 5: return S5PC100_GPIO_E0_START;
-	case 6: return S5PC100_GPIO_E1_START;
-	case 7: return S5PC100_GPIO_F0_START;
-	case 8: return S5PC100_GPIO_F1_START;
-	case 9: return S5PC100_GPIO_F2_START;
-	case 10: return S5PC100_GPIO_F3_START;
-	case 11: return S5PC100_GPIO_G0_START;
-	case 12: return S5PC100_GPIO_G1_START;
-	case 13: return S5PC100_GPIO_G2_START;
-	case 14: return S5PC100_GPIO_G3_START;
-	case 15: return S5PC100_GPIO_I_START;
-	case 16: return S5PC100_GPIO_J0_START;
-	case 17: return S5PC100_GPIO_J1_START;
-	case 18: return S5PC100_GPIO_J2_START;
-	case 19: return S5PC100_GPIO_J3_START;
-	case 20: return S5PC100_GPIO_J4_START;
-	default:
-		BUG();
-	}
-
-	return -EINVAL;
-}
-
-static int s5pc1xx_get_group(unsigned int irq)
-{
-	irq -= S3C_IRQ_GPIO(0);
-
-	switch (irq) {
-	case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
-		return 0;
-	case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
-		return 1;
-	case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
-		return 2;
-	case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
-		return 3;
-	case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
-		return 4;
-	case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
-		return 5;
-	case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
-		return 6;
-	case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
-		return 7;
-	case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
-		return 8;
-	case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
-		return 9;
-	case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
-		return 10;
-	case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
-		return 11;
-	case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
-		return 12;
-	case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
-		return 13;
-	case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
-		return 14;
-	case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
-		return 15;
-	case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
-		return 16;
-	case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
-		return 17;
-	case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
-		return 18;
-	case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
-		return 19;
-	case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
-		return 20;
-	default:
-		BUG();
-	}
-
-	return -EINVAL;
-}
-
-static int s5pc1xx_get_offset(unsigned int irq)
-{
-	struct gpio_chip *chip = get_irq_data(irq);
-	return irq - S3C_IRQ_GPIO(chip->base);
-}
-
-static void s5pc1xx_gpioint_ack(unsigned int irq)
-{
-	int group, offset, pend_offset;
-	unsigned int value;
-
-	group = s5pc1xx_get_group(irq);
-	offset = s5pc1xx_get_offset(irq);
-	pend_offset = group_to_pend_offset(group);
-
-	value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
-	value |= 1 << offset;
-	__raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
-}
-
-static void s5pc1xx_gpioint_mask(unsigned int irq)
-{
-	int group, offset, mask_offset;
-	unsigned int value;
-
-	group = s5pc1xx_get_group(irq);
-	offset = s5pc1xx_get_offset(irq);
-	mask_offset = group_to_mask_offset(group);
-
-	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
-	value |= 1 << offset;
-	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
-}
-
-static void s5pc1xx_gpioint_unmask(unsigned int irq)
-{
-	int group, offset, mask_offset;
-	unsigned int value;
-
-	group = s5pc1xx_get_group(irq);
-	offset = s5pc1xx_get_offset(irq);
-	mask_offset = group_to_mask_offset(group);
-
-	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
-	value &= ~(1 << offset);
-	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
-}
-
-static void s5pc1xx_gpioint_mask_ack(unsigned int irq)
-{
-	s5pc1xx_gpioint_mask(irq);
-	s5pc1xx_gpioint_ack(irq);
-}
-
-static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type)
-{
-	int group, offset, con_offset;
-	unsigned int value;
-
-	group = s5pc1xx_get_group(irq);
-	offset = s5pc1xx_get_offset(irq);
-	con_offset = group_to_con_offset(group);
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No irq type\n");
-		return -EINVAL;
-	case IRQ_TYPE_EDGE_RISING:
-		type = GPIOINT_EDGE_RISING;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		type = GPIOINT_EDGE_FALLING;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		type = GPIOINT_EDGE_BOTH;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		type = GPIOINT_LEVEL_HIGH;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		type = GPIOINT_LEVEL_LOW;
-		break;
-	default:
-		BUG();
-	}
-
-
-	value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
-	value &= ~(0xf << (offset * 0x4));
-	value |= (type << (offset * 0x4));
-	__raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
-
-	return 0;
-}
-
-struct irq_chip s5pc1xx_gpioint = {
-	.name		= "GPIO",
-	.ack		= s5pc1xx_gpioint_ack,
-	.mask		= s5pc1xx_gpioint_mask,
-	.mask_ack	= s5pc1xx_gpioint_mask_ack,
-	.unmask		= s5pc1xx_gpioint_unmask,
-	.set_type	= s5pc1xx_gpioint_set_type,
-};
-
-void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int group, offset, pend_offset, mask_offset;
-	int real_irq, group_end;
-	unsigned int pend, mask;
-
-	group_end = 21;
-
-	for (group = 0; group < group_end; group++) {
-		pend_offset = group_to_pend_offset(group);
-		pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
-		if (!pend)
-			continue;
-
-		mask_offset = group_to_mask_offset(group);
-		mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
-		pend &= ~mask;
-
-		for (offset = 0; offset < 8; offset++) {
-			if (pend & (1 << offset)) {
-				real_irq = s5pc1xx_get_start(group) + offset;
-				generic_handle_irq(S3C_IRQ_GPIO(real_irq));
-			}
-		}
-	}
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/Kconfig linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/Kconfig	1969-12-31 19:00:00.000000000 -0500
@@ -1,65 +0,0 @@
-# Copyright 2009 Samsung Electronics Co.
-#	Byungho Min <bhmin@samsung.com>
-#
-# Licensed under GPLv2
-
-config PLAT_S5PC1XX
-	bool
-	depends on ARCH_S5PC1XX
-	default y
-	select PLAT_S3C
-	select ARM_VIC
-	select NO_IOPORT
-	select ARCH_REQUIRE_GPIOLIB
-	select SAMSUNG_CLKSRC
-	select SAMSUNG_IRQ_UART
-	select SAMSUNG_IRQ_VIC_TIMER
-	select S3C_GPIO_TRACK
-	select S3C_GPIO_PULL_UPDOWN
-	select S3C_GPIO_CFG_S3C24XX
-	select S3C_GPIO_CFG_S3C64XX
-	select S5P_GPIO_CFG_S5PC1XX
-	help
-	  Base platform code for any Samsung S5PC1XX device
-
-if PLAT_S5PC1XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S5PC100_INIT
-	bool
-	help
-	  Common initialisation code for the S5PC1XX
-
-config CPU_S5PC100_CLOCK
-	bool
-	help
-	  Common clock support code for the S5PC1XX
-
-# platform specific device setup
-
-config S5PC1XX_SETUP_FB_24BPP
-	bool
-	help
-          Common setup code for S5PC1XX with an 24bpp RGB display helper.
-
-config S5PC1XX_SETUP_I2C0
-	bool
-	default y
-	help
-	  Common setup code for i2c bus 0.
-
-	  Note, currently since i2c0 is always compiled, this setup helper
-	  is always compiled with it.
-
-config S5PC1XX_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config S5PC1XX_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/Makefile linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/Makefile	1969-12-31 19:00:00.000000000 -0500
@@ -1,31 +0,0 @@
-# arch/arm/plat-s5pc1xx/Makefile
-#
-# Copyright 2009 Samsung Electronics Co.
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:= dummy.o
-obj-				:=
-
-# Core files
-
-obj-y				+= dev-uart.o
-obj-y				+= cpu.o
-obj-y				+= irq.o irq-gpio.o irq-eint.o
-obj-y				+= clock.o
-obj-y				+= gpiolib.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S5PC100_INIT)	+= s5pc100-init.o
-obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
-
-# Device setup
-
-obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
-obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/s5pc100-clock.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/s5pc100-clock.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/s5pc100-clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/s5pc100-clock.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,876 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
- *
- * Copyright 2009 Samsung Electronics, Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 based common clock support
- *
- * Based on plat-s3c64xx/s3c6400-clock.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/sysdev.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/regs-clock.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
- * ext_xtal_mux for want of an actual name from the manual.
-*/
-
-static struct clk clk_ext_xtal_mux = {
-	.name		= "ext_xtal",
-	.id		= -1,
-};
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-#define clk_fout_mpll	clk_mpll
-#define clk_vclk_54m	clk_54m
-
-/* APLL */
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
-
-static struct clksrc_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
-};
-
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_apll,
-	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 0, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
-	ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll = {
-	.name		= "dout_apll",
-	.id		= -1,
-	.parent		= &clk_mout_apll.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_apll_get_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
-	ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-
-	if (parent < rate)
-		return rate;
-
-	div = (parent / rate) - 1;
-	if (div > S5PC100_CLKDIV0_ARM_MASK)
-		div = S5PC100_CLKDIV0_ARM_MASK;
-
-	return parent / (div + 1);
-}
-
-static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	u32 div;
-	u32 val;
-
-	if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
-		return -EINVAL;
-
-	rate = clk_round_rate(clk, rate);
-	div = clk_get_rate(clk->parent) / rate;
-
-	val = __raw_readl(S5PC100_CLKDIV0);
-	val &= S5PC100_CLKDIV0_ARM_MASK;
-	val |= (div - 1);
-	__raw_writel(val, S5PC100_CLKDIV0);
-
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.parent		= &clk_dout_apll,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_arm_get_rate,
-		.set_rate	= s5pc100_clk_arm_set_rate,
-		.round_rate	= s5pc100_clk_arm_round_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
-	ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d0_bus = {
-	.name		= "dout_d0_bus",
-	.id		= -1,
-	.parent		= &clk_arm,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_d0_bus_get_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
-	ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd0 = {
-	.name		= "dout_pclkd0",
-	.id		= -1,
-	.parent		= &clk_dout_d0_bus,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_pclkd0_get_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
-	ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_apll2 = {
-	.name		= "dout_apll2",
-	.id		= -1,
-	.parent		= &clk_mout_apll.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_apll2_get_rate,
-	},
-};
-
-/* MPLL */
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clksrc_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-		.id		= -1,
-	},
-	.sources	= &clk_src_mpll,
-	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 4, .size = 1, },
-};
-
-static struct clk *clkset_am_list[] = {
-	[0] = &clk_mout_mpll.clk,
-	[1] = &clk_dout_apll2,
-};
-
-static struct clksrc_sources clk_src_am = {
-	.sources	= clkset_am_list,
-	.nr_sources	= ARRAY_SIZE(clkset_am_list),
-};
-
-static struct clksrc_clk clk_mout_am = {
-	.clk = {
-		.name		= "mout_am",
-		.id		= -1,
-	},
-	.sources	= &clk_src_am,
-	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 16, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
-	ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_d1_bus = {
-	.name		= "dout_d1_bus",
-	.id		= -1,
-	.parent		= &clk_mout_am.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_d1_bus_get_rate,
-	},
-};
-
-static struct clk *clkset_onenand_list[] = {
-	[0] = &clk_dout_d0_bus,
-	[1] = &clk_dout_d1_bus,
-};
-
-static struct clksrc_sources clk_src_onenand = {
-	.sources	= clkset_onenand_list,
-	.nr_sources	= ARRAY_SIZE(clkset_onenand_list),
-};
-
-static struct clksrc_clk clk_mout_onenand = {
-	.clk = {
-		.name		= "mout_onenand",
-		.id		= -1,
-	},
-	.sources	= &clk_src_onenand,
-	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 24, .size = 1, },
-};
-
-static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
-	ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_pclkd1 = {
-	.name		= "dout_pclkd1",
-	.id		= -1,
-	.parent		= &clk_dout_d1_bus,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_pclkd1_get_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
-	ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll2 = {
-	.name		= "dout_mpll2",
-	.id		= -1,
-	.parent		= &clk_mout_am.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_mpll2_get_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
-	ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_cam = {
-	.name		= "dout_cam",
-	.id		= -1,
-	.parent		= &clk_dout_mpll2,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_cam_get_rate,
-	},
-};
-
-static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned int ratio;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
-	ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
-
-	return rate / (ratio + 1);
-}
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.id		= -1,
-	.parent		= &clk_mout_am.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s5pc100_clk_dout_mpll_get_rate,
-	},
-};
-
-/* EPLL */
-static struct clk clk_fout_epll = {
-	.name		= "fout_epll",
-	.id		= -1,
-};
-
-static struct clk *clk_src_epll_list[] = {
-	[0] = &clk_fin_epll,
-	[1] = &clk_fout_epll,
-};
-
-static struct clksrc_sources clk_src_epll = {
-	.sources	= clk_src_epll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
-};
-
-static struct clksrc_clk clk_mout_epll = {
-	.clk	= {
-		.name		= "mout_epll",
-		.id		= -1,
-	},
-	.sources = &clk_src_epll,
-	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 8, .size = 1, },
-};
-
-/* HPLL */
-static struct clk clk_fout_hpll = {
-	.name		= "fout_hpll",
-	.id		= -1,
-};
-
-static struct clk *clk_src_hpll_list[] = {
-	[0] = &clk_27m,
-	[1] = &clk_fout_hpll,
-};
-
-static struct clksrc_sources clk_src_hpll = {
-	.sources	= clk_src_hpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_hpll_list),
-};
-
-static struct clksrc_clk clk_mout_hpll = {
-	.clk	= {
-		.name		= "mout_hpll",
-		.id		= -1,
-	},
-	.sources = &clk_src_hpll,
-	.reg_src = { .reg = S5PC100_CLKSRC0, .shift = 12, .size = 1, },
-};
-
-/* Peripherals */
-/*
- * The peripheral clocks are all controlled via clocksource followed
- * by an optional divider and gate stage. We currently roll this into
- * one clock which hides the intermediate clock from the mux.
- *
- * Note, the JPEG clock can only be an even divider...
- *
- * The scaler and LCD clocks depend on the S5PC100 version, and also
- * have a common parent divisor so are not included here.
- */
-
-static struct clk clk_iis_cd0 = {
-	.name		= "iis_cdclk0",
-	.id		= -1,
-};
-
-static struct clk clk_iis_cd1 = {
-	.name		= "iis_cdclk1",
-	.id		= -1,
-};
-
-static struct clk clk_iis_cd2 = {
-	.name		= "iis_cdclk2",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd0 = {
-	.name		= "pcm_cdclk0",
-	.id		= -1,
-};
-
-static struct clk clk_pcm_cd1 = {
-	.name		= "pcm_cdclk1",
-	.id		= -1,
-};
-
-static struct clk *clkset_audio0_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_iis_cd0,
-	&clk_pcm_cd0,
-	&clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio0 = {
-	.sources	= clkset_audio0_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
-};
-
-static struct clk *clkset_spi_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll2,
-	&clk_fin_epll,
-	&clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_spi = {
-	.sources	= clkset_spi_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spi_list),
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-};
-
-static struct clksrc_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
-
-static struct clk *clkset_audio1_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_iis_cd1,
-	&clk_pcm_cd1,
-	&clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio1 = {
-	.sources	= clkset_audio1_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
-};
-
-static struct clk *clkset_audio2_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_iis_cd2,
-	&clk_mout_hpll.clk,
-};
-
-static struct clksrc_sources clkset_audio2 = {
-	.sources	= clkset_audio2_list,
-	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
-};
-
-static struct clksrc_clk clksrc_audio[] = {
-	{
-		.clk	= {
-			.name		= "audio-bus",
-			.id		= 0,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO0,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources = &clkset_audio0,
-		.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 12, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 12, .size = 3, },
-	}, {
-		.clk	= {
-			.name		= "audio-bus",
-			.id		= 1,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO1,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources = &clkset_audio1,
-		.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 16, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 16, .size = 3, },
-	}, {
-		.clk	= {
-			.name		= "audio-bus",
-			.id		= 2,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO2,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources = &clkset_audio2,
-		.reg_div = { .reg = S5PC100_CLKDIV4, .shift = 20, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 20, .size = 3, },
-	},
-};
-
-static struct clk *clkset_spdif_list[] = {
-	&clksrc_audio[0].clk,
-	&clksrc_audio[1].clk,
-	&clksrc_audio[2].clk,
-};
-
-static struct clksrc_sources clkset_spdif = {
-	.sources	= clkset_spdif_list,
-	.nr_sources	= ARRAY_SIZE(clkset_spdif_list),
-};
-
-static struct clk *clkset_lcd_fimc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_mout_hpll.clk,
-	&clk_vclk_54m,
-};
-
-static struct clksrc_sources clkset_lcd_fimc = {
-	.sources	= clkset_lcd_fimc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_lcd_fimc_list),
-};
-
-static struct clk *clkset_mmc_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_fin_epll,
-	&clk_mout_hpll.clk ,
-};
-
-static struct clksrc_sources clkset_mmc = {
-	.sources	= clkset_mmc_list,
-	.nr_sources	= ARRAY_SIZE(clkset_mmc_list),
-};
-
-static struct clk *clkset_usbhost_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	&clk_mout_hpll.clk,
-	&clk_48m,
-};
-
-static struct clksrc_sources clkset_usbhost = {
-	.sources	= clkset_usbhost_list,
-	.nr_sources	= ARRAY_SIZE(clkset_usbhost_list),
-};
-
-static struct clksrc_clk clksrc_clks[] = {
-	{
-		.clk	= {
-			.name		= "spi_bus",
-			.id		= 0,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0,
-			.enable		= s5pc100_sclk0_ctrl,
-
-		},
-		.sources = &clkset_spi,
-		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 4, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 4, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "spi_bus",
-			.id		= 1,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources = &clkset_spi,
-		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 8, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 8, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "spi_bus",
-			.id		= 2,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources = &clkset_spi,
-		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 12, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 12, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "uclk1",
-			.id		= -1,
-			.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources = &clkset_uart,
-		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 0, .size = 3, },
-		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 0, .size = 1, },
-	}, {
-		.clk	= {
-			.name		= "spdif",
-			.id		= -1,
-		},
-		.sources	= &clkset_spdif,
-		.reg_src = { .reg = S5PC100_CLKSRC3, .shift = 24, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "lcd",
-			.id		= -1,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_LCD,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources = &clkset_lcd_fimc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 12, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 12, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "fimc",
-			.id		= 0,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC0,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources = &clkset_lcd_fimc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 16, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 16, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "fimc",
-			.id		= 1,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC1,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources	= &clkset_lcd_fimc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 20, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 20, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "fimc",
-			.id		= 2,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC2,
-			.enable		= s5pc100_sclk1_ctrl,
-		},
-		.sources = &clkset_lcd_fimc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 24, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 24, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 0,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources = &clkset_mmc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 0, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 0, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 1,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources = &clkset_mmc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 4, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 4, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "mmc_bus",
-			.id		= 2,
-			.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources	= &clkset_mmc,
-		.reg_div = { .reg = S5PC100_CLKDIV3, .shift = 8, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC2, .shift = 8, .size = 2, },
-	}, {
-		.clk	= {
-			.name		= "usbhost",
-			.id		= -1,
-			.ctrlbit        = S5PC100_CLKGATE_SCLK0_USBHOST,
-			.enable		= s5pc100_sclk0_ctrl,
-		},
-		.sources = &clkset_usbhost,
-		.reg_div = { .reg = S5PC100_CLKDIV2, .shift = 20, .size = 4, },
-		.reg_src = { .reg = S5PC100_CLKSRC1, .shift = 20, .size = 2, },
-	}
-};
-
-/* Clock initialisation code */
-
-static struct clksrc_clk *init_parents[] = {
-	&clk_mout_apll,
-	&clk_mout_mpll,
-	&clk_mout_am,
-	&clk_mout_onenand,
-	&clk_mout_epll,
-	&clk_mout_hpll,
-};
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-void __init_or_cpufreq s5pc100_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long armclk;
-	unsigned long hclkd0;
-	unsigned long hclk;
-	unsigned long pclkd0;
-	unsigned long pclk;
-	unsigned long apll, mpll, epll, hpll;
-	unsigned int ptr;
-	u32 clkdiv0, clkdiv1;
-
-	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
-	clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
-	clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
-
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
-
-	xtal_clk = clk_get(NULL, "xtal");
-	BUG_ON(IS_ERR(xtal_clk));
-
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
-	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
-	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
-	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
-	hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
-
-	printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
-		", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
-		print_mhz(apll), print_mhz(mpll),
-		print_mhz(epll), print_mhz(hpll));
-
-	armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
-	armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
-	hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
-	pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
-	hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
-	pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
-
-	printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
-		" PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
-		" PCLK=%ld.%03ld MHz\n",
-		print_mhz(armclk), print_mhz(hclkd0),
-		print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
-
-	clk_fout_apll.rate = apll;
-	clk_fout_mpll.rate = mpll;
-	clk_fout_epll.rate = epll;
-	clk_fout_hpll.rate = hpll;
-
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = armclk;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s3c_set_clksrc(init_parents[ptr], true);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_audio); ptr++)
-		s3c_set_clksrc(clksrc_audio + ptr, true);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
-		s3c_set_clksrc(clksrc_clks + ptr, true);
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_ext_xtal_mux,
-	&clk_dout_apll,
-	&clk_dout_d0_bus,
-	&clk_dout_pclkd0,
-	&clk_dout_apll2,
-	&clk_mout_apll.clk,
-	&clk_mout_mpll.clk,
-	&clk_mout_epll.clk,
-	&clk_mout_hpll.clk,
-	&clk_mout_am.clk,
-	&clk_dout_d1_bus,
-	&clk_mout_onenand.clk,
-	&clk_dout_pclkd1,
-	&clk_dout_mpll2,
-	&clk_dout_cam,
-	&clk_dout_mpll,
-	&clk_fout_epll,
-	&clk_iis_cd0,
-	&clk_iis_cd1,
-	&clk_iis_cd2,
-	&clk_pcm_cd0,
-	&clk_pcm_cd1,
-	&clk_arm,
-};
-
-void __init s5pc100_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	s3c_register_clksrc(clksrc_audio, ARRAY_SIZE(clksrc_audio));
-	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/s5pc100-init.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/s5pc100-init.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/s5pc100-init.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/s5pc100-init.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,27 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s5pc100.h>
-
-/* uart registration process */
-
-void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	/* The driver name is s3c6400-uart to reuse s3c6400_serial_drv  */
-	s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,49 +0,0 @@
-/*
- * linux/arch/arm/plat-s5pc100/setup-fb-24bpp.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * Base S5PC1XX setup information for 24bpp LCD framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <mach/regs-fb.h>
-#include <mach/map.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
-
-#define DISR_OFFSET	0x7008
-
-void s5pc100_fb_gpio_setup_24bpp(void)
-{
-	unsigned int gpio = 0;
-
-	for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/setup-i2c0.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/setup-i2c0.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/setup-i2c0.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/setup-i2c0.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,30 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC1XX I2C bus 0 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/setup-i2c1.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/setup-i2c1.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/setup-i2c1.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/setup-i2c1.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,30 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
- *
- * Copyright 2009 Samsung Electronics Co.
- *	Byungho Min <bhmin@samsung.com>
- *
- * Base S5PC1XX I2C bus 1 gpio configuration
- *
- * Based on plat-s3c64xx/setup-i2c1.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <plat/iic.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
-	s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,86 +0,0 @@
-/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
- *
- * Copyright 2009 Samsung Eletronics
- *
- * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-
-#include <plat/gpio-cfg.h>
-#include <plat/regs-sdhci.h>
-
-void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-	unsigned int num;
-
-	num = width;
-	/* In case of 8 width, we should decrease the 2 */
-	if (width == 8)
-		num = width - 2;
-
-	end = S5PC100_GPG0(2 + num);
-
-	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
-	for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	if (width == 8) {
-		for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		}
-	}
-
-	s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
-}
-
-void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S5PC100_GPG2(2 + width);
-
-	/* Set all the necessary GPG2 pins to special-function 2 */
-	for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
-}
-
-void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S5PC100_GPG3(2 + width);
-
-	/* Set all the necessary GPG3 pins to special-function 2 */
-	for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
-}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/adc.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/adc.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/adc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/adc.c	2010-08-01 18:11:14.000000000 -0400
@@ -66,6 +66,7 @@
 	struct s3c_adc_client	*cur;
 	struct s3c_adc_client	*ts_pend;
 	void __iomem		*regs;
+	spinlock_t		 lock;
 
 	unsigned int		 prescale;
 
@@ -74,7 +75,7 @@
 
 static struct adc_device *adc_dev;
 
-static LIST_HEAD(adc_pending);
+static LIST_HEAD(adc_pending);	/* protected by adc_device.lock */
 
 #define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
 
@@ -145,7 +146,7 @@
 	if (client->is_ts && adc->ts_pend)
 		return -EAGAIN;
 
-	local_irq_save(flags);
+	spin_lock_irqsave(&adc->lock, flags);
 
 	client->channel = channel;
 	client->nr_samples = nr_samples;
@@ -157,7 +158,8 @@
 
 	if (!adc->cur)
 		s3c_adc_try(adc);
-	local_irq_restore(flags);
+
+	spin_unlock_irqrestore(&adc->lock, flags);
 
 	return 0;
 }
@@ -237,6 +239,10 @@
 
 void s3c_adc_release(struct s3c_adc_client *client)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(&adc_dev->lock, flags);
+
 	/* We should really check that nothing is in progress. */
 	if (adc_dev->cur == client)
 		adc_dev->cur = NULL;
@@ -255,6 +261,8 @@
 
 	if (adc_dev->cur == NULL)
 		s3c_adc_try(adc_dev);
+
+	spin_unlock_irqrestore(&adc_dev->lock, flags);
 	kfree(client);
 }
 EXPORT_SYMBOL_GPL(s3c_adc_release);
@@ -264,7 +272,6 @@
 	struct adc_device *adc = pw;
 	struct s3c_adc_client *client = adc->cur;
 	enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
-	unsigned long flags;
 	unsigned data0, data1;
 
 	if (!client) {
@@ -296,12 +303,12 @@
 		client->select_cb(client, 1);
 		s3c_adc_convert(adc);
 	} else {
-		local_irq_save(flags);
+		spin_lock(&adc->lock);
 		(client->select_cb)(client, 0);
 		adc->cur = NULL;
 
 		s3c_adc_try(adc);
-		local_irq_restore(flags);
+		spin_unlock(&adc->lock);
 	}
 
 exit:
@@ -326,6 +333,8 @@
 		return -ENOMEM;
 	}
 
+	spin_lock_init(&adc->lock);
+
 	adc->pdev = pdev;
 	adc->prescale = S3C2410_ADCCON_PRSCVL(49);
 
@@ -407,13 +416,17 @@
 static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct adc_device *adc = platform_get_drvdata(pdev);
+	unsigned long flags;
 	u32 con;
 
+	spin_lock_irqsave(&adc->lock, flags);
+
 	con = readl(adc->regs + S3C2410_ADCCON);
 	con |= S3C2410_ADCCON_STDBM;
 	writel(con, adc->regs + S3C2410_ADCCON);
 
 	disable_irq(adc->irq);
+	spin_unlock_irqrestore(&adc->lock, flags);
 	clk_disable(adc->clk);
 
 	return 0;
@@ -422,6 +435,7 @@
 static int s3c_adc_resume(struct platform_device *pdev)
 {
 	struct adc_device *adc = platform_get_drvdata(pdev);
+	unsigned long flags;
 
 	clk_enable(adc->clk);
 	enable_irq(adc->irq);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/clock.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/clock.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -376,6 +376,21 @@
 	}
 }
 
+/**
+ * s3c_disable_clocks() - disable an array of clocks
+ * @clkp: Pointer to the first clock in the array.
+ * @nr_clks: Number of clocks to register.
+ *
+ * for internal use only at initialisation time. disable the clocks in the
+ * @clkp array.
+ */
+
+void __init s3c_disable_clocks(struct clk *clkp, int nr_clks)
+{
+	for (; nr_clks > 0; nr_clks--, clkp++)
+		(clkp->enable)(clkp, 0);
+}
+
 /* initalise all the clocks */
 
 int __init s3c24xx_register_baseclocks(unsigned long xtal)
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-adc.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-adc.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-adc.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-adc.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,46 @@
+/* linux/arch/arm/plat-samsung/dev-adc.c
+ *
+ * Copyright 2010 Maurus Cuelenaere
+ *
+ * S3C64xx series device definition for ADC device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/adc.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_adc_resource[] = {
+	[0] = {
+		.start = SAMSUNG_PA_ADC,
+		.end   = SAMSUNG_PA_ADC + SZ_256 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TC,
+		.end   = IRQ_TC,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_adc = {
+	.name		= "samsung-adc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
+	.resource	= s3c_adc_resource,
+};
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-fb.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-fb.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-fb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-fb.c	2010-08-01 18:11:14.000000000 -0400
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
-#include <mach/regs-fb.h>
 
 #include <plat/fb.h>
 #include <plat/devs.h>
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-hwmon.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-hwmon.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-hwmon.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-hwmon.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,42 @@
+/* linux/arch/arm/plat-samsung/dev-hwmon.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Adapted for HWMON by Maurus Cuelenaere
+ *
+ * Samsung series device definition for HWMON
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+#include <plat/hwmon.h>
+
+struct platform_device s3c_device_hwmon = {
+	.name		= "s3c-hwmon",
+	.id		= -1,
+	.dev.parent	= &s3c_device_adc.dev,
+};
+
+void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
+{
+	struct s3c_hwmon_pdata *npd;
+
+	if (!pd) {
+		printk(KERN_ERR "%s: no platform data\n", __func__);
+		return;
+	}
+
+	npd = kmemdup(pd, sizeof(struct s3c_hwmon_pdata), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+	s3c_device_hwmon.dev.platform_data = npd;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-i2c2.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-i2c2.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-i2c2.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-i2c2.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s3c/dev-i2c2.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S3C series device definition for i2c device 2
+ *
+ * Based on plat-samsung/dev-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+static struct resource s3c_i2c_resource[] = {
+	[0] = {
+		.start = S3C_PA_IIC2,
+		.end   = S3C_PA_IIC2 + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CAN0,
+		.end   = IRQ_CAN0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_i2c2 = {
+	.name		  = "s3c2410-i2c",
+	.id		  = 2,
+	.num_resources	  = ARRAY_SIZE(s3c_i2c_resource),
+	.resource	  = s3c_i2c_resource,
+};
+
+static struct s3c2410_platform_i2c default_i2c_data2 __initdata = {
+	.flags		= 0,
+	.bus_num	= 2,
+	.slave_addr	= 0x10,
+	.frequency	= 100*1000,
+	.sda_delay	= 100,
+};
+
+void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+	struct s3c2410_platform_i2c *npd;
+
+	if (!pd)
+		pd = &default_i2c_data2;
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	else if (!npd->cfg_gpio)
+		npd->cfg_gpio = s3c_i2c2_cfg_gpio;
+
+	s3c_device_i2c2.dev.platform_data = npd;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-onenand.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-onenand.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-onenand.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-onenand.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,55 @@
+/*
+ * linux/arch/arm/plat-samsung/dev-onenand.c
+ *
+ *  Copyright (c) 2008-2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S3C64XX/S5PC100 series device definition for OneNAND devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+static struct resource s3c_onenand_resources[] = {
+	[0] = {
+		.start	= S3C_PA_ONENAND,
+		.end	= S3C_PA_ONENAND + 0x400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= S3C_PA_ONENAND_BUF,
+		.end	= S3C_PA_ONENAND_BUF + S3C_SZ_ONENAND_BUF - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_ONENAND,
+		.end	= IRQ_ONENAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_onenand = {
+	.name		= "samsung-onenand",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c_onenand_resources),
+	.resource	= s3c_onenand_resources,
+};
+
+void s3c_onenand_set_platdata(struct onenand_platform_data *pdata)
+{
+	struct onenand_platform_data *pd;
+
+	pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
+	if (!pd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+	s3c_device_onenand.dev.platform_data = pd;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-rtc.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-rtc.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-rtc.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-rtc.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,43 @@
+/* linux/arch/arm/plat-samsung/dev-rtc.c
+ *
+ * Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_rtc_resource[] = {
+	[0] = {
+		.start	= S3C_PA_RTC,
+		.end	= S3C_PA_RTC + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_RTC_ALARM,
+		.end	= IRQ_RTC_ALARM,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_RTC_TIC,
+		.end	= IRQ_RTC_TIC,
+		.flags	= IORESOURCE_IRQ
+	}
+};
+
+struct platform_device s3c_device_rtc = {
+	.name		= "s3c64xx-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_rtc_resource),
+	.resource	= s3c_rtc_resource,
+};
+EXPORT_SYMBOL(s3c_device_rtc);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-ts.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-ts.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-ts.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-ts.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,61 @@
+/* linux/arch/arm/mach-s3c64xx/dev-ts.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * Adapted by Maurus Cuelenaere for s3c64xx
+ *
+ * S3C64XX series device definition for touchscreen device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/ts.h>
+
+static struct resource s3c_ts_resource[] = {
+	[0] = {
+		.start = SAMSUNG_PA_ADC,
+		.end   = SAMSUNG_PA_ADC + SZ_256 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TC,
+		.end   = IRQ_TC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s3c_device_ts = {
+	.name		= "s3c64xx-ts",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
+	.resource	= s3c_ts_resource,
+};
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+{
+	struct s3c2410_ts_mach_info *npd;
+
+	if (!pd) {
+		printk(KERN_ERR "%s: no platform data\n", __func__);
+		return;
+	}
+
+	npd = kmemdup(pd, sizeof(struct s3c2410_ts_mach_info), GFP_KERNEL);
+	if (!npd)
+		printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+	s3c_device_ts.dev.platform_data = npd;
+}
+EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-wdt.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-wdt.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/dev-wdt.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/dev-wdt.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,40 @@
+/* linux/arch/arm/plat-samsung/dev-wdt.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C series device definition for the watchdog timer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_wdt_resource[] = {
+	[0] = {
+		.start	= S3C_PA_WDT,
+		.end	= S3C_PA_WDT + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_WDT,
+		.end	= IRQ_WDT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device s3c_device_wdt = {
+	.name		= "s3c2410-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s3c_wdt_resource),
+	.resource	= s3c_wdt_resource,
+};
+EXPORT_SYMBOL(s3c_device_wdt);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/gpio.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/spinlock.h>
 
 #include <plat/gpio-core.h>
 
@@ -52,14 +53,14 @@
 	unsigned long flags;
 	unsigned long con;
 
-	local_irq_save(flags);
+	s3c_gpio_lock(ourchip, flags);
 
 	con = __raw_readl(base + 0x00);
 	con &= ~(3 << (offset * 2));
 
 	__raw_writel(con, base + 0x00);
 
-	local_irq_restore(flags);
+	s3c_gpio_unlock(ourchip, flags);
 	return 0;
 }
 
@@ -72,7 +73,7 @@
 	unsigned long dat;
 	unsigned long con;
 
-	local_irq_save(flags);
+	s3c_gpio_lock(ourchip, flags);
 
 	dat = __raw_readl(base + 0x04);
 	dat &= ~(1 << offset);
@@ -87,7 +88,7 @@
 	__raw_writel(con, base + 0x00);
 	__raw_writel(dat, base + 0x04);
 
-	local_irq_restore(flags);
+	s3c_gpio_unlock(ourchip, flags);
 	return 0;
 }
 
@@ -99,7 +100,7 @@
 	unsigned long flags;
 	unsigned long dat;
 
-	local_irq_save(flags);
+	s3c_gpio_lock(ourchip, flags);
 
 	dat = __raw_readl(base + 0x04);
 	dat &= ~(1 << offset);
@@ -107,7 +108,7 @@
 		dat |= 1 << offset;
 	__raw_writel(dat, base + 0x04);
 
-	local_irq_restore(flags);
+	s3c_gpio_unlock(ourchip, flags);
 }
 
 static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
@@ -131,6 +132,8 @@
 	BUG_ON(!gc->label);
 	BUG_ON(!gc->ngpio);
 
+	spin_lock_init(&chip->lock);
+
 	if (!gc->direction_input)
 		gc->direction_input = s3c_gpiolib_input;
 	if (!gc->direction_output)
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/gpio-config.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/gpio-config.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/gpio-config.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/gpio-config.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s3c/gpio-config.c
  *
  * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
+ * Copyright 2008-2010 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
@@ -33,14 +33,34 @@
 
 	offset = pin - chip->chip.base;
 
-	local_irq_save(flags);
+	s3c_gpio_lock(chip, flags);
 	ret = s3c_gpio_do_setcfg(chip, offset, config);
-	local_irq_restore(flags);
+	s3c_gpio_unlock(chip, flags);
 
 	return ret;
 }
 EXPORT_SYMBOL(s3c_gpio_cfgpin);
 
+unsigned s3c_gpio_getcfg(unsigned int pin)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned long flags;
+	unsigned ret = 0;
+	int offset;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		s3c_gpio_lock(chip, flags);
+		ret = s3c_gpio_do_getcfg(chip, offset);
+		s3c_gpio_unlock(chip, flags);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_getcfg);
+
+
 int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
 {
 	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
@@ -52,17 +72,17 @@
 
 	offset = pin - chip->chip.base;
 
-	local_irq_save(flags);
+	s3c_gpio_lock(chip, flags);
 	ret = s3c_gpio_do_setpull(chip, offset, pull);
-	local_irq_restore(flags);
+	s3c_gpio_unlock(chip, flags);
 
 	return ret;
 }
 EXPORT_SYMBOL(s3c_gpio_setpull);
 
 #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
-int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
-				  unsigned int off, unsigned int cfg)
+int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
+			      unsigned int off, unsigned int cfg)
 {
 	void __iomem *reg = chip->base;
 	unsigned int shift = off;
@@ -87,6 +107,19 @@
 	return 0;
 }
 
+unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
+				   unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off;
+	con &= 1;
+	con++;
+
+	return S3C_GPIO_SFN(con);
+}
+
 int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip,
 			    unsigned int off, unsigned int cfg)
 {
@@ -109,6 +142,19 @@
 
 	return 0;
 }
+
+unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
+				     unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off * 2;
+	con &= 3;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
 #endif
 
 #ifdef CONFIG_S3C_GPIO_CFG_S3C64XX
@@ -134,6 +180,25 @@
 
 	return 0;
 }
+
+unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+				      unsigned int off)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	con = __raw_readl(reg);
+	con >>= shift;
+	con &= 0xf;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
 #endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */
 
 #ifdef CONFIG_S3C_GPIO_PULL_UPDOWN
@@ -164,3 +229,83 @@
 	return (__force s3c_gpio_pull_t)pup;
 }
 #endif
+
+#ifdef CONFIG_S3C_GPIO_PULL_UP
+int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+			 unsigned int off, s3c_gpio_pull_t pull)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	pup = __raw_readl(reg);
+
+	if (pup == S3C_GPIO_PULL_UP)
+		pup &= ~(1 << off);
+	else if (pup == S3C_GPIO_PULL_NONE)
+		pup |= (1 << off);
+	else
+		return -EINVAL;
+
+	__raw_writel(pup, reg);
+	return 0;
+}
+
+s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
+				     unsigned int off)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	pup &= (1 << off);
+	return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP;
+}
+#endif /* CONFIG_S3C_GPIO_PULL_UP */
+
+#ifdef CONFIG_S5P_GPIO_DRVSTR
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned int off;
+	void __iomem *reg;
+	int shift;
+	u32 drvstr;
+
+	if (!chip)
+		return -EINVAL;
+
+	off = chip->chip.base - pin;
+	shift = off * 2;
+	reg = chip->base + 0x0C;
+
+	drvstr = __raw_readl(reg);
+	drvstr = 0xffff & (0x3 << shift);
+	drvstr = drvstr >> shift;
+
+	return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	unsigned int off;
+	void __iomem *reg;
+	int shift;
+	u32 tmp;
+
+	if (!chip)
+		return -EINVAL;
+
+	off = chip->chip.base - pin;
+	shift = off * 2;
+	reg = chip->base + 0x0C;
+
+	tmp = __raw_readl(reg);
+	tmp |= drvstr << shift;
+
+	__raw_writel(tmp, reg);
+
+	return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+#endif	/* CONFIG_S5P_GPIO_DRVSTR */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/clock.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/clock.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/clock.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -74,6 +74,7 @@
 extern struct clk clk_h2;
 extern struct clk clk_27m;
 extern struct clk clk_48m;
+extern struct clk clk_xusbxti;
 
 extern int clk_default_setrate(struct clk *clk, unsigned long rate);
 extern struct clk_ops clk_ops_def_setrate;
@@ -91,6 +92,7 @@
 extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
 
 extern void s3c_register_clocks(struct clk *clk, int nr_clks);
+extern void s3c_disable_clocks(struct clk *clkp, int nr_clks);
 
 extern int s3c24xx_register_baseclocks(unsigned long xtal);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/cpu.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/cpu.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/cpu.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/cpu.h	2010-08-01 18:11:14.000000000 -0400
@@ -73,11 +73,15 @@
 extern struct sysdev_class s3c2410_sysclass;
 extern struct sysdev_class s3c2410a_sysclass;
 extern struct sysdev_class s3c2412_sysclass;
+extern struct sysdev_class s3c2416_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
 extern struct sysdev_class s3c2443_sysclass;
 extern struct sysdev_class s3c6410_sysclass;
 extern struct sysdev_class s3c64xx_sysclass;
+extern struct sysdev_class s5p6440_sysclass;
+extern struct sysdev_class s5p6442_sysclass;
+extern struct sysdev_class s5pv210_sysclass;
 
 extern void (*s5pc1xx_idle)(void);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/devs.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/devs.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/devs.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/devs.h	2010-08-01 18:11:14.000000000 -0400
@@ -45,6 +45,7 @@
 extern struct platform_device s3c_device_wdt;
 extern struct platform_device s3c_device_i2c0;
 extern struct platform_device s3c_device_i2c1;
+extern struct platform_device s3c_device_i2c2;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
@@ -57,13 +58,48 @@
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
 
+extern struct platform_device s5pc100_device_spi0;
+extern struct platform_device s5pc100_device_spi1;
+extern struct platform_device s5pc100_device_spi2;
+extern struct platform_device s5pv210_device_spi0;
+extern struct platform_device s5pv210_device_spi1;
+extern struct platform_device s5p6440_device_spi0;
+extern struct platform_device s5p6440_device_spi1;
+
 extern struct platform_device s3c_device_hwmon;
 
 extern struct platform_device s3c_device_nand;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c64xx_device_onenand1;
+extern struct platform_device s5pc110_device_onenand;
 
 extern struct platform_device s3c_device_usbgadget;
 extern struct platform_device s3c_device_usb_hsotg;
 
+extern struct platform_device s5pv210_device_ac97;
+extern struct platform_device s5pv210_device_pcm0;
+extern struct platform_device s5pv210_device_pcm1;
+extern struct platform_device s5pv210_device_pcm2;
+extern struct platform_device s5pv210_device_iis0;
+extern struct platform_device s5pv210_device_iis1;
+extern struct platform_device s5pv210_device_iis2;
+
+extern struct platform_device s5p6442_device_pcm0;
+extern struct platform_device s5p6442_device_pcm1;
+extern struct platform_device s5p6442_device_iis0;
+extern struct platform_device s5p6442_device_iis1;
+extern struct platform_device s5p6442_device_spi;
+
+extern struct platform_device s5p6440_device_pcm;
+extern struct platform_device s5p6440_device_iis;
+
+extern struct platform_device s5pc100_device_ac97;
+extern struct platform_device s5pc100_device_pcm0;
+extern struct platform_device s5pc100_device_pcm1;
+extern struct platform_device s5pc100_device_iis0;
+extern struct platform_device s5pc100_device_iis1;
+extern struct platform_device s5pc100_device_iis2;
+
 /* s3c2440 specific devices */
 
 #ifdef CONFIG_CPU_S3C2440
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/dma.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/dma.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/dma.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/dma.h	2010-08-01 18:11:14.000000000 -0400
@@ -110,8 +110,8 @@
  * configure the device we're talking to
 */
 
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
-				 unsigned long devaddr);
+extern int s3c2410_dma_devconfig(unsigned int channel,
+		enum s3c2410_dmasrc source, unsigned long devaddr);
 
 /* s3c2410_dma_getposition
  *
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/fb.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/fb.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/fb.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/fb.h	2010-08-01 18:11:14.000000000 -0400
@@ -15,6 +15,13 @@
 #ifndef __PLAT_S3C_FB_H
 #define __PLAT_S3C_FB_H __FILE__
 
+/* S3C_FB_MAX_WIN
+ * Set to the maximum number of windows that any of the supported hardware
+ * can use. Since the platform data uses this for an array size, having it
+ * set to the maximum of any version of the hardware can do is safe.
+ */
+#define S3C_FB_MAX_WIN	(5)
+
 /**
  * struct s3c_fb_pd_win - per window setup data
  * @win_mode: The display parameters to initialise (not for window 0)
@@ -77,4 +84,11 @@
  */
 extern void s5pc100_fb_gpio_setup_24bpp(void);
 
+/**
+ * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pv210_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/gpio-cfg.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/gpio-cfg.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/gpio-cfg.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/gpio-cfg.h	2010-08-01 18:11:14.000000000 -0400
@@ -25,6 +25,7 @@
 #define __PLAT_GPIO_CFG_H __FILE__
 
 typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
 
 /* forward declaration if gpio-core.h hasn't been included */
 struct s3c_gpio_chip;
@@ -42,6 +43,11 @@
  * layouts. Provide an point to vector control routine and provide any
  * per-bank configuration information that other systems such as the
  * external interrupt code will need.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_getcfg
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_getpull
  */
 struct s3c_gpio_cfg {
 	unsigned int	cfg_eint;
@@ -69,14 +75,39 @@
 /**
  * s3c_gpio_cfgpin() - Change the GPIO function of a pin.
  * @pin pin The pin number to configure.
- * @pin to The configuration for the pin's function.
+ * @to to The configuration for the pin's function.
  *
  * Configure which function is actually connected to the external
  * pin, such as an gpio input, output or some form of special function
  * connected to an internal peripheral block.
+ *
+ * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT
+ * or S3C_GPIO_SFN() to indicate one of the possible values that the helper
+ * will then generate the correct bit mask and shift for the configuration.
+ *
+ * If a bank of GPIOs all needs to be set to special-function 2, then
+ * the following code will work:
+ *
+ *	for (gpio = start; gpio < end; gpio++)
+ *		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ *
+ * The @to parameter can also be a specific value already shifted to the
+ * correct position in the control register, although these are discouraged
+ * in newer kernels and are only being kept for compatibility.
  */
 extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
 
+/**
+ * s3c_gpio_getcfg - Read the current function for a GPIO pin
+ * @pin: The pin to read the configuration value for.
+ *
+ * Read the configuration state of the given @pin, returning a value that
+ * could be passed back to s3c_gpio_cfgpin().
+ *
+ * @sa s3c_gpio_cfgpin
+ */
+extern unsigned s3c_gpio_getcfg(unsigned int pin);
+
 /* Define values for the pull-{up,down} available for each gpio pin.
  *
  * These values control the state of the weak pull-{up,down} resistors
@@ -96,6 +127,8 @@
  * This function sets the state of the pull-{up,down} resistor for the
  * specified pin. It will return 0 if successfull, or a negative error
  * code if the pin cannot support the requested pull setting.
+ *
+ * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
 */
 extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
 
@@ -107,4 +140,33 @@
 */
 extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
 
+/* Define values for the drvstr available for each gpio pin.
+ *
+ * These values control the value of the output signal driver strength,
+ * configurable on most pins on the S5C series.
+ */
+#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x00)
+#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x01)
+#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x10)
+#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x11)
+
+/**
+ * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the driver streght value for the specified pin.
+*/
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
+
+/**
+ * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
+ * @pin: The pin number to configure the driver streght value
+ * @drvstr: The new value of the driver strength
+ *
+ * This function sets the driver strength value for the specified pin.
+ * It will return 0 if successfull, or a negative error code if the pin
+ * cannot support the requested setting.
+*/
+extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
+
 #endif /* __PLAT_GPIO_CFG_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h	2010-08-01 18:11:14.000000000 -0400
@@ -30,6 +30,12 @@
 	return (chip->config->set_config)(chip, off, config);
 }
 
+static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip,
+					  unsigned int off)
+{
+	return (chip->config->get_config)(chip, off);
+}
+
 static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
 				      unsigned int off, s3c_gpio_pull_t pull)
 {
@@ -53,6 +59,18 @@
 				   unsigned int off, unsigned int cfg);
 
 /**
+ * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg
+ * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the
+ * S3C_GPIO_SPECIAL() macro.
+ */
+unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip,
+				     unsigned int off);
+
+/**
  * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A)
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
@@ -65,6 +83,21 @@
 extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
 				     unsigned int off, unsigned int cfg);
 
+
+/**
+ * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable
+ * GPIO configuration value.
+ *
+ * @sa s3c_gpio_getcfg_s3c24xx
+ * @sa s3c_gpio_getcfg_s3c64xx_4bit
+ */
+extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
+					  unsigned int off);
+
 /**
  * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config.
  * @chip: The gpio chip that is being configured.
@@ -85,6 +118,20 @@
 					unsigned int off, unsigned int cfg);
 
 
+/**
+ * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration
+ * register setting into a value the software can use, such as could be passed
+ * to s3c_gpio_setcfg_s3c64xx_4bit().
+ *
+ * @sa s3c_gpio_getcfg_s3c24xx
+ */
+extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
+					     unsigned int off);
+
 /* Pull-{up,down} resistor controls.
  *
  * S3C2410,S3C2440,S3C24A0 = Pull-UP,
@@ -146,6 +193,17 @@
 					       unsigned int off);
 
 /**
+ * s3c_gpio_getpull_1up() - Get configuration for choice of up or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-up resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_1up.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
+					    unsigned int off);
+
+/**
  * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/gpio-core.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/gpio-core.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/gpio-core.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/gpio-core.h	2010-08-01 18:11:14.000000000 -0400
@@ -44,16 +44,26 @@
  * @chip: The chip structure to be exported via gpiolib.
  * @base: The base pointer to the gpio configuration registers.
  * @config: special function and pull-resistor control information.
+ * @lock: Lock for exclusive access to this gpio bank.
  * @pm_save: Save information for suspend/resume support.
  *
  * This wrapper provides the necessary information for the Samsung
  * specific gpios being registered with gpiolib.
+ *
+ * The lock protects each gpio bank from multiple access of the shared
+ * configuration registers, or from reading of data whilst another thread
+ * is writing to the register set.
+ *
+ * Each chip has its own lock to avoid any  contention between different
+ * CPU cores trying to get one lock for different GPIO banks, where each
+ * bank of GPIO has its own register space and configuration registers.
  */
 struct s3c_gpio_chip {
 	struct gpio_chip	chip;
 	struct s3c_gpio_cfg	*config;
 	struct s3c_gpio_pm	*pm;
 	void __iomem		*base;
+	spinlock_t		 lock;
 #ifdef CONFIG_PM
 	u32			pm_save[4];
 #endif
@@ -97,7 +107,7 @@
  * others = Special functions (dependant on bank)
  *
  * Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a seperate set of function
+ * registers instead of one, we do not have a separate set of function
  * (samsung_gpiolib_add_4bit2_chips)for each case.
  */
 extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip,
@@ -108,6 +118,9 @@
 extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
 extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
 
+/* exported for core SoC support to change */
+extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default;
+
 #ifdef CONFIG_S3C_GPIO_TRACK
 extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
 
@@ -135,3 +148,7 @@
 #define __gpio_pm(x) NULL
 
 #endif /* CONFIG_PM */
+
+/* locking wrappers to deal with multiple access to the same gpio bank */
+#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
+#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/hwmon.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/hwmon.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/hwmon.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/hwmon.h	2010-08-01 18:11:14.000000000 -0400
@@ -37,5 +37,15 @@
 	struct s3c_hwmon_chcfg	*in[8];
 };
 
+/**
+ * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with the S3C HWMON device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
+
 #endif /* __ASM_ARCH_ADC_HWMON_H */
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/iic-core.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/iic-core.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/iic-core.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/iic-core.h	2010-08-01 18:11:14.000000000 -0400
@@ -32,4 +32,11 @@
 #endif
 }
 
+static inline void s3c_i2c2_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_I2C2
+	s3c_device_i2c2.name = name;
+#endif
+}
+
 #endif /* __ASM_ARCH_IIC_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/iic.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/iic.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/iic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/iic.h	2010-08-01 18:11:14.000000000 -0400
@@ -54,9 +54,11 @@
  */
 extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
 
 /* defined by architecture to configure gpio */
 extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
 extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
 
 #endif /* __ASM_ARCH_IIC_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/onenand-core.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/onenand-core.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/onenand-core.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/onenand-core.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,37 @@
+/*
+ * linux/arch/arm/plat-samsung/onenand-core.h
+ *
+ *  Copyright (c) 2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *  Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Samsung OneNAD Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ONENAND_CORE_H
+#define __ASM_ARCH_ONENAND_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_onenand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_ONENAND
+	s3c_device_onenand.name = name;
+#endif
+}
+
+static inline void s3c64xx_onenand1_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_ONENAND1
+	s3c64xx_device_onenand1.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_ONENAND_CORE_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/pll6553x.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/pll6553x.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/pll6553x.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/pll6553x.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,51 @@
+/* arch/arm/plat-samsung/include/plat/pll6553x.h
+ *	partially from arch/arm/mach-s3c64xx/include/mach/pll.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * Samsung PLL6553x PLL code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* S3C6400 and compatible (S3C2416, etc.) EPLL code */
+
+#define PLL6553X_MDIV_MASK	((1 << (23-16)) - 1)
+#define PLL6553X_PDIV_MASK	((1 << (13-8)) - 1)
+#define PLL6553X_SDIV_MASK	((1 << (2-0)) - 1)
+#define PLL6553X_MDIV_SHIFT	(16)
+#define PLL6553X_PDIV_SHIFT	(8)
+#define PLL6553X_SDIV_SHIFT	(0)
+#define PLL6553X_KDIV_MASK	(0xffff)
+
+static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
+					     u32 pll0, u32 pll1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
+	pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
+	sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
+	kdiv = pll1 & PLL6553X_KDIV_MASK;
+
+	/* We need to multiple baseclk by mdiv (the integer part) and kdiv
+	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
+	 * add kdiv before multiplying. The use of tmp is to avoid any
+	 * overflows before shifting bac down into result when multipling
+	 * by the mdiv and kdiv pair.
+	 */
+
+	tmp = baseclk;
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/regs-onenand.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/regs-onenand.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/regs-onenand.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/regs-onenand.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,63 @@
+/*
+ * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h
+ *
+ *  Copyright (C) 2008-2010 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SAMSUNG_ONENAND_H__
+#define __SAMSUNG_ONENAND_H__
+
+#include <mach/hardware.h>
+
+/*
+ * OneNAND Controller
+ */
+#define MEM_CFG_OFFSET		0x0000
+#define BURST_LEN_OFFSET	0x0010
+#define MEM_RESET_OFFSET	0x0020
+#define INT_ERR_STAT_OFFSET	0x0030
+#define INT_ERR_MASK_OFFSET	0x0040
+#define INT_ERR_ACK_OFFSET	0x0050
+#define ECC_ERR_STAT_OFFSET	0x0060
+#define MANUFACT_ID_OFFSET	0x0070
+#define DEVICE_ID_OFFSET	0x0080
+#define DATA_BUF_SIZE_OFFSET	0x0090
+#define BOOT_BUF_SIZE_OFFSET	0x00A0
+#define BUF_AMOUNT_OFFSET	0x00B0
+#define TECH_OFFSET		0x00C0
+#define FBA_WIDTH_OFFSET	0x00D0
+#define FPA_WIDTH_OFFSET	0x00E0
+#define FSA_WIDTH_OFFSET	0x00F0
+#define TRANS_SPARE_OFFSET	0x0140
+#define DBS_DFS_WIDTH_OFFSET	0x0160
+#define INT_PIN_ENABLE_OFFSET	0x01A0
+#define ACC_CLOCK_OFFSET	0x01C0
+#define FLASH_VER_ID_OFFSET	0x01F0
+#define FLASH_AUX_CNTRL_OFFSET	0x0300		/* s3c64xx only */
+
+#define ONENAND_MEM_RESET_HOT	0x3
+#define ONENAND_MEM_RESET_COLD	0x2
+#define ONENAND_MEM_RESET_WARM	0x1
+
+#define CACHE_OP_ERR		(1 << 13)
+#define RST_CMP			(1 << 12)
+#define RDY_ACT			(1 << 11)
+#define INT_ACT			(1 << 10)
+#define UNSUP_CMD		(1 << 9)
+#define LOCKED_BLK		(1 << 8)
+#define BLK_RW_CMP		(1 << 7)
+#define ERS_CMP			(1 << 6)
+#define PGM_CMP			(1 << 5)
+#define LOAD_CMP		(1 << 4)
+#define ERS_FAIL		(1 << 3)
+#define PGM_FAIL		(1 << 2)
+#define INT_TO			(1 << 1)
+#define LD_FAIL_ECC_ERR		(1 << 0)
+
+#define TSRF			(1 << 0)
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/regs-rtc.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/regs-rtc.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/regs-rtc.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/regs-rtc.h	2010-08-01 18:11:14.000000000 -0400
@@ -20,6 +20,10 @@
 #define S3C2410_RTCCON_CLKSEL (1<<1)
 #define S3C2410_RTCCON_CNTSEL (1<<2)
 #define S3C2410_RTCCON_CLKRST (1<<3)
+#define S3C64XX_RTCCON_TICEN  (1<<8)
+
+#define S3C64XX_RTCCON_TICMSK (0xF<<7)
+#define S3C64XX_RTCCON_TICSHT (7)
 
 #define S3C2410_TICNT	      S3C2410_RTCREG(0x44)
 #define S3C2410_TICNT_ENABLE  (1<<7)
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,82 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
- *
- * Copyright 2007 Simtec Electronics <linux@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 IIS register definition
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H
-#define __ASM_ARCH_REGS_S3C2412_IIS_H
-
-#define S3C2412_IISCON			(0x00)
-#define S3C2412_IISMOD			(0x04)
-#define S3C2412_IISFIC			(0x08)
-#define S3C2412_IISPSR			(0x0C)
-#define S3C2412_IISTXD			(0x10)
-#define S3C2412_IISRXD			(0x14)
-
-#define S3C2412_IISCON_LRINDEX		(1 << 11)
-#define S3C2412_IISCON_TXFIFO_EMPTY	(1 << 10)
-#define S3C2412_IISCON_RXFIFO_EMPTY	(1 << 9)
-#define S3C2412_IISCON_TXFIFO_FULL	(1 << 8)
-#define S3C2412_IISCON_RXFIFO_FULL	(1 << 7)
-#define S3C2412_IISCON_TXDMA_PAUSE	(1 << 6)
-#define S3C2412_IISCON_RXDMA_PAUSE	(1 << 5)
-#define S3C2412_IISCON_TXCH_PAUSE	(1 << 4)
-#define S3C2412_IISCON_RXCH_PAUSE	(1 << 3)
-#define S3C2412_IISCON_TXDMA_ACTIVE	(1 << 2)
-#define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
-#define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
-
-#define S3C64XX_IISMOD_BLC_16BIT	(0 << 13)
-#define S3C64XX_IISMOD_BLC_8BIT		(1 << 13)
-#define S3C64XX_IISMOD_BLC_24BIT	(2 << 13)
-#define S3C64XX_IISMOD_BLC_MASK		(3 << 13)
-
-#define S3C64XX_IISMOD_IMS_PCLK		(0 << 10)
-#define S3C64XX_IISMOD_IMS_SYSMUX	(1 << 10)
-
-#define S3C2412_IISMOD_MASTER_INTERNAL	(0 << 10)
-#define S3C2412_IISMOD_MASTER_EXTERNAL	(1 << 10)
-#define S3C2412_IISMOD_SLAVE		(2 << 10)
-#define S3C2412_IISMOD_MASTER_MASK	(3 << 10)
-#define S3C2412_IISMOD_MODE_TXONLY	(0 << 8)
-#define S3C2412_IISMOD_MODE_RXONLY	(1 << 8)
-#define S3C2412_IISMOD_MODE_TXRX	(2 << 8)
-#define S3C2412_IISMOD_MODE_MASK	(3 << 8)
-#define S3C2412_IISMOD_LR_LLOW		(0 << 7)
-#define S3C2412_IISMOD_LR_RLOW		(1 << 7)
-#define S3C2412_IISMOD_SDF_IIS		(0 << 5)
-#define S3C2412_IISMOD_SDF_MSB		(1 << 5)
-#define S3C2412_IISMOD_SDF_LSB		(2 << 5)
-#define S3C2412_IISMOD_SDF_MASK		(3 << 5)
-#define S3C2412_IISMOD_RCLK_256FS	(0 << 3)
-#define S3C2412_IISMOD_RCLK_512FS	(1 << 3)
-#define S3C2412_IISMOD_RCLK_384FS	(2 << 3)
-#define S3C2412_IISMOD_RCLK_768FS	(3 << 3)
-#define S3C2412_IISMOD_RCLK_MASK 	(3 << 3)
-#define S3C2412_IISMOD_BCLK_32FS	(0 << 1)
-#define S3C2412_IISMOD_BCLK_48FS	(1 << 1)
-#define S3C2412_IISMOD_BCLK_16FS	(2 << 1)
-#define S3C2412_IISMOD_BCLK_24FS	(3 << 1)
-#define S3C2412_IISMOD_BCLK_MASK	(3 << 1)
-#define S3C2412_IISMOD_8BIT		(1 << 0)
-
-#define S3C64XX_IISMOD_CDCLKCON		(1 << 12)
-
-#define S3C2412_IISPSR_PSREN		(1 << 15)
-
-#define S3C2412_IISFIC_TXFLUSH		(1 << 15)
-#define S3C2412_IISFIC_RXFLUSH		(1 << 7)
-#define S3C2412_IISFIC_TXCOUNT(x)	(((x) >>  8) & 0xf)
-#define S3C2412_IISFIC_RXCOUNT(x)	(((x) >>  0) & 0xf)
-
-
-
-#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */
-
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h	2010-08-01 18:11:14.000000000 -0400
@@ -63,5 +63,9 @@
  * has some chips attached to it.
  */
 extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s5p6440_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
 
 #endif /* __S3C64XX_PLAT_SPI_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__S3C_DMA_PL330_H_
+#define	__S3C_DMA_PL330_H_
+
+#define S3C2410_DMAF_AUTOSTART		(1 << 0)
+#define S3C2410_DMAF_CIRCULAR		(1 << 1)
+
+/*
+ * PL330 can assign any channel to communicate with
+ * any of the peripherals attched to the DMAC.
+ * For the sake of consistency across client drivers,
+ * We keep the channel names unchanged and only add
+ * missing peripherals are added.
+ * Order is not important since S3C PL330 API driver
+ * use these just as IDs.
+ */
+enum dma_ch {
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_IRDA,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
+	DMACH_EXTERNAL,
+	DMACH_PWM,
+	DMACH_SPDIF,
+	DMACH_HSI_RX,
+	DMACH_HSI_TX,
+	DMACH_PCM0_TX,
+	DMACH_PCM0_RX,
+	DMACH_PCM1_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM2_TX,
+	DMACH_PCM2_RX,
+	DMACH_MSM_REQ3,
+	DMACH_MSM_REQ2,
+	DMACH_MSM_REQ1,
+	DMACH_MSM_REQ0,
+	/* END Marker, also used to denote a reserved channel */
+	DMACH_MAX,
+};
+
+static inline bool s3c_dma_has_circular(void)
+{
+	return true;
+}
+
+#include <plat/dma.h>
+
+#endif	/* __S3C_DMA_PL330_H_ */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,32 @@
+/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __S3C_PL330_PDATA_H
+#define __S3C_PL330_PDATA_H
+
+#include <plat/s3c-dma-pl330.h>
+
+/*
+ * Every PL330 DMAC has max 32 peripheral interfaces,
+ * of which some may be not be really used in your
+ * DMAC's configuration.
+ * Populate this array of 32 peri i/fs with relevant
+ * channel IDs for used peri i/f and DMACH_MAX for
+ * those unused.
+ *
+ * The platforms just need to provide this info
+ * to the S3C DMA API driver for PL330.
+ */
+struct s3c_pl330_platdata {
+	enum dma_ch peri[32];
+};
+
+#endif /* __S3C_PL330_PDATA_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/sdhci.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/sdhci.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/sdhci.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/sdhci.h	2010-08-01 18:11:14.000000000 -0400
@@ -75,6 +75,9 @@
 extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 
 /* S3C6400 SDHCI setup */
 
@@ -163,8 +166,10 @@
 #else
 static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void) { }
+static inline void s3c6410_default_sdhci2(void) { }
 static inline void s3c6400_default_sdhci0(void) { }
 static inline void s3c6400_default_sdhci1(void) { }
+static inline void s3c6400_default_sdhci2(void) { }
 
 #endif /* CONFIG_S3C64XX_SETUP_SDHCI */
 
@@ -218,4 +223,56 @@
 static inline void s5pc100_default_sdhci2(void) { }
 #endif /* CONFIG_S5PC100_SETUP_SDHCI */
 
+
+/* S5PC110 SDHCI setup */
+#ifdef CONFIG_S5PV210_SETUP_SDHCI
+extern char *s5pv210_hsmmc_clksrcs[4];
+
+extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s5pv210_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pv210_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s5pv210_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pv210_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s5pv210_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pv210_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
+#else
+static inline void s5pv210_default_sdhci0(void) { }
+static inline void s5pv210_default_sdhci1(void) { }
+static inline void s5pv210_default_sdhci2(void) { }
+#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
+
+
+
 #endif /* __PLAT_S3C_SDHCI_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/ts.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/ts.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/ts.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/ts.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,25 @@
+/* arch/arm/plat-samsung/include/plat/ts.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_TS_H
+#define __ASM_ARM_TS_H
+
+struct s3c2410_ts_mach_info {
+       int             delay;
+       int             presc;
+       int             oversampling_shift;
+	void    (*cfg_gpio)(struct platform_device *dev);
+};
+
+extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
+
+/* defined by architecture to configure gpio */
+extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
+
+#endif /* __ASM_ARM_TS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/wakeup-mask.h linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/wakeup-mask.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/include/plat/wakeup-mask.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/include/plat/wakeup-mask.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,44 @@
+/* arch/arm/plat-samsung/include/plat/wakeup-mask.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Support for wakeup mask interrupts on newer SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifndef __PLAT_WAKEUP_MASK_H
+#define __PLAT_WAKEUP_MASK_H __file__
+
+/* if no irq yet defined, but still want to mask */
+#define NO_WAKEUP_IRQ (0x90000000)
+
+/**
+ * struct samsung_wakeup_mask - wakeup mask information
+ * @irq: The interrupt associated with this wakeup.
+ * @bit: The bit, as a (1 << bitno) controlling this source.
+ */ 
+struct samsung_wakeup_mask {
+	unsigned int	irq;
+	u32		bit;
+};
+
+/**
+ * samsung_sync_wakemask - sync wakeup mask information for pm
+ * @reg: The register that is used.
+ * @masks: The list of masks to use.
+ * @nr_masks: The number of entries pointed to buy @masks.
+ *
+ * Synchronise the wakeup mask information at suspend time from the list
+ * of interrupts and control bits in @masks. We do this at suspend time
+ * as overriding the relevant irq chips is harder and the register is only
+ * required to be correct before we enter sleep.
+ */
+extern void samsung_sync_wakemask(void __iomem *reg,
+				  struct samsung_wakeup_mask *masks,
+				  int nr_masks);
+
+#endif /* __PLAT_WAKEUP_MASK_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/Kconfig linux-libre-2.6.35-gnu/arch/arm/plat-samsung/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -6,7 +6,7 @@
 
 config PLAT_SAMSUNG
 	bool
-	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
 	select NO_IOPORT
 	default y
 	help
@@ -90,12 +90,6 @@
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
-config S5P_GPIO_CFG_S5PC1XX
-	bool
-	help
-	  Internal configuration to enable S5PC1XX style GPIO configuration
-	  functions.
-
 config S3C_GPIO_PULL_UPDOWN
 	bool
 	help
@@ -111,6 +105,12 @@
 	help
 	  Internal configuration to enable the correct GPIO pull helper
 
+config S5P_GPIO_DRVSTR
+	bool
+	help
+	  Internal configuration to get and set correct GPIO driver strength
+	  helper
+
 config SAMSUNG_GPIO_EXTRA
 	int "Number of additional GPIO pins"
 	default 0
@@ -160,11 +160,21 @@
 	help
 	  Compile in platform device definitions for HSMMC channel 2
 
+config S3C_DEV_HWMON
+	bool
+	help
+	    Compile in platform device definitions for HWMON
+
 config S3C_DEV_I2C1
 	bool
 	help
 	  Compile in platform device definitions for I2C channel 1
 
+config S3C_DEV_I2C2
+	bool
+	help
+	  Compile in platform device definitions for I2C channel 2
+
 config S3C_DEV_FB
 	bool
 	help
@@ -180,17 +190,43 @@
 	help
 	  Compile in platform device definition for USB high-speed OtG
 
+config S3C_DEV_WDT
+	bool
+	default y if ARCH_S3C2410
+	help
+	  Complie in platform device definition for Watchdog Timer
+
 config S3C_DEV_NAND
 	bool
 	help
 	  Compile in platform device definition for NAND controller
 
+config S3C_DEV_ONENAND
+	bool
+	help
+	  Compile in platform device definition for OneNAND controller
+
+config S3C_DEV_RTC
+	bool
+	help
+	  Complie in platform device definition for RTC
+
+config SAMSUNG_DEV_ADC
+	bool
+	help
+	  Compile in platform device definition for ADC controller
+
 config S3C64XX_DEV_SPI
 	bool
 	help
 	  Compile in platform device definitions for S3C64XX's type
 	  SPI controllers.
 
+config SAMSUNG_DEV_TS
+	bool
+	help
+	    Common in platform device definitions for touchscreen device
+
 # DMA
 
 config S3C_DMA
@@ -198,6 +234,12 @@
 	help
 	  Internal configuration for S3C DMA core
 
+config S3C_PL330_DMA
+	bool
+	select PL330
+	help
+	  S3C DMA API Driver for PL330 DMAC.
+
 comment "Power management"
 
 config SAMSUNG_PM_DEBUG
@@ -243,4 +285,12 @@
 
 	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 
+config SAMSUNG_WAKEMASK
+	bool
+	depends on PM
+	help
+	  Compile support for wakeup-mask controls found on the S3C6400
+	  and above. This code allows a set of interrupt to wakeup-mask
+	  mappings. See <plat/wakeup-mask.h>
+
 endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/Makefile linux-libre-2.6.35-gnu/arch/arm/plat-samsung/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -33,24 +33,36 @@
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
+obj-$(CONFIG_S3C_DEV_HWMON)	+= dev-hwmon.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
+obj-$(CONFIG_S3C_DEV_I2C2)	+= dev-i2c2.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-y				+= dev-uart.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
+obj-$(CONFIG_S3C_DEV_WDT)	+= dev-wdt.o
 obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
+obj-$(CONFIG_S3C_DEV_ONENAND)	+= dev-onenand.o
+obj-$(CONFIG_S3C_DEV_RTC)	+= dev-rtc.o
+
+obj-$(CONFIG_SAMSUNG_DEV_ADC)	+= dev-adc.o
+obj-$(CONFIG_SAMSUNG_DEV_TS)	+= dev-ts.o
 
 # DMA support
 
 obj-$(CONFIG_S3C_DMA)		+= dma.o
 
+obj-$(CONFIG_S3C_PL330_DMA)	+= s3c-pl330.o
+
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
 
+obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
+
 # PWM support
 
 obj-$(CONFIG_HAVE_PWM)		+= pwm.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/pm-gpio.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/pm-gpio.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/pm-gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/pm-gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -329,10 +329,12 @@
 	struct s3c_gpio_chip *ourchip;
 	unsigned int gpio_nr;
 
-	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
 		ourchip = s3c_gpiolib_getchip(gpio_nr);
-		if (!ourchip)
+		if (!ourchip) {
+			gpio_nr++;
 			continue;
+		}
 
 		s3c_pm_save_gpio(ourchip);
 
@@ -367,10 +369,12 @@
 	struct s3c_gpio_chip *ourchip;
 	unsigned int gpio_nr;
 
-	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+	for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
 		ourchip = s3c_gpiolib_getchip(gpio_nr);
-		if (!ourchip)
+		if (!ourchip) {
+			gpio_nr++;
 			continue;
+		}
 
 		s3c_pm_resume_gpio(ourchip);
 
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/s3c-pl330.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/s3c-pl330.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/s3c-pl330.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/s3c-pl330.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,1224 @@
+/* linux/arch/arm/plat-samsung/s3c-pl330.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware/pl330.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+/**
+ * struct s3c_pl330_dmac - Logical representation of a PL330 DMAC.
+ * @busy_chan: Number of channels currently busy.
+ * @peri: List of IDs of peripherals this DMAC can work with.
+ * @node: To attach to the global list of DMACs.
+ * @pi: PL330 configuration info for the DMAC.
+ * @kmcache: Pool to quickly allocate xfers for all channels in the dmac.
+ */
+struct s3c_pl330_dmac {
+	unsigned		busy_chan;
+	enum dma_ch		*peri;
+	struct list_head	node;
+	struct pl330_info	*pi;
+	struct kmem_cache	*kmcache;
+};
+
+/**
+ * struct s3c_pl330_xfer - A request submitted by S3C DMA clients.
+ * @token: Xfer ID provided by the client.
+ * @node: To attach to the list of xfers on a channel.
+ * @px: Xfer for PL330 core.
+ * @chan: Owner channel of this xfer.
+ */
+struct s3c_pl330_xfer {
+	void			*token;
+	struct list_head	node;
+	struct pl330_xfer	px;
+	struct s3c_pl330_chan	*chan;
+};
+
+/**
+ * struct s3c_pl330_chan - Logical channel to communicate with
+ * 	a Physical peripheral.
+ * @pl330_chan_id: Token of a hardware channel thread of PL330 DMAC.
+ * 	NULL if the channel is available to be acquired.
+ * @id: ID of the peripheral that this channel can communicate with.
+ * @options: Options specified by the client.
+ * @sdaddr: Address provided via s3c2410_dma_devconfig.
+ * @node: To attach to the global list of channels.
+ * @lrq: Pointer to the last submitted pl330_req to PL330 core.
+ * @xfer_list: To manage list of xfers enqueued.
+ * @req: Two requests to communicate with the PL330 engine.
+ * @callback_fn: Callback function to the client.
+ * @rqcfg: Channel configuration for the xfers.
+ * @xfer_head: Pointer to the xfer to be next excecuted.
+ * @dmac: Pointer to the DMAC that manages this channel, NULL if the
+ * 	channel is available to be acquired.
+ * @client: Client of this channel. NULL if the
+ * 	channel is available to be acquired.
+ */
+struct s3c_pl330_chan {
+	void				*pl330_chan_id;
+	enum dma_ch			id;
+	unsigned int			options;
+	unsigned long			sdaddr;
+	struct list_head		node;
+	struct pl330_req		*lrq;
+	struct list_head		xfer_list;
+	struct pl330_req		req[2];
+	s3c2410_dma_cbfn_t		callback_fn;
+	struct pl330_reqcfg		rqcfg;
+	struct s3c_pl330_xfer		*xfer_head;
+	struct s3c_pl330_dmac		*dmac;
+	struct s3c2410_dma_client	*client;
+};
+
+/* All DMACs in the platform */
+static LIST_HEAD(dmac_list);
+
+/* All channels to peripherals in the platform */
+static LIST_HEAD(chan_list);
+
+/*
+ * Since we add resources(DMACs and Channels) to the global pool,
+ * we need to guard access to the resources using a global lock
+ */
+static DEFINE_SPINLOCK(res_lock);
+
+/* Returns the channel with ID 'id' in the chan_list */
+static struct s3c_pl330_chan *id_to_chan(const enum dma_ch id)
+{
+	struct s3c_pl330_chan *ch;
+
+	list_for_each_entry(ch, &chan_list, node)
+		if (ch->id == id)
+			return ch;
+
+	return NULL;
+}
+
+/* Allocate a new channel with ID 'id' and add to chan_list */
+static void chan_add(const enum dma_ch id)
+{
+	struct s3c_pl330_chan *ch = id_to_chan(id);
+
+	/* Return if the channel already exists */
+	if (ch)
+		return;
+
+	ch = kmalloc(sizeof(*ch), GFP_KERNEL);
+	/* Return silently to work with other channels */
+	if (!ch)
+		return;
+
+	ch->id = id;
+	ch->dmac = NULL;
+
+	list_add_tail(&ch->node, &chan_list);
+}
+
+/* If the channel is not yet acquired by any client */
+static bool chan_free(struct s3c_pl330_chan *ch)
+{
+	if (!ch)
+		return false;
+
+	/* Channel points to some DMAC only when it's acquired */
+	return ch->dmac ? false : true;
+}
+
+/*
+ * Returns 0 is peripheral i/f is invalid or not present on the dmac.
+ * Index + 1, otherwise.
+ */
+static unsigned iface_of_dmac(struct s3c_pl330_dmac *dmac, enum dma_ch ch_id)
+{
+	enum dma_ch *id = dmac->peri;
+	int i;
+
+	/* Discount invalid markers */
+	if (ch_id == DMACH_MAX)
+		return 0;
+
+	for (i = 0; i < PL330_MAX_PERI; i++)
+		if (id[i] == ch_id)
+			return i + 1;
+
+	return 0;
+}
+
+/* If all channel threads of the DMAC are busy */
+static inline bool dmac_busy(struct s3c_pl330_dmac *dmac)
+{
+	struct pl330_info *pi = dmac->pi;
+
+	return (dmac->busy_chan < pi->pcfg.num_chan) ? false : true;
+}
+
+/*
+ * Returns the number of free channels that
+ * can be handled by this dmac only.
+ */
+static unsigned ch_onlyby_dmac(struct s3c_pl330_dmac *dmac)
+{
+	enum dma_ch *id = dmac->peri;
+	struct s3c_pl330_dmac *d;
+	struct s3c_pl330_chan *ch;
+	unsigned found, count = 0;
+	enum dma_ch p;
+	int i;
+
+	for (i = 0; i < PL330_MAX_PERI; i++) {
+		p = id[i];
+		ch = id_to_chan(p);
+
+		if (p == DMACH_MAX || !chan_free(ch))
+			continue;
+
+		found = 0;
+		list_for_each_entry(d, &dmac_list, node) {
+			if (d != dmac && iface_of_dmac(d, ch->id)) {
+				found = 1;
+				break;
+			}
+		}
+		if (!found)
+			count++;
+	}
+
+	return count;
+}
+
+/*
+ * Measure of suitability of 'dmac' handling 'ch'
+ *
+ * 0 indicates 'dmac' can not handle 'ch' either
+ * because it is not supported by the hardware or
+ * because all dmac channels are currently busy.
+ *
+ * >0 vlaue indicates 'dmac' has the capability.
+ * The bigger the value the more suitable the dmac.
+ */
+#define MAX_SUIT	UINT_MAX
+#define MIN_SUIT	0
+
+static unsigned suitablility(struct s3c_pl330_dmac *dmac,
+		struct s3c_pl330_chan *ch)
+{
+	struct pl330_info *pi = dmac->pi;
+	enum dma_ch *id = dmac->peri;
+	struct s3c_pl330_dmac *d;
+	unsigned s;
+	int i;
+
+	s = MIN_SUIT;
+	/* If all the DMAC channel threads are busy */
+	if (dmac_busy(dmac))
+		return s;
+
+	for (i = 0; i < PL330_MAX_PERI; i++)
+		if (id[i] == ch->id)
+			break;
+
+	/* If the 'dmac' can't talk to 'ch' */
+	if (i == PL330_MAX_PERI)
+		return s;
+
+	s = MAX_SUIT;
+	list_for_each_entry(d, &dmac_list, node) {
+		/*
+		 * If some other dmac can talk to this
+		 * peri and has some channel free.
+		 */
+		if (d != dmac && iface_of_dmac(d, ch->id) && !dmac_busy(d)) {
+			s = 0;
+			break;
+		}
+	}
+	if (s)
+		return s;
+
+	s = 100;
+
+	/* Good if free chans are more, bad otherwise */
+	s += (pi->pcfg.num_chan - dmac->busy_chan) - ch_onlyby_dmac(dmac);
+
+	return s;
+}
+
+/* More than one DMAC may have capability to transfer data with the
+ * peripheral. This function assigns most suitable DMAC to manage the
+ * channel and hence communicate with the peripheral.
+ */
+static struct s3c_pl330_dmac *map_chan_to_dmac(struct s3c_pl330_chan *ch)
+{
+	struct s3c_pl330_dmac *d, *dmac = NULL;
+	unsigned sn, sl = MIN_SUIT;
+
+	list_for_each_entry(d, &dmac_list, node) {
+		sn = suitablility(d, ch);
+
+		if (sn == MAX_SUIT)
+			return d;
+
+		if (sn > sl)
+			dmac = d;
+	}
+
+	return dmac;
+}
+
+/* Acquire the channel for peripheral 'id' */
+static struct s3c_pl330_chan *chan_acquire(const enum dma_ch id)
+{
+	struct s3c_pl330_chan *ch = id_to_chan(id);
+	struct s3c_pl330_dmac *dmac;
+
+	/* If the channel doesn't exist or is already acquired */
+	if (!ch || !chan_free(ch)) {
+		ch = NULL;
+		goto acq_exit;
+	}
+
+	dmac = map_chan_to_dmac(ch);
+	/* If couldn't map */
+	if (!dmac) {
+		ch = NULL;
+		goto acq_exit;
+	}
+
+	dmac->busy_chan++;
+	ch->dmac = dmac;
+
+acq_exit:
+	return ch;
+}
+
+/* Delete xfer from the queue */
+static inline void del_from_queue(struct s3c_pl330_xfer *xfer)
+{
+	struct s3c_pl330_xfer *t;
+	struct s3c_pl330_chan *ch;
+	int found;
+
+	if (!xfer)
+		return;
+
+	ch = xfer->chan;
+
+	/* Make sure xfer is in the queue */
+	found = 0;
+	list_for_each_entry(t, &ch->xfer_list, node)
+		if (t == xfer) {
+			found = 1;
+			break;
+		}
+
+	if (!found)
+		return;
+
+	/* If xfer is last entry in the queue */
+	if (xfer->node.next == &ch->xfer_list)
+		t = list_entry(ch->xfer_list.next,
+				struct s3c_pl330_xfer, node);
+	else
+		t = list_entry(xfer->node.next,
+				struct s3c_pl330_xfer, node);
+
+	/* If there was only one node left */
+	if (t == xfer)
+		ch->xfer_head = NULL;
+	else if (ch->xfer_head == xfer)
+		ch->xfer_head = t;
+
+	list_del(&xfer->node);
+}
+
+/* Provides pointer to the next xfer in the queue.
+ * If CIRCULAR option is set, the list is left intact,
+ * otherwise the xfer is removed from the list.
+ * Forced delete 'pluck' can be set to override the CIRCULAR option.
+ */
+static struct s3c_pl330_xfer *get_from_queue(struct s3c_pl330_chan *ch,
+		int pluck)
+{
+	struct s3c_pl330_xfer *xfer = ch->xfer_head;
+
+	if (!xfer)
+		return NULL;
+
+	/* If xfer is last entry in the queue */
+	if (xfer->node.next == &ch->xfer_list)
+		ch->xfer_head = list_entry(ch->xfer_list.next,
+					struct s3c_pl330_xfer, node);
+	else
+		ch->xfer_head = list_entry(xfer->node.next,
+					struct s3c_pl330_xfer, node);
+
+	if (pluck || !(ch->options & S3C2410_DMAF_CIRCULAR))
+		del_from_queue(xfer);
+
+	return xfer;
+}
+
+static inline void add_to_queue(struct s3c_pl330_chan *ch,
+		struct s3c_pl330_xfer *xfer, int front)
+{
+	struct pl330_xfer *xt;
+
+	/* If queue empty */
+	if (ch->xfer_head == NULL)
+		ch->xfer_head = xfer;
+
+	xt = &ch->xfer_head->px;
+	/* If the head already submitted (CIRCULAR head) */
+	if (ch->options & S3C2410_DMAF_CIRCULAR &&
+		(xt == ch->req[0].x || xt == ch->req[1].x))
+		ch->xfer_head = xfer;
+
+	/* If this is a resubmission, it should go at the head */
+	if (front) {
+		ch->xfer_head = xfer;
+		list_add(&xfer->node, &ch->xfer_list);
+	} else {
+		list_add_tail(&xfer->node, &ch->xfer_list);
+	}
+}
+
+static inline void _finish_off(struct s3c_pl330_xfer *xfer,
+		enum s3c2410_dma_buffresult res, int ffree)
+{
+	struct s3c_pl330_chan *ch;
+
+	if (!xfer)
+		return;
+
+	ch = xfer->chan;
+
+	/* Do callback */
+	if (ch->callback_fn)
+		ch->callback_fn(NULL, xfer->token, xfer->px.bytes, res);
+
+	/* Force Free or if buffer is not needed anymore */
+	if (ffree || !(ch->options & S3C2410_DMAF_CIRCULAR))
+		kmem_cache_free(ch->dmac->kmcache, xfer);
+}
+
+static inline int s3c_pl330_submit(struct s3c_pl330_chan *ch,
+		struct pl330_req *r)
+{
+	struct s3c_pl330_xfer *xfer;
+	int ret = 0;
+
+	/* If already submitted */
+	if (r->x)
+		return 0;
+
+	xfer = get_from_queue(ch, 0);
+	if (xfer) {
+		r->x = &xfer->px;
+
+		/* Use max bandwidth for M<->M xfers */
+		if (r->rqtype == MEMTOMEM) {
+			struct pl330_info *pi = xfer->chan->dmac->pi;
+			int burst = 1 << ch->rqcfg.brst_size;
+			u32 bytes = r->x->bytes;
+			int bl;
+
+			bl = pi->pcfg.data_bus_width / 8;
+			bl *= pi->pcfg.data_buf_dep;
+			bl /= burst;
+
+			/* src/dst_burst_len can't be more than 16 */
+			if (bl > 16)
+				bl = 16;
+
+			while (bl > 1) {
+				if (!(bytes % (bl * burst)))
+					break;
+				bl--;
+			}
+
+			ch->rqcfg.brst_len = bl;
+		} else {
+			ch->rqcfg.brst_len = 1;
+		}
+
+		ret = pl330_submit_req(ch->pl330_chan_id, r);
+
+		/* If submission was successful */
+		if (!ret) {
+			ch->lrq = r; /* latest submitted req */
+			return 0;
+		}
+
+		r->x = NULL;
+
+		/* If both of the PL330 ping-pong buffers filled */
+		if (ret == -EAGAIN) {
+			dev_err(ch->dmac->pi->dev, "%s:%d!\n",
+				__func__, __LINE__);
+			/* Queue back again */
+			add_to_queue(ch, xfer, 1);
+			ret = 0;
+		} else {
+			dev_err(ch->dmac->pi->dev, "%s:%d!\n",
+				__func__, __LINE__);
+			_finish_off(xfer, S3C2410_RES_ERR, 0);
+		}
+	}
+
+	return ret;
+}
+
+static void s3c_pl330_rq(struct s3c_pl330_chan *ch,
+	struct pl330_req *r, enum pl330_op_err err)
+{
+	unsigned long flags;
+	struct s3c_pl330_xfer *xfer;
+	struct pl330_xfer *xl = r->x;
+	enum s3c2410_dma_buffresult res;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	r->x = NULL;
+
+	s3c_pl330_submit(ch, r);
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	/* Map result to S3C DMA API */
+	if (err == PL330_ERR_NONE)
+		res = S3C2410_RES_OK;
+	else if (err == PL330_ERR_ABORT)
+		res = S3C2410_RES_ABORT;
+	else
+		res = S3C2410_RES_ERR;
+
+	/* If last request had some xfer */
+	if (xl) {
+		xfer = container_of(xl, struct s3c_pl330_xfer, px);
+		_finish_off(xfer, res, 0);
+	} else {
+		dev_info(ch->dmac->pi->dev, "%s:%d No Xfer?!\n",
+			__func__, __LINE__);
+	}
+}
+
+static void s3c_pl330_rq0(void *token, enum pl330_op_err err)
+{
+	struct pl330_req *r = token;
+	struct s3c_pl330_chan *ch = container_of(r,
+					struct s3c_pl330_chan, req[0]);
+	s3c_pl330_rq(ch, r, err);
+}
+
+static void s3c_pl330_rq1(void *token, enum pl330_op_err err)
+{
+	struct pl330_req *r = token;
+	struct s3c_pl330_chan *ch = container_of(r,
+					struct s3c_pl330_chan, req[1]);
+	s3c_pl330_rq(ch, r, err);
+}
+
+/* Release an acquired channel */
+static void chan_release(struct s3c_pl330_chan *ch)
+{
+	struct s3c_pl330_dmac *dmac;
+
+	if (chan_free(ch))
+		return;
+
+	dmac = ch->dmac;
+	ch->dmac = NULL;
+	dmac->busy_chan--;
+}
+
+int s3c2410_dma_ctrl(enum dma_ch id, enum s3c2410_chan_op op)
+{
+	struct s3c_pl330_xfer *xfer;
+	enum pl330_chan_op pl330op;
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int idx, ret;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch)) {
+		ret = -EINVAL;
+		goto ctrl_exit;
+	}
+
+	switch (op) {
+	case S3C2410_DMAOP_START:
+		/* Make sure both reqs are enqueued */
+		idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+		s3c_pl330_submit(ch, &ch->req[idx]);
+		s3c_pl330_submit(ch, &ch->req[1 - idx]);
+		pl330op = PL330_OP_START;
+		break;
+
+	case S3C2410_DMAOP_STOP:
+		pl330op = PL330_OP_ABORT;
+		break;
+
+	case S3C2410_DMAOP_FLUSH:
+		pl330op = PL330_OP_FLUSH;
+		break;
+
+	case S3C2410_DMAOP_PAUSE:
+	case S3C2410_DMAOP_RESUME:
+	case S3C2410_DMAOP_TIMEOUT:
+	case S3C2410_DMAOP_STARTED:
+		spin_unlock_irqrestore(&res_lock, flags);
+		return 0;
+
+	default:
+		spin_unlock_irqrestore(&res_lock, flags);
+		return -EINVAL;
+	}
+
+	ret = pl330_chan_ctrl(ch->pl330_chan_id, pl330op);
+
+	if (pl330op == PL330_OP_START) {
+		spin_unlock_irqrestore(&res_lock, flags);
+		return ret;
+	}
+
+	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+
+	/* Abort the current xfer */
+	if (ch->req[idx].x) {
+		xfer = container_of(ch->req[idx].x,
+				struct s3c_pl330_xfer, px);
+
+		/* Drop xfer during FLUSH */
+		if (pl330op == PL330_OP_FLUSH)
+			del_from_queue(xfer);
+
+		ch->req[idx].x = NULL;
+
+		spin_unlock_irqrestore(&res_lock, flags);
+		_finish_off(xfer, S3C2410_RES_ABORT,
+				pl330op == PL330_OP_FLUSH ? 1 : 0);
+		spin_lock_irqsave(&res_lock, flags);
+	}
+
+	/* Flush the whole queue */
+	if (pl330op == PL330_OP_FLUSH) {
+
+		if (ch->req[1 - idx].x) {
+			xfer = container_of(ch->req[1 - idx].x,
+					struct s3c_pl330_xfer, px);
+
+			del_from_queue(xfer);
+
+			ch->req[1 - idx].x = NULL;
+
+			spin_unlock_irqrestore(&res_lock, flags);
+			_finish_off(xfer, S3C2410_RES_ABORT, 1);
+			spin_lock_irqsave(&res_lock, flags);
+		}
+
+		/* Finish off the remaining in the queue */
+		xfer = ch->xfer_head;
+		while (xfer) {
+
+			del_from_queue(xfer);
+
+			spin_unlock_irqrestore(&res_lock, flags);
+			_finish_off(xfer, S3C2410_RES_ABORT, 1);
+			spin_lock_irqsave(&res_lock, flags);
+
+			xfer = ch->xfer_head;
+		}
+	}
+
+ctrl_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+int s3c2410_dma_enqueue(enum dma_ch id, void *token,
+			dma_addr_t addr, int size)
+{
+	struct s3c_pl330_chan *ch;
+	struct s3c_pl330_xfer *xfer;
+	unsigned long flags;
+	int idx, ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	/* Error if invalid or free channel */
+	if (!ch || chan_free(ch)) {
+		ret = -EINVAL;
+		goto enq_exit;
+	}
+
+	/* Error if size is unaligned */
+	if (ch->rqcfg.brst_size && size % (1 << ch->rqcfg.brst_size)) {
+		ret = -EINVAL;
+		goto enq_exit;
+	}
+
+	xfer = kmem_cache_alloc(ch->dmac->kmcache, GFP_ATOMIC);
+	if (!xfer) {
+		ret = -ENOMEM;
+		goto enq_exit;
+	}
+
+	xfer->token = token;
+	xfer->chan = ch;
+	xfer->px.bytes = size;
+	xfer->px.next = NULL; /* Single request */
+
+	/* For S3C DMA API, direction is always fixed for all xfers */
+	if (ch->req[0].rqtype == MEMTODEV) {
+		xfer->px.src_addr = addr;
+		xfer->px.dst_addr = ch->sdaddr;
+	} else {
+		xfer->px.src_addr = ch->sdaddr;
+		xfer->px.dst_addr = addr;
+	}
+
+	add_to_queue(ch, xfer, 0);
+
+	/* Try submitting on either request */
+	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+
+	if (!ch->req[idx].x)
+		s3c_pl330_submit(ch, &ch->req[idx]);
+	else
+		s3c_pl330_submit(ch, &ch->req[1 - idx]);
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	if (ch->options & S3C2410_DMAF_AUTOSTART)
+		s3c2410_dma_ctrl(id, S3C2410_DMAOP_START);
+
+	return 0;
+
+enq_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+int s3c2410_dma_request(enum dma_ch id,
+			struct s3c2410_dma_client *client,
+			void *dev)
+{
+	struct s3c_pl330_dmac *dmac;
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = chan_acquire(id);
+	if (!ch) {
+		ret = -EBUSY;
+		goto req_exit;
+	}
+
+	dmac = ch->dmac;
+
+	ch->pl330_chan_id = pl330_request_channel(dmac->pi);
+	if (!ch->pl330_chan_id) {
+		chan_release(ch);
+		ret = -EBUSY;
+		goto req_exit;
+	}
+
+	ch->client = client;
+	ch->options = 0; /* Clear any option */
+	ch->callback_fn = NULL; /* Clear any callback */
+	ch->lrq = NULL;
+
+	ch->rqcfg.brst_size = 2; /* Default word size */
+	ch->rqcfg.swap = SWAP_NO;
+	ch->rqcfg.scctl = SCCTRL0; /* Noncacheable and nonbufferable */
+	ch->rqcfg.dcctl = DCCTRL0; /* Noncacheable and nonbufferable */
+	ch->rqcfg.privileged = 0;
+	ch->rqcfg.insnaccess = 0;
+
+	/* Set invalid direction */
+	ch->req[0].rqtype = DEVTODEV;
+	ch->req[1].rqtype = ch->req[0].rqtype;
+
+	ch->req[0].cfg = &ch->rqcfg;
+	ch->req[1].cfg = ch->req[0].cfg;
+
+	ch->req[0].peri = iface_of_dmac(dmac, id) - 1; /* Original index */
+	ch->req[1].peri = ch->req[0].peri;
+
+	ch->req[0].token = &ch->req[0];
+	ch->req[0].xfer_cb = s3c_pl330_rq0;
+	ch->req[1].token = &ch->req[1];
+	ch->req[1].xfer_cb = s3c_pl330_rq1;
+
+	ch->req[0].x = NULL;
+	ch->req[1].x = NULL;
+
+	/* Reset xfer list */
+	INIT_LIST_HEAD(&ch->xfer_list);
+	ch->xfer_head = NULL;
+
+req_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+int s3c2410_dma_free(enum dma_ch id, struct s3c2410_dma_client *client)
+{
+	struct s3c_pl330_chan *ch;
+	struct s3c_pl330_xfer *xfer;
+	unsigned long flags;
+	int ret = 0;
+	unsigned idx;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch))
+		goto free_exit;
+
+	/* Refuse if someone else wanted to free the channel */
+	if (ch->client != client) {
+		ret = -EBUSY;
+		goto free_exit;
+	}
+
+	/* Stop any active xfer, Flushe the queue and do callbacks */
+	pl330_chan_ctrl(ch->pl330_chan_id, PL330_OP_FLUSH);
+
+	/* Abort the submitted requests */
+	idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+
+	if (ch->req[idx].x) {
+		xfer = container_of(ch->req[idx].x,
+				struct s3c_pl330_xfer, px);
+
+		ch->req[idx].x = NULL;
+		del_from_queue(xfer);
+
+		spin_unlock_irqrestore(&res_lock, flags);
+		_finish_off(xfer, S3C2410_RES_ABORT, 1);
+		spin_lock_irqsave(&res_lock, flags);
+	}
+
+	if (ch->req[1 - idx].x) {
+		xfer = container_of(ch->req[1 - idx].x,
+				struct s3c_pl330_xfer, px);
+
+		ch->req[1 - idx].x = NULL;
+		del_from_queue(xfer);
+
+		spin_unlock_irqrestore(&res_lock, flags);
+		_finish_off(xfer, S3C2410_RES_ABORT, 1);
+		spin_lock_irqsave(&res_lock, flags);
+	}
+
+	/* Pluck and Abort the queued requests in order */
+	do {
+		xfer = get_from_queue(ch, 1);
+
+		spin_unlock_irqrestore(&res_lock, flags);
+		_finish_off(xfer, S3C2410_RES_ABORT, 1);
+		spin_lock_irqsave(&res_lock, flags);
+	} while (xfer);
+
+	ch->client = NULL;
+
+	pl330_release_channel(ch->pl330_chan_id);
+
+	ch->pl330_chan_id = NULL;
+
+	chan_release(ch);
+
+free_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+int s3c2410_dma_config(enum dma_ch id, int xferunit)
+{
+	struct s3c_pl330_chan *ch;
+	struct pl330_info *pi;
+	unsigned long flags;
+	int i, dbwidth, ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch)) {
+		ret = -EINVAL;
+		goto cfg_exit;
+	}
+
+	pi = ch->dmac->pi;
+	dbwidth = pi->pcfg.data_bus_width / 8;
+
+	/* Max size of xfer can be pcfg.data_bus_width */
+	if (xferunit > dbwidth) {
+		ret = -EINVAL;
+		goto cfg_exit;
+	}
+
+	i = 0;
+	while (xferunit != (1 << i))
+		i++;
+
+	/* If valid value */
+	if (xferunit == (1 << i))
+		ch->rqcfg.brst_size = i;
+	else
+		ret = -EINVAL;
+
+cfg_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+/* Options that are supported by this driver */
+#define S3C_PL330_FLAGS (S3C2410_DMAF_CIRCULAR | S3C2410_DMAF_AUTOSTART)
+
+int s3c2410_dma_setflags(enum dma_ch id, unsigned int options)
+{
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch) || options & ~(S3C_PL330_FLAGS))
+		ret = -EINVAL;
+	else
+		ch->options = options;
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);
+
+int s3c2410_dma_set_buffdone_fn(enum dma_ch id, s3c2410_dma_cbfn_t rtn)
+{
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch))
+		ret = -EINVAL;
+	else
+		ch->callback_fn = rtn;
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_devconfig(enum dma_ch id, enum s3c2410_dmasrc source,
+			  unsigned long address)
+{
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	ch = id_to_chan(id);
+
+	if (!ch || chan_free(ch)) {
+		ret = -EINVAL;
+		goto devcfg_exit;
+	}
+
+	switch (source) {
+	case S3C2410_DMASRC_HW: /* P->M */
+		ch->req[0].rqtype = DEVTOMEM;
+		ch->req[1].rqtype = DEVTOMEM;
+		ch->rqcfg.src_inc = 0;
+		ch->rqcfg.dst_inc = 1;
+		break;
+	case S3C2410_DMASRC_MEM: /* M->P */
+		ch->req[0].rqtype = MEMTODEV;
+		ch->req[1].rqtype = MEMTODEV;
+		ch->rqcfg.src_inc = 1;
+		ch->rqcfg.dst_inc = 0;
+		break;
+	default:
+		ret = -EINVAL;
+		goto devcfg_exit;
+	}
+
+	ch->sdaddr = address;
+
+devcfg_exit:
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+int s3c2410_dma_getposition(enum dma_ch id, dma_addr_t *src, dma_addr_t *dst)
+{
+	struct s3c_pl330_chan *ch = id_to_chan(id);
+	struct pl330_chanstatus status;
+	int ret;
+
+	if (!ch || chan_free(ch))
+		return -EINVAL;
+
+	ret = pl330_chan_status(ch->pl330_chan_id, &status);
+	if (ret < 0)
+		return ret;
+
+	*src = status.src_addr;
+	*dst = status.dst_addr;
+
+	return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+static irqreturn_t pl330_irq_handler(int irq, void *data)
+{
+	if (pl330_update(data))
+		return IRQ_HANDLED;
+	else
+		return IRQ_NONE;
+}
+
+static int pl330_probe(struct platform_device *pdev)
+{
+	struct s3c_pl330_dmac *s3c_pl330_dmac;
+	struct s3c_pl330_platdata *pl330pd;
+	struct pl330_info *pl330_info;
+	struct resource *res;
+	int i, ret, irq;
+
+	pl330pd = pdev->dev.platform_data;
+
+	/* Can't do without the list of _32_ peripherals */
+	if (!pl330pd || !pl330pd->peri) {
+		dev_err(&pdev->dev, "platform data missing!\n");
+		return -ENODEV;
+	}
+
+	pl330_info = kzalloc(sizeof(*pl330_info), GFP_KERNEL);
+	if (!pl330_info)
+		return -ENOMEM;
+
+	pl330_info->pl330_data = NULL;
+	pl330_info->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENODEV;
+		goto probe_err1;
+	}
+
+	request_mem_region(res->start, resource_size(res), pdev->name);
+
+	pl330_info->base = ioremap(res->start, resource_size(res));
+	if (!pl330_info->base) {
+		ret = -ENXIO;
+		goto probe_err2;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		ret = irq;
+		goto probe_err3;
+	}
+
+	ret = request_irq(irq, pl330_irq_handler, 0,
+			dev_name(&pdev->dev), pl330_info);
+	if (ret)
+		goto probe_err4;
+
+	ret = pl330_add(pl330_info);
+	if (ret)
+		goto probe_err5;
+
+	/* Allocate a new DMAC */
+	s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL);
+	if (!s3c_pl330_dmac) {
+		ret = -ENOMEM;
+		goto probe_err6;
+	}
+
+	/* Hook the info */
+	s3c_pl330_dmac->pi = pl330_info;
+
+	/* No busy channels */
+	s3c_pl330_dmac->busy_chan = 0;
+
+	s3c_pl330_dmac->kmcache = kmem_cache_create(dev_name(&pdev->dev),
+				sizeof(struct s3c_pl330_xfer), 0, 0, NULL);
+
+	if (!s3c_pl330_dmac->kmcache) {
+		ret = -ENOMEM;
+		goto probe_err7;
+	}
+
+	/* Get the list of peripherals */
+	s3c_pl330_dmac->peri = pl330pd->peri;
+
+	/* Attach to the list of DMACs */
+	list_add_tail(&s3c_pl330_dmac->node, &dmac_list);
+
+	/* Create a channel for each peripheral in the DMAC
+	 * that is, if it doesn't already exist
+	 */
+	for (i = 0; i < PL330_MAX_PERI; i++)
+		if (s3c_pl330_dmac->peri[i] != DMACH_MAX)
+			chan_add(s3c_pl330_dmac->peri[i]);
+
+	printk(KERN_INFO
+		"Loaded driver for PL330 DMAC-%d %s\n",	pdev->id, pdev->name);
+	printk(KERN_INFO
+		"\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
+		pl330_info->pcfg.data_buf_dep,
+		pl330_info->pcfg.data_bus_width / 8, pl330_info->pcfg.num_chan,
+		pl330_info->pcfg.num_peri, pl330_info->pcfg.num_events);
+
+	return 0;
+
+probe_err7:
+	kfree(s3c_pl330_dmac);
+probe_err6:
+	pl330_del(pl330_info);
+probe_err5:
+	free_irq(irq, pl330_info);
+probe_err4:
+probe_err3:
+	iounmap(pl330_info->base);
+probe_err2:
+	release_mem_region(res->start, resource_size(res));
+probe_err1:
+	kfree(pl330_info);
+
+	return ret;
+}
+
+static int pl330_remove(struct platform_device *pdev)
+{
+	struct s3c_pl330_dmac *dmac, *d;
+	struct s3c_pl330_chan *ch;
+	unsigned long flags;
+	int del, found;
+
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
+
+	spin_lock_irqsave(&res_lock, flags);
+
+	found = 0;
+	list_for_each_entry(d, &dmac_list, node)
+		if (d->pi->dev == &pdev->dev) {
+			found = 1;
+			break;
+		}
+
+	if (!found) {
+		spin_unlock_irqrestore(&res_lock, flags);
+		return 0;
+	}
+
+	dmac = d;
+
+	/* Remove all Channels that are managed only by this DMAC */
+	list_for_each_entry(ch, &chan_list, node) {
+
+		/* Only channels that are handled by this DMAC */
+		if (iface_of_dmac(dmac, ch->id))
+			del = 1;
+		else
+			continue;
+
+		/* Don't remove if some other DMAC has it too */
+		list_for_each_entry(d, &dmac_list, node)
+			if (d != dmac && iface_of_dmac(d, ch->id)) {
+				del = 0;
+				break;
+			}
+
+		if (del) {
+			spin_unlock_irqrestore(&res_lock, flags);
+			s3c2410_dma_free(ch->id, ch->client);
+			spin_lock_irqsave(&res_lock, flags);
+			list_del(&ch->node);
+			kfree(ch);
+		}
+	}
+
+	/* Remove the DMAC */
+	list_del(&dmac->node);
+	kfree(dmac);
+
+	spin_unlock_irqrestore(&res_lock, flags);
+
+	return 0;
+}
+
+static struct platform_driver pl330_driver = {
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "s3c-pl330",
+	},
+	.probe		= pl330_probe,
+	.remove		= pl330_remove,
+};
+
+static int __init pl330_init(void)
+{
+	return platform_driver_register(&pl330_driver);
+}
+module_init(pl330_init);
+
+static void __exit pl330_exit(void)
+{
+	platform_driver_unregister(&pl330_driver);
+	return;
+}
+module_exit(pl330_exit);
+
+MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("Driver for PL330 DMA Controller");
+MODULE_LICENSE("GPL");
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-samsung/wakeup-mask.c linux-libre-2.6.35-gnu/arch/arm/plat-samsung/wakeup-mask.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-samsung/wakeup-mask.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-samsung/wakeup-mask.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,47 @@
+/* arch/arm/plat-samsung/wakeup-mask.c
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Support for wakeup mask interrupts on newer SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/sysdev.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <plat/wakeup-mask.h>
+#include <plat/pm.h>
+
+void samsung_sync_wakemask(void __iomem *reg,
+			   struct samsung_wakeup_mask *mask, int nr_mask)
+{
+	struct irq_desc *desc;
+	u32 val;
+
+	val = __raw_readl(reg);
+
+	for (; nr_mask > 0; nr_mask--, mask++) {
+		if (mask->irq == NO_WAKEUP_IRQ) {
+			val |= mask->bit;
+			continue;
+		}
+
+		desc = irq_to_desc(mask->irq);
+
+		/* bit of a liberty to read this directly from irq_desc. */
+		if (desc->wake_depth > 0)
+			val &= ~mask->bit;
+		else
+			val |= mask->bit;
+	}
+
+	printk(KERN_INFO "wakemask %08x => %08x\n", __raw_readl(reg), val);
+	__raw_writel(val, reg);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/clock.c linux-libre-2.6.35-gnu/arch/arm/plat-spear/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/clock.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,435 @@
+/*
+ * arch/arm/plat-spear/clock.c
+ *
+ * Clock framework for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <mach/misc_regs.h>
+#include <plat/clock.h>
+
+static DEFINE_SPINLOCK(clocks_lock);
+static LIST_HEAD(root_clks);
+
+static void propagate_rate(struct list_head *);
+
+static int generic_clk_enable(struct clk *clk)
+{
+	unsigned int val;
+
+	if (!clk->en_reg)
+		return -EFAULT;
+
+	val = readl(clk->en_reg);
+	if (unlikely(clk->flags & RESET_TO_ENABLE))
+		val &= ~(1 << clk->en_reg_bit);
+	else
+		val |= 1 << clk->en_reg_bit;
+
+	writel(val, clk->en_reg);
+
+	return 0;
+}
+
+static void generic_clk_disable(struct clk *clk)
+{
+	unsigned int val;
+
+	if (!clk->en_reg)
+		return;
+
+	val = readl(clk->en_reg);
+	if (unlikely(clk->flags & RESET_TO_ENABLE))
+		val |= 1 << clk->en_reg_bit;
+	else
+		val &= ~(1 << clk->en_reg_bit);
+
+	writel(val, clk->en_reg);
+}
+
+/* generic clk ops */
+static struct clkops generic_clkops = {
+	.enable = generic_clk_enable,
+	.disable = generic_clk_disable,
+};
+
+/*
+ * clk_enable - inform the system when the clock source should be running.
+ * @clk: clock source
+ *
+ * If the clock can not be enabled/disabled, this should return success.
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	if (!clk || IS_ERR(clk))
+		return -EFAULT;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (clk->usage_count == 0) {
+		if (clk->ops && clk->ops->enable)
+			ret = clk->ops->enable(clk);
+	}
+	clk->usage_count++;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/*
+ * clk_disable - inform the system when the clock source is no longer required.
+ * @clk: clock source
+ *
+ * Inform the system that a clock source is no longer required by
+ * a driver and may be shut down.
+ *
+ * Implementation detail: if the clock source is shared between
+ * multiple drivers, clk_enable() calls must be balanced by the
+ * same number of clk_disable() calls for the clock source to be
+ * disabled.
+ */
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk || IS_ERR(clk))
+		return;
+
+	WARN_ON(clk->usage_count == 0);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	clk->usage_count--;
+	if (clk->usage_count == 0) {
+		if (clk->ops && clk->ops->disable)
+			clk->ops->disable(clk);
+	}
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/**
+ * clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
+ *		 This is only valid once the clock source has been enabled.
+ * @clk: clock source
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long flags, rate;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	rate = clk->rate;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/**
+ * clk_set_parent - set the parent clock source for this clock
+ * @clk: clock source
+ * @parent: parent clock source
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int i, found = 0, val = 0;
+	unsigned long flags;
+
+	if (!clk || IS_ERR(clk) || !parent || IS_ERR(parent))
+		return -EFAULT;
+	if (clk->usage_count)
+		return -EBUSY;
+	if (!clk->pclk_sel)
+		return -EPERM;
+	if (clk->pclk == parent)
+		return 0;
+
+	for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
+		if (clk->pclk_sel->pclk_info[i].pclk == parent) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (!found)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	/* reflect parent change in hardware */
+	val = readl(clk->pclk_sel->pclk_sel_reg);
+	val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
+	val |= clk->pclk_sel->pclk_info[i].pclk_mask << clk->pclk_sel_shift;
+	writel(val, clk->pclk_sel->pclk_sel_reg);
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	/* reflect parent change in software */
+	clk->recalc(clk);
+	propagate_rate(&clk->children);
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/* registers clock in platform clock framework */
+void clk_register(struct clk_lookup *cl)
+{
+	struct clk *clk = cl->clk;
+	unsigned long flags;
+
+	if (!clk || IS_ERR(clk))
+		return;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+
+	INIT_LIST_HEAD(&clk->children);
+	if (clk->flags & ALWAYS_ENABLED)
+		clk->ops = NULL;
+	else if (!clk->ops)
+		clk->ops = &generic_clkops;
+
+	/* root clock don't have any parents */
+	if (!clk->pclk && !clk->pclk_sel) {
+		list_add(&clk->sibling, &root_clks);
+		/* add clocks with only one parent to parent's children list */
+	} else if (clk->pclk && !clk->pclk_sel) {
+		list_add(&clk->sibling, &clk->pclk->children);
+	} else {
+		/* add clocks with > 1 parent to 1st parent's children list */
+		list_add(&clk->sibling,
+			 &clk->pclk_sel->pclk_info[0].pclk->children);
+	}
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	/* add clock to arm clockdev framework */
+	clkdev_add(cl);
+}
+
+/**
+ * propagate_rate - recalculate and propagate all clocks in list head
+ *
+ * Recalculates all root clocks in list head, which if the clock's .recalc is
+ * set correctly, should also propagate their rates.
+ */
+static void propagate_rate(struct list_head *lhead)
+{
+	struct clk *clkp, *_temp;
+
+	list_for_each_entry_safe(clkp, _temp, lhead, sibling) {
+		if (clkp->recalc)
+			clkp->recalc(clkp);
+		propagate_rate(&clkp->children);
+	}
+}
+
+/* returns current programmed clocks clock info structure */
+static struct pclk_info *pclk_info_get(struct clk *clk)
+{
+	unsigned int mask, i;
+	unsigned long flags;
+	struct pclk_info *info = NULL;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	mask = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
+			& clk->pclk_sel->pclk_sel_mask;
+
+	for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
+		if (clk->pclk_sel->pclk_info[i].pclk_mask == mask)
+			info = &clk->pclk_sel->pclk_info[i];
+	}
+	spin_unlock_irqrestore(&clocks_lock, flags);
+
+	return info;
+}
+
+/*
+ * Set pclk as cclk's parent and add clock sibling node to current parents
+ * children list
+ */
+static void change_parent(struct clk *cclk, struct clk *pclk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	list_del(&cclk->sibling);
+	list_add(&cclk->sibling, &pclk->children);
+
+	cclk->pclk = pclk;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/*
+ * calculates current programmed rate of pll1
+ *
+ * In normal mode
+ * rate = (2 * M[15:8] * Fin)/(N * 2^P)
+ *
+ * In Dithered mode
+ * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
+ */
+void pll1_clk_recalc(struct clk *clk)
+{
+	struct pll_clk_config *config = clk->private_data;
+	unsigned int num = 2, den = 0, val, mode = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	mode = (readl(config->mode_reg) >> PLL_MODE_SHIFT) &
+		PLL_MODE_MASK;
+
+	val = readl(config->cfg_reg);
+	/* calculate denominator */
+	den = (val >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK;
+	den = 1 << den;
+	den *= (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK;
+
+	/* calculate numerator & denominator */
+	if (!mode) {
+		/* Normal mode */
+		num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK;
+	} else {
+		/* Dithered mode */
+		num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK;
+		den *= 256;
+	}
+
+	clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/* calculates current programmed rate of ahb or apb bus */
+void bus_clk_recalc(struct clk *clk)
+{
+	struct bus_clk_config *config = clk->private_data;
+	unsigned int div;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	div = ((readl(config->reg) >> config->shift) & config->mask) + 1;
+	clk->rate = (unsigned long)clk->pclk->rate / div;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/*
+ * calculates current programmed rate of auxiliary synthesizers
+ * used by: UART, FIRDA
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2
+ * Fout2 = Fin * X/Y
+ *
+ * Selection of eqn 1 or 2 is programmed in register
+ */
+void aux_clk_recalc(struct clk *clk)
+{
+	struct aux_clk_config *config = clk->private_data;
+	struct pclk_info *pclk_info = NULL;
+	unsigned int num = 1, den = 1, val, eqn;
+	unsigned long flags;
+
+	/* get current programmed parent */
+	pclk_info = pclk_info_get(clk);
+	if (!pclk_info) {
+		spin_lock_irqsave(&clocks_lock, flags);
+		clk->pclk = NULL;
+		clk->rate = 0;
+		spin_unlock_irqrestore(&clocks_lock, flags);
+		return;
+	}
+
+	change_parent(clk, pclk_info->pclk);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (pclk_info->scalable) {
+		val = readl(config->synth_reg);
+
+		eqn = (val >> AUX_EQ_SEL_SHIFT) & AUX_EQ_SEL_MASK;
+		if (eqn == AUX_EQ1_SEL)
+			den *= 2;
+
+		/* calculate numerator */
+		num = (val >> AUX_XSCALE_SHIFT) & AUX_XSCALE_MASK;
+
+		/* calculate denominator */
+		den *= (val >> AUX_YSCALE_SHIFT) & AUX_YSCALE_MASK;
+		val = (((clk->pclk->rate/10000) * num) / den) * 10000;
+	} else
+		val = clk->pclk->rate;
+
+	clk->rate = val;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/*
+ * calculates current programmed rate of gpt synthesizers
+ * Fout from synthesizer can be given from below equations:
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+void gpt_clk_recalc(struct clk *clk)
+{
+	struct aux_clk_config *config = clk->private_data;
+	struct pclk_info *pclk_info = NULL;
+	unsigned int div = 1, val;
+	unsigned long flags;
+
+	pclk_info = pclk_info_get(clk);
+	if (!pclk_info) {
+		spin_lock_irqsave(&clocks_lock, flags);
+		clk->pclk = NULL;
+		clk->rate = 0;
+		spin_unlock_irqrestore(&clocks_lock, flags);
+		return;
+	}
+
+	change_parent(clk, pclk_info->pclk);
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	if (pclk_info->scalable) {
+		val = readl(config->synth_reg);
+		div += (val >> GPT_MSCALE_SHIFT) & GPT_MSCALE_MASK;
+		div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1);
+	}
+
+	clk->rate = (unsigned long)clk->pclk->rate / div;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/*
+ * Used for clocks that always have same value as the parent clock divided by a
+ * fixed divisor
+ */
+void follow_parent(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clocks_lock, flags);
+	clk->rate = clk->pclk->rate;
+	spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+/**
+ * recalc_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ */
+void recalc_root_clocks(void)
+{
+	propagate_rate(&root_clks);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/clkdev.h linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/clkdev.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/clkdev.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/clkdev.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-spear/include/plat/clkdev.h
+ *
+ * Clock Dev framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_CLKDEV_H
+#define __PLAT_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif /* __PLAT_CLKDEV_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/clock.h linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/clock.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/clock.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,126 @@
+/*
+ * arch/arm/plat-spear/include/plat/clock.h
+ *
+ * Clock framework definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_CLOCK_H
+#define __PLAT_CLOCK_H
+
+#include <linux/list.h>
+#include <asm/clkdev.h>
+#include <linux/types.h>
+
+/* clk structure flags */
+#define	ALWAYS_ENABLED		(1 << 0) /* clock always enabled */
+#define	RESET_TO_ENABLE		(1 << 1) /* reset register bit to enable clk */
+
+/**
+ * struct clkops - clock operations
+ * @enable: pointer to clock enable function
+ * @disable: pointer to clock disable function
+ */
+struct clkops {
+	int (*enable) (struct clk *);
+	void (*disable) (struct clk *);
+};
+
+/**
+ * struct pclk_info - parents info
+ * @pclk: pointer to parent clk
+ * @pclk_mask: value to be written for selecting this parent
+ * @scalable: Is parent scalable (1 - YES, 0 - NO)
+ */
+struct pclk_info {
+	struct clk *pclk;
+	u8 pclk_mask;
+	u8 scalable;
+};
+
+/**
+ * struct pclk_sel - parents selection configuration
+ * @pclk_info: pointer to array of parent clock info
+ * @pclk_count: number of parents
+ * @pclk_sel_reg: register for selecting a parent
+ * @pclk_sel_mask: mask for selecting parent (can be used to clear bits also)
+ */
+struct pclk_sel {
+	struct pclk_info *pclk_info;
+	u8 pclk_count;
+	unsigned int *pclk_sel_reg;
+	unsigned int pclk_sel_mask;
+};
+
+/**
+ * struct clk - clock structure
+ * @usage_count: num of users who enabled this clock
+ * @flags: flags for clock properties
+ * @rate: programmed clock rate in Hz
+ * @en_reg: clk enable/disable reg
+ * @en_reg_bit: clk enable/disable bit
+ * @ops: clk enable/disable ops - generic_clkops selected if NULL
+ * @recalc: pointer to clock rate recalculate function
+ * @pclk: current parent clk
+ * @pclk_sel: pointer to parent selection structure
+ * @pclk_sel_shift: register shift for selecting parent of this clock
+ * @children: list for childrens or this clock
+ * @sibling: node for list of clocks having same parents
+ * @private_data: clock specific private data
+ */
+struct clk {
+	unsigned int usage_count;
+	unsigned int flags;
+	unsigned long rate;
+	unsigned int *en_reg;
+	u8 en_reg_bit;
+	const struct clkops *ops;
+	void (*recalc) (struct clk *);
+
+	struct clk *pclk;
+	struct pclk_sel *pclk_sel;
+	unsigned int pclk_sel_shift;
+
+	struct list_head children;
+	struct list_head sibling;
+	void *private_data;
+};
+
+/* pll configuration structure */
+struct pll_clk_config {
+	unsigned int *mode_reg;
+	unsigned int *cfg_reg;
+};
+
+/* ahb and apb bus configuration structure */
+struct bus_clk_config {
+	unsigned int *reg;
+	unsigned int mask;
+	unsigned int shift;
+};
+
+/*
+ * Aux clk configuration structure: applicable to GPT, UART and FIRDA
+ */
+struct aux_clk_config {
+	unsigned int *synth_reg;
+};
+
+/* platform specific clock functions */
+void clk_register(struct clk_lookup *cl);
+void recalc_root_clocks(void);
+
+/* clock recalc functions */
+void follow_parent(struct clk *clk);
+void pll1_clk_recalc(struct clk *clk);
+void bus_clk_recalc(struct clk *clk);
+void gpt_clk_recalc(struct clk *clk);
+void aux_clk_recalc(struct clk *clk);
+
+#endif /* __PLAT_CLOCK_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/debug-macro.S linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/debug-macro.S
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/debug-macro.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/debug-macro.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/plat-spear/include/plat/debug-macro.S
+ *
+ * Debugging macro include header for spear platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/amba/serial.h>
+#include <mach/spear.h>
+
+		.macro	addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1					@ MMU enabled?
+		moveq	\rx, #SPEAR_DBG_UART_BASE		@ Physical base
+		movne	\rx, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
+		.endm
+
+		.macro	senduart, rd, rx
+		strb	\rd, [\rx, #UART01x_DR]			@ ASC_TX_BUFFER
+		.endm
+
+		.macro	waituart, rd, rx
+1001:		ldr	\rd, [\rx, #UART01x_FR]			@ FLAG REGISTER
+		tst	\rd, #UART01x_FR_TXFF			@ TX_FULL
+		bne	1001b
+		.endm
+
+		.macro	busyuart, rd, rx
+1002:		ldr	\rd, [\rx, #UART01x_FR]			@ FLAG REGISTER
+		tst	\rd, #UART011_FR_TXFE			@ TX_EMPTY
+		beq	1002b
+		.endm
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/gpio.h linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/gpio.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/gpio.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-spear/include/plat/gpio.h
+ *
+ * GPIO macros for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_GPIO_H
+#define __PLAT_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+#endif /* __PLAT_GPIO_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/io.h linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/io.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/io.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/io.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/plat-spear/include/plat/io.h
+ *
+ * IO definitions for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_IO_H
+#define __PLAT_IO_H
+
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+
+#define __io(a)			__typesafe_io(a)
+#define __mem_pci(a)		(a)
+
+#endif /* __PLAT_IO_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/memory.h linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/memory.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/memory.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/memory.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-spear/include/plat/memory.h
+ *
+ * Memory map for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_MEMORY_H
+#define __PLAT_MEMORY_H
+
+/* Physical DRAM offset */
+#define PHYS_OFFSET		UL(0x00000000)
+
+#endif /* __PLAT_MEMORY_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/padmux.h linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/padmux.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/padmux.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/padmux.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/plat-spear/include/plat/padmux.h
+ *
+ * SPEAr platform specific gpio pads muxing file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_PADMUX_H
+#define __PLAT_PADMUX_H
+
+#include <linux/types.h>
+
+/*
+ * struct pmx_reg: configuration structure for mode reg and mux reg
+ *
+ * offset: offset of mode reg
+ * mask: mask of mode reg
+ */
+struct pmx_reg {
+	u32 offset;
+	u32 mask;
+};
+
+/*
+ * struct pmx_dev_mode: configuration structure every group of modes of a device
+ *
+ * ids: all modes for this configuration
+ * mask: mask for supported mode
+ */
+struct pmx_dev_mode {
+	u32 ids;
+	u32 mask;
+};
+
+/*
+ * struct pmx_mode: mode definition structure
+ *
+ * name: mode name
+ * mask: mode mask
+ */
+struct pmx_mode {
+	char *name;
+	u32 id;
+	u32 mask;
+};
+
+/*
+ * struct pmx_dev: device definition structure
+ *
+ * name: device name
+ * modes: device configuration array for different modes supported
+ * mode_count: size of modes array
+ * is_active: is peripheral active/enabled
+ * enb_on_reset: if 1, mask bits to be cleared in reg otherwise to be set in reg
+ */
+struct pmx_dev {
+	char *name;
+	struct pmx_dev_mode *modes;
+	u8 mode_count;
+	bool is_active;
+	bool enb_on_reset;
+};
+
+/*
+ * struct pmx_driver: driver definition structure
+ *
+ * mode: mode to be set
+ * devs: array of pointer to pmx devices
+ * devs_count: ARRAY_SIZE of devs
+ * base: base address of soc config registers
+ * mode_reg: structure of mode config register
+ * mux_reg: structure of device mux config register
+ */
+struct pmx_driver {
+	struct pmx_mode *mode;
+	struct pmx_dev **devs;
+	u8 devs_count;
+	u32 *base;
+	struct pmx_reg mode_reg;
+	struct pmx_reg mux_reg;
+};
+
+/* pmx functions */
+int pmx_register(struct pmx_driver *driver);
+
+#endif /* __PLAT_PADMUX_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/shirq.h linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/shirq.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/shirq.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/shirq.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/plat-spear/include/plat/shirq.h
+ *
+ * SPEAr platform shared irq layer header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_SHIRQ_H
+#define __PLAT_SHIRQ_H
+
+#include <linux/irq.h>
+#include <linux/types.h>
+
+/*
+ * struct shirq_dev_config: shared irq device configuration
+ *
+ * virq: virtual irq number of device
+ * enb_mask: enable mask of device
+ * status_mask: status mask of device
+ * clear_mask: clear mask of device
+ */
+struct shirq_dev_config {
+	u32 virq;
+	u32 enb_mask;
+	u32 status_mask;
+	u32 clear_mask;
+};
+
+/*
+ * struct shirq_regs: shared irq register configuration
+ *
+ * base: base address of shared irq register
+ * enb_reg: enable register offset
+ * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt
+ * status_reg: status register offset
+ * status_reg_mask: status register valid mask
+ * clear_reg: clear register offset
+ * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt
+ */
+struct shirq_regs {
+	void __iomem *base;
+	u32 enb_reg;
+	u32 reset_to_enb;
+	u32 status_reg;
+	u32 status_reg_mask;
+	u32 clear_reg;
+	u32 reset_to_clear;
+};
+
+/*
+ * struct spear_shirq: shared irq structure
+ *
+ * irq: hardware irq number
+ * dev_config: array of device config structures which are using "irq" line
+ * dev_count: size of dev_config array
+ * regs: register configuration for shared irq block
+ */
+struct spear_shirq {
+	u32 irq;
+	struct shirq_dev_config *dev_config;
+	u32 dev_count;
+	struct shirq_regs regs;
+};
+
+int spear_shirq_register(struct spear_shirq *shirq);
+
+#endif /* __PLAT_SHIRQ_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/system.h linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/system.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/system.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/system.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-spear/include/plat/system.h
+ *
+ * SPEAr platform specific architecture functions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_SYSTEM_H
+#define __PLAT_SYSTEM_H
+
+#include <asm/hardware/sp810.h>
+#include <linux/io.h>
+#include <mach/spear.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	if (mode == 's') {
+		/* software reset, Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* hardware reset, Use on-chip reset capability */
+		sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
+	}
+}
+
+#endif /* __PLAT_SYSTEM_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/timex.h linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/timex.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/timex.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/timex.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-spear/include/plat/timex.h
+ *
+ * SPEAr platform specific timex definitions
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_TIMEX_H
+#define __PLAT_TIMEX_H
+
+#define CLOCK_TICK_RATE			48000000
+
+#endif /* __PLAT_TIMEX_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/uncompress.h linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/uncompress.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/uncompress.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/uncompress.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/plat-spear/include/plat/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/amba/serial.h>
+#include <mach/spear.h>
+
+#ifndef __PLAT_UNCOMPRESS_H
+#define __PLAT_UNCOMPRESS_H
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	void __iomem *base = (void __iomem *)SPEAR_DBG_UART_BASE;
+
+	while (readl(base + UART01x_FR) & UART01x_FR_TXFF)
+		barrier();
+
+	writel(c, base + UART01x_DR);
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif /* __PLAT_UNCOMPRESS_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/vmalloc.h linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/vmalloc.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/include/plat/vmalloc.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/include/plat/vmalloc.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/plat-spear/include/plat/vmalloc.h
+ *
+ * Defining Vmalloc area for SPEAr platform
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_VMALLOC_H
+#define __PLAT_VMALLOC_H
+
+#define VMALLOC_END		0xF0000000
+
+#endif /* __PLAT_VMALLOC_H */
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/Kconfig linux-libre-2.6.35-gnu/arch/arm/plat-spear/Kconfig
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/Kconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,31 @@
+#
+# SPEAr Platform configuration file
+#
+
+if PLAT_SPEAR
+
+choice
+	prompt "ST SPEAr Family"
+	default ARCH_SPEAR3XX
+
+config ARCH_SPEAR3XX
+	bool "SPEAr3XX"
+	select ARM_VIC
+	select CPU_ARM926T
+	help
+	  Supports for ARM's SPEAR3XX family
+
+config ARCH_SPEAR6XX
+	bool "SPEAr6XX"
+	select ARM_VIC
+	select CPU_ARM926T
+	help
+	  Supports for ARM's SPEAR6XX family
+
+endchoice
+
+# Adding SPEAr machine specific configuration files
+source "arch/arm/mach-spear3xx/Kconfig"
+source "arch/arm/mach-spear6xx/Kconfig"
+
+endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/Makefile linux-libre-2.6.35-gnu/arch/arm/plat-spear/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/Makefile	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,8 @@
+#
+# SPEAr Platform specific Makefile
+#
+
+# Common support
+obj-y	:= clock.o padmux.o time.o
+
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/padmux.c linux-libre-2.6.35-gnu/arch/arm/plat-spear/padmux.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/padmux.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/padmux.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/plat-spear/include/plat/padmux.c
+ *
+ * SPEAr platform specific gpio pads muxing source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <plat/padmux.h>
+
+/*
+ * struct pmx: pmx definition structure
+ *
+ * base: base address of configuration registers
+ * mode_reg: mode configurations
+ * mux_reg: muxing configurations
+ * active_mode: pointer to current active mode
+ */
+struct pmx {
+	u32 base;
+	struct pmx_reg mode_reg;
+	struct pmx_reg mux_reg;
+	struct pmx_mode *active_mode;
+};
+
+static struct pmx *pmx;
+
+/**
+ * pmx_mode_set - Enables an multiplexing mode
+ * @mode - pointer to pmx mode
+ *
+ * It will set mode of operation in hardware.
+ * Returns -ve on Err otherwise 0
+ */
+static int pmx_mode_set(struct pmx_mode *mode)
+{
+	u32 val;
+
+	if (!mode->name)
+		return -EFAULT;
+
+	pmx->active_mode = mode;
+
+	val = readl(pmx->base + pmx->mode_reg.offset);
+	val &= ~pmx->mode_reg.mask;
+	val |= mode->mask & pmx->mode_reg.mask;
+	writel(val, pmx->base + pmx->mode_reg.offset);
+
+	return 0;
+}
+
+/**
+ * pmx_devs_enable - Enables list of devices
+ * @devs - pointer to pmx device array
+ * @count - number of devices to enable
+ *
+ * It will enable pads for all required peripherals once and only once.
+ * If peripheral is not supported by current mode then request is rejected.
+ * Conflicts between peripherals are not handled and peripherals will be
+ * enabled in the order they are present in pmx_dev array.
+ * In case of conflicts last peripheral enalbed will be present.
+ * Returns -ve on Err otherwise 0
+ */
+static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
+{
+	u32 val, i, mask;
+
+	if (!count)
+		return -EINVAL;
+
+	val = readl(pmx->base + pmx->mux_reg.offset);
+	for (i = 0; i < count; i++) {
+		u8 j = 0;
+
+		if (!devs[i]->name || !devs[i]->modes) {
+			printk(KERN_ERR "padmux: dev name or modes is null\n");
+			continue;
+		}
+		/* check if peripheral exists in active mode */
+		if (pmx->active_mode) {
+			bool found = false;
+			for (j = 0; j < devs[i]->mode_count; j++) {
+				if (devs[i]->modes[j].ids &
+						pmx->active_mode->id) {
+					found = true;
+					break;
+				}
+			}
+			if (found == false) {
+				printk(KERN_ERR "%s device not available in %s"\
+						"mode\n", devs[i]->name,
+						pmx->active_mode->name);
+				continue;
+			}
+		}
+
+		/* enable peripheral */
+		mask = devs[i]->modes[j].mask & pmx->mux_reg.mask;
+		if (devs[i]->enb_on_reset)
+			val &= ~mask;
+		else
+			val |= mask;
+
+		devs[i]->is_active = true;
+	}
+	writel(val, pmx->base + pmx->mux_reg.offset);
+	kfree(pmx);
+
+	/* this will ensure that multiplexing can't be changed now */
+	pmx = (struct pmx *)-1;
+
+	return 0;
+}
+
+/**
+ * pmx_register - registers a platform requesting pad mux feature
+ * @driver - pointer to driver structure containing driver specific parameters
+ *
+ * Also this must be called only once. This will allocate memory for pmx
+ * structure, will call pmx_mode_set, will call pmx_devs_enable.
+ * Returns -ve on Err otherwise 0
+ */
+int pmx_register(struct pmx_driver *driver)
+{
+	int ret = 0;
+
+	if (pmx)
+		return -EPERM;
+	if (!driver->base || !driver->devs)
+		return -EFAULT;
+
+	pmx = kzalloc(sizeof(*pmx), GFP_KERNEL);
+	if (!pmx)
+		return -ENOMEM;
+
+	pmx->base = (u32)driver->base;
+	pmx->mode_reg.offset = driver->mode_reg.offset;
+	pmx->mode_reg.mask = driver->mode_reg.mask;
+	pmx->mux_reg.offset = driver->mux_reg.offset;
+	pmx->mux_reg.mask = driver->mux_reg.mask;
+
+	/* choose mode to enable */
+	if (driver->mode) {
+		ret = pmx_mode_set(driver->mode);
+		if (ret)
+			goto pmx_fail;
+	}
+	ret = pmx_devs_enable(driver->devs, driver->devs_count);
+	if (ret)
+		goto pmx_fail;
+
+	return 0;
+
+pmx_fail:
+	return ret;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/shirq.c linux-libre-2.6.35-gnu/arch/arm/plat-spear/shirq.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/shirq.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/shirq.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/plat-spear/shirq.c
+ *
+ * SPEAr platform shared irq layer source file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+#include <plat/shirq.h>
+
+struct spear_shirq *shirq;
+static DEFINE_SPINLOCK(lock);
+
+static void shirq_irq_mask(unsigned irq)
+{
+	struct spear_shirq *shirq = get_irq_chip_data(irq);
+	u32 val, id = irq - shirq->dev_config[0].virq;
+	unsigned long flags;
+
+	if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1)
+		return;
+
+	spin_lock_irqsave(&lock, flags);
+	val = readl(shirq->regs.base + shirq->regs.enb_reg);
+	if (shirq->regs.reset_to_enb)
+		val |= shirq->dev_config[id].enb_mask;
+	else
+		val &= ~(shirq->dev_config[id].enb_mask);
+	writel(val, shirq->regs.base + shirq->regs.enb_reg);
+	spin_unlock_irqrestore(&lock, flags);
+}
+
+static void shirq_irq_unmask(unsigned irq)
+{
+	struct spear_shirq *shirq = get_irq_chip_data(irq);
+	u32 val, id = irq - shirq->dev_config[0].virq;
+	unsigned long flags;
+
+	if ((shirq->regs.enb_reg == -1) || shirq->dev_config[id].enb_mask == -1)
+		return;
+
+	spin_lock_irqsave(&lock, flags);
+	val = readl(shirq->regs.base + shirq->regs.enb_reg);
+	if (shirq->regs.reset_to_enb)
+		val &= ~(shirq->dev_config[id].enb_mask);
+	else
+		val |= shirq->dev_config[id].enb_mask;
+	writel(val, shirq->regs.base + shirq->regs.enb_reg);
+	spin_unlock_irqrestore(&lock, flags);
+}
+
+static struct irq_chip shirq_chip = {
+	.name		= "spear_shirq",
+	.ack		= shirq_irq_mask,
+	.mask		= shirq_irq_mask,
+	.unmask		= shirq_irq_unmask,
+};
+
+static void shirq_handler(unsigned irq, struct irq_desc *desc)
+{
+	u32 i, val, mask;
+	struct spear_shirq *shirq = get_irq_data(irq);
+
+	desc->chip->ack(irq);
+	while ((val = readl(shirq->regs.base + shirq->regs.status_reg) &
+				shirq->regs.status_reg_mask)) {
+		for (i = 0; (i < shirq->dev_count) && val; i++) {
+			if (!(shirq->dev_config[i].status_mask & val))
+				continue;
+
+			generic_handle_irq(shirq->dev_config[i].virq);
+
+			/* clear interrupt */
+			val &= ~shirq->dev_config[i].status_mask;
+			if ((shirq->regs.clear_reg == -1) ||
+					shirq->dev_config[i].clear_mask == -1)
+				continue;
+			mask = readl(shirq->regs.base + shirq->regs.clear_reg);
+			if (shirq->regs.reset_to_clear)
+				mask &= ~shirq->dev_config[i].clear_mask;
+			else
+				mask |= shirq->dev_config[i].clear_mask;
+			writel(mask, shirq->regs.base + shirq->regs.clear_reg);
+		}
+	}
+	desc->chip->unmask(irq);
+}
+
+int spear_shirq_register(struct spear_shirq *shirq)
+{
+	int i;
+
+	if (!shirq || !shirq->dev_config || !shirq->regs.base)
+		return -EFAULT;
+
+	if (!shirq->dev_count)
+		return -EINVAL;
+
+	set_irq_chained_handler(shirq->irq, shirq_handler);
+	for (i = 0; i < shirq->dev_count; i++) {
+		set_irq_chip(shirq->dev_config[i].virq, &shirq_chip);
+		set_irq_handler(shirq->dev_config[i].virq, handle_simple_irq);
+		set_irq_flags(shirq->dev_config[i].virq, IRQF_VALID);
+		set_irq_chip_data(shirq->dev_config[i].virq, shirq);
+	}
+
+	set_irq_data(shirq->irq, shirq);
+	return 0;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-spear/time.c linux-libre-2.6.35-gnu/arch/arm/plat-spear/time.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-spear/time.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-spear/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,292 @@
+/*
+ * arch/arm/plat-spear/time.c
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Shiraz Hashim<shiraz.hashim@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/irq.h>
+#include <asm/mach/time.h>
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/spear.h>
+#include <mach/generic.h>
+
+/*
+ * We would use TIMER0 and TIMER1 as clockevent and clocksource.
+ * Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further
+ * they share same functional clock. Any change in one's functional clock will
+ * also affect other timer.
+ */
+
+#define CLKEVT	0	/* gpt0, channel0 as clockevent */
+#define CLKSRC	1	/* gpt0, channel1 as clocksource */
+
+/* Register offsets, x is channel number */
+#define CR(x)		((x) * 0x80 + 0x80)
+#define IR(x)		((x) * 0x80 + 0x84)
+#define LOAD(x)		((x) * 0x80 + 0x88)
+#define COUNT(x)	((x) * 0x80 + 0x8C)
+
+/* Reg bit definitions */
+#define CTRL_INT_ENABLE		0x0100
+#define CTRL_ENABLE		0x0020
+#define CTRL_ONE_SHOT		0x0010
+
+#define CTRL_PRESCALER1		0x0
+#define CTRL_PRESCALER2		0x1
+#define CTRL_PRESCALER4		0x2
+#define CTRL_PRESCALER8		0x3
+#define CTRL_PRESCALER16	0x4
+#define CTRL_PRESCALER32	0x5
+#define CTRL_PRESCALER64	0x6
+#define CTRL_PRESCALER128	0x7
+#define CTRL_PRESCALER256	0x8
+
+#define INT_STATUS		0x1
+
+static __iomem void *gpt_base;
+static struct clk *gpt_clk;
+
+static void clockevent_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *clk_event_dev);
+static int clockevent_next_event(unsigned long evt,
+				 struct clock_event_device *clk_event_dev);
+
+/*
+ * Following clocksource_set_clock and clockevent_set_clock picked
+ * from arch/mips/kernel/time.c
+ */
+
+void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
+{
+	u64 temp;
+	u32 shift;
+
+	/* Find a shift value */
+	for (shift = 32; shift > 0; shift--) {
+		temp = (u64) NSEC_PER_SEC << shift;
+		do_div(temp, clock);
+		if ((temp >> 32) == 0)
+			break;
+	}
+	cs->shift = shift;
+	cs->mult = (u32) temp;
+}
+
+void __init clockevent_set_clock(struct clock_event_device *cd,
+	unsigned int clock)
+{
+	u64 temp;
+	u32 shift;
+
+	/* Find a shift value */
+	for (shift = 32; shift > 0; shift--) {
+		temp = (u64) clock << shift;
+		do_div(temp, NSEC_PER_SEC);
+		if ((temp >> 32) == 0)
+			break;
+	}
+	cd->shift = shift;
+	cd->mult = (u32) temp;
+}
+
+static cycle_t clocksource_read_cycles(struct clocksource *cs)
+{
+	return (cycle_t) readw(gpt_base + COUNT(CLKSRC));
+}
+
+static struct clocksource clksrc = {
+	.name = "tmr1",
+	.rating = 200,		/* its a pretty decent clock */
+	.read = clocksource_read_cycles,
+	.mask = 0xFFFF,		/* 16 bits */
+	.mult = 0,		/* to be computed */
+	.shift = 0,		/* to be computed */
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void spear_clocksource_init(void)
+{
+	u32 tick_rate;
+	u16 val;
+
+	/* program the prescaler (/256)*/
+	writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC));
+
+	/* find out actual clock driving Timer */
+	tick_rate = clk_get_rate(gpt_clk);
+	tick_rate >>= CTRL_PRESCALER256;
+
+	writew(0xFFFF, gpt_base + LOAD(CLKSRC));
+
+	val = readw(gpt_base + CR(CLKSRC));
+	val &= ~CTRL_ONE_SHOT;	/* autoreload mode */
+	val |= CTRL_ENABLE ;
+	writew(val, gpt_base + CR(CLKSRC));
+
+	clocksource_set_clock(&clksrc, tick_rate);
+
+	/* register the clocksource */
+	clocksource_register(&clksrc);
+}
+
+static struct clock_event_device clkevt = {
+	.name = "tmr0",
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode = clockevent_set_mode,
+	.set_next_event = clockevent_next_event,
+	.shift = 0,	/* to be computed */
+};
+
+static void clockevent_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *clk_event_dev)
+{
+	u32 period;
+	u16 val;
+
+	/* stop the timer */
+	val = readw(gpt_base + CR(CLKEVT));
+	val &= ~CTRL_ENABLE;
+	writew(val, gpt_base + CR(CLKEVT));
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		period = clk_get_rate(gpt_clk) / HZ;
+		period >>= CTRL_PRESCALER16;
+		writew(period, gpt_base + LOAD(CLKEVT));
+
+		val = readw(gpt_base + CR(CLKEVT));
+		val &= ~CTRL_ONE_SHOT;
+		val |= CTRL_ENABLE | CTRL_INT_ENABLE;
+		writew(val, gpt_base + CR(CLKEVT));
+
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		val = readw(gpt_base + CR(CLKEVT));
+		val |= CTRL_ONE_SHOT;
+		writew(val, gpt_base + CR(CLKEVT));
+
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+
+		break;
+	default:
+		pr_err("Invalid mode requested\n");
+		break;
+	}
+}
+
+static int clockevent_next_event(unsigned long cycles,
+				 struct clock_event_device *clk_event_dev)
+{
+	u16 val;
+
+	writew(cycles, gpt_base + LOAD(CLKEVT));
+
+	val = readw(gpt_base + CR(CLKEVT));
+	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
+	writew(val, gpt_base + CR(CLKEVT));
+
+	return 0;
+}
+
+static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clkevt;
+
+	writew(INT_STATUS, gpt_base + IR(CLKEVT));
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction spear_timer_irq = {
+	.name = "timer",
+	.flags = IRQF_DISABLED | IRQF_TIMER,
+	.handler = spear_timer_interrupt
+};
+
+static void __init spear_clockevent_init(void)
+{
+	u32 tick_rate;
+
+	/* program the prescaler */
+	writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT));
+
+	tick_rate = clk_get_rate(gpt_clk);
+	tick_rate >>= CTRL_PRESCALER16;
+
+	clockevent_set_clock(&clkevt, tick_rate);
+
+	clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
+			&clkevt);
+	clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt);
+
+	clkevt.cpumask = cpumask_of(0);
+
+	clockevents_register_device(&clkevt);
+
+	setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
+}
+
+void __init spear_setup_timer(void)
+{
+	struct clk *pll3_clk;
+
+	if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
+		pr_err("%s:cannot get IO addr\n", __func__);
+		return;
+	}
+
+	gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
+	if (!gpt_base) {
+		pr_err("%s:ioremap failed for gpt\n", __func__);
+		goto err_mem;
+	}
+
+	gpt_clk = clk_get_sys("gpt0", NULL);
+	if (!gpt_clk) {
+		pr_err("%s:couldn't get clk for gpt\n", __func__);
+		goto err_iomap;
+	}
+
+	pll3_clk = clk_get(NULL, "pll3_48m_clk");
+	if (!pll3_clk) {
+		pr_err("%s:couldn't get PLL3 as parent for gpt\n", __func__);
+		goto err_iomap;
+	}
+
+	clk_set_parent(gpt_clk, pll3_clk);
+
+	spear_clockevent_init();
+	spear_clocksource_init();
+
+	return;
+
+err_iomap:
+	iounmap(gpt_base);
+
+err_mem:
+	release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
+}
+
+struct sys_timer spear_sys_timer = {
+	.init = spear_setup_timer,
+};
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-versatile/clock.c linux-libre-2.6.35-gnu/arch/arm/plat-versatile/clock.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-versatile/clock.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-versatile/clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,74 @@
+/*
+ *  linux/arch/arm/plat-versatile/clock.c
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <asm/hardware/icst.h>
+
+#include <mach/clkdev.h>
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	long ret = -EIO;
+	if (clk->ops && clk->ops->round)
+		ret = clk->ops->round(clk, rate);
+	return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EIO;
+	if (clk->ops && clk->ops->set)
+		ret = clk->ops->set(clk, rate);
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+long icst_clk_round(struct clk *clk, unsigned long rate)
+{
+	struct icst_vco vco;
+	vco = icst_hz_to_vco(clk->params, rate);
+	return icst_hz(clk->params, vco);
+}
+EXPORT_SYMBOL(icst_clk_round);
+
+int icst_clk_set(struct clk *clk, unsigned long rate)
+{
+	struct icst_vco vco;
+
+	vco = icst_hz_to_vco(clk->params, rate);
+	clk->rate = icst_hz(clk->params, vco);
+	clk->ops->setvco(clk, vco);
+
+	return 0;
+}
+EXPORT_SYMBOL(icst_clk_set);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-versatile/include/plat/clock.h linux-libre-2.6.35-gnu/arch/arm/plat-versatile/include/plat/clock.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-versatile/include/plat/clock.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-versatile/include/plat/clock.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,15 @@
+#ifndef PLAT_CLOCK_H
+#define PLAT_CLOCK_H
+
+#include <asm/hardware/icst.h>
+
+struct clk_ops {
+	long	(*round)(struct clk *, unsigned long);
+	int	(*set)(struct clk *, unsigned long);
+	void	(*setvco)(struct clk *, struct icst_vco);
+};
+
+int icst_clk_set(struct clk *, unsigned long);
+long icst_clk_round(struct clk *, unsigned long);
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-versatile/include/plat/timer-sp.h linux-libre-2.6.35-gnu/arch/arm/plat-versatile/include/plat/timer-sp.h
--- linux-libre-2.6.34-gnu/arch/arm/plat-versatile/include/plat/timer-sp.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-versatile/include/plat/timer-sp.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,2 @@
+void sp804_clocksource_init(void __iomem *);
+void sp804_clockevents_init(void __iomem *, unsigned int);
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-versatile/Makefile linux-libre-2.6.35-gnu/arch/arm/plat-versatile/Makefile
--- linux-libre-2.6.34-gnu/arch/arm/plat-versatile/Makefile	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-versatile/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,4 @@
+obj-y	:= clock.o
+obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
+obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o
+obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-versatile/sched-clock.c linux-libre-2.6.35-gnu/arch/arm/plat-versatile/sched-clock.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-versatile/sched-clock.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-versatile/sched-clock.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,53 @@
+/*
+ *  linux/arch/arm/plat-versatile/sched-clock.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/cnt32_to_63.h>
+#include <linux/io.h>
+#include <asm/div64.h>
+
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
+#ifdef VERSATILE_SYS_BASE
+#define REFCOUNTER	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
+#endif
+
+#ifdef REALVIEW_SYS_BASE
+#define REFCOUNTER	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
+#endif
+
+/*
+ * This is the Realview and Versatile sched_clock implementation.  This
+ * has a resolution of 41.7ns, and a maximum value of about 35583 days.
+ *
+ * The return value is guaranteed to be monotonic in that range as
+ * long as there is always less than 89 seconds between successive
+ * calls to this function.
+ */
+unsigned long long sched_clock(void)
+{
+	unsigned long long v = cnt32_to_63(readl(REFCOUNTER));
+
+	/* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
+	v *= 125<<1;
+	do_div(v, 3<<1);
+
+	return v;
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/plat-versatile/timer-sp.c linux-libre-2.6.35-gnu/arch/arm/plat-versatile/timer-sp.c
--- linux-libre-2.6.34-gnu/arch/arm/plat-versatile/timer-sp.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/arm/plat-versatile/timer-sp.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,156 @@
+/*
+ *  linux/arch/arm/plat-versatile/timer-sp.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/arm_timer.h>
+
+#include <plat/timer-sp.h>
+
+/*
+ * These timers are currently always setup to be clocked at 1MHz.
+ */
+#define TIMER_FREQ_KHZ	(1000)
+#define TIMER_RELOAD	(TIMER_FREQ_KHZ * 1000 / HZ)
+
+static void __iomem *clksrc_base;
+
+static cycle_t sp804_read(struct clocksource *cs)
+{
+	return ~readl(clksrc_base + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_sp804 = {
+	.name		= "timer3",
+	.rating		= 200,
+	.read		= sp804_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init sp804_clocksource_init(void __iomem *base)
+{
+	struct clocksource *cs = &clocksource_sp804;
+
+	clksrc_base = base;
+
+	/* setup timer 0 as free-running clocksource */
+	writel(0, clksrc_base + TIMER_CTRL);
+	writel(0xffffffff, clksrc_base + TIMER_LOAD);
+	writel(0xffffffff, clksrc_base + TIMER_VALUE);
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+		clksrc_base + TIMER_CTRL);
+
+	cs->mult = clocksource_khz2mult(TIMER_FREQ_KHZ, cs->shift);
+	clocksource_register(cs);
+}
+
+
+static void __iomem *clkevt_base;
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	/* clear the interrupt */
+	writel(1, clkevt_base + TIMER_INTCLR);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static void sp804_set_mode(enum clock_event_mode mode,
+	struct clock_event_device *evt)
+{
+	unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		writel(TIMER_RELOAD, clkevt_base + TIMER_LOAD);
+		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl |= TIMER_CTRL_ONESHOT;
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		break;
+	}
+
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+}
+
+static int sp804_set_next_event(unsigned long next,
+	struct clock_event_device *evt)
+{
+	unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
+
+	writel(next, clkevt_base + TIMER_LOAD);
+	writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+
+	return 0;
+}
+
+static struct clock_event_device sp804_clockevent = {
+	.name		= "timer0",
+	.shift		= 32,
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= sp804_set_mode,
+	.set_next_event	= sp804_set_next_event,
+	.rating		= 300,
+	.cpumask	= cpu_all_mask,
+};
+
+static struct irqaction sp804_timer_irq = {
+	.name		= "timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= sp804_timer_interrupt,
+	.dev_id		= &sp804_clockevent,
+};
+
+void __init sp804_clockevents_init(void __iomem *base, unsigned int timer_irq)
+{
+	struct clock_event_device *evt = &sp804_clockevent;
+
+	clkevt_base = base;
+
+	evt->irq = timer_irq;
+	evt->mult = div_sc(TIMER_FREQ_KHZ, NSEC_PER_MSEC, evt->shift);
+	evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
+	evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
+
+	setup_irq(timer_irq, &sp804_timer_irq);
+	clockevents_register_device(evt);
+}
diff -druN linux-libre-2.6.34-gnu/arch/arm/tools/mach-types linux-libre-2.6.35-gnu/arch/arm/tools/mach-types
--- linux-libre-2.6.34-gnu/arch/arm/tools/mach-types	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/tools/mach-types	2010-08-01 18:11:14.000000000 -0400
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat May 1 10:36:42 2010
+# Last update: Mon Jul 12 21:10:14 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1994,7 +1994,7 @@
 benzina			MACH_BENZINA		BENZINA			2003
 blaze			MACH_BLAZE		BLAZE			2004
 linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
-htckovsky		MACH_HTCVENUS		HTCVENUS		2006
+htckovsky		MACH_HTCKOVSKY		HTCKOVSKY		2006
 sony_prs505		MACH_SONY_PRS505	SONY_PRS505		2007
 hanlin_v3		MACH_HANLIN_V3		HANLIN_V3		2008
 sapphira		MACH_SAPPHIRA		SAPPHIRA		2009
@@ -2609,7 +2609,7 @@
 lexikon			MACH_LEXIKON		LEXIKON			2622
 mini2440v2		MACH_MINI2440V2		MINI2440V2		2623
 icontrol		MACH_ICONTROL		ICONTROL		2624
-sheevad			MACH_SHEEVAD		SHEEVAD			2625
+gplugd			MACH_SHEEVAD		SHEEVAD			2625
 qsd8x50a_st1_1		MACH_QSD8X50A_ST1_1	QSD8X50A_ST1_1		2626
 qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
 bee			MACH_BEE		BEE			2628
@@ -2804,3 +2804,149 @@
 snapper9g45		MACH_SNAPPER9G45	SNAPPER9G45		2817
 tam3517			MACH_TAM3517		TAM3517			2818
 pdc100			MACH_PDC100		PDC100			2819
+eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25	EUKREA_CPUIMX25		2820
+eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35	EUKREA_CPUIMX35		2821
+eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
+eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
+p565			MACH_P565		P565			2824
+acer_a4			MACH_ACER_A4		ACER_A4			2825
+davinci_dm368_bip	MACH_DAVINCI_DM368_BIP	DAVINCI_DM368_BIP	2826
+eshare			MACH_ESHARE		ESHARE			2827
+hw_omapl138_europa	MACH_HW_OMAPL138_EUROPA	HW_OMAPL138_EUROPA	2828
+wlbargn			MACH_WLBARGN		WLBARGN			2829
+bm170			MACH_BM170		BM170			2830
+netspace_mini_v2	MACH_NETSPACE_MINI_V2	NETSPACE_MINI_V2	2831
+netspace_plug_v2	MACH_NETSPACE_PLUG_V2	NETSPACE_PLUG_V2	2832
+siemens_l1		MACH_SIEMENS_L1		SIEMENS_L1		2833
+elv_lcu1		MACH_ELV_LCU1		ELV_LCU1		2834
+mcu1			MACH_MCU1		MCU1			2835
+omap3_tao3530		MACH_OMAP3_TAO3530	OMAP3_TAO3530		2836
+omap3_pcutouch		MACH_OMAP3_PCUTOUCH	OMAP3_PCUTOUCH		2837
+smdkc210		MACH_SMDKC210		SMDKC210		2838
+omap3_braillo		MACH_OMAP3_BRAILLO	OMAP3_BRAILLO		2839
+spyplug			MACH_SPYPLUG		SPYPLUG			2840
+ginger			MACH_GINGER		GINGER			2841
+tny_t3530		MACH_TNY_T3530		TNY_T3530		2842
+pca102			MACH_PCA102		PCA102			2843
+spade			MACH_SPADE		SPADE			2844
+mxc25_topaz		MACH_MXC25_TOPAZ	MXC25_TOPAZ		2845
+t5325			MACH_T5325		T5325			2846
+gw2361			MACH_GW2361		GW2361			2847
+elog			MACH_ELOG		ELOG			2848
+income			MACH_INCOME		INCOME			2849
+bcm589x			MACH_BCM589X		BCM589X			2850
+etna			MACH_ETNA		ETNA			2851
+hawks			MACH_HAWKS		HAWKS			2852
+meson			MACH_MESON		MESON			2853
+xsbase255		MACH_XSBASE255		XSBASE255		2854
+pvm2030			MACH_PVM2030		PVM2030			2855
+mioa502			MACH_MIOA502		MIOA502			2856
+vvbox_sdorig2		MACH_VVBOX_SDORIG2	VVBOX_SDORIG2		2857
+vvbox_sdlite2		MACH_VVBOX_SDLITE2	VVBOX_SDLITE2		2858
+vvbox_sdpro4		MACH_VVBOX_SDPRO4	VVBOX_SDPRO4		2859
+htc_spv_m700		MACH_HTC_SPV_M700	HTC_SPV_M700		2860
+mx257sx			MACH_MX257SX		MX257SX			2861
+goni			MACH_GONI		GONI			2862
+msm8x55_svlte_ffa	MACH_MSM8X55_SVLTE_FFA	MSM8X55_SVLTE_FFA	2863
+msm8x55_svlte_surf	MACH_MSM8X55_SVLTE_SURF	MSM8X55_SVLTE_SURF	2864
+quickstep		MACH_QUICKSTEP		QUICKSTEP		2865
+dmw96			MACH_DMW96		DMW96			2866
+hammerhead		MACH_HAMMERHEAD		HAMMERHEAD		2867
+trident			MACH_TRIDENT		TRIDENT			2868
+lightning		MACH_LIGHTNING		LIGHTNING		2869
+iconnect		MACH_ICONNECT		ICONNECT		2870
+autobot			MACH_AUTOBOT		AUTOBOT			2871
+coconut			MACH_COCONUT		COCONUT			2872
+durian			MACH_DURIAN		DURIAN			2873
+cayenne			MACH_CAYENNE		CAYENNE			2874
+fuji			MACH_FUJI		FUJI			2875
+synology_6282		MACH_SYNOLOGY_6282	SYNOLOGY_6282		2876
+em1sy			MACH_EM1SY		EM1SY			2877
+m502			MACH_M502		M502			2878
+matrix518		MACH_MATRIX518		MATRIX518		2879
+tiny_gurnard		MACH_TINY_GURNARD	TINY_GURNARD		2880
+spear1310		MACH_SPEAR1310		SPEAR1310		2881
+bv07			MACH_BV07		BV07			2882
+mxt_td61		MACH_MXT_TD61		MXT_TD61		2883
+openrd_ultimate		MACH_OPENRD_ULTIMATE	OPENRD_ULTIMATE		2884
+devixp			MACH_DEVIXP		DEVIXP			2885
+miccpt			MACH_MICCPT		MICCPT			2886
+mic256			MACH_MIC256		MIC256			2887
+as1167			MACH_AS1167		AS1167			2888
+omap3_ibiza		MACH_OMAP3_IBIZA	OMAP3_IBIZA		2889
+u5500			MACH_U5500		U5500			2890
+davinci_picto		MACH_DAVINCI_PICTO	DAVINCI_PICTO		2891
+mecha			MACH_MECHA		MECHA			2892
+bubba3			MACH_BUBBA3		BUBBA3			2893
+pupitre			MACH_PUPITRE		PUPITRE			2894
+tegra_harmony		MACH_TEGRA_HARMONY	TEGRA_HARMONY		2895
+tegra_vogue		MACH_TEGRA_VOGUE	TEGRA_VOGUE		2896
+tegra_e1165		MACH_TEGRA_E1165	TEGRA_E1165		2897
+simplenet		MACH_SIMPLENET		SIMPLENET		2898
+ec4350tbm		MACH_EC4350TBM		EC4350TBM		2899
+pec_tc			MACH_PEC_TC		PEC_TC			2900
+pec_hc2			MACH_PEC_HC2		PEC_HC2			2901
+esl_mobilis_a		MACH_ESL_MOBILIS_A	ESL_MOBILIS_A		2902
+esl_mobilis_b		MACH_ESL_MOBILIS_B	ESL_MOBILIS_B		2903
+esl_wave_a		MACH_ESL_WAVE_A		ESL_WAVE_A		2904
+esl_wave_b		MACH_ESL_WAVE_B		ESL_WAVE_B		2905
+unisense_mmm		MACH_UNISENSE_MMM	UNISENSE_MMM		2906
+blueshark		MACH_BLUESHARK		BLUESHARK		2907
+e10			MACH_E10		E10			2908
+app3k_robin		MACH_APP3K_ROBIN	APP3K_ROBIN		2909
+pov15hd			MACH_POV15HD		POV15HD			2910
+stella			MACH_STELLA		STELLA			2911
+linkstation_lschl	MACH_LINKSTATION_LSCHL	LINKSTATION_LSCHL	2913
+netwalker		MACH_NETWALKER		NETWALKER		2914
+acsx106			MACH_ACSX106		ACSX106			2915
+atlas5_c1		MACH_ATLAS5_C1		ATLAS5_C1		2916
+nsb3ast			MACH_NSB3AST		NSB3AST			2917
+gnet_slc		MACH_GNET_SLC		GNET_SLC		2918
+af4000			MACH_AF4000		AF4000			2919
+ark9431			MACH_ARK9431		ARK9431			2920
+fs_s5pc100		MACH_FS_S5PC100		FS_S5PC100		2921
+omap3505nova8		MACH_OMAP3505NOVA8	OMAP3505NOVA8		2922
+omap3621_edp1		MACH_OMAP3621_EDP1	OMAP3621_EDP1		2923
+oratisaes		MACH_ORATISAES		ORATISAES		2924
+smdkv310		MACH_SMDKV310		SMDKV310		2925
+siemens_l0		MACH_SIEMENS_L0		SIEMENS_L0		2926
+ventana			MACH_VENTANA		VENTANA			2927
+wm8505_7in_netbook	MACH_WM8505_7IN_NETBOOK	WM8505_7IN_NETBOOK	2928
+ec4350sdb		MACH_EC4350SDB		EC4350SDB		2929
+mimas			MACH_MIMAS		MIMAS			2930
+titan			MACH_TITAN		TITAN			2931
+craneboard		MACH_CRANEBOARD		CRANEBOARD		2932
+es2440			MACH_ES2440		ES2440			2933
+najay_a9263		MACH_NAJAY_A9263	NAJAY_A9263		2934
+htctornado		MACH_HTCTORNADO		HTCTORNADO		2935
+dimm_mx257		MACH_DIMM_MX257		DIMM_MX257		2936
+jigen301		MACH_JIGEN		JIGEN			2937
+smdk6450		MACH_SMDK6450		SMDK6450		2938
+meno_qng		MACH_MENO_QNG		MENO_QNG		2939
+ns2416			MACH_NS2416		NS2416			2940
+rpc353			MACH_RPC353		RPC353			2941
+tq6410			MACH_TQ6410		TQ6410			2942
+sky6410			MACH_SKY6410		SKY6410			2943
+dynasty			MACH_DYNASTY		DYNASTY			2944
+vivo			MACH_VIVO		VIVO			2945
+bury_bl7582		MACH_BURY_BL7582	BURY_BL7582		2946
+bury_bps5270		MACH_BURY_BPS5270	BURY_BPS5270		2947
+basi			MACH_BASI		BASI			2948
+tn200			MACH_TN200		TN200			2949
+c2mmi			MACH_C2MMI		C2MMI			2950
+meson_6236m		MACH_MESON_6236M	MESON_6236M		2951
+meson_8626m		MACH_MESON_8626M	MESON_8626M		2952
+tube			MACH_TUBE		TUBE			2953
+messina			MACH_MESSINA		MESSINA			2954
+mx50_arm2		MACH_MX50_ARM2		MX50_ARM2		2955
+cetus9263		MACH_CETUS9263		CETUS9263		2956
+brownstone		MACH_BROWNSTONE		BROWNSTONE		2957
+vmx25			MACH_VMX25		VMX25			2958
+vmx51			MACH_VMX51		VMX51			2959
+abacus			MACH_ABACUS		ABACUS			2960
+cm4745			MACH_CM4745		CM4745			2961
+oratislink		MACH_ORATISLINK		ORATISLINK		2962
+davinci_dm365_dvr	MACH_DAVINCI_DM365_DVR	DAVINCI_DM365_DVR	2963
+netviz			MACH_NETVIZ		NETVIZ			2964
+flexibity		MACH_FLEXIBITY		FLEXIBITY		2965
+wlan_computer		MACH_WLAN_COMPUTER	WLAN_COMPUTER		2966
diff -druN linux-libre-2.6.34-gnu/arch/arm/vfp/vfphw.S linux-libre-2.6.35-gnu/arch/arm/vfp/vfphw.S
--- linux-libre-2.6.34-gnu/arch/arm/vfp/vfphw.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/arm/vfp/vfphw.S	2010-08-01 18:11:14.000000000 -0400
@@ -277,7 +277,7 @@
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
+1:	mcrr	p11, 3, r0, r1, c\dr	@ fmdrr	r0, r1, d\dr
 	mov	pc, lr
 	.org	1b + 8
 	.endr
diff -druN linux-libre-2.6.34-gnu/arch/avr32/include/asm/atomic.h linux-libre-2.6.35-gnu/arch/avr32/include/asm/atomic.h
--- linux-libre-2.6.34-gnu/arch/avr32/include/asm/atomic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/avr32/include/asm/atomic.h	2010-08-01 18:11:14.000000000 -0400
@@ -19,7 +19,7 @@
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = i)
 
 /*
diff -druN linux-libre-2.6.34-gnu/arch/avr32/include/asm/ioctls.h linux-libre-2.6.35-gnu/arch/avr32/include/asm/ioctls.h
--- linux-libre-2.6.34-gnu/arch/avr32/include/asm/ioctls.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/avr32/include/asm/ioctls.h	2010-08-01 18:11:14.000000000 -0400
@@ -54,6 +54,9 @@
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
 
+#define TIOCGRS485      0x542E
+#define TIOCSRS485      0x542F
+
 #define FIONCLEX	0x5450
 #define FIOCLEX		0x5451
 #define FIOASYNC	0x5452
diff -druN linux-libre-2.6.34-gnu/arch/avr32/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/avr32/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/avr32/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/avr32/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,25 +1,7 @@
 #ifndef __ASM_AVR32_SCATTERLIST_H
 #define __ASM_AVR32_SCATTERLIST_H
 
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-   unsigned long	sg_magic;
-#endif
-    unsigned long	page_link;
-    unsigned int	offset;
-    dma_addr_t		dma_address;
-    unsigned int	length;
-};
-
-/* These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (0xffffffff)
 
diff -druN linux-libre-2.6.34-gnu/arch/avr32/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/avr32/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/avr32/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/avr32/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -81,7 +81,7 @@
 					   TIF_NEED_RESCHED */
 #define TIF_BREAKPOINT		4	/* enter monitor mode on return */
 #define TIF_SINGLE_STEP		5	/* single step in progress */
-#define TIF_MEMDIE		6
+#define TIF_MEMDIE		6	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
 #define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
 #define TIF_NOTIFY_RESUME	9	/* callback before returning to user */
diff -druN linux-libre-2.6.34-gnu/arch/avr32/kernel/time.c linux-libre-2.6.35-gnu/arch/avr32/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/avr32/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/avr32/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -110,17 +110,17 @@
 	.set_mode	= comparator_mode,
 };
 
+void read_persistent_clock(struct timespec *ts)
+{
+	ts->tv_sec = mktime(2007, 1, 1, 0, 0, 0);
+	ts->tv_nsec = 0;
+}
+
 void __init time_init(void)
 {
 	unsigned long counter_hz;
 	int ret;
 
-	xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
-	xtime.tv_nsec = 0;
-
-	set_normalized_timespec(&wall_to_monotonic,
-				-xtime.tv_sec, -xtime.tv_nsec);
-
 	/* figure rate for counter */
 	counter_hz = clk_get_rate(boot_cpu_data.clk);
 	counter.mult = clocksource_hz2mult(counter_hz, counter.shift);
diff -druN linux-libre-2.6.34-gnu/arch/avr32/mach-at32ap/include/mach/board.h linux-libre-2.6.35-gnu/arch/avr32/mach-at32ap/include/mach/board.h
--- linux-libre-2.6.34-gnu/arch/avr32/mach-at32ap/include/mach/board.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/avr32/mach-at32ap/include/mach/board.h	2010-08-01 18:11:14.000000000 -0400
@@ -5,6 +5,7 @@
 #define __ASM_ARCH_BOARD_H
 
 #include <linux/types.h>
+#include <linux/serial.h>
 
 #define GPIO_PIN_NONE	(-1)
 
@@ -35,6 +36,7 @@
 	short		use_dma_tx;	/* use transmit DMA? */
 	short		use_dma_rx;	/* use receive DMA? */
 	void __iomem	*regs;		/* virtual base address, if any */
+	struct serial_rs485	rs485;		/* rs485 settings */
 };
 void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
 struct platform_device *at32_add_device_usart(unsigned int id);
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/include/asm/bfin-global.h linux-libre-2.6.35-gnu/arch/blackfin/include/asm/bfin-global.h
--- linux-libre-2.6.34-gnu/arch/blackfin/include/asm/bfin-global.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/include/asm/bfin-global.h	2010-08-01 18:11:14.000000000 -0400
@@ -39,9 +39,15 @@
 extern unsigned long usecs_to_sclk(unsigned long usecs);
 
 struct pt_regs;
+#if defined(CONFIG_DEBUG_VERBOSE)
 extern void dump_bfin_process(struct pt_regs *regs);
 extern void dump_bfin_mem(struct pt_regs *regs);
 extern void dump_bfin_trace_buffer(void);
+#else
+#define dump_bfin_process(regs)
+#define dump_bfin_mem(regs)
+#define dump_bfin_trace_buffer()
+#endif
 
 /* init functions only */
 extern int init_arch_irq(void);
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/include/asm/bug.h linux-libre-2.6.35-gnu/arch/blackfin/include/asm/bug.h
--- linux-libre-2.6.34-gnu/arch/blackfin/include/asm/bug.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/include/asm/bug.h	2010-08-01 18:11:14.000000000 -0400
@@ -9,7 +9,12 @@
 
 #ifdef CONFIG_BUG
 
-#define BFIN_BUG_OPCODE	0xefcd
+/*
+ * This can be any undefined 16-bit opcode, meaning
+ * ((opcode & 0xc000) != 0xc000)
+ * Anything from 0x0001 to 0x000A (inclusive) will work
+ */
+#define BFIN_BUG_OPCODE	0x0001
 
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/include/asm/cache.h linux-libre-2.6.35-gnu/arch/blackfin/include/asm/cache.h
--- linux-libre-2.6.34-gnu/arch/blackfin/include/asm/cache.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/include/asm/cache.h	2010-08-01 18:11:14.000000000 -0400
@@ -15,6 +15,8 @@
 #define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
 #define SMP_CACHE_BYTES	L1_CACHE_BYTES
 
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
 #ifdef CONFIG_SMP
 #define __cacheline_aligned
 #else
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/include/asm/gpio.h linux-libre-2.6.35-gnu/arch/blackfin/include/asm/gpio.h
--- linux-libre-2.6.34-gnu/arch/blackfin/include/asm/gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/include/asm/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -167,23 +167,23 @@
 #endif
 
 #ifdef CONFIG_PM
+int bfin_pm_standby_ctrl(unsigned ctrl);
 
-unsigned int bfin_pm_standby_setup(void);
-void bfin_pm_standby_restore(void);
+static inline int bfin_pm_standby_setup(void)
+{
+	return bfin_pm_standby_ctrl(1);
+}
+
+static inline void bfin_pm_standby_restore(void)
+{
+	bfin_pm_standby_ctrl(0);
+}
 
 void bfin_gpio_pm_hibernate_restore(void);
 void bfin_gpio_pm_hibernate_suspend(void);
 
 #ifndef CONFIG_BF54x
-#define PM_WAKE_RISING	0x1
-#define PM_WAKE_FALLING	0x2
-#define PM_WAKE_HIGH	0x4
-#define PM_WAKE_LOW	0x8
-#define PM_WAKE_BOTH_EDGES	(PM_WAKE_RISING | PM_WAKE_FALLING)
-#define PM_WAKE_IGNORE	0xF0
-
-int gpio_pm_wakeup_request(unsigned gpio, unsigned char type);
-void gpio_pm_wakeup_free(unsigned gpio);
+int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl);
 
 struct gpio_port_s {
 	unsigned short data;
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/include/asm/pgtable.h linux-libre-2.6.35-gnu/arch/blackfin/include/asm/pgtable.h
--- linux-libre-2.6.34-gnu/arch/blackfin/include/asm/pgtable.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/include/asm/pgtable.h	2010-08-01 18:11:14.000000000 -0400
@@ -80,7 +80,8 @@
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
  */
-#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+#define ZERO_PAGE(vaddr)	virt_to_page(empty_zero_page)
+extern char empty_zero_page[];
 
 extern unsigned int kobjsize(const void *objp);
 
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/include/asm/pseudo_instructions.h linux-libre-2.6.35-gnu/arch/blackfin/include/asm/pseudo_instructions.h
--- linux-libre-2.6.34-gnu/arch/blackfin/include/asm/pseudo_instructions.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/blackfin/include/asm/pseudo_instructions.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,18 @@
+/*
+ * header file for pseudo instructions
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _BLACKFIN_PSEUDO_
+#define _BLACKFIN_PSEUDO_
+
+#include <linux/types.h>
+#include <asm/ptrace.h>
+
+extern bool execute_pseudodbg_assert(struct pt_regs *fp, unsigned int opcode);
+extern bool execute_pseudodbg(struct pt_regs *fp, unsigned int opcode);
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/blackfin/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/blackfin/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,27 +1,7 @@
 #ifndef _BLACKFIN_SCATTERLIST_H
 #define _BLACKFIN_SCATTERLIST_H
 
-#include <linux/mm.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-	dma_addr_t dma_address;
-	unsigned int length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD	(0xffffffff)
 
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/include/asm/string.h linux-libre-2.6.35-gnu/arch/blackfin/include/asm/string.h
--- linux-libre-2.6.34-gnu/arch/blackfin/include/asm/string.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/include/asm/string.h	2010-08-01 18:11:14.000000000 -0400
@@ -12,121 +12,16 @@
 #ifdef __KERNEL__		/* only set these up for kernel code */
 
 #define __HAVE_ARCH_STRCPY
-extern inline char *strcpy(char *dest, const char *src)
-{
-	char *xdest = dest;
-	char temp = 0;
-
-	__asm__ __volatile__ (
-		"1:"
-		"%2 = B [%1++] (Z);"
-		"B [%0++] = %2;"
-		"CC = %2;"
-		"if cc jump 1b (bp);"
-		: "+&a" (dest), "+&a" (src), "=&d" (temp)
-		:
-		: "memory", "CC");
-
-	return xdest;
-}
+extern char *strcpy(char *dest, const char *src);
 
 #define __HAVE_ARCH_STRNCPY
-extern inline char *strncpy(char *dest, const char *src, size_t n)
-{
-	char *xdest = dest;
-	char temp = 0;
-
-	if (n == 0)
-		return xdest;
-
-	__asm__ __volatile__ (
-		"1:"
-		"%3 = B [%1++] (Z);"
-		"B [%0++] = %3;"
-		"CC = %3;"
-		"if ! cc jump 2f;"
-		"%2 += -1;"
-		"CC = %2 == 0;"
-		"if ! cc jump 1b (bp);"
-		"jump 4f;"
-		"2:"
-		/* if src is shorter than n, we need to null pad bytes now */
-		"%3 = 0;"
-		"3:"
-		"%2 += -1;"
-		"CC = %2 == 0;"
-		"if cc jump 4f;"
-		"B [%0++] = %3;"
-		"jump 3b;"
-		"4:"
-		: "+&a" (dest), "+&a" (src), "+&da" (n), "=&d" (temp)
-		:
-		: "memory", "CC");
-
-	return xdest;
-}
+extern char *strncpy(char *dest, const char *src, size_t n);
 
 #define __HAVE_ARCH_STRCMP
-extern inline int strcmp(const char *cs, const char *ct)
-{
-	/* need to use int's here so the char's in the assembly don't get
-	 * sign extended incorrectly when we don't want them to be
-	 */
-	int __res1, __res2;
-
-	__asm__ __volatile__ (
-		"1:"
-		"%2 = B[%0++] (Z);"      /* get *cs */
-		"%3 = B[%1++] (Z);"      /* get *ct */
-		"CC = %2 == %3;"         /* compare a byte */
-		"if ! cc jump 2f;"       /* not equal, break out */
-		"CC = %2;"               /* at end of cs? */
-		"if cc jump 1b (bp);"    /* no, keep going */
-		"jump.s 3f;"             /* strings are equal */
-		"2:"
-		"%2 = %2 - %3;"          /* *cs - *ct */
-		"3:"
-		: "+&a" (cs), "+&a" (ct), "=&d" (__res1), "=&d" (__res2)
-		:
-		: "memory", "CC");
-
-	return __res1;
-}
+extern int strcmp(const char *cs, const char *ct);
 
 #define __HAVE_ARCH_STRNCMP
-extern inline int strncmp(const char *cs, const char *ct, size_t count)
-{
-	/* need to use int's here so the char's in the assembly don't get
-	 * sign extended incorrectly when we don't want them to be
-	 */
-	int __res1, __res2;
-
-	if (!count)
-		return 0;
-
-	__asm__ __volatile__ (
-		"1:"
-		"%3 = B[%0++] (Z);"      /* get *cs */
-		"%4 = B[%1++] (Z);"      /* get *ct */
-		"CC = %3 == %4;"         /* compare a byte */
-		"if ! cc jump 3f;"       /* not equal, break out */
-		"CC = %3;"               /* at end of cs? */
-		"if ! cc jump 4f;"       /* yes, all done */
-		"%2 += -1;"              /* no, adjust count */
-		"CC = %2 == 0;"
-		"if ! cc jump 1b;"       /* more to do, keep going */
-		"2:"
-		"%3 = 0;"                /* strings are equal */
-		"jump.s 4f;"
-		"3:"
-		"%3 = %3 - %4;"          /* *cs - *ct */
-		"4:"
-		: "+&a" (cs), "+&a" (ct), "+&da" (count), "=&d" (__res1), "=&d" (__res2)
-		:
-		: "memory", "CC");
-
-	return __res1;
-}
+extern int strncmp(const char *cs, const char *ct, size_t count);
 
 #define __HAVE_ARCH_MEMSET
 extern void *memset(void *s, int c, size_t count);
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/blackfin/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/blackfin/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -98,7 +98,7 @@
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE		4
+#define TIF_MEMDIE		4	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_FREEZE		6	/* is freezing for suspend */
 #define TIF_IRQ_SYNC		7	/* sync pipeline stage */
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/include/asm/tlbflush.h linux-libre-2.6.35-gnu/arch/blackfin/include/asm/tlbflush.h
--- linux-libre-2.6.34-gnu/arch/blackfin/include/asm/tlbflush.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/include/asm/tlbflush.h	2010-08-01 18:11:14.000000000 -0400
@@ -1 +1,2 @@
 #include <asm-generic/tlbflush.h>
+#define flush_tlb_kernel_range(s, e) do { } while (0)
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/include/asm/trace.h linux-libre-2.6.35-gnu/arch/blackfin/include/asm/trace.h
--- linux-libre-2.6.34-gnu/arch/blackfin/include/asm/trace.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/include/asm/trace.h	2010-08-01 18:11:14.000000000 -0400
@@ -23,6 +23,13 @@
 #ifndef __ASSEMBLY__
 extern unsigned long trace_buff_offset;
 extern unsigned long software_trace_buff[];
+#if defined(CONFIG_DEBUG_VERBOSE)
+extern void decode_address(char *buf, unsigned long address);
+extern bool get_instruction(unsigned int *val, unsigned short *address);
+#else
+static inline void decode_address(char *buf, unsigned long address) { }
+static inline bool get_instruction(unsigned int *val, unsigned short *address) { return false; }
+#endif
 
 /* Trace Macros for C files */
 
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/Kconfig linux-libre-2.6.35-gnu/arch/blackfin/Kconfig
--- linux-libre-2.6.34-gnu/arch/blackfin/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -348,7 +348,7 @@
 
 config MEM_MT48LC32M8A2_75
 	bool
-	depends on (BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
+	depends on (BFIN518F_EZBRD || BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
 	default y
 
 config MEM_MT48LC8M32B2B5_7
@@ -361,11 +361,6 @@
 	depends on (BFIN527_EZKIT || BFIN527_EZKIT_V2 || BFIN532_IP0X || BLACKSTAMP)
 	default y
 
-config MEM_MT48LC32M8A2_75
-	bool
-	depends on (BFIN518F_EZBRD)
-	default y
-
 config MEM_MT48H32M16LFCJ_75
 	bool
 	depends on (BFIN526_EZBRD)
@@ -791,6 +786,34 @@
 	  If enabled, the memcpy function is linked
 	  into L1 instruction memory. (less latency)
 
+config STRCMP_L1
+	bool "locate strcmp function in L1 Memory"
+	default y
+	help
+	  If enabled, the strcmp function is linked
+	  into L1 instruction memory (less latency).
+
+config STRNCMP_L1
+	bool "locate strncmp function in L1 Memory"
+	default y
+	help
+	  If enabled, the strncmp function is linked
+	  into L1 instruction memory (less latency).
+
+config STRCPY_L1
+	bool "locate strcpy function in L1 Memory"
+	default y
+	help
+	  If enabled, the strcpy function is linked
+	  into L1 instruction memory (less latency).
+
+config STRNCPY_L1
+	bool "locate strncpy function in L1 Memory"
+	default y
+	help
+	  If enabled, the strncpy function is linked
+	  into L1 instruction memory (less latency).
+
 config SYS_BFIN_SPINLOCK_L1
 	bool "Locate sys_bfin_spinlock function in L1 Memory"
 	default y
@@ -1187,32 +1210,6 @@
 	  If unsure, select "Sleep Deeper".
 endchoice
 
-config PM_WAKEUP_BY_GPIO
-	bool "Allow Wakeup from Standby by GPIO"
-	depends on PM && !BF54x
-
-config PM_WAKEUP_GPIO_NUMBER
-	int "GPIO number"
-	range 0 47
-	depends on PM_WAKEUP_BY_GPIO
-	default 2
-
-choice
-	prompt "GPIO Polarity"
-	depends on PM_WAKEUP_BY_GPIO
-	default PM_WAKEUP_GPIO_POLAR_H
-config  PM_WAKEUP_GPIO_POLAR_H
-	bool "Active High"
-config  PM_WAKEUP_GPIO_POLAR_L
-	bool "Active Low"
-config  PM_WAKEUP_GPIO_POLAR_EDGE_F
-	bool "Falling EDGE"
-config  PM_WAKEUP_GPIO_POLAR_EDGE_R
-	bool "Rising EDGE"
-config  PM_WAKEUP_GPIO_POLAR_EDGE_B
-	bool "Both EDGE"
-endchoice
-
 comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
 	depends on PM
 
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/Kconfig.debug linux-libre-2.6.35-gnu/arch/blackfin/Kconfig.debug
--- linux-libre-2.6.34-gnu/arch/blackfin/Kconfig.debug	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/Kconfig.debug	2010-08-01 18:11:14.000000000 -0400
@@ -238,7 +238,7 @@
 config NMI_WATCHDOG
 	bool "Enable NMI watchdog to help debugging lockup on SMP"
 	default n
-	depends on (SMP && !BFIN_SCRATCH_REG_RETN)
+	depends on SMP
 	help
 	  If any CPU in the system does not execute the period local timer
 	  interrupt for more than 5 seconds, then the NMI handler dumps debug
@@ -264,4 +264,13 @@
 	help
 	  Run some self tests of the isram driver code at boot.
 
+config BFIN_PSEUDODBG_INSNS
+	bool "Support pseudo debug instructions"
+	default n
+	help
+	  This option allows the kernel to emulate some pseudo instructions which
+	  allow simulator test cases to be run under Linux with no changes.
+
+	  Most people should say N here.
+
 endmenu
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/bfin_gpio.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/bfin_gpio.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/bfin_gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/bfin_gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -475,9 +475,7 @@
 
 
 #ifdef CONFIG_PM
-
 static unsigned short wakeup_map[GPIO_BANK_NUM];
-static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
 
 static const unsigned int sic_iwr_irqs[] = {
 #if defined(BF533_FAMILY)
@@ -514,112 +512,26 @@
 *************************************************************
 * MODIFICATION HISTORY :
 **************************************************************/
-int gpio_pm_wakeup_request(unsigned gpio, unsigned char type)
-{
-	unsigned long flags;
-
-	if ((check_gpio(gpio) < 0) || !type)
-		return -EINVAL;
-
-	local_irq_save_hw(flags);
-	wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
-	wakeup_flags_map[gpio] = type;
-	local_irq_restore_hw(flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(gpio_pm_wakeup_request);
-
-void gpio_pm_wakeup_free(unsigned gpio)
+int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
 {
 	unsigned long flags;
 
 	if (check_gpio(gpio) < 0)
-		return;
+		return -EINVAL;
 
 	local_irq_save_hw(flags);
-
-	wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
-
-	local_irq_restore_hw(flags);
-}
-EXPORT_SYMBOL(gpio_pm_wakeup_free);
-
-static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
-{
-	port_setup(gpio, GPIO_USAGE);
-	set_gpio_dir(gpio, 0);
-	set_gpio_inen(gpio, 1);
-
-	if (type & (PM_WAKE_RISING | PM_WAKE_FALLING))
-		set_gpio_edge(gpio, 1);
-	 else
-		set_gpio_edge(gpio, 0);
-
-	if ((type & (PM_WAKE_BOTH_EDGES)) == (PM_WAKE_BOTH_EDGES))
-		set_gpio_both(gpio, 1);
-	else
-		set_gpio_both(gpio, 0);
-
-	if ((type & (PM_WAKE_FALLING | PM_WAKE_LOW)))
-		set_gpio_polar(gpio, 1);
+	if (ctrl)
+		wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio);
 	else
-		set_gpio_polar(gpio, 0);
-
-	SSYNC();
-
-	return 0;
-}
-
-u32 bfin_pm_standby_setup(void)
-{
-	u16 bank, mask, i, gpio;
-
-	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-		mask = wakeup_map[gpio_bank(i)];
-		bank = gpio_bank(i);
-
-		gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb;
-		gpio_array[bank]->maskb = 0;
-
-		if (mask) {
-#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
-			gpio_bank_saved[bank].fer   = *port_fer[bank];
-#endif
-			gpio_bank_saved[bank].inen  = gpio_array[bank]->inen;
-			gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
-			gpio_bank_saved[bank].dir   = gpio_array[bank]->dir;
-			gpio_bank_saved[bank].edge  = gpio_array[bank]->edge;
-			gpio_bank_saved[bank].both  = gpio_array[bank]->both;
-			gpio_bank_saved[bank].reserved =
-						reserved_gpio_map[bank];
-
-			gpio = i;
-
-			while (mask) {
-				if ((mask & 1) && (wakeup_flags_map[gpio] !=
-					PM_WAKE_IGNORE)) {
-					reserved_gpio_map[gpio_bank(gpio)] |=
-							gpio_bit(gpio);
-					bfin_gpio_wakeup_type(gpio,
-						wakeup_flags_map[gpio]);
-					set_gpio_data(gpio, 0); /*Clear*/
-				}
-				gpio++;
-				mask >>= 1;
-			}
-
-			bfin_internal_set_wake(sic_iwr_irqs[bank], 1);
-			gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)];
-		}
-	}
+		wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
 
-	AWA_DUMMY_READ(maskb_set);
+	set_gpio_maskb(gpio, ctrl);
+	local_irq_restore_hw(flags);
 
 	return 0;
 }
 
-void bfin_pm_standby_restore(void)
+int bfin_pm_standby_ctrl(unsigned ctrl)
 {
 	u16 bank, mask, i;
 
@@ -627,24 +539,10 @@
 		mask = wakeup_map[gpio_bank(i)];
 		bank = gpio_bank(i);
 
-		if (mask) {
-#if defined(CONFIG_BF52x) || defined(BF537_FAMILY) || defined(CONFIG_BF51x)
-			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
-#endif
-			gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
-			gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
-			gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
-			gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
-			gpio_array[bank]->both  = gpio_bank_saved[bank].both;
-
-			reserved_gpio_map[bank] =
-					gpio_bank_saved[bank].reserved;
-			bfin_internal_set_wake(sic_iwr_irqs[bank], 0);
-		}
-
-		gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb;
+		if (mask)
+			bfin_internal_set_wake(sic_iwr_irqs[bank], ctrl);
 	}
-	AWA_DUMMY_READ(maskb);
+	return 0;
 }
 
 void bfin_gpio_pm_hibernate_suspend(void)
@@ -708,16 +606,11 @@
 #else /* CONFIG_BF54x */
 #ifdef CONFIG_PM
 
-u32 bfin_pm_standby_setup(void)
+int bfin_pm_standby_ctrl(unsigned ctrl)
 {
 	return 0;
 }
 
-void bfin_pm_standby_restore(void)
-{
-
-}
-
 void bfin_gpio_pm_hibernate_suspend(void)
 {
 	int i, bank;
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/bfin_ksyms.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/bfin_ksyms.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/bfin_ksyms.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/bfin_ksyms.c	2010-08-01 18:11:14.000000000 -0400
@@ -33,6 +33,18 @@
 EXPORT_SYMBOL(memchr);
 
 /*
+ * Because string functions are both inline and exported functions and
+ * folder arch/blackfin/lib is configured as a library path in Makefile,
+ * symbols exported in folder lib  is not linked into built-in.o but
+ * inlined only. In order to export string symbols to kernel module
+ * properly, they should be exported here.
+ */
+EXPORT_SYMBOL(strcpy);
+EXPORT_SYMBOL(strncpy);
+EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
+
+/*
  * libgcc functions - functions that are used internally by the
  * compiler...  (prototypes are not correct though, but that
  * doesn't really matter since they're not versioned).
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/dumpstack.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/dumpstack.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/dumpstack.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/dumpstack.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,174 @@
+/* Provide basic stack dumping functions
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/kernel.h>
+#include <linux/thread_info.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <asm/trace.h>
+
+/*
+ * Checks to see if the address pointed to is either a
+ * 16-bit CALL instruction, or a 32-bit CALL instruction
+ */
+static bool is_bfin_call(unsigned short *addr)
+{
+	unsigned int opcode;
+
+	if (!get_instruction(&opcode, addr))
+		return false;
+
+	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
+	    (opcode >= 0x0070 && opcode <= 0x0077) ||
+	    (opcode >= 0xE3000000 && opcode <= 0xE3FFFFFF))
+		return true;
+
+	return false;
+
+}
+
+void show_stack(struct task_struct *task, unsigned long *stack)
+{
+#ifdef CONFIG_PRINTK
+	unsigned int *addr, *endstack, *fp = 0, *frame;
+	unsigned short *ins_addr;
+	char buf[150];
+	unsigned int i, j, ret_addr, frame_no = 0;
+
+	/*
+	 * If we have been passed a specific stack, use that one otherwise
+	 *    if we have been passed a task structure, use that, otherwise
+	 *    use the stack of where the variable "stack" exists
+	 */
+
+	if (stack == NULL) {
+		if (task) {
+			/* We know this is a kernel stack, so this is the start/end */
+			stack = (unsigned long *)task->thread.ksp;
+			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
+		} else {
+			/* print out the existing stack info */
+			stack = (unsigned long *)&stack;
+			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+		}
+	} else
+		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+
+	printk(KERN_NOTICE "Stack info:\n");
+	decode_address(buf, (unsigned int)stack);
+	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+
+	if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
+		printk(KERN_NOTICE "Invalid stack pointer\n");
+		return;
+	}
+
+	/* First thing is to look for a frame pointer */
+	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
+		if (*addr & 0x1)
+			continue;
+		ins_addr = (unsigned short *)*addr;
+		ins_addr--;
+		if (is_bfin_call(ins_addr))
+			fp = addr - 1;
+
+		if (fp) {
+			/* Let's check to see if it is a frame pointer */
+			while (fp >= (addr - 1) && fp < endstack
+			       && fp && ((unsigned int) fp & 0x3) == 0)
+				fp = (unsigned int *)*fp;
+			if (fp == 0 || fp == endstack) {
+				fp = addr - 1;
+				break;
+			}
+			fp = 0;
+		}
+	}
+	if (fp) {
+		frame = fp;
+		printk(KERN_NOTICE " FP: (0x%p)\n", fp);
+	} else
+		frame = 0;
+
+	/*
+	 * Now that we think we know where things are, we
+	 * walk the stack again, this time printing things out
+	 * incase there is no frame pointer, we still look for
+	 * valid return addresses
+	 */
+
+	/* First time print out data, next time, print out symbols */
+	for (j = 0; j <= 1; j++) {
+		if (j)
+			printk(KERN_NOTICE "Return addresses in stack:\n");
+		else
+			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
+
+		fp = frame;
+		frame_no = 0;
+
+		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+		     addr < endstack; addr++, i++) {
+
+			ret_addr = 0;
+			if (!j && i % 8 == 0)
+				printk(KERN_NOTICE "%p:", addr);
+
+			/* if it is an odd address, or zero, just skip it */
+			if (*addr & 0x1 || !*addr)
+				goto print;
+
+			ins_addr = (unsigned short *)*addr;
+
+			/* Go back one instruction, and see if it is a CALL */
+			ins_addr--;
+			ret_addr = is_bfin_call(ins_addr);
+ print:
+			if (!j && stack == (unsigned long *)addr)
+				printk("[%08x]", *addr);
+			else if (ret_addr)
+				if (j) {
+					decode_address(buf, (unsigned int)*addr);
+					if (frame == addr) {
+						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
+						continue;
+					}
+					printk(KERN_NOTICE "    address : %s\n", buf);
+				} else
+					printk("<%08x>", *addr);
+			else if (fp == addr) {
+				if (j)
+					frame = addr+1;
+				else
+					printk("(%08x)", *addr);
+
+				fp = (unsigned int *)*addr;
+				frame_no++;
+
+			} else if (!j)
+				printk(" %08x ", *addr);
+		}
+		if (!j)
+			printk("\n");
+	}
+#endif
+}
+EXPORT_SYMBOL(show_stack);
+
+void dump_stack(void)
+{
+	unsigned long stack;
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int tflags;
+#endif
+	trace_buffer_save(tflags);
+	dump_bfin_trace_buffer();
+	show_stack(current, &stack);
+	trace_buffer_restore(tflags);
+}
+EXPORT_SYMBOL(dump_stack);
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/exception.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/exception.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/exception.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/exception.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,45 @@
+/* Basic functions for adding/removing custom exception handlers
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/module.h>
+#include <asm/irq_handler.h>
+
+int bfin_request_exception(unsigned int exception, void (*handler)(void))
+{
+	void (*curr_handler)(void);
+
+	if (exception > 0x3F)
+		return -EINVAL;
+
+	curr_handler = ex_table[exception];
+
+	if (curr_handler != ex_replaceable)
+		return -EBUSY;
+
+	ex_table[exception] = handler;
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_request_exception);
+
+int bfin_free_exception(unsigned int exception, void (*handler)(void))
+{
+	void (*curr_handler)(void);
+
+	if (exception > 0x3F)
+		return -EINVAL;
+
+	curr_handler = ex_table[exception];
+
+	if (curr_handler != handler)
+		return -EBUSY;
+
+	ex_table[exception] = ex_replaceable;
+
+	return 0;
+}
+EXPORT_SYMBOL(bfin_free_exception);
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/kgdb.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/kgdb.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/kgdb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/kgdb.c	2010-08-01 18:11:14.000000000 -0400
@@ -66,7 +66,7 @@
 	gdb_regs[BFIN_RETN] = regs->retn;
 	gdb_regs[BFIN_RETE] = regs->rete;
 	gdb_regs[BFIN_PC] = regs->pc;
-	gdb_regs[BFIN_CC] = 0;
+	gdb_regs[BFIN_CC] = (regs->astat >> 5) & 1;
 	gdb_regs[BFIN_EXTRA1] = 0;
 	gdb_regs[BFIN_EXTRA2] = 0;
 	gdb_regs[BFIN_EXTRA3] = 0;
@@ -439,6 +439,11 @@
 	return -EFAULT;
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
+{
+	regs->retx = ip;
+}
+
 int kgdb_arch_init(void)
 {
 	kgdb_single_step = 0;
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/Makefile linux-libre-2.6.35-gnu/arch/blackfin/kernel/Makefile
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -7,7 +7,8 @@
 obj-y := \
 	entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
 	sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \
-	fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o
+	fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o \
+	exception.o dumpstack.o
 
 ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y)
     obj-y += time-ts.o
@@ -29,6 +30,8 @@
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
 obj-$(CONFIG_EARLY_PRINTK)           += shadow_console.o
 obj-$(CONFIG_STACKTRACE)             += stacktrace.o
+obj-$(CONFIG_DEBUG_VERBOSE)          += trace.o
+obj-$(CONFIG_BFIN_PSEUDODBG_INSNS)   += pseudodbg.o
 
 # the kgdb test puts code into L2 and without linker
 # relaxation, we need to force long calls to/from it
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/pseudodbg.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/pseudodbg.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/pseudodbg.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/pseudodbg.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,191 @@
+/* The fake debug assert instructions
+ *
+ * Copyright 2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+
+const char * const greg_names[] = {
+	"R0",    "R1",      "R2",     "R3",    "R4",    "R5",    "R6",     "R7",
+	"P0",    "P1",      "P2",     "P3",    "P4",    "P5",    "SP",     "FP",
+	"I0",    "I1",      "I2",     "I3",    "M0",    "M1",    "M2",     "M3",
+	"B0",    "B1",      "B2",     "B3",    "L0",    "L1",    "L2",     "L3",
+	"A0.X",  "A0.W",    "A1.X",   "A1.W",  "<res>", "<res>", "ASTAT",  "RETS",
+	"<res>", "<res>",   "<res>",  "<res>", "<res>", "<res>", "<res>",  "<res>",
+	"LC0",   "LT0",     "LB0",    "LC1",   "LT1",   "LB1",   "CYCLES", "CYCLES2",
+	"USP",   "SEQSTAT", "SYSCFG", "RETI",  "RETX",  "RETN",  "RETE",   "EMUDAT",
+};
+
+static const char *get_allreg_name(int grp, int reg)
+{
+	return greg_names[(grp << 3) | reg];
+}
+
+/*
+ * Unfortunately, the pt_regs structure is not laid out the same way as the
+ * hardware register file, so we need to do some fix ups.
+ *
+ * CYCLES is not stored in the pt_regs structure - so, we just read it from
+ * the hardware.
+ *
+ * Don't support:
+ *  - All reserved registers
+ *  - All in group 7 are (supervisors only)
+ */
+
+static bool fix_up_reg(struct pt_regs *fp, long *value, int grp, int reg)
+{
+	long *val = &fp->r0;
+	unsigned long tmp;
+
+	/* Only do Dregs and Pregs for now */
+	if (grp == 5 ||
+	   (grp == 4 && (reg == 4 || reg == 5)) ||
+	   (grp == 7))
+		return false;
+
+	if (grp == 0 || (grp == 1 && reg < 6))
+		val -= (reg + 8 * grp);
+	else if (grp == 1 && reg == 6)
+		val = &fp->usp;
+	else if (grp == 1 && reg == 7)
+		val = &fp->fp;
+	else if (grp == 2) {
+		val = &fp->i0;
+		val -= reg;
+	} else if (grp == 3 && reg >= 4) {
+		val = &fp->l0;
+		val -= (reg - 4);
+	} else if (grp == 3 && reg < 4) {
+		val = &fp->b0;
+		val -= reg;
+	} else if (grp == 4 && reg < 4) {
+		val = &fp->a0x;
+		val -= reg;
+	} else if (grp == 4 && reg == 6)
+		val = &fp->astat;
+	else if (grp == 4 && reg == 7)
+		val = &fp->rets;
+	else if (grp == 6 && reg < 6) {
+		val = &fp->lc0;
+		val -= reg;
+	} else if (grp == 6 && reg == 6) {
+		__asm__ __volatile__("%0 = cycles;\n" : "=d"(tmp));
+		val = &tmp;
+	} else if (grp == 6 && reg == 7) {
+		__asm__ __volatile__("%0 = cycles2;\n" : "=d"(tmp));
+		val = &tmp;
+	}
+
+	*value = *val;
+	return true;
+
+}
+
+#define PseudoDbg_Assert_opcode         0xf0000000
+#define PseudoDbg_Assert_expected_bits  0
+#define PseudoDbg_Assert_expected_mask  0xffff
+#define PseudoDbg_Assert_regtest_bits   16
+#define PseudoDbg_Assert_regtest_mask   0x7
+#define PseudoDbg_Assert_grp_bits       19
+#define PseudoDbg_Assert_grp_mask       0x7
+#define PseudoDbg_Assert_dbgop_bits     22
+#define PseudoDbg_Assert_dbgop_mask     0x3
+#define PseudoDbg_Assert_dontcare_bits  24
+#define PseudoDbg_Assert_dontcare_mask  0x7
+#define PseudoDbg_Assert_code_bits      27
+#define PseudoDbg_Assert_code_mask      0x1f
+
+/*
+ * DBGA - debug assert
+ */
+bool execute_pseudodbg_assert(struct pt_regs *fp, unsigned int opcode)
+{
+	int expected = ((opcode >> PseudoDbg_Assert_expected_bits) & PseudoDbg_Assert_expected_mask);
+	int dbgop    = ((opcode >> (PseudoDbg_Assert_dbgop_bits)) & PseudoDbg_Assert_dbgop_mask);
+	int grp      = ((opcode >> (PseudoDbg_Assert_grp_bits)) & PseudoDbg_Assert_grp_mask);
+	int regtest  = ((opcode >> (PseudoDbg_Assert_regtest_bits)) & PseudoDbg_Assert_regtest_mask);
+	long value;
+
+	if ((opcode & 0xFF000000) != PseudoDbg_Assert_opcode)
+		return false;
+
+	if (!fix_up_reg(fp, &value, grp, regtest))
+		return false;
+
+	if (dbgop == 0 || dbgop == 2) {
+		/* DBGA ( regs_lo , uimm16 ) */
+		/* DBGAL ( regs , uimm16 ) */
+		if (expected != (value & 0xFFFF)) {
+			pr_notice("DBGA (%s.L,0x%x) failure, got 0x%x\n",
+				get_allreg_name(grp, regtest),
+				expected, (unsigned int)(value & 0xFFFF));
+			return false;
+		}
+
+	} else if (dbgop == 1 || dbgop == 3) {
+		/* DBGA ( regs_hi , uimm16 ) */
+		/* DBGAH ( regs , uimm16 ) */
+		if (expected != ((value >> 16) & 0xFFFF)) {
+			pr_notice("DBGA (%s.H,0x%x) failure, got 0x%x\n",
+				get_allreg_name(grp, regtest),
+				expected, (unsigned int)((value >> 16) & 0xFFFF));
+			return false;
+		}
+	}
+
+	fp->pc += 4;
+	return true;
+}
+
+#define PseudoDbg_opcode        0xf8000000
+#define PseudoDbg_reg_bits      0
+#define PseudoDbg_reg_mask      0x7
+#define PseudoDbg_grp_bits      3
+#define PseudoDbg_grp_mask      0x7
+#define PseudoDbg_fn_bits       6
+#define PseudoDbg_fn_mask       0x3
+#define PseudoDbg_code_bits     8
+#define PseudoDbg_code_mask     0xff
+
+/*
+ * DBG - debug (dump a register value out)
+ */
+bool execute_pseudodbg(struct pt_regs *fp, unsigned int opcode)
+{
+	int grp, fn, reg;
+	long value, value1;
+
+	if ((opcode & 0xFF000000) != PseudoDbg_opcode)
+		return false;
+
+	opcode >>= 16;
+	grp = ((opcode >> PseudoDbg_grp_bits) & PseudoDbg_reg_mask);
+	fn  = ((opcode >> PseudoDbg_fn_bits)  & PseudoDbg_fn_mask);
+	reg = ((opcode >> PseudoDbg_reg_bits) & PseudoDbg_reg_mask);
+
+	if (fn == 3 && (reg == 0 || reg == 1)) {
+		if (!fix_up_reg(fp, &value, 4, 2 * reg))
+			return false;
+		if (!fix_up_reg(fp, &value1, 4, 2 * reg + 1))
+			return false;
+
+		pr_notice("DBG A%i = %02lx%08lx\n", reg, value & 0xFF, value1);
+		fp->pc += 2;
+		return true;
+
+	} else if (fn == 0) {
+		if (!fix_up_reg(fp, &value, grp, reg))
+			return false;
+
+		pr_notice("DBG %s = %08lx\n", get_allreg_name(grp, reg), value);
+		fp->pc += 2;
+		return true;
+	}
+
+	return false;
+}
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/ptrace.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/ptrace.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/ptrace.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/ptrace.c	2010-08-01 18:11:14.000000000 -0400
@@ -292,28 +292,6 @@
 			break;
 		}
 
-#ifdef CONFIG_BINFMT_ELF_FDPIC
-	case PTRACE_GETFDPIC: {
-		unsigned long tmp = 0;
-
-		switch (addr) {
-		case_PTRACE_GETFDPIC_EXEC:
-		case PTRACE_GETFDPIC_EXEC:
-			tmp = child->mm->context.exec_fdpic_loadmap;
-			break;
-		case_PTRACE_GETFDPIC_INTERP:
-		case PTRACE_GETFDPIC_INTERP:
-			tmp = child->mm->context.interp_fdpic_loadmap;
-			break;
-		default:
-			break;
-		}
-
-		ret = put_user(tmp, datap);
-		break;
-	}
-#endif
-
 		/* when I and D space are separate, this will have to be fixed. */
 	case PTRACE_POKEDATA:
 		pr_debug("ptrace: PTRACE_PEEKDATA\n");
@@ -357,8 +335,14 @@
 	case PTRACE_PEEKUSR:
 		switch (addr) {
 #ifdef CONFIG_BINFMT_ELF_FDPIC	/* backwards compat */
-		case PT_FDPIC_EXEC:   goto case_PTRACE_GETFDPIC_EXEC;
-		case PT_FDPIC_INTERP: goto case_PTRACE_GETFDPIC_INTERP;
+		case PT_FDPIC_EXEC:
+			request = PTRACE_GETFDPIC;
+			addr = PTRACE_GETFDPIC_EXEC;
+			goto case_default;
+		case PT_FDPIC_INTERP:
+			request = PTRACE_GETFDPIC;
+			addr = PTRACE_GETFDPIC_INTERP;
+			goto case_default;
 #endif
 		default:
 			ret = get_reg(child, addr, datap);
@@ -385,6 +369,7 @@
 					     0, sizeof(struct pt_regs),
 					     (const void __user *)data);
 
+	case_default:
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/setup.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/setup.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2009 Analog Devices Inc.
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -925,7 +925,7 @@
 	else if (_bfin_swrst & RESET_SOFTWARE)
 		printk(KERN_NOTICE "Reset caused by Software reset\n");
 
-	printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
+	printk(KERN_INFO "Blackfin support (C) 2004-2010 Analog Devices, Inc.\n");
 	if (bfin_compiled_revid() == 0xffff)
 		printk(KERN_INFO "Compiled for ADSP-%s Rev any, running on 0.%d\n", CPU, bfin_revid());
 	else if (bfin_compiled_revid() == -1)
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/sys_bfin.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/sys_bfin.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/sys_bfin.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/sys_bfin.c	2010-08-01 18:11:14.000000000 -0400
@@ -47,3 +47,26 @@
 }
 EXPORT_SYMBOL(get_fb_unmapped_area);
 #endif
+
+/* Needed for legacy userspace atomic emulation */
+static DEFINE_SPINLOCK(bfin_spinlock_lock);
+
+#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
+__attribute__((l1_text))
+#endif
+asmlinkage int sys_bfin_spinlock(int *p)
+{
+	int ret, tmp = 0;
+
+	spin_lock(&bfin_spinlock_lock); /* This would also hold kernel preemption. */
+	ret = get_user(tmp, p);
+	if (likely(ret == 0)) {
+		if (unlikely(tmp))
+			ret = 1;
+		else
+			put_user(1, p);
+	}
+	spin_unlock(&bfin_spinlock_lock);
+
+	return ret;
+}
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/time.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -112,11 +112,6 @@
 }
 #endif
 
-static inline int set_rtc_mmss(unsigned long nowtime)
-{
-	return 0;
-}
-
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
@@ -126,29 +121,8 @@
 #endif
 irqreturn_t timer_interrupt(int irq, void *dummy)
 {
-	/* last time the cmos clock got updated */
-	static long last_rtc_update;
-
 	write_seqlock(&xtime_lock);
 	do_timer(1);
-
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / NSEC_PER_USEC) >=
-	    500000 - ((unsigned)TICK_SIZE) / 2
-	    && (xtime.tv_nsec / NSEC_PER_USEC) <=
-	    500000 + ((unsigned)TICK_SIZE) / 2) {
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			/* Do it again in 60s. */
-			last_rtc_update = xtime.tv_sec - 600;
-	}
 	write_sequnlock(&xtime_lock);
 
 #ifdef CONFIG_IPIPE
@@ -161,10 +135,15 @@
 	return IRQ_HANDLED;
 }
 
-void __init time_init(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60;	/* 1 Jan 2007 */
+	ts->tv_sec = secs_since_1970;
+	ts->tv_nsec = 0;
+}
 
+void __init time_init(void)
+{
 #ifdef CONFIG_RTC_DRV_BFIN
 	/* [#2663] hack to filter junk RTC values that would cause
 	 * userspace to have to deal with time values greater than
@@ -176,11 +155,5 @@
 	}
 #endif
 
-	/* Initialize xtime. From now on, xtime is updated with timer interrupts */
-	xtime.tv_sec = secs_since_1970;
-	xtime.tv_nsec = 0;
-
-	wall_to_monotonic.tv_sec = -xtime.tv_sec;
-
 	time_sched_init(timer_interrupt);
 }
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/time-ts.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/time-ts.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/time-ts.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/time-ts.c	2010-08-01 18:11:14.000000000 -0400
@@ -353,9 +353,15 @@
 #endif /* CONFIG_TICKSOURCE_CORETMR */
 
 
-void __init time_init(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60;	/* 1 Jan 2007 */
+	ts->tv_sec = secs_since_1970;
+	ts->tv_nsec = 0;
+}
+
+void __init time_init(void)
+{
 
 #ifdef CONFIG_RTC_DRV_BFIN
 	/* [#2663] hack to filter junk RTC values that would cause
@@ -368,11 +374,6 @@
 	}
 #endif
 
-	/* Initialize xtime. From now on, xtime is updated with timer interrupts */
-	xtime.tv_sec = secs_since_1970;
-	xtime.tv_nsec = 0;
-	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
-
 	bfin_cs_cycles_init();
 	bfin_cs_gptimer0_init();
 
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/trace.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/trace.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/trace.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/trace.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,981 @@
+/* provide some functions which dump the trace buffer, in a nice way for people
+ * to read it, and understand what is going on
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <linux/kernel.h>
+#include <linux/hardirq.h>
+#include <linux/thread_info.h>
+#include <linux/mm.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <asm/dma.h>
+#include <asm/trace.h>
+#include <asm/fixed_code.h>
+#include <asm/traps.h>
+#include <asm/irq_handler.h>
+
+void decode_address(char *buf, unsigned long address)
+{
+	struct task_struct *p;
+	struct mm_struct *mm;
+	unsigned long flags, offset;
+	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
+	struct rb_node *n;
+
+#ifdef CONFIG_KALLSYMS
+	unsigned long symsize;
+	const char *symname;
+	char *modname;
+	char *delim = ":";
+	char namebuf[128];
+#endif
+
+	buf += sprintf(buf, "<0x%08lx> ", address);
+
+#ifdef CONFIG_KALLSYMS
+	/* look up the address and see if we are in kernel space */
+	symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
+
+	if (symname) {
+		/* yeah! kernel space! */
+		if (!modname)
+			modname = delim = "";
+		sprintf(buf, "{ %s%s%s%s + 0x%lx }",
+			delim, modname, delim, symname,
+			(unsigned long)offset);
+		return;
+	}
+#endif
+
+	if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
+		/* Problem in fixed code section? */
+		strcat(buf, "/* Maybe fixed code section */");
+		return;
+
+	} else if (address < CONFIG_BOOT_LOAD) {
+		/* Problem somewhere before the kernel start address */
+		strcat(buf, "/* Maybe null pointer? */");
+		return;
+
+	} else if (address >= COREMMR_BASE) {
+		strcat(buf, "/* core mmrs */");
+		return;
+
+	} else if (address >= SYSMMR_BASE) {
+		strcat(buf, "/* system mmrs */");
+		return;
+
+	} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
+		strcat(buf, "/* on-chip L1 ROM */");
+		return;
+
+	} else if (address >= L1_SCRATCH_START && address < L1_SCRATCH_START + L1_SCRATCH_LENGTH) {
+		strcat(buf, "/* on-chip scratchpad */");
+		return;
+
+	} else if (address >= physical_mem_end && address < ASYNC_BANK0_BASE) {
+		strcat(buf, "/* unconnected memory */");
+		return;
+
+	} else if (address >= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE && address < BOOT_ROM_START) {
+		strcat(buf, "/* reserved memory */");
+		return;
+
+	} else if (address >= L1_DATA_A_START && address < L1_DATA_A_START + L1_DATA_A_LENGTH) {
+		strcat(buf, "/* on-chip Data Bank A */");
+		return;
+
+	} else if (address >= L1_DATA_B_START && address < L1_DATA_B_START + L1_DATA_B_LENGTH) {
+		strcat(buf, "/* on-chip Data Bank B */");
+		return;
+	}
+
+	/*
+	 * Don't walk any of the vmas if we are oopsing, it has been known
+	 * to cause problems - corrupt vmas (kernel crashes) cause double faults
+	 */
+	if (oops_in_progress) {
+		strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
+		return;
+	}
+
+	/* looks like we're off in user-land, so let's walk all the
+	 * mappings of all our processes and see if we can't be a whee
+	 * bit more specific
+	 */
+	write_lock_irqsave(&tasklist_lock, flags);
+	for_each_process(p) {
+		mm = (in_atomic ? p->mm : get_task_mm(p));
+		if (!mm)
+			continue;
+
+		if (!down_read_trylock(&mm->mmap_sem)) {
+			if (!in_atomic)
+				mmput(mm);
+			continue;
+		}
+
+		for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
+			struct vm_area_struct *vma;
+
+			vma = rb_entry(n, struct vm_area_struct, vm_rb);
+
+			if (address >= vma->vm_start && address < vma->vm_end) {
+				char _tmpbuf[256];
+				char *name = p->comm;
+				struct file *file = vma->vm_file;
+
+				if (file) {
+					char *d_name = d_path(&file->f_path, _tmpbuf,
+						      sizeof(_tmpbuf));
+					if (!IS_ERR(d_name))
+						name = d_name;
+				}
+
+				/* FLAT does not have its text aligned to the start of
+				 * the map while FDPIC ELF does ...
+				 */
+
+				/* before we can check flat/fdpic, we need to
+				 * make sure current is valid
+				 */
+				if ((unsigned long)current >= FIXED_CODE_START &&
+				    !((unsigned long)current & 0x3)) {
+					if (current->mm &&
+					    (address > current->mm->start_code) &&
+					    (address < current->mm->end_code))
+						offset = address - current->mm->start_code;
+					else
+						offset = (address - vma->vm_start) +
+							 (vma->vm_pgoff << PAGE_SHIFT);
+
+					sprintf(buf, "[ %s + 0x%lx ]", name, offset);
+				} else
+					sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
+						name, vma->vm_start, vma->vm_end);
+
+				up_read(&mm->mmap_sem);
+				if (!in_atomic)
+					mmput(mm);
+
+				if (buf[0] == '\0')
+					sprintf(buf, "[ %s ] dynamic memory", name);
+
+				goto done;
+			}
+		}
+
+		up_read(&mm->mmap_sem);
+		if (!in_atomic)
+			mmput(mm);
+	}
+
+	/*
+	 * we were unable to find this address anywhere,
+	 * or some MMs were skipped because they were in use.
+	 */
+	sprintf(buf, "/* kernel dynamic memory */");
+
+done:
+	write_unlock_irqrestore(&tasklist_lock, flags);
+}
+
+#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
+
+/*
+ * Similar to get_user, do some address checking, then dereference
+ * Return true on success, false on bad address
+ */
+bool get_mem16(unsigned short *val, unsigned short *address)
+{
+	unsigned long addr = (unsigned long)address;
+
+	/* Check for odd addresses */
+	if (addr & 0x1)
+		return false;
+
+	switch (bfin_mem_access_type(addr, 2)) {
+	case BFIN_MEM_ACCESS_CORE:
+	case BFIN_MEM_ACCESS_CORE_ONLY:
+		*val = *address;
+		return true;
+	case BFIN_MEM_ACCESS_DMA:
+		dma_memcpy(val, address, 2);
+		return true;
+	case BFIN_MEM_ACCESS_ITEST:
+		isram_memcpy(val, address, 2);
+		return true;
+	default: /* invalid access */
+		return false;
+	}
+}
+
+bool get_instruction(unsigned int *val, unsigned short *address)
+{
+	unsigned long addr = (unsigned long)address;
+	unsigned short opcode0, opcode1;
+
+	/* Check for odd addresses */
+	if (addr & 0x1)
+		return false;
+
+	/* MMR region will never have instructions */
+	if (addr >= SYSMMR_BASE)
+		return false;
+
+	/* Scratchpad will never have instructions */
+	if (addr >= L1_SCRATCH_START && addr < L1_SCRATCH_START + L1_SCRATCH_LENGTH)
+		return false;
+
+	/* Data banks will never have instructions */
+	if (addr >= BOOT_ROM_START + BOOT_ROM_LENGTH && addr < L1_CODE_START)
+		return false;
+
+	if (!get_mem16(&opcode0, address))
+		return false;
+
+	/* was this a 32-bit instruction? If so, get the next 16 bits */
+	if ((opcode0 & 0xc000) == 0xc000) {
+		if (!get_mem16(&opcode1, address + 1))
+			return false;
+		*val = (opcode0 << 16) + opcode1;
+	} else
+		*val = opcode0;
+
+	return true;
+}
+
+#if defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
+/*
+ * decode the instruction if we are printing out the trace, as it
+ * makes things easier to follow, without running it through objdump
+ * Decode the change of flow, and the common load/store instructions
+ * which are the main cause for faults, and discontinuities in the trace
+ * buffer.
+ */
+
+#define ProgCtrl_opcode         0x0000
+#define ProgCtrl_poprnd_bits    0
+#define ProgCtrl_poprnd_mask    0xf
+#define ProgCtrl_prgfunc_bits   4
+#define ProgCtrl_prgfunc_mask   0xf
+#define ProgCtrl_code_bits      8
+#define ProgCtrl_code_mask      0xff
+
+static void decode_ProgCtrl_0(unsigned int opcode)
+{
+	int poprnd  = ((opcode >> ProgCtrl_poprnd_bits) & ProgCtrl_poprnd_mask);
+	int prgfunc = ((opcode >> ProgCtrl_prgfunc_bits) & ProgCtrl_prgfunc_mask);
+
+	if (prgfunc == 0 && poprnd == 0)
+		pr_cont("NOP");
+	else if (prgfunc == 1 && poprnd == 0)
+		pr_cont("RTS");
+	else if (prgfunc == 1 && poprnd == 1)
+		pr_cont("RTI");
+	else if (prgfunc == 1 && poprnd == 2)
+		pr_cont("RTX");
+	else if (prgfunc == 1 && poprnd == 3)
+		pr_cont("RTN");
+	else if (prgfunc == 1 && poprnd == 4)
+		pr_cont("RTE");
+	else if (prgfunc == 2 && poprnd == 0)
+		pr_cont("IDLE");
+	else if (prgfunc == 2 && poprnd == 3)
+		pr_cont("CSYNC");
+	else if (prgfunc == 2 && poprnd == 4)
+		pr_cont("SSYNC");
+	else if (prgfunc == 2 && poprnd == 5)
+		pr_cont("EMUEXCPT");
+	else if (prgfunc == 3)
+		pr_cont("CLI R%i", poprnd);
+	else if (prgfunc == 4)
+		pr_cont("STI R%i", poprnd);
+	else if (prgfunc == 5)
+		pr_cont("JUMP (P%i)", poprnd);
+	else if (prgfunc == 6)
+		pr_cont("CALL (P%i)", poprnd);
+	else if (prgfunc == 7)
+		pr_cont("CALL (PC + P%i)", poprnd);
+	else if (prgfunc == 8)
+		pr_cont("JUMP (PC + P%i", poprnd);
+	else if (prgfunc == 9)
+		pr_cont("RAISE %i", poprnd);
+	else if (prgfunc == 10)
+		pr_cont("EXCPT %i", poprnd);
+	else
+		pr_cont("0x%04x", opcode);
+
+}
+
+#define BRCC_opcode             0x1000
+#define BRCC_offset_bits        0
+#define BRCC_offset_mask        0x3ff
+#define BRCC_B_bits             10
+#define BRCC_B_mask             0x1
+#define BRCC_T_bits             11
+#define BRCC_T_mask             0x1
+#define BRCC_code_bits          12
+#define BRCC_code_mask          0xf
+
+static void decode_BRCC_0(unsigned int opcode)
+{
+	int B = ((opcode >> BRCC_B_bits) & BRCC_B_mask);
+	int T = ((opcode >> BRCC_T_bits) & BRCC_T_mask);
+
+	pr_cont("IF %sCC JUMP pcrel %s", T ? "" : "!", B ? "(BP)" : "");
+}
+
+#define CALLa_opcode    0xe2000000
+#define CALLa_addr_bits 0
+#define CALLa_addr_mask 0xffffff
+#define CALLa_S_bits    24
+#define CALLa_S_mask    0x1
+#define CALLa_code_bits 25
+#define CALLa_code_mask 0x7f
+
+static void decode_CALLa_0(unsigned int opcode)
+{
+	int S   = ((opcode >> (CALLa_S_bits - 16)) & CALLa_S_mask);
+
+	if (S)
+		pr_cont("CALL pcrel");
+	else
+		pr_cont("JUMP.L");
+}
+
+#define LoopSetup_opcode                0xe0800000
+#define LoopSetup_eoffset_bits          0
+#define LoopSetup_eoffset_mask          0x3ff
+#define LoopSetup_dontcare_bits         10
+#define LoopSetup_dontcare_mask         0x3
+#define LoopSetup_reg_bits              12
+#define LoopSetup_reg_mask              0xf
+#define LoopSetup_soffset_bits          16
+#define LoopSetup_soffset_mask          0xf
+#define LoopSetup_c_bits                20
+#define LoopSetup_c_mask                0x1
+#define LoopSetup_rop_bits              21
+#define LoopSetup_rop_mask              0x3
+#define LoopSetup_code_bits             23
+#define LoopSetup_code_mask             0x1ff
+
+static void decode_LoopSetup_0(unsigned int opcode)
+{
+	int c   = ((opcode >> LoopSetup_c_bits)   & LoopSetup_c_mask);
+	int reg = ((opcode >> LoopSetup_reg_bits) & LoopSetup_reg_mask);
+	int rop = ((opcode >> LoopSetup_rop_bits) & LoopSetup_rop_mask);
+
+	pr_cont("LSETUP <> LC%i", c);
+	if ((rop & 1) == 1)
+		pr_cont("= P%i", reg);
+	if ((rop & 2) == 2)
+		pr_cont(" >> 0x1");
+}
+
+#define DspLDST_opcode          0x9c00
+#define DspLDST_reg_bits        0
+#define DspLDST_reg_mask        0x7
+#define DspLDST_i_bits          3
+#define DspLDST_i_mask          0x3
+#define DspLDST_m_bits          5
+#define DspLDST_m_mask          0x3
+#define DspLDST_aop_bits        7
+#define DspLDST_aop_mask        0x3
+#define DspLDST_W_bits          9
+#define DspLDST_W_mask          0x1
+#define DspLDST_code_bits       10
+#define DspLDST_code_mask       0x3f
+
+static void decode_dspLDST_0(unsigned int opcode)
+{
+	int i   = ((opcode >> DspLDST_i_bits) & DspLDST_i_mask);
+	int m   = ((opcode >> DspLDST_m_bits) & DspLDST_m_mask);
+	int W   = ((opcode >> DspLDST_W_bits) & DspLDST_W_mask);
+	int aop = ((opcode >> DspLDST_aop_bits) & DspLDST_aop_mask);
+	int reg = ((opcode >> DspLDST_reg_bits) & DspLDST_reg_mask);
+
+	if (W == 0) {
+		pr_cont("R%i", reg);
+		switch (m) {
+		case 0:
+			pr_cont(" = ");
+			break;
+		case 1:
+			pr_cont(".L = ");
+			break;
+		case 2:
+			pr_cont(".W = ");
+			break;
+		}
+	}
+
+	pr_cont("[ I%i", i);
+
+	switch (aop) {
+	case 0:
+		pr_cont("++ ]");
+		break;
+	case 1:
+		pr_cont("-- ]");
+		break;
+	}
+
+	if (W == 1) {
+		pr_cont(" = R%i", reg);
+		switch (m) {
+		case 1:
+			pr_cont(".L = ");
+			break;
+		case 2:
+			pr_cont(".W = ");
+			break;
+		}
+	}
+}
+
+#define LDST_opcode             0x9000
+#define LDST_reg_bits           0
+#define LDST_reg_mask           0x7
+#define LDST_ptr_bits           3
+#define LDST_ptr_mask           0x7
+#define LDST_Z_bits             6
+#define LDST_Z_mask             0x1
+#define LDST_aop_bits           7
+#define LDST_aop_mask           0x3
+#define LDST_W_bits             9
+#define LDST_W_mask             0x1
+#define LDST_sz_bits            10
+#define LDST_sz_mask            0x3
+#define LDST_code_bits          12
+#define LDST_code_mask          0xf
+
+static void decode_LDST_0(unsigned int opcode)
+{
+	int Z   = ((opcode >> LDST_Z_bits) & LDST_Z_mask);
+	int W   = ((opcode >> LDST_W_bits) & LDST_W_mask);
+	int sz  = ((opcode >> LDST_sz_bits) & LDST_sz_mask);
+	int aop = ((opcode >> LDST_aop_bits) & LDST_aop_mask);
+	int reg = ((opcode >> LDST_reg_bits) & LDST_reg_mask);
+	int ptr = ((opcode >> LDST_ptr_bits) & LDST_ptr_mask);
+
+	if (W == 0)
+		pr_cont("%s%i = ", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+	switch (sz) {
+	case 1:
+		pr_cont("W");
+		break;
+	case 2:
+		pr_cont("B");
+		break;
+	}
+
+	pr_cont("[P%i", ptr);
+
+	switch (aop) {
+	case 0:
+		pr_cont("++");
+		break;
+	case 1:
+		pr_cont("--");
+		break;
+	}
+	pr_cont("]");
+
+	if (W == 1)
+		pr_cont(" = %s%i ", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+	if (sz) {
+		if (Z)
+			pr_cont(" (X)");
+		else
+			pr_cont(" (Z)");
+	}
+}
+
+#define LDSTii_opcode           0xa000
+#define LDSTii_reg_bit          0
+#define LDSTii_reg_mask         0x7
+#define LDSTii_ptr_bit          3
+#define LDSTii_ptr_mask         0x7
+#define LDSTii_offset_bit       6
+#define LDSTii_offset_mask      0xf
+#define LDSTii_op_bit           10
+#define LDSTii_op_mask          0x3
+#define LDSTii_W_bit            12
+#define LDSTii_W_mask           0x1
+#define LDSTii_code_bit         13
+#define LDSTii_code_mask        0x7
+
+static void decode_LDSTii_0(unsigned int opcode)
+{
+	int reg = ((opcode >> LDSTii_reg_bit) & LDSTii_reg_mask);
+	int ptr = ((opcode >> LDSTii_ptr_bit) & LDSTii_ptr_mask);
+	int offset = ((opcode >> LDSTii_offset_bit) & LDSTii_offset_mask);
+	int op = ((opcode >> LDSTii_op_bit) & LDSTii_op_mask);
+	int W = ((opcode >> LDSTii_W_bit) & LDSTii_W_mask);
+
+	if (W == 0) {
+		pr_cont("%s%i = %s[P%i + %i]", op == 3 ? "R" : "P", reg,
+			op == 1 || op == 2 ? "" : "W", ptr, offset);
+		if (op == 2)
+			pr_cont("(Z)");
+		if (op == 3)
+			pr_cont("(X)");
+	} else {
+		pr_cont("%s[P%i + %i] = %s%i", op == 0 ? "" : "W", ptr,
+			offset, op == 3 ? "P" : "R", reg);
+	}
+}
+
+#define LDSTidxI_opcode         0xe4000000
+#define LDSTidxI_offset_bits    0
+#define LDSTidxI_offset_mask    0xffff
+#define LDSTidxI_reg_bits       16
+#define LDSTidxI_reg_mask       0x7
+#define LDSTidxI_ptr_bits       19
+#define LDSTidxI_ptr_mask       0x7
+#define LDSTidxI_sz_bits        22
+#define LDSTidxI_sz_mask        0x3
+#define LDSTidxI_Z_bits         24
+#define LDSTidxI_Z_mask         0x1
+#define LDSTidxI_W_bits         25
+#define LDSTidxI_W_mask         0x1
+#define LDSTidxI_code_bits      26
+#define LDSTidxI_code_mask      0x3f
+
+static void decode_LDSTidxI_0(unsigned int opcode)
+{
+	int Z      = ((opcode >> LDSTidxI_Z_bits)      & LDSTidxI_Z_mask);
+	int W      = ((opcode >> LDSTidxI_W_bits)      & LDSTidxI_W_mask);
+	int sz     = ((opcode >> LDSTidxI_sz_bits)     & LDSTidxI_sz_mask);
+	int reg    = ((opcode >> LDSTidxI_reg_bits)    & LDSTidxI_reg_mask);
+	int ptr    = ((opcode >> LDSTidxI_ptr_bits)    & LDSTidxI_ptr_mask);
+	int offset = ((opcode >> LDSTidxI_offset_bits) & LDSTidxI_offset_mask);
+
+	if (W == 0)
+		pr_cont("%s%i = ", sz == 0 && Z == 1 ? "P" : "R", reg);
+
+	if (sz == 1)
+		pr_cont("W");
+	if (sz == 2)
+		pr_cont("B");
+
+	pr_cont("[P%i + %s0x%x]", ptr, offset & 0x20 ? "-" : "",
+		(offset & 0x1f) << 2);
+
+	if (W == 0 && sz != 0) {
+		if (Z)
+			pr_cont("(X)");
+		else
+			pr_cont("(Z)");
+	}
+
+	if (W == 1)
+		pr_cont("= %s%i", (sz == 0 && Z == 1) ? "P" : "R", reg);
+
+}
+
+static void decode_opcode(unsigned int opcode)
+{
+#ifdef CONFIG_BUG
+	if (opcode == BFIN_BUG_OPCODE)
+		pr_cont("BUG");
+	else
+#endif
+	if ((opcode & 0xffffff00) == ProgCtrl_opcode)
+		decode_ProgCtrl_0(opcode);
+	else if ((opcode & 0xfffff000) == BRCC_opcode)
+		decode_BRCC_0(opcode);
+	else if ((opcode & 0xfffff000) == 0x2000)
+		pr_cont("JUMP.S");
+	else if ((opcode & 0xfe000000) == CALLa_opcode)
+		decode_CALLa_0(opcode);
+	else if ((opcode & 0xff8000C0) == LoopSetup_opcode)
+		decode_LoopSetup_0(opcode);
+	else if ((opcode & 0xfffffc00) == DspLDST_opcode)
+		decode_dspLDST_0(opcode);
+	else if ((opcode & 0xfffff000) == LDST_opcode)
+		decode_LDST_0(opcode);
+	else if ((opcode & 0xffffe000) == LDSTii_opcode)
+		decode_LDSTii_0(opcode);
+	else if ((opcode & 0xfc000000) == LDSTidxI_opcode)
+		decode_LDSTidxI_0(opcode);
+	else if (opcode & 0xffff0000)
+		pr_cont("0x%08x", opcode);
+	else
+		pr_cont("0x%04x", opcode);
+}
+
+#define BIT_MULTI_INS 0x08000000
+static void decode_instruction(unsigned short *address)
+{
+	unsigned int opcode;
+
+	if (!get_instruction(&opcode, address))
+		return;
+
+	decode_opcode(opcode);
+
+	/* If things are a 32-bit instruction, it has the possibility of being
+	 * a multi-issue instruction (a 32-bit, and 2 16 bit instrucitions)
+	 * This test collidates with the unlink instruction, so disallow that
+	 */
+	if ((opcode & 0xc0000000) == 0xc0000000 &&
+	    (opcode & BIT_MULTI_INS) &&
+	    (opcode & 0xe8000000) != 0xe8000000) {
+		pr_cont(" || ");
+		if (!get_instruction(&opcode, address + 2))
+			return;
+		decode_opcode(opcode);
+		pr_cont(" || ");
+		if (!get_instruction(&opcode, address + 3))
+			return;
+		decode_opcode(opcode);
+	}
+}
+#endif
+
+void dump_bfin_trace_buffer(void)
+{
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+	int tflags, i = 0, fault = 0;
+	char buf[150];
+	unsigned short *addr;
+	unsigned int cpu = raw_smp_processor_id();
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	int j, index;
+#endif
+
+	trace_buffer_save(tflags);
+
+	pr_notice("Hardware Trace:\n");
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	pr_notice("WARNING: Expanded trace turned on - can not trace exceptions\n");
+#endif
+
+	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
+		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
+			addr = (unsigned short *)bfin_read_TBUF();
+			decode_address(buf, (unsigned long)addr);
+			pr_notice("%4i Target : %s\n", i, buf);
+			/* Normally, the faulting instruction doesn't go into
+			 * the trace buffer, (since it doesn't commit), so
+			 * we print out the fault address here
+			 */
+			if (!fault && addr == ((unsigned short *)evt_ivhw)) {
+				addr = (unsigned short *)bfin_read_TBUF();
+				decode_address(buf, (unsigned long)addr);
+				pr_notice("      FAULT : %s ", buf);
+				decode_instruction(addr);
+				pr_cont("\n");
+				fault = 1;
+				continue;
+			}
+			if (!fault && addr == (unsigned short *)trap &&
+				(cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE) > VEC_EXCPT15) {
+				decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
+				pr_notice("      FAULT : %s ", buf);
+				decode_instruction((unsigned short *)cpu_pda[cpu].icplb_fault_addr);
+				pr_cont("\n");
+				fault = 1;
+			}
+			addr = (unsigned short *)bfin_read_TBUF();
+			decode_address(buf, (unsigned long)addr);
+			pr_notice("     Source : %s ", buf);
+			decode_instruction(addr);
+			pr_cont("\n");
+		}
+	}
+
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+	if (trace_buff_offset)
+		index = trace_buff_offset / 4;
+	else
+		index = EXPAND_LEN;
+
+	j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
+	while (j) {
+		decode_address(buf, software_trace_buff[index]);
+		pr_notice("%4i Target : %s\n", i, buf);
+		index -= 1;
+		if (index < 0)
+			index = EXPAND_LEN;
+		decode_address(buf, software_trace_buff[index]);
+		pr_notice("     Source : %s ", buf);
+		decode_instruction((unsigned short *)software_trace_buff[index]);
+		pr_cont("\n");
+		index -= 1;
+		if (index < 0)
+			index = EXPAND_LEN;
+		j--;
+		i++;
+	}
+#endif
+
+	trace_buffer_restore(tflags);
+#endif
+}
+EXPORT_SYMBOL(dump_bfin_trace_buffer);
+
+void dump_bfin_process(struct pt_regs *fp)
+{
+	/* We should be able to look at fp->ipend, but we don't push it on the
+	 * stack all the time, so do this until we fix that */
+	unsigned int context = bfin_read_IPEND();
+
+	if (oops_in_progress)
+		pr_emerg("Kernel OOPS in progress\n");
+
+	if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
+		pr_notice("HW Error context\n");
+	else if (context & 0x0020)
+		pr_notice("Deferred Exception context\n");
+	else if (context & 0x3FC0)
+		pr_notice("Interrupt context\n");
+	else if (context & 0x4000)
+		pr_notice("Deferred Interrupt context\n");
+	else if (context & 0x8000)
+		pr_notice("Kernel process context\n");
+
+	/* Because we are crashing, and pointers could be bad, we check things
+	 * pretty closely before we use them
+	 */
+	if ((unsigned long)current >= FIXED_CODE_START &&
+	    !((unsigned long)current & 0x3) && current->pid) {
+		pr_notice("CURRENT PROCESS:\n");
+		if (current->comm >= (char *)FIXED_CODE_START)
+			pr_notice("COMM=%s PID=%d",
+				current->comm, current->pid);
+		else
+			pr_notice("COMM= invalid");
+
+		pr_cont("  CPU=%d\n", current_thread_info()->cpu);
+		if (!((unsigned long)current->mm & 0x3) &&
+			(unsigned long)current->mm >= FIXED_CODE_START) {
+			pr_notice("TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n",
+				(void *)current->mm->start_code,
+				(void *)current->mm->end_code,
+				(void *)current->mm->start_data,
+				(void *)current->mm->end_data);
+			pr_notice(" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
+				(void *)current->mm->end_data,
+				(void *)current->mm->brk,
+				(void *)current->mm->start_stack);
+		} else
+			pr_notice("invalid mm\n");
+	} else
+		pr_notice("No Valid process in current context\n");
+}
+
+void dump_bfin_mem(struct pt_regs *fp)
+{
+	unsigned short *addr, *erraddr, val = 0, err = 0;
+	char sti = 0, buf[6];
+
+	erraddr = (void *)fp->pc;
+
+	pr_notice("return address: [0x%p]; contents of:", erraddr);
+
+	for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
+	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
+	     addr++) {
+		if (!((unsigned long)addr & 0xF))
+			pr_notice("0x%p: ", addr);
+
+		if (!get_mem16(&val, addr)) {
+				val = 0;
+				sprintf(buf, "????");
+		} else
+			sprintf(buf, "%04x", val);
+
+		if (addr == erraddr) {
+			pr_cont("[%s]", buf);
+			err = val;
+		} else
+			pr_cont(" %s ", buf);
+
+		/* Do any previous instructions turn on interrupts? */
+		if (addr <= erraddr &&				/* in the past */
+		    ((val >= 0x0040 && val <= 0x0047) ||	/* STI instruction */
+		      val == 0x017b))				/* [SP++] = RETI */
+			sti = 1;
+	}
+
+	pr_cont("\n");
+
+	/* Hardware error interrupts can be deferred */
+	if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
+	    oops_in_progress)){
+		pr_notice("Looks like this was a deferred error - sorry\n");
+#ifndef CONFIG_DEBUG_HWERR
+		pr_notice("The remaining message may be meaningless\n");
+		pr_notice("You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
+#else
+		/* If we are handling only one peripheral interrupt
+		 * and current mm and pid are valid, and the last error
+		 * was in that user space process's text area
+		 * print it out - because that is where the problem exists
+		 */
+		if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) &&
+		     (current->pid && current->mm)) {
+			/* And the last RETI points to the current userspace context */
+			if ((fp + 1)->pc >= current->mm->start_code &&
+			    (fp + 1)->pc <= current->mm->end_code) {
+				pr_notice("It might be better to look around here :\n");
+				pr_notice("-------------------------------------------\n");
+				show_regs(fp + 1);
+				pr_notice("-------------------------------------------\n");
+			}
+		}
+#endif
+	}
+}
+
+void show_regs(struct pt_regs *fp)
+{
+	char buf[150];
+	struct irqaction *action;
+	unsigned int i;
+	unsigned long flags = 0;
+	unsigned int cpu = raw_smp_processor_id();
+	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
+
+	pr_notice("\n");
+	if (CPUID != bfin_cpuid())
+		pr_notice("Compiled for cpu family 0x%04x (Rev %d), "
+			"but running on:0x%04x (Rev %d)\n",
+			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
+
+	pr_notice("ADSP-%s-0.%d",
+		CPU, bfin_compiled_revid());
+
+	if (bfin_compiled_revid() !=  bfin_revid())
+		pr_cont("(Detected 0.%d)", bfin_revid());
+
+	pr_cont(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
+		get_cclk()/1000000, get_sclk()/1000000,
+#ifdef CONFIG_MPU
+		"mpu on"
+#else
+		"mpu off"
+#endif
+		);
+
+	pr_notice("%s", linux_banner);
+
+	pr_notice("\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
+	pr_notice(" SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
+		(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
+	if (fp->ipend & EVT_IRPTEN)
+		pr_notice("  Global Interrupts Disabled (IPEND[4])\n");
+	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
+			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
+		pr_notice("  Peripheral interrupts masked off\n");
+	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
+		pr_notice("  Kernel interrupts masked off\n");
+	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
+		pr_notice("  HWERRCAUSE: 0x%lx\n",
+			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
+#ifdef EBIU_ERRMST
+		/* If the error was from the EBIU, print it out */
+		if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
+			pr_notice("  EBIU Error Reason  : 0x%04x\n",
+				bfin_read_EBIU_ERRMST());
+			pr_notice("  EBIU Error Address : 0x%08x\n",
+				bfin_read_EBIU_ERRADD());
+		}
+#endif
+	}
+	pr_notice("  EXCAUSE   : 0x%lx\n",
+		fp->seqstat & SEQSTAT_EXCAUSE);
+	for (i = 2; i <= 15 ; i++) {
+		if (fp->ipend & (1 << i)) {
+			if (i != 4) {
+				decode_address(buf, bfin_read32(EVT0 + 4*i));
+				pr_notice("  physical IVG%i asserted : %s\n", i, buf);
+			} else
+				pr_notice("  interrupts disabled\n");
+		}
+	}
+
+	/* if no interrupts are going off, don't print this out */
+	if (fp->ipend & ~0x3F) {
+		for (i = 0; i < (NR_IRQS - 1); i++) {
+			if (!in_atomic)
+				raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
+
+			action = irq_desc[i].action;
+			if (!action)
+				goto unlock;
+
+			decode_address(buf, (unsigned int)action->handler);
+			pr_notice("  logical irq %3d mapped  : %s", i, buf);
+			for (action = action->next; action; action = action->next) {
+				decode_address(buf, (unsigned int)action->handler);
+				pr_cont(", %s", buf);
+			}
+			pr_cont("\n");
+unlock:
+			if (!in_atomic)
+				raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+		}
+	}
+
+	decode_address(buf, fp->rete);
+	pr_notice(" RETE: %s\n", buf);
+	decode_address(buf, fp->retn);
+	pr_notice(" RETN: %s\n", buf);
+	decode_address(buf, fp->retx);
+	pr_notice(" RETX: %s\n", buf);
+	decode_address(buf, fp->rets);
+	pr_notice(" RETS: %s\n", buf);
+	decode_address(buf, fp->pc);
+	pr_notice(" PC  : %s\n", buf);
+
+	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) &&
+	    (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
+		decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
+		pr_notice("DCPLB_FAULT_ADDR: %s\n", buf);
+		decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
+		pr_notice("ICPLB_FAULT_ADDR: %s\n", buf);
+	}
+
+	pr_notice("PROCESSOR STATE:\n");
+	pr_notice(" R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
+		fp->r0, fp->r1, fp->r2, fp->r3);
+	pr_notice(" R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
+		fp->r4, fp->r5, fp->r6, fp->r7);
+	pr_notice(" P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
+		fp->p0, fp->p1, fp->p2, fp->p3);
+	pr_notice(" P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
+		fp->p4, fp->p5, fp->fp, (long)fp);
+	pr_notice(" LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
+		fp->lb0, fp->lt0, fp->lc0);
+	pr_notice(" LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
+		fp->lb1, fp->lt1, fp->lc1);
+	pr_notice(" B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
+		fp->b0, fp->l0, fp->m0, fp->i0);
+	pr_notice(" B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
+		fp->b1, fp->l1, fp->m1, fp->i1);
+	pr_notice(" B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
+		fp->b2, fp->l2, fp->m2, fp->i2);
+	pr_notice(" B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
+		fp->b3, fp->l3, fp->m3, fp->i3);
+	pr_notice("A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
+		fp->a0w, fp->a0x, fp->a1w, fp->a1x);
+
+	pr_notice("USP : %08lx  ASTAT: %08lx\n",
+		rdusp(), fp->astat);
+
+	pr_notice("\n");
+}
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/kernel/traps.c linux-libre-2.6.35-gnu/arch/blackfin/kernel/traps.c
--- linux-libre-2.6.34-gnu/arch/blackfin/kernel/traps.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/kernel/traps.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,25 +1,22 @@
 /*
- * Copyright 2004-2009 Analog Devices Inc.
+ * Main exception handling logic.
+ *
+ * Copyright 2004-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later
  */
 
 #include <linux/bug.h>
 #include <linux/uaccess.h>
-#include <linux/interrupt.h>
 #include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <linux/fs.h>
-#include <linux/rbtree.h>
 #include <asm/traps.h>
-#include <asm/cacheflush.h>
 #include <asm/cplb.h>
-#include <asm/dma.h>
 #include <asm/blackfin.h>
 #include <asm/irq_handler.h>
 #include <linux/irq.h>
 #include <asm/trace.h>
 #include <asm/fixed_code.h>
+#include <asm/pseudo_instructions.h>
 
 #ifdef CONFIG_KGDB
 # include <linux/kgdb.h>
@@ -62,194 +59,6 @@
 	CSYNC();
 }
 
-static void decode_address(char *buf, unsigned long address)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-	struct task_struct *p;
-	struct mm_struct *mm;
-	unsigned long flags, offset;
-	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
-	struct rb_node *n;
-
-#ifdef CONFIG_KALLSYMS
-	unsigned long symsize;
-	const char *symname;
-	char *modname;
-	char *delim = ":";
-	char namebuf[128];
-#endif
-
-	buf += sprintf(buf, "<0x%08lx> ", address);
-
-#ifdef CONFIG_KALLSYMS
-	/* look up the address and see if we are in kernel space */
-	symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf);
-
-	if (symname) {
-		/* yeah! kernel space! */
-		if (!modname)
-			modname = delim = "";
-		sprintf(buf, "{ %s%s%s%s + 0x%lx }",
-		        delim, modname, delim, symname,
-		        (unsigned long)offset);
-		return;
-	}
-#endif
-
-	if (address >= FIXED_CODE_START && address < FIXED_CODE_END) {
-		/* Problem in fixed code section? */
-		strcat(buf, "/* Maybe fixed code section */");
-		return;
-
-	} else if (address < CONFIG_BOOT_LOAD) {
-		/* Problem somewhere before the kernel start address */
-		strcat(buf, "/* Maybe null pointer? */");
-		return;
-
-	} else if (address >= COREMMR_BASE) {
-		strcat(buf, "/* core mmrs */");
-		return;
-
-	} else if (address >= SYSMMR_BASE) {
-		strcat(buf, "/* system mmrs */");
-		return;
-
-	} else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) {
-		strcat(buf, "/* on-chip L1 ROM */");
-		return;
-	}
-
-	/*
-	 * Don't walk any of the vmas if we are oopsing, it has been known
-	 * to cause problems - corrupt vmas (kernel crashes) cause double faults
-	 */
-	if (oops_in_progress) {
-		strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
-		return;
-	}
-
-	/* looks like we're off in user-land, so let's walk all the
-	 * mappings of all our processes and see if we can't be a whee
-	 * bit more specific
-	 */
-	write_lock_irqsave(&tasklist_lock, flags);
-	for_each_process(p) {
-		mm = (in_atomic ? p->mm : get_task_mm(p));
-		if (!mm)
-			continue;
-
-		if (!down_read_trylock(&mm->mmap_sem)) {
-			if (!in_atomic)
-				mmput(mm);
-			continue;
-		}
-
-		for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) {
-			struct vm_area_struct *vma;
-
-			vma = rb_entry(n, struct vm_area_struct, vm_rb);
-
-			if (address >= vma->vm_start && address < vma->vm_end) {
-				char _tmpbuf[256];
-				char *name = p->comm;
-				struct file *file = vma->vm_file;
-
-				if (file) {
-					char *d_name = d_path(&file->f_path, _tmpbuf,
-						      sizeof(_tmpbuf));
-					if (!IS_ERR(d_name))
-						name = d_name;
-				}
-
-				/* FLAT does not have its text aligned to the start of
-				 * the map while FDPIC ELF does ...
-				 */
-
-				/* before we can check flat/fdpic, we need to
-				 * make sure current is valid
-				 */
-				if ((unsigned long)current >= FIXED_CODE_START &&
-				    !((unsigned long)current & 0x3)) {
-					if (current->mm &&
-					    (address > current->mm->start_code) &&
-					    (address < current->mm->end_code))
-						offset = address - current->mm->start_code;
-					else
-						offset = (address - vma->vm_start) +
-							 (vma->vm_pgoff << PAGE_SHIFT);
-
-					sprintf(buf, "[ %s + 0x%lx ]", name, offset);
-				} else
-					sprintf(buf, "[ %s vma:0x%lx-0x%lx]",
-						name, vma->vm_start, vma->vm_end);
-
-				up_read(&mm->mmap_sem);
-				if (!in_atomic)
-					mmput(mm);
-
-				if (buf[0] == '\0')
-					sprintf(buf, "[ %s ] dynamic memory", name);
-
-				goto done;
-			}
-		}
-
-		up_read(&mm->mmap_sem);
-		if (!in_atomic)
-			mmput(mm);
-	}
-
-	/*
-	 * we were unable to find this address anywhere,
-	 * or some MMs were skipped because they were in use.
-	 */
-	sprintf(buf, "/* kernel dynamic memory */");
-
-done:
-	write_unlock_irqrestore(&tasklist_lock, flags);
-#else
-	sprintf(buf, " ");
-#endif
-}
-
-asmlinkage void double_fault_c(struct pt_regs *fp)
-{
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int j;
-	trace_buffer_save(j);
-#endif
-
-	console_verbose();
-	oops_in_progress = 1;
-#ifdef CONFIG_DEBUG_VERBOSE
-	printk(KERN_EMERG "Double Fault\n");
-#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
-	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
-		unsigned int cpu = raw_smp_processor_id();
-		char buf[150];
-		decode_address(buf, cpu_pda[cpu].retx_doublefault);
-		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
-			(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
-		decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
-		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
-		decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
-		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);
-
-		decode_address(buf, fp->retx);
-		printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf);
-	} else
-#endif
-	{
-		dump_bfin_process(fp);
-		dump_bfin_mem(fp);
-		show_regs(fp);
-		dump_bfin_trace_buffer();
-	}
-#endif
-	panic("Double Fault - unrecoverable event");
-
-}
-
 static int kernel_mode_regs(struct pt_regs *regs)
 {
 	return regs->ipend & 0xffc0;
@@ -260,6 +69,9 @@
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 	int j;
 #endif
+#ifdef CONFIG_BFIN_PSEUDODBG_INSNS
+	int opcode;
+#endif
 	unsigned int cpu = raw_smp_processor_id();
 	const char *strerror = NULL;
 	int sig = 0;
@@ -392,6 +204,19 @@
 			}
 		}
 #endif
+#ifdef CONFIG_BFIN_PSEUDODBG_INSNS
+		/*
+		 * Support for the fake instructions, if the instruction fails,
+		 * then just execute a illegal opcode failure (like normal).
+		 * Don't support these instructions inside the kernel
+		 */
+		if (!kernel_mode_regs(fp) && get_instruction(&opcode, (unsigned short *)fp->pc)) {
+			if (execute_pseudodbg_assert(fp, opcode))
+				goto traps_done;
+			if (execute_pseudodbg(fp, opcode))
+				goto traps_done;
+		}
+#endif
 		info.si_code = ILL_ILLOPC;
 		sig = SIGILL;
 		strerror = KERN_NOTICE EXC_0x21(KERN_NOTICE);
@@ -672,659 +497,44 @@
 	trace_buffer_restore(j);
 }
 
-/* Typical exception handling routines	*/
-
-#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
-
-/*
- * Similar to get_user, do some address checking, then dereference
- * Return true on success, false on bad address
- */
-static bool get_instruction(unsigned short *val, unsigned short *address)
-{
-	unsigned long addr = (unsigned long)address;
-
-	/* Check for odd addresses */
-	if (addr & 0x1)
-		return false;
-
-	/* MMR region will never have instructions */
-	if (addr >= SYSMMR_BASE)
-		return false;
-
-	switch (bfin_mem_access_type(addr, 2)) {
-		case BFIN_MEM_ACCESS_CORE:
-		case BFIN_MEM_ACCESS_CORE_ONLY:
-			*val = *address;
-			return true;
-		case BFIN_MEM_ACCESS_DMA:
-			dma_memcpy(val, address, 2);
-			return true;
-		case BFIN_MEM_ACCESS_ITEST:
-			isram_memcpy(val, address, 2);
-			return true;
-		default: /* invalid access */
-			return false;
-	}
-}
-
-/*
- * decode the instruction if we are printing out the trace, as it
- * makes things easier to follow, without running it through objdump
- * These are the normal instructions which cause change of flow, which
- * would be at the source of the trace buffer
- */
-#if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_BFIN_HWTRACE_ON)
-static void decode_instruction(unsigned short *address)
-{
-	unsigned short opcode;
-
-	if (get_instruction(&opcode, address)) {
-		if (opcode == 0x0010)
-			verbose_printk("RTS");
-		else if (opcode == 0x0011)
-			verbose_printk("RTI");
-		else if (opcode == 0x0012)
-			verbose_printk("RTX");
-		else if (opcode == 0x0013)
-			verbose_printk("RTN");
-		else if (opcode == 0x0014)
-			verbose_printk("RTE");
-		else if (opcode == 0x0025)
-			verbose_printk("EMUEXCPT");
-		else if (opcode >= 0x0040 && opcode <= 0x0047)
-			verbose_printk("STI R%i", opcode & 7);
-		else if (opcode >= 0x0050 && opcode <= 0x0057)
-			verbose_printk("JUMP (P%i)", opcode & 7);
-		else if (opcode >= 0x0060 && opcode <= 0x0067)
-			verbose_printk("CALL (P%i)", opcode & 7);
-		else if (opcode >= 0x0070 && opcode <= 0x0077)
-			verbose_printk("CALL (PC+P%i)", opcode & 7);
-		else if (opcode >= 0x0080 && opcode <= 0x0087)
-			verbose_printk("JUMP (PC+P%i)", opcode & 7);
-		else if (opcode >= 0x0090 && opcode <= 0x009F)
-			verbose_printk("RAISE 0x%x", opcode & 0xF);
-		else if (opcode >= 0x00A0 && opcode <= 0x00AF)
-			verbose_printk("EXCPT 0x%x", opcode & 0xF);
-		else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
-			verbose_printk("IF !CC JUMP");
-		else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
-			verbose_printk("IF CC JUMP");
-		else if (opcode >= 0x2000 && opcode <= 0x2fff)
-			verbose_printk("JUMP.S");
-		else if (opcode >= 0xe080 && opcode <= 0xe0ff)
-			verbose_printk("LSETUP");
-		else if (opcode >= 0xe200 && opcode <= 0xe2ff)
-			verbose_printk("JUMP.L");
-		else if (opcode >= 0xe300 && opcode <= 0xe3ff)
-			verbose_printk("CALL pcrel");
-		else
-			verbose_printk("0x%04x", opcode);
-	}
-
-}
-#endif
-
-void dump_bfin_trace_buffer(void)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int tflags, i = 0;
-	char buf[150];
-	unsigned short *addr;
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	int j, index;
-#endif
-
-	trace_buffer_save(tflags);
-
-	printk(KERN_NOTICE "Hardware Trace:\n");
-
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n");
-#endif
-
-	if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
-		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
-			decode_address(buf, (unsigned long)bfin_read_TBUF());
-			printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
-			addr = (unsigned short *)bfin_read_TBUF();
-			decode_address(buf, (unsigned long)addr);
-			printk(KERN_NOTICE "     Source : %s ", buf);
-			decode_instruction(addr);
-			printk("\n");
-		}
-	}
-
-#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
-	if (trace_buff_offset)
-		index = trace_buff_offset / 4;
-	else
-		index = EXPAND_LEN;
-
-	j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128;
-	while (j) {
-		decode_address(buf, software_trace_buff[index]);
-		printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
-		index -= 1;
-		if (index < 0 )
-			index = EXPAND_LEN;
-		decode_address(buf, software_trace_buff[index]);
-		printk(KERN_NOTICE "     Source : %s ", buf);
-		decode_instruction((unsigned short *)software_trace_buff[index]);
-		printk("\n");
-		index -= 1;
-		if (index < 0)
-			index = EXPAND_LEN;
-		j--;
-		i++;
-	}
-#endif
-
-	trace_buffer_restore(tflags);
-#endif
-#endif
-}
-EXPORT_SYMBOL(dump_bfin_trace_buffer);
-
-#ifdef CONFIG_BUG
-int is_valid_bugaddr(unsigned long addr)
-{
-	unsigned short opcode;
-
-	if (!get_instruction(&opcode, (unsigned short *)addr))
-		return 0;
-
-	return opcode == BFIN_BUG_OPCODE;
-}
-#endif
-
-/*
- * Checks to see if the address pointed to is either a
- * 16-bit CALL instruction, or a 32-bit CALL instruction
- */
-static bool is_bfin_call(unsigned short *addr)
-{
-	unsigned short opcode = 0, *ins_addr;
-	ins_addr = (unsigned short *)addr;
-
-	if (!get_instruction(&opcode, ins_addr))
-		return false;
-
-	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
-	    (opcode >= 0x0070 && opcode <= 0x0077))
-		return true;
-
-	ins_addr--;
-	if (!get_instruction(&opcode, ins_addr))
-		return false;
-
-	if (opcode >= 0xE300 && opcode <= 0xE3FF)
-		return true;
-
-	return false;
-
-}
-
-void show_stack(struct task_struct *task, unsigned long *stack)
-{
-#ifdef CONFIG_PRINTK
-	unsigned int *addr, *endstack, *fp = 0, *frame;
-	unsigned short *ins_addr;
-	char buf[150];
-	unsigned int i, j, ret_addr, frame_no = 0;
-
-	/*
-	 * If we have been passed a specific stack, use that one otherwise
-	 *    if we have been passed a task structure, use that, otherwise
-	 *    use the stack of where the variable "stack" exists
-	 */
-
-	if (stack == NULL) {
-		if (task) {
-			/* We know this is a kernel stack, so this is the start/end */
-			stack = (unsigned long *)task->thread.ksp;
-			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
-		} else {
-			/* print out the existing stack info */
-			stack = (unsigned long *)&stack;
-			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
-		}
-	} else
-		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
-
-	printk(KERN_NOTICE "Stack info:\n");
-	decode_address(buf, (unsigned int)stack);
-	printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
-
-	if (!access_ok(VERIFY_READ, stack, (unsigned int)endstack - (unsigned int)stack)) {
-		printk(KERN_NOTICE "Invalid stack pointer\n");
-		return;
-	}
-
-	/* First thing is to look for a frame pointer */
-	for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
-		if (*addr & 0x1)
-			continue;
-		ins_addr = (unsigned short *)*addr;
-		ins_addr--;
-		if (is_bfin_call(ins_addr))
-			fp = addr - 1;
-
-		if (fp) {
-			/* Let's check to see if it is a frame pointer */
-			while (fp >= (addr - 1) && fp < endstack
-			       && fp && ((unsigned int) fp & 0x3) == 0)
-				fp = (unsigned int *)*fp;
-			if (fp == 0 || fp == endstack) {
-				fp = addr - 1;
-				break;
-			}
-			fp = 0;
-		}
-	}
-	if (fp) {
-		frame = fp;
-		printk(KERN_NOTICE " FP: (0x%p)\n", fp);
-	} else
-		frame = 0;
-
-	/*
-	 * Now that we think we know where things are, we
-	 * walk the stack again, this time printing things out
-	 * incase there is no frame pointer, we still look for
-	 * valid return addresses
-	 */
-
-	/* First time print out data, next time, print out symbols */
-	for (j = 0; j <= 1; j++) {
-		if (j)
-			printk(KERN_NOTICE "Return addresses in stack:\n");
-		else
-			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
-
-		fp = frame;
-		frame_no = 0;
-
-		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
-		     addr < endstack; addr++, i++) {
-
-			ret_addr = 0;
-			if (!j && i % 8 == 0)
-				printk(KERN_NOTICE "%p:",addr);
-
-			/* if it is an odd address, or zero, just skip it */
-			if (*addr & 0x1 || !*addr)
-				goto print;
-
-			ins_addr = (unsigned short *)*addr;
-
-			/* Go back one instruction, and see if it is a CALL */
-			ins_addr--;
-			ret_addr = is_bfin_call(ins_addr);
- print:
-			if (!j && stack == (unsigned long *)addr)
-				printk("[%08x]", *addr);
-			else if (ret_addr)
-				if (j) {
-					decode_address(buf, (unsigned int)*addr);
-					if (frame == addr) {
-						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
-						continue;
-					}
-					printk(KERN_NOTICE "    address : %s\n", buf);
-				} else
-					printk("<%08x>", *addr);
-			else if (fp == addr) {
-				if (j)
-					frame = addr+1;
-				else
-					printk("(%08x)", *addr);
-
-				fp = (unsigned int *)*addr;
-				frame_no++;
-
-			} else if (!j)
-				printk(" %08x ", *addr);
-		}
-		if (!j)
-			printk("\n");
-	}
-#endif
-}
-EXPORT_SYMBOL(show_stack);
-
-void dump_stack(void)
+asmlinkage void double_fault_c(struct pt_regs *fp)
 {
-	unsigned long stack;
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
-	int tflags;
+	int j;
+	trace_buffer_save(j);
 #endif
-	trace_buffer_save(tflags);
-	dump_bfin_trace_buffer();
-	show_stack(current, &stack);
-	trace_buffer_restore(tflags);
-}
-EXPORT_SYMBOL(dump_stack);
 
-void dump_bfin_process(struct pt_regs *fp)
-{
+	console_verbose();
+	oops_in_progress = 1;
 #ifdef CONFIG_DEBUG_VERBOSE
-	/* We should be able to look at fp->ipend, but we don't push it on the
-	 * stack all the time, so do this until we fix that */
-	unsigned int context = bfin_read_IPEND();
-
-	if (oops_in_progress)
-		verbose_printk(KERN_EMERG "Kernel OOPS in progress\n");
-
-	if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR)
-		verbose_printk(KERN_NOTICE "HW Error context\n");
-	else if (context & 0x0020)
-		verbose_printk(KERN_NOTICE "Deferred Exception context\n");
-	else if (context & 0x3FC0)
-		verbose_printk(KERN_NOTICE "Interrupt context\n");
-	else if (context & 0x4000)
-		verbose_printk(KERN_NOTICE "Deferred Interrupt context\n");
-	else if (context & 0x8000)
-		verbose_printk(KERN_NOTICE "Kernel process context\n");
-
-	/* Because we are crashing, and pointers could be bad, we check things
-	 * pretty closely before we use them
-	 */
-	if ((unsigned long)current >= FIXED_CODE_START &&
-	    !((unsigned long)current & 0x3) && current->pid) {
-		verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n");
-		if (current->comm >= (char *)FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE "COMM=%s PID=%d",
-				current->comm, current->pid);
-		else
-			verbose_printk(KERN_NOTICE "COMM= invalid");
+	printk(KERN_EMERG "Double Fault\n");
+#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
+	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) == VEC_UNCOV) {
+		unsigned int cpu = raw_smp_processor_id();
+		char buf[150];
+		decode_address(buf, cpu_pda[cpu].retx_doublefault);
+		printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n",
+			(unsigned int)cpu_pda[cpu].seqstat_doublefault & SEQSTAT_EXCAUSE, buf);
+		decode_address(buf, cpu_pda[cpu].dcplb_doublefault_addr);
+		printk(KERN_NOTICE "   DCPLB_FAULT_ADDR: %s\n", buf);
+		decode_address(buf, cpu_pda[cpu].icplb_doublefault_addr);
+		printk(KERN_NOTICE "   ICPLB_FAULT_ADDR: %s\n", buf);
 
-		printk(KERN_CONT " CPU=%d\n", current_thread_info()->cpu);
-		if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
-			verbose_printk(KERN_NOTICE
-				"TEXT = 0x%p-0x%p        DATA = 0x%p-0x%p\n"
-				" BSS = 0x%p-0x%p  USER-STACK = 0x%p\n\n",
-				(void *)current->mm->start_code,
-				(void *)current->mm->end_code,
-				(void *)current->mm->start_data,
-				(void *)current->mm->end_data,
-				(void *)current->mm->end_data,
-				(void *)current->mm->brk,
-				(void *)current->mm->start_stack);
-		else
-			verbose_printk(KERN_NOTICE "invalid mm\n");
+		decode_address(buf, fp->retx);
+		printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf);
 	} else
-		verbose_printk(KERN_NOTICE
-			       "No Valid process in current context\n");
-#endif
-}
-
-void dump_bfin_mem(struct pt_regs *fp)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-	unsigned short *addr, *erraddr, val = 0, err = 0;
-	char sti = 0, buf[6];
-
-	erraddr = (void *)fp->pc;
-
-	verbose_printk(KERN_NOTICE "return address: [0x%p]; contents of:", erraddr);
-
-	for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10;
-	     addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10;
-	     addr++) {
-		if (!((unsigned long)addr & 0xF))
-			verbose_printk(KERN_NOTICE "0x%p: ", addr);
-
-		if (!get_instruction(&val, addr)) {
-				val = 0;
-				sprintf(buf, "????");
-		} else
-			sprintf(buf, "%04x", val);
-
-		if (addr == erraddr) {
-			verbose_printk("[%s]", buf);
-			err = val;
-		} else
-			verbose_printk(" %s ", buf);
-
-		/* Do any previous instructions turn on interrupts? */
-		if (addr <= erraddr &&				/* in the past */
-		    ((val >= 0x0040 && val <= 0x0047) ||	/* STI instruction */
-		      val == 0x017b))				/* [SP++] = RETI */
-			sti = 1;
-	}
-
-	verbose_printk("\n");
-
-	/* Hardware error interrupts can be deferred */
-	if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR &&
-	    oops_in_progress)){
-		verbose_printk(KERN_NOTICE "Looks like this was a deferred error - sorry\n");
-#ifndef CONFIG_DEBUG_HWERR
-		verbose_printk(KERN_NOTICE
-"The remaining message may be meaningless\n"
-"You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n");
-#else
-		/* If we are handling only one peripheral interrupt
-		 * and current mm and pid are valid, and the last error
-		 * was in that user space process's text area
-		 * print it out - because that is where the problem exists
-		 */
-		if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) &&
-		     (current->pid && current->mm)) {
-			/* And the last RETI points to the current userspace context */
-			if ((fp + 1)->pc >= current->mm->start_code &&
-			    (fp + 1)->pc <= current->mm->end_code) {
-				verbose_printk(KERN_NOTICE "It might be better to look around here :\n");
-				verbose_printk(KERN_NOTICE "-------------------------------------------\n");
-				show_regs(fp + 1);
-				verbose_printk(KERN_NOTICE "-------------------------------------------\n");
-			}
-		}
-#endif
-	}
 #endif
-}
-
-void show_regs(struct pt_regs *fp)
-{
-#ifdef CONFIG_DEBUG_VERBOSE
-	char buf [150];
-	struct irqaction *action;
-	unsigned int i;
-	unsigned long flags = 0;
-	unsigned int cpu = raw_smp_processor_id();
-	unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
-
-	verbose_printk(KERN_NOTICE "\n");
-	if (CPUID != bfin_cpuid())
-		verbose_printk(KERN_NOTICE "Compiled for cpu family 0x%04x (Rev %d), "
-			"but running on:0x%04x (Rev %d)\n",
-			CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid());
-
-	verbose_printk(KERN_NOTICE "ADSP-%s-0.%d",
-		CPU, bfin_compiled_revid());
-
-	if (bfin_compiled_revid() !=  bfin_revid())
-		verbose_printk("(Detected 0.%d)", bfin_revid());
-
-	verbose_printk(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n",
-		get_cclk()/1000000, get_sclk()/1000000,
-#ifdef CONFIG_MPU
-		"mpu on"
-#else
-		"mpu off"
-#endif
-		);
-
-	verbose_printk(KERN_NOTICE "%s", linux_banner);
-
-	verbose_printk(KERN_NOTICE "\nSEQUENCER STATUS:\t\t%s\n", print_tainted());
-	verbose_printk(KERN_NOTICE " SEQSTAT: %08lx  IPEND: %04lx  IMASK: %04lx  SYSCFG: %04lx\n",
-		(long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg);
-	if (fp->ipend & EVT_IRPTEN)
-		verbose_printk(KERN_NOTICE "  Global Interrupts Disabled (IPEND[4])\n");
-	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 |
-			EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR)))
-		verbose_printk(KERN_NOTICE "  Peripheral interrupts masked off\n");
-	if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14)))
-		verbose_printk(KERN_NOTICE "  Kernel interrupts masked off\n");
-	if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) {
-		verbose_printk(KERN_NOTICE "  HWERRCAUSE: 0x%lx\n",
-			(fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14);
-#ifdef EBIU_ERRMST
-		/* If the error was from the EBIU, print it out */
-		if (bfin_read_EBIU_ERRMST() & CORE_ERROR) {
-			verbose_printk(KERN_NOTICE "  EBIU Error Reason  : 0x%04x\n",
-				bfin_read_EBIU_ERRMST());
-			verbose_printk(KERN_NOTICE "  EBIU Error Address : 0x%08x\n",
-				bfin_read_EBIU_ERRADD());
-		}
-#endif
-	}
-	verbose_printk(KERN_NOTICE "  EXCAUSE   : 0x%lx\n",
-		fp->seqstat & SEQSTAT_EXCAUSE);
-	for (i = 2; i <= 15 ; i++) {
-		if (fp->ipend & (1 << i)) {
-			if (i != 4) {
-				decode_address(buf, bfin_read32(EVT0 + 4*i));
-				verbose_printk(KERN_NOTICE "  physical IVG%i asserted : %s\n", i, buf);
-			} else
-				verbose_printk(KERN_NOTICE "  interrupts disabled\n");
-		}
-	}
-
-	/* if no interrupts are going off, don't print this out */
-	if (fp->ipend & ~0x3F) {
-		for (i = 0; i < (NR_IRQS - 1); i++) {
-			if (!in_atomic)
-				raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
-
-			action = irq_desc[i].action;
-			if (!action)
-				goto unlock;
-
-			decode_address(buf, (unsigned int)action->handler);
-			verbose_printk(KERN_NOTICE "  logical irq %3d mapped  : %s", i, buf);
-			for (action = action->next; action; action = action->next) {
-				decode_address(buf, (unsigned int)action->handler);
-				verbose_printk(", %s", buf);
-			}
-			verbose_printk("\n");
-unlock:
-			if (!in_atomic)
-				raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-		}
-	}
-
-	decode_address(buf, fp->rete);
-	verbose_printk(KERN_NOTICE " RETE: %s\n", buf);
-	decode_address(buf, fp->retn);
-	verbose_printk(KERN_NOTICE " RETN: %s\n", buf);
-	decode_address(buf, fp->retx);
-	verbose_printk(KERN_NOTICE " RETX: %s\n", buf);
-	decode_address(buf, fp->rets);
-	verbose_printk(KERN_NOTICE " RETS: %s\n", buf);
-	decode_address(buf, fp->pc);
-	verbose_printk(KERN_NOTICE " PC  : %s\n", buf);
-
-	if (((long)fp->seqstat &  SEQSTAT_EXCAUSE) &&
-	    (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) {
-		decode_address(buf, cpu_pda[cpu].dcplb_fault_addr);
-		verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf);
-		decode_address(buf, cpu_pda[cpu].icplb_fault_addr);
-		verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf);
+	{
+		dump_bfin_process(fp);
+		dump_bfin_mem(fp);
+		show_regs(fp);
+		dump_bfin_trace_buffer();
 	}
-
-	verbose_printk(KERN_NOTICE "PROCESSOR STATE:\n");
-	verbose_printk(KERN_NOTICE " R0 : %08lx    R1 : %08lx    R2 : %08lx    R3 : %08lx\n",
-		fp->r0, fp->r1, fp->r2, fp->r3);
-	verbose_printk(KERN_NOTICE " R4 : %08lx    R5 : %08lx    R6 : %08lx    R7 : %08lx\n",
-		fp->r4, fp->r5, fp->r6, fp->r7);
-	verbose_printk(KERN_NOTICE " P0 : %08lx    P1 : %08lx    P2 : %08lx    P3 : %08lx\n",
-		fp->p0, fp->p1, fp->p2, fp->p3);
-	verbose_printk(KERN_NOTICE " P4 : %08lx    P5 : %08lx    FP : %08lx    SP : %08lx\n",
-		fp->p4, fp->p5, fp->fp, (long)fp);
-	verbose_printk(KERN_NOTICE " LB0: %08lx    LT0: %08lx    LC0: %08lx\n",
-		fp->lb0, fp->lt0, fp->lc0);
-	verbose_printk(KERN_NOTICE " LB1: %08lx    LT1: %08lx    LC1: %08lx\n",
-		fp->lb1, fp->lt1, fp->lc1);
-	verbose_printk(KERN_NOTICE " B0 : %08lx    L0 : %08lx    M0 : %08lx    I0 : %08lx\n",
-		fp->b0, fp->l0, fp->m0, fp->i0);
-	verbose_printk(KERN_NOTICE " B1 : %08lx    L1 : %08lx    M1 : %08lx    I1 : %08lx\n",
-		fp->b1, fp->l1, fp->m1, fp->i1);
-	verbose_printk(KERN_NOTICE " B2 : %08lx    L2 : %08lx    M2 : %08lx    I2 : %08lx\n",
-		fp->b2, fp->l2, fp->m2, fp->i2);
-	verbose_printk(KERN_NOTICE " B3 : %08lx    L3 : %08lx    M3 : %08lx    I3 : %08lx\n",
-		fp->b3, fp->l3, fp->m3, fp->i3);
-	verbose_printk(KERN_NOTICE "A0.w: %08lx   A0.x: %08lx   A1.w: %08lx   A1.x: %08lx\n",
-		fp->a0w, fp->a0x, fp->a1w, fp->a1x);
-
-	verbose_printk(KERN_NOTICE "USP : %08lx  ASTAT: %08lx\n",
-		rdusp(), fp->astat);
-
-	verbose_printk(KERN_NOTICE "\n");
 #endif
-}
-
-#ifdef CONFIG_SYS_BFIN_SPINLOCK_L1
-asmlinkage int sys_bfin_spinlock(int *spinlock)__attribute__((l1_text));
-#endif
-
-static DEFINE_SPINLOCK(bfin_spinlock_lock);
-
-asmlinkage int sys_bfin_spinlock(int *p)
-{
-	int ret, tmp = 0;
-
-	spin_lock(&bfin_spinlock_lock);	/* This would also hold kernel preemption. */
-	ret = get_user(tmp, p);
-	if (likely(ret == 0)) {
-		if (unlikely(tmp))
-			ret = 1;
-		else
-			put_user(1, p);
-	}
-	spin_unlock(&bfin_spinlock_lock);
-	return ret;
-}
-
-int bfin_request_exception(unsigned int exception, void (*handler)(void))
-{
-	void (*curr_handler)(void);
-
-	if (exception > 0x3F)
-		return -EINVAL;
-
-	curr_handler = ex_table[exception];
-
-	if (curr_handler != ex_replaceable)
-		return -EBUSY;
-
-	ex_table[exception] = handler;
+	panic("Double Fault - unrecoverable event");
 
-	return 0;
 }
-EXPORT_SYMBOL(bfin_request_exception);
-
-int bfin_free_exception(unsigned int exception, void (*handler)(void))
-{
-	void (*curr_handler)(void);
-
-	if (exception > 0x3F)
-		return -EINVAL;
-
-	curr_handler = ex_table[exception];
 
-	if (curr_handler != handler)
-		return -EBUSY;
-
-	ex_table[exception] = ex_replaceable;
-
-	return 0;
-}
-EXPORT_SYMBOL(bfin_free_exception);
 
 void panic_cplb_error(int cplb_panic, struct pt_regs *fp)
 {
@@ -1349,3 +559,23 @@
 	dump_stack();
 	panic("Unrecoverable event");
 }
+
+#ifdef CONFIG_BUG
+int is_valid_bugaddr(unsigned long addr)
+{
+	unsigned int opcode;
+
+	if (!get_instruction(&opcode, (unsigned short *)addr))
+		return 0;
+
+	return opcode == BFIN_BUG_OPCODE;
+}
+#endif
+
+/* stub this out */
+#ifndef CONFIG_DEBUG_VERBOSE
+void show_regs(struct pt_regs *fp)
+{
+
+}
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/lib/memset.S linux-libre-2.6.35-gnu/arch/blackfin/lib/memset.S
--- linux-libre-2.6.34-gnu/arch/blackfin/lib/memset.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/lib/memset.S	2010-08-01 18:11:14.000000000 -0400
@@ -20,6 +20,7 @@
  * R1 = filler byte
  * R2 = count
  * Favours word aligned data.
+ * The strncpy assumes that I0 and I1 are not used in this function
  */
 
 ENTRY(_memset)
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/lib/strcmp.c linux-libre-2.6.35-gnu/arch/blackfin/lib/strcmp.c
--- linux-libre-2.6.34-gnu/arch/blackfin/lib/strcmp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/lib/strcmp.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,19 +0,0 @@
-/*
- * Provide symbol in case str func is not inlined.
- *
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define strcmp __inline_strcmp
-#include <asm/string.h>
-#undef strcmp
-
-#include <linux/module.h>
-
-int strcmp(const char *dest, const char *src)
-{
-	return __inline_strcmp(dest, src);
-}
-EXPORT_SYMBOL(strcmp);
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/lib/strcmp.S linux-libre-2.6.35-gnu/arch/blackfin/lib/strcmp.S
--- linux-libre-2.6.34-gnu/arch/blackfin/lib/strcmp.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/blackfin/lib/strcmp.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *strcmp(char *s1, const char *s2);
+ * R0 = address (s1)
+ * R1 = address (s2)
+ *
+ * Returns an integer less than, equal to, or greater than zero if s1
+ *  (or the first n  bytes thereof) is found, respectively, to be less
+ *  than, to match, or be greater than s2.
+ */
+
+#ifdef CONFIG_STRCMP_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strcmp)
+	P0 = R0 ;       /* s1 */
+	P1 = R1 ;       /* s2 */
+
+1:
+	R0 = B[P0++] (Z);      /* get *s1 */
+	R1 = B[P1++] (Z);      /* get *s2 */
+	CC = R0 == R1;         /* compare a byte */
+	if ! cc jump 2f;       /* not equal, break out */
+	CC = R0;               /* at end of s1? */
+	if cc jump 1b (bp);    /* no, keep going */
+	jump.s 3f;             /* strings are equal */
+2:
+	R0 = R0 - R1;          /* *s1 - *s2 */
+3:
+	RTS;
+
+ENDPROC(_strcmp)
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/lib/strcpy.c linux-libre-2.6.35-gnu/arch/blackfin/lib/strcpy.c
--- linux-libre-2.6.34-gnu/arch/blackfin/lib/strcpy.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/lib/strcpy.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,19 +0,0 @@
-/*
- * Provide symbol in case str func is not inlined.
- *
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define strcpy __inline_strcpy
-#include <asm/string.h>
-#undef strcpy
-
-#include <linux/module.h>
-
-char *strcpy(char *dest, const char *src)
-{
-	return __inline_strcpy(dest, src);
-}
-EXPORT_SYMBOL(strcpy);
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/lib/strcpy.S linux-libre-2.6.35-gnu/arch/blackfin/lib/strcpy.S
--- linux-libre-2.6.34-gnu/arch/blackfin/lib/strcpy.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/blackfin/lib/strcpy.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *strcpy(char *dest, const char *src);
+ * R0 = address (dest)
+ * R1 = address (src)
+ *
+ * Returns a pointer to the destination string dest
+ */
+
+#ifdef CONFIG_STRCPY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strcpy)
+	P0 = R0 ;       /* dst*/
+	P1 = R1 ;       /* src*/
+
+1:
+	R1 = B [P1++] (Z);
+	B [P0++] = R1;
+	CC = R1;
+	if cc jump 1b (bp);
+	RTS;
+
+ENDPROC(_strcpy)
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/lib/strncmp.c linux-libre-2.6.35-gnu/arch/blackfin/lib/strncmp.c
--- linux-libre-2.6.34-gnu/arch/blackfin/lib/strncmp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/lib/strncmp.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,18 +0,0 @@
-/*
- * Provide symbol in case str func is not inlined.
- *
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define strncmp __inline_strncmp
-#include <asm/string.h>
-#include <linux/module.h>
-#undef strncmp
-
-int strncmp(const char *cs, const char *ct, size_t count)
-{
-	return __inline_strncmp(cs, ct, count);
-}
-EXPORT_SYMBOL(strncmp);
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/lib/strncmp.S linux-libre-2.6.35-gnu/arch/blackfin/lib/strncmp.S
--- linux-libre-2.6.34-gnu/arch/blackfin/lib/strncmp.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/blackfin/lib/strncmp.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+
+/* void *strncpy(char *s1, const char *s2, size_t n);
+ * R0 = address (dest)
+ * R1 = address (src)
+ * R2 = size (n)
+ * Returns a pointer to the destination string dest
+ */
+
+#ifdef CONFIG_STRNCMP_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strncmp)
+	CC = R2 == 0;
+	if CC JUMP 5f;
+
+	P0 = R0 ;       /* s1 */
+	P1 = R1 ;       /* s2 */
+1:
+	R0 = B[P0++] (Z);      /* get *s1 */
+	R1 = B[P1++] (Z);      /* get *s2 */
+	CC = R0 == R1;         /* compare a byte */
+	if ! cc jump 3f;       /* not equal, break out */
+	CC = R0;               /* at end of s1? */
+	if ! cc jump 4f;       /* yes, all done */
+	R2 += -1;              /* no, adjust count */
+	CC = R2 == 0;
+	if ! cc jump 1b (bp);  /* more to do, keep going */
+2:
+	R0 = 0;                /* strings are equal */
+	jump.s 4f;
+3:
+	R0 = R0 - R1;          /* *s1 - *s2 */
+4:
+	RTS;
+
+5:
+	R0 = 0;
+	RTS;
+
+ENDPROC(_strncmp)
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/lib/strncpy.c linux-libre-2.6.35-gnu/arch/blackfin/lib/strncpy.c
--- linux-libre-2.6.34-gnu/arch/blackfin/lib/strncpy.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/lib/strncpy.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,19 +0,0 @@
-/*
- * Provide symbol in case str func is not inlined.
- *
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#define strncpy __inline_strncpy
-#include <asm/string.h>
-#undef strncpy
-
-#include <linux/module.h>
-
-char *strncpy(char *dest, const char *src, size_t n)
-{
-	return __inline_strncpy(dest, src, n);
-}
-EXPORT_SYMBOL(strncpy);
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/lib/strncpy.S linux-libre-2.6.35-gnu/arch/blackfin/lib/strncpy.S
--- linux-libre-2.6.34-gnu/arch/blackfin/lib/strncpy.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/blackfin/lib/strncpy.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2005-2010 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
+#include <linux/linkage.h>
+#include <asm/context.S>
+
+/* void *strncpy(char *dest, const char *src, size_t n);
+ * R0 = address (dest)
+ * R1 = address (src)
+ * R2 = size
+ * Returns a pointer (R0) to the destination string dest
+ *  we do this by not changing R0
+ */
+
+#ifdef CONFIG_STRNCPY_L1
+.section .l1.text
+#else
+.text
+#endif
+
+.align 2
+
+ENTRY(_strncpy)
+	CC = R2 == 0;
+	if CC JUMP 4f;
+
+	P2 = R2 ;       /* size */
+	P0 = R0 ;       /* dst*/
+	P1 = R1 ;       /* src*/
+
+	LSETUP (1f, 2f) LC0 = P2;
+1:
+	R1 = B [P1++] (Z);
+	B [P0++] = R1;
+	CC = R1 == 0;
+2:
+	if CC jump 3f;
+
+	RTS;
+
+	/* if src is shorter than n, we need to null pad bytes in dest
+	 * but, we can get here when the last byte is zero, and we don't
+	 * want to copy an extra byte at the end, so we need to check
+	 */
+3:
+	R2 = LC0;
+	CC = R2
+	if ! CC jump 6f;
+
+	/* if the required null padded portion is small, do it here, rather than
+	 * handling the overhead of memset (which is OK when things are big).
+	 */
+	R3 = 0x20;
+	CC = R2 < R3;
+	IF CC jump 4f;
+
+	R2 += -1;
+
+	/* Set things up for memset
+	 * R0 = address
+	 * R1 = filler byte (this case it's zero, set above)
+	 * R2 = count (set above)
+	 */
+
+	I1 = R0;
+	R0 = RETS;
+	I0 = R0;
+	R0 = P0;
+	pseudo_long_call _memset, p0;
+	R0 = I0;
+	RETS = R0;
+	R0 = I1;
+	RTS;
+
+4:
+	LSETUP(5f, 5f) LC0;
+5:
+	B [P0++] = R1;
+6:
+	RTS;
+
+ENDPROC(_strncpy)
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-bf527/boards/cm_bf527.c linux-libre-2.6.35-gnu/arch/blackfin/mach-bf527/boards/cm_bf527.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-bf527/boards/cm_bf527.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-bf527/boards/cm_bf527.c	2010-08-01 18:11:14.000000000 -0400
@@ -98,6 +98,10 @@
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PF11,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-bf527/boards/ezbrd.c linux-libre-2.6.35-gnu/arch/blackfin/mach-bf527/boards/ezbrd.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-bf527/boards/ezbrd.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-bf527/boards/ezbrd.c	2010-08-01 18:11:14.000000000 -0400
@@ -62,6 +62,10 @@
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PG13,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-bf527/boards/ezkit.c linux-libre-2.6.35-gnu/arch/blackfin/mach-bf527/boards/ezkit.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-bf527/boards/ezkit.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-bf527/boards/ezkit.c	2010-08-01 18:11:14.000000000 -0400
@@ -102,6 +102,10 @@
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PG13,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-bf537/boards/minotaur.c linux-libre-2.6.35-gnu/arch/blackfin/mach-bf537/boards/minotaur.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-bf537/boards/minotaur.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-bf537/boards/minotaur.c	2010-08-01 18:11:14.000000000 -0400
@@ -23,12 +23,13 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
+#include <asm/portmux.h>
 #include <linux/spi/ad7877.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
  */
-char *bfin_board_name = "CamSig Minotaur BF537";
+const char bfin_board_name[] = "CamSig Minotaur BF537";
 
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 static struct resource bfin_pcmcia_cf_resources[] = {
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-bf537/include/mach/defBF534.h linux-libre-2.6.35-gnu/arch/blackfin/mach-bf537/include/mach/defBF534.h
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-bf537/include/mach/defBF534.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-bf537/include/mach/defBF534.h	2010-08-01 18:11:14.000000000 -0400
@@ -1702,628 +1702,6 @@
 #define	RCV_HALF	0x0004	/*              Receive FIFO Has 1 Byte To Read                 */
 #define	RCV_FULL	0x000C	/*              Receive FIFO Full (2 Bytes To Read)             */
 
-/* ************  CONTROLLER AREA NETWORK (CAN) MASKS  ***************/
-/* CAN_CONTROL Masks												*/
-#define	SRS			0x0001	/* Software Reset                                               */
-#define	DNM			0x0002	/* Device Net Mode                                              */
-#define	ABO			0x0004	/* Auto-Bus On Enable                                   */
-#define	TXPRIO		0x0008	/* TX Priority (Priority/Mailbox*)              */
-#define	WBA			0x0010	/* Wake-Up On CAN Bus Activity Enable   */
-#define	SMR			0x0020	/* Sleep Mode Request                                   */
-#define	CSR			0x0040	/* CAN Suspend Mode Request                             */
-#define	CCR			0x0080	/* CAN Configuration Mode Request               */
-
-/* CAN_STATUS Masks												*/
-#define	WT			0x0001	/* TX Warning Flag                                      */
-#define	WR			0x0002	/* RX Warning Flag                                      */
-#define	EP			0x0004	/* Error Passive Mode                           */
-#define	EBO			0x0008	/* Error Bus Off Mode                           */
-#define	SMA			0x0020	/* Sleep Mode Acknowledge                       */
-#define	CSA			0x0040	/* Suspend Mode Acknowledge                     */
-#define	CCA			0x0080	/* Configuration Mode Acknowledge       */
-#define	MBPTR		0x1F00	/* Mailbox Pointer                                      */
-#define	TRM			0x4000	/* Transmit Mode                                        */
-#define	REC			0x8000	/* Receive Mode                                         */
-
-/* CAN_CLOCK Masks									*/
-#define	BRP			0x03FF	/* Bit-Rate Pre-Scaler  */
-
-/* CAN_TIMING Masks											*/
-#define	TSEG1		0x000F	/* Time Segment 1                               */
-#define	TSEG2		0x0070	/* Time Segment 2                               */
-#define	SAM			0x0080	/* Sampling                                             */
-#define	SJW			0x0300	/* Synchronization Jump Width   */
-
-/* CAN_DEBUG Masks											*/
-#define	DEC			0x0001	/* Disable CAN Error Counters   */
-#define	DRI			0x0002	/* Disable CAN RX Input                 */
-#define	DTO			0x0004	/* Disable CAN TX Output                */
-#define	DIL			0x0008	/* Disable CAN Internal Loop    */
-#define	MAA			0x0010	/* Mode Auto-Acknowledge Enable */
-#define	MRB			0x0020	/* Mode Read Back Enable                */
-#define	CDE			0x8000	/* CAN Debug Enable                             */
-
-/* CAN_CEC Masks										*/
-#define	RXECNT		0x00FF	/* Receive Error Counter        */
-#define	TXECNT		0xFF00	/* Transmit Error Counter       */
-
-/* CAN_INTR Masks											*/
-#define	MBRIRQ	0x0001	/* Mailbox Receive Interrupt	*/
-#define	MBRIF		MBRIRQ	/* legacy */
-#define	MBTIRQ	0x0002	/* Mailbox Transmit Interrupt	*/
-#define	MBTIF		MBTIRQ	/* legacy */
-#define	GIRQ		0x0004	/* Global Interrupt                             */
-#define	SMACK		0x0008	/* Sleep Mode Acknowledge               */
-#define	CANTX		0x0040	/* CAN TX Bus Value                             */
-#define	CANRX		0x0080	/* CAN RX Bus Value                             */
-
-/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks										*/
-#define DFC			0xFFFF	/* Data Filtering Code (If Enabled) (ID0)               */
-#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (ID0)   */
-#define	EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (ID1)    */
-#define	BASEID		0x1FFC	/* Base Identifier                                                              */
-#define	IDE			0x2000	/* Identifier Extension                                                 */
-#define	RTR			0x4000	/* Remote Frame Transmission Request                    */
-#define	AME			0x8000	/* Acceptance Mask Enable                                               */
-
-/* CAN_MBxx_TIMESTAMP Masks					*/
-#define TSV			0xFFFF	/* Timestamp    */
-
-/* CAN_MBxx_LENGTH Masks						*/
-#define DLC			0x000F	/* Data Length Code     */
-
-/* CAN_AMxxH and CAN_AMxxL Masks												*/
-#define DFM			0xFFFF	/* Data Field Mask (If Enabled) (CAN_AMxxL)                     */
-#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier (CAN_AMxxL)     */
-#define	EXTID_HI	0x0003	/* Upper 2 Bits of Extended Identifier (CAN_AMxxH)      */
-#define	BASEID		0x1FFC	/* Base Identifier                                                                      */
-#define	AMIDE		0x2000	/* Acceptance Mask ID Extension Enable                          */
-#define	FMD			0x4000	/* Full Mask Data Field Enable                                          */
-#define	FDF			0x8000	/* Filter On Data Field Enable                                          */
-
-/* CAN_MC1 Masks									*/
-#define	MC0			0x0001	/* Enable Mailbox 0             */
-#define	MC1			0x0002	/* Enable Mailbox 1             */
-#define	MC2			0x0004	/* Enable Mailbox 2             */
-#define	MC3			0x0008	/* Enable Mailbox 3             */
-#define	MC4			0x0010	/* Enable Mailbox 4             */
-#define	MC5			0x0020	/* Enable Mailbox 5             */
-#define	MC6			0x0040	/* Enable Mailbox 6             */
-#define	MC7			0x0080	/* Enable Mailbox 7             */
-#define	MC8			0x0100	/* Enable Mailbox 8             */
-#define	MC9			0x0200	/* Enable Mailbox 9             */
-#define	MC10		0x0400	/* Enable Mailbox 10    */
-#define	MC11		0x0800	/* Enable Mailbox 11    */
-#define	MC12		0x1000	/* Enable Mailbox 12    */
-#define	MC13		0x2000	/* Enable Mailbox 13    */
-#define	MC14		0x4000	/* Enable Mailbox 14    */
-#define	MC15		0x8000	/* Enable Mailbox 15    */
-
-/* CAN_MC2 Masks									*/
-#define	MC16		0x0001	/* Enable Mailbox 16    */
-#define	MC17		0x0002	/* Enable Mailbox 17    */
-#define	MC18		0x0004	/* Enable Mailbox 18    */
-#define	MC19		0x0008	/* Enable Mailbox 19    */
-#define	MC20		0x0010	/* Enable Mailbox 20    */
-#define	MC21		0x0020	/* Enable Mailbox 21    */
-#define	MC22		0x0040	/* Enable Mailbox 22    */
-#define	MC23		0x0080	/* Enable Mailbox 23    */
-#define	MC24		0x0100	/* Enable Mailbox 24    */
-#define	MC25		0x0200	/* Enable Mailbox 25    */
-#define	MC26		0x0400	/* Enable Mailbox 26    */
-#define	MC27		0x0800	/* Enable Mailbox 27    */
-#define	MC28		0x1000	/* Enable Mailbox 28    */
-#define	MC29		0x2000	/* Enable Mailbox 29    */
-#define	MC30		0x4000	/* Enable Mailbox 30    */
-#define	MC31		0x8000	/* Enable Mailbox 31    */
-
-/* CAN_MD1 Masks												*/
-#define	MD0			0x0001	/* Enable Mailbox 0 For Receive         */
-#define	MD1			0x0002	/* Enable Mailbox 1 For Receive         */
-#define	MD2			0x0004	/* Enable Mailbox 2 For Receive         */
-#define	MD3			0x0008	/* Enable Mailbox 3 For Receive         */
-#define	MD4			0x0010	/* Enable Mailbox 4 For Receive         */
-#define	MD5			0x0020	/* Enable Mailbox 5 For Receive         */
-#define	MD6			0x0040	/* Enable Mailbox 6 For Receive         */
-#define	MD7			0x0080	/* Enable Mailbox 7 For Receive         */
-#define	MD8			0x0100	/* Enable Mailbox 8 For Receive         */
-#define	MD9			0x0200	/* Enable Mailbox 9 For Receive         */
-#define	MD10		0x0400	/* Enable Mailbox 10 For Receive        */
-#define	MD11		0x0800	/* Enable Mailbox 11 For Receive        */
-#define	MD12		0x1000	/* Enable Mailbox 12 For Receive        */
-#define	MD13		0x2000	/* Enable Mailbox 13 For Receive        */
-#define	MD14		0x4000	/* Enable Mailbox 14 For Receive        */
-#define	MD15		0x8000	/* Enable Mailbox 15 For Receive        */
-
-/* CAN_MD2 Masks												*/
-#define	MD16		0x0001	/* Enable Mailbox 16 For Receive        */
-#define	MD17		0x0002	/* Enable Mailbox 17 For Receive        */
-#define	MD18		0x0004	/* Enable Mailbox 18 For Receive        */
-#define	MD19		0x0008	/* Enable Mailbox 19 For Receive        */
-#define	MD20		0x0010	/* Enable Mailbox 20 For Receive        */
-#define	MD21		0x0020	/* Enable Mailbox 21 For Receive        */
-#define	MD22		0x0040	/* Enable Mailbox 22 For Receive        */
-#define	MD23		0x0080	/* Enable Mailbox 23 For Receive        */
-#define	MD24		0x0100	/* Enable Mailbox 24 For Receive        */
-#define	MD25		0x0200	/* Enable Mailbox 25 For Receive        */
-#define	MD26		0x0400	/* Enable Mailbox 26 For Receive        */
-#define	MD27		0x0800	/* Enable Mailbox 27 For Receive        */
-#define	MD28		0x1000	/* Enable Mailbox 28 For Receive        */
-#define	MD29		0x2000	/* Enable Mailbox 29 For Receive        */
-#define	MD30		0x4000	/* Enable Mailbox 30 For Receive        */
-#define	MD31		0x8000	/* Enable Mailbox 31 For Receive        */
-
-/* CAN_RMP1 Masks												*/
-#define	RMP0		0x0001	/* RX Message Pending In Mailbox 0      */
-#define	RMP1		0x0002	/* RX Message Pending In Mailbox 1      */
-#define	RMP2		0x0004	/* RX Message Pending In Mailbox 2      */
-#define	RMP3		0x0008	/* RX Message Pending In Mailbox 3      */
-#define	RMP4		0x0010	/* RX Message Pending In Mailbox 4      */
-#define	RMP5		0x0020	/* RX Message Pending In Mailbox 5      */
-#define	RMP6		0x0040	/* RX Message Pending In Mailbox 6      */
-#define	RMP7		0x0080	/* RX Message Pending In Mailbox 7      */
-#define	RMP8		0x0100	/* RX Message Pending In Mailbox 8      */
-#define	RMP9		0x0200	/* RX Message Pending In Mailbox 9      */
-#define	RMP10		0x0400	/* RX Message Pending In Mailbox 10     */
-#define	RMP11		0x0800	/* RX Message Pending In Mailbox 11     */
-#define	RMP12		0x1000	/* RX Message Pending In Mailbox 12     */
-#define	RMP13		0x2000	/* RX Message Pending In Mailbox 13     */
-#define	RMP14		0x4000	/* RX Message Pending In Mailbox 14     */
-#define	RMP15		0x8000	/* RX Message Pending In Mailbox 15     */
-
-/* CAN_RMP2 Masks												*/
-#define	RMP16		0x0001	/* RX Message Pending In Mailbox 16     */
-#define	RMP17		0x0002	/* RX Message Pending In Mailbox 17     */
-#define	RMP18		0x0004	/* RX Message Pending In Mailbox 18     */
-#define	RMP19		0x0008	/* RX Message Pending In Mailbox 19     */
-#define	RMP20		0x0010	/* RX Message Pending In Mailbox 20     */
-#define	RMP21		0x0020	/* RX Message Pending In Mailbox 21     */
-#define	RMP22		0x0040	/* RX Message Pending In Mailbox 22     */
-#define	RMP23		0x0080	/* RX Message Pending In Mailbox 23     */
-#define	RMP24		0x0100	/* RX Message Pending In Mailbox 24     */
-#define	RMP25		0x0200	/* RX Message Pending In Mailbox 25     */
-#define	RMP26		0x0400	/* RX Message Pending In Mailbox 26     */
-#define	RMP27		0x0800	/* RX Message Pending In Mailbox 27     */
-#define	RMP28		0x1000	/* RX Message Pending In Mailbox 28     */
-#define	RMP29		0x2000	/* RX Message Pending In Mailbox 29     */
-#define	RMP30		0x4000	/* RX Message Pending In Mailbox 30     */
-#define	RMP31		0x8000	/* RX Message Pending In Mailbox 31     */
-
-/* CAN_RML1 Masks												*/
-#define	RML0		0x0001	/* RX Message Lost In Mailbox 0         */
-#define	RML1		0x0002	/* RX Message Lost In Mailbox 1         */
-#define	RML2		0x0004	/* RX Message Lost In Mailbox 2         */
-#define	RML3		0x0008	/* RX Message Lost In Mailbox 3         */
-#define	RML4		0x0010	/* RX Message Lost In Mailbox 4         */
-#define	RML5		0x0020	/* RX Message Lost In Mailbox 5         */
-#define	RML6		0x0040	/* RX Message Lost In Mailbox 6         */
-#define	RML7		0x0080	/* RX Message Lost In Mailbox 7         */
-#define	RML8		0x0100	/* RX Message Lost In Mailbox 8         */
-#define	RML9		0x0200	/* RX Message Lost In Mailbox 9         */
-#define	RML10		0x0400	/* RX Message Lost In Mailbox 10        */
-#define	RML11		0x0800	/* RX Message Lost In Mailbox 11        */
-#define	RML12		0x1000	/* RX Message Lost In Mailbox 12        */
-#define	RML13		0x2000	/* RX Message Lost In Mailbox 13        */
-#define	RML14		0x4000	/* RX Message Lost In Mailbox 14        */
-#define	RML15		0x8000	/* RX Message Lost In Mailbox 15        */
-
-/* CAN_RML2 Masks												*/
-#define	RML16		0x0001	/* RX Message Lost In Mailbox 16        */
-#define	RML17		0x0002	/* RX Message Lost In Mailbox 17        */
-#define	RML18		0x0004	/* RX Message Lost In Mailbox 18        */
-#define	RML19		0x0008	/* RX Message Lost In Mailbox 19        */
-#define	RML20		0x0010	/* RX Message Lost In Mailbox 20        */
-#define	RML21		0x0020	/* RX Message Lost In Mailbox 21        */
-#define	RML22		0x0040	/* RX Message Lost In Mailbox 22        */
-#define	RML23		0x0080	/* RX Message Lost In Mailbox 23        */
-#define	RML24		0x0100	/* RX Message Lost In Mailbox 24        */
-#define	RML25		0x0200	/* RX Message Lost In Mailbox 25        */
-#define	RML26		0x0400	/* RX Message Lost In Mailbox 26        */
-#define	RML27		0x0800	/* RX Message Lost In Mailbox 27        */
-#define	RML28		0x1000	/* RX Message Lost In Mailbox 28        */
-#define	RML29		0x2000	/* RX Message Lost In Mailbox 29        */
-#define	RML30		0x4000	/* RX Message Lost In Mailbox 30        */
-#define	RML31		0x8000	/* RX Message Lost In Mailbox 31        */
-
-/* CAN_OPSS1 Masks																				*/
-#define	OPSS0		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0       */
-#define	OPSS1		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1       */
-#define	OPSS2		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2       */
-#define	OPSS3		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3       */
-#define	OPSS4		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4       */
-#define	OPSS5		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5       */
-#define	OPSS6		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6       */
-#define	OPSS7		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7       */
-#define	OPSS8		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8       */
-#define	OPSS9		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9       */
-#define	OPSS10		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10      */
-#define	OPSS11		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11      */
-#define	OPSS12		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12      */
-#define	OPSS13		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13      */
-#define	OPSS14		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14      */
-#define	OPSS15		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15      */
-
-/* CAN_OPSS2 Masks																				*/
-#define	OPSS16		0x0001	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16      */
-#define	OPSS17		0x0002	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17      */
-#define	OPSS18		0x0004	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18      */
-#define	OPSS19		0x0008	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19      */
-#define	OPSS20		0x0010	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20      */
-#define	OPSS21		0x0020	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21      */
-#define	OPSS22		0x0040	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22      */
-#define	OPSS23		0x0080	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23      */
-#define	OPSS24		0x0100	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24      */
-#define	OPSS25		0x0200	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25      */
-#define	OPSS26		0x0400	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26      */
-#define	OPSS27		0x0800	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27      */
-#define	OPSS28		0x1000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28      */
-#define	OPSS29		0x2000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29      */
-#define	OPSS30		0x4000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30      */
-#define	OPSS31		0x8000	/* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31      */
-
-/* CAN_TRR1 Masks														*/
-#define	TRR0		0x0001	/* Deny But Don't Lock Access To Mailbox 0      */
-#define	TRR1		0x0002	/* Deny But Don't Lock Access To Mailbox 1      */
-#define	TRR2		0x0004	/* Deny But Don't Lock Access To Mailbox 2      */
-#define	TRR3		0x0008	/* Deny But Don't Lock Access To Mailbox 3      */
-#define	TRR4		0x0010	/* Deny But Don't Lock Access To Mailbox 4      */
-#define	TRR5		0x0020	/* Deny But Don't Lock Access To Mailbox 5      */
-#define	TRR6		0x0040	/* Deny But Don't Lock Access To Mailbox 6      */
-#define	TRR7		0x0080	/* Deny But Don't Lock Access To Mailbox 7      */
-#define	TRR8		0x0100	/* Deny But Don't Lock Access To Mailbox 8      */
-#define	TRR9		0x0200	/* Deny But Don't Lock Access To Mailbox 9      */
-#define	TRR10		0x0400	/* Deny But Don't Lock Access To Mailbox 10     */
-#define	TRR11		0x0800	/* Deny But Don't Lock Access To Mailbox 11     */
-#define	TRR12		0x1000	/* Deny But Don't Lock Access To Mailbox 12     */
-#define	TRR13		0x2000	/* Deny But Don't Lock Access To Mailbox 13     */
-#define	TRR14		0x4000	/* Deny But Don't Lock Access To Mailbox 14     */
-#define	TRR15		0x8000	/* Deny But Don't Lock Access To Mailbox 15     */
-
-/* CAN_TRR2 Masks														*/
-#define	TRR16		0x0001	/* Deny But Don't Lock Access To Mailbox 16     */
-#define	TRR17		0x0002	/* Deny But Don't Lock Access To Mailbox 17     */
-#define	TRR18		0x0004	/* Deny But Don't Lock Access To Mailbox 18     */
-#define	TRR19		0x0008	/* Deny But Don't Lock Access To Mailbox 19     */
-#define	TRR20		0x0010	/* Deny But Don't Lock Access To Mailbox 20     */
-#define	TRR21		0x0020	/* Deny But Don't Lock Access To Mailbox 21     */
-#define	TRR22		0x0040	/* Deny But Don't Lock Access To Mailbox 22     */
-#define	TRR23		0x0080	/* Deny But Don't Lock Access To Mailbox 23     */
-#define	TRR24		0x0100	/* Deny But Don't Lock Access To Mailbox 24     */
-#define	TRR25		0x0200	/* Deny But Don't Lock Access To Mailbox 25     */
-#define	TRR26		0x0400	/* Deny But Don't Lock Access To Mailbox 26     */
-#define	TRR27		0x0800	/* Deny But Don't Lock Access To Mailbox 27     */
-#define	TRR28		0x1000	/* Deny But Don't Lock Access To Mailbox 28     */
-#define	TRR29		0x2000	/* Deny But Don't Lock Access To Mailbox 29     */
-#define	TRR30		0x4000	/* Deny But Don't Lock Access To Mailbox 30     */
-#define	TRR31		0x8000	/* Deny But Don't Lock Access To Mailbox 31     */
-
-/* CAN_TRS1 Masks													*/
-#define	TRS0		0x0001	/* Remote Frame Request For Mailbox 0   */
-#define	TRS1		0x0002	/* Remote Frame Request For Mailbox 1   */
-#define	TRS2		0x0004	/* Remote Frame Request For Mailbox 2   */
-#define	TRS3		0x0008	/* Remote Frame Request For Mailbox 3   */
-#define	TRS4		0x0010	/* Remote Frame Request For Mailbox 4   */
-#define	TRS5		0x0020	/* Remote Frame Request For Mailbox 5   */
-#define	TRS6		0x0040	/* Remote Frame Request For Mailbox 6   */
-#define	TRS7		0x0080	/* Remote Frame Request For Mailbox 7   */
-#define	TRS8		0x0100	/* Remote Frame Request For Mailbox 8   */
-#define	TRS9		0x0200	/* Remote Frame Request For Mailbox 9   */
-#define	TRS10		0x0400	/* Remote Frame Request For Mailbox 10  */
-#define	TRS11		0x0800	/* Remote Frame Request For Mailbox 11  */
-#define	TRS12		0x1000	/* Remote Frame Request For Mailbox 12  */
-#define	TRS13		0x2000	/* Remote Frame Request For Mailbox 13  */
-#define	TRS14		0x4000	/* Remote Frame Request For Mailbox 14  */
-#define	TRS15		0x8000	/* Remote Frame Request For Mailbox 15  */
-
-/* CAN_TRS2 Masks													*/
-#define	TRS16		0x0001	/* Remote Frame Request For Mailbox 16  */
-#define	TRS17		0x0002	/* Remote Frame Request For Mailbox 17  */
-#define	TRS18		0x0004	/* Remote Frame Request For Mailbox 18  */
-#define	TRS19		0x0008	/* Remote Frame Request For Mailbox 19  */
-#define	TRS20		0x0010	/* Remote Frame Request For Mailbox 20  */
-#define	TRS21		0x0020	/* Remote Frame Request For Mailbox 21  */
-#define	TRS22		0x0040	/* Remote Frame Request For Mailbox 22  */
-#define	TRS23		0x0080	/* Remote Frame Request For Mailbox 23  */
-#define	TRS24		0x0100	/* Remote Frame Request For Mailbox 24  */
-#define	TRS25		0x0200	/* Remote Frame Request For Mailbox 25  */
-#define	TRS26		0x0400	/* Remote Frame Request For Mailbox 26  */
-#define	TRS27		0x0800	/* Remote Frame Request For Mailbox 27  */
-#define	TRS28		0x1000	/* Remote Frame Request For Mailbox 28  */
-#define	TRS29		0x2000	/* Remote Frame Request For Mailbox 29  */
-#define	TRS30		0x4000	/* Remote Frame Request For Mailbox 30  */
-#define	TRS31		0x8000	/* Remote Frame Request For Mailbox 31  */
-
-/* CAN_AA1 Masks												*/
-#define	AA0			0x0001	/* Aborted Message In Mailbox 0         */
-#define	AA1			0x0002	/* Aborted Message In Mailbox 1         */
-#define	AA2			0x0004	/* Aborted Message In Mailbox 2         */
-#define	AA3			0x0008	/* Aborted Message In Mailbox 3         */
-#define	AA4			0x0010	/* Aborted Message In Mailbox 4         */
-#define	AA5			0x0020	/* Aborted Message In Mailbox 5         */
-#define	AA6			0x0040	/* Aborted Message In Mailbox 6         */
-#define	AA7			0x0080	/* Aborted Message In Mailbox 7         */
-#define	AA8			0x0100	/* Aborted Message In Mailbox 8         */
-#define	AA9			0x0200	/* Aborted Message In Mailbox 9         */
-#define	AA10		0x0400	/* Aborted Message In Mailbox 10        */
-#define	AA11		0x0800	/* Aborted Message In Mailbox 11        */
-#define	AA12		0x1000	/* Aborted Message In Mailbox 12        */
-#define	AA13		0x2000	/* Aborted Message In Mailbox 13        */
-#define	AA14		0x4000	/* Aborted Message In Mailbox 14        */
-#define	AA15		0x8000	/* Aborted Message In Mailbox 15        */
-
-/* CAN_AA2 Masks												*/
-#define	AA16		0x0001	/* Aborted Message In Mailbox 16        */
-#define	AA17		0x0002	/* Aborted Message In Mailbox 17        */
-#define	AA18		0x0004	/* Aborted Message In Mailbox 18        */
-#define	AA19		0x0008	/* Aborted Message In Mailbox 19        */
-#define	AA20		0x0010	/* Aborted Message In Mailbox 20        */
-#define	AA21		0x0020	/* Aborted Message In Mailbox 21        */
-#define	AA22		0x0040	/* Aborted Message In Mailbox 22        */
-#define	AA23		0x0080	/* Aborted Message In Mailbox 23        */
-#define	AA24		0x0100	/* Aborted Message In Mailbox 24        */
-#define	AA25		0x0200	/* Aborted Message In Mailbox 25        */
-#define	AA26		0x0400	/* Aborted Message In Mailbox 26        */
-#define	AA27		0x0800	/* Aborted Message In Mailbox 27        */
-#define	AA28		0x1000	/* Aborted Message In Mailbox 28        */
-#define	AA29		0x2000	/* Aborted Message In Mailbox 29        */
-#define	AA30		0x4000	/* Aborted Message In Mailbox 30        */
-#define	AA31		0x8000	/* Aborted Message In Mailbox 31        */
-
-/* CAN_TA1 Masks													*/
-#define	TA0			0x0001	/* Transmit Successful From Mailbox 0   */
-#define	TA1			0x0002	/* Transmit Successful From Mailbox 1   */
-#define	TA2			0x0004	/* Transmit Successful From Mailbox 2   */
-#define	TA3			0x0008	/* Transmit Successful From Mailbox 3   */
-#define	TA4			0x0010	/* Transmit Successful From Mailbox 4   */
-#define	TA5			0x0020	/* Transmit Successful From Mailbox 5   */
-#define	TA6			0x0040	/* Transmit Successful From Mailbox 6   */
-#define	TA7			0x0080	/* Transmit Successful From Mailbox 7   */
-#define	TA8			0x0100	/* Transmit Successful From Mailbox 8   */
-#define	TA9			0x0200	/* Transmit Successful From Mailbox 9   */
-#define	TA10		0x0400	/* Transmit Successful From Mailbox 10  */
-#define	TA11		0x0800	/* Transmit Successful From Mailbox 11  */
-#define	TA12		0x1000	/* Transmit Successful From Mailbox 12  */
-#define	TA13		0x2000	/* Transmit Successful From Mailbox 13  */
-#define	TA14		0x4000	/* Transmit Successful From Mailbox 14  */
-#define	TA15		0x8000	/* Transmit Successful From Mailbox 15  */
-
-/* CAN_TA2 Masks													*/
-#define	TA16		0x0001	/* Transmit Successful From Mailbox 16  */
-#define	TA17		0x0002	/* Transmit Successful From Mailbox 17  */
-#define	TA18		0x0004	/* Transmit Successful From Mailbox 18  */
-#define	TA19		0x0008	/* Transmit Successful From Mailbox 19  */
-#define	TA20		0x0010	/* Transmit Successful From Mailbox 20  */
-#define	TA21		0x0020	/* Transmit Successful From Mailbox 21  */
-#define	TA22		0x0040	/* Transmit Successful From Mailbox 22  */
-#define	TA23		0x0080	/* Transmit Successful From Mailbox 23  */
-#define	TA24		0x0100	/* Transmit Successful From Mailbox 24  */
-#define	TA25		0x0200	/* Transmit Successful From Mailbox 25  */
-#define	TA26		0x0400	/* Transmit Successful From Mailbox 26  */
-#define	TA27		0x0800	/* Transmit Successful From Mailbox 27  */
-#define	TA28		0x1000	/* Transmit Successful From Mailbox 28  */
-#define	TA29		0x2000	/* Transmit Successful From Mailbox 29  */
-#define	TA30		0x4000	/* Transmit Successful From Mailbox 30  */
-#define	TA31		0x8000	/* Transmit Successful From Mailbox 31  */
-
-/* CAN_MBTD Masks												*/
-#define TDPTR		0x001F	/* Mailbox To Temporarily Disable       */
-#define	TDA			0x0040	/* Temporary Disable Acknowledge        */
-#define	TDR			0x0080	/* Temporary Disable Request            */
-
-/* CAN_RFH1 Masks																		*/
-#define	RFH0		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 0         */
-#define	RFH1		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 1         */
-#define	RFH2		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 2         */
-#define	RFH3		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 3         */
-#define	RFH4		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 4         */
-#define	RFH5		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 5         */
-#define	RFH6		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 6         */
-#define	RFH7		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 7         */
-#define	RFH8		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 8         */
-#define	RFH9		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 9         */
-#define	RFH10		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 10        */
-#define	RFH11		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 11        */
-#define	RFH12		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 12        */
-#define	RFH13		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 13        */
-#define	RFH14		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 14        */
-#define	RFH15		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 15        */
-
-/* CAN_RFH2 Masks																		*/
-#define	RFH16		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 16        */
-#define	RFH17		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 17        */
-#define	RFH18		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 18        */
-#define	RFH19		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 19        */
-#define	RFH20		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 20        */
-#define	RFH21		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 21        */
-#define	RFH22		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 22        */
-#define	RFH23		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 23        */
-#define	RFH24		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 24        */
-#define	RFH25		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 25        */
-#define	RFH26		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 26        */
-#define	RFH27		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 27        */
-#define	RFH28		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 28        */
-#define	RFH29		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 29        */
-#define	RFH30		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 30        */
-#define	RFH31		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 31        */
-
-/* CAN_MBTIF1 Masks													*/
-#define	MBTIF0		0x0001	/* TX Interrupt Active In Mailbox 0             */
-#define	MBTIF1		0x0002	/* TX Interrupt Active In Mailbox 1             */
-#define	MBTIF2		0x0004	/* TX Interrupt Active In Mailbox 2             */
-#define	MBTIF3		0x0008	/* TX Interrupt Active In Mailbox 3             */
-#define	MBTIF4		0x0010	/* TX Interrupt Active In Mailbox 4             */
-#define	MBTIF5		0x0020	/* TX Interrupt Active In Mailbox 5             */
-#define	MBTIF6		0x0040	/* TX Interrupt Active In Mailbox 6             */
-#define	MBTIF7		0x0080	/* TX Interrupt Active In Mailbox 7             */
-#define	MBTIF8		0x0100	/* TX Interrupt Active In Mailbox 8             */
-#define	MBTIF9		0x0200	/* TX Interrupt Active In Mailbox 9             */
-#define	MBTIF10		0x0400	/* TX Interrupt Active In Mailbox 10    */
-#define	MBTIF11		0x0800	/* TX Interrupt Active In Mailbox 11    */
-#define	MBTIF12		0x1000	/* TX Interrupt Active In Mailbox 12    */
-#define	MBTIF13		0x2000	/* TX Interrupt Active In Mailbox 13    */
-#define	MBTIF14		0x4000	/* TX Interrupt Active In Mailbox 14    */
-#define	MBTIF15		0x8000	/* TX Interrupt Active In Mailbox 15    */
-
-/* CAN_MBTIF2 Masks													*/
-#define	MBTIF16		0x0001	/* TX Interrupt Active In Mailbox 16    */
-#define	MBTIF17		0x0002	/* TX Interrupt Active In Mailbox 17    */
-#define	MBTIF18		0x0004	/* TX Interrupt Active In Mailbox 18    */
-#define	MBTIF19		0x0008	/* TX Interrupt Active In Mailbox 19    */
-#define	MBTIF20		0x0010	/* TX Interrupt Active In Mailbox 20    */
-#define	MBTIF21		0x0020	/* TX Interrupt Active In Mailbox 21    */
-#define	MBTIF22		0x0040	/* TX Interrupt Active In Mailbox 22    */
-#define	MBTIF23		0x0080	/* TX Interrupt Active In Mailbox 23    */
-#define	MBTIF24		0x0100	/* TX Interrupt Active In Mailbox 24    */
-#define	MBTIF25		0x0200	/* TX Interrupt Active In Mailbox 25    */
-#define	MBTIF26		0x0400	/* TX Interrupt Active In Mailbox 26    */
-#define	MBTIF27		0x0800	/* TX Interrupt Active In Mailbox 27    */
-#define	MBTIF28		0x1000	/* TX Interrupt Active In Mailbox 28    */
-#define	MBTIF29		0x2000	/* TX Interrupt Active In Mailbox 29    */
-#define	MBTIF30		0x4000	/* TX Interrupt Active In Mailbox 30    */
-#define	MBTIF31		0x8000	/* TX Interrupt Active In Mailbox 31    */
-
-/* CAN_MBRIF1 Masks													*/
-#define	MBRIF0		0x0001	/* RX Interrupt Active In Mailbox 0             */
-#define	MBRIF1		0x0002	/* RX Interrupt Active In Mailbox 1             */
-#define	MBRIF2		0x0004	/* RX Interrupt Active In Mailbox 2             */
-#define	MBRIF3		0x0008	/* RX Interrupt Active In Mailbox 3             */
-#define	MBRIF4		0x0010	/* RX Interrupt Active In Mailbox 4             */
-#define	MBRIF5		0x0020	/* RX Interrupt Active In Mailbox 5             */
-#define	MBRIF6		0x0040	/* RX Interrupt Active In Mailbox 6             */
-#define	MBRIF7		0x0080	/* RX Interrupt Active In Mailbox 7             */
-#define	MBRIF8		0x0100	/* RX Interrupt Active In Mailbox 8             */
-#define	MBRIF9		0x0200	/* RX Interrupt Active In Mailbox 9             */
-#define	MBRIF10		0x0400	/* RX Interrupt Active In Mailbox 10    */
-#define	MBRIF11		0x0800	/* RX Interrupt Active In Mailbox 11    */
-#define	MBRIF12		0x1000	/* RX Interrupt Active In Mailbox 12    */
-#define	MBRIF13		0x2000	/* RX Interrupt Active In Mailbox 13    */
-#define	MBRIF14		0x4000	/* RX Interrupt Active In Mailbox 14    */
-#define	MBRIF15		0x8000	/* RX Interrupt Active In Mailbox 15    */
-
-/* CAN_MBRIF2 Masks													*/
-#define	MBRIF16		0x0001	/* RX Interrupt Active In Mailbox 16    */
-#define	MBRIF17		0x0002	/* RX Interrupt Active In Mailbox 17    */
-#define	MBRIF18		0x0004	/* RX Interrupt Active In Mailbox 18    */
-#define	MBRIF19		0x0008	/* RX Interrupt Active In Mailbox 19    */
-#define	MBRIF20		0x0010	/* RX Interrupt Active In Mailbox 20    */
-#define	MBRIF21		0x0020	/* RX Interrupt Active In Mailbox 21    */
-#define	MBRIF22		0x0040	/* RX Interrupt Active In Mailbox 22    */
-#define	MBRIF23		0x0080	/* RX Interrupt Active In Mailbox 23    */
-#define	MBRIF24		0x0100	/* RX Interrupt Active In Mailbox 24    */
-#define	MBRIF25		0x0200	/* RX Interrupt Active In Mailbox 25    */
-#define	MBRIF26		0x0400	/* RX Interrupt Active In Mailbox 26    */
-#define	MBRIF27		0x0800	/* RX Interrupt Active In Mailbox 27    */
-#define	MBRIF28		0x1000	/* RX Interrupt Active In Mailbox 28    */
-#define	MBRIF29		0x2000	/* RX Interrupt Active In Mailbox 29    */
-#define	MBRIF30		0x4000	/* RX Interrupt Active In Mailbox 30    */
-#define	MBRIF31		0x8000	/* RX Interrupt Active In Mailbox 31    */
-
-/* CAN_MBIM1 Masks												*/
-#define	MBIM0		0x0001	/* Enable Interrupt For Mailbox 0       */
-#define	MBIM1		0x0002	/* Enable Interrupt For Mailbox 1       */
-#define	MBIM2		0x0004	/* Enable Interrupt For Mailbox 2       */
-#define	MBIM3		0x0008	/* Enable Interrupt For Mailbox 3       */
-#define	MBIM4		0x0010	/* Enable Interrupt For Mailbox 4       */
-#define	MBIM5		0x0020	/* Enable Interrupt For Mailbox 5       */
-#define	MBIM6		0x0040	/* Enable Interrupt For Mailbox 6       */
-#define	MBIM7		0x0080	/* Enable Interrupt For Mailbox 7       */
-#define	MBIM8		0x0100	/* Enable Interrupt For Mailbox 8       */
-#define	MBIM9		0x0200	/* Enable Interrupt For Mailbox 9       */
-#define	MBIM10		0x0400	/* Enable Interrupt For Mailbox 10      */
-#define	MBIM11		0x0800	/* Enable Interrupt For Mailbox 11      */
-#define	MBIM12		0x1000	/* Enable Interrupt For Mailbox 12      */
-#define	MBIM13		0x2000	/* Enable Interrupt For Mailbox 13      */
-#define	MBIM14		0x4000	/* Enable Interrupt For Mailbox 14      */
-#define	MBIM15		0x8000	/* Enable Interrupt For Mailbox 15      */
-
-/* CAN_MBIM2 Masks												*/
-#define	MBIM16		0x0001	/* Enable Interrupt For Mailbox 16      */
-#define	MBIM17		0x0002	/* Enable Interrupt For Mailbox 17      */
-#define	MBIM18		0x0004	/* Enable Interrupt For Mailbox 18      */
-#define	MBIM19		0x0008	/* Enable Interrupt For Mailbox 19      */
-#define	MBIM20		0x0010	/* Enable Interrupt For Mailbox 20      */
-#define	MBIM21		0x0020	/* Enable Interrupt For Mailbox 21      */
-#define	MBIM22		0x0040	/* Enable Interrupt For Mailbox 22      */
-#define	MBIM23		0x0080	/* Enable Interrupt For Mailbox 23      */
-#define	MBIM24		0x0100	/* Enable Interrupt For Mailbox 24      */
-#define	MBIM25		0x0200	/* Enable Interrupt For Mailbox 25      */
-#define	MBIM26		0x0400	/* Enable Interrupt For Mailbox 26      */
-#define	MBIM27		0x0800	/* Enable Interrupt For Mailbox 27      */
-#define	MBIM28		0x1000	/* Enable Interrupt For Mailbox 28      */
-#define	MBIM29		0x2000	/* Enable Interrupt For Mailbox 29      */
-#define	MBIM30		0x4000	/* Enable Interrupt For Mailbox 30      */
-#define	MBIM31		0x8000	/* Enable Interrupt For Mailbox 31      */
-
-/* CAN_GIM Masks																*/
-#define	EWTIM		0x0001	/* Enable TX Error Count Interrupt                                      */
-#define	EWRIM		0x0002	/* Enable RX Error Count Interrupt                                      */
-#define	EPIM		0x0004	/* Enable Error-Passive Mode Interrupt                          */
-#define	BOIM		0x0008	/* Enable Bus Off Interrupt                                                     */
-#define	WUIM		0x0010	/* Enable Wake-Up Interrupt                                                     */
-#define	UIAIM		0x0020	/* Enable Access To Unimplemented Address Interrupt     */
-#define	AAIM		0x0040	/* Enable Abort Acknowledge Interrupt                           */
-#define	RMLIM		0x0080	/* Enable RX Message Lost Interrupt                                     */
-#define	UCEIM		0x0100	/* Enable Universal Counter Overflow Interrupt          */
-#define	EXTIM		0x0200	/* Enable External Trigger Output Interrupt                     */
-#define	ADIM		0x0400	/* Enable Access Denied Interrupt                                       */
-
-/* CAN_GIS Masks															*/
-#define	EWTIS		0x0001	/* TX Error Count IRQ Status                                    */
-#define	EWRIS		0x0002	/* RX Error Count IRQ Status                                    */
-#define	EPIS		0x0004	/* Error-Passive Mode IRQ Status                                */
-#define	BOIS		0x0008	/* Bus Off IRQ Status                                                   */
-#define	WUIS		0x0010	/* Wake-Up IRQ Status                                                   */
-#define	UIAIS		0x0020	/* Access To Unimplemented Address IRQ Status   */
-#define	AAIS		0x0040	/* Abort Acknowledge IRQ Status                                 */
-#define	RMLIS		0x0080	/* RX Message Lost IRQ Status                                   */
-#define	UCEIS		0x0100	/* Universal Counter Overflow IRQ Status                */
-#define	EXTIS		0x0200	/* External Trigger Output IRQ Status                   */
-#define	ADIS		0x0400	/* Access Denied IRQ Status                                             */
-
-/* CAN_GIF Masks															*/
-#define	EWTIF		0x0001	/* TX Error Count IRQ Flag                                              */
-#define	EWRIF		0x0002	/* RX Error Count IRQ Flag                                              */
-#define	EPIF		0x0004	/* Error-Passive Mode IRQ Flag                                  */
-#define	BOIF		0x0008	/* Bus Off IRQ Flag                                                             */
-#define	WUIF		0x0010	/* Wake-Up IRQ Flag                                                             */
-#define	UIAIF		0x0020	/* Access To Unimplemented Address IRQ Flag             */
-#define	AAIF		0x0040	/* Abort Acknowledge IRQ Flag                                   */
-#define	RMLIF		0x0080	/* RX Message Lost IRQ Flag                                             */
-#define	UCEIF		0x0100	/* Universal Counter Overflow IRQ Flag                  */
-#define	EXTIF		0x0200	/* External Trigger Output IRQ Flag                             */
-#define	ADIF		0x0400	/* Access Denied IRQ Flag                                               */
-
-/* CAN_UCCNF Masks															*/
-#define	UCCNF		0x000F	/* Universal Counter Mode                                               */
-#define UC_STAMP	0x0001	/*              Timestamp Mode                                                  */
-#define UC_WDOG		0x0002	/*              Watchdog Mode                                                   */
-#define UC_AUTOTX	0x0003	/*              Auto-Transmit Mode                                              */
-#define UC_ERROR	0x0006	/*              CAN Error Frame Count                                   */
-#define UC_OVER		0x0007	/*              CAN Overload Frame Count                                */
-#define UC_LOST		0x0008	/*              Arbitration Lost During TX Count                */
-#define UC_AA		0x0009	/*              TX Abort Count                                                  */
-#define UC_TA		0x000A	/*              TX Successful Count                                             */
-#define UC_REJECT	0x000B	/*              RX Message Rejected Count                               */
-#define UC_RML		0x000C	/*              RX Message Lost Count                                   */
-#define UC_RX		0x000D	/*              Total Successful RX Messages Count              */
-#define UC_RMP		0x000E	/*              Successful RX W/Matching ID Count               */
-#define UC_ALL		0x000F	/*              Correct Message On CAN Bus Line Count   */
-#define	UCRC		0x0020	/* Universal Counter Reload/Clear                               */
-#define	UCCT		0x0040	/* Universal Counter CAN Trigger                                */
-#define	UCE			0x0080	/* Universal Counter Enable                                             */
-
-/* CAN_ESR Masks										*/
-#define	ACKE		0x0004	/* Acknowledge Error            */
-#define	SER			0x0008	/* Stuff Error                          */
-#define	CRCE		0x0010	/* CRC Error                            */
-#define	SA0			0x0020	/* Stuck At Dominant Error      */
-#define	BEF			0x0040	/* Bit Error Flag                       */
-#define	FER			0x0080	/* Form Error Flag                      */
-
-/* CAN_EWR Masks												*/
-#define	EWLREC		0x00FF	/* RX Error Count Limit (For EWRIS)     */
-#define	EWLTEC		0xFF00	/* TX Error Count Limit (For EWTIS)     */
-
 /*  *******************  PIN CONTROL REGISTER MASKS  ************************/
 /* PORT_MUX Masks															*/
 #define	PJSE			0x0001	/* Port J SPI/SPORT Enable                      */
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-bf537/include/mach/irq.h linux-libre-2.6.35-gnu/arch/blackfin/mach-bf537/include/mach/irq.h
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-bf537/include/mach/irq.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-bf537/include/mach/irq.h	2010-08-01 18:11:14.000000000 -0400
@@ -74,7 +74,7 @@
 
 #define IRQ_PPI_ERROR       42	/*PPI Error Interrupt */
 #define IRQ_CAN_ERROR       43	/*CAN Error Interrupt */
-#define IRQ_MAC_ERROR       44	/*PPI Error Interrupt */
+#define IRQ_MAC_ERROR       44	/*MAC Status/Error Interrupt */
 #define IRQ_SPORT0_ERROR    45	/*SPORT0 Error Interrupt */
 #define IRQ_SPORT1_ERROR    46	/*SPORT1 Error Interrupt */
 #define IRQ_SPI_ERROR       47	/*SPI Error Interrupt */
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-bf538/include/mach/defBF539.h linux-libre-2.6.35-gnu/arch/blackfin/mach-bf538/include/mach/defBF539.h
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-bf538/include/mach/defBF539.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-bf538/include/mach/defBF539.h	2010-08-01 18:11:14.000000000 -0400
@@ -2418,625 +2418,4 @@
 #define	RCV_HALF	0x0004		/*		Receive	FIFO Has 1 Byte	To Read */
 #define	RCV_FULL	0x000C		/*		Receive	FIFO Full (2 Bytes To Read) */
 
-
-/* ************	 CONTROLLER AREA NETWORK (CAN) MASKS  ***************/
-/* CAN_CONTROL Masks					 */
-#define	SRS			0x0001	/* Software Reset */
-#define	DNM			0x0002	/* Device Net Mode */
-#define	ABO			0x0004	/* Auto-Bus On Enable */
-#define	WBA			0x0010	/* Wake-Up On CAN Bus Activity Enable */
-#define	SMR			0x0020	/* Sleep Mode Request */
-#define	CSR			0x0040	/* CAN Suspend Mode Request */
-#define	CCR			0x0080	/* CAN Configuration Mode Request */
-
-/* CAN_STATUS Masks					 */
-#define	WT			0x0001	/* TX Warning Flag */
-#define	WR			0x0002	/* RX Warning Flag */
-#define	EP			0x0004	/* Error Passive Mode */
-#define	EBO			0x0008	/* Error Bus Off Mode */
-#define	CSA			0x0040	/* Suspend Mode	Acknowledge */
-#define	CCA			0x0080	/* Configuration Mode Acknowledge */
-#define	MBPTR		0x1F00	/* Mailbox Pointer */
-#define	TRM			0x4000	/* Transmit Mode */
-#define	REC			0x8000	/* Receive Mode */
-
-/* CAN_CLOCK Masks		 */
-#define	BRP			0x03FF	/* Bit-Rate Pre-Scaler */
-
-/* CAN_TIMING Masks				 */
-#define	TSEG1		0x000F	/* Time	Segment	1 */
-#define	TSEG2		0x0070	/* Time	Segment	2 */
-#define	SAM			0x0080	/* Sampling */
-#define	SJW			0x0300	/* Synchronization Jump	Width */
-
-/* CAN_DEBUG Masks				 */
-#define	DEC			0x0001	/* Disable CAN Error Counters */
-#define	DRI			0x0002	/* Disable CAN RX Input */
-#define	DTO			0x0004	/* Disable CAN TX Output */
-#define	DIL			0x0008	/* Disable CAN Internal	Loop */
-#define	MAA			0x0010	/* Mode	Auto-Acknowledge Enable */
-#define	MRB			0x0020	/* Mode	Read Back Enable */
-#define	CDE			0x8000	/* CAN Debug Enable */
-
-/* CAN_CEC Masks			 */
-#define	RXECNT		0x00FF	/* Receive Error Counter */
-#define	TXECNT		0xFF00	/* Transmit Error Counter */
-
-/* CAN_INTR Masks				 */
-#define	MBRIRQ	0x0001	/* Mailbox Receive Interrupt */
-#define	MBRIF		MBRIRQ	/* legacy */
-#define	MBTIRQ	0x0002	/* Mailbox Transmit Interrupt */
-#define	MBTIF		MBTIRQ	/* legacy */
-#define	GIRQ		0x0004	/* Global Interrupt */
-#define	SMACK		0x0008	/* Sleep Mode Acknowledge */
-#define	CANTX		0x0040	/* CAN TX Bus Value */
-#define	CANRX		0x0080	/* CAN RX Bus Value */
-
-/* CAN_MBxx_ID1	and CAN_MBxx_ID0 Masks			 */
-#define	DFC			0xFFFF	/* Data	Filtering Code (If Enabled) (ID0) */
-#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier	(ID0) */
-#define	EXTID_HI	0x0003	/* Upper 2 Bits	of Extended Identifier (ID1) */
-#define	BASEID		0x1FFC	/* Base	Identifier	 */
-#define	IDE			0x2000	/* Identifier Extension */
-#define	RTR			0x4000	/* Remote Frame	Transmission Request */
-#define	AME			0x8000	/* Acceptance Mask Enable */
-
-/* CAN_MBxx_TIMESTAMP Masks */
-#define	TSV			0xFFFF	/* Timestamp */
-
-/* CAN_MBxx_LENGTH Masks */
-#define	DLC			0x000F	/* Data	Length Code */
-
-/* CAN_AMxxH and CAN_AMxxL Masks					 */
-#define	DFM			0xFFFF	/* Data	Field Mask (If Enabled)	(CAN_AMxxL) */
-#define	EXTID_LO	0xFFFF	/* Lower 16 Bits of Extended Identifier	(CAN_AMxxL) */
-#define	EXTID_HI	0x0003	/* Upper 2 Bits	of Extended Identifier (CAN_AMxxH) */
-#define	BASEID		0x1FFC	/* Base	Identifier		 */
-#define	AMIDE		0x2000	/* Acceptance Mask ID Extension	Enable */
-#define	FMD			0x4000	/* Full	Mask Data Field	Enable */
-#define	FDF			0x8000	/* Filter On Data Field	Enable */
-
-/* CAN_MC1 Masks		 */
-#define	MC0			0x0001	/* Enable Mailbox 0 */
-#define	MC1			0x0002	/* Enable Mailbox 1 */
-#define	MC2			0x0004	/* Enable Mailbox 2 */
-#define	MC3			0x0008	/* Enable Mailbox 3 */
-#define	MC4			0x0010	/* Enable Mailbox 4 */
-#define	MC5			0x0020	/* Enable Mailbox 5 */
-#define	MC6			0x0040	/* Enable Mailbox 6 */
-#define	MC7			0x0080	/* Enable Mailbox 7 */
-#define	MC8			0x0100	/* Enable Mailbox 8 */
-#define	MC9			0x0200	/* Enable Mailbox 9 */
-#define	MC10		0x0400	/* Enable Mailbox 10 */
-#define	MC11		0x0800	/* Enable Mailbox 11 */
-#define	MC12		0x1000	/* Enable Mailbox 12 */
-#define	MC13		0x2000	/* Enable Mailbox 13 */
-#define	MC14		0x4000	/* Enable Mailbox 14 */
-#define	MC15		0x8000	/* Enable Mailbox 15 */
-
-/* CAN_MC2 Masks		 */
-#define	MC16		0x0001	/* Enable Mailbox 16 */
-#define	MC17		0x0002	/* Enable Mailbox 17 */
-#define	MC18		0x0004	/* Enable Mailbox 18 */
-#define	MC19		0x0008	/* Enable Mailbox 19 */
-#define	MC20		0x0010	/* Enable Mailbox 20 */
-#define	MC21		0x0020	/* Enable Mailbox 21 */
-#define	MC22		0x0040	/* Enable Mailbox 22 */
-#define	MC23		0x0080	/* Enable Mailbox 23 */
-#define	MC24		0x0100	/* Enable Mailbox 24 */
-#define	MC25		0x0200	/* Enable Mailbox 25 */
-#define	MC26		0x0400	/* Enable Mailbox 26 */
-#define	MC27		0x0800	/* Enable Mailbox 27 */
-#define	MC28		0x1000	/* Enable Mailbox 28 */
-#define	MC29		0x2000	/* Enable Mailbox 29 */
-#define	MC30		0x4000	/* Enable Mailbox 30 */
-#define	MC31		0x8000	/* Enable Mailbox 31 */
-
-/* CAN_MD1 Masks					 */
-#define	MD0			0x0001	/* Enable Mailbox 0 For	Receive */
-#define	MD1			0x0002	/* Enable Mailbox 1 For	Receive */
-#define	MD2			0x0004	/* Enable Mailbox 2 For	Receive */
-#define	MD3			0x0008	/* Enable Mailbox 3 For	Receive */
-#define	MD4			0x0010	/* Enable Mailbox 4 For	Receive */
-#define	MD5			0x0020	/* Enable Mailbox 5 For	Receive */
-#define	MD6			0x0040	/* Enable Mailbox 6 For	Receive */
-#define	MD7			0x0080	/* Enable Mailbox 7 For	Receive */
-#define	MD8			0x0100	/* Enable Mailbox 8 For	Receive */
-#define	MD9			0x0200	/* Enable Mailbox 9 For	Receive */
-#define	MD10		0x0400	/* Enable Mailbox 10 For Receive */
-#define	MD11		0x0800	/* Enable Mailbox 11 For Receive */
-#define	MD12		0x1000	/* Enable Mailbox 12 For Receive */
-#define	MD13		0x2000	/* Enable Mailbox 13 For Receive */
-#define	MD14		0x4000	/* Enable Mailbox 14 For Receive */
-#define	MD15		0x8000	/* Enable Mailbox 15 For Receive */
-
-/* CAN_MD2 Masks					 */
-#define	MD16		0x0001	/* Enable Mailbox 16 For Receive */
-#define	MD17		0x0002	/* Enable Mailbox 17 For Receive */
-#define	MD18		0x0004	/* Enable Mailbox 18 For Receive */
-#define	MD19		0x0008	/* Enable Mailbox 19 For Receive */
-#define	MD20		0x0010	/* Enable Mailbox 20 For Receive */
-#define	MD21		0x0020	/* Enable Mailbox 21 For Receive */
-#define	MD22		0x0040	/* Enable Mailbox 22 For Receive */
-#define	MD23		0x0080	/* Enable Mailbox 23 For Receive */
-#define	MD24		0x0100	/* Enable Mailbox 24 For Receive */
-#define	MD25		0x0200	/* Enable Mailbox 25 For Receive */
-#define	MD26		0x0400	/* Enable Mailbox 26 For Receive */
-#define	MD27		0x0800	/* Enable Mailbox 27 For Receive */
-#define	MD28		0x1000	/* Enable Mailbox 28 For Receive */
-#define	MD29		0x2000	/* Enable Mailbox 29 For Receive */
-#define	MD30		0x4000	/* Enable Mailbox 30 For Receive */
-#define	MD31		0x8000	/* Enable Mailbox 31 For Receive */
-
-/* CAN_RMP1 Masks					 */
-#define	RMP0		0x0001	/* RX Message Pending In Mailbox 0 */
-#define	RMP1		0x0002	/* RX Message Pending In Mailbox 1 */
-#define	RMP2		0x0004	/* RX Message Pending In Mailbox 2 */
-#define	RMP3		0x0008	/* RX Message Pending In Mailbox 3 */
-#define	RMP4		0x0010	/* RX Message Pending In Mailbox 4 */
-#define	RMP5		0x0020	/* RX Message Pending In Mailbox 5 */
-#define	RMP6		0x0040	/* RX Message Pending In Mailbox 6 */
-#define	RMP7		0x0080	/* RX Message Pending In Mailbox 7 */
-#define	RMP8		0x0100	/* RX Message Pending In Mailbox 8 */
-#define	RMP9		0x0200	/* RX Message Pending In Mailbox 9 */
-#define	RMP10		0x0400	/* RX Message Pending In Mailbox 10 */
-#define	RMP11		0x0800	/* RX Message Pending In Mailbox 11 */
-#define	RMP12		0x1000	/* RX Message Pending In Mailbox 12 */
-#define	RMP13		0x2000	/* RX Message Pending In Mailbox 13 */
-#define	RMP14		0x4000	/* RX Message Pending In Mailbox 14 */
-#define	RMP15		0x8000	/* RX Message Pending In Mailbox 15 */
-
-/* CAN_RMP2 Masks					 */
-#define	RMP16		0x0001	/* RX Message Pending In Mailbox 16 */
-#define	RMP17		0x0002	/* RX Message Pending In Mailbox 17 */
-#define	RMP18		0x0004	/* RX Message Pending In Mailbox 18 */
-#define	RMP19		0x0008	/* RX Message Pending In Mailbox 19 */
-#define	RMP20		0x0010	/* RX Message Pending In Mailbox 20 */
-#define	RMP21		0x0020	/* RX Message Pending In Mailbox 21 */
-#define	RMP22		0x0040	/* RX Message Pending In Mailbox 22 */
-#define	RMP23		0x0080	/* RX Message Pending In Mailbox 23 */
-#define	RMP24		0x0100	/* RX Message Pending In Mailbox 24 */
-#define	RMP25		0x0200	/* RX Message Pending In Mailbox 25 */
-#define	RMP26		0x0400	/* RX Message Pending In Mailbox 26 */
-#define	RMP27		0x0800	/* RX Message Pending In Mailbox 27 */
-#define	RMP28		0x1000	/* RX Message Pending In Mailbox 28 */
-#define	RMP29		0x2000	/* RX Message Pending In Mailbox 29 */
-#define	RMP30		0x4000	/* RX Message Pending In Mailbox 30 */
-#define	RMP31		0x8000	/* RX Message Pending In Mailbox 31 */
-
-/* CAN_RML1 Masks					 */
-#define	RML0		0x0001	/* RX Message Lost In Mailbox 0 */
-#define	RML1		0x0002	/* RX Message Lost In Mailbox 1 */
-#define	RML2		0x0004	/* RX Message Lost In Mailbox 2 */
-#define	RML3		0x0008	/* RX Message Lost In Mailbox 3 */
-#define	RML4		0x0010	/* RX Message Lost In Mailbox 4 */
-#define	RML5		0x0020	/* RX Message Lost In Mailbox 5 */
-#define	RML6		0x0040	/* RX Message Lost In Mailbox 6 */
-#define	RML7		0x0080	/* RX Message Lost In Mailbox 7 */
-#define	RML8		0x0100	/* RX Message Lost In Mailbox 8 */
-#define	RML9		0x0200	/* RX Message Lost In Mailbox 9 */
-#define	RML10		0x0400	/* RX Message Lost In Mailbox 10 */
-#define	RML11		0x0800	/* RX Message Lost In Mailbox 11 */
-#define	RML12		0x1000	/* RX Message Lost In Mailbox 12 */
-#define	RML13		0x2000	/* RX Message Lost In Mailbox 13 */
-#define	RML14		0x4000	/* RX Message Lost In Mailbox 14 */
-#define	RML15		0x8000	/* RX Message Lost In Mailbox 15 */
-
-/* CAN_RML2 Masks					 */
-#define	RML16		0x0001	/* RX Message Lost In Mailbox 16 */
-#define	RML17		0x0002	/* RX Message Lost In Mailbox 17 */
-#define	RML18		0x0004	/* RX Message Lost In Mailbox 18 */
-#define	RML19		0x0008	/* RX Message Lost In Mailbox 19 */
-#define	RML20		0x0010	/* RX Message Lost In Mailbox 20 */
-#define	RML21		0x0020	/* RX Message Lost In Mailbox 21 */
-#define	RML22		0x0040	/* RX Message Lost In Mailbox 22 */
-#define	RML23		0x0080	/* RX Message Lost In Mailbox 23 */
-#define	RML24		0x0100	/* RX Message Lost In Mailbox 24 */
-#define	RML25		0x0200	/* RX Message Lost In Mailbox 25 */
-#define	RML26		0x0400	/* RX Message Lost In Mailbox 26 */
-#define	RML27		0x0800	/* RX Message Lost In Mailbox 27 */
-#define	RML28		0x1000	/* RX Message Lost In Mailbox 28 */
-#define	RML29		0x2000	/* RX Message Lost In Mailbox 29 */
-#define	RML30		0x4000	/* RX Message Lost In Mailbox 30 */
-#define	RML31		0x8000	/* RX Message Lost In Mailbox 31 */
-
-/* CAN_OPSS1 Masks													 */
-#define	OPSS0		0x0001	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	0 */
-#define	OPSS1		0x0002	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	1 */
-#define	OPSS2		0x0004	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	2 */
-#define	OPSS3		0x0008	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	3 */
-#define	OPSS4		0x0010	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	4 */
-#define	OPSS5		0x0020	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	5 */
-#define	OPSS6		0x0040	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	6 */
-#define	OPSS7		0x0080	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	7 */
-#define	OPSS8		0x0100	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	8 */
-#define	OPSS9		0x0200	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	9 */
-#define	OPSS10		0x0400	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	10 */
-#define	OPSS11		0x0800	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	11 */
-#define	OPSS12		0x1000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	12 */
-#define	OPSS13		0x2000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	13 */
-#define	OPSS14		0x4000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	14 */
-#define	OPSS15		0x8000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	15 */
-
-/* CAN_OPSS2 Masks													 */
-#define	OPSS16		0x0001	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	16 */
-#define	OPSS17		0x0002	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	17 */
-#define	OPSS18		0x0004	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	18 */
-#define	OPSS19		0x0008	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	19 */
-#define	OPSS20		0x0010	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	20 */
-#define	OPSS21		0x0020	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	21 */
-#define	OPSS22		0x0040	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	22 */
-#define	OPSS23		0x0080	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	23 */
-#define	OPSS24		0x0100	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	24 */
-#define	OPSS25		0x0200	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	25 */
-#define	OPSS26		0x0400	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	26 */
-#define	OPSS27		0x0800	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	27 */
-#define	OPSS28		0x1000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	28 */
-#define	OPSS29		0x2000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	29 */
-#define	OPSS30		0x4000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	30 */
-#define	OPSS31		0x8000	/* Enable RX Overwrite Protection or TX	Single-Shot For	Mailbox	31 */
-
-/* CAN_TRR1 Masks							 */
-#define	TRR0		0x0001	/* Deny	But Don't Lock Access To Mailbox 0 */
-#define	TRR1		0x0002	/* Deny	But Don't Lock Access To Mailbox 1 */
-#define	TRR2		0x0004	/* Deny	But Don't Lock Access To Mailbox 2 */
-#define	TRR3		0x0008	/* Deny	But Don't Lock Access To Mailbox 3 */
-#define	TRR4		0x0010	/* Deny	But Don't Lock Access To Mailbox 4 */
-#define	TRR5		0x0020	/* Deny	But Don't Lock Access To Mailbox 5 */
-#define	TRR6		0x0040	/* Deny	But Don't Lock Access To Mailbox 6 */
-#define	TRR7		0x0080	/* Deny	But Don't Lock Access To Mailbox 7 */
-#define	TRR8		0x0100	/* Deny	But Don't Lock Access To Mailbox 8 */
-#define	TRR9		0x0200	/* Deny	But Don't Lock Access To Mailbox 9 */
-#define	TRR10		0x0400	/* Deny	But Don't Lock Access To Mailbox 10 */
-#define	TRR11		0x0800	/* Deny	But Don't Lock Access To Mailbox 11 */
-#define	TRR12		0x1000	/* Deny	But Don't Lock Access To Mailbox 12 */
-#define	TRR13		0x2000	/* Deny	But Don't Lock Access To Mailbox 13 */
-#define	TRR14		0x4000	/* Deny	But Don't Lock Access To Mailbox 14 */
-#define	TRR15		0x8000	/* Deny	But Don't Lock Access To Mailbox 15 */
-
-/* CAN_TRR2 Masks							 */
-#define	TRR16		0x0001	/* Deny	But Don't Lock Access To Mailbox 16 */
-#define	TRR17		0x0002	/* Deny	But Don't Lock Access To Mailbox 17 */
-#define	TRR18		0x0004	/* Deny	But Don't Lock Access To Mailbox 18 */
-#define	TRR19		0x0008	/* Deny	But Don't Lock Access To Mailbox 19 */
-#define	TRR20		0x0010	/* Deny	But Don't Lock Access To Mailbox 20 */
-#define	TRR21		0x0020	/* Deny	But Don't Lock Access To Mailbox 21 */
-#define	TRR22		0x0040	/* Deny	But Don't Lock Access To Mailbox 22 */
-#define	TRR23		0x0080	/* Deny	But Don't Lock Access To Mailbox 23 */
-#define	TRR24		0x0100	/* Deny	But Don't Lock Access To Mailbox 24 */
-#define	TRR25		0x0200	/* Deny	But Don't Lock Access To Mailbox 25 */
-#define	TRR26		0x0400	/* Deny	But Don't Lock Access To Mailbox 26 */
-#define	TRR27		0x0800	/* Deny	But Don't Lock Access To Mailbox 27 */
-#define	TRR28		0x1000	/* Deny	But Don't Lock Access To Mailbox 28 */
-#define	TRR29		0x2000	/* Deny	But Don't Lock Access To Mailbox 29 */
-#define	TRR30		0x4000	/* Deny	But Don't Lock Access To Mailbox 30 */
-#define	TRR31		0x8000	/* Deny	But Don't Lock Access To Mailbox 31 */
-
-/* CAN_TRS1 Masks						 */
-#define	TRS0		0x0001	/* Remote Frame	Request	For Mailbox 0 */
-#define	TRS1		0x0002	/* Remote Frame	Request	For Mailbox 1 */
-#define	TRS2		0x0004	/* Remote Frame	Request	For Mailbox 2 */
-#define	TRS3		0x0008	/* Remote Frame	Request	For Mailbox 3 */
-#define	TRS4		0x0010	/* Remote Frame	Request	For Mailbox 4 */
-#define	TRS5		0x0020	/* Remote Frame	Request	For Mailbox 5 */
-#define	TRS6		0x0040	/* Remote Frame	Request	For Mailbox 6 */
-#define	TRS7		0x0080	/* Remote Frame	Request	For Mailbox 7 */
-#define	TRS8		0x0100	/* Remote Frame	Request	For Mailbox 8 */
-#define	TRS9		0x0200	/* Remote Frame	Request	For Mailbox 9 */
-#define	TRS10		0x0400	/* Remote Frame	Request	For Mailbox 10 */
-#define	TRS11		0x0800	/* Remote Frame	Request	For Mailbox 11 */
-#define	TRS12		0x1000	/* Remote Frame	Request	For Mailbox 12 */
-#define	TRS13		0x2000	/* Remote Frame	Request	For Mailbox 13 */
-#define	TRS14		0x4000	/* Remote Frame	Request	For Mailbox 14 */
-#define	TRS15		0x8000	/* Remote Frame	Request	For Mailbox 15 */
-
-/* CAN_TRS2 Masks						 */
-#define	TRS16		0x0001	/* Remote Frame	Request	For Mailbox 16 */
-#define	TRS17		0x0002	/* Remote Frame	Request	For Mailbox 17 */
-#define	TRS18		0x0004	/* Remote Frame	Request	For Mailbox 18 */
-#define	TRS19		0x0008	/* Remote Frame	Request	For Mailbox 19 */
-#define	TRS20		0x0010	/* Remote Frame	Request	For Mailbox 20 */
-#define	TRS21		0x0020	/* Remote Frame	Request	For Mailbox 21 */
-#define	TRS22		0x0040	/* Remote Frame	Request	For Mailbox 22 */
-#define	TRS23		0x0080	/* Remote Frame	Request	For Mailbox 23 */
-#define	TRS24		0x0100	/* Remote Frame	Request	For Mailbox 24 */
-#define	TRS25		0x0200	/* Remote Frame	Request	For Mailbox 25 */
-#define	TRS26		0x0400	/* Remote Frame	Request	For Mailbox 26 */
-#define	TRS27		0x0800	/* Remote Frame	Request	For Mailbox 27 */
-#define	TRS28		0x1000	/* Remote Frame	Request	For Mailbox 28 */
-#define	TRS29		0x2000	/* Remote Frame	Request	For Mailbox 29 */
-#define	TRS30		0x4000	/* Remote Frame	Request	For Mailbox 30 */
-#define	TRS31		0x8000	/* Remote Frame	Request	For Mailbox 31 */
-
-/* CAN_AA1 Masks					 */
-#define	AA0			0x0001	/* Aborted Message In Mailbox 0 */
-#define	AA1			0x0002	/* Aborted Message In Mailbox 1 */
-#define	AA2			0x0004	/* Aborted Message In Mailbox 2 */
-#define	AA3			0x0008	/* Aborted Message In Mailbox 3 */
-#define	AA4			0x0010	/* Aborted Message In Mailbox 4 */
-#define	AA5			0x0020	/* Aborted Message In Mailbox 5 */
-#define	AA6			0x0040	/* Aborted Message In Mailbox 6 */
-#define	AA7			0x0080	/* Aborted Message In Mailbox 7 */
-#define	AA8			0x0100	/* Aborted Message In Mailbox 8 */
-#define	AA9			0x0200	/* Aborted Message In Mailbox 9 */
-#define	AA10		0x0400	/* Aborted Message In Mailbox 10 */
-#define	AA11		0x0800	/* Aborted Message In Mailbox 11 */
-#define	AA12		0x1000	/* Aborted Message In Mailbox 12 */
-#define	AA13		0x2000	/* Aborted Message In Mailbox 13 */
-#define	AA14		0x4000	/* Aborted Message In Mailbox 14 */
-#define	AA15		0x8000	/* Aborted Message In Mailbox 15 */
-
-/* CAN_AA2 Masks					 */
-#define	AA16		0x0001	/* Aborted Message In Mailbox 16 */
-#define	AA17		0x0002	/* Aborted Message In Mailbox 17 */
-#define	AA18		0x0004	/* Aborted Message In Mailbox 18 */
-#define	AA19		0x0008	/* Aborted Message In Mailbox 19 */
-#define	AA20		0x0010	/* Aborted Message In Mailbox 20 */
-#define	AA21		0x0020	/* Aborted Message In Mailbox 21 */
-#define	AA22		0x0040	/* Aborted Message In Mailbox 22 */
-#define	AA23		0x0080	/* Aborted Message In Mailbox 23 */
-#define	AA24		0x0100	/* Aborted Message In Mailbox 24 */
-#define	AA25		0x0200	/* Aborted Message In Mailbox 25 */
-#define	AA26		0x0400	/* Aborted Message In Mailbox 26 */
-#define	AA27		0x0800	/* Aborted Message In Mailbox 27 */
-#define	AA28		0x1000	/* Aborted Message In Mailbox 28 */
-#define	AA29		0x2000	/* Aborted Message In Mailbox 29 */
-#define	AA30		0x4000	/* Aborted Message In Mailbox 30 */
-#define	AA31		0x8000	/* Aborted Message In Mailbox 31 */
-
-/* CAN_TA1 Masks						 */
-#define	TA0			0x0001	/* Transmit Successful From Mailbox 0 */
-#define	TA1			0x0002	/* Transmit Successful From Mailbox 1 */
-#define	TA2			0x0004	/* Transmit Successful From Mailbox 2 */
-#define	TA3			0x0008	/* Transmit Successful From Mailbox 3 */
-#define	TA4			0x0010	/* Transmit Successful From Mailbox 4 */
-#define	TA5			0x0020	/* Transmit Successful From Mailbox 5 */
-#define	TA6			0x0040	/* Transmit Successful From Mailbox 6 */
-#define	TA7			0x0080	/* Transmit Successful From Mailbox 7 */
-#define	TA8			0x0100	/* Transmit Successful From Mailbox 8 */
-#define	TA9			0x0200	/* Transmit Successful From Mailbox 9 */
-#define	TA10		0x0400	/* Transmit Successful From Mailbox 10 */
-#define	TA11		0x0800	/* Transmit Successful From Mailbox 11 */
-#define	TA12		0x1000	/* Transmit Successful From Mailbox 12 */
-#define	TA13		0x2000	/* Transmit Successful From Mailbox 13 */
-#define	TA14		0x4000	/* Transmit Successful From Mailbox 14 */
-#define	TA15		0x8000	/* Transmit Successful From Mailbox 15 */
-
-/* CAN_TA2 Masks						 */
-#define	TA16		0x0001	/* Transmit Successful From Mailbox 16 */
-#define	TA17		0x0002	/* Transmit Successful From Mailbox 17 */
-#define	TA18		0x0004	/* Transmit Successful From Mailbox 18 */
-#define	TA19		0x0008	/* Transmit Successful From Mailbox 19 */
-#define	TA20		0x0010	/* Transmit Successful From Mailbox 20 */
-#define	TA21		0x0020	/* Transmit Successful From Mailbox 21 */
-#define	TA22		0x0040	/* Transmit Successful From Mailbox 22 */
-#define	TA23		0x0080	/* Transmit Successful From Mailbox 23 */
-#define	TA24		0x0100	/* Transmit Successful From Mailbox 24 */
-#define	TA25		0x0200	/* Transmit Successful From Mailbox 25 */
-#define	TA26		0x0400	/* Transmit Successful From Mailbox 26 */
-#define	TA27		0x0800	/* Transmit Successful From Mailbox 27 */
-#define	TA28		0x1000	/* Transmit Successful From Mailbox 28 */
-#define	TA29		0x2000	/* Transmit Successful From Mailbox 29 */
-#define	TA30		0x4000	/* Transmit Successful From Mailbox 30 */
-#define	TA31		0x8000	/* Transmit Successful From Mailbox 31 */
-
-/* CAN_MBTD Masks					 */
-#define	TDPTR		0x001F	/* Mailbox To Temporarily Disable */
-#define	TDA			0x0040	/* Temporary Disable Acknowledge */
-#define	TDR			0x0080	/* Temporary Disable Request */
-
-/* CAN_RFH1 Masks											 */
-#define	RFH0		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 0 */
-#define	RFH1		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 1 */
-#define	RFH2		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 2 */
-#define	RFH3		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 3 */
-#define	RFH4		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 4 */
-#define	RFH5		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 5 */
-#define	RFH6		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 6 */
-#define	RFH7		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 7 */
-#define	RFH8		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 8 */
-#define	RFH9		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 9 */
-#define	RFH10		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 10 */
-#define	RFH11		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 11 */
-#define	RFH12		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 12 */
-#define	RFH13		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 13 */
-#define	RFH14		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 14 */
-#define	RFH15		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 15 */
-
-/* CAN_RFH2 Masks											 */
-#define	RFH16		0x0001	/* Enable Automatic Remote Frame Handling For Mailbox 16 */
-#define	RFH17		0x0002	/* Enable Automatic Remote Frame Handling For Mailbox 17 */
-#define	RFH18		0x0004	/* Enable Automatic Remote Frame Handling For Mailbox 18 */
-#define	RFH19		0x0008	/* Enable Automatic Remote Frame Handling For Mailbox 19 */
-#define	RFH20		0x0010	/* Enable Automatic Remote Frame Handling For Mailbox 20 */
-#define	RFH21		0x0020	/* Enable Automatic Remote Frame Handling For Mailbox 21 */
-#define	RFH22		0x0040	/* Enable Automatic Remote Frame Handling For Mailbox 22 */
-#define	RFH23		0x0080	/* Enable Automatic Remote Frame Handling For Mailbox 23 */
-#define	RFH24		0x0100	/* Enable Automatic Remote Frame Handling For Mailbox 24 */
-#define	RFH25		0x0200	/* Enable Automatic Remote Frame Handling For Mailbox 25 */
-#define	RFH26		0x0400	/* Enable Automatic Remote Frame Handling For Mailbox 26 */
-#define	RFH27		0x0800	/* Enable Automatic Remote Frame Handling For Mailbox 27 */
-#define	RFH28		0x1000	/* Enable Automatic Remote Frame Handling For Mailbox 28 */
-#define	RFH29		0x2000	/* Enable Automatic Remote Frame Handling For Mailbox 29 */
-#define	RFH30		0x4000	/* Enable Automatic Remote Frame Handling For Mailbox 30 */
-#define	RFH31		0x8000	/* Enable Automatic Remote Frame Handling For Mailbox 31 */
-
-/* CAN_MBTIF1 Masks						 */
-#define	MBTIF0		0x0001	/* TX Interrupt	Active In Mailbox 0 */
-#define	MBTIF1		0x0002	/* TX Interrupt	Active In Mailbox 1 */
-#define	MBTIF2		0x0004	/* TX Interrupt	Active In Mailbox 2 */
-#define	MBTIF3		0x0008	/* TX Interrupt	Active In Mailbox 3 */
-#define	MBTIF4		0x0010	/* TX Interrupt	Active In Mailbox 4 */
-#define	MBTIF5		0x0020	/* TX Interrupt	Active In Mailbox 5 */
-#define	MBTIF6		0x0040	/* TX Interrupt	Active In Mailbox 6 */
-#define	MBTIF7		0x0080	/* TX Interrupt	Active In Mailbox 7 */
-#define	MBTIF8		0x0100	/* TX Interrupt	Active In Mailbox 8 */
-#define	MBTIF9		0x0200	/* TX Interrupt	Active In Mailbox 9 */
-#define	MBTIF10		0x0400	/* TX Interrupt	Active In Mailbox 10 */
-#define	MBTIF11		0x0800	/* TX Interrupt	Active In Mailbox 11 */
-#define	MBTIF12		0x1000	/* TX Interrupt	Active In Mailbox 12 */
-#define	MBTIF13		0x2000	/* TX Interrupt	Active In Mailbox 13 */
-#define	MBTIF14		0x4000	/* TX Interrupt	Active In Mailbox 14 */
-#define	MBTIF15		0x8000	/* TX Interrupt	Active In Mailbox 15 */
-
-/* CAN_MBTIF2 Masks						 */
-#define	MBTIF16		0x0001	/* TX Interrupt	Active In Mailbox 16 */
-#define	MBTIF17		0x0002	/* TX Interrupt	Active In Mailbox 17 */
-#define	MBTIF18		0x0004	/* TX Interrupt	Active In Mailbox 18 */
-#define	MBTIF19		0x0008	/* TX Interrupt	Active In Mailbox 19 */
-#define	MBTIF20		0x0010	/* TX Interrupt	Active In Mailbox 20 */
-#define	MBTIF21		0x0020	/* TX Interrupt	Active In Mailbox 21 */
-#define	MBTIF22		0x0040	/* TX Interrupt	Active In Mailbox 22 */
-#define	MBTIF23		0x0080	/* TX Interrupt	Active In Mailbox 23 */
-#define	MBTIF24		0x0100	/* TX Interrupt	Active In Mailbox 24 */
-#define	MBTIF25		0x0200	/* TX Interrupt	Active In Mailbox 25 */
-#define	MBTIF26		0x0400	/* TX Interrupt	Active In Mailbox 26 */
-#define	MBTIF27		0x0800	/* TX Interrupt	Active In Mailbox 27 */
-#define	MBTIF28		0x1000	/* TX Interrupt	Active In Mailbox 28 */
-#define	MBTIF29		0x2000	/* TX Interrupt	Active In Mailbox 29 */
-#define	MBTIF30		0x4000	/* TX Interrupt	Active In Mailbox 30 */
-#define	MBTIF31		0x8000	/* TX Interrupt	Active In Mailbox 31 */
-
-/* CAN_MBRIF1 Masks						 */
-#define	MBRIF0		0x0001	/* RX Interrupt	Active In Mailbox 0 */
-#define	MBRIF1		0x0002	/* RX Interrupt	Active In Mailbox 1 */
-#define	MBRIF2		0x0004	/* RX Interrupt	Active In Mailbox 2 */
-#define	MBRIF3		0x0008	/* RX Interrupt	Active In Mailbox 3 */
-#define	MBRIF4		0x0010	/* RX Interrupt	Active In Mailbox 4 */
-#define	MBRIF5		0x0020	/* RX Interrupt	Active In Mailbox 5 */
-#define	MBRIF6		0x0040	/* RX Interrupt	Active In Mailbox 6 */
-#define	MBRIF7		0x0080	/* RX Interrupt	Active In Mailbox 7 */
-#define	MBRIF8		0x0100	/* RX Interrupt	Active In Mailbox 8 */
-#define	MBRIF9		0x0200	/* RX Interrupt	Active In Mailbox 9 */
-#define	MBRIF10		0x0400	/* RX Interrupt	Active In Mailbox 10 */
-#define	MBRIF11		0x0800	/* RX Interrupt	Active In Mailbox 11 */
-#define	MBRIF12		0x1000	/* RX Interrupt	Active In Mailbox 12 */
-#define	MBRIF13		0x2000	/* RX Interrupt	Active In Mailbox 13 */
-#define	MBRIF14		0x4000	/* RX Interrupt	Active In Mailbox 14 */
-#define	MBRIF15		0x8000	/* RX Interrupt	Active In Mailbox 15 */
-
-/* CAN_MBRIF2 Masks						 */
-#define	MBRIF16		0x0001	/* RX Interrupt	Active In Mailbox 16 */
-#define	MBRIF17		0x0002	/* RX Interrupt	Active In Mailbox 17 */
-#define	MBRIF18		0x0004	/* RX Interrupt	Active In Mailbox 18 */
-#define	MBRIF19		0x0008	/* RX Interrupt	Active In Mailbox 19 */
-#define	MBRIF20		0x0010	/* RX Interrupt	Active In Mailbox 20 */
-#define	MBRIF21		0x0020	/* RX Interrupt	Active In Mailbox 21 */
-#define	MBRIF22		0x0040	/* RX Interrupt	Active In Mailbox 22 */
-#define	MBRIF23		0x0080	/* RX Interrupt	Active In Mailbox 23 */
-#define	MBRIF24		0x0100	/* RX Interrupt	Active In Mailbox 24 */
-#define	MBRIF25		0x0200	/* RX Interrupt	Active In Mailbox 25 */
-#define	MBRIF26		0x0400	/* RX Interrupt	Active In Mailbox 26 */
-#define	MBRIF27		0x0800	/* RX Interrupt	Active In Mailbox 27 */
-#define	MBRIF28		0x1000	/* RX Interrupt	Active In Mailbox 28 */
-#define	MBRIF29		0x2000	/* RX Interrupt	Active In Mailbox 29 */
-#define	MBRIF30		0x4000	/* RX Interrupt	Active In Mailbox 30 */
-#define	MBRIF31		0x8000	/* RX Interrupt	Active In Mailbox 31 */
-
-/* CAN_MBIM1 Masks					 */
-#define	MBIM0		0x0001	/* Enable Interrupt For	Mailbox	0 */
-#define	MBIM1		0x0002	/* Enable Interrupt For	Mailbox	1 */
-#define	MBIM2		0x0004	/* Enable Interrupt For	Mailbox	2 */
-#define	MBIM3		0x0008	/* Enable Interrupt For	Mailbox	3 */
-#define	MBIM4		0x0010	/* Enable Interrupt For	Mailbox	4 */
-#define	MBIM5		0x0020	/* Enable Interrupt For	Mailbox	5 */
-#define	MBIM6		0x0040	/* Enable Interrupt For	Mailbox	6 */
-#define	MBIM7		0x0080	/* Enable Interrupt For	Mailbox	7 */
-#define	MBIM8		0x0100	/* Enable Interrupt For	Mailbox	8 */
-#define	MBIM9		0x0200	/* Enable Interrupt For	Mailbox	9 */
-#define	MBIM10		0x0400	/* Enable Interrupt For	Mailbox	10 */
-#define	MBIM11		0x0800	/* Enable Interrupt For	Mailbox	11 */
-#define	MBIM12		0x1000	/* Enable Interrupt For	Mailbox	12 */
-#define	MBIM13		0x2000	/* Enable Interrupt For	Mailbox	13 */
-#define	MBIM14		0x4000	/* Enable Interrupt For	Mailbox	14 */
-#define	MBIM15		0x8000	/* Enable Interrupt For	Mailbox	15 */
-
-/* CAN_MBIM2 Masks					 */
-#define	MBIM16		0x0001	/* Enable Interrupt For	Mailbox	16 */
-#define	MBIM17		0x0002	/* Enable Interrupt For	Mailbox	17 */
-#define	MBIM18		0x0004	/* Enable Interrupt For	Mailbox	18 */
-#define	MBIM19		0x0008	/* Enable Interrupt For	Mailbox	19 */
-#define	MBIM20		0x0010	/* Enable Interrupt For	Mailbox	20 */
-#define	MBIM21		0x0020	/* Enable Interrupt For	Mailbox	21 */
-#define	MBIM22		0x0040	/* Enable Interrupt For	Mailbox	22 */
-#define	MBIM23		0x0080	/* Enable Interrupt For	Mailbox	23 */
-#define	MBIM24		0x0100	/* Enable Interrupt For	Mailbox	24 */
-#define	MBIM25		0x0200	/* Enable Interrupt For	Mailbox	25 */
-#define	MBIM26		0x0400	/* Enable Interrupt For	Mailbox	26 */
-#define	MBIM27		0x0800	/* Enable Interrupt For	Mailbox	27 */
-#define	MBIM28		0x1000	/* Enable Interrupt For	Mailbox	28 */
-#define	MBIM29		0x2000	/* Enable Interrupt For	Mailbox	29 */
-#define	MBIM30		0x4000	/* Enable Interrupt For	Mailbox	30 */
-#define	MBIM31		0x8000	/* Enable Interrupt For	Mailbox	31 */
-
-/* CAN_GIM Masks									 */
-#define	EWTIM		0x0001	/* Enable TX Error Count Interrupt */
-#define	EWRIM		0x0002	/* Enable RX Error Count Interrupt */
-#define	EPIM		0x0004	/* Enable Error-Passive	Mode Interrupt */
-#define	BOIM		0x0008	/* Enable Bus Off Interrupt */
-#define	WUIM		0x0010	/* Enable Wake-Up Interrupt */
-#define	UIAIM		0x0020	/* Enable Access To Unimplemented Address Interrupt */
-#define	AAIM		0x0040	/* Enable Abort	Acknowledge Interrupt */
-#define	RMLIM		0x0080	/* Enable RX Message Lost Interrupt */
-#define	UCEIM		0x0100	/* Enable Universal Counter Overflow Interrupt */
-#define	EXTIM		0x0200	/* Enable External Trigger Output Interrupt */
-#define	ADIM		0x0400	/* Enable Access Denied	Interrupt */
-
-/* CAN_GIS Masks								 */
-#define	EWTIS		0x0001	/* TX Error Count IRQ Status */
-#define	EWRIS		0x0002	/* RX Error Count IRQ Status */
-#define	EPIS		0x0004	/* Error-Passive Mode IRQ Status */
-#define	BOIS		0x0008	/* Bus Off IRQ Status */
-#define	WUIS		0x0010	/* Wake-Up IRQ Status */
-#define	UIAIS		0x0020	/* Access To Unimplemented Address IRQ Status */
-#define	AAIS		0x0040	/* Abort Acknowledge IRQ Status */
-#define	RMLIS		0x0080	/* RX Message Lost IRQ Status */
-#define	UCEIS		0x0100	/* Universal Counter Overflow IRQ Status */
-#define	EXTIS		0x0200	/* External Trigger Output IRQ Status */
-#define	ADIS		0x0400	/* Access Denied IRQ Status */
-
-/* CAN_GIF Masks								 */
-#define	EWTIF		0x0001	/* TX Error Count IRQ Flag */
-#define	EWRIF		0x0002	/* RX Error Count IRQ Flag */
-#define	EPIF		0x0004	/* Error-Passive Mode IRQ Flag */
-#define	BOIF		0x0008	/* Bus Off IRQ Flag	 */
-#define	WUIF		0x0010	/* Wake-Up IRQ Flag	 */
-#define	UIAIF		0x0020	/* Access To Unimplemented Address IRQ Flag */
-#define	AAIF		0x0040	/* Abort Acknowledge IRQ Flag */
-#define	RMLIF		0x0080	/* RX Message Lost IRQ Flag */
-#define	UCEIF		0x0100	/* Universal Counter Overflow IRQ Flag */
-#define	EXTIF		0x0200	/* External Trigger Output IRQ Flag */
-#define	ADIF		0x0400	/* Access Denied IRQ Flag */
-
-/* CAN_UCCNF Masks								 */
-#define	UCCNF		0x000F	/* Universal Counter Mode */
-#define	UC_STAMP	0x0001	/*		Timestamp Mode */
-#define	UC_WDOG		0x0002	/*		Watchdog Mode */
-#define	UC_AUTOTX	0x0003	/*		Auto-Transmit Mode */
-#define	UC_ERROR	0x0006	/*		CAN Error Frame	Count */
-#define	UC_OVER		0x0007	/*		CAN Overload Frame Count */
-#define	UC_LOST		0x0008	/*		Arbitration Lost During	TX Count */
-#define	UC_AA		0x0009	/*		TX Abort Count */
-#define	UC_TA		0x000A	/*		TX Successful Count */
-#define	UC_REJECT	0x000B	/*		RX Message Rejected Count */
-#define	UC_RML		0x000C	/*		RX Message Lost	Count */
-#define	UC_RX		0x000D	/*		Total Successful RX Messages Count */
-#define	UC_RMP		0x000E	/*		Successful RX W/Matching ID Count */
-#define	UC_ALL		0x000F	/*		Correct	Message	On CAN Bus Line	Count */
-#define	UCRC		0x0020	/* Universal Counter Reload/Clear */
-#define	UCCT		0x0040	/* Universal Counter CAN Trigger */
-#define	UCE			0x0080	/* Universal Counter Enable */
-
-/* CAN_ESR Masks			 */
-#define	ACKE		0x0004	/* Acknowledge Error */
-#define	SER			0x0008	/* Stuff Error */
-#define	CRCE		0x0010	/* CRC Error */
-#define	SA0			0x0020	/* Stuck At Dominant Error */
-#define	BEF			0x0040	/* Bit Error Flag */
-#define	FER			0x0080	/* Form	Error Flag */
-
-/* CAN_EWR Masks					 */
-#define	EWLREC		0x00FF	/* RX Error Count Limit	(For EWRIS) */
-#define	EWLTEC		0xFF00	/* TX Error Count Limit	(For EWTIS) */
-
 #endif /* _DEF_BF539_H */
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-bf548/boards/cm_bf548.c linux-libre-2.6.35-gnu/arch/blackfin/mach-bf548/boards/cm_bf548.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-bf548/boards/cm_bf548.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-bf548/boards/cm_bf548.c	2010-08-01 18:11:14.000000000 -0400
@@ -498,6 +498,10 @@
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PH6,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-bf548/boards/ezkit.c linux-libre-2.6.35-gnu/arch/blackfin/mach-bf548/boards/ezkit.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-bf548/boards/ezkit.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-bf548/boards/ezkit.c	2010-08-01 18:11:14.000000000 -0400
@@ -603,6 +603,10 @@
 	.num_eps	= 8,
 	.dma_channels	= 8,
 	.gpio_vrsel	= GPIO_PE7,
+	/* Some custom boards need to be active low, just set it to "0"
+	 * if it is the case.
+	 */
+	.gpio_vrsel_active	= 1,
 };
 
 static struct musb_hdrc_platform_data musb_plat = {
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h linux-libre-2.6.35-gnu/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h	2010-08-01 18:11:14.000000000 -0400
@@ -2104,677 +2104,6 @@
 
 #define                    ECCCNT  0x3ff      /* Transfer Count */
 
-/* Bit masks for CAN0_CONTROL */
-
-#define                       SRS  0x1        /* Software Reset */
-#define                       DNM  0x2        /* DeviceNet Mode */
-#define                       ABO  0x4        /* Auto Bus On */
-#define                       WBA  0x10       /* Wakeup On CAN Bus Activity */
-#define                       SMR  0x20       /* Sleep Mode Request */
-#define                       CSR  0x40       /* CAN Suspend Mode Request */
-#define                       CCR  0x80       /* CAN Configuration Mode Request */
-
-/* Bit masks for CAN0_STATUS */
-
-#define                        WT  0x1        /* CAN Transmit Warning Flag */
-#define                        WR  0x2        /* CAN Receive Warning Flag */
-#define                        EP  0x4        /* CAN Error Passive Mode */
-#define                       EBO  0x8        /* CAN Error Bus Off Mode */
-#define                       CSA  0x40       /* CAN Suspend Mode Acknowledge */
-#define                       CCA  0x80       /* CAN Configuration Mode Acknowledge */
-#define                     MBPTR  0x1f00     /* Mailbox Pointer */
-#define                       TRM  0x4000     /* Transmit Mode Status */
-#define                       REC  0x8000     /* Receive Mode Status */
-
-/* Bit masks for CAN0_DEBUG */
-
-#define                       DEC  0x1        /* Disable Transmit/Receive Error Counters */
-#define                       DRI  0x2        /* Disable CANRX Input Pin */
-#define                       DTO  0x4        /* Disable CANTX Output Pin */
-#define                       DIL  0x8        /* Disable Internal Loop */
-#define                       MAA  0x10       /* Mode Auto-Acknowledge */
-#define                       MRB  0x20       /* Mode Read Back */
-#define                       CDE  0x8000     /* CAN Debug Mode Enable */
-
-/* Bit masks for CAN0_CLOCK */
-
-#define                       BRP  0x3ff      /* CAN Bit Rate Prescaler */
-
-/* Bit masks for CAN0_TIMING */
-
-#define                       SJW  0x300      /* Synchronization Jump Width */
-#define                       SAM  0x80       /* Sampling */
-#define                     TSEG2  0x70       /* Time Segment 2 */
-#define                     TSEG1  0xf        /* Time Segment 1 */
-
-/* Bit masks for CAN0_INTR */
-
-#define                     CANRX  0x80       /* Serial Input From Transceiver */
-#define                     CANTX  0x40       /* Serial Output To Transceiver */
-#define                     SMACK  0x8        /* Sleep Mode Acknowledge */
-#define                      GIRQ  0x4        /* Global Interrupt Request Status */
-#define                    MBTIRQ  0x2        /* Mailbox Transmit Interrupt Request */
-#define                    MBRIRQ  0x1        /* Mailbox Receive Interrupt Request */
-
-/* Bit masks for CAN0_GIM */
-
-#define                     EWTIM  0x1        /* Error Warning Transmit Interrupt Mask */
-#define                     EWRIM  0x2        /* Error Warning Receive Interrupt Mask */
-#define                      EPIM  0x4        /* Error Passive Interrupt Mask */
-#define                      BOIM  0x8        /* Bus Off Interrupt Mask */
-#define                      WUIM  0x10       /* Wakeup Interrupt Mask */
-#define                     UIAIM  0x20       /* Unimplemented Address Interrupt Mask */
-#define                      AAIM  0x40       /* Abort Acknowledge Interrupt Mask */
-#define                     RMLIM  0x80       /* Receive Message Lost Interrupt Mask */
-#define                     UCEIM  0x100      /* Universal Counter Exceeded Interrupt Mask */
-#define                      ADIM  0x400      /* Access Denied Interrupt Mask */
-
-/* Bit masks for CAN0_GIS */
-
-#define                     EWTIS  0x1        /* Error Warning Transmit Interrupt Status */
-#define                     EWRIS  0x2        /* Error Warning Receive Interrupt Status */
-#define                      EPIS  0x4        /* Error Passive Interrupt Status */
-#define                      BOIS  0x8        /* Bus Off Interrupt Status */
-#define                      WUIS  0x10       /* Wakeup Interrupt Status */
-#define                     UIAIS  0x20       /* Unimplemented Address Interrupt Status */
-#define                      AAIS  0x40       /* Abort Acknowledge Interrupt Status */
-#define                     RMLIS  0x80       /* Receive Message Lost Interrupt Status */
-#define                     UCEIS  0x100      /* Universal Counter Exceeded Interrupt Status */
-#define                      ADIS  0x400      /* Access Denied Interrupt Status */
-
-/* Bit masks for CAN0_GIF */
-
-#define                     EWTIF  0x1        /* Error Warning Transmit Interrupt Flag */
-#define                     EWRIF  0x2        /* Error Warning Receive Interrupt Flag */
-#define                      EPIF  0x4        /* Error Passive Interrupt Flag */
-#define                      BOIF  0x8        /* Bus Off Interrupt Flag */
-#define                      WUIF  0x10       /* Wakeup Interrupt Flag */
-#define                     UIAIF  0x20       /* Unimplemented Address Interrupt Flag */
-#define                      AAIF  0x40       /* Abort Acknowledge Interrupt Flag */
-#define                     RMLIF  0x80       /* Receive Message Lost Interrupt Flag */
-#define                     UCEIF  0x100      /* Universal Counter Exceeded Interrupt Flag */
-#define                      ADIF  0x400      /* Access Denied Interrupt Flag */
-
-/* Bit masks for CAN0_MBTD */
-
-#define                       TDR  0x80       /* Temporary Disable Request */
-#define                       TDA  0x40       /* Temporary Disable Acknowledge */
-#define                     TDPTR  0x1f       /* Temporary Disable Pointer */
-
-/* Bit masks for CAN0_UCCNF */
-
-#define                     UCCNF  0xf        /* Universal Counter Configuration */
-#define                      UCRC  0x20       /* Universal Counter Reload/Clear */
-#define                      UCCT  0x40       /* Universal Counter CAN Trigger */
-#define                       UCE  0x80       /* Universal Counter Enable */
-
-/* Bit masks for CAN0_CEC */
-
-#define                    RXECNT  0xff       /* Receive Error Counter */
-#define                    TXECNT  0xff00     /* Transmit Error Counter */
-
-/* Bit masks for CAN0_ESR */
-
-#define                       FER  0x80       /* Form Error */
-#define                       BEF  0x40       /* Bit Error Flag */
-#define                       SA0  0x20       /* Stuck At Dominant */
-#define                      CRCE  0x10       /* CRC Error */
-#define                       SER  0x8        /* Stuff Bit Error */
-#define                      ACKE  0x4        /* Acknowledge Error */
-
-/* Bit masks for CAN0_EWR */
-
-#define                    EWLTEC  0xff00     /* Transmit Error Warning Limit */
-#define                    EWLREC  0xff       /* Receive Error Warning Limit */
-
-/* Bit masks for CAN0_AMxx_H */
-
-#define                       FDF  0x8000     /* Filter On Data Field */
-#define                       FMD  0x4000     /* Full Mask Data */
-#define                     AMIDE  0x2000     /* Acceptance Mask Identifier Extension */
-#define                    BASEID  0x1ffc     /* Base Identifier */
-#define                  EXTID_HI  0x3        /* Extended Identifier High Bits */
-
-/* Bit masks for CAN0_AMxx_L */
-
-#define                  EXTID_LO  0xffff     /* Extended Identifier Low Bits */
-#define                       DFM  0xffff     /* Data Field Mask */
-
-/* Bit masks for CAN0_MBxx_ID1 */
-
-#define                       AME  0x8000     /* Acceptance Mask Enable */
-#define                       RTR  0x4000     /* Remote Transmission Request */
-#define                       IDE  0x2000     /* Identifier Extension */
-#define                    BASEID  0x1ffc     /* Base Identifier */
-#define                  EXTID_HI  0x3        /* Extended Identifier High Bits */
-
-/* Bit masks for CAN0_MBxx_ID0 */
-
-#define                  EXTID_LO  0xffff     /* Extended Identifier Low Bits */
-#define                       DFM  0xffff     /* Data Field Mask */
-
-/* Bit masks for CAN0_MBxx_TIMESTAMP */
-
-#define                       TSV  0xffff     /* Time Stamp Value */
-
-/* Bit masks for CAN0_MBxx_LENGTH */
-
-#define                       DLC  0xf        /* Data Length Code */
-
-/* Bit masks for CAN0_MBxx_DATA3 */
-
-#define                 CAN_BYTE0  0xff00     /* Data Field Byte 0 */
-#define                 CAN_BYTE1  0xff       /* Data Field Byte 1 */
-
-/* Bit masks for CAN0_MBxx_DATA2 */
-
-#define                 CAN_BYTE2  0xff00     /* Data Field Byte 2 */
-#define                 CAN_BYTE3  0xff       /* Data Field Byte 3 */
-
-/* Bit masks for CAN0_MBxx_DATA1 */
-
-#define                 CAN_BYTE4  0xff00     /* Data Field Byte 4 */
-#define                 CAN_BYTE5  0xff       /* Data Field Byte 5 */
-
-/* Bit masks for CAN0_MBxx_DATA0 */
-
-#define                 CAN_BYTE6  0xff00     /* Data Field Byte 6 */
-#define                 CAN_BYTE7  0xff       /* Data Field Byte 7 */
-
-/* Bit masks for CAN0_MC1 */
-
-#define                       MC0  0x1        /* Mailbox 0 Enable */
-#define                       MC1  0x2        /* Mailbox 1 Enable */
-#define                       MC2  0x4        /* Mailbox 2 Enable */
-#define                       MC3  0x8        /* Mailbox 3 Enable */
-#define                       MC4  0x10       /* Mailbox 4 Enable */
-#define                       MC5  0x20       /* Mailbox 5 Enable */
-#define                       MC6  0x40       /* Mailbox 6 Enable */
-#define                       MC7  0x80       /* Mailbox 7 Enable */
-#define                       MC8  0x100      /* Mailbox 8 Enable */
-#define                       MC9  0x200      /* Mailbox 9 Enable */
-#define                      MC10  0x400      /* Mailbox 10 Enable */
-#define                      MC11  0x800      /* Mailbox 11 Enable */
-#define                      MC12  0x1000     /* Mailbox 12 Enable */
-#define                      MC13  0x2000     /* Mailbox 13 Enable */
-#define                      MC14  0x4000     /* Mailbox 14 Enable */
-#define                      MC15  0x8000     /* Mailbox 15 Enable */
-
-/* Bit masks for CAN0_MC2 */
-
-#define                      MC16  0x1        /* Mailbox 16 Enable */
-#define                      MC17  0x2        /* Mailbox 17 Enable */
-#define                      MC18  0x4        /* Mailbox 18 Enable */
-#define                      MC19  0x8        /* Mailbox 19 Enable */
-#define                      MC20  0x10       /* Mailbox 20 Enable */
-#define                      MC21  0x20       /* Mailbox 21 Enable */
-#define                      MC22  0x40       /* Mailbox 22 Enable */
-#define                      MC23  0x80       /* Mailbox 23 Enable */
-#define                      MC24  0x100      /* Mailbox 24 Enable */
-#define                      MC25  0x200      /* Mailbox 25 Enable */
-#define                      MC26  0x400      /* Mailbox 26 Enable */
-#define                      MC27  0x800      /* Mailbox 27 Enable */
-#define                      MC28  0x1000     /* Mailbox 28 Enable */
-#define                      MC29  0x2000     /* Mailbox 29 Enable */
-#define                      MC30  0x4000     /* Mailbox 30 Enable */
-#define                      MC31  0x8000     /* Mailbox 31 Enable */
-
-/* Bit masks for CAN0_MD1 */
-
-#define                       MD0  0x1        /* Mailbox 0 Receive Enable */
-#define                       MD1  0x2        /* Mailbox 1 Receive Enable */
-#define                       MD2  0x4        /* Mailbox 2 Receive Enable */
-#define                       MD3  0x8        /* Mailbox 3 Receive Enable */
-#define                       MD4  0x10       /* Mailbox 4 Receive Enable */
-#define                       MD5  0x20       /* Mailbox 5 Receive Enable */
-#define                       MD6  0x40       /* Mailbox 6 Receive Enable */
-#define                       MD7  0x80       /* Mailbox 7 Receive Enable */
-#define                       MD8  0x100      /* Mailbox 8 Receive Enable */
-#define                       MD9  0x200      /* Mailbox 9 Receive Enable */
-#define                      MD10  0x400      /* Mailbox 10 Receive Enable */
-#define                      MD11  0x800      /* Mailbox 11 Receive Enable */
-#define                      MD12  0x1000     /* Mailbox 12 Receive Enable */
-#define                      MD13  0x2000     /* Mailbox 13 Receive Enable */
-#define                      MD14  0x4000     /* Mailbox 14 Receive Enable */
-#define                      MD15  0x8000     /* Mailbox 15 Receive Enable */
-
-/* Bit masks for CAN0_MD2 */
-
-#define                      MD16  0x1        /* Mailbox 16 Receive Enable */
-#define                      MD17  0x2        /* Mailbox 17 Receive Enable */
-#define                      MD18  0x4        /* Mailbox 18 Receive Enable */
-#define                      MD19  0x8        /* Mailbox 19 Receive Enable */
-#define                      MD20  0x10       /* Mailbox 20 Receive Enable */
-#define                      MD21  0x20       /* Mailbox 21 Receive Enable */
-#define                      MD22  0x40       /* Mailbox 22 Receive Enable */
-#define                      MD23  0x80       /* Mailbox 23 Receive Enable */
-#define                      MD24  0x100      /* Mailbox 24 Receive Enable */
-#define                      MD25  0x200      /* Mailbox 25 Receive Enable */
-#define                      MD26  0x400      /* Mailbox 26 Receive Enable */
-#define                      MD27  0x800      /* Mailbox 27 Receive Enable */
-#define                      MD28  0x1000     /* Mailbox 28 Receive Enable */
-#define                      MD29  0x2000     /* Mailbox 29 Receive Enable */
-#define                      MD30  0x4000     /* Mailbox 30 Receive Enable */
-#define                      MD31  0x8000     /* Mailbox 31 Receive Enable */
-
-/* Bit masks for CAN0_RMP1 */
-
-#define                      RMP0  0x1        /* Mailbox 0 Receive Message Pending */
-#define                      RMP1  0x2        /* Mailbox 1 Receive Message Pending */
-#define                      RMP2  0x4        /* Mailbox 2 Receive Message Pending */
-#define                      RMP3  0x8        /* Mailbox 3 Receive Message Pending */
-#define                      RMP4  0x10       /* Mailbox 4 Receive Message Pending */
-#define                      RMP5  0x20       /* Mailbox 5 Receive Message Pending */
-#define                      RMP6  0x40       /* Mailbox 6 Receive Message Pending */
-#define                      RMP7  0x80       /* Mailbox 7 Receive Message Pending */
-#define                      RMP8  0x100      /* Mailbox 8 Receive Message Pending */
-#define                      RMP9  0x200      /* Mailbox 9 Receive Message Pending */
-#define                     RMP10  0x400      /* Mailbox 10 Receive Message Pending */
-#define                     RMP11  0x800      /* Mailbox 11 Receive Message Pending */
-#define                     RMP12  0x1000     /* Mailbox 12 Receive Message Pending */
-#define                     RMP13  0x2000     /* Mailbox 13 Receive Message Pending */
-#define                     RMP14  0x4000     /* Mailbox 14 Receive Message Pending */
-#define                     RMP15  0x8000     /* Mailbox 15 Receive Message Pending */
-
-/* Bit masks for CAN0_RMP2 */
-
-#define                     RMP16  0x1        /* Mailbox 16 Receive Message Pending */
-#define                     RMP17  0x2        /* Mailbox 17 Receive Message Pending */
-#define                     RMP18  0x4        /* Mailbox 18 Receive Message Pending */
-#define                     RMP19  0x8        /* Mailbox 19 Receive Message Pending */
-#define                     RMP20  0x10       /* Mailbox 20 Receive Message Pending */
-#define                     RMP21  0x20       /* Mailbox 21 Receive Message Pending */
-#define                     RMP22  0x40       /* Mailbox 22 Receive Message Pending */
-#define                     RMP23  0x80       /* Mailbox 23 Receive Message Pending */
-#define                     RMP24  0x100      /* Mailbox 24 Receive Message Pending */
-#define                     RMP25  0x200      /* Mailbox 25 Receive Message Pending */
-#define                     RMP26  0x400      /* Mailbox 26 Receive Message Pending */
-#define                     RMP27  0x800      /* Mailbox 27 Receive Message Pending */
-#define                     RMP28  0x1000     /* Mailbox 28 Receive Message Pending */
-#define                     RMP29  0x2000     /* Mailbox 29 Receive Message Pending */
-#define                     RMP30  0x4000     /* Mailbox 30 Receive Message Pending */
-#define                     RMP31  0x8000     /* Mailbox 31 Receive Message Pending */
-
-/* Bit masks for CAN0_RML1 */
-
-#define                      RML0  0x1        /* Mailbox 0 Receive Message Lost */
-#define                      RML1  0x2        /* Mailbox 1 Receive Message Lost */
-#define                      RML2  0x4        /* Mailbox 2 Receive Message Lost */
-#define                      RML3  0x8        /* Mailbox 3 Receive Message Lost */
-#define                      RML4  0x10       /* Mailbox 4 Receive Message Lost */
-#define                      RML5  0x20       /* Mailbox 5 Receive Message Lost */
-#define                      RML6  0x40       /* Mailbox 6 Receive Message Lost */
-#define                      RML7  0x80       /* Mailbox 7 Receive Message Lost */
-#define                      RML8  0x100      /* Mailbox 8 Receive Message Lost */
-#define                      RML9  0x200      /* Mailbox 9 Receive Message Lost */
-#define                     RML10  0x400      /* Mailbox 10 Receive Message Lost */
-#define                     RML11  0x800      /* Mailbox 11 Receive Message Lost */
-#define                     RML12  0x1000     /* Mailbox 12 Receive Message Lost */
-#define                     RML13  0x2000     /* Mailbox 13 Receive Message Lost */
-#define                     RML14  0x4000     /* Mailbox 14 Receive Message Lost */
-#define                     RML15  0x8000     /* Mailbox 15 Receive Message Lost */
-
-/* Bit masks for CAN0_RML2 */
-
-#define                     RML16  0x1        /* Mailbox 16 Receive Message Lost */
-#define                     RML17  0x2        /* Mailbox 17 Receive Message Lost */
-#define                     RML18  0x4        /* Mailbox 18 Receive Message Lost */
-#define                     RML19  0x8        /* Mailbox 19 Receive Message Lost */
-#define                     RML20  0x10       /* Mailbox 20 Receive Message Lost */
-#define                     RML21  0x20       /* Mailbox 21 Receive Message Lost */
-#define                     RML22  0x40       /* Mailbox 22 Receive Message Lost */
-#define                     RML23  0x80       /* Mailbox 23 Receive Message Lost */
-#define                     RML24  0x100      /* Mailbox 24 Receive Message Lost */
-#define                     RML25  0x200      /* Mailbox 25 Receive Message Lost */
-#define                     RML26  0x400      /* Mailbox 26 Receive Message Lost */
-#define                     RML27  0x800      /* Mailbox 27 Receive Message Lost */
-#define                     RML28  0x1000     /* Mailbox 28 Receive Message Lost */
-#define                     RML29  0x2000     /* Mailbox 29 Receive Message Lost */
-#define                     RML30  0x4000     /* Mailbox 30 Receive Message Lost */
-#define                     RML31  0x8000     /* Mailbox 31 Receive Message Lost */
-
-/* Bit masks for CAN0_OPSS1 */
-
-#define                     OPSS0  0x1        /* Mailbox 0 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS1  0x2        /* Mailbox 1 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS2  0x4        /* Mailbox 2 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS3  0x8        /* Mailbox 3 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS4  0x10       /* Mailbox 4 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS5  0x20       /* Mailbox 5 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS6  0x40       /* Mailbox 6 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS7  0x80       /* Mailbox 7 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS8  0x100      /* Mailbox 8 Overwrite Protection/Single-Shot Transmission Enable */
-#define                     OPSS9  0x200      /* Mailbox 9 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS10  0x400      /* Mailbox 10 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS11  0x800      /* Mailbox 11 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS12  0x1000     /* Mailbox 12 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS13  0x2000     /* Mailbox 13 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS14  0x4000     /* Mailbox 14 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS15  0x8000     /* Mailbox 15 Overwrite Protection/Single-Shot Transmission Enable */
-
-/* Bit masks for CAN0_OPSS2 */
-
-#define                    OPSS16  0x1        /* Mailbox 16 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS17  0x2        /* Mailbox 17 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS18  0x4        /* Mailbox 18 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS19  0x8        /* Mailbox 19 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS20  0x10       /* Mailbox 20 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS21  0x20       /* Mailbox 21 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS22  0x40       /* Mailbox 22 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS23  0x80       /* Mailbox 23 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS24  0x100      /* Mailbox 24 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS25  0x200      /* Mailbox 25 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS26  0x400      /* Mailbox 26 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS27  0x800      /* Mailbox 27 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS28  0x1000     /* Mailbox 28 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS29  0x2000     /* Mailbox 29 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS30  0x4000     /* Mailbox 30 Overwrite Protection/Single-Shot Transmission Enable */
-#define                    OPSS31  0x8000     /* Mailbox 31 Overwrite Protection/Single-Shot Transmission Enable */
-
-/* Bit masks for CAN0_TRS1 */
-
-#define                      TRS0  0x1        /* Mailbox 0 Transmit Request Set */
-#define                      TRS1  0x2        /* Mailbox 1 Transmit Request Set */
-#define                      TRS2  0x4        /* Mailbox 2 Transmit Request Set */
-#define                      TRS3  0x8        /* Mailbox 3 Transmit Request Set */
-#define                      TRS4  0x10       /* Mailbox 4 Transmit Request Set */
-#define                      TRS5  0x20       /* Mailbox 5 Transmit Request Set */
-#define                      TRS6  0x40       /* Mailbox 6 Transmit Request Set */
-#define                      TRS7  0x80       /* Mailbox 7 Transmit Request Set */
-#define                      TRS8  0x100      /* Mailbox 8 Transmit Request Set */
-#define                      TRS9  0x200      /* Mailbox 9 Transmit Request Set */
-#define                     TRS10  0x400      /* Mailbox 10 Transmit Request Set */
-#define                     TRS11  0x800      /* Mailbox 11 Transmit Request Set */
-#define                     TRS12  0x1000     /* Mailbox 12 Transmit Request Set */
-#define                     TRS13  0x2000     /* Mailbox 13 Transmit Request Set */
-#define                     TRS14  0x4000     /* Mailbox 14 Transmit Request Set */
-#define                     TRS15  0x8000     /* Mailbox 15 Transmit Request Set */
-
-/* Bit masks for CAN0_TRS2 */
-
-#define                     TRS16  0x1        /* Mailbox 16 Transmit Request Set */
-#define                     TRS17  0x2        /* Mailbox 17 Transmit Request Set */
-#define                     TRS18  0x4        /* Mailbox 18 Transmit Request Set */
-#define                     TRS19  0x8        /* Mailbox 19 Transmit Request Set */
-#define                     TRS20  0x10       /* Mailbox 20 Transmit Request Set */
-#define                     TRS21  0x20       /* Mailbox 21 Transmit Request Set */
-#define                     TRS22  0x40       /* Mailbox 22 Transmit Request Set */
-#define                     TRS23  0x80       /* Mailbox 23 Transmit Request Set */
-#define                     TRS24  0x100      /* Mailbox 24 Transmit Request Set */
-#define                     TRS25  0x200      /* Mailbox 25 Transmit Request Set */
-#define                     TRS26  0x400      /* Mailbox 26 Transmit Request Set */
-#define                     TRS27  0x800      /* Mailbox 27 Transmit Request Set */
-#define                     TRS28  0x1000     /* Mailbox 28 Transmit Request Set */
-#define                     TRS29  0x2000     /* Mailbox 29 Transmit Request Set */
-#define                     TRS30  0x4000     /* Mailbox 30 Transmit Request Set */
-#define                     TRS31  0x8000     /* Mailbox 31 Transmit Request Set */
-
-/* Bit masks for CAN0_TRR1 */
-
-#define                      TRR0  0x1        /* Mailbox 0 Transmit Request Reset */
-#define                      TRR1  0x2        /* Mailbox 1 Transmit Request Reset */
-#define                      TRR2  0x4        /* Mailbox 2 Transmit Request Reset */
-#define                      TRR3  0x8        /* Mailbox 3 Transmit Request Reset */
-#define                      TRR4  0x10       /* Mailbox 4 Transmit Request Reset */
-#define                      TRR5  0x20       /* Mailbox 5 Transmit Request Reset */
-#define                      TRR6  0x40       /* Mailbox 6 Transmit Request Reset */
-#define                      TRR7  0x80       /* Mailbox 7 Transmit Request Reset */
-#define                      TRR8  0x100      /* Mailbox 8 Transmit Request Reset */
-#define                      TRR9  0x200      /* Mailbox 9 Transmit Request Reset */
-#define                     TRR10  0x400      /* Mailbox 10 Transmit Request Reset */
-#define                     TRR11  0x800      /* Mailbox 11 Transmit Request Reset */
-#define                     TRR12  0x1000     /* Mailbox 12 Transmit Request Reset */
-#define                     TRR13  0x2000     /* Mailbox 13 Transmit Request Reset */
-#define                     TRR14  0x4000     /* Mailbox 14 Transmit Request Reset */
-#define                     TRR15  0x8000     /* Mailbox 15 Transmit Request Reset */
-
-/* Bit masks for CAN0_TRR2 */
-
-#define                     TRR16  0x1        /* Mailbox 16 Transmit Request Reset */
-#define                     TRR17  0x2        /* Mailbox 17 Transmit Request Reset */
-#define                     TRR18  0x4        /* Mailbox 18 Transmit Request Reset */
-#define                     TRR19  0x8        /* Mailbox 19 Transmit Request Reset */
-#define                     TRR20  0x10       /* Mailbox 20 Transmit Request Reset */
-#define                     TRR21  0x20       /* Mailbox 21 Transmit Request Reset */
-#define                     TRR22  0x40       /* Mailbox 22 Transmit Request Reset */
-#define                     TRR23  0x80       /* Mailbox 23 Transmit Request Reset */
-#define                     TRR24  0x100      /* Mailbox 24 Transmit Request Reset */
-#define                     TRR25  0x200      /* Mailbox 25 Transmit Request Reset */
-#define                     TRR26  0x400      /* Mailbox 26 Transmit Request Reset */
-#define                     TRR27  0x800      /* Mailbox 27 Transmit Request Reset */
-#define                     TRR28  0x1000     /* Mailbox 28 Transmit Request Reset */
-#define                     TRR29  0x2000     /* Mailbox 29 Transmit Request Reset */
-#define                     TRR30  0x4000     /* Mailbox 30 Transmit Request Reset */
-#define                     TRR31  0x8000     /* Mailbox 31 Transmit Request Reset */
-
-/* Bit masks for CAN0_AA1 */
-
-#define                       AA0  0x1        /* Mailbox 0 Abort Acknowledge */
-#define                       AA1  0x2        /* Mailbox 1 Abort Acknowledge */
-#define                       AA2  0x4        /* Mailbox 2 Abort Acknowledge */
-#define                       AA3  0x8        /* Mailbox 3 Abort Acknowledge */
-#define                       AA4  0x10       /* Mailbox 4 Abort Acknowledge */
-#define                       AA5  0x20       /* Mailbox 5 Abort Acknowledge */
-#define                       AA6  0x40       /* Mailbox 6 Abort Acknowledge */
-#define                       AA7  0x80       /* Mailbox 7 Abort Acknowledge */
-#define                       AA8  0x100      /* Mailbox 8 Abort Acknowledge */
-#define                       AA9  0x200      /* Mailbox 9 Abort Acknowledge */
-#define                      AA10  0x400      /* Mailbox 10 Abort Acknowledge */
-#define                      AA11  0x800      /* Mailbox 11 Abort Acknowledge */
-#define                      AA12  0x1000     /* Mailbox 12 Abort Acknowledge */
-#define                      AA13  0x2000     /* Mailbox 13 Abort Acknowledge */
-#define                      AA14  0x4000     /* Mailbox 14 Abort Acknowledge */
-#define                      AA15  0x8000     /* Mailbox 15 Abort Acknowledge */
-
-/* Bit masks for CAN0_AA2 */
-
-#define                      AA16  0x1        /* Mailbox 16 Abort Acknowledge */
-#define                      AA17  0x2        /* Mailbox 17 Abort Acknowledge */
-#define                      AA18  0x4        /* Mailbox 18 Abort Acknowledge */
-#define                      AA19  0x8        /* Mailbox 19 Abort Acknowledge */
-#define                      AA20  0x10       /* Mailbox 20 Abort Acknowledge */
-#define                      AA21  0x20       /* Mailbox 21 Abort Acknowledge */
-#define                      AA22  0x40       /* Mailbox 22 Abort Acknowledge */
-#define                      AA23  0x80       /* Mailbox 23 Abort Acknowledge */
-#define                      AA24  0x100      /* Mailbox 24 Abort Acknowledge */
-#define                      AA25  0x200      /* Mailbox 25 Abort Acknowledge */
-#define                      AA26  0x400      /* Mailbox 26 Abort Acknowledge */
-#define                      AA27  0x800      /* Mailbox 27 Abort Acknowledge */
-#define                      AA28  0x1000     /* Mailbox 28 Abort Acknowledge */
-#define                      AA29  0x2000     /* Mailbox 29 Abort Acknowledge */
-#define                      AA30  0x4000     /* Mailbox 30 Abort Acknowledge */
-#define                      AA31  0x8000     /* Mailbox 31 Abort Acknowledge */
-
-/* Bit masks for CAN0_TA1 */
-
-#define                       TA0  0x1        /* Mailbox 0 Transmit Acknowledge */
-#define                       TA1  0x2        /* Mailbox 1 Transmit Acknowledge */
-#define                       TA2  0x4        /* Mailbox 2 Transmit Acknowledge */
-#define                       TA3  0x8        /* Mailbox 3 Transmit Acknowledge */
-#define                       TA4  0x10       /* Mailbox 4 Transmit Acknowledge */
-#define                       TA5  0x20       /* Mailbox 5 Transmit Acknowledge */
-#define                       TA6  0x40       /* Mailbox 6 Transmit Acknowledge */
-#define                       TA7  0x80       /* Mailbox 7 Transmit Acknowledge */
-#define                       TA8  0x100      /* Mailbox 8 Transmit Acknowledge */
-#define                       TA9  0x200      /* Mailbox 9 Transmit Acknowledge */
-#define                      TA10  0x400      /* Mailbox 10 Transmit Acknowledge */
-#define                      TA11  0x800      /* Mailbox 11 Transmit Acknowledge */
-#define                      TA12  0x1000     /* Mailbox 12 Transmit Acknowledge */
-#define                      TA13  0x2000     /* Mailbox 13 Transmit Acknowledge */
-#define                      TA14  0x4000     /* Mailbox 14 Transmit Acknowledge */
-#define                      TA15  0x8000     /* Mailbox 15 Transmit Acknowledge */
-
-/* Bit masks for CAN0_TA2 */
-
-#define                      TA16  0x1        /* Mailbox 16 Transmit Acknowledge */
-#define                      TA17  0x2        /* Mailbox 17 Transmit Acknowledge */
-#define                      TA18  0x4        /* Mailbox 18 Transmit Acknowledge */
-#define                      TA19  0x8        /* Mailbox 19 Transmit Acknowledge */
-#define                      TA20  0x10       /* Mailbox 20 Transmit Acknowledge */
-#define                      TA21  0x20       /* Mailbox 21 Transmit Acknowledge */
-#define                      TA22  0x40       /* Mailbox 22 Transmit Acknowledge */
-#define                      TA23  0x80       /* Mailbox 23 Transmit Acknowledge */
-#define                      TA24  0x100      /* Mailbox 24 Transmit Acknowledge */
-#define                      TA25  0x200      /* Mailbox 25 Transmit Acknowledge */
-#define                      TA26  0x400      /* Mailbox 26 Transmit Acknowledge */
-#define                      TA27  0x800      /* Mailbox 27 Transmit Acknowledge */
-#define                      TA28  0x1000     /* Mailbox 28 Transmit Acknowledge */
-#define                      TA29  0x2000     /* Mailbox 29 Transmit Acknowledge */
-#define                      TA30  0x4000     /* Mailbox 30 Transmit Acknowledge */
-#define                      TA31  0x8000     /* Mailbox 31 Transmit Acknowledge */
-
-/* Bit masks for CAN0_RFH1 */
-
-#define                      RFH0  0x1        /* Mailbox 0 Remote Frame Handling Enable */
-#define                      RFH1  0x2        /* Mailbox 1 Remote Frame Handling Enable */
-#define                      RFH2  0x4        /* Mailbox 2 Remote Frame Handling Enable */
-#define                      RFH3  0x8        /* Mailbox 3 Remote Frame Handling Enable */
-#define                      RFH4  0x10       /* Mailbox 4 Remote Frame Handling Enable */
-#define                      RFH5  0x20       /* Mailbox 5 Remote Frame Handling Enable */
-#define                      RFH6  0x40       /* Mailbox 6 Remote Frame Handling Enable */
-#define                      RFH7  0x80       /* Mailbox 7 Remote Frame Handling Enable */
-#define                      RFH8  0x100      /* Mailbox 8 Remote Frame Handling Enable */
-#define                      RFH9  0x200      /* Mailbox 9 Remote Frame Handling Enable */
-#define                     RFH10  0x400      /* Mailbox 10 Remote Frame Handling Enable */
-#define                     RFH11  0x800      /* Mailbox 11 Remote Frame Handling Enable */
-#define                     RFH12  0x1000     /* Mailbox 12 Remote Frame Handling Enable */
-#define                     RFH13  0x2000     /* Mailbox 13 Remote Frame Handling Enable */
-#define                     RFH14  0x4000     /* Mailbox 14 Remote Frame Handling Enable */
-#define                     RFH15  0x8000     /* Mailbox 15 Remote Frame Handling Enable */
-
-/* Bit masks for CAN0_RFH2 */
-
-#define                     RFH16  0x1        /* Mailbox 16 Remote Frame Handling Enable */
-#define                     RFH17  0x2        /* Mailbox 17 Remote Frame Handling Enable */
-#define                     RFH18  0x4        /* Mailbox 18 Remote Frame Handling Enable */
-#define                     RFH19  0x8        /* Mailbox 19 Remote Frame Handling Enable */
-#define                     RFH20  0x10       /* Mailbox 20 Remote Frame Handling Enable */
-#define                     RFH21  0x20       /* Mailbox 21 Remote Frame Handling Enable */
-#define                     RFH22  0x40       /* Mailbox 22 Remote Frame Handling Enable */
-#define                     RFH23  0x80       /* Mailbox 23 Remote Frame Handling Enable */
-#define                     RFH24  0x100      /* Mailbox 24 Remote Frame Handling Enable */
-#define                     RFH25  0x200      /* Mailbox 25 Remote Frame Handling Enable */
-#define                     RFH26  0x400      /* Mailbox 26 Remote Frame Handling Enable */
-#define                     RFH27  0x800      /* Mailbox 27 Remote Frame Handling Enable */
-#define                     RFH28  0x1000     /* Mailbox 28 Remote Frame Handling Enable */
-#define                     RFH29  0x2000     /* Mailbox 29 Remote Frame Handling Enable */
-#define                     RFH30  0x4000     /* Mailbox 30 Remote Frame Handling Enable */
-#define                     RFH31  0x8000     /* Mailbox 31 Remote Frame Handling Enable */
-
-/* Bit masks for CAN0_MBIM1 */
-
-#define                     MBIM0  0x1        /* Mailbox 0 Mailbox Interrupt Mask */
-#define                     MBIM1  0x2        /* Mailbox 1 Mailbox Interrupt Mask */
-#define                     MBIM2  0x4        /* Mailbox 2 Mailbox Interrupt Mask */
-#define                     MBIM3  0x8        /* Mailbox 3 Mailbox Interrupt Mask */
-#define                     MBIM4  0x10       /* Mailbox 4 Mailbox Interrupt Mask */
-#define                     MBIM5  0x20       /* Mailbox 5 Mailbox Interrupt Mask */
-#define                     MBIM6  0x40       /* Mailbox 6 Mailbox Interrupt Mask */
-#define                     MBIM7  0x80       /* Mailbox 7 Mailbox Interrupt Mask */
-#define                     MBIM8  0x100      /* Mailbox 8 Mailbox Interrupt Mask */
-#define                     MBIM9  0x200      /* Mailbox 9 Mailbox Interrupt Mask */
-#define                    MBIM10  0x400      /* Mailbox 10 Mailbox Interrupt Mask */
-#define                    MBIM11  0x800      /* Mailbox 11 Mailbox Interrupt Mask */
-#define                    MBIM12  0x1000     /* Mailbox 12 Mailbox Interrupt Mask */
-#define                    MBIM13  0x2000     /* Mailbox 13 Mailbox Interrupt Mask */
-#define                    MBIM14  0x4000     /* Mailbox 14 Mailbox Interrupt Mask */
-#define                    MBIM15  0x8000     /* Mailbox 15 Mailbox Interrupt Mask */
-
-/* Bit masks for CAN0_MBIM2 */
-
-#define                    MBIM16  0x1        /* Mailbox 16 Mailbox Interrupt Mask */
-#define                    MBIM17  0x2        /* Mailbox 17 Mailbox Interrupt Mask */
-#define                    MBIM18  0x4        /* Mailbox 18 Mailbox Interrupt Mask */
-#define                    MBIM19  0x8        /* Mailbox 19 Mailbox Interrupt Mask */
-#define                    MBIM20  0x10       /* Mailbox 20 Mailbox Interrupt Mask */
-#define                    MBIM21  0x20       /* Mailbox 21 Mailbox Interrupt Mask */
-#define                    MBIM22  0x40       /* Mailbox 22 Mailbox Interrupt Mask */
-#define                    MBIM23  0x80       /* Mailbox 23 Mailbox Interrupt Mask */
-#define                    MBIM24  0x100      /* Mailbox 24 Mailbox Interrupt Mask */
-#define                    MBIM25  0x200      /* Mailbox 25 Mailbox Interrupt Mask */
-#define                    MBIM26  0x400      /* Mailbox 26 Mailbox Interrupt Mask */
-#define                    MBIM27  0x800      /* Mailbox 27 Mailbox Interrupt Mask */
-#define                    MBIM28  0x1000     /* Mailbox 28 Mailbox Interrupt Mask */
-#define                    MBIM29  0x2000     /* Mailbox 29 Mailbox Interrupt Mask */
-#define                    MBIM30  0x4000     /* Mailbox 30 Mailbox Interrupt Mask */
-#define                    MBIM31  0x8000     /* Mailbox 31 Mailbox Interrupt Mask */
-
-/* Bit masks for CAN0_MBTIF1 */
-
-#define                    MBTIF0  0x1        /* Mailbox 0 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF1  0x2        /* Mailbox 1 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF2  0x4        /* Mailbox 2 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF3  0x8        /* Mailbox 3 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF4  0x10       /* Mailbox 4 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF5  0x20       /* Mailbox 5 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF6  0x40       /* Mailbox 6 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF7  0x80       /* Mailbox 7 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF8  0x100      /* Mailbox 8 Mailbox Transmit Interrupt Flag */
-#define                    MBTIF9  0x200      /* Mailbox 9 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF10  0x400      /* Mailbox 10 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF11  0x800      /* Mailbox 11 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF12  0x1000     /* Mailbox 12 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF13  0x2000     /* Mailbox 13 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF14  0x4000     /* Mailbox 14 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF15  0x8000     /* Mailbox 15 Mailbox Transmit Interrupt Flag */
-
-/* Bit masks for CAN0_MBTIF2 */
-
-#define                   MBTIF16  0x1        /* Mailbox 16 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF17  0x2        /* Mailbox 17 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF18  0x4        /* Mailbox 18 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF19  0x8        /* Mailbox 19 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF20  0x10       /* Mailbox 20 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF21  0x20       /* Mailbox 21 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF22  0x40       /* Mailbox 22 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF23  0x80       /* Mailbox 23 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF24  0x100      /* Mailbox 24 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF25  0x200      /* Mailbox 25 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF26  0x400      /* Mailbox 26 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF27  0x800      /* Mailbox 27 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF28  0x1000     /* Mailbox 28 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF29  0x2000     /* Mailbox 29 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF30  0x4000     /* Mailbox 30 Mailbox Transmit Interrupt Flag */
-#define                   MBTIF31  0x8000     /* Mailbox 31 Mailbox Transmit Interrupt Flag */
-
-/* Bit masks for CAN0_MBRIF1 */
-
-#define                    MBRIF0  0x1        /* Mailbox 0 Mailbox Receive Interrupt Flag */
-#define                    MBRIF1  0x2        /* Mailbox 1 Mailbox Receive Interrupt Flag */
-#define                    MBRIF2  0x4        /* Mailbox 2 Mailbox Receive Interrupt Flag */
-#define                    MBRIF3  0x8        /* Mailbox 3 Mailbox Receive Interrupt Flag */
-#define                    MBRIF4  0x10       /* Mailbox 4 Mailbox Receive Interrupt Flag */
-#define                    MBRIF5  0x20       /* Mailbox 5 Mailbox Receive Interrupt Flag */
-#define                    MBRIF6  0x40       /* Mailbox 6 Mailbox Receive Interrupt Flag */
-#define                    MBRIF7  0x80       /* Mailbox 7 Mailbox Receive Interrupt Flag */
-#define                    MBRIF8  0x100      /* Mailbox 8 Mailbox Receive Interrupt Flag */
-#define                    MBRIF9  0x200      /* Mailbox 9 Mailbox Receive Interrupt Flag */
-#define                   MBRIF10  0x400      /* Mailbox 10 Mailbox Receive Interrupt Flag */
-#define                   MBRIF11  0x800      /* Mailbox 11 Mailbox Receive Interrupt Flag */
-#define                   MBRIF12  0x1000     /* Mailbox 12 Mailbox Receive Interrupt Flag */
-#define                   MBRIF13  0x2000     /* Mailbox 13 Mailbox Receive Interrupt Flag */
-#define                   MBRIF14  0x4000     /* Mailbox 14 Mailbox Receive Interrupt Flag */
-#define                   MBRIF15  0x8000     /* Mailbox 15 Mailbox Receive Interrupt Flag */
-
-/* Bit masks for CAN0_MBRIF2 */
-
-#define                   MBRIF16  0x1        /* Mailbox 16 Mailbox Receive Interrupt Flag */
-#define                   MBRIF17  0x2        /* Mailbox 17 Mailbox Receive Interrupt Flag */
-#define                   MBRIF18  0x4        /* Mailbox 18 Mailbox Receive Interrupt Flag */
-#define                   MBRIF19  0x8        /* Mailbox 19 Mailbox Receive Interrupt Flag */
-#define                   MBRIF20  0x10       /* Mailbox 20 Mailbox Receive Interrupt Flag */
-#define                   MBRIF21  0x20       /* Mailbox 21 Mailbox Receive Interrupt Flag */
-#define                   MBRIF22  0x40       /* Mailbox 22 Mailbox Receive Interrupt Flag */
-#define                   MBRIF23  0x80       /* Mailbox 23 Mailbox Receive Interrupt Flag */
-#define                   MBRIF24  0x100      /* Mailbox 24 Mailbox Receive Interrupt Flag */
-#define                   MBRIF25  0x200      /* Mailbox 25 Mailbox Receive Interrupt Flag */
-#define                   MBRIF26  0x400      /* Mailbox 26 Mailbox Receive Interrupt Flag */
-#define                   MBRIF27  0x800      /* Mailbox 27 Mailbox Receive Interrupt Flag */
-#define                   MBRIF28  0x1000     /* Mailbox 28 Mailbox Receive Interrupt Flag */
-#define                   MBRIF29  0x2000     /* Mailbox 29 Mailbox Receive Interrupt Flag */
-#define                   MBRIF30  0x4000     /* Mailbox 30 Mailbox Receive Interrupt Flag */
-#define                   MBRIF31  0x8000     /* Mailbox 31 Mailbox Receive Interrupt Flag */
-
 /* Bit masks for EPPIx_STATUS */
 
 #define                 CFIFO_ERR  0x1        /* Chroma FIFO Error */
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-bf561/boards/acvilon.c linux-libre-2.6.35-gnu/arch/blackfin/mach-bf561/boards/acvilon.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-bf561/boards/acvilon.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-bf561/boards/acvilon.c	2010-08-01 18:11:14.000000000 -0400
@@ -44,6 +44,7 @@
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/jiffies.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -112,7 +113,7 @@
 struct i2c_pca9564_pf_platform_data pca9564_platform_data = {
 	.gpio = -1,
 	.i2c_clock_speed = 330000,
-	.timeout = 10000
+	.timeout = HZ,
 };
 
 /* PCA9564 I2C Bus driver */
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-common/ints-priority.c linux-libre-2.6.35-gnu/arch/blackfin/mach-common/ints-priority.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-common/ints-priority.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-common/ints-priority.c	2010-08-01 18:11:14.000000000 -0400
@@ -92,26 +92,29 @@
 {
 	unsigned ivg, irq_pos = 0;
 	for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
-		int irqn;
+		int irqN;
 
 		ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
 
-		for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
-			int iar_shift = (irqn & 7) * 4;
-				if (ivg == (0xf &
-#if defined(CONFIG_BF52x) || defined(CONFIG_BF538) \
-	|| defined(CONFIG_BF539) || defined(CONFIG_BF51x)
-			     bfin_read32((unsigned long *)SIC_IAR0 +
-					 ((irqn % 32) >> 3) + ((irqn / 32) *
-					 ((SIC_IAR4 - SIC_IAR0) / 4))) >> iar_shift)) {
+		for (irqN = 0; irqN < NR_PERI_INTS; irqN += 4) {
+			int irqn;
+			u32 iar = bfin_read32((unsigned long *)SIC_IAR0 +
+#if defined(CONFIG_BF51x) || defined(CONFIG_BF52x) || \
+	defined(CONFIG_BF538) || defined(CONFIG_BF539)
+				((irqN % 32) >> 3) + ((irqN / 32) * ((SIC_IAR4 - SIC_IAR0) / 4))
 #else
-			     bfin_read32((unsigned long *)SIC_IAR0 +
-					 (irqn >> 3)) >> iar_shift)) {
+				(irqN >> 3)
 #endif
-				ivg_table[irq_pos].irqno = IVG7 + irqn;
-				ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
-				ivg7_13[ivg].istop++;
-				irq_pos++;
+				);
+
+			for (irqn = irqN; irqn < irqN + 4; ++irqn) {
+				int iar_shift = (irqn & 7) * 4;
+				if (ivg == (0xf & (iar >> iar_shift))) {
+					ivg_table[irq_pos].irqno = IVG7 + irqn;
+					ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
+					ivg7_13[ivg].istop++;
+					irq_pos++;
+				}
 			}
 		}
 	}
@@ -662,14 +665,7 @@
 #ifdef CONFIG_PM
 int bfin_gpio_set_wake(unsigned int irq, unsigned int state)
 {
-	unsigned gpio = irq_to_gpio(irq);
-
-	if (state)
-		gpio_pm_wakeup_request(gpio, PM_WAKE_IGNORE);
-	else
-		gpio_pm_wakeup_free(gpio);
-
-	return 0;
+	return gpio_pm_wakeup_ctrl(irq_to_gpio(irq), state);
 }
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-common/pm.c linux-libre-2.6.35-gnu/arch/blackfin/mach-common/pm.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-common/pm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-common/pm.c	2010-08-01 18:11:14.000000000 -0400
@@ -20,35 +20,11 @@
 #include <asm/dma.h>
 #include <asm/dpmc.h>
 
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
-#define WAKEUP_TYPE	PM_WAKE_HIGH
-#endif
-
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_L
-#define WAKEUP_TYPE	PM_WAKE_LOW
-#endif
-
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_F
-#define WAKEUP_TYPE	PM_WAKE_FALLING
-#endif
-
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_R
-#define WAKEUP_TYPE	PM_WAKE_RISING
-#endif
-
-#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_EDGE_B
-#define WAKEUP_TYPE	PM_WAKE_BOTH_EDGES
-#endif
-
 
 void bfin_pm_suspend_standby_enter(void)
 {
 	unsigned long flags;
 
-#ifdef CONFIG_PM_WAKEUP_BY_GPIO
-	gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
-#endif
-
 	local_irq_save_hw(flags);
 	bfin_pm_standby_setup();
 
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mach-common/smp.c linux-libre-2.6.35-gnu/arch/blackfin/mach-common/smp.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mach-common/smp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mach-common/smp.c	2010-08-01 18:11:14.000000000 -0400
@@ -170,8 +170,8 @@
 			kfree(msg);
 			break;
 		default:
-			printk(KERN_CRIT "CPU%u: Unknown IPI message \
-			0x%lx\n", cpu, msg->type);
+			printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n",
+			       cpu, msg->type);
 			kfree(msg);
 			break;
 		}
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mm/init.c linux-libre-2.6.35-gnu/arch/blackfin/mm/init.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mm/init.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mm/init.c	2010-08-01 18:11:14.000000000 -0400
@@ -15,23 +15,11 @@
 #include "blackfin_sram.h"
 
 /*
- * BAD_PAGE is the page that is used for page faults when linux
- * is out-of-memory. Older versions of linux just did a
- * do_exit(), but using this instead means there is less risk
- * for a process dying in kernel mode, possibly leaving a inode
- * unused etc..
- *
- * BAD_PAGETABLE is the accompanying page-table: it is initialized
- * to point to BAD_PAGE entries.
- *
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
+ * ZERO_PAGE is a special page that is used for zero-initialized data and COW.
+ * Let the bss do its zero-init magic so we don't have to do it ourselves.
  */
-static unsigned long empty_bad_page_table;
-
-static unsigned long empty_bad_page;
-
-static unsigned long empty_zero_page;
+char empty_zero_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+EXPORT_SYMBOL(empty_zero_page);
 
 #ifndef CONFIG_EXCEPTION_L1_SCRATCH
 #if defined CONFIG_SYSCALL_TAB_L1
@@ -52,40 +40,26 @@
 void __init paging_init(void)
 {
 	/*
-	 * make sure start_mem is page aligned,  otherwise bootmem and
-	 * page_alloc get different views og the world
+	 * make sure start_mem is page aligned, otherwise bootmem and
+	 * page_alloc get different views of the world
 	 */
 	unsigned long end_mem = memory_end & PAGE_MASK;
 
-	pr_debug("start_mem is %#lx   virtual_end is %#lx\n", PAGE_ALIGN(memory_start), end_mem);
-
-	/*
-	 * initialize the bad page table and bad page to point
-	 * to a couple of allocated pages
-	 */
-	empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-	empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-	empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
-	memset((void *)empty_zero_page, 0, PAGE_SIZE);
+	unsigned long zones_size[MAX_NR_ZONES] = {
+		[0] = 0,
+		[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT,
+		[ZONE_NORMAL] = 0,
+#ifdef CONFIG_HIGHMEM
+		[ZONE_HIGHMEM] = 0,
+#endif
+	};
 
-	/*
-	 * Set up SFC/DFC registers (user data space)
-	 */
+	/* Set up SFC/DFC registers (user data space) */
 	set_fs(KERNEL_DS);
 
-	pr_debug("free_area_init -> start_mem is %#lx   virtual_end is %#lx\n",
+	pr_debug("free_area_init -> start_mem is %#lx virtual_end is %#lx\n",
 	        PAGE_ALIGN(memory_start), end_mem);
-
-	{
-		unsigned long zones_size[MAX_NR_ZONES] = { 0, };
-
-		zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
-		zones_size[ZONE_NORMAL] = 0;
-#ifdef CONFIG_HIGHMEM
-		zones_size[ZONE_HIGHMEM] = 0;
-#endif
-		free_area_init(zones_size);
-	}
+	free_area_init(zones_size);
 }
 
 asmlinkage void __init init_pda(void)
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mm/isram-driver.c linux-libre-2.6.35-gnu/arch/blackfin/mm/isram-driver.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mm/isram-driver.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mm/isram-driver.c	2010-08-01 18:11:14.000000000 -0400
@@ -43,13 +43,12 @@
 /* Takes a void pointer */
 #define IADDR2DTEST(x) \
 	({ unsigned long __addr = (unsigned long)(x); \
-		(__addr & 0x47F8)        | /* address bits 14 & 10:3 */ \
-		(__addr & 0x8000) << 23  | /* Bank A/B               */ \
-		(__addr & 0x0800) << 15  | /* address bit  11        */ \
-		(__addr & 0x3000) <<  4  | /* address bits 13:12     */ \
-		(__addr & 0x8000) <<  8  | /* address bit  15        */ \
-		(0x1000000)              | /* instruction access = 1 */ \
-		(0x4);                     /* data array = 1         */ \
+		((__addr & (1 << 11)) << (26 - 11)) | /* addr bit 11 (Way0/Way1)   */ \
+		(1 << 24)                           | /* instruction access = 1    */ \
+		((__addr & (1 << 15)) << (23 - 15)) | /* addr bit 15 (Data Bank)   */ \
+		((__addr & (3 << 12)) << (16 - 12)) | /* addr bits 13:12 (Subbank) */ \
+		(__addr & 0x47F8)                   | /* addr bits 14 & 10:3       */ \
+		(1 << 2);                             /* data array = 1            */ \
 	})
 
 /* Takes a pointer, and returns the offset (in bits) which things should be shifted */
@@ -196,7 +195,7 @@
 
 #ifdef CONFIG_BFIN_ISRAM_SELF_TEST
 
-#define TEST_LEN 0x100
+static int test_len = 0x20000;
 
 static __init void hex_dump(unsigned char *buf, int len)
 {
@@ -212,15 +211,15 @@
 	pr_info("INFO: running isram_read tests\n");
 
 	/* setup some different data to play with */
-	for (i = 0; i < TEST_LEN; ++i)
-		sdram[i] = i;
-	dma_memcpy(l1inst, sdram, TEST_LEN);
+	for (i = 0; i < test_len; ++i)
+		sdram[i] = i % 255;
+	dma_memcpy(l1inst, sdram, test_len);
 
 	/* make sure we can read the L1 inst */
-	for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
+	for (i = 0; i < test_len; i += sizeof(uint64_t)) {
 		data1 = isram_read(l1inst + i);
 		memcpy(&data2, sdram + i, sizeof(data2));
-		if (memcmp(&data1, &data2, sizeof(uint64_t))) {
+		if (data1 != data2) {
 			pr_err("FAIL: isram_read(%p) returned %#llx but wanted %#llx\n",
 				l1inst + i, data1, data2);
 			++ret;
@@ -238,25 +237,25 @@
 	pr_info("INFO: running isram_write tests\n");
 
 	/* setup some different data to play with */
-	memset(sdram, 0, TEST_LEN * 2);
-	dma_memcpy(l1inst, sdram, TEST_LEN);
-	for (i = 0; i < TEST_LEN; ++i)
-		sdram[i] = i;
+	memset(sdram, 0, test_len * 2);
+	dma_memcpy(l1inst, sdram, test_len);
+	for (i = 0; i < test_len; ++i)
+		sdram[i] = i % 255;
 
 	/* make sure we can write the L1 inst */
-	for (i = 0; i < TEST_LEN; i += sizeof(uint64_t)) {
+	for (i = 0; i < test_len; i += sizeof(uint64_t)) {
 		memcpy(&data1, sdram + i, sizeof(data1));
 		isram_write(l1inst + i, data1);
 		data2 = isram_read(l1inst + i);
-		if (memcmp(&data1, &data2, sizeof(uint64_t))) {
+		if (data1 != data2) {
 			pr_err("FAIL: isram_write(%p, %#llx) != %#llx\n",
 				l1inst + i, data1, data2);
 			++ret;
 		}
 	}
 
-	dma_memcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
-	if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
+	dma_memcpy(sdram + test_len, l1inst, test_len);
+	if (memcmp(sdram, sdram + test_len, test_len)) {
 		pr_err("FAIL: isram_write() did not work properly\n");
 		++ret;
 	}
@@ -268,12 +267,12 @@
 _isram_memcpy_test(char pattern, void *sdram, void *l1inst, const char *smemcpy,
                    void *(*fmemcpy)(void *, const void *, size_t))
 {
-	memset(sdram, pattern, TEST_LEN);
-	fmemcpy(l1inst, sdram, TEST_LEN);
-	fmemcpy(sdram + TEST_LEN, l1inst, TEST_LEN);
-	if (memcmp(sdram, sdram + TEST_LEN, TEST_LEN)) {
+	memset(sdram, pattern, test_len);
+	fmemcpy(l1inst, sdram, test_len);
+	fmemcpy(sdram + test_len, l1inst, test_len);
+	if (memcmp(sdram, sdram + test_len, test_len)) {
 		pr_err("FAIL: %s(%p <=> %p, %#x) failed (data is %#x)\n",
-			smemcpy, l1inst, sdram, TEST_LEN, pattern);
+			smemcpy, l1inst, sdram, test_len, pattern);
 		return 1;
 	}
 	return 0;
@@ -292,12 +291,13 @@
 	/* check read of small, unaligned, and hardware 64bit limits */
 	pr_info("INFO: running isram_memcpy (read) tests\n");
 
-	for (i = 0; i < TEST_LEN; ++i)
-		sdram[i] = i;
-	dma_memcpy(l1inst, sdram, TEST_LEN);
+	/* setup some different data to play with */
+	for (i = 0; i < test_len; ++i)
+		sdram[i] = i % 255;
+	dma_memcpy(l1inst, sdram, test_len);
 
 	thisret = 0;
-	for (i = 0; i < TEST_LEN - 32; ++i) {
+	for (i = 0; i < test_len - 32; ++i) {
 		unsigned char cmp[32];
 		for (j = 1; j <= 32; ++j) {
 			memset(cmp, 0, sizeof(cmp));
@@ -310,7 +310,7 @@
 				pr_cont("\n");
 				if (++thisret > 20) {
 					pr_err("FAIL: skipping remaining series\n");
-					i = TEST_LEN;
+					i = test_len;
 					break;
 				}
 			}
@@ -321,11 +321,11 @@
 	/* check write of small, unaligned, and hardware 64bit limits */
 	pr_info("INFO: running isram_memcpy (write) tests\n");
 
-	memset(sdram + TEST_LEN, 0, TEST_LEN);
-	dma_memcpy(l1inst, sdram + TEST_LEN, TEST_LEN);
+	memset(sdram + test_len, 0, test_len);
+	dma_memcpy(l1inst, sdram + test_len, test_len);
 
 	thisret = 0;
-	for (i = 0; i < TEST_LEN - 32; ++i) {
+	for (i = 0; i < test_len - 32; ++i) {
 		unsigned char cmp[32];
 		for (j = 1; j <= 32; ++j) {
 			isram_memcpy(l1inst + i, sdram + i, j);
@@ -338,7 +338,7 @@
 				pr_cont("\n");
 				if (++thisret > 20) {
 					pr_err("FAIL: skipping remaining series\n");
-					i = TEST_LEN;
+					i = test_len;
 					break;
 				}
 			}
@@ -355,22 +355,30 @@
 	char *sdram;
 	void *l1inst;
 
-	sdram = kmalloc(TEST_LEN * 2, GFP_KERNEL);
-	if (!sdram) {
-		pr_warning("SKIP: could not allocate sdram\n");
-		return 0;
+	/* Try to test as much of L1SRAM as possible */
+	while (test_len) {
+		test_len >>= 1;
+		l1inst = l1_inst_sram_alloc(test_len);
+		if (l1inst)
+			break;
 	}
-
-	l1inst = l1_inst_sram_alloc(TEST_LEN);
 	if (!l1inst) {
-		kfree(sdram);
 		pr_warning("SKIP: could not allocate L1 inst\n");
 		return 0;
 	}
+	pr_info("INFO: testing %#x bytes (%p - %p)\n",
+	        test_len, l1inst, l1inst + test_len);
+
+	sdram = kmalloc(test_len * 2, GFP_KERNEL);
+	if (!sdram) {
+		sram_free(l1inst);
+		pr_warning("SKIP: could not allocate sdram\n");
+		return 0;
+	}
 
 	/* sanity check initial L1 inst state */
 	ret = 1;
-	pr_info("INFO: running initial dma_memcpy checks\n");
+	pr_info("INFO: running initial dma_memcpy checks %p\n", sdram);
 	if (_isram_memcpy_test(0xa, sdram, l1inst, dma_memcpy))
 		goto abort;
 	if (_isram_memcpy_test(0x5, sdram, l1inst, dma_memcpy))
diff -druN linux-libre-2.6.34-gnu/arch/blackfin/mm/sram-alloc.c linux-libre-2.6.35-gnu/arch/blackfin/mm/sram-alloc.c
--- linux-libre-2.6.34-gnu/arch/blackfin/mm/sram-alloc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/blackfin/mm/sram-alloc.c	2010-08-01 18:11:14.000000000 -0400
@@ -256,7 +256,8 @@
 		plast->next = pslot->next;
 		pavail = pslot;
 	} else {
-		pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+		/* use atomic so our L1 allocator can be used atomically */
+		pavail = kmem_cache_alloc(sram_piece_cache, GFP_ATOMIC);
 
 		if (!pavail)
 			return NULL;
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v10/drivers/ds1302.c linux-libre-2.6.35-gnu/arch/cris/arch-v10/drivers/ds1302.c
--- linux-libre-2.6.34-gnu/arch/cris/arch-v10/drivers/ds1302.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v10/drivers/ds1302.c	2010-08-01 18:11:14.000000000 -0400
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/miscdevice.h>
 #include <linux/delay.h>
+#include <linux/smp_lock.h>
 #include <linux/bcd.h>
 #include <linux/capability.h>
 
@@ -238,9 +239,7 @@
 
 /* ioctl that supports RTC_RD_TIME and RTC_SET_TIME (read and set time/date). */
 
-static int
-rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	  unsigned long arg) 
+static int rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	unsigned long flags;
 
@@ -354,6 +353,17 @@
 	}
 }
 
+static long rtc_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int ret;
+
+	lock_kernel();
+	ret = rtc_ioctl(file, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static void
 print_rtc_status(void)
 {
@@ -375,8 +385,8 @@
 /* The various file operations we support. */
 
 static const struct file_operations rtc_fops = {
-	.owner =	THIS_MODULE,
-	.ioctl =	rtc_ioctl,
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl = rtc_unlocked_ioctl,
 }; 
 
 /* Probe for the chip by writing something to its RAM and try reading it back. */
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v10/drivers/eeprom.c linux-libre-2.6.35-gnu/arch/cris/arch-v10/drivers/eeprom.c
--- linux-libre-2.6.34-gnu/arch/cris/arch-v10/drivers/eeprom.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v10/drivers/eeprom.c	2010-08-01 18:11:14.000000000 -0400
@@ -73,8 +73,7 @@
   int adapt_state; /* 1 = To high , 0 = Even, -1 = To low */
   
   /* this one is to keep the read/write operations atomic */
-  wait_queue_head_t wait_q;
-  volatile int busy;
+  struct mutex lock;
   int retry_cnt_addr; /* Used to keep track of number of retries for
                          adaptive timing adjustments */
   int retry_cnt_read;
@@ -115,8 +114,7 @@
 
 int __init eeprom_init(void)
 {
-  init_waitqueue_head(&eeprom.wait_q);
-  eeprom.busy = 0;
+  mutex_init(&eeprom.lock);
 
 #ifdef CONFIG_ETRAX_I2C_EEPROM_PROBE
 #define EETEXT "Found"
@@ -439,10 +437,7 @@
 
 static int eeprom_read_buf(loff_t addr, char * buf, int count)
 {
-  struct file f;
-
-  f.f_pos = addr;
-  return eeprom_read(&f, buf, count, &addr);
+  return eeprom_read(NULL, buf, count, &addr);
 }
 
 
@@ -452,7 +447,7 @@
 static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t *off)
 {
   int read=0;
-  unsigned long p = file->f_pos;
+  unsigned long p = *off;
 
   unsigned char page;
 
@@ -461,12 +456,9 @@
     return -EFAULT;
   }
   
-  wait_event_interruptible(eeprom.wait_q, !eeprom.busy);
-  if (signal_pending(current))
+  if (mutex_lock_interruptible(&eeprom.lock))
     return -EINTR;
 
-  eeprom.busy++;
-
   page = (unsigned char) (p >> 8);
   
   if(!eeprom_address(p))
@@ -476,8 +468,7 @@
     i2c_stop();
     
     /* don't forget to wake them up */
-    eeprom.busy--;
-    wake_up_interruptible(&eeprom.wait_q);  
+    mutex_unlock(&eeprom.lock);
     return -EFAULT;
   }
 
@@ -501,11 +492,10 @@
   
   if(read > 0)
   {
-    file->f_pos += read;
+    *off += read;
   }
 
-  eeprom.busy--;
-  wake_up_interruptible(&eeprom.wait_q);
+  mutex_unlock(&eeprom.lock);
   return read;
 }
 
@@ -513,11 +503,7 @@
 
 static int eeprom_write_buf(loff_t addr, const char * buf, int count)
 {
-  struct file f;
-
-  f.f_pos = addr;
-  
-  return eeprom_write(&f, buf, count, &addr);
+  return eeprom_write(NULL, buf, count, &addr);
 }
 
 
@@ -534,16 +520,14 @@
     return -EFAULT;
   }
 
-  wait_event_interruptible(eeprom.wait_q, !eeprom.busy);
   /* bail out if we get interrupted */
-  if (signal_pending(current))
+  if (mutex_lock_interruptible(&eeprom.lock))
     return -EINTR;
-  eeprom.busy++;
   for(i = 0; (i < EEPROM_RETRIES) && (restart > 0); i++)
   {
     restart = 0;
     written = 0;
-    p = file->f_pos;
+    p = *off;
    
     
     while( (written < count) && (p < eeprom.size))
@@ -556,8 +540,7 @@
         i2c_stop();
         
         /* don't forget to wake them up */
-        eeprom.busy--;
-        wake_up_interruptible(&eeprom.wait_q);
+        mutex_unlock(&eeprom.lock);
         return -EFAULT;
       }
 #ifdef EEPROM_ADAPTIVE_TIMING      
@@ -669,12 +652,11 @@
     } /* while */
   } /* for  */
 
-  eeprom.busy--;
-  wake_up_interruptible(&eeprom.wait_q);
-  if (written == 0 && file->f_pos >= eeprom.size){
+  mutex_unlock(&eeprom.lock);
+  if (written == 0 && p >= eeprom.size){
     return -ENOSPC;
   }
-  file->f_pos += written;
+  *off = p;
   return written;
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v10/drivers/pcf8563.c linux-libre-2.6.35-gnu/arch/cris/arch-v10/drivers/pcf8563.c
--- linux-libre-2.6.34-gnu/arch/cris/arch-v10/drivers/pcf8563.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v10/drivers/pcf8563.c	2010-08-01 18:11:14.000000000 -0400
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 #include <linux/bcd.h>
 #include <linux/mutex.h>
+#include <linux/smp_lock.h>
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
@@ -53,7 +54,7 @@
 static const unsigned char days_in_month[] =
 	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
 
-int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+static long pcf8563_unlocked_ioctl(struct file *, unsigned int, unsigned long);
 
 /* Cache VL bit value read at driver init since writing the RTC_SECOND
  * register clears the VL status.
@@ -62,7 +63,7 @@
 
 static const struct file_operations pcf8563_fops = {
 	.owner = THIS_MODULE,
-	.ioctl = pcf8563_ioctl,
+	.unlocked_ioctl = pcf8563_unlocked_ioctl,
 };
 
 unsigned char
@@ -212,8 +213,7 @@
  * ioctl calls for this driver. Why return -ENOTTY upon error? Because
  * POSIX says so!
  */
-int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-	unsigned long arg)
+static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	/* Some sanity checks. */
 	if (_IOC_TYPE(cmd) != RTC_MAGIC)
@@ -339,6 +339,17 @@
 	return 0;
 }
 
+static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	int ret;
+
+	lock_kernel();
+	return pcf8563_ioctl(filp, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static int __init pcf8563_register(void)
 {
 	if (pcf8563_init() < 0) {
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v10/kernel/irq.c linux-libre-2.6.35-gnu/arch/cris/arch-v10/kernel/irq.c
--- linux-libre-2.6.34-gnu/arch/cris/arch-v10/kernel/irq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v10/kernel/irq.c	2010-08-01 18:11:14.000000000 -0400
@@ -17,8 +17,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
-#define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
+#define crisv10_mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
+#define crisv10_unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
 
 /* don't use set_int_vector, it bypasses the linux interrupt handlers. it is
  * global just so that the kernel gdb can use it.
@@ -116,12 +116,12 @@
 
 static void enable_crisv10_irq(unsigned int irq)
 {
-	unmask_irq(irq);
+	crisv10_unmask_irq(irq);
 }
 
 static void disable_crisv10_irq(unsigned int irq)
 {
-	mask_irq(irq);
+	crisv10_mask_irq(irq);
 }
 
 static void ack_crisv10_irq(unsigned int irq)
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v10/kernel/time.c linux-libre-2.6.35-gnu/arch/cris/arch-v10/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/cris/arch-v10/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v10/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -26,7 +26,6 @@
 /* it will make jiffies at 96 hz instead of 100 hz though */
 #undef USE_CASCADE_TIMERS
 
-extern void update_xtime_from_cmos(void);
 extern int set_rtc_mmss(unsigned long nowtime);
 extern int have_rtc;
 
@@ -188,8 +187,6 @@
 #endif	
 }
 
-/* last time the cmos clock got updated */
-static long last_rtc_update = 0;
 
 /*
  * timer_interrupt() needs to keep up the real-time clock,
@@ -232,24 +229,6 @@
 	do_timer(1);
 	
         cris_do_profile(regs); /* Save profiling information */
-
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 *
-	 * The division here is not time critical since it will run once in 
-	 * 11 minutes
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
         return IRQ_HANDLED;
 }
 
@@ -274,22 +253,10 @@
 	 */
 	loops_per_usec = 50;
 
-	if(RTC_INIT() < 0) {
-		/* no RTC, start at 1980 */
-		xtime.tv_sec = 0;
-		xtime.tv_nsec = 0;
+	if(RTC_INIT() < 0)
 		have_rtc = 0;
-	} else {		
-		/* get the current time */
+	else
 		have_rtc = 1;
-		update_xtime_from_cmos();
-	}
-
-	/*
-	 * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the
-	 * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC).
-	 */
-	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
 
 	/* Setup the etrax timers
 	 * Base frequency is 25000 hz, divider 250 -> 100 HZ
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v10/lib/dmacopy.c linux-libre-2.6.35-gnu/arch/cris/arch-v10/lib/dmacopy.c
--- linux-libre-2.6.34-gnu/arch/cris/arch-v10/lib/dmacopy.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v10/lib/dmacopy.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,5 +1,4 @@
-/* $Id: dmacopy.c,v 1.1 2001/12/17 13:59:27 bjornw Exp $ 
- *
+/*
  * memcpy for large blocks, using memory-memory DMA channels 6 and 7 in Etrax
  */
 
@@ -13,11 +12,11 @@
 		 unsigned int pn)
 {
 	static etrax_dma_descr indma, outdma;
-	
-	D(printk("dma_memcpy %d bytes... ", pn));
+
+	D(printk(KERN_DEBUG "dma_memcpy %d bytes... ", pn));
 
 #if 0
-	*R_GEN_CONFIG = genconfig_shadow = 
+	*R_GEN_CONFIG = genconfig_shadow =
 		(genconfig_shadow & ~0x3c0000) |
 		IO_STATE(R_GEN_CONFIG, dma6, intdma7) |
 		IO_STATE(R_GEN_CONFIG, dma7, intdma6);
@@ -32,11 +31,11 @@
 	*R_DMA_CH7_FIRST = &outdma;
 	*R_DMA_CH6_CMD = IO_STATE(R_DMA_CH6_CMD, cmd, start);
 	*R_DMA_CH7_CMD = IO_STATE(R_DMA_CH7_CMD, cmd, start);
-	
-	while(*R_DMA_CH7_CMD == 1) /* wait for completion */ ;
 
-	D(printk("done\n"));
+	while (*R_DMA_CH7_CMD == 1)
+		/* wait for completion */;
 
+	D(printk(KERN_DEBUG "done\n"));
 }
 
 
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v10/lib/hw_settings.S linux-libre-2.6.35-gnu/arch/cris/arch-v10/lib/hw_settings.S
--- linux-libre-2.6.34-gnu/arch/cris/arch-v10/lib/hw_settings.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v10/lib/hw_settings.S	2010-08-01 18:11:14.000000000 -0400
@@ -1,13 +1,11 @@
 /*
- * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
- * 
  * This table is used by some tools to extract hardware parameters.
  * The table should be included in the kernel and the decompressor.
  * Don't forget to update the tools if you change this table.
  *
  * Copyright (C) 2001 Axis Communications AB
  *
- * Authors:  Mikael Starvik (starvik@axis.com)	
+ * Authors:  Mikael Starvik (starvik@axis.com)
  */
 
 #define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
@@ -15,13 +13,13 @@
 #define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
 		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
 		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
-	
+
 	.ascii "HW_PARAM_MAGIC" ; Magic number
 	.dword 0xc0004000	; Kernel start address
 
 	; Debug port
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
-	.dword 0		
+	.dword 0
 #elif defined(CONFIG_ETRAX_DEBUG_PORT1)
 	.dword 1
 #elif defined(CONFIG_ETRAX_DEBUG_PORT2)
@@ -30,7 +28,7 @@
 	.dword 3
 #else
 	.dword 4 ; No debug
-#endif			
+#endif
 
 	; SDRAM or EDO DRAM?
 #ifdef CONFIG_ETRAX_SDRAM
@@ -39,7 +37,7 @@
 	.dword 0
 #endif
 
-	; Register values 
+	; Register values
 	.dword R_WAITSTATES
 	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
 	.dword R_BUS_CONFIG
@@ -56,7 +54,7 @@
 	.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
 #endif
 	.dword R_PORT_PA_SET
-	.dword PA_SET_VALUE 
+	.dword PA_SET_VALUE
 	.dword R_PORT_PB_SET
 	.dword PB_SET_VALUE
 	.dword 0 ; No more register values
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v32/drivers/i2c.c linux-libre-2.6.35-gnu/arch/cris/arch-v32/drivers/i2c.c
--- linux-libre-2.6.34-gnu/arch/cris/arch-v32/drivers/i2c.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v32/drivers/i2c.c	2010-08-01 18:11:14.000000000 -0400
@@ -649,10 +649,10 @@
 /* Main device API. ioctl's to write or read to/from i2c registers.
  */
 
-static int
-i2c_ioctl(struct inode *inode, struct file *file,
-	  unsigned int cmd, unsigned long arg)
+static long
+i2c_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
+	int ret;
 	if(_IOC_TYPE(cmd) != ETRAXI2C_IOCTYPE) {
 		return -ENOTTY;
 	}
@@ -665,9 +665,13 @@
 				 I2C_ARGREG(arg),
 				 I2C_ARGVALUE(arg)));
 
-			return i2c_writereg(I2C_ARGSLAVE(arg),
+			lock_kernel();
+			ret = i2c_writereg(I2C_ARGSLAVE(arg),
 					    I2C_ARGREG(arg),
 					    I2C_ARGVALUE(arg));
+			unlock_kernel();
+			return ret;
+
 		case I2C_READREG:
 		{
 			unsigned char val;
@@ -675,7 +679,9 @@
 			D(printk("i2cr %d %d ",
 				I2C_ARGSLAVE(arg),
 				I2C_ARGREG(arg)));
+			lock_kernel();
 			val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
+			unlock_kernel();
 			D(printk("= %d\n", val));
 			return val;
 		}
@@ -688,10 +694,10 @@
 }
 
 static const struct file_operations i2c_fops = {
-	.owner =    THIS_MODULE,
-	.ioctl =    i2c_ioctl,
-	.open =     i2c_open,
-	.release =  i2c_release,
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl = i2c_ioctl,
+	.open		= i2c_open,
+	.release	= i2c_release,
 };
 
 static int __init i2c_init(void)
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v32/drivers/Kconfig linux-libre-2.6.35-gnu/arch/cris/arch-v32/drivers/Kconfig
--- linux-libre-2.6.34-gnu/arch/cris/arch-v32/drivers/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v32/drivers/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -360,24 +360,10 @@
 	string "Ser 4 DSR bit (empty = not used)"
 	depends on ETRAX_SERIAL_PORT4
 
-config ETRAX_SER3_CD_BIT
+config ETRAX_SER4_CD_BIT
 	string "Ser 4 CD bit (empty = not used)"
 	depends on ETRAX_SERIAL_PORT4
 
-config ETRAX_RS485
-	bool "RS-485 support"
-	depends on ETRAXFS_SERIAL
-	help
-	  Enables support for RS-485 serial communication.  For a primer on
-	  RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
-
-config ETRAX_RS485_DISABLE_RECEIVER
-	bool "Disable serial receiver"
-	depends on ETRAX_RS485
-	help
-	  It is necessary to disable the serial receiver to avoid serial
-	  loopback.  Not all products are able to do this in software only.
-
 config ETRAX_SYNCHRONOUS_SERIAL
 	bool "Synchronous serial-port support"
 	depends on ETRAX_ARCH_V32
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v32/drivers/pcf8563.c linux-libre-2.6.35-gnu/arch/cris/arch-v32/drivers/pcf8563.c
--- linux-libre-2.6.34-gnu/arch/cris/arch-v32/drivers/pcf8563.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v32/drivers/pcf8563.c	2010-08-01 18:11:14.000000000 -0400
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/ioctl.h>
+#include <linux/smp_lock.h>
 #include <linux/delay.h>
 #include <linux/bcd.h>
 #include <linux/mutex.h>
@@ -49,7 +50,7 @@
 static const unsigned char days_in_month[] =
 	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
 
-int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
 
 /* Cache VL bit value read at driver init since writing the RTC_SECOND
  * register clears the VL status.
@@ -57,8 +58,8 @@
 static int voltage_low;
 
 static const struct file_operations pcf8563_fops = {
-	.owner =	THIS_MODULE,
-	.ioctl =	pcf8563_ioctl
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl = pcf8563_unlocked_ioctl,
 };
 
 unsigned char
@@ -208,8 +209,7 @@
  * ioctl calls for this driver. Why return -ENOTTY upon error? Because
  * POSIX says so!
  */
-int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-	unsigned long arg)
+static int pcf8563_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
 	/* Some sanity checks. */
 	if (_IOC_TYPE(cmd) != RTC_MAGIC)
@@ -335,6 +335,17 @@
 	return 0;
 }
 
+static long pcf8563_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	int ret;
+
+	lock_kernel();
+	return pcf8563_ioctl(filp, cmd, arg);
+	unlock_kernel();
+
+	return ret;
+}
+
 static int __init pcf8563_register(void)
 {
 	if (pcf8563_init() < 0) {
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v32/kernel/crisksyms.c linux-libre-2.6.35-gnu/arch/cris/arch-v32/kernel/crisksyms.c
--- linux-libre-2.6.34-gnu/arch/cris/arch-v32/kernel/crisksyms.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v32/kernel/crisksyms.c	2010-08-01 18:11:14.000000000 -0400
@@ -24,5 +24,5 @@
 EXPORT_SYMBOL(crisv32_io_get);
 
 /* Functions masking/unmasking interrupts */
-EXPORT_SYMBOL(mask_irq);
-EXPORT_SYMBOL(unmask_irq);
+EXPORT_SYMBOL(crisv32_mask_irq);
+EXPORT_SYMBOL(crisv32_unmask_irq);
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v32/kernel/irq.c linux-libre-2.6.35-gnu/arch/cris/arch-v32/kernel/irq.c
--- linux-libre-2.6.34-gnu/arch/cris/arch-v32/kernel/irq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v32/kernel/irq.c	2010-08-01 18:11:14.000000000 -0400
@@ -280,8 +280,7 @@
 	return cpu;
 }
 
-void
-mask_irq(int irq)
+void crisv32_mask_irq(int irq)
 {
 	int cpu;
 
@@ -289,8 +288,7 @@
 		block_irq(irq, cpu);
 }
 
-void
-unmask_irq(int irq)
+void crisv32_unmask_irq(int irq)
 {
 	unblock_irq(irq, irq_cpu(irq));
 }
@@ -298,23 +296,23 @@
 
 static unsigned int startup_crisv32_irq(unsigned int irq)
 {
-	unmask_irq(irq);
+	crisv32_unmask_irq(irq);
 	return 0;
 }
 
 static void shutdown_crisv32_irq(unsigned int irq)
 {
-	mask_irq(irq);
+	crisv32_mask_irq(irq);
 }
 
 static void enable_crisv32_irq(unsigned int irq)
 {
-	unmask_irq(irq);
+	crisv32_unmask_irq(irq);
 }
 
 static void disable_crisv32_irq(unsigned int irq)
 {
-	mask_irq(irq);
+	crisv32_mask_irq(irq);
 }
 
 static void ack_crisv32_irq(unsigned int irq)
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v32/kernel/smp.c linux-libre-2.6.35-gnu/arch/cris/arch-v32/kernel/smp.c
--- linux-libre-2.6.34-gnu/arch/cris/arch-v32/kernel/smp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v32/kernel/smp.c	2010-08-01 18:11:14.000000000 -0400
@@ -168,8 +168,8 @@
 
 	/* Enable IRQ and idle */
 	REG_WR(intr_vect, irq_regs[cpu], rw_mask, vect_mask);
-	unmask_irq(IPI_INTR_VECT);
-	unmask_irq(TIMER0_INTR_VECT);
+	crisv32_unmask_irq(IPI_INTR_VECT);
+	crisv32_unmask_irq(TIMER0_INTR_VECT);
 	preempt_disable();
 	notify_cpu_starting(cpu);
 	local_irq_enable();
diff -druN linux-libre-2.6.34-gnu/arch/cris/arch-v32/kernel/time.c linux-libre-2.6.35-gnu/arch/cris/arch-v32/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/cris/arch-v32/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/arch-v32/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -44,7 +44,6 @@
 #endif
 };
 
-extern void update_xtime_from_cmos(void);
 extern int set_rtc_mmss(unsigned long nowtime);
 extern int have_rtc;
 
@@ -198,9 +197,6 @@
 #endif
 }
 
-/* Last time the cmos clock got updated. */
-static long last_rtc_update = 0;
-
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick.
@@ -238,25 +234,6 @@
 
 	/* Call the real timer interrupt handler */
 	do_timer(1);
-
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 *
-	 * The division here is not time critical since it will run once in
-	 * 11 minutes
-	 */
-	if ((time_status & STA_UNSYNC) == 0 &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			/* Do it again in 60 s */
-			last_rtc_update = xtime.tv_sec - 600;
-	}
         return IRQ_HANDLED;
 }
 
@@ -309,23 +286,10 @@
 	 */
 	loops_per_usec = 50;
 
-	if(RTC_INIT() < 0) {
-		/* No RTC, start at 1980 */
-		xtime.tv_sec = 0;
-		xtime.tv_nsec = 0;
+	if(RTC_INIT() < 0)
 		have_rtc = 0;
-	} else {
-		/* Get the current time */
+	else
 		have_rtc = 1;
-		update_xtime_from_cmos();
-	}
-
-	/*
-	 * Initialize wall_to_monotonic such that adding it to
-	 * xtime will yield zero, the tv_nsec field must be normalized
-	 * (i.e., 0 <= nsec < NSEC_PER_SEC).
-	 */
-	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
 
 	/* Start CPU local timer. */
 	cris_timer_init();
diff -druN linux-libre-2.6.34-gnu/arch/cris/include/arch-v10/arch/irq.h linux-libre-2.6.35-gnu/arch/cris/include/arch-v10/arch/irq.h
--- linux-libre-2.6.34-gnu/arch/cris/include/arch-v10/arch/irq.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/include/arch-v10/arch/irq.h	2010-08-01 18:11:14.000000000 -0400
@@ -93,15 +93,16 @@
   "push $r10\n\t"       /* push orig_r10 */ \
   "clear.d [$sp=$sp-4]\n\t"  /* frametype - this is a normal stackframe */
 
-  /* BLOCK_IRQ and UNBLOCK_IRQ do the same as mask_irq and unmask_irq */
+/* BLOCK_IRQ and UNBLOCK_IRQ do the same as
+ * crisv10_mask_irq and crisv10_unmask_irq */
 
 #define BLOCK_IRQ(mask,nr) \
   "move.d " #mask ",$r0\n\t" \
-  "move.d $r0,[0xb00000d8]\n\t" 
-  
+  "move.d $r0,[0xb00000d8]\n\t"
+
 #define UNBLOCK_IRQ(mask) \
   "move.d " #mask ",$r0\n\t" \
-  "move.d $r0,[0xb00000dc]\n\t" 
+  "move.d $r0,[0xb00000dc]\n\t"
 
 #define IRQ_NAME2(nr) nr##_interrupt(void)
 #define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
diff -druN linux-libre-2.6.34-gnu/arch/cris/include/arch-v32/arch/irq.h linux-libre-2.6.35-gnu/arch/cris/include/arch-v32/arch/irq.h
--- linux-libre-2.6.34-gnu/arch/cris/include/arch-v32/arch/irq.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/include/arch-v32/arch/irq.h	2010-08-01 18:11:14.000000000 -0400
@@ -23,8 +23,8 @@
 
 extern struct etrax_interrupt_vector *etrax_irv;	/* head.S */
 
-void mask_irq(int irq);
-void unmask_irq(int irq);
+void crisv32_mask_irq(int irq);
+void crisv32_unmask_irq(int irq);
 
 void set_exception_vector(int n, irqvectptr addr);
 
diff -druN linux-libre-2.6.34-gnu/arch/cris/include/asm/atomic.h linux-libre-2.6.35-gnu/arch/cris/include/asm/atomic.h
--- linux-libre-2.6.34-gnu/arch/cris/include/asm/atomic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/include/asm/atomic.h	2010-08-01 18:11:14.000000000 -0400
@@ -15,7 +15,7 @@
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#define atomic_read(v) ((v)->counter)
+#define atomic_read(v) (*(volatile int *)&(v)->counter)
 #define atomic_set(v,i) (((v)->counter) = (i))
 
 /* These should be written in asm but we do it in C for now. */
diff -druN linux-libre-2.6.34-gnu/arch/cris/include/asm/param.h linux-libre-2.6.35-gnu/arch/cris/include/asm/param.h
--- linux-libre-2.6.34-gnu/arch/cris/include/asm/param.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/include/asm/param.h	2010-08-01 18:11:14.000000000 -0400
@@ -2,22 +2,9 @@
 #define _ASMCRIS_PARAM_H
 
 /* Currently we assume that HZ=100 is good for CRIS. */
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
 
 #define EXEC_PAGESIZE	8192
 
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#include <asm-generic/param.h>
 
-#endif
+#endif /* _ASMCRIS_PARAM_H */
diff -druN linux-libre-2.6.34-gnu/arch/cris/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/cris/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/cris/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,22 +1,7 @@
 #ifndef __ASM_CRIS_SCATTERLIST_H
 #define __ASM_CRIS_SCATTERLIST_H
 
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	char *  address;    /* Location data is to be transferred to */
-	unsigned int length;
-
-	/* The following is i386 highmem junk - not used by us */
-	unsigned long page_link;
-	unsigned int offset;/* for highmem, page offset */
-
-};
-
-#define sg_dma_address(sg)	((sg)->address)
-#define sg_dma_len(sg)		((sg)->length)
-/* i386 junk */
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (0x1fffffff)
 
diff -druN linux-libre-2.6.34-gnu/arch/cris/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/cris/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/cris/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -85,7 +85,7 @@
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		17
+#define TIF_MEMDIE		17	/* is terminating due to OOM killer */
 #define TIF_FREEZE		18	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
diff -druN linux-libre-2.6.34-gnu/arch/cris/Kconfig linux-libre-2.6.35-gnu/arch/cris/Kconfig
--- linux-libre-2.6.34-gnu/arch/cris/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -23,6 +23,9 @@
 config GENERIC_TIME
 	def_bool y
 
+config GENERIC_CMOS_UPDATE
+	def_bool y
+
 config ARCH_USES_GETTIMEOFFSET
 	def_bool y
 
diff -druN linux-libre-2.6.34-gnu/arch/cris/kernel/time.c linux-libre-2.6.35-gnu/arch/cris/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/cris/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/cris/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -98,6 +98,8 @@
 get_cmos_time(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
+	if(!have_rtc)
+		return 0;
 
 	sec = CMOS_READ(RTC_SECONDS);
 	min = CMOS_READ(RTC_MINUTES);
@@ -119,19 +121,19 @@
 	return mktime(year, mon, day, hour, min, sec);
 }
 
-/* update xtime from the CMOS settings. used when /dev/rtc gets a SET_TIME.
- * TODO: this doesn't reset the fancy NTP phase stuff as do_settimeofday does.
- */
 
-void
-update_xtime_from_cmos(void)
+int update_persistent_clock(struct timespec now)
 {
-	if(have_rtc) {
-		xtime.tv_sec = get_cmos_time();
-		xtime.tv_nsec = 0;
-	}
+	return set_rtc_mmss(now.tv_sec);
+}
+
+void read_persistent_clock(struct timespec *ts)
+{
+	ts->tv_sec = get_cmos_time();
+	ts->tv_nsec = 0;
 }
 
+
 extern void cris_profile_sample(struct pt_regs* regs);
 
 void
diff -druN linux-libre-2.6.34-gnu/arch/frv/include/asm/atomic.h linux-libre-2.6.35-gnu/arch/frv/include/asm/atomic.h
--- linux-libre-2.6.34-gnu/arch/frv/include/asm/atomic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/include/asm/atomic.h	2010-08-01 18:11:14.000000000 -0400
@@ -36,7 +36,7 @@
 #define smp_mb__after_atomic_inc()	barrier()
 
 #define ATOMIC_INIT(i)		{ (i) }
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = (i))
 
 #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
diff -druN linux-libre-2.6.34-gnu/arch/frv/include/asm/gdb-stub.h linux-libre-2.6.35-gnu/arch/frv/include/asm/gdb-stub.h
--- linux-libre-2.6.34-gnu/arch/frv/include/asm/gdb-stub.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/include/asm/gdb-stub.h	2010-08-01 18:11:14.000000000 -0400
@@ -12,6 +12,7 @@
 #ifndef __ASM_GDB_STUB_H
 #define __ASM_GDB_STUB_H
 
+#undef GDBSTUB_DEBUG_IO
 #undef GDBSTUB_DEBUG_PROTOCOL
 
 #include <asm/ptrace.h>
@@ -108,6 +109,12 @@
 extern void debug_to_serial(const char *p, int n);
 extern void console_set_baud(unsigned baud);
 
+#ifdef GDBSTUB_DEBUG_IO
+#define gdbstub_io(FMT,...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_io(FMT,...) ({ 0; })
+#endif
+
 #ifdef GDBSTUB_DEBUG_PROTOCOL
 #define gdbstub_proto(FMT,...) gdbstub_printk(FMT,##__VA_ARGS__)
 #else
diff -druN linux-libre-2.6.34-gnu/arch/frv/include/asm/mem-layout.h linux-libre-2.6.35-gnu/arch/frv/include/asm/mem-layout.h
--- linux-libre-2.6.34-gnu/arch/frv/include/asm/mem-layout.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/include/asm/mem-layout.h	2010-08-01 18:11:14.000000000 -0400
@@ -35,8 +35,8 @@
  * the slab must be aligned such that load- and store-double instructions don't
  * fault if used
  */
-#define	ARCH_KMALLOC_MINALIGN		8
-#define	ARCH_SLAB_MINALIGN		8
+#define	ARCH_KMALLOC_MINALIGN		L1_CACHE_BYTES
+#define	ARCH_SLAB_MINALIGN		L1_CACHE_BYTES
 
 /*****************************************************************************/
 /*
diff -druN linux-libre-2.6.34-gnu/arch/frv/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/frv/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/frv/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,45 +1,7 @@
 #ifndef _ASM_SCATTERLIST_H
 #define _ASM_SCATTERLIST_H
 
-#include <asm/types.h>
-
-/*
- * Drivers must set either ->address or (preferred) page and ->offset
- * to indicate where data must be transferred to/from.
- *
- * Using page is recommended since it handles highmem data as well as
- * low mem. ->address is restricted to data which has a virtual mapping, and
- * it will go away in the future. Updating to page can be automated very
- * easily -- something like
- *
- * sg->address = some_ptr;
- *
- * can be rewritten as
- *
- * sg_set_buf(sg, some_ptr, length);
- *
- * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
- */
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;		/* for highmem, page offset */
-
-	dma_addr_t	dma_address;
-	unsigned int	length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (0xffffffffUL)
 
diff -druN linux-libre-2.6.34-gnu/arch/frv/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/frv/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/frv/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -113,7 +113,7 @@
 #define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		17	/* OOM killer killed process */
+#define TIF_MEMDIE		17	/* is terminating due to OOM killer */
 #define TIF_FREEZE		18	/* freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
diff -druN linux-libre-2.6.34-gnu/arch/frv/kernel/break.S linux-libre-2.6.35-gnu/arch/frv/kernel/break.S
--- linux-libre-2.6.34-gnu/arch/frv/kernel/break.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/kernel/break.S	2010-08-01 18:11:14.000000000 -0400
@@ -21,7 +21,7 @@
 #
 # the break handler has its own stack
 #
-	.section	.bss.stack
+	.section	.bss..stack
 	.globl		__break_user_context
 	.balign		THREAD_SIZE
 __break_stack:
@@ -63,7 +63,7 @@
 # entry point for Break Exceptions/Interrupts
 #
 ###############################################################################
-	.section	.text.break
+	.section	.text..break
 	.balign		4
 	.globl		__entry_break
 __entry_break:
diff -druN linux-libre-2.6.34-gnu/arch/frv/kernel/entry.S linux-libre-2.6.35-gnu/arch/frv/kernel/entry.S
--- linux-libre-2.6.34-gnu/arch/frv/kernel/entry.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/kernel/entry.S	2010-08-01 18:11:14.000000000 -0400
@@ -38,7 +38,7 @@
 
 #define nr_syscalls ((syscall_table_size)/4)
 
-	.section	.text.entry
+	.section	.text..entry
 	.balign		4
 
 .macro LEDS val
diff -druN linux-libre-2.6.34-gnu/arch/frv/kernel/gdb-io.c linux-libre-2.6.35-gnu/arch/frv/kernel/gdb-io.c
--- linux-libre-2.6.34-gnu/arch/frv/kernel/gdb-io.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/kernel/gdb-io.c	2010-08-01 18:11:14.000000000 -0400
@@ -171,11 +171,11 @@
 		return -EINTR;
 	}
 	else if (st & (UART_LSR_FE|UART_LSR_OE|UART_LSR_PE)) {
-		gdbstub_proto("### GDB Rx Error (st=%02x) ###\n",st);
+		gdbstub_io("### GDB Rx Error (st=%02x) ###\n",st);
 		return -EIO;
 	}
 	else {
-		gdbstub_proto("### GDB Rx %02x (st=%02x) ###\n",ch,st);
+		gdbstub_io("### GDB Rx %02x (st=%02x) ###\n",ch,st);
 		*_ch = ch & 0x7f;
 		return 0;
 	}
diff -druN linux-libre-2.6.34-gnu/arch/frv/kernel/gdb-stub.c linux-libre-2.6.35-gnu/arch/frv/kernel/gdb-stub.c
--- linux-libre-2.6.34-gnu/arch/frv/kernel/gdb-stub.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/kernel/gdb-stub.c	2010-08-01 18:11:14.000000000 -0400
@@ -1344,6 +1344,44 @@
 
 } /* end gdbstub_get_mmu_state() */
 
+/*
+ * handle general query commands of the form 'qXXXXX'
+ */
+static void gdbstub_handle_query(void)
+{
+	if (strcmp(input_buffer, "qAttached") == 0) {
+		/* return current thread ID */
+		sprintf(output_buffer, "1");
+		return;
+	}
+
+	if (strcmp(input_buffer, "qC") == 0) {
+		/* return current thread ID */
+		sprintf(output_buffer, "QC 0");
+		return;
+	}
+
+	if (strcmp(input_buffer, "qOffsets") == 0) {
+		/* return relocation offset of text and data segments */
+		sprintf(output_buffer, "Text=0;Data=0;Bss=0");
+		return;
+	}
+
+	if (strcmp(input_buffer, "qSymbol::") == 0) {
+		sprintf(output_buffer, "OK");
+		return;
+	}
+
+	if (strcmp(input_buffer, "qSupported") == 0) {
+		/* query of supported features */
+		sprintf(output_buffer, "PacketSize=%u;ReverseContinue-;ReverseStep-",
+			sizeof(input_buffer));
+		return;
+	}
+
+	gdbstub_strcpy(output_buffer,"E01");
+}
+
 /*****************************************************************************/
 /*
  * handle event interception and GDB remote protocol processing
@@ -1751,6 +1789,12 @@
 			flush_cache = 1;
 			break;
 
+			/* pNN: Read value of reg N and return it */
+		case 'p':
+			/* return no value, indicating that we don't support
+			 * this command and that gdb should use 'g' instead */
+			break;
+
 			/* PNN,=RRRRRRRR: Write value R to reg N return OK */
 		case 'P':
 			ptr = &input_buffer[1];
@@ -1840,6 +1884,10 @@
 		case 'k' :
 			goto done;	/* just continue */
 
+			/* detach */
+		case 'D':
+			gdbstub_strcpy(output_buffer, "OK");
+			break;
 
 			/* reset the whole machine (FIXME: system dependent) */
 		case 'r':
@@ -1852,6 +1900,14 @@
 			__debug_status.dcr |= DCR_SE;
 			goto done;
 
+			/* extended command */
+		case 'v':
+			if (strcmp(input_buffer, "vCont?") == 0) {
+				output_buffer[0] = 0;
+				break;
+			}
+			goto unsupported_cmd;
+
 			/* set baud rate (bBB) */
 		case 'b':
 			ptr = &input_buffer[1];
@@ -1923,8 +1979,19 @@
 			gdbstub_strcpy(output_buffer,"OK");
 			break;
 
+			/* Thread-setting packet */
+		case 'H':
+			gdbstub_strcpy(output_buffer, "OK");
+			break;
+
+		case 'q':
+			gdbstub_handle_query();
+			break;
+
 		default:
+		unsupported_cmd:
 			gdbstub_proto("### GDB Unsupported Cmd '%s'\n",input_buffer);
+			gdbstub_strcpy(output_buffer,"E01");
 			break;
 		}
 
diff -druN linux-libre-2.6.34-gnu/arch/frv/kernel/head.S linux-libre-2.6.35-gnu/arch/frv/kernel/head.S
--- linux-libre-2.6.34-gnu/arch/frv/kernel/head.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/kernel/head.S	2010-08-01 18:11:14.000000000 -0400
@@ -542,7 +542,7 @@
 	.size		_boot, .-_boot
 
 	# provide a point for GDB to place a break
-	.section	.text.start,"ax"
+	.section	.text..start,"ax"
 	.globl		_start
 	.balign		4
 _start:
diff -druN linux-libre-2.6.34-gnu/arch/frv/kernel/ptrace.c linux-libre-2.6.35-gnu/arch/frv/kernel/ptrace.c
--- linux-libre-2.6.34-gnu/arch/frv/kernel/ptrace.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/kernel/ptrace.c	2010-08-01 18:11:14.000000000 -0400
@@ -344,26 +344,6 @@
 					     0, sizeof(child->thread.user->f),
 					     (const void __user *)data);
 
-	case PTRACE_GETFDPIC:
-		tmp = 0;
-		switch (addr) {
-		case PTRACE_GETFDPIC_EXEC:
-			tmp = child->mm->context.exec_fdpic_loadmap;
-			break;
-		case PTRACE_GETFDPIC_INTERP:
-			tmp = child->mm->context.interp_fdpic_loadmap;
-			break;
-		default:
-			break;
-		}
-
-		ret = 0;
-		if (put_user(tmp, (unsigned long *) data)) {
-			ret = -EFAULT;
-			break;
-		}
-		break;
-
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff -druN linux-libre-2.6.34-gnu/arch/frv/kernel/sysctl.c linux-libre-2.6.35-gnu/arch/frv/kernel/sysctl.c
--- linux-libre-2.6.34-gnu/arch/frv/kernel/sysctl.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/kernel/sysctl.c	2010-08-01 18:11:14.000000000 -0400
@@ -46,8 +46,9 @@
 /*
  * handle requests to dynamically switch the write caching mode delivered by /proc
  */
-static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp,
-				 void __user *buffer, size_t *lenp, loff_t *ppos)
+static int procctl_frv_cachemode(ctl_table *table, int write,
+				 void __user *buffer, size_t *lenp,
+				 loff_t *ppos)
 {
 	unsigned long hsr0;
 	char buff[8];
@@ -84,7 +85,7 @@
 	}
 
 	/* read the state */
-	if (filp->f_pos > 0) {
+	if (*ppos > 0) {
 		*lenp = 0;
 		return 0;
 	}
@@ -110,7 +111,7 @@
 		return -EFAULT;
 
 	*lenp = len;
-	filp->f_pos = len;
+	*ppos = len;
 	return 0;
 
 } /* end procctl_frv_cachemode() */
@@ -120,8 +121,9 @@
  * permit the mm_struct the nominated process is using have its MMU context ID pinned
  */
 #ifdef CONFIG_MMU
-static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp,
-				void __user *buffer, size_t *lenp, loff_t *ppos)
+static int procctl_frv_pin_cxnr(ctl_table *table, int write,
+				void __user *buffer, size_t *lenp,
+				loff_t *ppos)
 {
 	pid_t pid;
 	char buff[16], *p;
@@ -150,7 +152,7 @@
 	}
 
 	/* read the currently pinned CXN */
-	if (filp->f_pos > 0) {
+	if (*ppos > 0) {
 		*lenp = 0;
 		return 0;
 	}
@@ -163,7 +165,7 @@
 		return -EFAULT;
 
 	*lenp = len;
-	filp->f_pos = len;
+	*ppos = len;
 	return 0;
 
 } /* end procctl_frv_pin_cxnr() */
diff -druN linux-libre-2.6.34-gnu/arch/frv/kernel/time.c linux-libre-2.6.35-gnu/arch/frv/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/frv/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -48,20 +48,12 @@
 	.name = "timer",
 };
 
-static inline int set_rtc_mmss(unsigned long nowtime)
-{
-	return -1;
-}
-
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
 static irqreturn_t timer_interrupt(int irq, void *dummy)
 {
-	/* last time the cmos clock got updated */
-	static long last_rtc_update = 0;
-
 	profile_tick(CPU_PROFILING);
 	/*
 	 * Here we are in the timer irq handler. We just have irqs locally
@@ -74,22 +66,6 @@
 
 	do_timer(1);
 
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2
-	    ) {
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
-
 #ifdef CONFIG_HEARTBEAT
 	static unsigned short n;
 	n++;
@@ -119,7 +95,8 @@
 	__set_TCSR_DATA(0, base >> 8);
 }
 
-void time_init(void)
+
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned int year, mon, day, hour, min, sec;
 
@@ -135,9 +112,12 @@
 
 	if ((year += 1900) < 1970)
 		year += 100;
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = 0;
+	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+	ts->tv_nsec = 0;
+}
 
+void time_init(void)
+{
 	/* install scheduling interrupt handler */
 	setup_irq(IRQ_CPU_TIMER0, &timer_irq);
 
diff -druN linux-libre-2.6.34-gnu/arch/frv/kernel/vmlinux.lds.S linux-libre-2.6.35-gnu/arch/frv/kernel/vmlinux.lds.S
--- linux-libre-2.6.34-gnu/arch/frv/kernel/vmlinux.lds.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/kernel/vmlinux.lds.S	2010-08-01 18:11:14.000000000 -0400
@@ -57,10 +57,10 @@
   _text = .;
   _stext = .;
   .text : {
-	*(.text.start)
-	*(.text.entry)
-	*(.text.break)
-	*(.text.tlbmiss)
+	*(.text..start)
+	*(.text..entry)
+	*(.text..break)
+	*(.text..tlbmiss)
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT
@@ -114,7 +114,7 @@
 
   .sbss		: { *(.sbss .sbss.*) }
   .bss		: { *(.bss .bss.*) }
-  .bss.stack	: { *(.bss) }
+  .bss..stack	: { *(.bss) }
 
   __bss_stop = .;
   _end = . ;
diff -druN linux-libre-2.6.34-gnu/arch/frv/mm/fault.c linux-libre-2.6.35-gnu/arch/frv/mm/fault.c
--- linux-libre-2.6.34-gnu/arch/frv/mm/fault.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/mm/fault.c	2010-08-01 18:11:14.000000000 -0400
@@ -257,10 +257,10 @@
  */
  out_of_memory:
 	up_read(&mm->mmap_sem);
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(__frame))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!user_mode(__frame))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
  do_sigbus:
 	up_read(&mm->mmap_sem);
diff -druN linux-libre-2.6.34-gnu/arch/frv/mm/tlb-miss.S linux-libre-2.6.35-gnu/arch/frv/mm/tlb-miss.S
--- linux-libre-2.6.34-gnu/arch/frv/mm/tlb-miss.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/frv/mm/tlb-miss.S	2010-08-01 18:11:14.000000000 -0400
@@ -15,7 +15,7 @@
 #include <asm/pgtable.h>
 #include <asm/spr-regs.h>
 
-	.section	.text.tlbmiss
+	.section	.text..tlbmiss
 	.balign		4
 
 	.globl		__entry_insn_mmu_miss
diff -druN linux-libre-2.6.34-gnu/arch/h8300/boot/compressed/head.S linux-libre-2.6.35-gnu/arch/h8300/boot/compressed/head.S
--- linux-libre-2.6.34-gnu/arch/h8300/boot/compressed/head.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/h8300/boot/compressed/head.S	2010-08-01 18:11:14.000000000 -0400
@@ -9,7 +9,7 @@
 
 #define SRAM_START 0xff4000
 
-	.section	.text.startup
+	.section	.text..startup
 	.global	startup
 startup:
 	mov.l	#SRAM_START+0x8000, sp
diff -druN linux-libre-2.6.34-gnu/arch/h8300/boot/compressed/vmlinux.lds linux-libre-2.6.35-gnu/arch/h8300/boot/compressed/vmlinux.lds
--- linux-libre-2.6.34-gnu/arch/h8300/boot/compressed/vmlinux.lds	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/h8300/boot/compressed/vmlinux.lds	2010-08-01 18:11:14.000000000 -0400
@@ -4,7 +4,7 @@
         {
         __stext = . ;
 	__text = .;
-	       *(.text.startup)
+	       *(.text..startup)
 	       *(.text)
         __etext = . ;
         }
diff -druN linux-libre-2.6.34-gnu/arch/h8300/include/asm/atomic.h linux-libre-2.6.35-gnu/arch/h8300/include/asm/atomic.h
--- linux-libre-2.6.34-gnu/arch/h8300/include/asm/atomic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/h8300/include/asm/atomic.h	2010-08-01 18:11:14.000000000 -0400
@@ -10,7 +10,7 @@
 
 #define ATOMIC_INIT(i)	{ (i) }
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = i)
 
 #include <asm/system.h>
diff -druN linux-libre-2.6.34-gnu/arch/h8300/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/h8300/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/h8300/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/h8300/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,17 +1,7 @@
 #ifndef _H8300_SCATTERLIST_H
 #define _H8300_SCATTERLIST_H
 
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-	dma_addr_t	dma_address;
-	unsigned int	length;
-};
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD	(0xffffffff)
 
diff -druN linux-libre-2.6.34-gnu/arch/h8300/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/h8300/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/h8300/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/h8300/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -87,7 +87,7 @@
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE		4
+#define TIF_MEMDIE		4	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_NOTIFY_RESUME	6	/* callback before returning to user */
 #define TIF_FREEZE		16	/* is freezing for suspend */
diff -druN linux-libre-2.6.34-gnu/arch/h8300/kernel/time.c linux-libre-2.6.35-gnu/arch/h8300/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/h8300/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/h8300/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -41,7 +41,7 @@
 	update_process_times(user_mode(get_irq_regs()));
 }
 
-void __init time_init(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned int year, mon, day, hour, min, sec;
 
@@ -56,8 +56,12 @@
 #endif
 	if ((year += 1900) < 1970)
 		year += 100;
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = 0;
+	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+	ts->tv_nsec = 0;
+}
+
+void __init time_init(void)
+{
 
 	h8300_timer_setup();
 }
diff -druN linux-libre-2.6.34-gnu/arch/ia64/hp/common/sba_iommu.c linux-libre-2.6.35-gnu/arch/ia64/hp/common/sba_iommu.c
--- linux-libre-2.6.34-gnu/arch/ia64/hp/common/sba_iommu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/hp/common/sba_iommu.c	2010-08-01 18:11:14.000000000 -0400
@@ -2046,13 +2046,13 @@
 	struct ioc *ioc;
 	acpi_status status;
 	u64 hpa, length;
-	struct acpi_device_info *dev_info;
+	struct acpi_device_info *adi;
 
 	status = hp_acpi_csr_space(device->handle, &hpa, &length);
 	if (ACPI_FAILURE(status))
 		return 1;
 
-	status = acpi_get_object_info(device->handle, &dev_info);
+	status = acpi_get_object_info(device->handle, &adi);
 	if (ACPI_FAILURE(status))
 		return 1;
 
@@ -2060,13 +2060,13 @@
 	 * For HWP0001, only SBA appears in ACPI namespace.  It encloses the PCI
 	 * root bridges, and its CSR space includes the IOC function.
 	 */
-	if (strncmp("HWP0001", dev_info->hardware_id.string, 7) == 0) {
+	if (strncmp("HWP0001", adi->hardware_id.string, 7) == 0) {
 		hpa += ZX1_IOC_OFFSET;
 		/* zx1 based systems default to kernel page size iommu pages */
 		if (!iovp_shift)
 			iovp_shift = min(PAGE_SHIFT, 16);
 	}
-	kfree(dev_info);
+	kfree(adi);
 
 	/*
 	 * default anything not caught above or specified on cmdline to 4k
diff -druN linux-libre-2.6.34-gnu/arch/ia64/include/asm/acpi.h linux-libre-2.6.35-gnu/arch/ia64/include/asm/acpi.h
--- linux-libre-2.6.34-gnu/arch/ia64/include/asm/acpi.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/include/asm/acpi.h	2010-08-01 18:11:14.000000000 -0400
@@ -94,7 +94,6 @@
 #define acpi_noirq 0	/* ACPI always enabled on IA64 */
 #define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
 #define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
-#define acpi_ht 0	/* no HT-only mode on IA64 */
 #endif
 #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
 static inline void disable_acpi(void) { }
diff -druN linux-libre-2.6.34-gnu/arch/ia64/include/asm/asmmacro.h linux-libre-2.6.35-gnu/arch/ia64/include/asm/asmmacro.h
--- linux-libre-2.6.34-gnu/arch/ia64/include/asm/asmmacro.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/include/asm/asmmacro.h	2010-08-01 18:11:14.000000000 -0400
@@ -70,12 +70,12 @@
  * path (ivt.S - TLB miss processing) or in places where it might not be
  * safe to use a "tpa" instruction (mca_asm.S - error recovery).
  */
-	.section ".data.patch.vtop", "a"	// declare section & section attributes
+	.section ".data..patch.vtop", "a"	// declare section & section attributes
 	.previous
 
 #define	LOAD_PHYSICAL(pr, reg, obj)		\
 [1:](pr)movl reg = obj;				\
-	.xdata4 ".data.patch.vtop", 1b-.
+	.xdata4 ".data..patch.vtop", 1b-.
 
 /*
  * For now, we always put in the McKinley E9 workaround.  On CPUs that don't need it,
@@ -84,11 +84,11 @@
 #define DO_MCKINLEY_E9_WORKAROUND
 
 #ifdef DO_MCKINLEY_E9_WORKAROUND
-	.section ".data.patch.mckinley_e9", "a"
+	.section ".data..patch.mckinley_e9", "a"
 	.previous
 /* workaround for Itanium 2 Errata 9: */
 # define FSYS_RETURN					\
-	.xdata4 ".data.patch.mckinley_e9", 1f-.;	\
+	.xdata4 ".data..patch.mckinley_e9", 1f-.;	\
 1:{ .mib;						\
 	nop.m 0;					\
 	mov r16=ar.pfs;					\
@@ -107,11 +107,11 @@
  * If physical stack register size is different from DEF_NUM_STACK_REG,
  * dynamically patch the kernel for correct size.
  */
-	.section ".data.patch.phys_stack_reg", "a"
+	.section ".data..patch.phys_stack_reg", "a"
 	.previous
 #define LOAD_PHYS_STACK_REG_SIZE(reg)			\
 [1:]	adds reg=IA64_NUM_PHYS_STACK_REG*8+8,r0;	\
-	.xdata4 ".data.patch.phys_stack_reg", 1b-.
+	.xdata4 ".data..patch.phys_stack_reg", 1b-.
 
 /*
  * Up until early 2004, use of .align within a function caused bad unwind info.
diff -druN linux-libre-2.6.34-gnu/arch/ia64/include/asm/atomic.h linux-libre-2.6.35-gnu/arch/ia64/include/asm/atomic.h
--- linux-libre-2.6.34-gnu/arch/ia64/include/asm/atomic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/include/asm/atomic.h	2010-08-01 18:11:14.000000000 -0400
@@ -21,8 +21,8 @@
 #define ATOMIC_INIT(i)		((atomic_t) { (i) })
 #define ATOMIC64_INIT(i)	((atomic64_t) { (i) })
 
-#define atomic_read(v)		((v)->counter)
-#define atomic64_read(v)	((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
+#define atomic64_read(v)	(*(volatile long *)&(v)->counter)
 
 #define atomic_set(v,i)		(((v)->counter) = (i))
 #define atomic64_set(v,i)	(((v)->counter) = (i))
diff -druN linux-libre-2.6.34-gnu/arch/ia64/include/asm/bitops.h linux-libre-2.6.35-gnu/arch/ia64/include/asm/bitops.h
--- linux-libre-2.6.34-gnu/arch/ia64/include/asm/bitops.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/include/asm/bitops.h	2010-08-01 18:11:14.000000000 -0400
@@ -437,17 +437,18 @@
  * hweightN: returns the hamming weight (i.e. the number
  * of bits set) of a N-bit word
  */
-static __inline__ unsigned long
-hweight64 (unsigned long x)
+static __inline__ unsigned long __arch_hweight64(unsigned long x)
 {
 	unsigned long result;
 	result = ia64_popcnt(x);
 	return result;
 }
 
-#define hweight32(x)	(unsigned int) hweight64((x) & 0xfffffffful)
-#define hweight16(x)	(unsigned int) hweight64((x) & 0xfffful)
-#define hweight8(x)	(unsigned int) hweight64((x) & 0xfful)
+#define __arch_hweight32(x) ((unsigned int) __arch_hweight64((x) & 0xfffffffful))
+#define __arch_hweight16(x) ((unsigned int) __arch_hweight64((x) & 0xfffful))
+#define __arch_hweight8(x)  ((unsigned int) __arch_hweight64((x) & 0xfful))
+
+#include <asm-generic/bitops/const_hweight.h>
 
 #endif /* __KERNEL__ */
 
diff -druN linux-libre-2.6.34-gnu/arch/ia64/include/asm/cache.h linux-libre-2.6.35-gnu/arch/ia64/include/asm/cache.h
--- linux-libre-2.6.34-gnu/arch/ia64/include/asm/cache.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/include/asm/cache.h	2010-08-01 18:11:14.000000000 -0400
@@ -24,6 +24,6 @@
 # define SMP_CACHE_BYTES	(1 << 3)
 #endif
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 #endif /* _ASM_IA64_CACHE_H */
diff -druN linux-libre-2.6.34-gnu/arch/ia64/include/asm/mmzone.h linux-libre-2.6.35-gnu/arch/ia64/include/asm/mmzone.h
--- linux-libre-2.6.34-gnu/arch/ia64/include/asm/mmzone.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/include/asm/mmzone.h	2010-08-01 18:11:14.000000000 -0400
@@ -19,16 +19,12 @@
 
 static inline int pfn_to_nid(unsigned long pfn)
 {
-#ifdef CONFIG_NUMA
 	extern int paddr_to_nid(unsigned long);
 	int nid = paddr_to_nid(pfn << PAGE_SHIFT);
 	if (nid < 0)
 		return 0;
 	else
 		return nid;
-#else
-	return 0;
-#endif
 }
 
 #ifdef CONFIG_IA64_DIG /* DIG systems are small */
diff -druN linux-libre-2.6.34-gnu/arch/ia64/include/asm/percpu.h linux-libre-2.6.35-gnu/arch/ia64/include/asm/percpu.h
--- linux-libre-2.6.34-gnu/arch/ia64/include/asm/percpu.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/include/asm/percpu.h	2010-08-01 18:11:14.000000000 -0400
@@ -31,7 +31,7 @@
 
 #endif	/* SMP */
 
-#define PER_CPU_BASE_SECTION ".data.percpu"
+#define PER_CPU_BASE_SECTION ".data..percpu"
 
 /*
  * Be extremely careful when taking the address of this variable!  Due to virtual
@@ -39,7 +39,10 @@
  * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly
  * more efficient.
  */
-#define __ia64_per_cpu_var(var)	var
+#define __ia64_per_cpu_var(var) (*({					\
+	__verify_pcpu_ptr(&(var));					\
+	((typeof(var) __kernel __force *)&(var));			\
+}))
 
 #include <asm-generic/percpu.h>
 
diff -druN linux-libre-2.6.34-gnu/arch/ia64/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/ia64/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/ia64/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,6 +1,7 @@
 #ifndef _ASM_IA64_SCATTERLIST_H
 #define _ASM_IA64_SCATTERLIST_H
 
+#include <asm-generic/scatterlist.h>
 /*
  * It used to be that ISA_DMA_THRESHOLD had something to do with the
  * DMA-limits of ISA-devices.  Nowadays, its only remaining use (apart
@@ -10,7 +11,6 @@
  * that's 4GB - 1.
  */
 #define ISA_DMA_THRESHOLD	0xffffffff
-
-#include <asm-generic/scatterlist.h>
+#define ARCH_HAS_SG_CHAIN
 
 #endif /* _ASM_IA64_SCATTERLIST_H */
diff -druN linux-libre-2.6.34-gnu/arch/ia64/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/ia64/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/ia64/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -102,7 +102,7 @@
 #define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
 #define TIF_NOTIFY_RESUME	6	/* resumption notification requested */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		17
+#define TIF_MEMDIE		17	/* is terminating due to OOM killer */
 #define TIF_MCA_INIT		18	/* this task is processing MCA or INIT */
 #define TIF_DB_DISABLED		19	/* debug trap disabled for fsyscall */
 #define TIF_FREEZE		20	/* is freezing for suspend */
diff -druN linux-libre-2.6.34-gnu/arch/ia64/include/asm/topology.h linux-libre-2.6.35-gnu/arch/ia64/include/asm/topology.h
--- linux-libre-2.6.34-gnu/arch/ia64/include/asm/topology.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/include/asm/topology.h	2010-08-01 18:11:14.000000000 -0400
@@ -26,11 +26,6 @@
 #define RECLAIM_DISTANCE 15
 
 /*
- * Returns the number of the node containing CPU 'cpu'
- */
-#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
-
-/*
  * Returns a bitmask of CPUs on Node 'node'.
  */
 #define cpumask_of_node(node) ((node) == -1 ?				\
diff -druN linux-libre-2.6.34-gnu/arch/ia64/Kconfig linux-libre-2.6.35-gnu/arch/ia64/Kconfig
--- linux-libre-2.6.34-gnu/arch/ia64/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -56,10 +56,10 @@
 config NEED_DMA_MAP_STATE
 	def_bool y
 
-config SWIOTLB
-       bool
+config NEED_SG_DMA_LENGTH
+	def_bool y
 
-config IOMMU_HELPER
+config SWIOTLB
        bool
 
 config GENERIC_LOCKBREAK
@@ -498,6 +498,14 @@
 	def_bool y
 	depends on NUMA
 
+config USE_PERCPU_NUMA_NODE_ID
+	def_bool y
+	depends on NUMA
+
+config HAVE_MEMORYLESS_NODES
+	def_bool y
+	depends on NUMA
+
 config ARCH_PROC_KCORE_TEXT
 	def_bool y
 	depends on PROC_KCORE
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/acpi.c linux-libre-2.6.35-gnu/arch/ia64/kernel/acpi.c
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/acpi.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/acpi.c	2010-08-01 18:11:14.000000000 -0400
@@ -785,6 +785,14 @@
 	return 0;
 }
 
+int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
+{
+	if (isa_irq >= 16)
+		return -1;
+	*gsi = isa_irq;
+	return 0;
+}
+
 /*
  *  ACPI based hotplug CPU support
  */
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/cpufreq/acpi-cpufreq.c linux-libre-2.6.35-gnu/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/cpufreq/acpi-cpufreq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/cpufreq/acpi-cpufreq.c	2010-08-01 18:11:14.000000000 -0400
@@ -113,7 +113,7 @@
 	dprintk("processor_get_freq\n");
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	if (smp_processor_id() != cpu)
 		goto migrate_end;
 
@@ -121,7 +121,7 @@
 	ret = processor_get_pstate(&value);
 
 	if (ret) {
-		set_cpus_allowed(current, saved_mask);
+		set_cpus_allowed_ptr(current, &saved_mask);
 		printk(KERN_WARNING "get performance failed with error %d\n",
 		       ret);
 		ret = 0;
@@ -131,7 +131,7 @@
 	ret = (clock_freq*1000);
 
 migrate_end:
-	set_cpus_allowed(current, saved_mask);
+	set_cpus_allowed_ptr(current, &saved_mask);
 	return ret;
 }
 
@@ -151,7 +151,7 @@
 	dprintk("processor_set_freq\n");
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	if (smp_processor_id() != cpu) {
 		retval = -EAGAIN;
 		goto migrate_end;
@@ -208,7 +208,7 @@
 	retval = 0;
 
 migrate_end:
-	set_cpus_allowed(current, saved_mask);
+	set_cpus_allowed_ptr(current, &saved_mask);
 	return (retval);
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/gate-data.S linux-libre-2.6.35-gnu/arch/ia64/kernel/gate-data.S
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/gate-data.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/gate-data.S	2010-08-01 18:11:14.000000000 -0400
@@ -1,3 +1,3 @@
-	.section .data.gate, "aw"
+	.section .data..gate, "aw"
 
 	.incbin "arch/ia64/kernel/gate.so"
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/gate.lds.S linux-libre-2.6.35-gnu/arch/ia64/kernel/gate.lds.S
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/gate.lds.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/gate.lds.S	2010-08-01 18:11:14.000000000 -0400
@@ -33,21 +33,21 @@
 	 */
 	. = GATE_ADDR + 0x600;
 
-	.data.patch		: {
+	.data..patch		: {
 		__paravirt_start_gate_mckinley_e9_patchlist = .;
-		*(.data.patch.mckinley_e9)
+		*(.data..patch.mckinley_e9)
 		__paravirt_end_gate_mckinley_e9_patchlist = .;
 
 		__paravirt_start_gate_vtop_patchlist = .;
-		*(.data.patch.vtop)
+		*(.data..patch.vtop)
 		__paravirt_end_gate_vtop_patchlist = .;
 
 		__paravirt_start_gate_fsyscall_patchlist = .;
-		*(.data.patch.fsyscall_table)
+		*(.data..patch.fsyscall_table)
 		__paravirt_end_gate_fsyscall_patchlist = .;
 
 		__paravirt_start_gate_brl_fsys_bubble_down_patchlist = .;
-		*(.data.patch.brl_fsys_bubble_down)
+		*(.data..patch.brl_fsys_bubble_down)
 		__paravirt_end_gate_brl_fsys_bubble_down_patchlist = .;
 	}						:readable
 
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/gate.S linux-libre-2.6.35-gnu/arch/ia64/kernel/gate.S
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/gate.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/gate.S	2010-08-01 18:11:14.000000000 -0400
@@ -21,18 +21,18 @@
  * to targets outside the shared object) and to avoid multi-phase kernel builds, we
  * simply create minimalistic "patch lists" in special ELF sections.
  */
-	.section ".data.patch.fsyscall_table", "a"
+	.section ".data..patch.fsyscall_table", "a"
 	.previous
 #define LOAD_FSYSCALL_TABLE(reg)			\
 [1:]	movl reg=0;					\
-	.xdata4 ".data.patch.fsyscall_table", 1b-.
+	.xdata4 ".data..patch.fsyscall_table", 1b-.
 
-	.section ".data.patch.brl_fsys_bubble_down", "a"
+	.section ".data..patch.brl_fsys_bubble_down", "a"
 	.previous
 #define BRL_COND_FSYS_BUBBLE_DOWN(pr)			\
 [1:](pr)brl.cond.sptk 0;				\
 	;;						\
-	.xdata4 ".data.patch.brl_fsys_bubble_down", 1b-.
+	.xdata4 ".data..patch.brl_fsys_bubble_down", 1b-.
 
 GLOBAL_ENTRY(__kernel_syscall_via_break)
 	.prologue
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/init_task.c linux-libre-2.6.35-gnu/arch/ia64/kernel/init_task.c
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/init_task.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/init_task.c	2010-08-01 18:11:14.000000000 -0400
@@ -23,7 +23,7 @@
  * Initial task structure.
  *
  * We need to make sure that this is properly aligned due to the way process stacks are
- * handled. This is done by having a special ".data.init_task" section...
+ * handled. This is done by having a special ".data..init_task" section...
  */
 #define init_thread_info	init_task_mem.s.thread_info
 
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/irq_ia64.c linux-libre-2.6.35-gnu/arch/ia64/kernel/irq_ia64.c
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/irq_ia64.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/irq_ia64.c	2010-08-01 18:11:14.000000000 -0400
@@ -29,6 +29,7 @@
 #include <linux/threads.h>
 #include <linux/bitops.h>
 #include <linux/irq.h>
+#include <linux/ratelimit.h>
 
 #include <asm/delay.h>
 #include <asm/intrinsics.h>
@@ -467,13 +468,9 @@
 		sp = ia64_getreg(_IA64_REG_SP);
 
 		if ((sp - bsp) < 1024) {
-			static unsigned char count;
-			static long last_time;
+			static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5);
 
-			if (time_after(jiffies, last_time + 5 * HZ))
-				count = 0;
-			if (++count < 5) {
-				last_time = jiffies;
+			if (__ratelimit(&ratelimit)) {
 				printk("ia64_handle_irq: DANGER: less than "
 				       "1KB of free stack space!!\n"
 				       "(bsp=0x%lx, sp=%lx)\n", bsp, sp);
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/ivt.S linux-libre-2.6.35-gnu/arch/ia64/kernel/ivt.S
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/ivt.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/ivt.S	2010-08-01 18:11:14.000000000 -0400
@@ -82,7 +82,7 @@
 	mov r19=n;;			/* prepare to save predicates */		\
 	br.sptk.many dispatch_to_fault_handler
 
-	.section .text.ivt,"ax"
+	.section .text..ivt,"ax"
 
 	.align 32768	// align on 32KB boundary
 	.global ia64_ivt
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/Makefile.gate linux-libre-2.6.35-gnu/arch/ia64/kernel/Makefile.gate
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/Makefile.gate	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/Makefile.gate	2010-08-01 18:11:14.000000000 -0400
@@ -21,7 +21,7 @@
 $(obj)/gate-syms.o: $(obj)/gate.lds $(obj)/gate.o FORCE
 	$(call if_changed,gate)
 
-# gate-data.o contains the gate DSO image as data in section .data.gate.
+# gate-data.o contains the gate DSO image as data in section .data..gate.
 # We must build gate.so before we can assemble it.
 # Note: kbuild does not track this dependency due to usage of .incbin
 $(obj)/gate-data.o: $(obj)/gate.so
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/minstate.h linux-libre-2.6.35-gnu/arch/ia64/kernel/minstate.h
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/minstate.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/minstate.h	2010-08-01 18:11:14.000000000 -0400
@@ -16,7 +16,7 @@
 #define ACCOUNT_SYS_ENTER
 #endif
 
-.section ".data.patch.rse", "a"
+.section ".data..patch.rse", "a"
 .previous
 
 /*
@@ -215,7 +215,7 @@
 (pUStk) extr.u r17=r18,3,6;			\
 (pUStk)	sub r16=r18,r22;			\
 [1:](pKStk)	br.cond.sptk.many 1f;		\
-	.xdata4 ".data.patch.rse",1b-.		\
+	.xdata4 ".data..patch.rse",1b-.		\
 	;;					\
 	cmp.ge p6,p7 = 33,r17;			\
 	;;					\
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/paravirtentry.S linux-libre-2.6.35-gnu/arch/ia64/kernel/paravirtentry.S
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/paravirtentry.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/paravirtentry.S	2010-08-01 18:11:14.000000000 -0400
@@ -28,7 +28,7 @@
 #include "entry.h"
 
 #define DATA8(sym, init_value)			\
-	.pushsection .data.read_mostly ;	\
+	.pushsection .data..read_mostly ;	\
 	.align 8 ;				\
 	.global sym ;				\
 	sym: ;					\
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/pci-swiotlb.c linux-libre-2.6.35-gnu/arch/ia64/kernel/pci-swiotlb.c
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/pci-swiotlb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/pci-swiotlb.c	2010-08-01 18:11:14.000000000 -0400
@@ -31,8 +31,6 @@
 	.unmap_sg = swiotlb_unmap_sg_attrs,
 	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
 	.sync_single_for_device = swiotlb_sync_single_for_device,
-	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
-	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
 	.sync_sg_for_device = swiotlb_sync_sg_for_device,
 	.dma_supported = swiotlb_dma_supported,
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/ptrace.c linux-libre-2.6.35-gnu/arch/ia64/kernel/ptrace.c
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/ptrace.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/ptrace.c	2010-08-01 18:11:14.000000000 -0400
@@ -638,7 +638,7 @@
 	 */
 
 	read_lock(&tasklist_lock);
-	if (child->signal) {
+	if (child->sighand) {
 		spin_lock_irq(&child->sighand->siglock);
 		if (child->state == TASK_STOPPED &&
 		    !test_and_set_tsk_thread_flag(child, TIF_RESTORE_RSE)) {
@@ -662,7 +662,7 @@
 	 * job control stop, so that SIGCONT can be used to wake it up.
 	 */
 	read_lock(&tasklist_lock);
-	if (child->signal) {
+	if (child->sighand) {
 		spin_lock_irq(&child->sighand->siglock);
 		if (child->state == TASK_TRACED &&
 		    (child->signal->flags & SIGNAL_STOP_STOPPED)) {
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/salinfo.c linux-libre-2.6.35-gnu/arch/ia64/kernel/salinfo.c
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/salinfo.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/salinfo.c	2010-08-01 18:11:14.000000000 -0400
@@ -404,10 +404,9 @@
 call_on_cpu(int cpu, void (*fn)(void *), void *arg)
 {
 	cpumask_t save_cpus_allowed = current->cpus_allowed;
-	cpumask_t new_cpus_allowed = cpumask_of_cpu(cpu);
-	set_cpus_allowed(current, new_cpus_allowed);
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	(*fn)(arg);
-	set_cpus_allowed(current, save_cpus_allowed);
+	set_cpus_allowed_ptr(current, &save_cpus_allowed);
 }
 
 static void
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/smpboot.c linux-libre-2.6.35-gnu/arch/ia64/kernel/smpboot.c
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/smpboot.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/smpboot.c	2010-08-01 18:11:14.000000000 -0400
@@ -390,6 +390,14 @@
 
 	fix_b0_for_bsp();
 
+#ifdef CONFIG_NUMA
+	/*
+	 * numa_node_id() works after this.
+	 */
+	set_numa_node(cpu_to_node_map[cpuid]);
+	set_numa_mem(local_memory_node(cpu_to_node_map[cpuid]));
+#endif
+
 	ipi_call_lock_irq();
 	spin_lock(&vector_lock);
 	/* Setup the per cpu irq handling data structures */
@@ -632,6 +640,9 @@
 {
 	cpu_set(smp_processor_id(), cpu_online_map);
 	cpu_set(smp_processor_id(), cpu_callin_map);
+#ifdef CONFIG_NUMA
+	set_numa_node(cpu_to_node_map[smp_processor_id()]);
+#endif
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 	paravirt_post_smp_prepare_boot_cpu();
 }
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/time.c linux-libre-2.6.35-gnu/arch/ia64/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -430,18 +430,16 @@
 }
 module_init(rtc_init);
 
+void read_persistent_clock(struct timespec *ts)
+{
+	efi_gettimeofday(ts);
+}
+
 void __init
 time_init (void)
 {
 	register_percpu_irq(IA64_TIMER_VECTOR, &timer_irqaction);
-	efi_gettimeofday(&xtime);
 	ia64_init_itm();
-
-	/*
-	 * Initialize wall_to_monotonic such that adding it to xtime will yield zero, the
-	 * tv_nsec field must be normalized (i.e., 0 <= nsec < NSEC_PER_SEC).
-	 */
-	set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
 }
 
 /*
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/topology.c linux-libre-2.6.35-gnu/arch/ia64/kernel/topology.c
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/topology.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/topology.c	2010-08-01 18:11:14.000000000 -0400
@@ -361,12 +361,12 @@
 		return 0;
 
 	oldmask = current->cpus_allowed;
-	retval = set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	retval = set_cpus_allowed_ptr(current, cpumask_of(cpu));
 	if (unlikely(retval))
 		return retval;
 
 	retval = cpu_cache_sysfs_init(cpu);
-	set_cpus_allowed(current, oldmask);
+	set_cpus_allowed_ptr(current, &oldmask);
 	if (unlikely(retval < 0))
 		return retval;
 
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/unaligned.c linux-libre-2.6.35-gnu/arch/ia64/kernel/unaligned.c
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/unaligned.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/unaligned.c	2010-08-01 18:11:14.000000000 -0400
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/tty.h>
+#include <linux/ratelimit.h>
 
 #include <asm/intrinsics.h>
 #include <asm/processor.h>
@@ -1283,24 +1284,9 @@
 /*
  * Make sure we log the unaligned access, so that user/sysadmin can notice it and
  * eventually fix the program.  However, we don't want to do that for every access so we
- * pace it with jiffies.  This isn't really MP-safe, but it doesn't really have to be
- * either...
+ * pace it with jiffies.
  */
-static int
-within_logging_rate_limit (void)
-{
-	static unsigned long count, last_time;
-
-	if (time_after(jiffies, last_time + 5 * HZ))
-		count = 0;
-	if (count < 5) {
-		last_time = jiffies;
-		count++;
-		return 1;
-	}
-	return 0;
-
-}
+static DEFINE_RATELIMIT_STATE(logging_rate_limit, 5 * HZ, 5);
 
 void
 ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
@@ -1337,7 +1323,7 @@
 
 		if (!no_unaligned_warning &&
 		    !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) &&
-		    within_logging_rate_limit())
+		    __ratelimit(&logging_rate_limit))
 		{
 			char buf[200];	/* comm[] is at most 16 bytes... */
 			size_t len;
@@ -1370,7 +1356,7 @@
 			}
 		}
 	} else {
-		if (within_logging_rate_limit()) {
+		if (__ratelimit(&logging_rate_limit)) {
 			printk(KERN_WARNING "kernel unaligned access to 0x%016lx, ip=0x%016lx\n",
 			       ifa, regs->cr_iip + ipsr->ri);
 			if (unaligned_dump_stack)
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kernel/vmlinux.lds.S linux-libre-2.6.35-gnu/arch/ia64/kernel/vmlinux.lds.S
--- linux-libre-2.6.34-gnu/arch/ia64/kernel/vmlinux.lds.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kernel/vmlinux.lds.S	2010-08-01 18:11:14.000000000 -0400
@@ -8,7 +8,7 @@
 
 #define IVT_TEXT							\
 		VMLINUX_SYMBOL(__start_ivt_text) = .;			\
-		*(.text.ivt)						\
+		*(.text..ivt)						\
 		VMLINUX_SYMBOL(__end_ivt_text) = .;
 
 OUTPUT_FORMAT("elf64-ia64-little")
@@ -54,8 +54,8 @@
   .text2 : AT(ADDR(.text2) - LOAD_OFFSET)
 	{ *(.text2) }
 #ifdef CONFIG_SMP
-  .text.lock : AT(ADDR(.text.lock) - LOAD_OFFSET)
-	{ *(.text.lock) }
+  .text..lock : AT(ADDR(.text..lock) - LOAD_OFFSET)
+	{ *(.text..lock) }
 #endif
   _etext = .;
 
@@ -75,10 +75,10 @@
 	  __stop___mca_table = .;
 	}
 
-  .data.patch.phys_stack_reg : AT(ADDR(.data.patch.phys_stack_reg) - LOAD_OFFSET)
+  .data..patch.phys_stack_reg : AT(ADDR(.data..patch.phys_stack_reg) - LOAD_OFFSET)
 	{
 	  __start___phys_stack_reg_patchlist = .;
-	  *(.data.patch.phys_stack_reg)
+	  *(.data..patch.phys_stack_reg)
 	  __end___phys_stack_reg_patchlist = .;
 	}
 
@@ -110,24 +110,24 @@
   INIT_TEXT_SECTION(PAGE_SIZE)
   INIT_DATA_SECTION(16)
 
-  .data.patch.vtop : AT(ADDR(.data.patch.vtop) - LOAD_OFFSET)
+  .data..patch.vtop : AT(ADDR(.data..patch.vtop) - LOAD_OFFSET)
 	{
 	  __start___vtop_patchlist = .;
-	  *(.data.patch.vtop)
+	  *(.data..patch.vtop)
 	  __end___vtop_patchlist = .;
 	}
 
-  .data.patch.rse : AT(ADDR(.data.patch.rse) - LOAD_OFFSET)
+  .data..patch.rse : AT(ADDR(.data..patch.rse) - LOAD_OFFSET)
 	{
 	  __start___rse_patchlist = .;
-	  *(.data.patch.rse)
+	  *(.data..patch.rse)
 	  __end___rse_patchlist = .;
 	}
 
-  .data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET)
+  .data..patch.mckinley_e9 : AT(ADDR(.data..patch.mckinley_e9) - LOAD_OFFSET)
 	{
 	  __start___mckinley_e9_bundles = .;
-	  *(.data.patch.mckinley_e9)
+	  *(.data..patch.mckinley_e9)
 	  __end___mckinley_e9_bundles = .;
 	}
 
@@ -175,17 +175,17 @@
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
 
-  .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET)
+  .data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET)
         {
 	PAGE_ALIGNED_DATA(PAGE_SIZE)
 	  . = ALIGN(PAGE_SIZE);
 	  __start_gate_section = .;
-	  *(.data.gate)
+	  *(.data..gate)
 	  __stop_gate_section = .;
 #ifdef CONFIG_XEN
 	  . = ALIGN(PAGE_SIZE);
 	  __xen_start_gate_section = .;
-	  *(.data.gate.xen)
+	  *(.data..gate.xen)
 	  __xen_stop_gate_section = .;
 #endif
 	}
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kvm/kvm-ia64.c linux-libre-2.6.35-gnu/arch/ia64/kvm/kvm-ia64.c
--- linux-libre-2.6.34-gnu/arch/ia64/kvm/kvm-ia64.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kvm/kvm-ia64.c	2010-08-01 18:11:14.000000000 -0400
@@ -144,6 +144,7 @@
 				VP_INIT_ENV : VP_INIT_ENV_INITALIZE,
 			__pa(kvm_vm_buffer), KVM_VM_BUFFER_BASE, &tmp_base);
 	if (status != 0) {
+		spin_unlock(&vp_lock);
 		printk(KERN_WARNING"kvm: Failed to Enable VT Support!!!!\n");
 		return -EINVAL;
 	}
@@ -979,11 +980,13 @@
 		r = -EFAULT;
 		if (copy_from_user(&irq_event, argp, sizeof irq_event))
 			goto out;
+		r = -ENXIO;
 		if (irqchip_in_kernel(kvm)) {
 			__s32 status;
 			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
 				    irq_event.irq, irq_event.level);
 			if (ioctl == KVM_IRQ_LINE_STATUS) {
+				r = -EFAULT;
 				irq_event.status = status;
 				if (copy_to_user(argp, &irq_event,
 							sizeof irq_event))
@@ -1379,7 +1382,7 @@
 	int i, j;
 	unsigned long base_gfn;
 
-	slots = rcu_dereference(kvm->memslots);
+	slots = kvm_memslots(kvm);
 	for (i = 0; i < slots->nmemslots; i++) {
 		memslot = &slots->memslots[i];
 		base_gfn = memslot->base_gfn;
@@ -1535,8 +1538,10 @@
 			goto out;
 
 		if (copy_to_user(user_stack, stack,
-				 sizeof(struct kvm_ia64_vcpu_stack)))
+				 sizeof(struct kvm_ia64_vcpu_stack))) {
+			r = -EFAULT;
 			goto out;
+		}
 
 		break;
 	}
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kvm/vmm.c linux-libre-2.6.35-gnu/arch/ia64/kvm/vmm.c
--- linux-libre-2.6.34-gnu/arch/ia64/kvm/vmm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kvm/vmm.c	2010-08-01 18:11:14.000000000 -0400
@@ -51,7 +51,7 @@
 	vmm_fpswa_interface = fpswa_interface;
 
 	/*Register vmm data to kvm side*/
-	return kvm_init(&vmm_info, 1024, THIS_MODULE);
+	return kvm_init(&vmm_info, 1024, 0, THIS_MODULE);
 }
 
 static void __exit kvm_vmm_exit(void)
diff -druN linux-libre-2.6.34-gnu/arch/ia64/kvm/vmm_ivt.S linux-libre-2.6.35-gnu/arch/ia64/kvm/vmm_ivt.S
--- linux-libre-2.6.34-gnu/arch/ia64/kvm/vmm_ivt.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/kvm/vmm_ivt.S	2010-08-01 18:11:14.000000000 -0400
@@ -104,7 +104,7 @@
 	br.call.sptk.many b6=vmm_panic_handler;
 END(kvm_vmm_panic)
 
-    .section .text.ivt,"ax"
+    .section .text..ivt,"ax"
 
     .align 32768    // align on 32KB boundary
     .global kvm_ia64_ivt
diff -druN linux-libre-2.6.34-gnu/arch/ia64/mm/fault.c linux-libre-2.6.35-gnu/arch/ia64/mm/fault.c
--- linux-libre-2.6.34-gnu/arch/ia64/mm/fault.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/mm/fault.c	2010-08-01 18:11:14.000000000 -0400
@@ -148,7 +148,6 @@
 	if ((vma->vm_flags & mask) != mask)
 		goto bad_area;
 
-  survive:
 	/*
 	 * If for any reason at all we couldn't handle the fault, make
 	 * sure we exit gracefully rather than endlessly redo the
@@ -276,13 +275,7 @@
 
   out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk(KERN_CRIT "VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
 }
diff -druN linux-libre-2.6.34-gnu/arch/ia64/mm/tlb.c linux-libre-2.6.35-gnu/arch/ia64/mm/tlb.c
--- linux-libre-2.6.34-gnu/arch/ia64/mm/tlb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/mm/tlb.c	2010-08-01 18:11:14.000000000 -0400
@@ -121,7 +121,7 @@
 	ia64_invala();
 
 	for (;;) {
-		asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
+		asm volatile ("ld8.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
 		if (time_before(t, serve))
 			return;
 		cpu_relax();
diff -druN linux-libre-2.6.34-gnu/arch/ia64/pci/pci.c linux-libre-2.6.35-gnu/arch/ia64/pci/pci.c
--- linux-libre-2.6.34-gnu/arch/ia64/pci/pci.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/pci/pci.c	2010-08-01 18:11:14.000000000 -0400
@@ -335,8 +335,11 @@
 }
 
 struct pci_bus * __devinit
-pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
+pci_acpi_scan_root(struct acpi_pci_root *root)
 {
+	struct acpi_device *device = root->device;
+	int domain = root->segment;
+	int bus = root->secondary.start;
 	struct pci_controller *controller;
 	unsigned int windows = 0;
 	struct pci_bus *pbus;
diff -druN linux-libre-2.6.34-gnu/arch/ia64/scripts/unwcheck.py linux-libre-2.6.35-gnu/arch/ia64/scripts/unwcheck.py
--- linux-libre-2.6.34-gnu/arch/ia64/scripts/unwcheck.py	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/scripts/unwcheck.py	2010-08-01 18:11:14.000000000 -0400
@@ -1,4 +1,4 @@
-#!/usr/bin/env python
+#!/usr/bin/python
 #
 # Usage: unwcheck.py FILE
 #
diff -druN linux-libre-2.6.34-gnu/arch/ia64/sn/kernel/sn2/sn_hwperf.c linux-libre-2.6.35-gnu/arch/ia64/sn/kernel/sn2/sn_hwperf.c
--- linux-libre-2.6.34-gnu/arch/ia64/sn/kernel/sn2/sn_hwperf.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/sn/kernel/sn2/sn_hwperf.c	2010-08-01 18:11:14.000000000 -0400
@@ -30,7 +30,6 @@
 #include <linux/miscdevice.h>
 #include <linux/utsname.h>
 #include <linux/cpumask.h>
-#include <linux/smp_lock.h>
 #include <linux/nodemask.h>
 #include <linux/smp.h>
 #include <linux/mutex.h>
@@ -629,9 +628,9 @@
 		else {
 			/* migrate the task before calling SAL */ 
 			save_allowed = current->cpus_allowed;
-			set_cpus_allowed(current, cpumask_of_cpu(cpu));
+			set_cpus_allowed_ptr(current, cpumask_of(cpu));
 			sn_hwperf_call_sal(op_info);
-			set_cpus_allowed(current, save_allowed);
+			set_cpus_allowed_ptr(current, &save_allowed);
 		}
 	}
 	r = op_info->ret;
@@ -682,8 +681,7 @@
 /*
  * ioctl for "sn_hwperf" misc device
  */
-static int
-sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, unsigned long arg)
+static long sn_hwperf_ioctl(struct file *fp, u32 op, unsigned long arg)
 {
 	struct sn_hwperf_ioctl_args a;
 	struct cpuinfo_ia64 *cdata;
@@ -699,8 +697,6 @@
 	int i;
 	int j;
 
-	unlock_kernel();
-
 	/* only user requests are allowed here */
 	if ((op & SN_HWPERF_OP_MASK) < 10) {
 		r = -EINVAL;
@@ -859,12 +855,11 @@
 error:
 	vfree(p);
 
-	lock_kernel();
 	return r;
 }
 
 static const struct file_operations sn_hwperf_fops = {
-	.ioctl = sn_hwperf_ioctl,
+	.unlocked_ioctl = sn_hwperf_ioctl,
 };
 
 static struct miscdevice sn_hwperf_dev = {
diff -druN linux-libre-2.6.34-gnu/arch/ia64/xen/gate-data.S linux-libre-2.6.35-gnu/arch/ia64/xen/gate-data.S
--- linux-libre-2.6.34-gnu/arch/ia64/xen/gate-data.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/xen/gate-data.S	2010-08-01 18:11:14.000000000 -0400
@@ -1,3 +1,3 @@
-	.section .data.gate.xen, "aw"
+	.section .data..gate.xen, "aw"
 
 	.incbin "arch/ia64/xen/gate.so"
diff -druN linux-libre-2.6.34-gnu/arch/ia64/xen/xensetup.S linux-libre-2.6.35-gnu/arch/ia64/xen/xensetup.S
--- linux-libre-2.6.34-gnu/arch/ia64/xen/xensetup.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/ia64/xen/xensetup.S	2010-08-01 18:11:14.000000000 -0400
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <xen/interface/elfnote.h>
 
-	.section .data.read_mostly
+	.section .data..read_mostly
 	.align 8
 	.global xen_domain_type
 xen_domain_type:
diff -druN linux-libre-2.6.34-gnu/arch/Kconfig linux-libre-2.6.35-gnu/arch/Kconfig
--- linux-libre-2.6.34-gnu/arch/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -42,15 +42,10 @@
 	  If in doubt, say "N".
 
 config OPTPROBES
-	bool "Kprobes jump optimization support (EXPERIMENTAL)"
-	default y
-	depends on KPROBES
+	def_bool y
+	depends on KPROBES && HAVE_OPTPROBES
 	depends on !PREEMPT
-	depends on HAVE_OPTPROBES
 	select KALLSYMS_ALL
-	help
-	  This option will allow kprobes to optimize breakpoint to
-	  a jump for reducing its overhead.
 
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool
@@ -142,6 +137,17 @@
 	bool
 	depends on PERF_EVENTS
 
+config HAVE_MIXED_BREAKPOINTS_REGS
+	bool
+	depends on HAVE_HW_BREAKPOINT
+	help
+	  Depending on the arch implementation of hardware breakpoints,
+	  some of them have separate registers for data and instruction
+	  breakpoints addresses, others have mixed registers to store
+	  them but define the access type in a control register.
+	  Select this option if your arch implements breakpoints under the
+	  latter fashion.
+
 config HAVE_USER_RETURN_NOTIFIER
 	bool
 
diff -druN linux-libre-2.6.34-gnu/arch/m32r/include/asm/atomic.h linux-libre-2.6.35-gnu/arch/m32r/include/asm/atomic.h
--- linux-libre-2.6.34-gnu/arch/m32r/include/asm/atomic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m32r/include/asm/atomic.h	2010-08-01 18:11:14.000000000 -0400
@@ -26,7 +26,7 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)	((v)->counter)
+#define atomic_read(v)	(*(volatile int *)&(v)->counter)
 
 /**
  * atomic_set - set atomic variable
diff -druN linux-libre-2.6.34-gnu/arch/m32r/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/m32r/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/m32r/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m32r/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,20 +1,7 @@
 #ifndef _ASM_M32R_SCATTERLIST_H
 #define _ASM_M32R_SCATTERLIST_H
 
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-    unsigned long sg_magic;
-#endif
-    char *  address;    /* Location data is to be transferred to, NULL for
-                         * highmem page */
-    unsigned long page_link;
-    unsigned int offset;/* for highmem, page offset */
-
-    dma_addr_t dma_address;
-    unsigned int length;
-};
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (0x1fffffff)
 
diff -druN linux-libre-2.6.34-gnu/arch/m32r/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/m32r/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/m32r/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m32r/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -142,7 +142,7 @@
 #define TIF_RESTORE_SIGMASK	8	/* restore signal mask in do_signal() */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		18	/* OOM killer killed process */
+#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
diff -druN linux-libre-2.6.34-gnu/arch/m32r/kernel/time.c linux-libre-2.6.35-gnu/arch/m32r/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/m32r/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m32r/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -106,24 +106,6 @@
 }
 
 /*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you won't notice until after reboot!
- */
-static inline int set_rtc_mmss(unsigned long nowtime)
-{
-	return 0;
-}
-
-/* last time the cmos clock got updated */
-static long last_rtc_update = 0;
-
-/*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
@@ -138,23 +120,6 @@
 #ifndef CONFIG_SMP
 	update_process_times(user_mode(get_irq_regs()));
 #endif
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	write_seqlock(&xtime_lock);
-	if (ntp_synced()
-		&& xtime.tv_sec > last_rtc_update + 660
-		&& (xtime.tv_nsec / 1000) >= 500000 - ((unsigned)TICK_SIZE) / 2
-		&& (xtime.tv_nsec / 1000) <= 500000 + ((unsigned)TICK_SIZE) / 2)
-	{
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else	/* do it again in 60 s */
-			last_rtc_update = xtime.tv_sec - 600;
-	}
-	write_sequnlock(&xtime_lock);
 	/* As we return to user mode fire off the other CPU schedulers..
 	   this is basically because we don't yet share IRQ's around.
 	   This message is rigged to be safe on the 386 - basically it's
@@ -174,7 +139,7 @@
 	.name = "MFT2",
 };
 
-void __init time_init(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	unsigned int epoch, year, mon, day, hour, min, sec;
 
@@ -194,11 +159,13 @@
 		epoch = 1952;
 	year += epoch;
 
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
-	set_normalized_timespec(&wall_to_monotonic,
-		-xtime.tv_sec, -xtime.tv_nsec);
+	ts->tv_sec = mktime(year, mon, day, hour, min, sec);
+	ts->tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+}
+
 
+void __init time_init(void)
+{
 #if defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_XNUX2) \
 	|| defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_M32700) \
 	|| defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104)
diff -druN linux-libre-2.6.34-gnu/arch/m32r/mm/fault.c linux-libre-2.6.35-gnu/arch/m32r/mm/fault.c
--- linux-libre-2.6.34-gnu/arch/m32r/mm/fault.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m32r/mm/fault.c	2010-08-01 18:11:14.000000000 -0400
@@ -188,7 +188,6 @@
 	if ((error_code & ACE_INSTRUCTION) && !(vma->vm_flags & VM_EXEC))
 	  goto bad_area;
 
-survive:
 	/*
 	 * If for any reason at all we couldn't handle the fault,
 	 * make sure we exit gracefully rather than endlessly redo
@@ -271,15 +270,10 @@
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(tsk)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", tsk->comm);
-	if (error_code & ACE_USERMODE)
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!(error_code & ACE_USERMODE))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
diff -druN linux-libre-2.6.34-gnu/arch/m68k/amiga/config.c linux-libre-2.6.35-gnu/arch/m68k/amiga/config.c
--- linux-libre-2.6.34-gnu/arch/m68k/amiga/config.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/amiga/config.c	2010-08-01 18:11:14.000000000 -0400
@@ -97,10 +97,6 @@
 static void amiga_get_hardware_list(struct seq_file *m);
 /* amiga specific timer functions */
 static unsigned long amiga_gettimeoffset(void);
-static int a3000_hwclk(int, struct rtc_time *);
-static int a2000_hwclk(int, struct rtc_time *);
-static int amiga_set_clock_mmss(unsigned long);
-static unsigned int amiga_get_ss(void);
 extern void amiga_mksound(unsigned int count, unsigned int ticks);
 static void amiga_reset(void);
 extern void amiga_init_sound(void);
@@ -138,10 +134,6 @@
 	}
 };
 
-static struct resource rtc_resource = {
-	.start = 0x00dc0000, .end = 0x00dcffff
-};
-
 static struct resource ram_resource[NUM_MEMINFO];
 
 
@@ -387,15 +379,6 @@
 	mach_get_model       = amiga_get_model;
 	mach_get_hardware_list = amiga_get_hardware_list;
 	mach_gettimeoffset   = amiga_gettimeoffset;
-	if (AMIGAHW_PRESENT(A3000_CLK)) {
-		mach_hwclk         = a3000_hwclk;
-		rtc_resource.name = "A3000 RTC";
-		request_resource(&iomem_resource, &rtc_resource);
-	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
-		mach_hwclk         = a2000_hwclk;
-		rtc_resource.name = "A2000 RTC";
-		request_resource(&iomem_resource, &rtc_resource);
-	}
 
 	/*
 	 * default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI
@@ -404,8 +387,6 @@
 	 */
 	mach_max_dma_address = 0xffffffff;
 
-	mach_set_clock_mmss  = amiga_set_clock_mmss;
-	mach_get_ss          = amiga_get_ss;
 	mach_reset           = amiga_reset;
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
 	mach_beep            = amiga_mksound;
@@ -530,161 +511,6 @@
 	return ticks + offset;
 }
 
-static int a3000_hwclk(int op, struct rtc_time *t)
-{
-	tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-
-	if (!op) { /* read */
-		t->tm_sec  = tod_3000.second1 * 10 + tod_3000.second2;
-		t->tm_min  = tod_3000.minute1 * 10 + tod_3000.minute2;
-		t->tm_hour = tod_3000.hour1   * 10 + tod_3000.hour2;
-		t->tm_mday = tod_3000.day1    * 10 + tod_3000.day2;
-		t->tm_wday = tod_3000.weekday;
-		t->tm_mon  = tod_3000.month1  * 10 + tod_3000.month2 - 1;
-		t->tm_year = tod_3000.year1   * 10 + tod_3000.year2;
-		if (t->tm_year <= 69)
-			t->tm_year += 100;
-	} else {
-		tod_3000.second1 = t->tm_sec / 10;
-		tod_3000.second2 = t->tm_sec % 10;
-		tod_3000.minute1 = t->tm_min / 10;
-		tod_3000.minute2 = t->tm_min % 10;
-		tod_3000.hour1   = t->tm_hour / 10;
-		tod_3000.hour2   = t->tm_hour % 10;
-		tod_3000.day1    = t->tm_mday / 10;
-		tod_3000.day2    = t->tm_mday % 10;
-		if (t->tm_wday != -1)
-			tod_3000.weekday = t->tm_wday;
-		tod_3000.month1  = (t->tm_mon + 1) / 10;
-		tod_3000.month2  = (t->tm_mon + 1) % 10;
-		if (t->tm_year >= 100)
-			t->tm_year -= 100;
-		tod_3000.year1   = t->tm_year / 10;
-		tod_3000.year2   = t->tm_year % 10;
-	}
-
-	tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-
-	return 0;
-}
-
-static int a2000_hwclk(int op, struct rtc_time *t)
-{
-	int cnt = 5;
-
-	tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD;
-
-	while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
-		tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-		udelay(70);
-		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-		--cnt;
-	}
-
-	if (!cnt)
-		printk(KERN_INFO "hwclk: timed out waiting for RTC (0x%x)\n",
-			tod_2000.cntrl1);
-
-	if (!op) { /* read */
-		t->tm_sec  = tod_2000.second1     * 10 + tod_2000.second2;
-		t->tm_min  = tod_2000.minute1     * 10 + tod_2000.minute2;
-		t->tm_hour = (tod_2000.hour1 & 3) * 10 + tod_2000.hour2;
-		t->tm_mday = tod_2000.day1        * 10 + tod_2000.day2;
-		t->tm_wday = tod_2000.weekday;
-		t->tm_mon  = tod_2000.month1      * 10 + tod_2000.month2 - 1;
-		t->tm_year = tod_2000.year1       * 10 + tod_2000.year2;
-		if (t->tm_year <= 69)
-			t->tm_year += 100;
-
-		if (!(tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)) {
-			if (!(tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour == 12)
-				t->tm_hour = 0;
-			else if ((tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour != 12)
-				t->tm_hour += 12;
-		}
-	} else {
-		tod_2000.second1 = t->tm_sec / 10;
-		tod_2000.second2 = t->tm_sec % 10;
-		tod_2000.minute1 = t->tm_min / 10;
-		tod_2000.minute2 = t->tm_min % 10;
-		if (tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)
-			tod_2000.hour1 = t->tm_hour / 10;
-		else if (t->tm_hour >= 12)
-			tod_2000.hour1 = TOD2000_HOUR1_PM +
-				(t->tm_hour - 12) / 10;
-		else
-			tod_2000.hour1 = t->tm_hour / 10;
-		tod_2000.hour2   = t->tm_hour % 10;
-		tod_2000.day1    = t->tm_mday / 10;
-		tod_2000.day2    = t->tm_mday % 10;
-		if (t->tm_wday != -1)
-			tod_2000.weekday = t->tm_wday;
-		tod_2000.month1  = (t->tm_mon + 1) / 10;
-		tod_2000.month2  = (t->tm_mon + 1) % 10;
-		if (t->tm_year >= 100)
-			t->tm_year -= 100;
-		tod_2000.year1   = t->tm_year / 10;
-		tod_2000.year2   = t->tm_year % 10;
-	}
-
-	tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-
-	return 0;
-}
-
-static int amiga_set_clock_mmss(unsigned long nowtime)
-{
-	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-
-	if (AMIGAHW_PRESENT(A3000_CLK)) {
-		tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-
-		tod_3000.second1 = real_seconds / 10;
-		tod_3000.second2 = real_seconds % 10;
-		tod_3000.minute1 = real_minutes / 10;
-		tod_3000.minute2 = real_minutes % 10;
-
-		tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
-		int cnt = 5;
-
-		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-
-		while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) {
-			tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-			udelay(70);
-			tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
-			--cnt;
-		}
-
-		if (!cnt)
-			printk(KERN_INFO "set_clock_mmss: timed out waiting for RTC (0x%x)\n", tod_2000.cntrl1);
-
-		tod_2000.second1 = real_seconds / 10;
-		tod_2000.second2 = real_seconds % 10;
-		tod_2000.minute1 = real_minutes / 10;
-		tod_2000.minute2 = real_minutes % 10;
-
-		tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-	}
-
-	return 0;
-}
-
-static unsigned int amiga_get_ss(void)
-{
-	unsigned int s;
-
-	if (AMIGAHW_PRESENT(A3000_CLK)) {
-		tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD;
-		s = tod_3000.second1 * 10 + tod_3000.second2;
-		tod_3000.cntrl1 = TOD3000_CNTRL1_FREE;
-	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
-		s = tod_2000.second1 * 10 + tod_2000.second2;
-	}
-	return s;
-}
-
 static NORET_TYPE void amiga_reset(void)
     ATTRIB_NORET;
 
diff -druN linux-libre-2.6.34-gnu/arch/m68k/amiga/Makefile linux-libre-2.6.35-gnu/arch/m68k/amiga/Makefile
--- linux-libre-2.6.34-gnu/arch/m68k/amiga/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/amiga/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -2,6 +2,6 @@
 # Makefile for Linux arch/m68k/amiga source directory
 #
 
-obj-y		:= config.o amiints.o cia.o chipram.o amisound.o
+obj-y		:= config.o amiints.o cia.o chipram.o amisound.o platform.o
 
 obj-$(CONFIG_AMIGA_PCMCIA)	+= pcmcia.o
diff -druN linux-libre-2.6.34-gnu/arch/m68k/amiga/platform.c linux-libre-2.6.35-gnu/arch/m68k/amiga/platform.c
--- linux-libre-2.6.34-gnu/arch/m68k/amiga/platform.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/m68k/amiga/platform.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,197 @@
+/*
+ *  Copyright (C) 2007-2009 Geert Uytterhoeven
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/zorro.h>
+
+#include <asm/amigahw.h>
+#include <asm/amigayle.h>
+
+
+#ifdef CONFIG_ZORRO
+
+static const struct resource zorro_resources[] __initconst = {
+	/* Zorro II regions (on Zorro II/III) */
+	{
+		.name	= "Zorro II exp",
+		.start	= 0x00e80000,
+		.end	= 0x00efffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Zorro II mem",
+		.start	= 0x00200000,
+		.end	= 0x009fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* Zorro III regions (on Zorro III only) */
+	{
+		.name	= "Zorro III exp",
+		.start	= 0xff000000,
+		.end	= 0xffffffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "Zorro III cfg",
+		.start	= 0x40000000,
+		.end	= 0x7fffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+
+static int __init amiga_init_bus(void)
+{
+	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(ZORRO))
+		return -ENODEV;
+
+	platform_device_register_simple("amiga-zorro", -1, zorro_resources,
+					AMIGAHW_PRESENT(ZORRO3) ? 4 : 2);
+	return 0;
+}
+
+subsys_initcall(amiga_init_bus);
+
+
+static int z_dev_present(zorro_id id)
+{
+	unsigned int i;
+
+	for (i = 0; i < zorro_num_autocon; i++)
+		if (zorro_autocon[i].rom.er_Manufacturer == ZORRO_MANUF(id) &&
+		    zorro_autocon[i].rom.er_Product == ZORRO_PROD(id))
+			return 1;
+
+	return 0;
+}
+
+#else /* !CONFIG_ZORRO */
+
+static inline int z_dev_present(zorro_id id) { return 0; }
+
+#endif /* !CONFIG_ZORRO */
+
+
+static const struct resource a3000_scsi_resource __initconst = {
+	.start	= 0xdd0000,
+	.end	= 0xdd00ff,
+	.flags	= IORESOURCE_MEM,
+};
+
+
+static const struct resource a4000t_scsi_resource __initconst = {
+	.start	= 0xdd0000,
+	.end	= 0xdd0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+
+static const struct resource a1200_ide_resource __initconst = {
+	.start	= 0xda0000,
+	.end	= 0xda1fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static const struct gayle_ide_platform_data a1200_ide_pdata __initconst = {
+	.base		= 0xda0000,
+	.irqport	= 0xda9000,
+	.explicit_ack	= 1,
+};
+
+
+static const struct resource a4000_ide_resource __initconst = {
+	.start	= 0xdd2000,
+	.end	= 0xdd3fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static const struct gayle_ide_platform_data a4000_ide_pdata __initconst = {
+	.base		= 0xdd2020,
+	.irqport	= 0xdd3020,
+	.explicit_ack	= 0,
+};
+
+
+static const struct resource amiga_rtc_resource __initconst = {
+	.start	= 0x00dc0000,
+	.end	= 0x00dcffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+
+static int __init amiga_init_devices(void)
+{
+	struct platform_device *pdev;
+
+	if (!MACH_IS_AMIGA)
+		return -ENODEV;
+
+	/* video hardware */
+	if (AMIGAHW_PRESENT(AMI_VIDEO))
+		platform_device_register_simple("amiga-video", -1, NULL, 0);
+
+
+	/* sound hardware */
+	if (AMIGAHW_PRESENT(AMI_AUDIO))
+		platform_device_register_simple("amiga-audio", -1, NULL, 0);
+
+
+	/* storage interfaces */
+	if (AMIGAHW_PRESENT(AMI_FLOPPY))
+		platform_device_register_simple("amiga-floppy", -1, NULL, 0);
+
+	if (AMIGAHW_PRESENT(A3000_SCSI))
+		platform_device_register_simple("amiga-a3000-scsi", -1,
+						&a3000_scsi_resource, 1);
+
+	if (AMIGAHW_PRESENT(A4000_SCSI))
+		platform_device_register_simple("amiga-a4000t-scsi", -1,
+						&a4000t_scsi_resource, 1);
+
+	if (AMIGAHW_PRESENT(A1200_IDE) ||
+	    z_dev_present(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE)) {
+		pdev = platform_device_register_simple("amiga-gayle-ide", -1,
+						       &a1200_ide_resource, 1);
+		platform_device_add_data(pdev, &a1200_ide_pdata,
+					 sizeof(a1200_ide_pdata));
+	}
+
+	if (AMIGAHW_PRESENT(A4000_IDE)) {
+		pdev = platform_device_register_simple("amiga-gayle-ide", -1,
+						       &a4000_ide_resource, 1);
+		platform_device_add_data(pdev, &a4000_ide_pdata,
+					 sizeof(a4000_ide_pdata));
+	}
+
+
+	/* other I/O hardware */
+	if (AMIGAHW_PRESENT(AMI_KEYBOARD))
+		platform_device_register_simple("amiga-keyboard", -1, NULL, 0);
+
+	if (AMIGAHW_PRESENT(AMI_MOUSE))
+		platform_device_register_simple("amiga-mouse", -1, NULL, 0);
+
+	if (AMIGAHW_PRESENT(AMI_SERIAL))
+		platform_device_register_simple("amiga-serial", -1, NULL, 0);
+
+	if (AMIGAHW_PRESENT(AMI_PARALLEL))
+		platform_device_register_simple("amiga-parallel", -1, NULL, 0);
+
+
+	/* real time clocks */
+	if (AMIGAHW_PRESENT(A2000_CLK))
+		platform_device_register_simple("rtc-msm6242", -1,
+						&amiga_rtc_resource, 1);
+
+	if (AMIGAHW_PRESENT(A3000_CLK))
+		platform_device_register_simple("rtc-rp5c01", -1,
+						&amiga_rtc_resource, 1);
+
+	return 0;
+}
+
+device_initcall(amiga_init_devices);
diff -druN linux-libre-2.6.34-gnu/arch/m68k/bvme6000/rtc.c linux-libre-2.6.35-gnu/arch/m68k/bvme6000/rtc.c
--- linux-libre-2.6.34-gnu/arch/m68k/bvme6000/rtc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/bvme6000/rtc.c	2010-08-01 18:11:14.000000000 -0400
@@ -9,7 +9,6 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
 #include <linux/ioport.h>
 #include <linux/capability.h>
 #include <linux/fcntl.h>
@@ -35,10 +34,9 @@
 static unsigned char days_in_mo[] =
 {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
 
-static char rtc_status;
+static atomic_t rtc_status = ATOMIC_INIT(1);
 
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
+static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
 	unsigned char msr;
@@ -132,29 +130,20 @@
 }
 
 /*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
+ * We enforce only one user at a time here with the open/close.
  */
-
 static int rtc_open(struct inode *inode, struct file *file)
 {
-	lock_kernel();
-	if(rtc_status) {
-		unlock_kernel();
+	if (!atomic_dec_and_test(&rtc_status)) {
+		atomic_inc(&rtc_status);
 		return -EBUSY;
 	}
-
-	rtc_status = 1;
-	unlock_kernel();
 	return 0;
 }
 
 static int rtc_release(struct inode *inode, struct file *file)
 {
-	lock_kernel();
-	rtc_status = 0;
-	unlock_kernel();
+	atomic_inc(&rtc_status);
 	return 0;
 }
 
@@ -163,9 +152,9 @@
  */
 
 static const struct file_operations rtc_fops = {
-	.ioctl =	rtc_ioctl,
-	.open =		rtc_open,
-	.release =	rtc_release,
+	.unlocked_ioctl	= rtc_ioctl,
+	.open		= rtc_open,
+	.release	= rtc_release,
 };
 
 static struct miscdevice rtc_dev = {
diff -druN linux-libre-2.6.34-gnu/arch/m68k/hp300/time.h linux-libre-2.6.35-gnu/arch/m68k/hp300/time.h
--- linux-libre-2.6.34-gnu/arch/m68k/hp300/time.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/hp300/time.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,4 +1,2 @@
 extern void hp300_sched_init(irq_handler_t vector);
-extern unsigned long hp300_gettimeoffset (void);
-
-
+extern unsigned long hp300_gettimeoffset(void);
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/amigayle.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/amigayle.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/amigayle.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/amigayle.h	2010-08-01 18:11:14.000000000 -0400
@@ -104,4 +104,10 @@
 #define GAYLE_CFG_250NS		0x00
 #define GAYLE_CFG_720NS		0x0c
 
+struct gayle_ide_platform_data {
+	unsigned long base;
+	unsigned long irqport;
+	int explicit_ack;	/* A1200 IDE needs explicit ack */
+};
+
 #endif /* asm-m68k/amigayle.h */
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/atomic.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/atomic.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/atomic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/atomic.h	2010-08-01 18:11:14.000000000 -0400
@@ -3,3 +3,5 @@
 #else
 #include "atomic_mm.h"
 #endif
+
+#include <asm-generic/atomic64.h>
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/atomic_mm.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/atomic_mm.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/atomic_mm.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/atomic_mm.h	2010-08-01 18:11:14.000000000 -0400
@@ -15,7 +15,7 @@
 
 #define ATOMIC_INIT(i)	{ (i) }
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = i)
 
 static inline void atomic_add(int i, atomic_t *v)
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/atomic_no.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/atomic_no.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/atomic_no.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/atomic_no.h	2010-08-01 18:11:14.000000000 -0400
@@ -15,7 +15,7 @@
 
 #define ATOMIC_INIT(i)	{ (i) }
 
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)	(((v)->counter) = i)
 
 static __inline__ void atomic_add(int i, atomic_t *v)
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/bitops_mm.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/bitops_mm.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/bitops_mm.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/bitops_mm.h	2010-08-01 18:11:14.000000000 -0400
@@ -365,6 +365,10 @@
 #define ext2_set_bit_atomic(lock, nr, addr)	test_and_set_bit((nr) ^ 24, (unsigned long *)(addr))
 #define ext2_clear_bit(nr, addr)		__test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
 #define ext2_clear_bit_atomic(lock, nr, addr)	test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
+#define ext2_find_next_zero_bit(addr, size, offset) \
+	generic_find_next_zero_le_bit((unsigned long *)addr, size, offset)
+#define ext2_find_next_bit(addr, size, offset) \
+	generic_find_next_le_bit((unsigned long *)addr, size, offset)
 
 static inline int ext2_test_bit(int nr, const void *vaddr)
 {
@@ -394,10 +398,9 @@
 	return (p - addr) * 32 + res;
 }
 
-static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size,
-					  unsigned offset)
+static inline unsigned long generic_find_next_zero_le_bit(const unsigned long *addr,
+		unsigned long size, unsigned long offset)
 {
-	const unsigned long *addr = vaddr;
 	const unsigned long *p = addr + (offset >> 5);
 	int bit = offset & 31UL, res;
 
@@ -437,10 +440,9 @@
 	return (p - addr) * 32 + res;
 }
 
-static inline int ext2_find_next_bit(const void *vaddr, unsigned size,
-				     unsigned offset)
+static inline unsigned long generic_find_next_le_bit(const unsigned long *addr,
+		unsigned long size, unsigned long offset)
 {
-	const unsigned long *addr = vaddr;
 	const unsigned long *p = addr + (offset >> 5);
 	int bit = offset & 31UL, res;
 
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/cache.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/cache.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/cache.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/cache.h	2010-08-01 18:11:14.000000000 -0400
@@ -8,4 +8,6 @@
 #define        L1_CACHE_SHIFT  4
 #define        L1_CACHE_BYTES  (1<< L1_CACHE_SHIFT)
 
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/m520xsim.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/m520xsim.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/m520xsim.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/m520xsim.h	2010-08-01 18:11:14.000000000 -0400
@@ -113,6 +113,7 @@
 
 #define MCF_GPIO_PAR_UART                   (0xA4036)
 #define MCF_GPIO_PAR_FECI2C                 (0xA4033)
+#define MCF_GPIO_PAR_QSPI                   (0xA4034)
 #define MCF_GPIO_PAR_FEC                    (0xA4038)
 
 #define MCF_GPIO_PAR_UART_PAR_URXD0         (0x0001)
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/m523xsim.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/m523xsim.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/m523xsim.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/m523xsim.h	2010-08-01 18:11:14.000000000 -0400
@@ -127,5 +127,10 @@
 #define MCFGPIO_IRQ_MAX			8
 #define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
 
+/*
+ * Pin Assignment
+*/
+#define	MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10004A)
+#define	MCFGPIO_PAR_TIMER	(MCF_IPSBAR + 0x10004C)
 /****************************************************************************/
 #endif	/* m523xsim_h */
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/m5249sim.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/m5249sim.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/m5249sim.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/m5249sim.h	2010-08-01 18:11:14.000000000 -0400
@@ -69,10 +69,12 @@
 #define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
 #define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
 #define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+#define	MCFSIM_QSPIICR		MCFSIM_ICR10	/* QSPI ICR */
 
 /*
  *	Define system peripheral IRQ usage.
  */
+#define	MCF_IRQ_QSPI		28		/* QSPI, Level 4 */
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
 
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/m527xsim.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/m527xsim.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/m527xsim.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/m527xsim.h	2010-08-01 18:11:14.000000000 -0400
@@ -31,6 +31,7 @@
 #define	MCFINT_UART0		13		/* Interrupt number for UART0 */
 #define	MCFINT_UART1		14		/* Interrupt number for UART1 */
 #define	MCFINT_UART2		15		/* Interrupt number for UART2 */
+#define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
 #define	MCFINT_PIT1		36		/* Interrupt number for PIT1 */
 
 /*
@@ -120,6 +121,9 @@
 #define MCFGPIO_PIN_MAX			100
 #define MCFGPIO_IRQ_MAX			8
 #define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+
+#define MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10004A)
+#define MCFGPIO_PAR_TIMER	(MCF_IPSBAR + 0x10004C)
 #endif
 
 #ifdef CONFIG_M5275
@@ -212,6 +216,8 @@
 #define MCFGPIO_PIN_MAX			148
 #define MCFGPIO_IRQ_MAX			8
 #define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+
+#define MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10007E)
 #endif
 
 /*
@@ -223,6 +229,7 @@
 #define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x130005)
 
 
+
 /*
  *	GPIO pins setups to enable the UARTs.
  */
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/m528xsim.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/m528xsim.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/m528xsim.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/m528xsim.h	2010-08-01 18:11:14.000000000 -0400
@@ -29,6 +29,7 @@
 
 #define	MCFINT_VECBASE		64		/* Vector base number */
 #define	MCFINT_UART0		13		/* Interrupt number for UART0 */
+#define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
 #define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
 
 /*
@@ -249,70 +250,4 @@
 #define MCF5282_I2C_I2SR_RXAK   (0x01)  // received acknowledge
 
 
-
-/*********************************************************************
-*
-* Queued Serial Peripheral Interface (QSPI) Module
-*
-*********************************************************************/
-/* Derek - 21 Feb 2005 */
-/* change to the format used in I2C */
-/* Read/Write access macros for general use */
-#define MCF5282_QSPI_QMR        MCF_IPSBAR + 0x0340
-#define MCF5282_QSPI_QDLYR      MCF_IPSBAR + 0x0344
-#define MCF5282_QSPI_QWR        MCF_IPSBAR + 0x0348
-#define MCF5282_QSPI_QIR        MCF_IPSBAR + 0x034C
-#define MCF5282_QSPI_QAR        MCF_IPSBAR + 0x0350
-#define MCF5282_QSPI_QDR        MCF_IPSBAR + 0x0354
-#define MCF5282_QSPI_QCR        MCF_IPSBAR + 0x0354
-
-/* Bit level definitions and macros */
-#define MCF5282_QSPI_QMR_MSTR                           (0x8000)
-#define MCF5282_QSPI_QMR_DOHIE                          (0x4000)
-#define MCF5282_QSPI_QMR_BITS_16                        (0x0000)
-#define MCF5282_QSPI_QMR_BITS_8                         (0x2000)
-#define MCF5282_QSPI_QMR_BITS_9                         (0x2400)
-#define MCF5282_QSPI_QMR_BITS_10                        (0x2800)
-#define MCF5282_QSPI_QMR_BITS_11                        (0x2C00)
-#define MCF5282_QSPI_QMR_BITS_12                        (0x3000)
-#define MCF5282_QSPI_QMR_BITS_13                        (0x3400)
-#define MCF5282_QSPI_QMR_BITS_14                        (0x3800)
-#define MCF5282_QSPI_QMR_BITS_15                        (0x3C00)
-#define MCF5282_QSPI_QMR_CPOL                           (0x0200)
-#define MCF5282_QSPI_QMR_CPHA                           (0x0100)
-#define MCF5282_QSPI_QMR_BAUD(x)                        (((x)&0x00FF))
-
-#define MCF5282_QSPI_QDLYR_SPE                          (0x80)
-#define MCF5282_QSPI_QDLYR_QCD(x)                       (((x)&0x007F)<<8)
-#define MCF5282_QSPI_QDLYR_DTL(x)                       (((x)&0x00FF))
-
-#define MCF5282_QSPI_QWR_HALT                           (0x8000)
-#define MCF5282_QSPI_QWR_WREN                           (0x4000)
-#define MCF5282_QSPI_QWR_WRTO                           (0x2000)
-#define MCF5282_QSPI_QWR_CSIV                           (0x1000)
-#define MCF5282_QSPI_QWR_ENDQP(x)                       (((x)&0x000F)<<8)
-#define MCF5282_QSPI_QWR_CPTQP(x)                       (((x)&0x000F)<<4)
-#define MCF5282_QSPI_QWR_NEWQP(x)                       (((x)&0x000F))
-
-#define MCF5282_QSPI_QIR_WCEFB                          (0x8000)
-#define MCF5282_QSPI_QIR_ABRTB                          (0x4000)
-#define MCF5282_QSPI_QIR_ABRTL                          (0x1000)
-#define MCF5282_QSPI_QIR_WCEFE                          (0x0800)
-#define MCF5282_QSPI_QIR_ABRTE                          (0x0400)
-#define MCF5282_QSPI_QIR_SPIFE                          (0x0100)
-#define MCF5282_QSPI_QIR_WCEF                           (0x0008)
-#define MCF5282_QSPI_QIR_ABRT                           (0x0004)
-#define MCF5282_QSPI_QIR_SPIF                           (0x0001)
-
-#define MCF5282_QSPI_QAR_ADDR(x)                        (((x)&0x003F))
-
-#define MCF5282_QSPI_QDR_COMMAND(x)                     (((x)&0xFF00))
-#define MCF5282_QSPI_QCR_DATA(x)                        (((x)&0x00FF)<<8)
-#define MCF5282_QSPI_QCR_CONT                           (0x8000)
-#define MCF5282_QSPI_QCR_BITSE                          (0x4000)
-#define MCF5282_QSPI_QCR_DT                             (0x2000)
-#define MCF5282_QSPI_QCR_DSCK                           (0x1000)
-#define MCF5282_QSPI_QCR_CS                             (((x)&0x000F)<<8)
-
-/****************************************************************************/
 #endif	/* m528xsim_h */
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/m532xsim.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/m532xsim.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/m532xsim.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/m532xsim.h	2010-08-01 18:11:14.000000000 -0400
@@ -17,6 +17,7 @@
 #define MCFINT_UART0        26          /* Interrupt number for UART0 */
 #define MCFINT_UART1        27          /* Interrupt number for UART1 */
 #define MCFINT_UART2        28          /* Interrupt number for UART2 */
+#define MCFINT_QSPI         31          /* Interrupt number for QSPI */
 
 #define MCF_WTM_WCR	MCF_REG16(0xFC098000)
 
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/mcfqspi.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/mcfqspi.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/mcfqspi.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/mcfqspi.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,64 @@
+/*
+ * Definitions for Freescale Coldfire QSPI module
+ *
+ * Copyright 2010 Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+*/
+
+#ifndef mcfqspi_h
+#define mcfqspi_h
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define	MCFQSPI_IOBASE		(MCF_IPSBAR + 0x340)
+#elif defined(CONFIG_M5249)
+#define MCFQSPI_IOBASE		(MCF_MBAR + 0x300)
+#elif defined(CONFIG_M520x) || defined(CONFIG_M532x)
+#define MCFQSPI_IOBASE		0xFC058000
+#endif
+#define MCFQSPI_IOSIZE		0x40
+
+/**
+ * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver
+ * @setup: setup the control; allocate gpio's, etc. May be NULL.
+ * @teardown: finish with the control; free gpio's, etc. May be NULL.
+ * @select: output the signals to select the device.  Can not be NULL.
+ * @deselect: output the signals to deselect the device. Can not be NULL.
+ *
+ * The QSPI module has 4 hardware chip selects.  We don't use them.  Instead
+ * platforms are required to supply a mcfqspi_cs_control as a part of the
+ * platform data for each QSPI master controller.  Only the select and
+ * deselect functions are required.
+*/
+struct mcfqspi_cs_control {
+	int 	(*setup)(struct mcfqspi_cs_control *);
+	void	(*teardown)(struct mcfqspi_cs_control *);
+	void	(*select)(struct mcfqspi_cs_control *, u8, bool);
+	void	(*deselect)(struct mcfqspi_cs_control *, u8, bool);
+};
+
+/**
+ * struct mcfqspi_platform_data - platform data for the coldfire qspi driver
+ * @bus_num: board specific identifier for this qspi driver.
+ * @num_chipselects: number of chip selects supported by this qspi driver.
+ * @cs_control: platform dependent chip select control.
+*/
+struct mcfqspi_platform_data {
+	s16	bus_num;
+	u16	num_chipselect;
+	struct mcfqspi_cs_control *cs_control;
+};
+
+#endif /* mcfqspi_h */
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/mcfsmc.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/mcfsmc.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/mcfsmc.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/mcfsmc.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,187 +0,0 @@
-/****************************************************************************/
-
-/*
- *	mcfsmc.h -- SMC ethernet support for ColdFire environments.
- *
- *	(C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
- *	(C) Copyright 2000, Lineo Inc. (www.lineo.com) 
- */
-
-/****************************************************************************/
-#ifndef	mcfsmc_h
-#define	mcfsmc_h
-/****************************************************************************/
-
-/*
- *	None of the current ColdFire targets that use the SMC91x111
- *	allow 8 bit accesses. So this code is 16bit access only.
- */
-
-
-#undef	outb
-#undef	inb
-#undef	outw
-#undef	outwd
-#undef	inw	
-#undef	outl
-#undef	inl
-
-#undef	outsb
-#undef	outsw
-#undef	outsl
-#undef	insb
-#undef	insw
-#undef	insl
-
-/*
- *	Re-defines for ColdFire environment... The SMC part is
- *	mapped into memory space, so remap the PC-style in/out
- *	routines to handle that.
- */
-#define	outb	smc_outb
-#define	inb	smc_inb
-#define	outw	smc_outw
-#define	outwd	smc_outwd
-#define	inw	smc_inw
-#define	outl	smc_outl
-#define	inl	smc_inl
-
-#define	outsb	smc_outsb
-#define	outsw	smc_outsw
-#define	outsl	smc_outsl
-#define	insb	smc_insb
-#define	insw	smc_insw
-#define	insl	smc_insl
-
-
-static inline int smc_inb(unsigned int addr)
-{
-	register unsigned short	w;
-	w = *((volatile unsigned short *) (addr & ~0x1));
-	return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
-}
-
-static inline void smc_outw(unsigned int val, unsigned int addr)
-{
-	*((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
-}
-
-static inline int smc_inw(unsigned int addr)
-{
-	register unsigned short	w;
-	w = *((volatile unsigned short *) addr);
-	return(((w << 8) | (w >> 8)) & 0xffff);
-}
-
-static inline void smc_outl(unsigned long val, unsigned int addr)
-{
-	*((volatile unsigned long *) addr) = 
-		((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
-		((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
-}
-
-static inline void smc_outwd(unsigned int val, unsigned int addr)
-{
-	*((volatile unsigned short *) addr) = val;
-}
-
-
-/*
- *	The rep* functions are used to feed the data port with
- *	raw data. So we do not byte swap them when copying.
- */
-
-static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		*buf, *ebuf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) addr;
-
-	/* Copy as words for as long as possible */
-	for (ebuf = buf + (len >> 1); (buf < ebuf); )
-		*buf++ = *rp;
-
-	/* Lastly, handle left over byte */
-	if (len & 0x1)
-		*((unsigned char *) buf) = (*rp >> 8) & 0xff;
-}
-
-static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		*buf, *ebuf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*buf++ = *rp;
-}
-
-static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned long	*rp;
-	unsigned long		*buf, *ebuf;
-
-	buf = (unsigned long *) vbuf;
-	rp = (volatile unsigned long *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*buf++ = *rp;
-}
-
-static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
-	volatile unsigned short	*rp;
-	unsigned short		*buf, *ebuf;
-
-	buf = (unsigned short *) vbuf;
-	rp = (volatile unsigned short *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*rp = *buf++;
-}
-
-static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
-{
-	volatile unsigned long	*rp;
-	unsigned long		*buf, *ebuf;
-
-	buf = (unsigned long *) vbuf;
-	rp = (volatile unsigned long *) addr;
-	for (ebuf = buf + len; (buf < ebuf); )
-		*rp = *buf++;
-}
-
-
-#ifdef CONFIG_NETtel
-/*
- *	Re-map the address space of at least one of the SMC ethernet
- *	parts. Both parts power up decoding the same address, so we
- *	need to move one of them first, before doing enything else.
- *
- *	We also increase the number of wait states for this part by one.
- */
-
-void smc_remap(unsigned int ioaddr)
-{
-	static int		once = 0;
-	extern unsigned short	ppdata;
-	if (once++ == 0) {
-		*((volatile unsigned short *)MCFSIM_PADDR) = 0x00ec;
-		ppdata |= 0x0080;
-		*((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
-		outw(0x0001, ioaddr + BANK_SELECT);
-		outw(0x0001, ioaddr + BANK_SELECT);
-		outw(0x0067, ioaddr + BASE);
-
-		ppdata &= ~0x0080;
-		*((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
-	}
-	
-	*((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
-}
-
-#endif
-
-/****************************************************************************/
-#endif	/* mcfsmc_h */
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/param.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/param.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/param.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/param.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,26 +1,12 @@
 #ifndef _M68K_PARAM_H
 #define _M68K_PARAM_H
 
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
 #ifdef __uClinux__
 #define EXEC_PAGESIZE	4096
 #else
 #define EXEC_PAGESIZE	8192
 #endif
 
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#include <asm-generic/param.h>
 
 #endif /* _M68K_PARAM_H */
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/processor.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/processor.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/processor.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/processor.h	2010-08-01 18:11:14.000000000 -0400
@@ -44,11 +44,15 @@
  * User space process size: 3.75GB. This is hardcoded into a few places,
  * so don't change it unless you know what you are doing.
  */
+#ifdef CONFIG_MMU
 #ifndef CONFIG_SUN3
 #define TASK_SIZE	(0xF0000000UL)
 #else
 #define TASK_SIZE	(0x0E000000UL)
 #endif
+#else
+#define TASK_SIZE	(0xFFFFFFFFUL)
+#endif
 
 #ifdef __KERNEL__
 #define STACK_TOP	TASK_SIZE
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,23 +1,9 @@
 #ifndef _M68K_SCATTERLIST_H
 #define _M68K_SCATTERLIST_H
 
-#include <linux/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-	unsigned int length;
-
-	dma_addr_t dma_address;	/* A place to hang host-specific addresses at. */
-};
+#include <asm-generic/scatterlist.h>
 
 /* This is bogus and should go away. */
 #define ISA_DMA_THRESHOLD (0x00ffffff)
 
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
-
 #endif /* !(_M68K_SCATTERLIST_H) */
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/thread_info_mm.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/thread_info_mm.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/thread_info_mm.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/thread_info_mm.h	2010-08-01 18:11:14.000000000 -0400
@@ -65,7 +65,7 @@
 #define TIF_NEED_RESCHED	7	/* rescheduling necessary */
 #define TIF_DELAYED_TRACE	14	/* single step a syscall */
 #define TIF_SYSCALL_TRACE	15	/* syscall trace active */
-#define TIF_MEMDIE		16
+#define TIF_MEMDIE		16	/* is terminating due to OOM killer */
 #define TIF_FREEZE		17	/* thread is freezing for suspend */
 
 #endif	/* _ASM_M68K_THREAD_INFO_H */
diff -druN linux-libre-2.6.34-gnu/arch/m68k/include/asm/thread_info_no.h linux-libre-2.6.35-gnu/arch/m68k/include/asm/thread_info_no.h
--- linux-libre-2.6.34-gnu/arch/m68k/include/asm/thread_info_no.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/include/asm/thread_info_no.h	2010-08-01 18:11:14.000000000 -0400
@@ -85,7 +85,7 @@
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
 					   TIF_NEED_RESCHED */
-#define TIF_MEMDIE		4
+#define TIF_MEMDIE		4	/* is terminating due to OOM killer */
 #define TIF_FREEZE		16	/* is freezing for suspend */
 
 /* as above, but as bit values */
diff -druN linux-libre-2.6.34-gnu/arch/m68k/Kconfig linux-libre-2.6.35-gnu/arch/m68k/Kconfig
--- linux-libre-2.6.34-gnu/arch/m68k/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -7,6 +7,7 @@
 	default y
 	select HAVE_AOUT
 	select HAVE_IDE
+	select GENERIC_ATOMIC64
 
 config MMU
 	bool
diff -druN linux-libre-2.6.34-gnu/arch/m68k/kernel/time.c linux-libre-2.6.35-gnu/arch/m68k/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/m68k/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -73,21 +73,24 @@
 	return IRQ_HANDLED;
 }
 
-void __init time_init(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	struct rtc_time time;
+	ts->tv_sec = 0;
+	ts->tv_nsec = 0;
 
 	if (mach_hwclk) {
 		mach_hwclk(0, &time);
 
 		if ((time.tm_year += 1900) < 1970)
 			time.tm_year += 100;
-		xtime.tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
+		ts->tv_sec = mktime(time.tm_year, time.tm_mon, time.tm_mday,
 				      time.tm_hour, time.tm_min, time.tm_sec);
-		xtime.tv_nsec = 0;
 	}
-	wall_to_monotonic.tv_sec = -xtime.tv_sec;
+}
 
+void __init time_init(void)
+{
 	mach_sched_init(timer_interrupt);
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/m68k/kernel/traps.c linux-libre-2.6.35-gnu/arch/m68k/kernel/traps.c
--- linux-libre-2.6.34-gnu/arch/m68k/kernel/traps.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/kernel/traps.c	2010-08-01 18:11:14.000000000 -0400
@@ -455,7 +455,7 @@
 
 		if (do_page_fault(&fp->ptregs, addr, errorcode)) {
 #ifdef DEBUG
-		        printk("do_page_fault() !=0 \n");
+			printk("do_page_fault() !=0\n");
 #endif
 			if (user_mode(&fp->ptregs)){
 				/* delay writebacks after signal delivery */
diff -druN linux-libre-2.6.34-gnu/arch/m68k/mac/config.c linux-libre-2.6.35-gnu/arch/m68k/mac/config.c
--- linux-libre-2.6.34-gnu/arch/m68k/mac/config.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/mac/config.c	2010-08-01 18:11:14.000000000 -0400
@@ -148,7 +148,7 @@
 void __init config_mac(void)
 {
 	if (!MACH_IS_MAC)
-		printk(KERN_ERR "ERROR: no Mac, but config_mac() called!! \n");
+		printk(KERN_ERR "ERROR: no Mac, but config_mac() called!!\n");
 
 	mach_sched_init = mac_sched_init;
 	mach_init_IRQ = mac_init_IRQ;
@@ -867,7 +867,7 @@
 	 */
 	iop_preinit();
 
-	printk(KERN_INFO "Detected Macintosh model: %d \n", model);
+	printk(KERN_INFO "Detected Macintosh model: %d\n", model);
 
 	/*
 	 * Report booter data:
@@ -878,12 +878,12 @@
 		mac_bi_data.videoaddr, mac_bi_data.videorow,
 		mac_bi_data.videodepth, mac_bi_data.dimensions & 0xFFFF,
 		mac_bi_data.dimensions >> 16);
-	printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx \n",
+	printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx\n",
 		mac_bi_data.videological, mac_orig_videoaddr,
 		mac_bi_data.sccbase);
-	printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx \n",
+	printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx\n",
 		mac_bi_data.boottime, mac_bi_data.gmtbias);
-	printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx \n",
+	printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx\n",
 		mac_bi_data.id, mac_bi_data.cpuid, mac_bi_data.memsize);
 
 	iop_init();
diff -druN linux-libre-2.6.34-gnu/arch/m68k/mm/fault.c linux-libre-2.6.35-gnu/arch/m68k/mm/fault.c
--- linux-libre-2.6.34-gnu/arch/m68k/mm/fault.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/mm/fault.c	2010-08-01 18:11:14.000000000 -0400
@@ -154,7 +154,6 @@
 	 * the fault.
 	 */
 
- survive:
 	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
 #ifdef DEBUG
 	printk("handle_mm_fault returns %d\n",fault);
@@ -180,15 +179,10 @@
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
+	return 0;
 
 no_context:
 	current->thread.signo = SIGBUS;
diff -druN linux-libre-2.6.34-gnu/arch/m68k/mvme16x/rtc.c linux-libre-2.6.35-gnu/arch/m68k/mvme16x/rtc.c
--- linux-libre-2.6.34-gnu/arch/m68k/mvme16x/rtc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/mvme16x/rtc.c	2010-08-01 18:11:14.000000000 -0400
@@ -9,7 +9,6 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
 #include <linux/ioport.h>
 #include <linux/capability.h>
 #include <linux/fcntl.h>
@@ -36,8 +35,7 @@
 
 static atomic_t rtc_ready = ATOMIC_INIT(1);
 
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-		     unsigned long arg)
+static long rtc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	volatile MK48T08ptr_t rtc = (MK48T08ptr_t)MVME_RTC_BASE;
 	unsigned long flags;
@@ -120,22 +118,15 @@
 }
 
 /*
- *	We enforce only one user at a time here with the open/close.
- *	Also clear the previous interrupt data on an open, and clean
- *	up things on a close.
+ * We enforce only one user at a time here with the open/close.
  */
-
 static int rtc_open(struct inode *inode, struct file *file)
 {
-	lock_kernel();
 	if( !atomic_dec_and_test(&rtc_ready) )
 	{
 		atomic_inc( &rtc_ready );
-		unlock_kernel();
 		return -EBUSY;
 	}
-	unlock_kernel();
-
 	return 0;
 }
 
@@ -150,9 +141,9 @@
  */
 
 static const struct file_operations rtc_fops = {
-	.ioctl =	rtc_ioctl,
-	.open =		rtc_open,
-	.release =	rtc_release,
+	.unlocked_ioctl	= rtc_ioctl,
+	.open		= rtc_open,
+	.release	= rtc_release,
 };
 
 static struct miscdevice rtc_dev=
diff -druN linux-libre-2.6.34-gnu/arch/m68k/q40/config.c linux-libre-2.6.35-gnu/arch/m68k/q40/config.c
--- linux-libre-2.6.34-gnu/arch/m68k/q40/config.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68k/q40/config.c	2010-08-01 18:11:14.000000000 -0400
@@ -126,7 +126,7 @@
 {
         halted = 1;
         printk("\n\n*******************************************\n"
-		"Called q40_reset : press the RESET button!! \n"
+		"Called q40_reset : press the RESET button!!\n"
 		"*******************************************\n");
 	Q40_LED_ON();
 	while (1)
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/Kconfig linux-libre-2.6.35-gnu/arch/m68knommu/Kconfig
--- linux-libre-2.6.34-gnu/arch/m68knommu/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -566,7 +566,7 @@
 	  processor address space.
 
 config RAMSIZE
-	hex "Size of RAM (in bytes)"
+	hex "Size of RAM (in bytes), or 0 for automatic"
 	default "0x400000"
 	help
 	  Define the size of the system RAM. If you select 0 then the
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/kernel/vmlinux.lds.S linux-libre-2.6.35-gnu/arch/m68knommu/kernel/vmlinux.lds.S
--- linux-libre-2.6.34-gnu/arch/m68knommu/kernel/vmlinux.lds.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/kernel/vmlinux.lds.S	2010-08-01 18:11:14.000000000 -0400
@@ -57,7 +57,7 @@
 	.romvec : {
 		__rom_start = . ;
 		_romvec = .;
-		*(.data.initvect)
+		*(.data..initvect)
 	} > romvec
 #endif
 
@@ -68,7 +68,7 @@
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
-        	*(.text.lock)
+		*(.text..lock)
 
 		. = ALIGN(16);          /* Exception table              */
 		__start___ex_table = .;
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/mm/fault.c linux-libre-2.6.35-gnu/arch/m68knommu/mm/fault.c
--- linux-libre-2.6.34-gnu/arch/m68knommu/mm/fault.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/mm/fault.c	2010-08-01 18:11:14.000000000 -0400
@@ -2,7 +2,7 @@
  *  linux/arch/m68knommu/mm/fault.c
  *
  *  Copyright (C) 1998  D. Jeff Dionne <jeff@lineo.ca>,
- *  Copyright (C) 2000  Lineo, Inc.  (www.lineo.com) 
+ *  Copyright (C) 2000  Lineo, Inc.  (www.lineo.com)
  *
  *  Based on:
  *
@@ -36,7 +36,7 @@
 			      unsigned long error_code)
 {
 #ifdef DEBUG
-	printk (KERN_DEBUG "regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
+	printk(KERN_DEBUG "regs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld\n",
 		regs->sr, regs->pc, address, error_code);
 #endif
 
@@ -44,11 +44,11 @@
 	 * Oops. The kernel tried to access some bad page. We'll have to
 	 * terminate things with extreme prejudice.
 	 */
-	if ((unsigned long) address < PAGE_SIZE) {
+	if ((unsigned long) address < PAGE_SIZE)
 		printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
-	} else
+	else
 		printk(KERN_ALERT "Unable to handle kernel access");
-	printk(KERN_ALERT " at virtual address %08lx\n",address);
+	printk(KERN_ALERT " at virtual address %08lx\n", address);
 	die_if_kernel("Oops", regs, error_code);
 	do_exit(SIGKILL);
 
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/platform/520x/config.c linux-libre-2.6.35-gnu/arch/m68knommu/platform/520x/config.c
--- linux-libre-2.6.34-gnu/arch/m68knommu/platform/520x/config.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/platform/520x/config.c	2010-08-01 18:11:14.000000000 -0400
@@ -15,10 +15,13 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -74,9 +77,152 @@
 	.resource		= m520x_fec_resources,
 };
 
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m520x_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINT_VECBASE + MCFINT_QSPI,
+		.end		= MCFINT_VECBASE + MCFINT_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#define MCFQSPI_CS0    62
+#define MCFQSPI_CS1    63
+#define MCFQSPI_CS2    44
+
+static int m520x_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	return 0;
+
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m520x_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m520x_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, cs_high);
+		break;
+	}
+}
+
+static void m520x_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, !cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, !cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, !cs_high);
+		break;
+	}
+}
+
+static struct mcfqspi_cs_control m520x_cs_control = {
+	.setup                  = m520x_cs_setup,
+	.teardown               = m520x_cs_teardown,
+	.select                 = m520x_cs_select,
+	.deselect               = m520x_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m520x_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 3,
+	.cs_control		= &m520x_cs_control,
+};
+
+static struct platform_device m520x_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m520x_qspi_resources),
+	.resource		= m520x_qspi_resources,
+	.dev.platform_data	= &m520x_qspi_data,
+};
+
+static void __init m520x_qspi_init(void)
+{
+	u16 par;
+	/* setup Port QS for QSPI with gpio CS control */
+	writeb(0x3f, MCF_IPSBAR + MCF_GPIO_PAR_QSPI);
+	/* make U1CTS and U2RTS gpio for cs_control */
+	par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+	par &= 0x00ff;
+	writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
+
+
 static struct platform_device *m520x_devices[] __initdata = {
 	&m520x_uart,
 	&m520x_fec,
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m520x_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -147,6 +293,9 @@
 	mach_reset = m520x_cpu_reset;
 	m520x_uarts_init();
 	m520x_fec_init();
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m520x_qspi_init();
+#endif
 }
 
 /***************************************************************************/
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/platform/523x/config.c linux-libre-2.6.35-gnu/arch/m68knommu/platform/523x/config.c
--- linux-libre-2.6.34-gnu/arch/m68knommu/platform/523x/config.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/platform/523x/config.c	2010-08-01 18:11:14.000000000 -0400
@@ -16,10 +16,13 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -75,9 +78,173 @@
 	.resource		= m523x_fec_resources,
 };
 
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m523x_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINT_VECBASE + MCFINT_QSPI,
+		.end		= MCFINT_VECBASE + MCFINT_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#define MCFQSPI_CS0    91
+#define MCFQSPI_CS1    92
+#define MCFQSPI_CS2    103
+#define MCFQSPI_CS3    99
+
+static int m523x_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		goto fail4;
+	}
+
+	return 0;
+
+fail4:
+	gpio_free(MCFQSPI_CS3);
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m523x_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS3);
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m523x_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, cs_high);
+		break;
+	}
+}
+
+static void m523x_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, !cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, !cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, !cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, !cs_high);
+		break;
+	}
+}
+
+static struct mcfqspi_cs_control m523x_cs_control = {
+	.setup                  = m523x_cs_setup,
+	.teardown               = m523x_cs_teardown,
+	.select                 = m523x_cs_select,
+	.deselect               = m523x_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m523x_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &m523x_cs_control,
+};
+
+static struct platform_device m523x_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m523x_qspi_resources),
+	.resource		= m523x_qspi_resources,
+	.dev.platform_data	= &m523x_qspi_data,
+};
+
+static void __init m523x_qspi_init(void)
+{
+	u16 par;
+
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writeb(0x1f, MCFGPIO_PAR_QSPI);
+	/* and CS2 & CS3 as gpio */
+	par = readw(MCFGPIO_PAR_TIMER);
+	par &= 0x3f3f;
+	writew(par, MCFGPIO_PAR_TIMER);
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
+
 static struct platform_device *m523x_devices[] __initdata = {
 	&m523x_uart,
 	&m523x_fec,
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m523x_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -114,6 +281,9 @@
 static int __init init_BSP(void)
 {
 	m523x_fec_init();
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m523x_qspi_init();
+#endif
 	platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices));
 	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/platform/5249/config.c linux-libre-2.6.35-gnu/arch/m68knommu/platform/5249/config.c
--- linux-libre-2.6.34-gnu/arch/m68knommu/platform/5249/config.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/platform/5249/config.c	2010-08-01 18:11:14.000000000 -0400
@@ -12,10 +12,13 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -37,8 +40,196 @@
 	.dev.platform_data	= m5249_uart_platform,
 };
 
+#ifdef CONFIG_M5249C3
+
+static struct resource m5249_smc91x_resources[] = {
+	{
+		.start		= 0xe0000300,
+		.end		= 0xe0000300 + 0x100,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINTC2_GPIOIRQ6,
+		.end		= MCFINTC2_GPIOIRQ6,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m5249_smc91x = {
+	.name			= "smc91x",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m5249_smc91x_resources),
+	.resource		= m5249_smc91x_resources,
+};
+
+#endif /* CONFIG_M5249C3 */
+
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m5249_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCF_IRQ_QSPI,
+		.end		= MCF_IRQ_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#define MCFQSPI_CS0    29
+#define MCFQSPI_CS1    24
+#define MCFQSPI_CS2    21
+#define MCFQSPI_CS3    22
+
+static int m5249_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		goto fail4;
+	}
+
+	return 0;
+
+fail4:
+	gpio_free(MCFQSPI_CS3);
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m5249_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS3);
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m5249_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, cs_high);
+		break;
+	}
+}
+
+static void m5249_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, !cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, !cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, !cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, !cs_high);
+		break;
+	}
+}
+
+static struct mcfqspi_cs_control m5249_cs_control = {
+	.setup                  = m5249_cs_setup,
+	.teardown               = m5249_cs_teardown,
+	.select                 = m5249_cs_select,
+	.deselect               = m5249_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m5249_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &m5249_cs_control,
+};
+
+static struct platform_device m5249_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m5249_qspi_resources),
+	.resource		= m5249_qspi_resources,
+	.dev.platform_data	= &m5249_qspi_data,
+};
+
+static void __init m5249_qspi_init(void)
+{
+	/* QSPI irq setup */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
+	       MCF_MBAR + MCFSIM_QSPIICR);
+	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
+
+
 static struct platform_device *m5249_devices[] __initdata = {
 	&m5249_uart,
+#ifdef CONFIG_M5249C3
+	&m5249_smc91x,
+#endif
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m5249_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -67,6 +258,24 @@
 
 /***************************************************************************/
 
+#ifdef CONFIG_M5249C3
+
+static void __init m5249_smc91x_init(void)
+{
+	u32  gpio;
+
+	/* Set the GPIO line as interrupt source for smc91x device */
+	gpio = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+	writel(gpio | 0x40, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+
+	gpio = readl(MCF_MBAR2 + MCFSIM2_INTLEVEL5);
+	writel(gpio | 0x04000000, MCF_MBAR2 + MCFSIM2_INTLEVEL5);
+}
+
+#endif /* CONFIG_M5249C3 */
+
+/***************************************************************************/
+
 static void __init m5249_timers_init(void)
 {
 	/* Timer1 is always used as system timer */
@@ -100,6 +309,12 @@
 	mach_reset = m5249_cpu_reset;
 	m5249_timers_init();
 	m5249_uarts_init();
+#ifdef CONFIG_M5249C3
+	m5249_smc91x_init();
+#endif
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m5249_qspi_init();
+#endif
 }
 
 /***************************************************************************/
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/platform/527x/config.c linux-libre-2.6.35-gnu/arch/m68knommu/platform/527x/config.c
--- linux-libre-2.6.34-gnu/arch/m68knommu/platform/527x/config.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/platform/527x/config.c	2010-08-01 18:11:14.000000000 -0400
@@ -16,10 +16,13 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -106,12 +109,188 @@
 	},
 };
 
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m527x_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINT_VECBASE + MCFINT_QSPI,
+		.end		= MCFINT_VECBASE + MCFINT_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#if defined(CONFIG_M5271)
+#define MCFQSPI_CS0    91
+#define MCFQSPI_CS1    92
+#define MCFQSPI_CS2    99
+#define MCFQSPI_CS3    103
+#elif defined(CONFIG_M5275)
+#define MCFQSPI_CS0    59
+#define MCFQSPI_CS1    60
+#define MCFQSPI_CS2    61
+#define MCFQSPI_CS3    62
+#endif
+
+static int m527x_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		goto fail4;
+	}
+
+	return 0;
+
+fail4:
+	gpio_free(MCFQSPI_CS3);
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m527x_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS3);
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m527x_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, cs_high);
+		break;
+	}
+}
+
+static void m527x_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	switch (chip_select) {
+	case 0:
+		gpio_set_value(MCFQSPI_CS0, !cs_high);
+		break;
+	case 1:
+		gpio_set_value(MCFQSPI_CS1, !cs_high);
+		break;
+	case 2:
+		gpio_set_value(MCFQSPI_CS2, !cs_high);
+		break;
+	case 3:
+		gpio_set_value(MCFQSPI_CS3, !cs_high);
+		break;
+	}
+}
+
+static struct mcfqspi_cs_control m527x_cs_control = {
+	.setup                  = m527x_cs_setup,
+	.teardown               = m527x_cs_teardown,
+	.select                 = m527x_cs_select,
+	.deselect               = m527x_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m527x_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &m527x_cs_control,
+};
+
+static struct platform_device m527x_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m527x_qspi_resources),
+	.resource		= m527x_qspi_resources,
+	.dev.platform_data	= &m527x_qspi_data,
+};
+
+static void __init m527x_qspi_init(void)
+{
+#if defined(CONFIG_M5271)
+	u16 par;
+
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writeb(0x1f, MCFGPIO_PAR_QSPI);
+	/* and CS2 & CS3 as gpio */
+	par = readw(MCFGPIO_PAR_TIMER);
+	par &= 0x3f3f;
+	writew(par, MCFGPIO_PAR_TIMER);
+#elif defined(CONFIG_M5275)
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writew(0x003e, MCFGPIO_PAR_QSPI);
+#endif
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
+
 static struct platform_device *m527x_devices[] __initdata = {
 	&m527x_uart,
 	&m527x_fec[0],
 #ifdef CONFIG_FEC2
 	&m527x_fec[1],
 #endif
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m527x_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -187,6 +366,9 @@
 	mach_reset = m527x_cpu_reset;
 	m527x_uarts_init();
 	m527x_fec_init();
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m527x_qspi_init();
+#endif
 }
 
 /***************************************************************************/
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/platform/528x/config.c linux-libre-2.6.35-gnu/arch/m68knommu/platform/528x/config.c
--- linux-libre-2.6.34-gnu/arch/m68knommu/platform/528x/config.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/platform/528x/config.c	2010-08-01 18:11:14.000000000 -0400
@@ -17,10 +17,13 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -76,10 +79,141 @@
 	.resource		= m528x_fec_resources,
 };
 
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m528x_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINT_VECBASE + MCFINT_QSPI,
+		.end		= MCFINT_VECBASE + MCFINT_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#define MCFQSPI_CS0    147
+#define MCFQSPI_CS1    148
+#define MCFQSPI_CS2    149
+#define MCFQSPI_CS3    150
+
+static int m528x_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	status = gpio_request(MCFQSPI_CS3, "MCFQSPI_CS3");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS3 failed\n");
+		goto fail3;
+	}
+	status = gpio_direction_output(MCFQSPI_CS3, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS3 failed\n");
+		goto fail4;
+	}
+
+	return 0;
+
+fail4:
+	gpio_free(MCFQSPI_CS3);
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m528x_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS3);
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m528x_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
+}
+
+static void m528x_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
+}
+
+static struct mcfqspi_cs_control m528x_cs_control = {
+	.setup                  = m528x_cs_setup,
+	.teardown               = m528x_cs_teardown,
+	.select                 = m528x_cs_select,
+	.deselect               = m528x_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m528x_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 4,
+	.cs_control		= &m528x_cs_control,
+};
+
+static struct platform_device m528x_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m528x_qspi_resources),
+	.resource		= m528x_qspi_resources,
+	.dev.platform_data	= &m528x_qspi_data,
+};
+
+static void __init m528x_qspi_init(void)
+{
+	/* setup Port QS for QSPI with gpio CS control */
+	__raw_writeb(0x07, MCFGPIO_PQSPAR);
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
 
 static struct platform_device *m528x_devices[] __initdata = {
 	&m528x_uart,
 	&m528x_fec,
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m528x_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -174,6 +308,9 @@
 	mach_reset = m528x_cpu_reset;
 	m528x_uarts_init();
 	m528x_fec_init();
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m528x_qspi_init();
+#endif
 	platform_add_devices(m528x_devices, ARRAY_SIZE(m528x_devices));
 	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/platform/5307/Makefile linux-libre-2.6.35-gnu/arch/m68knommu/platform/5307/Makefile
--- linux-libre-2.6.34-gnu/arch/m68knommu/platform/5307/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/platform/5307/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -14,5 +14,7 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-y	+= config.o gpio.o
+obj-y			+= config.o gpio.o
+obj-$(CONFIG_NETtel)	+= nettel.o
+obj-$(CONFIG_CLEOPATRA)	+= nettel.o
 
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/platform/5307/nettel.c linux-libre-2.6.35-gnu/arch/m68knommu/platform/5307/nettel.c
--- linux-libre-2.6.34-gnu/arch/m68knommu/platform/5307/nettel.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/m68knommu/platform/5307/nettel.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,153 @@
+/***************************************************************************/
+
+/*
+ *	nettel.c -- startup code support for the NETtel boards
+ *
+ *	Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/nettel.h>
+
+/***************************************************************************/
+
+/*
+ * Define the IO and interrupt resources of the 2 SMC9196 interfaces.
+ */
+#define	NETTEL_SMC0_ADDR	0x30600300
+#define	NETTEL_SMC0_IRQ		29
+
+#define	NETTEL_SMC1_ADDR	0x30600000
+#define	NETTEL_SMC1_IRQ		27
+
+/*
+ * We need some access into the SMC9196 registers. Define those registers
+ * we will need here (including the smc91x.h doesn't seem to give us these
+ * in a simple form).
+ */
+#define	SMC91xx_BANKSELECT	14
+#define	SMC91xx_BASEADDR	2
+#define	SMC91xx_BASEMAC		4
+
+/***************************************************************************/
+
+static struct resource nettel_smc91x_0_resources[] = {
+	{
+		.start		= NETTEL_SMC0_ADDR,
+		.end		= NETTEL_SMC0_ADDR + 0x20,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= NETTEL_SMC0_IRQ,
+		.end		= NETTEL_SMC0_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource nettel_smc91x_1_resources[] = {
+	{
+		.start		= NETTEL_SMC1_ADDR,
+		.end		= NETTEL_SMC1_ADDR + 0x20,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= NETTEL_SMC1_IRQ,
+		.end		= NETTEL_SMC1_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device nettel_smc91x[] = {
+	{
+		.name			= "smc91x",
+		.id			= 0,
+		.num_resources		= ARRAY_SIZE(nettel_smc91x_0_resources),
+		.resource		= nettel_smc91x_0_resources,
+	},
+	{
+		.name			= "smc91x",
+		.id			= 1,
+		.num_resources		= ARRAY_SIZE(nettel_smc91x_1_resources),
+		.resource		= nettel_smc91x_1_resources,
+	},
+};
+
+static struct platform_device *nettel_devices[] __initdata = {
+	&nettel_smc91x[0],
+	&nettel_smc91x[1],
+};
+
+/***************************************************************************/
+
+static u8 nettel_macdefault[] __initdata = {
+	0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
+};
+
+/*
+ * Set flash contained MAC address into SMC9196 core. Make sure the flash
+ * MAC address is sane, and not an empty flash. If no good use the Moreton
+ * Bay default MAC address instead.
+ */
+
+static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
+{
+	u16 *macp;
+
+	macp = (u16 *) flashaddr;
+	if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
+		macp = (u16 *) &nettel_macdefault[0];
+
+	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+	writew(macp[0], ioaddr + SMC91xx_BASEMAC);
+	writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
+	writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
+}
+
+/***************************************************************************/
+
+/*
+ * Re-map the address space of at least one of the SMC ethernet
+ * parts. Both parts power up decoding the same address, so we
+ * need to move one of them first, before doing anything else.
+ */
+
+static void __init nettel_smc91x_init(void)
+{
+	writew(0x00ec, MCF_MBAR + MCFSIM_PADDR);
+	mcf_setppdata(0, 0x0080);
+	writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+	writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
+	mcf_setppdata(0x0080, 0);
+
+	/* Set correct chip select timing for SMC9196 accesses */
+	writew(0x1180, MCF_MBAR + MCFSIM_CSCR3);
+
+	/* Set the SMC interrupts to be auto-vectored */
+	mcf_autovector(NETTEL_SMC0_IRQ);
+	mcf_autovector(NETTEL_SMC1_IRQ);
+
+	/* Set MAC addresses from flash for both interfaces */
+	nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
+	nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
+}
+
+/***************************************************************************/
+
+static int __init init_nettel(void)
+{
+	nettel_smc91x_init();
+	platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
+	return 0;
+}
+
+arch_initcall(init_nettel);
+
+/***************************************************************************/
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/platform/532x/config.c linux-libre-2.6.35-gnu/arch/m68knommu/platform/532x/config.c
--- linux-libre-2.6.34-gnu/arch/m68knommu/platform/532x/config.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/platform/532x/config.c	2010-08-01 18:11:14.000000000 -0400
@@ -21,12 +21,15 @@
 #include <linux/param.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
 #include <asm/machdep.h>
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
 #include <asm/mcfdma.h>
 #include <asm/mcfwdebug.h>
+#include <asm/mcfqspi.h>
 
 /***************************************************************************/
 
@@ -82,9 +85,127 @@
 	.resource		= m532x_fec_resources,
 };
 
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+static struct resource m532x_qspi_resources[] = {
+	{
+		.start		= MCFQSPI_IOBASE,
+		.end		= MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= MCFINT_VECBASE + MCFINT_QSPI,
+		.end		= MCFINT_VECBASE + MCFINT_QSPI,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+#define MCFQSPI_CS0    84
+#define MCFQSPI_CS1    85
+#define MCFQSPI_CS2    86
+
+static int m532x_cs_setup(struct mcfqspi_cs_control *cs_control)
+{
+	int status;
+
+	status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS0 failed\n");
+		goto fail0;
+	}
+	status = gpio_direction_output(MCFQSPI_CS0, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n");
+		goto fail1;
+	}
+
+	status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS1 failed\n");
+		goto fail1;
+	}
+	status = gpio_direction_output(MCFQSPI_CS1, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n");
+		goto fail2;
+	}
+
+	status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2");
+	if (status) {
+		pr_debug("gpio_request for MCFQSPI_CS2 failed\n");
+		goto fail2;
+	}
+	status = gpio_direction_output(MCFQSPI_CS2, 1);
+	if (status) {
+		pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n");
+		goto fail3;
+	}
+
+	return 0;
+
+fail3:
+	gpio_free(MCFQSPI_CS2);
+fail2:
+	gpio_free(MCFQSPI_CS1);
+fail1:
+	gpio_free(MCFQSPI_CS0);
+fail0:
+	return status;
+}
+
+static void m532x_cs_teardown(struct mcfqspi_cs_control *cs_control)
+{
+	gpio_free(MCFQSPI_CS2);
+	gpio_free(MCFQSPI_CS1);
+	gpio_free(MCFQSPI_CS0);
+}
+
+static void m532x_cs_select(struct mcfqspi_cs_control *cs_control,
+			    u8 chip_select, bool cs_high)
+{
+	gpio_set_value(MCFQSPI_CS0 + chip_select, cs_high);
+}
+
+static void m532x_cs_deselect(struct mcfqspi_cs_control *cs_control,
+			      u8 chip_select, bool cs_high)
+{
+	gpio_set_value(MCFQSPI_CS0 + chip_select, !cs_high);
+}
+
+static struct mcfqspi_cs_control m532x_cs_control = {
+	.setup                  = m532x_cs_setup,
+	.teardown               = m532x_cs_teardown,
+	.select                 = m532x_cs_select,
+	.deselect               = m532x_cs_deselect,
+};
+
+static struct mcfqspi_platform_data m532x_qspi_data = {
+	.bus_num		= 0,
+	.num_chipselect		= 3,
+	.cs_control		= &m532x_cs_control,
+};
+
+static struct platform_device m532x_qspi = {
+	.name			= "mcfqspi",
+	.id			= 0,
+	.num_resources		= ARRAY_SIZE(m532x_qspi_resources),
+	.resource		= m532x_qspi_resources,
+	.dev.platform_data	= &m532x_qspi_data,
+};
+
+static void __init m532x_qspi_init(void)
+{
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writew(0x01f0, MCF_GPIO_PAR_QSPI);
+}
+#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */
+
+
 static struct platform_device *m532x_devices[] __initdata = {
 	&m532x_uart,
 	&m532x_fec,
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	&m532x_qspi,
+#endif
 };
 
 /***************************************************************************/
@@ -158,6 +279,9 @@
 {
 	m532x_uarts_init();
 	m532x_fec_init();
+#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE)
+	m532x_qspi_init();
+#endif
 	platform_add_devices(m532x_devices, ARRAY_SIZE(m532x_devices));
 	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/platform/68360/commproc.c linux-libre-2.6.35-gnu/arch/m68knommu/platform/68360/commproc.c
--- linux-libre-2.6.34-gnu/arch/m68knommu/platform/68360/commproc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/platform/68360/commproc.c	2010-08-01 18:11:14.000000000 -0400
@@ -110,7 +110,7 @@
 	/* 	pte = find_pte(&init_mm, host_page_addr); */
 	/* 	pte_val(*pte) |= _PAGE_NO_CACHE; */
 	/* 	flush_tlb_page(current->mm->mmap, host_buffer); */
-	
+
 	/* Tell everyone where the comm processor resides.
 	*/
 /* 	cpmp = (cpm360_t *)commproc; */
@@ -191,7 +191,7 @@
 	 */
 	((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr |= (1 << vec);
 #endif
-	
+
 }
 
 /* The CPM can generate the error interrupt when there is a race condition
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/platform/68360/head-ram.S linux-libre-2.6.35-gnu/arch/m68knommu/platform/68360/head-ram.S
--- linux-libre-2.6.34-gnu/arch/m68knommu/platform/68360/head-ram.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/platform/68360/head-ram.S	2010-08-01 18:11:14.000000000 -0400
@@ -280,7 +280,7 @@
      * and then overwritten as needed.
      */
  
-.section ".data.initvect","awx"
+.section ".data..initvect","awx"
     .long   RAMEND	/* Reset: Initial Stack Pointer                 - 0.  */
     .long   _start      /* Reset: Initial Program Counter               - 1.  */
     .long   buserr      /* Bus Error                                    - 2.  */
diff -druN linux-libre-2.6.34-gnu/arch/m68knommu/platform/68360/head-rom.S linux-libre-2.6.35-gnu/arch/m68knommu/platform/68360/head-rom.S
--- linux-libre-2.6.34-gnu/arch/m68knommu/platform/68360/head-rom.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/m68knommu/platform/68360/head-rom.S	2010-08-01 18:11:14.000000000 -0400
@@ -291,7 +291,7 @@
      * and then overwritten as needed.
      */
  
-.section ".data.initvect","awx"
+.section ".data..initvect","awx"
     .long   RAMEND	/* Reset: Initial Stack Pointer                 - 0.  */
     .long   _start      /* Reset: Initial Program Counter               - 1.  */
     .long   buserr      /* Bus Error                                    - 2.  */
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/include/asm/device.h linux-libre-2.6.35-gnu/arch/microblaze/include/asm/device.h
--- linux-libre-2.6.34-gnu/arch/microblaze/include/asm/device.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/include/asm/device.h	2010-08-01 18:11:14.000000000 -0400
@@ -12,29 +12,15 @@
 struct device_node;
 
 struct dev_archdata {
-	/* Optional pointer to an OF device node */
-	struct device_node	*of_node;
-
 	/* DMA operations on that device */
 	struct dma_map_ops	*dma_ops;
 	void                    *dma_data;
 };
 
 struct pdev_archdata {
+	u64 dma_mask;
 };
 
-static inline void dev_archdata_set_node(struct dev_archdata *ad,
-					 struct device_node *np)
-{
-	ad->of_node = np;
-}
-
-static inline struct device_node *
-dev_archdata_get_node(const struct dev_archdata *ad)
-{
-	return ad->of_node;
-}
-
 #endif /* _ASM_MICROBLAZE_DEVICE_H */
 
 
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/include/asm/lmb.h linux-libre-2.6.35-gnu/arch/microblaze/include/asm/lmb.h
--- linux-libre-2.6.34-gnu/arch/microblaze/include/asm/lmb.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/include/asm/lmb.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_LMB_H
-#define _ASM_MICROBLAZE_LMB_H
-
-/* LMB limit is OFF */
-#define LMB_REAL_LIMIT	0xFFFFFFFF
-
-#endif /* _ASM_MICROBLAZE_LMB_H */
-
-
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/include/asm/memblock.h linux-libre-2.6.35-gnu/arch/microblaze/include/asm/memblock.h
--- linux-libre-2.6.34-gnu/arch/microblaze/include/asm/memblock.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/microblaze/include/asm/memblock.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MEMBLOCK_H
+#define _ASM_MICROBLAZE_MEMBLOCK_H
+
+/* MEMBLOCK limit is OFF */
+#define MEMBLOCK_REAL_LIMIT	0xFFFFFFFF
+
+#endif /* _ASM_MICROBLAZE_MEMBLOCK_H */
+
+
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/include/asm/of_device.h linux-libre-2.6.35-gnu/arch/microblaze/include/asm/of_device.h
--- linux-libre-2.6.34-gnu/arch/microblaze/include/asm/of_device.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/include/asm/of_device.h	2010-08-01 18:11:14.000000000 -0400
@@ -21,9 +21,8 @@
  * probed using OF properties.
  */
 struct of_device {
-	struct device_node	*node; /* to be obsoleted */
-	u64			dma_mask; /* DMA mask */
 	struct device		dev; /* Generic device interface */
+	struct pdev_archdata	archdata;
 };
 
 extern ssize_t of_device_get_modalias(struct of_device *ofdev,
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/include/asm/page.h linux-libre-2.6.35-gnu/arch/microblaze/include/asm/page.h
--- linux-libre-2.6.34-gnu/arch/microblaze/include/asm/page.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/include/asm/page.h	2010-08-01 18:11:14.000000000 -0400
@@ -34,6 +34,8 @@
 /* MS be sure that SLAB allocates aligned objects */
 #define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
 
+#define ARCH_SLAB_MINALIGN	L1_CACHE_BYTES
+
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
 #define PAGE_DOWN(addr)	((addr)&(~((PAGE_SIZE)-1)))
 
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/microblaze/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/microblaze/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -1 +1,3 @@
 #include <asm-generic/scatterlist.h>
+
+#define ISA_DMA_THRESHOLD	(~0UL)
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/include/asm/system.h linux-libre-2.6.35-gnu/arch/microblaze/include/asm/system.h
--- linux-libre-2.6.34-gnu/arch/microblaze/include/asm/system.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/include/asm/system.h	2010-08-01 18:11:14.000000000 -0400
@@ -12,6 +12,7 @@
 #include <asm/registers.h>
 #include <asm/setup.h>
 #include <asm/irqflags.h>
+#include <asm/cache.h>
 
 #include <asm-generic/cmpxchg.h>
 #include <asm-generic/cmpxchg-local.h>
@@ -96,4 +97,14 @@
 
 #define arch_align_stack(x) (x)
 
+/*
+ * MicroBlaze doesn't handle unaligned accesses in hardware.
+ *
+ * Based on this we force the IP header alignment in network drivers.
+ * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining
+ * cacheline alignment of buffers.
+ */
+#define NET_IP_ALIGN	2
+#define NET_SKB_PAD	L1_CACHE_BYTES
+
 #endif /* _ASM_MICROBLAZE_SYSTEM_H */
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/microblaze/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/microblaze/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -122,7 +122,7 @@
 /* restore singlestep on return to user mode */
 #define TIF_SINGLESTEP		4
 #define TIF_IRET		5 /* return with iret */
-#define TIF_MEMDIE		6
+#define TIF_MEMDIE		6	/* is terminating due to OOM killer */
 #define TIF_SYSCALL_AUDIT	9       /* syscall auditing active */
 #define TIF_SECCOMP		10      /* secure computing */
 #define TIF_FREEZE		14	/* Freezing for suspend */
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/Kconfig linux-libre-2.6.35-gnu/arch/microblaze/Kconfig
--- linux-libre-2.6.34-gnu/arch/microblaze/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -5,7 +5,7 @@
 
 config MICROBLAZE
 	def_bool y
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_FUNCTION_GRAPH_TRACER
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/kernel/dma.c linux-libre-2.6.35-gnu/arch/microblaze/kernel/dma.c
--- linux-libre-2.6.34-gnu/arch/microblaze/kernel/dma.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/kernel/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -90,7 +90,6 @@
 	/* FIXME this part of code is untested */
 	for_each_sg(sgl, sg, nents, i) {
 		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
-		sg->dma_length = sg->length;
 		__dma_sync_page(page_to_phys(sg_page(sg)), sg->offset,
 							sg->length, direction);
 	}
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/kernel/of_device.c linux-libre-2.6.35-gnu/arch/microblaze/kernel/of_device.c
--- linux-libre-2.6.34-gnu/arch/microblaze/kernel/of_device.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/kernel/of_device.c	2010-08-01 18:11:14.000000000 -0400
@@ -12,7 +12,7 @@
 void of_device_make_bus_id(struct of_device *dev)
 {
 	static atomic_t bus_no_reg_magic;
-	struct device_node *node = dev->node;
+	struct device_node *node = dev->dev.of_node;
 	const u32 *reg;
 	u64 addr;
 	int magic;
@@ -49,11 +49,10 @@
 	if (!dev)
 		return NULL;
 
-	dev->node = of_node_get(np);
-	dev->dev.dma_mask = &dev->dma_mask;
+	dev->dev.of_node = of_node_get(np);
+	dev->dev.dma_mask = &dev->archdata.dma_mask;
 	dev->dev.parent = parent;
 	dev->dev.release = of_release_dev;
-	dev->dev.archdata.of_node = np;
 
 	if (bus_id)
 		dev_set_name(&dev->dev, bus_id);
@@ -75,17 +74,17 @@
 
 	ofdev = to_of_device(dev);
 
-	if (add_uevent_var(env, "OF_NAME=%s", ofdev->node->name))
+	if (add_uevent_var(env, "OF_NAME=%s", ofdev->dev.of_node->name))
 		return -ENOMEM;
 
-	if (add_uevent_var(env, "OF_TYPE=%s", ofdev->node->type))
+	if (add_uevent_var(env, "OF_TYPE=%s", ofdev->dev.of_node->type))
 		return -ENOMEM;
 
 	/* Since the compatible field can contain pretty much anything
 	 * it's not really legal to split it out with commas. We split it
 	 * up using a number of environment variables instead. */
 
-	compat = of_get_property(ofdev->node, "compatible", &cplen);
+	compat = of_get_property(ofdev->dev.of_node, "compatible", &cplen);
 	while (compat && *compat && cplen > 0) {
 		if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat))
 			return -ENOMEM;
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/kernel/of_platform.c linux-libre-2.6.35-gnu/arch/microblaze/kernel/of_platform.c
--- linux-libre-2.6.34-gnu/arch/microblaze/kernel/of_platform.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/kernel/of_platform.c	2010-08-01 18:11:14.000000000 -0400
@@ -47,7 +47,7 @@
 	if (!dev)
 		return NULL;
 
-	dev->dma_mask = 0xffffffffUL;
+	dev->archdata.dma_mask = 0xffffffffUL;
 	dev->dev.bus = &of_platform_bus_type;
 
 	/* We do not fill the DMA ops for platform devices by default.
@@ -166,7 +166,7 @@
 
 static int of_dev_node_match(struct device *dev, void *data)
 {
-	return to_of_device(dev)->node == data;
+	return to_of_device(dev)->dev.of_node == data;
 }
 
 struct of_device *of_find_device_by_node(struct device_node *np)
@@ -184,7 +184,7 @@
 static int of_dev_phandle_match(struct device *dev, void *data)
 {
 	phandle *ph = data;
-	return to_of_device(dev)->node->phandle == *ph;
+	return to_of_device(dev)->dev.of_node->phandle == *ph;
 }
 
 struct of_device *of_find_device_by_phandle(phandle ph)
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/kernel/prom.c linux-libre-2.6.35-gnu/arch/microblaze/kernel/prom.c
--- linux-libre-2.6.34-gnu/arch/microblaze/kernel/prom.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/kernel/prom.c	2010-08-01 18:11:14.000000000 -0400
@@ -29,7 +29,7 @@
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/page.h>
@@ -49,12 +49,12 @@
 
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
-	lmb_add(base, size);
+	memblock_add(base, size);
 }
 
 u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 {
-	return lmb_alloc(size, align);
+	return memblock_alloc(size, align);
 }
 
 #ifdef CONFIG_EARLY_PRINTK
@@ -104,8 +104,8 @@
 	 */
 	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
 
-	/* Scan memory nodes and rebuild LMBs */
-	lmb_init();
+	/* Scan memory nodes and rebuild MEMBLOCKs */
+	memblock_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 
@@ -113,9 +113,9 @@
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
-	lmb_analyze();
+	memblock_analyze();
 
-	pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
+	pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());
 
 	pr_debug(" <- early_init_devtree()\n");
 }
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/mm/init.c linux-libre-2.6.35-gnu/arch/microblaze/mm/init.c
--- linux-libre-2.6.34-gnu/arch/microblaze/mm/init.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/mm/init.c	2010-08-01 18:11:14.000000000 -0400
@@ -10,7 +10,7 @@
 #include <linux/bootmem.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/mm.h> /* mem_init */
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
@@ -76,10 +76,10 @@
 	u32 kernel_align_start, kernel_align_size;
 
 	/* Find main memory where is the kernel */
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		memory_start = (u32) lmb.memory.region[i].base;
-		memory_end = (u32) lmb.memory.region[i].base
-				+ (u32) lmb.memory.region[i].size;
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		memory_start = (u32) memblock.memory.region[i].base;
+		memory_end = (u32) memblock.memory.region[i].base
+				+ (u32) memblock.memory.region[i].size;
 		if ((memory_start <= (u32)_text) &&
 					((u32)_text <= memory_end)) {
 			memory_size = memory_end - memory_start;
@@ -100,7 +100,7 @@
 	kernel_align_start = PAGE_DOWN((u32)_text);
 	/* ALIGN can be remove because _end in vmlinux.lds.S is align */
 	kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start;
-	lmb_reserve(kernel_align_start, kernel_align_size);
+	memblock_reserve(kernel_align_start, kernel_align_size);
 	printk(KERN_INFO "%s: kernel addr=0x%08x-0x%08x size=0x%08x\n",
 		__func__, kernel_align_start, kernel_align_start
 			+ kernel_align_size, kernel_align_size);
@@ -141,18 +141,18 @@
 	map_size = init_bootmem_node(&contig_page_data,
 		PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
 #endif
-	lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
+	memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
 
 	/* free bootmem is whole main memory */
 	free_bootmem(memory_start, memory_size);
 
 	/* reserve allocate blocks */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
+	for (i = 0; i < memblock.reserved.cnt; i++) {
 		pr_debug("reserved %d - 0x%08x-0x%08x\n", i,
-			(u32) lmb.reserved.region[i].base,
-			(u32) lmb_size_bytes(&lmb.reserved, i));
-		reserve_bootmem(lmb.reserved.region[i].base,
-			lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
+			(u32) memblock.reserved.region[i].base,
+			(u32) memblock_size_bytes(&memblock.reserved, i));
+		reserve_bootmem(memblock.reserved.region[i].base,
+			memblock_size_bytes(&memblock.reserved, i) - 1, BOOTMEM_DEFAULT);
 	}
 #ifdef CONFIG_MMU
 	init_bootmem_done = 1;
@@ -235,7 +235,7 @@
 		if (maxmem && memory_size > maxmem) {
 			memory_size = maxmem;
 			memory_end = memory_start + memory_size;
-			lmb.memory.region[0].size = memory_size;
+			memblock.memory.region[0].size = memory_size;
 		}
 	}
 }
@@ -273,19 +273,19 @@
 {
 	unsigned int kstart, ksize;
 
-	if (!lmb.reserved.cnt) {
+	if (!memblock.reserved.cnt) {
 		printk(KERN_EMERG "Error memory count\n");
 		machine_restart(NULL);
 	}
 
-	if ((u32) lmb.memory.region[0].size < 0x1000000) {
+	if ((u32) memblock.memory.region[0].size < 0x1000000) {
 		printk(KERN_EMERG "Memory must be greater than 16MB\n");
 		machine_restart(NULL);
 	}
 	/* Find main memory where the kernel is */
-	memory_start = (u32) lmb.memory.region[0].base;
-	memory_end = (u32) lmb.memory.region[0].base +
-				(u32) lmb.memory.region[0].size;
+	memory_start = (u32) memblock.memory.region[0].base;
+	memory_end = (u32) memblock.memory.region[0].base +
+				(u32) memblock.memory.region[0].size;
 	memory_size = memory_end - memory_start;
 
 	mm_cmdline_setup(); /* FIXME parse args from command line - not used */
@@ -297,7 +297,7 @@
 	kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
 	/* kernel size */
 	ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
-	lmb_reserve(kstart, ksize);
+	memblock_reserve(kstart, ksize);
 
 #if defined(CONFIG_BLK_DEV_INITRD)
 	/* Remove the init RAM disk from the available memory. */
@@ -335,7 +335,7 @@
 		 * Mem start + 32MB -> here is limit
 		 * because of mem mapping from head.S
 		 */
-		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
 					memory_start + 0x2000000));
 	}
 	return p;
diff -druN linux-libre-2.6.34-gnu/arch/microblaze/pci/pci-common.c linux-libre-2.6.35-gnu/arch/microblaze/pci/pci-common.c
--- linux-libre-2.6.34-gnu/arch/microblaze/pci/pci-common.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/microblaze/pci/pci-common.c	2010-08-01 18:11:14.000000000 -0400
@@ -1277,6 +1277,7 @@
 		printk(KERN_WARNING "PCI: Cannot allocate resource region "
 		       "%d of PCI bridge %d, will remap\n", i, bus->number);
 clear_resource:
+		res->start = res->end = 0;
 		res->flags = 0;
 	}
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/alchemy/common/dbdma.c linux-libre-2.6.35-gnu/arch/mips/alchemy/common/dbdma.c
--- linux-libre-2.6.34-gnu/arch/mips/alchemy/common/dbdma.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/alchemy/common/dbdma.c	2010-08-01 18:11:14.000000000 -0400
@@ -36,6 +36,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/sysdev.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 
@@ -174,10 +175,6 @@
 
 #define DBDEV_TAB_SIZE	ARRAY_SIZE(dbdev_tab)
 
-#ifdef CONFIG_PM
-static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][6];
-#endif
-
 
 static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
 
@@ -960,29 +957,37 @@
 	return nbytes;
 }
 
-#ifdef CONFIG_PM
-void au1xxx_dbdma_suspend(void)
+
+struct alchemy_dbdma_sysdev {
+	struct sys_device sysdev;
+	u32 pm_regs[NUM_DBDMA_CHANS + 1][6];
+};
+
+static int alchemy_dbdma_suspend(struct sys_device *dev,
+				 pm_message_t state)
 {
+	struct alchemy_dbdma_sysdev *sdev =
+		container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
 	int i;
 	u32 addr;
 
 	addr = DDMA_GLOBAL_BASE;
-	au1xxx_dbdma_pm_regs[0][0] = au_readl(addr + 0x00);
-	au1xxx_dbdma_pm_regs[0][1] = au_readl(addr + 0x04);
-	au1xxx_dbdma_pm_regs[0][2] = au_readl(addr + 0x08);
-	au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
+	sdev->pm_regs[0][0] = au_readl(addr + 0x00);
+	sdev->pm_regs[0][1] = au_readl(addr + 0x04);
+	sdev->pm_regs[0][2] = au_readl(addr + 0x08);
+	sdev->pm_regs[0][3] = au_readl(addr + 0x0c);
 
 	/* save channel configurations */
 	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
-		au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
-		au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
-		au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
-		au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
-		au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
-		au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
+		sdev->pm_regs[i][0] = au_readl(addr + 0x00);
+		sdev->pm_regs[i][1] = au_readl(addr + 0x04);
+		sdev->pm_regs[i][2] = au_readl(addr + 0x08);
+		sdev->pm_regs[i][3] = au_readl(addr + 0x0c);
+		sdev->pm_regs[i][4] = au_readl(addr + 0x10);
+		sdev->pm_regs[i][5] = au_readl(addr + 0x14);
 
 		/* halt channel */
-		au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
+		au_writel(sdev->pm_regs[i][0] & ~1, addr + 0x00);
 		au_sync();
 		while (!(au_readl(addr + 0x14) & 1))
 			au_sync();
@@ -992,32 +997,65 @@
 	/* disable channel interrupts */
 	au_writel(0, DDMA_GLOBAL_BASE + 0x0c);
 	au_sync();
+
+	return 0;
 }
 
-void au1xxx_dbdma_resume(void)
+static int alchemy_dbdma_resume(struct sys_device *dev)
 {
+	struct alchemy_dbdma_sysdev *sdev =
+		container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
 	int i;
 	u32 addr;
 
 	addr = DDMA_GLOBAL_BASE;
-	au_writel(au1xxx_dbdma_pm_regs[0][0], addr + 0x00);
-	au_writel(au1xxx_dbdma_pm_regs[0][1], addr + 0x04);
-	au_writel(au1xxx_dbdma_pm_regs[0][2], addr + 0x08);
-	au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
+	au_writel(sdev->pm_regs[0][0], addr + 0x00);
+	au_writel(sdev->pm_regs[0][1], addr + 0x04);
+	au_writel(sdev->pm_regs[0][2], addr + 0x08);
+	au_writel(sdev->pm_regs[0][3], addr + 0x0c);
 
 	/* restore channel configurations */
 	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
-		au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
-		au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
-		au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
-		au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
-		au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
-		au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
+		au_writel(sdev->pm_regs[i][0], addr + 0x00);
+		au_writel(sdev->pm_regs[i][1], addr + 0x04);
+		au_writel(sdev->pm_regs[i][2], addr + 0x08);
+		au_writel(sdev->pm_regs[i][3], addr + 0x0c);
+		au_writel(sdev->pm_regs[i][4], addr + 0x10);
+		au_writel(sdev->pm_regs[i][5], addr + 0x14);
 		au_sync();
 		addr += 0x100;	/* next channel base */
 	}
+
+	return 0;
+}
+
+static struct sysdev_class alchemy_dbdma_sysdev_class = {
+	.name		= "dbdma",
+	.suspend	= alchemy_dbdma_suspend,
+	.resume		= alchemy_dbdma_resume,
+};
+
+static int __init alchemy_dbdma_sysdev_init(void)
+{
+	struct alchemy_dbdma_sysdev *sdev;
+	int ret;
+
+	ret = sysdev_class_register(&alchemy_dbdma_sysdev_class);
+	if (ret)
+		return ret;
+
+	sdev = kzalloc(sizeof(struct alchemy_dbdma_sysdev), GFP_KERNEL);
+	if (!sdev)
+		return -ENOMEM;
+
+	sdev->sysdev.id = -1;
+	sdev->sysdev.cls = &alchemy_dbdma_sysdev_class;
+	ret = sysdev_register(&sdev->sysdev);
+	if (ret)
+		kfree(sdev);
+
+	return ret;
 }
-#endif	/* CONFIG_PM */
 
 static int __init au1xxx_dbdma_init(void)
 {
@@ -1046,6 +1084,11 @@
 	else {
 		dbdma_initialized = 1;
 		printk(KERN_INFO "Alchemy DBDMA initialized\n");
+		ret = alchemy_dbdma_sysdev_init();
+		if (ret) {
+			printk(KERN_ERR "DBDMA PM init failed\n");
+			ret = 0;
+		}
 	}
 
 	return ret;
diff -druN linux-libre-2.6.34-gnu/arch/mips/alchemy/common/irq.c linux-libre-2.6.35-gnu/arch/mips/alchemy/common/irq.c
--- linux-libre-2.6.34-gnu/arch/mips/alchemy/common/irq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/alchemy/common/irq.c	2010-08-01 18:11:14.000000000 -0400
@@ -29,6 +29,8 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/sysdev.h>
 
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
@@ -216,90 +218,6 @@
 };
 
 
-#ifdef CONFIG_PM
-
-/*
- * Save/restore the interrupt controller state.
- * Called from the save/restore core registers as part of the
- * au_sleep function in power.c.....maybe I should just pm_register()
- * them instead?
- */
-static unsigned int	sleep_intctl_config0[2];
-static unsigned int	sleep_intctl_config1[2];
-static unsigned int	sleep_intctl_config2[2];
-static unsigned int	sleep_intctl_src[2];
-static unsigned int	sleep_intctl_assign[2];
-static unsigned int	sleep_intctl_wake[2];
-static unsigned int	sleep_intctl_mask[2];
-
-void save_au1xxx_intctl(void)
-{
-	sleep_intctl_config0[0] = au_readl(IC0_CFG0RD);
-	sleep_intctl_config1[0] = au_readl(IC0_CFG1RD);
-	sleep_intctl_config2[0] = au_readl(IC0_CFG2RD);
-	sleep_intctl_src[0] = au_readl(IC0_SRCRD);
-	sleep_intctl_assign[0] = au_readl(IC0_ASSIGNRD);
-	sleep_intctl_wake[0] = au_readl(IC0_WAKERD);
-	sleep_intctl_mask[0] = au_readl(IC0_MASKRD);
-
-	sleep_intctl_config0[1] = au_readl(IC1_CFG0RD);
-	sleep_intctl_config1[1] = au_readl(IC1_CFG1RD);
-	sleep_intctl_config2[1] = au_readl(IC1_CFG2RD);
-	sleep_intctl_src[1] = au_readl(IC1_SRCRD);
-	sleep_intctl_assign[1] = au_readl(IC1_ASSIGNRD);
-	sleep_intctl_wake[1] = au_readl(IC1_WAKERD);
-	sleep_intctl_mask[1] = au_readl(IC1_MASKRD);
-}
-
-/*
- * For most restore operations, we clear the entire register and
- * then set the bits we found during the save.
- */
-void restore_au1xxx_intctl(void)
-{
-	au_writel(0xffffffff, IC0_MASKCLR); au_sync();
-
-	au_writel(0xffffffff, IC0_CFG0CLR); au_sync();
-	au_writel(sleep_intctl_config0[0], IC0_CFG0SET); au_sync();
-	au_writel(0xffffffff, IC0_CFG1CLR); au_sync();
-	au_writel(sleep_intctl_config1[0], IC0_CFG1SET); au_sync();
-	au_writel(0xffffffff, IC0_CFG2CLR); au_sync();
-	au_writel(sleep_intctl_config2[0], IC0_CFG2SET); au_sync();
-	au_writel(0xffffffff, IC0_SRCCLR); au_sync();
-	au_writel(sleep_intctl_src[0], IC0_SRCSET); au_sync();
-	au_writel(0xffffffff, IC0_ASSIGNCLR); au_sync();
-	au_writel(sleep_intctl_assign[0], IC0_ASSIGNSET); au_sync();
-	au_writel(0xffffffff, IC0_WAKECLR); au_sync();
-	au_writel(sleep_intctl_wake[0], IC0_WAKESET); au_sync();
-	au_writel(0xffffffff, IC0_RISINGCLR); au_sync();
-	au_writel(0xffffffff, IC0_FALLINGCLR); au_sync();
-	au_writel(0x00000000, IC0_TESTBIT); au_sync();
-
-	au_writel(0xffffffff, IC1_MASKCLR); au_sync();
-
-	au_writel(0xffffffff, IC1_CFG0CLR); au_sync();
-	au_writel(sleep_intctl_config0[1], IC1_CFG0SET); au_sync();
-	au_writel(0xffffffff, IC1_CFG1CLR); au_sync();
-	au_writel(sleep_intctl_config1[1], IC1_CFG1SET); au_sync();
-	au_writel(0xffffffff, IC1_CFG2CLR); au_sync();
-	au_writel(sleep_intctl_config2[1], IC1_CFG2SET); au_sync();
-	au_writel(0xffffffff, IC1_SRCCLR); au_sync();
-	au_writel(sleep_intctl_src[1], IC1_SRCSET); au_sync();
-	au_writel(0xffffffff, IC1_ASSIGNCLR); au_sync();
-	au_writel(sleep_intctl_assign[1], IC1_ASSIGNSET); au_sync();
-	au_writel(0xffffffff, IC1_WAKECLR); au_sync();
-	au_writel(sleep_intctl_wake[1], IC1_WAKESET); au_sync();
-	au_writel(0xffffffff, IC1_RISINGCLR); au_sync();
-	au_writel(0xffffffff, IC1_FALLINGCLR); au_sync();
-	au_writel(0x00000000, IC1_TESTBIT); au_sync();
-
-	au_writel(sleep_intctl_mask[1], IC1_MASKSET); au_sync();
-
-	au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync();
-}
-#endif /* CONFIG_PM */
-
-
 static void au1x_ic0_unmask(unsigned int irq_nr)
 {
 	unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
@@ -635,3 +553,91 @@
 		break;
 	}
 }
+
+struct alchemy_ic_sysdev {
+	struct sys_device sysdev;
+	void __iomem *base;
+	unsigned long pmdata[7];
+};
+
+static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct alchemy_ic_sysdev *icdev =
+			container_of(dev, struct alchemy_ic_sysdev, sysdev);
+
+	icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD);
+	icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD);
+	icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD);
+	icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD);
+	icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD);
+	icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD);
+	icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD);
+
+	return 0;
+}
+
+static int alchemy_ic_resume(struct sys_device *dev)
+{
+	struct alchemy_ic_sysdev *icdev =
+			container_of(dev, struct alchemy_ic_sysdev, sysdev);
+
+	__raw_writel(0xffffffff, icdev->base + IC_MASKCLR);
+	__raw_writel(0xffffffff, icdev->base + IC_CFG0CLR);
+	__raw_writel(0xffffffff, icdev->base + IC_CFG1CLR);
+	__raw_writel(0xffffffff, icdev->base + IC_CFG2CLR);
+	__raw_writel(0xffffffff, icdev->base + IC_SRCCLR);
+	__raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR);
+	__raw_writel(0xffffffff, icdev->base + IC_WAKECLR);
+	__raw_writel(0xffffffff, icdev->base + IC_RISINGCLR);
+	__raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR);
+	__raw_writel(0x00000000, icdev->base + IC_TESTBIT);
+	wmb();
+	__raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET);
+	__raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET);
+	__raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET);
+	__raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET);
+	__raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET);
+	__raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET);
+	wmb();
+
+	__raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET);
+	wmb();
+
+	return 0;
+}
+
+static struct sysdev_class alchemy_ic_sysdev_class = {
+	.name		= "ic",
+	.suspend	= alchemy_ic_suspend,
+	.resume		= alchemy_ic_resume,
+};
+
+static int __init alchemy_ic_sysdev_init(void)
+{
+	struct alchemy_ic_sysdev *icdev;
+	unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR };
+	int err, i;
+
+	err = sysdev_class_register(&alchemy_ic_sysdev_class);
+	if (err)
+		return err;
+
+	for (i = 0; i < 2; i++) {
+		icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL);
+		if (!icdev)
+			return -ENOMEM;
+
+		icdev->base = ioremap(icbase[i], 0x1000);
+
+		icdev->sysdev.id = i;
+		icdev->sysdev.cls = &alchemy_ic_sysdev_class;
+		err = sysdev_register(&icdev->sysdev);
+		if (err) {
+			kfree(icdev);
+			return err;
+		}
+	}
+
+	return 0;
+}
+device_initcall(alchemy_ic_sysdev_init);
diff -druN linux-libre-2.6.34-gnu/arch/mips/alchemy/common/platform.c linux-libre-2.6.35-gnu/arch/mips/alchemy/common/platform.c
--- linux-libre-2.6.34-gnu/arch/mips/alchemy/common/platform.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/alchemy/common/platform.c	2010-08-01 18:11:14.000000000 -0400
@@ -435,20 +435,21 @@
 static int __init au1xxx_platform_init(void)
 {
 	unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
-	int i;
+	int err, i;
 
 	/* Fill up uartclk. */
 	for (i = 0; au1x00_uart_data[i].flags; i++)
 		au1x00_uart_data[i].uartclk = uartclk;
 
+	err = platform_add_devices(au1xxx_platform_devices,
+				   ARRAY_SIZE(au1xxx_platform_devices));
 #ifndef CONFIG_SOC_AU1100
 	/* Register second MAC if enabled in pinfunc */
-	if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
+	if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
 		platform_device_register(&au1xxx_eth1_device);
 #endif
 
-	return platform_add_devices(au1xxx_platform_devices,
-				    ARRAY_SIZE(au1xxx_platform_devices));
+	return err;
 }
 
 arch_initcall(au1xxx_platform_init);
diff -druN linux-libre-2.6.34-gnu/arch/mips/alchemy/common/power.c linux-libre-2.6.35-gnu/arch/mips/alchemy/common/power.c
--- linux-libre-2.6.34-gnu/arch/mips/alchemy/common/power.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/alchemy/common/power.c	2010-08-01 18:11:14.000000000 -0400
@@ -36,9 +36,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/mach-au1x00/au1000.h>
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#include <asm/mach-au1x00/au1xxx_dbdma.h>
-#endif
 
 #ifdef CONFIG_PM
 
@@ -106,9 +103,6 @@
 	sleep_usb[1] = au_readl(0xb4020024);	/* OTG_MUX */
 #endif
 
-	/* Save interrupt controller state. */
-	save_au1xxx_intctl();
-
 	/* Clocks and PLLs. */
 	sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
 	sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
@@ -132,10 +126,6 @@
 	sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3);
 	sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3);
 	sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
-
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-	au1xxx_dbdma_suspend();
-#endif
 }
 
 static void restore_core_regs(void)
@@ -199,19 +189,19 @@
 		au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync();
 		au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync();
 	}
-
-	restore_au1xxx_intctl();
-
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-	au1xxx_dbdma_resume();
-#endif
 }
 
 void au_sleep(void)
 {
-	save_core_regs();
-	au1xxx_save_and_sleep();
-	restore_core_regs();
+	int cpuid = alchemy_get_cputype();
+	if (cpuid != ALCHEMY_CPU_UNKNOWN) {
+		save_core_regs();
+		if (cpuid <= ALCHEMY_CPU_AU1500)
+			alchemy_sleep_au1000();
+		else if (cpuid <= ALCHEMY_CPU_AU1200)
+			alchemy_sleep_au1550();
+		restore_core_regs();
+	}
 }
 
 #endif	/* CONFIG_PM */
diff -druN linux-libre-2.6.34-gnu/arch/mips/alchemy/common/sleeper.S linux-libre-2.6.35-gnu/arch/mips/alchemy/common/sleeper.S
--- linux-libre-2.6.34-gnu/arch/mips/alchemy/common/sleeper.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/alchemy/common/sleeper.S	2010-08-01 18:11:14.000000000 -0400
@@ -22,10 +22,9 @@
 	.set noat
 	.align	5
 
-/* Save all of the processor general registers and go to sleep.
- * A wakeup condition will get us back here to restore the registers.
- */
-LEAF(au1xxx_save_and_sleep)
+
+/* preparatory stuff */
+.macro	SETUP_SLEEP
 	subu	sp, PT_SIZE
 	sw	$1, PT_R1(sp)
 	sw	$2, PT_R2(sp)
@@ -69,12 +68,32 @@
 	 */
 	lui	t3, 0xb190		/* sys_xxx */
 	sw	sp, 0x0018(t3)
-	la	k0, 3f			/* resume path */
+	la	k0, alchemy_sleep_wakeup	/* resume path */
 	sw	k0, 0x001c(t3)
+.endm
 
-	/* Put SDRAM into self refresh:  Preload instructions into cache,
-	 * issue a precharge, auto/self refresh, then sleep commands to it.
-	 */
+.macro	DO_SLEEP
+	/* put power supply and processor to sleep */
+	sw	zero, 0x0078(t3)	/* sys_slppwr */
+	sync
+	sw	zero, 0x007c(t3)	/* sys_sleep */
+	sync
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+.endm
+
+/* sleep code for Au1000/Au1100/Au1500 memory controller type */
+LEAF(alchemy_sleep_au1000)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
 	la	t0, 1f
 	.set	mips3
 	cache	0x14, 0(t0)
@@ -84,17 +103,32 @@
 	.set	mips0
 
 1:	lui 	a0, 0xb400		/* mem_xxx */
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) ||	\
-    defined(CONFIG_SOC_AU1500)
 	sw	zero, 0x001c(a0) 	/* Precharge */
 	sync
 	sw	zero, 0x0020(a0)	/* Auto Refresh */
 	sync
 	sw	zero, 0x0030(a0)  	/* Sleep */
 	sync
-#endif
 
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+	DO_SLEEP
+
+END(alchemy_sleep_au1000)
+
+/* sleep code for Au1550/Au1200 memory controller type */
+LEAF(alchemy_sleep_au1550)
+
+	SETUP_SLEEP
+
+	/* cache following instructions, as memory gets put to sleep */
+	la	t0, 1f
+	.set	mips3
+	cache	0x14, 0(t0)
+	cache	0x14, 32(t0)
+	cache	0x14, 64(t0)
+	cache	0x14, 96(t0)
+	.set	mips0
+
+1:	lui 	a0, 0xb400		/* mem_xxx */
 	sw	zero, 0x08c0(a0) 	/* Precharge */
 	sync
 	sw	zero, 0x08d0(a0)	/* Self Refresh */
@@ -114,26 +148,17 @@
 	and 	t1, t0, t1		/* clear CE[1:0] */
 	sw 	t1, 0x0840(a0)		/* mem_sdconfiga */
 	sync
-#endif
 
-	/* put power supply and processor to sleep */
-	sw	zero, 0x0078(t3)	/* sys_slppwr */
-	sync
-	sw	zero, 0x007c(t3)	/* sys_sleep */
-	sync
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
+	DO_SLEEP
+
+END(alchemy_sleep_au1550)
+
 
 	/* This is where we return upon wakeup.
 	 * Reload all of the registers and return.
 	 */
-3:	lw	k0, 0x20(sp)
+LEAF(alchemy_sleep_wakeup)
+	lw	k0, 0x20(sp)
 	mtc0	k0, CP0_STATUS
 	lw	k0, 0x1c(sp)
 	mtc0	k0, CP0_CONTEXT
@@ -169,4 +194,4 @@
 	lw	$31, PT_R31(sp)
 	jr	ra
 	 addiu	sp, PT_SIZE
-END(au1xxx_save_and_sleep)
+END(alchemy_sleep_wakeup)
diff -druN linux-libre-2.6.34-gnu/arch/mips/alchemy/devboards/pb1000/board_setup.c linux-libre-2.6.35-gnu/arch/mips/alchemy/devboards/pb1000/board_setup.c
--- linux-libre-2.6.34-gnu/arch/mips/alchemy/devboards/pb1000/board_setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/alchemy/devboards/pb1000/board_setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -27,8 +27,10 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/pm.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1000.h>
+#include <asm/reboot.h>
 #include <prom.h>
 
 #include "../platform.h"
@@ -38,8 +40,16 @@
 	return "Alchemy Pb1000";
 }
 
-void board_reset(void)
+static void board_reset(char *c)
+{
+	asm volatile ("jr %0" : : "r" (0xbfc00000));
+}
+
+static void board_power_off(void)
 {
+	printk(KERN_ALERT "It's now safe to remove power\n");
+	while (1)
+		asm volatile (".set mips3 ; wait ; .set mips1");
 }
 
 void __init board_setup(void)
@@ -177,6 +187,10 @@
 		au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
 		break;
 	}
+
+	pm_power_off = board_power_off;
+	_machine_halt = board_power_off;
+	_machine_restart = board_reset;
 }
 
 static int __init pb1000_init_irq(void)
diff -druN linux-libre-2.6.34-gnu/arch/mips/alchemy/devboards/pb1100/board_setup.c linux-libre-2.6.35-gnu/arch/mips/alchemy/devboards/pb1100/board_setup.c
--- linux-libre-2.6.34-gnu/arch/mips/alchemy/devboards/pb1100/board_setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/alchemy/devboards/pb1100/board_setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -39,11 +39,6 @@
 	return "Alchemy Pb1100";
 }
 
-void board_reset(void)
-{
-	bcsr_write(BCSR_SYSTEM, 0);
-}
-
 void __init board_setup(void)
 {
 	volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
diff -druN linux-libre-2.6.34-gnu/arch/mips/alchemy/devboards/pb1200/board_setup.c linux-libre-2.6.35-gnu/arch/mips/alchemy/devboards/pb1200/board_setup.c
--- linux-libre-2.6.34-gnu/arch/mips/alchemy/devboards/pb1200/board_setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/alchemy/devboards/pb1200/board_setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -48,12 +48,6 @@
 	return "Alchemy Pb1200";
 }
 
-void board_reset(void)
-{
-	bcsr_write(BCSR_RESETS, 0);
-	bcsr_write(BCSR_SYSTEM, 0);
-}
-
 void __init board_setup(void)
 {
 	printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
diff -druN linux-libre-2.6.34-gnu/arch/mips/alchemy/devboards/pb1500/board_setup.c linux-libre-2.6.35-gnu/arch/mips/alchemy/devboards/pb1500/board_setup.c
--- linux-libre-2.6.34-gnu/arch/mips/alchemy/devboards/pb1500/board_setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/alchemy/devboards/pb1500/board_setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -45,11 +45,6 @@
 	return "Alchemy Pb1500";
 }
 
-void board_reset(void)
-{
-	bcsr_write(BCSR_SYSTEM, 0);
-}
-
 void __init board_setup(void)
 {
 	u32 pin_func;
diff -druN linux-libre-2.6.34-gnu/arch/mips/alchemy/devboards/pb1550/board_setup.c linux-libre-2.6.35-gnu/arch/mips/alchemy/devboards/pb1550/board_setup.c
--- linux-libre-2.6.34-gnu/arch/mips/alchemy/devboards/pb1550/board_setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/alchemy/devboards/pb1550/board_setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -48,11 +48,6 @@
 	return "Alchemy Pb1550";
 }
 
-void board_reset(void)
-{
-	bcsr_write(BCSR_SYSTEM, 0);
-}
-
 void __init board_setup(void)
 {
 	u32 pin_func;
diff -druN linux-libre-2.6.34-gnu/arch/mips/alchemy/mtx-1/board_setup.c linux-libre-2.6.35-gnu/arch/mips/alchemy/mtx-1/board_setup.c
--- linux-libre-2.6.34-gnu/arch/mips/alchemy/mtx-1/board_setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/alchemy/mtx-1/board_setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -67,8 +67,6 @@
 
 void __init board_setup(void)
 {
-	alchemy_gpio2_enable();
-
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	/* Enable USB power switch */
 	alchemy_gpio_direction_output(204, 0);
@@ -117,11 +115,11 @@
 
 	if (assert && devsel != 0)
 		/* Suppress signal to Cardbus */
-		gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
+		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
 	else
-		gpio_set_value(1, 1);	/* set EXT_IO3 ON */
+		alchemy_gpio_set_value(1, 1);	/* set EXT_IO3 ON */
 
-	au_sync_udelay(1);
+	udelay(1);
 	return 1;
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/ar7/platform.c linux-libre-2.6.35-gnu/arch/mips/ar7/platform.c
--- linux-libre-2.6.34-gnu/arch/mips/ar7/platform.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/ar7/platform.c	2010-08-01 18:11:14.000000000 -0400
@@ -542,7 +542,7 @@
 	if (IS_ERR(bus_clk))
 		panic("unable to get bus clk\n");
 
-	uart_port.type		= PORT_16550A;
+	uart_port.type		= PORT_AR7;
 	uart_port.uartclk	= clk_get_rate(bus_clk) / 2;
 	uart_port.iotype	= UPIO_MEM32;
 	uart_port.regshift	= 2;
@@ -576,7 +576,6 @@
 {
 	void __iomem *bootcr;
 	u32 val;
-	u16 chip_id;
 	int res;
 
 	res = ar7_register_uarts();
@@ -635,18 +634,10 @@
 	val = readl(bootcr);
 	iounmap(bootcr);
 	if (val & AR7_WDT_HW_ENA) {
-		chip_id = ar7_chip_id();
-		switch (chip_id) {
-		case AR7_CHIP_7100:
-		case AR7_CHIP_7200:
-			ar7_wdt_res.start = AR7_REGS_WDT;
-			break;
-		case AR7_CHIP_7300:
+		if (ar7_has_high_vlynq())
 			ar7_wdt_res.start = UR8_REGS_WDT;
-			break;
-		default:
-			break;
-		}
+		else
+			ar7_wdt_res.start = AR7_REGS_WDT;
 
 		ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
 		res = platform_device_register(&ar7_wdt);
@@ -656,4 +647,4 @@
 
 	return 0;
 }
-arch_initcall(ar7_register_devices);
+device_initcall(ar7_register_devices);
diff -druN linux-libre-2.6.34-gnu/arch/mips/bcm47xx/Makefile linux-libre-2.6.35-gnu/arch/mips/bcm47xx/Makefile
--- linux-libre-2.6.34-gnu/arch/mips/bcm47xx/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/bcm47xx/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -3,4 +3,4 @@
 # under Linux.
 #
 
-obj-y := gpio.o irq.o prom.o serial.o setup.o time.o wgt634u.o
+obj-y := gpio.o irq.o nvram.o prom.o serial.o setup.o time.o wgt634u.o
diff -druN linux-libre-2.6.34-gnu/arch/mips/bcm47xx/nvram.c linux-libre-2.6.35-gnu/arch/mips/bcm47xx/nvram.c
--- linux-libre-2.6.34-gnu/arch/mips/bcm47xx/nvram.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/mips/bcm47xx/nvram.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,94 @@
+/*
+ * BCM947xx nvram variable access
+ *
+ * Copyright (C) 2005 Broadcom Corporation
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/ssb/ssb.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <asm/addrspace.h>
+#include <asm/mach-bcm47xx/nvram.h>
+#include <asm/mach-bcm47xx/bcm47xx.h>
+
+static char nvram_buf[NVRAM_SPACE];
+
+/* Probe for NVRAM header */
+static void __init early_nvram_init(void)
+{
+	struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore;
+	struct nvram_header *header;
+	int i;
+	u32 base, lim, off;
+	u32 *src, *dst;
+
+	base = mcore->flash_window;
+	lim = mcore->flash_window_size;
+
+	off = FLASH_MIN;
+	while (off <= lim) {
+		/* Windowed flash access */
+		header = (struct nvram_header *)
+			KSEG1ADDR(base + off - NVRAM_SPACE);
+		if (header->magic == NVRAM_HEADER)
+			goto found;
+		off <<= 1;
+	}
+
+	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
+	header = (struct nvram_header *) KSEG1ADDR(base + 4096);
+	if (header->magic == NVRAM_HEADER)
+		goto found;
+
+	header = (struct nvram_header *) KSEG1ADDR(base + 1024);
+	if (header->magic == NVRAM_HEADER)
+		goto found;
+
+	return;
+
+found:
+	src = (u32 *) header;
+	dst = (u32 *) nvram_buf;
+	for (i = 0; i < sizeof(struct nvram_header); i += 4)
+		*dst++ = *src++;
+	for (; i < header->len && i < NVRAM_SPACE; i += 4)
+		*dst++ = le32_to_cpu(*src++);
+}
+
+int nvram_getenv(char *name, char *val, size_t val_len)
+{
+	char *var, *value, *end, *eq;
+
+	if (!name)
+		return 1;
+
+	if (!nvram_buf[0])
+		early_nvram_init();
+
+	/* Look for name=value and return value */
+	var = &nvram_buf[sizeof(struct nvram_header)];
+	end = nvram_buf + sizeof(nvram_buf) - 2;
+	end[0] = end[1] = '\0';
+	for (; *var; var = value + strlen(value) + 1) {
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		value = eq + 1;
+		if ((eq - var) == strlen(name) &&
+			strncmp(var, name, (eq - var)) == 0) {
+			snprintf(val, val_len, "%s", value);
+			return 0;
+		}
+	}
+	return 1;
+}
+EXPORT_SYMBOL(nvram_getenv);
diff -druN linux-libre-2.6.34-gnu/arch/mips/bcm47xx/setup.c linux-libre-2.6.35-gnu/arch/mips/bcm47xx/setup.c
--- linux-libre-2.6.34-gnu/arch/mips/bcm47xx/setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/bcm47xx/setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,8 +1,8 @@
 /*
  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
- *  Copyright (C) 2005 Waldemar Brodkorb <wbx@openwrt.org>
  *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
  *  Copyright (C) 2006 Michael Buesch <mb@bu3sch.de>
+ *  Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -33,6 +33,7 @@
 #include <asm/time.h>
 #include <bcm47xx.h>
 #include <asm/fw/cfe/cfe_api.h>
+#include <asm/mach-bcm47xx/nvram.h>
 
 struct ssb_bus ssb_bcm47xx;
 EXPORT_SYMBOL(ssb_bcm47xx);
@@ -81,28 +82,42 @@
 	/* Fill boardinfo structure */
 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
 
-	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
 
 	/* Fill sprom structure */
 	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
 	iv->sprom.revision = 3;
 
-	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
 		str2eaddr(buf, iv->sprom.et0mac);
-	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+
+	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
 		str2eaddr(buf, iv->sprom.et1mac);
-	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 10);
-	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 10);
-	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
+
+	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
+		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
+
+	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
+		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
+
+	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
 		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
-	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
+
+	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
+	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
 		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
 
 	return 0;
diff -druN linux-libre-2.6.34-gnu/arch/mips/bcm63xx/dev-enet.c linux-libre-2.6.35-gnu/arch/mips/bcm63xx/dev-enet.c
--- linux-libre-2.6.34-gnu/arch/mips/bcm63xx/dev-enet.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/bcm63xx/dev-enet.c	2010-08-01 18:11:14.000000000 -0400
@@ -104,6 +104,9 @@
 	if (unit > 1)
 		return -ENODEV;
 
+	if (unit == 1 && BCMCPU_IS_6338())
+		return -ENODEV;
+
 	if (!shared_device_registered) {
 		shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
 		shared_res[0].end = shared_res[0].start;
diff -druN linux-libre-2.6.34-gnu/arch/mips/bcm63xx/gpio.c linux-libre-2.6.35-gnu/arch/mips/bcm63xx/gpio.c
--- linux-libre-2.6.34-gnu/arch/mips/bcm63xx/gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/bcm63xx/gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -91,7 +91,7 @@
 
 	spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
 	tmp = bcm_gpio_readl(reg);
-	if (dir == GPIO_DIR_IN)
+	if (dir == BCM63XX_GPIO_DIR_IN)
 		tmp &= ~mask;
 	else
 		tmp |= mask;
@@ -103,14 +103,14 @@
 
 static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 {
-	return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_IN);
+	return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN);
 }
 
 static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
 					 unsigned gpio, int value)
 {
 	bcm63xx_gpio_set(chip, gpio, value);
-	return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_OUT);
+	return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT);
 }
 
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/cavium-octeon/serial.c linux-libre-2.6.35-gnu/arch/mips/cavium-octeon/serial.c
--- linux-libre-2.6.34-gnu/arch/mips/cavium-octeon/serial.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/cavium-octeon/serial.c	2010-08-01 18:11:14.000000000 -0400
@@ -65,7 +65,11 @@
 	p->type = PORT_OCTEON;
 	p->iotype = UPIO_MEM;
 	p->regshift = 3;	/* I/O addresses are every 8 bytes */
-	p->uartclk = mips_hpt_frequency;
+	if (octeon_is_simulation())
+		/* Make simulator output fast*/
+		p->uartclk = 115200 * 16;
+	else
+		p->uartclk = mips_hpt_frequency;
 	p->serial_in = octeon_serial_in;
 	p->serial_out = octeon_serial_out;
 }
diff -druN linux-libre-2.6.34-gnu/arch/mips/cavium-octeon/setup.c linux-libre-2.6.35-gnu/arch/mips/cavium-octeon/setup.c
--- linux-libre-2.6.34-gnu/arch/mips/cavium-octeon/setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/cavium-octeon/setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -403,7 +403,6 @@
 	const int coreid = cvmx_get_core_num();
 	int i;
 	int argc;
-	struct uart_port octeon_port;
 #ifdef CONFIG_CAVIUM_RESERVE32
 	int64_t addr = -1;
 #endif
@@ -610,30 +609,6 @@
 	_machine_restart = octeon_restart;
 	_machine_halt = octeon_halt;
 
-	memset(&octeon_port, 0, sizeof(octeon_port));
-	/*
-	 * For early_serial_setup we don't set the port type or
-	 * UPF_FIXED_TYPE.
-	 */
-	octeon_port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ;
-	octeon_port.iotype = UPIO_MEM;
-	/* I/O addresses are every 8 bytes */
-	octeon_port.regshift = 3;
-	/* Clock rate of the chip */
-	octeon_port.uartclk = mips_hpt_frequency;
-	octeon_port.fifosize = 64;
-	octeon_port.mapbase = 0x0001180000000800ull + (1024 * octeon_uart);
-	octeon_port.membase = cvmx_phys_to_ptr(octeon_port.mapbase);
-	octeon_port.serial_in = octeon_serial_in;
-	octeon_port.serial_out = octeon_serial_out;
-#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
-	octeon_port.line = 0;
-#else
-	octeon_port.line = octeon_uart;
-#endif
-	octeon_port.irq = 42 + octeon_uart;
-	early_serial_setup(&octeon_port);
-
 	octeon_user_io_init();
 	register_smp_ops(&octeon_smp_ops);
 }
@@ -727,7 +702,7 @@
 	} while ((lsrval & 0x20) == 0);
 
 	/* Write the byte */
-	cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c);
+	cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c & 0xffull);
 	return 1;
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/configs/ar7_defconfig linux-libre-2.6.35-gnu/arch/mips/configs/ar7_defconfig
--- linux-libre-2.6.34-gnu/arch/mips/configs/ar7_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/configs/ar7_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Wed Jun 24 14:08:59 2009
+# Linux kernel version: 2.6.34-rc6
+# Sat May  1 11:35:01 2010
 #
 CONFIG_MIPS=y
 
@@ -11,11 +11,12 @@
 # CONFIG_MACH_ALCHEMY is not set
 CONFIG_AR7=y
 # CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_NEC_MARKEINS is not set
@@ -26,6 +27,7 @@
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP28 is not set
@@ -46,6 +48,7 @@
 # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
 # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
 # CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -63,10 +66,8 @@
 CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -81,7 +82,8 @@
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -103,6 +105,8 @@
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
 # CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
@@ -124,6 +128,7 @@
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -141,8 +146,7 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -165,6 +169,7 @@
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -174,6 +179,14 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -186,14 +199,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
 # CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -204,6 +215,7 @@
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -225,19 +237,22 @@
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
@@ -248,7 +263,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -256,14 +271,41 @@
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -293,7 +335,6 @@
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -377,6 +418,7 @@
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 # CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_LED is not set
@@ -458,6 +500,7 @@
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 CONFIG_ATM=m
 # CONFIG_ATM_CLIP is not set
@@ -466,6 +509,7 @@
 CONFIG_ATM_BR2684_IPFILTER=y
 CONFIG_STP=y
 CONFIG_BRIDGE=y
+CONFIG_BRIDGE_IGMP_SNOOPING=y
 # CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=y
 # CONFIG_VLAN_8021Q_GVRP is not set
@@ -541,20 +585,19 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
 CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
 # CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-CONFIG_MAC80211_DEFAULT_PS=y
-CONFIG_MAC80211_DEFAULT_PS_VALUE=1
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_MINSTREL=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
@@ -576,6 +619,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -585,9 +629,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -636,6 +680,7 @@
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -668,6 +713,10 @@
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
@@ -687,6 +736,7 @@
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -727,6 +777,7 @@
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -737,23 +788,21 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_CPMAC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
+CONFIG_WLAN=y
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_HOSTAP is not set
+# CONFIG_ATH_COMMON is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -813,6 +862,7 @@
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -824,11 +874,39 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -842,13 +920,7 @@
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB=y
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_DRIVER_EXTIF=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -882,15 +954,18 @@
 #
 # LED drivers
 #
-# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
@@ -921,6 +996,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -984,6 +1060,7 @@
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
 # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
 # CONFIG_SQUASHFS_EMBEDDED is not set
@@ -996,11 +1073,11 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1039,21 +1116,29 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
 # CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_SPINLOCK_TEST is not set
 
 #
 # Security options
@@ -1061,13 +1146,16 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_ALGAPI2=m
 CONFIG_CRYPTO_AEAD2=m
@@ -1108,11 +1196,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff -druN linux-libre-2.6.34-gnu/arch/mips/configs/bcm47xx_defconfig linux-libre-2.6.35-gnu/arch/mips/configs/bcm47xx_defconfig
--- linux-libre-2.6.34-gnu/arch/mips/configs/bcm47xx_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/configs/bcm47xx_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Mon Feb 18 11:55:24 2008
+# Linux kernel version: 2.6.34-rc6
+# Sat May  1 12:14:30 2010
 #
 CONFIG_MIPS=y
 
@@ -9,20 +9,25 @@
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
 CONFIG_BCM47XX=y
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_NEC_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP28 is not set
@@ -36,10 +41,14 @@
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -50,16 +59,16 @@
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
 CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_CFE=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -71,7 +80,8 @@
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -84,6 +94,7 @@
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -91,11 +102,13 @@
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -105,11 +118,13 @@
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -122,12 +137,13 @@
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -144,12 +160,12 @@
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_KEXEC=y
 # CONFIG_SECCOMP is not set
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -163,6 +179,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_TASKSTATS=y
@@ -170,25 +187,37 @@
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 CONFIG_CGROUP_NS=y
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CPUSETS is not set
 CONFIG_CGROUP_CPUACCT=y
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -197,54 +226,90 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-CONFIG_PROC_PAGE_MONITOR=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_LSF=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
+# CONFIG_CFQ_GROUP_IOSCHED is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -253,7 +318,8 @@
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -262,31 +328,30 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -315,7 +380,7 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=m
 CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_ADVANCED=y
@@ -339,36 +404,6 @@
 # CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="bic"
 # CONFIG_TCP_MD5SIG is not set
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -384,9 +419,12 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -404,6 +442,7 @@
 CONFIG_NF_CONNTRACK_MARK=y
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
 CONFIG_NF_CT_PROTO_GRE=m
 CONFIG_NF_CT_PROTO_SCTP=m
 CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -417,20 +456,25 @@
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -439,20 +483,23 @@
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 # CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -460,20 +507,53 @@
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+# CONFIG_IP_VS_PROTO_SCTP is not set
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -481,10 +561,13 @@
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
 CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
@@ -493,9 +576,9 @@
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -507,24 +590,20 @@
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -533,6 +612,7 @@
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+# CONFIG_BRIDGE_EBT_IP6 is not set
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -545,31 +625,30 @@
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_ULOG=m
+# CONFIG_BRIDGE_EBT_NFLOG is not set
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_CCID3=y
 # CONFIG_IP_DCCP_CCID3_DEBUG is not set
 CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_DCCP_TFRC_LIB=y
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
 CONFIG_TIPC=m
 CONFIG_TIPC_ADVANCED=y
 CONFIG_TIPC_ZONES=3
 CONFIG_TIPC_CLUSTERS=1
 CONFIG_TIPC_NODES=255
-CONFIG_TIPC_SLAVE_NODES=0
 CONFIG_TIPC_PORTS=8191
 CONFIG_TIPC_LOG=0
 # CONFIG_TIPC_DEBUG is not set
@@ -580,8 +659,12 @@
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -591,6 +674,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -601,7 +686,7 @@
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -609,6 +694,7 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 CONFIG_NET_SCH_INGRESS=m
 
 #
@@ -626,6 +712,7 @@
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_CGROUP is not set
 CONFIG_NET_EMATCH=y
 CONFIG_NET_EMATCH_STACK=32
 CONFIG_NET_EMATCH_CMP=m
@@ -642,8 +729,10 @@
 CONFIG_NET_ACT_NAT=m
 CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
+# CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -651,58 +740,7 @@
 CONFIG_NET_PKTGEN=m
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-CONFIG_DONGLE=y
-CONFIG_ESI_DONGLE=m
-CONFIG_ACTISYS_DONGLE=m
-CONFIG_TEKRAM_DONGLE=m
-CONFIG_TOIM3232_DONGLE=m
-CONFIG_LITELINK_DONGLE=m
-CONFIG_MA600_DONGLE=m
-CONFIG_GIRBIL_DONGLE=m
-CONFIG_MCP2120_DONGLE=m
-CONFIG_OLD_BELKIN_DONGLE=m
-CONFIG_ACT200L_DONGLE=m
-CONFIG_KINGSUN_DONGLE=m
-CONFIG_KSDAZZLE_DONGLE=m
-CONFIG_KS959_DONGLE=m
-
-#
-# FIR device drivers
-#
-CONFIG_USB_IRDA=m
-CONFIG_SIGMATEL_FIR=m
-CONFIG_TOSHIBA_FIR=m
-CONFIG_VLSI_FIR=m
-CONFIG_MCS_FIR=m
+# CONFIG_IRDA is not set
 CONFIG_BT=m
 # CONFIG_BT_L2CAP is not set
 # CONFIG_BT_SCO is not set
@@ -710,8 +748,7 @@
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -720,51 +757,37 @@
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
 CONFIG_BT_HCIVHCI=m
+# CONFIG_BT_MRVL is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
 CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_SIMPLE is not set
+CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
 CONFIG_RFKILL=m
-CONFIG_RFKILL_INPUT=m
 CONFIG_RFKILL_LEDS=y
-CONFIG_NET_9P=m
-CONFIG_NET_9P_FD=m
-# CONFIG_NET_9P_DEBUG is not set
+CONFIG_RFKILL_INPUT=y
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -774,17 +797,22 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -829,9 +857,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -854,6 +880,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -866,6 +897,7 @@
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -875,18 +907,27 @@
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -904,10 +945,6 @@
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
@@ -924,21 +961,30 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -954,7 +1000,12 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -962,11 +1013,18 @@
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
@@ -990,8 +1048,11 @@
 CONFIG_BROADCOM_PHY=m
 CONFIG_ICPLUS_PHY=m
 # CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_MDIO_BITBANG=m
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
@@ -999,24 +1060,31 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 CONFIG_B44=y
 CONFIG_B44_PCI_AUTOSELECT=y
 CONFIG_B44_PCICORE_AUTOSELECT=y
 CONFIG_B44_PCI=y
 # CONFIG_FORCEDETH is not set
 # CONFIG_TC35815 is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -1026,41 +1094,67 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_PRISM54 is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
-# CONFIG_P54_COMMON is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
 CONFIG_ATH5K=m
-# CONFIG_IWL4965 is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_ATH5K_DEBUG is not set
+# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
+CONFIG_B43=m
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+CONFIG_B43_PIO=y
+CONFIG_B43_PHY_LP=y
+CONFIG_B43_LEDS=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
+CONFIG_B43LEGACY_DEBUG=y
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
 # CONFIG_HOSTAP is not set
-# CONFIG_BCM43XX is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
 CONFIG_ZD1211RW=m
 # CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_RT2X00 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -1072,7 +1166,10 @@
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
 CONFIG_USB_NET_DM9601=m
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_SMSC95XX is not set
 CONFIG_USB_NET_GL620A=m
 CONFIG_USB_NET_NET1080=m
 CONFIG_USB_NET_PLUSB=m
@@ -1086,6 +1183,10 @@
 CONFIG_USB_EPSON2888=y
 CONFIG_USB_KC2190=y
 CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+CONFIG_USB_SIERRA_NET=m
 # CONFIG_WAN is not set
 CONFIG_ATM_DRIVERS=y
 CONFIG_ATM_DUMMY=m
@@ -1099,8 +1200,9 @@
 # CONFIG_ATM_AMBASSADOR is not set
 # CONFIG_ATM_HORIZON is not set
 # CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_FORE200E is not set
 # CONFIG_ATM_HE is not set
+# CONFIG_ATM_SOLOS is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PPP=m
@@ -1120,11 +1222,10 @@
 # CONFIG_SLIP_SMART is not set
 # CONFIG_SLIP_MODE_SLIP6 is not set
 # CONFIG_NET_FC is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -1134,6 +1235,7 @@
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -1166,6 +1268,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -1185,23 +1288,24 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
+# CONFIG_SPI is not set
 
 #
-# SPI support
+# PPS support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_PPS is not set
 CONFIG_W1=m
 CONFIG_W1_CON=y
 
@@ -1217,21 +1321,45 @@
 #
 CONFIG_W1_SLAVE_THERM=m
 CONFIG_W1_SLAVE_SMEM=m
+# CONFIG_W1_SLAVE_DS2431 is not set
 CONFIG_W1_SLAVE_DS2433=m
 # CONFIG_W1_SLAVE_DS2433_CRC is not set
 CONFIG_W1_SLAVE_DS2760=m
+# CONFIG_W1_SLAVE_BQ27000 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# Sonics Silicon Backplane
+# Watchdog Device Drivers
 #
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_BCM47XX_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
 CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
 # CONFIG_SSB_SILENT is not set
 # CONFIG_SSB_DEBUG is not set
 CONFIG_SSB_SERIAL=y
@@ -1239,24 +1367,26 @@
 CONFIG_SSB_DRIVER_PCICORE=y
 CONFIG_SSB_PCICORE_HOSTMODE=y
 CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_EMBEDDED=y
 CONFIG_SSB_DRIVER_EXTIF=y
+CONFIG_SSB_DRIVER_GIGE=y
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1271,15 +1401,9 @@
 #
 # Display hardware drivers
 #
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1292,24 +1416,24 @@
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -1318,6 +1442,7 @@
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -1325,6 +1450,8 @@
 # CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1337,6 +1464,8 @@
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1353,6 +1482,7 @@
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1368,45 +1498,22 @@
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA MIPS devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_MIPS=y
+CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 CONFIG_USB_HIDDEV=y
 
 #
@@ -1414,6 +1521,41 @@
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1429,14 +1571,24 @@
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_SSB is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1446,26 +1598,30 @@
 CONFIG_USB_U132_HCD=m
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 # CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
 CONFIG_USB_STORAGE_USBAT=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
@@ -1473,6 +1629,7 @@
 CONFIG_USB_STORAGE_ALAUDA=y
 CONFIG_USB_STORAGE_ONETOUCH=y
 CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1480,7 +1637,6 @@
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1489,13 +1645,12 @@
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_AIRPRIME=m
 CONFIG_USB_SERIAL_ARK3116=m
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_CH341=m
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP2101=m
+# CONFIG_USB_SERIAL_CP210X is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1515,18 +1670,26 @@
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_MOS7720=m
 CONFIG_USB_SERIAL_MOS7840=m
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_OTI6858=m
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
 # CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
 # CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OPTION=m
 CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
 CONFIG_USB_SERIAL_DEBUG=m
 
 #
@@ -1535,18 +1698,13 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 CONFIG_USB_ADUTUX=m
-CONFIG_USB_AUERSWALD=m
+# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-CONFIG_USB_BERRY_CHARGE=m
 CONFIG_USB_LED=m
 CONFIG_USB_CYPRESS_CY7C63=m
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGET=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETMOTORCONTROL=m
-CONFIG_USB_PHIDGETSERVO=m
 CONFIG_USB_IDMOUSE=m
 CONFIG_USB_FTDI_ELAN=m
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1555,6 +1713,7 @@
 CONFIG_USB_TRANCEVIBRATOR=m
 CONFIG_USB_IOWARRIOR=m
 CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
 CONFIG_USB_CXACRU=m
@@ -1563,30 +1722,51 @@
 CONFIG_USB_GADGET=m
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 # CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_NET2280=m
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=m
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1596,21 +1776,33 @@
 # LED drivers
 #
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Userspace I/O
+# TI VLYNQ
 #
-# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1621,10 +1813,11 @@
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1642,28 +1835,39 @@
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
+# CONFIG_XFS_DEBUG is not set
 CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_GFS2_FS_LOCKING_DLM is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+CONFIG_QUOTA_TREE=m
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
 CONFIG_QUOTACTL=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=m
@@ -1690,15 +1894,13 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1721,12 +1923,19 @@
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
@@ -1736,13 +1945,12 @@
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFS_V4_1 is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1750,10 +1958,10 @@
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
@@ -1771,9 +1979,7 @@
 CONFIG_NCPFS_NLS=y
 CONFIG_NCPFS_EXTRAS=y
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
-CONFIG_9P_FS=m
 
 #
 # Partition Types
@@ -1846,90 +2052,167 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LKDTM is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_SPINLOCK_TEST is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 # CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 CONFIG_CRC7=m
 CONFIG_LIBCRC32C=m
 CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/mips/configs/mtx1_defconfig linux-libre-2.6.35-gnu/arch/mips/configs/mtx1_defconfig
--- linux-libre-2.6.34-gnu/arch/mips/configs/mtx1_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/configs/mtx1_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc8
-# Sun Sep 30 12:56:10 2007
+# Linux kernel version: 2.6.34-rc6
+# Sat May  1 13:39:10 2010
 #
 CONFIG_MIPS=y
 
@@ -9,20 +9,28 @@
 # Machine selection
 #
 CONFIG_MACH_ALCHEMY=y
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_NEC_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -33,10 +41,14 @@
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 CONFIG_MIPS_MTX1=y
 # CONFIG_MIPS_BOSPORUS is not set
 # CONFIG_MIPS_DB1000 is not set
@@ -53,29 +65,38 @@
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_SOC_AU1500=y
 CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
 # CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -88,6 +109,7 @@
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -95,11 +117,14 @@
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -109,28 +134,36 @@
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
 CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -148,6 +181,7 @@
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -157,23 +191,49 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -182,61 +242,104 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -251,6 +354,7 @@
 CONFIG_PD6729=m
 CONFIG_I82092=m
 # CONFIG_PCMCIA_AU1X00 is not set
+# CONFIG_PCMCIA_ALCHEMY_DEVBOARD is not set
 CONFIG_PCCARD_NONSTATIC=m
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -258,35 +362,38 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
 # CONFIG_APM_EMULATION is not set
-
-#
-# Networking
-#
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -315,42 +422,13 @@
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -366,12 +444,15 @@
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETLABEL is not set
+# CONFIG_IPV6_MROUTE is not set
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 CONFIG_BRIDGE_NETFILTER=y
 
 #
@@ -380,57 +461,97 @@
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK_ENABLED is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
 # CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+# CONFIG_IP_VS_PROTO_SCTP is not set
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -439,34 +560,29 @@
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 # CONFIG_IP6_NF_MATCH_MH is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
 
 #
 # DECnet: Netfilter Configuration
 #
 CONFIG_DECNET_NF_GRABULATOR=m
-
-#
-# Bridge: Netfilter Configuration
-#
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -475,6 +591,7 @@
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+# CONFIG_BRIDGE_EBT_IP6 is not set
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -487,25 +604,25 @@
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_ULOG=m
+# CONFIG_BRIDGE_EBT_NFLOG is not set
 CONFIG_IP_DCCP=m
 CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
 
 #
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_DCCP_CCID3=y
 # CONFIG_IP_DCCP_CCID3_DEBUG is not set
 CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
 CONFIG_TIPC=m
 # CONFIG_TIPC_ADVANCED is not set
 # CONFIG_TIPC_DEBUG is not set
@@ -516,8 +633,12 @@
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 CONFIG_DECNET=m
 # CONFIG_DECNET_ROUTER is not set
 CONFIG_LLC=y
@@ -535,12 +656,9 @@
 CONFIG_ECONET_AUNUDP=y
 CONFIG_ECONET_NATIVE=y
 CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
 
 #
 # Queueing/Scheduling
@@ -550,7 +668,7 @@
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
+# CONFIG_NET_SCH_MULTIQ is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -558,6 +676,7 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 CONFIG_NET_SCH_INGRESS=m
 
 #
@@ -574,6 +693,7 @@
 CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
 CONFIG_NET_EMATCH=y
 CONFIG_NET_EMATCH_STACK=32
 CONFIG_NET_EMATCH_CMP=m
@@ -586,10 +706,13 @@
 # CONFIG_NET_ACT_GACT is not set
 # CONFIG_NET_ACT_MIRRED is not set
 # CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_NAT is not set
 # CONFIG_NET_ACT_PEDIT is not set
 # CONFIG_NET_ACT_SIMP is not set
-CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_ACT_SKBEDIT is not set
 # CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -613,9 +736,8 @@
 CONFIG_BPQETHER=m
 CONFIG_BAYCOM_SER_FDX=m
 CONFIG_BAYCOM_SER_HDX=m
-CONFIG_BAYCOM_PAR=m
-CONFIG_BAYCOM_EPP=m
 CONFIG_YAM=m
+# CONFIG_CAN is not set
 CONFIG_IRDA=m
 
 #
@@ -657,15 +779,8 @@
 CONFIG_OLD_BELKIN_DONGLE=m
 CONFIG_ACT200L_DONGLE=m
 # CONFIG_KINGSUN_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
 
 #
 # FIR device drivers
@@ -683,17 +798,17 @@
 CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
 CONFIG_BT_HIDP=m
 
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
 CONFIG_BT_HCIBCM203X=m
 CONFIG_BT_HCIBPA10X=m
 CONFIG_BT_HCIBFUSB=m
@@ -702,24 +817,19 @@
 CONFIG_BT_HCIBLUECARD=m
 CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
+# CONFIG_BT_MRVL is not set
 CONFIG_AF_RXRPC=m
 # CONFIG_AF_RXRPC_DEBUG is not set
 # CONFIG_RXKAD is not set
 CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -730,40 +840,43 @@
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
-CONFIG_MTD=m
+CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=m
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -775,206 +888,81 @@
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
 
 #
 # Mapping drivers for chip access
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ALCHEMY is not set
-# CONFIG_MTD_MTX1 is not set
-CONFIG_MTD_PCI=m
-CONFIG_MTD_PLATRAM=m
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
-CONFIG_MTD_PMC551=m
-# CONFIG_MTD_PMC551_BUGFIX is not set
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_DATAFLASH=m
-CONFIG_MTD_M25P80=m
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLOCK2MTD=m
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
 
 #
 # Disk-On-Chip Device Drivers
 #
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_CAFE is not set
-CONFIG_MTD_NAND_NANDSIM=m
-# CONFIG_MTD_NAND_PLATFORM is not set
-CONFIG_MTD_ONENAND=m
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND_OTP is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
-CONFIG_PARPORT_PC_PCMCIA=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_AX88796=m
-CONFIG_PARPORT_1284=y
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_BLK_DEV=y
-CONFIG_PARIDE=m
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel IDE high-level drivers
+# LPDDR flash memory drivers
 #
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Parallel IDE protocol modules
+# UBI - Unsorted block images
 #
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_BPCK6=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPATC8=y
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=m
-CONFIG_BLK_CPQ_CISS_DA=m
-CONFIG_CISS_SCSI_TAPE=y
-CONFIG_BLK_DEV_DAC960=m
-CONFIG_BLK_DEV_UMEM=m
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
 CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_SGI_IOC4=m
-CONFIG_TIFM_CORE=m
-CONFIG_TIFM_7XX1=m
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECS=m
-# CONFIG_BLK_DEV_DELKIN is not set
-CONFIG_BLK_DEV_IDECD=m
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=m
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_AEC62XX=m
-CONFIG_BLK_DEV_ALI15X3=m
-# CONFIG_WDC_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=m
-CONFIG_BLK_DEV_CMD64X=m
-CONFIG_BLK_DEV_TRIFLEX=m
-CONFIG_BLK_DEV_CY82C693=m
-# CONFIG_BLK_DEV_CS5520 is not set
-CONFIG_BLK_DEV_CS5530=m
-CONFIG_BLK_DEV_HPT34X=m
-# CONFIG_HPT34X_AUTODMA is not set
-CONFIG_BLK_DEV_HPT366=m
-# CONFIG_BLK_DEV_JMICRON is not set
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=m
-# CONFIG_BLK_DEV_IT8213 is not set
-CONFIG_BLK_DEV_IT821X=m
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=m
-CONFIG_PDC202XX_BURST=y
-CONFIG_BLK_DEV_PDC202XX_NEW=m
-CONFIG_BLK_DEV_SVWKS=m
-CONFIG_BLK_DEV_SIIMAGE=m
-# CONFIG_BLK_DEV_SLC90E66 is not set
-CONFIG_BLK_DEV_TRM290=m
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 # CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_TIFM_CORE=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=m
+CONFIG_SCSI_MOD=m
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
@@ -985,18 +973,13 @@
 # SCSI support type (disk, tape, CD-ROM)
 #
 CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
+# CONFIG_CHR_DEV_SCH is not set
 CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
 # CONFIG_SCSI_SCAN_ASYNC is not set
 CONFIG_SCSI_WAIT_SCAN=m
@@ -1009,198 +992,39 @@
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_ATA is not set
+CONFIG_SCSI_SAS_HOST_SMP=y
 # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-CONFIG_AIC79XX_DEBUG_ENABLE=y
-CONFIG_AIC79XX_DEBUG_MASK=0
-CONFIG_AIC79XX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-CONFIG_SCSI_DPT_I2O=m
-CONFIG_SCSI_ARCMSR=m
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-CONFIG_MEGARAID_LEGACY=m
-CONFIG_MEGARAID_SAS=m
-CONFIG_SCSI_HPTIOP=m
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_FUTURE_DOMAIN=m
-CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_STEX=m
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-CONFIG_SCSI_IPR=m
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_SCSI_QLA_FC=m
-CONFIG_SCSI_QLA_ISCSI=m
-CONFIG_SCSI_LPFC=m
-CONFIG_SCSI_DC395x=m
-CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_NSP32=m
-CONFIG_SCSI_DEBUG=m
-# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-CONFIG_ATA=m
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_AHCI=m
-CONFIG_SATA_SVW=m
-CONFIG_ATA_PIIX=m
-CONFIG_SATA_MV=m
-CONFIG_SATA_NV=m
-CONFIG_PDC_ADMA=m
-CONFIG_SATA_QSTOR=m
-CONFIG_SATA_PROMISE=m
-CONFIG_SATA_SX4=m
-CONFIG_SATA_SIL=m
-CONFIG_SATA_SIL24=m
-CONFIG_SATA_SIS=m
-CONFIG_SATA_ULI=m
-CONFIG_SATA_VIA=m
-CONFIG_SATA_VITESSE=m
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-CONFIG_PATA_CS5520=m
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-CONFIG_PATA_EFAR=m
-CONFIG_ATA_GENERIC=m
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-CONFIG_PATA_JMICRON=m
-CONFIG_PATA_TRIFLEX=m
-# CONFIG_PATA_MARVELL is not set
-CONFIG_PATA_MPIIX=m
-# CONFIG_PATA_OLDPIIX is not set
-CONFIG_PATA_NETCELL=m
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-CONFIG_PATA_PCMCIA=m
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-CONFIG_PATA_RZ1000=m
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-CONFIG_PATA_PDC2027X=m
-CONFIG_PATA_SIL680=m
-CONFIG_PATA_SIS=m
-CONFIG_PATA_VIA=m
-CONFIG_PATA_WINBOND=m
-# CONFIG_PATA_PLATFORM is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=m
-CONFIG_FUSION_FC=m
-CONFIG_FUSION_SAS=m
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LAN=m
-# CONFIG_FUSION_LOGGING is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
 
 #
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-
-#
-# Controllers
+# You can enable one or both FireWire driver stacks.
 #
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_OHCI1394=m
 
 #
-# Protocols
+# The newer stack is recommended.
 #
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_I2O=m
-CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
-CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_CONFIG=m
-CONFIG_I2O_CONFIG_OLD_IOCTL=y
-CONFIG_I2O_BUS=m
-CONFIG_I2O_BLOCK=m
-CONFIG_I2O_SCSI=m
-CONFIG_I2O_PROC=m
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
+# CONFIG_VETH is not set
 CONFIG_ARCNET=m
 CONFIG_ARCNET_1201=m
 CONFIG_ARCNET_1051=m
@@ -1225,9 +1049,11 @@
 CONFIG_SMSC_PHY=m
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
-CONFIG_FIXED_PHY=m
-# CONFIG_FIXED_MII_10_FDX is not set
-# CONFIG_FIXED_MII_100_FDX is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_AX88796 is not set
@@ -1240,8 +1066,12 @@
 CONFIG_TYPHOON=m
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=m
+CONFIG_DE2104X_DSL=0
 CONFIG_TULIP=m
 # CONFIG_TULIP_MWI is not set
 # CONFIG_TULIP_MMIO is not set
@@ -1251,21 +1081,26 @@
 CONFIG_DM9102=m
 CONFIG_ULI526X=m
 CONFIG_PCMCIA_XIRCOM=m
-# CONFIG_PCMCIA_XIRTULIP is not set
 CONFIG_HP100=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
 CONFIG_AMD8111_ETH=m
-# CONFIG_AMD8111E_NAPI is not set
 CONFIG_ADAPTEC_STARFIRE=m
-# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
+# CONFIG_KSZ884X_PCI is not set
 CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
 CONFIG_FORCEDETH=m
 # CONFIG_FORCEDETH_NAPI is not set
 # CONFIG_TC35815 is not set
-CONFIG_DGRS=m
-CONFIG_EEPRO100=m
 CONFIG_E100=m
 CONFIG_FEALNX=m
 CONFIG_NATSEMI=m
@@ -1276,52 +1111,71 @@
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 CONFIG_8139TOO_8129=y
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 CONFIG_SIS900=m
 CONFIG_EPIC100=m
+# CONFIG_SMSC9420 is not set
 CONFIG_SUNDANCE=m
 # CONFIG_SUNDANCE_MMIO is not set
 CONFIG_TLAN=m
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_VIA_RHINE=m
 # CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_VIA_RHINE_NAPI is not set
 # CONFIG_SC92031 is not set
-CONFIG_NET_POCKET=y
-CONFIG_DE600=m
-CONFIG_DE620=m
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_ACENIC=m
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 CONFIG_DL2K=m
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 CONFIG_NS83820=m
 CONFIG_HAMACHI=m
 CONFIG_YELLOWFIN=m
 CONFIG_R8169=m
-# CONFIG_R8169_NAPI is not set
 CONFIG_R8169_VLAN=y
 CONFIG_SIS190=m
 CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
 CONFIG_SKY2=m
-CONFIG_SK98LIN=m
+# CONFIG_SKY2_DEBUG is not set
 CONFIG_VIA_VELOCITY=m
 CONFIG_TIGON3=m
 CONFIG_BNX2=m
+# CONFIG_CNIC is not set
 CONFIG_QLA3XXX=m
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
+CONFIG_MDIO=m
 CONFIG_CHELSIO_T1=m
 # CONFIG_CHELSIO_T1_1G is not set
-CONFIG_CHELSIO_T1_NAPI=y
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
 CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
+# CONFIG_VXGE is not set
 CONFIG_MYRI10GE=m
 # CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 CONFIG_TR=y
 CONFIG_IBMOL=m
 CONFIG_IBMLS=m
@@ -1329,12 +1183,18 @@
 CONFIG_TMS380TR=m
 CONFIG_TMSPCI=m
 CONFIG_ABYSS=m
+CONFIG_WLAN=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
 
 #
 # USB Network Adapters
@@ -1343,11 +1203,13 @@
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET_MII=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
 # CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_SMSC95XX is not set
 CONFIG_USB_NET_GL620A=m
 CONFIG_USB_NET_NET1080=m
 CONFIG_USB_NET_PLUSB=m
@@ -1361,6 +1223,9 @@
 CONFIG_USB_EPSON2888=y
 # CONFIG_USB_KC2190 is not set
 CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_IPHETH is not set
+CONFIG_USB_SIERRA_NET=m
 CONFIG_NET_PCMCIA=y
 CONFIG_PCMCIA_3C589=m
 CONFIG_PCMCIA_3C574=m
@@ -1383,16 +1248,6 @@
 CONFIG_HDLC_X25=m
 CONFIG_PCI200SYN=m
 CONFIG_WANXL=m
-CONFIG_PC300=m
-CONFIG_PC300_MLPPP=y
-
-#
-# Cyclades-PC300 MLPPP support is disabled.
-#
-
-#
-# Refer to the file README.mlppp, provided by PC300 package.
-#
 # CONFIG_PC300TOO is not set
 CONFIG_FARSYNC=m
 CONFIG_DSCC4=m
@@ -1428,15 +1283,13 @@
 # CONFIG_ATM_HORIZON_DEBUG is not set
 CONFIG_ATM_IA=m
 # CONFIG_ATM_IA_DEBUG is not set
-CONFIG_ATM_FORE200E_MAYBE=m
-CONFIG_ATM_FORE200E_PCA=y
-CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
+CONFIG_ATM_FORE200E=m
 # CONFIG_ATM_FORE200E_USE_TASKLET is not set
 CONFIG_ATM_FORE200E_TX_RETRY=16
 CONFIG_ATM_FORE200E_DEBUG=0
-CONFIG_ATM_FORE200E=m
 CONFIG_ATM_HE=m
 CONFIG_ATM_HE_USE_SUNI=y
+# CONFIG_ATM_SOLOS is not set
 CONFIG_FDDI=y
 CONFIG_DEFXX=m
 # CONFIG_DEFXX_MMIO is not set
@@ -1444,7 +1297,6 @@
 CONFIG_HIPPI=y
 CONFIG_ROADRUNNER=m
 # CONFIG_ROADRUNNER_LARGE_RINGS is not set
-CONFIG_PLIP=m
 CONFIG_PPP=m
 CONFIG_PPP_MULTILINK=y
 CONFIG_PPP_FILTER=y
@@ -1462,219 +1314,53 @@
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_NET_FC=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
 # CONFIG_NETPOLL_TRAP is not set
 CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_ISDN=m
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-CONFIG_ISDN_PPP_BSDCOMP=m
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-CONFIG_ISDN_X25=y
-
-#
-# ISDN feature submodules
-#
-# CONFIG_ISDN_DRV_LOOP is not set
-CONFIG_ISDN_DIVERSION=m
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-# CONFIG_HISAX_NO_SENDCOMPLETE is not set
-# CONFIG_HISAX_NO_LLC is not set
-# CONFIG_HISAX_NO_KEYPAD is not set
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_TELESPCI=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NETJET=y
-CONFIG_HISAX_NETJET_U=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_HFC_PCI=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-CONFIG_HISAX_ENTERNOW_PCI=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-CONFIG_HISAX_SEDLBAUER_CS=m
-CONFIG_HISAX_ELSA_CS=m
-CONFIG_HISAX_AVM_A1_CS=m
-CONFIG_HISAX_TELES_CS=m
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-CONFIG_HISAX_HFC4S8S=m
-CONFIG_HISAX_FRITZ_PCIPNP=m
-CONFIG_HISAX_HDLC=y
-
-#
-# Active cards
-#
-# CONFIG_HYSDN is not set
-CONFIG_ISDN_DRV_GIGASET=m
-CONFIG_GIGASET_BASE=m
-CONFIG_GIGASET_M105=m
-# CONFIG_GIGASET_M101 is not set
-# CONFIG_GIGASET_DEBUG is not set
-# CONFIG_GIGASET_UNDOCREQ is not set
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
-CONFIG_PHONE=m
-CONFIG_PHONE_IXJ=m
-CONFIG_PHONE_IXJ_PCMCIA=m
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_JOYDEV=m
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_APPLETOUCH is not set
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_ANALOG=m
-CONFIG_JOYSTICK_A3D=m
-CONFIG_JOYSTICK_ADI=m
-CONFIG_JOYSTICK_COBRA=m
-CONFIG_JOYSTICK_GF2K=m
-CONFIG_JOYSTICK_GRIP=m
-CONFIG_JOYSTICK_GRIP_MP=m
-CONFIG_JOYSTICK_GUILLEMOT=m
-CONFIG_JOYSTICK_INTERACT=m
-CONFIG_JOYSTICK_SIDEWINDER=m
-CONFIG_JOYSTICK_TMDC=m
-CONFIG_JOYSTICK_IFORCE=m
-CONFIG_JOYSTICK_IFORCE_USB=y
-CONFIG_JOYSTICK_IFORCE_232=y
-CONFIG_JOYSTICK_WARRIOR=m
-CONFIG_JOYSTICK_MAGELLAN=m
-CONFIG_JOYSTICK_SPACEORB=m
-CONFIG_JOYSTICK_SPACEBALL=m
-CONFIG_JOYSTICK_STINGER=m
-CONFIG_JOYSTICK_TWIDJOY=m
-CONFIG_JOYSTICK_DB9=m
-CONFIG_JOYSTICK_GAMECON=m
-CONFIG_JOYSTICK_TURBOGRAFX=m
-CONFIG_JOYSTICK_JOYDUMP=m
-# CONFIG_JOYSTICK_XPAD is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-CONFIG_TOUCHSCREEN_GUNZE=m
-CONFIG_TOUCHSCREEN_ELO=m
-CONFIG_TOUCHSCREEN_MTOUCH=m
-CONFIG_TOUCHSCREEN_MK712=m
-CONFIG_TOUCHSCREEN_PENMOUNT=m
-CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
-CONFIG_TOUCHSCREEN_TOUCHWIN=m
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
@@ -1682,10 +1368,10 @@
 CONFIG_SERIO=y
 CONFIG_SERIO_I8042=y
 CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_PARKBD=m
 CONFIG_SERIO_PCIPS2=m
 CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
 CONFIG_GAMEPORT=m
 CONFIG_GAMEPORT_NS558=m
 CONFIG_GAMEPORT_L4=m
@@ -1696,30 +1382,13 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-CONFIG_ROCKETPORT=m
-CONFIG_CYCLADES=m
-# CONFIG_CYZ_INTR is not set
-CONFIG_DIGIEPCA=m
-# CONFIG_MOXA_INTELLIO is not set
-CONFIG_MOXA_SMARTIO=m
-# CONFIG_MOXA_SMARTIO_NEW is not set
-# CONFIG_ISI is not set
-CONFIG_SYNCLINKMP=m
-CONFIG_SYNCLINK_GT=m
-CONFIG_N_HDLC=m
-# CONFIG_RISCOM8 is not set
-CONFIG_SPECIALIX=m
-# CONFIG_SPECIALIX_RTSCTS is not set
-CONFIG_SX=m
-# CONFIG_RIO is not set
-CONFIG_STALDRV=y
-# CONFIG_STALLION is not set
-# CONFIG_ISTALLION is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -1741,161 +1410,128 @@
 #
 CONFIG_SERIAL_CORE=m
 CONFIG_SERIAL_JSM=m
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-CONFIG_PPDEV=m
-CONFIG_TIPAR=m
-CONFIG_IPMI_HANDLER=m
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_WDT_MTX1 is not set
-
-#
-# PCI-based Watchdog Cards
-#
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-CONFIG_WDT_501_PCI=y
-
-#
-# USB-based Watchdog Cards
-#
-CONFIG_USBPCWATCHDOG=m
+# CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-CONFIG_RTC=y
-CONFIG_R3964=m
-CONFIG_APPLICOM=m
-CONFIG_DRM=m
-CONFIG_DRM_TDFX=m
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-CONFIG_DRM_MGA=m
-CONFIG_DRM_VIA=m
-CONFIG_DRM_SAVAGE=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 
 #
 # PCMCIA character devices
 #
-CONFIG_SYNCLINK_CS=m
-CONFIG_CARDMAN_4000=m
-CONFIG_CARDMAN_4040=m
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_TCG_TPM=m
-CONFIG_TCG_ATMEL=m
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_ALGOPCA=m
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
-CONFIG_I2C_ALI1535=m
-CONFIG_I2C_ALI1563=m
-CONFIG_I2C_ALI15X3=m
-CONFIG_I2C_AMD756=m
-CONFIG_I2C_AMD756_S4882=m
-CONFIG_I2C_AMD8111=m
-CONFIG_I2C_I801=m
-CONFIG_I2C_I810=m
-CONFIG_I2C_PIIX4=m
-CONFIG_I2C_NFORCE2=m
-CONFIG_I2C_OCORES=m
-CONFIG_I2C_PARPORT=m
-CONFIG_I2C_PARPORT_LIGHT=m
-CONFIG_I2C_PROSAVAGE=m
-CONFIG_I2C_SAVAGE4=m
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
-CONFIG_I2C_SIS5595=m
-CONFIG_I2C_SIS630=m
-CONFIG_I2C_SIS96X=m
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-CONFIG_I2C_STUB=m
 # CONFIG_I2C_TINY_USB is not set
-CONFIG_I2C_VIA=m
-CONFIG_I2C_VIAPRO=m
-CONFIG_I2C_VOODOO3=m
 
 #
-# Miscellaneous I2C Chip support
+# Other I2C/SMBus bus drivers
 #
-CONFIG_SENSORS_DS1337=m
-CONFIG_SENSORS_DS1374=m
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_SENSORS_PCA9539=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_EEPROM_MAX6875=m
-# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
 
 #
-# SPI support
+# PPS support
 #
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
 
 #
-# SPI Master Controller Drivers
+# Memory mapped GPIO expanders:
 #
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_BUTTERFLY=m
-# CONFIG_SPI_LM70_LLP is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_SCH is not set
 
 #
-# SPI Protocol Masters
+# I2C GPIO expanders:
 #
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_W1=m
-CONFIG_W1_CON=y
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
-# 1-wire Bus Masters
+# PCI GPIO expanders:
 #
-CONFIG_W1_MASTER_MATROX=m
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_MASTER_DS2482=m
+# CONFIG_GPIO_CS5535 is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
-# 1-wire Slaves
+# SPI GPIO expanders:
 #
-CONFIG_W1_SLAVE_THERM=m
-CONFIG_W1_SLAVE_SMEM=m
-CONFIG_W1_SLAVE_DS2433=m
-# CONFIG_W1_SLAVE_DS2433_CRC is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 CONFIG_HWMON_VID=m
-CONFIG_SENSORS_ABITUGURU=m
-# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
@@ -1903,17 +1539,23 @@
 # CONFIG_SENSORS_ADM1029 is not set
 CONFIG_SENSORS_ADM1031=m
 CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_ASB100=m
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
 CONFIG_SENSORS_ATXP1=m
 CONFIG_SENSORS_DS1621=m
+# CONFIG_SENSORS_I5K_AMB is not set
 CONFIG_SENSORS_F71805F=m
-CONFIG_SENSORS_FSCHER=m
-CONFIG_SENSORS_FSCPOS=m
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 CONFIG_SENSORS_GL518SM=m
 CONFIG_SENSORS_GL520SM=m
 CONFIG_SENSORS_IT87=m
 CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM70=m
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM77=m
 CONFIG_SENSORS_LM78=m
@@ -1924,16 +1566,25 @@
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_LM92=m
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 CONFIG_SENSORS_MAX1619=m
 # CONFIG_SENSORS_MAX6650 is not set
 CONFIG_SENSORS_PC87360=m
 # CONFIG_SENSORS_PC87427 is not set
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_SENSORS_SHT15 is not set
 CONFIG_SENSORS_SIS5595=m
 # CONFIG_SENSORS_DME1737 is not set
 CONFIG_SENSORS_SMSC47M1=m
 CONFIG_SENSORS_SMSC47M192=m
 CONFIG_SENSORS_SMSC47B397=m
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 CONFIG_SENSORS_VIA686A=m
 CONFIG_SENSORS_VT1211=m
 CONFIG_SENSORS_VT8231=m
@@ -1942,370 +1593,94 @@
 CONFIG_SENSORS_W83792D=m
 # CONFIG_SENSORS_W83793 is not set
 CONFIG_SENSORS_W83L785TS=m
+# CONFIG_SENSORS_W83L786NG is not set
 CONFIG_SENSORS_W83627HF=m
 CONFIG_SENSORS_W83627EHF=m
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_TVAUDIO=m
-CONFIG_VIDEO_TDA7432=m
-CONFIG_VIDEO_TDA9840=m
-CONFIG_VIDEO_TDA9875=m
-CONFIG_VIDEO_TEA6415C=m
-CONFIG_VIDEO_TEA6420=m
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_BT819=m
-CONFIG_VIDEO_BT856=m
-CONFIG_VIDEO_KS0127=m
-CONFIG_VIDEO_SAA7110=m
-CONFIG_VIDEO_SAA7111=m
-CONFIG_VIDEO_SAA7114=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_TVP5150=m
-CONFIG_VIDEO_VPX3220=m
-CONFIG_VIDEO_CX25840=m
-CONFIG_VIDEO_CX2341X=m
-CONFIG_VIDEO_SAA7185=m
-CONFIG_VIDEO_ADV7170=m
-CONFIG_VIDEO_ADV7175=m
-CONFIG_VIDEO_VIVI=m
-CONFIG_VIDEO_BT848=m
-CONFIG_VIDEO_BT848_DVB=y
-CONFIG_VIDEO_SAA6588=m
-CONFIG_VIDEO_BWQCAM=m
-CONFIG_VIDEO_CQCAM=m
-CONFIG_VIDEO_W9966=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_PP=m
-CONFIG_VIDEO_CPIA_USB=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_VIDEO_SAA5246A=m
-CONFIG_VIDEO_SAA5249=m
-CONFIG_TUNER_3036=m
-# CONFIG_TUNER_TEA5761 is not set
-CONFIG_VIDEO_STRADIS=m
-CONFIG_VIDEO_ZORAN_ZR36060=m
-CONFIG_VIDEO_ZORAN=m
-CONFIG_VIDEO_ZORAN_BUZ=m
-CONFIG_VIDEO_ZORAN_DC10=m
-CONFIG_VIDEO_ZORAN_DC30=m
-CONFIG_VIDEO_ZORAN_LML33=m
-CONFIG_VIDEO_ZORAN_LML33R10=m
-CONFIG_VIDEO_ZORAN_AVS6EYES=m
-CONFIG_VIDEO_SAA7134=m
-CONFIG_VIDEO_SAA7134_ALSA=m
-CONFIG_VIDEO_SAA7134_OSS=m
-CONFIG_VIDEO_SAA7134_DVB=m
-CONFIG_VIDEO_MXB=m
-CONFIG_VIDEO_DPC=m
-CONFIG_VIDEO_HEXIUM_ORION=m
-CONFIG_VIDEO_HEXIUM_GEMINI=m
-CONFIG_VIDEO_CX88=m
-CONFIG_VIDEO_CX88_ALSA=m
-CONFIG_VIDEO_CX88_BLACKBIRD=m
-CONFIG_VIDEO_CX88_DVB=m
-CONFIG_VIDEO_CX88_VP3054=m
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_29XXX=y
-CONFIG_VIDEO_PVRUSB2_24XXX=y
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-CONFIG_VIDEO_EM28XX=m
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-CONFIG_USB_ET61X251=m
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-# CONFIG_USB_OV511 is not set
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_ZC0301=m
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-# CONFIG_USB_ZR364XX is not set
-CONFIG_RADIO_ADAPTERS=y
-CONFIG_RADIO_GEMTEK_PCI=m
-CONFIG_RADIO_MAXIRADIO=m
-CONFIG_RADIO_MAESTRO=m
-CONFIG_USB_DSBR=m
-CONFIG_DVB_CORE=m
-CONFIG_DVB_CORE_ATTACH=y
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-CONFIG_DVB_AV7110=m
-CONFIG_DVB_AV7110_OSD=y
-CONFIG_DVB_BUDGET=m
-CONFIG_DVB_BUDGET_CI=m
-CONFIG_DVB_BUDGET_AV=m
-CONFIG_DVB_BUDGET_PATCH=m
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-# CONFIG_DVB_USB_M920X is not set
-# CONFIG_DVB_USB_GL861 is not set
-# CONFIG_DVB_USB_AU6610 is not set
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-# CONFIG_DVB_USB_TTUSB2 is not set
-CONFIG_DVB_USB_DTT200U=m
-# CONFIG_DVB_USB_OPERA1 is not set
-# CONFIG_DVB_USB_AF9005 is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_CINERGYT2=m
-CONFIG_DVB_CINERGYT2_TUNING=y
-CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
-CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
-CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
-CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
-CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-CONFIG_DVB_B2C2_FLEXCOP=m
-CONFIG_DVB_B2C2_FLEXCOP_PCI=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-
-#
-# Supported BT878 Adapters
-#
-CONFIG_DVB_BT8XX=m
-
-#
-# Supported Pluto2 Adapters
-#
-CONFIG_DVB_PLUTO2=m
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_S5H1420=m
-CONFIG_DVB_TDA10086=m
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# DVB-T (terrestrial) frontends
+# Watchdog Device Drivers
 #
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_WDT_MTX1=y
 
 #
-# DVB-C (cable) frontends
+# PCI-based Watchdog Cards
 #
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+# USB-based Watchdog Cards
 #
-CONFIG_DVB_NXT200X=m
-CONFIG_DVB_OR51211=m
-CONFIG_DVB_OR51132=m
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Tuners/PLL support
+# Sonics Silicon Backplane
 #
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TDA827X=m
-# CONFIG_DVB_TUNER_QT1010 is not set
-CONFIG_DVB_TUNER_MT2060=m
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+# CONFIG_SSB_PCMCIAHOST is not set
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+# CONFIG_SSB_DRIVER_MIPS is not set
 
 #
-# Miscellaneous devices
+# Multifunction device drivers
 #
-CONFIG_DVB_LNBP21=m
-CONFIG_DVB_ISL6421=m
-CONFIG_DVB_TUA6100=m
-CONFIG_VIDEO_SAA7146=m
-CONFIG_VIDEO_SAA7146_VV=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_BUF=m
-CONFIG_VIDEO_BUF_DVB=m
-CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR_I2C=m
-CONFIG_VIDEO_IR=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_DAB=y
-CONFIG_USB_DABUSB=m
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-CONFIG_VGASTATE=m
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_DDC=m
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_BACKLIGHT=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-
-#
-# Frame buffer hardware drivers
-#
-CONFIG_FB_CIRRUS=m
-CONFIG_FB_PM2=m
-CONFIG_FB_PM2_FIFO_DISCONNECT=y
-CONFIG_FB_CYBER2000=m
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-CONFIG_FB_S1D13XXX=m
-CONFIG_FB_NVIDIA=m
-CONFIG_FB_NVIDIA_I2C=y
-# CONFIG_FB_NVIDIA_DEBUG is not set
-CONFIG_FB_NVIDIA_BACKLIGHT=y
-CONFIG_FB_RIVA=m
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
-CONFIG_FB_RIVA_BACKLIGHT=y
-CONFIG_FB_MATROX=m
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=m
-CONFIG_FB_MATROX_MAVEN=m
-CONFIG_FB_MATROX_MULTIHEAD=y
-CONFIG_FB_RADEON=m
-CONFIG_FB_RADEON_I2C=y
-CONFIG_FB_RADEON_BACKLIGHT=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=m
-CONFIG_FB_ATY128_BACKLIGHT=y
-CONFIG_FB_ATY=m
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-CONFIG_FB_ATY_GX=y
-CONFIG_FB_ATY_BACKLIGHT=y
-# CONFIG_FB_S3 is not set
-CONFIG_FB_SAVAGE=m
-CONFIG_FB_SAVAGE_I2C=y
-CONFIG_FB_SAVAGE_ACCEL=y
-CONFIG_FB_SIS=m
-CONFIG_FB_SIS_300=y
-CONFIG_FB_SIS_315=y
-CONFIG_FB_NEOMAGIC=m
-CONFIG_FB_KYRO=m
-CONFIG_FB_3DFX=m
-# CONFIG_FB_3DFX_ACCEL is not set
-CONFIG_FB_VOODOO1=m
-# CONFIG_FB_VT8623 is not set
-CONFIG_FB_TRIDENT=m
-# CONFIG_FB_TRIDENT_ACCEL is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+# CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -2318,32 +1693,29 @@
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_RTCTIMER=m
-CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
 CONFIG_SND_DYNAMIC_MINORS=y
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
+CONFIG_SND_RAWMIDI_SEQ=m
+CONFIG_SND_OPL3_LIB_SEQ=m
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_EMU10K1_SEQ=m
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_VX_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
-CONFIG_SND_MTS64=m
 CONFIG_SND_SERIAL_U16550=m
 CONFIG_SND_MPU401=m
-# CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 CONFIG_SND_AD1889=m
 CONFIG_SND_ALS300=m
 CONFIG_SND_ALI5451=m
@@ -2352,14 +1724,18 @@
 CONFIG_SND_AU8810=m
 CONFIG_SND_AU8820=m
 CONFIG_SND_AU8830=m
+# CONFIG_SND_AW2 is not set
 CONFIG_SND_AZT3328=m
 CONFIG_SND_BT87X=m
 # CONFIG_SND_BT87X_OVERCLOCK is not set
 CONFIG_SND_CA0106=m
 CONFIG_SND_CMIPCI=m
+# CONFIG_SND_OXYGEN is not set
 CONFIG_SND_CS4281=m
 CONFIG_SND_CS46XX=m
 CONFIG_SND_CS46XX_NEW_DSP=y
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
 CONFIG_SND_DARLA20=m
 CONFIG_SND_GINA20=m
 CONFIG_SND_LAYLA20=m
@@ -2372,6 +1748,8 @@
 CONFIG_SND_INDIGO=m
 CONFIG_SND_INDIGOIO=m
 CONFIG_SND_INDIGODJ=m
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 CONFIG_SND_EMU10K1=m
 CONFIG_SND_EMU10K1X=m
 CONFIG_SND_ENS1370=m
@@ -2379,19 +1757,36 @@
 CONFIG_SND_ES1938=m
 CONFIG_SND_ES1968=m
 CONFIG_SND_FM801=m
-CONFIG_SND_FM801_TEA575X_BOOL=y
-CONFIG_SND_FM801_TEA575X=m
 CONFIG_SND_HDA_INTEL=m
+# CONFIG_SND_HDA_HWDEP is not set
+# CONFIG_SND_HDA_INPUT_BEEP is not set
+# CONFIG_SND_HDA_INPUT_JACK is not set
+# CONFIG_SND_HDA_PATCH_LOADER is not set
+CONFIG_SND_HDA_CODEC_REALTEK=y
+CONFIG_SND_HDA_CODEC_ANALOG=y
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
+CONFIG_SND_HDA_CODEC_VIA=y
+CONFIG_SND_HDA_CODEC_ATIHDMI=y
+CONFIG_SND_HDA_CODEC_NVHDMI=y
+CONFIG_SND_HDA_CODEC_INTELHDMI=y
+CONFIG_SND_HDA_ELD=y
+CONFIG_SND_HDA_CODEC_CIRRUS=y
+CONFIG_SND_HDA_CODEC_CONEXANT=y
+CONFIG_SND_HDA_CODEC_CA0110=y
+CONFIG_SND_HDA_CODEC_CMEDIA=y
+CONFIG_SND_HDA_CODEC_SI3054=y
+CONFIG_SND_HDA_GENERIC=y
+# CONFIG_SND_HDA_POWER_SAVE is not set
 CONFIG_SND_HDSP=m
 CONFIG_SND_HDSPM=m
+# CONFIG_SND_HIFIER is not set
 CONFIG_SND_ICE1712=m
 CONFIG_SND_ICE1724=m
 CONFIG_SND_INTEL8X0=m
 CONFIG_SND_INTEL8X0M=m
 CONFIG_SND_KORG1212=m
-CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y
+# CONFIG_SND_LX6464ES is not set
 CONFIG_SND_MAESTRO3=m
-CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
 CONFIG_SND_MIXART=m
 CONFIG_SND_NM256=m
 CONFIG_SND_PCXHR=m
@@ -2403,55 +1798,30 @@
 CONFIG_SND_TRIDENT=m
 CONFIG_SND_VIA82XX=m
 CONFIG_SND_VIA82XX_MODEM=m
+# CONFIG_SND_VIRTUOSO is not set
 CONFIG_SND_VX222=m
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA MIPS devices
-#
+CONFIG_SND_MIPS=y
 # CONFIG_SND_AU1X00 is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 CONFIG_SND_VXPOCKET=m
 CONFIG_SND_PDAUDIOCF=m
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-CONFIG_SOUND_TRIDENT=m
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT_POWERBOOK=y
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 CONFIG_USB_HIDDEV=y
 
 #
@@ -2459,12 +1829,50 @@
 #
 CONFIG_USB_KBD=m
 CONFIG_USB_MOUSE=m
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MAGICMOUSE is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -2472,19 +1880,27 @@
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_PERSIST is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_HCD_SSB is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -2493,32 +1909,38 @@
 CONFIG_USB_SL811_HCD=m
 CONFIG_USB_SL811_CS=m
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+CONFIG_USB_STORAGE_KARMA=m
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -2526,25 +1948,20 @@
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-CONFIG_USB_USS720=m
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_AIRPRIME=m
 CONFIG_USB_SERIAL_ARK3116=m
 CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CP2101=m
+# CONFIG_USB_SERIAL_CP210X is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -2556,6 +1973,7 @@
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
 # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
@@ -2575,20 +1993,27 @@
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_MOS7720=m
 CONFIG_USB_SERIAL_MOS7840=m
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 CONFIG_USB_SERIAL_NAVMAN=m
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
 # CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
 CONFIG_USB_SERIAL_TI=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OPTION=m
 CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
 
 #
 # USB Miscellaneous drivers
@@ -2596,18 +2021,13 @@
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
-CONFIG_USB_AUERSWALD=m
+# CONFIG_USB_SEVSEG is not set
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
 CONFIG_USB_LED=m
 CONFIG_USB_CYPRESS_CY7C63=m
 CONFIG_USB_CYTHERM=m
-CONFIG_USB_PHIDGET=m
-CONFIG_USB_PHIDGETKIT=m
-CONFIG_USB_PHIDGETMOTORCONTROL=m
-CONFIG_USB_PHIDGETSERVO=m
 CONFIG_USB_IDMOUSE=m
 CONFIG_USB_FTDI_ELAN=m
 CONFIG_USB_APPLEDISPLAY=m
@@ -2617,86 +2037,113 @@
 CONFIG_USB_TRANCEVIBRATOR=m
 # CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
-
-#
-# USB DSL modem support
-#
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
 CONFIG_USB_CXACRU=m
 CONFIG_USB_UEAGLEATM=m
 CONFIG_USB_XUSBATM=m
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=m
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_NET2280=m
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+CONFIG_USB_GADGET_NET2280=y
+CONFIG_USB_NET2280=m
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_MIDI_GADGET=m
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
 CONFIG_MMC=m
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PCI is not set
+# CONFIG_MMC_SDHCI_PLTFM is not set
 CONFIG_MMC_TIFM_SD=m
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_CLASS=y
 
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-CONFIG_INFINIBAND_AMSO1100=m
-CONFIG_INFINIBAND_AMSO1100_DEBUG=y
-# CONFIG_MLX4_INFINIBAND is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-CONFIG_INFINIBAND_ISER=m
-CONFIG_RTC_LIB=m
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
 
 #
@@ -2712,6 +2159,7 @@
 # I2C RTC drivers
 #
 CONFIG_RTC_DRV_DS1307=m
+# CONFIG_RTC_DRV_DS1374 is not set
 CONFIG_RTC_DRV_DS1672=m
 # CONFIG_RTC_DRV_MAX6900 is not set
 CONFIG_RTC_DRV_RS5C372=m
@@ -2720,48 +2168,45 @@
 CONFIG_RTC_DRV_PCF8563=m
 CONFIG_RTC_DRV_PCF8583=m
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
 #
-CONFIG_RTC_DRV_RS5C348=m
-CONFIG_RTC_DRV_MAX6902=m
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 CONFIG_RTC_DRV_DS1553=m
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_DS1742=m
+# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=m
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 CONFIG_RTC_DRV_V3020=m
 
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-CONFIG_NET_DMA=y
-
-#
-# DMA Devices
-#
-CONFIG_INTEL_IOATDMA=m
+# CONFIG_RTC_DRV_AU1XXX is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# Userspace I/O
+# TI VLYNQ
 #
-# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -2772,44 +2217,43 @@
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-CONFIG_JFS_STATISTICS=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
+# CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QUOTA_DEBUG is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -2838,73 +2282,79 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_ECRYPT_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_RPCSEC_GSS_SPKM3=m
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
 # CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
 # CONFIG_CIFS_XATTR is not set
 # CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 CONFIG_NCP_FS=m
 CONFIG_NCPFS_PACKET_SIGNING=y
@@ -2916,7 +2366,6 @@
 CONFIG_NCPFS_NLS=y
 CONFIG_NCPFS_EXTRAS=y
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 CONFIG_AFS_FS=m
 # CONFIG_AFS_DEBUG is not set
 
@@ -2948,10 +2397,6 @@
 CONFIG_KARMA_PARTITION=y
 CONFIG_EFI_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=m
@@ -2992,118 +2437,179 @@
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_LKDTM is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 # CONFIG_CMDLINE_BOOL is not set
+# CONFIG_SPINLOCK_TEST is not set
 
 #
 # Security options
 #
 CONFIG_KEYS=y
 # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=m
-CONFIG_SECURITY_ROOTPLUG=m
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_SECURITY_SELINUX_DEVELOP=y
-CONFIG_SECURITY_SELINUX_AVC_STATS=y
-CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
-# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_REED_SOLOMON=m
-CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_CHECK_SIGNATURE=y
+CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/mips/configs/rb532_defconfig linux-libre-2.6.35-gnu/arch/mips/configs/rb532_defconfig
--- linux-libre-2.6.34-gnu/arch/mips/configs/rb532_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/configs/rb532_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Mon Apr 28 12:24:17 2008
+# Linux kernel version: 2.6.34-rc6
+# Sat May  1 11:49:51 2010
 #
 CONFIG_MIPS=y
 
@@ -9,22 +9,25 @@
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_NEC_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP28 is not set
@@ -38,11 +41,14 @@
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
 CONFIG_MIKROTIK_RB532=y
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
 # CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -53,14 +59,15 @@
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_BOOT_RAW=y
+CONFIG_CEVT_R4K_LIB=y
 CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_HOTPLUG_CPU is not set
+CONFIG_NEED_DMA_MAP_STATE=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -73,7 +80,8 @@
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -86,6 +94,7 @@
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_R5000 is not set
 # CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
 # CONFIG_CPU_R6000 is not set
 # CONFIG_CPU_NEVADA is not set
 # CONFIG_CPU_R8000 is not set
@@ -93,11 +102,13 @@
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
 
 #
 # Kernel type
@@ -107,11 +118,13 @@
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -124,12 +137,13 @@
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -151,6 +165,7 @@
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -168,23 +183,31 @@
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
@@ -192,54 +215,87 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_PCI_QUIRKS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-CONFIG_PROC_PAGE_MONITOR=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -248,7 +304,8 @@
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -257,25 +314,22 @@
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_TRAD_SIGNALS=y
 
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -325,7 +379,6 @@
 # CONFIG_DEFAULT_RENO is not set
 CONFIG_DEFAULT_TCP_CONG="vegas"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -336,8 +389,9 @@
 #
 # Core Netfilter Configuration
 #
+CONFIG_NETFILTER_NETLINK=m
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=y
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
@@ -355,18 +409,23 @@
 # CONFIG_NF_CONNTRACK_SIP is not set
 CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=y
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
 # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -375,18 +434,21 @@
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 # CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 CONFIG_NETFILTER_XT_MATCH_LIMIT=y
 # CONFIG_NETFILTER_XT_MATCH_MAC is not set
 # CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=y
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
@@ -394,20 +456,21 @@
 # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
 # CONFIG_NETFILTER_XT_MATCH_TIME is not set
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=y
 CONFIG_NF_CONNTRACK_IPV4=y
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=y
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 # CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
 # CONFIG_IP_NF_MATCH_TTL is not set
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
 # CONFIG_IP_NF_TARGET_LOG is not set
@@ -415,8 +478,8 @@
 CONFIG_NF_NAT=y
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=y
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
 # CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
 # CONFIG_NF_NAT_SNMP_BASIC is not set
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
@@ -426,17 +489,22 @@
 # CONFIG_NF_NAT_H323 is not set
 # CONFIG_NF_NAT_SIP is not set
 CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
 # CONFIG_IP_NF_TARGET_ECN is not set
 # CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
 CONFIG_IP_NF_RAW=m
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=y
 CONFIG_BRIDGE=y
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=y
 CONFIG_LLC2=m
@@ -446,6 +514,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -455,7 +525,7 @@
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -463,6 +533,7 @@
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 # CONFIG_NET_SCH_INGRESS is not set
 
 #
@@ -496,8 +567,10 @@
 # CONFIG_NET_ACT_NAT is not set
 CONFIG_NET_ACT_PEDIT=m
 # CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -514,14 +587,19 @@
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_PRIV=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -533,13 +611,17 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -612,6 +694,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -623,23 +710,36 @@
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -656,10 +756,6 @@
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -676,27 +772,35 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -708,9 +812,15 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_VERBOSE_ERROR is not set
 # CONFIG_SATA_PMP is not set
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -732,6 +842,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -747,6 +858,7 @@
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
@@ -757,29 +869,39 @@
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 CONFIG_PATA_RB532=y
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_IFB=m
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -797,21 +919,28 @@
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_TC35815 is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -821,30 +950,27 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_VIA_RHINE=y
 # CONFIG_VIA_RHINE_MMIO is not set
-CONFIG_VIA_RHINE_NAPI=y
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_HERMES is not set
+CONFIG_WLAN=y
 CONFIG_ATMEL=m
 # CONFIG_PCI_ATMEL is not set
 # CONFIG_PRISM54 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -864,6 +990,7 @@
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -872,7 +999,8 @@
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -887,17 +1015,29 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_RB532_BUTTON=y
 
 #
 # Hardware I/O ports
@@ -909,6 +1049,7 @@
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -928,105 +1069,95 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_RTC is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
 
 #
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# Sonics Silicon Backplane
+# PPS support
 #
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
 
 #
-# Multifunction device drivers
+# Memory mapped GPIO expanders:
 #
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_SCH is not set
 
 #
-# Multimedia devices
+# I2C GPIO expanders:
 #
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
 
 #
-# Encoders/decoders and other helper chips
+# PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
-# Audio decoders
+# SPI GPIO expanders:
 #
 
 #
-# Video decoders
+# AC97 GPIO expanders:
 #
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# Video and audio decoders
+# Watchdog Device Drivers
 #
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_RC32434_WDT=y
 
 #
-# MPEG video encoders
+# PCI-based Watchdog Cards
 #
-# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Video encoders
+# Sonics Silicon Backplane
 #
+# CONFIG_SSB is not set
 
 #
-# Video improvement chips
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1037,13 +1168,10 @@
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 # CONFIG_HID is not set
+# CONFIG_HID_PID is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1053,9 +1181,18 @@
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1064,41 +1201,67 @@
 #
 # LED drivers
 #
+CONFIG_LEDS_MIKROTIK_RB532=y
 # CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
 #
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -1117,15 +1280,13 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1148,9 +1309,14 @@
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
 # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1160,6 +1326,7 @@
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1198,11 +1365,22 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -1210,18 +1388,32 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_MANAGER is not set
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 CONFIG_CRYPTO_TEST=m
@@ -1249,14 +1441,20 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1266,7 +1464,7 @@
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -1286,27 +1484,36 @@
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_ZLIB=y
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/atomic.h linux-libre-2.6.35-gnu/arch/mips/include/asm/atomic.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/atomic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/atomic.h	2010-08-01 18:11:14.000000000 -0400
@@ -29,7 +29,7 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v)		((v)->counter)
+#define atomic_read(v)		(*(volatile int *)&(v)->counter)
 
 /*
  * atomic_set - set atomic variable
@@ -410,7 +410,7 @@
  * @v: pointer of type atomic64_t
  *
  */
-#define atomic64_read(v)	((v)->counter)
+#define atomic64_read(v)	(*(volatile long *)&(v)->counter)
 
 /*
  * atomic64_set - set atomic variable
@@ -434,7 +434,7 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
-		"	addu	%0, %2					\n"
+		"	daddu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqzl	%0, 1b					\n"
 		"	.set	mips0					\n"
@@ -446,7 +446,7 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
-		"	addu	%0, %2					\n"
+		"	daddu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqz	%0, 2f					\n"
 		"	.subsection 2					\n"
@@ -479,7 +479,7 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
-		"	subu	%0, %2					\n"
+		"	dsubu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqzl	%0, 1b					\n"
 		"	.set	mips0					\n"
@@ -491,7 +491,7 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
-		"	subu	%0, %2					\n"
+		"	dsubu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqz	%0, 2f					\n"
 		"	.subsection 2					\n"
@@ -524,10 +524,10 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqzl	%0, 1b					\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
@@ -538,10 +538,10 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqz	%0, 2f					\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	.subsection 2					\n"
 		"2:	b	1b					\n"
 		"	.previous					\n"
@@ -576,10 +576,10 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqzl	%0, 1b					\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
@@ -590,10 +590,10 @@
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqz	%0, 2f					\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	.subsection 2					\n"
 		"2:	b	1b					\n"
 		"	.previous					\n"
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/i8253.h linux-libre-2.6.35-gnu/arch/mips/include/asm/i8253.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/i8253.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/i8253.h	2010-08-01 18:11:14.000000000 -0400
@@ -12,7 +12,7 @@
 #define PIT_CH0			0x40
 #define PIT_CH2			0x42
 
-extern spinlock_t i8253_lock;
+extern raw_spinlock_t i8253_lock;
 
 extern void setup_pit_timer(void);
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/kgdb.h linux-libre-2.6.35-gnu/arch/mips/include/asm/kgdb.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/kgdb.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/kgdb.h	2010-08-01 18:11:14.000000000 -0400
@@ -38,6 +38,8 @@
 extern void *saved_vectors[32];
 extern void handle_exception(struct pt_regs *regs);
 extern void breakinst(void);
+extern int kgdb_ll_trap(int cmd, const char *str,
+			struct pt_regs *regs, long err, int trap, int sig);
 
 #endif				/* __KERNEL__ */
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-ar7/ar7.h linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-ar7/ar7.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-ar7/ar7.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-ar7/ar7.h	2010-08-01 18:11:14.000000000 -0400
@@ -50,7 +50,7 @@
 #define UR8_REGS_WDT	(AR7_REGS_BASE + 0x0b00)
 #define UR8_REGS_UART1	(AR7_REGS_BASE + 0x0f00)
 
-#define AR7_RESET_PEREPHERIAL	0x0
+#define AR7_RESET_PERIPHERAL	0x0
 #define AR7_RESET_SOFTWARE	0x4
 #define AR7_RESET_STATUS	0x8
 
@@ -128,7 +128,7 @@
 static inline void ar7_device_enable(u32 bit)
 {
 	void *reset_reg =
-		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL);
 	writel(readl(reset_reg) | (1 << bit), reset_reg);
 	msleep(20);
 }
@@ -136,7 +136,7 @@
 static inline void ar7_device_disable(u32 bit)
 {
 	void *reset_reg =
-		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
+		(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL);
 	writel(readl(reset_reg) & ~(1 << bit), reset_reg);
 	msleep(20);
 }
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-ar7/gpio.h linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-ar7/gpio.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-ar7/gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-ar7/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -24,7 +24,7 @@
 #define AR7_GPIO_MAX 32
 #define NR_BUILTIN_GPIO AR7_GPIO_MAX
 
-#define gpio_to_irq(gpio)	NULL
+#define gpio_to_irq(gpio)	-1
 
 #define gpio_get_value __gpio_get_value
 #define gpio_set_value __gpio_set_value
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-au1x00/au1000.h linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-au1x00/au1000.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-au1x00/au1000.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-au1x00/au1000.h	2010-08-01 18:11:14.000000000 -0400
@@ -188,10 +188,9 @@
 extern unsigned long au1xxx_calc_clock(void);
 
 /* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
-void au1xxx_save_and_sleep(void);
+void alchemy_sleep_au1000(void);
+void alchemy_sleep_au1550(void);
 void au_sleep(void);
-void save_au1xxx_intctl(void);
-void restore_au1xxx_intctl(void);
 
 
 /* SOC Interrupt numbers */
@@ -835,6 +834,38 @@
 #define MEM_STNAND_DATA 	0x20
 #endif
 
+
+/* Interrupt Controller register offsets */
+#define IC_CFG0RD		0x40
+#define IC_CFG0SET		0x40
+#define IC_CFG0CLR		0x44
+#define IC_CFG1RD		0x48
+#define IC_CFG1SET		0x48
+#define IC_CFG1CLR		0x4C
+#define IC_CFG2RD		0x50
+#define IC_CFG2SET		0x50
+#define IC_CFG2CLR		0x54
+#define IC_REQ0INT		0x54
+#define IC_SRCRD		0x58
+#define IC_SRCSET		0x58
+#define IC_SRCCLR		0x5C
+#define IC_REQ1INT		0x5C
+#define IC_ASSIGNRD		0x60
+#define IC_ASSIGNSET		0x60
+#define IC_ASSIGNCLR		0x64
+#define IC_WAKERD		0x68
+#define IC_WAKESET		0x68
+#define IC_WAKECLR		0x6C
+#define IC_MASKRD		0x70
+#define IC_MASKSET		0x70
+#define IC_MASKCLR		0x74
+#define IC_RISINGRD		0x78
+#define IC_RISINGCLR		0x78
+#define IC_FALLINGRD		0x7C
+#define IC_FALLINGCLR		0x7C
+#define IC_TESTBIT		0x80
+
+
 /* Interrupt Controller 0 */
 #define IC0_CFG0RD		0xB0400040
 #define IC0_CFG0SET		0xB0400040
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h	2010-08-01 18:11:14.000000000 -0400
@@ -358,10 +358,6 @@
 u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
 extern void au1xxx_ddma_del_device(u32 devid);
 void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
-#ifdef CONFIG_PM
-void au1xxx_dbdma_suspend(void);
-void au1xxx_dbdma_resume(void);
-#endif
 
 /*
  *	Flags for the put_source/put_dest functions.
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-bcm47xx/nvram.h linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-bcm47xx/nvram.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-bcm47xx/nvram.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-bcm47xx/nvram.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,36 @@
+/*
+ *  Copyright (C) 2005, Broadcom Corporation
+ *  Copyright (C) 2006, Felix Fietkau <nbd@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __NVRAM_H
+#define __NVRAM_H
+
+#include <linux/types.h>
+
+struct nvram_header {
+	u32 magic;
+	u32 len;
+	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
+	u32 config_ncdl;	/* ncdl values for memc */
+};
+
+#define NVRAM_HEADER		0x48534C46	/* 'FLSH' */
+#define NVRAM_VERSION		1
+#define NVRAM_HEADER_SIZE	20
+#define NVRAM_SPACE		0x8000
+
+#define FLASH_MIN		0x00020000	/* Minimum flash size */
+
+#define NVRAM_MAX_VALUE_LEN 255
+#define NVRAM_MAX_PARAM_LEN 64
+
+extern int nvram_getenv(char *name, char *val, size_t val_len);
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -20,7 +20,7 @@
 	}
 }
 
-#define GPIO_DIR_OUT	0x0
-#define GPIO_DIR_IN	0x1
+#define BCM63XX_GPIO_DIR_OUT	0x0
+#define BCM63XX_GPIO_DIR_IN	0x1
 
 #endif /* !BCM63XX_GPIO_H */
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-bcm63xx/gpio.h linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-bcm63xx/gpio.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-bcm63xx/gpio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-bcm63xx/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -3,7 +3,7 @@
 
 #include <bcm63xx_gpio.h>
 
-#define gpio_to_irq(gpio)	NULL
+#define gpio_to_irq(gpio)	-1
 
 #define gpio_get_value __gpio_get_value
 #define gpio_set_value __gpio_set_value
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h	2010-08-01 18:11:14.000000000 -0400
@@ -52,6 +52,8 @@
 #define cpu_has_tx39_cache	0
 #define cpu_has_userlocal	0
 #define cpu_has_vce		0
+#define cpu_has_veic		0
+#define cpu_has_vint		0
 #define cpu_has_vtag_icache	0
 #define cpu_has_watch		1
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-loongson/gpio.h linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-loongson/gpio.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/mach-loongson/gpio.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/mach-loongson/gpio.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,35 @@
+/*
+ * STLS2F GPIO Support
+ *
+ * Copyright (c) 2008  Richard Liu, STMicroelectronics <richard.liu@st.com>
+ * Copyright (c) 2008-2010  Arnaud Patard <apatard@mandriva.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__STLS2F_GPIO_H
+#define	__STLS2F_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+extern void gpio_set_value(unsigned gpio, int value);
+extern int gpio_get_value(unsigned gpio);
+extern int gpio_cansleep(unsigned gpio);
+
+/* The chip can do interrupt
+ * but it has not been tested and doc not clear
+ */
+static inline int gpio_to_irq(int gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(int gpio)
+{
+	return -EINVAL;
+}
+
+#endif				/* __STLS2F_GPIO_H */
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/processor.h linux-libre-2.6.35-gnu/arch/mips/include/asm/processor.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/processor.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/processor.h	2010-08-01 18:11:14.000000000 -0400
@@ -344,16 +344,10 @@
 #ifdef CONFIG_CPU_HAS_PREFETCH
 
 #define ARCH_HAS_PREFETCH
+#define prefetch(x) __builtin_prefetch((x), 0, 1)
 
-static inline void prefetch(const void *addr)
-{
-	__asm__ __volatile__(
-	"	.set	mips4		\n"
-	"	pref	%0, (%1)	\n"
-	"	.set	mips0		\n"
-	:
-	: "i" (Pref_Load), "r" (addr));
-}
+#define ARCH_HAS_PREFETCHW
+#define prefetchw(x) __builtin_prefetch((x), 1, 1)
 
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/mips/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,27 +1,7 @@
 #ifndef __ASM_SCATTERLIST_H
 #define __ASM_SCATTERLIST_H
 
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-	dma_addr_t	dma_address;
-	unsigned int	length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (0x00ffffffUL)
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/mips/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -112,7 +112,7 @@
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		18
+#define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_FREEZE		19
 #define TIF_FIXADE		20	/* Fix address errors in software */
 #define TIF_LOGADE		21	/* Log address errors to syslog */
diff -druN linux-libre-2.6.34-gnu/arch/mips/include/asm/unistd.h linux-libre-2.6.35-gnu/arch/mips/include/asm/unistd.h
--- linux-libre-2.6.34-gnu/arch/mips/include/asm/unistd.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/include/asm/unistd.h	2010-08-01 18:11:14.000000000 -0400
@@ -984,16 +984,17 @@
 #define __NR_perf_event_open		(__NR_Linux + 296)
 #define __NR_accept4			(__NR_Linux + 297)
 #define __NR_recvmmsg			(__NR_Linux + 298)
+#define __NR_getdents64			(__NR_Linux + 299)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		298
+#define __NR_Linux_syscalls		299
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		298
+#define __NR_N32_Linux_syscalls		299
 
 #ifdef __KERNEL__
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/Kconfig linux-libre-2.6.35-gnu/arch/mips/Kconfig
--- linux-libre-2.6.34-gnu/arch/mips/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1075,6 +1075,8 @@
 	bool "Loongson 2F"
 	depends on SYS_HAS_CPU_LOONGSON2F
 	select CPU_LOONGSON2
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  The Loongson 2F processor implements the MIPS III instruction set
 	  with many extensions.
diff -druN linux-libre-2.6.34-gnu/arch/mips/kernel/cpufreq/loongson2_cpufreq.c linux-libre-2.6.35-gnu/arch/mips/kernel/cpufreq/loongson2_cpufreq.c
--- linux-libre-2.6.34-gnu/arch/mips/kernel/cpufreq/loongson2_cpufreq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/kernel/cpufreq/loongson2_cpufreq.c	2010-08-01 18:11:14.000000000 -0400
@@ -65,7 +65,7 @@
 		return -ENODEV;
 
 	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	if (cpufreq_frequency_table_target
 	    (policy, &loongson2_clockmod_table[0], target_freq, relation,
@@ -91,7 +91,7 @@
 	/* notifiers */
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 
 	/* setting the cpu frequency */
 	clk_set_rate(cpuclk, freq);
diff -druN linux-libre-2.6.34-gnu/arch/mips/kernel/cpu-probe.c linux-libre-2.6.35-gnu/arch/mips/kernel/cpu-probe.c
--- linux-libre-2.6.34-gnu/arch/mips/kernel/cpu-probe.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/kernel/cpu-probe.c	2010-08-01 18:11:14.000000000 -0400
@@ -125,6 +125,30 @@
 
 __setup("nowait", wait_disable);
 
+static int __cpuinitdata mips_fpu_disabled;
+
+static int __init fpu_disable(char *s)
+{
+	cpu_data[0].options &= ~MIPS_CPU_FPU;
+	mips_fpu_disabled = 1;
+
+	return 1;
+}
+
+__setup("nofpu", fpu_disable);
+
+int __cpuinitdata mips_dsp_disabled;
+
+static int __init dsp_disable(char *s)
+{
+	cpu_data[0].ases &= ~MIPS_ASE_DSP;
+	mips_dsp_disabled = 1;
+
+	return 1;
+}
+
+__setup("nodsp", dsp_disable);
+
 void __init check_wait(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -982,6 +1006,12 @@
 	 */
 	BUG_ON(current_cpu_type() != c->cputype);
 
+	if (mips_fpu_disabled)
+		c->options &= ~MIPS_CPU_FPU;
+
+	if (mips_dsp_disabled)
+		c->ases &= ~MIPS_ASE_DSP;
+
 	if (c->options & MIPS_CPU_FPU) {
 		c->fpu_id = cpu_get_fpu_id();
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/kernel/ftrace.c linux-libre-2.6.35-gnu/arch/mips/kernel/ftrace.c
--- linux-libre-2.6.34-gnu/arch/mips/kernel/ftrace.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/kernel/ftrace.c	2010-08-01 18:11:14.000000000 -0400
@@ -2,7 +2,7 @@
  * Code for replacing ftrace calls with jumps.
  *
  * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
- * Copyright (C) 2009 DSLab, Lanzhou University, China
+ * Copyright (C) 2009, 2010 DSLab, Lanzhou University, China
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * Thanks goes to Steven Rostedt for writing the original x86 version.
@@ -12,18 +12,62 @@
 #include <linux/init.h>
 #include <linux/ftrace.h>
 
-#include <asm/cacheflush.h>
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/cacheflush.h>
+#include <asm/uasm.h>
+
+/*
+ * If the Instruction Pointer is in module space (0xc0000000), return true;
+ * otherwise, it is in kernel space (0x80000000), return false.
+ *
+ * FIXME: This will not work when the kernel space and module space are the
+ * same. If they are the same, we need to modify scripts/recordmcount.pl,
+ * ftrace_make_nop/call() and the other related parts to ensure the
+ * enabling/disabling of the calling site to _mcount is right for both kernel
+ * and module.
+ */
+
+static inline int in_module(unsigned long ip)
+{
+	return ip & 0x40000000;
+}
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 #define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
 #define ADDR_MASK 0x03ffffff	/*  op_code|addr : 31...26|25 ....0 */
-#define jump_insn_encode(op_code, addr) \
-	((unsigned int)((op_code) | (((addr) >> 2) & ADDR_MASK)))
 
-static unsigned int ftrace_nop = 0x00000000;
+#define INSN_B_1F_4 0x10000004	/* b 1f; offset = 4 */
+#define INSN_B_1F_5 0x10000005	/* b 1f; offset = 5 */
+#define INSN_NOP 0x00000000	/* nop */
+#define INSN_JAL(addr)	\
+	((unsigned int)(JAL | (((addr) >> 2) & ADDR_MASK)))
+
+static unsigned int insn_jal_ftrace_caller __read_mostly;
+static unsigned int insn_lui_v1_hi16_mcount __read_mostly;
+static unsigned int insn_j_ftrace_graph_caller __maybe_unused __read_mostly;
+
+static inline void ftrace_dyn_arch_init_insns(void)
+{
+	u32 *buf;
+	unsigned int v1;
+
+	/* lui v1, hi16_mcount */
+	v1 = 3;
+	buf = (u32 *)&insn_lui_v1_hi16_mcount;
+	UASM_i_LA_mostly(&buf, v1, MCOUNT_ADDR);
+
+	/* jal (ftrace_caller + 8), jump over the first two instruction */
+	buf = (u32 *)&insn_jal_ftrace_caller;
+	uasm_i_jal(&buf, (FTRACE_ADDR + 8));
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	/* j ftrace_graph_caller */
+	buf = (u32 *)&insn_j_ftrace_graph_caller;
+	uasm_i_j(&buf, (unsigned long)ftrace_graph_caller);
+#endif
+}
 
 static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
 {
@@ -40,67 +84,56 @@
 	return 0;
 }
 
-static int lui_v1;
-static int jal_mcount;
-
 int ftrace_make_nop(struct module *mod,
 		    struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned int new;
-	int faulted;
 	unsigned long ip = rec->ip;
 
-	/* We have compiled module with -mlong-calls, but compiled the kernel
-	 * without it, we need to cope with them respectively. */
-	if (ip & 0x40000000) {
-		/* record it for ftrace_make_call */
-		if (lui_v1 == 0) {
-			/* lui_v1 = *(unsigned int *)ip; */
-			safe_load_code(lui_v1, ip, faulted);
-
-			if (unlikely(faulted))
-				return -EFAULT;
-		}
-
-		/* lui v1, hi_16bit_of_mcount        --> b 1f (0x10000004)
+	/*
+	 * We have compiled module with -mlong-calls, but compiled the kernel
+	 * without it, we need to cope with them respectively.
+	 */
+	if (in_module(ip)) {
+#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT)
+		/*
+		 * lui v1, hi_16bit_of_mcount        --> b 1f (0x10000005)
 		 * addiu v1, v1, low_16bit_of_mcount
 		 * move at, ra
+		 * move $12, ra_address
 		 * jalr v1
-		 * nop
-		 * 				     1f: (ip + 12)
+		 *  sub sp, sp, 8
+		 *                                  1: offset = 5 instructions
 		 */
-		new = 0x10000004;
+		new = INSN_B_1F_5;
+#else
+		/*
+		 * lui v1, hi_16bit_of_mcount        --> b 1f (0x10000004)
+		 * addiu v1, v1, low_16bit_of_mcount
+		 * move at, ra
+		 * jalr v1
+		 *  nop | move $12, ra_address | sub sp, sp, 8
+		 *                                  1: offset = 4 instructions
+		 */
+		new = INSN_B_1F_4;
+#endif
 	} else {
-		/* record/calculate it for ftrace_make_call */
-		if (jal_mcount == 0) {
-			/* We can record it directly like this:
-			 *     jal_mcount = *(unsigned int *)ip;
-			 * Herein, jump over the first two nop instructions */
-			jal_mcount = jump_insn_encode(JAL, (MCOUNT_ADDR + 8));
-		}
-
-		/* move at, ra
-		 * jalr v1		--> nop
+		/*
+		 * move at, ra
+		 * jal _mcount		--> nop
 		 */
-		new = ftrace_nop;
+		new = INSN_NOP;
 	}
 	return ftrace_modify_code(ip, new);
 }
 
-static int modified;	/* initialized as 0 by default */
-
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned int new;
 	unsigned long ip = rec->ip;
 
-	/* We just need to remove the "b ftrace_stub" at the fist time! */
-	if (modified == 0) {
-		modified = 1;
-		ftrace_modify_code(addr, ftrace_nop);
-	}
 	/* ip, module: 0xc0000000, kernel: 0x80000000 */
-	new = (ip & 0x40000000) ? lui_v1 : jal_mcount;
+	new = in_module(ip) ? insn_lui_v1_hi16_mcount : insn_jal_ftrace_caller;
 
 	return ftrace_modify_code(ip, new);
 }
@@ -111,44 +144,48 @@
 {
 	unsigned int new;
 
-	new = jump_insn_encode(JAL, (unsigned long)func);
+	new = INSN_JAL((unsigned long)func);
 
 	return ftrace_modify_code(FTRACE_CALL_IP, new);
 }
 
 int __init ftrace_dyn_arch_init(void *data)
 {
+	/* Encode the instructions when booting */
+	ftrace_dyn_arch_init_insns();
+
+	/* Remove "b ftrace_stub" to ensure ftrace_caller() is executed */
+	ftrace_modify_code(MCOUNT_ADDR, INSN_NOP);
+
 	/* The return code is retured via data */
 	*(unsigned long *)data = 0;
 
 	return 0;
 }
-#endif				/* CONFIG_DYNAMIC_FTRACE */
+#endif	/* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 extern void ftrace_graph_call(void);
-#define JMP	0x08000000	/* jump to target directly */
-#define CALL_FTRACE_GRAPH_CALLER \
-	jump_insn_encode(JMP, (unsigned long)(&ftrace_graph_caller))
 #define FTRACE_GRAPH_CALL_IP	((unsigned long)(&ftrace_graph_call))
 
 int ftrace_enable_ftrace_graph_caller(void)
 {
 	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP,
-				  CALL_FTRACE_GRAPH_CALLER);
+			insn_j_ftrace_graph_caller);
 }
 
 int ftrace_disable_ftrace_graph_caller(void)
 {
-	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, ftrace_nop);
+	return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, INSN_NOP);
 }
 
-#endif				/* !CONFIG_DYNAMIC_FTRACE */
+#endif	/* CONFIG_DYNAMIC_FTRACE */
 
 #ifndef KBUILD_MCOUNT_RA_ADDRESS
+
 #define S_RA_SP	(0xafbf << 16)	/* s{d,w} ra, offset(sp) */
 #define S_R_SP	(0xafb0 << 16)  /* s{d,w} R, offset(sp) */
 #define OFFSET_MASK	0xffff	/* stack offset range: 0 ~ PT_SIZE */
@@ -162,17 +199,17 @@
 	unsigned int code;
 	int faulted;
 
-	/* in module or kernel? */
-	if (self_addr & 0x40000000) {
-		/* module: move to the instruction "lui v1, HI_16BIT_OF_MCOUNT" */
-		ip = self_addr - 20;
-	} else {
-		/* kernel: move to the instruction "move ra, at" */
-		ip = self_addr - 12;
-	}
+	/*
+	 * For module, move the ip from calling site of mcount to the
+	 * instruction "lui v1, hi_16bit_of_mcount"(offset is 20), but for
+	 * kernel, move to the instruction "move ra, at"(offset is 12)
+	 */
+	ip = self_addr - (in_module(self_addr) ? 20 : 12);
 
-	/* search the text until finding the non-store instruction or "s{d,w}
-	 * ra, offset(sp)" instruction */
+	/*
+	 * search the text until finding the non-store instruction or "s{d,w}
+	 * ra, offset(sp)" instruction
+	 */
 	do {
 		ip -= 4;
 
@@ -181,10 +218,11 @@
 
 		if (unlikely(faulted))
 			return 0;
-
-		/* If we hit the non-store instruction before finding where the
+		/*
+		 * If we hit the non-store instruction before finding where the
 		 * ra is stored, then this is a leaf function and it does not
-		 * store the ra on the stack. */
+		 * store the ra on the stack
+		 */
 		if ((code & S_R_SP) != S_R_SP)
 			return parent_addr;
 
@@ -202,7 +240,7 @@
 	return 0;
 }
 
-#endif
+#endif	/* !KBUILD_MCOUNT_RA_ADDRESS */
 
 /*
  * Hook the return address and push it in the stack of return addrs
@@ -220,7 +258,8 @@
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
-	/* "parent" is the stack address saved the return address of the caller
+	/*
+	 * "parent" is the stack address saved the return address of the caller
 	 * of _mcount.
 	 *
 	 * if the gcc < 4.5, a leaf function does not save the return address
@@ -242,10 +281,11 @@
 		goto out;
 #ifndef KBUILD_MCOUNT_RA_ADDRESS
 	parent = (unsigned long *)ftrace_get_parent_addr(self_addr, old,
-							 (unsigned long)parent,
-							 fp);
-	/* If fails when getting the stack address of the non-leaf function's
-	 * ra, stop function graph tracer and return */
+			(unsigned long)parent, fp);
+	/*
+	 * If fails when getting the stack address of the non-leaf function's
+	 * ra, stop function graph tracer and return
+	 */
 	if (parent == 0)
 		goto out;
 #endif
@@ -272,4 +312,4 @@
 	ftrace_graph_stop();
 	WARN_ON(1);
 }
-#endif				/* CONFIG_FUNCTION_GRAPH_TRACER */
+#endif	/* CONFIG_FUNCTION_GRAPH_TRACER */
diff -druN linux-libre-2.6.34-gnu/arch/mips/kernel/i8253.c linux-libre-2.6.35-gnu/arch/mips/kernel/i8253.c
--- linux-libre-2.6.34-gnu/arch/mips/kernel/i8253.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/kernel/i8253.c	2010-08-01 18:11:14.000000000 -0400
@@ -15,7 +15,7 @@
 #include <asm/io.h>
 #include <asm/time.h>
 
-DEFINE_SPINLOCK(i8253_lock);
+DEFINE_RAW_SPINLOCK(i8253_lock);
 EXPORT_SYMBOL(i8253_lock);
 
 /*
@@ -26,7 +26,7 @@
 static void init_pit_timer(enum clock_event_mode mode,
 			   struct clock_event_device *evt)
 {
-	spin_lock(&i8253_lock);
+	raw_spin_lock(&i8253_lock);
 
 	switch(mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
@@ -55,7 +55,7 @@
 		/* Nothing to do here */
 		break;
 	}
-	spin_unlock(&i8253_lock);
+	raw_spin_unlock(&i8253_lock);
 }
 
 /*
@@ -65,10 +65,10 @@
  */
 static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
 {
-	spin_lock(&i8253_lock);
+	raw_spin_lock(&i8253_lock);
 	outb_p(delta & 0xff , PIT_CH0);	/* LSB */
 	outb(delta >> 8 , PIT_CH0);	/* MSB */
-	spin_unlock(&i8253_lock);
+	raw_spin_unlock(&i8253_lock);
 
 	return 0;
 }
@@ -137,7 +137,7 @@
 	static int old_count;
 	static u32 old_jifs;
 
-	spin_lock_irqsave(&i8253_lock, flags);
+	raw_spin_lock_irqsave(&i8253_lock, flags);
 	/*
 	 * Although our caller may have the read side of xtime_lock,
 	 * this is now a seqlock, and we are cheating in this routine
@@ -183,7 +183,7 @@
 	old_count = count;
 	old_jifs = jifs;
 
-	spin_unlock_irqrestore(&i8253_lock, flags);
+	raw_spin_unlock_irqrestore(&i8253_lock, flags);
 
 	count = (LATCH - 1) - count;
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/kernel/kgdb.c linux-libre-2.6.35-gnu/arch/mips/kernel/kgdb.c
--- linux-libre-2.6.34-gnu/arch/mips/kernel/kgdb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/kernel/kgdb.c	2010-08-01 18:11:14.000000000 -0400
@@ -180,6 +180,11 @@
 	*(ptr++) = regs->cp0_epc;
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->cp0_epc = pc;
+}
+
 /*
  * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
  * then try to fall into the debugger
@@ -198,7 +203,7 @@
 	if (atomic_read(&kgdb_active) != -1)
 		kgdb_nmicallback(smp_processor_id(), regs);
 
-	if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs))
+	if (kgdb_handle_exception(trap, compute_signal(trap), cmd, regs))
 		return NOTIFY_DONE;
 
 	if (atomic_read(&kgdb_setting_breakpoint))
@@ -212,6 +217,26 @@
 	return NOTIFY_STOP;
 }
 
+#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
+int kgdb_ll_trap(int cmd, const char *str,
+		 struct pt_regs *regs, long err, int trap, int sig)
+{
+	struct die_args args = {
+		.regs	= regs,
+		.str	= str,
+		.err	= err,
+		.trapnr	= trap,
+		.signr	= sig,
+
+	};
+
+	if (!kgdb_io_module_registered)
+		return NOTIFY_DONE;
+
+	return kgdb_mips_notify(NULL, cmd, &args);
+}
+#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
+
 static struct notifier_block kgdb_notifier = {
 	.notifier_call = kgdb_mips_notify,
 };
diff -druN linux-libre-2.6.34-gnu/arch/mips/kernel/mcount.S linux-libre-2.6.35-gnu/arch/mips/kernel/mcount.S
--- linux-libre-2.6.34-gnu/arch/mips/kernel/mcount.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/kernel/mcount.S	2010-08-01 18:11:14.000000000 -0400
@@ -6,6 +6,7 @@
  * more details.
  *
  * Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China
+ * Copyright (C) 2010 DSLab, Lanzhou University, China
  * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  */
 
@@ -45,8 +46,6 @@
 	PTR_L	a5, PT_R9(sp)
 	PTR_L	a6, PT_R10(sp)
 	PTR_L	a7, PT_R11(sp)
-#endif
-#ifdef CONFIG_64BIT
 	PTR_ADDIU	sp, PT_SIZE
 #else
 	PTR_ADDIU	sp, (PT_SIZE + 8)
@@ -58,6 +57,12 @@
 	 move ra, AT
 	.endm
 
+/*
+ * The -mmcount-ra-address option of gcc 4.5 uses register $12 to pass
+ * the location of the parent's return address.
+ */
+#define MCOUNT_RA_ADDRESS_REG	$12
+
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 NESTED(ftrace_caller, PT_SIZE, ra)
@@ -71,14 +76,14 @@
 
 	MCOUNT_SAVE_REGS
 #ifdef KBUILD_MCOUNT_RA_ADDRESS
-	PTR_S	t0, PT_R12(sp)	/* t0 saved the location of the return address(at) by -mmcount-ra-address */
+	PTR_S	MCOUNT_RA_ADDRESS_REG, PT_R12(sp)
 #endif
 
-	move	a0, ra		/* arg1: next ip, selfaddr */
+	move	a0, ra		/* arg1: self return address */
 	.globl ftrace_call
 ftrace_call:
 	nop	/* a placeholder for the call to a real tracing function */
-	 move	a1, AT		/* arg2: the caller's next ip, parent */
+	 move	a1, AT		/* arg2: parent's return address */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	.globl ftrace_graph_call
@@ -119,9 +124,9 @@
 static_trace:
 	MCOUNT_SAVE_REGS
 
-	move	a0, ra		/* arg1: next ip, selfaddr */
+	move	a0, ra		/* arg1: self return address */
 	jalr	t2		/* (1) call *ftrace_trace_function */
-	 move	a1, AT		/* arg2: the caller's next ip, parent */
+	 move	a1, AT		/* arg2: parent's return address */
 
 	MCOUNT_RESTORE_REGS
 	.globl ftrace_stub
@@ -134,28 +139,34 @@
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
 NESTED(ftrace_graph_caller, PT_SIZE, ra)
-#ifdef CONFIG_DYNAMIC_FTRACE
-	PTR_L	a1, PT_R31(sp)	/* load the original ra from the stack */
-#ifdef KBUILD_MCOUNT_RA_ADDRESS
-	PTR_L	t0, PT_R12(sp)	/* load the original t0 from the stack */
-#endif
-#else
+#ifndef CONFIG_DYNAMIC_FTRACE
 	MCOUNT_SAVE_REGS
-	move	a1, ra		/* arg2: next ip, selfaddr */
 #endif
 
+	/* arg1: Get the location of the parent's return address */
 #ifdef KBUILD_MCOUNT_RA_ADDRESS
-	bnez	t0, 1f		/* non-leaf func: t0 saved the location of the return address */
+#ifdef CONFIG_DYNAMIC_FTRACE
+	PTR_L	a0, PT_R12(sp)
+#else
+	move	a0, MCOUNT_RA_ADDRESS_REG
+#endif
+	bnez	a0, 1f	/* non-leaf func: stored in MCOUNT_RA_ADDRESS_REG */
 	 nop
-	PTR_LA	t0, PT_R1(sp)	/* leaf func: get the location of at(old ra) from our own stack */
-1:	move	a0, t0		/* arg1: the location of the return address */
+#endif
+	PTR_LA	a0, PT_R1(sp)	/* leaf func: the location in current stack */
+1:
+
+	/* arg2: Get self return address */
+#ifdef CONFIG_DYNAMIC_FTRACE
+	PTR_L	a1, PT_R31(sp)
 #else
-	PTR_LA	a0, PT_R1(sp)	/* arg1: &AT -> a0 */
+	move	a1, ra
 #endif
-	jal	prepare_ftrace_return
+
+	/* arg3: Get frame pointer of current stack */
 #ifdef CONFIG_FRAME_POINTER
-	 move	a2, fp		/* arg3: frame pointer */
-#else
+	 move	a2, fp
+#else /* ! CONFIG_FRAME_POINTER */
 #ifdef CONFIG_64BIT
 	 PTR_LA	a2, PT_SIZE(sp)
 #else
@@ -163,6 +174,8 @@
 #endif
 #endif
 
+	jal	prepare_ftrace_return
+	 nop
 	MCOUNT_RESTORE_REGS
 	RETURN_BACK
 	END(ftrace_graph_caller)
diff -druN linux-libre-2.6.34-gnu/arch/mips/kernel/mips-mt-fpaff.c linux-libre-2.6.35-gnu/arch/mips/kernel/mips-mt-fpaff.c
--- linux-libre-2.6.34-gnu/arch/mips/kernel/mips-mt-fpaff.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/kernel/mips-mt-fpaff.c	2010-08-01 18:11:14.000000000 -0400
@@ -3,6 +3,7 @@
  * Copyright (C) 2005 Mips Technologies, Inc
  */
 #include <linux/cpu.h>
+#include <linux/cpuset.h>
 #include <linux/cpumask.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
@@ -39,6 +40,21 @@
 	return pid ? find_task_by_vpid(pid) : current;
 }
 
+/*
+ * check the target process has a UID that matches the current process's
+ */
+static bool check_same_owner(struct task_struct *p)
+{
+	const struct cred *cred = current_cred(), *pcred;
+	bool match;
+
+	rcu_read_lock();
+	pcred = __task_cred(p);
+	match = (cred->euid == pcred->euid ||
+		 cred->euid == pcred->uid);
+	rcu_read_unlock();
+	return match;
+}
 
 /*
  * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process
@@ -46,12 +62,10 @@
 asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
 				      unsigned long __user *user_mask_ptr)
 {
-	cpumask_t new_mask;
-	cpumask_t effective_mask;
-	int retval;
-	struct task_struct *p;
+	cpumask_var_t cpus_allowed, new_mask, effective_mask;
 	struct thread_info *ti;
-	uid_t euid;
+	struct task_struct *p;
+	int retval;
 
 	if (len < sizeof(new_mask))
 		return -EINVAL;
@@ -60,53 +74,74 @@
 		return -EFAULT;
 
 	get_online_cpus();
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 
 	p = find_process_by_pid(pid);
 	if (!p) {
-		read_unlock(&tasklist_lock);
+		rcu_read_unlock();
 		put_online_cpus();
 		return -ESRCH;
 	}
 
-	/*
-	 * It is not safe to call set_cpus_allowed with the
-	 * tasklist_lock held.  We will bump the task_struct's
-	 * usage count and drop tasklist_lock before invoking
-	 * set_cpus_allowed.
-	 */
+	/* Prevent p going away */
 	get_task_struct(p);
+	rcu_read_unlock();
 
-	euid = current_euid();
+	if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_put_task;
+	}
+	if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_free_cpus_allowed;
+	}
+	if (!alloc_cpumask_var(&effective_mask, GFP_KERNEL)) {
+		retval = -ENOMEM;
+		goto out_free_new_mask;
+	}
 	retval = -EPERM;
-	if (euid != p->cred->euid && euid != p->cred->uid &&
-	    !capable(CAP_SYS_NICE)) {
-		read_unlock(&tasklist_lock);
+	if (!check_same_owner(p) && !capable(CAP_SYS_NICE))
 		goto out_unlock;
-	}
 
 	retval = security_task_setscheduler(p, 0, NULL);
 	if (retval)
 		goto out_unlock;
 
 	/* Record new user-specified CPU set for future reference */
-	p->thread.user_cpus_allowed = new_mask;
-
-	/* Unlock the task list */
-	read_unlock(&tasklist_lock);
+	cpumask_copy(&p->thread.user_cpus_allowed, new_mask);
 
+ again:
 	/* Compute new global allowed CPU set if necessary */
 	ti = task_thread_info(p);
 	if (test_ti_thread_flag(ti, TIF_FPUBOUND) &&
-	    cpus_intersects(new_mask, mt_fpu_cpumask)) {
-		cpus_and(effective_mask, new_mask, mt_fpu_cpumask);
-		retval = set_cpus_allowed(p, effective_mask);
+	    cpus_intersects(*new_mask, mt_fpu_cpumask)) {
+		cpus_and(*effective_mask, *new_mask, mt_fpu_cpumask);
+		retval = set_cpus_allowed_ptr(p, effective_mask);
 	} else {
+		cpumask_copy(effective_mask, new_mask);
 		clear_ti_thread_flag(ti, TIF_FPUBOUND);
-		retval = set_cpus_allowed(p, new_mask);
+		retval = set_cpus_allowed_ptr(p, new_mask);
 	}
 
+	if (!retval) {
+		cpuset_cpus_allowed(p, cpus_allowed);
+		if (!cpumask_subset(effective_mask, cpus_allowed)) {
+			/*
+			 * We must have raced with a concurrent cpuset
+			 * update. Just reset the cpus_allowed to the
+			 * cpuset's cpus_allowed
+			 */
+			cpumask_copy(new_mask, cpus_allowed);
+			goto again;
+		}
+	}
 out_unlock:
+	free_cpumask_var(effective_mask);
+out_free_new_mask:
+	free_cpumask_var(new_mask);
+out_free_cpus_allowed:
+	free_cpumask_var(cpus_allowed);
+out_put_task:
 	put_task_struct(p);
 	put_online_cpus();
 	return retval;
diff -druN linux-libre-2.6.34-gnu/arch/mips/kernel/scall64-n32.S linux-libre-2.6.35-gnu/arch/mips/kernel/scall64-n32.S
--- linux-libre-2.6.34-gnu/arch/mips/kernel/scall64-n32.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/kernel/scall64-n32.S	2010-08-01 18:11:14.000000000 -0400
@@ -419,4 +419,5 @@
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
 	PTR     compat_sys_recvmmsg
+	PTR     sys_getdents
 	.size	sysn32_call_table,.-sysn32_call_table
diff -druN linux-libre-2.6.34-gnu/arch/mips/kernel/setup.c linux-libre-2.6.35-gnu/arch/mips/kernel/setup.c
--- linux-libre-2.6.34-gnu/arch/mips/kernel/setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/kernel/setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -569,27 +569,6 @@
 	plat_smp_setup();
 }
 
-static int __init fpu_disable(char *s)
-{
-	int i;
-
-	for (i = 0; i < NR_CPUS; i++)
-		cpu_data[i].options &= ~MIPS_CPU_FPU;
-
-	return 1;
-}
-
-__setup("nofpu", fpu_disable);
-
-static int __init dsp_disable(char *s)
-{
-	cpu_data[0].ases &= ~MIPS_ASE_DSP;
-
-	return 1;
-}
-
-__setup("nodsp", dsp_disable);
-
 unsigned long kernelsp[NR_CPUS];
 unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/kernel/traps.c linux-libre-2.6.35-gnu/arch/mips/kernel/traps.c
--- linux-libre-2.6.34-gnu/arch/mips/kernel/traps.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/kernel/traps.c	2010-08-01 18:11:14.000000000 -0400
@@ -26,6 +26,7 @@
 #include <linux/kgdb.h>
 #include <linux/kdebug.h>
 #include <linux/notifier.h>
+#include <linux/kdb.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
@@ -185,6 +186,11 @@
 			regs.regs[29] = task->thread.reg29;
 			regs.regs[31] = 0;
 			regs.cp0_epc = task->thread.reg31;
+#ifdef CONFIG_KGDB_KDB
+		} else if (atomic_read(&kgdb_active) != -1 &&
+			   kdb_current_regs) {
+			memcpy(&regs, kdb_current_regs, sizeof(regs));
+#endif /* CONFIG_KGDB_KDB */
 		} else {
 			prepare_frametrace(&regs);
 		}
@@ -360,6 +366,8 @@
 	unsigned long dvpret = dvpe();
 #endif /* CONFIG_MIPS_MT_SMTC */
 
+	notify_die(DIE_OOPS, str, (struct pt_regs *)regs, SIGSEGV, 0, 0);
+
 	console_verbose();
 	spin_lock_irq(&die_lock);
 	bust_spinlocks(1);
@@ -704,6 +712,11 @@
 	siginfo_t info;
 	char b[40];
 
+#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
+	if (kgdb_ll_trap(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+		return;
+#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
+
 	if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
 		return;
 
@@ -854,7 +867,7 @@
 				= current->cpus_allowed;
 			cpus_and(tmask, current->cpus_allowed,
 				mt_fpu_cpumask);
-			set_cpus_allowed(current, tmask);
+			set_cpus_allowed_ptr(current, &tmask);
 			set_thread_flag(TIF_FPUBOUND);
 		}
 	}
@@ -963,7 +976,7 @@
 
 	case 2:
 		raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs);
-		break;
+		return;
 
 	case 3:
 		break;
diff -druN linux-libre-2.6.34-gnu/arch/mips/kernel/vdso.c linux-libre-2.6.35-gnu/arch/mips/kernel/vdso.c
--- linux-libre-2.6.34-gnu/arch/mips/kernel/vdso.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/kernel/vdso.c	2010-08-01 18:11:14.000000000 -0400
@@ -61,11 +61,9 @@
 
 	vunmap(vdso);
 
-	pr_notice("init_vdso successfull\n");
-
 	return 0;
 }
-device_initcall(init_vdso);
+subsys_initcall(init_vdso);
 
 static unsigned long vdso_addr(unsigned long start)
 {
diff -druN linux-libre-2.6.34-gnu/arch/mips/lasat/image/head.S linux-libre-2.6.35-gnu/arch/mips/lasat/image/head.S
--- linux-libre-2.6.34-gnu/arch/mips/lasat/image/head.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/lasat/image/head.S	2010-08-01 18:11:14.000000000 -0400
@@ -1,7 +1,7 @@
 #include <asm/lasat/head.h>
 
 	.text
-	.section .text.start, "ax"
+	.section .text..start, "ax"
 	.set noreorder
 	.set mips3
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/lasat/image/romscript.normal linux-libre-2.6.35-gnu/arch/mips/lasat/image/romscript.normal
--- linux-libre-2.6.34-gnu/arch/mips/lasat/image/romscript.normal	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/lasat/image/romscript.normal	2010-08-01 18:11:14.000000000 -0400
@@ -4,7 +4,7 @@
 {
   .text :
   {
-    *(.text.start)
+    *(.text..start)
   }
 
   /* Data in ROM */
diff -druN linux-libre-2.6.34-gnu/arch/mips/loongson/common/cs5536/cs5536_ehci.c linux-libre-2.6.35-gnu/arch/mips/loongson/common/cs5536/cs5536_ehci.c
--- linux-libre-2.6.34-gnu/arch/mips/loongson/common/cs5536/cs5536_ehci.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/loongson/common/cs5536/cs5536_ehci.c	2010-08-01 18:11:14.000000000 -0400
@@ -49,6 +49,8 @@
 			lo |= SOFT_BAR_EHCI_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if ((value & 0x01) == 0x00) {
+			_rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo);
+			lo = value;
 			_wrmsr(USB_MSR_REG(USB_EHCI), hi, lo);
 
 			value &= 0xfffffff0;
diff -druN linux-libre-2.6.34-gnu/arch/mips/loongson/common/cs5536/cs5536_ide.c linux-libre-2.6.35-gnu/arch/mips/loongson/common/cs5536/cs5536_ide.c
--- linux-libre-2.6.34-gnu/arch/mips/loongson/common/cs5536/cs5536_ide.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/loongson/common/cs5536/cs5536_ide.c	2010-08-01 18:11:14.000000000 -0400
@@ -51,6 +51,7 @@
 			lo |= SOFT_BAR_IDE_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if (value & 0x01) {
+			_rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo);
 			lo = (value & 0xfffffff0) | 0x1;
 			_wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo);
 
@@ -65,19 +66,30 @@
 			_rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo);
 			lo |= 0x01;
 			_wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo);
-		} else
+		} else {
+			_rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo);
+			lo = value;
 			_wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo);
+		}
 		break;
 	case PCI_IDE_DTC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo);
 		break;
 	case PCI_IDE_CAST_REG:
+		_rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo);
 		break;
 	case PCI_IDE_ETC_REG:
+		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo);
 		break;
 	case PCI_IDE_PM_REG:
+		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
+		lo = value;
 		_wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo);
 		break;
 	default:
@@ -167,6 +179,7 @@
 	case PCI_IDE_ETC_REG:
 		_rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo);
 		conf_data = lo;
+		break;
 	case PCI_IDE_PM_REG:
 		_rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo);
 		conf_data = lo;
diff -druN linux-libre-2.6.34-gnu/arch/mips/loongson/common/cs5536/cs5536_isa.c linux-libre-2.6.35-gnu/arch/mips/loongson/common/cs5536/cs5536_isa.c
--- linux-libre-2.6.34-gnu/arch/mips/loongson/common/cs5536/cs5536_isa.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/loongson/common/cs5536/cs5536_isa.c	2010-08-01 18:11:14.000000000 -0400
@@ -61,7 +61,7 @@
 	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
 		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
 		hi |= 0x01;
-		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
 	}
 }
 
@@ -76,7 +76,7 @@
 	for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
 		_rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
 		hi &= ~0x01;
-		_wrmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), hi, lo);
+		_wrmsr(DIVIL_MSR_REG(offset), hi, lo);
 	}
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/loongson/common/cs5536/cs5536_ohci.c linux-libre-2.6.35-gnu/arch/mips/loongson/common/cs5536/cs5536_ohci.c
--- linux-libre-2.6.34-gnu/arch/mips/loongson/common/cs5536/cs5536_ohci.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/loongson/common/cs5536/cs5536_ohci.c	2010-08-01 18:11:14.000000000 -0400
@@ -49,6 +49,8 @@
 			lo |= SOFT_BAR_OHCI_FLAG;
 			_wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
 		} else if ((value & 0x01) == 0x00) {
+			_rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo);
+			lo = value;
 			_wrmsr(USB_MSR_REG(USB_OHCI), hi, lo);
 
 			value &= 0xfffffff0;
diff -druN linux-libre-2.6.34-gnu/arch/mips/loongson/common/gpio.c linux-libre-2.6.35-gnu/arch/mips/loongson/common/gpio.c
--- linux-libre-2.6.34-gnu/arch/mips/loongson/common/gpio.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/mips/loongson/common/gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,139 @@
+/*
+ *  STLS2F GPIO Support
+ *
+ *  Copyright (c) 2008 Richard Liu,  STMicroelectronics  <richard.liu@st.com>
+ *  Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <asm/types.h>
+#include <loongson.h>
+#include <linux/gpio.h>
+
+#define STLS2F_N_GPIO		4
+#define STLS2F_GPIO_IN_OFFSET	16
+
+static DEFINE_SPINLOCK(gpio_lock);
+
+int gpio_get_value(unsigned gpio)
+{
+	u32 val;
+	u32 mask;
+
+	if (gpio >= STLS2F_N_GPIO)
+		return __gpio_get_value(gpio);
+
+	mask = 1 << (gpio + STLS2F_GPIO_IN_OFFSET);
+	spin_lock(&gpio_lock);
+	val = LOONGSON_GPIODATA;
+	spin_unlock(&gpio_lock);
+
+	return ((val & mask) != 0);
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+void gpio_set_value(unsigned gpio, int state)
+{
+	u32 val;
+	u32 mask;
+
+	if (gpio >= STLS2F_N_GPIO) {
+		__gpio_set_value(gpio, state);
+		return ;
+	}
+
+	mask = 1 << gpio;
+
+	spin_lock(&gpio_lock);
+	val = LOONGSON_GPIODATA;
+	if (state)
+		val |= mask;
+	else
+		val &= (~mask);
+	LOONGSON_GPIODATA = val;
+	spin_unlock(&gpio_lock);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+int gpio_cansleep(unsigned gpio)
+{
+	if (gpio < STLS2F_N_GPIO)
+		return 0;
+	else
+		return __gpio_cansleep(gpio);
+}
+EXPORT_SYMBOL(gpio_cansleep);
+
+static int ls2f_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	u32 temp;
+	u32 mask;
+
+	if (gpio >= STLS2F_N_GPIO)
+		return -EINVAL;
+
+	spin_lock(&gpio_lock);
+	mask = 1 << gpio;
+	temp = LOONGSON_GPIOIE;
+	temp |= mask;
+	LOONGSON_GPIOIE = temp;
+	spin_unlock(&gpio_lock);
+
+	return 0;
+}
+
+static int ls2f_gpio_direction_output(struct gpio_chip *chip,
+		unsigned gpio, int level)
+{
+	u32 temp;
+	u32 mask;
+
+	if (gpio >= STLS2F_N_GPIO)
+		return -EINVAL;
+
+	gpio_set_value(gpio, level);
+	spin_lock(&gpio_lock);
+	mask = 1 << gpio;
+	temp = LOONGSON_GPIOIE;
+	temp &= (~mask);
+	LOONGSON_GPIOIE = temp;
+	spin_unlock(&gpio_lock);
+
+	return 0;
+}
+
+static int ls2f_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	return gpio_get_value(gpio);
+}
+
+static void ls2f_gpio_set_value(struct gpio_chip *chip,
+		unsigned gpio, int value)
+{
+	gpio_set_value(gpio, value);
+}
+
+static struct gpio_chip ls2f_chip = {
+	.label                  = "ls2f",
+	.direction_input        = ls2f_gpio_direction_input,
+	.get                    = ls2f_gpio_get_value,
+	.direction_output       = ls2f_gpio_direction_output,
+	.set                    = ls2f_gpio_set_value,
+	.base                   = 0,
+	.ngpio                  = STLS2F_N_GPIO,
+};
+
+static int __init ls2f_gpio_setup(void)
+{
+	return gpiochip_add(&ls2f_chip);
+}
+arch_initcall(ls2f_gpio_setup);
diff -druN linux-libre-2.6.34-gnu/arch/mips/loongson/common/Makefile linux-libre-2.6.35-gnu/arch/mips/loongson/common/Makefile
--- linux-libre-2.6.34-gnu/arch/mips/loongson/common/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/loongson/common/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -4,6 +4,7 @@
 
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
     pci.o bonito-irq.o mem.o machtype.o platform.o
+obj-$(CONFIG_GENERIC_GPIO) += gpio.o
 
 #
 # Serial port support
@@ -11,6 +12,7 @@
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 obj-$(CONFIG_SERIAL_8250) += serial.o
 obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
+obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
 
 #
 # Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
diff -druN linux-libre-2.6.34-gnu/arch/mips/loongson/common/rtc.c linux-libre-2.6.35-gnu/arch/mips/loongson/common/rtc.c
--- linux-libre-2.6.34-gnu/arch/mips/loongson/common/rtc.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/mips/loongson/common/rtc.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,43 @@
+/*
+ *  Lemote Fuloong platform support
+ *
+ *  Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mc146818rtc.h>
+
+struct resource loongson_rtc_resources[] = {
+	{
+		.start	= RTC_PORT(0),
+		.end	= RTC_PORT(1),
+		.flags	= IORESOURCE_IO,
+	}, {
+		.start	= RTC_IRQ,
+		.end	= RTC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device loongson_rtc_device = {
+	.name		= "rtc_cmos",
+	.id		= -1,
+	.resource	= loongson_rtc_resources,
+	.num_resources	= ARRAY_SIZE(loongson_rtc_resources),
+};
+
+
+static int __init loongson_rtc_platform_init(void)
+{
+	platform_device_register(&loongson_rtc_device);
+	return 0;
+}
+
+device_initcall(loongson_rtc_platform_init);
diff -druN linux-libre-2.6.34-gnu/arch/mips/loongson/Kconfig linux-libre-2.6.35-gnu/arch/mips/loongson/Kconfig
--- linux-libre-2.6.34-gnu/arch/mips/loongson/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/loongson/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -23,6 +23,7 @@
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select CPU_HAS_WB
+	select LOONGSON_MC146818
 	help
 	  Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
 	  an FPGA northbridge
@@ -51,6 +52,7 @@
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select LOONGSON_MC146818
 	help
 	  Lemote Loongson 2F family machines utilize the 2F revision of
 	  Loongson processor and the AMD CS5536 south bridge.
@@ -83,3 +85,7 @@
 	bool
 	default y
 	depends on EARLY_PRINTK || SERIAL_8250
+
+config LOONGSON_MC146818
+	bool
+	default n
diff -druN linux-libre-2.6.34-gnu/arch/mips/math-emu/cp1emu.c linux-libre-2.6.35-gnu/arch/mips/math-emu/cp1emu.c
--- linux-libre-2.6.34-gnu/arch/mips/math-emu/cp1emu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/math-emu/cp1emu.c	2010-08-01 18:11:14.000000000 -0400
@@ -354,7 +354,8 @@
 
 			if (MIPSInst_RD(ir) == FPCREG_CSR) {
 				value = ctx->fcr31;
-				value = (value & ~0x3) | mips_rm[value & 0x3];
+				value = (value & ~FPU_CSR_RM) |
+					mips_rm[modeindex(value)];
 #ifdef CSRTRACE
 				printk("%p gpr[%d]<-csr=%08x\n",
 					(void *) (xcp->cp0_epc),
@@ -907,7 +908,7 @@
 			ieee754sp fs;
 
 			SPFROMREG(fs, MIPSInst_FS(ir));
-			ieee754_csr.rm = ieee_rm[MIPSInst_FUNC(ir) & 0x3];
+			ieee754_csr.rm = ieee_rm[modeindex(MIPSInst_FUNC(ir))];
 			rv.w = ieee754sp_tint(fs);
 			ieee754_csr.rm = oldrm;
 			rfmt = w_fmt;
@@ -933,7 +934,7 @@
 			ieee754sp fs;
 
 			SPFROMREG(fs, MIPSInst_FS(ir));
-			ieee754_csr.rm = ieee_rm[MIPSInst_FUNC(ir) & 0x3];
+			ieee754_csr.rm = ieee_rm[modeindex(MIPSInst_FUNC(ir))];
 			rv.l = ieee754sp_tlong(fs);
 			ieee754_csr.rm = oldrm;
 			rfmt = l_fmt;
@@ -1081,7 +1082,7 @@
 			ieee754dp fs;
 
 			DPFROMREG(fs, MIPSInst_FS(ir));
-			ieee754_csr.rm = ieee_rm[MIPSInst_FUNC(ir) & 0x3];
+			ieee754_csr.rm = ieee_rm[modeindex(MIPSInst_FUNC(ir))];
 			rv.w = ieee754dp_tint(fs);
 			ieee754_csr.rm = oldrm;
 			rfmt = w_fmt;
@@ -1107,7 +1108,7 @@
 			ieee754dp fs;
 
 			DPFROMREG(fs, MIPSInst_FS(ir));
-			ieee754_csr.rm = ieee_rm[MIPSInst_FUNC(ir) & 0x3];
+			ieee754_csr.rm = ieee_rm[modeindex(MIPSInst_FUNC(ir))];
 			rv.l = ieee754dp_tlong(fs);
 			ieee754_csr.rm = oldrm;
 			rfmt = l_fmt;
diff -druN linux-libre-2.6.34-gnu/arch/mips/math-emu/dp_simple.c linux-libre-2.6.35-gnu/arch/mips/math-emu/dp_simple.c
--- linux-libre-2.6.34-gnu/arch/mips/math-emu/dp_simple.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/math-emu/dp_simple.c	2010-08-01 18:11:14.000000000 -0400
@@ -78,6 +78,7 @@
 	DPSIGN(x) = 0;
 
 	if (xc == IEEE754_CLASS_SNAN) {
+		SETCX(IEEE754_INVALID_OPERATION);
 		return ieee754dp_nanxcpt(ieee754dp_indef(), "abs");
 	}
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/math-emu/sp_simple.c linux-libre-2.6.35-gnu/arch/mips/math-emu/sp_simple.c
--- linux-libre-2.6.34-gnu/arch/mips/math-emu/sp_simple.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/math-emu/sp_simple.c	2010-08-01 18:11:14.000000000 -0400
@@ -78,6 +78,7 @@
 	SPSIGN(x) = 0;
 
 	if (xc == IEEE754_CLASS_SNAN) {
+		SETCX(IEEE754_INVALID_OPERATION);
 		return ieee754sp_nanxcpt(ieee754sp_indef(), "abs");
 	}
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/mti-malta/malta-pci.c linux-libre-2.6.35-gnu/arch/mips/mti-malta/malta-pci.c
--- linux-libre-2.6.34-gnu/arch/mips/mti-malta/malta-pci.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/mti-malta/malta-pci.c	2010-08-01 18:11:14.000000000 -0400
@@ -247,6 +247,8 @@
 	iomem_resource.end &= 0xfffffffffULL;			/* 64 GB */
 	ioport_resource.end = controller->io_resource->end;
 
+	controller->io_map_base = mips_io_port_base;
+
 	register_pci_controller(controller);
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/nxp/pnx8550/common/pci.c linux-libre-2.6.35-gnu/arch/mips/nxp/pnx8550/common/pci.c
--- linux-libre-2.6.34-gnu/arch/mips/nxp/pnx8550/common/pci.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/nxp/pnx8550/common/pci.c	2010-08-01 18:11:14.000000000 -0400
@@ -44,6 +44,7 @@
 
 static struct pci_controller pnx8550_controller = {
 	.pci_ops	= &pnx8550_pci_ops,
+	.io_map_base	= PNX8550_PORT_BASE,
 	.io_resource	= &pci_io_resource,
 	.mem_resource	= &pci_mem_resource,
 };
diff -druN linux-libre-2.6.34-gnu/arch/mips/nxp/pnx8550/common/setup.c linux-libre-2.6.35-gnu/arch/mips/nxp/pnx8550/common/setup.c
--- linux-libre-2.6.34-gnu/arch/mips/nxp/pnx8550/common/setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/nxp/pnx8550/common/setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -113,7 +113,7 @@
 	PNX8550_GLB2_ENAB_INTA_O = 0;
 
 	/* IO/MEM resources. */
-	set_io_port_base(KSEG1);
+	set_io_port_base(PNX8550_PORT_BASE);
 	ioport_resource.start = 0;
 	ioport_resource.end = ~0;
 	iomem_resource.start = 0;
diff -druN linux-libre-2.6.34-gnu/arch/mips/oprofile/op_model_loongson2.c linux-libre-2.6.35-gnu/arch/mips/oprofile/op_model_loongson2.c
--- linux-libre-2.6.34-gnu/arch/mips/oprofile/op_model_loongson2.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/oprofile/op_model_loongson2.c	2010-08-01 18:11:14.000000000 -0400
@@ -8,7 +8,6 @@
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
- *
  */
 #include <linux/init.h>
 #include <linux/oprofile.h>
@@ -17,24 +16,18 @@
 #include <loongson.h>			/* LOONGSON2_PERFCNT_IRQ */
 #include "op_impl.h"
 
-/*
- * a patch should be sent to oprofile with the loongson-specific support.
- * otherwise, the oprofile tool will not recognize this and complain about
- * "cpu_type 'unset' is not valid".
- */
 #define LOONGSON2_CPU_TYPE	"mips/loongson2"
 
-#define LOONGSON2_COUNTER1_EVENT(event)	((event & 0x0f) << 5)
-#define LOONGSON2_COUNTER2_EVENT(event)	((event & 0x0f) << 9)
-
-#define LOONGSON2_PERFCNT_EXL			(1UL	<<  0)
-#define LOONGSON2_PERFCNT_KERNEL		(1UL    <<  1)
-#define LOONGSON2_PERFCNT_SUPERVISOR	(1UL    <<  2)
-#define LOONGSON2_PERFCNT_USER			(1UL    <<  3)
-#define LOONGSON2_PERFCNT_INT_EN		(1UL    <<  4)
 #define LOONGSON2_PERFCNT_OVERFLOW		(1ULL   << 31)
 
-/* Loongson2 performance counter register */
+#define LOONGSON2_PERFCTRL_EXL			(1UL	<<  0)
+#define LOONGSON2_PERFCTRL_KERNEL		(1UL    <<  1)
+#define LOONGSON2_PERFCTRL_SUPERVISOR		(1UL    <<  2)
+#define LOONGSON2_PERFCTRL_USER			(1UL    <<  3)
+#define LOONGSON2_PERFCTRL_ENABLE		(1UL    <<  4)
+#define LOONGSON2_PERFCTRL_EVENT(idx, event) \
+	(((event) & 0x0f) << ((idx) ? 9 : 5))
+
 #define read_c0_perfctrl() __read_64bit_c0_register($24, 0)
 #define write_c0_perfctrl(val) __write_64bit_c0_register($24, 0, val)
 #define read_c0_perfcnt() __read_64bit_c0_register($25, 0)
@@ -49,7 +42,12 @@
 
 static char *oprofid = "LoongsonPerf";
 static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
-/* Compute all of the registers in preparation for enabling profiling.  */
+
+static void reset_counters(void *arg)
+{
+	write_c0_perfctrl(0);
+	write_c0_perfcnt(0);
+}
 
 static void loongson2_reg_setup(struct op_counter_config *cfg)
 {
@@ -57,41 +55,38 @@
 
 	reg.reset_counter1 = 0;
 	reg.reset_counter2 = 0;
-	/* Compute the performance counter ctrl word.  */
-	/* For now count kernel and user mode */
+
+	/*
+	 * Compute the performance counter ctrl word.
+	 * For now, count kernel and user mode.
+	 */
 	if (cfg[0].enabled) {
-		ctrl |= LOONGSON2_COUNTER1_EVENT(cfg[0].event);
+		ctrl |= LOONGSON2_PERFCTRL_EVENT(0, cfg[0].event);
 		reg.reset_counter1 = 0x80000000ULL - cfg[0].count;
 	}
 
 	if (cfg[1].enabled) {
-		ctrl |= LOONGSON2_COUNTER2_EVENT(cfg[1].event);
-		reg.reset_counter2 = (0x80000000ULL - cfg[1].count);
+		ctrl |= LOONGSON2_PERFCTRL_EVENT(1, cfg[1].event);
+		reg.reset_counter2 = 0x80000000ULL - cfg[1].count;
 	}
 
 	if (cfg[0].enabled || cfg[1].enabled) {
-		ctrl |= LOONGSON2_PERFCNT_EXL | LOONGSON2_PERFCNT_INT_EN;
+		ctrl |= LOONGSON2_PERFCTRL_EXL | LOONGSON2_PERFCTRL_ENABLE;
 		if (cfg[0].kernel || cfg[1].kernel)
-			ctrl |= LOONGSON2_PERFCNT_KERNEL;
+			ctrl |= LOONGSON2_PERFCTRL_KERNEL;
 		if (cfg[0].user || cfg[1].user)
-			ctrl |= LOONGSON2_PERFCNT_USER;
+			ctrl |= LOONGSON2_PERFCTRL_USER;
 	}
 
 	reg.ctrl = ctrl;
 
 	reg.cnt1_enabled = cfg[0].enabled;
 	reg.cnt2_enabled = cfg[1].enabled;
-
 }
 
-/* Program all of the registers in preparation for enabling profiling.  */
-
 static void loongson2_cpu_setup(void *args)
 {
-	uint64_t perfcount;
-
-	perfcount = (reg.reset_counter2 << 32) | reg.reset_counter1;
-	write_c0_perfcnt(perfcount);
+	write_c0_perfcnt((reg.reset_counter2 << 32) | reg.reset_counter1);
 }
 
 static void loongson2_cpu_start(void *args)
@@ -114,15 +109,8 @@
 	struct pt_regs *regs = get_irq_regs();
 	int enabled;
 
-	/*
-	 * LOONGSON2 defines two 32-bit performance counters.
-	 * To avoid a race updating the registers we need to stop the counters
-	 * while we're messing with
-	 * them ...
-	 */
-
 	/* Check whether the irq belongs to me */
-	enabled = read_c0_perfctrl() & LOONGSON2_PERFCNT_INT_EN;
+	enabled = read_c0_perfctrl() & LOONGSON2_PERFCTRL_ENABLE;
 	if (!enabled)
 		return IRQ_NONE;
 	enabled = reg.cnt1_enabled | reg.cnt2_enabled;
@@ -157,7 +145,7 @@
 
 static void loongson2_exit(void)
 {
-	write_c0_perfctrl(0);
+	reset_counters(NULL);
 	free_irq(LOONGSON2_PERFCNT_IRQ, oprofid);
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/mips/pci/ops-pmcmsp.c linux-libre-2.6.35-gnu/arch/mips/pci/ops-pmcmsp.c
--- linux-libre-2.6.34-gnu/arch/mips/pci/ops-pmcmsp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/pci/ops-pmcmsp.c	2010-08-01 18:11:14.000000000 -0400
@@ -944,6 +944,7 @@
 	.pci_ops	= &msp_pci_ops,
 	.mem_resource	= &pci_mem_resource,
 	.mem_offset	= 0,
+	.io_map_base	= MSP_PCI_IOSPACE_BASE,
 	.io_resource	= &pci_io_resource,
 	.io_offset	= 0
 };
diff -druN linux-libre-2.6.34-gnu/arch/mips/pci/pci-yosemite.c linux-libre-2.6.35-gnu/arch/mips/pci/pci-yosemite.c
--- linux-libre-2.6.34-gnu/arch/mips/pci/pci-yosemite.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/pci/pci-yosemite.c	2010-08-01 18:11:14.000000000 -0400
@@ -54,6 +54,7 @@
 		panic(ioremap_failed);
 
 	set_io_port_base(io_v_base);
+	py_controller.io_map_base = io_v_base;
 	TITAN_WRITE(RM9000x2_OCD_LKM7, TITAN_READ(RM9000x2_OCD_LKM7) | 1);
 
 	ioport_resource.end = TITAN_IO_SIZE - 1;
diff -druN linux-libre-2.6.34-gnu/arch/mips/powertv/asic/asic_devices.c linux-libre-2.6.35-gnu/arch/mips/powertv/asic/asic_devices.c
--- linux-libre-2.6.34-gnu/arch/mips/powertv/asic/asic_devices.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/powertv/asic/asic_devices.c	2010-08-01 18:11:14.000000000 -0400
@@ -472,6 +472,9 @@
 		 * it*/
 		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
 
+		/* Cronus and Cronus Lite have the same register map */
+		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
+
 		/* ASIC version will determine if this is a real CronusLite or
 		 * Castrati(Cronus) */
 		chipversion  = asic_read(chipver3) << 24;
@@ -484,8 +487,6 @@
 		else
 			asic = ASIC_CRONUSLITE;
 
-		/* Cronus and Cronus Lite have the same register map */
-		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
 		gp_resources = non_dvr_cronuslite_resources;
 		pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
 			"chipversion=0x%08X\n",
diff -druN linux-libre-2.6.34-gnu/arch/mips/powertv/asic/prealloc-calliope.c linux-libre-2.6.35-gnu/arch/mips/powertv/asic/prealloc-calliope.c
--- linux-libre-2.6.34-gnu/arch/mips/powertv/asic/prealloc-calliope.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/powertv/asic/prealloc-calliope.c	2010-08-01 18:11:14.000000000 -0400
@@ -22,7 +22,9 @@
  */
 
 #include <linux/init.h>
+#include <linux/ioport.h>
 #include <asm/mach-powertv/asic.h>
+#include "prealloc.h"
 
 /*
  * NON_DVR_CAPABLE CALLIOPE RESOURCES
@@ -32,432 +34,234 @@
 	/*
 	 * VIDEO / LX1
 	 */
-	{
-		.name   = "ST231aImage",     	/* Delta-Mu 1 image and ram */
-		.start  = 0x24000000,
-		.end    = 0x24200000 - 1,	/*2MiB */
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ST231aMonitor",   /*8KiB block ST231a monitor */
-		.start  = 0x24200000,
-		.end    = 0x24202000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x24202000,
-		.end    = 0x26700000 - 1, /*~36.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~36.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26700000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Sysaudio Driver
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * STAVEM driver/STAPI
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x00000000,
-		.end    = 0x00600000 - 1,	/* 6 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 6MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * DOCSIS Subsystem
 	 */
-	{
-		.name   = "Docsis",
-		.start  = 0x22000000,
-		.end    = 0x22700000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 7MiB */
+	PREALLOC_DOCSIS("Docsis", 0x27500000, 0x27c00000-1, IORESOURCE_MEM)
+
 	/*
 	 * GHW HAL Driver
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x22700000,
-		.end    = 0x23500000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x26700000, 0x26700000+(14*1048576)-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * multi com buffer area
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x23700000,
-		.end    = 0x23720000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x23700000, 0x23720000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * DMA Ring buffer (don't need recording buffers)
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 680KiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Display bins buffer for unit0
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,		/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * AVFS: player HAL memory
-	 *
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x00000000,
-		.end    = 0x002c4c00 - 1,	/* 945K * 3 for playback */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 945K * 3 for playback */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * PMEM
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Smartcard
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x00000000,
-		.end    = 0x2800 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * NAND Flash
 	 */
-	{
-		.name   = "NandFlash",
-		.start  = NAND_FLASH_BASE,
-		.end    = NAND_FLASH_BASE + 0x400 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* 10KiB */
+	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Synopsys GMAC Memory Region
 	 */
-	{
-		.name   = "GMAC",
-		.start  = 0x00000000,
-		.end    = 0x00010000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 64KiB */
+	PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 * Add other resources here
+	 * TFTPBuffer
 	 *
+	 *  This buffer is used in some minimal configurations (e.g. two-way
+	 *  loader) for storing software images
 	 */
-	{ },
-};
+	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
 
-struct resource non_dvr_vz_calliope_resources[] __initdata =
-{
-	/*
-	 * VIDEO / LX1
-	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x24000000,
-		.end    = 0x24200000 - 1, /*2 Meg */
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8k block ST231a monitor */
-		.start  = 0x24200000,
-		.end    = 0x24202000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x22202000,
-		.end    = 0x22C20B85 - 1,	/* 10.12 Meg */
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * Sysaudio Driver
-	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * STAVEM driver/STAPI
-	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x20300000,
-		.end    = 0x20620000-1,  /*3.125 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * GHW HAL Driver
-	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x20100000,
-		.end    = 0x20300000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * multi com buffer area
-	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x23900000,
-		.end    = 0x23920000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * DMA Ring buffer
-	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * Display bins buffer for unit0
-	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * PMEM
-	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	/*
-	 * Smartcard
-	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x00000000,
-		.end    = 0x2800 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
 	/*
-	 * NAND Flash
+	 * Add other resources here
 	 */
-	{
-		.name   = "NandFlash",
-		.start  = NAND_FLASH_BASE,
-		.end    = NAND_FLASH_BASE+0x400 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+
 	/*
-	 * Synopsys GMAC Memory Region
+	 * End of Resource marker
 	 */
 	{
-		.name   = "GMAC",
-		.start  = 0x00000000,
-		.end    = 0x00010000 - 1,
-		.flags  = IORESOURCE_MEM,
+		.flags  = 0,
 	},
-	/*
-	 * Add other resources here
-	 */
-	{ },
 };
 
+
 struct resource non_dvr_vze_calliope_resources[] __initdata =
 {
 	/*
 	 * VIDEO / LX1
 	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x22000000,
-		.end    = 0x22200000 - 1,	/*2  Meg */
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8k block ST231a monitor */
-		.start  = 0x22200000,
-		.end    = 0x22202000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x22202000,
-		.end    = 0x22C20B85 - 1,	/* 10.12 Meg */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x22000000, 0x22200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x22200000, 0x22202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (10.12MiB) */
+	PREALLOC_NORMAL("MediaMemory1", 0x22202000, 0x22C20B85-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Sysaudio Driver
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (16KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (16KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * STAVEM driver/STAPI
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x20396000,
-		.end    = 0x206B6000 - 1,		/* 3.125 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 3.125MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x20396000, 0x206B6000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * GHW HAL Driver
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x20100000,
-		.end    = 0x20396000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* PowerTV Graphics Heap (2.59MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x20100000, 0x20396000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * multi com buffer area
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x206B6000,
-		.end    = 0x206D6000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x206B6000, 0x206D6000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 * DMA Ring buffer
+	 * DMA Ring buffer (don't need recording buffers)
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 680KiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Display bins buffer for unit0
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * PMEM
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Smartcard
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x00000000,
-		.end    = 0x2800 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * NAND Flash
 	 */
-	{
-		.name   = "NandFlash",
-		.start  = NAND_FLASH_BASE,
-		.end    = NAND_FLASH_BASE+0x400 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 10KiB */
+	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Synopsys GMAC Memory Region
 	 */
-	{
-		.name   = "GMAC",
-		.start  = 0x00000000,
-		.end    = 0x00010000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 64KiB */
+	PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Add other resources here
 	 */
-	{ },
+
+	/*
+	 * End of Resource marker
+	 */
+	{
+		.flags  = 0,
+	},
 };
 
 struct resource non_dvr_vzf_calliope_resources[] __initdata =
@@ -465,156 +269,117 @@
 	/*
 	 * VIDEO / LX1
 	 */
-	{
-		.name   = "ST231aImage",	/*Delta-Mu 1 image and ram */
-		.start  = 0x24000000,
-		.end    = 0x24200000 - 1,	/*2MiB */
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ST231aMonitor",	/*8KiB block ST231a monitor */
-		.start  = 0x24200000,
-		.end    = 0x24202000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x24202000,
-		/* ~19.4 (21.5MiB - (2MiB + 8KiB)) */
-		.end    = 0x25580000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~19.4 (21.5MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x25580000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Sysaudio Driver
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * STAVEM driver/STAPI
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x00000000,
-		.end    = 0x00480000 - 1,  /* 4.5 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4.5MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00480000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * GHW HAL Driver
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x22700000,
-		.end    = 0x23500000 - 1, /* 14 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x25600000, 0x25600000+(14*1048576)-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * multi com buffer area
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x23700000,
-		.end    = 0x23720000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x23700000, 0x23720000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * DMA Ring buffer (don't need recording buffers)
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 680KiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Display bins buffer for unit0
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,  /* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Display bins buffer for unit1
 	 */
-	{
-		.name   = "DisplayBins1",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,  /* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * AVFS: player HAL memory
-	 *
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x00000000,
-		.end    = 0x002c4c00 - 1,  /* 945K * 3 for playback */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 945K * 3 for playback */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * PMEM
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Smartcard
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x00000000,
-		.end    = 0x2800 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * NAND Flash
 	 */
-	{
-		.name   = "NandFlash",
-		.start  = NAND_FLASH_BASE,
-		.end    = NAND_FLASH_BASE + 0x400 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 10KiB */
+	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Synopsys GMAC Memory Region
 	 */
-	{
-		.name   = "GMAC",
-		.start  = 0x00000000,
-		.end    = 0x00010000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 64KiB */
+	PREALLOC_NORMAL("GMAC", 0x00000000, 0x00010000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Add other resources here
 	 */
-	{ },
+
+	/*
+	 * End of Resource marker
+	 */
+	{
+		.flags  = 0,
+	},
 };
diff -druN linux-libre-2.6.34-gnu/arch/mips/powertv/asic/prealloc-cronus.c linux-libre-2.6.35-gnu/arch/mips/powertv/asic/prealloc-cronus.c
--- linux-libre-2.6.34-gnu/arch/mips/powertv/asic/prealloc-cronus.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/powertv/asic/prealloc-cronus.c	2010-08-01 18:11:14.000000000 -0400
@@ -22,7 +22,9 @@
  */
 
 #include <linux/init.h>
+#include <linux/ioport.h>
 #include <asm/mach-powertv/asic.h>
+#include "prealloc.h"
 
 /*
  * DVR_CAPABLE CRONUS RESOURCES
@@ -30,305 +32,161 @@
 struct resource dvr_cronus_resources[] __initdata =
 {
 	/*
-	 *
 	 * VIDEO1 / LX1
-	 *
 	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x24000000,
-		.end    = 0x241FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start  = 0x24200000,
-		.end    = 0x24201FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x24202000,
-		.end    = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * VIDEO2 / LX2
-	 *
 	 */
-	{
-		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
-		.start  = 0x60000000,
-		.end    = 0x601FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
-		.start  = 0x60200000,
-		.end    = 0x60201FFF,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "MediaMemory2",
-		.start  = 0x60202000,
-		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
-	},
+	/* Delta-Mu 2 image (2MiB) */
+	PREALLOC_NORMAL("ST231bImage", 0x60000000, 0x60200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 2 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231bMonitor", 0x60200000, 0x60202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory2", 0x60202000, 0x62000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * Sysaudio Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  DSP_Image_Buff - DSP code and data images (1MB)
-	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
-	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
-	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
-	 *
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * STAVEM driver/STAPI
 	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
 	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
-	 *
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x63580000,
-		.end    = 0x64180000 - 1,  /* 12 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 12MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * DOCSIS Subsystem
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "Docsis",
-		.start  = 0x62000000,
-		.end    = 0x62700000 - 1,	/* 7 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 7MiB */
+	PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * GHW HAL Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  GraphicsHeap - PowerTV Graphics Heap
-	 *
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x62700000,
-		.end    = 0x63500000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * multi com buffer area
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x26000000,
-		.end    = 0x26020000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * DMA Ring buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x00280000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x002EA000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Display bins buffer for unit0
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit0
-	 *
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,		/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
-	 * Display bins buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit1
-	 *
+	 * Display bins buffer for unit1
 	 */
-	{
-		.name   = "DisplayBins1",
-		.start  = 0x64AD4000,
-		.end    = 0x64AD5000 - 1,  /* 4 KB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * ITFS
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "ITFS",
-		.start  = 0x64180000,
-		/* 815,104 bytes each for 2 ITFS partitions. */
-		.end    = 0x6430DFFF,
-		.flags  = IORESOURCE_IO,
-	},
+	/* 815,104 bytes each for 2 ITFS partitions. */
+	PREALLOC_NORMAL("ITFS", 0x00000000, 0x0018E000-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * AVFS
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x6430E000,
-		/* (945K * 8) = (128K *3) 5 playbacks / 3 server */
-		.end    = 0x64AD0000 - 1,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "AvfsFileSys",
-		.start  = 0x64AD0000,
-		.end    = 0x64AD1000 - 1,  /* 4K */
-		.flags  = IORESOURCE_IO,
-	},
+	/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x007c2000-1,
+		IORESOURCE_MEM)
+
+	/* 4KiB */
+	PREALLOC_NORMAL("AvfsFileSys", 0x00000000, 0x00001000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * PMEM
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Persistent memory for diagnostics.
-	 *
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Smartcard
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Read and write buffers for Internal/External cards
-	 *
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x64AD1000,
-		.end    = 0x64AD3800 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * KAVNET
-	 *    NP Reset Vector - must be of the form xxCxxxxx
-	 *	   NP Image - must be video bank 1
-	 *	   NP IPC - must be video bank 2
 	 */
-	{
-		.name   = "NP_Reset_Vector",
-		.start  = 0x27c00000,
-		.end    = 0x27c01000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "NP_Image",
-		.start  = 0x27020000,
-		.end    = 0x27060000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "NP_IPC",
-		.start  = 0x63500000,
-		.end    = 0x63580000 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
+	PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
+		IORESOURCE_MEM)
+	/* NP Image - must be video bank 1 (320KiB) */
+	PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
+	/* NP IPC - must be video bank 2 (512KiB) */
+	PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
+
+	/*
+	 * TFTPBuffer
+	 *
+	 *  This buffer is used in some minimal configurations (e.g. two-way
+	 *  loader) for storing software images
+	 */
+	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Add other resources here
 	 */
-	{ },
+
+	/*
+	 * End of Resource marker
+	 */
+	{
+		.flags  = 0,
+	},
 };
 
 /*
@@ -337,272 +195,146 @@
 struct resource non_dvr_cronus_resources[] __initdata =
 {
 	/*
-	 *
 	 * VIDEO1 / LX1
-	 *
 	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x24000000,
-		.end    = 0x241FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start  = 0x24200000,
-		.end    = 0x24201FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x24202000,
-		.end    = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x24000000, 0x24200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x24200000, 0x24202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x24202000, 0x26000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * VIDEO2 / LX2
-	 *
 	 */
-	{
-		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
-		.start  = 0x60000000,
-		.end    = 0x601FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
-		.start  = 0x60200000,
-		.end    = 0x60201FFF,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "MediaMemory2",
-		.start  = 0x60202000,
-		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
-	},
+	/* Delta-Mu 2 image (2MiB) */
+	PREALLOC_NORMAL("ST231bImage", 0x60000000, 0x60200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 2 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231bMonitor", 0x60200000, 0x60202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory2", 0x60202000, 0x62000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * Sysaudio Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  DSP_Image_Buff - DSP code and data images (1MB)
-	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
-	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
-	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
-	 *
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * STAVEM driver/STAPI
 	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
 	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
-	 *
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x63580000,
-		.end    = 0x64180000 - 1,  /* 12 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 12MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * DOCSIS Subsystem
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "Docsis",
-		.start  = 0x62000000,
-		.end    = 0x62700000 - 1,	/* 7 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 7MiB */
+	PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * GHW HAL Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  GraphicsHeap - PowerTV Graphics Heap
-	 *
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x62700000,
-		.end    = 0x63500000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * multi com buffer area
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x26000000,
-		.end    = 0x26020000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
-	 * DMA Ring buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
+	 * DMA Ring buffer (don't need recording buffers)
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 680KiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Display bins buffer for unit0
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit0
-	 *
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,		/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
-	 * Display bins buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit1
-	 *
+	 * Display bins buffer for unit1
 	 */
-	{
-		.name   = "DisplayBins1",
-		.start  = 0x64AD4000,
-		.end    = 0x64AD5000 - 1,  /* 4 KB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * AVFS: player HAL memory
-	 *
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x6430E000,
-		.end    = 0x645D2C00 - 1,  /* 945K * 3 for playback */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 945K * 3 for playback */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * PMEM
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Persistent memory for diagnostics.
-	 *
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Smartcard
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Read and write buffers for Internal/External cards
-	 *
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x64AD1000,
-		.end    = 0x64AD3800 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * KAVNET
-	 *    NP Reset Vector - must be of the form xxCxxxxx
-	 *	   NP Image - must be video bank 1
-	 *	   NP IPC - must be video bank 2
+	 */
+	/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
+	PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
+		IORESOURCE_MEM)
+	/* NP Image - must be video bank 1 (320KiB) */
+	PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
+	/* NP IPC - must be video bank 2 (512KiB) */
+	PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
+
+	/*
+	 * NAND Flash
+	 */
+	/* 10KiB */
+	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
+		IORESOURCE_MEM)
+
+	/*
+	 * Add other resources here
+	 */
+
+	/*
+	 * End of Resource marker
 	 */
 	{
-		.name   = "NP_Reset_Vector",
-		.start  = 0x27c00000,
-		.end    = 0x27c01000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "NP_Image",
-		.start  = 0x27020000,
-		.end    = 0x27060000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "NP_IPC",
-		.start  = 0x63500000,
-		.end    = 0x63580000 - 1,
-		.flags  = IORESOURCE_IO,
+		.flags  = 0,
 	},
-	{ },
 };
diff -druN linux-libre-2.6.34-gnu/arch/mips/powertv/asic/prealloc-cronuslite.c linux-libre-2.6.35-gnu/arch/mips/powertv/asic/prealloc-cronuslite.c
--- linux-libre-2.6.34-gnu/arch/mips/powertv/asic/prealloc-cronuslite.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/powertv/asic/prealloc-cronuslite.c	2010-08-01 18:11:14.000000000 -0400
@@ -22,7 +22,9 @@
  */
 
 #include <linux/init.h>
+#include <linux/ioport.h>
 #include <asm/mach-powertv/asic.h>
+#include "prealloc.h"
 
 /*
  * NON_DVR_CAPABLE CRONUSLITE RESOURCES
@@ -30,261 +32,143 @@
 struct resource non_dvr_cronuslite_resources[] __initdata =
 {
 	/*
-	 *
 	 * VIDEO2 / LX2
-	 *
 	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 2 image and ram */
-		.start  = 0x60000000,
-		.end    = 0x601FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8KiB block ST231b monitor */
-		.start  = 0x60200000,
-		.end    = 0x60201FFF,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x60202000,
-		.end    = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x60000000, 0x60200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x60200000, 0x60202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x60202000, 0x62000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * Sysaudio Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  DSP_Image_Buff - DSP code and data images (1MB)
-	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
-	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
-	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
-	 *
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (128KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00020000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * STAVEM driver/STAPI
 	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
 	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
-	 *
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x63580000,
-		.end    = 0x63B80000 - 1,  /* 6 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 6MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * DOCSIS Subsystem
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "Docsis",
-		.start  = 0x62000000,
-		.end    = 0x62700000 - 1,	/* 7 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 7MiB */
+	PREALLOC_DOCSIS("Docsis", 0x67500000, 0x67c00000-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * GHW HAL Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  GraphicsHeap - PowerTV Graphics Heap
-	 *
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x62700000,
-		.end    = 0x63500000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x62700000, 0x63500000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * multi com buffer area
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x26000000,
-		.end    = 0x26020000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x26000000, 0x26020000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
-	 * DMA Ring buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
+	 * DMA Ring buffer (don't need recording buffers)
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x000AA000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 680KiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x000AA000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Display bins buffer for unit0
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit0
-	 *
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,		/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
-	 * Display bins buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit1
-	 *
+	 * Display bins buffer for unit1
 	 */
-	{
-		.name   = "DisplayBins1",
-		.start  = 0x63B83000,
-		.end    = 0x63B84000 - 1,  /* 4 KB total */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * AVFS: player HAL memory
-	 *
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x63B84000,
-		.end    = 0x63E48C00 - 1,  /* 945K * 3 for playback */
-		.flags  = IORESOURCE_IO,
-	},
+	/* 945K * 3 for playback */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * PMEM
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Persistent memory for diagnostics.
-	 *
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Smartcard
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Read and write buffers for Internal/External cards
-	 *
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x63B80000,
-		.end    = 0x63B82800 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * KAVNET
-	 *    NP Reset Vector - must be of the form xxCxxxxx
-	 *	   NP Image - must be video bank 1
-	 *	   NP IPC - must be video bank 2
 	 */
-	{
-		.name   = "NP_Reset_Vector",
-		.start  = 0x27c00000,
-		.end    = 0x27c01000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "NP_Image",
-		.start  = 0x27020000,
-		.end    = 0x27060000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "NP_IPC",
-		.start  = 0x63500000,
-		.end    = 0x63580000 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* NP Reset Vector - must be of the form xxCxxxxx (4KiB) */
+	PREALLOC_NORMAL("NP_Reset_Vector", 0x27c00000, 0x27c01000-1,
+		IORESOURCE_MEM)
+	/* NP Image - must be video bank 1 (320KiB) */
+	PREALLOC_NORMAL("NP_Image", 0x27020000, 0x27070000-1, IORESOURCE_MEM)
+	/* NP IPC - must be video bank 2 (512KiB) */
+	PREALLOC_NORMAL("NP_IPC", 0x63500000, 0x63580000-1, IORESOURCE_MEM)
+
 	/*
 	 * NAND Flash
 	 */
-	{
-		.name   = "NandFlash",
-		.start  = NAND_FLASH_BASE,
-		.end    = NAND_FLASH_BASE + 0x400 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* 10KiB */
+	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
+		IORESOURCE_MEM)
+
+	/*
+	 * TFTPBuffer
+	 *
+	 *  This buffer is used in some minimal configurations (e.g. two-way
+	 *  loader) for storing software images
+	 */
+	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Add other resources here
 	 */
-	{ },
+
+	/*
+	 * End of Resource marker
+	 */
+	{
+		.flags  = 0,
+	},
 };
diff -druN linux-libre-2.6.34-gnu/arch/mips/powertv/asic/prealloc.h linux-libre-2.6.35-gnu/arch/mips/powertv/asic/prealloc.h
--- linux-libre-2.6.34-gnu/arch/mips/powertv/asic/prealloc.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/mips/powertv/asic/prealloc.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,70 @@
+/*
+ * Definitions for memory preallocations
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H
+#define _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H
+
+#define KIBIBYTE(n) ((n) * 1024)    /* Number of kibibytes */
+#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */
+
+/* "struct resource" array element definition */
+#define PREALLOC(NAME, START, END, FLAGS) {	\
+		.name = (NAME),			\
+		.start = (START),		\
+		.end = (END),			\
+		.flags = (FLAGS)		\
+	},
+
+/* Individual resources in the preallocated resource arrays are defined using
+ *  macros.  These macros are conditionally defined based on their
+ *  corresponding kernel configuration flag:
+ *    - CONFIG_PREALLOC_NORMAL: preallocate resources for a normal settop box
+ *    - CONFIG_PREALLOC_TFTP: preallocate the TFTP download resource
+ *    - CONFIG_PREALLOC_DOCSIS: preallocate the DOCSIS resource
+ *    - CONFIG_PREALLOC_PMEM: reserve space for persistent memory
+ */
+#ifdef CONFIG_PREALLOC_NORMAL
+#define PREALLOC_NORMAL(name, start, end, flags) \
+   PREALLOC(name, start, end, flags)
+#else
+#define PREALLOC_NORMAL(name, start, end, flags)
+#endif
+
+#ifdef CONFIG_PREALLOC_TFTP
+#define PREALLOC_TFTP(name, start, end, flags) \
+   PREALLOC(name, start, end, flags)
+#else
+#define PREALLOC_TFTP(name, start, end, flags)
+#endif
+
+#ifdef CONFIG_PREALLOC_DOCSIS
+#define PREALLOC_DOCSIS(name, start, end, flags) \
+   PREALLOC(name, start, end, flags)
+#else
+#define PREALLOC_DOCSIS(name, start, end, flags)
+#endif
+
+#ifdef CONFIG_PREALLOC_PMEM
+#define PREALLOC_PMEM(name, start, end, flags) \
+   PREALLOC(name, start, end, flags)
+#else
+#define PREALLOC_PMEM(name, start, end, flags)
+#endif
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/mips/powertv/asic/prealloc-zeus.c linux-libre-2.6.35-gnu/arch/mips/powertv/asic/prealloc-zeus.c
--- linux-libre-2.6.34-gnu/arch/mips/powertv/asic/prealloc-zeus.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/powertv/asic/prealloc-zeus.c	2010-08-01 18:11:14.000000000 -0400
@@ -22,7 +22,9 @@
  */
 
 #include <linux/init.h>
+#include <linux/ioport.h>
 #include <asm/mach-powertv/asic.h>
+#include "prealloc.h"
 
 /*
  * DVR_CAPABLE RESOURCES
@@ -30,280 +32,151 @@
 struct resource dvr_zeus_resources[] __initdata =
 {
 	/*
-	 *
 	 * VIDEO1 / LX1
-	 *
 	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x20000000,
-		.end    = 0x201FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start  = 0x20200000,
-		.end    = 0x20201FFF,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x20202000,
-		.end    = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x20000000, 0x20200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x20200000, 0x20202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x20202000, 0x22000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * VIDEO2 / LX2
-	 *
 	 */
-	{
-		.name   = "ST231bImage",	/* Delta-Mu 2 image and ram */
-		.start  = 0x30000000,
-		.end    = 0x301FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "ST231bMonitor",	/* 8KiB block ST231b monitor */
-		.start  = 0x30200000,
-		.end    = 0x30201FFF,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "MediaMemory2",
-		.start  = 0x30202000,
-		.end    = 0x31FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
-	},
+	/* Delta-Mu 2 image (2MiB) */
+	PREALLOC_NORMAL("ST231bImage", 0x30000000, 0x30200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 2 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231bMonitor", 0x30200000, 0x30202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 2 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory2", 0x30202000, 0x32000000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * Sysaudio Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  DSP_Image_Buff - DSP code and data images (1MB)
-	 *  ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
-	 *  ADSC_AUX_Buff - ADSC AUX buffer (16KB)
-	 *  ADSC_Main_Buff - ADSC Main buffer (16KB)
-	 *
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (16KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (16KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * STAVEM driver/STAPI
 	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
 	 *  This memory area is used for allocating buffers for Video decoding
 	 *  purposes.  Allocation/De-allocation within this buffer is managed
 	 *  by the STAVMEM driver of the STAPI.  They could be Decimated
 	 *  Picture Buffers, Intermediate Buffers, as deemed necessary for
 	 *  video decoding purposes, for any video decoders on Zeus.
-	 *
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x00000000,
-		.end    = 0x00c00000 - 1,	/* 12 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 12MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00c00000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * DOCSIS Subsystem
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "Docsis",
-		.start  = 0x40100000,
-		.end    = 0x407fffff,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 7MiB */
+	PREALLOC_DOCSIS("Docsis", 0x40100000, 0x40800000-1, IORESOURCE_MEM)
+
 	/*
-	 *
 	 * GHW HAL Driver
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  GraphicsHeap - PowerTV Graphics Heap
-	 *
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x46900000,
-		.end    = 0x47700000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x46900000, 0x47700000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * multi com buffer area
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x47900000,
-		.end    = 0x47920000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x47900000, 0x47920000-1,
+		IORESOURCE_MEM)
+
 	/*
-	 *
 	 * DMA Ring buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x00280000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 2.5MiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x00280000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Display bins buffer for unit0
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit0
-	 *
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,	/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
-	 * Display bins buffer
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Display Bins for unit1
-	 *
+	 * Display bins buffer for unit1
 	 */
-	{
-		.name   = "DisplayBins1",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,	/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins1", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * ITFS
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "ITFS",
-		.start  = 0x00000000,
-		/* 815,104 bytes each for 2 ITFS partitions. */
-		.end    = 0x0018DFFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 815,104 bytes each for 2 ITFS partitions. */
+	PREALLOC_NORMAL("ITFS", 0x00000000, 0x0018E000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * AVFS
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Docsis -
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x00000000,
-		/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
-		.end    = 0x007c2000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "AvfsFileSys",
-		.start  = 0x00000000,
-		.end    = 0x00001000 - 1,  /* 4K */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x007c2000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* 4KiB */
+	PREALLOC_NORMAL("AvfsFileSys", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * PMEM
-	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Persistent memory for diagnostics.
-	 *
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * Smartcard
+	 */
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
+	/*
+	 * TFTPBuffer
 	 *
-	 * This driver requires:
-	 *
-	 * Arbitrary Based Buffers:
-	 *  Read and write buffers for Internal/External cards
-	 *
+	 *  This buffer is used in some minimal configurations (e.g. two-way
+	 *  loader) for storing software images
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x00000000,
-		.end    = 0x2800 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Add other resources here
 	 */
-	{ },
+
+	/*
+	 * End of Resource marker
+	 */
+	{
+		.flags  = 0,
+	},
 };
 
 /*
@@ -314,146 +187,118 @@
 	/*
 	 * VIDEO1 / LX1
 	 */
-	{
-		.name   = "ST231aImage",	/* Delta-Mu 1 image and ram */
-		.start  = 0x20000000,
-		.end    = 0x201FFFFF,		/* 2MiB */
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "ST231aMonitor",	/* 8KiB block ST231a monitor */
-		.start  = 0x20200000,
-		.end    = 0x20201FFF,
-		.flags  = IORESOURCE_IO,
-	},
-	{
-		.name   = "MediaMemory1",
-		.start  = 0x20202000,
-		.end    = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
-		.flags  = IORESOURCE_IO,
-	},
+	/* Delta-Mu 1 image (2MiB) */
+	PREALLOC_NORMAL("ST231aImage", 0x20000000, 0x20200000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 monitor (8KiB) */
+	PREALLOC_NORMAL("ST231aMonitor", 0x20200000, 0x20202000-1,
+		IORESOURCE_MEM)
+	/* Delta-Mu 1 RAM (~29.9MiB (32MiB - (2MiB + 8KiB))) */
+	PREALLOC_NORMAL("MediaMemory1", 0x20202000, 0x22000000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * Sysaudio Driver
 	 */
-	{
-		.name   = "DSP_Image_Buff",
-		.start  = 0x00000000,
-		.end    = 0x000FFFFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_CPU_PCM_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00009FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_AUX_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "ADSC_Main_Buff",
-		.start  = 0x00000000,
-		.end    = 0x00003FFF,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* DSP code and data images (1MiB) */
+	PREALLOC_NORMAL("DSP_Image_Buff", 0x00000000, 0x00100000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC CPU PCM buffer (40KiB) */
+	PREALLOC_NORMAL("ADSC_CPU_PCM_Buff", 0x00000000, 0x0000A000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC AUX buffer (16KiB) */
+	PREALLOC_NORMAL("ADSC_AUX_Buff", 0x00000000, 0x00004000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+	/* ADSC Main buffer (16KiB) */
+	PREALLOC_NORMAL("ADSC_Main_Buff", 0x00000000, 0x00004000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * STAVEM driver/STAPI
 	 */
-	{
-		.name   = "AVMEMPartition0",
-		.start  = 0x00000000,
-		.end    = 0x00600000 - 1,	/* 6 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 6MiB */
+	PREALLOC_NORMAL("AVMEMPartition0", 0x00000000, 0x00600000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * DOCSIS Subsystem
 	 */
-	{
-		.name   = "Docsis",
-		.start  = 0x40100000,
-		.end    = 0x407fffff,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 7MiB */
+	PREALLOC_DOCSIS("Docsis", 0x40100000, 0x40800000-1, IORESOURCE_MEM)
+
 	/*
 	 * GHW HAL Driver
 	 */
-	{
-		.name   = "GraphicsHeap",
-		.start  = 0x46900000,
-		.end    = 0x47700000 - 1,	/* 14 MB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* PowerTV Graphics Heap (14MiB) */
+	PREALLOC_NORMAL("GraphicsHeap", 0x46900000, 0x47700000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * multi com buffer area
 	 */
-	{
-		.name   = "MulticomSHM",
-		.start  = 0x47900000,
-		.end    = 0x47920000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 128KiB */
+	PREALLOC_NORMAL("MulticomSHM", 0x47900000, 0x47920000-1,
+		IORESOURCE_MEM)
+
 	/*
 	 * DMA Ring buffer
 	 */
-	{
-		.name   = "BMM_Buffer",
-		.start  = 0x00000000,
-		.end    = 0x00280000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 2.5MiB */
+	PREALLOC_NORMAL("BMM_Buffer", 0x00000000, 0x00280000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Display bins buffer for unit0
 	 */
-	{
-		.name   = "DisplayBins0",
-		.start  = 0x00000000,
-		.end    = 0x00000FFF,		/* 4 KB total */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 4KiB */
+	PREALLOC_NORMAL("DisplayBins0", 0x00000000, 0x00001000-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
-	 *
 	 * AVFS: player HAL memory
-	 *
-	 *
 	 */
-	{
-		.name   = "AvfsDmaMem",
-		.start  = 0x00000000,
-		.end    = 0x002c4c00 - 1,	/* 945K * 3 for playback */
-		.flags  = IORESOURCE_MEM,
-	},
+	/* 945K * 3 for playback */
+	PREALLOC_NORMAL("AvfsDmaMem", 0x00000000, 0x002c4c00-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * PMEM
 	 */
-	{
-		.name   = "DiagPersistentMemory",
-		.start  = 0x00000000,
-		.end    = 0x10000 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Persistent memory for diagnostics (64KiB) */
+	PREALLOC_PMEM("DiagPersistentMemory", 0x00000000, 0x10000-1,
+	     (IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Smartcard
 	 */
-	{
-		.name   = "SmartCardInfo",
-		.start  = 0x00000000,
-		.end    = 0x2800 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
+	/* Read and write buffers for Internal/External cards (10KiB) */
+	PREALLOC_NORMAL("SmartCardInfo", 0x00000000, 0x2800-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * NAND Flash
 	 */
-	{
-		.name   = "NandFlash",
-		.start  = NAND_FLASH_BASE,
-		.end    = NAND_FLASH_BASE + 0x400 - 1,
-		.flags  = IORESOURCE_IO,
-	},
+	/* 10KiB */
+	PREALLOC_NORMAL("NandFlash", NAND_FLASH_BASE, NAND_FLASH_BASE+0x400-1,
+		IORESOURCE_MEM)
+
+	/*
+	 * TFTPBuffer
+	 *
+	 *  This buffer is used in some minimal configurations (e.g. two-way
+	 *  loader) for storing software images
+	 */
+	PREALLOC_TFTP("TFTPBuffer", 0x00000000, MEBIBYTE(80)-1,
+		(IORESOURCE_MEM|IORESOURCE_PTV_RES_LOEXT))
+
 	/*
 	 * Add other resources here
 	 */
-	{ },
+
+	/*
+	 * End of Resource marker
+	 */
+	{
+		.flags  = 0,
+	},
 };
diff -druN linux-libre-2.6.34-gnu/arch/mips/sibyte/bcm1480/irq.c linux-libre-2.6.35-gnu/arch/mips/sibyte/bcm1480/irq.c
--- linux-libre-2.6.34-gnu/arch/mips/sibyte/bcm1480/irq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/sibyte/bcm1480/irq.c	2010-08-01 18:11:14.000000000 -0400
@@ -253,7 +253,7 @@
  * On the second cpu, everything is set to IP5, which is
  * ignored, EXCEPT the mailbox interrupt.  That one is
  * set to IP[2] so it is handled.  This is needed so we
- * can do cross-cpu function calls, as requred by SMP
+ * can do cross-cpu function calls, as required by SMP
  */
 
 #define IMR_IP2_VAL	K_BCM1480_INT_MAP_I0
diff -druN linux-libre-2.6.34-gnu/arch/mips/sibyte/sb1250/irq.c linux-libre-2.6.35-gnu/arch/mips/sibyte/sb1250/irq.c
--- linux-libre-2.6.34-gnu/arch/mips/sibyte/sb1250/irq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/sibyte/sb1250/irq.c	2010-08-01 18:11:14.000000000 -0400
@@ -236,7 +236,7 @@
  * On the second cpu, everything is set to IP5, which is
  * ignored, EXCEPT the mailbox interrupt.  That one is
  * set to IP[2] so it is handled.  This is needed so we
- * can do cross-cpu function calls, as requred by SMP
+ * can do cross-cpu function calls, as required by SMP
  */
 
 #define IMR_IP2_VAL	K_INT_MAP_I0
diff -druN linux-libre-2.6.34-gnu/arch/mips/sibyte/swarm/platform.c linux-libre-2.6.35-gnu/arch/mips/sibyte/swarm/platform.c
--- linux-libre-2.6.34-gnu/arch/mips/sibyte/swarm/platform.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/sibyte/swarm/platform.c	2010-08-01 18:11:14.000000000 -0400
@@ -83,3 +83,57 @@
 device_initcall(swarm_pata_init);
 
 #endif /* defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_LITTLESUR) */
+
+#define sb1250_dev_struct(num) \
+	static struct resource sb1250_res##num = {		\
+		.name = "SB1250 MAC " __stringify(num),		\
+		.flags = IORESOURCE_MEM,		\
+		.start = A_MAC_CHANNEL_BASE(num),	\
+		.end = A_MAC_CHANNEL_BASE(num + 1) -1,	\
+	};\
+	static struct platform_device sb1250_dev##num = {	\
+		.name = "sb1250-mac",			\
+	.id = num,					\
+	.resource = &sb1250_res##num,			\
+	.num_resources = 1,				\
+	}
+
+sb1250_dev_struct(0);
+sb1250_dev_struct(1);
+sb1250_dev_struct(2);
+sb1250_dev_struct(3);
+
+static struct platform_device *sb1250_devs[] __initdata = {
+	&sb1250_dev0,
+	&sb1250_dev1,
+	&sb1250_dev2,
+	&sb1250_dev3,
+};
+
+static int __init sb1250_device_init(void)
+{
+	int ret;
+
+	/* Set the number of available units based on the SOC type.  */
+	switch (soc_type) {
+	case K_SYS_SOC_TYPE_BCM1250:
+	case K_SYS_SOC_TYPE_BCM1250_ALT:
+		ret = platform_add_devices(sb1250_devs, 3);
+		break;
+	case K_SYS_SOC_TYPE_BCM1120:
+	case K_SYS_SOC_TYPE_BCM1125:
+	case K_SYS_SOC_TYPE_BCM1125H:
+	case K_SYS_SOC_TYPE_BCM1250_ALT2:       /* Hybrid */
+		ret = platform_add_devices(sb1250_devs, 2);
+		break;
+	case K_SYS_SOC_TYPE_BCM1x55:
+	case K_SYS_SOC_TYPE_BCM1x80:
+		ret = platform_add_devices(sb1250_devs, 4);
+		break;
+	default:
+		ret = -ENODEV;
+		break;
+	}
+	return ret;
+}
+device_initcall(sb1250_device_init);
diff -druN linux-libre-2.6.34-gnu/arch/mips/txx9/generic/setup.c linux-libre-2.6.35-gnu/arch/mips/txx9/generic/setup.c
--- linux-libre-2.6.34-gnu/arch/mips/txx9/generic/setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mips/txx9/generic/setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -905,7 +905,7 @@
 	void __iomem *base;
 };
 
-static ssize_t txx9_sram_read(struct kobject *kobj,
+static ssize_t txx9_sram_read(struct file *filp, struct kobject *kobj,
 			      struct bin_attribute *bin_attr,
 			      char *buf, loff_t pos, size_t size)
 {
@@ -920,7 +920,7 @@
 	return size;
 }
 
-static ssize_t txx9_sram_write(struct kobject *kobj,
+static ssize_t txx9_sram_write(struct file *filp, struct kobject *kobj,
 			       struct bin_attribute *bin_attr,
 			       char *buf, loff_t pos, size_t size)
 {
diff -druN linux-libre-2.6.34-gnu/arch/mn10300/include/asm/atomic.h linux-libre-2.6.35-gnu/arch/mn10300/include/asm/atomic.h
--- linux-libre-2.6.34-gnu/arch/mn10300/include/asm/atomic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mn10300/include/asm/atomic.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,157 +1 @@
-/* MN10300 Atomic counter operations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_ATOMIC_H
-#define _ASM_ATOMIC_H
-
-#ifdef CONFIG_SMP
-#error not SMP safe
-#endif
-
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- */
-
-#define ATOMIC_INIT(i)	{ (i) }
-
-#ifdef __KERNEL__
-
-/**
- * atomic_read - read atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically reads the value of @v.  Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-#define atomic_read(v)	((v)->counter)
-
-/**
- * atomic_set - set atomic variable
- * @v: pointer of type atomic_t
- * @i: required value
- *
- * Atomically sets the value of @v to @i.  Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-#define atomic_set(v, i) (((v)->counter) = (i))
-
-#include <asm/system.h>
-
-/**
- * atomic_add_return - add integer to atomic variable
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns the result
- * Note that the guaranteed useful range of an atomic_t is only 24 bits.
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int temp;
-
-	local_irq_save(flags);
-	temp = v->counter;
-	temp += i;
-	v->counter = temp;
-	local_irq_restore(flags);
-
-	return temp;
-}
-
-/**
- * atomic_sub_return - subtract integer from atomic variable
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v and returns the result
- * Note that the guaranteed useful range of an atomic_t is only 24 bits.
- */
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
-	unsigned long flags;
-	int temp;
-
-	local_irq_save(flags);
-	temp = v->counter;
-	temp -= i;
-	v->counter = temp;
-	local_irq_restore(flags);
-
-	return temp;
-}
-
-static inline int atomic_add_negative(int i, atomic_t *v)
-{
-	return atomic_add_return(i, v) < 0;
-}
-
-static inline void atomic_add(int i, atomic_t *v)
-{
-	atomic_add_return(i, v);
-}
-
-static inline void atomic_sub(int i, atomic_t *v)
-{
-	atomic_sub_return(i, v);
-}
-
-static inline void atomic_inc(atomic_t *v)
-{
-	atomic_add_return(1, v);
-}
-
-static inline void atomic_dec(atomic_t *v)
-{
-	atomic_sub_return(1, v);
-}
-
-#define atomic_dec_return(v)		atomic_sub_return(1, (v))
-#define atomic_inc_return(v)		atomic_add_return(1, (v))
-
-#define atomic_sub_and_test(i, v)	(atomic_sub_return((i), (v)) == 0)
-#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
-#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
-
-#define atomic_add_unless(v, a, u)				\
-({								\
-	int c, old;						\
-	c = atomic_read(v);					\
-	while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
-		c = old;					\
-	c != (u);						\
-})
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
-	unsigned long flags;
-
-	mask = ~mask;
-	local_irq_save(flags);
-	*addr &= mask;
-	local_irq_restore(flags);
-}
-
-#define atomic_xchg(ptr, v)		(xchg(&(ptr)->counter, (v)))
-#define atomic_cmpxchg(v, old, new)	(cmpxchg(&((v)->counter), (old), (new)))
-
-/* Atomic operations are already serializing on MN10300??? */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
-
-#include <asm-generic/atomic-long.h>
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_ATOMIC_H */
+#include <asm-generic/atomic.h>
diff -druN linux-libre-2.6.34-gnu/arch/mn10300/include/asm/cache.h linux-libre-2.6.35-gnu/arch/mn10300/include/asm/cache.h
--- linux-libre-2.6.34-gnu/arch/mn10300/include/asm/cache.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mn10300/include/asm/cache.h	2010-08-01 18:11:14.000000000 -0400
@@ -21,6 +21,8 @@
 #define L1_CACHE_DISPARITY	L1_CACHE_NENTRIES * L1_CACHE_BYTES
 #endif
 
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
 /* data cache purge registers
  * - read from the register to unconditionally purge that cache line
  * - write address & 0xffffff00 to conditionally purge that cache line
diff -druN linux-libre-2.6.34-gnu/arch/mn10300/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/mn10300/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/mn10300/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mn10300/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -11,45 +11,8 @@
 #ifndef _ASM_SCATTERLIST_H
 #define _ASM_SCATTERLIST_H
 
-#include <asm/types.h>
-
-/*
- * Drivers must set either ->address or (preferred) page and ->offset
- * to indicate where data must be transferred to/from.
- *
- * Using page is recommended since it handles highmem data as well as
- * low mem. ->address is restricted to data which has a virtual mapping, and
- * it will go away in the future. Updating to page can be automated very
- * easily -- something like
- *
- * sg->address = some_ptr;
- *
- * can be rewritten as
- *
- * sg_set_page(virt_to_page(some_ptr));
- * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
- *
- * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
- */
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;		/* for highmem, page offset */
-	dma_addr_t	dma_address;
-	unsigned int	length;
-};
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (0x00ffffff)
 
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->length)
-
 #endif /* _ASM_SCATTERLIST_H */
diff -druN linux-libre-2.6.34-gnu/arch/mn10300/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/mn10300/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/mn10300/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mn10300/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -148,7 +148,7 @@
 #define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE		17	/* OOM killer killed process */
+#define TIF_MEMDIE		17	/* is terminating due to OOM killer */
 #define TIF_FREEZE		18	/* freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	+(1 << TIF_SYSCALL_TRACE)
diff -druN linux-libre-2.6.34-gnu/arch/mn10300/Kconfig linux-libre-2.6.35-gnu/arch/mn10300/Kconfig
--- linux-libre-2.6.34-gnu/arch/mn10300/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mn10300/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -37,6 +37,9 @@
 config GENERIC_CALIBRATE_DELAY
 	def_bool y
 
+config GENERIC_CMOS_UPDATE
+        def_bool y
+
 config GENERIC_FIND_NEXT_BIT
 	def_bool y
 
diff -druN linux-libre-2.6.34-gnu/arch/mn10300/kernel/rtc.c linux-libre-2.6.35-gnu/arch/mn10300/kernel/rtc.c
--- linux-libre-2.6.34-gnu/arch/mn10300/kernel/rtc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mn10300/kernel/rtc.c	2010-08-01 18:11:14.000000000 -0400
@@ -26,17 +26,15 @@
 /* time for RTC to update itself in ioclks */
 static unsigned long mn10300_rtc_update_period;
 
-/*
- * read the current RTC time
- */
-unsigned long __init get_initial_rtc_time(void)
+void read_persistent_clock(struct timespec *ts)
 {
 	struct rtc_time tm;
 
 	get_rtc_time(&tm);
 
-	return mktime(tm.tm_year, tm.tm_mon, tm.tm_mday,
+	ts->tv_sec = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday,
 		      tm.tm_hour, tm.tm_min, tm.tm_sec);
+	ts->tv_nsec = 0;
 }
 
 /*
@@ -110,24 +108,9 @@
 	return retval;
 }
 
-void check_rtc_time(void)
+int update_persistent_clock(struct timespec now)
 {
-	/* the RTC clock just finished ticking over again this second
-	 * - if we have an externally synchronized Linux clock, then update
-	 *   RTC clock accordingly every ~11 minutes. set_rtc_mmss() has to be
-	 *   called as close as possible to 500 ms before the new second starts.
-	 */
-	if ((time_status & STA_UNSYNC) == 0 &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    xtime.tv_nsec / 1000 >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    xtime.tv_nsec / 1000 <= 500000 + ((unsigned) TICK_SIZE) / 2
-	    ) {
-		if (set_rtc_mmss(xtime.tv_sec) == 0)
-			last_rtc_update = xtime.tv_sec;
-		else
-			/* do it again in 60s */
-			last_rtc_update = xtime.tv_sec - 600;
-	}
+	return set_rtc_mms(now.tv_sec);
 }
 
 /*
diff -druN linux-libre-2.6.34-gnu/arch/mn10300/kernel/time.c linux-libre-2.6.35-gnu/arch/mn10300/kernel/time.c
--- linux-libre-2.6.34-gnu/arch/mn10300/kernel/time.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mn10300/kernel/time.c	2010-08-01 18:11:14.000000000 -0400
@@ -111,7 +111,6 @@
 		/* advance the kernel's time tracking system */
 		profile_tick(CPU_PROFILING);
 		do_timer(1);
-		check_rtc_time();
 	}
 
 	write_sequnlock(&xtime_lock);
@@ -139,9 +138,6 @@
 	       " (calibrated against RTC)\n",
 	       MN10300_TSCCLK / 1000000, (MN10300_TSCCLK / 10000) % 100);
 
-	xtime.tv_sec = get_initial_rtc_time();
-	xtime.tv_nsec = 0;
-
 	mn10300_last_tsc = TMTSCBC;
 
 	/* use timer 0 & 1 cascaded to tick at as close to HZ as possible */
diff -druN linux-libre-2.6.34-gnu/arch/mn10300/mm/fault.c linux-libre-2.6.35-gnu/arch/mn10300/mm/fault.c
--- linux-libre-2.6.34-gnu/arch/mn10300/mm/fault.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mn10300/mm/fault.c	2010-08-01 18:11:14.000000000 -0400
@@ -338,11 +338,10 @@
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	monitor_signal(regs);
-	printk(KERN_ALERT "VM: killing process %s\n", tsk->comm);
-	if ((fault_code & MMUFCR_xFC_ACCESS) == MMUFCR_xFC_ACCESS_USR)
-		do_exit(SIGKILL);
-	goto no_context;
+	if ((fault_code & MMUFCR_xFC_ACCESS) != MMUFCR_xFC_ACCESS_USR)
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
diff -druN linux-libre-2.6.34-gnu/arch/mn10300/unit-asb2305/pci-asb2305.c linux-libre-2.6.35-gnu/arch/mn10300/unit-asb2305/pci-asb2305.c
--- linux-libre-2.6.34-gnu/arch/mn10300/unit-asb2305/pci-asb2305.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/mn10300/unit-asb2305/pci-asb2305.c	2010-08-01 18:11:14.000000000 -0400
@@ -117,6 +117,7 @@
 					 * Invalidate the resource to prevent
 					 * child resource allocations in this
 					 * range. */
+					r->start = r->end = 0;
 					r->flags = 0;
 				}
 			}
diff -druN linux-libre-2.6.34-gnu/arch/parisc/include/asm/atomic.h linux-libre-2.6.35-gnu/arch/parisc/include/asm/atomic.h
--- linux-libre-2.6.34-gnu/arch/parisc/include/asm/atomic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/include/asm/atomic.h	2010-08-01 18:11:14.000000000 -0400
@@ -189,7 +189,7 @@
 
 static __inline__ int atomic_read(const atomic_t *v)
 {
-	return v->counter;
+	return (*(volatile int *)&(v)->counter);
 }
 
 /* exported interface */
@@ -286,7 +286,7 @@
 static __inline__ s64
 atomic64_read(const atomic64_t *v)
 {
-	return v->counter;
+	return (*(volatile long *)&(v)->counter);
 }
 
 #define atomic64_add(i,v)	((void)(__atomic64_add_return( ((s64)(i)),(v))))
diff -druN linux-libre-2.6.34-gnu/arch/parisc/include/asm/bug.h linux-libre-2.6.35-gnu/arch/parisc/include/asm/bug.h
--- linux-libre-2.6.34-gnu/arch/parisc/include/asm/bug.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/include/asm/bug.h	2010-08-01 18:11:14.000000000 -0400
@@ -44,7 +44,7 @@
 #endif
 
 #ifdef CONFIG_DEBUG_BUGVERBOSE
-#define __WARN()							\
+#define __WARN_TAINT(taint)						\
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
@@ -54,11 +54,11 @@
 			     "\t.org 2b+%c3\n"				\
 			     "\t.popsection"				\
 			     : : "i" (__FILE__), "i" (__LINE__),	\
-			     "i" (BUGFLAG_WARNING),			\
+			     "i" (BUGFLAG_TAINT(taint)), 		\
 			     "i" (sizeof(struct bug_entry)) );		\
 	} while(0)
 #else
-#define __WARN()							\
+#define __WARN_TAINT(taint)						\
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
@@ -67,7 +67,7 @@
 			     "\t.short %c0\n"				\
 			     "\t.org 2b+%c1\n"				\
 			     "\t.popsection"				\
-			     : : "i" (BUGFLAG_WARNING),			\
+			     : : "i" (BUGFLAG_TAINT(taint)),		\
 			     "i" (sizeof(struct bug_entry)) );		\
 	} while(0)
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/parisc/include/asm/cacheflush.h linux-libre-2.6.35-gnu/arch/parisc/include/asm/cacheflush.h
--- linux-libre-2.6.34-gnu/arch/parisc/include/asm/cacheflush.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/include/asm/cacheflush.h	2010-08-01 18:11:14.000000000 -0400
@@ -2,6 +2,7 @@
 #define _PARISC_CACHEFLUSH_H
 
 #include <linux/mm.h>
+#include <linux/uaccess.h>
 
 /* The usual comment is "Caches aren't brain-dead on the <architecture>".
  * Unfortunately, that doesn't apply to PA-RISC. */
@@ -125,11 +126,20 @@
 
 #define kunmap(page)			kunmap_parisc(page_address(page))
 
-#define kmap_atomic(page, idx)		page_address(page)
+static inline void *kmap_atomic(struct page *page, enum km_type idx)
+{
+	pagefault_disable();
+	return page_address(page);
+}
 
-#define kunmap_atomic(addr, idx)	kunmap_parisc(addr)
+static inline void kunmap_atomic(void *addr, enum km_type idx)
+{
+	kunmap_parisc(addr);
+	pagefault_enable();
+}
 
-#define kmap_atomic_pfn(pfn, idx)	page_address(pfn_to_page(pfn))
+#define kmap_atomic_prot(page, idx, prot)	kmap_atomic(page, idx)
+#define kmap_atomic_pfn(pfn, idx)	kmap_atomic(pfn_to_page(pfn), (idx))
 #define kmap_atomic_to_page(ptr)	virt_to_page(ptr)
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/parisc/include/asm/cache.h linux-libre-2.6.35-gnu/arch/parisc/include/asm/cache.h
--- linux-libre-2.6.34-gnu/arch/parisc/include/asm/cache.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/include/asm/cache.h	2010-08-01 18:11:14.000000000 -0400
@@ -28,7 +28,7 @@
 
 #define SMP_CACHE_BYTES L1_CACHE_BYTES
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
 void parisc_cache_init(void);	/* initializes cache-flushing */
 void disable_sr_hashing_asm(int); /* low level support for above */
diff -druN linux-libre-2.6.34-gnu/arch/parisc/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/parisc/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/parisc/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -3,25 +3,9 @@
 
 #include <asm/page.h>
 #include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-
-	unsigned int length;
-
-	/* an IOVA can be 64-bits on some PA-Risc platforms. */
-	dma_addr_t iova;	/* I/O Virtual Address */
-	__u32      iova_length; /* bytes mapped */
-};
-
-#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg))
-#define sg_dma_address(sg) ((sg)->iova)
-#define sg_dma_len(sg)     ((sg)->iova_length)
+#include <asm-generic/scatterlist.h>
 
 #define ISA_DMA_THRESHOLD (~0UL)
+#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg))
 
 #endif /* _ASM_PARISC_SCATTERLIST_H */
diff -druN linux-libre-2.6.34-gnu/arch/parisc/include/asm/system.h linux-libre-2.6.35-gnu/arch/parisc/include/asm/system.h
--- linux-libre-2.6.34-gnu/arch/parisc/include/asm/system.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/include/asm/system.h	2010-08-01 18:11:14.000000000 -0400
@@ -174,7 +174,7 @@
 })
 
 #ifdef CONFIG_SMP
-# define __lock_aligned __attribute__((__section__(".data.lock_aligned")))
+# define __lock_aligned __attribute__((__section__(".data..lock_aligned")))
 #endif
 
 #define arch_align_stack(x) (x)
diff -druN linux-libre-2.6.34-gnu/arch/parisc/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/parisc/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/parisc/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -56,7 +56,7 @@
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_32BIT               4       /* 32 bit binary */
-#define TIF_MEMDIE		5
+#define TIF_MEMDIE		5	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	6	/* restore saved signal mask */
 #define TIF_FREEZE		7	/* is freezing for suspend */
 #define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
diff -druN linux-libre-2.6.34-gnu/arch/parisc/Kconfig linux-libre-2.6.35-gnu/arch/parisc/Kconfig
--- linux-libre-2.6.34-gnu/arch/parisc/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,6 +98,9 @@
 config NEED_DMA_MAP_STATE
 	def_bool y
 
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
 config ISA_DMA_API
 	bool
 
diff -druN linux-libre-2.6.34-gnu/arch/parisc/kernel/asm-offsets.c linux-libre-2.6.35-gnu/arch/parisc/kernel/asm-offsets.c
--- linux-libre-2.6.34-gnu/arch/parisc/kernel/asm-offsets.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/kernel/asm-offsets.c	2010-08-01 18:11:14.000000000 -0400
@@ -45,8 +45,12 @@
 #else
 #define FRAME_SIZE	64
 #endif
+#define FRAME_ALIGN	64
 
-#define align(x,y) (((x)+FRAME_SIZE+(y)-1) - (((x)+(y)-1)%(y)))
+/* Add FRAME_SIZE to the size x and align it to y. All definitions
+ * that use align_frame will include space for a frame.
+ */
+#define align_frame(x,y) (((x)+FRAME_SIZE+(y)-1) - (((x)+(y)-1)%(y)))
 
 int main(void)
 {
@@ -146,7 +150,8 @@
 	DEFINE(TASK_PT_IOR, offsetof(struct task_struct, thread.regs.ior));
 	BLANK();
 	DEFINE(TASK_SZ, sizeof(struct task_struct));
-	DEFINE(TASK_SZ_ALGN, align(sizeof(struct task_struct), 64));
+	/* TASK_SZ_ALGN includes space for a stack frame. */
+	DEFINE(TASK_SZ_ALGN, align_frame(sizeof(struct task_struct), FRAME_ALIGN));
 	BLANK();
 	DEFINE(PT_PSW, offsetof(struct pt_regs, gr[ 0]));
 	DEFINE(PT_GR1, offsetof(struct pt_regs, gr[ 1]));
@@ -233,7 +238,8 @@
 	DEFINE(PT_ISR, offsetof(struct pt_regs, isr));
 	DEFINE(PT_IOR, offsetof(struct pt_regs, ior));
 	DEFINE(PT_SIZE, sizeof(struct pt_regs));
-	DEFINE(PT_SZ_ALGN, align(sizeof(struct pt_regs), 64));
+	/* PT_SZ_ALGN includes space for a stack frame. */
+	DEFINE(PT_SZ_ALGN, align_frame(sizeof(struct pt_regs), FRAME_ALIGN));
 	BLANK();
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
@@ -242,7 +248,8 @@
 	DEFINE(TI_SEGMENT, offsetof(struct thread_info, addr_limit));
 	DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
 	DEFINE(THREAD_SZ, sizeof(struct thread_info));
-	DEFINE(THREAD_SZ_ALGN, align(sizeof(struct thread_info), 64));
+	/* THREAD_SZ_ALGN includes space for a stack frame. */
+	DEFINE(THREAD_SZ_ALGN, align_frame(sizeof(struct thread_info), FRAME_ALIGN));
 	BLANK();
 	DEFINE(ICACHE_BASE, offsetof(struct pdc_cache_info, ic_base));
 	DEFINE(ICACHE_STRIDE, offsetof(struct pdc_cache_info, ic_stride));
diff -druN linux-libre-2.6.34-gnu/arch/parisc/kernel/entry.S linux-libre-2.6.35-gnu/arch/parisc/kernel/entry.S
--- linux-libre-2.6.34-gnu/arch/parisc/kernel/entry.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/kernel/entry.S	2010-08-01 18:11:14.000000000 -0400
@@ -364,32 +364,6 @@
 	.align		32
 	.endm
 
-	/* The following are simple 32 vs 64 bit instruction
-	 * abstractions for the macros */
-	.macro		EXTR	reg1,start,length,reg2
-#ifdef CONFIG_64BIT
-	extrd,u		\reg1,32+(\start),\length,\reg2
-#else
-	extrw,u		\reg1,\start,\length,\reg2
-#endif
-	.endm
-
-	.macro		DEP	reg1,start,length,reg2
-#ifdef CONFIG_64BIT
-	depd		\reg1,32+(\start),\length,\reg2
-#else
-	depw		\reg1,\start,\length,\reg2
-#endif
-	.endm
-
-	.macro		DEPI	val,start,length,reg
-#ifdef CONFIG_64BIT
-	depdi		\val,32+(\start),\length,\reg
-#else
-	depwi		\val,\start,\length,\reg
-#endif
-	.endm
-
 	/* In LP64, the space contains part of the upper 32 bits of the
 	 * fault.  We have to extract this and place it in the va,
 	 * zeroing the corresponding bits in the space register */
@@ -442,19 +416,19 @@
 	 */
 	.macro		L2_ptep	pmd,pte,index,va,fault
 #if PT_NLEVELS == 3
-	EXTR		\va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index
+	extru		\va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index
 #else
-	EXTR		\va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index
+	extru		\va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index
 #endif
-	DEP             %r0,31,PAGE_SHIFT,\pmd  /* clear offset */
+	dep             %r0,31,PAGE_SHIFT,\pmd  /* clear offset */
 	copy		%r0,\pte
 	ldw,s		\index(\pmd),\pmd
 	bb,>=,n		\pmd,_PxD_PRESENT_BIT,\fault
-	DEP		%r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
+	dep		%r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
 	copy		\pmd,%r9
 	SHLREG		%r9,PxD_VALUE_SHIFT,\pmd
-	EXTR		\va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index
-	DEP		%r0,31,PAGE_SHIFT,\pmd  /* clear offset */
+	extru		\va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index
+	dep		%r0,31,PAGE_SHIFT,\pmd  /* clear offset */
 	shladd		\index,BITS_PER_PTE_ENTRY,\pmd,\pmd
 	LDREG		%r0(\pmd),\pte		/* pmd is now pte */
 	bb,>=,n		\pte,_PAGE_PRESENT_BIT,\fault
@@ -605,7 +579,7 @@
 	depdi		0,31,32,\tmp
 #endif
 	copy		\va,\tmp1
-	DEPI		0,31,23,\tmp1
+	depi		0,31,23,\tmp1
 	cmpb,COND(<>),n	\tmp,\tmp1,\fault
 	ldi		(_PAGE_DIRTY|_PAGE_WRITE|_PAGE_READ),\prot
 	depd,z		\prot,8,7,\prot
@@ -997,13 +971,6 @@
 
 	rfi
 	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
 
 #ifndef CONFIG_PREEMPT
 # define intr_do_preempt	intr_restore
@@ -2076,9 +2043,10 @@
 	LDREG	TASK_PT_GR31(%r1),%r31	   /* restore syscall rp */
 
 	/* NOTE: We use rsm/ssm pair to make this operation atomic */
+	LDREG   TASK_PT_GR30(%r1),%r1              /* Get user sp */
 	rsm     PSW_SM_I, %r0
-	LDREG   TASK_PT_GR30(%r1),%r30             /* restore user sp */
-	mfsp	%sr3,%r1			   /* Get users space id */
+	copy    %r1,%r30                           /* Restore user sp */
+	mfsp    %sr3,%r1                           /* Get user space id */
 	mtsp    %r1,%sr7                           /* Restore sr7 */
 	ssm     PSW_SM_I, %r0
 
diff -druN linux-libre-2.6.34-gnu/arch/parisc/kernel/head.S linux-libre-2.6.35-gnu/arch/parisc/kernel/head.S
--- linux-libre-2.6.34-gnu/arch/parisc/kernel/head.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/kernel/head.S	2010-08-01 18:11:14.000000000 -0400
@@ -345,7 +345,7 @@
 ENDPROC(stext)
 
 #ifndef CONFIG_64BIT
-	.section .data.read_mostly
+	.section .data..read_mostly
 
 	.align	4
 	.export	$global$,data
diff -druN linux-libre-2.6.34-gnu/arch/parisc/kernel/init_task.c linux-libre-2.6.35-gnu/arch/parisc/kernel/init_task.c
--- linux-libre-2.6.34-gnu/arch/parisc/kernel/init_task.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/kernel/init_task.c	2010-08-01 18:11:14.000000000 -0400
@@ -53,11 +53,11 @@
  * guarantee that global objects will be laid out in memory in the same order 
  * as the order of declaration, so put these in different sections and use
  * the linker script to order them. */
-pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data.vm0.pmd"), aligned(PAGE_SIZE)));
+pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data..vm0.pmd"), aligned(PAGE_SIZE)));
 #endif
 
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data.vm0.pgd"), aligned(PAGE_SIZE)));
-pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data.vm0.pte"), aligned(PAGE_SIZE)));
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data..vm0.pgd"), aligned(PAGE_SIZE)));
+pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data..vm0.pte"), aligned(PAGE_SIZE)));
 
 /*
  * Initial task structure.
diff -druN linux-libre-2.6.34-gnu/arch/parisc/kernel/syscall.S linux-libre-2.6.35-gnu/arch/parisc/kernel/syscall.S
--- linux-libre-2.6.34-gnu/arch/parisc/kernel/syscall.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/kernel/syscall.S	2010-08-01 18:11:14.000000000 -0400
@@ -47,18 +47,17 @@
 	KILL_INSN
 	.endr
 
-	/* ADDRESS 0xb0 to 0xb4, lws uses 1 insns for entry */
+	/* ADDRESS 0xb0 to 0xb8, lws uses two insns for entry */
 	/* Light-weight-syscall entry must always be located at 0xb0 */
 	/* WARNING: Keep this number updated with table size changes */
 #define __NR_lws_entries (2)
 
 lws_entry:
-	/* Unconditional branch to lws_start, located on the 
-	   same gateway page */
-	b,n	lws_start
+	gate	lws_start, %r0		/* increase privilege */
+	depi	3, 31, 2, %r31		/* Ensure we return into user mode. */
 
-	/* Fill from 0xb4 to 0xe0 */
-	.rept 11
+	/* Fill from 0xb8 to 0xe0 */
+	.rept 10
 	KILL_INSN
 	.endr
 
@@ -423,9 +422,6 @@
 
 	*********************************************************/
 lws_start:
-	/* Gate and ensure we return to userspace */
-	gate	.+8, %r0
-	depi	3, 31, 2, %r31	/* Ensure we return to userspace */
 
 #ifdef CONFIG_64BIT
 	/* FIXME: If we are a 64-bit kernel just
@@ -442,7 +438,7 @@
 #endif	
 
         /* Is the lws entry number valid? */
-	comiclr,>>=	__NR_lws_entries, %r20, %r0
+	comiclr,>>	__NR_lws_entries, %r20, %r0
 	b,n	lws_exit_nosys
 
 	/* WARNING: Trashing sr2 and sr3 */
@@ -473,7 +469,7 @@
 	/* now reset the lowest bit of sp if it was set */
 	xor	%r30,%r1,%r30
 #endif
-	be,n	0(%sr3, %r31)
+	be,n	0(%sr7, %r31)
 
 
 	
@@ -529,7 +525,6 @@
 #endif
 
 lws_compare_and_swap:
-#ifdef CONFIG_SMP
 	/* Load start of lock table */
 	ldil	L%lws_lock_start, %r20
 	ldo	R%lws_lock_start(%r20), %r28
@@ -572,8 +567,6 @@
 	ldo	2(%r0), %r28				/* 2nd case */
 	b	lws_exit				/* Contended... */
 	ldo	-EAGAIN(%r0), %r21			/* Spin in userspace */
-#endif
-/* CONFIG_SMP */
 
 	/*
 		prev = *addr;
@@ -601,13 +594,11 @@
 1:	ldw	0(%sr3,%r26), %r28
 	sub,<>	%r28, %r25, %r0
 2:	stw	%r24, 0(%sr3,%r26)
-#ifdef CONFIG_SMP
 	/* Free lock */
 	stw	%r20, 0(%sr2,%r20)
-# if ENABLE_LWS_DEBUG
+#if ENABLE_LWS_DEBUG
 	/* Clear thread register indicator */
 	stw	%r0, 4(%sr2,%r20)
-# endif
 #endif
 	/* Return to userspace, set no error */
 	b	lws_exit
@@ -615,12 +606,10 @@
 
 3:		
 	/* Error occured on load or store */
-#ifdef CONFIG_SMP
 	/* Free lock */
 	stw	%r20, 0(%sr2,%r20)
-# if ENABLE_LWS_DEBUG
+#if ENABLE_LWS_DEBUG
 	stw	%r0, 4(%sr2,%r20)
-# endif
 #endif
 	b	lws_exit
 	ldo	-EFAULT(%r0),%r21	/* set errno */
@@ -672,7 +661,6 @@
 END(sys_call_table64)
 #endif
 
-#ifdef CONFIG_SMP
 	/*
 		All light-weight-syscall atomic operations 
 		will use this set of locks 
@@ -694,8 +682,6 @@
 	.endr
 END(lws_lock_start)
 	.previous
-#endif
-/* CONFIG_SMP for lws_lock_start */
 
 .end
 
diff -druN linux-libre-2.6.34-gnu/arch/parisc/kernel/vmlinux.lds.S linux-libre-2.6.35-gnu/arch/parisc/kernel/vmlinux.lds.S
--- linux-libre-2.6.34-gnu/arch/parisc/kernel/vmlinux.lds.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/kernel/vmlinux.lds.S	2010-08-01 18:11:14.000000000 -0400
@@ -94,8 +94,8 @@
 
 	/* PA-RISC locks requires 16-byte alignment */
 	. = ALIGN(16);
-	.data.lock_aligned : {
-		*(.data.lock_aligned)
+	.data..lock_aligned : {
+		*(.data..lock_aligned)
 	}
 
 	/* End of data section */
@@ -105,10 +105,10 @@
 	__bss_start = .;
 	/* page table entries need to be PAGE_SIZE aligned */
 	. = ALIGN(PAGE_SIZE);
-	.data.vmpages : {
-		*(.data.vm0.pmd)
-		*(.data.vm0.pgd)
-		*(.data.vm0.pte)
+	.data..vmpages : {
+		*(.data..vm0.pmd)
+		*(.data..vm0.pgd)
+		*(.data..vm0.pte)
 	}
 	.bss : {
 		*(.bss)
diff -druN linux-libre-2.6.34-gnu/arch/parisc/math-emu/decode_exc.c linux-libre-2.6.35-gnu/arch/parisc/math-emu/decode_exc.c
--- linux-libre-2.6.34-gnu/arch/parisc/math-emu/decode_exc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/math-emu/decode_exc.c	2010-08-01 18:11:14.000000000 -0400
@@ -342,6 +342,7 @@
 		return SIGNALCODE(SIGFPE, FPE_FLTINV);
 	  case DIVISIONBYZEROEXCEPTION:
 		update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
+		Clear_excp_register(exception_index);
 	  	return SIGNALCODE(SIGFPE, FPE_FLTDIV);
 	  case INEXACTEXCEPTION:
 		update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
diff -druN linux-libre-2.6.34-gnu/arch/parisc/mm/fault.c linux-libre-2.6.35-gnu/arch/parisc/mm/fault.c
--- linux-libre-2.6.34-gnu/arch/parisc/mm/fault.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/parisc/mm/fault.c	2010-08-01 18:11:14.000000000 -0400
@@ -264,8 +264,7 @@
 
   out_of_memory:
 	up_read(&mm->mmap_sem);
-	printk(KERN_CRIT "VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	goto no_context;
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
 }
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/4xx.c linux-libre-2.6.35-gnu/arch/powerpc/boot/4xx.c
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/4xx.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/4xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -519,7 +519,7 @@
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0);
 
-	/* serial clocks beed fixup based on int/ext */
+	/* serial clocks need fixup based on int/ext */
 	eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk);
@@ -532,7 +532,7 @@
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
 
-	/* serial clocks beed fixup based on int/ext */
+	/* serial clocks need fixup based on int/ext */
 	eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk);
 	eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk);
 }
@@ -543,10 +543,10 @@
 {
 	unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
 
-	/* serial clocks beed fixup based on int/ext */
-	eplike_fixup_uart_clk(0, "/plb/opb/serial@10000200", ser_clk, plb_clk);
-	eplike_fixup_uart_clk(1, "/plb/opb/serial@10000300", ser_clk, plb_clk);
-	eplike_fixup_uart_clk(2, "/plb/opb/serial@10000600", ser_clk, plb_clk);
+	/* serial clocks need fixup based on int/ext */
+	eplike_fixup_uart_clk(0, "/plb/opb/serial@f0000200", ser_clk, plb_clk);
+	eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk);
+	eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk);
 }
 
 void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/addRamDisk.c linux-libre-2.6.35-gnu/arch/powerpc/boot/addRamDisk.c
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/addRamDisk.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/addRamDisk.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,311 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <netinet/in.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <elf.h>
-
-#define ElfHeaderSize  (64 * 1024)
-#define ElfPages  (ElfHeaderSize / 4096)
-#define KERNELBASE (0xc000000000000000)
-#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
-
-struct addr_range {
-	unsigned long long addr;
-	unsigned long memsize;
-	unsigned long offset;
-};
-
-static int check_elf64(void *p, int size, struct addr_range *r)
-{
-	Elf64_Ehdr *elf64 = p;
-	Elf64_Phdr *elf64ph;
-
-	if (elf64->e_ident[EI_MAG0] != ELFMAG0 ||
-	    elf64->e_ident[EI_MAG1] != ELFMAG1 ||
-	    elf64->e_ident[EI_MAG2] != ELFMAG2 ||
-	    elf64->e_ident[EI_MAG3] != ELFMAG3 ||
-	    elf64->e_ident[EI_CLASS] != ELFCLASS64 ||
-	    elf64->e_ident[EI_DATA] != ELFDATA2MSB ||
-	    elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64)
-		return 0;
-
-	if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size)
-		return 0;
-
-	elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 +
-				  (unsigned long)elf64->e_phoff);
-
-	r->memsize = (unsigned long)elf64ph->p_memsz;
-	r->offset = (unsigned long)elf64ph->p_offset;
-	r->addr = (unsigned long long)elf64ph->p_vaddr;
-
-#ifdef DEBUG
-	printf("PPC64 ELF file, ph:\n");
-	printf("p_type   0x%08x\n", elf64ph->p_type);
-	printf("p_flags  0x%08x\n", elf64ph->p_flags);
-	printf("p_offset 0x%016llx\n", elf64ph->p_offset);
-	printf("p_vaddr  0x%016llx\n", elf64ph->p_vaddr);
-	printf("p_paddr  0x%016llx\n", elf64ph->p_paddr);
-	printf("p_filesz 0x%016llx\n", elf64ph->p_filesz);
-	printf("p_memsz  0x%016llx\n", elf64ph->p_memsz);
-	printf("p_align  0x%016llx\n", elf64ph->p_align);
-	printf("... skipping 0x%08lx bytes of ELF header\n",
-	       (unsigned long)elf64ph->p_offset);
-#endif
-
-	return 64;
-}
-static void get4k(FILE *file, char *buf )
-{
-	unsigned j;
-	unsigned num = fread(buf, 1, 4096, file);
-	for ( j=num; j<4096; ++j )
-		buf[j] = 0;
-}
-
-static void put4k(FILE *file, char *buf )
-{
-	fwrite(buf, 1, 4096, file);
-}
-
-static void death(const char *msg, FILE *fdesc, const char *fname)
-{
-	fprintf(stderr, msg);
-	fclose(fdesc);
-	unlink(fname);
-	exit(1);
-}
-
-int main(int argc, char **argv)
-{
-	char inbuf[4096];
-	struct addr_range vmlinux;
-	FILE *ramDisk;
-	FILE *inputVmlinux;
-	FILE *outputVmlinux;
-
-	char *rd_name, *lx_name, *out_name;
-
-	size_t i;
-	unsigned long ramFileLen;
-	unsigned long ramLen;
-	unsigned long roundR;
-	unsigned long offset_end;
-
-	unsigned long kernelLen;
-	unsigned long actualKernelLen;
-	unsigned long round;
-	unsigned long roundedKernelLen;
-	unsigned long ramStartOffs;
-	unsigned long ramPages;
-	unsigned long roundedKernelPages;
-	unsigned long hvReleaseData;
-	u_int32_t eyeCatcher = 0xc8a5d9c4;
-	unsigned long naca;
-	unsigned long xRamDisk;
-	unsigned long xRamDiskSize;
-	long padPages;
-  
-  
-	if (argc < 2) {
-		fprintf(stderr, "Name of RAM disk file missing.\n");
-		exit(1);
-	}
-	rd_name = argv[1];
-
-	if (argc < 3) {
-		fprintf(stderr, "Name of vmlinux file missing.\n");
-		exit(1);
-	}
-	lx_name = argv[2];
-
-	if (argc < 4) {
-		fprintf(stderr, "Name of vmlinux output file missing.\n");
-		exit(1);
-	}
-	out_name = argv[3];
-
-
-	ramDisk = fopen(rd_name, "r");
-	if ( ! ramDisk ) {
-		fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name);
-		exit(1);
-	}
-
-	inputVmlinux = fopen(lx_name, "r");
-	if ( ! inputVmlinux ) {
-		fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name);
-		exit(1);
-	}
-  
-	outputVmlinux = fopen(out_name, "w+");
-	if ( ! outputVmlinux ) {
-		fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name);
-		exit(1);
-	}
-
-	i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux);
-	if (i != sizeof(inbuf)) {
-		fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i);
-		exit(1);
-	}
-
-	i = check_elf64(inbuf, sizeof(inbuf), &vmlinux);
-	if (i == 0) {
-		fprintf(stderr, "You must have a linux kernel specified as argv[2]\n");
-		exit(1);
-	}
-
-	/* Input Vmlinux file */
-	fseek(inputVmlinux, 0, SEEK_END);
-	kernelLen = ftell(inputVmlinux);
-	fseek(inputVmlinux, 0, SEEK_SET);
-	printf("kernel file size = %lu\n", kernelLen);
-
-	actualKernelLen = kernelLen - ElfHeaderSize;
-
-	printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen);
-
-	round = actualKernelLen % 4096;
-	roundedKernelLen = actualKernelLen;
-	if ( round )
-		roundedKernelLen += (4096 - round);
-	printf("Vmlinux length rounded up to a 4k multiple = %ld/0x%lx \n", roundedKernelLen, roundedKernelLen);
-	roundedKernelPages = roundedKernelLen / 4096;
-	printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages);
-
-	offset_end = _ALIGN_UP(vmlinux.memsize, 4096);
-	/* calc how many pages we need to insert between the vmlinux and the start of the ram disk */
-	padPages = offset_end/4096 - roundedKernelPages;
-
-	/* Check and see if the vmlinux is already larger than _end in System.map */
-	if (padPages < 0) {
-		/* vmlinux is larger than _end - adjust the offset to the start of the embedded ram disk */ 
-		offset_end = roundedKernelLen;
-		printf("vmlinux is larger than _end indicates it needs to be - offset_end = %lx \n", offset_end);
-		padPages = 0;
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-	else {
-		/* _end is larger than vmlinux - use the offset to _end that we calculated from the system map */
-		printf("vmlinux is smaller than _end indicates is needed - offset_end = %lx \n", offset_end);
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-
-
-
-	/* Input Ram Disk file */
-	// Set the offset that the ram disk will be started at.
-	ramStartOffs = offset_end;  /* determined from the input vmlinux file and the system map */
-	printf("Ram Disk will start at offset = 0x%lx \n", ramStartOffs);
-  
-	fseek(ramDisk, 0, SEEK_END);
-	ramFileLen = ftell(ramDisk);
-	fseek(ramDisk, 0, SEEK_SET);
-	printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen);
-
-	ramLen = ramFileLen;
-
-	roundR = 4096 - (ramLen % 4096);
-	if ( roundR ) {
-		printf("Rounding RAM disk file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR);
-		ramLen += roundR;
-	}
-
-	printf("Rounded RAM disk size is %ld/0x%lx \n", ramLen, ramLen);
-	ramPages = ramLen / 4096;
-	printf("RAM disk pages to copy = %ld/0x%lx\n", ramPages, ramPages);
-
-
-
-  // Copy 64K ELF header
-	for (i=0; i<(ElfPages); ++i) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Copy the vmlinux (as full pages). */
-	fseek(inputVmlinux, ElfHeaderSize, SEEK_SET);
-	for ( i=0; i<roundedKernelPages; ++i ) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-  
-	/* Insert pad pages (if appropriate) that are needed between */
-	/* | the end of the vmlinux and the ram disk. */
-	for (i=0; i<padPages; ++i) {
-		memset(inbuf, 0, 4096);
-		put4k(outputVmlinux, inbuf);
-	}
-
-	/* Copy the ram disk (as full pages). */
-	for ( i=0; i<ramPages; ++i ) {
-		get4k( ramDisk, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Close the input files */
-	fclose(ramDisk);
-	fclose(inputVmlinux);
-	/* And flush the written output file */
-	fflush(outputVmlinux);
-
-
-
-	/* Fixup the new vmlinux to contain the ram disk starting offset (xRamDisk) and the ram disk size (xRamDiskSize) */
-	/* fseek to the hvReleaseData pointer */
-	fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET);
-	if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name);
-	}
-	hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */
-	printf("hvReleaseData is at %08lx\n", hvReleaseData);
-
-	/* fseek to the hvReleaseData */
-	fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET);
-	if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData\n", outputVmlinux, out_name);
-	}
-	/* Check hvReleaseData sanity */
-	if (memcmp(inbuf, &eyeCatcher, 4) != 0) {
-		death("hvReleaseData is invalid\n", outputVmlinux, out_name);
-	}
-	/* Get the naca pointer */
-	naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE;
-	printf("Naca is at offset 0x%lx \n", naca);
-
-	/* fseek to the naca */
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not read naca\n", outputVmlinux, out_name);
-	}
-	xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c]));
-	xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14]));
-	/* Make sure a RAM disk isn't already present */
-	if ((xRamDisk != 0) || (xRamDiskSize != 0)) {
-		death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name);
-	}
-	/* Fill in the values */
-	*((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs);
-	*((u_int32_t *) &inbuf[0x14]) = htonl(ramPages);
-
-	/* Write out the new naca */
-	fflush(outputVmlinux);
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not write naca\n", outputVmlinux, out_name);
-	}
-	printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n",
-	       ramPages, ramStartOffs);
-
-	/* Done */
-	fclose(outputVmlinux);
-	/* Set permission to executable */
-	chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH);
-
-	return 0;
-}
-
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/icon.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/icon.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/icon.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/icon.dts	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,447 @@
+/*
+ * Device Tree Source for Mosaix Technologies, Inc. ICON board
+ *
+ * Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "mosaixtech,icon";
+	compatible = "mosaixtech,icon";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440SPe";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-440spe","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440spe";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440spe";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	MQ0: mq {
+		compatible = "ibm,mq-440spe";
+		dcr-reg = <0x040 0x020>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/*        addr-child     addr-parent    size */
+		ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000
+			  0x4 0x00200000 0x4 0x00200000 0x00000400
+			  0x4 0xe0000000 0x4 0xe0000000 0x20000000
+			  0xc 0x00000000 0xc 0x00000000 0x20000000
+			  0xd 0x00000000 0xd 0x00000000 0x80000000
+			  0xd 0x80000000 0xd 0x80000000 0x80000000
+			  0xe 0x00000000 0xe 0x00000000 0x80000000
+			  0xe 0x80000000 0xe 0x80000000 0x80000000
+			  0xf 0x00000000 0xf 0x00000000 0x80000000
+			  0xf 0x80000000 0xf 0x80000000 0x80000000>;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <2>;
+			num-rx-chans = <1>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x5 0x1>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x01000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x00b60000>;
+					};
+					partition@f60000 {
+						label = "env";
+						reg = <0x00f60000 0x00040000>;
+					};
+					partition@fa0000 {
+						label = "u-boot";
+						reg = <0x00fa0000 0x00060000>;
+					};
+				};
+
+				SysACE_CompactFlash: sysace@1,0 {
+					compatible = "xlnx,sysace";
+					interrupt-parent = <&UIC2>;
+					interrupts = <24 0x4>;
+					reg = <0x00000001 0x00000000 0x10000>;
+				};
+			};
+
+			UART0: serial@f0000200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@f0000300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+
+			UART2: serial@f0000600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xf0000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x5 0x4>;
+			};
+
+			IIC0: i2c@f0000400 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+			};
+
+			IIC1: i2c@f0000500 {
+				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
+				reg = <0xf0000500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+                                rtc@68 {
+                                        compatible = "stm,m41t00";
+                                        reg = <0x68>;
+                                };
+			};
+
+			EMAC0: ethernet@f0000800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-440spe", "ibm,emac4";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xf0000800 0x00000074>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "gmii";
+				phy-map = <0x00000000>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <0x0000000c 0x0ec00000 0x00000008   /* Config space access */
+			       0x00000000 0x00000000 0x00000000   /* no IACK cycles */
+			       0x0000000c 0x0ed00000 0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100   /* Internal registers */
+			       0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 4GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+			/* This drives busses 0x20 to 0x2f */
+			bus-range = <0x20 0x2f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		I2O: i2o@400100000 {
+			compatible = "ibm,i2o-440spe";
+			reg = <0x00000004 0x00100000 0x100>;
+			dcr-reg = <0x060 0x020>;
+		};
+
+		DMA0: dma0@400100100 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <0>;
+			reg = <0x00000004 0x00100100 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA0>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x14 4
+				1 &UIC1 0x16 4>;
+		};
+
+		DMA1: dma1@400100200 {
+			compatible = "ibm,dma-440spe";
+			cell-index = <1>;
+			reg = <0x00000004 0x00100200 0x100>;
+			dcr-reg = <0x060 0x020>;
+			interrupt-parent = <&DMA1>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x16 4
+				1 &UIC1 0x16 4>;
+		};
+
+		xor-accel@400200000 {
+			compatible = "amcc,xor-accelerator";
+			reg = <0x00000004 0x00200000 0x400>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x1f 4>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@f0000200";
+	};
+};
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/iss4xx.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/iss4xx.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/iss4xx.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/iss4xx.dts	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,116 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ *    Copyright (c) 2006, 2007 IBM Corp.
+ *    Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "ibm,iss-4xx";
+	compatible = "ibm,iss-4xx";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <0x00000000>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>; // may need fixup in sim
+			d-cache-line-size = <32>; // may need fixup in sim
+			i-cache-size = <32768>; /* may need fixup in sim */
+			d-cache-size = <32768>; /* may need fixup in sim */
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-4xx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-4xx", "ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	plb {
+		compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; // Filled in by zImage
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full 32-bit
+			   range */
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			clock-frequency = <0>; // Filled in by zImage
+			UART0: serial@40000200 {
+				device_type = "serial";
+				compatible = "ns16550a";
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+		};
+	};
+
+	nvrtc {
+		compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+		reg = <0 0xEF703000 0x2000>;
+	};
+	iss-block {
+		compatible = "ibm,iss-sim-block-device";
+		reg = <0 0xEF701000 0x1000>;
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@40000200";
+	};
+};
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/iss4xx-mpic.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/iss4xx-mpic.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/iss4xx-mpic.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/iss4xx-mpic.dts	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,155 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ *     Copyright (c) 2006, 2007 IBM Corp.
+ *     Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "ibm,iss-4xx";
+	compatible = "ibm,iss-4xx";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <0>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "ok";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <1>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x01f00100>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <2>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x01f00200>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			model = "PowerPC,4xx"; // real CPU changed in sim
+			reg = <3>;
+			clock-frequency = <100000000>; // 100Mhz :-)
+			timebase-frequency = <100000000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x01f00300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg =  <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
+
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00030000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+
+	};
+
+	plb {
+		compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; // Filled in by zImage
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full 32-bit
+			   range */
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			clock-frequency = <0>; // Filled in by zImage
+			UART0: serial@40000200 {
+				device_type = "serial";
+				compatible = "ns16550a";
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <0x0 0x2>;
+			};
+		};
+	};
+
+	nvrtc {
+		compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
+		reg = <0 0xEF703000 0x2000>;
+	};
+	iss-block {
+		compatible = "ibm,iss-sim-block-device";
+		reg = <0 0xEF701000 0x1000>;
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@40000200";
+	};
+};
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/katmai.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/katmai.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/katmai.dts	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/katmai.dts	2010-08-01 18:11:14.000000000 -0400
@@ -44,6 +44,7 @@
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
+			reset-type = <2>;	/* Use chip-reset */
 		};
 	};
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/lite5200b.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/lite5200b.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/lite5200b.dts	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/lite5200b.dts	2010-08-01 18:11:14.000000000 -0400
@@ -259,6 +259,11 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
 
 		sram@8000 {
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/lite5200.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/lite5200.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/lite5200.dts	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/lite5200.dts	2010-08-01 18:11:14.000000000 -0400
@@ -134,12 +134,16 @@
 			compatible = "fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
 			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		gpio@c00 {
 			compatible = "fsl,mpc5200-gpio-wkup";
 			reg = <0xc00 0x40>;
 			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		spi@f00 {
@@ -230,8 +234,8 @@
 			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
 
-			phy0: ethernet-phy@1 {
-				reg = <1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
 			};
 		};
 
@@ -255,7 +259,13 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
+
 		sram@8000 {
 			compatible = "fsl,mpc5200-sram";
 			reg = <0x8000 0x4000>;
@@ -281,4 +291,18 @@
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff000000 0x01000000>;
+
+		flash@0,0 {
+			compatible = "amd,am29lv652d", "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+		};
+	};
 };
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8315erdb.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8315erdb.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8315erdb.dts	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8315erdb.dts	2010-08-01 18:11:14.000000000 -0400
@@ -292,7 +292,7 @@
 			fsl,num-channels = <4>;
 			fsl,channel-fifo-len = <24>;
 			fsl,exec-units-mask = <0x97c>;
-			fsl,descriptor-types-mask = <0x3ab0abf>;
+			fsl,descriptor-types-mask = <0x3a30abf>;
 		};
 
 		sata@18000 {
@@ -463,4 +463,18 @@
 				  0 0x00800000>;
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "ide-disk";
+		};
+	};
 };
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8377_rdb.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8377_rdb.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8377_rdb.dts	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8377_rdb.dts	2010-08-01 18:11:14.000000000 -0400
@@ -486,4 +486,18 @@
 				  0 0x00800000>;
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "ide-disk";
+		};
+	};
 };
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8378_rdb.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8378_rdb.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8378_rdb.dts	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8378_rdb.dts	2010-08-01 18:11:14.000000000 -0400
@@ -470,4 +470,18 @@
 				  0 0x00800000>;
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "ide-disk";
+		};
+	};
 };
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8379_rdb.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8379_rdb.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8379_rdb.dts	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8379_rdb.dts	2010-08-01 18:11:14.000000000 -0400
@@ -436,4 +436,18 @@
 		compatible = "fsl,mpc8349-pci";
 		device_type = "pci";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			gpios = <&mcu_pio 0 0>;
+			default-state = "on";
+		};
+
+		hdd {
+			gpios = <&mcu_pio 1 0>;
+			linux,default-trigger = "ide-disk";
+		};
+	};
 };
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8548cds.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8548cds.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8548cds.dts	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8548cds.dts	2010-08-01 18:11:14.000000000 -0400
@@ -20,10 +20,8 @@
 	aliases {
 		ethernet0 = &enet0;
 		ethernet1 = &enet1;
-/*
 		ethernet2 = &enet2;
 		ethernet3 = &enet3;
-*/
 		serial0 = &serial0;
 		serial1 = &serial1;
 		pci0 = &pci0;
@@ -254,7 +252,6 @@
 			};
 		};
 
-/* eTSEC 3/4 are currently broken
 		enet2: ethernet@26000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -310,7 +307,6 @@
 				};
 			};
 		};
- */
 
 		serial0: serial@4500 {
 			cell-index = <0>;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts	2010-08-01 18:11:14.000000000 -0400
@@ -215,6 +215,18 @@
 			clock-frequency = <0>;
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x80>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0>;
+			interrupt-parent = <&mpic>;
+		};
+
 		global-utilities@e0000 {	//global utilities block
 			compatible = "fsl,mpc8572-guts";
 			reg = <0xe0000 0x1000>;
@@ -243,8 +255,7 @@
 			protected-sources = <
 			31 32 33 37 38 39       /* enet2 enet3 */
 			76 77 78 79 26 42	/* dma2 pci2 serial*/
-			0xe0 0xe1 0xe2 0xe3     /* msi */
-			0xe4 0xe5 0xe6 0xe7
+			0xe4 0xe5 0xe6 0xe7	/* msi */
 			>;
 		};
 	};
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts	2010-08-01 18:11:14.000000000 -0400
@@ -154,12 +154,8 @@
 		msi@41600 {
 			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
 			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
+			msi-available-ranges = <0x80 0x80>;
 			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
 				0xe4 0
 				0xe5 0
 				0xe6 0
@@ -190,6 +186,7 @@
 			0x1 0x2 0x3 0x4         /* pci slot */
 			0x9 0xa 0xb 0xc         /* usb */
 			0x6 0x7 0xe 0x5         /* Audio elgacy SATA */
+			0xe0 0xe1 0xe2 0xe3	/* msi */
 			>;
 		};
 	};
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/p1020rdb.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/p1020rdb.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/p1020rdb.dts	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/p1020rdb.dts	2010-08-01 18:11:14.000000000 -0400
@@ -19,6 +19,9 @@
 	aliases {
 		serial0 = &serial0;
 		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
 		pci0 = &pci0;
 		pci1 = &pci1;
 	};
@@ -346,6 +349,122 @@
 			};
 		};
 
+		mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1>;
+				reg = <0x0>;
+			};
+
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+			};
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-tbi";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@b0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@b1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		enet2: ethernet@b2000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+
+			queue-group@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb2000 0x1000>;
+				interrupts = <31 2 32 2 33 2>;
+			};
+
+			queue-group@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xb6000 0x1000>;
+				interrupts = <25 2 26 2 27 2>;
+			};
+		};
+
 		usb@22000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -356,6 +475,11 @@
 			phy_type = "ulpi";
 		};
 
+		/* USB2 is shared with localbus, so it must be disabled
+		   by default. We can't put 'status = "disabled";' here
+		   since U-Boot doesn't clear the status property when
+		   it enables USB2. OTOH, U-Boot does create a new node
+		   when there isn't any. So, just comment it out.
 		usb@23000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -365,6 +489,7 @@
 			interrupts = <46 0x2>;
 			phy_type = "ulpi";
 		};
+		*/
 
 		sdhci@2e000 {
 			compatible = "fsl,p1020-esdhc", "fsl,esdhc";
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/p1021mds.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/p1021mds.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/p1021mds.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/p1021mds.dts	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,698 @@
+/*
+ * P1021 MDS Device Tree Source
+ *
+ * Copyright 2010 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P1021";
+	compatible = "fsl,P1021MDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P1021@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P1021@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		/* NAND Flash, BCSR, PMC0/1*/
+		ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
+			  0x1 0x0 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0x0 0xf8010000 0x00020000
+			  0x3 0x0 0x0 0xf8020000 0x00020000>;
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x0 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 5MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00500000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@b00000 {
+				/* 6MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00600000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 14MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00e00000>;
+				label = "NAND (RW) Writable User area";
+			};
+
+			partition@1f00000 {
+				/* 1MB for microcode */
+				reg = <0x01f00000 0x00100000>;
+				label = "NAND (RO) QE Ucode";
+				read-only;
+			};
+		};
+
+		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p1021mds-bcsr";
+			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+		};
+
+		pib@2,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <2 0 0x10000>;
+		};
+
+		pib@3,0 {
+			compatible = "fsl,p1021mds-pib";
+			reg = <3 0 0x10000>;
+		};
+	};
+
+	soc@ffe00000 {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p1021-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p1021-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <16 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p1021-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			espi,num-ss-bits = <4>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				spi-max-frequency = <40000000>; /* input clock */
+				partition@u-boot {
+					label = "u-boot-spi";
+					reg = <0x00000000 0x00100000>;
+					read-only;
+				};
+				partition@kernel {
+					label = "kernel-spi";
+					reg = <0x00100000 0x00500000>;
+					read-only;
+				};
+				partition@dtb {
+					label = "dtb-spi";
+					reg = <0x00600000 0x00100000>;
+					read-only;
+				};
+				partition@fs {
+					label = "file system-spi";
+					reg = <0x00700000 0x00900000>;
+				};
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p1021-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>; // L2,256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		 mdio@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-mdio";
+			reg = <0x24000 0x1000 0xb0030 0x4>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1>;
+				reg = <0x0>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				reg = <0x4>;
+			};
+		};
+
+		mdio@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,etsec2-tbi";
+			reg = <0x25000 0x1000 0xb1030 0x4>;
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@B0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB0000 0x1000>;
+				interrupts = <29 2 30 2 34 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB4000 0x1000>;
+				interrupts = <17 2 18 2 24 2>;
+			};
+		};
+
+		enet1: ethernet@B1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "sgmii";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB1000 0x1000>;
+				interrupts = <35 2 36 2 40 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB5000 0x1000>;
+				interrupts = <51 2 52 2 67 2>;
+			};
+		};
+
+		enet2: ethernet@B2000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "fsl,etsec2";
+			fsl,num_rx_queues = <0x8>;
+			fsl,num_tx_queues = <0x8>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+			queue-group@0{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB2000 0x1000>;
+				interrupts = <31 2 32 2 33 2>;
+			};
+			queue-group@1{
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xB6000 0x1000>;
+				interrupts = <25 2 26 2 27 2>;
+			};
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p1021-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.3", "fsl,sec3.1",
+				     "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3a30abf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p1021-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p1021-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		par_io@e0100 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xe0100 0x60>;
+			ranges = <0x0 0xe0100 0x60>;
+			device_type = "par_io";
+			num-ports = <3>;
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+					0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9
+*/
+					0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+					0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+					0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+					0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+					0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+					0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+					0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+					0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+					0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+					0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+					0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+			};
+
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+					0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+					0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+					0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+					0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+					0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+					0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+					0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+					0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+					0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+			};
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <16 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe@ffe80000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
+
+		qeic: interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			interrupts = <63 2 60 2>; //high:47 low:44
+			interrupt-parent = <&mpic>;
+		};
+
+		enet3: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <1>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			qe_phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1>;
+				reg = <0x0>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy1: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <5>;
+			reg = <0x2400 0x200>;
+			interrupts = <40>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+
+		muram@10000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x10000 0x6000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+				"fsl,cpm-muram-data";
+				reg = <0x0 0x6000>;
+			};
+		};
+	};
+};
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/redwood.dts linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/redwood.dts
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/dts/redwood.dts	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/dts/redwood.dts	2010-08-01 18:11:14.000000000 -0400
@@ -234,10 +234,132 @@
 				has-inverted-stacr-oc;
 				has-new-stacr-staopc;
 			};
+		};
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x10 0x1f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x20 0x2f>;
 
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
+		};
+
+		PCIE2: pciex@d40000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 10 to 0x1f */
+			bus-range = <0x30 0x3f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 
 	};
+
 	chosen {
 		linux,stdout-path = "/plb/opb/serial@ef600200";
 	};
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/Makefile linux-libre-2.6.35-gnu/arch/powerpc/boot/Makefile
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -44,6 +44,7 @@
 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
 
 
@@ -77,7 +78,7 @@
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
 		cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
-		gamecube-head.S gamecube.c wii-head.S wii.c
+		gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -140,7 +141,7 @@
 $(obj)/wrapper.a: $(obj-wlib) FORCE
 	$(call if_changed,bootar)
 
-hostprogs-y	:= addnote addRamDisk hack-coff mktree
+hostprogs-y	:= addnote hack-coff mktree
 
 targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
@@ -169,7 +170,7 @@
 		$(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
 
 image-$(CONFIG_PPC_PSERIES)		+= zImage.pseries
-image-$(CONFIG_PPC_MAPLE)		+= zImage.pseries
+image-$(CONFIG_PPC_MAPLE)		+= zImage.maple
 image-$(CONFIG_PPC_IBM_CELL_BLADE)	+= zImage.pseries
 image-$(CONFIG_PPC_PS3)			+= dtbImage.ps3
 image-$(CONFIG_PPC_CELLEB)		+= zImage.pseries
@@ -206,6 +207,8 @@
 image-$(CONFIG_KATMAI)			+= cuImage.katmai
 image-$(CONFIG_WARP)			+= cuImage.warp
 image-$(CONFIG_YOSEMITE)		+= cuImage.yosemite
+image-$(CONFIG_ISS4xx)			+= treeImage.iss4xx \
+					   treeImage.iss4xx-mpic
 
 # Board ports in arch/powerpc/platform/8xx/Kconfig
 image-$(CONFIG_MPC86XADS)		+= cuImage.mpc866ads
@@ -351,7 +354,7 @@
 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
 	zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
 	zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
-	simpleImage.* otheros.bld *.dtb
+	zImage.maple simpleImage.* otheros.bld *.dtb
 
 # clean up files cached by wrapper
 clean-kernel := vmlinux.strip vmlinux.bin
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/treeboot-iss4xx.c linux-libre-2.6.35-gnu/arch/powerpc/boot/treeboot-iss4xx.c
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/treeboot-iss4xx.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/treeboot-iss4xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
+ *
+ * Based on earlier code:
+ *   Copyright (C) Paul Mackerras 1997.
+ *
+ *   Matt Porter <mporter@kernel.crashing.org>
+ *   Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *   Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ *    Copyright 2007 David Gibson, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "io.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "libfdt.h"
+
+BSS_STACK(4096);
+
+static void iss_4xx_fixups(void)
+{
+	ibm4xx_sdram_fixup_memsize();
+}
+
+#define SPRN_PIR	0x11E	/* Processor Indentification Register */
+void platform_init(void)
+{
+	unsigned long end_of_ram = 0x08000000;
+	unsigned long avail_ram = end_of_ram - (unsigned long)_end;
+	u32 pir_reg;
+
+	simple_alloc_init(_end, avail_ram, 128, 64);
+	platform_ops.fixups = iss_4xx_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	pir_reg = mfspr(SPRN_PIR);
+	fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/boot/wrapper linux-libre-2.6.35-gnu/arch/powerpc/boot/wrapper
--- linux-libre-2.6.34-gnu/arch/powerpc/boot/wrapper	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/boot/wrapper	2010-08-01 18:11:14.000000000 -0400
@@ -149,6 +149,10 @@
     platformo=$object/of.o
     link_address='0x4000000'
     ;;
+maple)
+    platformo=$object/of.o
+    link_address='0x400000'
+    ;;
 pmac|chrp)
     platformo=$object/of.o
     ;;
@@ -237,6 +241,9 @@
     link_address='0x600000'
     platformo="$object/$platform-head.o $object/$platform.o"
     ;;
+treeboot-iss4xx-mpic)
+    platformo="$object/treeboot-iss4xx.o"
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -321,7 +328,7 @@
 
 # post-processing needed for some platforms
 case "$platform" in
-pseries|chrp)
+pseries|chrp|maple)
     $objbin/addnote "$ofile"
     ;;
 coff)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/acadia_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/acadia_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/acadia_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/acadia_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/ep405_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/ep405_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/ep405_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/ep405_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/hcu4_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/hcu4_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/hcu4_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/hcu4_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/kilauea_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/kilauea_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/kilauea_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/kilauea_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/makalu_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/makalu_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/makalu_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/makalu_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/virtex_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/virtex_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/virtex_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/virtex_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -77,8 +77,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/walnut_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/walnut_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/40x/walnut_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/40x/walnut_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/arches_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/arches_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/arches_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/arches_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/bamboo_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/bamboo_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/bamboo_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/bamboo_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -102,8 +102,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/canyonlands_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/canyonlands_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/canyonlands_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/canyonlands_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/ebony_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/ebony_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/ebony_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/ebony_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -101,8 +101,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/eiger_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/eiger_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/eiger_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/eiger_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/icon_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/icon_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/icon_defconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/icon_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,1451 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.34-rc7
+# Fri May 21 17:40:22 2010
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=4
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=2
+CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_ICON=y
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_440SPe=y
+CONFIG_STDBINUTILS=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_ARCH_HAS_NMI_WATCHDOG is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XILINX_SYSACE=y
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_FUSION=y
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=y
+CONFIG_FUSION_LOGGING=y
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+# CONFIG_MOUSE_PS2_SYNAPTICS is not set
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_BOOTCOUNT is not set
+# CONFIG_DISPLAY_PDSP1880 is not set
+# CONFIG_MUCMC52_IO is not set
+# CONFIG_UC101_IO is not set
+# CONFIG_SRAM is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SM501=y
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/iss476-smp_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/iss476-smp_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/iss476-smp_defconfig	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/iss476-smp_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,1026 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33
+# Thu Mar  4 11:50:12 2010
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+# CONFIG_NOT_COHERENT_CACHE is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_PPC_47x=y
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_EIGER is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_ISS4xx=y
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+# CONFIG_PPC44x_SIMPLE is not set
+# CONFIG_PPC4xx_GPIO is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_OF_RTC=y
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="root=/dev/issblk0"
+CONFIG_EXTRA_TARGETS=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_PPC_EARLY_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+CONFIG_PPC_EARLY_DEBUG_44x=y
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+# CONFIG_PPC_EARLY_DEBUG_USBGECKO is not set
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x40000200
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/katmai_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/katmai_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/katmai_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/katmai_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -97,8 +97,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/rainier_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/rainier_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/rainier_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/rainier_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -101,8 +101,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/redwood_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/redwood_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/redwood_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/redwood_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/sam440ep_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/sam440ep_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/sam440ep_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/sam440ep_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -103,8 +103,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/sequoia_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/sequoia_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/sequoia_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/sequoia_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -102,8 +102,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/taishan_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/taishan_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/taishan_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/taishan_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -101,8 +101,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/virtex5_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/virtex5_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/44x/virtex5_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/44x/virtex5_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -80,8 +80,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/52xx/cm5200_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/52xx/cm5200_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/52xx/cm5200_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/52xx/cm5200_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -95,8 +95,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/52xx/lite5200b_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/52xx/lite5200b_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/52xx/lite5200b_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/52xx/lite5200b_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -96,8 +96,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/52xx/motionpro_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/52xx/motionpro_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/52xx/motionpro_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/52xx/motionpro_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -95,8 +95,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/52xx/pcm030_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/52xx/pcm030_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/52xx/pcm030_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/52xx/pcm030_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/52xx/tqm5200_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/52xx/tqm5200_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/52xx/tqm5200_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/52xx/tqm5200_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -95,8 +95,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/86xx/gef_ppc9a_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/86xx/gef_ppc9a_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/86xx/gef_ppc9a_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -103,8 +103,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/86xx/gef_sbc310_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/86xx/gef_sbc310_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/86xx/gef_sbc310_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/86xx/gef_sbc310_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -103,8 +103,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/86xx/gef_sbc610_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/86xx/gef_sbc610_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/86xx/gef_sbc610_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/86xx/gef_sbc610_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -103,8 +103,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -103,8 +103,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/86xx/sbc8641d_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/86xx/sbc8641d_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/86xx/sbc8641d_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/86xx/sbc8641d_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -102,8 +102,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/adder875_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/adder875_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/adder875_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/adder875_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -92,8 +92,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/amigaone_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/amigaone_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/amigaone_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/amigaone_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -87,8 +87,7 @@
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/c2k_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/c2k_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/c2k_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/c2k_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -102,8 +102,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/cell_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/cell_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/cell_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/cell_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -83,8 +83,7 @@
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/celleb_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/celleb_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/celleb_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/celleb_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -78,8 +78,7 @@
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_USER_SCHED is not set
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/chrp32_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/chrp32_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/chrp32_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/chrp32_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -77,8 +77,7 @@
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/ep8248e_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/ep8248e_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/ep8248e_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/ep8248e_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -96,8 +96,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/ep88xc_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/ep88xc_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/ep88xc_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/ep88xc_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -91,8 +91,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/g5_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/g5_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/g5_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/g5_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -82,8 +82,7 @@
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/gamecube_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/gamecube_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/gamecube_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/gamecube_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -101,8 +101,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/holly_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/holly_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/holly_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/holly_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -73,7 +73,6 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/iseries_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/iseries_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/iseries_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/iseries_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -81,8 +81,7 @@
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/linkstation_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/linkstation_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/linkstation_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/linkstation_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -97,8 +97,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/maple_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/maple_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/maple_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/maple_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -78,8 +78,7 @@
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/mgcoge_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/mgcoge_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/mgcoge_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/mgcoge_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -96,8 +96,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/mgsuvd_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/mgsuvd_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/mgsuvd_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/mgsuvd_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -90,8 +90,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/mpc512x_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/mpc512x_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/mpc512x_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/mpc512x_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -97,8 +97,7 @@
 CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/mpc5200_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/mpc5200_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/mpc5200_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/mpc5200_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -97,8 +97,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/mpc7448_hpc2_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/mpc7448_hpc2_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/mpc7448_hpc2_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/mpc7448_hpc2_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -95,8 +95,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/pasemi_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/pasemi_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/pasemi_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/pasemi_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/pmac32_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/pmac32_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/pmac32_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/pmac32_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -93,8 +93,7 @@
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/ppc40x_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/ppc40x_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/ppc40x_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/ppc40x_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -99,8 +99,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/ppc44x_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/ppc44x_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/ppc44x_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/ppc44x_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -103,8 +103,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/ppc64_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/ppc64_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/ppc64_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/ppc64_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -93,8 +93,7 @@
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -988,7 +987,7 @@
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000E=m
+CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/ppc64e_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/ppc64e_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/ppc64e_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/ppc64e_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -107,8 +107,7 @@
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/pq2fads_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/pq2fads_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/pq2fads_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/pq2fads_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -96,8 +96,7 @@
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/prpmc2800_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/prpmc2800_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/prpmc2800_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/prpmc2800_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -98,8 +98,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/pseries_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/pseries_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/pseries_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/pseries_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -92,8 +92,7 @@
 # CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUP_CPUACCT=y
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
@@ -804,7 +803,7 @@
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000E=m
+CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/storcenter_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/storcenter_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/storcenter_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/storcenter_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -95,8 +95,7 @@
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/configs/wii_defconfig linux-libre-2.6.35-gnu/arch/powerpc/configs/wii_defconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/configs/wii_defconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/configs/wii_defconfig	2010-08-01 18:11:14.000000000 -0400
@@ -102,8 +102,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/abs_addr.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/abs_addr.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/abs_addr.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/abs_addr.h	2010-08-01 18:11:14.000000000 -0400
@@ -12,7 +12,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/types.h>
 #include <asm/page.h>
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/asm-compat.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/asm-compat.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/asm-compat.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/asm-compat.h	2010-08-01 18:11:14.000000000 -0400
@@ -21,6 +21,7 @@
 /* operations for longs and pointers */
 #define PPC_LL		stringify_in_c(ld)
 #define PPC_STL		stringify_in_c(std)
+#define PPC_STLU	stringify_in_c(stdu)
 #define PPC_LCMPI	stringify_in_c(cmpdi)
 #define PPC_LONG	stringify_in_c(.llong)
 #define PPC_LONG_ALIGN	stringify_in_c(.balign 8)
@@ -44,6 +45,7 @@
 /* operations for longs and pointers */
 #define PPC_LL		stringify_in_c(lwz)
 #define PPC_STL		stringify_in_c(stw)
+#define PPC_STLU	stringify_in_c(stwu)
 #define PPC_LCMPI	stringify_in_c(cmpwi)
 #define PPC_LONG	stringify_in_c(.long)
 #define PPC_LONG_ALIGN	stringify_in_c(.balign 4)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/bug.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/bug.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/bug.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/bug.h	2010-08-01 18:11:14.000000000 -0400
@@ -85,12 +85,12 @@
 	}							\
 } while (0)
 
-#define __WARN() do {						\
+#define __WARN_TAINT(taint) do {				\
 	__asm__ __volatile__(					\
 		"1:	twi 31,0,0\n"				\
 		_EMIT_BUG_ENTRY					\
 		: : "i" (__FILE__), "i" (__LINE__),		\
-		  "i" (BUGFLAG_WARNING),			\
+		  "i" (BUGFLAG_TAINT(taint)),			\
 		  "i" (sizeof(struct bug_entry)));		\
 } while (0)
 
@@ -104,7 +104,7 @@
 		"1:	"PPC_TLNEI"	%4,0\n"			\
 		_EMIT_BUG_ENTRY					\
 		: : "i" (__FILE__), "i" (__LINE__),		\
-		  "i" (BUGFLAG_WARNING),			\
+		  "i" (BUGFLAG_TAINT(TAINT_WARN)),		\
 		  "i" (sizeof(struct bug_entry)),		\
 		  "r" (__ret_warn_on));				\
 	}							\
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/cache.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/cache.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/cache.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/cache.h	2010-08-01 18:11:14.000000000 -0400
@@ -12,8 +12,12 @@
 #define L1_CACHE_SHIFT		6
 #define MAX_COPY_PREFETCH	4
 #elif defined(CONFIG_PPC32)
-#define L1_CACHE_SHIFT		5
 #define MAX_COPY_PREFETCH	4
+#if defined(CONFIG_PPC_47x)
+#define L1_CACHE_SHIFT		7
+#else
+#define L1_CACHE_SHIFT		5
+#endif
 #else /* CONFIG_PPC64 */
 #define L1_CACHE_SHIFT		7
 #endif
@@ -38,7 +42,7 @@
 #endif /* __powerpc64__ && ! __ASSEMBLY__ */
 
 #if !defined(__ASSEMBLY__)
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
 #endif
 
 #endif /* __KERNEL__ */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/cpm1.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/cpm1.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/cpm1.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/cpm1.h	2010-08-01 18:11:14.000000000 -0400
@@ -17,6 +17,7 @@
 #ifndef __CPM1__
 #define __CPM1__
 
+#include <linux/init.h>
 #include <asm/8xx_immap.h>
 #include <asm/ptrace.h>
 #include <asm/cpm.h>
@@ -54,7 +55,7 @@
 
 extern void cpm_setbrg(uint brg, uint rate);
 
-extern void cpm_load_patch(cpm8xx_t *cp);
+extern void __init cpm_load_patch(cpm8xx_t *cp);
 
 extern void cpm_reset(void);
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/cpm.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/cpm.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/cpm.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/cpm.h	2010-08-01 18:11:14.000000000 -0400
@@ -7,6 +7,30 @@
 #include <linux/of.h>
 
 /*
+ * SPI Parameter RAM common to QE and CPM.
+ */
+struct spi_pram {
+	__be16	rbase;	/* Rx Buffer descriptor base address */
+	__be16	tbase;	/* Tx Buffer descriptor base address */
+	u8	rfcr;	/* Rx function code */
+	u8	tfcr;	/* Tx function code */
+	__be16	mrblr;	/* Max receive buffer length */
+	__be32	rstate;	/* Internal */
+	__be32	rdp;	/* Internal */
+	__be16	rbptr;	/* Internal */
+	__be16	rbc;	/* Internal */
+	__be32	rxtmp;	/* Internal */
+	__be32	tstate;	/* Internal */
+	__be32	tdp;	/* Internal */
+	__be16	tbptr;	/* Internal */
+	__be16	tbc;	/* Internal */
+	__be32	txtmp;	/* Internal */
+	__be32	res;	/* Tx temp. */
+	__be16  rpbase;	/* Relocation pointer (CPM1 only) */
+	__be16	res1;	/* Reserved */
+};
+
+/*
  * USB Controller pram common to QE and CPM.
  */
 struct usb_ctlr {
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/cputable.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/cputable.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/cputable.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/cputable.h	2010-08-01 18:11:14.000000000 -0400
@@ -70,8 +70,10 @@
 extern int machine_check_generic(struct pt_regs *regs);
 extern int machine_check_4xx(struct pt_regs *regs);
 extern int machine_check_440A(struct pt_regs *regs);
+extern int machine_check_e500mc(struct pt_regs *regs);
 extern int machine_check_e500(struct pt_regs *regs);
 extern int machine_check_e200(struct pt_regs *regs);
+extern int machine_check_47x(struct pt_regs *regs);
 
 /* NOTE WELL: Update identify_cpu() if fields are added or removed! */
 struct cpu_spec {
@@ -365,6 +367,7 @@
 #define CPU_FTRS_44X	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
 #define CPU_FTRS_440x6	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE | \
 	    CPU_FTR_INDEXED_DCR)
+#define CPU_FTRS_47X	(CPU_FTRS_440x6)
 #define CPU_FTRS_E200	(CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
 	    CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
 	    CPU_FTR_UNIFIED_ID_CACHE | CPU_FTR_NOEXECUTE)
@@ -453,6 +456,9 @@
 #ifdef CONFIG_44x
 	    CPU_FTRS_44X | CPU_FTRS_440x6 |
 #endif
+#ifdef CONFIG_PPC_47x
+	    CPU_FTRS_47X |
+#endif
 #ifdef CONFIG_E200
 	    CPU_FTRS_E200 |
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/device.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/device.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/device.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/device.h	2010-08-01 18:11:14.000000000 -0400
@@ -10,9 +10,6 @@
 struct device_node;
 
 struct dev_archdata {
-	/* Optional pointer to an OF device node */
-	struct device_node	*of_node;
-
 	/* DMA operations on that device */
 	struct dma_map_ops	*dma_ops;
 
@@ -30,19 +27,8 @@
 #endif
 };
 
-static inline void dev_archdata_set_node(struct dev_archdata *ad,
-					 struct device_node *np)
-{
-	ad->of_node = np;
-}
-
-static inline struct device_node *
-dev_archdata_get_node(const struct dev_archdata *ad)
-{
-	return ad->of_node;
-}
-
 struct pdev_archdata {
+	u64 dma_mask;
 };
 
 #endif /* _ASM_POWERPC_DEVICE_H */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/hvcall.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/hvcall.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/hvcall.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/hvcall.h	2010-08-01 18:11:14.000000000 -0400
@@ -228,6 +228,7 @@
 #define H_JOIN			0x298
 #define H_VASI_STATE            0x2A4
 #define H_ENABLE_CRQ		0x2B0
+#define H_GET_EM_PARMS		0x2B8
 #define H_SET_MPP		0x2D0
 #define H_GET_MPP		0x2D4
 #define MAX_HCALL_OPCODE	H_GET_MPP
@@ -281,6 +282,7 @@
  */
 #define PLPAR_HCALL9_BUFSIZE 9
 long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
+long plpar_hcall9_raw(unsigned long opcode, unsigned long *retbuf, ...);
 
 /* For hcall instrumentation.  One structure per-hcall, per-CPU */
 struct hcall_stats {
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/irq.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/irq.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/irq.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/irq.h	2010-08-01 18:11:14.000000000 -0400
@@ -358,7 +358,6 @@
 #define exc_lvl_ctx_init()
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 /*
  * Per-cpu stacks for handling hard and soft interrupts.
  */
@@ -369,11 +368,6 @@
 extern void call_do_softirq(struct thread_info *tp);
 extern int call_handle_irq(int irq, void *p1,
 			   struct thread_info *tp, void *func);
-#else
-#define irq_ctx_init()
-
-#endif /* CONFIG_IRQSTACKS */
-
 extern void do_IRQ(struct pt_regs *regs);
 
 #endif /* _ASM_IRQ_H */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kdump.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kdump.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kdump.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kdump.h	2010-08-01 18:11:14.000000000 -0400
@@ -3,8 +3,17 @@
 
 #include <asm/page.h>
 
-/* Kdump kernel runs at 32 MB, change at your peril. */
+/*
+ * If CONFIG_RELOCATABLE is enabled we can place the kdump kernel anywhere.
+ * To keep enough space in the RMO for the first stage kernel on 64bit, we
+ * place it at 64MB. If CONFIG_RELOCATABLE is not enabled we must place
+ * the second stage at 32MB.
+ */
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC64)
+#define KDUMP_KERNELBASE	0x4000000
+#else
 #define KDUMP_KERNELBASE	0x2000000
+#endif
 
 /* How many bytes to reserve at zero for kdump. The reserve limit should
  * be greater or equal to the trampoline's end address.
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kexec.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kexec.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kexec.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kexec.h	2010-08-01 18:11:14.000000000 -0400
@@ -2,6 +2,18 @@
 #define _ASM_POWERPC_KEXEC_H
 #ifdef __KERNEL__
 
+#ifdef CONFIG_FSL_BOOKE
+
+/*
+ * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
+ * and therefore we can only deal with memory within this range
+ */
+#define KEXEC_SOURCE_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_DESTINATION_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_CONTROL_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+
+#else
+
 /*
  * Maximum page that is mapped directly into kernel memory.
  * XXX: Since we copy virt we can use any page we allocate
@@ -21,6 +33,7 @@
 /* TASK_SIZE, probably left over from use_mm ?? */
 #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
 #endif
+#endif
 
 #define KEXEC_CONTROL_PAGE_SIZE 4096
 
@@ -31,6 +44,10 @@
 #define KEXEC_ARCH KEXEC_ARCH_PPC
 #endif
 
+#define KEXEC_STATE_NONE 0
+#define KEXEC_STATE_IRQS_OFF 1
+#define KEXEC_STATE_REAL_MODE 2
+
 #ifndef __ASSEMBLY__
 #include <linux/cpumask.h>
 #include <asm/reg.h>
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kmap_types.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kmap_types.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kmap_types.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kmap_types.h	2010-08-01 18:11:14.000000000 -0400
@@ -26,6 +26,7 @@
 	KM_SOFTIRQ1,
 	KM_PPC_SYNC_PAGE,
 	KM_PPC_SYNC_ICACHE,
+	KM_KDB,
 	KM_TYPE_NR
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_asm.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_asm.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_asm.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_asm.h	2010-08-01 18:11:14.000000000 -0400
@@ -88,6 +88,8 @@
 
 #define BOOK3S_HFLAG_DCBZ32			0x1
 #define BOOK3S_HFLAG_SLB			0x2
+#define BOOK3S_HFLAG_PAIRED_SINGLE		0x4
+#define BOOK3S_HFLAG_NATIVE_PS			0x8
 
 #define RESUME_FLAG_NV          (1<<0)  /* Reload guest nonvolatile state? */
 #define RESUME_FLAG_HOST        (1<<1)  /* Resume host? */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_book3s_32.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_book3s_32.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_book3s_32.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_book3s_32.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,42 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2010
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOK3S_32_H__
+#define __ASM_KVM_BOOK3S_32_H__
+
+static inline struct kvmppc_book3s_shadow_vcpu *to_svcpu(struct kvm_vcpu *vcpu)
+{
+	return to_book3s(vcpu)->shadow_vcpu;
+}
+
+#define PTE_SIZE	12
+#define VSID_ALL	0
+#define SR_INVALID	0x00000001	/* VSID 1 should always be unused */
+#define SR_KP		0x20000000
+#define PTE_V		0x80000000
+#define PTE_SEC		0x00000040
+#define PTE_M		0x00000010
+#define PTE_R		0x00000100
+#define PTE_C		0x00000080
+
+#define SID_SHIFT	28
+#define ESID_MASK	0xf0000000
+#define VSID_MASK	0x00fffffff0000000ULL
+
+#endif /* __ASM_KVM_BOOK3S_32_H__ */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_book3s_64_asm.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_book3s_64_asm.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_book3s_64_asm.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_book3s_64_asm.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,76 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright SUSE Linux Products GmbH 2009
- *
- * Authors: Alexander Graf <agraf@suse.de>
- */
-
-#ifndef __ASM_KVM_BOOK3S_ASM_H__
-#define __ASM_KVM_BOOK3S_ASM_H__
-
-#ifdef __ASSEMBLY__
-
-#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-
-#include <asm/kvm_asm.h>
-
-.macro DO_KVM intno
-	.if (\intno == BOOK3S_INTERRUPT_SYSTEM_RESET) || \
-	    (\intno == BOOK3S_INTERRUPT_MACHINE_CHECK) || \
-	    (\intno == BOOK3S_INTERRUPT_DATA_STORAGE) || \
-	    (\intno == BOOK3S_INTERRUPT_INST_STORAGE) || \
-	    (\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \
-	    (\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \
-	    (\intno == BOOK3S_INTERRUPT_EXTERNAL) || \
-	    (\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \
-	    (\intno == BOOK3S_INTERRUPT_PROGRAM) || \
-	    (\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \
-	    (\intno == BOOK3S_INTERRUPT_DECREMENTER) || \
-	    (\intno == BOOK3S_INTERRUPT_SYSCALL) || \
-	    (\intno == BOOK3S_INTERRUPT_TRACE) || \
-	    (\intno == BOOK3S_INTERRUPT_PERFMON) || \
-	    (\intno == BOOK3S_INTERRUPT_ALTIVEC) || \
-	    (\intno == BOOK3S_INTERRUPT_VSX)
-
-	b	kvmppc_trampoline_\intno
-kvmppc_resume_\intno:
-
-	.endif
-.endm
-
-#else
-
-.macro DO_KVM intno
-.endm
-
-#endif /* CONFIG_KVM_BOOK3S_64_HANDLER */
-
-#else  /*__ASSEMBLY__ */
-
-struct kvmppc_book3s_shadow_vcpu {
-	ulong gpr[14];
-	u32 cr;
-	u32 xer;
-	ulong host_r1;
-	ulong host_r2;
-	ulong handler;
-	ulong scratch0;
-	ulong scratch1;
-	ulong vmhandler;
-};
-
-#endif /*__ASSEMBLY__ */
-
-#endif /* __ASM_KVM_BOOK3S_ASM_H__ */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_book3s_64.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_book3s_64.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_book3s_64.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_book3s_64.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,28 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2010
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOK3S_64_H__
+#define __ASM_KVM_BOOK3S_64_H__
+
+static inline struct kvmppc_book3s_shadow_vcpu *to_svcpu(struct kvm_vcpu *vcpu)
+{
+	return &get_paca()->shadow_vcpu;
+}
+
+#endif /* __ASM_KVM_BOOK3S_64_H__ */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_book3s_asm.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_book3s_asm.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_book3s_asm.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_book3s_asm.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,97 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOK3S_ASM_H__
+#define __ASM_KVM_BOOK3S_ASM_H__
+
+#ifdef __ASSEMBLY__
+
+#ifdef CONFIG_KVM_BOOK3S_HANDLER
+
+#include <asm/kvm_asm.h>
+
+.macro DO_KVM intno
+	.if (\intno == BOOK3S_INTERRUPT_SYSTEM_RESET) || \
+	    (\intno == BOOK3S_INTERRUPT_MACHINE_CHECK) || \
+	    (\intno == BOOK3S_INTERRUPT_DATA_STORAGE) || \
+	    (\intno == BOOK3S_INTERRUPT_INST_STORAGE) || \
+	    (\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \
+	    (\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \
+	    (\intno == BOOK3S_INTERRUPT_EXTERNAL) || \
+	    (\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \
+	    (\intno == BOOK3S_INTERRUPT_PROGRAM) || \
+	    (\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \
+	    (\intno == BOOK3S_INTERRUPT_DECREMENTER) || \
+	    (\intno == BOOK3S_INTERRUPT_SYSCALL) || \
+	    (\intno == BOOK3S_INTERRUPT_TRACE) || \
+	    (\intno == BOOK3S_INTERRUPT_PERFMON) || \
+	    (\intno == BOOK3S_INTERRUPT_ALTIVEC) || \
+	    (\intno == BOOK3S_INTERRUPT_VSX)
+
+	b	kvmppc_trampoline_\intno
+kvmppc_resume_\intno:
+
+	.endif
+.endm
+
+#else
+
+.macro DO_KVM intno
+.endm
+
+#endif /* CONFIG_KVM_BOOK3S_HANDLER */
+
+#else  /*__ASSEMBLY__ */
+
+struct kvmppc_book3s_shadow_vcpu {
+	ulong gpr[14];
+	u32 cr;
+	u32 xer;
+
+	u32 fault_dsisr;
+	u32 last_inst;
+	ulong ctr;
+	ulong lr;
+	ulong pc;
+	ulong shadow_srr1;
+	ulong fault_dar;
+
+	ulong host_r1;
+	ulong host_r2;
+	ulong handler;
+	ulong scratch0;
+	ulong scratch1;
+	ulong vmhandler;
+	u8 in_guest;
+
+#ifdef CONFIG_PPC_BOOK3S_32
+	u32     sr[16];			/* Guest SRs */
+#endif
+#ifdef CONFIG_PPC_BOOK3S_64
+	u8 slb_max;			/* highest used guest slb entry */
+	struct  {
+		u64     esid;
+		u64     vsid;
+	} slb[64];			/* guest SLB */
+#endif
+};
+
+#endif /*__ASSEMBLY__ */
+
+#endif /* __ASM_KVM_BOOK3S_ASM_H__ */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_book3s.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_book3s.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_book3s.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_book3s.h	2010-08-01 18:11:14.000000000 -0400
@@ -22,46 +22,47 @@
 
 #include <linux/types.h>
 #include <linux/kvm_host.h>
-#include <asm/kvm_book3s_64_asm.h>
+#include <asm/kvm_book3s_asm.h>
 
 struct kvmppc_slb {
 	u64 esid;
 	u64 vsid;
 	u64 orige;
 	u64 origv;
-	bool valid;
-	bool Ks;
-	bool Kp;
-	bool nx;
-	bool large;	/* PTEs are 16MB */
-	bool tb;	/* 1TB segment */
-	bool class;
+	bool valid	: 1;
+	bool Ks		: 1;
+	bool Kp		: 1;
+	bool nx		: 1;
+	bool large	: 1;	/* PTEs are 16MB */
+	bool tb		: 1;	/* 1TB segment */
+	bool class	: 1;
 };
 
 struct kvmppc_sr {
 	u32 raw;
 	u32 vsid;
-	bool Ks;
-	bool Kp;
-	bool nx;
+	bool Ks		: 1;
+	bool Kp		: 1;
+	bool nx		: 1;
+	bool valid	: 1;
 };
 
 struct kvmppc_bat {
 	u64 raw;
 	u32 bepi;
 	u32 bepi_mask;
-	bool vs;
-	bool vp;
 	u32 brpn;
 	u8 wimg;
 	u8 pp;
+	bool vs		: 1;
+	bool vp		: 1;
 };
 
 struct kvmppc_sid_map {
 	u64 guest_vsid;
 	u64 guest_esid;
 	u64 host_vsid;
-	bool valid;
+	bool valid	: 1;
 };
 
 #define SID_MAP_BITS    9
@@ -70,7 +71,7 @@
 
 struct kvmppc_vcpu_book3s {
 	struct kvm_vcpu vcpu;
-	struct kvmppc_book3s_shadow_vcpu shadow_vcpu;
+	struct kvmppc_book3s_shadow_vcpu *shadow_vcpu;
 	struct kvmppc_sid_map sid_map[SID_MAP_NUM];
 	struct kvmppc_slb slb[64];
 	struct {
@@ -82,9 +83,10 @@
 	struct kvmppc_bat ibat[8];
 	struct kvmppc_bat dbat[8];
 	u64 hid[6];
+	u64 gqr[8];
 	int slb_nr;
+	u32 dsisr;
 	u64 sdr1;
-	u64 dsisr;
 	u64 hior;
 	u64 msr_mask;
 	u64 vsid_first;
@@ -98,15 +100,15 @@
 #define CONTEXT_GUEST		1
 #define CONTEXT_GUEST_END	2
 
-#define VSID_REAL	0xfffffffffff00000
-#define VSID_REAL_DR	0xffffffffffe00000
-#define VSID_REAL_IR	0xffffffffffd00000
-#define VSID_BAT	0xffffffffffc00000
-#define VSID_PR		0x8000000000000000
+#define VSID_REAL	0x1fffffffffc00000ULL
+#define VSID_BAT	0x1fffffffffb00000ULL
+#define VSID_REAL_DR	0x2000000000000000ULL
+#define VSID_REAL_IR	0x4000000000000000ULL
+#define VSID_PR		0x8000000000000000ULL
 
-extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 ea, u64 ea_mask);
+extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, ulong ea, ulong ea_mask);
 extern void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 vp, u64 vp_mask);
-extern void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, u64 pa_start, u64 pa_end);
+extern void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, ulong pa_start, ulong pa_end);
 extern void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 new_msr);
 extern void kvmppc_mmu_book3s_64_init(struct kvm_vcpu *vcpu);
 extern void kvmppc_mmu_book3s_32_init(struct kvm_vcpu *vcpu);
@@ -114,11 +116,13 @@
 extern int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr);
 extern void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu);
 extern struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data);
-extern int kvmppc_ld(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr, bool data);
-extern int kvmppc_st(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr);
+extern int kvmppc_ld(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr, bool data);
+extern int kvmppc_st(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr, bool data);
 extern void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec);
 extern void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat,
 			   bool upper, u32 val);
+extern void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr);
+extern int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu);
 
 extern u32 kvmppc_trampoline_lowmem;
 extern u32 kvmppc_trampoline_enter;
@@ -126,6 +130,8 @@
 extern void kvmppc_load_up_fpu(void);
 extern void kvmppc_load_up_altivec(void);
 extern void kvmppc_load_up_vsx(void);
+extern u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst);
+extern ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst);
 
 static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu)
 {
@@ -140,7 +146,108 @@
 }
 
 extern void kvm_return_point(void);
+static inline struct kvmppc_book3s_shadow_vcpu *to_svcpu(struct kvm_vcpu *vcpu);
+
+static inline void kvmppc_set_gpr(struct kvm_vcpu *vcpu, int num, ulong val)
+{
+	if ( num < 14 ) {
+		to_svcpu(vcpu)->gpr[num] = val;
+		to_book3s(vcpu)->shadow_vcpu->gpr[num] = val;
+	} else
+		vcpu->arch.gpr[num] = val;
+}
+
+static inline ulong kvmppc_get_gpr(struct kvm_vcpu *vcpu, int num)
+{
+	if ( num < 14 )
+		return to_svcpu(vcpu)->gpr[num];
+	else
+		return vcpu->arch.gpr[num];
+}
+
+static inline void kvmppc_set_cr(struct kvm_vcpu *vcpu, u32 val)
+{
+	to_svcpu(vcpu)->cr = val;
+	to_book3s(vcpu)->shadow_vcpu->cr = val;
+}
+
+static inline u32 kvmppc_get_cr(struct kvm_vcpu *vcpu)
+{
+	return to_svcpu(vcpu)->cr;
+}
+
+static inline void kvmppc_set_xer(struct kvm_vcpu *vcpu, u32 val)
+{
+	to_svcpu(vcpu)->xer = val;
+	to_book3s(vcpu)->shadow_vcpu->xer = val;
+}
+
+static inline u32 kvmppc_get_xer(struct kvm_vcpu *vcpu)
+{
+	return to_svcpu(vcpu)->xer;
+}
+
+static inline void kvmppc_set_ctr(struct kvm_vcpu *vcpu, ulong val)
+{
+	to_svcpu(vcpu)->ctr = val;
+}
+
+static inline ulong kvmppc_get_ctr(struct kvm_vcpu *vcpu)
+{
+	return to_svcpu(vcpu)->ctr;
+}
+
+static inline void kvmppc_set_lr(struct kvm_vcpu *vcpu, ulong val)
+{
+	to_svcpu(vcpu)->lr = val;
+}
+
+static inline ulong kvmppc_get_lr(struct kvm_vcpu *vcpu)
+{
+	return to_svcpu(vcpu)->lr;
+}
+
+static inline void kvmppc_set_pc(struct kvm_vcpu *vcpu, ulong val)
+{
+	to_svcpu(vcpu)->pc = val;
+}
+
+static inline ulong kvmppc_get_pc(struct kvm_vcpu *vcpu)
+{
+	return to_svcpu(vcpu)->pc;
+}
+
+static inline u32 kvmppc_get_last_inst(struct kvm_vcpu *vcpu)
+{
+	ulong pc = kvmppc_get_pc(vcpu);
+	struct kvmppc_book3s_shadow_vcpu *svcpu = to_svcpu(vcpu);
+
+	/* Load the instruction manually if it failed to do so in the
+	 * exit path */
+	if (svcpu->last_inst == KVM_INST_FETCH_FAILED)
+		kvmppc_ld(vcpu, &pc, sizeof(u32), &svcpu->last_inst, false);
+
+	return svcpu->last_inst;
+}
+
+static inline ulong kvmppc_get_fault_dar(struct kvm_vcpu *vcpu)
+{
+	return to_svcpu(vcpu)->fault_dar;
+}
+
+/* Magic register values loaded into r3 and r4 before the 'sc' assembly
+ * instruction for the OSI hypercalls */
+#define OSI_SC_MAGIC_R3			0x113724FA
+#define OSI_SC_MAGIC_R4			0x77810F9B
 
 #define INS_DCBZ			0x7c0007ec
 
+/* Also add subarch specific defines */
+
+#ifdef CONFIG_PPC_BOOK3S_32
+#include <asm/kvm_book3s_32.h>
+#else
+#include <asm/kvm_book3s_64.h>
+#endif
+
 #endif /* __ASM_KVM_BOOK3S_H__ */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_booke.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_booke.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_booke.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_booke.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,96 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2010
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOKE_H__
+#define __ASM_KVM_BOOKE_H__
+
+#include <linux/types.h>
+#include <linux/kvm_host.h>
+
+static inline void kvmppc_set_gpr(struct kvm_vcpu *vcpu, int num, ulong val)
+{
+	vcpu->arch.gpr[num] = val;
+}
+
+static inline ulong kvmppc_get_gpr(struct kvm_vcpu *vcpu, int num)
+{
+	return vcpu->arch.gpr[num];
+}
+
+static inline void kvmppc_set_cr(struct kvm_vcpu *vcpu, u32 val)
+{
+	vcpu->arch.cr = val;
+}
+
+static inline u32 kvmppc_get_cr(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.cr;
+}
+
+static inline void kvmppc_set_xer(struct kvm_vcpu *vcpu, u32 val)
+{
+	vcpu->arch.xer = val;
+}
+
+static inline u32 kvmppc_get_xer(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.xer;
+}
+
+static inline u32 kvmppc_get_last_inst(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.last_inst;
+}
+
+static inline void kvmppc_set_ctr(struct kvm_vcpu *vcpu, ulong val)
+{
+	vcpu->arch.ctr = val;
+}
+
+static inline ulong kvmppc_get_ctr(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.ctr;
+}
+
+static inline void kvmppc_set_lr(struct kvm_vcpu *vcpu, ulong val)
+{
+	vcpu->arch.lr = val;
+}
+
+static inline ulong kvmppc_get_lr(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.lr;
+}
+
+static inline void kvmppc_set_pc(struct kvm_vcpu *vcpu, ulong val)
+{
+	vcpu->arch.pc = val;
+}
+
+static inline ulong kvmppc_get_pc(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.pc;
+}
+
+static inline ulong kvmppc_get_fault_dar(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.fault_dear;
+}
+
+#endif /* __ASM_KVM_BOOKE_H__ */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_fpu.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_fpu.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_fpu.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_fpu.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,85 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright Novell Inc. 2010
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_FPU_H__
+#define __ASM_KVM_FPU_H__
+
+#include <linux/types.h>
+
+extern void fps_fres(struct thread_struct *t, u32 *dst, u32 *src1);
+extern void fps_frsqrte(struct thread_struct *t, u32 *dst, u32 *src1);
+extern void fps_fsqrts(struct thread_struct *t, u32 *dst, u32 *src1);
+
+extern void fps_fadds(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2);
+extern void fps_fdivs(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2);
+extern void fps_fmuls(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2);
+extern void fps_fsubs(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2);
+
+extern void fps_fmadds(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+		       u32 *src3);
+extern void fps_fmsubs(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+		       u32 *src3);
+extern void fps_fnmadds(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+		        u32 *src3);
+extern void fps_fnmsubs(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+		        u32 *src3);
+extern void fps_fsel(struct thread_struct *t, u32 *dst, u32 *src1, u32 *src2,
+		     u32 *src3);
+
+#define FPD_ONE_IN(name) extern void fpd_ ## name(u64 *fpscr, u32 *cr, \
+				u64 *dst, u64 *src1);
+#define FPD_TWO_IN(name) extern void fpd_ ## name(u64 *fpscr, u32 *cr, \
+				u64 *dst, u64 *src1, u64 *src2);
+#define FPD_THREE_IN(name) extern void fpd_ ## name(u64 *fpscr, u32 *cr, \
+				u64 *dst, u64 *src1, u64 *src2, u64 *src3);
+
+extern void fpd_fcmpu(u64 *fpscr, u32 *cr, u64 *src1, u64 *src2);
+extern void fpd_fcmpo(u64 *fpscr, u32 *cr, u64 *src1, u64 *src2);
+
+FPD_ONE_IN(fsqrts)
+FPD_ONE_IN(frsqrtes)
+FPD_ONE_IN(fres)
+FPD_ONE_IN(frsp)
+FPD_ONE_IN(fctiw)
+FPD_ONE_IN(fctiwz)
+FPD_ONE_IN(fsqrt)
+FPD_ONE_IN(fre)
+FPD_ONE_IN(frsqrte)
+FPD_ONE_IN(fneg)
+FPD_ONE_IN(fabs)
+FPD_TWO_IN(fadds)
+FPD_TWO_IN(fsubs)
+FPD_TWO_IN(fdivs)
+FPD_TWO_IN(fmuls)
+FPD_TWO_IN(fcpsgn)
+FPD_TWO_IN(fdiv)
+FPD_TWO_IN(fadd)
+FPD_TWO_IN(fmul)
+FPD_TWO_IN(fsub)
+FPD_THREE_IN(fmsubs)
+FPD_THREE_IN(fmadds)
+FPD_THREE_IN(fnmsubs)
+FPD_THREE_IN(fnmadds)
+FPD_THREE_IN(fsel)
+FPD_THREE_IN(fmsub)
+FPD_THREE_IN(fmadd)
+FPD_THREE_IN(fnmsub)
+FPD_THREE_IN(fnmadd)
+
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm.h	2010-08-01 18:11:14.000000000 -0400
@@ -77,4 +77,14 @@
 struct kvm_guest_debug_arch {
 };
 
+#define KVM_REG_MASK		0x001f
+#define KVM_REG_EXT_MASK	0xffe0
+#define KVM_REG_GPR		0x0000
+#define KVM_REG_FPR		0x0020
+#define KVM_REG_QPR		0x0040
+#define KVM_REG_FQPR		0x0060
+
+#define KVM_INTERRUPT_SET	-1U
+#define KVM_INTERRUPT_UNSET	-2U
+
 #endif /* __LINUX_KVM_POWERPC_H */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_host.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_host.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_host.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_host.h	2010-08-01 18:11:14.000000000 -0400
@@ -66,7 +66,7 @@
 	u32 dec_exits;
 	u32 ext_intr_exits;
 	u32 halt_wakeup;
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 	u32 pf_storage;
 	u32 pf_instruc;
 	u32 sp_storage;
@@ -124,12 +124,12 @@
 };
 
 struct kvmppc_pte {
-	u64 eaddr;
+	ulong eaddr;
 	u64 vpage;
-	u64 raddr;
-	bool may_read;
-	bool may_write;
-	bool may_execute;
+	ulong raddr;
+	bool may_read		: 1;
+	bool may_write		: 1;
+	bool may_execute	: 1;
 };
 
 struct kvmppc_mmu {
@@ -145,7 +145,7 @@
 	int  (*xlate)(struct kvm_vcpu *vcpu, gva_t eaddr, struct kvmppc_pte *pte, bool data);
 	void (*reset_msr)(struct kvm_vcpu *vcpu);
 	void (*tlbie)(struct kvm_vcpu *vcpu, ulong addr, bool large);
-	int  (*esid_to_vsid)(struct kvm_vcpu *vcpu, u64 esid, u64 *vsid);
+	int  (*esid_to_vsid)(struct kvm_vcpu *vcpu, ulong esid, u64 *vsid);
 	u64  (*ea_to_vp)(struct kvm_vcpu *vcpu, gva_t eaddr, bool data);
 	bool (*is_dcbz32)(struct kvm_vcpu *vcpu);
 };
@@ -160,7 +160,7 @@
 struct kvm_vcpu_arch {
 	ulong host_stack;
 	u32 host_pid;
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 	ulong host_msr;
 	ulong host_r2;
 	void *host_retip;
@@ -175,7 +175,7 @@
 	ulong gpr[32];
 
 	u64 fpr[32];
-	u32 fpscr;
+	u64 fpscr;
 
 #ifdef CONFIG_ALTIVEC
 	vector128 vr[32];
@@ -186,19 +186,23 @@
 	u64 vsr[32];
 #endif
 
+#ifdef CONFIG_PPC_BOOK3S
+	/* For Gekko paired singles */
+	u32 qpr[32];
+#endif
+
+#ifdef CONFIG_BOOKE
 	ulong pc;
 	ulong ctr;
 	ulong lr;
 
-#ifdef CONFIG_BOOKE
 	ulong xer;
 	u32 cr;
 #endif
 
 	ulong msr;
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 	ulong shadow_msr;
-	ulong shadow_srr1;
 	ulong hflags;
 	ulong guest_owned_ext;
 #endif
@@ -253,20 +257,22 @@
 	struct dentry *debugfs_exit_timing;
 #endif
 
+#ifdef CONFIG_BOOKE
 	u32 last_inst;
-#ifdef CONFIG_PPC64
-	ulong fault_dsisr;
-#endif
 	ulong fault_dear;
 	ulong fault_esr;
 	ulong queued_dear;
 	ulong queued_esr;
+#endif
 	gpa_t paddr_accessed;
 
 	u8 io_gpr; /* GPR used as IO source/target */
 	u8 mmio_is_bigendian;
+	u8 mmio_sign_extend;
 	u8 dcr_needed;
 	u8 dcr_is_write;
+	u8 osi_needed;
+	u8 osi_enabled;
 
 	u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
 
@@ -275,7 +281,7 @@
 	u64 dec_jiffies;
 	unsigned long pending_exceptions;
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 	struct hpte_cache hpte_cache[HPTEG_CACHE_NUM];
 	int hpte_cache_offset;
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_ppc.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_ppc.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/kvm_ppc.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/kvm_ppc.h	2010-08-01 18:11:14.000000000 -0400
@@ -30,6 +30,8 @@
 #include <linux/kvm_host.h>
 #ifdef CONFIG_PPC_BOOK3S
 #include <asm/kvm_book3s.h>
+#else
+#include <asm/kvm_booke.h>
 #endif
 
 enum emulation_result {
@@ -37,6 +39,7 @@
 	EMULATE_DO_MMIO,      /* kvm_run filled with MMIO request */
 	EMULATE_DO_DCR,       /* kvm_run filled with DCR request */
 	EMULATE_FAIL,         /* can't emulate this instruction */
+	EMULATE_AGAIN,        /* something went wrong. go again */
 };
 
 extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
@@ -48,8 +51,11 @@
 extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
                               unsigned int rt, unsigned int bytes,
                               int is_bigendian);
+extern int kvmppc_handle_loads(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                               unsigned int rt, unsigned int bytes,
+                               int is_bigendian);
 extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
-                               u32 val, unsigned int bytes, int is_bigendian);
+                               u64 val, unsigned int bytes, int is_bigendian);
 
 extern int kvmppc_emulate_instruction(struct kvm_run *run,
                                       struct kvm_vcpu *vcpu);
@@ -63,6 +69,7 @@
 extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
 extern void kvmppc_mmu_switch_pid(struct kvm_vcpu *vcpu, u32 pid);
 extern void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu);
+extern int kvmppc_mmu_init(struct kvm_vcpu *vcpu);
 extern int kvmppc_mmu_dtlb_index(struct kvm_vcpu *vcpu, gva_t eaddr);
 extern int kvmppc_mmu_itlb_index(struct kvm_vcpu *vcpu, gva_t eaddr);
 extern gpa_t kvmppc_mmu_xlate(struct kvm_vcpu *vcpu, unsigned int gtlb_index,
@@ -88,6 +95,8 @@
 extern void kvmppc_core_dequeue_dec(struct kvm_vcpu *vcpu);
 extern void kvmppc_core_queue_external(struct kvm_vcpu *vcpu,
                                        struct kvm_interrupt *irq);
+extern void kvmppc_core_dequeue_external(struct kvm_vcpu *vcpu,
+                                         struct kvm_interrupt *irq);
 
 extern int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
                                   unsigned int op, int *advance);
@@ -99,81 +108,37 @@
 
 extern void kvmppc_core_destroy_mmu(struct kvm_vcpu *vcpu);
 
-#ifdef CONFIG_PPC_BOOK3S
-
-/* We assume we're always acting on the current vcpu */
-
-static inline void kvmppc_set_gpr(struct kvm_vcpu *vcpu, int num, ulong val)
-{
-	if ( num < 14 ) {
-		get_paca()->shadow_vcpu.gpr[num] = val;
-		to_book3s(vcpu)->shadow_vcpu.gpr[num] = val;
-	} else
-		vcpu->arch.gpr[num] = val;
-}
-
-static inline ulong kvmppc_get_gpr(struct kvm_vcpu *vcpu, int num)
-{
-	if ( num < 14 )
-		return get_paca()->shadow_vcpu.gpr[num];
-	else
-		return vcpu->arch.gpr[num];
-}
-
-static inline void kvmppc_set_cr(struct kvm_vcpu *vcpu, u32 val)
-{
-	get_paca()->shadow_vcpu.cr = val;
-	to_book3s(vcpu)->shadow_vcpu.cr = val;
-}
-
-static inline u32 kvmppc_get_cr(struct kvm_vcpu *vcpu)
-{
-	return get_paca()->shadow_vcpu.cr;
-}
-
-static inline void kvmppc_set_xer(struct kvm_vcpu *vcpu, u32 val)
-{
-	get_paca()->shadow_vcpu.xer = val;
-	to_book3s(vcpu)->shadow_vcpu.xer = val;
-}
-
-static inline u32 kvmppc_get_xer(struct kvm_vcpu *vcpu)
+/*
+ * Cuts out inst bits with ordering according to spec.
+ * That means the leftmost bit is zero. All given bits are included.
+ */
+static inline u32 kvmppc_get_field(u64 inst, int msb, int lsb)
 {
-	return get_paca()->shadow_vcpu.xer;
-}
+	u32 r;
+	u32 mask;
 
-#else
+	BUG_ON(msb > lsb);
 
-static inline void kvmppc_set_gpr(struct kvm_vcpu *vcpu, int num, ulong val)
-{
-	vcpu->arch.gpr[num] = val;
-}
+	mask = (1 << (lsb - msb + 1)) - 1;
+	r = (inst >> (63 - lsb)) & mask;
 
-static inline ulong kvmppc_get_gpr(struct kvm_vcpu *vcpu, int num)
-{
-	return vcpu->arch.gpr[num];
+	return r;
 }
 
-static inline void kvmppc_set_cr(struct kvm_vcpu *vcpu, u32 val)
+/*
+ * Replaces inst bits with ordering according to spec.
+ */
+static inline u32 kvmppc_set_field(u64 inst, int msb, int lsb, int value)
 {
-	vcpu->arch.cr = val;
-}
+	u32 r;
+	u32 mask;
 
-static inline u32 kvmppc_get_cr(struct kvm_vcpu *vcpu)
-{
-	return vcpu->arch.cr;
-}
+	BUG_ON(msb > lsb);
 
-static inline void kvmppc_set_xer(struct kvm_vcpu *vcpu, u32 val)
-{
-	vcpu->arch.xer = val;
-}
+	mask = ((1 << (lsb - msb + 1)) - 1) << (63 - lsb);
+	r = (inst & ~mask) | ((value << (63 - lsb)) & mask);
 
-static inline u32 kvmppc_get_xer(struct kvm_vcpu *vcpu)
-{
-	return vcpu->arch.xer;
+	return r;
 }
 
-#endif
-
 #endif /* __POWERPC_KVM_PPC_H__ */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/lmb.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/lmb.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/lmb.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/lmb.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,15 +0,0 @@
-#ifndef _ASM_POWERPC_LMB_H
-#define _ASM_POWERPC_LMB_H
-
-#include <asm/udbg.h>
-
-#define LMB_DBG(fmt...) udbg_printf(fmt)
-
-#ifdef CONFIG_PPC32
-extern phys_addr_t lowmem_end_addr;
-#define LMB_REAL_LIMIT	lowmem_end_addr
-#else
-#define LMB_REAL_LIMIT	0
-#endif
-
-#endif /* _ASM_POWERPC_LMB_H */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/macio.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/macio.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/macio.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/macio.h	2010-08-01 18:11:14.000000000 -0400
@@ -108,7 +108,7 @@
 
 static inline struct device_node *macio_get_of_node(struct macio_dev *mdev)
 {
-	return mdev->ofdev.node;
+	return mdev->ofdev.dev.of_node;
 }
 
 #ifdef CONFIG_PCI
@@ -123,10 +123,6 @@
  */
 struct macio_driver
 {
-	char			*name;
-	struct of_device_id	*match_table;
-	struct module		*owner;
-
 	int	(*probe)(struct macio_dev* dev, const struct of_device_id *match);
 	int	(*remove)(struct macio_dev* dev);
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/memblock.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/memblock.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/memblock.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/memblock.h	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,15 @@
+#ifndef _ASM_POWERPC_MEMBLOCK_H
+#define _ASM_POWERPC_MEMBLOCK_H
+
+#include <asm/udbg.h>
+
+#define MEMBLOCK_DBG(fmt...) udbg_printf(fmt)
+
+#ifdef CONFIG_PPC32
+extern phys_addr_t lowmem_end_addr;
+#define MEMBLOCK_REAL_LIMIT	lowmem_end_addr
+#else
+#define MEMBLOCK_REAL_LIMIT	0
+#endif
+
+#endif /* _ASM_POWERPC_MEMBLOCK_H */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mmu-44x.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mmu-44x.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mmu-44x.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mmu-44x.h	2010-08-01 18:11:14.000000000 -0400
@@ -40,7 +40,7 @@
 #define PPC44x_TLB_I		0x00000400      /* Caching is inhibited */
 #define PPC44x_TLB_M		0x00000200      /* Memory is coherent */
 #define PPC44x_TLB_G		0x00000100      /* Memory is guarded */
-#define PPC44x_TLB_E		0x00000080      /* Memory is guarded */
+#define PPC44x_TLB_E		0x00000080      /* Memory is little endian */
 
 #define PPC44x_TLB_PERM_MASK	0x0000003f
 #define PPC44x_TLB_UX		0x00000020      /* User execution */
@@ -53,6 +53,52 @@
 /* Number of TLB entries */
 #define PPC44x_TLB_SIZE		64
 
+/* 47x bits */
+#define PPC47x_MMUCR_TID	0x0000ffff
+#define PPC47x_MMUCR_STS	0x00010000
+
+/* Page identification fields */
+#define PPC47x_TLB0_EPN_MASK	0xfffff000      /* Effective Page Number */
+#define PPC47x_TLB0_VALID	0x00000800      /* Valid flag */
+#define PPC47x_TLB0_TS		0x00000400	/* Translation address space */
+#define PPC47x_TLB0_4K		0x00000000
+#define PPC47x_TLB0_16K		0x00000010
+#define PPC47x_TLB0_64K		0x00000030
+#define PPC47x_TLB0_1M		0x00000070
+#define PPC47x_TLB0_16M		0x000000f0
+#define PPC47x_TLB0_256M	0x000001f0
+#define PPC47x_TLB0_1G		0x000003f0
+#define PPC47x_TLB0_BOLTED_R	0x00000008	/* tlbre only */
+
+/* Translation fields */
+#define PPC47x_TLB1_RPN_MASK	0xfffff000      /* Real Page Number */
+#define PPC47x_TLB1_ERPN_MASK	0x000003ff
+
+/* Storage attribute and access control fields */
+#define PPC47x_TLB2_ATTR_MASK	0x0003ff80
+#define PPC47x_TLB2_IL1I	0x00020000      /* Memory is guarded */
+#define PPC47x_TLB2_IL1D	0x00010000      /* Memory is guarded */
+#define PPC47x_TLB2_U0		0x00008000      /* User 0 */
+#define PPC47x_TLB2_U1		0x00004000      /* User 1 */
+#define PPC47x_TLB2_U2		0x00002000      /* User 2 */
+#define PPC47x_TLB2_U3		0x00001000      /* User 3 */
+#define PPC47x_TLB2_W		0x00000800      /* Caching is write-through */
+#define PPC47x_TLB2_I		0x00000400      /* Caching is inhibited */
+#define PPC47x_TLB2_M		0x00000200      /* Memory is coherent */
+#define PPC47x_TLB2_G		0x00000100      /* Memory is guarded */
+#define PPC47x_TLB2_E		0x00000080      /* Memory is little endian */
+#define PPC47x_TLB2_PERM_MASK	0x0000003f
+#define PPC47x_TLB2_UX		0x00000020      /* User execution */
+#define PPC47x_TLB2_UW		0x00000010      /* User write */
+#define PPC47x_TLB2_UR		0x00000008      /* User read */
+#define PPC47x_TLB2_SX		0x00000004      /* Super execution */
+#define PPC47x_TLB2_SW		0x00000002      /* Super write */
+#define PPC47x_TLB2_SR		0x00000001      /* Super read */
+#define PPC47x_TLB2_U_RWX	(PPC47x_TLB2_UX|PPC47x_TLB2_UW|PPC47x_TLB2_UR)
+#define PPC47x_TLB2_S_RWX	(PPC47x_TLB2_SX|PPC47x_TLB2_SW|PPC47x_TLB2_SR)
+#define PPC47x_TLB2_S_RW	(PPC47x_TLB2_SW | PPC47x_TLB2_SR)
+#define PPC47x_TLB2_IMG		(PPC47x_TLB2_I | PPC47x_TLB2_M | PPC47x_TLB2_G)
+
 #ifndef __ASSEMBLY__
 
 extern unsigned int tlb_44x_hwater;
@@ -79,12 +125,15 @@
 
 #if (PAGE_SHIFT == 12)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_4K
+#define PPC47x_TLBE_SIZE	PPC47x_TLB0_4K
 #define mmu_virtual_psize	MMU_PAGE_4K
 #elif (PAGE_SHIFT == 14)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_16K
+#define PPC47x_TLBE_SIZE	PPC47x_TLB0_16K
 #define mmu_virtual_psize	MMU_PAGE_16K
 #elif (PAGE_SHIFT == 16)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_64K
+#define PPC47x_TLBE_SIZE	PPC47x_TLB0_64K
 #define mmu_virtual_psize	MMU_PAGE_64K
 #elif (PAGE_SHIFT == 18)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_256K
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mmu_context.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mmu_context.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mmu_context.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mmu_context.h	2010-08-01 18:11:14.000000000 -0400
@@ -27,6 +27,8 @@
 extern void __destroy_context(int context_id);
 static inline void mmu_context_init(void) { }
 #else
+extern unsigned long __init_new_context(void);
+extern void __destroy_context(unsigned long context_id);
 extern void mmu_context_init(void);
 #endif
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mmu.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mmu.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mmu.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mmu.h	2010-08-01 18:11:14.000000000 -0400
@@ -18,6 +18,7 @@
 #define MMU_FTR_TYPE_44x		ASM_CONST(0x00000008)
 #define MMU_FTR_TYPE_FSL_E		ASM_CONST(0x00000010)
 #define MMU_FTR_TYPE_3E			ASM_CONST(0x00000020)
+#define MMU_FTR_TYPE_47x		ASM_CONST(0x00000040)
 
 /*
  * This is individual features
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mmu-hash64.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mmu-hash64.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mmu-hash64.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mmu-hash64.h	2010-08-01 18:11:14.000000000 -0400
@@ -250,7 +250,9 @@
 int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		     pte_t *ptep, unsigned long trap, int local, int ssize,
 		     unsigned int shift, unsigned int mmu_psize);
-
+extern void hash_failure_debug(unsigned long ea, unsigned long access,
+			       unsigned long vsid, unsigned long trap,
+			       int ssize, int psize, unsigned long pte);
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mmzone.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mmzone.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mmzone.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mmzone.h	2010-08-01 18:11:14.000000000 -0400
@@ -30,7 +30,7 @@
  */
 
 extern int numa_cpu_lookup_table[];
-extern cpumask_t numa_cpumask_lookup_table[];
+extern cpumask_var_t node_to_cpumask_map[];
 #ifdef CONFIG_MEMORY_HOTPLUG
 extern unsigned long max_pfn;
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mpc52xx_psc.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mpc52xx_psc.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mpc52xx_psc.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mpc52xx_psc.h	2010-08-01 18:11:14.000000000 -0400
@@ -248,6 +248,7 @@
 	u16		tflwfptr;	/* PSC + 0x9e */
 };
 
+#define MPC512x_PSC_FIFO_EOF		0x100
 #define MPC512x_PSC_FIFO_RESET_SLICE	0x80
 #define MPC512x_PSC_FIFO_ENABLE_SLICE	0x01
 #define MPC512x_PSC_FIFO_ENABLE_DMA	0x04
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mpic.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mpic.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/mpic.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/mpic.h	2010-08-01 18:11:14.000000000 -0400
@@ -463,9 +463,6 @@
 /* Request IPIs on primary mpic */
 extern void mpic_request_ipis(void);
 
-/* Send an IPI (non offseted number 0..3) */
-extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
-
 /* Send a message (IPI) to a given target (cpu number or MSG_*) */
 void smp_mpic_message_pass(int target, int msg);
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/of_device.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/of_device.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/of_device.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/of_device.h	2010-08-01 18:11:14.000000000 -0400
@@ -12,9 +12,8 @@
  */
 struct of_device
 {
-	struct device_node	*node;		/* to be obsoleted */
-	u64			dma_mask;	/* DMA mask */
 	struct device		dev;		/* Generic device interface */
+	struct pdev_archdata	archdata;
 };
 
 extern struct of_device *of_device_alloc(struct device_node *np,
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/paca.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/paca.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/paca.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/paca.h	2010-08-01 18:11:14.000000000 -0400
@@ -23,7 +23,7 @@
 #include <asm/page.h>
 #include <asm/exception-64e.h>
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-#include <asm/kvm_book3s_64_asm.h>
+#include <asm/kvm_book3s_asm.h>
 #endif
 
 register struct paca_struct *local_paca asm("r13");
@@ -82,6 +82,7 @@
 	s16 hw_cpu_id;			/* Physical processor number */
 	u8 cpu_start;			/* At startup, processor spins until */
 					/* this becomes non-zero. */
+	u8 kexec_state;		/* set when kexec down has irqs off */
 #ifdef CONFIG_PPC_STD_MMU_64
 	struct slb_shadow *slb_shadow_ptr;
 
@@ -136,15 +137,9 @@
 	u64 startpurr;			/* PURR/TB value snapshot */
 	u64 startspurr;			/* SPURR value snapshot */
 
-#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-	struct  {
-		u64     esid;
-		u64     vsid;
-	} kvm_slb[64];			/* guest SLB */
+#ifdef CONFIG_KVM_BOOK3S_HANDLER
 	/* We use this to store guest state in */
 	struct kvmppc_book3s_shadow_vcpu shadow_vcpu;
-	u8 kvm_slb_max;			/* highest used guest slb entry */
-	u8 kvm_in_guest;		/* are we inside the guest? */
 #endif
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/page_64.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/page_64.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/page_64.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/page_64.h	2010-08-01 18:11:14.000000000 -0400
@@ -162,14 +162,6 @@
 
 #endif /* !CONFIG_HUGETLB_PAGE */
 
-#ifdef MODULE
-#define __page_aligned __attribute__((__aligned__(PAGE_SIZE)))
-#else
-#define __page_aligned \
-	__attribute__((__aligned__(PAGE_SIZE), \
-		__section__(".data.page_aligned")))
-#endif
-
 #define VM_DATA_DEFAULT_FLAGS \
 	(test_thread_flag(TIF_32BIT) ? \
 	 VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/parport.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/parport.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/parport.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/parport.h	2010-08-01 18:11:14.000000000 -0400
@@ -19,6 +19,8 @@
 	u32 io1, io2;
 	int propsize;
 	int count = 0;
+	int virq;
+
 	for (np = NULL; (np = of_find_compatible_node(np,
 						      "parallel",
 						      "pnpPNP,400")) != NULL;) {
@@ -26,10 +28,13 @@
 		if (!prop || propsize > 6*sizeof(u32))
 			continue;
 		io1 = prop[1]; io2 = prop[2];
-		prop = of_get_property(np, "interrupts", NULL);
-		if (!prop)
+
+		virq = irq_of_parse_and_map(np, 0);
+		if (virq == NO_IRQ)
 			continue;
-		if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL, 0) != NULL)
+
+		if (parport_pc_probe_port(io1, io2, virq, autodma, NULL, 0)
+				!= NULL)
 			count++;
 	}
 	return count;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/pgalloc-64.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/pgalloc-64.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/pgalloc-64.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/pgalloc-64.h	2010-08-01 18:11:14.000000000 -0400
@@ -11,6 +11,12 @@
 #include <linux/cpumask.h>
 #include <linux/percpu.h>
 
+struct vmemmap_backing {
+	struct vmemmap_backing *list;
+	unsigned long phys;
+	unsigned long virt_addr;
+};
+
 /*
  * Functions that deal with pagetables that could be at any level of
  * the table need to be passed an "index_size" so they know how to
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/pgtable-ppc32.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/pgtable-ppc32.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/pgtable-ppc32.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/pgtable-ppc32.h	2010-08-01 18:11:14.000000000 -0400
@@ -287,7 +287,7 @@
 #define pmd_page_vaddr(pmd)	\
 	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
 #define pmd_page(pmd)		\
-	(mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
+	pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
 #else
 #define pmd_page_vaddr(pmd)	\
 	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/processor.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/processor.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/processor.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/processor.h	2010-08-01 18:11:14.000000000 -0400
@@ -229,6 +229,9 @@
 	unsigned long	spefscr;	/* SPE & eFP status */
 	int		used_spe;	/* set if process has used spe */
 #endif /* CONFIG_SPE */
+#ifdef CONFIG_KVM_BOOK3S_32_HANDLER
+	void*		kvm_shadow_vcpu; /* KVM internal data */
+#endif /* CONFIG_KVM_BOOK3S_32_HANDLER */
 };
 
 #define ARCH_MIN_TASKALIGN 16
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/ptrace.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/ptrace.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/ptrace.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/ptrace.h	2010-08-01 18:11:14.000000000 -0400
@@ -24,11 +24,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#ifdef __KERNEL__
 #include <linux/types.h>
-#else
-#include <stdint.h>
-#endif
 
 #ifndef __ASSEMBLY__
 
@@ -89,6 +85,7 @@
 
 #define instruction_pointer(regs) ((regs)->nip)
 #define user_stack_pointer(regs) ((regs)->gpr[1])
+#define kernel_stack_pointer(regs) ((regs)->gpr[1])
 #define regs_return_value(regs) ((regs)->gpr[3])
 
 #ifdef CONFIG_SMP
@@ -141,6 +138,69 @@
 #define arch_has_block_step()	(!cpu_has_feature(CPU_FTR_601))
 #define ARCH_HAS_USER_SINGLE_STEP_INFO
 
+/*
+ * kprobe-based event tracer support
+ */
+
+#include <linux/stddef.h>
+#include <linux/thread_info.h>
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+#define MAX_REG_OFFSET (offsetof(struct pt_regs, dsisr))
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	   pt_regs from which register value is gotten
+ * @offset:    offset number of the register.
+ *
+ * regs_get_register returns the value of a register whose offset from @regs.
+ * The @offset is the offset of the register in struct pt_regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+						unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:      pt_regs which contains kernel stack pointer.
+ * @addr:      address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+
+static inline bool regs_within_kernel_stack(struct pt_regs *regs,
+						unsigned long addr)
+{
+	return ((addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+						      unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
@@ -300,13 +360,13 @@
 #ifndef __ASSEMBLY__
 
 struct ppc_debug_info {
-	uint32_t version;		/* Only version 1 exists to date */
-	uint32_t num_instruction_bps;
-	uint32_t num_data_bps;
-	uint32_t num_condition_regs;
-	uint32_t data_bp_alignment;
-	uint32_t sizeof_condition;	/* size of the DVC register */
-	uint64_t features;
+	__u32 version;			/* Only version 1 exists to date */
+	__u32 num_instruction_bps;
+	__u32 num_data_bps;
+	__u32 num_condition_regs;
+	__u32 data_bp_alignment;
+	__u32 sizeof_condition;		/* size of the DVC register */
+	__u64 features;
 };
 
 #endif /* __ASSEMBLY__ */
@@ -322,13 +382,13 @@
 #ifndef __ASSEMBLY__
 
 struct ppc_hw_breakpoint {
-	uint32_t version;		/* currently, version must be 1 */
-	uint32_t trigger_type;		/* only some combinations allowed */
-	uint32_t addr_mode;		/* address match mode */
-	uint32_t condition_mode;	/* break/watchpoint condition flags */
-	uint64_t addr;			/* break/watchpoint address */
-	uint64_t addr2;			/* range end or mask */
-	uint64_t condition_value;	/* contents of the DVC register */
+	__u32 version;		/* currently, version must be 1 */
+	__u32 trigger_type;	/* only some combinations allowed */
+	__u32 addr_mode;	/* address match mode */
+	__u32 condition_mode;	/* break/watchpoint condition flags */
+	__u64 addr;		/* break/watchpoint address */
+	__u64 addr2;		/* range end or mask */
+	__u64 condition_value;	/* contents of the DVC register */
 };
 
 #endif /* __ASSEMBLY__ */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/reg_booke.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/reg_booke.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/reg_booke.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/reg_booke.h	2010-08-01 18:11:14.000000000 -0400
@@ -4,6 +4,12 @@
  * are not true Book E PowerPCs, they borrowed a number of features
  * before Book E was finalized, and are included here as well.  Unfortunatly,
  * they sometimes used different locations than true Book E CPUs did.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  */
 #ifdef __KERNEL__
 #ifndef __ASM_POWERPC_REG_BOOKE_H__
@@ -88,6 +94,7 @@
 #define SPRN_IVOR35	0x213	/* Interrupt Vector Offset Register 35 */
 #define SPRN_IVOR36	0x214	/* Interrupt Vector Offset Register 36 */
 #define SPRN_IVOR37	0x215	/* Interrupt Vector Offset Register 37 */
+#define SPRN_MCARU	0x239	/* Machine Check Address Register Upper */
 #define SPRN_MCSRR0	0x23A	/* Machine Check Save and Restore Register 0 */
 #define SPRN_MCSRR1	0x23B	/* Machine Check Save and Restore Register 1 */
 #define SPRN_MCSR	0x23C	/* Machine Check Status Register */
@@ -191,9 +198,16 @@
 #define MCSR_DCFP	0x01000000 /* D-Cache Flush Parity Error */
 #define MCSR_IMPE	0x00800000 /* Imprecise Machine Check Exception */
 
+#define PPC47x_MCSR_GPR	0x01000000 /* GPR parity error */
+#define PPC47x_MCSR_FPR	0x00800000 /* FPR parity error */
+#define PPC47x_MCSR_IPR	0x00400000 /* Imprecise Machine Check Exception */
+
 #ifdef CONFIG_E500
+/* All e500 */
 #define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
 #define MCSR_ICPERR 	0x40000000UL /* I-Cache Parity Error */
+
+/* e500v1/v2 */
 #define MCSR_DCP_PERR 	0x20000000UL /* D-Cache Push Parity Error */
 #define MCSR_DCPERR 	0x10000000UL /* D-Cache Parity Error */
 #define MCSR_BUS_IAERR 	0x00000080UL /* Instruction Address Error */
@@ -205,12 +219,20 @@
 #define MCSR_BUS_IPERR 	0x00000002UL /* Instruction parity Error */
 #define MCSR_BUS_RPERR 	0x00000001UL /* Read parity Error */
 
-/* e500 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK	(MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
-			MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
-			MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
-			MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
+/* e500mc */
+#define MCSR_DCPERR_MC	0x20000000UL /* D-Cache Parity Error */
+#define MCSR_L2MMU_MHIT	0x04000000UL /* Hit on multiple TLB entries */
+#define MCSR_NMI	0x00100000UL /* Non-Maskable Interrupt */
+#define MCSR_MAV	0x00080000UL /* MCAR address valid */
+#define MCSR_MEA	0x00040000UL /* MCAR is effective address */
+#define MCSR_IF		0x00010000UL /* Instruction Fetch */
+#define MCSR_LD		0x00008000UL /* Load */
+#define MCSR_ST		0x00004000UL /* Store */
+#define MCSR_LDG	0x00002000UL /* Guarded Load */
+#define MCSR_TLBSYNC	0x00000002UL /* Multiple tlbsyncs detected */
+#define MCSR_BSL2_ERR	0x00000001UL /* Backside L2 cache error */
 #endif
+
 #ifdef CONFIG_E200
 #define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
 #define MCSR_CP_PERR 	0x20000000UL /* Cache Push Parity Error */
@@ -221,11 +243,6 @@
 #define MCSR_BUS_DRERR 	0x00000008UL /* Read Bus Error on data load */
 #define MCSR_BUS_WRERR 	0x00000004UL /* Write Bus Error on buffered
 					store or cache line push */
-
-/* e200 parts may set unused bits in MCSR; mask these off */
-#define MCSR_MASK	(MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
-			MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
-			MCSR_BUS_WRERR)
 #endif
 
 /* Bit definitions for the DBSR. */
@@ -604,5 +621,25 @@
 #define DBCR_JOI	0x00000002	/* JTAG Serial Outbound Int. Enable */
 #define DBCR_JII	0x00000001	/* JTAG Serial Inbound Int. Enable */
 #endif /* 403GCX */
+
+/* Some 476 specific registers */
+#define SPRN_SSPCR		830
+#define SPRN_USPCR		831
+#define SPRN_ISPCR		829
+#define SPRN_MMUBE0		820
+#define MMUBE0_IBE0_SHIFT	24
+#define MMUBE0_IBE1_SHIFT	16
+#define MMUBE0_IBE2_SHIFT	8
+#define MMUBE0_VBE0		0x00000004
+#define MMUBE0_VBE1		0x00000002
+#define MMUBE0_VBE2		0x00000001
+#define SPRN_MMUBE1		821
+#define MMUBE1_IBE3_SHIFT	24
+#define MMUBE1_IBE4_SHIFT	16
+#define MMUBE1_IBE5_SHIFT	8
+#define MMUBE1_VBE3		0x00000004
+#define MMUBE1_VBE4		0x00000002
+#define MMUBE1_VBE5		0x00000001
+
 #endif /* __ASM_POWERPC_REG_BOOKE_H__ */
 #endif /* __KERNEL__ */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/reg.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/reg.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/reg.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/reg.h	2010-08-01 18:11:14.000000000 -0400
@@ -293,10 +293,12 @@
 #define HID1_ABE	(1<<10)		/* 7450 Address Broadcast Enable */
 #define HID1_PS		(1<<16)		/* 750FX PLL selection */
 #define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
+#define SPRN_HID2_GEKKO	0x398		/* Gekko HID2 Register */
 #define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
 #define SPRN_IABR2	0x3FA		/* 83xx */
 #define SPRN_IBCR	0x135		/* 83xx Insn Breakpoint Control Reg */
 #define SPRN_HID4	0x3F4		/* 970 HID4 */
+#define SPRN_HID4_GEKKO	0x3F3		/* Gekko HID4 */
 #define SPRN_HID5	0x3F6		/* 970 HID5 */
 #define SPRN_HID6	0x3F9	/* BE HID 6 */
 #define   HID6_LB	(0x0F<<12) /* Concurrent Large Page Modes */
@@ -465,6 +467,14 @@
 #define SPRN_VRSAVE	0x100	/* Vector Register Save Register */
 #define SPRN_XER	0x001	/* Fixed Point Exception Register */
 
+#define SPRN_MMCR0_GEKKO 0x3B8 /* Gekko Monitor Mode Control Register 0 */
+#define SPRN_MMCR1_GEKKO 0x3BC /* Gekko Monitor Mode Control Register 1 */
+#define SPRN_PMC1_GEKKO  0x3B9 /* Gekko Performance Monitor Control 1 */
+#define SPRN_PMC2_GEKKO  0x3BA /* Gekko Performance Monitor Control 2 */
+#define SPRN_PMC3_GEKKO  0x3BD /* Gekko Performance Monitor Control 3 */
+#define SPRN_PMC4_GEKKO  0x3BE /* Gekko Performance Monitor Control 4 */
+#define SPRN_WPAR_GEKKO  0x399 /* Gekko Write Pipe Address Register */
+
 #define SPRN_SCOMC	0x114	/* SCOM Access Control */
 #define SPRN_SCOMD	0x115	/* SCOM Access DATA */
 
@@ -817,6 +827,7 @@
 #define PVR_403GC	0x00200200
 #define PVR_403GCX	0x00201400
 #define PVR_405GP	0x40110000
+#define PVR_476		0x11a52000
 #define PVR_STB03XXX	0x40310000
 #define PVR_NP405H	0x41410000
 #define PVR_NP405L	0x41610000
@@ -853,6 +864,9 @@
 #define PVR_8245	0x80811014
 #define PVR_8260	PVR_8240
 
+/* 476 Simulator seems to currently have the PVR of the 602... */
+#define PVR_476_ISS	0x00052000
+
 /* 64-bit processors */
 /* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */
 #define PV_NORTHSTAR	0x0033
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/scatterlist.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/scatterlist.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/scatterlist.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/scatterlist.h	2010-08-01 18:11:14.000000000 -0400
@@ -9,38 +9,12 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#ifdef __KERNEL__
-#include <linux/types.h>
 #include <asm/dma.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long sg_magic;
-#endif
-	unsigned long page_link;
-	unsigned int offset;
-	unsigned int length;
-
-	/* For TCE or SWIOTLB support */
-	dma_addr_t dma_address;
-	u32 dma_length;
-};
-
-/*
- * These macros should be used after a dma_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#define sg_dma_len(sg)		((sg)->dma_length)
+#include <asm-generic/scatterlist.h>
 
 #ifdef __powerpc64__
 #define ISA_DMA_THRESHOLD	(~0UL)
 #endif
-
 #define ARCH_HAS_SG_CHAIN
 
-#endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_SCATTERLIST_H */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/smp.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/smp.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/smp.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/smp.h	2010-08-01 18:11:14.000000000 -0400
@@ -40,7 +40,7 @@
 DECLARE_PER_CPU(unsigned int, cpu_pvr);
 
 #ifdef CONFIG_HOTPLUG_CPU
-extern void fixup_irqs(cpumask_t map);
+extern void fixup_irqs(const struct cpumask *map);
 int generic_cpu_disable(void);
 int generic_cpu_enable(unsigned int cpu);
 void generic_cpu_die(unsigned int cpu);
@@ -68,8 +68,19 @@
 }
 #endif
 
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
-DECLARE_PER_CPU(cpumask_t, cpu_core_map);
+DECLARE_PER_CPU(cpumask_var_t, cpu_sibling_map);
+DECLARE_PER_CPU(cpumask_var_t, cpu_core_map);
+
+static inline struct cpumask *cpu_sibling_mask(int cpu)
+{
+	return per_cpu(cpu_sibling_map, cpu);
+}
+
+static inline struct cpumask *cpu_core_mask(int cpu)
+{
+	return per_cpu(cpu_core_map, cpu);
+}
+
 extern int cpu_to_core_id(int cpu);
 
 /* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
@@ -93,7 +104,6 @@
 void smp_init_cell(void);
 void smp_init_celleb(void);
 void smp_setup_cpu_maps(void);
-void smp_setup_cpu_sibling_map(void);
 
 extern int __cpu_disable(void);
 extern void __cpu_die(unsigned int cpu);
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/thread_info.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/thread_info.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/thread_info.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/thread_info.h	2010-08-01 18:11:14.000000000 -0400
@@ -104,7 +104,7 @@
 #define TIF_PERFMON_CTXSW	6	/* perfmon needs ctxsw calls */
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_SINGLESTEP		8	/* singlestepping active */
-#define TIF_MEMDIE		9
+#define TIF_MEMDIE		9	/* is terminating due to OOM killer */
 #define TIF_SECCOMP		10	/* secure computing */
 #define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
 #define TIF_NOERROR		12	/* Force successful syscall return */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/include/asm/topology.h linux-libre-2.6.35-gnu/arch/powerpc/include/asm/topology.h
--- linux-libre-2.6.34-gnu/arch/powerpc/include/asm/topology.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/include/asm/topology.h	2010-08-01 18:11:14.000000000 -0400
@@ -8,6 +8,26 @@
 
 #ifdef CONFIG_NUMA
 
+/*
+ * Before going off node we want the VM to try and reclaim from the local
+ * node. It does this if the remote distance is larger than RECLAIM_DISTANCE.
+ * With the default REMOTE_DISTANCE of 20 and the default RECLAIM_DISTANCE of
+ * 20, we never reclaim and go off node straight away.
+ *
+ * To fix this we choose a smaller value of RECLAIM_DISTANCE.
+ */
+#define RECLAIM_DISTANCE 10
+
+/*
+ * Before going off node we want the VM to try and reclaim from the local
+ * node. It does this if the remote distance is larger than RECLAIM_DISTANCE.
+ * With the default REMOTE_DISTANCE of 20 and the default RECLAIM_DISTANCE of
+ * 20, we never reclaim and go off node straight away.
+ *
+ * To fix this we choose a smaller value of RECLAIM_DISTANCE.
+ */
+#define RECLAIM_DISTANCE 10
+
 #include <asm/mmzone.h>
 
 static inline int cpu_to_node(int cpu)
@@ -19,7 +39,7 @@
 
 #define cpumask_of_node(node) ((node) == -1 ?				\
 			       cpu_all_mask :				\
-			       &numa_cpumask_lookup_table[node])
+			       node_to_cpumask_map[node])
 
 int of_node_to_nid(struct device_node *device);
 
@@ -102,8 +122,8 @@
 #ifdef CONFIG_PPC64
 #include <asm/smp.h>
 
-#define topology_thread_cpumask(cpu)	(&per_cpu(cpu_sibling_map, cpu))
-#define topology_core_cpumask(cpu)	(&per_cpu(cpu_core_map, cpu))
+#define topology_thread_cpumask(cpu)	(per_cpu(cpu_sibling_map, cpu))
+#define topology_core_cpumask(cpu)	(per_cpu(cpu_core_map, cpu))
 #define topology_core_id(cpu)		(cpu_to_core_id(cpu))
 #endif
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/Kconfig linux-libre-2.6.35-gnu/arch/powerpc/Kconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -132,7 +132,7 @@
 	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 	select USE_GENERIC_SMP_HELPERS if SMP
@@ -140,6 +140,7 @@
 	select HAVE_SYSCALL_WRAPPERS if PPC64
 	select GENERIC_ATOMIC64 if PPC32
 	select HAVE_PERF_EVENTS
+	select HAVE_REGS_AND_STACK_ACCESS_API
 
 config EARLY_PRINTK
 	bool
@@ -350,7 +351,7 @@
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on PPC_BOOK3S && EXPERIMENTAL
+	depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -399,7 +400,7 @@
 
 config SPARSE_IRQ
 	bool "Support sparse irq numbering"
-	default y
+	default n
 	help
 	  This enables support for sparse irqs. This is useful for distro
 	  kernels that want to define a high CONFIG_NR_CPUS value but still
@@ -408,7 +409,7 @@
 	  ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
 	    out the irq_desc[] array in a more NUMA-friendly way. )
 
-	  If you don't know what to do here, say Y.
+	  If you don't know what to do here, say N.
 
 config NUMA
 	bool "NUMA support"
@@ -662,6 +663,9 @@
 config NEED_DMA_MAP_STATE
 	def_bool (PPC64 || NOT_COHERENT_CACHE)
 
+config NEED_SG_DMA_LENGTH
+	def_bool y
+
 config GENERIC_ISA_DMA
 	bool
 	depends on PPC64 || POWER4 || 6xx && !CPM2
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/Kconfig.debug linux-libre-2.6.35-gnu/arch/powerpc/Kconfig.debug
--- linux-libre-2.6.34-gnu/arch/powerpc/Kconfig.debug	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/Kconfig.debug	2010-08-01 18:11:14.000000000 -0400
@@ -44,6 +44,18 @@
 
 	  This option will slow down process creation somewhat.
 
+config DEBUG_PER_CPU_MAPS
+	bool "Debug access to per_cpu maps"
+	depends on DEBUG_KERNEL
+	depends on SMP
+	default n
+	---help---
+	  Say Y to verify that the per_cpu map being accessed has
+	  been setup.  Adds a fair amount of code to kernel memory
+	  and decreases performance.
+
+	  Say N if unsure.
+
 config HCALL_STATS
 	bool "Hypervisor call instrumentation"
 	depends on PPC_PSERIES && DEBUG_FS && TRACEPOINTS
@@ -123,13 +135,6 @@
 	depends on KGDB || XMON
 	default y
 
-config IRQSTACKS
-	bool "Use separate kernel stacks when processing interrupts"
-	help
-	  If you say Y here the kernel will use separate kernel stacks
-	  for handling hard and soft interrupts.  This can help avoid
-	  overflowing the process kernel stacks.
-
 config VIRQ_DEBUG
 	bool "Expose hardware/virtual IRQ mapping via debugfs"
 	depends on DEBUG_FS
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/asm-offsets.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/asm-offsets.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/asm-offsets.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/asm-offsets.c	2010-08-01 18:11:14.000000000 -0400
@@ -50,6 +50,9 @@
 #endif
 #ifdef CONFIG_KVM
 #include <linux/kvm_host.h>
+#ifndef CONFIG_BOOKE
+#include <asm/kvm_book3s.h>
+#endif
 #endif
 
 #ifdef CONFIG_PPC32
@@ -105,6 +108,9 @@
 	DEFINE(THREAD_USED_SPE, offsetof(struct thread_struct, used_spe));
 #endif /* CONFIG_SPE */
 #endif /* CONFIG_PPC64 */
+#ifdef CONFIG_KVM_BOOK3S_32_HANDLER
+	DEFINE(THREAD_KVM_SVCPU, offsetof(struct thread_struct, kvm_shadow_vcpu));
+#endif
 
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
@@ -183,6 +189,7 @@
 #endif /* CONFIG_PPC_STD_MMU_64 */
 	DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
 	DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
+	DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state));
 	DEFINE(PACA_STARTPURR, offsetof(struct paca_struct, startpurr));
 	DEFINE(PACA_STARTSPURR, offsetof(struct paca_struct, startspurr));
 	DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
@@ -190,33 +197,9 @@
 	DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
 	DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-	DEFINE(PACA_KVM_IN_GUEST, offsetof(struct paca_struct, kvm_in_guest));
-	DEFINE(PACA_KVM_SLB, offsetof(struct paca_struct, kvm_slb));
-	DEFINE(PACA_KVM_SLB_MAX, offsetof(struct paca_struct, kvm_slb_max));
-	DEFINE(PACA_KVM_CR, offsetof(struct paca_struct, shadow_vcpu.cr));
-	DEFINE(PACA_KVM_XER, offsetof(struct paca_struct, shadow_vcpu.xer));
-	DEFINE(PACA_KVM_R0, offsetof(struct paca_struct, shadow_vcpu.gpr[0]));
-	DEFINE(PACA_KVM_R1, offsetof(struct paca_struct, shadow_vcpu.gpr[1]));
-	DEFINE(PACA_KVM_R2, offsetof(struct paca_struct, shadow_vcpu.gpr[2]));
-	DEFINE(PACA_KVM_R3, offsetof(struct paca_struct, shadow_vcpu.gpr[3]));
-	DEFINE(PACA_KVM_R4, offsetof(struct paca_struct, shadow_vcpu.gpr[4]));
-	DEFINE(PACA_KVM_R5, offsetof(struct paca_struct, shadow_vcpu.gpr[5]));
-	DEFINE(PACA_KVM_R6, offsetof(struct paca_struct, shadow_vcpu.gpr[6]));
-	DEFINE(PACA_KVM_R7, offsetof(struct paca_struct, shadow_vcpu.gpr[7]));
-	DEFINE(PACA_KVM_R8, offsetof(struct paca_struct, shadow_vcpu.gpr[8]));
-	DEFINE(PACA_KVM_R9, offsetof(struct paca_struct, shadow_vcpu.gpr[9]));
-	DEFINE(PACA_KVM_R10, offsetof(struct paca_struct, shadow_vcpu.gpr[10]));
-	DEFINE(PACA_KVM_R11, offsetof(struct paca_struct, shadow_vcpu.gpr[11]));
-	DEFINE(PACA_KVM_R12, offsetof(struct paca_struct, shadow_vcpu.gpr[12]));
-	DEFINE(PACA_KVM_R13, offsetof(struct paca_struct, shadow_vcpu.gpr[13]));
-	DEFINE(PACA_KVM_HOST_R1, offsetof(struct paca_struct, shadow_vcpu.host_r1));
-	DEFINE(PACA_KVM_HOST_R2, offsetof(struct paca_struct, shadow_vcpu.host_r2));
-	DEFINE(PACA_KVM_VMHANDLER, offsetof(struct paca_struct,
-					    shadow_vcpu.vmhandler));
-	DEFINE(PACA_KVM_SCRATCH0, offsetof(struct paca_struct,
-					   shadow_vcpu.scratch0));
-	DEFINE(PACA_KVM_SCRATCH1, offsetof(struct paca_struct,
-					   shadow_vcpu.scratch1));
+	DEFINE(PACA_KVM_SVCPU, offsetof(struct paca_struct, shadow_vcpu));
+	DEFINE(SVCPU_SLB, offsetof(struct kvmppc_book3s_shadow_vcpu, slb));
+	DEFINE(SVCPU_SLB_MAX, offsetof(struct kvmppc_book3s_shadow_vcpu, slb_max));
 #endif
 #endif /* CONFIG_PPC64 */
 
@@ -227,8 +210,8 @@
 	/* Interrupt register frame */
 	DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
 	DEFINE(INT_FRAME_SIZE, STACK_INT_FRAME_SIZE);
-#ifdef CONFIG_PPC64
 	DEFINE(SWITCH_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
+#ifdef CONFIG_PPC64
 	/* Create extra stack space for SRR0 and SRR1 when calling prom/rtas. */
 	DEFINE(PROM_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16);
 	DEFINE(RTAS_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16);
@@ -411,9 +394,6 @@
 	DEFINE(VCPU_HOST_STACK, offsetof(struct kvm_vcpu, arch.host_stack));
 	DEFINE(VCPU_HOST_PID, offsetof(struct kvm_vcpu, arch.host_pid));
 	DEFINE(VCPU_GPRS, offsetof(struct kvm_vcpu, arch.gpr));
-	DEFINE(VCPU_LR, offsetof(struct kvm_vcpu, arch.lr));
-	DEFINE(VCPU_CTR, offsetof(struct kvm_vcpu, arch.ctr));
-	DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.pc));
 	DEFINE(VCPU_MSR, offsetof(struct kvm_vcpu, arch.msr));
 	DEFINE(VCPU_SPRG4, offsetof(struct kvm_vcpu, arch.sprg4));
 	DEFINE(VCPU_SPRG5, offsetof(struct kvm_vcpu, arch.sprg5));
@@ -421,32 +401,81 @@
 	DEFINE(VCPU_SPRG7, offsetof(struct kvm_vcpu, arch.sprg7));
 	DEFINE(VCPU_SHADOW_PID, offsetof(struct kvm_vcpu, arch.shadow_pid));
 
-	DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst));
-	DEFINE(VCPU_FAULT_DEAR, offsetof(struct kvm_vcpu, arch.fault_dear));
-	DEFINE(VCPU_FAULT_ESR, offsetof(struct kvm_vcpu, arch.fault_esr));
-
-	/* book3s_64 */
-#ifdef CONFIG_PPC64
-	DEFINE(VCPU_FAULT_DSISR, offsetof(struct kvm_vcpu, arch.fault_dsisr));
+	/* book3s */
+#ifdef CONFIG_PPC_BOOK3S
 	DEFINE(VCPU_HOST_RETIP, offsetof(struct kvm_vcpu, arch.host_retip));
-	DEFINE(VCPU_HOST_R2, offsetof(struct kvm_vcpu, arch.host_r2));
 	DEFINE(VCPU_HOST_MSR, offsetof(struct kvm_vcpu, arch.host_msr));
 	DEFINE(VCPU_SHADOW_MSR, offsetof(struct kvm_vcpu, arch.shadow_msr));
-	DEFINE(VCPU_SHADOW_SRR1, offsetof(struct kvm_vcpu, arch.shadow_srr1));
 	DEFINE(VCPU_TRAMPOLINE_LOWMEM, offsetof(struct kvm_vcpu, arch.trampoline_lowmem));
 	DEFINE(VCPU_TRAMPOLINE_ENTER, offsetof(struct kvm_vcpu, arch.trampoline_enter));
 	DEFINE(VCPU_HIGHMEM_HANDLER, offsetof(struct kvm_vcpu, arch.highmem_handler));
 	DEFINE(VCPU_RMCALL, offsetof(struct kvm_vcpu, arch.rmcall));
 	DEFINE(VCPU_HFLAGS, offsetof(struct kvm_vcpu, arch.hflags));
+	DEFINE(VCPU_SVCPU, offsetof(struct kvmppc_vcpu_book3s, shadow_vcpu) -
+			   offsetof(struct kvmppc_vcpu_book3s, vcpu));
+	DEFINE(SVCPU_CR, offsetof(struct kvmppc_book3s_shadow_vcpu, cr));
+	DEFINE(SVCPU_XER, offsetof(struct kvmppc_book3s_shadow_vcpu, xer));
+	DEFINE(SVCPU_CTR, offsetof(struct kvmppc_book3s_shadow_vcpu, ctr));
+	DEFINE(SVCPU_LR, offsetof(struct kvmppc_book3s_shadow_vcpu, lr));
+	DEFINE(SVCPU_PC, offsetof(struct kvmppc_book3s_shadow_vcpu, pc));
+	DEFINE(SVCPU_R0, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[0]));
+	DEFINE(SVCPU_R1, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[1]));
+	DEFINE(SVCPU_R2, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[2]));
+	DEFINE(SVCPU_R3, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[3]));
+	DEFINE(SVCPU_R4, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[4]));
+	DEFINE(SVCPU_R5, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[5]));
+	DEFINE(SVCPU_R6, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[6]));
+	DEFINE(SVCPU_R7, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[7]));
+	DEFINE(SVCPU_R8, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[8]));
+	DEFINE(SVCPU_R9, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[9]));
+	DEFINE(SVCPU_R10, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[10]));
+	DEFINE(SVCPU_R11, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[11]));
+	DEFINE(SVCPU_R12, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[12]));
+	DEFINE(SVCPU_R13, offsetof(struct kvmppc_book3s_shadow_vcpu, gpr[13]));
+	DEFINE(SVCPU_HOST_R1, offsetof(struct kvmppc_book3s_shadow_vcpu, host_r1));
+	DEFINE(SVCPU_HOST_R2, offsetof(struct kvmppc_book3s_shadow_vcpu, host_r2));
+	DEFINE(SVCPU_VMHANDLER, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					 vmhandler));
+	DEFINE(SVCPU_SCRATCH0, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					scratch0));
+	DEFINE(SVCPU_SCRATCH1, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					scratch1));
+	DEFINE(SVCPU_IN_GUEST, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					in_guest));
+	DEFINE(SVCPU_FAULT_DSISR, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					   fault_dsisr));
+	DEFINE(SVCPU_FAULT_DAR, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					 fault_dar));
+	DEFINE(SVCPU_LAST_INST, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					 last_inst));
+	DEFINE(SVCPU_SHADOW_SRR1, offsetof(struct kvmppc_book3s_shadow_vcpu,
+					   shadow_srr1));
+#ifdef CONFIG_PPC_BOOK3S_32
+	DEFINE(SVCPU_SR, offsetof(struct kvmppc_book3s_shadow_vcpu, sr));
+#endif
 #else
 	DEFINE(VCPU_CR, offsetof(struct kvm_vcpu, arch.cr));
 	DEFINE(VCPU_XER, offsetof(struct kvm_vcpu, arch.xer));
-#endif /* CONFIG_PPC64 */
+	DEFINE(VCPU_LR, offsetof(struct kvm_vcpu, arch.lr));
+	DEFINE(VCPU_CTR, offsetof(struct kvm_vcpu, arch.ctr));
+	DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.pc));
+	DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst));
+	DEFINE(VCPU_FAULT_DEAR, offsetof(struct kvm_vcpu, arch.fault_dear));
+	DEFINE(VCPU_FAULT_ESR, offsetof(struct kvm_vcpu, arch.fault_esr));
+#endif /* CONFIG_PPC_BOOK3S */
 #endif
 #ifdef CONFIG_44x
 	DEFINE(PGD_T_LOG2, PGD_T_LOG2);
 	DEFINE(PTE_T_LOG2, PTE_T_LOG2);
 #endif
+#ifdef CONFIG_FSL_BOOKE
+	DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
+	DEFINE(TLBCAM_MAS0, offsetof(struct tlbcam, MAS0));
+	DEFINE(TLBCAM_MAS1, offsetof(struct tlbcam, MAS1));
+	DEFINE(TLBCAM_MAS2, offsetof(struct tlbcam, MAS2));
+	DEFINE(TLBCAM_MAS3, offsetof(struct tlbcam, MAS3));
+	DEFINE(TLBCAM_MAS7, offsetof(struct tlbcam, MAS7));
+#endif
 
 #ifdef CONFIG_KVM_EXIT_TIMING
 	DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu,
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/btext.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/btext.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/btext.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/btext.c	2010-08-01 18:11:14.000000000 -0400
@@ -7,7 +7,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/sections.h>
 #include <asm/prom.h>
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/cputable.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/cputable.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/cputable.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/cputable.c	2010-08-01 18:11:14.000000000 -0400
@@ -1701,6 +1701,35 @@
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
+	{ /* 476 core */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x11a50000,
+		.cpu_name		= "476",
+		.cpu_features		= CPU_FTRS_47X,
+		.cpu_user_features	= COMMON_USER_BOOKE |
+			PPC_FEATURE_HAS_FPU,
+		.mmu_features		= MMU_FTR_TYPE_47x |
+			MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 128,
+		.machine_check		= machine_check_47x,
+		.platform		= "ppc470",
+	},
+	{ /* 476 iss */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x00050000,
+		.cpu_name		= "476",
+		.cpu_features		= CPU_FTRS_47X,
+		.cpu_user_features	= COMMON_USER_BOOKE |
+			PPC_FEATURE_HAS_FPU,
+		.cpu_user_features	= COMMON_USER_BOOKE,
+		.mmu_features		= MMU_FTR_TYPE_47x |
+			MMU_FTR_USE_TLBIVAX_BCAST | MMU_FTR_LOCK_BCAST_INVAL,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 128,
+		.machine_check		= machine_check_47x,
+		.platform		= "ppc470",
+	},
 	{	/* default match */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
@@ -1811,7 +1840,7 @@
 		.oprofile_cpu_type	= "ppc/e500mc",
 		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
 		.cpu_setup		= __setup_cpu_e500mc,
-		.machine_check		= machine_check_e500,
+		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce500mc",
 	},
 	{	/* default match */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/crash.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/crash.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/crash.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/crash.c	2010-08-01 18:11:14.000000000 -0400
@@ -24,7 +24,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/types.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/machdep.h>
@@ -162,6 +162,34 @@
 	/* Leave the IPI callback set */
 }
 
+/* wait for all the CPUs to hit real mode but timeout if they don't come in */
+#ifdef CONFIG_PPC_STD_MMU_64
+static void crash_kexec_wait_realmode(int cpu)
+{
+	unsigned int msecs;
+	int i;
+
+	msecs = 10000;
+	for (i=0; i < NR_CPUS && msecs > 0; i++) {
+		if (i == cpu)
+			continue;
+
+		while (paca[i].kexec_state < KEXEC_STATE_REAL_MODE) {
+			barrier();
+			if (!cpu_possible(i)) {
+				break;
+			}
+			if (!cpu_online(i)) {
+				break;
+			}
+			msecs--;
+			mdelay(1);
+		}
+	}
+	mb();
+}
+#endif
+
 /*
  * This function will be called by secondary cpus or by kexec cpu
  * if soft-reset is activated to stop some CPUs.
@@ -347,10 +375,12 @@
 EXPORT_SYMBOL(crash_shutdown_unregister);
 
 static unsigned long crash_shutdown_buf[JMP_BUF_LEN];
+static int crash_shutdown_cpu = -1;
 
 static int handle_fault(struct pt_regs *regs)
 {
-	longjmp(crash_shutdown_buf, 1);
+	if (crash_shutdown_cpu == smp_processor_id())
+		longjmp(crash_shutdown_buf, 1);
 	return 0;
 }
 
@@ -375,11 +405,14 @@
 	for_each_irq(i) {
 		struct irq_desc *desc = irq_to_desc(i);
 
+		if (!desc || !desc->chip || !desc->chip->eoi)
+			continue;
+
 		if (desc->status & IRQ_INPROGRESS)
 			desc->chip->eoi(i);
 
 		if (!(desc->status & IRQ_DISABLED))
-			desc->chip->disable(i);
+			desc->chip->shutdown(i);
 	}
 
 	/*
@@ -388,6 +421,7 @@
 	 */
 	old_handler = __debugger_fault_handler;
 	__debugger_fault_handler = handle_fault;
+	crash_shutdown_cpu = smp_processor_id();
 	for (i = 0; crash_shutdown_handles[i]; i++) {
 		if (setjmp(crash_shutdown_buf) == 0) {
 			/*
@@ -401,6 +435,7 @@
 			asm volatile("sync; isync");
 		}
 	}
+	crash_shutdown_cpu = -1;
 	__debugger_fault_handler = old_handler;
 
 	/*
@@ -412,6 +447,9 @@
 	crash_kexec_prepare_cpus(crashing_cpu);
 	cpu_set(crashing_cpu, cpus_in_crash);
 	crash_kexec_stop_spus();
+#if defined(CONFIG_PPC_STD_MMU_64) && defined(CONFIG_SMP)
+	crash_kexec_wait_realmode(crashing_cpu);
+#endif
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(1, 0);
 }
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/crash_dump.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/crash_dump.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/crash_dump.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/crash_dump.c	2010-08-01 18:11:14.000000000 -0400
@@ -13,7 +13,7 @@
 
 #include <linux/crash_dump.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/code-patching.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -33,7 +33,7 @@
 #ifndef CONFIG_RELOCATABLE
 void __init reserve_kdump_trampoline(void)
 {
-	lmb_reserve(0, KDUMP_RESERVE_LIMIT);
+	memblock_reserve(0, KDUMP_RESERVE_LIMIT);
 }
 
 static void __init create_trampoline(unsigned long addr)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/dma.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/dma.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/dma.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/dma.c	2010-08-01 18:11:14.000000000 -0400
@@ -9,7 +9,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dma-debug.h>
 #include <linux/gfp.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/bug.h>
 #include <asm/abs_addr.h>
 
@@ -89,7 +89,7 @@
 	/* Could be improved so platforms can set the limit in case
 	 * they have limited DMA windows
 	 */
-	return mask >= (lmb_end_of_DRAM() - 1);
+	return mask >= (memblock_end_of_DRAM() - 1);
 #else
 	return 1;
 #endif
@@ -127,11 +127,11 @@
 		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
 }
 
-static inline void dma_direct_sync_single_range(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
+static inline void dma_direct_sync_single(struct device *dev,
+					  dma_addr_t dma_handle, size_t size,
+					  enum dma_data_direction direction)
 {
-	__dma_sync(bus_to_virt(dma_handle+offset), size, direction);
+	__dma_sync(bus_to_virt(dma_handle), size, direction);
 }
 #endif
 
@@ -144,8 +144,8 @@
 	.map_page	= dma_direct_map_page,
 	.unmap_page	= dma_direct_unmap_page,
 #ifdef CONFIG_NOT_COHERENT_CACHE
-	.sync_single_range_for_cpu 	= dma_direct_sync_single_range,
-	.sync_single_range_for_device 	= dma_direct_sync_single_range,
+	.sync_single_for_cpu 		= dma_direct_sync_single,
+	.sync_single_for_device 	= dma_direct_sync_single,
 	.sync_sg_for_cpu 		= dma_direct_sync_sg,
 	.sync_sg_for_device 		= dma_direct_sync_sg,
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/dma-swiotlb.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/dma-swiotlb.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/dma-swiotlb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/dma-swiotlb.c	2010-08-01 18:11:14.000000000 -0400
@@ -39,8 +39,8 @@
 	.dma_supported = swiotlb_dma_supported,
 	.map_page = swiotlb_map_page,
 	.unmap_page = swiotlb_unmap_page,
-	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
-	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
+	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+	.sync_single_for_device = swiotlb_sync_single_for_device,
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
 	.sync_sg_for_device = swiotlb_sync_sg_for_device,
 	.mapping_error = swiotlb_dma_mapping_error,
@@ -71,7 +71,7 @@
 	sd->max_direct_dma_addr = 0;
 
 	/* May need to bounce if the device can't address all of DRAM */
-	if ((dma_get_mask(dev) + 1) < lmb_end_of_DRAM())
+	if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM())
 		set_dma_ops(dev, &swiotlb_dma_ops);
 
 	return NOTIFY_DONE;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/entry_32.S linux-libre-2.6.35-gnu/arch/powerpc/kernel/entry_32.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/entry_32.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/entry_32.S	2010-08-01 18:11:14.000000000 -0400
@@ -373,11 +373,13 @@
 	bnel-	load_dbcr0
 #endif
 #ifdef CONFIG_44x
+BEGIN_MMU_FTR_SECTION
 	lis	r4,icache_44x_need_flush@ha
 	lwz	r5,icache_44x_need_flush@l(r4)
 	cmplwi	cr0,r5,0
 	bne-	2f
 1:
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_47x)
 #endif /* CONFIG_44x */
 BEGIN_FTR_SECTION
 	lwarx	r7,0,r1
@@ -848,6 +850,9 @@
 	/* interrupts are hard-disabled at this point */
 restore:
 #ifdef CONFIG_44x
+BEGIN_MMU_FTR_SECTION
+	b	1f
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
 	lis	r4,icache_44x_need_flush@ha
 	lwz	r5,icache_44x_need_flush@l(r4)
 	cmplwi	cr0,r5,0
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/exceptions-64s.S linux-libre-2.6.35-gnu/arch/powerpc/kernel/exceptions-64s.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/exceptions-64s.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/exceptions-64s.S	2010-08-01 18:11:14.000000000 -0400
@@ -735,8 +735,11 @@
 	std	r3,_DAR(r1)
 	std	r4,_DSISR(r1)
 
-	andis.	r0,r4,0xa450		/* weird error? */
+	andis.	r0,r4,0xa410		/* weird error? */
 	bne-	handle_page_fault	/* if not, try to insert a HPTE */
+	andis.  r0,r4,DSISR_DABRMATCH@h
+	bne-    handle_dabr_fault
+
 BEGIN_FTR_SECTION
 	andis.	r0,r4,0x0020		/* Is it a segment table fault? */
 	bne-	do_ste_alloc		/* If so handle it */
@@ -823,6 +826,14 @@
 	bl	.raw_local_irq_restore
 	b	11f
 
+/* We have a data breakpoint exception - handle it */
+handle_dabr_fault:
+	ld      r4,_DAR(r1)
+	ld      r5,_DSISR(r1)
+	addi    r3,r1,STACK_FRAME_OVERHEAD
+	bl      .do_dabr
+	b       .ret_from_except_lite
+
 /* Here we have a page fault that hash_page can't handle. */
 handle_page_fault:
 	ENABLE_INTS
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/fsl_booke_entry_mapping.S linux-libre-2.6.35-gnu/arch/powerpc/kernel/fsl_booke_entry_mapping.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/fsl_booke_entry_mapping.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/fsl_booke_entry_mapping.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,235 @@
+
+/* 1. Find the index of the entry we're executing in */
+	bl	invstr				/* Find our address */
+invstr:	mflr	r6				/* Make it accessible */
+	mfmsr	r7
+	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
+	mfspr	r7, SPRN_PID0
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+
+	mfspr	r7,SPRN_MMUCFG
+	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
+	cmpwi	r7,3
+	bne	match_TLB			/* skip if NPIDS != 3 */
+
+	mfspr	r7,SPRN_PID1
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
+	mfspr	r7,SPRN_MAS1
+	andis.	r7,r7,MAS1_VALID@h
+	bne	match_TLB
+	mfspr	r7, SPRN_PID2
+	slwi	r7,r7,16
+	or	r7,r7,r4
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* Fall through, we had to match */
+
+match_TLB:
+	mfspr	r7,SPRN_MAS0
+	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
+
+	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
+	oris	r7,r7,MAS1_IPROT@h
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in */
+	mfspr	r9,SPRN_TLB1CFG
+	andi.	r9,r9,0xfff
+	li	r6,0				/* Set Entry counter to 0 */
+1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r7,SPRN_MAS1
+	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
+	cmpw	r3,r6
+	beq	skpinv				/* Dont update the current execution TLB */
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+	isync
+skpinv:	addi	r6,r6,1				/* Increment */
+	cmpw	r6,r9				/* Are we done? */
+	bne	1b				/* If not, repeat */
+
+	/* Invalidate TLB0 */
+	li	r6,0x04
+	tlbivax 0,r6
+	TLBSYNC
+	/* Invalidate TLB1 */
+	li	r6,0x0c
+	tlbivax 0,r6
+	TLBSYNC
+
+/* 3. Setup a temp mapping and jump to it */
+	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
+	addi	r5, r5, 0x1
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+
+	/* grab and fixup the RPN */
+	mfspr	r6,SPRN_MAS1	/* extract MAS1[SIZE] */
+	rlwinm	r6,r6,25,27,31
+	li	r8,-1
+	addi	r6,r6,10
+	slw	r6,r8,r6	/* convert to mask */
+
+	bl	1f		/* Find our address */
+1:	mflr	r7
+
+	mfspr	r8,SPRN_MAS3
+#ifdef CONFIG_PHYS_64BIT
+	mfspr	r23,SPRN_MAS7
+#endif
+	and	r8,r6,r8
+	subfic	r9,r6,-4096
+	and	r9,r9,r7
+
+	or	r25,r8,r9
+	ori	r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
+
+	/* Just modify the entry ID and EPN for the temp mapping */
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+	mtspr	SPRN_MAS0,r7
+	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
+	slwi	r6,r6,12
+	oris	r6,r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
+	mtspr	SPRN_MAS1,r6
+	mfspr	r6,SPRN_MAS2
+	li	r7,0		/* temp EPN = 0 */
+	rlwimi	r7,r6,0,20,31
+	mtspr	SPRN_MAS2,r7
+	mtspr	SPRN_MAS3,r8
+	tlbwe
+
+	xori	r6,r4,1
+	slwi	r6,r6,5		/* setup new context with other address space */
+	bl	1f		/* Find our address */
+1:	mflr	r9
+	rlwimi	r7,r9,0,20,31
+	addi	r7,r7,(2f - 1b)
+	mtspr	SPRN_SRR0,r7
+	mtspr	SPRN_SRR1,r6
+	rfi
+2:
+/* 4. Clear out PIDs & Search info */
+	li	r6,0
+	mtspr   SPRN_MAS6,r6
+	mtspr	SPRN_PID0,r6
+
+	mfspr	r7,SPRN_MMUCFG
+	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
+	cmpwi	r7,3
+	bne	2f				/* skip if NPIDS != 3 */
+
+	mtspr	SPRN_PID1,r6
+	mtspr	SPRN_PID2,r6
+
+/* 5. Invalidate mapping we started in */
+2:
+	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r6,SPRN_MAS1
+	rlwinm	r6,r6,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r6
+	tlbwe
+	/* Invalidate TLB1 */
+	li	r9,0x0c
+	tlbivax 0,r9
+	TLBSYNC
+
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP	MAS2_M
+#else
+#define M_IF_SMP	0
+#endif
+
+#if defined(ENTRY_MAPPING_BOOT_SETUP)
+
+/* 6. Setup KERNELBASE mapping in TLB1[0] */
+	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
+	mtspr	SPRN_MAS0,r6
+	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
+	mtspr	SPRN_MAS1,r6
+	lis	r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
+	ori	r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
+	mtspr	SPRN_MAS2,r6
+	mtspr	SPRN_MAS3,r8
+	tlbwe
+
+/* 7. Jump to KERNELBASE mapping */
+	lis	r6,(KERNELBASE & ~0xfff)@h
+	ori	r6,r6,(KERNELBASE & ~0xfff)@l
+
+#elif defined(ENTRY_MAPPING_KEXEC_SETUP)
+/*
+ * 6. Setup a 1:1 mapping in TLB1. Esel 0 is unsued, 1 or 2 contains the tmp
+ * mapping so we start at 3. We setup 8 mappings, each 256MiB in size. This
+ * will cover the first 2GiB of memory.
+ */
+
+	lis r10, (MAS1_VALID|MAS1_IPROT)@h
+	ori r10,r10, (MAS1_TSIZE(BOOK3E_PAGESZ_256M))@l
+	li  r11, 0
+	li  r0, 8
+	mtctr   r0
+
+next_tlb_setup:
+	addi	r0, r11, 3
+	rlwinm  r0, r0, 16, 4, 15  // Compute esel
+	rlwinm  r9, r11, 28, 0, 3   // Compute [ER]PN
+	oris    r0, r0, (MAS0_TLBSEL(1))@h
+	mtspr   SPRN_MAS0,r0
+	mtspr   SPRN_MAS1,r10
+	mtspr   SPRN_MAS2,r9
+	ori r9, r9, (MAS3_SX|MAS3_SW|MAS3_SR)
+	mtspr   SPRN_MAS3,r9
+	tlbwe
+	addi    r11, r11, 1
+	bdnz+   next_tlb_setup
+
+/* 7. Jump to our 1:1 mapping */
+	mr	r6, r25
+#else
+	#error You need to specify the mapping or not use this at all.
+#endif
+
+	lis	r7,MSR_KERNEL@h
+	ori	r7,r7,MSR_KERNEL@l
+	bl	1f			/* Find our address */
+1:	mflr	r9
+	rlwimi	r6,r9,0,20,31
+	addi	r6,r6,(2f - 1b)
+	mtspr	SPRN_SRR0,r6
+	mtspr	SPRN_SRR1,r7
+	rfi				/* start execution out of TLB1[0] entry */
+
+/* 8. Clear out the temp mapping */
+2:	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r8,SPRN_MAS1
+	rlwinm	r8,r8,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r8
+	tlbwe
+	/* Invalidate TLB1 */
+	li	r9,0x0c
+	tlbivax 0,r9
+	TLBSYNC
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/head_32.S linux-libre-2.6.35-gnu/arch/powerpc/kernel/head_32.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/head_32.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/head_32.S	2010-08-01 18:11:14.000000000 -0400
@@ -33,6 +33,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/ptrace.h>
 #include <asm/bug.h>
+#include <asm/kvm_book3s_asm.h>
 
 /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
 #define LOAD_BAT(n, reg, RA, RB)	\
@@ -303,6 +304,7 @@
  */
 #define EXCEPTION(n, label, hdlr, xfer)		\
 	. = n;					\
+	DO_KVM n;				\
 label:						\
 	EXCEPTION_PROLOG;			\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
@@ -358,6 +360,7 @@
  *	-- paulus.
  */
 	. = 0x200
+	DO_KVM  0x200
 	mtspr	SPRN_SPRG_SCRATCH0,r10
 	mtspr	SPRN_SPRG_SCRATCH1,r11
 	mfcr	r10
@@ -381,6 +384,7 @@
 
 /* Data access exception. */
 	. = 0x300
+	DO_KVM  0x300
 DataAccess:
 	EXCEPTION_PROLOG
 	mfspr	r10,SPRN_DSISR
@@ -397,6 +401,7 @@
 
 /* Instruction access exception. */
 	. = 0x400
+	DO_KVM  0x400
 InstructionAccess:
 	EXCEPTION_PROLOG
 	andis.	r0,r9,0x4000		/* no pte found? */
@@ -413,6 +418,7 @@
 
 /* Alignment exception */
 	. = 0x600
+	DO_KVM  0x600
 Alignment:
 	EXCEPTION_PROLOG
 	mfspr	r4,SPRN_DAR
@@ -427,6 +433,7 @@
 
 /* Floating-point unavailable */
 	. = 0x800
+	DO_KVM  0x800
 FPUnavailable:
 BEGIN_FTR_SECTION
 /*
@@ -450,6 +457,7 @@
 
 /* System call */
 	. = 0xc00
+	DO_KVM  0xc00
 SystemCall:
 	EXCEPTION_PROLOG
 	EXC_XFER_EE_LITE(0xc00, DoSyscall)
@@ -467,9 +475,11 @@
  * by executing an altivec instruction.
  */
 	. = 0xf00
+	DO_KVM  0xf00
 	b	PerformanceMonitor
 
 	. = 0xf20
+	DO_KVM  0xf20
 	b	AltiVecUnavailable
 
 /*
@@ -882,6 +892,10 @@
 	RFI
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_KVM_BOOK3S_HANDLER
+#include "../kvm/book3s_rmhandlers.S"
+#endif
+
 /*
  * Those generic dummy functions are kept for CPUs not
  * included in CONFIG_6xx
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/head_44x.S linux-libre-2.6.35-gnu/arch/powerpc/kernel/head_44x.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/head_44x.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/head_44x.S	2010-08-01 18:11:14.000000000 -0400
@@ -37,6 +37,7 @@
 #include <asm/thread_info.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/synch.h>
 #include "head_booke.h"
 
 
@@ -69,165 +70,7 @@
 	mr	r27,r7
 	li	r24,0		/* CPU number */
 
-/*
- * In case the firmware didn't do it, we apply some workarounds
- * that are good for all 440 core variants here
- */
-	mfspr	r3,SPRN_CCR0
-	rlwinm	r3,r3,0,0,27	/* disable icache prefetch */
-	isync
-	mtspr	SPRN_CCR0,r3
-	isync
-	sync
-
-/*
- * Set up the initial MMU state
- *
- * We are still executing code at the virtual address
- * mappings set by the firmware for the base of RAM.
- *
- * We first invalidate all TLB entries but the one
- * we are running from.  We then load the KERNELBASE
- * mappings so we can begin to use kernel addresses
- * natively and so the interrupt vector locations are
- * permanently pinned (necessary since Book E
- * implementations always have translation enabled).
- *
- * TODO: Use the known TLB entry we are running from to
- *	 determine which physical region we are located
- *	 in.  This can be used to determine where in RAM
- *	 (on a shared CPU system) or PCI memory space
- *	 (on a DRAMless system) we are located.
- *       For now, we assume a perfect world which means
- *	 we are located at the base of DRAM (physical 0).
- */
-
-/*
- * Search TLB for entry that we are currently using.
- * Invalidate all entries but the one we are using.
- */
-	/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
-	mfspr	r3,SPRN_PID			/* Get PID */
-	mfmsr	r4				/* Get MSR */
-	andi.	r4,r4,MSR_IS@l			/* TS=1? */
-	beq	wmmucr				/* If not, leave STS=0 */
-	oris	r3,r3,PPC44x_MMUCR_STS@h	/* Set STS=1 */
-wmmucr:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
-	sync
-
-	bl	invstr				/* Find our address */
-invstr:	mflr	r5				/* Make it accessible */
-	tlbsx	r23,0,r5			/* Find entry we are in */
-	li	r4,0				/* Start at TLB entry 0 */
-	li	r3,0				/* Set PAGEID inval value */
-1:	cmpw	r23,r4				/* Is this our entry? */
-	beq	skpinv				/* If so, skip the inval */
-	tlbwe	r3,r4,PPC44x_TLB_PAGEID		/* If not, inval the entry */
-skpinv:	addi	r4,r4,1				/* Increment */
-	cmpwi	r4,64				/* Are we done? */
-	bne	1b				/* If not, repeat */
-	isync					/* If so, context change */
-
-/*
- * Configure and load pinned entry into TLB slot 63.
- */
-
-	lis	r3,PAGE_OFFSET@h
-	ori	r3,r3,PAGE_OFFSET@l
-
-	/* Kernel is at the base of RAM */
-	li r4, 0			/* Load the kernel physical address */
-
-	/* Load the kernel PID = 0 */
-	li	r0,0
-	mtspr	SPRN_PID,r0
-	sync
-
-	/* Initialize MMUCR */
-	li	r5,0
-	mtspr	SPRN_MMUCR,r5
-	sync
-
- 	/* pageid fields */
-	clrrwi	r3,r3,10		/* Mask off the effective page number */
-	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
-
-	/* xlat fields */
-	clrrwi	r4,r4,10		/* Mask off the real page number */
-					/* ERPN is 0 for first 4GB page */
-
-	/* attrib fields */
-	/* Added guarded bit to protect against speculative loads/stores */
-	li	r5,0
-	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
-
-        li      r0,63                    /* TLB slot 63 */
-
-	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
-	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
-	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
-
-	/* Force context change */
-	mfmsr	r0
-	mtspr	SPRN_SRR1, r0
-	lis	r0,3f@h
-	ori	r0,r0,3f@l
-	mtspr	SPRN_SRR0,r0
-	sync
-	rfi
-
-	/* If necessary, invalidate original entry we used */
-3:	cmpwi	r23,63
-	beq	4f
-	li	r6,0
-	tlbwe   r6,r23,PPC44x_TLB_PAGEID
-	isync
-
-4:
-#ifdef CONFIG_PPC_EARLY_DEBUG_44x
-	/* Add UART mapping for early debug. */
-
- 	/* pageid fields */
-	lis	r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
-	ori	r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
-
-	/* xlat fields */
-	lis	r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
-	ori	r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
-
-	/* attrib fields */
-	li	r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
-        li      r0,62                    /* TLB slot 0 */
-
-	tlbwe	r3,r0,PPC44x_TLB_PAGEID
-	tlbwe	r4,r0,PPC44x_TLB_XLAT
-	tlbwe	r5,r0,PPC44x_TLB_ATTRIB
-
-	/* Force context change */
-	isync
-#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
-
-	/* Establish the interrupt vector offsets */
-	SET_IVOR(0,  CriticalInput);
-	SET_IVOR(1,  MachineCheck);
-	SET_IVOR(2,  DataStorage);
-	SET_IVOR(3,  InstructionStorage);
-	SET_IVOR(4,  ExternalInput);
-	SET_IVOR(5,  Alignment);
-	SET_IVOR(6,  Program);
-	SET_IVOR(7,  FloatingPointUnavailable);
-	SET_IVOR(8,  SystemCall);
-	SET_IVOR(9,  AuxillaryProcessorUnavailable);
-	SET_IVOR(10, Decrementer);
-	SET_IVOR(11, FixedIntervalTimer);
-	SET_IVOR(12, WatchdogTimer);
-	SET_IVOR(13, DataTLBError);
-	SET_IVOR(14, InstructionTLBError);
-	SET_IVOR(15, DebugCrit);
-
-	/* Establish the interrupt vector base */
-	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
-	mtspr	SPRN_IVPR,r4
+	bl	init_cpu_state
 
 	/*
 	 * This is where the main kernel code starts.
@@ -349,7 +192,7 @@
 #endif
 
 	/* Data TLB Error Interrupt */
-	START_EXCEPTION(DataTLBError)
+	START_EXCEPTION(DataTLBError44x)
 	mtspr	SPRN_SPRG_WSCRATCH0, r10		/* Save some working registers */
 	mtspr	SPRN_SPRG_WSCRATCH1, r11
 	mtspr	SPRN_SPRG_WSCRATCH2, r12
@@ -440,7 +283,7 @@
 	mfspr	r10,SPRN_DEAR
 
 	 /* Jump to common tlb load */
-	b	finish_tlb_load
+	b	finish_tlb_load_44x
 
 2:
 	/* The bailout.  Restore registers to pre-exception conditions
@@ -460,7 +303,7 @@
 	 * information from different registers and bailout
 	 * to a different point.
 	 */
-	START_EXCEPTION(InstructionTLBError)
+	START_EXCEPTION(InstructionTLBError44x)
 	mtspr	SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
 	mtspr	SPRN_SPRG_WSCRATCH1, r11
 	mtspr	SPRN_SPRG_WSCRATCH2, r12
@@ -536,7 +379,7 @@
 	mfspr	r10,SPRN_SRR0
 
 	/* Jump to common TLB load point */
-	b	finish_tlb_load
+	b	finish_tlb_load_44x
 
 2:
 	/* The bailout.  Restore registers to pre-exception conditions
@@ -550,15 +393,7 @@
 	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	b	InstructionStorage
 
-	/* Debug Interrupt */
-	DEBUG_CRIT_EXCEPTION
-
-/*
- * Local functions
-  */
-
 /*
-
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
  * 	r10 - EA of fault
@@ -568,7 +403,7 @@
  *	MMUCR - loaded with proper value when we get here
  *	Upon exit, we reload everything and RFI.
  */
-finish_tlb_load:
+finish_tlb_load_44x:
 	/* Combine RPN & ERPN an write WS 0 */
 	rlwimi	r11,r12,0,0,31-PAGE_SHIFT
 	tlbwe	r11,r13,PPC44x_TLB_XLAT
@@ -601,6 +436,227 @@
 	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	rfi					/* Force context change */
 
+/* TLB error interrupts for 476
+ */
+#ifdef CONFIG_PPC_47x
+	START_EXCEPTION(DataTLBError47x)
+	mtspr	SPRN_SPRG_WSCRATCH0,r10	/* Save some working registers */
+	mtspr	SPRN_SPRG_WSCRATCH1,r11
+	mtspr	SPRN_SPRG_WSCRATCH2,r12
+	mtspr	SPRN_SPRG_WSCRATCH3,r13
+	mfcr	r11
+	mtspr	SPRN_SPRG_WSCRATCH4,r11
+	mfspr	r10,SPRN_DEAR		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11,PAGE_OFFSET@h
+	cmplw	cr0,r10,r11
+	blt+	3f
+	lis	r11,swapper_pg_dir@h
+	ori	r11,r11, swapper_pg_dir@l
+	li	r12,0			/* MMUCR = 0 */
+	b	4f
+
+	/* Get the PGD for the current thread and setup MMUCR */
+3:	mfspr	r11,SPRN_SPRG3
+	lwz	r11,PGDIR(r11)
+	mfspr   r12,SPRN_PID		/* Get PID */
+4:	mtspr	SPRN_MMUCR,r12		/* Set MMUCR */
+
+	/* Mask of required permission bits. Note that while we
+	 * do copy ESR:ST to _PAGE_RW position as trying to write
+	 * to an RO page is pretty common, we don't do it with
+	 * _PAGE_DIRTY. We could do it, but it's a fairly rare
+	 * event so I'd rather take the overhead when it happens
+	 * rather than adding an instruction here. We should measure
+	 * whether the whole thing is worth it in the first place
+	 * as we could avoid loading SPRN_ESR completely in the first
+	 * place...
+	 *
+	 * TODO: Is it worth doing that mfspr & rlwimi in the first
+	 *       place or can we save a couple of instructions here ?
+	 */
+	mfspr	r12,SPRN_ESR
+	li	r13,_PAGE_PRESENT|_PAGE_ACCESSED
+	rlwimi	r13,r12,10,30,30
+
+	/* Load the PTE */
+	/* Compute pgdir/pmd offset */
+	rlwinm  r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29
+	lwzx	r11,r12,r11		/* Get pgd/pmd entry */
+
+	/* Word 0 is EPN,V,TS,DSIZ */
+	li	r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE
+	rlwimi	r10,r12,0,32-PAGE_SHIFT,31	/* Insert valid and page size*/
+	li	r12,0
+	tlbwe	r10,r12,0
+
+	/* XXX can we do better ? Need to make sure tlbwe has established
+	 * latch V bit in MMUCR0 before the PTE is loaded further down */
+#ifdef CONFIG_SMP
+	isync
+#endif
+
+	rlwinm.	r12,r11,0,0,20		/* Extract pt base address */
+	/* Compute pte address */
+	rlwimi  r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28
+	beq	2f			/* Bail if no table */
+	lwz	r11,0(r12)		/* Get high word of pte entry */
+
+	/* XXX can we do better ? maybe insert a known 0 bit from r11 into the
+	 * bottom of r12 to create a data dependency... We can also use r10
+	 * as destination nowadays
+	 */
+#ifdef CONFIG_SMP
+	lwsync
+#endif
+	lwz	r12,4(r12)		/* Get low word of pte entry */
+
+	andc.	r13,r13,r12		/* Check permission */
+
+	 /* Jump to common tlb load */
+	beq	finish_tlb_load_47x
+
+2:	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11,SPRN_SPRG_RSCRATCH4
+	mtcr	r11
+	mfspr	r13,SPRN_SPRG_RSCRATCH3
+	mfspr	r12,SPRN_SPRG_RSCRATCH2
+	mfspr	r11,SPRN_SPRG_RSCRATCH1
+	mfspr	r10,SPRN_SPRG_RSCRATCH0
+	b	DataStorage
+
+	/* Instruction TLB Error Interrupt */
+	/*
+	 * Nearly the same as above, except we get our
+	 * information from different registers and bailout
+	 * to a different point.
+	 */
+	START_EXCEPTION(InstructionTLBError47x)
+	mtspr	SPRN_SPRG_WSCRATCH0,r10	/* Save some working registers */
+	mtspr	SPRN_SPRG_WSCRATCH1,r11
+	mtspr	SPRN_SPRG_WSCRATCH2,r12
+	mtspr	SPRN_SPRG_WSCRATCH3,r13
+	mfcr	r11
+	mtspr	SPRN_SPRG_WSCRATCH4,r11
+	mfspr	r10,SPRN_SRR0		/* Get faulting address */
+
+	/* If we are faulting a kernel address, we have to use the
+	 * kernel page tables.
+	 */
+	lis	r11,PAGE_OFFSET@h
+	cmplw	cr0,r10,r11
+	blt+	3f
+	lis	r11,swapper_pg_dir@h
+	ori	r11,r11, swapper_pg_dir@l
+	li	r12,0			/* MMUCR = 0 */
+	b	4f
+
+	/* Get the PGD for the current thread and setup MMUCR */
+3:	mfspr	r11,SPRN_SPRG_THREAD
+	lwz	r11,PGDIR(r11)
+	mfspr   r12,SPRN_PID		/* Get PID */
+4:	mtspr	SPRN_MMUCR,r12		/* Set MMUCR */
+
+	/* Make up the required permissions */
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+
+	/* Load PTE */
+	/* Compute pgdir/pmd offset */
+	rlwinm  r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29
+	lwzx	r11,r12,r11		/* Get pgd/pmd entry */
+
+	/* Word 0 is EPN,V,TS,DSIZ */
+	li	r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE
+	rlwimi	r10,r12,0,32-PAGE_SHIFT,31	/* Insert valid and page size*/
+	li	r12,0
+	tlbwe	r10,r12,0
+
+	/* XXX can we do better ? Need to make sure tlbwe has established
+	 * latch V bit in MMUCR0 before the PTE is loaded further down */
+#ifdef CONFIG_SMP
+	isync
+#endif
+
+	rlwinm.	r12,r11,0,0,20		/* Extract pt base address */
+	/* Compute pte address */
+	rlwimi  r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28
+	beq	2f			/* Bail if no table */
+
+	lwz	r11,0(r12)		/* Get high word of pte entry */
+	/* XXX can we do better ? maybe insert a known 0 bit from r11 into the
+	 * bottom of r12 to create a data dependency... We can also use r10
+	 * as destination nowadays
+	 */
+#ifdef CONFIG_SMP
+	lwsync
+#endif
+	lwz	r12,4(r12)		/* Get low word of pte entry */
+
+	andc.	r13,r13,r12		/* Check permission */
+
+	/* Jump to common TLB load point */
+	beq	finish_tlb_load_47x
+
+2:	/* The bailout.  Restore registers to pre-exception conditions
+	 * and call the heavyweights to help us out.
+	 */
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
+	b	InstructionStorage
+
+/*
+ * Both the instruction and data TLB miss get to this
+ * point to load the TLB.
+ * 	r10 - free to use
+ * 	r11 - PTE high word value
+ *	r12 - PTE low word value
+ *      r13 - free to use
+ *	MMUCR - loaded with proper value when we get here
+ *	Upon exit, we reload everything and RFI.
+ */
+finish_tlb_load_47x:
+	/* Combine RPN & ERPN an write WS 1 */
+	rlwimi	r11,r12,0,0,31-PAGE_SHIFT
+	tlbwe	r11,r13,1
+
+	/* And make up word 2 */
+	li	r10,0xf85			/* Mask to apply from PTE */
+	rlwimi	r10,r12,29,30,30		/* DIRTY -> SW position */
+	and	r11,r12,r10			/* Mask PTE bits to keep */
+	andi.	r10,r12,_PAGE_USER		/* User page ? */
+	beq	1f				/* nope, leave U bits empty */
+	rlwimi	r11,r11,3,26,28			/* yes, copy S bits to U */
+1:	tlbwe	r11,r13,2
+
+	/* Done...restore registers and get out of here.
+	*/
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
+	mtcr	r11
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
+	rfi
+
+#endif /* CONFIG_PPC_47x */
+
+	/* Debug Interrupt */
+	/*
+	 * This statement needs to exist at the end of the IVPR
+	 * definition just in case you end up taking a debug
+	 * exception within another exception.
+	 */
+	DEBUG_CRIT_EXCEPTION
+
 /*
  * Global functions
  */
@@ -647,6 +703,428 @@
 	blr
 
 /*
+ * Init CPU state. This is called at boot time or for secondary CPUs
+ * to setup initial TLB entries, setup IVORs, etc...
+ *
+ */
+_GLOBAL(init_cpu_state)
+	mflr	r22
+#ifdef CONFIG_PPC_47x
+	/* We use the PVR to differenciate 44x cores from 476 */
+	mfspr	r3,SPRN_PVR
+	srwi	r3,r3,16
+	cmplwi	cr0,r3,PVR_476@h
+	beq	head_start_47x
+	cmplwi	cr0,r3,PVR_476_ISS@h
+	beq	head_start_47x
+#endif /* CONFIG_PPC_47x */
+
+/*
+ * In case the firmware didn't do it, we apply some workarounds
+ * that are good for all 440 core variants here
+ */
+	mfspr	r3,SPRN_CCR0
+	rlwinm	r3,r3,0,0,27	/* disable icache prefetch */
+	isync
+	mtspr	SPRN_CCR0,r3
+	isync
+	sync
+
+/*
+ * Set up the initial MMU state for 44x
+ *
+ * We are still executing code at the virtual address
+ * mappings set by the firmware for the base of RAM.
+ *
+ * We first invalidate all TLB entries but the one
+ * we are running from.  We then load the KERNELBASE
+ * mappings so we can begin to use kernel addresses
+ * natively and so the interrupt vector locations are
+ * permanently pinned (necessary since Book E
+ * implementations always have translation enabled).
+ *
+ * TODO: Use the known TLB entry we are running from to
+ *	 determine which physical region we are located
+ *	 in.  This can be used to determine where in RAM
+ *	 (on a shared CPU system) or PCI memory space
+ *	 (on a DRAMless system) we are located.
+ *       For now, we assume a perfect world which means
+ *	 we are located at the base of DRAM (physical 0).
+ */
+
+/*
+ * Search TLB for entry that we are currently using.
+ * Invalidate all entries but the one we are using.
+ */
+	/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
+	mfspr	r3,SPRN_PID			/* Get PID */
+	mfmsr	r4				/* Get MSR */
+	andi.	r4,r4,MSR_IS@l			/* TS=1? */
+	beq	wmmucr				/* If not, leave STS=0 */
+	oris	r3,r3,PPC44x_MMUCR_STS@h	/* Set STS=1 */
+wmmucr:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
+	sync
+
+	bl	invstr				/* Find our address */
+invstr:	mflr	r5				/* Make it accessible */
+	tlbsx	r23,0,r5			/* Find entry we are in */
+	li	r4,0				/* Start at TLB entry 0 */
+	li	r3,0				/* Set PAGEID inval value */
+1:	cmpw	r23,r4				/* Is this our entry? */
+	beq	skpinv				/* If so, skip the inval */
+	tlbwe	r3,r4,PPC44x_TLB_PAGEID		/* If not, inval the entry */
+skpinv:	addi	r4,r4,1				/* Increment */
+	cmpwi	r4,64				/* Are we done? */
+	bne	1b				/* If not, repeat */
+	isync					/* If so, context change */
+
+/*
+ * Configure and load pinned entry into TLB slot 63.
+ */
+
+	lis	r3,PAGE_OFFSET@h
+	ori	r3,r3,PAGE_OFFSET@l
+
+	/* Kernel is at the base of RAM */
+	li r4, 0			/* Load the kernel physical address */
+
+	/* Load the kernel PID = 0 */
+	li	r0,0
+	mtspr	SPRN_PID,r0
+	sync
+
+	/* Initialize MMUCR */
+	li	r5,0
+	mtspr	SPRN_MMUCR,r5
+	sync
+
+	/* pageid fields */
+	clrrwi	r3,r3,10		/* Mask off the effective page number */
+	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
+
+	/* xlat fields */
+	clrrwi	r4,r4,10		/* Mask off the real page number */
+					/* ERPN is 0 for first 4GB page */
+
+	/* attrib fields */
+	/* Added guarded bit to protect against speculative loads/stores */
+	li	r5,0
+	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
+
+        li      r0,63                    /* TLB slot 63 */
+
+	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
+	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
+	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
+
+	/* Force context change */
+	mfmsr	r0
+	mtspr	SPRN_SRR1, r0
+	lis	r0,3f@h
+	ori	r0,r0,3f@l
+	mtspr	SPRN_SRR0,r0
+	sync
+	rfi
+
+	/* If necessary, invalidate original entry we used */
+3:	cmpwi	r23,63
+	beq	4f
+	li	r6,0
+	tlbwe   r6,r23,PPC44x_TLB_PAGEID
+	isync
+
+4:
+#ifdef CONFIG_PPC_EARLY_DEBUG_44x
+	/* Add UART mapping for early debug. */
+
+	/* pageid fields */
+	lis	r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
+	ori	r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
+
+	/* xlat fields */
+	lis	r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
+	ori	r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
+
+	/* attrib fields */
+	li	r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
+        li      r0,62                    /* TLB slot 0 */
+
+	tlbwe	r3,r0,PPC44x_TLB_PAGEID
+	tlbwe	r4,r0,PPC44x_TLB_XLAT
+	tlbwe	r5,r0,PPC44x_TLB_ATTRIB
+
+	/* Force context change */
+	isync
+#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
+
+	/* Establish the interrupt vector offsets */
+	SET_IVOR(0,  CriticalInput);
+	SET_IVOR(1,  MachineCheck);
+	SET_IVOR(2,  DataStorage);
+	SET_IVOR(3,  InstructionStorage);
+	SET_IVOR(4,  ExternalInput);
+	SET_IVOR(5,  Alignment);
+	SET_IVOR(6,  Program);
+	SET_IVOR(7,  FloatingPointUnavailable);
+	SET_IVOR(8,  SystemCall);
+	SET_IVOR(9,  AuxillaryProcessorUnavailable);
+	SET_IVOR(10, Decrementer);
+	SET_IVOR(11, FixedIntervalTimer);
+	SET_IVOR(12, WatchdogTimer);
+	SET_IVOR(13, DataTLBError44x);
+	SET_IVOR(14, InstructionTLBError44x);
+	SET_IVOR(15, DebugCrit);
+
+	b	head_start_common
+
+
+#ifdef CONFIG_PPC_47x
+
+#ifdef CONFIG_SMP
+
+/* Entry point for secondary 47x processors */
+_GLOBAL(start_secondary_47x)
+        mr      r24,r3          /* CPU number */
+
+	bl	init_cpu_state
+
+	/* Now we need to bolt the rest of kernel memory which
+	 * is done in C code. We must be careful because our task
+	 * struct or our stack can (and will probably) be out
+	 * of reach of the initial 256M TLB entry, so we use a
+	 * small temporary stack in .bss for that. This works
+	 * because only one CPU at a time can be in this code
+	 */
+	lis	r1,temp_boot_stack@h
+	ori	r1,r1,temp_boot_stack@l
+	addi	r1,r1,1024-STACK_FRAME_OVERHEAD
+	li	r0,0
+	stw	r0,0(r1)
+	bl	mmu_init_secondary
+
+	/* Now we can get our task struct and real stack pointer */
+
+	/* Get current_thread_info and current */
+	lis	r1,secondary_ti@ha
+	lwz	r1,secondary_ti@l(r1)
+	lwz	r2,TI_TASK(r1)
+
+	/* Current stack pointer */
+	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+	li	r0,0
+	stw	r0,0(r1)
+
+	/* Kernel stack for exception entry in SPRG3 */
+	addi	r4,r2,THREAD	/* init task's THREAD */
+	mtspr	SPRN_SPRG3,r4
+
+	b	start_secondary
+
+#endif /* CONFIG_SMP */
+
+/*
+ * Set up the initial MMU state for 44x
+ *
+ * We are still executing code at the virtual address
+ * mappings set by the firmware for the base of RAM.
+ */
+
+head_start_47x:
+	/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
+	mfspr	r3,SPRN_PID			/* Get PID */
+	mfmsr	r4				/* Get MSR */
+	andi.	r4,r4,MSR_IS@l			/* TS=1? */
+	beq	1f				/* If not, leave STS=0 */
+	oris	r3,r3,PPC47x_MMUCR_STS@h	/* Set STS=1 */
+1:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
+	sync
+
+	/* Find the entry we are running from */
+	bl	1f
+1:	mflr	r23
+	tlbsx	r23,0,r23
+	tlbre	r24,r23,0
+	tlbre	r25,r23,1
+	tlbre	r26,r23,2
+
+/*
+ * Cleanup time
+ */
+
+	/* Initialize MMUCR */
+	li	r5,0
+	mtspr	SPRN_MMUCR,r5
+	sync
+
+clear_all_utlb_entries:
+
+	#; Set initial values.
+
+	addis		r3,0,0x8000
+	addi		r4,0,0
+	addi		r5,0,0
+	b		clear_utlb_entry
+
+	#; Align the loop to speed things up.
+
+	.align		6
+
+clear_utlb_entry:
+
+	tlbwe		r4,r3,0
+	tlbwe		r5,r3,1
+	tlbwe		r5,r3,2
+	addis		r3,r3,0x2000
+	cmpwi		r3,0
+	bne		clear_utlb_entry
+	addis		r3,0,0x8000
+	addis		r4,r4,0x100
+	cmpwi		r4,0
+	bne		clear_utlb_entry
+
+	#; Restore original entry.
+
+	oris	r23,r23,0x8000  /* specify the way */
+	tlbwe		r24,r23,0
+	tlbwe		r25,r23,1
+	tlbwe		r26,r23,2
+
+/*
+ * Configure and load pinned entry into TLB for the kernel core
+ */
+
+	lis	r3,PAGE_OFFSET@h
+	ori	r3,r3,PAGE_OFFSET@l
+
+	/* Kernel is at the base of RAM */
+	li r4, 0			/* Load the kernel physical address */
+
+	/* Load the kernel PID = 0 */
+	li	r0,0
+	mtspr	SPRN_PID,r0
+	sync
+
+	/* Word 0 */
+	clrrwi	r3,r3,12		/* Mask off the effective page number */
+	ori	r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_256M
+
+	/* Word 1 */
+	clrrwi	r4,r4,12		/* Mask off the real page number */
+					/* ERPN is 0 for first 4GB page */
+	/* Word 2 */
+	li	r5,0
+	ori	r5,r5,PPC47x_TLB2_S_RWX
+#ifdef CONFIG_SMP
+	ori	r5,r5,PPC47x_TLB2_M
+#endif
+
+	/* We write to way 0 and bolted 0 */
+	lis	r0,0x8800
+	tlbwe	r3,r0,0
+	tlbwe	r4,r0,1
+	tlbwe	r5,r0,2
+
+/*
+ * Configure SSPCR, ISPCR and USPCR for now to search everything, we can fix
+ * them up later
+ */
+	LOAD_REG_IMMEDIATE(r3, 0x9abcdef0)
+	mtspr	SPRN_SSPCR,r3
+	mtspr	SPRN_USPCR,r3
+	LOAD_REG_IMMEDIATE(r3, 0x12345670)
+	mtspr	SPRN_ISPCR,r3
+
+	/* Force context change */
+	mfmsr	r0
+	mtspr	SPRN_SRR1, r0
+	lis	r0,3f@h
+	ori	r0,r0,3f@l
+	mtspr	SPRN_SRR0,r0
+	sync
+	rfi
+
+	/* Invalidate original entry we used */
+3:
+	rlwinm	r24,r24,0,21,19 /* clear the "valid" bit */
+	tlbwe	r24,r23,0
+	addi	r24,0,0
+	tlbwe	r24,r23,1
+	tlbwe	r24,r23,2
+	isync                   /* Clear out the shadow TLB entries */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_44x
+	/* Add UART mapping for early debug. */
+
+	/* Word 0 */
+	lis	r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
+	ori	r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_TS | PPC47x_TLB0_1M
+
+	/* Word 1 */
+	lis	r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
+	ori	r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
+
+	/* Word 2 */
+	li	r5,(PPC47x_TLB2_S_RW | PPC47x_TLB2_IMG)
+
+	/* Bolted in way 0, bolt slot 5, we -hope- we don't hit the same
+	 * congruence class as the kernel, we need to make sure of it at
+	 * some point
+	 */
+        lis	r0,0x8d00
+	tlbwe	r3,r0,0
+	tlbwe	r4,r0,1
+	tlbwe	r5,r0,2
+
+	/* Force context change */
+	isync
+#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
+
+	/* Establish the interrupt vector offsets */
+	SET_IVOR(0,  CriticalInput);
+	SET_IVOR(1,  MachineCheckA);
+	SET_IVOR(2,  DataStorage);
+	SET_IVOR(3,  InstructionStorage);
+	SET_IVOR(4,  ExternalInput);
+	SET_IVOR(5,  Alignment);
+	SET_IVOR(6,  Program);
+	SET_IVOR(7,  FloatingPointUnavailable);
+	SET_IVOR(8,  SystemCall);
+	SET_IVOR(9,  AuxillaryProcessorUnavailable);
+	SET_IVOR(10, Decrementer);
+	SET_IVOR(11, FixedIntervalTimer);
+	SET_IVOR(12, WatchdogTimer);
+	SET_IVOR(13, DataTLBError47x);
+	SET_IVOR(14, InstructionTLBError47x);
+	SET_IVOR(15, DebugCrit);
+
+	/* We configure icbi to invalidate 128 bytes at a time since the
+	 * current 32-bit kernel code isn't too happy with icache != dcache
+	 * block size
+	 */
+	mfspr	r3,SPRN_CCR0
+	oris	r3,r3,0x0020
+	mtspr	SPRN_CCR0,r3
+	isync
+
+#endif /* CONFIG_PPC_47x */
+
+/*
+ * Here we are back to code that is common between 44x and 47x
+ *
+ * We proceed to further kernel initialization and return to the
+ * main kernel entry
+ */
+head_start_common:
+	/* Establish the interrupt vector base */
+	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
+	mtspr	SPRN_IVPR,r4
+
+	addis	r22,r22,KERNELBASE@h
+	mtlr	r22
+	isync
+	blr
+
+/*
  * We put a few things here that have to be page-aligned. This stuff
  * goes at the beginning of the data segment, which is page-aligned.
  */
@@ -671,3 +1149,9 @@
  */
 abatron_pteptrs:
 	.space	8
+
+#ifdef CONFIG_SMP
+	.align	12
+temp_boot_stack:
+	.space	1024
+#endif /* CONFIG_SMP */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/head_64.S linux-libre-2.6.35-gnu/arch/powerpc/kernel/head_64.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/head_64.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/head_64.S	2010-08-01 18:11:14.000000000 -0400
@@ -37,7 +37,7 @@
 #include <asm/firmware.h>
 #include <asm/page_64.h>
 #include <asm/irqflags.h>
-#include <asm/kvm_book3s_64_asm.h>
+#include <asm/kvm_book3s_asm.h>
 
 /* The physical memory is layed out such that the secondary processor
  * spin code sits at 0x0000...0x00ff. On server, the vectors follow
@@ -169,7 +169,7 @@
 /* KVM trampoline code needs to be close to the interrupt handlers */
 
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-#include "../kvm/book3s_64_rmhandlers.S"
+#include "../kvm/book3s_rmhandlers.S"
 #endif
 
 _GLOBAL(generic_secondary_thread_init)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/head_8xx.S linux-libre-2.6.35-gnu/arch/powerpc/kernel/head_8xx.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/head_8xx.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/head_8xx.S	2010-08-01 18:11:14.000000000 -0400
@@ -71,9 +71,6 @@
  * in the first level table, but that would require many changes to the
  * Linux page directory/table functions that I don't want to do right now.
  *
- * I used to use SPRG2 for a temporary register in the TLB handler, but it
- * has since been put to other uses.  I now use a hack to save a register
- * and the CCR at memory location 0.....Someday I'll fix this.....
  *	-- Dan
  */
 	.globl	__start
@@ -302,8 +299,13 @@
 	DO_8xx_CPU6(0x3f80, r3)
 	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
 	mfcr	r10
+#ifdef CONFIG_8xx_CPU6
 	stw	r10, 0(r0)
 	stw	r11, 4(r0)
+#else
+	mtspr	SPRN_DAR, r10
+	mtspr	SPRN_SPRG2, r11
+#endif
 	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
 #ifdef CONFIG_8xx_CPU15
 	addi	r11, r10, 0x1000
@@ -318,12 +320,16 @@
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
+#ifdef CONFIG_MODULES
+	/* Only modules will cause ITLB Misses as we always
+	 * pin the first 8MB of kernel memory */
 	andi.	r11, r10, 0x0800	/* Address >= 0x80000000 */
 	beq	3f
 	lis	r11, swapper_pg_dir@h
 	ori	r11, r11, swapper_pg_dir@l
 	rlwimi	r10, r11, 0, 2, 19
 3:
+#endif
 	lwz	r11, 0(r10)	/* Get the level 1 entry */
 	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
 	beq	2f		/* If zero, don't try to find a pte */
@@ -339,31 +345,35 @@
 	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
 	lwz	r10, 0(r11)	/* Get the pte */
 
+#ifdef CONFIG_SWAP
 	andi.	r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT
 	cmpwi	cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT
 	bne-	cr0, 2f
-
-	/* Clear PP lsb, 0x400 */
-	rlwinm 	r10, r10, 0, 22, 20
-
+#endif
 	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 22 and 28 must be clear.
+	 * Software indicator bits 21 and 28 must be clear.
 	 * Software indicator bits 24, 25, 26, and 27 must be
 	 * set.  All other Linux PTE bits control the behavior
 	 * of the MMU.
 	 */
 	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
+	rlwimi	r10, r11, 0, 0x07f8	/* Set 24-27, clear 21-23,28 */
 	DO_8xx_CPU6(0x2d80, r3)
 	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
 
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	/* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+	mfspr	r10, SPRN_DAR
+	mtcr	r10
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_SPRG2
+#else
 	lwz	r11, 0(r0)
 	mtcr	r11
 	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
 	lwz	r3, 8(r0)
 #endif
+	mfspr	r10, SPRN_M_TW
 	rfi
 2:
 	mfspr	r11, SPRN_SRR1
@@ -373,13 +383,20 @@
 	rlwinm	r11, r11, 0, 0xffff
 	mtspr	SPRN_SRR1, r11
 
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	/* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+	mfspr	r10, SPRN_DAR
+	mtcr	r10
+	li	r11, 0x00f0
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_SPRG2
+#else
 	lwz	r11, 0(r0)
 	mtcr	r11
 	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
 	lwz	r3, 8(r0)
 #endif
+	mfspr	r10, SPRN_M_TW
 	b	InstructionAccess
 
 	. = 0x1200
@@ -390,8 +407,13 @@
 	DO_8xx_CPU6(0x3f80, r3)
 	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
 	mfcr	r10
+#ifdef CONFIG_8xx_CPU6
 	stw	r10, 0(r0)
 	stw	r11, 4(r0)
+#else
+	mtspr	SPRN_DAR, r10
+	mtspr	SPRN_SPRG2, r11
+#endif
 	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -438,15 +460,14 @@
 	 * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5));
 	 * r10 = (r10 & ~PRESENT) | r11;
 	 */
+#ifdef CONFIG_SWAP
 	rlwinm	r11, r10, 32-5, _PAGE_PRESENT
 	and	r11, r11, r10
 	rlwimi	r10, r11, 0, _PAGE_PRESENT
-
+#endif
 	/* Honour kernel RO, User NA */
 	/* 0x200 == Extended encoding, bit 22 */
-	/* r11 =  (r10 & _PAGE_USER) >> 2 */
-	rlwinm	r11, r10, 32-2, 0x200
-	or	r10, r11, r10
+	rlwimi	r10, r10, 32-2, 0x200 /* Copy USER to bit 22, 0x200 */
 	/* r11 =  (r10 & _PAGE_RW) >> 1 */
 	rlwinm	r11, r10, 32-1, 0x200
 	or	r10, r11, r10
@@ -460,18 +481,24 @@
 	 * of the MMU.
 	 */
 2:	li	r11, 0x00f0
-	mtspr	SPRN_DAR,r11	/* Tag DAR */
 	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
 	DO_8xx_CPU6(0x3d80, r3)
 	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
 
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	/* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+	mfspr	r10, SPRN_DAR
+	mtcr	r10
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_SPRG2
+#else
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
 	lwz	r11, 0(r0)
 	mtcr	r11
 	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
 	lwz	r3, 8(r0)
 #endif
+	mfspr	r10, SPRN_M_TW
 	rfi
 
 /* This is an instruction TLB error on the MPC8xx.  This could be due
@@ -683,9 +710,6 @@
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* init task's THREAD */
 	mtspr	SPRN_SPRG_THREAD,r4
-	li	r3,0
-	/* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */
-	mtspr	SPRN_SPRG2,r3	/* 0 => r1 has kernel sp */
 
 	/* stack */
 	lis	r1,init_thread_union@ha
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/head_booke.h linux-libre-2.6.35-gnu/arch/powerpc/kernel/head_booke.h
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/head_booke.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/head_booke.h	2010-08-01 18:11:14.000000000 -0400
@@ -1,6 +1,7 @@
 #ifndef __HEAD_BOOKE_H__
 #define __HEAD_BOOKE_H__
 
+#include <asm/ptrace.h>	/* for STACK_FRAME_REGS_MARKER */
 /*
  * Macros used for common Book-e exception handling
  */
@@ -48,6 +49,9 @@
 	stw	r10,0(r11);						     \
 	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
 	stw	r0,GPR0(r11);						     \
+	lis	r10, STACK_FRAME_REGS_MARKER@ha;/* exception frame marker */ \
+	addi	r10, r10, STACK_FRAME_REGS_MARKER@l;			     \
+	stw	r10, 8(r11);						     \
 	SAVE_4GPRS(3, r11);						     \
 	SAVE_2GPRS(7, r11)
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/head_fsl_booke.S linux-libre-2.6.35-gnu/arch/powerpc/kernel/head_fsl_booke.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/head_fsl_booke.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/head_fsl_booke.S	2010-08-01 18:11:14.000000000 -0400
@@ -94,204 +94,10 @@
  */
 
 _ENTRY(__early_start)
-/* 1. Find the index of the entry we're executing in */
-	bl	invstr				/* Find our address */
-invstr:	mflr	r6				/* Make it accessible */
-	mfmsr	r7
-	rlwinm	r4,r7,27,31,31			/* extract MSR[IS] */
-	mfspr	r7, SPRN_PID0
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* search MSR[IS], SPID=PID0 */
-	mfspr	r7,SPRN_MAS1
-	andis.	r7,r7,MAS1_VALID@h
-	bne	match_TLB
-
-	mfspr	r7,SPRN_MMUCFG
-	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
-	cmpwi	r7,3
-	bne	match_TLB			/* skip if NPIDS != 3 */
-
-	mfspr	r7,SPRN_PID1
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* search MSR[IS], SPID=PID1 */
-	mfspr	r7,SPRN_MAS1
-	andis.	r7,r7,MAS1_VALID@h
-	bne	match_TLB
-	mfspr	r7, SPRN_PID2
-	slwi	r7,r7,16
-	or	r7,r7,r4
-	mtspr	SPRN_MAS6,r7
-	tlbsx	0,r6				/* Fall through, we had to match */
-
-match_TLB:
-	mfspr	r7,SPRN_MAS0
-	rlwinm	r3,r7,16,20,31			/* Extract MAS0(Entry) */
-
-	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
-	oris	r7,r7,MAS1_IPROT@h
-	mtspr	SPRN_MAS1,r7
-	tlbwe
 
-/* 2. Invalidate all entries except the entry we're executing in */
-	mfspr	r9,SPRN_TLB1CFG
-	andi.	r9,r9,0xfff
-	li	r6,0				/* Set Entry counter to 0 */
-1:	lis	r7,0x1000			/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r7,SPRN_MAS1
-	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
-	cmpw	r3,r6
-	beq	skpinv				/* Dont update the current execution TLB */
-	mtspr	SPRN_MAS1,r7
-	tlbwe
-	isync
-skpinv:	addi	r6,r6,1				/* Increment */
-	cmpw	r6,r9				/* Are we done? */
-	bne	1b				/* If not, repeat */
-
-	/* Invalidate TLB0 */
-	li	r6,0x04
-	tlbivax 0,r6
-	TLBSYNC
-	/* Invalidate TLB1 */
-	li	r6,0x0c
-	tlbivax 0,r6
-	TLBSYNC
-
-/* 3. Setup a temp mapping and jump to it */
-	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
-	addi	r5, r5, 0x1
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-
-	/* grab and fixup the RPN */
-	mfspr	r6,SPRN_MAS1	/* extract MAS1[SIZE] */
-	rlwinm	r6,r6,25,27,31
-	li	r8,-1
-	addi	r6,r6,10
-	slw	r6,r8,r6	/* convert to mask */
-
-	bl	1f		/* Find our address */
-1:	mflr	r7
-
-	mfspr	r8,SPRN_MAS3
-#ifdef CONFIG_PHYS_64BIT
-	mfspr	r23,SPRN_MAS7
-#endif
-	and	r8,r6,r8
-	subfic	r9,r6,-4096
-	and	r9,r9,r7
-
-	or	r25,r8,r9
-	ori	r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
-
-	/* Just modify the entry ID and EPN for the temp mapping */
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
-	mtspr	SPRN_MAS0,r7
-	xori	r6,r4,1		/* Setup TMP mapping in the other Address space */
-	slwi	r6,r6,12
-	oris	r6,r6,(MAS1_VALID|MAS1_IPROT)@h
-	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_4K))@l
-	mtspr	SPRN_MAS1,r6
-	mfspr	r6,SPRN_MAS2
-	li	r7,0		/* temp EPN = 0 */
-	rlwimi	r7,r6,0,20,31
-	mtspr	SPRN_MAS2,r7
-	mtspr	SPRN_MAS3,r8
-	tlbwe
-
-	xori	r6,r4,1
-	slwi	r6,r6,5		/* setup new context with other address space */
-	bl	1f		/* Find our address */
-1:	mflr	r9
-	rlwimi	r7,r9,0,20,31
-	addi	r7,r7,(2f - 1b)
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r6
-	rfi
-2:
-/* 4. Clear out PIDs & Search info */
-	li	r6,0
-	mtspr   SPRN_MAS6,r6
-	mtspr	SPRN_PID0,r6
-
-	mfspr	r7,SPRN_MMUCFG
-	rlwinm	r7,r7,21,28,31			/* extract MMUCFG[NPIDS] */
-	cmpwi	r7,3
-	bne	2f				/* skip if NPIDS != 3 */
-
-	mtspr	SPRN_PID1,r6
-	mtspr	SPRN_PID2,r6
-
-/* 5. Invalidate mapping we started in */
-2:
-	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r3,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r3) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r6,SPRN_MAS1
-	rlwinm	r6,r6,0,2,0	/* clear IPROT */
-	mtspr	SPRN_MAS1,r6
-	tlbwe
-	/* Invalidate TLB1 */
-	li	r9,0x0c
-	tlbivax 0,r9
-	TLBSYNC
-
-/* The mapping only needs to be cache-coherent on SMP */
-#ifdef CONFIG_SMP
-#define M_IF_SMP	MAS2_M
-#else
-#define M_IF_SMP	0
-#endif
-
-/* 6. Setup KERNELBASE mapping in TLB1[0] */
-	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
-	mtspr	SPRN_MAS0,r6
-	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
-	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_64M))@l
-	mtspr	SPRN_MAS1,r6
-	lis	r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@h
-	ori	r6,r6,MAS2_VAL(PAGE_OFFSET, BOOK3E_PAGESZ_64M, M_IF_SMP)@l
-	mtspr	SPRN_MAS2,r6
-	mtspr	SPRN_MAS3,r8
-	tlbwe
-
-/* 7. Jump to KERNELBASE mapping */
-	lis	r6,(KERNELBASE & ~0xfff)@h
-	ori	r6,r6,(KERNELBASE & ~0xfff)@l
-	lis	r7,MSR_KERNEL@h
-	ori	r7,r7,MSR_KERNEL@l
-	bl	1f			/* Find our address */
-1:	mflr	r9
-	rlwimi	r6,r9,0,20,31
-	addi	r6,r6,(2f - 1b)
-	mtspr	SPRN_SRR0,r6
-	mtspr	SPRN_SRR1,r7
-	rfi				/* start execution out of TLB1[0] entry */
-
-/* 8. Clear out the temp mapping */
-2:	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
-	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
-	mtspr	SPRN_MAS0,r7
-	tlbre
-	mfspr	r8,SPRN_MAS1
-	rlwinm	r8,r8,0,2,0	/* clear IPROT */
-	mtspr	SPRN_MAS1,r8
-	tlbwe
-	/* Invalidate TLB1 */
-	li	r9,0x0c
-	tlbivax 0,r9
-	TLBSYNC
+#define ENTRY_MAPPING_BOOT_SETUP
+#include "fsl_booke_entry_mapping.S"
+#undef ENTRY_MAPPING_BOOT_SETUP
 
 	/* Establish the interrupt vector offsets */
 	SET_IVOR(0,  CriticalInput);
@@ -639,6 +445,13 @@
 	rlwinm	r12,r12,0,16,1
 	mtspr	SPRN_MAS1,r12
 
+	/* Make up the required permissions for kernel code */
+#ifdef CONFIG_PTE_64BIT
+	li	r13,_PAGE_PRESENT | _PAGE_BAP_SX
+	oris	r13,r13,_PAGE_ACCESSED@h
+#else
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+#endif
 	b	4f
 
 	/* Get the PGD for the current thread */
@@ -646,15 +459,15 @@
 	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 
-4:
-	/* Make up the required permissions */
+	/* Make up the required permissions for user code */
 #ifdef CONFIG_PTE_64BIT
-	li	r13,_PAGE_PRESENT | _PAGE_EXEC
+	li	r13,_PAGE_PRESENT | _PAGE_BAP_UX
 	oris	r13,r13,_PAGE_ACCESSED@h
 #else
 	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
 #endif
 
+4:
 	FIND_PTE
 	andc.	r13,r13,r11		/* Check permission */
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/ibmebus.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/ibmebus.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/ibmebus.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/ibmebus.c	2010-08-01 18:11:14.000000000 -0400
@@ -140,14 +140,14 @@
 
 static int ibmebus_match_path(struct device *dev, void *data)
 {
-	struct device_node *dn = to_of_device(dev)->node;
+	struct device_node *dn = to_of_device(dev)->dev.of_node;
 	return (dn->full_name &&
 		(strcasecmp((char *)data, dn->full_name) == 0));
 }
 
 static int ibmebus_match_node(struct device *dev, void *data)
 {
-	return to_of_device(dev)->node == data;
+	return to_of_device(dev)->dev.of_node == data;
 }
 
 static int ibmebus_create_device(struct device_node *dn)
@@ -202,7 +202,7 @@
 int ibmebus_register_driver(struct of_platform_driver *drv)
 {
 	/* If the driver uses devices that ibmebus doesn't know, add them */
-	ibmebus_create_devices(drv->match_table);
+	ibmebus_create_devices(drv->driver.of_match_table);
 
 	return of_register_driver(drv, &ibmebus_bus_type);
 }
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/iommu.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/iommu.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/iommu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/iommu.c	2010-08-01 18:11:14.000000000 -0400
@@ -43,20 +43,9 @@
 #define DBG(...)
 
 static int novmerge;
-static int protect4gb = 1;
 
 static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int);
 
-static int __init setup_protect4gb(char *str)
-{
-	if (strcmp(str, "on") == 0)
-		protect4gb = 1;
-	else if (strcmp(str, "off") == 0)
-		protect4gb = 0;
-
-	return 1;
-}
-
 static int __init setup_iommu(char *str)
 {
 	if (!strcmp(str, "novmerge"))
@@ -66,7 +55,6 @@
 	return 1;
 }
 
-__setup("protect4gb=", setup_protect4gb);
 __setup("iommu=", setup_iommu);
 
 static unsigned long iommu_range_alloc(struct device *dev,
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/irq.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/irq.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/irq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/irq.c	2010-08-01 18:11:14.000000000 -0400
@@ -284,37 +284,42 @@
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-void fixup_irqs(cpumask_t map)
+void fixup_irqs(const struct cpumask *map)
 {
 	struct irq_desc *desc;
 	unsigned int irq;
 	static int warned;
+	cpumask_var_t mask;
 
-	for_each_irq(irq) {
-		cpumask_t mask;
+	alloc_cpumask_var(&mask, GFP_KERNEL);
 
+	for_each_irq(irq) {
 		desc = irq_to_desc(irq);
-		if (desc && desc->status & IRQ_PER_CPU)
+		if (!desc)
 			continue;
 
-		cpumask_and(&mask, desc->affinity, &map);
-		if (any_online_cpu(mask) == NR_CPUS) {
+		if (desc->status & IRQ_PER_CPU)
+			continue;
+
+		cpumask_and(mask, desc->affinity, map);
+		if (cpumask_any(mask) >= nr_cpu_ids) {
 			printk("Breaking affinity for irq %i\n", irq);
-			mask = map;
+			cpumask_copy(mask, map);
 		}
 		if (desc->chip->set_affinity)
-			desc->chip->set_affinity(irq, &mask);
+			desc->chip->set_affinity(irq, mask);
 		else if (desc->action && !(warned++))
 			printk("Cannot set affinity for irq %i\n", irq);
 	}
 
+	free_cpumask_var(mask);
+
 	local_irq_enable();
 	mdelay(1);
 	local_irq_disable();
 }
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 static inline void handle_one_irq(unsigned int irq)
 {
 	struct thread_info *curtp, *irqtp;
@@ -355,12 +360,6 @@
 	if (irqtp->flags)
 		set_bits(irqtp->flags, &curtp->flags);
 }
-#else
-static inline void handle_one_irq(unsigned int irq)
-{
-	generic_handle_irq(irq);
-}
-#endif
 
 static inline void check_stack_overflow(void)
 {
@@ -452,7 +451,6 @@
 }
 #endif
 
-#ifdef CONFIG_IRQSTACKS
 struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
 struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly;
 
@@ -489,10 +487,6 @@
 	irqtp->task = NULL;
 }
 
-#else
-#define do_softirq_onstack()	__do_softirq()
-#endif /* CONFIG_IRQSTACKS */
-
 void do_softirq(void)
 {
 	unsigned long flags;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/kgdb.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/kgdb.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/kgdb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/kgdb.c	2010-08-01 18:11:14.000000000 -0400
@@ -20,6 +20,7 @@
 #include <linux/smp.h>
 #include <linux/signal.h>
 #include <linux/ptrace.h>
+#include <linux/kdebug.h>
 #include <asm/current.h>
 #include <asm/processor.h>
 #include <asm/machdep.h>
@@ -115,7 +116,8 @@
 /* KGDB functions to use existing PowerPC64 hooks. */
 static int kgdb_debugger(struct pt_regs *regs)
 {
-	return kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs);
+	return !kgdb_handle_exception(1, computeSignal(TRAP(regs)),
+				      DIE_OOPS, regs);
 }
 
 static int kgdb_handle_breakpoint(struct pt_regs *regs)
@@ -123,7 +125,7 @@
 	if (user_mode(regs))
 		return 0;
 
-	if (kgdb_handle_exception(0, SIGTRAP, 0, regs) != 0)
+	if (kgdb_handle_exception(1, SIGTRAP, 0, regs) != 0)
 		return 0;
 
 	if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
@@ -309,6 +311,11 @@
 	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
 }
 
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->nip = pc;
+}
+
 /*
  * This function does PowerPC specific procesing for interfacing to gdb.
  */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/kprobes.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/kprobes.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/kprobes.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/kprobes.c	2010-08-01 18:11:14.000000000 -0400
@@ -114,6 +114,9 @@
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	regs->msr &= ~MSR_CE;
 	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+#ifdef CONFIG_PPC_47x
+	isync();
+#endif
 #endif
 
 	/*
@@ -375,17 +378,6 @@
  * single-stepped a copy of the instruction.  The address of this
  * copy is p->ainsn.insn.
  */
-static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
-{
-	int ret;
-	unsigned int insn = *p->ainsn.insn;
-
-	regs->nip = (unsigned long)p->addr;
-	ret = emulate_step(regs, insn);
-	if (ret == 0)
-		regs->nip = (unsigned long)p->addr + 4;
-}
-
 static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *cur = kprobe_running();
@@ -403,7 +395,8 @@
 		cur->post_handler(cur, regs, 0);
 	}
 
-	resume_execution(cur, regs);
+	/* Adjust nip to after the single-stepped instruction */
+	regs->nip = (unsigned long)cur->addr + 4;
 	regs->msr |= kcb->kprobe_saved_msr;
 
 	/*Restore back the original saved kprobes variables and continue. */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/lparcfg.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/lparcfg.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/lparcfg.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/lparcfg.c	2010-08-01 18:11:14.000000000 -0400
@@ -38,7 +38,7 @@
 #include <asm/vio.h>
 #include <asm/mmu.h>
 
-#define MODULE_VERS "1.8"
+#define MODULE_VERS "1.9"
 #define MODULE_NAME "lparcfg"
 
 /* #define LPARCFG_DEBUG */
@@ -487,6 +487,14 @@
 	seq_printf(m, "dispatch_dispersions=%lu\n", dispatch_dispersions);
 }
 
+static void parse_em_data(struct seq_file *m)
+{
+	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
+
+	if (plpar_hcall(H_GET_EM_PARMS, retbuf) == H_SUCCESS)
+		seq_printf(m, "power_mode_data=%016lx\n", retbuf[0]);
+}
+
 static int pseries_lparcfg_data(struct seq_file *m, void *v)
 {
 	int partition_potential_processors;
@@ -541,6 +549,8 @@
 
 	seq_printf(m, "slb_size=%d\n", mmu_slb_size);
 
+	parse_em_data(m);
+
 	return 0;
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/machine_kexec_64.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/machine_kexec_64.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/machine_kexec_64.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/machine_kexec_64.c	2010-08-01 18:11:14.000000000 -0400
@@ -155,66 +155,70 @@
 
 #ifdef CONFIG_SMP
 
-/* FIXME: we should schedule this function to be called on all cpus based
- * on calling the interrupts, but we would like to call it off irq level
- * so that the interrupt controller is clean.
- */
+static int kexec_all_irq_disabled = 0;
+
 static void kexec_smp_down(void *arg)
 {
+	local_irq_disable();
+	mb(); /* make sure our irqs are disabled before we say they are */
+	get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
+	while(kexec_all_irq_disabled == 0)
+		cpu_relax();
+	mb(); /* make sure all irqs are disabled before this */
+	/*
+	 * Now every CPU has IRQs off, we can clear out any pending
+	 * IPIs and be sure that no more will come in after this.
+	 */
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(0, 1);
 
-	local_irq_disable();
 	kexec_smp_wait();
 	/* NOTREACHED */
 }
 
-static void kexec_prepare_cpus(void)
+static void kexec_prepare_cpus_wait(int wait_state)
 {
 	int my_cpu, i, notified=-1;
 
-	smp_call_function(kexec_smp_down, NULL, /* wait */0);
 	my_cpu = get_cpu();
-
-	/* check the others cpus are now down (via paca hw cpu id == -1) */
-	for (i=0; i < NR_CPUS; i++) {
+	/* Make sure each CPU has atleast made it to the state we need */
+	for_each_online_cpu(i) {
 		if (i == my_cpu)
 			continue;
 
-		while (paca[i].hw_cpu_id != -1) {
+		while (paca[i].kexec_state < wait_state) {
 			barrier();
-			if (!cpu_possible(i)) {
-				printk("kexec: cpu %d hw_cpu_id %d is not"
-						" possible, ignoring\n",
-						i, paca[i].hw_cpu_id);
-				break;
-			}
-			if (!cpu_online(i)) {
-				/* Fixme: this can be spinning in
-				 * pSeries_secondary_wait with a paca
-				 * waiting for it to go online.
-				 */
-				printk("kexec: cpu %d hw_cpu_id %d is not"
-						" online, ignoring\n",
-						i, paca[i].hw_cpu_id);
-				break;
-			}
 			if (i != notified) {
 				printk( "kexec: waiting for cpu %d (physical"
-						" %d) to go down\n",
-						i, paca[i].hw_cpu_id);
+						" %d) to enter %i state\n",
+					i, paca[i].hw_cpu_id, wait_state);
 				notified = i;
 			}
 		}
 	}
+	mb();
+}
+
+static void kexec_prepare_cpus(void)
+{
+
+	smp_call_function(kexec_smp_down, NULL, /* wait */0);
+	local_irq_disable();
+	mb(); /* make sure IRQs are disabled before we say they are */
+	get_paca()->kexec_state = KEXEC_STATE_IRQS_OFF;
+
+	kexec_prepare_cpus_wait(KEXEC_STATE_IRQS_OFF);
+	/* we are sure every CPU has IRQs off at this point */
+	kexec_all_irq_disabled = 1;
 
 	/* after we tell the others to go down */
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(0, 0);
 
-	put_cpu();
+	/* Before removing MMU mapings make sure all CPUs have entered real mode */
+	kexec_prepare_cpus_wait(KEXEC_STATE_REAL_MODE);
 
-	local_irq_disable();
+	put_cpu();
 }
 
 #else /* ! SMP */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/machine_kexec.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/machine_kexec.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/machine_kexec.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/machine_kexec.c	2010-08-01 18:11:14.000000000 -0400
@@ -12,7 +12,7 @@
 #include <linux/kexec.h>
 #include <linux/reboot.h>
 #include <linux/threads.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -66,11 +66,11 @@
 	unsigned long long crash_size, crash_base;
 	int ret;
 
-	/* this is necessary because of lmb_phys_mem_size() */
-	lmb_analyze();
+	/* this is necessary because of memblock_phys_mem_size() */
+	memblock_analyze();
 
 	/* use common parsing */
-	ret = parse_crashkernel(boot_command_line, lmb_phys_mem_size(),
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
 			&crash_size, &crash_base);
 	if (ret == 0 && crash_size > 0) {
 		crashk_res.start = crash_base;
@@ -133,9 +133,9 @@
 			"for crashkernel (System RAM: %ldMB)\n",
 			(unsigned long)(crash_size >> 20),
 			(unsigned long)(crashk_res.start >> 20),
-			(unsigned long)(lmb_phys_mem_size() >> 20));
+			(unsigned long)(memblock_phys_mem_size() >> 20));
 
-	lmb_reserve(crashk_res.start, crash_size);
+	memblock_reserve(crashk_res.start, crash_size);
 }
 
 int overlaps_crashkernel(unsigned long start, unsigned long size)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/Makefile linux-libre-2.6.35-gnu/arch/powerpc/kernel/Makefile
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -57,8 +57,12 @@
 obj-$(CONFIG_E500)		+= idle_e500.o
 obj-$(CONFIG_6xx)		+= idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
 obj-$(CONFIG_TAU)		+= tau_6xx.o
-obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o \
-				   swsusp_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o
+ifeq ($(CONFIG_FSL_BOOKE),y)
+obj-$(CONFIG_HIBERNATION)	+= swsusp_booke.o
+else
+obj-$(CONFIG_HIBERNATION)	+= swsusp_$(CONFIG_WORD_SIZE).o
+endif
 obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
 obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/misc_32.S linux-libre-2.6.35-gnu/arch/powerpc/kernel/misc_32.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/misc_32.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/misc_32.S	2010-08-01 18:11:14.000000000 -0400
@@ -33,7 +33,6 @@
 
 	.text
 
-#ifdef CONFIG_IRQSTACKS
 _GLOBAL(call_do_softirq)
 	mflr	r0
 	stw	r0,4(r1)
@@ -56,7 +55,6 @@
 	lwz	r0,4(r1)
 	mtlr	r0
 	blr
-#endif /* CONFIG_IRQSTACKS */
 
 /*
  * This returns the high 64 bits of the product of two 64-bit numbers.
@@ -441,7 +439,7 @@
 	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	0b
 	sync
-#ifndef CONFIG_44x
+#ifdef CONFIG_44x
 	/* We don't flush the icache on 44x. Those have a virtual icache
 	 * and we don't have access to the virtual address here (it's
 	 * not the page vaddr but where it's mapped in user space). The
@@ -449,15 +447,19 @@
 	 * a change in the address space occurs, before returning to
 	 * user space
 	 */
+BEGIN_MMU_FTR_SECTION
+	blr
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_44x)
+#endif /* CONFIG_44x */
 	mtctr	r4
 1:	icbi	0,r6
 	addi	r6,r6,L1_CACHE_BYTES
 	bdnz	1b
 	sync
 	isync
-#endif /* CONFIG_44x */
 	blr
 
+#ifndef CONFIG_BOOKE
 /*
  * Flush a particular page from the data cache to RAM, identified
  * by its physical address.  We turn off the MMU so we can just use
@@ -490,6 +492,7 @@
 	mtmsr	r10				/* restore DR */
 	isync
 	blr
+#endif /* CONFIG_BOOKE */
 
 /*
  * Clear pages using the dcbz instruction, which doesn't cause any
@@ -706,6 +709,22 @@
 	/* r4 = reboot_code_buffer */
 	/* r5 = start_address      */
 
+#ifdef CONFIG_FSL_BOOKE
+
+	mr	r29, r3
+	mr	r30, r4
+	mr	r31, r5
+
+#define ENTRY_MAPPING_KEXEC_SETUP
+#include "fsl_booke_entry_mapping.S"
+#undef ENTRY_MAPPING_KEXEC_SETUP
+
+	mr      r3, r29
+	mr      r4, r30
+	mr      r5, r31
+
+	li	r0, 0
+#else
 	li	r0, 0
 
 	/*
@@ -722,6 +741,7 @@
 	rfi
 
 1:
+#endif
 	/* from this point address translation is turned off */
 	/* and interrupts are disabled */
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/misc_64.S linux-libre-2.6.35-gnu/arch/powerpc/kernel/misc_64.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/misc_64.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/misc_64.S	2010-08-01 18:11:14.000000000 -0400
@@ -24,10 +24,10 @@
 #include <asm/asm-offsets.h>
 #include <asm/cputable.h>
 #include <asm/thread_info.h>
+#include <asm/kexec.h>
 
 	.text
 
-#ifdef CONFIG_IRQSTACKS
 _GLOBAL(call_do_softirq)
 	mflr	r0
 	std	r0,16(r1)
@@ -51,7 +51,6 @@
 	ld	r0,16(r1)
 	mtlr	r0
 	blr
-#endif /* CONFIG_IRQSTACKS */
 
 	.section	".toc","aw"
 PPC64_CACHES:
@@ -471,6 +470,10 @@
 1:	mflr	r5
 	addi	r5,r5,kexec_flag-1b
 
+	li	r4,KEXEC_STATE_REAL_MODE
+	stb	r4,PACAKEXECSTATE(r13)
+	SYNC
+
 99:	HMT_LOW
 #ifdef CONFIG_KEXEC		/* use no memory without kexec */
 	lwz	r4,0(r5)
@@ -494,14 +497,11 @@
  * note: this is a terminal routine, it does not save lr
  *
  * get phys id from paca
- * set paca id to -1 to say we got here
  * switch to real mode
  * join other cpus in kexec_wait(phys_id)
  */
 _GLOBAL(kexec_smp_wait)
 	lhz	r3,PACAHWCPUID(r13)
-	li	r4,-1
-	sth	r4,PACAHWCPUID(r13)	/* let others know we left */
 	bl	real_mode
 	b	.kexec_wait
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/of_device.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/of_device.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/of_device.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/of_device.c	2010-08-01 18:11:14.000000000 -0400
@@ -13,7 +13,7 @@
 static void of_device_make_bus_id(struct of_device *dev)
 {
 	static atomic_t bus_no_reg_magic;
-	struct device_node *node = dev->node;
+	struct device_node *node = dev->dev.of_node;
 	const u32 *reg;
 	u64 addr;
 	int magic;
@@ -69,11 +69,10 @@
 	if (!dev)
 		return NULL;
 
-	dev->node = of_node_get(np);
-	dev->dev.dma_mask = &dev->dma_mask;
+	dev->dev.of_node = of_node_get(np);
+	dev->dev.dma_mask = &dev->archdata.dma_mask;
 	dev->dev.parent = parent;
 	dev->dev.release = of_release_dev;
-	dev->dev.archdata.of_node = np;
 
 	if (bus_id)
 		dev_set_name(&dev->dev, "%s", bus_id);
@@ -95,17 +94,17 @@
 
 	ofdev = to_of_device(dev);
 
-	if (add_uevent_var(env, "OF_NAME=%s", ofdev->node->name))
+	if (add_uevent_var(env, "OF_NAME=%s", ofdev->dev.of_node->name))
 		return -ENOMEM;
 
-	if (add_uevent_var(env, "OF_TYPE=%s", ofdev->node->type))
+	if (add_uevent_var(env, "OF_TYPE=%s", ofdev->dev.of_node->type))
 		return -ENOMEM;
 
         /* Since the compatible field can contain pretty much anything
          * it's not really legal to split it out with commas. We split it
          * up using a number of environment variables instead. */
 
-	compat = of_get_property(ofdev->node, "compatible", &cplen);
+	compat = of_get_property(ofdev->dev.of_node, "compatible", &cplen);
 	while (compat && *compat && cplen > 0) {
 		if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat))
 			return -ENOMEM;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/of_platform.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/of_platform.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/of_platform.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/of_platform.c	2010-08-01 18:11:14.000000000 -0400
@@ -74,7 +74,7 @@
 	if (!dev)
 		return NULL;
 
-	dev->dma_mask = 0xffffffffUL;
+	dev->archdata.dma_mask = 0xffffffffUL;
 	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	dev->dev.bus = &of_platform_bus_type;
@@ -195,7 +195,7 @@
 
 static int of_dev_node_match(struct device *dev, void *data)
 {
-	return to_of_device(dev)->node == data;
+	return to_of_device(dev)->dev.of_node == data;
 }
 
 struct of_device *of_find_device_by_node(struct device_node *np)
@@ -213,7 +213,7 @@
 static int of_dev_phandle_match(struct device *dev, void *data)
 {
 	phandle *ph = data;
-	return to_of_device(dev)->node->phandle == *ph;
+	return to_of_device(dev)->dev.of_node->phandle == *ph;
 }
 
 struct of_device *of_find_device_by_phandle(phandle ph)
@@ -246,10 +246,10 @@
 	if (ppc_md.pci_setup_phb == NULL)
 		return -ENODEV;
 
-	printk(KERN_INFO "Setting up PCI bus %s\n", dev->node->full_name);
+	pr_info("Setting up PCI bus %s\n", dev->dev.of_node->full_name);
 
 	/* Alloc and setup PHB data structure */
-	phb = pcibios_alloc_controller(dev->node);
+	phb = pcibios_alloc_controller(dev->dev.of_node);
 	if (!phb)
 		return -ENODEV;
 
@@ -263,19 +263,19 @@
 	}
 
 	/* Process "ranges" property */
-	pci_process_bridge_OF_ranges(phb, dev->node, 0);
+	pci_process_bridge_OF_ranges(phb, dev->dev.of_node, 0);
 
 	/* Init pci_dn data structures */
 	pci_devs_phb_init_dynamic(phb);
 
 	/* Register devices with EEH */
 #ifdef CONFIG_EEH
-	if (dev->node->child)
-		eeh_add_device_tree_early(dev->node);
+	if (dev->dev.of_node->child)
+		eeh_add_device_tree_early(dev->dev.of_node);
 #endif /* CONFIG_EEH */
 
 	/* Scan the bus */
-	pcibios_scan_phb(phb, dev->node);
+	pcibios_scan_phb(phb, dev->dev.of_node);
 	if (phb->bus == NULL)
 		return -ENXIO;
 
@@ -306,10 +306,11 @@
 };
 
 static struct of_platform_driver of_pci_phb_driver = {
-	.match_table = of_pci_phb_ids,
 	.probe = of_pci_phb_probe,
 	.driver = {
 		.name = "of-pci",
+		.owner = THIS_MODULE,
+		.of_match_table = of_pci_phb_ids,
 	},
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/paca.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/paca.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/paca.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/paca.c	2010-08-01 18:11:14.000000000 -0400
@@ -9,7 +9,7 @@
 
 #include <linux/threads.h>
 #include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/firmware.h>
 #include <asm/lppaca.h>
@@ -18,6 +18,7 @@
 #include <asm/pgtable.h>
 #include <asm/iseries/lpar_map.h>
 #include <asm/iseries/hv_types.h>
+#include <asm/kexec.h>
 
 /* This symbol is provided by the linker - let it fill in the paca
  * field correctly */
@@ -97,6 +98,7 @@
 	new_paca->kernelbase = (unsigned long) _stext;
 	new_paca->kernel_msr = MSR_KERNEL;
 	new_paca->hw_cpu_id = 0xffff;
+	new_paca->kexec_state = KEXEC_STATE_NONE;
 	new_paca->__current = &init_task;
 #ifdef CONFIG_PPC_STD_MMU_64
 	new_paca->slb_shadow_ptr = &slb_shadow[cpu];
@@ -115,7 +117,7 @@
 	 * the first segment. On iSeries they must be within the area mapped
 	 * by the HV, which is HvPagesToMap * HVPAGESIZE bytes.
 	 */
-	limit = min(0x10000000ULL, lmb.rmo_size);
+	limit = min(0x10000000ULL, memblock.rmo_size);
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
 		limit = min(limit, HvPagesToMap * HVPAGESIZE);
 
@@ -126,7 +128,7 @@
 
 	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus);
 
-	paca = __va(lmb_alloc_base(paca_size, PAGE_SIZE, limit));
+	paca = __va(memblock_alloc_base(paca_size, PAGE_SIZE, limit));
 	memset(paca, 0, paca_size);
 
 	printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
@@ -146,7 +148,7 @@
 	if (new_size >= paca_size)
 		return;
 
-	lmb_free(__pa(paca) + new_size, paca_size - new_size);
+	memblock_free(__pa(paca) + new_size, paca_size - new_size);
 
 	printk(KERN_DEBUG "Freed %u bytes for unused pacas\n",
 		paca_size - new_size);
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/pci-common.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/pci-common.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/pci-common.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/pci-common.c	2010-08-01 18:11:14.000000000 -0400
@@ -1097,8 +1097,8 @@
 		if (dev->is_added)
 			continue;
 
-		/* Setup OF node pointer in archdata */
-		sd->of_node = pci_device_to_OF_node(dev);
+		/* Setup OF node pointer in the device */
+		dev->dev.of_node = pci_device_to_OF_node(dev);
 
 		/* Fixup NUMA node as it may not be setup yet by the generic
 		 * code and is needed by the DMA init
@@ -1309,6 +1309,7 @@
 		printk(KERN_WARNING "PCI: Cannot allocate resource region "
 		       "%d of PCI bridge %d, will remap\n", i, bus->number);
 clear_resource:
+		res->start = res->end = 0;
 		res->flags = 0;
 	}
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/pci_of_scan.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/pci_of_scan.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/pci_of_scan.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/pci_of_scan.c	2010-08-01 18:11:14.000000000 -0400
@@ -310,6 +310,8 @@
 	/* Scan direct children */
 	for_each_child_of_node(node, child) {
 		pr_debug("  * %s\n", child->full_name);
+		if (!of_device_is_available(child))
+			continue;
 		reg = of_get_property(child, "reg", &reglen);
 		if (reg == NULL || reglen < 20)
 			continue;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/perf_event.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/perf_event.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/perf_event.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/perf_event.c	2010-08-01 18:11:14.000000000 -0400
@@ -35,6 +35,9 @@
 	u64 alternatives[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
 	unsigned long amasks[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
 	unsigned long avalues[MAX_HWEVENTS][MAX_EVENT_ALTERNATIVES];
+
+	unsigned int group_flag;
+	int n_txn_start;
 };
 DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
 
@@ -718,66 +721,6 @@
 	return n;
 }
 
-static void event_sched_in(struct perf_event *event)
-{
-	event->state = PERF_EVENT_STATE_ACTIVE;
-	event->oncpu = smp_processor_id();
-	event->tstamp_running += event->ctx->time - event->tstamp_stopped;
-	if (is_software_event(event))
-		event->pmu->enable(event);
-}
-
-/*
- * Called to enable a whole group of events.
- * Returns 1 if the group was enabled, or -EAGAIN if it could not be.
- * Assumes the caller has disabled interrupts and has
- * frozen the PMU with hw_perf_save_disable.
- */
-int hw_perf_group_sched_in(struct perf_event *group_leader,
-	       struct perf_cpu_context *cpuctx,
-	       struct perf_event_context *ctx)
-{
-	struct cpu_hw_events *cpuhw;
-	long i, n, n0;
-	struct perf_event *sub;
-
-	if (!ppmu)
-		return 0;
-	cpuhw = &__get_cpu_var(cpu_hw_events);
-	n0 = cpuhw->n_events;
-	n = collect_events(group_leader, ppmu->n_counter - n0,
-			   &cpuhw->event[n0], &cpuhw->events[n0],
-			   &cpuhw->flags[n0]);
-	if (n < 0)
-		return -EAGAIN;
-	if (check_excludes(cpuhw->event, cpuhw->flags, n0, n))
-		return -EAGAIN;
-	i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0);
-	if (i < 0)
-		return -EAGAIN;
-	cpuhw->n_events = n0 + n;
-	cpuhw->n_added += n;
-
-	/*
-	 * OK, this group can go on; update event states etc.,
-	 * and enable any software events
-	 */
-	for (i = n0; i < n0 + n; ++i)
-		cpuhw->event[i]->hw.config = cpuhw->events[i];
-	cpuctx->active_oncpu += n;
-	n = 1;
-	event_sched_in(group_leader);
-	list_for_each_entry(sub, &group_leader->sibling_list, group_entry) {
-		if (sub->state != PERF_EVENT_STATE_OFF) {
-			event_sched_in(sub);
-			++n;
-		}
-	}
-	ctx->nr_active += n;
-
-	return 1;
-}
-
 /*
  * Add a event to the PMU.
  * If all events are not already frozen, then we disable and
@@ -805,12 +748,22 @@
 	cpuhw->event[n0] = event;
 	cpuhw->events[n0] = event->hw.config;
 	cpuhw->flags[n0] = event->hw.event_base;
+
+	/*
+	 * If group events scheduling transaction was started,
+	 * skip the schedulability test here, it will be peformed
+	 * at commit time(->commit_txn) as a whole
+	 */
+	if (cpuhw->group_flag & PERF_EVENT_TXN_STARTED)
+		goto nocheck;
+
 	if (check_excludes(cpuhw->event, cpuhw->flags, n0, 1))
 		goto out;
 	if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1))
 		goto out;
-
 	event->hw.config = cpuhw->events[n0];
+
+nocheck:
 	++cpuhw->n_events;
 	++cpuhw->n_added;
 
@@ -838,8 +791,11 @@
 	cpuhw = &__get_cpu_var(cpu_hw_events);
 	for (i = 0; i < cpuhw->n_events; ++i) {
 		if (event == cpuhw->event[i]) {
-			while (++i < cpuhw->n_events)
+			while (++i < cpuhw->n_events) {
 				cpuhw->event[i-1] = cpuhw->event[i];
+				cpuhw->events[i-1] = cpuhw->events[i];
+				cpuhw->flags[i-1] = cpuhw->flags[i];
+			}
 			--cpuhw->n_events;
 			ppmu->disable_pmc(event->hw.idx - 1, cpuhw->mmcr);
 			if (event->hw.idx) {
@@ -896,11 +852,65 @@
 	local_irq_restore(flags);
 }
 
+/*
+ * Start group events scheduling transaction
+ * Set the flag to make pmu::enable() not perform the
+ * schedulability test, it will be performed at commit time
+ */
+void power_pmu_start_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+
+	cpuhw->group_flag |= PERF_EVENT_TXN_STARTED;
+	cpuhw->n_txn_start = cpuhw->n_events;
+}
+
+/*
+ * Stop group events scheduling transaction
+ * Clear the flag and pmu::enable() will perform the
+ * schedulability test.
+ */
+void power_pmu_cancel_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events);
+
+	cpuhw->group_flag &= ~PERF_EVENT_TXN_STARTED;
+}
+
+/*
+ * Commit group events scheduling transaction
+ * Perform the group schedulability test as a whole
+ * Return 0 if success
+ */
+int power_pmu_commit_txn(const struct pmu *pmu)
+{
+	struct cpu_hw_events *cpuhw;
+	long i, n;
+
+	if (!ppmu)
+		return -EAGAIN;
+	cpuhw = &__get_cpu_var(cpu_hw_events);
+	n = cpuhw->n_events;
+	if (check_excludes(cpuhw->event, cpuhw->flags, 0, n))
+		return -EAGAIN;
+	i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n);
+	if (i < 0)
+		return -EAGAIN;
+
+	for (i = cpuhw->n_txn_start; i < n; ++i)
+		cpuhw->event[i]->hw.config = cpuhw->events[i];
+
+	return 0;
+}
+
 struct pmu power_pmu = {
 	.enable		= power_pmu_enable,
 	.disable	= power_pmu_disable,
 	.read		= power_pmu_read,
 	.unthrottle	= power_pmu_unthrottle,
+	.start_txn	= power_pmu_start_txn,
+	.cancel_txn	= power_pmu_cancel_txn,
+	.commit_txn	= power_pmu_commit_txn,
 };
 
 /*
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/perf_event_fsl_emb.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/perf_event_fsl_emb.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/perf_event_fsl_emb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/perf_event_fsl_emb.c	2010-08-01 18:11:14.000000000 -0400
@@ -566,9 +566,9 @@
 	 * Finally record data if requested.
 	 */
 	if (record) {
-		struct perf_sample_data data = {
-			.period	= event->hw.last_period,
-		};
+		struct perf_sample_data data;
+
+		perf_sample_data_init(&data, 0);
 
 		if (perf_event_overflow(event, nmi, &data, regs)) {
 			/*
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/ppc_ksyms.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/ppc_ksyms.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/ppc_ksyms.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/ppc_ksyms.c	2010-08-01 18:11:14.000000000 -0400
@@ -101,6 +101,10 @@
 EXPORT_SYMBOL(start_thread);
 EXPORT_SYMBOL(kernel_thread);
 
+#ifdef CONFIG_PPC_FPU
+EXPORT_SYMBOL_GPL(cvt_df);
+EXPORT_SYMBOL_GPL(cvt_fd);
+#endif
 EXPORT_SYMBOL(giveup_fpu);
 #ifdef CONFIG_ALTIVEC
 EXPORT_SYMBOL(giveup_altivec);
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/process.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/process.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/process.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/process.c	2010-08-01 18:11:14.000000000 -0400
@@ -371,6 +371,9 @@
 	/* XXX should we have a CPU_FTR_HAS_DABR ? */
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	mtspr(SPRN_DAC1, dabr);
+#ifdef CONFIG_PPC_47x
+	isync();
+#endif
 #elif defined(CONFIG_PPC_BOOK3S)
 	mtspr(SPRN_DABR, dabr);
 #endif
@@ -1002,7 +1005,6 @@
 	return error;
 }
 
-#ifdef CONFIG_IRQSTACKS
 static inline int valid_irq_stack(unsigned long sp, struct task_struct *p,
 				  unsigned long nbytes)
 {
@@ -1027,10 +1029,6 @@
 	return 0;
 }
 
-#else
-#define valid_irq_stack(sp, p, nb)	0
-#endif /* CONFIG_IRQSTACKS */
-
 int validate_sp(unsigned long sp, struct task_struct *p,
 		       unsigned long nbytes)
 {
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/prom.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/prom.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/prom.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/prom.c	2010-08-01 18:11:14.000000000 -0400
@@ -31,7 +31,7 @@
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -98,7 +98,7 @@
 
 	if ((memory_limit && (start + size) > memory_limit) ||
 			overlaps_crashkernel(start, size)) {
-		p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size));
+		p = __va(memblock_alloc_base(size, PAGE_SIZE, memblock.rmo_size));
 		memcpy(p, initial_boot_params, size);
 		initial_boot_params = (struct boot_param_header *)p;
 		DBG("Moved device tree to 0x%p\n", p);
@@ -411,13 +411,13 @@
 {
 	__be32 *dm, *ls, *usm;
 	unsigned long l, n, flags;
-	u64 base, size, lmb_size;
+	u64 base, size, memblock_size;
 	unsigned int is_kexec_kdump = 0, rngs;
 
 	ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
 	if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
 		return 0;
-	lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls);
+	memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
 
 	dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
 	if (dm == NULL || l < sizeof(__be32))
@@ -442,11 +442,11 @@
 		   or if the block is not assigned to this partition (0x8) */
 		if ((flags & 0x80) || !(flags & 0x8))
 			continue;
-		size = lmb_size;
+		size = memblock_size;
 		rngs = 1;
 		if (is_kexec_kdump) {
 			/*
-			 * For each lmb in ibm,dynamic-memory, a corresponding
+			 * For each memblock in ibm,dynamic-memory, a corresponding
 			 * entry in linux,drconf-usable-memory property contains
 			 * a counter 'p' followed by 'p' (base, size) duple.
 			 * Now read the counter from
@@ -469,10 +469,10 @@
 				if ((base + size) > 0x80000000ul)
 					size = 0x80000000ul - base;
 			}
-			lmb_add(base, size);
+			memblock_add(base, size);
 		} while (--rngs);
 	}
-	lmb_dump_all();
+	memblock_dump_all();
 	return 0;
 }
 #else
@@ -501,14 +501,14 @@
 	}
 #endif
 
-	lmb_add(base, size);
+	memblock_add(base, size);
 
 	memstart_addr = min((u64)memstart_addr, base);
 }
 
 u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 {
-	return lmb_alloc(size, align);
+	return memblock_alloc(size, align);
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -534,12 +534,12 @@
 	/* before we do anything, lets reserve the dt blob */
 	self_base = __pa((unsigned long)initial_boot_params);
 	self_size = initial_boot_params->totalsize;
-	lmb_reserve(self_base, self_size);
+	memblock_reserve(self_base, self_size);
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* then reserve the initrd, if any */
 	if (initrd_start && (initrd_end > initrd_start))
-		lmb_reserve(__pa(initrd_start), initrd_end - initrd_start);
+		memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
 #endif /* CONFIG_BLK_DEV_INITRD */
 
 #ifdef CONFIG_PPC32
@@ -560,7 +560,7 @@
 			if (base_32 == self_base && size_32 == self_size)
 				continue;
 			DBG("reserving: %x -> %x\n", base_32, size_32);
-			lmb_reserve(base_32, size_32);
+			memblock_reserve(base_32, size_32);
 		}
 		return;
 	}
@@ -571,7 +571,7 @@
 		if (size == 0)
 			break;
 		DBG("reserving: %llx -> %llx\n", base, size);
-		lmb_reserve(base, size);
+		memblock_reserve(base, size);
 	}
 }
 
@@ -594,7 +594,7 @@
 		return phyp_dump_info->reserve_bootvar;
 
 	/* divide by 20 to get 5% of value */
-	tmp = lmb_end_of_DRAM();
+	tmp = memblock_end_of_DRAM();
 	do_div(tmp, 20);
 
 	/* round it down in multiples of 256 */
@@ -633,11 +633,11 @@
 	if (phyp_dump_info->phyp_dump_is_active) {
 		/* Reserve *everything* above RMR.Area freed by userland tools*/
 		base = variable_reserve_size;
-		size = lmb_end_of_DRAM() - base;
+		size = memblock_end_of_DRAM() - base;
 
 		/* XXX crashed_ram_end is wrong, since it may be beyond
 		 * the memory_limit, it will need to be adjusted. */
-		lmb_reserve(base, size);
+		memblock_reserve(base, size);
 
 		phyp_dump_info->init_reserve_start = base;
 		phyp_dump_info->init_reserve_size = size;
@@ -645,8 +645,8 @@
 		size = phyp_dump_info->cpu_state_size +
 			phyp_dump_info->hpte_region_size +
 			variable_reserve_size;
-		base = lmb_end_of_DRAM() - size;
-		lmb_reserve(base, size);
+		base = memblock_end_of_DRAM() - size;
+		memblock_reserve(base, size);
 		phyp_dump_info->init_reserve_start = base;
 		phyp_dump_info->init_reserve_size = size;
 	}
@@ -681,8 +681,8 @@
 	 */
 	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
 
-	/* Scan memory nodes and rebuild LMBs */
-	lmb_init();
+	/* Scan memory nodes and rebuild MEMBLOCKs */
+	memblock_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
 
@@ -690,11 +690,11 @@
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
-	/* Reserve LMB regions used by kernel, initrd, dt, etc... */
-	lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+	/* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
+	memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
 	/* If relocatable, reserve first 32k for interrupt vectors etc. */
 	if (PHYSICAL_START > MEMORY_START)
-		lmb_reserve(MEMORY_START, 0x8000);
+		memblock_reserve(MEMORY_START, 0x8000);
 	reserve_kdump_trampoline();
 	reserve_crashkernel();
 	early_reserve_mem();
@@ -706,17 +706,17 @@
 
 		/* Ensure that total memory size is page-aligned, because
 		 * otherwise mark_bootmem() gets upset. */
-		lmb_analyze();
-		memsize = lmb_phys_mem_size();
+		memblock_analyze();
+		memsize = memblock_phys_mem_size();
 		if ((memsize & PAGE_MASK) != memsize)
 			limit = memsize & PAGE_MASK;
 	}
-	lmb_enforce_memory_limit(limit);
+	memblock_enforce_memory_limit(limit);
 
-	lmb_analyze();
-	lmb_dump_all();
+	memblock_analyze();
+	memblock_dump_all();
 
-	DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
+	DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
 
 	/* We may need to relocate the flat tree, do it now.
 	 * FIXME .. and the initrd too? */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/prom_init.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/prom_init.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/prom_init.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/prom_init.c	2010-08-01 18:11:14.000000000 -0400
@@ -872,7 +872,7 @@
 				    "ibm_architecture_vec structure inconsistent: 0x%x !\n",
 				    *cores);
 		} else {
-			*cores = NR_CPUS / prom_count_smt_threads();
+			*cores = DIV_ROUND_UP(NR_CPUS, prom_count_smt_threads());
 			prom_printf("Max number of cores passed to firmware: 0x%x\n",
 				    (unsigned long)*cores);
 		}
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/prom_init_check.sh linux-libre-2.6.35-gnu/arch/powerpc/kernel/prom_init_check.sh
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/prom_init_check.sh	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/prom_init_check.sh	2010-08-01 18:11:14.000000000 -0400
@@ -52,12 +52,18 @@
 	if [ "${UNDEF:0:9}" = "_restgpr_" ]; then
 		OK=1
 	fi
+	if [ "${UNDEF:0:10}" = "_restgpr0_" ]; then
+		OK=1
+	fi
 	if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then
 		OK=1
 	fi
 	if [ "${UNDEF:0:9}" = "_savegpr_" ]; then
 		OK=1
 	fi
+	if [ "${UNDEF:0:10}" = "_savegpr0_" ]; then
+		OK=1
+	fi
 	if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then
 		OK=1
 	fi
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/ptrace.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/ptrace.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/ptrace.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/ptrace.c	2010-08-01 18:11:14.000000000 -0400
@@ -39,6 +39,109 @@
 #include <asm/system.h>
 
 /*
+ * The parameter save area on the stack is used to store arguments being passed
+ * to callee function and is located at fixed offset from stack pointer.
+ */
+#ifdef CONFIG_PPC32
+#define PARAMETER_SAVE_AREA_OFFSET	24  /* bytes */
+#else /* CONFIG_PPC32 */
+#define PARAMETER_SAVE_AREA_OFFSET	48  /* bytes */
+#endif
+
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define STR(s)	#s			/* convert to string */
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define GPR_OFFSET_NAME(num)	\
+	{.name = STR(gpr##num), .offset = offsetof(struct pt_regs, gpr[num])}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+	GPR_OFFSET_NAME(0),
+	GPR_OFFSET_NAME(1),
+	GPR_OFFSET_NAME(2),
+	GPR_OFFSET_NAME(3),
+	GPR_OFFSET_NAME(4),
+	GPR_OFFSET_NAME(5),
+	GPR_OFFSET_NAME(6),
+	GPR_OFFSET_NAME(7),
+	GPR_OFFSET_NAME(8),
+	GPR_OFFSET_NAME(9),
+	GPR_OFFSET_NAME(10),
+	GPR_OFFSET_NAME(11),
+	GPR_OFFSET_NAME(12),
+	GPR_OFFSET_NAME(13),
+	GPR_OFFSET_NAME(14),
+	GPR_OFFSET_NAME(15),
+	GPR_OFFSET_NAME(16),
+	GPR_OFFSET_NAME(17),
+	GPR_OFFSET_NAME(18),
+	GPR_OFFSET_NAME(19),
+	GPR_OFFSET_NAME(20),
+	GPR_OFFSET_NAME(21),
+	GPR_OFFSET_NAME(22),
+	GPR_OFFSET_NAME(23),
+	GPR_OFFSET_NAME(24),
+	GPR_OFFSET_NAME(25),
+	GPR_OFFSET_NAME(26),
+	GPR_OFFSET_NAME(27),
+	GPR_OFFSET_NAME(28),
+	GPR_OFFSET_NAME(29),
+	GPR_OFFSET_NAME(30),
+	GPR_OFFSET_NAME(31),
+	REG_OFFSET_NAME(nip),
+	REG_OFFSET_NAME(msr),
+	REG_OFFSET_NAME(ctr),
+	REG_OFFSET_NAME(link),
+	REG_OFFSET_NAME(xer),
+	REG_OFFSET_NAME(ccr),
+#ifdef CONFIG_PPC64
+	REG_OFFSET_NAME(softe),
+#else
+	REG_OFFSET_NAME(mq),
+#endif
+	REG_OFFSET_NAME(trap),
+	REG_OFFSET_NAME(dar),
+	REG_OFFSET_NAME(dsisr),
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_query_register_name() - query register name from its offset
+ * @offset:	the offset of a register in struct pt_regs.
+ *
+ * regs_query_register_name() returns the name of a register from its
+ * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
+ */
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+/*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
  */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/rtas.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/rtas.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/rtas.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/rtas.c	2010-08-01 18:11:14.000000000 -0400
@@ -22,7 +22,7 @@
 #include <linux/smp.h>
 #include <linux/completion.h>
 #include <linux/cpumask.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/prom.h>
@@ -691,10 +691,14 @@
 {
 	int status;
 
-	if (panic_timeout)
-		return;
-
-	if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term"))
+	/*
+	 * Firmware with the ibm,extended-os-term property is guaranteed
+	 * to always return from an ibm,os-term call. Earlier versions without
+	 * this property may terminate the partition which we want to avoid
+	 * since it interferes with panic_timeout.
+	 */
+	if (RTAS_UNKNOWN_SERVICE == rtas_token("ibm,os-term") ||
+	    RTAS_UNKNOWN_SERVICE == rtas_token("ibm,extended-os-term"))
 		return;
 
 	snprintf(rtas_os_term_buf, 2048, "OS panic: %s", str);
@@ -705,8 +709,7 @@
 	} while (rtas_busy_delay(status));
 
 	if (status != 0)
-		printk(KERN_EMERG "ibm,os-term call failed %d\n",
-			       status);
+		printk(KERN_EMERG "ibm,os-term call failed %d\n", status);
 }
 
 static int ibm_suspend_me_token = RTAS_UNKNOWN_SERVICE;
@@ -931,11 +934,11 @@
 	 */
 #ifdef CONFIG_PPC64
 	if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) {
-		rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
+		rtas_region = min(memblock.rmo_size, RTAS_INSTANTIATE_MAX);
 		ibm_suspend_me_token = rtas_token("ibm,suspend-me");
 	}
 #endif
-	rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
+	rtas_rmo_buf = memblock_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
 
 #ifdef CONFIG_RTAS_ERROR_LOGGING
 	rtas_last_error_token = rtas_token("rtas-last-error");
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/rtasd.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/rtasd.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/rtasd.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/rtasd.c	2010-08-01 18:11:14.000000000 -0400
@@ -411,9 +411,9 @@
 
 	get_online_cpus();
 
-	cpu = next_cpu(smp_processor_id(), cpu_online_map);
-	if (cpu == NR_CPUS) {
-		cpu = first_cpu(cpu_online_map);
+	cpu = cpumask_next(smp_processor_id(), cpu_online_mask);
+        if (cpu >= nr_cpu_ids) {
+		cpu = cpumask_first(cpu_online_mask);
 
 		if (first_pass) {
 			first_pass = 0;
@@ -466,8 +466,8 @@
 	/* Retreive errors from nvram if any */
 	retreive_nvram_error_log();
 
-	schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work,
-				 event_scan_delay);
+	schedule_delayed_work_on(cpumask_first(cpu_online_mask),
+				 &event_scan_work, event_scan_delay);
 }
 
 static int __init rtas_init(void)
@@ -490,6 +490,12 @@
 		return -ENODEV;
 	}
 
+	if (!rtas_event_scan_rate) {
+		/* Broken firmware: take a rate of zero to mean don't scan */
+		printk(KERN_DEBUG "rtasd: scan rate is 0, not scanning\n");
+		return 0;
+	}
+
 	/* Make room for the sequence number */
 	rtas_error_log_max = rtas_get_error_log_max();
 	rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int);
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/rtas_flash.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/rtas_flash.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/rtas_flash.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/rtas_flash.c	2010-08-01 18:11:14.000000000 -0400
@@ -94,12 +94,8 @@
 	struct flash_block_list *next;
 	struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
 };
-struct flash_block_list_header { /* just the header of flash_block_list */
-	unsigned long num_blocks;
-	struct flash_block_list *next;
-};
 
-static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+static struct flash_block_list *rtas_firmware_flash_list;
 
 /* Use slab cache to guarantee 4k alignment */
 static struct kmem_cache *flash_block_cache = NULL;
@@ -108,13 +104,14 @@
 
 /* Local copy of the flash block list.
  * We only allow one open of the flash proc file and create this
- * list as we go.  This list will be put in the
- * rtas_firmware_flash_list var once it is fully read.
+ * list as we go.  The rtas_firmware_flash_list varable will be
+ * set once the data is fully read.
  *
  * For convenience as we build the list we use virtual addrs,
  * we do not fill in the version number, and the length field
  * is treated as the number of entries currently in the block
- * (i.e. not a byte count).  This is all fixed on release.
+ * (i.e. not a byte count).  This is all fixed when calling 
+ * the flash routine.
  */
 
 /* Status int must be first member of struct */
@@ -201,16 +198,16 @@
 	if (uf->flist) {    
 		/* File was opened in write mode for a new flash attempt */
 		/* Clear saved list */
-		if (rtas_firmware_flash_list.next) {
-			free_flash_list(rtas_firmware_flash_list.next);
-			rtas_firmware_flash_list.next = NULL;
+		if (rtas_firmware_flash_list) {
+			free_flash_list(rtas_firmware_flash_list);
+			rtas_firmware_flash_list = NULL;
 		}
 
 		if (uf->status != FLASH_AUTH)  
 			uf->status = flash_list_valid(uf->flist);
 
 		if (uf->status == FLASH_IMG_READY) 
-			rtas_firmware_flash_list.next = uf->flist;
+			rtas_firmware_flash_list = uf->flist;
 		else
 			free_flash_list(uf->flist);
 
@@ -593,7 +590,7 @@
 	unsigned long rtas_block_list;
 	int i, status, update_token;
 
-	if (rtas_firmware_flash_list.next == NULL)
+	if (rtas_firmware_flash_list == NULL)
 		return;		/* nothing to do */
 
 	if (reboot_type != SYS_RESTART) {
@@ -610,20 +607,25 @@
 		return;
 	}
 
-	/* NOTE: the "first" block list is a global var with no data
-	 * blocks in the kernel data segment.  We do this because
-	 * we want to ensure this block_list addr is under 4GB.
+	/*
+	 * NOTE: the "first" block must be under 4GB, so we create
+	 * an entry with no data blocks in the reserved buffer in
+	 * the kernel data segment.
 	 */
-	rtas_firmware_flash_list.num_blocks = 0;
-	flist = (struct flash_block_list *)&rtas_firmware_flash_list;
+	spin_lock(&rtas_data_buf_lock);
+	flist = (struct flash_block_list *)&rtas_data_buf[0];
+	flist->num_blocks = 0;
+	flist->next = rtas_firmware_flash_list;
 	rtas_block_list = virt_to_abs(flist);
 	if (rtas_block_list >= 4UL*1024*1024*1024) {
 		printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
+		spin_unlock(&rtas_data_buf_lock);
 		return;
 	}
 
 	printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
 	/* Update the block_list in place. */
+	rtas_firmware_flash_list = NULL; /* too hard to backout on error */
 	image_size = 0;
 	for (f = flist; f; f = next) {
 		/* Translate data addrs to absolute */
@@ -664,6 +666,7 @@
 		printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
 		break;
 	}
+	spin_unlock(&rtas_data_buf_lock);
 }
 
 static void remove_flash_pde(struct proc_dir_entry *dp)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/setup_32.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/setup_32.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/setup_32.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/setup_32.c	2010-08-01 18:11:14.000000000 -0400
@@ -16,7 +16,7 @@
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/console.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -241,23 +241,19 @@
 
 arch_initcall(ppc_init);
 
-#ifdef CONFIG_IRQSTACKS
 static void __init irqstack_early_init(void)
 {
 	unsigned int i;
 
 	/* interrupt stacks must be in lowmem, we get that for free on ppc32
-	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
 	for_each_possible_cpu(i) {
 		softirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		hardirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 }
-#else
-#define irqstack_early_init()
-#endif
 
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 static void __init exc_lvl_early_init(void)
@@ -265,15 +261,15 @@
 	unsigned int i;
 
 	/* interrupt stacks must be in lowmem, we get that for free on ppc32
-	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
 	for_each_possible_cpu(i) {
 		critirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 #ifdef CONFIG_BOOKE
 		dbgirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		mcheckirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 #endif
 	}
 }
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/setup_64.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/setup_64.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/setup_64.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/setup_64.c	2010-08-01 18:11:14.000000000 -0400
@@ -34,7 +34,7 @@
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/lockdep.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/io.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -158,7 +158,7 @@
  * the CPU that ignores the top 2 bits of the address in real
  * mode so we can access kernel globals normally provided we
  * only toy with things in the RMO region. From here, we do
- * some early parsing of the device-tree to setup out LMB
+ * some early parsing of the device-tree to setup out MEMBLOCK
  * data structures, and allocate & initialize the hash table
  * and segment tables so we can start running with translation
  * enabled.
@@ -404,7 +404,7 @@
 
 	printk("-----------------------------------------------------\n");
 	printk("ppc64_pft_size                = 0x%llx\n", ppc64_pft_size);
-	printk("physicalMemorySize            = 0x%llx\n", lmb_phys_mem_size());
+	printk("physicalMemorySize            = 0x%llx\n", memblock_phys_mem_size());
 	if (ppc64_caches.dline_size != 0x80)
 		printk("ppc64_caches.dcache_line_size = 0x%x\n",
 		       ppc64_caches.dline_size);
@@ -424,9 +424,17 @@
 	DBG(" <- setup_system()\n");
 }
 
-#ifdef CONFIG_IRQSTACKS
+static u64 slb0_limit(void)
+{
+	if (cpu_has_feature(CPU_FTR_1T_SEGMENT)) {
+		return 1UL << SID_SHIFT_1T;
+	}
+	return 1UL << SID_SHIFT;
+}
+
 static void __init irqstack_early_init(void)
 {
+	u64 limit = slb0_limit();
 	unsigned int i;
 
 	/*
@@ -435,16 +443,13 @@
 	 */
 	for_each_possible_cpu(i) {
 		softirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc_base(THREAD_SIZE,
-					    THREAD_SIZE, 0x10000000));
+			__va(memblock_alloc_base(THREAD_SIZE,
+					    THREAD_SIZE, limit));
 		hardirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc_base(THREAD_SIZE,
-					    THREAD_SIZE, 0x10000000));
+			__va(memblock_alloc_base(THREAD_SIZE,
+					    THREAD_SIZE, limit));
 	}
 }
-#else
-#define irqstack_early_init()
-#endif
 
 #ifdef CONFIG_PPC_BOOK3E
 static void __init exc_lvl_early_init(void)
@@ -453,11 +458,11 @@
 
 	for_each_possible_cpu(i) {
 		critirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		dbgirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		mcheckirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 }
 #else
@@ -470,7 +475,7 @@
  */
 static void __init emergency_stack_init(void)
 {
-	unsigned long limit;
+	u64 limit;
 	unsigned int i;
 
 	/*
@@ -482,11 +487,11 @@
 	 * bringup, we need to get at them in real mode. This means they
 	 * must also be within the RMO region.
 	 */
-	limit = min(0x10000000ULL, lmb.rmo_size);
+	limit = min(slb0_limit(), memblock.rmo_size);
 
 	for_each_possible_cpu(i) {
 		unsigned long sp;
-		sp  = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
+		sp  = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
 		sp += THREAD_SIZE;
 		paca[i].emergency_sp = __va(sp);
 	}
@@ -573,12 +578,6 @@
 	printk("[boot]%04x %s\n", src, msg);
 }
 
-void cpu_die(void)
-{
-	if (ppc_md.cpu_die)
-		ppc_md.cpu_die();
-}
-
 #ifdef CONFIG_SMP
 #define PCPU_DYN_SIZE		()
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/setup-common.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/setup-common.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/setup-common.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/setup-common.c	2010-08-01 18:11:14.000000000 -0400
@@ -33,7 +33,7 @@
 #include <linux/serial_8250.h>
 #include <linux/debugfs.h>
 #include <linux/percpu.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of_platform.h>
 #include <asm/io.h>
 #include <asm/paca.h>
@@ -161,45 +161,44 @@
 DEFINE_PER_CPU(unsigned int, cpu_pvr);
 #endif
 
-static int show_cpuinfo(struct seq_file *m, void *v)
+static void show_cpuinfo_summary(struct seq_file *m)
 {
-	unsigned long cpu_id = (unsigned long)v - 1;
-	unsigned int pvr;
-	unsigned short maj;
-	unsigned short min;
-
-	if (cpu_id == NR_CPUS) {
-		struct device_node *root;
-		const char *model = NULL;
+	struct device_node *root;
+	const char *model = NULL;
 #if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
-		unsigned long bogosum = 0;
-		int i;
-		for_each_online_cpu(i)
-			bogosum += loops_per_jiffy;
-		seq_printf(m, "total bogomips\t: %lu.%02lu\n",
-			   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
+	unsigned long bogosum = 0;
+	int i;
+	for_each_online_cpu(i)
+		bogosum += loops_per_jiffy;
+	seq_printf(m, "total bogomips\t: %lu.%02lu\n",
+		   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
 #endif /* CONFIG_SMP && CONFIG_PPC32 */
-		seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
-		if (ppc_md.name)
-			seq_printf(m, "platform\t: %s\n", ppc_md.name);
-		root = of_find_node_by_path("/");
-		if (root)
-			model = of_get_property(root, "model", NULL);
-		if (model)
-			seq_printf(m, "model\t\t: %s\n", model);
-		of_node_put(root);
+	seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
+	if (ppc_md.name)
+		seq_printf(m, "platform\t: %s\n", ppc_md.name);
+	root = of_find_node_by_path("/");
+	if (root)
+		model = of_get_property(root, "model", NULL);
+	if (model)
+		seq_printf(m, "model\t\t: %s\n", model);
+	of_node_put(root);
 
-		if (ppc_md.show_cpuinfo != NULL)
-			ppc_md.show_cpuinfo(m);
+	if (ppc_md.show_cpuinfo != NULL)
+		ppc_md.show_cpuinfo(m);
 
 #ifdef CONFIG_PPC32
-		/* Display the amount of memory */
-		seq_printf(m, "Memory\t\t: %d MB\n",
-			   (unsigned int)(total_memory / (1024 * 1024)));
+	/* Display the amount of memory */
+	seq_printf(m, "Memory\t\t: %d MB\n",
+		   (unsigned int)(total_memory / (1024 * 1024)));
 #endif
+}
 
-		return 0;
-	}
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	unsigned long cpu_id = (unsigned long)v - 1;
+	unsigned int pvr;
+	unsigned short maj;
+	unsigned short min;
 
 	/* We only show online cpus: disable preempt (overzealous, I
 	 * knew) to prevent cpu going down. */
@@ -308,19 +307,28 @@
 #endif
 
 	preempt_enable();
+
+	/* If this is the last cpu, print the summary */
+	if (cpumask_next(cpu_id, cpu_online_mask) >= nr_cpu_ids)
+		show_cpuinfo_summary(m);
+
 	return 0;
 }
 
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
-	unsigned long i = *pos;
-
-	return i <= NR_CPUS ? (void *)(i + 1) : NULL;
+	if (*pos == 0)	/* just in case, cpu 0 is not the first */
+		*pos = cpumask_first(cpu_online_mask);
+	else
+		*pos = cpumask_next(*pos - 1, cpu_online_mask);
+	if ((*pos) < nr_cpu_ids)
+		return (void *)(unsigned long)(*pos + 1);
+	return NULL;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	++*pos;
+	(*pos)++;
 	return c_start(m, pos);
 }
 
@@ -386,14 +394,14 @@
 
 /**
  * setup_cpu_maps - initialize the following cpu maps:
- *                  cpu_possible_map
- *                  cpu_present_map
+ *                  cpu_possible_mask
+ *                  cpu_present_mask
  *
  * Having the possible map set up early allows us to restrict allocations
  * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
  *
  * We do not initialize the online map here; cpus set their own bits in
- * cpu_online_map as they come up.
+ * cpu_online_mask as they come up.
  *
  * This function is valid only for Open Firmware systems.  finish_device_tree
  * must be called before using this.
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/smp.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/smp.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/smp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/smp.c	2010-08-01 18:11:14.000000000 -0400
@@ -59,8 +59,8 @@
 
 struct thread_info *secondary_ti;
 
-DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
-DEFINE_PER_CPU(cpumask_t, cpu_core_map) = CPU_MASK_NONE;
+DEFINE_PER_CPU(cpumask_var_t, cpu_sibling_map);
+DEFINE_PER_CPU(cpumask_var_t, cpu_core_map);
 
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
 EXPORT_PER_CPU_SYMBOL(cpu_core_map);
@@ -271,6 +271,16 @@
 	smp_store_cpu_info(boot_cpuid);
 	cpu_callin_map[boot_cpuid] = 1;
 
+	for_each_possible_cpu(cpu) {
+		zalloc_cpumask_var_node(&per_cpu(cpu_sibling_map, cpu),
+					GFP_KERNEL, cpu_to_node(cpu));
+		zalloc_cpumask_var_node(&per_cpu(cpu_core_map, cpu),
+					GFP_KERNEL, cpu_to_node(cpu));
+	}
+
+	cpumask_set_cpu(boot_cpuid, cpu_sibling_mask(boot_cpuid));
+	cpumask_set_cpu(boot_cpuid, cpu_core_mask(boot_cpuid));
+
 	if (smp_ops)
 		if (smp_ops->probe)
 			max_cpus = smp_ops->probe();
@@ -289,10 +299,6 @@
 void __devinit smp_prepare_boot_cpu(void)
 {
 	BUG_ON(smp_processor_id() != boot_cpuid);
-
-	set_cpu_online(boot_cpuid, true);
-	cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
-	cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
 #ifdef CONFIG_PPC64
 	paca[boot_cpuid].__current = current;
 #endif
@@ -313,7 +319,7 @@
 	set_cpu_online(cpu, false);
 #ifdef CONFIG_PPC64
 	vdso_data->processorCount--;
-	fixup_irqs(cpu_online_map);
+	fixup_irqs(cpu_online_mask);
 #endif
 	return 0;
 }
@@ -333,7 +339,7 @@
 		cpu_relax();
 
 #ifdef CONFIG_PPC64
-	fixup_irqs(cpu_online_map);
+	fixup_irqs(cpu_online_mask);
 	/* counter the irq disable in fixup_irqs */
 	local_irq_enable();
 #endif
@@ -462,7 +468,7 @@
 	return id;
 }
 
-/* Must be called when no change can occur to cpu_present_map,
+/* Must be called when no change can occur to cpu_present_mask,
  * i.e. during cpu online or offline.
  */
 static struct device_node *cpu_to_l2cache(int cpu)
@@ -495,6 +501,14 @@
 	current->active_mm = &init_mm;
 
 	smp_store_cpu_info(cpu);
+
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+	/* Clear any pending timer interrupts */
+	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
+
+	/* Enable decrementer interrupt */
+	mtspr(SPRN_TCR, TCR_DIE);
+#endif
 	set_dec(tb_ticks_per_jiffy);
 	preempt_disable();
 	cpu_callin_map[cpu] = 1;
@@ -517,15 +531,15 @@
 	for (i = 0; i < threads_per_core; i++) {
 		if (cpu_is_offline(base + i))
 			continue;
-		cpu_set(cpu, per_cpu(cpu_sibling_map, base + i));
-		cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
+		cpumask_set_cpu(cpu, cpu_sibling_mask(base + i));
+		cpumask_set_cpu(base + i, cpu_sibling_mask(cpu));
 
 		/* cpu_core_map should be a superset of
 		 * cpu_sibling_map even if we don't have cache
 		 * information, so update the former here, too.
 		 */
-		cpu_set(cpu, per_cpu(cpu_core_map, base +i));
-		cpu_set(base + i, per_cpu(cpu_core_map, cpu));
+		cpumask_set_cpu(cpu, cpu_core_mask(base + i));
+		cpumask_set_cpu(base + i, cpu_core_mask(cpu));
 	}
 	l2_cache = cpu_to_l2cache(cpu);
 	for_each_online_cpu(i) {
@@ -533,8 +547,8 @@
 		if (!np)
 			continue;
 		if (np == l2_cache) {
-			cpu_set(cpu, per_cpu(cpu_core_map, i));
-			cpu_set(i, per_cpu(cpu_core_map, cpu));
+			cpumask_set_cpu(cpu, cpu_core_mask(i));
+			cpumask_set_cpu(i, cpu_core_mask(cpu));
 		}
 		of_node_put(np);
 	}
@@ -554,19 +568,22 @@
 
 void __init smp_cpus_done(unsigned int max_cpus)
 {
-	cpumask_t old_mask;
+	cpumask_var_t old_mask;
 
 	/* We want the setup_cpu() here to be called from CPU 0, but our
 	 * init thread may have been "borrowed" by another CPU in the meantime
 	 * se we pin us down to CPU 0 for a short while
 	 */
-	old_mask = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid));
+	alloc_cpumask_var(&old_mask, GFP_NOWAIT);
+	cpumask_copy(old_mask, &current->cpus_allowed);
+	set_cpus_allowed_ptr(current, cpumask_of(boot_cpuid));
 	
 	if (smp_ops && smp_ops->setup_cpu)
 		smp_ops->setup_cpu(boot_cpuid);
 
-	set_cpus_allowed(current, old_mask);
+	set_cpus_allowed_ptr(current, old_mask);
+
+	free_cpumask_var(old_mask);
 
 	snapshot_timebases();
 
@@ -591,10 +608,10 @@
 	/* Update sibling maps */
 	base = cpu_first_thread_in_core(cpu);
 	for (i = 0; i < threads_per_core; i++) {
-		cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i));
-		cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu));
-		cpu_clear(cpu, per_cpu(cpu_core_map, base +i));
-		cpu_clear(base + i, per_cpu(cpu_core_map, cpu));
+		cpumask_clear_cpu(cpu, cpu_sibling_mask(base + i));
+		cpumask_clear_cpu(base + i, cpu_sibling_mask(cpu));
+		cpumask_clear_cpu(cpu, cpu_core_mask(base + i));
+		cpumask_clear_cpu(base + i, cpu_core_mask(cpu));
 	}
 
 	l2_cache = cpu_to_l2cache(cpu);
@@ -603,8 +620,8 @@
 		if (!np)
 			continue;
 		if (np == l2_cache) {
-			cpu_clear(cpu, per_cpu(cpu_core_map, i));
-			cpu_clear(i, per_cpu(cpu_core_map, cpu));
+			cpumask_clear_cpu(cpu, cpu_core_mask(i));
+			cpumask_clear_cpu(i, cpu_core_mask(cpu));
 		}
 		of_node_put(np);
 	}
@@ -631,4 +648,10 @@
 {
 	mutex_unlock(&powerpc_cpu_hotplug_driver_mutex);
 }
+
+void cpu_die(void)
+{
+	if (ppc_md.cpu_die)
+		ppc_md.cpu_die();
+}
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/swsusp_booke.S linux-libre-2.6.35-gnu/arch/powerpc/kernel/swsusp_booke.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/swsusp_booke.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/swsusp_booke.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,193 @@
+/*
+ * Based on swsusp_32.S, modified for FSL BookE by
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ * Copyright (c) 2009-2010 MontaVista Software, LLC.
+ */
+
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mmu.h>
+
+/*
+ * Structure for storing CPU registers on the save area.
+ */
+#define SL_SP		0
+#define SL_PC		4
+#define SL_MSR		8
+#define SL_TCR		0xc
+#define SL_SPRG0	0x10
+#define SL_SPRG1	0x14
+#define SL_SPRG2	0x18
+#define SL_SPRG3	0x1c
+#define SL_SPRG4	0x20
+#define SL_SPRG5	0x24
+#define SL_SPRG6	0x28
+#define SL_SPRG7	0x2c
+#define SL_TBU		0x30
+#define SL_TBL		0x34
+#define SL_R2		0x38
+#define SL_CR		0x3c
+#define SL_LR		0x40
+#define SL_R12		0x44	/* r12 to r31 */
+#define SL_SIZE		(SL_R12 + 80)
+
+	.section .data
+	.align	5
+
+_GLOBAL(swsusp_save_area)
+	.space	SL_SIZE
+
+
+	.section .text
+	.align	5
+
+_GLOBAL(swsusp_arch_suspend)
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+
+	mflr	r0
+	stw	r0,SL_LR(r11)
+	mfcr	r0
+	stw	r0,SL_CR(r11)
+	stw	r1,SL_SP(r11)
+	stw	r2,SL_R2(r11)
+	stmw	r12,SL_R12(r11)
+
+	/* Save MSR & TCR */
+	mfmsr	r4
+	stw	r4,SL_MSR(r11)
+	mfspr	r4,SPRN_TCR
+	stw	r4,SL_TCR(r11)
+
+	/* Get a stable timebase and save it */
+1:	mfspr	r4,SPRN_TBRU
+	stw	r4,SL_TBU(r11)
+	mfspr	r5,SPRN_TBRL
+	stw	r5,SL_TBL(r11)
+	mfspr	r3,SPRN_TBRU
+	cmpw	r3,r4
+	bne	1b
+
+	/* Save SPRGs */
+	mfsprg	r4,0
+	stw	r4,SL_SPRG0(r11)
+	mfsprg	r4,1
+	stw	r4,SL_SPRG1(r11)
+	mfsprg	r4,2
+	stw	r4,SL_SPRG2(r11)
+	mfsprg	r4,3
+	stw	r4,SL_SPRG3(r11)
+	mfsprg	r4,4
+	stw	r4,SL_SPRG4(r11)
+	mfsprg	r4,5
+	stw	r4,SL_SPRG5(r11)
+	mfsprg	r4,6
+	stw	r4,SL_SPRG6(r11)
+	mfsprg	r4,7
+	stw	r4,SL_SPRG7(r11)
+
+	/* Call the low level suspend stuff (we should probably have made
+	 * a stackframe...
+	 */
+	bl	swsusp_save
+
+	/* Restore LR from the save area */
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+	lwz	r0,SL_LR(r11)
+	mtlr	r0
+
+	blr
+
+_GLOBAL(swsusp_arch_resume)
+	sync
+
+	/* Load ptr the list of pages to copy in r3 */
+	lis	r11,(restore_pblist)@h
+	ori	r11,r11,restore_pblist@l
+	lwz	r3,0(r11)
+
+	/* Copy the pages. This is a very basic implementation, to
+	 * be replaced by something more cache efficient */
+1:
+	li	r0,256
+	mtctr	r0
+	lwz	r5,pbe_address(r3)	/* source */
+	lwz	r6,pbe_orig_address(r3)	/* destination */
+2:
+	lwz	r8,0(r5)
+	lwz	r9,4(r5)
+	lwz	r10,8(r5)
+	lwz	r11,12(r5)
+	addi	r5,r5,16
+	stw	r8,0(r6)
+	stw	r9,4(r6)
+	stw	r10,8(r6)
+	stw	r11,12(r6)
+	addi	r6,r6,16
+	bdnz	2b
+	lwz	r3,pbe_next(r3)
+	cmpwi	0,r3,0
+	bne	1b
+
+	bl flush_dcache_L1
+	bl flush_instruction_cache
+
+	lis	r11,swsusp_save_area@h
+	ori	r11,r11,swsusp_save_area@l
+
+	lwz	r4,SL_SPRG0(r11)
+	mtsprg	0,r4
+	lwz	r4,SL_SPRG1(r11)
+	mtsprg	1,r4
+	lwz	r4,SL_SPRG2(r11)
+	mtsprg	2,r4
+	lwz	r4,SL_SPRG3(r11)
+	mtsprg	3,r4
+	lwz	r4,SL_SPRG4(r11)
+	mtsprg	4,r4
+	lwz	r4,SL_SPRG5(r11)
+	mtsprg	5,r4
+	lwz	r4,SL_SPRG6(r11)
+	mtsprg	6,r4
+	lwz	r4,SL_SPRG7(r11)
+	mtsprg	7,r4
+
+	/* restore the MSR */
+	lwz	r3,SL_MSR(r11)
+	mtmsr	r3
+
+	/* Restore TB */
+	li	r3,0
+	mtspr	SPRN_TBWL,r3
+	lwz	r3,SL_TBU(r11)
+	lwz	r4,SL_TBL(r11)
+	mtspr	SPRN_TBWU,r3
+	mtspr	SPRN_TBWL,r4
+
+	/* Restore TCR and clear any pending bits in TSR. */
+	lwz	r4,SL_TCR(r11)
+	mtspr	SPRN_TCR,r4
+	lis	r4, (TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS)@h
+	mtspr	SPRN_TSR,r4
+
+	/* Kick decrementer */
+	li	r0,1
+	mtdec	r0
+
+	/* Restore the callee-saved registers and return */
+	lwz	r0,SL_CR(r11)
+	mtcr	r0
+	lwz	r2,SL_R2(r11)
+	lmw	r12,SL_R12(r11)
+	lwz	r1,SL_SP(r11)
+	lwz	r0,SL_LR(r11)
+	mtlr	r0
+
+	li	r3,0
+	blr
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/sysfs.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/sysfs.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/sysfs.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/sysfs.c	2010-08-01 18:11:14.000000000 -0400
@@ -35,7 +35,7 @@
 #ifdef CONFIG_PPC64
 
 /* Time in microseconds we delay before sleeping in the idle loop */
-DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 };
+DEFINE_PER_CPU(long, smt_snooze_delay) = { 100 };
 
 static ssize_t store_smt_snooze_delay(struct sys_device *dev,
 				      struct sysdev_attribute *attr,
@@ -44,9 +44,9 @@
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 	ssize_t ret;
-	unsigned long snooze;
+	long snooze;
 
-	ret = sscanf(buf, "%lu", &snooze);
+	ret = sscanf(buf, "%ld", &snooze);
 	if (ret != 1)
 		return -EINVAL;
 
@@ -61,53 +61,23 @@
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
-	return sprintf(buf, "%lu\n", per_cpu(smt_snooze_delay, cpu->sysdev.id));
+	return sprintf(buf, "%ld\n", per_cpu(smt_snooze_delay, cpu->sysdev.id));
 }
 
 static SYSDEV_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay,
 		   store_smt_snooze_delay);
 
-/* Only parse OF options if the matching cmdline option was not specified */
-static int smt_snooze_cmdline;
-
-static int __init smt_setup(void)
-{
-	struct device_node *options;
-	const unsigned int *val;
-	unsigned int cpu;
-
-	if (!cpu_has_feature(CPU_FTR_SMT))
-		return -ENODEV;
-
-	options = of_find_node_by_path("/options");
-	if (!options)
-		return -ENODEV;
-
-	val = of_get_property(options, "ibm,smt-snooze-delay", NULL);
-	if (!smt_snooze_cmdline && val) {
-		for_each_possible_cpu(cpu)
-			per_cpu(smt_snooze_delay, cpu) = *val;
-	}
-
-	of_node_put(options);
-	return 0;
-}
-__initcall(smt_setup);
-
 static int __init setup_smt_snooze_delay(char *str)
 {
 	unsigned int cpu;
-	int snooze;
+	long snooze;
 
 	if (!cpu_has_feature(CPU_FTR_SMT))
 		return 1;
 
-	smt_snooze_cmdline = 1;
-
-	if (get_option(&str, &snooze)) {
-		for_each_possible_cpu(cpu)
-			per_cpu(smt_snooze_delay, cpu) = snooze;
-	}
+	snooze = simple_strtol(str, NULL, 10);
+	for_each_possible_cpu(cpu)
+		per_cpu(smt_snooze_delay, cpu) = snooze;
 
 	return 1;
 }
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/traps.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/traps.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/traps.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/traps.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,5 +1,6 @@
 /*
  *  Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
+ *  Copyright 2007-2010 Freescale Semiconductor, Inc.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
@@ -305,7 +306,7 @@
 #ifndef CONFIG_FSL_BOOKE
 #define get_mc_reason(regs)	((regs)->dsisr)
 #else
-#define get_mc_reason(regs)	(mfspr(SPRN_MCSR) & MCSR_MASK)
+#define get_mc_reason(regs)	(mfspr(SPRN_MCSR))
 #endif
 #define REASON_FP		ESR_FP
 #define REASON_ILLEGAL		(ESR_PIL | ESR_PUO)
@@ -380,7 +381,132 @@
 	}
 	return 0;
 }
+
+int machine_check_47x(struct pt_regs *regs)
+{
+	unsigned long reason = get_mc_reason(regs);
+	u32 mcsr;
+
+	printk(KERN_ERR "Machine check in kernel mode.\n");
+	if (reason & ESR_IMCP) {
+		printk(KERN_ERR
+		       "Instruction Synchronous Machine Check exception\n");
+		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
+		return 0;
+	}
+	mcsr = mfspr(SPRN_MCSR);
+	if (mcsr & MCSR_IB)
+		printk(KERN_ERR "Instruction Read PLB Error\n");
+	if (mcsr & MCSR_DRB)
+		printk(KERN_ERR "Data Read PLB Error\n");
+	if (mcsr & MCSR_DWB)
+		printk(KERN_ERR "Data Write PLB Error\n");
+	if (mcsr & MCSR_TLBP)
+		printk(KERN_ERR "TLB Parity Error\n");
+	if (mcsr & MCSR_ICP) {
+		flush_instruction_cache();
+		printk(KERN_ERR "I-Cache Parity Error\n");
+	}
+	if (mcsr & MCSR_DCSP)
+		printk(KERN_ERR "D-Cache Search Parity Error\n");
+	if (mcsr & PPC47x_MCSR_GPR)
+		printk(KERN_ERR "GPR Parity Error\n");
+	if (mcsr & PPC47x_MCSR_FPR)
+		printk(KERN_ERR "FPR Parity Error\n");
+	if (mcsr & PPC47x_MCSR_IPR)
+		printk(KERN_ERR "Machine Check exception is imprecise\n");
+
+	/* Clear MCSR */
+	mtspr(SPRN_MCSR, mcsr);
+
+	return 0;
+}
 #elif defined(CONFIG_E500)
+int machine_check_e500mc(struct pt_regs *regs)
+{
+	unsigned long mcsr = mfspr(SPRN_MCSR);
+	unsigned long reason = mcsr;
+	int recoverable = 1;
+
+	printk("Machine check in kernel mode.\n");
+	printk("Caused by (from MCSR=%lx): ", reason);
+
+	if (reason & MCSR_MCP)
+		printk("Machine Check Signal\n");
+
+	if (reason & MCSR_ICPERR) {
+		printk("Instruction Cache Parity Error\n");
+
+		/*
+		 * This is recoverable by invalidating the i-cache.
+		 */
+		mtspr(SPRN_L1CSR1, mfspr(SPRN_L1CSR1) | L1CSR1_ICFI);
+		while (mfspr(SPRN_L1CSR1) & L1CSR1_ICFI)
+			;
+
+		/*
+		 * This will generally be accompanied by an instruction
+		 * fetch error report -- only treat MCSR_IF as fatal
+		 * if it wasn't due to an L1 parity error.
+		 */
+		reason &= ~MCSR_IF;
+	}
+
+	if (reason & MCSR_DCPERR_MC) {
+		printk("Data Cache Parity Error\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_L2MMU_MHIT) {
+		printk("Hit on multiple TLB entries\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_NMI)
+		printk("Non-maskable interrupt\n");
+
+	if (reason & MCSR_IF) {
+		printk("Instruction Fetch Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_LD) {
+		printk("Load Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_ST) {
+		printk("Store Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_LDG) {
+		printk("Guarded Load Error Report\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_TLBSYNC)
+		printk("Simultaneous tlbsync operations\n");
+
+	if (reason & MCSR_BSL2_ERR) {
+		printk("Level 2 Cache Error\n");
+		recoverable = 0;
+	}
+
+	if (reason & MCSR_MAV) {
+		u64 addr;
+
+		addr = mfspr(SPRN_MCAR);
+		addr |= (u64)mfspr(SPRN_MCARU) << 32;
+
+		printk("Machine Check %s Address: %#llx\n",
+		       reason & MCSR_MEA ? "Effective" : "Physical", addr);
+	}
+
+	mtspr(SPRN_MCSR, mcsr);
+	return mfspr(SPRN_MCSR) == 0 && recoverable;
+}
+
 int machine_check_e500(struct pt_regs *regs)
 {
 	unsigned long reason = get_mc_reason(regs);
@@ -815,12 +941,15 @@
 		return;
 	}
 	if (reason & REASON_TRAP) {
+		/* Debugger is first in line to stop recursive faults in
+		 * rcu_lock, notify_die, or atomic_notifier_call_chain */
+		if (debugger_bpt(regs))
+			return;
+
 		/* trap exception */
 		if (notify_die(DIE_BPT, "breakpoint", regs, 5, 5, SIGTRAP)
 				== NOTIFY_STOP)
 			return;
-		if (debugger_bpt(regs))
-			return;
 
 		if (!(regs->msr & MSR_PR) &&  /* not user-mode */
 		    report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) {
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/vdso.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/vdso.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/vdso.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/vdso.c	2010-08-01 18:11:14.000000000 -0400
@@ -22,7 +22,7 @@
 #include <linux/elf.h>
 #include <linux/security.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -734,7 +734,7 @@
 	vdso_data->platform = machine_is(iseries) ? 0x200 : 0x100;
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		vdso_data->platform |= 1;
-	vdso_data->physicalMemorySize = lmb_phys_mem_size();
+	vdso_data->physicalMemorySize = memblock_phys_mem_size();
 	vdso_data->dcache_size = ppc64_caches.dsize;
 	vdso_data->dcache_line_size = ppc64_caches.dline_size;
 	vdso_data->icache_size = ppc64_caches.isize;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/vio.c linux-libre-2.6.35-gnu/arch/powerpc/kernel/vio.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/vio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/vio.c	2010-08-01 18:11:14.000000000 -0400
@@ -645,8 +645,10 @@
 			found = 1;
 			break;
 		}
-	if (!found)
+	if (!found) {
+		spin_unlock_irqrestore(&vio_cmo.lock, flags);
 		return;
+	}
 
 	/* Increase/decrease in desired device entitlement */
 	if (desired >= viodev->cmo.desired) {
@@ -705,7 +707,7 @@
 	 * Check to see that device has a DMA window and configure
 	 * entitlement for the device.
 	 */
-	if (of_get_property(viodev->dev.archdata.of_node,
+	if (of_get_property(viodev->dev.of_node,
 	                    "ibm,my-dma-window", NULL)) {
 		/* Check that the driver is CMO enabled and get desired DMA */
 		if (!viodrv->get_desired_dma) {
@@ -958,9 +960,12 @@
 
 static ssize_t name_show(struct device *, struct device_attribute *, char *);
 static ssize_t devspec_show(struct device *, struct device_attribute *, char *);
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+			     char *buf);
 static struct device_attribute vio_cmo_dev_attrs[] = {
 	__ATTR_RO(name),
 	__ATTR_RO(devspec),
+	__ATTR_RO(modalias),
 	__ATTR(cmo_desired,       S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
 	       viodev_cmo_desired_show, viodev_cmo_desired_set),
 	__ATTR(cmo_entitled,      S_IRUGO, viodev_cmo_entitled_show,      NULL),
@@ -1049,7 +1054,7 @@
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
 		return vio_build_iommu_table_iseries(dev);
 
-	dma_window = of_get_property(dev->dev.archdata.of_node,
+	dma_window = of_get_property(dev->dev.of_node,
 				  "ibm,my-dma-window", NULL);
 	if (!dma_window)
 		return NULL;
@@ -1058,7 +1063,7 @@
 	if (tbl == NULL)
 		return NULL;
 
-	of_parse_dma_window(dev->dev.archdata.of_node, dma_window,
+	of_parse_dma_window(dev->dev.of_node, dma_window,
 			    &tbl->it_index, &offset, &size);
 
 	/* TCE table size - measured in tce entries */
@@ -1086,7 +1091,7 @@
 {
 	while (ids->type[0] != '\0') {
 		if ((strncmp(dev->type, ids->type, strlen(ids->type)) == 0) &&
-		    of_device_is_compatible(dev->dev.archdata.of_node,
+		    of_device_is_compatible(dev->dev.of_node,
 					 ids->compat))
 			return ids;
 		ids++;
@@ -1179,7 +1184,7 @@
 static void __devinit vio_dev_release(struct device *dev)
 {
 	/* XXX should free TCE table */
-	of_node_put(dev->archdata.of_node);
+	of_node_put(dev->of_node);
 	kfree(to_vio_dev(dev));
 }
 
@@ -1230,7 +1235,7 @@
 		if (unit_address != NULL)
 			viodev->unit_address = *unit_address;
 	}
-	viodev->dev.archdata.of_node = of_node_get(of_node);
+	viodev->dev.of_node = of_node_get(of_node);
 
 	if (firmware_has_feature(FW_FEATURE_CMO))
 		vio_cmo_set_dma_ops(viodev);
@@ -1315,14 +1320,32 @@
 static ssize_t devspec_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	struct device_node *of_node = dev->archdata.of_node;
+	struct device_node *of_node = dev->of_node;
 
 	return sprintf(buf, "%s\n", of_node ? of_node->full_name : "none");
 }
 
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	const struct vio_dev *vio_dev = to_vio_dev(dev);
+	struct device_node *dn;
+	const char *cp;
+
+	dn = dev->of_node;
+	if (!dn)
+		return -ENODEV;
+	cp = of_get_property(dn, "compatible", NULL);
+	if (!cp)
+		return -ENODEV;
+
+	return sprintf(buf, "vio:T%sS%s\n", vio_dev->type, cp);
+}
+
 static struct device_attribute vio_dev_attrs[] = {
 	__ATTR_RO(name),
 	__ATTR_RO(devspec),
+	__ATTR_RO(modalias),
 	__ATTR_NULL
 };
 
@@ -1347,7 +1370,7 @@
 	struct device_node *dn;
 	const char *cp;
 
-	dn = dev->archdata.of_node;
+	dn = dev->of_node;
 	if (!dn)
 		return -ENODEV;
 	cp = of_get_property(dn, "compatible", NULL);
@@ -1365,6 +1388,7 @@
 	.match = vio_bus_match,
 	.probe = vio_bus_probe,
 	.remove = vio_bus_remove,
+	.pm = GENERIC_SUBSYS_PM_OPS,
 };
 
 /**
@@ -1378,7 +1402,7 @@
 */
 const void *vio_get_attribute(struct vio_dev *vdev, char *which, int *length)
 {
-	return of_get_property(vdev->dev.archdata.of_node, which, length);
+	return of_get_property(vdev->dev.of_node, which, length);
 }
 EXPORT_SYMBOL(vio_get_attribute);
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kernel/vmlinux.lds.S linux-libre-2.6.35-gnu/arch/powerpc/kernel/vmlinux.lds.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kernel/vmlinux.lds.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kernel/vmlinux.lds.S	2010-08-01 18:11:14.000000000 -0400
@@ -223,19 +223,17 @@
 #endif
 
 	/* The initial task and kernel stack */
-	.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-		INIT_TASK_DATA(THREAD_SIZE)
-	}
+	INIT_TASK_DATA_SECTION(THREAD_SIZE)
 
-	.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+	.data..page_aligned : AT(ADDR(.data..page_aligned) - LOAD_OFFSET) {
 		PAGE_ALIGNED_DATA(PAGE_SIZE)
 	}
 
-	.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+	.data..cacheline_aligned : AT(ADDR(.data..cacheline_aligned) - LOAD_OFFSET) {
 		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 	}
 
-	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+	.data..read_mostly : AT(ADDR(.data..read_mostly) - LOAD_OFFSET) {
 		READ_MOSTLY_DATA(L1_CACHE_BYTES)
 	}
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/44x.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/44x.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/44x.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/44x.c	2010-08-01 18:11:14.000000000 -0400
@@ -147,7 +147,7 @@
 	if (r)
 		return r;
 
-	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_44x), THIS_MODULE);
+	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_44x), 0, THIS_MODULE);
 }
 
 static void __exit kvmppc_44x_exit(void)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_32_mmu.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_32_mmu.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_32_mmu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_32_mmu.c	2010-08-01 18:11:14.000000000 -0400
@@ -37,7 +37,7 @@
 #define dprintk(X...) do { } while(0)
 #endif
 
-#ifdef DEBUG_PTE
+#ifdef DEBUG_MMU_PTE
 #define dprintk_pte(X...) printk(KERN_INFO X)
 #else
 #define dprintk_pte(X...) do { } while(0)
@@ -45,6 +45,9 @@
 
 #define PTEG_FLAG_ACCESSED	0x00000100
 #define PTEG_FLAG_DIRTY		0x00000080
+#ifndef SID_SHIFT
+#define SID_SHIFT		28
+#endif
 
 static inline bool check_debug_ip(struct kvm_vcpu *vcpu)
 {
@@ -57,6 +60,8 @@
 
 static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
 					  struct kvmppc_pte *pte, bool data);
+static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid,
+					     u64 *vsid);
 
 static struct kvmppc_sr *find_sr(struct kvmppc_vcpu_book3s *vcpu_book3s, gva_t eaddr)
 {
@@ -66,13 +71,14 @@
 static u64 kvmppc_mmu_book3s_32_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr,
 					 bool data)
 {
-	struct kvmppc_sr *sre = find_sr(to_book3s(vcpu), eaddr);
+	u64 vsid;
 	struct kvmppc_pte pte;
 
 	if (!kvmppc_mmu_book3s_32_xlate_bat(vcpu, eaddr, &pte, data))
 		return pte.vpage;
 
-	return (((u64)eaddr >> 12) & 0xffff) | (((u64)sre->vsid) << 16);
+	kvmppc_mmu_book3s_32_esid_to_vsid(vcpu, eaddr >> SID_SHIFT, &vsid);
+	return (((u64)eaddr >> 12) & 0xffff) | (vsid << 16);
 }
 
 static void kvmppc_mmu_book3s_32_reset_msr(struct kvm_vcpu *vcpu)
@@ -142,8 +148,13 @@
 				    bat->bepi_mask);
 		}
 		if ((eaddr & bat->bepi_mask) == bat->bepi) {
+			u64 vsid;
+			kvmppc_mmu_book3s_32_esid_to_vsid(vcpu,
+				eaddr >> SID_SHIFT, &vsid);
+			vsid <<= 16;
+			pte->vpage = (((u64)eaddr >> 12) & 0xffff) | vsid;
+
 			pte->raddr = bat->brpn | (eaddr & ~bat->bepi_mask);
-			pte->vpage = (eaddr >> 12) | VSID_BAT;
 			pte->may_read = bat->pp;
 			pte->may_write = bat->pp > 1;
 			pte->may_execute = true;
@@ -172,7 +183,7 @@
 	struct kvmppc_sr *sre;
 	hva_t ptegp;
 	u32 pteg[16];
-	u64 ptem = 0;
+	u32 ptem = 0;
 	int i;
 	int found = 0;
 
@@ -302,6 +313,7 @@
 	/* And then put in the new SR */
 	sre->raw = value;
 	sre->vsid = (value & 0x0fffffff);
+	sre->valid = (value & 0x80000000) ? false : true;
 	sre->Ks = (value & 0x40000000) ? true : false;
 	sre->Kp = (value & 0x20000000) ? true : false;
 	sre->nx = (value & 0x10000000) ? true : false;
@@ -312,36 +324,48 @@
 
 static void kvmppc_mmu_book3s_32_tlbie(struct kvm_vcpu *vcpu, ulong ea, bool large)
 {
-	kvmppc_mmu_pte_flush(vcpu, ea, ~0xFFFULL);
+	kvmppc_mmu_pte_flush(vcpu, ea, 0x0FFFF000);
 }
 
-static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
+static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid,
 					     u64 *vsid)
 {
+	ulong ea = esid << SID_SHIFT;
+	struct kvmppc_sr *sr;
+	u64 gvsid = esid;
+
+	if (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+		sr = find_sr(to_book3s(vcpu), ea);
+		if (sr->valid)
+			gvsid = sr->vsid;
+	}
+
 	/* In case we only have one of MSR_IR or MSR_DR set, let's put
 	   that in the real-mode context (and hope RM doesn't access
 	   high memory) */
 	switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
 	case 0:
-		*vsid = (VSID_REAL >> 16) | esid;
+		*vsid = VSID_REAL | esid;
 		break;
 	case MSR_IR:
-		*vsid = (VSID_REAL_IR >> 16) | esid;
+		*vsid = VSID_REAL_IR | gvsid;
 		break;
 	case MSR_DR:
-		*vsid = (VSID_REAL_DR >> 16) | esid;
+		*vsid = VSID_REAL_DR | gvsid;
 		break;
 	case MSR_DR|MSR_IR:
-	{
-		ulong ea;
-		ea = esid << SID_SHIFT;
-		*vsid = find_sr(to_book3s(vcpu), ea)->vsid;
+		if (!sr->valid)
+			return -1;
+
+		*vsid = sr->vsid;
 		break;
-	}
 	default:
 		BUG();
 	}
 
+	if (vcpu->arch.msr & MSR_PR)
+		*vsid |= VSID_PR;
+
 	return 0;
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_32_mmu_host.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_32_mmu_host.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_32_mmu_host.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_32_mmu_host.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,483 @@
+/*
+ * Copyright (C) 2010 SUSE Linux Products GmbH. All rights reserved.
+ *
+ * Authors:
+ *     Alexander Graf <agraf@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+#include <asm/mmu-hash32.h>
+#include <asm/machdep.h>
+#include <asm/mmu_context.h>
+#include <asm/hw_irq.h>
+
+/* #define DEBUG_MMU */
+/* #define DEBUG_SR */
+
+#ifdef DEBUG_MMU
+#define dprintk_mmu(a, ...) printk(KERN_INFO a, __VA_ARGS__)
+#else
+#define dprintk_mmu(a, ...) do { } while(0)
+#endif
+
+#ifdef DEBUG_SR
+#define dprintk_sr(a, ...) printk(KERN_INFO a, __VA_ARGS__)
+#else
+#define dprintk_sr(a, ...) do { } while(0)
+#endif
+
+#if PAGE_SHIFT != 12
+#error Unknown page size
+#endif
+
+#ifdef CONFIG_SMP
+#error XXX need to grab mmu_hash_lock
+#endif
+
+#ifdef CONFIG_PTE_64BIT
+#error Only 32 bit pages are supported for now
+#endif
+
+static ulong htab;
+static u32 htabmask;
+
+static void invalidate_pte(struct kvm_vcpu *vcpu, struct hpte_cache *pte)
+{
+	volatile u32 *pteg;
+
+	dprintk_mmu("KVM: Flushing SPTE: 0x%llx (0x%llx) -> 0x%llx\n",
+		    pte->pte.eaddr, pte->pte.vpage, pte->host_va);
+
+	pteg = (u32*)pte->slot;
+
+	pteg[0] = 0;
+	asm volatile ("sync");
+	asm volatile ("tlbie %0" : : "r" (pte->pte.eaddr) : "memory");
+	asm volatile ("sync");
+	asm volatile ("tlbsync");
+
+	pte->host_va = 0;
+
+	if (pte->pte.may_write)
+		kvm_release_pfn_dirty(pte->pfn);
+	else
+		kvm_release_pfn_clean(pte->pfn);
+}
+
+void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, ulong guest_ea, ulong ea_mask)
+{
+	int i;
+
+	dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%x & 0x%x\n",
+		    vcpu->arch.hpte_cache_offset, guest_ea, ea_mask);
+	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+	guest_ea &= ea_mask;
+	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+		struct hpte_cache *pte;
+
+		pte = &vcpu->arch.hpte_cache[i];
+		if (!pte->host_va)
+			continue;
+
+		if ((pte->pte.eaddr & ea_mask) == guest_ea) {
+			invalidate_pte(vcpu, pte);
+		}
+	}
+
+	/* Doing a complete flush -> start from scratch */
+	if (!ea_mask)
+		vcpu->arch.hpte_cache_offset = 0;
+}
+
+void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 guest_vp, u64 vp_mask)
+{
+	int i;
+
+	dprintk_mmu("KVM: Flushing %d Shadow vPTEs: 0x%llx & 0x%llx\n",
+		    vcpu->arch.hpte_cache_offset, guest_vp, vp_mask);
+	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+	guest_vp &= vp_mask;
+	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+		struct hpte_cache *pte;
+
+		pte = &vcpu->arch.hpte_cache[i];
+		if (!pte->host_va)
+			continue;
+
+		if ((pte->pte.vpage & vp_mask) == guest_vp) {
+			invalidate_pte(vcpu, pte);
+		}
+	}
+}
+
+void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, ulong pa_start, ulong pa_end)
+{
+	int i;
+
+	dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%llx & 0x%llx\n",
+		    vcpu->arch.hpte_cache_offset, pa_start, pa_end);
+	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+		struct hpte_cache *pte;
+
+		pte = &vcpu->arch.hpte_cache[i];
+		if (!pte->host_va)
+			continue;
+
+		if ((pte->pte.raddr >= pa_start) &&
+		    (pte->pte.raddr < pa_end)) {
+			invalidate_pte(vcpu, pte);
+		}
+	}
+}
+
+struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data)
+{
+	int i;
+	u64 guest_vp;
+
+	guest_vp = vcpu->arch.mmu.ea_to_vp(vcpu, ea, false);
+	for (i=0; i<vcpu->arch.hpte_cache_offset; i++) {
+		struct hpte_cache *pte;
+
+		pte = &vcpu->arch.hpte_cache[i];
+		if (!pte->host_va)
+			continue;
+
+		if (pte->pte.vpage == guest_vp)
+			return &pte->pte;
+	}
+
+	return NULL;
+}
+
+static int kvmppc_mmu_hpte_cache_next(struct kvm_vcpu *vcpu)
+{
+	if (vcpu->arch.hpte_cache_offset == HPTEG_CACHE_NUM)
+		kvmppc_mmu_pte_flush(vcpu, 0, 0);
+
+	return vcpu->arch.hpte_cache_offset++;
+}
+
+/* We keep 512 gvsid->hvsid entries, mapping the guest ones to the array using
+ * a hash, so we don't waste cycles on looping */
+static u16 kvmppc_sid_hash(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+	return (u16)(((gvsid >> (SID_MAP_BITS * 7)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 6)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 5)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 4)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 3)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 2)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 1)) & SID_MAP_MASK) ^
+		     ((gvsid >> (SID_MAP_BITS * 0)) & SID_MAP_MASK));
+}
+
+
+static struct kvmppc_sid_map *find_sid_vsid(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+	struct kvmppc_sid_map *map;
+	u16 sid_map_mask;
+
+	if (vcpu->arch.msr & MSR_PR)
+		gvsid |= VSID_PR;
+
+	sid_map_mask = kvmppc_sid_hash(vcpu, gvsid);
+	map = &to_book3s(vcpu)->sid_map[sid_map_mask];
+	if (map->guest_vsid == gvsid) {
+		dprintk_sr("SR: Searching 0x%llx -> 0x%llx\n",
+			    gvsid, map->host_vsid);
+		return map;
+	}
+
+	map = &to_book3s(vcpu)->sid_map[SID_MAP_MASK - sid_map_mask];
+	if (map->guest_vsid == gvsid) {
+		dprintk_sr("SR: Searching 0x%llx -> 0x%llx\n",
+			    gvsid, map->host_vsid);
+		return map;
+	}
+
+	dprintk_sr("SR: Searching 0x%llx -> not found\n", gvsid);
+	return NULL;
+}
+
+static u32 *kvmppc_mmu_get_pteg(struct kvm_vcpu *vcpu, u32 vsid, u32 eaddr,
+				bool primary)
+{
+	u32 page, hash;
+	ulong pteg = htab;
+
+	page = (eaddr & ~ESID_MASK) >> 12;
+
+	hash = ((vsid ^ page) << 6);
+	if (!primary)
+		hash = ~hash;
+
+	hash &= htabmask;
+
+	pteg |= hash;
+
+	dprintk_mmu("htab: %lx | hash: %x | htabmask: %x | pteg: %lx\n",
+		htab, hash, htabmask, pteg);
+
+	return (u32*)pteg;
+}
+
+extern char etext[];
+
+int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
+{
+	pfn_t hpaddr;
+	u64 va;
+	u64 vsid;
+	struct kvmppc_sid_map *map;
+	volatile u32 *pteg;
+	u32 eaddr = orig_pte->eaddr;
+	u32 pteg0, pteg1;
+	register int rr = 0;
+	bool primary = false;
+	bool evict = false;
+	int hpte_id;
+	struct hpte_cache *pte;
+
+	/* Get host physical address for gpa */
+	hpaddr = gfn_to_pfn(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT);
+	if (kvm_is_error_hva(hpaddr)) {
+		printk(KERN_INFO "Couldn't get guest page for gfn %lx!\n",
+				 orig_pte->eaddr);
+		return -EINVAL;
+	}
+	hpaddr <<= PAGE_SHIFT;
+
+	/* and write the mapping ea -> hpa into the pt */
+	vcpu->arch.mmu.esid_to_vsid(vcpu, orig_pte->eaddr >> SID_SHIFT, &vsid);
+	map = find_sid_vsid(vcpu, vsid);
+	if (!map) {
+		kvmppc_mmu_map_segment(vcpu, eaddr);
+		map = find_sid_vsid(vcpu, vsid);
+	}
+	BUG_ON(!map);
+
+	vsid = map->host_vsid;
+	va = (vsid << SID_SHIFT) | (eaddr & ~ESID_MASK);
+
+next_pteg:
+	if (rr == 16) {
+		primary = !primary;
+		evict = true;
+		rr = 0;
+	}
+
+	pteg = kvmppc_mmu_get_pteg(vcpu, vsid, eaddr, primary);
+
+	/* not evicting yet */
+	if (!evict && (pteg[rr] & PTE_V)) {
+		rr += 2;
+		goto next_pteg;
+	}
+
+	dprintk_mmu("KVM: old PTEG: %p (%d)\n", pteg, rr);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[0], pteg[1]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[2], pteg[3]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[4], pteg[5]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[6], pteg[7]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[8], pteg[9]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[10], pteg[11]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[12], pteg[13]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[14], pteg[15]);
+
+	pteg0 = ((eaddr & 0x0fffffff) >> 22) | (vsid << 7) | PTE_V |
+		(primary ? 0 : PTE_SEC);
+	pteg1 = hpaddr | PTE_M | PTE_R | PTE_C;
+
+	if (orig_pte->may_write) {
+		pteg1 |= PP_RWRW;
+		mark_page_dirty(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT);
+	} else {
+		pteg1 |= PP_RWRX;
+	}
+
+	local_irq_disable();
+
+	if (pteg[rr]) {
+		pteg[rr] = 0;
+		asm volatile ("sync");
+	}
+	pteg[rr + 1] = pteg1;
+	pteg[rr] = pteg0;
+	asm volatile ("sync");
+
+	local_irq_enable();
+
+	dprintk_mmu("KVM: new PTEG: %p\n", pteg);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[0], pteg[1]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[2], pteg[3]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[4], pteg[5]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[6], pteg[7]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[8], pteg[9]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[10], pteg[11]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[12], pteg[13]);
+	dprintk_mmu("KVM:   %08x - %08x\n", pteg[14], pteg[15]);
+
+
+	/* Now tell our Shadow PTE code about the new page */
+
+	hpte_id = kvmppc_mmu_hpte_cache_next(vcpu);
+	pte = &vcpu->arch.hpte_cache[hpte_id];
+
+	dprintk_mmu("KVM: %c%c Map 0x%llx: [%lx] 0x%llx (0x%llx) -> %lx\n",
+		    orig_pte->may_write ? 'w' : '-',
+		    orig_pte->may_execute ? 'x' : '-',
+		    orig_pte->eaddr, (ulong)pteg, va,
+		    orig_pte->vpage, hpaddr);
+
+	pte->slot = (ulong)&pteg[rr];
+	pte->host_va = va;
+	pte->pte = *orig_pte;
+	pte->pfn = hpaddr >> PAGE_SHIFT;
+
+	return 0;
+}
+
+static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+	struct kvmppc_sid_map *map;
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	u16 sid_map_mask;
+	static int backwards_map = 0;
+
+	if (vcpu->arch.msr & MSR_PR)
+		gvsid |= VSID_PR;
+
+	/* We might get collisions that trap in preceding order, so let's
+	   map them differently */
+
+	sid_map_mask = kvmppc_sid_hash(vcpu, gvsid);
+	if (backwards_map)
+		sid_map_mask = SID_MAP_MASK - sid_map_mask;
+
+	map = &to_book3s(vcpu)->sid_map[sid_map_mask];
+
+	/* Make sure we're taking the other map next time */
+	backwards_map = !backwards_map;
+
+	/* Uh-oh ... out of mappings. Let's flush! */
+	if (vcpu_book3s->vsid_next >= vcpu_book3s->vsid_max) {
+		vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+		memset(vcpu_book3s->sid_map, 0,
+		       sizeof(struct kvmppc_sid_map) * SID_MAP_NUM);
+		kvmppc_mmu_pte_flush(vcpu, 0, 0);
+		kvmppc_mmu_flush_segments(vcpu);
+	}
+	map->host_vsid = vcpu_book3s->vsid_next;
+
+	/* Would have to be 111 to be completely aligned with the rest of
+	   Linux, but that is just way too little space! */
+	vcpu_book3s->vsid_next+=1;
+
+	map->guest_vsid = gvsid;
+	map->valid = true;
+
+	return map;
+}
+
+int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr)
+{
+	u32 esid = eaddr >> SID_SHIFT;
+	u64 gvsid;
+	u32 sr;
+	struct kvmppc_sid_map *map;
+	struct kvmppc_book3s_shadow_vcpu *svcpu = to_svcpu(vcpu);
+
+	if (vcpu->arch.mmu.esid_to_vsid(vcpu, esid, &gvsid)) {
+		/* Invalidate an entry */
+		svcpu->sr[esid] = SR_INVALID;
+		return -ENOENT;
+	}
+
+	map = find_sid_vsid(vcpu, gvsid);
+	if (!map)
+		map = create_sid_map(vcpu, gvsid);
+
+	map->guest_esid = esid;
+	sr = map->host_vsid | SR_KP;
+	svcpu->sr[esid] = sr;
+
+	dprintk_sr("MMU: mtsr %d, 0x%x\n", esid, sr);
+
+	return 0;
+}
+
+void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu)
+{
+	int i;
+	struct kvmppc_book3s_shadow_vcpu *svcpu = to_svcpu(vcpu);
+
+	dprintk_sr("MMU: flushing all segments (%d)\n", ARRAY_SIZE(svcpu->sr));
+	for (i = 0; i < ARRAY_SIZE(svcpu->sr); i++)
+		svcpu->sr[i] = SR_INVALID;
+}
+
+void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
+{
+	kvmppc_mmu_pte_flush(vcpu, 0, 0);
+	preempt_disable();
+	__destroy_context(to_book3s(vcpu)->context_id);
+	preempt_enable();
+}
+
+/* From mm/mmu_context_hash32.c */
+#define CTX_TO_VSID(ctx) (((ctx) * (897 * 16)) & 0xffffff)
+
+int kvmppc_mmu_init(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
+	int err;
+	ulong sdr1;
+
+	err = __init_new_context();
+	if (err < 0)
+		return -1;
+	vcpu3s->context_id = err;
+
+	vcpu3s->vsid_max = CTX_TO_VSID(vcpu3s->context_id + 1) - 1;
+	vcpu3s->vsid_first = CTX_TO_VSID(vcpu3s->context_id);
+
+#if 0 /* XXX still doesn't guarantee uniqueness */
+	/* We could collide with the Linux vsid space because the vsid
+	 * wraps around at 24 bits. We're safe if we do our own space
+	 * though, so let's always set the highest bit. */
+
+	vcpu3s->vsid_max |= 0x00800000;
+	vcpu3s->vsid_first |= 0x00800000;
+#endif
+	BUG_ON(vcpu3s->vsid_max < vcpu3s->vsid_first);
+
+	vcpu3s->vsid_next = vcpu3s->vsid_first;
+
+	/* Remember where the HTAB is */
+	asm ( "mfsdr1 %0" : "=r"(sdr1) );
+	htabmask = ((sdr1 & 0x1FF) << 16) | 0xFFC0;
+	htab = (ulong)__va(sdr1 & 0xffff0000);
+
+	return 0;
+}
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_32_sr.S linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_32_sr.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_32_sr.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_32_sr.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,143 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+/******************************************************************************
+ *                                                                            *
+ *                               Entry code                                   *
+ *                                                                            *
+ *****************************************************************************/
+
+.macro LOAD_GUEST_SEGMENTS
+
+	/* Required state:
+	 *
+	 * MSR = ~IR|DR
+	 * R1 = host R1
+	 * R2 = host R2
+	 * R3 = shadow vcpu
+	 * all other volatile GPRS = free
+	 * SVCPU[CR]  = guest CR
+	 * SVCPU[XER] = guest XER
+	 * SVCPU[CTR] = guest CTR
+	 * SVCPU[LR]  = guest LR
+	 */
+
+#define XCHG_SR(n)	lwz	r9, (SVCPU_SR+(n*4))(r3);  \
+			mtsr	n, r9
+
+	XCHG_SR(0)
+	XCHG_SR(1)
+	XCHG_SR(2)
+	XCHG_SR(3)
+	XCHG_SR(4)
+	XCHG_SR(5)
+	XCHG_SR(6)
+	XCHG_SR(7)
+	XCHG_SR(8)
+	XCHG_SR(9)
+	XCHG_SR(10)
+	XCHG_SR(11)
+	XCHG_SR(12)
+	XCHG_SR(13)
+	XCHG_SR(14)
+	XCHG_SR(15)
+
+	/* Clear BATs. */
+
+#define KVM_KILL_BAT(n, reg)		\
+        mtspr   SPRN_IBAT##n##U,reg;	\
+        mtspr   SPRN_IBAT##n##L,reg;	\
+        mtspr   SPRN_DBAT##n##U,reg;	\
+        mtspr   SPRN_DBAT##n##L,reg;	\
+
+        li	r9, 0
+	KVM_KILL_BAT(0, r9)
+	KVM_KILL_BAT(1, r9)
+	KVM_KILL_BAT(2, r9)
+	KVM_KILL_BAT(3, r9)
+
+.endm
+
+/******************************************************************************
+ *                                                                            *
+ *                               Exit code                                    *
+ *                                                                            *
+ *****************************************************************************/
+
+.macro LOAD_HOST_SEGMENTS
+
+	/* Register usage at this point:
+	 *
+	 * R1         = host R1
+	 * R2         = host R2
+	 * R12        = exit handler id
+	 * R13        = shadow vcpu - SHADOW_VCPU_OFF
+	 * SVCPU.*    = guest *
+	 * SVCPU[CR]  = guest CR
+	 * SVCPU[XER] = guest XER
+	 * SVCPU[CTR] = guest CTR
+	 * SVCPU[LR]  = guest LR
+	 *
+	 */
+
+	/* Restore BATs */
+
+	/* We only overwrite the upper part, so we only restoree
+	   the upper part. */
+#define KVM_LOAD_BAT(n, reg, RA, RB)	\
+	lwz	RA,(n*16)+0(reg);	\
+	lwz	RB,(n*16)+4(reg);	\
+	mtspr	SPRN_IBAT##n##U,RA;	\
+	mtspr	SPRN_IBAT##n##L,RB;	\
+	lwz	RA,(n*16)+8(reg);	\
+	lwz	RB,(n*16)+12(reg);	\
+	mtspr	SPRN_DBAT##n##U,RA;	\
+	mtspr	SPRN_DBAT##n##L,RB;	\
+
+	lis     r9, BATS@ha
+	addi    r9, r9, BATS@l
+	tophys(r9, r9)
+	KVM_LOAD_BAT(0, r9, r10, r11)
+	KVM_LOAD_BAT(1, r9, r10, r11)
+	KVM_LOAD_BAT(2, r9, r10, r11)
+	KVM_LOAD_BAT(3, r9, r10, r11)
+
+	/* Restore Segment Registers */
+
+	/* 0xc - 0xf */
+
+        li      r0, 4
+        mtctr   r0
+	LOAD_REG_IMMEDIATE(r3, 0x20000000 | (0x111 * 0xc))
+        lis     r4, 0xc000
+3:      mtsrin  r3, r4
+        addi    r3, r3, 0x111     /* increment VSID */
+        addis   r4, r4, 0x1000    /* address of next segment */
+        bdnz    3b
+
+	/* 0x0 - 0xb */
+
+	/* 'current->mm' needs to be in r4 */
+	tophys(r4, r2)
+	lwz	r4, MM(r4)
+	tophys(r4, r4)
+	/* This only clobbers r0, r3, r4 and r5 */
+	bl	switch_mmu_context
+
+.endm
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_emulate.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_emulate.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_emulate.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_emulate.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,348 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright SUSE Linux Products GmbH 2009
- *
- * Authors: Alexander Graf <agraf@suse.de>
- */
-
-#include <asm/kvm_ppc.h>
-#include <asm/disassemble.h>
-#include <asm/kvm_book3s.h>
-#include <asm/reg.h>
-
-#define OP_19_XOP_RFID		18
-#define OP_19_XOP_RFI		50
-
-#define OP_31_XOP_MFMSR		83
-#define OP_31_XOP_MTMSR		146
-#define OP_31_XOP_MTMSRD	178
-#define OP_31_XOP_MTSRIN	242
-#define OP_31_XOP_TLBIEL	274
-#define OP_31_XOP_TLBIE		306
-#define OP_31_XOP_SLBMTE	402
-#define OP_31_XOP_SLBIE		434
-#define OP_31_XOP_SLBIA		498
-#define OP_31_XOP_MFSRIN	659
-#define OP_31_XOP_SLBMFEV	851
-#define OP_31_XOP_EIOIO		854
-#define OP_31_XOP_SLBMFEE	915
-
-/* DCBZ is actually 1014, but we patch it to 1010 so we get a trap */
-#define OP_31_XOP_DCBZ		1010
-
-int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
-                           unsigned int inst, int *advance)
-{
-	int emulated = EMULATE_DONE;
-
-	switch (get_op(inst)) {
-	case 19:
-		switch (get_xop(inst)) {
-		case OP_19_XOP_RFID:
-		case OP_19_XOP_RFI:
-			vcpu->arch.pc = vcpu->arch.srr0;
-			kvmppc_set_msr(vcpu, vcpu->arch.srr1);
-			*advance = 0;
-			break;
-
-		default:
-			emulated = EMULATE_FAIL;
-			break;
-		}
-		break;
-	case 31:
-		switch (get_xop(inst)) {
-		case OP_31_XOP_MFMSR:
-			kvmppc_set_gpr(vcpu, get_rt(inst), vcpu->arch.msr);
-			break;
-		case OP_31_XOP_MTMSRD:
-		{
-			ulong rs = kvmppc_get_gpr(vcpu, get_rs(inst));
-			if (inst & 0x10000) {
-				vcpu->arch.msr &= ~(MSR_RI | MSR_EE);
-				vcpu->arch.msr |= rs & (MSR_RI | MSR_EE);
-			} else
-				kvmppc_set_msr(vcpu, rs);
-			break;
-		}
-		case OP_31_XOP_MTMSR:
-			kvmppc_set_msr(vcpu, kvmppc_get_gpr(vcpu, get_rs(inst)));
-			break;
-		case OP_31_XOP_MFSRIN:
-		{
-			int srnum;
-
-			srnum = (kvmppc_get_gpr(vcpu, get_rb(inst)) >> 28) & 0xf;
-			if (vcpu->arch.mmu.mfsrin) {
-				u32 sr;
-				sr = vcpu->arch.mmu.mfsrin(vcpu, srnum);
-				kvmppc_set_gpr(vcpu, get_rt(inst), sr);
-			}
-			break;
-		}
-		case OP_31_XOP_MTSRIN:
-			vcpu->arch.mmu.mtsrin(vcpu,
-				(kvmppc_get_gpr(vcpu, get_rb(inst)) >> 28) & 0xf,
-				kvmppc_get_gpr(vcpu, get_rs(inst)));
-			break;
-		case OP_31_XOP_TLBIE:
-		case OP_31_XOP_TLBIEL:
-		{
-			bool large = (inst & 0x00200000) ? true : false;
-			ulong addr = kvmppc_get_gpr(vcpu, get_rb(inst));
-			vcpu->arch.mmu.tlbie(vcpu, addr, large);
-			break;
-		}
-		case OP_31_XOP_EIOIO:
-			break;
-		case OP_31_XOP_SLBMTE:
-			if (!vcpu->arch.mmu.slbmte)
-				return EMULATE_FAIL;
-
-			vcpu->arch.mmu.slbmte(vcpu,
-					kvmppc_get_gpr(vcpu, get_rs(inst)),
-					kvmppc_get_gpr(vcpu, get_rb(inst)));
-			break;
-		case OP_31_XOP_SLBIE:
-			if (!vcpu->arch.mmu.slbie)
-				return EMULATE_FAIL;
-
-			vcpu->arch.mmu.slbie(vcpu,
-					kvmppc_get_gpr(vcpu, get_rb(inst)));
-			break;
-		case OP_31_XOP_SLBIA:
-			if (!vcpu->arch.mmu.slbia)
-				return EMULATE_FAIL;
-
-			vcpu->arch.mmu.slbia(vcpu);
-			break;
-		case OP_31_XOP_SLBMFEE:
-			if (!vcpu->arch.mmu.slbmfee) {
-				emulated = EMULATE_FAIL;
-			} else {
-				ulong t, rb;
-
-				rb = kvmppc_get_gpr(vcpu, get_rb(inst));
-				t = vcpu->arch.mmu.slbmfee(vcpu, rb);
-				kvmppc_set_gpr(vcpu, get_rt(inst), t);
-			}
-			break;
-		case OP_31_XOP_SLBMFEV:
-			if (!vcpu->arch.mmu.slbmfev) {
-				emulated = EMULATE_FAIL;
-			} else {
-				ulong t, rb;
-
-				rb = kvmppc_get_gpr(vcpu, get_rb(inst));
-				t = vcpu->arch.mmu.slbmfev(vcpu, rb);
-				kvmppc_set_gpr(vcpu, get_rt(inst), t);
-			}
-			break;
-		case OP_31_XOP_DCBZ:
-		{
-			ulong rb = kvmppc_get_gpr(vcpu, get_rb(inst));
-			ulong ra = 0;
-			ulong addr;
-			u32 zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
-
-			if (get_ra(inst))
-				ra = kvmppc_get_gpr(vcpu, get_ra(inst));
-
-			addr = (ra + rb) & ~31ULL;
-			if (!(vcpu->arch.msr & MSR_SF))
-				addr &= 0xffffffff;
-
-			if (kvmppc_st(vcpu, addr, 32, zeros)) {
-				vcpu->arch.dear = addr;
-				vcpu->arch.fault_dear = addr;
-				to_book3s(vcpu)->dsisr = DSISR_PROTFAULT |
-						      DSISR_ISSTORE;
-				kvmppc_book3s_queue_irqprio(vcpu,
-					BOOK3S_INTERRUPT_DATA_STORAGE);
-				kvmppc_mmu_pte_flush(vcpu, addr, ~0xFFFULL);
-			}
-
-			break;
-		}
-		default:
-			emulated = EMULATE_FAIL;
-		}
-		break;
-	default:
-		emulated = EMULATE_FAIL;
-	}
-
-	return emulated;
-}
-
-void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat, bool upper,
-                    u32 val)
-{
-	if (upper) {
-		/* Upper BAT */
-		u32 bl = (val >> 2) & 0x7ff;
-		bat->bepi_mask = (~bl << 17);
-		bat->bepi = val & 0xfffe0000;
-		bat->vs = (val & 2) ? 1 : 0;
-		bat->vp = (val & 1) ? 1 : 0;
-		bat->raw = (bat->raw & 0xffffffff00000000ULL) | val;
-	} else {
-		/* Lower BAT */
-		bat->brpn = val & 0xfffe0000;
-		bat->wimg = (val >> 3) & 0xf;
-		bat->pp = val & 3;
-		bat->raw = (bat->raw & 0x00000000ffffffffULL) | ((u64)val << 32);
-	}
-}
-
-static void kvmppc_write_bat(struct kvm_vcpu *vcpu, int sprn, u32 val)
-{
-	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
-	struct kvmppc_bat *bat;
-
-	switch (sprn) {
-	case SPRN_IBAT0U ... SPRN_IBAT3L:
-		bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT0U) / 2];
-		break;
-	case SPRN_IBAT4U ... SPRN_IBAT7L:
-		bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT4U) / 2];
-		break;
-	case SPRN_DBAT0U ... SPRN_DBAT3L:
-		bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT0U) / 2];
-		break;
-	case SPRN_DBAT4U ... SPRN_DBAT7L:
-		bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT4U) / 2];
-		break;
-	default:
-		BUG();
-	}
-
-	kvmppc_set_bat(vcpu, bat, !(sprn % 2), val);
-}
-
-int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
-{
-	int emulated = EMULATE_DONE;
-	ulong spr_val = kvmppc_get_gpr(vcpu, rs);
-
-	switch (sprn) {
-	case SPRN_SDR1:
-		to_book3s(vcpu)->sdr1 = spr_val;
-		break;
-	case SPRN_DSISR:
-		to_book3s(vcpu)->dsisr = spr_val;
-		break;
-	case SPRN_DAR:
-		vcpu->arch.dear = spr_val;
-		break;
-	case SPRN_HIOR:
-		to_book3s(vcpu)->hior = spr_val;
-		break;
-	case SPRN_IBAT0U ... SPRN_IBAT3L:
-	case SPRN_IBAT4U ... SPRN_IBAT7L:
-	case SPRN_DBAT0U ... SPRN_DBAT3L:
-	case SPRN_DBAT4U ... SPRN_DBAT7L:
-		kvmppc_write_bat(vcpu, sprn, (u32)spr_val);
-		/* BAT writes happen so rarely that we're ok to flush
-		 * everything here */
-		kvmppc_mmu_pte_flush(vcpu, 0, 0);
-		break;
-	case SPRN_HID0:
-		to_book3s(vcpu)->hid[0] = spr_val;
-		break;
-	case SPRN_HID1:
-		to_book3s(vcpu)->hid[1] = spr_val;
-		break;
-	case SPRN_HID2:
-		to_book3s(vcpu)->hid[2] = spr_val;
-		break;
-	case SPRN_HID4:
-		to_book3s(vcpu)->hid[4] = spr_val;
-		break;
-	case SPRN_HID5:
-		to_book3s(vcpu)->hid[5] = spr_val;
-		/* guest HID5 set can change is_dcbz32 */
-		if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
-		    (mfmsr() & MSR_HV))
-			vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
-		break;
-	case SPRN_ICTC:
-	case SPRN_THRM1:
-	case SPRN_THRM2:
-	case SPRN_THRM3:
-	case SPRN_CTRLF:
-	case SPRN_CTRLT:
-		break;
-	default:
-		printk(KERN_INFO "KVM: invalid SPR write: %d\n", sprn);
-#ifndef DEBUG_SPR
-		emulated = EMULATE_FAIL;
-#endif
-		break;
-	}
-
-	return emulated;
-}
-
-int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
-{
-	int emulated = EMULATE_DONE;
-
-	switch (sprn) {
-	case SPRN_SDR1:
-		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->sdr1);
-		break;
-	case SPRN_DSISR:
-		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->dsisr);
-		break;
-	case SPRN_DAR:
-		kvmppc_set_gpr(vcpu, rt, vcpu->arch.dear);
-		break;
-	case SPRN_HIOR:
-		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hior);
-		break;
-	case SPRN_HID0:
-		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[0]);
-		break;
-	case SPRN_HID1:
-		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[1]);
-		break;
-	case SPRN_HID2:
-		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[2]);
-		break;
-	case SPRN_HID4:
-		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[4]);
-		break;
-	case SPRN_HID5:
-		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[5]);
-		break;
-	case SPRN_THRM1:
-	case SPRN_THRM2:
-	case SPRN_THRM3:
-	case SPRN_CTRLF:
-	case SPRN_CTRLT:
-		kvmppc_set_gpr(vcpu, rt, 0);
-		break;
-	default:
-		printk(KERN_INFO "KVM: invalid SPR read: %d\n", sprn);
-#ifndef DEBUG_SPR
-		emulated = EMULATE_FAIL;
-#endif
-		break;
-	}
-
-	return emulated;
-}
-
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_exports.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_exports.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_exports.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_exports.c	1969-12-31 19:00:00.000000000 -0500
@@ -1,32 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright SUSE Linux Products GmbH 2009
- *
- * Authors: Alexander Graf <agraf@suse.de>
- */
-
-#include <linux/module.h>
-#include <asm/kvm_book3s.h>
-
-EXPORT_SYMBOL_GPL(kvmppc_trampoline_enter);
-EXPORT_SYMBOL_GPL(kvmppc_trampoline_lowmem);
-EXPORT_SYMBOL_GPL(kvmppc_rmcall);
-EXPORT_SYMBOL_GPL(kvmppc_load_up_fpu);
-#ifdef CONFIG_ALTIVEC
-EXPORT_SYMBOL_GPL(kvmppc_load_up_altivec);
-#endif
-#ifdef CONFIG_VSX
-EXPORT_SYMBOL_GPL(kvmppc_load_up_vsx);
-#endif
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_interrupts.S linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_interrupts.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_interrupts.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_interrupts.S	1969-12-31 19:00:00.000000000 -0500
@@ -1,318 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright SUSE Linux Products GmbH 2009
- *
- * Authors: Alexander Graf <agraf@suse.de>
- */
-
-#include <asm/ppc_asm.h>
-#include <asm/kvm_asm.h>
-#include <asm/reg.h>
-#include <asm/page.h>
-#include <asm/asm-offsets.h>
-#include <asm/exception-64s.h>
-
-#define KVMPPC_HANDLE_EXIT .kvmppc_handle_exit
-#define ULONG_SIZE 8
-#define VCPU_GPR(n)     (VCPU_GPRS + (n * ULONG_SIZE))
-
-.macro DISABLE_INTERRUPTS
-       mfmsr   r0
-       rldicl  r0,r0,48,1
-       rotldi  r0,r0,16
-       mtmsrd  r0,1
-.endm
-
-#define VCPU_LOAD_NVGPRS(vcpu) \
-	ld	r14, VCPU_GPR(r14)(vcpu); \
-	ld	r15, VCPU_GPR(r15)(vcpu); \
-	ld	r16, VCPU_GPR(r16)(vcpu); \
-	ld	r17, VCPU_GPR(r17)(vcpu); \
-	ld	r18, VCPU_GPR(r18)(vcpu); \
-	ld	r19, VCPU_GPR(r19)(vcpu); \
-	ld	r20, VCPU_GPR(r20)(vcpu); \
-	ld	r21, VCPU_GPR(r21)(vcpu); \
-	ld	r22, VCPU_GPR(r22)(vcpu); \
-	ld	r23, VCPU_GPR(r23)(vcpu); \
-	ld	r24, VCPU_GPR(r24)(vcpu); \
-	ld	r25, VCPU_GPR(r25)(vcpu); \
-	ld	r26, VCPU_GPR(r26)(vcpu); \
-	ld	r27, VCPU_GPR(r27)(vcpu); \
-	ld	r28, VCPU_GPR(r28)(vcpu); \
-	ld	r29, VCPU_GPR(r29)(vcpu); \
-	ld	r30, VCPU_GPR(r30)(vcpu); \
-	ld	r31, VCPU_GPR(r31)(vcpu); \
-
-/*****************************************************************************
- *                                                                           *
- *     Guest entry / exit code that is in kernel module memory (highmem)     *
- *                                                                           *
- ****************************************************************************/
-
-/* Registers:
- *  r3: kvm_run pointer
- *  r4: vcpu pointer
- */
-_GLOBAL(__kvmppc_vcpu_entry)
-
-kvm_start_entry:
-	/* Write correct stack frame */
-	mflr    r0
-	std     r0,16(r1)
-
-	/* Save host state to the stack */
-	stdu	r1, -SWITCH_FRAME_SIZE(r1)
-
-	/* Save r3 (kvm_run) and r4 (vcpu) */
-	SAVE_2GPRS(3, r1)
-
-	/* Save non-volatile registers (r14 - r31) */
-	SAVE_NVGPRS(r1)
-
-	/* Save LR */
-	std	r0, _LINK(r1)
-
-	/* Load non-volatile guest state from the vcpu */
-	VCPU_LOAD_NVGPRS(r4)
-
-	/* Save R1/R2 in the PACA */
-	std	r1, PACA_KVM_HOST_R1(r13)
-	std	r2, PACA_KVM_HOST_R2(r13)
-
-	/* XXX swap in/out on load? */
-	ld	r3, VCPU_HIGHMEM_HANDLER(r4)
-	std	r3, PACA_KVM_VMHANDLER(r13)
-
-kvm_start_lightweight:
-
-	ld	r9, VCPU_PC(r4)			/* r9 = vcpu->arch.pc */
-	ld	r10, VCPU_SHADOW_MSR(r4)	/* r10 = vcpu->arch.shadow_msr */
-
-	/* Load some guest state in the respective registers */
-	ld	r5, VCPU_CTR(r4)	/* r5 = vcpu->arch.ctr */
-					/* will be swapped in by rmcall */
-
-	ld	r3, VCPU_LR(r4)		/* r3 = vcpu->arch.lr */
-	mtlr	r3			/* LR = r3 */
-
-	DISABLE_INTERRUPTS
-
-	/* Some guests may need to have dcbz set to 32 byte length.
-	 *
-	 * Usually we ensure that by patching the guest's instructions
-	 * to trap on dcbz and emulate it in the hypervisor.
-	 *
-	 * If we can, we should tell the CPU to use 32 byte dcbz though,
-	 * because that's a lot faster.
-	 */
-
-	ld	r3, VCPU_HFLAGS(r4)
-	rldicl.	r3, r3, 0, 63		/* CR = ((r3 & 1) == 0) */
-	beq	no_dcbz32_on
-
-	mfspr   r3,SPRN_HID5
-	ori     r3, r3, 0x80		/* XXX HID5_dcbz32 = 0x80 */
-	mtspr   SPRN_HID5,r3
-
-no_dcbz32_on:
-
-	ld	r6, VCPU_RMCALL(r4)
-	mtctr	r6
-
-	ld	r3, VCPU_TRAMPOLINE_ENTER(r4)
-	LOAD_REG_IMMEDIATE(r4, MSR_KERNEL & ~(MSR_IR | MSR_DR))
-
-	/* Jump to SLB patching handlder and into our guest */
-	bctr
-
-/*
- * This is the handler in module memory. It gets jumped at from the
- * lowmem trampoline code, so it's basically the guest exit code.
- *
- */
-
-.global kvmppc_handler_highmem
-kvmppc_handler_highmem:
-
-	/*
-	 * Register usage at this point:
-	 *
-	 * R0         = guest last inst
-	 * R1         = host R1
-	 * R2         = host R2
-	 * R3         = guest PC
-	 * R4         = guest MSR
-	 * R5         = guest DAR
-	 * R6         = guest DSISR
-	 * R13        = PACA
-	 * PACA.KVM.* = guest *
-	 *
-	 */
-
-	/* R7 = vcpu */
-	ld	r7, GPR4(r1)
-
-	/* Now save the guest state */
-
-	stw	r0, VCPU_LAST_INST(r7)
-
-	std	r3, VCPU_PC(r7)
-	std	r4, VCPU_SHADOW_SRR1(r7)
-	std	r5, VCPU_FAULT_DEAR(r7)
-	std	r6, VCPU_FAULT_DSISR(r7)
-
-	ld	r5, VCPU_HFLAGS(r7)
-	rldicl.	r5, r5, 0, 63		/* CR = ((r5 & 1) == 0) */
-	beq	no_dcbz32_off
-
-	li	r4, 0
-	mfspr   r5,SPRN_HID5
-	rldimi  r5,r4,6,56
-	mtspr   SPRN_HID5,r5
-
-no_dcbz32_off:
-
-	std	r14, VCPU_GPR(r14)(r7)
-	std	r15, VCPU_GPR(r15)(r7)
-	std	r16, VCPU_GPR(r16)(r7)
-	std	r17, VCPU_GPR(r17)(r7)
-	std	r18, VCPU_GPR(r18)(r7)
-	std	r19, VCPU_GPR(r19)(r7)
-	std	r20, VCPU_GPR(r20)(r7)
-	std	r21, VCPU_GPR(r21)(r7)
-	std	r22, VCPU_GPR(r22)(r7)
-	std	r23, VCPU_GPR(r23)(r7)
-	std	r24, VCPU_GPR(r24)(r7)
-	std	r25, VCPU_GPR(r25)(r7)
-	std	r26, VCPU_GPR(r26)(r7)
-	std	r27, VCPU_GPR(r27)(r7)
-	std	r28, VCPU_GPR(r28)(r7)
-	std	r29, VCPU_GPR(r29)(r7)
-	std	r30, VCPU_GPR(r30)(r7)
-	std	r31, VCPU_GPR(r31)(r7)
-
-	/* Save guest CTR */
-	mfctr	r5
-	std	r5, VCPU_CTR(r7)
-
-	/* Save guest LR */
-	mflr	r5
-	std	r5, VCPU_LR(r7)
-
-	/* Restore host msr -> SRR1 */
-	ld	r6, VCPU_HOST_MSR(r7)
-
-	/*
-	 * For some interrupts, we need to call the real Linux
-	 * handler, so it can do work for us. This has to happen
-	 * as if the interrupt arrived from the kernel though,
-	 * so let's fake it here where most state is restored.
-	 *
-	 * Call Linux for hardware interrupts/decrementer
-	 * r3 = address of interrupt handler (exit reason)
-	 */
-
-	cmpwi	r12, BOOK3S_INTERRUPT_EXTERNAL
-	beq	call_linux_handler
-	cmpwi	r12, BOOK3S_INTERRUPT_DECREMENTER
-	beq	call_linux_handler
-
-	/* Back to EE=1 */
-	mtmsr	r6
-	b	kvm_return_point
-
-call_linux_handler:
-
-	/*
-	 * If we land here we need to jump back to the handler we
-	 * came from.
-	 *
-	 * We have a page that we can access from real mode, so let's
-	 * jump back to that and use it as a trampoline to get back into the
-	 * interrupt handler!
-	 *
-	 * R3 still contains the exit code,
-	 * R5 VCPU_HOST_RETIP and
-	 * R6 VCPU_HOST_MSR
-	 */
-
-	/* Restore host IP -> SRR0 */
-	ld	r5, VCPU_HOST_RETIP(r7)
-
-	/* XXX Better move to a safe function?
-	 *     What if we get an HTAB flush in between mtsrr0 and mtsrr1? */
-
-	mtlr	r12
-
-	ld	r4, VCPU_TRAMPOLINE_LOWMEM(r7)
-	mtsrr0	r4
-	LOAD_REG_IMMEDIATE(r3, MSR_KERNEL & ~(MSR_IR | MSR_DR))
-	mtsrr1	r3
-
-	RFI
-
-.global kvm_return_point
-kvm_return_point:
-
-	/* Jump back to lightweight entry if we're supposed to */
-	/* go back into the guest */
-
-	/* Pass the exit number as 3rd argument to kvmppc_handle_exit */
-	mr	r5, r12
-
-	/* Restore r3 (kvm_run) and r4 (vcpu) */
-	REST_2GPRS(3, r1)
-	bl	KVMPPC_HANDLE_EXIT
-
-	/* If RESUME_GUEST, get back in the loop */
-	cmpwi	r3, RESUME_GUEST
-	beq	kvm_loop_lightweight
-
-	cmpwi	r3, RESUME_GUEST_NV
-	beq	kvm_loop_heavyweight
-
-kvm_exit_loop:
-
-	ld	r4, _LINK(r1)
-	mtlr	r4
-
-	/* Restore non-volatile host registers (r14 - r31) */
-	REST_NVGPRS(r1)
-
-	addi    r1, r1, SWITCH_FRAME_SIZE
-	blr
-
-kvm_loop_heavyweight:
-
-	ld	r4, _LINK(r1)
-	std     r4, (16 + SWITCH_FRAME_SIZE)(r1)
-
-	/* Load vcpu and cpu_run */
-	REST_2GPRS(3, r1)
-
-	/* Load non-volatile guest state from the vcpu */
-	VCPU_LOAD_NVGPRS(r4)
-
-	/* Jump back into the beginning of this function */
-	b	kvm_start_lightweight
-
-kvm_loop_lightweight:
-
-	/* We'll need the vcpu pointer */
-	REST_GPR(4, r1)
-
-	/* Jump back into the beginning of this function */
-	b	kvm_start_lightweight
-
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_mmu.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_mmu.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_mmu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_mmu.c	2010-08-01 18:11:14.000000000 -0400
@@ -232,7 +232,7 @@
 			}
 
 			dprintk("KVM MMU: Translated 0x%lx [0x%llx] -> 0x%llx "
-				"-> 0x%llx\n",
+				"-> 0x%lx\n",
 				eaddr, avpn, gpte->vpage, gpte->raddr);
 			found = true;
 			break;
@@ -383,7 +383,7 @@
 
 	if (vcpu->arch.msr & MSR_IR) {
 		kvmppc_mmu_flush_segments(vcpu);
-		kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc);
+		kvmppc_mmu_map_segment(vcpu, kvmppc_get_pc(vcpu));
 	}
 }
 
@@ -439,37 +439,43 @@
 	kvmppc_mmu_pte_vflush(vcpu, va >> 12, mask);
 }
 
-static int kvmppc_mmu_book3s_64_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
+static int kvmppc_mmu_book3s_64_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid,
 					     u64 *vsid)
 {
+	ulong ea = esid << SID_SHIFT;
+	struct kvmppc_slb *slb;
+	u64 gvsid = esid;
+
+	if (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+		slb = kvmppc_mmu_book3s_64_find_slbe(to_book3s(vcpu), ea);
+		if (slb)
+			gvsid = slb->vsid;
+	}
+
 	switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
 	case 0:
-		*vsid = (VSID_REAL >> 16) | esid;
+		*vsid = VSID_REAL | esid;
 		break;
 	case MSR_IR:
-		*vsid = (VSID_REAL_IR >> 16) | esid;
+		*vsid = VSID_REAL_IR | gvsid;
 		break;
 	case MSR_DR:
-		*vsid = (VSID_REAL_DR >> 16) | esid;
+		*vsid = VSID_REAL_DR | gvsid;
 		break;
 	case MSR_DR|MSR_IR:
-	{
-		ulong ea;
-		struct kvmppc_slb *slb;
-		ea = esid << SID_SHIFT;
-		slb = kvmppc_mmu_book3s_64_find_slbe(to_book3s(vcpu), ea);
-		if (slb)
-			*vsid = slb->vsid;
-		else
+		if (!slb)
 			return -ENOENT;
 
+		*vsid = gvsid;
 		break;
-	}
 	default:
 		BUG();
 		break;
 	}
 
+	if (vcpu->arch.msr & MSR_PR)
+		*vsid |= VSID_PR;
+
 	return 0;
 }
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_mmu_host.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_mmu_host.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_mmu_host.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_mmu_host.c	2010-08-01 18:11:14.000000000 -0400
@@ -48,21 +48,25 @@
 
 static void invalidate_pte(struct hpte_cache *pte)
 {
-	dprintk_mmu("KVM: Flushing SPT %d: 0x%llx (0x%llx) -> 0x%llx\n",
-		    i, pte->pte.eaddr, pte->pte.vpage, pte->host_va);
+	dprintk_mmu("KVM: Flushing SPT: 0x%lx (0x%llx) -> 0x%llx\n",
+		    pte->pte.eaddr, pte->pte.vpage, pte->host_va);
 
 	ppc_md.hpte_invalidate(pte->slot, pte->host_va,
 			       MMU_PAGE_4K, MMU_SEGSIZE_256M,
 			       false);
 	pte->host_va = 0;
-	kvm_release_pfn_dirty(pte->pfn);
+
+	if (pte->pte.may_write)
+		kvm_release_pfn_dirty(pte->pfn);
+	else
+		kvm_release_pfn_clean(pte->pfn);
 }
 
-void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 guest_ea, u64 ea_mask)
+void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, ulong guest_ea, ulong ea_mask)
 {
 	int i;
 
-	dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%llx & 0x%llx\n",
+	dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%lx & 0x%lx\n",
 		    vcpu->arch.hpte_cache_offset, guest_ea, ea_mask);
 	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
 
@@ -106,12 +110,12 @@
 	}
 }
 
-void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, u64 pa_start, u64 pa_end)
+void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, ulong pa_start, ulong pa_end)
 {
 	int i;
 
-	dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%llx & 0x%llx\n",
-		    vcpu->arch.hpte_cache_offset, guest_pa, pa_mask);
+	dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%lx & 0x%lx\n",
+		    vcpu->arch.hpte_cache_offset, pa_start, pa_end);
 	BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
 
 	for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
@@ -182,7 +186,7 @@
 	sid_map_mask = kvmppc_sid_hash(vcpu, gvsid);
 	map = &to_book3s(vcpu)->sid_map[sid_map_mask];
 	if (map->guest_vsid == gvsid) {
-		dprintk_slb("SLB: Searching 0x%llx -> 0x%llx\n",
+		dprintk_slb("SLB: Searching: 0x%llx -> 0x%llx\n",
 			    gvsid, map->host_vsid);
 		return map;
 	}
@@ -194,7 +198,8 @@
 		return map;
 	}
 
-	dprintk_slb("SLB: Searching 0x%llx -> not found\n", gvsid);
+	dprintk_slb("SLB: Searching %d/%d: 0x%llx -> not found\n",
+		    sid_map_mask, SID_MAP_MASK - sid_map_mask, gvsid);
 	return NULL;
 }
 
@@ -212,7 +217,7 @@
 	/* Get host physical address for gpa */
 	hpaddr = gfn_to_pfn(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT);
 	if (kvm_is_error_hva(hpaddr)) {
-		printk(KERN_INFO "Couldn't get guest page for gfn %llx!\n", orig_pte->eaddr);
+		printk(KERN_INFO "Couldn't get guest page for gfn %lx!\n", orig_pte->eaddr);
 		return -EINVAL;
 	}
 	hpaddr <<= PAGE_SHIFT;
@@ -227,10 +232,16 @@
 	vcpu->arch.mmu.esid_to_vsid(vcpu, orig_pte->eaddr >> SID_SHIFT, &vsid);
 	map = find_sid_vsid(vcpu, vsid);
 	if (!map) {
-		kvmppc_mmu_map_segment(vcpu, orig_pte->eaddr);
+		ret = kvmppc_mmu_map_segment(vcpu, orig_pte->eaddr);
+		WARN_ON(ret < 0);
 		map = find_sid_vsid(vcpu, vsid);
 	}
-	BUG_ON(!map);
+	if (!map) {
+		printk(KERN_ERR "KVM: Segment map for 0x%llx (0x%lx) failed\n",
+				vsid, orig_pte->eaddr);
+		WARN_ON(true);
+		return -EINVAL;
+	}
 
 	vsid = map->host_vsid;
 	va = hpt_va(orig_pte->eaddr, vsid, MMU_SEGSIZE_256M);
@@ -257,26 +268,26 @@
 
 	if (ret < 0) {
 		/* If we couldn't map a primary PTE, try a secondary */
-#ifdef USE_SECONDARY
 		hash = ~hash;
+		vflags ^= HPTE_V_SECONDARY;
 		attempt++;
-		if (attempt % 2)
-			vflags = HPTE_V_SECONDARY;
-		else
-			vflags = 0;
-#else
-		attempt = 2;
-#endif
 		goto map_again;
 	} else {
 		int hpte_id = kvmppc_mmu_hpte_cache_next(vcpu);
 		struct hpte_cache *pte = &vcpu->arch.hpte_cache[hpte_id];
 
-		dprintk_mmu("KVM: %c%c Map 0x%llx: [%lx] 0x%lx (0x%llx) -> %lx\n",
+		dprintk_mmu("KVM: %c%c Map 0x%lx: [%lx] 0x%lx (0x%llx) -> %lx\n",
 			    ((rflags & HPTE_R_PP) == 3) ? '-' : 'w',
 			    (rflags & HPTE_R_N) ? '-' : 'x',
 			    orig_pte->eaddr, hpteg, va, orig_pte->vpage, hpaddr);
 
+		/* The ppc_md code may give us a secondary entry even though we
+		   asked for a primary. Fix up. */
+		if ((ret & _PTEIDX_SECONDARY) && !(vflags & HPTE_V_SECONDARY)) {
+			hash = ~hash;
+			hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+		}
+
 		pte->slot = hpteg + (ret & 7);
 		pte->host_va = va;
 		pte->pte = *orig_pte;
@@ -321,6 +332,9 @@
 	map->guest_vsid = gvsid;
 	map->valid = true;
 
+	dprintk_slb("SLB: New mapping at %d: 0x%llx -> 0x%llx\n",
+		    sid_map_mask, gvsid, map->host_vsid);
+
 	return map;
 }
 
@@ -331,14 +345,14 @@
 	int found_inval = -1;
 	int r;
 
-	if (!get_paca()->kvm_slb_max)
-		get_paca()->kvm_slb_max = 1;
+	if (!to_svcpu(vcpu)->slb_max)
+		to_svcpu(vcpu)->slb_max = 1;
 
 	/* Are we overwriting? */
-	for (i = 1; i < get_paca()->kvm_slb_max; i++) {
-		if (!(get_paca()->kvm_slb[i].esid & SLB_ESID_V))
+	for (i = 1; i < to_svcpu(vcpu)->slb_max; i++) {
+		if (!(to_svcpu(vcpu)->slb[i].esid & SLB_ESID_V))
 			found_inval = i;
-		else if ((get_paca()->kvm_slb[i].esid & ESID_MASK) == esid)
+		else if ((to_svcpu(vcpu)->slb[i].esid & ESID_MASK) == esid)
 			return i;
 	}
 
@@ -352,11 +366,11 @@
 		max_slb_size = mmu_slb_size;
 
 	/* Overflowing -> purge */
-	if ((get_paca()->kvm_slb_max) == max_slb_size)
+	if ((to_svcpu(vcpu)->slb_max) == max_slb_size)
 		kvmppc_mmu_flush_segments(vcpu);
 
-	r = get_paca()->kvm_slb_max;
-	get_paca()->kvm_slb_max++;
+	r = to_svcpu(vcpu)->slb_max;
+	to_svcpu(vcpu)->slb_max++;
 
 	return r;
 }
@@ -374,7 +388,7 @@
 
 	if (vcpu->arch.mmu.esid_to_vsid(vcpu, esid, &gvsid)) {
 		/* Invalidate an entry */
-		get_paca()->kvm_slb[slb_index].esid = 0;
+		to_svcpu(vcpu)->slb[slb_index].esid = 0;
 		return -ENOENT;
 	}
 
@@ -388,8 +402,8 @@
 	slb_vsid &= ~SLB_VSID_KP;
 	slb_esid |= slb_index;
 
-	get_paca()->kvm_slb[slb_index].esid = slb_esid;
-	get_paca()->kvm_slb[slb_index].vsid = slb_vsid;
+	to_svcpu(vcpu)->slb[slb_index].esid = slb_esid;
+	to_svcpu(vcpu)->slb[slb_index].vsid = slb_vsid;
 
 	dprintk_slb("slbmte %#llx, %#llx\n", slb_vsid, slb_esid);
 
@@ -398,11 +412,29 @@
 
 void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu)
 {
-	get_paca()->kvm_slb_max = 1;
-	get_paca()->kvm_slb[0].esid = 0;
+	to_svcpu(vcpu)->slb_max = 1;
+	to_svcpu(vcpu)->slb[0].esid = 0;
 }
 
 void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
 {
 	kvmppc_mmu_pte_flush(vcpu, 0, 0);
+	__destroy_context(to_book3s(vcpu)->context_id);
+}
+
+int kvmppc_mmu_init(struct kvm_vcpu *vcpu)
+{
+	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
+	int err;
+
+	err = __init_new_context();
+	if (err < 0)
+		return -1;
+	vcpu3s->context_id = err;
+
+	vcpu3s->vsid_max = ((vcpu3s->context_id + 1) << USER_ESID_BITS) - 1;
+	vcpu3s->vsid_first = vcpu3s->context_id << USER_ESID_BITS;
+	vcpu3s->vsid_next = vcpu3s->vsid_first;
+
+	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_rmhandlers.S linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_rmhandlers.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_rmhandlers.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_rmhandlers.S	1969-12-31 19:00:00.000000000 -0500
@@ -1,204 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- *
- * Copyright SUSE Linux Products GmbH 2009
- *
- * Authors: Alexander Graf <agraf@suse.de>
- */
-
-#include <asm/ppc_asm.h>
-#include <asm/kvm_asm.h>
-#include <asm/reg.h>
-#include <asm/page.h>
-#include <asm/asm-offsets.h>
-#include <asm/exception-64s.h>
-
-/*****************************************************************************
- *                                                                           *
- *        Real Mode handlers that need to be in low physical memory          *
- *                                                                           *
- ****************************************************************************/
-
-
-.macro INTERRUPT_TRAMPOLINE intno
-
-.global kvmppc_trampoline_\intno
-kvmppc_trampoline_\intno:
-
-	mtspr	SPRN_SPRG_SCRATCH0, r13		/* Save r13 */
-
-	/*
-	 * First thing to do is to find out if we're coming
-	 * from a KVM guest or a Linux process.
-	 *
-	 * To distinguish, we check a magic byte in the PACA
-	 */
-	mfspr	r13, SPRN_SPRG_PACA		/* r13 = PACA */
-	std	r12, PACA_KVM_SCRATCH0(r13)
-	mfcr	r12
-	stw	r12, PACA_KVM_SCRATCH1(r13)
-	lbz	r12, PACA_KVM_IN_GUEST(r13)
-	cmpwi	r12, KVM_GUEST_MODE_NONE
-	bne	..kvmppc_handler_hasmagic_\intno
-	/* No KVM guest? Then jump back to the Linux handler! */
-	lwz	r12, PACA_KVM_SCRATCH1(r13)
-	mtcr	r12
-	ld	r12, PACA_KVM_SCRATCH0(r13)
-	mfspr	r13, SPRN_SPRG_SCRATCH0		/* r13 = original r13 */
-	b	kvmppc_resume_\intno		/* Get back original handler */
-
-	/* Now we know we're handling a KVM guest */
-..kvmppc_handler_hasmagic_\intno:
-
-	/* Should we just skip the faulting instruction? */
-	cmpwi	r12, KVM_GUEST_MODE_SKIP
-	beq	kvmppc_handler_skip_ins
-
-	/* Let's store which interrupt we're handling */
-	li	r12, \intno
-
-	/* Jump into the SLB exit code that goes to the highmem handler */
-	b	kvmppc_handler_trampoline_exit
-
-.endm
-
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_SYSTEM_RESET
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_MACHINE_CHECK
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DATA_STORAGE
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DATA_SEGMENT
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_INST_STORAGE
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_INST_SEGMENT
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_EXTERNAL
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_ALIGNMENT
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_PROGRAM
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_FP_UNAVAIL
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DECREMENTER
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_SYSCALL
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_TRACE
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_PERFMON
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_ALTIVEC
-INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_VSX
-
-/*
- * Bring us back to the faulting code, but skip the
- * faulting instruction.
- *
- * This is a generic exit path from the interrupt
- * trampolines above.
- *
- * Input Registers:
- *
- * R12               = free
- * R13               = PACA
- * PACA.KVM.SCRATCH0 = guest R12
- * PACA.KVM.SCRATCH1 = guest CR
- * SPRG_SCRATCH0     = guest R13
- *
- */
-kvmppc_handler_skip_ins:
-
-	/* Patch the IP to the next instruction */
-	mfsrr0	r12
-	addi	r12, r12, 4
-	mtsrr0	r12
-
-	/* Clean up all state */
-	lwz	r12, PACA_KVM_SCRATCH1(r13)
-	mtcr	r12
-	ld	r12, PACA_KVM_SCRATCH0(r13)
-	mfspr	r13, SPRN_SPRG_SCRATCH0
-
-	/* And get back into the code */
-	RFI
-
-/*
- * This trampoline brings us back to a real mode handler
- *
- * Input Registers:
- *
- * R5 = SRR0
- * R6 = SRR1
- * LR = real-mode IP
- *
- */
-.global kvmppc_handler_lowmem_trampoline
-kvmppc_handler_lowmem_trampoline:
-
-	mtsrr0	r5
-	mtsrr1	r6
-	blr
-kvmppc_handler_lowmem_trampoline_end:
-
-/*
- * Call a function in real mode
- *
- * Input Registers:
- *
- * R3 = function
- * R4 = MSR
- * R5 = CTR
- *
- */
-_GLOBAL(kvmppc_rmcall)
-	mtmsr	r4		/* Disable relocation, so mtsrr
-				   doesn't get interrupted */
-	mtctr	r5
-	mtsrr0	r3
-	mtsrr1	r4
-	RFI
-
-/*
- * Activate current's external feature (FPU/Altivec/VSX)
- */
-#define define_load_up(what) 				\
-							\
-_GLOBAL(kvmppc_load_up_ ## what);			\
-	subi	r1, r1, INT_FRAME_SIZE;			\
-	mflr	r3;					\
-	std	r3, _LINK(r1);				\
-	mfmsr	r4;					\
-	std	r31, GPR3(r1);				\
-	mr	r31, r4;				\
-	li	r5, MSR_DR;				\
-	oris	r5, r5, MSR_EE@h;			\
-	andc	r4, r4, r5;				\
-	mtmsr	r4;					\
-							\
-	bl	.load_up_ ## what;			\
-							\
-	mtmsr	r31;					\
-	ld	r3, _LINK(r1);				\
-	ld	r31, GPR3(r1);				\
-	addi	r1, r1, INT_FRAME_SIZE;			\
-	mtlr	r3;					\
-	blr
-
-define_load_up(fpu)
-#ifdef CONFIG_ALTIVEC
-define_load_up(altivec)
-#endif
-#ifdef CONFIG_VSX
-define_load_up(vsx)
-#endif
-
-.global kvmppc_trampoline_lowmem
-kvmppc_trampoline_lowmem:
-	.long kvmppc_handler_lowmem_trampoline - _stext
-
-.global kvmppc_trampoline_enter
-kvmppc_trampoline_enter:
-	.long kvmppc_handler_trampoline_enter - _stext
-
-#include "book3s_64_slb.S"
-
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_slb.S linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_slb.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_64_slb.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_64_slb.S	2010-08-01 18:11:14.000000000 -0400
@@ -44,8 +44,7 @@
  *                                                                            *
  *****************************************************************************/
 
-.global kvmppc_handler_trampoline_enter
-kvmppc_handler_trampoline_enter:
+.macro LOAD_GUEST_SEGMENTS
 
 	/* Required state:
 	 *
@@ -53,20 +52,14 @@
 	 * R13 = PACA
 	 * R1 = host R1
 	 * R2 = host R2
-	 * R9 = guest IP
-	 * R10 = guest MSR
-	 * all other GPRS = free
-	 * PACA[KVM_CR] = guest CR
-	 * PACA[KVM_XER] = guest XER
+	 * R3 = shadow vcpu
+	 * all other volatile GPRS = free
+	 * SVCPU[CR]  = guest CR
+	 * SVCPU[XER] = guest XER
+	 * SVCPU[CTR] = guest CTR
+	 * SVCPU[LR]  = guest LR
 	 */
 
-	mtsrr0	r9
-	mtsrr1	r10
-
-	/* Activate guest mode, so faults get handled by KVM */
-	li	r11, KVM_GUEST_MODE_GUEST
-	stb	r11, PACA_KVM_IN_GUEST(r13)
-
 	/* Remove LPAR shadow entries */
 
 #if SLB_NUM_BOLTED == 3
@@ -101,14 +94,14 @@
 
 	/* Fill SLB with our shadow */
 
-	lbz	r12, PACA_KVM_SLB_MAX(r13)
+	lbz	r12, SVCPU_SLB_MAX(r3)
 	mulli	r12, r12, 16
-	addi	r12, r12, PACA_KVM_SLB
-	add	r12, r12, r13
+	addi	r12, r12, SVCPU_SLB
+	add	r12, r12, r3
 
 	/* for (r11 = kvm_slb; r11 < kvm_slb + kvm_slb_size; r11+=slb_entry) */
-	li	r11, PACA_KVM_SLB
-	add	r11, r11, r13
+	li	r11, SVCPU_SLB
+	add	r11, r11, r3
 
 slb_loop_enter:
 
@@ -127,34 +120,7 @@
 
 slb_do_enter:
 
-	/* Enter guest */
-
-	ld	r0, (PACA_KVM_R0)(r13)
-	ld	r1, (PACA_KVM_R1)(r13)
-	ld	r2, (PACA_KVM_R2)(r13)
-	ld	r3, (PACA_KVM_R3)(r13)
-	ld	r4, (PACA_KVM_R4)(r13)
-	ld	r5, (PACA_KVM_R5)(r13)
-	ld	r6, (PACA_KVM_R6)(r13)
-	ld	r7, (PACA_KVM_R7)(r13)
-	ld	r8, (PACA_KVM_R8)(r13)
-	ld	r9, (PACA_KVM_R9)(r13)
-	ld	r10, (PACA_KVM_R10)(r13)
-	ld	r12, (PACA_KVM_R12)(r13)
-
-	lwz	r11, (PACA_KVM_CR)(r13)
-	mtcr	r11
-
-	ld	r11, (PACA_KVM_XER)(r13)
-	mtxer	r11
-
-	ld	r11, (PACA_KVM_R11)(r13)
-	ld	r13, (PACA_KVM_R13)(r13)
-
-	RFI
-kvmppc_handler_trampoline_enter_end:
-
-
+.endm
 
 /******************************************************************************
  *                                                                            *
@@ -162,99 +128,22 @@
  *                                                                            *
  *****************************************************************************/
 
-.global kvmppc_handler_trampoline_exit
-kvmppc_handler_trampoline_exit:
+.macro LOAD_HOST_SEGMENTS
 
 	/* Register usage at this point:
 	 *
-	 * SPRG_SCRATCH0     = guest R13
-	 * R12               = exit handler id
-	 * R13               = PACA
-	 * PACA.KVM.SCRATCH0 = guest R12
-	 * PACA.KVM.SCRATCH1 = guest CR
+	 * R1         = host R1
+	 * R2         = host R2
+	 * R12        = exit handler id
+	 * R13        = shadow vcpu - SHADOW_VCPU_OFF [=PACA on PPC64]
+	 * SVCPU.*    = guest *
+	 * SVCPU[CR]  = guest CR
+	 * SVCPU[XER] = guest XER
+	 * SVCPU[CTR] = guest CTR
+	 * SVCPU[LR]  = guest LR
 	 *
 	 */
 
-	/* Save registers */
-
-	std	r0, PACA_KVM_R0(r13)
-	std	r1, PACA_KVM_R1(r13)
-	std	r2, PACA_KVM_R2(r13)
-	std	r3, PACA_KVM_R3(r13)
-	std	r4, PACA_KVM_R4(r13)
-	std	r5, PACA_KVM_R5(r13)
-	std	r6, PACA_KVM_R6(r13)
-	std	r7, PACA_KVM_R7(r13)
-	std	r8, PACA_KVM_R8(r13)
-	std	r9, PACA_KVM_R9(r13)
-	std	r10, PACA_KVM_R10(r13)
-	std	r11, PACA_KVM_R11(r13)
-
-	/* Restore R1/R2 so we can handle faults */
-	ld	r1, PACA_KVM_HOST_R1(r13)
-	ld	r2, PACA_KVM_HOST_R2(r13)
-
-	/* Save guest PC and MSR in GPRs */
-	mfsrr0	r3
-	mfsrr1	r4
-
-	/* Get scratch'ed off registers */
-	mfspr	r9, SPRN_SPRG_SCRATCH0
-	std	r9, PACA_KVM_R13(r13)
-
-	ld	r8, PACA_KVM_SCRATCH0(r13)
-	std	r8, PACA_KVM_R12(r13)
-
-	lwz	r7, PACA_KVM_SCRATCH1(r13)
-	stw	r7, PACA_KVM_CR(r13)
-
-	/* Save more register state  */
-
-	mfxer	r6
-	stw	r6, PACA_KVM_XER(r13)
-
-	mfdar	r5
-	mfdsisr	r6
-
-	/*
-	 * In order for us to easily get the last instruction,
-	 * we got the #vmexit at, we exploit the fact that the
-	 * virtual layout is still the same here, so we can just
-	 * ld from the guest's PC address
-	 */
-
-	/* We only load the last instruction when it's safe */
-	cmpwi	r12, BOOK3S_INTERRUPT_DATA_STORAGE
-	beq	ld_last_inst
-	cmpwi	r12, BOOK3S_INTERRUPT_PROGRAM
-	beq	ld_last_inst
-
-	b	no_ld_last_inst
-
-ld_last_inst:
-	/* Save off the guest instruction we're at */
-
-	/* Set guest mode to 'jump over instruction' so if lwz faults
-	 * we'll just continue at the next IP. */
-	li	r9, KVM_GUEST_MODE_SKIP
-	stb	r9, PACA_KVM_IN_GUEST(r13)
-
-	/*    1) enable paging for data */
-	mfmsr	r9
-	ori	r11, r9, MSR_DR			/* Enable paging for data */
-	mtmsr	r11
-	/*    2) fetch the instruction */
-	li	r0, KVM_INST_FETCH_FAILED	/* In case lwz faults */
-	lwz	r0, 0(r3)
-	/*    3) disable paging again */
-	mtmsr	r9
-
-no_ld_last_inst:
-
-	/* Unset guest mode */
-	li	r9, KVM_GUEST_MODE_NONE
-	stb	r9, PACA_KVM_IN_GUEST(r13)
-
 	/* Restore bolted entries from the shadow and fix it along the way */
 
 	/* We don't store anything in entry 0, so we don't need to take care of it */
@@ -275,28 +164,4 @@
 
 slb_do_exit:
 
-	/* Register usage at this point:
-	 *
-	 * R0         = guest last inst
-	 * R1         = host R1
-	 * R2         = host R2
-	 * R3         = guest PC
-	 * R4         = guest MSR
-	 * R5         = guest DAR
-	 * R6         = guest DSISR
-	 * R12        = exit handler id
-	 * R13        = PACA
-	 * PACA.KVM.* = guest *
-	 *
-	 */
-
-	/* RFI into the highmem handler */
-	mfmsr	r7
-	ori	r7, r7, MSR_IR|MSR_DR|MSR_RI	/* Enable paging */
-	mtsrr1	r7
-	ld	r8, PACA_KVM_VMHANDLER(r13)	/* Highmem handler address */
-	mtsrr0	r8
-
-	RFI
-kvmppc_handler_trampoline_exit_end:
-
+.endm
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s.c	2010-08-01 18:11:14.000000000 -0400
@@ -16,6 +16,7 @@
 
 #include <linux/kvm_host.h>
 #include <linux/err.h>
+#include <linux/slab.h>
 
 #include <asm/reg.h>
 #include <asm/cputable.h>
@@ -29,6 +30,7 @@
 #include <linux/gfp.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>
+#include <linux/highmem.h>
 
 #define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
 
@@ -36,7 +38,15 @@
 /* #define EXIT_DEBUG_SIMPLE */
 /* #define DEBUG_EXT */
 
-static void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr);
+static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
+			     ulong msr);
+
+/* Some compatibility defines */
+#ifdef CONFIG_PPC_BOOK3S_32
+#define MSR_USER32 MSR_USER
+#define MSR_USER64 MSR_USER
+#define HW_PAGE_SIZE PAGE_SIZE
+#endif
 
 struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "exits",       VCPU_STAT(sum_exits) },
@@ -69,18 +79,26 @@
 
 void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
-	memcpy(get_paca()->kvm_slb, to_book3s(vcpu)->slb_shadow, sizeof(get_paca()->kvm_slb));
-	memcpy(&get_paca()->shadow_vcpu, &to_book3s(vcpu)->shadow_vcpu,
+#ifdef CONFIG_PPC_BOOK3S_64
+	memcpy(to_svcpu(vcpu)->slb, to_book3s(vcpu)->slb_shadow, sizeof(to_svcpu(vcpu)->slb));
+	memcpy(&get_paca()->shadow_vcpu, to_book3s(vcpu)->shadow_vcpu,
 	       sizeof(get_paca()->shadow_vcpu));
-	get_paca()->kvm_slb_max = to_book3s(vcpu)->slb_shadow_max;
+	to_svcpu(vcpu)->slb_max = to_book3s(vcpu)->slb_shadow_max;
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S_32
+	current->thread.kvm_shadow_vcpu = to_book3s(vcpu)->shadow_vcpu;
+#endif
 }
 
 void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu)
 {
-	memcpy(to_book3s(vcpu)->slb_shadow, get_paca()->kvm_slb, sizeof(get_paca()->kvm_slb));
-	memcpy(&to_book3s(vcpu)->shadow_vcpu, &get_paca()->shadow_vcpu,
+#ifdef CONFIG_PPC_BOOK3S_64
+	memcpy(to_book3s(vcpu)->slb_shadow, to_svcpu(vcpu)->slb, sizeof(to_svcpu(vcpu)->slb));
+	memcpy(to_book3s(vcpu)->shadow_vcpu, &get_paca()->shadow_vcpu,
 	       sizeof(get_paca()->shadow_vcpu));
-	to_book3s(vcpu)->slb_shadow_max = get_paca()->kvm_slb_max;
+	to_book3s(vcpu)->slb_shadow_max = to_svcpu(vcpu)->slb_max;
+#endif
 
 	kvmppc_giveup_ext(vcpu, MSR_FP);
 	kvmppc_giveup_ext(vcpu, MSR_VEC);
@@ -131,18 +149,22 @@
 		}
 	}
 
-	if (((vcpu->arch.msr & (MSR_IR|MSR_DR)) != (old_msr & (MSR_IR|MSR_DR))) ||
-	    (vcpu->arch.msr & MSR_PR) != (old_msr & MSR_PR)) {
+	if ((vcpu->arch.msr & (MSR_PR|MSR_IR|MSR_DR)) !=
+		   (old_msr & (MSR_PR|MSR_IR|MSR_DR))) {
 		kvmppc_mmu_flush_segments(vcpu);
-		kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc);
+		kvmppc_mmu_map_segment(vcpu, kvmppc_get_pc(vcpu));
 	}
+
+	/* Preload FPU if it's enabled */
+	if (vcpu->arch.msr & MSR_FP)
+		kvmppc_handle_ext(vcpu, BOOK3S_INTERRUPT_FP_UNAVAIL, MSR_FP);
 }
 
 void kvmppc_inject_interrupt(struct kvm_vcpu *vcpu, int vec, u64 flags)
 {
-	vcpu->arch.srr0 = vcpu->arch.pc;
+	vcpu->arch.srr0 = kvmppc_get_pc(vcpu);
 	vcpu->arch.srr1 = vcpu->arch.msr | flags;
-	vcpu->arch.pc = to_book3s(vcpu)->hior + vec;
+	kvmppc_set_pc(vcpu, to_book3s(vcpu)->hior + vec);
 	vcpu->arch.mmu.reset_msr(vcpu);
 }
 
@@ -218,6 +240,12 @@
 	kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_EXTERNAL);
 }
 
+void kvmppc_core_dequeue_external(struct kvm_vcpu *vcpu,
+                                  struct kvm_interrupt *irq)
+{
+	kvmppc_book3s_dequeue_irqprio(vcpu, BOOK3S_INTERRUPT_EXTERNAL);
+}
+
 int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu, unsigned int priority)
 {
 	int deliver = 1;
@@ -302,7 +330,7 @@
 		printk(KERN_EMERG "KVM: Check pending: %lx\n", vcpu->arch.pending_exceptions);
 #endif
 	priority = __ffs(*pending);
-	while (priority <= (sizeof(unsigned int) * 8)) {
+	while (priority < BOOK3S_IRQPRIO_MAX) {
 		if (kvmppc_book3s_irqprio_deliver(vcpu, priority) &&
 		    (priority != BOOK3S_IRQPRIO_DECREMENTER)) {
 			/* DEC interrupts get cleared by mtdec */
@@ -318,13 +346,18 @@
 
 void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
 {
+	u32 host_pvr;
+
 	vcpu->arch.hflags &= ~BOOK3S_HFLAG_SLB;
 	vcpu->arch.pvr = pvr;
+#ifdef CONFIG_PPC_BOOK3S_64
 	if ((pvr >= 0x330000) && (pvr < 0x70330000)) {
 		kvmppc_mmu_book3s_64_init(vcpu);
 		to_book3s(vcpu)->hior = 0xfff00000;
 		to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL;
-	} else {
+	} else
+#endif
+	{
 		kvmppc_mmu_book3s_32_init(vcpu);
 		to_book3s(vcpu)->hior = 0;
 		to_book3s(vcpu)->msr_mask = 0xffffffffULL;
@@ -337,6 +370,32 @@
 	    !strcmp(cur_cpu_spec->platform, "ppc970"))
 		vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
 
+	/* Cell performs badly if MSR_FEx are set. So let's hope nobody
+	   really needs them in a VM on Cell and force disable them. */
+	if (!strcmp(cur_cpu_spec->platform, "ppc-cell-be"))
+		to_book3s(vcpu)->msr_mask &= ~(MSR_FE0 | MSR_FE1);
+
+#ifdef CONFIG_PPC_BOOK3S_32
+	/* 32 bit Book3S always has 32 byte dcbz */
+	vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
+#endif
+
+	/* On some CPUs we can execute paired single operations natively */
+	asm ( "mfpvr %0" : "=r"(host_pvr));
+	switch (host_pvr) {
+	case 0x00080200:	/* lonestar 2.0 */
+	case 0x00088202:	/* lonestar 2.2 */
+	case 0x70000100:	/* gekko 1.0 */
+	case 0x00080100:	/* gekko 2.0 */
+	case 0x00083203:	/* gekko 2.3a */
+	case 0x00083213:	/* gekko 2.3b */
+	case 0x00083204:	/* gekko 2.4 */
+	case 0x00083214:	/* gekko 2.4e (8SE) - retail HW2 */
+	case 0x00087200:	/* broadway */
+		vcpu->arch.hflags |= BOOK3S_HFLAG_NATIVE_PS;
+		/* Enable HID2.PSE - in case we need it later */
+		mtspr(SPRN_HID2_GEKKO, mfspr(SPRN_HID2_GEKKO) | (1 << 29));
+	}
 }
 
 /* Book3s_32 CPUs always have 32 bytes cache line size, which Linux assumes. To
@@ -350,34 +409,29 @@
  */
 static void kvmppc_patch_dcbz(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte)
 {
-	bool touched = false;
-	hva_t hpage;
+	struct page *hpage;
+	u64 hpage_offset;
 	u32 *page;
 	int i;
 
-	hpage = gfn_to_hva(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
-	if (kvm_is_error_hva(hpage))
+	hpage = gfn_to_page(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
+	if (is_error_page(hpage))
 		return;
 
-	hpage |= pte->raddr & ~PAGE_MASK;
-	hpage &= ~0xFFFULL;
-
-	page = vmalloc(HW_PAGE_SIZE);
-
-	if (copy_from_user(page, (void __user *)hpage, HW_PAGE_SIZE))
-		goto out;
+	hpage_offset = pte->raddr & ~PAGE_MASK;
+	hpage_offset &= ~0xFFFULL;
+	hpage_offset /= 4;
 
-	for (i=0; i < HW_PAGE_SIZE / 4; i++)
-		if ((page[i] & 0xff0007ff) == INS_DCBZ) {
-			page[i] &= 0xfffffff7; // reserved instruction, so we trap
-			touched = true;
-		}
+	get_page(hpage);
+	page = kmap_atomic(hpage, KM_USER0);
 
-	if (touched)
-		copy_to_user((void __user *)hpage, page, HW_PAGE_SIZE);
+	/* patch dcbz into reserved instruction, so we trap */
+	for (i=hpage_offset; i < hpage_offset + (HW_PAGE_SIZE / 4); i++)
+		if ((page[i] & 0xff0007ff) == INS_DCBZ)
+			page[i] &= 0xfffffff7;
 
-out:
-	vfree(page);
+	kunmap_atomic(page, KM_USER0);
+	put_page(hpage);
 }
 
 static int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, bool data,
@@ -391,15 +445,7 @@
 	} else {
 		pte->eaddr = eaddr;
 		pte->raddr = eaddr & 0xffffffff;
-		pte->vpage = eaddr >> 12;
-		switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
-		case 0:
-			pte->vpage |= VSID_REAL;
-		case MSR_DR:
-			pte->vpage |= VSID_REAL_DR;
-		case MSR_IR:
-			pte->vpage |= VSID_REAL_IR;
-		}
+		pte->vpage = VSID_REAL | eaddr >> 12;
 		pte->may_read = true;
 		pte->may_write = true;
 		pte->may_execute = true;
@@ -434,55 +480,55 @@
 	return kvmppc_bad_hva();
 }
 
-int kvmppc_st(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr)
+int kvmppc_st(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr,
+	      bool data)
 {
 	struct kvmppc_pte pte;
-	hva_t hva = eaddr;
 
 	vcpu->stat.st++;
 
-	if (kvmppc_xlate(vcpu, eaddr, false, &pte))
-		goto err;
+	if (kvmppc_xlate(vcpu, *eaddr, data, &pte))
+		return -ENOENT;
 
-	hva = kvmppc_pte_to_hva(vcpu, &pte, false);
-	if (kvm_is_error_hva(hva))
-		goto err;
+	*eaddr = pte.raddr;
 
-	if (copy_to_user((void __user *)hva, ptr, size)) {
-		printk(KERN_INFO "kvmppc_st at 0x%lx failed\n", hva);
-		goto err;
-	}
+	if (!pte.may_write)
+		return -EPERM;
 
-	return 0;
+	if (kvm_write_guest(vcpu->kvm, pte.raddr, ptr, size))
+		return EMULATE_DO_MMIO;
 
-err:
-	return -ENOENT;
+	return EMULATE_DONE;
 }
 
-int kvmppc_ld(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr,
+int kvmppc_ld(struct kvm_vcpu *vcpu, ulong *eaddr, int size, void *ptr,
 		      bool data)
 {
 	struct kvmppc_pte pte;
-	hva_t hva = eaddr;
+	hva_t hva = *eaddr;
 
 	vcpu->stat.ld++;
 
-	if (kvmppc_xlate(vcpu, eaddr, data, &pte))
-		goto err;
+	if (kvmppc_xlate(vcpu, *eaddr, data, &pte))
+		goto nopte;
+
+	*eaddr = pte.raddr;
 
 	hva = kvmppc_pte_to_hva(vcpu, &pte, true);
 	if (kvm_is_error_hva(hva))
-		goto err;
+		goto mmio;
 
 	if (copy_from_user(ptr, (void __user *)hva, size)) {
 		printk(KERN_INFO "kvmppc_ld at 0x%lx failed\n", hva);
-		goto err;
+		goto mmio;
 	}
 
-	return 0;
+	return EMULATE_DONE;
 
-err:
+nopte:
 	return -ENOENT;
+mmio:
+	return EMULATE_DO_MMIO;
 }
 
 static int kvmppc_visible_gfn(struct kvm_vcpu *vcpu, gfn_t gfn)
@@ -499,12 +545,11 @@
 	int page_found = 0;
 	struct kvmppc_pte pte;
 	bool is_mmio = false;
+	bool dr = (vcpu->arch.msr & MSR_DR) ? true : false;
+	bool ir = (vcpu->arch.msr & MSR_IR) ? true : false;
+	u64 vsid;
 
-	if ( vec == BOOK3S_INTERRUPT_DATA_STORAGE ) {
-		relocated = (vcpu->arch.msr & MSR_DR);
-	} else {
-		relocated = (vcpu->arch.msr & MSR_IR);
-	}
+	relocated = data ? dr : ir;
 
 	/* Resolve real address if translation turned on */
 	if (relocated) {
@@ -516,14 +561,25 @@
 		pte.raddr = eaddr & 0xffffffff;
 		pte.eaddr = eaddr;
 		pte.vpage = eaddr >> 12;
-		switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
-		case 0:
-			pte.vpage |= VSID_REAL;
-		case MSR_DR:
-			pte.vpage |= VSID_REAL_DR;
-		case MSR_IR:
-			pte.vpage |= VSID_REAL_IR;
-		}
+	}
+
+	switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+	case 0:
+		pte.vpage |= ((u64)VSID_REAL << (SID_SHIFT - 12));
+		break;
+	case MSR_DR:
+	case MSR_IR:
+		vcpu->arch.mmu.esid_to_vsid(vcpu, eaddr >> SID_SHIFT, &vsid);
+
+		if ((vcpu->arch.msr & (MSR_DR|MSR_IR)) == MSR_DR)
+			pte.vpage |= ((u64)VSID_REAL_DR << (SID_SHIFT - 12));
+		else
+			pte.vpage |= ((u64)VSID_REAL_IR << (SID_SHIFT - 12));
+		pte.vpage |= vsid;
+
+		if (vsid == -1)
+			page_found = -EINVAL;
+		break;
 	}
 
 	if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
@@ -538,20 +594,20 @@
 
 	if (page_found == -ENOENT) {
 		/* Page not found in guest PTE entries */
-		vcpu->arch.dear = vcpu->arch.fault_dear;
-		to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr;
-		vcpu->arch.msr |= (vcpu->arch.shadow_srr1 & 0x00000000f8000000ULL);
+		vcpu->arch.dear = kvmppc_get_fault_dar(vcpu);
+		to_book3s(vcpu)->dsisr = to_svcpu(vcpu)->fault_dsisr;
+		vcpu->arch.msr |= (to_svcpu(vcpu)->shadow_srr1 & 0x00000000f8000000ULL);
 		kvmppc_book3s_queue_irqprio(vcpu, vec);
 	} else if (page_found == -EPERM) {
 		/* Storage protection */
-		vcpu->arch.dear = vcpu->arch.fault_dear;
-		to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr & ~DSISR_NOHPTE;
+		vcpu->arch.dear = kvmppc_get_fault_dar(vcpu);
+		to_book3s(vcpu)->dsisr = to_svcpu(vcpu)->fault_dsisr & ~DSISR_NOHPTE;
 		to_book3s(vcpu)->dsisr |= DSISR_PROTFAULT;
-		vcpu->arch.msr |= (vcpu->arch.shadow_srr1 & 0x00000000f8000000ULL);
+		vcpu->arch.msr |= (to_svcpu(vcpu)->shadow_srr1 & 0x00000000f8000000ULL);
 		kvmppc_book3s_queue_irqprio(vcpu, vec);
 	} else if (page_found == -EINVAL) {
 		/* Page not found in guest SLB */
-		vcpu->arch.dear = vcpu->arch.fault_dear;
+		vcpu->arch.dear = kvmppc_get_fault_dar(vcpu);
 		kvmppc_book3s_queue_irqprio(vcpu, vec + 0x80);
 	} else if (!is_mmio &&
 		   kvmppc_visible_gfn(vcpu, pte.raddr >> PAGE_SHIFT)) {
@@ -583,11 +639,13 @@
 }
 
 /* Give up external provider (FPU, Altivec, VSX) */
-static void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr)
+void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr)
 {
 	struct thread_struct *t = &current->thread;
 	u64 *vcpu_fpr = vcpu->arch.fpr;
+#ifdef CONFIG_VSX
 	u64 *vcpu_vsx = vcpu->arch.vsr;
+#endif
 	u64 *thread_fpr = (u64*)t->fpr;
 	int i;
 
@@ -629,21 +687,65 @@
 	kvmppc_recalc_shadow_msr(vcpu);
 }
 
+static int kvmppc_read_inst(struct kvm_vcpu *vcpu)
+{
+	ulong srr0 = kvmppc_get_pc(vcpu);
+	u32 last_inst = kvmppc_get_last_inst(vcpu);
+	int ret;
+
+	ret = kvmppc_ld(vcpu, &srr0, sizeof(u32), &last_inst, false);
+	if (ret == -ENOENT) {
+		vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 33, 33, 1);
+		vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 34, 36, 0);
+		vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 42, 47, 0);
+		kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_INST_STORAGE);
+		return EMULATE_AGAIN;
+	}
+
+	return EMULATE_DONE;
+}
+
+static int kvmppc_check_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr)
+{
+
+	/* Need to do paired single emulation? */
+	if (!(vcpu->arch.hflags & BOOK3S_HFLAG_PAIRED_SINGLE))
+		return EMULATE_DONE;
+
+	/* Read out the instruction */
+	if (kvmppc_read_inst(vcpu) == EMULATE_DONE)
+		/* Need to emulate */
+		return EMULATE_FAIL;
+
+	return EMULATE_AGAIN;
+}
+
 /* Handle external providers (FPU, Altivec, VSX) */
 static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
 			     ulong msr)
 {
 	struct thread_struct *t = &current->thread;
 	u64 *vcpu_fpr = vcpu->arch.fpr;
+#ifdef CONFIG_VSX
 	u64 *vcpu_vsx = vcpu->arch.vsr;
+#endif
 	u64 *thread_fpr = (u64*)t->fpr;
 	int i;
 
+	/* When we have paired singles, we emulate in software */
+	if (vcpu->arch.hflags & BOOK3S_HFLAG_PAIRED_SINGLE)
+		return RESUME_GUEST;
+
 	if (!(vcpu->arch.msr & msr)) {
 		kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
 		return RESUME_GUEST;
 	}
 
+	/* We already own the ext */
+	if (vcpu->arch.guest_owned_ext & msr) {
+		return RESUME_GUEST;
+	}
+
 #ifdef DEBUG_EXT
 	printk(KERN_INFO "Loading up ext 0x%lx\n", msr);
 #endif
@@ -696,21 +798,33 @@
 	run->ready_for_interrupt_injection = 1;
 #ifdef EXIT_DEBUG
 	printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | dar=0x%lx | dec=0x%x | msr=0x%lx\n",
-		exit_nr, vcpu->arch.pc, vcpu->arch.fault_dear,
-		kvmppc_get_dec(vcpu), vcpu->arch.msr);
+		exit_nr, kvmppc_get_pc(vcpu), kvmppc_get_fault_dar(vcpu),
+		kvmppc_get_dec(vcpu), to_svcpu(vcpu)->shadow_srr1);
 #elif defined (EXIT_DEBUG_SIMPLE)
 	if ((exit_nr != 0x900) && (exit_nr != 0x500))
 		printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | dar=0x%lx | msr=0x%lx\n",
-			exit_nr, vcpu->arch.pc, vcpu->arch.fault_dear,
+			exit_nr, kvmppc_get_pc(vcpu), kvmppc_get_fault_dar(vcpu),
 			vcpu->arch.msr);
 #endif
 	kvm_resched(vcpu);
 	switch (exit_nr) {
 	case BOOK3S_INTERRUPT_INST_STORAGE:
 		vcpu->stat.pf_instruc++;
+
+#ifdef CONFIG_PPC_BOOK3S_32
+		/* We set segments as unused segments when invalidating them. So
+		 * treat the respective fault as segment fault. */
+		if (to_svcpu(vcpu)->sr[kvmppc_get_pc(vcpu) >> SID_SHIFT]
+		    == SR_INVALID) {
+			kvmppc_mmu_map_segment(vcpu, kvmppc_get_pc(vcpu));
+			r = RESUME_GUEST;
+			break;
+		}
+#endif
+
 		/* only care about PTEG not found errors, but leave NX alone */
-		if (vcpu->arch.shadow_srr1 & 0x40000000) {
-			r = kvmppc_handle_pagefault(run, vcpu, vcpu->arch.pc, exit_nr);
+		if (to_svcpu(vcpu)->shadow_srr1 & 0x40000000) {
+			r = kvmppc_handle_pagefault(run, vcpu, kvmppc_get_pc(vcpu), exit_nr);
 			vcpu->stat.sp_instruc++;
 		} else if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
 			  (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32))) {
@@ -719,37 +833,52 @@
 			 *     so we can't use the NX bit inside the guest. Let's cross our fingers,
 			 *     that no guest that needs the dcbz hack does NX.
 			 */
-			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL);
+			kvmppc_mmu_pte_flush(vcpu, kvmppc_get_pc(vcpu), ~0xFFFUL);
+			r = RESUME_GUEST;
 		} else {
-			vcpu->arch.msr |= vcpu->arch.shadow_srr1 & 0x58000000;
+			vcpu->arch.msr |= to_svcpu(vcpu)->shadow_srr1 & 0x58000000;
 			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
-			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL);
+			kvmppc_mmu_pte_flush(vcpu, kvmppc_get_pc(vcpu), ~0xFFFUL);
 			r = RESUME_GUEST;
 		}
 		break;
 	case BOOK3S_INTERRUPT_DATA_STORAGE:
+	{
+		ulong dar = kvmppc_get_fault_dar(vcpu);
 		vcpu->stat.pf_storage++;
+
+#ifdef CONFIG_PPC_BOOK3S_32
+		/* We set segments as unused segments when invalidating them. So
+		 * treat the respective fault as segment fault. */
+		if ((to_svcpu(vcpu)->sr[dar >> SID_SHIFT]) == SR_INVALID) {
+			kvmppc_mmu_map_segment(vcpu, dar);
+			r = RESUME_GUEST;
+			break;
+		}
+#endif
+
 		/* The only case we need to handle is missing shadow PTEs */
-		if (vcpu->arch.fault_dsisr & DSISR_NOHPTE) {
-			r = kvmppc_handle_pagefault(run, vcpu, vcpu->arch.fault_dear, exit_nr);
+		if (to_svcpu(vcpu)->fault_dsisr & DSISR_NOHPTE) {
+			r = kvmppc_handle_pagefault(run, vcpu, dar, exit_nr);
 		} else {
-			vcpu->arch.dear = vcpu->arch.fault_dear;
-			to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr;
+			vcpu->arch.dear = dar;
+			to_book3s(vcpu)->dsisr = to_svcpu(vcpu)->fault_dsisr;
 			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
-			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.dear, ~0xFFFULL);
+			kvmppc_mmu_pte_flush(vcpu, vcpu->arch.dear, ~0xFFFUL);
 			r = RESUME_GUEST;
 		}
 		break;
+	}
 	case BOOK3S_INTERRUPT_DATA_SEGMENT:
-		if (kvmppc_mmu_map_segment(vcpu, vcpu->arch.fault_dear) < 0) {
-			vcpu->arch.dear = vcpu->arch.fault_dear;
+		if (kvmppc_mmu_map_segment(vcpu, kvmppc_get_fault_dar(vcpu)) < 0) {
+			vcpu->arch.dear = kvmppc_get_fault_dar(vcpu);
 			kvmppc_book3s_queue_irqprio(vcpu,
 				BOOK3S_INTERRUPT_DATA_SEGMENT);
 		}
 		r = RESUME_GUEST;
 		break;
 	case BOOK3S_INTERRUPT_INST_SEGMENT:
-		if (kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc) < 0) {
+		if (kvmppc_mmu_map_segment(vcpu, kvmppc_get_pc(vcpu)) < 0) {
 			kvmppc_book3s_queue_irqprio(vcpu,
 				BOOK3S_INTERRUPT_INST_SEGMENT);
 		}
@@ -764,18 +893,22 @@
 		vcpu->stat.ext_intr_exits++;
 		r = RESUME_GUEST;
 		break;
+	case BOOK3S_INTERRUPT_PERFMON:
+		r = RESUME_GUEST;
+		break;
 	case BOOK3S_INTERRUPT_PROGRAM:
 	{
 		enum emulation_result er;
 		ulong flags;
 
-		flags = vcpu->arch.shadow_srr1 & 0x1f0000ull;
+program_interrupt:
+		flags = to_svcpu(vcpu)->shadow_srr1 & 0x1f0000ull;
 
 		if (vcpu->arch.msr & MSR_PR) {
 #ifdef EXIT_DEBUG
-			printk(KERN_INFO "Userspace triggered 0x700 exception at 0x%lx (0x%x)\n", vcpu->arch.pc, vcpu->arch.last_inst);
+			printk(KERN_INFO "Userspace triggered 0x700 exception at 0x%lx (0x%x)\n", kvmppc_get_pc(vcpu), kvmppc_get_last_inst(vcpu));
 #endif
-			if ((vcpu->arch.last_inst & 0xff0007ff) !=
+			if ((kvmppc_get_last_inst(vcpu) & 0xff0007ff) !=
 			    (INS_DCBZ & 0xfffffff7)) {
 				kvmppc_core_queue_program(vcpu, flags);
 				r = RESUME_GUEST;
@@ -789,33 +922,80 @@
 		case EMULATE_DONE:
 			r = RESUME_GUEST_NV;
 			break;
+		case EMULATE_AGAIN:
+			r = RESUME_GUEST;
+			break;
 		case EMULATE_FAIL:
 			printk(KERN_CRIT "%s: emulation at %lx failed (%08x)\n",
-			       __func__, vcpu->arch.pc, vcpu->arch.last_inst);
+			       __func__, kvmppc_get_pc(vcpu), kvmppc_get_last_inst(vcpu));
 			kvmppc_core_queue_program(vcpu, flags);
 			r = RESUME_GUEST;
 			break;
+		case EMULATE_DO_MMIO:
+			run->exit_reason = KVM_EXIT_MMIO;
+			r = RESUME_HOST_NV;
+			break;
 		default:
 			BUG();
 		}
 		break;
 	}
 	case BOOK3S_INTERRUPT_SYSCALL:
-#ifdef EXIT_DEBUG
-		printk(KERN_INFO "Syscall Nr %d\n", (int)kvmppc_get_gpr(vcpu, 0));
-#endif
-		vcpu->stat.syscall_exits++;
-		kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
-		r = RESUME_GUEST;
+		// XXX make user settable
+		if (vcpu->arch.osi_enabled &&
+		    (((u32)kvmppc_get_gpr(vcpu, 3)) == OSI_SC_MAGIC_R3) &&
+		    (((u32)kvmppc_get_gpr(vcpu, 4)) == OSI_SC_MAGIC_R4)) {
+			u64 *gprs = run->osi.gprs;
+			int i;
+
+			run->exit_reason = KVM_EXIT_OSI;
+			for (i = 0; i < 32; i++)
+				gprs[i] = kvmppc_get_gpr(vcpu, i);
+			vcpu->arch.osi_needed = 1;
+			r = RESUME_HOST_NV;
+
+		} else {
+			vcpu->stat.syscall_exits++;
+			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+			r = RESUME_GUEST;
+		}
 		break;
 	case BOOK3S_INTERRUPT_FP_UNAVAIL:
-		r = kvmppc_handle_ext(vcpu, exit_nr, MSR_FP);
-		break;
 	case BOOK3S_INTERRUPT_ALTIVEC:
-		r = kvmppc_handle_ext(vcpu, exit_nr, MSR_VEC);
-		break;
 	case BOOK3S_INTERRUPT_VSX:
-		r = kvmppc_handle_ext(vcpu, exit_nr, MSR_VSX);
+	{
+		int ext_msr = 0;
+
+		switch (exit_nr) {
+		case BOOK3S_INTERRUPT_FP_UNAVAIL: ext_msr = MSR_FP;  break;
+		case BOOK3S_INTERRUPT_ALTIVEC:    ext_msr = MSR_VEC; break;
+		case BOOK3S_INTERRUPT_VSX:        ext_msr = MSR_VSX; break;
+		}
+
+		switch (kvmppc_check_ext(vcpu, exit_nr)) {
+		case EMULATE_DONE:
+			/* everything ok - let's enable the ext */
+			r = kvmppc_handle_ext(vcpu, exit_nr, ext_msr);
+			break;
+		case EMULATE_FAIL:
+			/* we need to emulate this instruction */
+			goto program_interrupt;
+			break;
+		default:
+			/* nothing to worry about - go again */
+			break;
+		}
+		break;
+	}
+	case BOOK3S_INTERRUPT_ALIGNMENT:
+		if (kvmppc_read_inst(vcpu) == EMULATE_DONE) {
+			to_book3s(vcpu)->dsisr = kvmppc_alignment_dsisr(vcpu,
+				kvmppc_get_last_inst(vcpu));
+			vcpu->arch.dear = kvmppc_alignment_dar(vcpu,
+				kvmppc_get_last_inst(vcpu));
+			kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+		}
+		r = RESUME_GUEST;
 		break;
 	case BOOK3S_INTERRUPT_MACHINE_CHECK:
 	case BOOK3S_INTERRUPT_TRACE:
@@ -825,7 +1005,7 @@
 	default:
 		/* Ugh - bork here! What did we get? */
 		printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | msr=0x%lx\n",
-			exit_nr, vcpu->arch.pc, vcpu->arch.shadow_srr1);
+			exit_nr, kvmppc_get_pc(vcpu), to_svcpu(vcpu)->shadow_srr1);
 		r = RESUME_HOST;
 		BUG();
 		break;
@@ -852,7 +1032,7 @@
 	}
 
 #ifdef EXIT_DEBUG
-	printk(KERN_EMERG "KVM exit: vcpu=0x%p pc=0x%lx r=0x%x\n", vcpu, vcpu->arch.pc, r);
+	printk(KERN_EMERG "KVM exit: vcpu=0x%p pc=0x%lx r=0x%x\n", vcpu, kvmppc_get_pc(vcpu), r);
 #endif
 
 	return r;
@@ -867,10 +1047,12 @@
 {
 	int i;
 
-	regs->pc = vcpu->arch.pc;
+	vcpu_load(vcpu);
+
+	regs->pc = kvmppc_get_pc(vcpu);
 	regs->cr = kvmppc_get_cr(vcpu);
-	regs->ctr = vcpu->arch.ctr;
-	regs->lr = vcpu->arch.lr;
+	regs->ctr = kvmppc_get_ctr(vcpu);
+	regs->lr = kvmppc_get_lr(vcpu);
 	regs->xer = kvmppc_get_xer(vcpu);
 	regs->msr = vcpu->arch.msr;
 	regs->srr0 = vcpu->arch.srr0;
@@ -887,6 +1069,8 @@
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
 		regs->gpr[i] = kvmppc_get_gpr(vcpu, i);
 
+	vcpu_put(vcpu);
+
 	return 0;
 }
 
@@ -894,10 +1078,12 @@
 {
 	int i;
 
-	vcpu->arch.pc = regs->pc;
+	vcpu_load(vcpu);
+
+	kvmppc_set_pc(vcpu, regs->pc);
 	kvmppc_set_cr(vcpu, regs->cr);
-	vcpu->arch.ctr = regs->ctr;
-	vcpu->arch.lr = regs->lr;
+	kvmppc_set_ctr(vcpu, regs->ctr);
+	kvmppc_set_lr(vcpu, regs->lr);
 	kvmppc_set_xer(vcpu, regs->xer);
 	kvmppc_set_msr(vcpu, regs->msr);
 	vcpu->arch.srr0 = regs->srr0;
@@ -913,6 +1099,8 @@
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
 		kvmppc_set_gpr(vcpu, i, regs->gpr[i]);
 
+	vcpu_put(vcpu);
+
 	return 0;
 }
 
@@ -922,6 +1110,8 @@
 	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
 	int i;
 
+	vcpu_load(vcpu);
+
 	sregs->pvr = vcpu->arch.pvr;
 
 	sregs->u.s.sdr1 = to_book3s(vcpu)->sdr1;
@@ -940,6 +1130,9 @@
 			sregs->u.s.ppc32.dbat[i] = vcpu3s->dbat[i].raw;
 		}
 	}
+
+	vcpu_put(vcpu);
+
 	return 0;
 }
 
@@ -949,6 +1142,8 @@
 	struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
 	int i;
 
+	vcpu_load(vcpu);
+
 	kvmppc_set_pvr(vcpu, sregs->pvr);
 
 	vcpu3s->sdr1 = sregs->u.s.sdr1;
@@ -975,6 +1170,9 @@
 
 	/* Flush the MMU after messing with the segments */
 	kvmppc_mmu_pte_flush(vcpu, 0, 0);
+
+	vcpu_put(vcpu);
+
 	return 0;
 }
 
@@ -1042,24 +1240,33 @@
 {
 	struct kvmppc_vcpu_book3s *vcpu_book3s;
 	struct kvm_vcpu *vcpu;
-	int err;
+	int err = -ENOMEM;
 
-	vcpu_book3s = (struct kvmppc_vcpu_book3s *)__get_free_pages( GFP_KERNEL | __GFP_ZERO,
-			get_order(sizeof(struct kvmppc_vcpu_book3s)));
-	if (!vcpu_book3s) {
-		err = -ENOMEM;
+	vcpu_book3s = vmalloc(sizeof(struct kvmppc_vcpu_book3s));
+	if (!vcpu_book3s)
 		goto out;
-	}
+
+	memset(vcpu_book3s, 0, sizeof(struct kvmppc_vcpu_book3s));
+
+	vcpu_book3s->shadow_vcpu = (struct kvmppc_book3s_shadow_vcpu *)
+		kzalloc(sizeof(*vcpu_book3s->shadow_vcpu), GFP_KERNEL);
+	if (!vcpu_book3s->shadow_vcpu)
+		goto free_vcpu;
 
 	vcpu = &vcpu_book3s->vcpu;
 	err = kvm_vcpu_init(vcpu, kvm, id);
 	if (err)
-		goto free_vcpu;
+		goto free_shadow_vcpu;
 
 	vcpu->arch.host_retip = kvm_return_point;
 	vcpu->arch.host_msr = mfmsr();
+#ifdef CONFIG_PPC_BOOK3S_64
 	/* default to book3s_64 (970fx) */
 	vcpu->arch.pvr = 0x3C0301;
+#else
+	/* default to book3s_32 (750) */
+	vcpu->arch.pvr = 0x84202;
+#endif
 	kvmppc_set_pvr(vcpu, vcpu->arch.pvr);
 	vcpu_book3s->slb_nr = 64;
 
@@ -1067,23 +1274,24 @@
 	vcpu->arch.trampoline_lowmem = kvmppc_trampoline_lowmem;
 	vcpu->arch.trampoline_enter = kvmppc_trampoline_enter;
 	vcpu->arch.highmem_handler = (ulong)kvmppc_handler_highmem;
+#ifdef CONFIG_PPC_BOOK3S_64
 	vcpu->arch.rmcall = *(ulong*)kvmppc_rmcall;
+#else
+	vcpu->arch.rmcall = (ulong)kvmppc_rmcall;
+#endif
 
 	vcpu->arch.shadow_msr = MSR_USER64;
 
-	err = __init_new_context();
+	err = kvmppc_mmu_init(vcpu);
 	if (err < 0)
-		goto free_vcpu;
-	vcpu_book3s->context_id = err;
-
-	vcpu_book3s->vsid_max = ((vcpu_book3s->context_id + 1) << USER_ESID_BITS) - 1;
-	vcpu_book3s->vsid_first = vcpu_book3s->context_id << USER_ESID_BITS;
-	vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+		goto free_shadow_vcpu;
 
 	return vcpu;
 
+free_shadow_vcpu:
+	kfree(vcpu_book3s->shadow_vcpu);
 free_vcpu:
-	free_pages((long)vcpu_book3s, get_order(sizeof(struct kvmppc_vcpu_book3s)));
+	vfree(vcpu_book3s);
 out:
 	return ERR_PTR(err);
 }
@@ -1092,9 +1300,9 @@
 {
 	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
 
-	__destroy_context(vcpu_book3s->context_id);
 	kvm_vcpu_uninit(vcpu);
-	free_pages((long)vcpu_book3s, get_order(sizeof(struct kvmppc_vcpu_book3s)));
+	kfree(vcpu_book3s->shadow_vcpu);
+	vfree(vcpu_book3s);
 }
 
 extern int __kvmppc_vcpu_entry(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
@@ -1102,8 +1310,12 @@
 {
 	int ret;
 	struct thread_struct ext_bkp;
+#ifdef CONFIG_ALTIVEC
 	bool save_vec = current->thread.used_vr;
+#endif
+#ifdef CONFIG_VSX
 	bool save_vsx = current->thread.used_vsr;
+#endif
 	ulong ext_msr;
 
 	/* No need to go into the guest when all we do is going out */
@@ -1144,6 +1356,10 @@
 	/* XXX we get called with irq disabled - change that! */
 	local_irq_enable();
 
+	/* Preload FPU if it's enabled */
+	if (vcpu->arch.msr & MSR_FP)
+		kvmppc_handle_ext(vcpu, BOOK3S_INTERRUPT_FP_UNAVAIL, MSR_FP);
+
 	ret = __kvmppc_vcpu_entry(kvm_run, vcpu);
 
 	local_irq_disable();
@@ -1179,7 +1395,8 @@
 
 static int kvmppc_book3s_init(void)
 {
-	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_book3s), THIS_MODULE);
+	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_book3s), 0,
+			THIS_MODULE);
 }
 
 static void kvmppc_book3s_exit(void)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_emulate.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_emulate.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_emulate.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_emulate.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,573 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/kvm_ppc.h>
+#include <asm/disassemble.h>
+#include <asm/kvm_book3s.h>
+#include <asm/reg.h>
+
+#define OP_19_XOP_RFID		18
+#define OP_19_XOP_RFI		50
+
+#define OP_31_XOP_MFMSR		83
+#define OP_31_XOP_MTMSR		146
+#define OP_31_XOP_MTMSRD	178
+#define OP_31_XOP_MTSR		210
+#define OP_31_XOP_MTSRIN	242
+#define OP_31_XOP_TLBIEL	274
+#define OP_31_XOP_TLBIE		306
+#define OP_31_XOP_SLBMTE	402
+#define OP_31_XOP_SLBIE		434
+#define OP_31_XOP_SLBIA		498
+#define OP_31_XOP_MFSR		595
+#define OP_31_XOP_MFSRIN	659
+#define OP_31_XOP_DCBA		758
+#define OP_31_XOP_SLBMFEV	851
+#define OP_31_XOP_EIOIO		854
+#define OP_31_XOP_SLBMFEE	915
+
+/* DCBZ is actually 1014, but we patch it to 1010 so we get a trap */
+#define OP_31_XOP_DCBZ		1010
+
+#define OP_LFS			48
+#define OP_LFD			50
+#define OP_STFS			52
+#define OP_STFD			54
+
+#define SPRN_GQR0		912
+#define SPRN_GQR1		913
+#define SPRN_GQR2		914
+#define SPRN_GQR3		915
+#define SPRN_GQR4		916
+#define SPRN_GQR5		917
+#define SPRN_GQR6		918
+#define SPRN_GQR7		919
+
+/* Book3S_32 defines mfsrin(v) - but that messes up our abstract
+ * function pointers, so let's just disable the define. */
+#undef mfsrin
+
+int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                           unsigned int inst, int *advance)
+{
+	int emulated = EMULATE_DONE;
+
+	switch (get_op(inst)) {
+	case 19:
+		switch (get_xop(inst)) {
+		case OP_19_XOP_RFID:
+		case OP_19_XOP_RFI:
+			kvmppc_set_pc(vcpu, vcpu->arch.srr0);
+			kvmppc_set_msr(vcpu, vcpu->arch.srr1);
+			*advance = 0;
+			break;
+
+		default:
+			emulated = EMULATE_FAIL;
+			break;
+		}
+		break;
+	case 31:
+		switch (get_xop(inst)) {
+		case OP_31_XOP_MFMSR:
+			kvmppc_set_gpr(vcpu, get_rt(inst), vcpu->arch.msr);
+			break;
+		case OP_31_XOP_MTMSRD:
+		{
+			ulong rs = kvmppc_get_gpr(vcpu, get_rs(inst));
+			if (inst & 0x10000) {
+				vcpu->arch.msr &= ~(MSR_RI | MSR_EE);
+				vcpu->arch.msr |= rs & (MSR_RI | MSR_EE);
+			} else
+				kvmppc_set_msr(vcpu, rs);
+			break;
+		}
+		case OP_31_XOP_MTMSR:
+			kvmppc_set_msr(vcpu, kvmppc_get_gpr(vcpu, get_rs(inst)));
+			break;
+		case OP_31_XOP_MFSR:
+		{
+			int srnum;
+
+			srnum = kvmppc_get_field(inst, 12 + 32, 15 + 32);
+			if (vcpu->arch.mmu.mfsrin) {
+				u32 sr;
+				sr = vcpu->arch.mmu.mfsrin(vcpu, srnum);
+				kvmppc_set_gpr(vcpu, get_rt(inst), sr);
+			}
+			break;
+		}
+		case OP_31_XOP_MFSRIN:
+		{
+			int srnum;
+
+			srnum = (kvmppc_get_gpr(vcpu, get_rb(inst)) >> 28) & 0xf;
+			if (vcpu->arch.mmu.mfsrin) {
+				u32 sr;
+				sr = vcpu->arch.mmu.mfsrin(vcpu, srnum);
+				kvmppc_set_gpr(vcpu, get_rt(inst), sr);
+			}
+			break;
+		}
+		case OP_31_XOP_MTSR:
+			vcpu->arch.mmu.mtsrin(vcpu,
+				(inst >> 16) & 0xf,
+				kvmppc_get_gpr(vcpu, get_rs(inst)));
+			break;
+		case OP_31_XOP_MTSRIN:
+			vcpu->arch.mmu.mtsrin(vcpu,
+				(kvmppc_get_gpr(vcpu, get_rb(inst)) >> 28) & 0xf,
+				kvmppc_get_gpr(vcpu, get_rs(inst)));
+			break;
+		case OP_31_XOP_TLBIE:
+		case OP_31_XOP_TLBIEL:
+		{
+			bool large = (inst & 0x00200000) ? true : false;
+			ulong addr = kvmppc_get_gpr(vcpu, get_rb(inst));
+			vcpu->arch.mmu.tlbie(vcpu, addr, large);
+			break;
+		}
+		case OP_31_XOP_EIOIO:
+			break;
+		case OP_31_XOP_SLBMTE:
+			if (!vcpu->arch.mmu.slbmte)
+				return EMULATE_FAIL;
+
+			vcpu->arch.mmu.slbmte(vcpu,
+					kvmppc_get_gpr(vcpu, get_rs(inst)),
+					kvmppc_get_gpr(vcpu, get_rb(inst)));
+			break;
+		case OP_31_XOP_SLBIE:
+			if (!vcpu->arch.mmu.slbie)
+				return EMULATE_FAIL;
+
+			vcpu->arch.mmu.slbie(vcpu,
+					kvmppc_get_gpr(vcpu, get_rb(inst)));
+			break;
+		case OP_31_XOP_SLBIA:
+			if (!vcpu->arch.mmu.slbia)
+				return EMULATE_FAIL;
+
+			vcpu->arch.mmu.slbia(vcpu);
+			break;
+		case OP_31_XOP_SLBMFEE:
+			if (!vcpu->arch.mmu.slbmfee) {
+				emulated = EMULATE_FAIL;
+			} else {
+				ulong t, rb;
+
+				rb = kvmppc_get_gpr(vcpu, get_rb(inst));
+				t = vcpu->arch.mmu.slbmfee(vcpu, rb);
+				kvmppc_set_gpr(vcpu, get_rt(inst), t);
+			}
+			break;
+		case OP_31_XOP_SLBMFEV:
+			if (!vcpu->arch.mmu.slbmfev) {
+				emulated = EMULATE_FAIL;
+			} else {
+				ulong t, rb;
+
+				rb = kvmppc_get_gpr(vcpu, get_rb(inst));
+				t = vcpu->arch.mmu.slbmfev(vcpu, rb);
+				kvmppc_set_gpr(vcpu, get_rt(inst), t);
+			}
+			break;
+		case OP_31_XOP_DCBA:
+			/* Gets treated as NOP */
+			break;
+		case OP_31_XOP_DCBZ:
+		{
+			ulong rb = kvmppc_get_gpr(vcpu, get_rb(inst));
+			ulong ra = 0;
+			ulong addr, vaddr;
+			u32 zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+			u32 dsisr;
+			int r;
+
+			if (get_ra(inst))
+				ra = kvmppc_get_gpr(vcpu, get_ra(inst));
+
+			addr = (ra + rb) & ~31ULL;
+			if (!(vcpu->arch.msr & MSR_SF))
+				addr &= 0xffffffff;
+			vaddr = addr;
+
+			r = kvmppc_st(vcpu, &addr, 32, zeros, true);
+			if ((r == -ENOENT) || (r == -EPERM)) {
+				*advance = 0;
+				vcpu->arch.dear = vaddr;
+				to_svcpu(vcpu)->fault_dar = vaddr;
+
+				dsisr = DSISR_ISSTORE;
+				if (r == -ENOENT)
+					dsisr |= DSISR_NOHPTE;
+				else if (r == -EPERM)
+					dsisr |= DSISR_PROTFAULT;
+
+				to_book3s(vcpu)->dsisr = dsisr;
+				to_svcpu(vcpu)->fault_dsisr = dsisr;
+
+				kvmppc_book3s_queue_irqprio(vcpu,
+					BOOK3S_INTERRUPT_DATA_STORAGE);
+			}
+
+			break;
+		}
+		default:
+			emulated = EMULATE_FAIL;
+		}
+		break;
+	default:
+		emulated = EMULATE_FAIL;
+	}
+
+	if (emulated == EMULATE_FAIL)
+		emulated = kvmppc_emulate_paired_single(run, vcpu);
+
+	return emulated;
+}
+
+void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat, bool upper,
+                    u32 val)
+{
+	if (upper) {
+		/* Upper BAT */
+		u32 bl = (val >> 2) & 0x7ff;
+		bat->bepi_mask = (~bl << 17);
+		bat->bepi = val & 0xfffe0000;
+		bat->vs = (val & 2) ? 1 : 0;
+		bat->vp = (val & 1) ? 1 : 0;
+		bat->raw = (bat->raw & 0xffffffff00000000ULL) | val;
+	} else {
+		/* Lower BAT */
+		bat->brpn = val & 0xfffe0000;
+		bat->wimg = (val >> 3) & 0xf;
+		bat->pp = val & 3;
+		bat->raw = (bat->raw & 0x00000000ffffffffULL) | ((u64)val << 32);
+	}
+}
+
+static u32 kvmppc_read_bat(struct kvm_vcpu *vcpu, int sprn)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_bat *bat;
+
+	switch (sprn) {
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+		bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT0U) / 2];
+		break;
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+		bat = &vcpu_book3s->ibat[4 + ((sprn - SPRN_IBAT4U) / 2)];
+		break;
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+		bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT0U) / 2];
+		break;
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		bat = &vcpu_book3s->dbat[4 + ((sprn - SPRN_DBAT4U) / 2)];
+		break;
+	default:
+		BUG();
+	}
+
+	if (sprn % 2)
+		return bat->raw >> 32;
+	else
+		return bat->raw;
+}
+
+static void kvmppc_write_bat(struct kvm_vcpu *vcpu, int sprn, u32 val)
+{
+	struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+	struct kvmppc_bat *bat;
+
+	switch (sprn) {
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+		bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT0U) / 2];
+		break;
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+		bat = &vcpu_book3s->ibat[4 + ((sprn - SPRN_IBAT4U) / 2)];
+		break;
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+		bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT0U) / 2];
+		break;
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		bat = &vcpu_book3s->dbat[4 + ((sprn - SPRN_DBAT4U) / 2)];
+		break;
+	default:
+		BUG();
+	}
+
+	kvmppc_set_bat(vcpu, bat, !(sprn % 2), val);
+}
+
+int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
+{
+	int emulated = EMULATE_DONE;
+	ulong spr_val = kvmppc_get_gpr(vcpu, rs);
+
+	switch (sprn) {
+	case SPRN_SDR1:
+		to_book3s(vcpu)->sdr1 = spr_val;
+		break;
+	case SPRN_DSISR:
+		to_book3s(vcpu)->dsisr = spr_val;
+		break;
+	case SPRN_DAR:
+		vcpu->arch.dear = spr_val;
+		break;
+	case SPRN_HIOR:
+		to_book3s(vcpu)->hior = spr_val;
+		break;
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		kvmppc_write_bat(vcpu, sprn, (u32)spr_val);
+		/* BAT writes happen so rarely that we're ok to flush
+		 * everything here */
+		kvmppc_mmu_pte_flush(vcpu, 0, 0);
+		kvmppc_mmu_flush_segments(vcpu);
+		break;
+	case SPRN_HID0:
+		to_book3s(vcpu)->hid[0] = spr_val;
+		break;
+	case SPRN_HID1:
+		to_book3s(vcpu)->hid[1] = spr_val;
+		break;
+	case SPRN_HID2:
+		to_book3s(vcpu)->hid[2] = spr_val;
+		break;
+	case SPRN_HID2_GEKKO:
+		to_book3s(vcpu)->hid[2] = spr_val;
+		/* HID2.PSE controls paired single on gekko */
+		switch (vcpu->arch.pvr) {
+		case 0x00080200:	/* lonestar 2.0 */
+		case 0x00088202:	/* lonestar 2.2 */
+		case 0x70000100:	/* gekko 1.0 */
+		case 0x00080100:	/* gekko 2.0 */
+		case 0x00083203:	/* gekko 2.3a */
+		case 0x00083213:	/* gekko 2.3b */
+		case 0x00083204:	/* gekko 2.4 */
+		case 0x00083214:	/* gekko 2.4e (8SE) - retail HW2 */
+		case 0x00087200:	/* broadway */
+			if (vcpu->arch.hflags & BOOK3S_HFLAG_NATIVE_PS) {
+				/* Native paired singles */
+			} else if (spr_val & (1 << 29)) { /* HID2.PSE */
+				vcpu->arch.hflags |= BOOK3S_HFLAG_PAIRED_SINGLE;
+				kvmppc_giveup_ext(vcpu, MSR_FP);
+			} else {
+				vcpu->arch.hflags &= ~BOOK3S_HFLAG_PAIRED_SINGLE;
+			}
+			break;
+		}
+		break;
+	case SPRN_HID4:
+	case SPRN_HID4_GEKKO:
+		to_book3s(vcpu)->hid[4] = spr_val;
+		break;
+	case SPRN_HID5:
+		to_book3s(vcpu)->hid[5] = spr_val;
+		/* guest HID5 set can change is_dcbz32 */
+		if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+		    (mfmsr() & MSR_HV))
+			vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
+		break;
+	case SPRN_GQR0:
+	case SPRN_GQR1:
+	case SPRN_GQR2:
+	case SPRN_GQR3:
+	case SPRN_GQR4:
+	case SPRN_GQR5:
+	case SPRN_GQR6:
+	case SPRN_GQR7:
+		to_book3s(vcpu)->gqr[sprn - SPRN_GQR0] = spr_val;
+		break;
+	case SPRN_ICTC:
+	case SPRN_THRM1:
+	case SPRN_THRM2:
+	case SPRN_THRM3:
+	case SPRN_CTRLF:
+	case SPRN_CTRLT:
+	case SPRN_L2CR:
+	case SPRN_MMCR0_GEKKO:
+	case SPRN_MMCR1_GEKKO:
+	case SPRN_PMC1_GEKKO:
+	case SPRN_PMC2_GEKKO:
+	case SPRN_PMC3_GEKKO:
+	case SPRN_PMC4_GEKKO:
+	case SPRN_WPAR_GEKKO:
+		break;
+	default:
+		printk(KERN_INFO "KVM: invalid SPR write: %d\n", sprn);
+#ifndef DEBUG_SPR
+		emulated = EMULATE_FAIL;
+#endif
+		break;
+	}
+
+	return emulated;
+}
+
+int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
+{
+	int emulated = EMULATE_DONE;
+
+	switch (sprn) {
+	case SPRN_IBAT0U ... SPRN_IBAT3L:
+	case SPRN_IBAT4U ... SPRN_IBAT7L:
+	case SPRN_DBAT0U ... SPRN_DBAT3L:
+	case SPRN_DBAT4U ... SPRN_DBAT7L:
+		kvmppc_set_gpr(vcpu, rt, kvmppc_read_bat(vcpu, sprn));
+		break;
+	case SPRN_SDR1:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->sdr1);
+		break;
+	case SPRN_DSISR:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->dsisr);
+		break;
+	case SPRN_DAR:
+		kvmppc_set_gpr(vcpu, rt, vcpu->arch.dear);
+		break;
+	case SPRN_HIOR:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hior);
+		break;
+	case SPRN_HID0:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[0]);
+		break;
+	case SPRN_HID1:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[1]);
+		break;
+	case SPRN_HID2:
+	case SPRN_HID2_GEKKO:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[2]);
+		break;
+	case SPRN_HID4:
+	case SPRN_HID4_GEKKO:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[4]);
+		break;
+	case SPRN_HID5:
+		kvmppc_set_gpr(vcpu, rt, to_book3s(vcpu)->hid[5]);
+		break;
+	case SPRN_GQR0:
+	case SPRN_GQR1:
+	case SPRN_GQR2:
+	case SPRN_GQR3:
+	case SPRN_GQR4:
+	case SPRN_GQR5:
+	case SPRN_GQR6:
+	case SPRN_GQR7:
+		kvmppc_set_gpr(vcpu, rt,
+			       to_book3s(vcpu)->gqr[sprn - SPRN_GQR0]);
+		break;
+	case SPRN_THRM1:
+	case SPRN_THRM2:
+	case SPRN_THRM3:
+	case SPRN_CTRLF:
+	case SPRN_CTRLT:
+	case SPRN_L2CR:
+	case SPRN_MMCR0_GEKKO:
+	case SPRN_MMCR1_GEKKO:
+	case SPRN_PMC1_GEKKO:
+	case SPRN_PMC2_GEKKO:
+	case SPRN_PMC3_GEKKO:
+	case SPRN_PMC4_GEKKO:
+	case SPRN_WPAR_GEKKO:
+		kvmppc_set_gpr(vcpu, rt, 0);
+		break;
+	default:
+		printk(KERN_INFO "KVM: invalid SPR read: %d\n", sprn);
+#ifndef DEBUG_SPR
+		emulated = EMULATE_FAIL;
+#endif
+		break;
+	}
+
+	return emulated;
+}
+
+u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst)
+{
+	u32 dsisr = 0;
+
+	/*
+	 * This is what the spec says about DSISR bits (not mentioned = 0):
+	 *
+	 * 12:13		[DS]	Set to bits 30:31
+	 * 15:16		[X]	Set to bits 29:30
+	 * 17			[X]	Set to bit 25
+	 *			[D/DS]	Set to bit 5
+	 * 18:21		[X]	Set to bits 21:24
+	 *			[D/DS]	Set to bits 1:4
+	 * 22:26			Set to bits 6:10 (RT/RS/FRT/FRS)
+	 * 27:31			Set to bits 11:15 (RA)
+	 */
+
+	switch (get_op(inst)) {
+	/* D-form */
+	case OP_LFS:
+	case OP_LFD:
+	case OP_STFD:
+	case OP_STFS:
+		dsisr |= (inst >> 12) & 0x4000;	/* bit 17 */
+		dsisr |= (inst >> 17) & 0x3c00; /* bits 18:21 */
+		break;
+	/* X-form */
+	case 31:
+		dsisr |= (inst << 14) & 0x18000; /* bits 15:16 */
+		dsisr |= (inst << 8)  & 0x04000; /* bit 17 */
+		dsisr |= (inst << 3)  & 0x03c00; /* bits 18:21 */
+		break;
+	default:
+		printk(KERN_INFO "KVM: Unaligned instruction 0x%x\n", inst);
+		break;
+	}
+
+	dsisr |= (inst >> 16) & 0x03ff; /* bits 22:31 */
+
+	return dsisr;
+}
+
+ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst)
+{
+	ulong dar = 0;
+	ulong ra;
+
+	switch (get_op(inst)) {
+	case OP_LFS:
+	case OP_LFD:
+	case OP_STFD:
+	case OP_STFS:
+		ra = get_ra(inst);
+		if (ra)
+			dar = kvmppc_get_gpr(vcpu, ra);
+		dar += (s32)((s16)inst);
+		break;
+	case 31:
+		ra = get_ra(inst);
+		if (ra)
+			dar = kvmppc_get_gpr(vcpu, ra);
+		dar += kvmppc_get_gpr(vcpu, get_rb(inst));
+		break;
+	default:
+		printk(KERN_INFO "KVM: Unaligned instruction 0x%x\n", inst);
+		break;
+	}
+
+	return dar;
+}
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_exports.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_exports.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_exports.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_exports.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,32 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <linux/module.h>
+#include <asm/kvm_book3s.h>
+
+EXPORT_SYMBOL_GPL(kvmppc_trampoline_enter);
+EXPORT_SYMBOL_GPL(kvmppc_trampoline_lowmem);
+EXPORT_SYMBOL_GPL(kvmppc_rmcall);
+EXPORT_SYMBOL_GPL(kvmppc_load_up_fpu);
+#ifdef CONFIG_ALTIVEC
+EXPORT_SYMBOL_GPL(kvmppc_load_up_altivec);
+#endif
+#ifdef CONFIG_VSX
+EXPORT_SYMBOL_GPL(kvmppc_load_up_vsx);
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_interrupts.S linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_interrupts.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_interrupts.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_interrupts.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,320 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/kvm_asm.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+#include <asm/exception-64s.h>
+
+#if defined(CONFIG_PPC_BOOK3S_64)
+
+#define ULONG_SIZE 		8
+#define FUNC(name) 		GLUE(.,name)
+
+#define GET_SHADOW_VCPU(reg)    \
+        addi    reg, r13, PACA_KVM_SVCPU
+
+#define DISABLE_INTERRUPTS	\
+	mfmsr   r0;		\
+	rldicl  r0,r0,48,1;	\
+	rotldi  r0,r0,16;	\
+	mtmsrd  r0,1;		\
+
+#elif defined(CONFIG_PPC_BOOK3S_32)
+
+#define ULONG_SIZE              4
+#define FUNC(name)		name
+
+#define GET_SHADOW_VCPU(reg)    \
+        lwz     reg, (THREAD + THREAD_KVM_SVCPU)(r2)
+
+#define DISABLE_INTERRUPTS	\
+	mfmsr   r0;		\
+	rlwinm  r0,r0,0,17,15;	\
+	mtmsr   r0;		\
+
+#endif /* CONFIG_PPC_BOOK3S_XX */
+
+
+#define VCPU_GPR(n)		(VCPU_GPRS + (n * ULONG_SIZE))
+#define VCPU_LOAD_NVGPRS(vcpu) \
+	PPC_LL	r14, VCPU_GPR(r14)(vcpu); \
+	PPC_LL	r15, VCPU_GPR(r15)(vcpu); \
+	PPC_LL	r16, VCPU_GPR(r16)(vcpu); \
+	PPC_LL	r17, VCPU_GPR(r17)(vcpu); \
+	PPC_LL	r18, VCPU_GPR(r18)(vcpu); \
+	PPC_LL	r19, VCPU_GPR(r19)(vcpu); \
+	PPC_LL	r20, VCPU_GPR(r20)(vcpu); \
+	PPC_LL	r21, VCPU_GPR(r21)(vcpu); \
+	PPC_LL	r22, VCPU_GPR(r22)(vcpu); \
+	PPC_LL	r23, VCPU_GPR(r23)(vcpu); \
+	PPC_LL	r24, VCPU_GPR(r24)(vcpu); \
+	PPC_LL	r25, VCPU_GPR(r25)(vcpu); \
+	PPC_LL	r26, VCPU_GPR(r26)(vcpu); \
+	PPC_LL	r27, VCPU_GPR(r27)(vcpu); \
+	PPC_LL	r28, VCPU_GPR(r28)(vcpu); \
+	PPC_LL	r29, VCPU_GPR(r29)(vcpu); \
+	PPC_LL	r30, VCPU_GPR(r30)(vcpu); \
+	PPC_LL	r31, VCPU_GPR(r31)(vcpu); \
+
+/*****************************************************************************
+ *                                                                           *
+ *     Guest entry / exit code that is in kernel module memory (highmem)     *
+ *                                                                           *
+ ****************************************************************************/
+
+/* Registers:
+ *  r3: kvm_run pointer
+ *  r4: vcpu pointer
+ */
+_GLOBAL(__kvmppc_vcpu_entry)
+
+kvm_start_entry:
+	/* Write correct stack frame */
+	mflr	r0
+	PPC_STL	r0,PPC_LR_STKOFF(r1)
+
+	/* Save host state to the stack */
+	PPC_STLU r1, -SWITCH_FRAME_SIZE(r1)
+
+	/* Save r3 (kvm_run) and r4 (vcpu) */
+	SAVE_2GPRS(3, r1)
+
+	/* Save non-volatile registers (r14 - r31) */
+	SAVE_NVGPRS(r1)
+
+	/* Save LR */
+	PPC_STL	r0, _LINK(r1)
+
+	/* Load non-volatile guest state from the vcpu */
+	VCPU_LOAD_NVGPRS(r4)
+
+	GET_SHADOW_VCPU(r5)
+
+	/* Save R1/R2 in the PACA */
+	PPC_STL	r1, SVCPU_HOST_R1(r5)
+	PPC_STL	r2, SVCPU_HOST_R2(r5)
+
+	/* XXX swap in/out on load? */
+	PPC_LL	r3, VCPU_HIGHMEM_HANDLER(r4)
+	PPC_STL	r3, SVCPU_VMHANDLER(r5)
+
+kvm_start_lightweight:
+
+	PPC_LL	r10, VCPU_SHADOW_MSR(r4)	/* r10 = vcpu->arch.shadow_msr */
+
+	DISABLE_INTERRUPTS
+
+#ifdef CONFIG_PPC_BOOK3S_64
+	/* Some guests may need to have dcbz set to 32 byte length.
+	 *
+	 * Usually we ensure that by patching the guest's instructions
+	 * to trap on dcbz and emulate it in the hypervisor.
+	 *
+	 * If we can, we should tell the CPU to use 32 byte dcbz though,
+	 * because that's a lot faster.
+	 */
+
+	PPC_LL	r3, VCPU_HFLAGS(r4)
+	rldicl.	r3, r3, 0, 63		/* CR = ((r3 & 1) == 0) */
+	beq	no_dcbz32_on
+
+	mfspr   r3,SPRN_HID5
+	ori     r3, r3, 0x80		/* XXX HID5_dcbz32 = 0x80 */
+	mtspr   SPRN_HID5,r3
+
+no_dcbz32_on:
+
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
+	PPC_LL	r6, VCPU_RMCALL(r4)
+	mtctr	r6
+
+	PPC_LL	r3, VCPU_TRAMPOLINE_ENTER(r4)
+	LOAD_REG_IMMEDIATE(r4, MSR_KERNEL & ~(MSR_IR | MSR_DR))
+
+	/* Jump to segment patching handler and into our guest */
+	bctr
+
+/*
+ * This is the handler in module memory. It gets jumped at from the
+ * lowmem trampoline code, so it's basically the guest exit code.
+ *
+ */
+
+.global kvmppc_handler_highmem
+kvmppc_handler_highmem:
+
+	/*
+	 * Register usage at this point:
+	 *
+	 * R1       = host R1
+	 * R2       = host R2
+	 * R12      = exit handler id
+	 * R13      = PACA
+	 * SVCPU.*  = guest *
+	 *
+	 */
+
+	/* R7 = vcpu */
+	PPC_LL	r7, GPR4(r1)
+
+#ifdef CONFIG_PPC_BOOK3S_64
+
+	PPC_LL	r5, VCPU_HFLAGS(r7)
+	rldicl.	r5, r5, 0, 63		/* CR = ((r5 & 1) == 0) */
+	beq	no_dcbz32_off
+
+	li	r4, 0
+	mfspr   r5,SPRN_HID5
+	rldimi  r5,r4,6,56
+	mtspr   SPRN_HID5,r5
+
+no_dcbz32_off:
+
+#endif /* CONFIG_PPC_BOOK3S_64 */
+
+	PPC_STL	r14, VCPU_GPR(r14)(r7)
+	PPC_STL	r15, VCPU_GPR(r15)(r7)
+	PPC_STL	r16, VCPU_GPR(r16)(r7)
+	PPC_STL	r17, VCPU_GPR(r17)(r7)
+	PPC_STL	r18, VCPU_GPR(r18)(r7)
+	PPC_STL	r19, VCPU_GPR(r19)(r7)
+	PPC_STL	r20, VCPU_GPR(r20)(r7)
+	PPC_STL	r21, VCPU_GPR(r21)(r7)
+	PPC_STL	r22, VCPU_GPR(r22)(r7)
+	PPC_STL	r23, VCPU_GPR(r23)(r7)
+	PPC_STL	r24, VCPU_GPR(r24)(r7)
+	PPC_STL	r25, VCPU_GPR(r25)(r7)
+	PPC_STL	r26, VCPU_GPR(r26)(r7)
+	PPC_STL	r27, VCPU_GPR(r27)(r7)
+	PPC_STL	r28, VCPU_GPR(r28)(r7)
+	PPC_STL	r29, VCPU_GPR(r29)(r7)
+	PPC_STL	r30, VCPU_GPR(r30)(r7)
+	PPC_STL	r31, VCPU_GPR(r31)(r7)
+
+	/* Restore host msr -> SRR1 */
+	PPC_LL	r6, VCPU_HOST_MSR(r7)
+
+	/*
+	 * For some interrupts, we need to call the real Linux
+	 * handler, so it can do work for us. This has to happen
+	 * as if the interrupt arrived from the kernel though,
+	 * so let's fake it here where most state is restored.
+	 *
+	 * Call Linux for hardware interrupts/decrementer
+	 * r3 = address of interrupt handler (exit reason)
+	 */
+
+	cmpwi	r12, BOOK3S_INTERRUPT_EXTERNAL
+	beq	call_linux_handler
+	cmpwi	r12, BOOK3S_INTERRUPT_DECREMENTER
+	beq	call_linux_handler
+	cmpwi	r12, BOOK3S_INTERRUPT_PERFMON
+	beq	call_linux_handler
+
+	/* Back to EE=1 */
+	mtmsr	r6
+	sync
+	b	kvm_return_point
+
+call_linux_handler:
+
+	/*
+	 * If we land here we need to jump back to the handler we
+	 * came from.
+	 *
+	 * We have a page that we can access from real mode, so let's
+	 * jump back to that and use it as a trampoline to get back into the
+	 * interrupt handler!
+	 *
+	 * R3 still contains the exit code,
+	 * R5 VCPU_HOST_RETIP and
+	 * R6 VCPU_HOST_MSR
+	 */
+
+	/* Restore host IP -> SRR0 */
+	PPC_LL	r5, VCPU_HOST_RETIP(r7)
+
+	/* XXX Better move to a safe function?
+	 *     What if we get an HTAB flush in between mtsrr0 and mtsrr1? */
+
+	mtlr	r12
+
+	PPC_LL	r4, VCPU_TRAMPOLINE_LOWMEM(r7)
+	mtsrr0	r4
+	LOAD_REG_IMMEDIATE(r3, MSR_KERNEL & ~(MSR_IR | MSR_DR))
+	mtsrr1	r3
+
+	RFI
+
+.global kvm_return_point
+kvm_return_point:
+
+	/* Jump back to lightweight entry if we're supposed to */
+	/* go back into the guest */
+
+	/* Pass the exit number as 3rd argument to kvmppc_handle_exit */
+	mr	r5, r12
+
+	/* Restore r3 (kvm_run) and r4 (vcpu) */
+	REST_2GPRS(3, r1)
+	bl	FUNC(kvmppc_handle_exit)
+
+	/* If RESUME_GUEST, get back in the loop */
+	cmpwi	r3, RESUME_GUEST
+	beq	kvm_loop_lightweight
+
+	cmpwi	r3, RESUME_GUEST_NV
+	beq	kvm_loop_heavyweight
+
+kvm_exit_loop:
+
+	PPC_LL	r4, _LINK(r1)
+	mtlr	r4
+
+	/* Restore non-volatile host registers (r14 - r31) */
+	REST_NVGPRS(r1)
+
+	addi    r1, r1, SWITCH_FRAME_SIZE
+	blr
+
+kvm_loop_heavyweight:
+
+	PPC_LL	r4, _LINK(r1)
+	PPC_STL r4, (PPC_LR_STKOFF + SWITCH_FRAME_SIZE)(r1)
+
+	/* Load vcpu and cpu_run */
+	REST_2GPRS(3, r1)
+
+	/* Load non-volatile guest state from the vcpu */
+	VCPU_LOAD_NVGPRS(r4)
+
+	/* Jump back into the beginning of this function */
+	b	kvm_start_lightweight
+
+kvm_loop_lightweight:
+
+	/* We'll need the vcpu pointer */
+	REST_GPR(4, r1)
+
+	/* Jump back into the beginning of this function */
+	b	kvm_start_lightweight
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_paired_singles.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_paired_singles.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_paired_singles.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_paired_singles.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,1289 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright Novell Inc 2010
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/kvm.h>
+#include <asm/kvm_ppc.h>
+#include <asm/disassemble.h>
+#include <asm/kvm_book3s.h>
+#include <asm/kvm_fpu.h>
+#include <asm/reg.h>
+#include <asm/cacheflush.h>
+#include <linux/vmalloc.h>
+
+/* #define DEBUG */
+
+#ifdef DEBUG
+#define dprintk printk
+#else
+#define dprintk(...) do { } while(0);
+#endif
+
+#define OP_LFS			48
+#define OP_LFSU			49
+#define OP_LFD			50
+#define OP_LFDU			51
+#define OP_STFS			52
+#define OP_STFSU		53
+#define OP_STFD			54
+#define OP_STFDU		55
+#define OP_PSQ_L		56
+#define OP_PSQ_LU		57
+#define OP_PSQ_ST		60
+#define OP_PSQ_STU		61
+
+#define OP_31_LFSX		535
+#define OP_31_LFSUX		567
+#define OP_31_LFDX		599
+#define OP_31_LFDUX		631
+#define OP_31_STFSX		663
+#define OP_31_STFSUX		695
+#define OP_31_STFX		727
+#define OP_31_STFUX		759
+#define OP_31_LWIZX		887
+#define OP_31_STFIWX		983
+
+#define OP_59_FADDS		21
+#define OP_59_FSUBS		20
+#define OP_59_FSQRTS		22
+#define OP_59_FDIVS		18
+#define OP_59_FRES		24
+#define OP_59_FMULS		25
+#define OP_59_FRSQRTES		26
+#define OP_59_FMSUBS		28
+#define OP_59_FMADDS		29
+#define OP_59_FNMSUBS		30
+#define OP_59_FNMADDS		31
+
+#define OP_63_FCMPU		0
+#define OP_63_FCPSGN		8
+#define OP_63_FRSP		12
+#define OP_63_FCTIW		14
+#define OP_63_FCTIWZ		15
+#define OP_63_FDIV		18
+#define OP_63_FADD		21
+#define OP_63_FSQRT		22
+#define OP_63_FSEL		23
+#define OP_63_FRE		24
+#define OP_63_FMUL		25
+#define OP_63_FRSQRTE		26
+#define OP_63_FMSUB		28
+#define OP_63_FMADD		29
+#define OP_63_FNMSUB		30
+#define OP_63_FNMADD		31
+#define OP_63_FCMPO		32
+#define OP_63_MTFSB1		38 // XXX
+#define OP_63_FSUB		20
+#define OP_63_FNEG		40
+#define OP_63_MCRFS		64
+#define OP_63_MTFSB0		70
+#define OP_63_FMR		72
+#define OP_63_MTFSFI		134
+#define OP_63_FABS		264
+#define OP_63_MFFS		583
+#define OP_63_MTFSF		711
+
+#define OP_4X_PS_CMPU0		0
+#define OP_4X_PSQ_LX		6
+#define OP_4XW_PSQ_STX		7
+#define OP_4A_PS_SUM0		10
+#define OP_4A_PS_SUM1		11
+#define OP_4A_PS_MULS0		12
+#define OP_4A_PS_MULS1		13
+#define OP_4A_PS_MADDS0		14
+#define OP_4A_PS_MADDS1		15
+#define OP_4A_PS_DIV		18
+#define OP_4A_PS_SUB		20
+#define OP_4A_PS_ADD		21
+#define OP_4A_PS_SEL		23
+#define OP_4A_PS_RES		24
+#define OP_4A_PS_MUL		25
+#define OP_4A_PS_RSQRTE		26
+#define OP_4A_PS_MSUB		28
+#define OP_4A_PS_MADD		29
+#define OP_4A_PS_NMSUB		30
+#define OP_4A_PS_NMADD		31
+#define OP_4X_PS_CMPO0		32
+#define OP_4X_PSQ_LUX		38
+#define OP_4XW_PSQ_STUX		39
+#define OP_4X_PS_NEG		40
+#define OP_4X_PS_CMPU1		64
+#define OP_4X_PS_MR		72
+#define OP_4X_PS_CMPO1		96
+#define OP_4X_PS_NABS		136
+#define OP_4X_PS_ABS		264
+#define OP_4X_PS_MERGE00	528
+#define OP_4X_PS_MERGE01	560
+#define OP_4X_PS_MERGE10	592
+#define OP_4X_PS_MERGE11	624
+
+#define SCALAR_NONE		0
+#define SCALAR_HIGH		(1 << 0)
+#define SCALAR_LOW		(1 << 1)
+#define SCALAR_NO_PS0		(1 << 2)
+#define SCALAR_NO_PS1		(1 << 3)
+
+#define GQR_ST_TYPE_MASK	0x00000007
+#define GQR_ST_TYPE_SHIFT	0
+#define GQR_ST_SCALE_MASK	0x00003f00
+#define GQR_ST_SCALE_SHIFT	8
+#define GQR_LD_TYPE_MASK	0x00070000
+#define GQR_LD_TYPE_SHIFT	16
+#define GQR_LD_SCALE_MASK	0x3f000000
+#define GQR_LD_SCALE_SHIFT	24
+
+#define GQR_QUANTIZE_FLOAT	0
+#define GQR_QUANTIZE_U8		4
+#define GQR_QUANTIZE_U16	5
+#define GQR_QUANTIZE_S8		6
+#define GQR_QUANTIZE_S16	7
+
+#define FPU_LS_SINGLE		0
+#define FPU_LS_DOUBLE		1
+#define FPU_LS_SINGLE_LOW	2
+
+static inline void kvmppc_sync_qpr(struct kvm_vcpu *vcpu, int rt)
+{
+	struct thread_struct t;
+
+	t.fpscr.val = vcpu->arch.fpscr;
+	cvt_df((double*)&vcpu->arch.fpr[rt], (float*)&vcpu->arch.qpr[rt], &t);
+}
+
+static void kvmppc_inject_pf(struct kvm_vcpu *vcpu, ulong eaddr, bool is_store)
+{
+	u64 dsisr;
+
+	vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 33, 36, 0);
+	vcpu->arch.msr = kvmppc_set_field(vcpu->arch.msr, 42, 47, 0);
+	vcpu->arch.dear = eaddr;
+	/* Page Fault */
+	dsisr = kvmppc_set_field(0, 33, 33, 1);
+	if (is_store)
+		to_book3s(vcpu)->dsisr = kvmppc_set_field(dsisr, 38, 38, 1);
+	kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_DATA_STORAGE);
+}
+
+static int kvmppc_emulate_fpr_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
+				   int rs, ulong addr, int ls_type)
+{
+	int emulated = EMULATE_FAIL;
+	struct thread_struct t;
+	int r;
+	char tmp[8];
+	int len = sizeof(u32);
+
+	if (ls_type == FPU_LS_DOUBLE)
+		len = sizeof(u64);
+
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	/* read from memory */
+	r = kvmppc_ld(vcpu, &addr, len, tmp, true);
+	vcpu->arch.paddr_accessed = addr;
+
+	if (r < 0) {
+		kvmppc_inject_pf(vcpu, addr, false);
+		goto done_load;
+	} else if (r == EMULATE_DO_MMIO) {
+		emulated = kvmppc_handle_load(run, vcpu, KVM_REG_FPR | rs, len, 1);
+		goto done_load;
+	}
+
+	emulated = EMULATE_DONE;
+
+	/* put in registers */
+	switch (ls_type) {
+	case FPU_LS_SINGLE:
+		cvt_fd((float*)tmp, (double*)&vcpu->arch.fpr[rs], &t);
+		vcpu->arch.qpr[rs] = *((u32*)tmp);
+		break;
+	case FPU_LS_DOUBLE:
+		vcpu->arch.fpr[rs] = *((u64*)tmp);
+		break;
+	}
+
+	dprintk(KERN_INFO "KVM: FPR_LD [0x%llx] at 0x%lx (%d)\n", *(u64*)tmp,
+			  addr, len);
+
+done_load:
+	return emulated;
+}
+
+static int kvmppc_emulate_fpr_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
+				    int rs, ulong addr, int ls_type)
+{
+	int emulated = EMULATE_FAIL;
+	struct thread_struct t;
+	int r;
+	char tmp[8];
+	u64 val;
+	int len;
+
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	switch (ls_type) {
+	case FPU_LS_SINGLE:
+		cvt_df((double*)&vcpu->arch.fpr[rs], (float*)tmp, &t);
+		val = *((u32*)tmp);
+		len = sizeof(u32);
+		break;
+	case FPU_LS_SINGLE_LOW:
+		*((u32*)tmp) = vcpu->arch.fpr[rs];
+		val = vcpu->arch.fpr[rs] & 0xffffffff;
+		len = sizeof(u32);
+		break;
+	case FPU_LS_DOUBLE:
+		*((u64*)tmp) = vcpu->arch.fpr[rs];
+		val = vcpu->arch.fpr[rs];
+		len = sizeof(u64);
+		break;
+	default:
+		val = 0;
+		len = 0;
+	}
+
+	r = kvmppc_st(vcpu, &addr, len, tmp, true);
+	vcpu->arch.paddr_accessed = addr;
+	if (r < 0) {
+		kvmppc_inject_pf(vcpu, addr, true);
+	} else if (r == EMULATE_DO_MMIO) {
+		emulated = kvmppc_handle_store(run, vcpu, val, len, 1);
+	} else {
+		emulated = EMULATE_DONE;
+	}
+
+	dprintk(KERN_INFO "KVM: FPR_ST [0x%llx] at 0x%lx (%d)\n",
+			  val, addr, len);
+
+	return emulated;
+}
+
+static int kvmppc_emulate_psq_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
+				   int rs, ulong addr, bool w, int i)
+{
+	int emulated = EMULATE_FAIL;
+	struct thread_struct t;
+	int r;
+	float one = 1.0;
+	u32 tmp[2];
+
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	/* read from memory */
+	if (w) {
+		r = kvmppc_ld(vcpu, &addr, sizeof(u32), tmp, true);
+		memcpy(&tmp[1], &one, sizeof(u32));
+	} else {
+		r = kvmppc_ld(vcpu, &addr, sizeof(u32) * 2, tmp, true);
+	}
+	vcpu->arch.paddr_accessed = addr;
+	if (r < 0) {
+		kvmppc_inject_pf(vcpu, addr, false);
+		goto done_load;
+	} else if ((r == EMULATE_DO_MMIO) && w) {
+		emulated = kvmppc_handle_load(run, vcpu, KVM_REG_FPR | rs, 4, 1);
+		vcpu->arch.qpr[rs] = tmp[1];
+		goto done_load;
+	} else if (r == EMULATE_DO_MMIO) {
+		emulated = kvmppc_handle_load(run, vcpu, KVM_REG_FQPR | rs, 8, 1);
+		goto done_load;
+	}
+
+	emulated = EMULATE_DONE;
+
+	/* put in registers */
+	cvt_fd((float*)&tmp[0], (double*)&vcpu->arch.fpr[rs], &t);
+	vcpu->arch.qpr[rs] = tmp[1];
+
+	dprintk(KERN_INFO "KVM: PSQ_LD [0x%x, 0x%x] at 0x%lx (%d)\n", tmp[0],
+			  tmp[1], addr, w ? 4 : 8);
+
+done_load:
+	return emulated;
+}
+
+static int kvmppc_emulate_psq_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
+				    int rs, ulong addr, bool w, int i)
+{
+	int emulated = EMULATE_FAIL;
+	struct thread_struct t;
+	int r;
+	u32 tmp[2];
+	int len = w ? sizeof(u32) : sizeof(u64);
+
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	cvt_df((double*)&vcpu->arch.fpr[rs], (float*)&tmp[0], &t);
+	tmp[1] = vcpu->arch.qpr[rs];
+
+	r = kvmppc_st(vcpu, &addr, len, tmp, true);
+	vcpu->arch.paddr_accessed = addr;
+	if (r < 0) {
+		kvmppc_inject_pf(vcpu, addr, true);
+	} else if ((r == EMULATE_DO_MMIO) && w) {
+		emulated = kvmppc_handle_store(run, vcpu, tmp[0], 4, 1);
+	} else if (r == EMULATE_DO_MMIO) {
+		u64 val = ((u64)tmp[0] << 32) | tmp[1];
+		emulated = kvmppc_handle_store(run, vcpu, val, 8, 1);
+	} else {
+		emulated = EMULATE_DONE;
+	}
+
+	dprintk(KERN_INFO "KVM: PSQ_ST [0x%x, 0x%x] at 0x%lx (%d)\n",
+			  tmp[0], tmp[1], addr, len);
+
+	return emulated;
+}
+
+/*
+ * Cuts out inst bits with ordering according to spec.
+ * That means the leftmost bit is zero. All given bits are included.
+ */
+static inline u32 inst_get_field(u32 inst, int msb, int lsb)
+{
+	return kvmppc_get_field(inst, msb + 32, lsb + 32);
+}
+
+/*
+ * Replaces inst bits with ordering according to spec.
+ */
+static inline u32 inst_set_field(u32 inst, int msb, int lsb, int value)
+{
+	return kvmppc_set_field(inst, msb + 32, lsb + 32, value);
+}
+
+bool kvmppc_inst_is_paired_single(struct kvm_vcpu *vcpu, u32 inst)
+{
+	if (!(vcpu->arch.hflags & BOOK3S_HFLAG_PAIRED_SINGLE))
+		return false;
+
+	switch (get_op(inst)) {
+	case OP_PSQ_L:
+	case OP_PSQ_LU:
+	case OP_PSQ_ST:
+	case OP_PSQ_STU:
+	case OP_LFS:
+	case OP_LFSU:
+	case OP_LFD:
+	case OP_LFDU:
+	case OP_STFS:
+	case OP_STFSU:
+	case OP_STFD:
+	case OP_STFDU:
+		return true;
+	case 4:
+		/* X form */
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_4X_PS_CMPU0:
+		case OP_4X_PSQ_LX:
+		case OP_4X_PS_CMPO0:
+		case OP_4X_PSQ_LUX:
+		case OP_4X_PS_NEG:
+		case OP_4X_PS_CMPU1:
+		case OP_4X_PS_MR:
+		case OP_4X_PS_CMPO1:
+		case OP_4X_PS_NABS:
+		case OP_4X_PS_ABS:
+		case OP_4X_PS_MERGE00:
+		case OP_4X_PS_MERGE01:
+		case OP_4X_PS_MERGE10:
+		case OP_4X_PS_MERGE11:
+			return true;
+		}
+		/* XW form */
+		switch (inst_get_field(inst, 25, 30)) {
+		case OP_4XW_PSQ_STX:
+		case OP_4XW_PSQ_STUX:
+			return true;
+		}
+		/* A form */
+		switch (inst_get_field(inst, 26, 30)) {
+		case OP_4A_PS_SUM1:
+		case OP_4A_PS_SUM0:
+		case OP_4A_PS_MULS0:
+		case OP_4A_PS_MULS1:
+		case OP_4A_PS_MADDS0:
+		case OP_4A_PS_MADDS1:
+		case OP_4A_PS_DIV:
+		case OP_4A_PS_SUB:
+		case OP_4A_PS_ADD:
+		case OP_4A_PS_SEL:
+		case OP_4A_PS_RES:
+		case OP_4A_PS_MUL:
+		case OP_4A_PS_RSQRTE:
+		case OP_4A_PS_MSUB:
+		case OP_4A_PS_MADD:
+		case OP_4A_PS_NMSUB:
+		case OP_4A_PS_NMADD:
+			return true;
+		}
+		break;
+	case 59:
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_59_FADDS:
+		case OP_59_FSUBS:
+		case OP_59_FDIVS:
+		case OP_59_FRES:
+		case OP_59_FRSQRTES:
+			return true;
+		}
+		switch (inst_get_field(inst, 26, 30)) {
+		case OP_59_FMULS:
+		case OP_59_FMSUBS:
+		case OP_59_FMADDS:
+		case OP_59_FNMSUBS:
+		case OP_59_FNMADDS:
+			return true;
+		}
+		break;
+	case 63:
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_63_MTFSB0:
+		case OP_63_MTFSB1:
+		case OP_63_MTFSF:
+		case OP_63_MTFSFI:
+		case OP_63_MCRFS:
+		case OP_63_MFFS:
+		case OP_63_FCMPU:
+		case OP_63_FCMPO:
+		case OP_63_FNEG:
+		case OP_63_FMR:
+		case OP_63_FABS:
+		case OP_63_FRSP:
+		case OP_63_FDIV:
+		case OP_63_FADD:
+		case OP_63_FSUB:
+		case OP_63_FCTIW:
+		case OP_63_FCTIWZ:
+		case OP_63_FRSQRTE:
+		case OP_63_FCPSGN:
+			return true;
+		}
+		switch (inst_get_field(inst, 26, 30)) {
+		case OP_63_FMUL:
+		case OP_63_FSEL:
+		case OP_63_FMSUB:
+		case OP_63_FMADD:
+		case OP_63_FNMSUB:
+		case OP_63_FNMADD:
+			return true;
+		}
+		break;
+	case 31:
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_31_LFSX:
+		case OP_31_LFSUX:
+		case OP_31_LFDX:
+		case OP_31_LFDUX:
+		case OP_31_STFSX:
+		case OP_31_STFSUX:
+		case OP_31_STFX:
+		case OP_31_STFUX:
+		case OP_31_STFIWX:
+			return true;
+		}
+		break;
+	}
+
+	return false;
+}
+
+static int get_d_signext(u32 inst)
+{
+	int d = inst & 0x8ff;
+
+	if (d & 0x800)
+		return -(d & 0x7ff);
+
+	return (d & 0x7ff);
+}
+
+static int kvmppc_ps_three_in(struct kvm_vcpu *vcpu, bool rc,
+				      int reg_out, int reg_in1, int reg_in2,
+				      int reg_in3, int scalar,
+				      void (*func)(struct thread_struct *t,
+						 u32 *dst, u32 *src1,
+						 u32 *src2, u32 *src3))
+{
+	u32 *qpr = vcpu->arch.qpr;
+	u64 *fpr = vcpu->arch.fpr;
+	u32 ps0_out;
+	u32 ps0_in1, ps0_in2, ps0_in3;
+	u32 ps1_in1, ps1_in2, ps1_in3;
+	struct thread_struct t;
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	/* RC */
+	WARN_ON(rc);
+
+	/* PS0 */
+	cvt_df((double*)&fpr[reg_in1], (float*)&ps0_in1, &t);
+	cvt_df((double*)&fpr[reg_in2], (float*)&ps0_in2, &t);
+	cvt_df((double*)&fpr[reg_in3], (float*)&ps0_in3, &t);
+
+	if (scalar & SCALAR_LOW)
+		ps0_in2 = qpr[reg_in2];
+
+	func(&t, &ps0_out, &ps0_in1, &ps0_in2, &ps0_in3);
+
+	dprintk(KERN_INFO "PS3 ps0 -> f(0x%x, 0x%x, 0x%x) = 0x%x\n",
+			  ps0_in1, ps0_in2, ps0_in3, ps0_out);
+
+	if (!(scalar & SCALAR_NO_PS0))
+		cvt_fd((float*)&ps0_out, (double*)&fpr[reg_out], &t);
+
+	/* PS1 */
+	ps1_in1 = qpr[reg_in1];
+	ps1_in2 = qpr[reg_in2];
+	ps1_in3 = qpr[reg_in3];
+
+	if (scalar & SCALAR_HIGH)
+		ps1_in2 = ps0_in2;
+
+	if (!(scalar & SCALAR_NO_PS1))
+		func(&t, &qpr[reg_out], &ps1_in1, &ps1_in2, &ps1_in3);
+
+	dprintk(KERN_INFO "PS3 ps1 -> f(0x%x, 0x%x, 0x%x) = 0x%x\n",
+			  ps1_in1, ps1_in2, ps1_in3, qpr[reg_out]);
+
+	return EMULATE_DONE;
+}
+
+static int kvmppc_ps_two_in(struct kvm_vcpu *vcpu, bool rc,
+				    int reg_out, int reg_in1, int reg_in2,
+				    int scalar,
+				    void (*func)(struct thread_struct *t,
+						 u32 *dst, u32 *src1,
+						 u32 *src2))
+{
+	u32 *qpr = vcpu->arch.qpr;
+	u64 *fpr = vcpu->arch.fpr;
+	u32 ps0_out;
+	u32 ps0_in1, ps0_in2;
+	u32 ps1_out;
+	u32 ps1_in1, ps1_in2;
+	struct thread_struct t;
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	/* RC */
+	WARN_ON(rc);
+
+	/* PS0 */
+	cvt_df((double*)&fpr[reg_in1], (float*)&ps0_in1, &t);
+
+	if (scalar & SCALAR_LOW)
+		ps0_in2 = qpr[reg_in2];
+	else
+		cvt_df((double*)&fpr[reg_in2], (float*)&ps0_in2, &t);
+
+	func(&t, &ps0_out, &ps0_in1, &ps0_in2);
+
+	if (!(scalar & SCALAR_NO_PS0)) {
+		dprintk(KERN_INFO "PS2 ps0 -> f(0x%x, 0x%x) = 0x%x\n",
+				  ps0_in1, ps0_in2, ps0_out);
+
+		cvt_fd((float*)&ps0_out, (double*)&fpr[reg_out], &t);
+	}
+
+	/* PS1 */
+	ps1_in1 = qpr[reg_in1];
+	ps1_in2 = qpr[reg_in2];
+
+	if (scalar & SCALAR_HIGH)
+		ps1_in2 = ps0_in2;
+
+	func(&t, &ps1_out, &ps1_in1, &ps1_in2);
+
+	if (!(scalar & SCALAR_NO_PS1)) {
+		qpr[reg_out] = ps1_out;
+
+		dprintk(KERN_INFO "PS2 ps1 -> f(0x%x, 0x%x) = 0x%x\n",
+				  ps1_in1, ps1_in2, qpr[reg_out]);
+	}
+
+	return EMULATE_DONE;
+}
+
+static int kvmppc_ps_one_in(struct kvm_vcpu *vcpu, bool rc,
+				    int reg_out, int reg_in,
+				    void (*func)(struct thread_struct *t,
+						 u32 *dst, u32 *src1))
+{
+	u32 *qpr = vcpu->arch.qpr;
+	u64 *fpr = vcpu->arch.fpr;
+	u32 ps0_out, ps0_in;
+	u32 ps1_in;
+	struct thread_struct t;
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	/* RC */
+	WARN_ON(rc);
+
+	/* PS0 */
+	cvt_df((double*)&fpr[reg_in], (float*)&ps0_in, &t);
+	func(&t, &ps0_out, &ps0_in);
+
+	dprintk(KERN_INFO "PS1 ps0 -> f(0x%x) = 0x%x\n",
+			  ps0_in, ps0_out);
+
+	cvt_fd((float*)&ps0_out, (double*)&fpr[reg_out], &t);
+
+	/* PS1 */
+	ps1_in = qpr[reg_in];
+	func(&t, &qpr[reg_out], &ps1_in);
+
+	dprintk(KERN_INFO "PS1 ps1 -> f(0x%x) = 0x%x\n",
+			  ps1_in, qpr[reg_out]);
+
+	return EMULATE_DONE;
+}
+
+int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu)
+{
+	u32 inst = kvmppc_get_last_inst(vcpu);
+	enum emulation_result emulated = EMULATE_DONE;
+
+	int ax_rd = inst_get_field(inst, 6, 10);
+	int ax_ra = inst_get_field(inst, 11, 15);
+	int ax_rb = inst_get_field(inst, 16, 20);
+	int ax_rc = inst_get_field(inst, 21, 25);
+	short full_d = inst_get_field(inst, 16, 31);
+
+	u64 *fpr_d = &vcpu->arch.fpr[ax_rd];
+	u64 *fpr_a = &vcpu->arch.fpr[ax_ra];
+	u64 *fpr_b = &vcpu->arch.fpr[ax_rb];
+	u64 *fpr_c = &vcpu->arch.fpr[ax_rc];
+
+	bool rcomp = (inst & 1) ? true : false;
+	u32 cr = kvmppc_get_cr(vcpu);
+	struct thread_struct t;
+#ifdef DEBUG
+	int i;
+#endif
+
+	t.fpscr.val = vcpu->arch.fpscr;
+
+	if (!kvmppc_inst_is_paired_single(vcpu, inst))
+		return EMULATE_FAIL;
+
+	if (!(vcpu->arch.msr & MSR_FP)) {
+		kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_FP_UNAVAIL);
+		return EMULATE_AGAIN;
+	}
+
+	kvmppc_giveup_ext(vcpu, MSR_FP);
+	preempt_disable();
+	enable_kernel_fp();
+	/* Do we need to clear FE0 / FE1 here? Don't think so. */
+
+#ifdef DEBUG
+	for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++) {
+		u32 f;
+		cvt_df((double*)&vcpu->arch.fpr[i], (float*)&f, &t);
+		dprintk(KERN_INFO "FPR[%d] = 0x%x / 0x%llx    QPR[%d] = 0x%x\n",
+			i, f, vcpu->arch.fpr[i], i, vcpu->arch.qpr[i]);
+	}
+#endif
+
+	switch (get_op(inst)) {
+	case OP_PSQ_L:
+	{
+		ulong addr = ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0;
+		bool w = inst_get_field(inst, 16, 16) ? true : false;
+		int i = inst_get_field(inst, 17, 19);
+
+		addr += get_d_signext(inst);
+		emulated = kvmppc_emulate_psq_load(run, vcpu, ax_rd, addr, w, i);
+		break;
+	}
+	case OP_PSQ_LU:
+	{
+		ulong addr = kvmppc_get_gpr(vcpu, ax_ra);
+		bool w = inst_get_field(inst, 16, 16) ? true : false;
+		int i = inst_get_field(inst, 17, 19);
+
+		addr += get_d_signext(inst);
+		emulated = kvmppc_emulate_psq_load(run, vcpu, ax_rd, addr, w, i);
+
+		if (emulated == EMULATE_DONE)
+			kvmppc_set_gpr(vcpu, ax_ra, addr);
+		break;
+	}
+	case OP_PSQ_ST:
+	{
+		ulong addr = ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0;
+		bool w = inst_get_field(inst, 16, 16) ? true : false;
+		int i = inst_get_field(inst, 17, 19);
+
+		addr += get_d_signext(inst);
+		emulated = kvmppc_emulate_psq_store(run, vcpu, ax_rd, addr, w, i);
+		break;
+	}
+	case OP_PSQ_STU:
+	{
+		ulong addr = kvmppc_get_gpr(vcpu, ax_ra);
+		bool w = inst_get_field(inst, 16, 16) ? true : false;
+		int i = inst_get_field(inst, 17, 19);
+
+		addr += get_d_signext(inst);
+		emulated = kvmppc_emulate_psq_store(run, vcpu, ax_rd, addr, w, i);
+
+		if (emulated == EMULATE_DONE)
+			kvmppc_set_gpr(vcpu, ax_ra, addr);
+		break;
+	}
+	case 4:
+		/* X form */
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_4X_PS_CMPU0:
+			/* XXX */
+			emulated = EMULATE_FAIL;
+			break;
+		case OP_4X_PSQ_LX:
+		{
+			ulong addr = ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0;
+			bool w = inst_get_field(inst, 21, 21) ? true : false;
+			int i = inst_get_field(inst, 22, 24);
+
+			addr += kvmppc_get_gpr(vcpu, ax_rb);
+			emulated = kvmppc_emulate_psq_load(run, vcpu, ax_rd, addr, w, i);
+			break;
+		}
+		case OP_4X_PS_CMPO0:
+			/* XXX */
+			emulated = EMULATE_FAIL;
+			break;
+		case OP_4X_PSQ_LUX:
+		{
+			ulong addr = kvmppc_get_gpr(vcpu, ax_ra);
+			bool w = inst_get_field(inst, 21, 21) ? true : false;
+			int i = inst_get_field(inst, 22, 24);
+
+			addr += kvmppc_get_gpr(vcpu, ax_rb);
+			emulated = kvmppc_emulate_psq_load(run, vcpu, ax_rd, addr, w, i);
+
+			if (emulated == EMULATE_DONE)
+				kvmppc_set_gpr(vcpu, ax_ra, addr);
+			break;
+		}
+		case OP_4X_PS_NEG:
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_rb];
+			vcpu->arch.fpr[ax_rd] ^= 0x8000000000000000ULL;
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
+			vcpu->arch.qpr[ax_rd] ^= 0x80000000;
+			break;
+		case OP_4X_PS_CMPU1:
+			/* XXX */
+			emulated = EMULATE_FAIL;
+			break;
+		case OP_4X_PS_MR:
+			WARN_ON(rcomp);
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_rb];
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
+			break;
+		case OP_4X_PS_CMPO1:
+			/* XXX */
+			emulated = EMULATE_FAIL;
+			break;
+		case OP_4X_PS_NABS:
+			WARN_ON(rcomp);
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_rb];
+			vcpu->arch.fpr[ax_rd] |= 0x8000000000000000ULL;
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
+			vcpu->arch.qpr[ax_rd] |= 0x80000000;
+			break;
+		case OP_4X_PS_ABS:
+			WARN_ON(rcomp);
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_rb];
+			vcpu->arch.fpr[ax_rd] &= ~0x8000000000000000ULL;
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
+			vcpu->arch.qpr[ax_rd] &= ~0x80000000;
+			break;
+		case OP_4X_PS_MERGE00:
+			WARN_ON(rcomp);
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_ra];
+			/* vcpu->arch.qpr[ax_rd] = vcpu->arch.fpr[ax_rb]; */
+			cvt_df((double*)&vcpu->arch.fpr[ax_rb],
+			       (float*)&vcpu->arch.qpr[ax_rd], &t);
+			break;
+		case OP_4X_PS_MERGE01:
+			WARN_ON(rcomp);
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_ra];
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
+			break;
+		case OP_4X_PS_MERGE10:
+			WARN_ON(rcomp);
+			/* vcpu->arch.fpr[ax_rd] = vcpu->arch.qpr[ax_ra]; */
+			cvt_fd((float*)&vcpu->arch.qpr[ax_ra],
+			       (double*)&vcpu->arch.fpr[ax_rd], &t);
+			/* vcpu->arch.qpr[ax_rd] = vcpu->arch.fpr[ax_rb]; */
+			cvt_df((double*)&vcpu->arch.fpr[ax_rb],
+			       (float*)&vcpu->arch.qpr[ax_rd], &t);
+			break;
+		case OP_4X_PS_MERGE11:
+			WARN_ON(rcomp);
+			/* vcpu->arch.fpr[ax_rd] = vcpu->arch.qpr[ax_ra]; */
+			cvt_fd((float*)&vcpu->arch.qpr[ax_ra],
+			       (double*)&vcpu->arch.fpr[ax_rd], &t);
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rb];
+			break;
+		}
+		/* XW form */
+		switch (inst_get_field(inst, 25, 30)) {
+		case OP_4XW_PSQ_STX:
+		{
+			ulong addr = ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0;
+			bool w = inst_get_field(inst, 21, 21) ? true : false;
+			int i = inst_get_field(inst, 22, 24);
+
+			addr += kvmppc_get_gpr(vcpu, ax_rb);
+			emulated = kvmppc_emulate_psq_store(run, vcpu, ax_rd, addr, w, i);
+			break;
+		}
+		case OP_4XW_PSQ_STUX:
+		{
+			ulong addr = kvmppc_get_gpr(vcpu, ax_ra);
+			bool w = inst_get_field(inst, 21, 21) ? true : false;
+			int i = inst_get_field(inst, 22, 24);
+
+			addr += kvmppc_get_gpr(vcpu, ax_rb);
+			emulated = kvmppc_emulate_psq_store(run, vcpu, ax_rd, addr, w, i);
+
+			if (emulated == EMULATE_DONE)
+				kvmppc_set_gpr(vcpu, ax_ra, addr);
+			break;
+		}
+		}
+		/* A form */
+		switch (inst_get_field(inst, 26, 30)) {
+		case OP_4A_PS_SUM1:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_rb, ax_ra, SCALAR_NO_PS0 | SCALAR_HIGH, fps_fadds);
+			vcpu->arch.fpr[ax_rd] = vcpu->arch.fpr[ax_rc];
+			break;
+		case OP_4A_PS_SUM0:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rb, SCALAR_NO_PS1 | SCALAR_LOW, fps_fadds);
+			vcpu->arch.qpr[ax_rd] = vcpu->arch.qpr[ax_rc];
+			break;
+		case OP_4A_PS_MULS0:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, SCALAR_HIGH, fps_fmuls);
+			break;
+		case OP_4A_PS_MULS1:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, SCALAR_LOW, fps_fmuls);
+			break;
+		case OP_4A_PS_MADDS0:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_HIGH, fps_fmadds);
+			break;
+		case OP_4A_PS_MADDS1:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_LOW, fps_fmadds);
+			break;
+		case OP_4A_PS_DIV:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rb, SCALAR_NONE, fps_fdivs);
+			break;
+		case OP_4A_PS_SUB:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rb, SCALAR_NONE, fps_fsubs);
+			break;
+		case OP_4A_PS_ADD:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rb, SCALAR_NONE, fps_fadds);
+			break;
+		case OP_4A_PS_SEL:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_NONE, fps_fsel);
+			break;
+		case OP_4A_PS_RES:
+			emulated = kvmppc_ps_one_in(vcpu, rcomp, ax_rd,
+					ax_rb, fps_fres);
+			break;
+		case OP_4A_PS_MUL:
+			emulated = kvmppc_ps_two_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, SCALAR_NONE, fps_fmuls);
+			break;
+		case OP_4A_PS_RSQRTE:
+			emulated = kvmppc_ps_one_in(vcpu, rcomp, ax_rd,
+					ax_rb, fps_frsqrte);
+			break;
+		case OP_4A_PS_MSUB:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_NONE, fps_fmsubs);
+			break;
+		case OP_4A_PS_MADD:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_NONE, fps_fmadds);
+			break;
+		case OP_4A_PS_NMSUB:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_NONE, fps_fnmsubs);
+			break;
+		case OP_4A_PS_NMADD:
+			emulated = kvmppc_ps_three_in(vcpu, rcomp, ax_rd,
+					ax_ra, ax_rc, ax_rb, SCALAR_NONE, fps_fnmadds);
+			break;
+		}
+		break;
+
+	/* Real FPU operations */
+
+	case OP_LFS:
+	{
+		ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) + full_d;
+
+		emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd, addr,
+						   FPU_LS_SINGLE);
+		break;
+	}
+	case OP_LFSU:
+	{
+		ulong addr = kvmppc_get_gpr(vcpu, ax_ra) + full_d;
+
+		emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd, addr,
+						   FPU_LS_SINGLE);
+
+		if (emulated == EMULATE_DONE)
+			kvmppc_set_gpr(vcpu, ax_ra, addr);
+		break;
+	}
+	case OP_LFD:
+	{
+		ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) + full_d;
+
+		emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd, addr,
+						   FPU_LS_DOUBLE);
+		break;
+	}
+	case OP_LFDU:
+	{
+		ulong addr = kvmppc_get_gpr(vcpu, ax_ra) + full_d;
+
+		emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd, addr,
+						   FPU_LS_DOUBLE);
+
+		if (emulated == EMULATE_DONE)
+			kvmppc_set_gpr(vcpu, ax_ra, addr);
+		break;
+	}
+	case OP_STFS:
+	{
+		ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) + full_d;
+
+		emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd, addr,
+						    FPU_LS_SINGLE);
+		break;
+	}
+	case OP_STFSU:
+	{
+		ulong addr = kvmppc_get_gpr(vcpu, ax_ra) + full_d;
+
+		emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd, addr,
+						    FPU_LS_SINGLE);
+
+		if (emulated == EMULATE_DONE)
+			kvmppc_set_gpr(vcpu, ax_ra, addr);
+		break;
+	}
+	case OP_STFD:
+	{
+		ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) + full_d;
+
+		emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd, addr,
+						    FPU_LS_DOUBLE);
+		break;
+	}
+	case OP_STFDU:
+	{
+		ulong addr = kvmppc_get_gpr(vcpu, ax_ra) + full_d;
+
+		emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd, addr,
+						    FPU_LS_DOUBLE);
+
+		if (emulated == EMULATE_DONE)
+			kvmppc_set_gpr(vcpu, ax_ra, addr);
+		break;
+	}
+	case 31:
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_31_LFSX:
+		{
+			ulong addr = ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0;
+
+			addr += kvmppc_get_gpr(vcpu, ax_rb);
+			emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd,
+							   addr, FPU_LS_SINGLE);
+			break;
+		}
+		case OP_31_LFSUX:
+		{
+			ulong addr = kvmppc_get_gpr(vcpu, ax_ra) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd,
+							   addr, FPU_LS_SINGLE);
+
+			if (emulated == EMULATE_DONE)
+				kvmppc_set_gpr(vcpu, ax_ra, addr);
+			break;
+		}
+		case OP_31_LFDX:
+		{
+			ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd,
+							   addr, FPU_LS_DOUBLE);
+			break;
+		}
+		case OP_31_LFDUX:
+		{
+			ulong addr = kvmppc_get_gpr(vcpu, ax_ra) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_load(run, vcpu, ax_rd,
+							   addr, FPU_LS_DOUBLE);
+
+			if (emulated == EMULATE_DONE)
+				kvmppc_set_gpr(vcpu, ax_ra, addr);
+			break;
+		}
+		case OP_31_STFSX:
+		{
+			ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd,
+							    addr, FPU_LS_SINGLE);
+			break;
+		}
+		case OP_31_STFSUX:
+		{
+			ulong addr = kvmppc_get_gpr(vcpu, ax_ra) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd,
+							    addr, FPU_LS_SINGLE);
+
+			if (emulated == EMULATE_DONE)
+				kvmppc_set_gpr(vcpu, ax_ra, addr);
+			break;
+		}
+		case OP_31_STFX:
+		{
+			ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd,
+							    addr, FPU_LS_DOUBLE);
+			break;
+		}
+		case OP_31_STFUX:
+		{
+			ulong addr = kvmppc_get_gpr(vcpu, ax_ra) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd,
+							    addr, FPU_LS_DOUBLE);
+
+			if (emulated == EMULATE_DONE)
+				kvmppc_set_gpr(vcpu, ax_ra, addr);
+			break;
+		}
+		case OP_31_STFIWX:
+		{
+			ulong addr = (ax_ra ? kvmppc_get_gpr(vcpu, ax_ra) : 0) +
+				     kvmppc_get_gpr(vcpu, ax_rb);
+
+			emulated = kvmppc_emulate_fpr_store(run, vcpu, ax_rd,
+							    addr,
+							    FPU_LS_SINGLE_LOW);
+			break;
+		}
+			break;
+		}
+		break;
+	case 59:
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_59_FADDS:
+			fpd_fadds(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FSUBS:
+			fpd_fsubs(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FDIVS:
+			fpd_fdivs(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FRES:
+			fpd_fres(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FRSQRTES:
+			fpd_frsqrtes(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		}
+		switch (inst_get_field(inst, 26, 30)) {
+		case OP_59_FMULS:
+			fpd_fmuls(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FMSUBS:
+			fpd_fmsubs(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FMADDS:
+			fpd_fmadds(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FNMSUBS:
+			fpd_fnmsubs(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_59_FNMADDS:
+			fpd_fnmadds(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		}
+		break;
+	case 63:
+		switch (inst_get_field(inst, 21, 30)) {
+		case OP_63_MTFSB0:
+		case OP_63_MTFSB1:
+		case OP_63_MCRFS:
+		case OP_63_MTFSFI:
+			/* XXX need to implement */
+			break;
+		case OP_63_MFFS:
+			/* XXX missing CR */
+			*fpr_d = vcpu->arch.fpscr;
+			break;
+		case OP_63_MTFSF:
+			/* XXX missing fm bits */
+			/* XXX missing CR */
+			vcpu->arch.fpscr = *fpr_b;
+			break;
+		case OP_63_FCMPU:
+		{
+			u32 tmp_cr;
+			u32 cr0_mask = 0xf0000000;
+			u32 cr_shift = inst_get_field(inst, 6, 8) * 4;
+
+			fpd_fcmpu(&vcpu->arch.fpscr, &tmp_cr, fpr_a, fpr_b);
+			cr &= ~(cr0_mask >> cr_shift);
+			cr |= (cr & cr0_mask) >> cr_shift;
+			break;
+		}
+		case OP_63_FCMPO:
+		{
+			u32 tmp_cr;
+			u32 cr0_mask = 0xf0000000;
+			u32 cr_shift = inst_get_field(inst, 6, 8) * 4;
+
+			fpd_fcmpo(&vcpu->arch.fpscr, &tmp_cr, fpr_a, fpr_b);
+			cr &= ~(cr0_mask >> cr_shift);
+			cr |= (cr & cr0_mask) >> cr_shift;
+			break;
+		}
+		case OP_63_FNEG:
+			fpd_fneg(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			break;
+		case OP_63_FMR:
+			*fpr_d = *fpr_b;
+			break;
+		case OP_63_FABS:
+			fpd_fabs(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			break;
+		case OP_63_FCPSGN:
+			fpd_fcpsgn(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			break;
+		case OP_63_FDIV:
+			fpd_fdiv(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			break;
+		case OP_63_FADD:
+			fpd_fadd(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			break;
+		case OP_63_FSUB:
+			fpd_fsub(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_b);
+			break;
+		case OP_63_FCTIW:
+			fpd_fctiw(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			break;
+		case OP_63_FCTIWZ:
+			fpd_fctiwz(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			break;
+		case OP_63_FRSP:
+			fpd_frsp(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			kvmppc_sync_qpr(vcpu, ax_rd);
+			break;
+		case OP_63_FRSQRTE:
+		{
+			double one = 1.0f;
+
+			/* fD = sqrt(fB) */
+			fpd_fsqrt(&vcpu->arch.fpscr, &cr, fpr_d, fpr_b);
+			/* fD = 1.0f / fD */
+			fpd_fdiv(&vcpu->arch.fpscr, &cr, fpr_d, (u64*)&one, fpr_d);
+			break;
+		}
+		}
+		switch (inst_get_field(inst, 26, 30)) {
+		case OP_63_FMUL:
+			fpd_fmul(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c);
+			break;
+		case OP_63_FSEL:
+			fpd_fsel(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			break;
+		case OP_63_FMSUB:
+			fpd_fmsub(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			break;
+		case OP_63_FMADD:
+			fpd_fmadd(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			break;
+		case OP_63_FNMSUB:
+			fpd_fnmsub(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			break;
+		case OP_63_FNMADD:
+			fpd_fnmadd(&vcpu->arch.fpscr, &cr, fpr_d, fpr_a, fpr_c, fpr_b);
+			break;
+		}
+		break;
+	}
+
+#ifdef DEBUG
+	for (i = 0; i < ARRAY_SIZE(vcpu->arch.fpr); i++) {
+		u32 f;
+		cvt_df((double*)&vcpu->arch.fpr[i], (float*)&f, &t);
+		dprintk(KERN_INFO "FPR[%d] = 0x%x\n", i, f);
+	}
+#endif
+
+	if (rcomp)
+		kvmppc_set_cr(vcpu, cr);
+
+	preempt_enable();
+
+	return emulated;
+}
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_rmhandlers.S linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_rmhandlers.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_rmhandlers.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_rmhandlers.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,251 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/kvm_asm.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+
+#ifdef CONFIG_PPC_BOOK3S_64
+#include <asm/exception-64s.h>
+#endif
+
+/*****************************************************************************
+ *                                                                           *
+ *        Real Mode handlers that need to be in low physical memory          *
+ *                                                                           *
+ ****************************************************************************/
+
+#if defined(CONFIG_PPC_BOOK3S_64)
+
+#define LOAD_SHADOW_VCPU(reg)				\
+	mfspr	reg, SPRN_SPRG_PACA
+
+#define SHADOW_VCPU_OFF		PACA_KVM_SVCPU
+#define MSR_NOIRQ		MSR_KERNEL & ~(MSR_IR | MSR_DR)
+#define FUNC(name) 		GLUE(.,name)
+
+#elif defined(CONFIG_PPC_BOOK3S_32)
+
+#define LOAD_SHADOW_VCPU(reg)						\
+	mfspr	reg, SPRN_SPRG_THREAD;					\
+	lwz	reg, THREAD_KVM_SVCPU(reg);				\
+	/* PPC32 can have a NULL pointer - let's check for that */	\
+	mtspr   SPRN_SPRG_SCRATCH1, r12;	/* Save r12 */		\
+	mfcr	r12;							\
+	cmpwi	reg, 0;							\
+	bne	1f;							\
+	mfspr	reg, SPRN_SPRG_SCRATCH0;				\
+	mtcr	r12;							\
+	mfspr	r12, SPRN_SPRG_SCRATCH1;				\
+	b	kvmppc_resume_\intno;					\
+1:;									\
+	mtcr	r12;							\
+	mfspr	r12, SPRN_SPRG_SCRATCH1;				\
+	tophys(reg, reg)
+
+#define SHADOW_VCPU_OFF		0
+#define MSR_NOIRQ		MSR_KERNEL
+#define FUNC(name)		name
+
+#endif
+
+.macro INTERRUPT_TRAMPOLINE intno
+
+.global kvmppc_trampoline_\intno
+kvmppc_trampoline_\intno:
+
+	mtspr	SPRN_SPRG_SCRATCH0, r13		/* Save r13 */
+
+	/*
+	 * First thing to do is to find out if we're coming
+	 * from a KVM guest or a Linux process.
+	 *
+	 * To distinguish, we check a magic byte in the PACA/current
+	 */
+	LOAD_SHADOW_VCPU(r13)
+	PPC_STL	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
+	mfcr	r12
+	stw	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
+	lbz	r12, (SHADOW_VCPU_OFF + SVCPU_IN_GUEST)(r13)
+	cmpwi	r12, KVM_GUEST_MODE_NONE
+	bne	..kvmppc_handler_hasmagic_\intno
+	/* No KVM guest? Then jump back to the Linux handler! */
+	lwz	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
+	mtcr	r12
+	PPC_LL	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
+	mfspr	r13, SPRN_SPRG_SCRATCH0		/* r13 = original r13 */
+	b	kvmppc_resume_\intno		/* Get back original handler */
+
+	/* Now we know we're handling a KVM guest */
+..kvmppc_handler_hasmagic_\intno:
+
+	/* Should we just skip the faulting instruction? */
+	cmpwi	r12, KVM_GUEST_MODE_SKIP
+	beq	kvmppc_handler_skip_ins
+
+	/* Let's store which interrupt we're handling */
+	li	r12, \intno
+
+	/* Jump into the SLB exit code that goes to the highmem handler */
+	b	kvmppc_handler_trampoline_exit
+
+.endm
+
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_SYSTEM_RESET
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_MACHINE_CHECK
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DATA_STORAGE
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_INST_STORAGE
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_EXTERNAL
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_ALIGNMENT
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_PROGRAM
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_FP_UNAVAIL
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DECREMENTER
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_SYSCALL
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_TRACE
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_PERFMON
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_ALTIVEC
+
+/* Those are only available on 64 bit machines */
+
+#ifdef CONFIG_PPC_BOOK3S_64
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_DATA_SEGMENT
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_INST_SEGMENT
+INTERRUPT_TRAMPOLINE	BOOK3S_INTERRUPT_VSX
+#endif
+
+/*
+ * Bring us back to the faulting code, but skip the
+ * faulting instruction.
+ *
+ * This is a generic exit path from the interrupt
+ * trampolines above.
+ *
+ * Input Registers:
+ *
+ * R12            = free
+ * R13            = Shadow VCPU (PACA)
+ * SVCPU.SCRATCH0 = guest R12
+ * SVCPU.SCRATCH1 = guest CR
+ * SPRG_SCRATCH0  = guest R13
+ *
+ */
+kvmppc_handler_skip_ins:
+
+	/* Patch the IP to the next instruction */
+	mfsrr0	r12
+	addi	r12, r12, 4
+	mtsrr0	r12
+
+	/* Clean up all state */
+	lwz	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
+	mtcr	r12
+	PPC_LL	r12, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
+	mfspr	r13, SPRN_SPRG_SCRATCH0
+
+	/* And get back into the code */
+	RFI
+
+/*
+ * This trampoline brings us back to a real mode handler
+ *
+ * Input Registers:
+ *
+ * R5 = SRR0
+ * R6 = SRR1
+ * LR = real-mode IP
+ *
+ */
+.global kvmppc_handler_lowmem_trampoline
+kvmppc_handler_lowmem_trampoline:
+
+	mtsrr0	r5
+	mtsrr1	r6
+	blr
+kvmppc_handler_lowmem_trampoline_end:
+
+/*
+ * Call a function in real mode
+ *
+ * Input Registers:
+ *
+ * R3 = function
+ * R4 = MSR
+ * R5 = scratch register
+ *
+ */
+_GLOBAL(kvmppc_rmcall)
+	LOAD_REG_IMMEDIATE(r5, MSR_NOIRQ)
+	mtmsr	r5		/* Disable relocation and interrupts, so mtsrr
+				   doesn't get interrupted */
+	sync
+	mtsrr0	r3
+	mtsrr1	r4
+	RFI
+
+#if defined(CONFIG_PPC_BOOK3S_32)
+#define STACK_LR	INT_FRAME_SIZE+4
+#elif defined(CONFIG_PPC_BOOK3S_64)
+#define STACK_LR	_LINK
+#endif
+
+/*
+ * Activate current's external feature (FPU/Altivec/VSX)
+ */
+#define define_load_up(what) 					\
+								\
+_GLOBAL(kvmppc_load_up_ ## what);				\
+	PPC_STLU r1, -INT_FRAME_SIZE(r1);			\
+	mflr	r3;						\
+	PPC_STL	r3, STACK_LR(r1);				\
+	PPC_STL	r20, _NIP(r1);					\
+	mfmsr	r20;						\
+	LOAD_REG_IMMEDIATE(r3, MSR_DR|MSR_EE);			\
+	andc	r3,r20,r3;		/* Disable DR,EE */	\
+	mtmsr	r3;						\
+	sync;							\
+								\
+	bl	FUNC(load_up_ ## what);				\
+								\
+	mtmsr	r20;			/* Enable DR,EE */	\
+	sync;							\
+	PPC_LL	r3, STACK_LR(r1);				\
+	PPC_LL	r20, _NIP(r1);					\
+	mtlr	r3;						\
+	addi	r1, r1, INT_FRAME_SIZE;				\
+	blr
+
+define_load_up(fpu)
+#ifdef CONFIG_ALTIVEC
+define_load_up(altivec)
+#endif
+#ifdef CONFIG_VSX
+define_load_up(vsx)
+#endif
+
+.global kvmppc_trampoline_lowmem
+kvmppc_trampoline_lowmem:
+	.long kvmppc_handler_lowmem_trampoline - CONFIG_KERNEL_START
+
+.global kvmppc_trampoline_enter
+kvmppc_trampoline_enter:
+	.long kvmppc_handler_trampoline_enter - CONFIG_KERNEL_START
+
+#include "book3s_segment.S"
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_segment.S linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_segment.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/book3s_segment.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/book3s_segment.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,259 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2010
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+/* Real mode helpers */
+
+#if defined(CONFIG_PPC_BOOK3S_64)
+
+#define GET_SHADOW_VCPU(reg)    \
+	addi    reg, r13, PACA_KVM_SVCPU
+
+#elif defined(CONFIG_PPC_BOOK3S_32)
+
+#define GET_SHADOW_VCPU(reg)    			\
+	tophys(reg, r2);       			\
+	lwz     reg, (THREAD + THREAD_KVM_SVCPU)(reg);	\
+	tophys(reg, reg)
+
+#endif
+
+/* Disable for nested KVM */
+#define USE_QUICK_LAST_INST
+
+
+/* Get helper functions for subarch specific functionality */
+
+#if defined(CONFIG_PPC_BOOK3S_64)
+#include "book3s_64_slb.S"
+#elif defined(CONFIG_PPC_BOOK3S_32)
+#include "book3s_32_sr.S"
+#endif
+
+/******************************************************************************
+ *                                                                            *
+ *                               Entry code                                   *
+ *                                                                            *
+ *****************************************************************************/
+
+.global kvmppc_handler_trampoline_enter
+kvmppc_handler_trampoline_enter:
+
+	/* Required state:
+	 *
+	 * MSR = ~IR|DR
+	 * R13 = PACA
+	 * R1 = host R1
+	 * R2 = host R2
+	 * R10 = guest MSR
+	 * all other volatile GPRS = free
+	 * SVCPU[CR] = guest CR
+	 * SVCPU[XER] = guest XER
+	 * SVCPU[CTR] = guest CTR
+	 * SVCPU[LR] = guest LR
+	 */
+
+	/* r3 = shadow vcpu */
+	GET_SHADOW_VCPU(r3)
+
+	/* Move SRR0 and SRR1 into the respective regs */
+	PPC_LL  r9, SVCPU_PC(r3)
+	mtsrr0	r9
+	mtsrr1	r10
+
+	/* Activate guest mode, so faults get handled by KVM */
+	li	r11, KVM_GUEST_MODE_GUEST
+	stb	r11, SVCPU_IN_GUEST(r3)
+
+	/* Switch to guest segment. This is subarch specific. */
+	LOAD_GUEST_SEGMENTS
+
+	/* Enter guest */
+
+	PPC_LL	r4, (SVCPU_CTR)(r3)
+	PPC_LL	r5, (SVCPU_LR)(r3)
+	lwz	r6, (SVCPU_CR)(r3)
+	lwz	r7, (SVCPU_XER)(r3)
+
+	mtctr	r4
+	mtlr	r5
+	mtcr	r6
+	mtxer	r7
+
+	PPC_LL	r0, (SVCPU_R0)(r3)
+	PPC_LL	r1, (SVCPU_R1)(r3)
+	PPC_LL	r2, (SVCPU_R2)(r3)
+	PPC_LL	r4, (SVCPU_R4)(r3)
+	PPC_LL	r5, (SVCPU_R5)(r3)
+	PPC_LL	r6, (SVCPU_R6)(r3)
+	PPC_LL	r7, (SVCPU_R7)(r3)
+	PPC_LL	r8, (SVCPU_R8)(r3)
+	PPC_LL	r9, (SVCPU_R9)(r3)
+	PPC_LL	r10, (SVCPU_R10)(r3)
+	PPC_LL	r11, (SVCPU_R11)(r3)
+	PPC_LL	r12, (SVCPU_R12)(r3)
+	PPC_LL	r13, (SVCPU_R13)(r3)
+
+	PPC_LL	r3, (SVCPU_R3)(r3)
+
+	RFI
+kvmppc_handler_trampoline_enter_end:
+
+
+
+/******************************************************************************
+ *                                                                            *
+ *                               Exit code                                    *
+ *                                                                            *
+ *****************************************************************************/
+
+.global kvmppc_handler_trampoline_exit
+kvmppc_handler_trampoline_exit:
+
+	/* Register usage at this point:
+	 *
+	 * SPRG_SCRATCH0  = guest R13
+	 * R12            = exit handler id
+	 * R13            = shadow vcpu - SHADOW_VCPU_OFF [=PACA on PPC64]
+	 * SVCPU.SCRATCH0 = guest R12
+	 * SVCPU.SCRATCH1 = guest CR
+	 *
+	 */
+
+	/* Save registers */
+
+	PPC_STL	r0, (SHADOW_VCPU_OFF + SVCPU_R0)(r13)
+	PPC_STL	r1, (SHADOW_VCPU_OFF + SVCPU_R1)(r13)
+	PPC_STL	r2, (SHADOW_VCPU_OFF + SVCPU_R2)(r13)
+	PPC_STL	r3, (SHADOW_VCPU_OFF + SVCPU_R3)(r13)
+	PPC_STL	r4, (SHADOW_VCPU_OFF + SVCPU_R4)(r13)
+	PPC_STL	r5, (SHADOW_VCPU_OFF + SVCPU_R5)(r13)
+	PPC_STL	r6, (SHADOW_VCPU_OFF + SVCPU_R6)(r13)
+	PPC_STL	r7, (SHADOW_VCPU_OFF + SVCPU_R7)(r13)
+	PPC_STL	r8, (SHADOW_VCPU_OFF + SVCPU_R8)(r13)
+	PPC_STL	r9, (SHADOW_VCPU_OFF + SVCPU_R9)(r13)
+	PPC_STL	r10, (SHADOW_VCPU_OFF + SVCPU_R10)(r13)
+	PPC_STL	r11, (SHADOW_VCPU_OFF + SVCPU_R11)(r13)
+
+	/* Restore R1/R2 so we can handle faults */
+	PPC_LL	r1, (SHADOW_VCPU_OFF + SVCPU_HOST_R1)(r13)
+	PPC_LL	r2, (SHADOW_VCPU_OFF + SVCPU_HOST_R2)(r13)
+
+	/* Save guest PC and MSR */
+	mfsrr0	r3
+	mfsrr1	r4
+
+	PPC_STL	r3, (SHADOW_VCPU_OFF + SVCPU_PC)(r13)
+	PPC_STL	r4, (SHADOW_VCPU_OFF + SVCPU_SHADOW_SRR1)(r13)
+
+	/* Get scratch'ed off registers */
+	mfspr	r9, SPRN_SPRG_SCRATCH0
+	PPC_LL	r8, (SHADOW_VCPU_OFF + SVCPU_SCRATCH0)(r13)
+	lwz	r7, (SHADOW_VCPU_OFF + SVCPU_SCRATCH1)(r13)
+
+	PPC_STL	r9, (SHADOW_VCPU_OFF + SVCPU_R13)(r13)
+	PPC_STL	r8, (SHADOW_VCPU_OFF + SVCPU_R12)(r13)
+	stw	r7, (SHADOW_VCPU_OFF + SVCPU_CR)(r13)
+
+	/* Save more register state  */
+
+	mfxer	r5
+	mfdar	r6
+	mfdsisr	r7
+	mfctr	r8
+	mflr	r9
+
+	stw	r5, (SHADOW_VCPU_OFF + SVCPU_XER)(r13)
+	PPC_STL	r6, (SHADOW_VCPU_OFF + SVCPU_FAULT_DAR)(r13)
+	stw	r7, (SHADOW_VCPU_OFF + SVCPU_FAULT_DSISR)(r13)
+	PPC_STL	r8, (SHADOW_VCPU_OFF + SVCPU_CTR)(r13)
+	PPC_STL	r9, (SHADOW_VCPU_OFF + SVCPU_LR)(r13)
+
+	/*
+	 * In order for us to easily get the last instruction,
+	 * we got the #vmexit at, we exploit the fact that the
+	 * virtual layout is still the same here, so we can just
+	 * ld from the guest's PC address
+	 */
+
+	/* We only load the last instruction when it's safe */
+	cmpwi	r12, BOOK3S_INTERRUPT_DATA_STORAGE
+	beq	ld_last_inst
+	cmpwi	r12, BOOK3S_INTERRUPT_PROGRAM
+	beq	ld_last_inst
+	cmpwi	r12, BOOK3S_INTERRUPT_ALIGNMENT
+	beq-	ld_last_inst
+
+	b	no_ld_last_inst
+
+ld_last_inst:
+	/* Save off the guest instruction we're at */
+
+	/* In case lwz faults */
+	li	r0, KVM_INST_FETCH_FAILED
+
+#ifdef USE_QUICK_LAST_INST
+
+	/* Set guest mode to 'jump over instruction' so if lwz faults
+	 * we'll just continue at the next IP. */
+	li	r9, KVM_GUEST_MODE_SKIP
+	stb	r9, (SHADOW_VCPU_OFF + SVCPU_IN_GUEST)(r13)
+
+	/*    1) enable paging for data */
+	mfmsr	r9
+	ori	r11, r9, MSR_DR			/* Enable paging for data */
+	mtmsr	r11
+	sync
+	/*    2) fetch the instruction */
+	lwz	r0, 0(r3)
+	/*    3) disable paging again */
+	mtmsr	r9
+	sync
+
+#endif
+	stw	r0, (SHADOW_VCPU_OFF + SVCPU_LAST_INST)(r13)
+
+no_ld_last_inst:
+
+	/* Unset guest mode */
+	li	r9, KVM_GUEST_MODE_NONE
+	stb	r9, (SHADOW_VCPU_OFF + SVCPU_IN_GUEST)(r13)
+
+	/* Switch back to host MMU */
+	LOAD_HOST_SEGMENTS
+
+	/* Register usage at this point:
+	 *
+	 * R1       = host R1
+	 * R2       = host R2
+	 * R12      = exit handler id
+	 * R13      = shadow vcpu - SHADOW_VCPU_OFF [=PACA on PPC64]
+	 * SVCPU.*  = guest *
+	 *
+	 */
+
+	/* RFI into the highmem handler */
+	mfmsr	r7
+	ori	r7, r7, MSR_IR|MSR_DR|MSR_RI|MSR_ME	/* Enable paging */
+	mtsrr1	r7
+	/* Load highmem handler address */
+	PPC_LL	r8, (SHADOW_VCPU_OFF + SVCPU_VMHANDLER)(r13)
+	mtsrr0	r8
+
+	RFI
+kvmppc_handler_trampoline_exit_end:
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/booke.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/booke.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/booke.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/booke.c	2010-08-01 18:11:14.000000000 -0400
@@ -133,6 +133,12 @@
 	kvmppc_booke_queue_irqprio(vcpu, BOOKE_IRQPRIO_EXTERNAL);
 }
 
+void kvmppc_core_dequeue_external(struct kvm_vcpu *vcpu,
+                                  struct kvm_interrupt *irq)
+{
+	clear_bit(BOOKE_IRQPRIO_EXTERNAL, &vcpu->arch.pending_exceptions);
+}
+
 /* Deliver the interrupt of the corresponding priority, if possible. */
 static int kvmppc_booke_irqprio_deliver(struct kvm_vcpu *vcpu,
                                         unsigned int priority)
@@ -479,6 +485,8 @@
 {
 	int i;
 
+	vcpu_load(vcpu);
+
 	regs->pc = vcpu->arch.pc;
 	regs->cr = kvmppc_get_cr(vcpu);
 	regs->ctr = vcpu->arch.ctr;
@@ -499,6 +507,8 @@
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
 		regs->gpr[i] = kvmppc_get_gpr(vcpu, i);
 
+	vcpu_put(vcpu);
+
 	return 0;
 }
 
@@ -506,6 +516,8 @@
 {
 	int i;
 
+	vcpu_load(vcpu);
+
 	vcpu->arch.pc = regs->pc;
 	kvmppc_set_cr(vcpu, regs->cr);
 	vcpu->arch.ctr = regs->ctr;
@@ -525,6 +537,8 @@
 	for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
 		kvmppc_set_gpr(vcpu, i, regs->gpr[i]);
 
+	vcpu_put(vcpu);
+
 	return 0;
 }
 
@@ -553,7 +567,12 @@
 int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
                                   struct kvm_translation *tr)
 {
-	return kvmppc_core_vcpu_translate(vcpu, tr);
+	int r;
+
+	vcpu_load(vcpu);
+	r = kvmppc_core_vcpu_translate(vcpu, tr);
+	vcpu_put(vcpu);
+	return r;
 }
 
 int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/e500.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/e500.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/e500.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/e500.c	2010-08-01 18:11:14.000000000 -0400
@@ -161,10 +161,10 @@
 	flush_icache_range(kvmppc_booke_handlers,
 			kvmppc_booke_handlers + max_ivor + kvmppc_handler_len);
 
-	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), THIS_MODULE);
+	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), 0, THIS_MODULE);
 }
 
-static void __init kvmppc_e500_exit(void)
+static void __exit kvmppc_e500_exit(void)
 {
 	kvmppc_booke_exit();
 }
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/emulate.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/emulate.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/emulate.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/emulate.c	2010-08-01 18:11:14.000000000 -0400
@@ -38,10 +38,12 @@
 #define OP_31_XOP_LBZX      87
 #define OP_31_XOP_STWX      151
 #define OP_31_XOP_STBX      215
+#define OP_31_XOP_LBZUX     119
 #define OP_31_XOP_STBUX     247
 #define OP_31_XOP_LHZX      279
 #define OP_31_XOP_LHZUX     311
 #define OP_31_XOP_MFSPR     339
+#define OP_31_XOP_LHAX      343
 #define OP_31_XOP_STHX      407
 #define OP_31_XOP_STHUX     439
 #define OP_31_XOP_MTSPR     467
@@ -62,10 +64,12 @@
 #define OP_STBU 39
 #define OP_LHZ  40
 #define OP_LHZU 41
+#define OP_LHA  42
+#define OP_LHAU 43
 #define OP_STH  44
 #define OP_STHU 45
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 static int kvmppc_dec_enabled(struct kvm_vcpu *vcpu)
 {
 	return 1;
@@ -82,7 +86,7 @@
 	unsigned long dec_nsec;
 
 	pr_debug("mtDEC: %x\n", vcpu->arch.dec);
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 	/* mtdec lowers the interrupt line when positive. */
 	kvmppc_core_dequeue_dec(vcpu);
 
@@ -128,7 +132,7 @@
  * from opcode tables in the future. */
 int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 {
-	u32 inst = vcpu->arch.last_inst;
+	u32 inst = kvmppc_get_last_inst(vcpu);
 	u32 ea;
 	int ra;
 	int rb;
@@ -143,13 +147,9 @@
 
 	pr_debug(KERN_INFO "Emulating opcode %d / %d\n", get_op(inst), get_xop(inst));
 
-	/* Try again next time */
-	if (inst == KVM_INST_FETCH_FAILED)
-		return EMULATE_DONE;
-
 	switch (get_op(inst)) {
 	case OP_TRAP:
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S
 	case OP_TRAP_64:
 		kvmppc_core_queue_program(vcpu, SRR1_PROGTRAP);
 #else
@@ -171,6 +171,19 @@
 			emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
 			break;
 
+		case OP_31_XOP_LBZUX:
+			rt = get_rt(inst);
+			ra = get_ra(inst);
+			rb = get_rb(inst);
+
+			ea = kvmppc_get_gpr(vcpu, rb);
+			if (ra)
+				ea += kvmppc_get_gpr(vcpu, ra);
+
+			emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
+			kvmppc_set_gpr(vcpu, ra, ea);
+			break;
+
 		case OP_31_XOP_STWX:
 			rs = get_rs(inst);
 			emulated = kvmppc_handle_store(run, vcpu,
@@ -200,6 +213,11 @@
 			kvmppc_set_gpr(vcpu, rs, ea);
 			break;
 
+		case OP_31_XOP_LHAX:
+			rt = get_rt(inst);
+			emulated = kvmppc_handle_loads(run, vcpu, rt, 2, 1);
+			break;
+
 		case OP_31_XOP_LHZX:
 			rt = get_rt(inst);
 			emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1);
@@ -450,6 +468,18 @@
 		kvmppc_set_gpr(vcpu, ra, vcpu->arch.paddr_accessed);
 		break;
 
+	case OP_LHA:
+		rt = get_rt(inst);
+		emulated = kvmppc_handle_loads(run, vcpu, rt, 2, 1);
+		break;
+
+	case OP_LHAU:
+		ra = get_ra(inst);
+		rt = get_rt(inst);
+		emulated = kvmppc_handle_loads(run, vcpu, rt, 2, 1);
+		kvmppc_set_gpr(vcpu, ra, vcpu->arch.paddr_accessed);
+		break;
+
 	case OP_STH:
 		rs = get_rs(inst);
 		emulated = kvmppc_handle_store(run, vcpu,
@@ -472,7 +502,9 @@
 
 	if (emulated == EMULATE_FAIL) {
 		emulated = kvmppc_core_emulate_op(run, vcpu, inst, &advance);
-		if (emulated == EMULATE_FAIL) {
+		if (emulated == EMULATE_AGAIN) {
+			advance = 0;
+		} else if (emulated == EMULATE_FAIL) {
 			advance = 0;
 			printk(KERN_ERR "Couldn't emulate instruction 0x%08x "
 			       "(op %d xop %d)\n", inst, get_op(inst), get_xop(inst));
@@ -480,10 +512,11 @@
 		}
 	}
 
-	trace_kvm_ppc_instr(inst, vcpu->arch.pc, emulated);
+	trace_kvm_ppc_instr(inst, kvmppc_get_pc(vcpu), emulated);
 
+	/* Advance past emulated instruction. */
 	if (advance)
-		vcpu->arch.pc += 4; /* Advance past emulated instruction. */
+		kvmppc_set_pc(vcpu, kvmppc_get_pc(vcpu) + 4);
 
 	return emulated;
 }
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/fpu.S linux-libre-2.6.35-gnu/arch/powerpc/kvm/fpu.S
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/fpu.S	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/fpu.S	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,273 @@
+/*
+ *  FPU helper code to use FPU operations from inside the kernel
+ *
+ *    Copyright (C) 2010 Alexander Graf (agraf@suse.de)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+/* Instructions operating on single parameters */
+
+/*
+ * Single operation with one input operand
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (short*)&result
+ * R5 = (short*)&param1
+ */
+#define FPS_ONE_IN(name) 					\
+_GLOBAL(fps_ ## name);							\
+	lfd	0,0(r3);		/* load up fpscr value */	\
+	MTFSF_L(0);							\
+	lfs	0,0(r5);						\
+									\
+	name	0,0;							\
+									\
+	stfs	0,0(r4);						\
+	mffs	0;							\
+	stfd	0,0(r3);	/* save new fpscr value */	\
+	blr
+
+/*
+ * Single operation with two input operands
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (short*)&result
+ * R5 = (short*)&param1
+ * R6 = (short*)&param2
+ */
+#define FPS_TWO_IN(name) 					\
+_GLOBAL(fps_ ## name);							\
+	lfd	0,0(r3);		/* load up fpscr value */	\
+	MTFSF_L(0);							\
+	lfs	0,0(r5);						\
+	lfs	1,0(r6);						\
+									\
+	name	0,0,1;							\
+									\
+	stfs	0,0(r4);						\
+	mffs	0;							\
+	stfd	0,0(r3);		/* save new fpscr value */	\
+	blr
+
+/*
+ * Single operation with three input operands
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (short*)&result
+ * R5 = (short*)&param1
+ * R6 = (short*)&param2
+ * R7 = (short*)&param3
+ */
+#define FPS_THREE_IN(name) 					\
+_GLOBAL(fps_ ## name);							\
+	lfd	0,0(r3);		/* load up fpscr value */	\
+	MTFSF_L(0);							\
+	lfs	0,0(r5);						\
+	lfs	1,0(r6);						\
+	lfs	2,0(r7);						\
+									\
+	name	0,0,1,2;						\
+									\
+	stfs	0,0(r4);						\
+	mffs	0;							\
+	stfd	0,0(r3);		/* save new fpscr value */	\
+	blr
+
+FPS_ONE_IN(fres)
+FPS_ONE_IN(frsqrte)
+FPS_ONE_IN(fsqrts)
+FPS_TWO_IN(fadds)
+FPS_TWO_IN(fdivs)
+FPS_TWO_IN(fmuls)
+FPS_TWO_IN(fsubs)
+FPS_THREE_IN(fmadds)
+FPS_THREE_IN(fmsubs)
+FPS_THREE_IN(fnmadds)
+FPS_THREE_IN(fnmsubs)
+FPS_THREE_IN(fsel)
+
+
+/* Instructions operating on double parameters */
+
+/*
+ * Beginning of double instruction processing
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&result
+ * R6 = (double*)&param1
+ * R7 = (double*)&param2 [load_two]
+ * R8 = (double*)&param3 [load_three]
+ * LR = instruction call function
+ */
+fpd_load_three:
+	lfd	2,0(r8)			/* load param3 */
+fpd_load_two:
+	lfd	1,0(r7)			/* load param2 */
+fpd_load_one:
+	lfd	0,0(r6)			/* load param1 */
+fpd_load_none:
+	lfd	3,0(r3)			/* load up fpscr value */
+	MTFSF_L(3)
+	lwz	r6, 0(r4)		/* load cr */
+	mtcr	r6
+	blr
+
+/*
+ * End of double instruction processing
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&result
+ * LR = caller of instruction call function
+ */
+fpd_return:
+	mfcr	r6
+	stfd	0,0(r5)			/* save result */
+	mffs	0
+	stfd	0,0(r3)			/* save new fpscr value */
+	stw	r6,0(r4)		/* save new cr value */
+	blr
+
+/*
+ * Double operation with no input operand
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&result
+ */
+#define FPD_NONE_IN(name) 						\
+_GLOBAL(fpd_ ## name);							\
+	mflr	r12;							\
+	bl	fpd_load_none;						\
+	mtlr	r12;							\
+									\
+	name.	0;			/* call instruction */		\
+	b	fpd_return
+
+/*
+ * Double operation with one input operand
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&result
+ * R6 = (double*)&param1
+ */
+#define FPD_ONE_IN(name) 						\
+_GLOBAL(fpd_ ## name);							\
+	mflr	r12;							\
+	bl	fpd_load_one;						\
+	mtlr	r12;							\
+									\
+	name.	0,0;			/* call instruction */		\
+	b	fpd_return
+
+/*
+ * Double operation with two input operands
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&result
+ * R6 = (double*)&param1
+ * R7 = (double*)&param2
+ * R8 = (double*)&param3
+ */
+#define FPD_TWO_IN(name) 						\
+_GLOBAL(fpd_ ## name);							\
+	mflr	r12;							\
+	bl	fpd_load_two;						\
+	mtlr	r12;							\
+									\
+	name.	0,0,1;			/* call instruction */		\
+	b	fpd_return
+
+/*
+ * CR Double operation with two input operands
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&param1
+ * R6 = (double*)&param2
+ * R7 = (double*)&param3
+ */
+#define FPD_TWO_IN_CR(name)						\
+_GLOBAL(fpd_ ## name);							\
+	lfd	1,0(r6);		/* load param2 */		\
+	lfd	0,0(r5);		/* load param1 */		\
+	lfd	3,0(r3);		/* load up fpscr value */	\
+	MTFSF_L(3);							\
+	lwz	r6, 0(r4);		/* load cr */			\
+	mtcr	r6;							\
+									\
+	name	0,0,1;			/* call instruction */		\
+	mfcr	r6;							\
+	mffs	0;							\
+	stfd	0,0(r3);		/* save new fpscr value */	\
+	stw	r6,0(r4);		/* save new cr value */		\
+	blr
+
+/*
+ * Double operation with three input operands
+ *
+ * R3 = (double*)&fpscr
+ * R4 = (u32*)&cr
+ * R5 = (double*)&result
+ * R6 = (double*)&param1
+ * R7 = (double*)&param2
+ * R8 = (double*)&param3
+ */
+#define FPD_THREE_IN(name) 						\
+_GLOBAL(fpd_ ## name);							\
+	mflr	r12;							\
+	bl	fpd_load_three;						\
+	mtlr	r12;							\
+									\
+	name.	0,0,1,2;		/* call instruction */		\
+	b	fpd_return
+
+FPD_ONE_IN(fsqrts)
+FPD_ONE_IN(frsqrtes)
+FPD_ONE_IN(fres)
+FPD_ONE_IN(frsp)
+FPD_ONE_IN(fctiw)
+FPD_ONE_IN(fctiwz)
+FPD_ONE_IN(fsqrt)
+FPD_ONE_IN(fre)
+FPD_ONE_IN(frsqrte)
+FPD_ONE_IN(fneg)
+FPD_ONE_IN(fabs)
+FPD_TWO_IN(fadds)
+FPD_TWO_IN(fsubs)
+FPD_TWO_IN(fdivs)
+FPD_TWO_IN(fmuls)
+FPD_TWO_IN_CR(fcmpu)
+FPD_TWO_IN(fcpsgn)
+FPD_TWO_IN(fdiv)
+FPD_TWO_IN(fadd)
+FPD_TWO_IN(fmul)
+FPD_TWO_IN_CR(fcmpo)
+FPD_TWO_IN(fsub)
+FPD_THREE_IN(fmsubs)
+FPD_THREE_IN(fmadds)
+FPD_THREE_IN(fnmsubs)
+FPD_THREE_IN(fnmadds)
+FPD_THREE_IN(fsel)
+FPD_THREE_IN(fmsub)
+FPD_THREE_IN(fmadd)
+FPD_THREE_IN(fnmsub)
+FPD_THREE_IN(fnmadd)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/Kconfig linux-libre-2.6.35-gnu/arch/powerpc/kvm/Kconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -22,12 +22,34 @@
 	select ANON_INODES
 	select KVM_MMIO
 
+config KVM_BOOK3S_HANDLER
+	bool
+
+config KVM_BOOK3S_32_HANDLER
+	bool
+	select KVM_BOOK3S_HANDLER
+
 config KVM_BOOK3S_64_HANDLER
 	bool
+	select KVM_BOOK3S_HANDLER
+
+config KVM_BOOK3S_32
+	tristate "KVM support for PowerPC book3s_32 processors"
+	depends on EXPERIMENTAL && PPC_BOOK3S_32 && !SMP && !PTE_64BIT
+	select KVM
+	select KVM_BOOK3S_32_HANDLER
+	---help---
+	  Support running unmodified book3s_32 guest kernels
+	  in virtual machines on book3s_32 host processors.
+
+	  This module provides access to the hardware capabilities through
+	  a character device node named /dev/kvm.
+
+	  If unsure, say N.
 
 config KVM_BOOK3S_64
 	tristate "KVM support for PowerPC book3s_64 processors"
-	depends on EXPERIMENTAL && PPC64
+	depends on EXPERIMENTAL && PPC_BOOK3S_64
 	select KVM
 	select KVM_BOOK3S_64_HANDLER
 	---help---
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/Makefile linux-libre-2.6.35-gnu/arch/powerpc/kvm/Makefile
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -14,7 +14,7 @@
 
 common-objs-y += powerpc.o emulate.o
 obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o
-obj-$(CONFIG_KVM_BOOK3S_64_HANDLER) += book3s_64_exports.o
+obj-$(CONFIG_KVM_BOOK3S_HANDLER) += book3s_exports.o
 
 AFLAGS_booke_interrupts.o := -I$(obj)
 
@@ -40,17 +40,31 @@
 
 kvm-book3s_64-objs := \
 	$(common-objs-y) \
+	fpu.o \
+	book3s_paired_singles.o \
 	book3s.o \
-	book3s_64_emulate.o \
-	book3s_64_interrupts.o \
+	book3s_emulate.o \
+	book3s_interrupts.o \
 	book3s_64_mmu_host.o \
 	book3s_64_mmu.o \
 	book3s_32_mmu.o
 kvm-objs-$(CONFIG_KVM_BOOK3S_64) := $(kvm-book3s_64-objs)
 
+kvm-book3s_32-objs := \
+	$(common-objs-y) \
+	fpu.o \
+	book3s_paired_singles.o \
+	book3s.o \
+	book3s_emulate.o \
+	book3s_interrupts.o \
+	book3s_32_mmu_host.o \
+	book3s_32_mmu.o
+kvm-objs-$(CONFIG_KVM_BOOK3S_32) := $(kvm-book3s_32-objs)
+
 kvm-objs := $(kvm-objs-m) $(kvm-objs-y)
 
 obj-$(CONFIG_KVM_440) += kvm.o
 obj-$(CONFIG_KVM_E500) += kvm.o
 obj-$(CONFIG_KVM_BOOK3S_64) += kvm.o
+obj-$(CONFIG_KVM_BOOK3S_32) += kvm.o
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/kvm/powerpc.c linux-libre-2.6.35-gnu/arch/powerpc/kvm/powerpc.c
--- linux-libre-2.6.34-gnu/arch/powerpc/kvm/powerpc.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/kvm/powerpc.c	2010-08-01 18:11:14.000000000 -0400
@@ -70,7 +70,7 @@
 	case EMULATE_FAIL:
 		/* XXX Deliver Program interrupt to guest. */
 		printk(KERN_EMERG "%s: emulation failed (%08x)\n", __func__,
-		       vcpu->arch.last_inst);
+		       kvmppc_get_last_inst(vcpu));
 		r = RESUME_HOST;
 		break;
 	default:
@@ -148,6 +148,10 @@
 
 	switch (ext) {
 	case KVM_CAP_PPC_SEGSTATE:
+	case KVM_CAP_PPC_PAIRED_SINGLES:
+	case KVM_CAP_PPC_UNSET_IRQ:
+	case KVM_CAP_ENABLE_CAP:
+	case KVM_CAP_PPC_OSI:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -193,12 +197,17 @@
 {
 	struct kvm_vcpu *vcpu;
 	vcpu = kvmppc_core_vcpu_create(kvm, id);
-	kvmppc_create_vcpu_debugfs(vcpu, id);
+	if (!IS_ERR(vcpu))
+		kvmppc_create_vcpu_debugfs(vcpu, id);
 	return vcpu;
 }
 
 void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
 {
+	/* Make sure we're not using the vcpu anymore */
+	hrtimer_cancel(&vcpu->arch.dec_timer);
+	tasklet_kill(&vcpu->arch.tasklet);
+
 	kvmppc_remove_vcpu_debugfs(vcpu);
 	kvmppc_core_vcpu_free(vcpu);
 }
@@ -278,7 +287,7 @@
 static void kvmppc_complete_mmio_load(struct kvm_vcpu *vcpu,
                                       struct kvm_run *run)
 {
-	ulong gpr;
+	u64 gpr;
 
 	if (run->mmio.len > sizeof(gpr)) {
 		printk(KERN_ERR "bad MMIO length: %d\n", run->mmio.len);
@@ -287,6 +296,7 @@
 
 	if (vcpu->arch.mmio_is_bigendian) {
 		switch (run->mmio.len) {
+		case 8: gpr = *(u64 *)run->mmio.data; break;
 		case 4: gpr = *(u32 *)run->mmio.data; break;
 		case 2: gpr = *(u16 *)run->mmio.data; break;
 		case 1: gpr = *(u8 *)run->mmio.data; break;
@@ -300,7 +310,43 @@
 		}
 	}
 
+	if (vcpu->arch.mmio_sign_extend) {
+		switch (run->mmio.len) {
+#ifdef CONFIG_PPC64
+		case 4:
+			gpr = (s64)(s32)gpr;
+			break;
+#endif
+		case 2:
+			gpr = (s64)(s16)gpr;
+			break;
+		case 1:
+			gpr = (s64)(s8)gpr;
+			break;
+		}
+	}
+
 	kvmppc_set_gpr(vcpu, vcpu->arch.io_gpr, gpr);
+
+	switch (vcpu->arch.io_gpr & KVM_REG_EXT_MASK) {
+	case KVM_REG_GPR:
+		kvmppc_set_gpr(vcpu, vcpu->arch.io_gpr, gpr);
+		break;
+	case KVM_REG_FPR:
+		vcpu->arch.fpr[vcpu->arch.io_gpr & KVM_REG_MASK] = gpr;
+		break;
+#ifdef CONFIG_PPC_BOOK3S
+	case KVM_REG_QPR:
+		vcpu->arch.qpr[vcpu->arch.io_gpr & KVM_REG_MASK] = gpr;
+		break;
+	case KVM_REG_FQPR:
+		vcpu->arch.fpr[vcpu->arch.io_gpr & KVM_REG_MASK] = gpr;
+		vcpu->arch.qpr[vcpu->arch.io_gpr & KVM_REG_MASK] = gpr;
+		break;
+#endif
+	default:
+		BUG();
+	}
 }
 
 int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
@@ -319,12 +365,25 @@
 	vcpu->arch.mmio_is_bigendian = is_bigendian;
 	vcpu->mmio_needed = 1;
 	vcpu->mmio_is_write = 0;
+	vcpu->arch.mmio_sign_extend = 0;
 
 	return EMULATE_DO_MMIO;
 }
 
+/* Same as above, but sign extends */
+int kvmppc_handle_loads(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                        unsigned int rt, unsigned int bytes, int is_bigendian)
+{
+	int r;
+
+	r = kvmppc_handle_load(run, vcpu, rt, bytes, is_bigendian);
+	vcpu->arch.mmio_sign_extend = 1;
+
+	return r;
+}
+
 int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
-                        u32 val, unsigned int bytes, int is_bigendian)
+                        u64 val, unsigned int bytes, int is_bigendian)
 {
 	void *data = run->mmio.data;
 
@@ -342,6 +401,7 @@
 	/* Store the value at the lowest bytes in 'data'. */
 	if (is_bigendian) {
 		switch (bytes) {
+		case 8: *(u64 *)data = val; break;
 		case 4: *(u32 *)data = val; break;
 		case 2: *(u16 *)data = val; break;
 		case 1: *(u8  *)data = val; break;
@@ -376,6 +436,13 @@
 		if (!vcpu->arch.dcr_is_write)
 			kvmppc_complete_dcr_load(vcpu, run);
 		vcpu->arch.dcr_needed = 0;
+	} else if (vcpu->arch.osi_needed) {
+		u64 *gprs = run->osi.gprs;
+		int i;
+
+		for (i = 0; i < 32; i++)
+			kvmppc_set_gpr(vcpu, i, gprs[i]);
+		vcpu->arch.osi_needed = 0;
 	}
 
 	kvmppc_core_deliver_interrupts(vcpu);
@@ -396,7 +463,10 @@
 
 int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu, struct kvm_interrupt *irq)
 {
-	kvmppc_core_queue_external(vcpu, irq);
+	if (irq->irq == KVM_INTERRUPT_UNSET)
+		kvmppc_core_dequeue_external(vcpu, irq);
+	else
+		kvmppc_core_queue_external(vcpu, irq);
 
 	if (waitqueue_active(&vcpu->wq)) {
 		wake_up_interruptible(&vcpu->wq);
@@ -406,6 +476,27 @@
 	return 0;
 }
 
+static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
+				     struct kvm_enable_cap *cap)
+{
+	int r;
+
+	if (cap->flags)
+		return -EINVAL;
+
+	switch (cap->cap) {
+	case KVM_CAP_PPC_OSI:
+		r = 0;
+		vcpu->arch.osi_enabled = true;
+		break;
+	default:
+		r = -EINVAL;
+		break;
+	}
+
+	return r;
+}
+
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
                                     struct kvm_mp_state *mp_state)
 {
@@ -434,6 +525,15 @@
 		r = kvm_vcpu_ioctl_interrupt(vcpu, &irq);
 		break;
 	}
+	case KVM_ENABLE_CAP:
+	{
+		struct kvm_enable_cap cap;
+		r = -EFAULT;
+		if (copy_from_user(&cap, argp, sizeof(cap)))
+			goto out;
+		r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap);
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/lib/crtsavres.S linux-libre-2.6.35-gnu/arch/powerpc/lib/crtsavres.S
--- linux-libre-2.6.34-gnu/arch/powerpc/lib/crtsavres.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/lib/crtsavres.S	2010-08-01 18:11:14.000000000 -0400
@@ -6,6 +6,7 @@
  *   Written By Michael Meissner
  *
  * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ * 64 bit additions from reading the PPC elf64abi document.
  *
  * This file is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -44,6 +45,8 @@
 
 #ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
 
+#ifndef CONFIG_PPC64
+
 /* Routines for saving integer registers, called by the compiler.  */
 /* Called with r11 pointing to the stack header word of the caller of the */
 /* function, just beyond the end of the integer save area.  */
@@ -226,4 +229,130 @@
 	mtlr	0
 	mr	1,11
 	blr
+
+#else /* CONFIG_PPC64 */
+
+.globl	_savegpr0_14
+_savegpr0_14:
+	std	r14,-144(r1)
+.globl	_savegpr0_15
+_savegpr0_15:
+	std	r15,-136(r1)
+.globl	_savegpr0_16
+_savegpr0_16:
+	std	r16,-128(r1)
+.globl	_savegpr0_17
+_savegpr0_17:
+	std	r17,-120(r1)
+.globl	_savegpr0_18
+_savegpr0_18:
+	std	r18,-112(r1)
+.globl	_savegpr0_19
+_savegpr0_19:
+	std	r19,-104(r1)
+.globl	_savegpr0_20
+_savegpr0_20:
+	std	r20,-96(r1)
+.globl	_savegpr0_21
+_savegpr0_21:
+	std	r21,-88(r1)
+.globl	_savegpr0_22
+_savegpr0_22:
+	std	r22,-80(r1)
+.globl	_savegpr0_23
+_savegpr0_23:
+	std	r23,-72(r1)
+.globl	_savegpr0_24
+_savegpr0_24:
+	std	r24,-64(r1)
+.globl	_savegpr0_25
+_savegpr0_25:
+	std	r25,-56(r1)
+.globl	_savegpr0_26
+_savegpr0_26:
+	std	r26,-48(r1)
+.globl	_savegpr0_27
+_savegpr0_27:
+	std	r27,-40(r1)
+.globl	_savegpr0_28
+_savegpr0_28:
+	std	r28,-32(r1)
+.globl	_savegpr0_29
+_savegpr0_29:
+	std	r29,-24(r1)
+.globl	_savegpr0_30
+_savegpr0_30:
+	std	r30,-16(r1)
+.globl	_savegpr0_31
+_savegpr0_31:
+	std	r31,-8(r1)
+	std	r0,16(r1)
+	blr
+
+.globl	_restgpr0_14
+_restgpr0_14:
+	ld	r14,-144(r1)
+.globl	_restgpr0_15
+_restgpr0_15:
+	ld	r15,-136(r1)
+.globl	_restgpr0_16
+_restgpr0_16:
+	ld	r16,-128(r1)
+.globl	_restgpr0_17
+_restgpr0_17:
+	ld	r17,-120(r1)
+.globl	_restgpr0_18
+_restgpr0_18:
+	ld	r18,-112(r1)
+.globl	_restgpr0_19
+_restgpr0_19:
+	ld	r19,-104(r1)
+.globl	_restgpr0_20
+_restgpr0_20:
+	ld	r20,-96(r1)
+.globl	_restgpr0_21
+_restgpr0_21:
+	ld	r21,-88(r1)
+.globl	_restgpr0_22
+_restgpr0_22:
+	ld	r22,-80(r1)
+.globl	_restgpr0_23
+_restgpr0_23:
+	ld	r23,-72(r1)
+.globl	_restgpr0_24
+_restgpr0_24:
+	ld	r24,-64(r1)
+.globl	_restgpr0_25
+_restgpr0_25:
+	ld	r25,-56(r1)
+.globl	_restgpr0_26
+_restgpr0_26:
+	ld	r26,-48(r1)
+.globl	_restgpr0_27
+_restgpr0_27:
+	ld	r27,-40(r1)
+.globl	_restgpr0_28
+_restgpr0_28:
+	ld	r28,-32(r1)
+.globl	_restgpr0_29
+_restgpr0_29:
+	ld	r0,16(r1)
+	ld	r29,-24(r1)
+	mtlr	r0
+	ld	r30,-16(r1)
+	ld	r31,-8(r1)
+	blr
+
+.globl	_restgpr0_30
+_restgpr0_30:
+	ld	r30,-16(r1)
+.globl	_restgpr0_31
+_restgpr0_31:
+	ld	r0,16(r1)
+	ld	r31,-8(r1)
+	mtlr	r0
+	blr
+
+#endif /* CONFIG_PPC64 */
+
 #endif
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/lib/feature-fixups.c linux-libre-2.6.35-gnu/arch/powerpc/lib/feature-fixups.c
--- linux-libre-2.6.34-gnu/arch/powerpc/lib/feature-fixups.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/lib/feature-fixups.c	2010-08-01 18:11:14.000000000 -0400
@@ -12,6 +12,7 @@
  *  2 of the License, or (at your option) any later version.
  */
 
+#include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/init.h>
@@ -288,8 +289,8 @@
 
 static void test_cpu_macros(void)
 {
-	extern void ftr_fixup_test_FTR_macros;
-	extern void ftr_fixup_test_FTR_macros_expected;
+	extern u8 ftr_fixup_test_FTR_macros;
+	extern u8 ftr_fixup_test_FTR_macros_expected;
 	unsigned long size = &ftr_fixup_test_FTR_macros_expected -
 			     &ftr_fixup_test_FTR_macros;
 
@@ -301,8 +302,8 @@
 static void test_fw_macros(void)
 {
 #ifdef CONFIG_PPC64
-	extern void ftr_fixup_test_FW_FTR_macros;
-	extern void ftr_fixup_test_FW_FTR_macros_expected;
+	extern u8 ftr_fixup_test_FW_FTR_macros;
+	extern u8 ftr_fixup_test_FW_FTR_macros_expected;
 	unsigned long size = &ftr_fixup_test_FW_FTR_macros_expected -
 			     &ftr_fixup_test_FW_FTR_macros;
 
@@ -314,10 +315,10 @@
 
 static void test_lwsync_macros(void)
 {
-	extern void lwsync_fixup_test;
-	extern void end_lwsync_fixup_test;
-	extern void lwsync_fixup_test_expected_LWSYNC;
-	extern void lwsync_fixup_test_expected_SYNC;
+	extern u8 lwsync_fixup_test;
+	extern u8 end_lwsync_fixup_test;
+	extern u8 lwsync_fixup_test_expected_LWSYNC;
+	extern u8 lwsync_fixup_test_expected_SYNC;
 	unsigned long size = &end_lwsync_fixup_test -
 			     &lwsync_fixup_test;
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/lib/Makefile linux-libre-2.6.35-gnu/arch/powerpc/lib/Makefile
--- linux-libre-2.6.34-gnu/arch/powerpc/lib/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/lib/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -12,8 +12,8 @@
 CFLAGS_REMOVE_feature-fixups.o = -pg
 
 obj-y			:= string.o alloc.o \
-			   checksum_$(CONFIG_WORD_SIZE).o
-obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
+			   checksum_$(CONFIG_WORD_SIZE).o crtsavres.o
+obj-$(CONFIG_PPC32)	+= div64.o copy_32.o
 obj-$(CONFIG_HAS_IOMEM)	+= devres.o
 
 obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/lib/string.S linux-libre-2.6.35-gnu/arch/powerpc/lib/string.S
--- linux-libre-2.6.34-gnu/arch/powerpc/lib/string.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/lib/string.S	2010-08-01 18:11:14.000000000 -0400
@@ -28,7 +28,7 @@
 /* This clears out any unused part of the destination buffer,
    just as the libc version does.  -- paulus */
 _GLOBAL(strncpy)
-	cmpwi	0,r5,0
+	PPC_LCMPI 0,r5,0
 	beqlr
 	mtctr	r5
 	addi	r6,r3,-1
@@ -39,7 +39,7 @@
 	bdnzf	2,1b		/* dec ctr, branch if ctr != 0 && !cr0.eq */
 	bnelr			/* if we didn't hit a null char, we're done */
 	mfctr	r5
-	cmpwi	0,r5,0		/* any space left in destination buffer? */
+	PPC_LCMPI 0,r5,0	/* any space left in destination buffer? */
 	beqlr			/* we know r0 == 0 here */
 2:	stbu	r0,1(r6)	/* clear it out if so */
 	bdnz	2b
@@ -70,8 +70,8 @@
 	blr
 
 _GLOBAL(strncmp)
-	PPC_LCMPI r5,0
-	beqlr
+	PPC_LCMPI 0,r5,0
+	beq-	2f
 	mtctr	r5
 	addi	r5,r3,-1
 	addi	r4,r4,-1
@@ -82,6 +82,8 @@
 	beqlr	1
 	bdnzt	eq,1b
 	blr
+2:	li	r3,0
+	blr
 
 _GLOBAL(strlen)
 	addi	r4,r3,-1
@@ -92,8 +94,8 @@
 	blr
 
 _GLOBAL(memcmp)
-	cmpwi	0,r5,0
-	ble-	2f
+	PPC_LCMPI 0,r5,0
+	beq-	2f
 	mtctr	r5
 	addi	r6,r3,-1
 	addi	r4,r4,-1
@@ -106,8 +108,8 @@
 	blr
 
 _GLOBAL(memchr)
-	cmpwi	0,r5,0
-	ble-	2f
+	PPC_LCMPI 0,r5,0
+	beq-	2f
 	mtctr	r5
 	addi	r3,r3,-1
 1:	lbzu	r0,1(r3)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/Makefile linux-libre-2.6.35-gnu/arch/powerpc/Makefile
--- linux-libre-2.6.34-gnu/arch/powerpc/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -92,10 +92,10 @@
 else
 	KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
 endif
-else
-LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
 endif
 
+LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
+
 ifeq ($(CONFIG_TUNE_CELL),y)
 	KBUILD_CFLAGS += $(call cc-option,-mtune=cell)
 endif
@@ -112,6 +112,11 @@
 # kernel considerably.
 KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time)
 
+# FIXME: the module load should be taught about the additional relocs
+# generated by this.
+# revert to pre-gcc-4.4 behaviour of .eh_frame
+KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
+
 # Never use string load/store instructions as they are
 # often slow when they are implemented at all
 KBUILD_CFLAGS		+= -mno-string
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/40x_mmu.c linux-libre-2.6.35-gnu/arch/powerpc/mm/40x_mmu.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/40x_mmu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/40x_mmu.c	2010-08-01 18:11:14.000000000 -0400
@@ -135,7 +135,7 @@
 	/* If the size of RAM is not an exact power of two, we may not
 	 * have covered RAM in its entirety with 16 and 4 MiB
 	 * pages. Consequently, restrict the top end of RAM currently
-	 * allocable so that calls to the LMB to allocate PTEs for "tail"
+	 * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
 	 * coverage with normal-sized pages (or other reasons) do not
 	 * attempt to allocate outside the allowed range.
 	 */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/44x_mmu.c linux-libre-2.6.35-gnu/arch/powerpc/mm/44x_mmu.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/44x_mmu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/44x_mmu.c	2010-08-01 18:11:14.000000000 -0400
@@ -38,7 +38,9 @@
 unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
 int icache_44x_need_flush;
 
-static void __init ppc44x_update_tlb_hwater(void)
+unsigned long tlb_47x_boltmap[1024/8];
+
+static void __cpuinit ppc44x_update_tlb_hwater(void)
 {
 	extern unsigned int tlb_44x_patch_hwater_D[];
 	extern unsigned int tlb_44x_patch_hwater_I[];
@@ -59,7 +61,7 @@
 }
 
 /*
- * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
+ * "Pins" a 256MB TLB entry in AS0 for kernel lowmem for 44x type MMU
  */
 static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 {
@@ -67,12 +69,18 @@
 
 	ppc44x_update_tlb_hwater();
 
+	mtspr(SPRN_MMUCR, 0);
+
 	__asm__ __volatile__(
 		"tlbwe	%2,%3,%4\n"
 		"tlbwe	%1,%3,%5\n"
 		"tlbwe	%0,%3,%6\n"
 	:
+#ifdef CONFIG_PPC47x
+	: "r" (PPC47x_TLB2_S_RWX),
+#else
 	: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+#endif
 	  "r" (phys),
 	  "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
 	  "r" (entry),
@@ -81,8 +89,93 @@
 	  "i" (PPC44x_TLB_ATTRIB));
 }
 
+static int __init ppc47x_find_free_bolted(void)
+{
+	unsigned int mmube0 = mfspr(SPRN_MMUBE0);
+	unsigned int mmube1 = mfspr(SPRN_MMUBE1);
+
+	if (!(mmube0 & MMUBE0_VBE0))
+		return 0;
+	if (!(mmube0 & MMUBE0_VBE1))
+		return 1;
+	if (!(mmube0 & MMUBE0_VBE2))
+		return 2;
+	if (!(mmube1 & MMUBE1_VBE3))
+		return 3;
+	if (!(mmube1 & MMUBE1_VBE4))
+		return 4;
+	if (!(mmube1 & MMUBE1_VBE5))
+		return 5;
+	return -1;
+}
+
+static void __init ppc47x_update_boltmap(void)
+{
+	unsigned int mmube0 = mfspr(SPRN_MMUBE0);
+	unsigned int mmube1 = mfspr(SPRN_MMUBE1);
+
+	if (mmube0 & MMUBE0_VBE0)
+		__set_bit((mmube0 >> MMUBE0_IBE0_SHIFT) & 0xff,
+			  tlb_47x_boltmap);
+	if (mmube0 & MMUBE0_VBE1)
+		__set_bit((mmube0 >> MMUBE0_IBE1_SHIFT) & 0xff,
+			  tlb_47x_boltmap);
+	if (mmube0 & MMUBE0_VBE2)
+		__set_bit((mmube0 >> MMUBE0_IBE2_SHIFT) & 0xff,
+			  tlb_47x_boltmap);
+	if (mmube1 & MMUBE1_VBE3)
+		__set_bit((mmube1 >> MMUBE1_IBE3_SHIFT) & 0xff,
+			  tlb_47x_boltmap);
+	if (mmube1 & MMUBE1_VBE4)
+		__set_bit((mmube1 >> MMUBE1_IBE4_SHIFT) & 0xff,
+			  tlb_47x_boltmap);
+	if (mmube1 & MMUBE1_VBE5)
+		__set_bit((mmube1 >> MMUBE1_IBE5_SHIFT) & 0xff,
+			  tlb_47x_boltmap);
+}
+
+/*
+ * "Pins" a 256MB TLB entry in AS0 for kernel lowmem for 47x type MMU
+ */
+static void __cpuinit ppc47x_pin_tlb(unsigned int virt, unsigned int phys)
+{
+	unsigned int rA;
+	int bolted;
+
+	/* Base rA is HW way select, way 0, bolted bit set */
+	rA = 0x88000000;
+
+	/* Look for a bolted entry slot */
+	bolted = ppc47x_find_free_bolted();
+	BUG_ON(bolted < 0);
+
+	/* Insert bolted slot number */
+	rA |= bolted << 24;
+
+	pr_debug("256M TLB entry for 0x%08x->0x%08x in bolt slot %d\n",
+		 virt, phys, bolted);
+
+	mtspr(SPRN_MMUCR, 0);
+
+	__asm__ __volatile__(
+		"tlbwe	%2,%3,0\n"
+		"tlbwe	%1,%3,1\n"
+		"tlbwe	%0,%3,2\n"
+		:
+		: "r" (PPC47x_TLB2_SW | PPC47x_TLB2_SR |
+		       PPC47x_TLB2_SX
+#ifdef CONFIG_SMP
+		       | PPC47x_TLB2_M
+#endif
+		       ),
+		  "r" (phys),
+		  "r" (virt | PPC47x_TLB0_VALID | PPC47x_TLB0_256M),
+		  "r" (rA));
+}
+
 void __init MMU_init_hw(void)
 {
+	/* This is not useful on 47x but won't hurt either */
 	ppc44x_update_tlb_hwater();
 
 	flush_instruction_cache();
@@ -95,8 +188,51 @@
 	/* Pin in enough TLBs to cover any lowmem not covered by the
 	 * initial 256M mapping established in head_44x.S */
 	for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
-	     addr += PPC_PIN_SIZE)
-		ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
+	     addr += PPC_PIN_SIZE) {
+		if (mmu_has_feature(MMU_FTR_TYPE_47x))
+			ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);
+		else
+			ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
+	}
+	if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
+		ppc47x_update_boltmap();
+
+#ifdef DEBUG
+		{
+			int i;
 
+			printk(KERN_DEBUG "bolted entries: ");
+			for (i = 0; i < 255; i++) {
+				if (test_bit(i, tlb_47x_boltmap))
+					printk("%d ", i);
+			}
+			printk("\n");
+		}
+#endif /* DEBUG */
+	}
 	return total_lowmem;
 }
+
+#ifdef CONFIG_SMP
+void __cpuinit mmu_init_secondary(int cpu)
+{
+	unsigned long addr;
+
+	/* Pin in enough TLBs to cover any lowmem not covered by the
+	 * initial 256M mapping established in head_44x.S
+	 *
+	 * WARNING: This is called with only the first 256M of the
+	 * linear mapping in the TLB and we can't take faults yet
+	 * so beware of what this code uses. It runs off a temporary
+	 * stack. current (r2) isn't initialized, smp_processor_id()
+	 * will not work, current thread info isn't accessible, ...
+	 */
+	for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
+	     addr += PPC_PIN_SIZE) {
+		if (mmu_has_feature(MMU_FTR_TYPE_47x))
+			ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);
+		else
+			ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
+	}
+}
+#endif /* CONFIG_SMP */
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/fault.c linux-libre-2.6.35-gnu/arch/powerpc/mm/fault.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/fault.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/fault.c	2010-08-01 18:11:14.000000000 -0400
@@ -151,13 +151,14 @@
 	if (!user_mode(regs) && (address >= TASK_SIZE))
 		return SIGSEGV;
 
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
+#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE) || \
+			     defined(CONFIG_PPC_BOOK3S_64))
   	if (error_code & DSISR_DABRMATCH) {
 		/* DABR match */
 		do_dabr(regs, address, error_code);
 		return 0;
 	}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
+#endif
 
 	if (in_atomic() || mm == NULL) {
 		if (!user_mode(regs))
@@ -307,7 +308,6 @@
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
- survive:
 	ret = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0);
 	if (unlikely(ret & VM_FAULT_ERROR)) {
 		if (ret & VM_FAULT_OOM)
@@ -359,15 +359,10 @@
  */
 out_of_memory:
 	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	return SIGKILL;
+	if (!user_mode(regs))
+		return SIGKILL;
+	pagefault_out_of_memory();
+	return 0;
 
 do_sigbus:
 	up_read(&mm->mmap_sem);
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/fsl_booke_mmu.c linux-libre-2.6.35-gnu/arch/powerpc/mm/fsl_booke_mmu.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/fsl_booke_mmu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/fsl_booke_mmu.c	2010-08-01 18:11:14.000000000 -0400
@@ -2,7 +2,7 @@
  * Modifications by Kumar Gala (galak@kernel.crashing.org) to support
  * E500 Book E processors.
  *
- * Copyright 2004 Freescale Semiconductor, Inc
+ * Copyright 2004,2010 Freescale Semiconductor, Inc.
  *
  * This file contains the routines for initializing the MMU
  * on the 4xx series of chips.
@@ -56,19 +56,13 @@
 
 unsigned int tlbcam_index;
 
-#define NUM_TLBCAMS	(64)
 
 #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
 #error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS"
 #endif
 
-struct tlbcam {
-	u32	MAS0;
-	u32	MAS1;
-	unsigned long	MAS2;
-	u32	MAS3;
-	u32	MAS7;
-} TLBCAM[NUM_TLBCAMS];
+#define NUM_TLBCAMS	(64)
+struct tlbcam TLBCAM[NUM_TLBCAMS];
 
 struct tlbcamrange {
 	unsigned long start;
@@ -109,19 +103,6 @@
 	return 0;
 }
 
-void loadcam_entry(int idx)
-{
-	mtspr(SPRN_MAS0, TLBCAM[idx].MAS0);
-	mtspr(SPRN_MAS1, TLBCAM[idx].MAS1);
-	mtspr(SPRN_MAS2, TLBCAM[idx].MAS2);
-	mtspr(SPRN_MAS3, TLBCAM[idx].MAS3);
-
-	if (mmu_has_feature(MMU_FTR_BIG_PHYS))
-		mtspr(SPRN_MAS7, TLBCAM[idx].MAS7);
-
-	asm volatile("isync;tlbwe;isync" : : : "memory");
-}
-
 /*
  * Set up one of the I/D BAT (block address translation) register pairs.
  * The parameters are not checked; in particular size must be a power
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/hash_low_64.S linux-libre-2.6.35-gnu/arch/powerpc/mm/hash_low_64.S
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/hash_low_64.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/hash_low_64.S	2010-08-01 18:11:14.000000000 -0400
@@ -68,9 +68,6 @@
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 	
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
@@ -347,9 +344,6 @@
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
@@ -687,9 +681,6 @@
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/hash_utils_64.c linux-libre-2.6.35-gnu/arch/powerpc/mm/hash_utils_64.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/hash_utils_64.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/hash_utils_64.c	2010-08-01 18:11:14.000000000 -0400
@@ -31,7 +31,7 @@
 #include <linux/cache.h>
 #include <linux/init.h>
 #include <linux/signal.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/pgtable.h>
@@ -384,8 +384,8 @@
 	printk(KERN_INFO "Huge page(16GB) memory: "
 			"addr = 0x%lX size = 0x%lX pages = %d\n",
 			phys_addr, block_size, expected_pages);
-	if (phys_addr + (16 * GB) <= lmb_end_of_DRAM()) {
-		lmb_reserve(phys_addr, block_size * expected_pages);
+	if (phys_addr + (16 * GB) <= memblock_end_of_DRAM()) {
+		memblock_reserve(phys_addr, block_size * expected_pages);
 		add_gpage(phys_addr, block_size, expected_pages);
 	}
 	return 0;
@@ -458,7 +458,7 @@
 	 * and we have at least 1G of RAM at boot
 	 */
 	if (mmu_psize_defs[MMU_PAGE_16M].shift &&
-	    lmb_phys_mem_size() >= 0x40000000)
+	    memblock_phys_mem_size() >= 0x40000000)
 		mmu_vmemmap_psize = MMU_PAGE_16M;
 	else if (mmu_psize_defs[MMU_PAGE_64K].shift)
 		mmu_vmemmap_psize = MMU_PAGE_64K;
@@ -520,7 +520,7 @@
 		return 1UL << ppc64_pft_size;
 
 	/* round mem_size up to next power of 2 */
-	mem_size = lmb_phys_mem_size();
+	mem_size = memblock_phys_mem_size();
 	rnd_mem_size = 1UL << __ilog2(mem_size);
 	if (rnd_mem_size < mem_size)
 		rnd_mem_size <<= 1;
@@ -627,7 +627,7 @@
 		else
 			limit = 0;
 
-		table = lmb_alloc_base(htab_size_bytes, htab_size_bytes, limit);
+		table = memblock_alloc_base(htab_size_bytes, htab_size_bytes, limit);
 
 		DBG("Hash table allocated at %lx, size: %lx\n", table,
 		    htab_size_bytes);
@@ -647,9 +647,9 @@
 	prot = pgprot_val(PAGE_KERNEL);
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
-	linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
-	linear_map_hash_slots = __va(lmb_alloc_base(linear_map_hash_count,
-						    1, lmb.rmo_size));
+	linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	linear_map_hash_slots = __va(memblock_alloc_base(linear_map_hash_count,
+						    1, memblock.rmo_size));
 	memset(linear_map_hash_slots, 0, linear_map_hash_count);
 #endif /* CONFIG_DEBUG_PAGEALLOC */
 
@@ -659,16 +659,16 @@
 	 */
 
 	/* create bolted the linear mapping in the hash table */
-	for (i=0; i < lmb.memory.cnt; i++) {
-		base = (unsigned long)__va(lmb.memory.region[i].base);
-		size = lmb.memory.region[i].size;
+	for (i=0; i < memblock.memory.cnt; i++) {
+		base = (unsigned long)__va(memblock.memory.region[i].base);
+		size = memblock.memory.region[i].size;
 
 		DBG("creating mapping for region: %lx..%lx (prot: %lx)\n",
 		    base, size, prot);
 
 #ifdef CONFIG_U3_DART
 		/* Do not map the DART space. Fortunately, it will be aligned
-		 * in such a way that it will not cross two lmb regions and
+		 * in such a way that it will not cross two memblock regions and
 		 * will fit within a single 16Mb page.
 		 * The DART space is assumed to be a full 16Mb region even if
 		 * we only use 2Mb of that space. We will use more of it later
@@ -871,6 +871,18 @@
 }
 #endif
 
+void hash_failure_debug(unsigned long ea, unsigned long access,
+			unsigned long vsid, unsigned long trap,
+			int ssize, int psize, unsigned long pte)
+{
+	if (!printk_ratelimit())
+		return;
+	pr_info("mm: Hashing failure ! EA=0x%lx access=0x%lx current=%s\n",
+		ea, access, current->comm);
+	pr_info("    trap=0x%lx vsid=0x%lx ssize=%d psize=%d pte=0x%lx\n",
+		trap, vsid, ssize, psize, pte);
+}
+
 /* Result code is:
  *  0 - handled
  *  1 - normal page fault
@@ -955,6 +967,17 @@
 		return 1;
 	}
 
+	/* Add _PAGE_PRESENT to the required access perm */
+	access |= _PAGE_PRESENT;
+
+	/* Pre-check access permissions (will be re-checked atomically
+	 * in __hash_page_XX but this pre-check is a fast path
+	 */
+	if (access & ~pte_val(*ptep)) {
+		DBG_LOW(" no access !\n");
+		return 1;
+	}
+
 #ifdef CONFIG_HUGETLB_PAGE
 	if (hugeshift)
 		return __hash_page_huge(ea, access, vsid, ptep, trap, local,
@@ -967,14 +990,6 @@
 	DBG_LOW(" i-pte: %016lx %016lx\n", pte_val(*ptep),
 		pte_val(*(ptep + PTRS_PER_PTE)));
 #endif
-	/* Pre-check access permissions (will be re-checked atomically
-	 * in __hash_page_XX but this pre-check is a fast path
-	 */
-	if (access & ~pte_val(*ptep)) {
-		DBG_LOW(" no access !\n");
-		return 1;
-	}
-
 	/* Do actual hashing */
 #ifdef CONFIG_PPC_64K_PAGES
 	/* If _PAGE_4K_PFN is set, make sure this is a 4k segment */
@@ -1033,6 +1048,12 @@
 					    local, ssize, spp);
 	}
 
+	/* Dump some info in case of hash insertion failure, they should
+	 * never happen so it is really useful to know if/when they do
+	 */
+	if (rc == -1)
+		hash_failure_debug(ea, access, vsid, trap, ssize, psize,
+				   pte_val(*ptep));
 #ifndef CONFIG_PPC_64K_PAGES
 	DBG_LOW(" o-pte: %016lx\n", pte_val(*ptep));
 #else
@@ -1051,8 +1072,7 @@
 	void *pgdir;
 	pte_t *ptep;
 	unsigned long flags;
-	int local = 0;
-	int ssize;
+	int rc, ssize, local = 0;
 
 	BUG_ON(REGION_ID(ea) != USER_REGION_ID);
 
@@ -1098,11 +1118,18 @@
 	/* Hash it in */
 #ifdef CONFIG_PPC_HAS_HASH_64K
 	if (mm->context.user_psize == MMU_PAGE_64K)
-		__hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
+		rc = __hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
 	else
 #endif /* CONFIG_PPC_HAS_HASH_64K */
-		__hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
-			       subpage_protection(pgdir, ea));
+		rc = __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
+				    subpage_protection(pgdir, ea));
+
+	/* Dump some info in case of hash insertion failure, they should
+	 * never happen so it is really useful to know if/when they do
+	 */
+	if (rc == -1)
+		hash_failure_debug(ea, access, vsid, trap, ssize,
+				   mm->context.user_psize, pte_val(*ptep));
 
 	local_irq_restore(flags);
 }
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/hugetlbpage-hash64.c linux-libre-2.6.35-gnu/arch/powerpc/mm/hugetlbpage-hash64.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/hugetlbpage-hash64.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/hugetlbpage-hash64.c	2010-08-01 18:11:14.000000000 -0400
@@ -21,21 +21,13 @@
 	unsigned long old_pte, new_pte;
 	unsigned long va, rflags, pa, sz;
 	long slot;
-	int err = 1;
 
 	BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
 
 	/* Search the Linux page table for a match with va */
 	va = hpt_va(ea, vsid, ssize);
 
-	/*
-	 * Check the user's access rights to the page.  If access should be
-	 * prevented then send the problem up to do_page_fault.
-	 */
-	if (unlikely(access & ~pte_val(*ptep)))
-		goto out;
-	/*
-	 * At this point, we have a pte (old_pte) which can be used to build
+	/* At this point, we have a pte (old_pte) which can be used to build
 	 * or update an HPTE. There are 2 cases:
 	 *
 	 * 1. There is a valid (present) pte with no associated HPTE (this is
@@ -49,9 +41,17 @@
 
 	do {
 		old_pte = pte_val(*ptep);
-		if (old_pte & _PAGE_BUSY)
-			goto out;
+		/* If PTE busy, retry the access */
+		if (unlikely(old_pte & _PAGE_BUSY))
+			return 0;
+		/* If PTE permissions don't match, take page fault */
+		if (unlikely(access & ~old_pte))
+			return 1;
+		/* Try to lock the PTE, add ACCESSED and DIRTY if it was
+		 * a write access */
 		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+		if (access & _PAGE_RW)
+			new_pte |= _PAGE_DIRTY;
 	} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
 					 old_pte, new_pte));
 
@@ -121,8 +121,16 @@
                         }
 		}
 
-		if (unlikely(slot == -2))
-			panic("hash_huge_page: pte_insert failed\n");
+		/*
+		 * Hypervisor failure. Restore old pte and return -1
+		 * similar to __hash_page_*
+		 */
+		if (unlikely(slot == -2)) {
+			*ptep = __pte(old_pte);
+			hash_failure_debug(ea, access, vsid, trap, ssize,
+					   mmu_psize, old_pte);
+			return -1;
+		}
 
 		new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
 	}
@@ -131,9 +139,5 @@
 	 * No need to use ldarx/stdcx here
 	 */
 	*ptep = __pte(new_pte & ~_PAGE_BUSY);
-
-	err = 0;
-
- out:
-	return err;
+	return 0;
 }
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/init_32.c linux-libre-2.6.35-gnu/arch/powerpc/mm/init_32.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/init_32.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/init_32.c	2010-08-01 18:11:14.000000000 -0400
@@ -30,7 +30,7 @@
 #include <linux/highmem.h>
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/gfp.h>
 
 #include <asm/pgalloc.h>
@@ -136,17 +136,17 @@
 	/* parse args from command line */
 	MMU_setup();
 
-	if (lmb.memory.cnt > 1) {
+	if (memblock.memory.cnt > 1) {
 #ifndef CONFIG_WII
-		lmb.memory.cnt = 1;
-		lmb_analyze();
+		memblock.memory.cnt = 1;
+		memblock_analyze();
 		printk(KERN_WARNING "Only using first contiguous memory region");
 #else
 		wii_memory_fixups();
 #endif
 	}
 
-	total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
+	total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
 	lowmem_end_addr = memstart_addr + total_lowmem;
 
 #ifdef CONFIG_FSL_BOOKE
@@ -161,8 +161,8 @@
 		lowmem_end_addr = memstart_addr + total_lowmem;
 #ifndef CONFIG_HIGHMEM
 		total_memory = total_lowmem;
-		lmb_enforce_memory_limit(lowmem_end_addr);
-		lmb_analyze();
+		memblock_enforce_memory_limit(lowmem_end_addr);
+		memblock_analyze();
 #endif /* CONFIG_HIGHMEM */
 	}
 
@@ -200,7 +200,7 @@
 	if (init_bootmem_done) {
 		p = alloc_bootmem_pages(PAGE_SIZE);
 	} else {
-		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
 					__initial_memory_limit_addr));
 	}
 	return p;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/init_64.c linux-libre-2.6.35-gnu/arch/powerpc/mm/init_64.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/init_64.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/init_64.c	2010-08-01 18:11:14.000000000 -0400
@@ -40,7 +40,7 @@
 #include <linux/nodemask.h>
 #include <linux/module.h>
 #include <linux/poison.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/hugetlb.h>
 #include <linux/slab.h>
 
@@ -252,6 +252,47 @@
 }
 #endif /* CONFIG_PPC_BOOK3E */
 
+struct vmemmap_backing *vmemmap_list;
+
+static __meminit struct vmemmap_backing * vmemmap_list_alloc(int node)
+{
+	static struct vmemmap_backing *next;
+	static int num_left;
+
+	/* allocate a page when required and hand out chunks */
+	if (!next || !num_left) {
+		next = vmemmap_alloc_block(PAGE_SIZE, node);
+		if (unlikely(!next)) {
+			WARN_ON(1);
+			return NULL;
+		}
+		num_left = PAGE_SIZE / sizeof(struct vmemmap_backing);
+	}
+
+	num_left--;
+
+	return next++;
+}
+
+static __meminit void vmemmap_list_populate(unsigned long phys,
+					    unsigned long start,
+					    int node)
+{
+	struct vmemmap_backing *vmem_back;
+
+	vmem_back = vmemmap_list_alloc(node);
+	if (unlikely(!vmem_back)) {
+		WARN_ON(1);
+		return;
+	}
+
+	vmem_back->phys = phys;
+	vmem_back->virt_addr = start;
+	vmem_back->list = vmemmap_list;
+
+	vmemmap_list = vmem_back;
+}
+
 int __meminit vmemmap_populate(struct page *start_page,
 			       unsigned long nr_pages, int node)
 {
@@ -276,6 +317,8 @@
 		if (!p)
 			return -ENOMEM;
 
+		vmemmap_list_populate(__pa(p), start, node);
+
 		pr_debug("      * %016lx..%016lx allocated at %p\n",
 			 start, start + page_size, p);
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/mem.c linux-libre-2.6.35-gnu/arch/powerpc/mm/mem.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/mem.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/mem.c	2010-08-01 18:11:14.000000000 -0400
@@ -32,7 +32,7 @@
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
 #include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/hugetlb.h>
 
 #include <asm/pgalloc.h>
@@ -83,13 +83,13 @@
 #else
 	unsigned long paddr = (pfn << PAGE_SHIFT);
 	int i;
-	for (i=0; i < lmb.memory.cnt; i++) {
+	for (i=0; i < memblock.memory.cnt; i++) {
 		unsigned long base;
 
-		base = lmb.memory.region[i].base;
+		base = memblock.memory.region[i].base;
 
 		if ((paddr >= base) &&
-			(paddr < (base + lmb.memory.region[i].size))) {
+			(paddr < (base + memblock.memory.region[i].size))) {
 			return 1;
 		}
 	}
@@ -142,14 +142,14 @@
 /*
  * walk_memory_resource() needs to make sure there is no holes in a given
  * memory range.  PPC64 does not maintain the memory layout in /proc/iomem.
- * Instead it maintains it in lmb.memory structures.  Walk through the
+ * Instead it maintains it in memblock.memory structures.  Walk through the
  * memory regions, find holes and callback for contiguous regions.
  */
 int
 walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
 		void *arg, int (*func)(unsigned long, unsigned long, void *))
 {
-	struct lmb_property res;
+	struct memblock_property res;
 	unsigned long pfn, len;
 	u64 end;
 	int ret = -1;
@@ -158,7 +158,7 @@
 	res.size = (u64) nr_pages << PAGE_SHIFT;
 
 	end = res.base + res.size - 1;
-	while ((res.base < end) && (lmb_find(&res) >= 0)) {
+	while ((res.base < end) && (memblock_find(&res) >= 0)) {
 		pfn = (unsigned long)(res.base >> PAGE_SHIFT);
 		len = (unsigned long)(res.size >> PAGE_SHIFT);
 		ret = (*func)(pfn, len, arg);
@@ -184,8 +184,8 @@
 	unsigned long total_pages;
 	int boot_mapsize;
 
-	max_low_pfn = max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
-	total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
+	max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	total_pages = (memblock_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
 #ifdef CONFIG_HIGHMEM
 	total_pages = total_lowmem >> PAGE_SHIFT;
 	max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
@@ -198,16 +198,16 @@
 	 */
 	bootmap_pages = bootmem_bootmap_pages(total_pages);
 
-	start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
+	start = memblock_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
 
 	min_low_pfn = MEMORY_START >> PAGE_SHIFT;
 	boot_mapsize = init_bootmem_node(NODE_DATA(0), start >> PAGE_SHIFT, min_low_pfn, max_low_pfn);
 
 	/* Add active regions with valid PFNs */
-	for (i = 0; i < lmb.memory.cnt; i++) {
+	for (i = 0; i < memblock.memory.cnt; i++) {
 		unsigned long start_pfn, end_pfn;
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 		add_active_range(0, start_pfn, end_pfn);
 	}
 
@@ -218,17 +218,17 @@
 	free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT);
 
 	/* reserve the sections we're already using */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long addr = lmb.reserved.region[i].base +
-				     lmb_size_bytes(&lmb.reserved, i) - 1;
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long addr = memblock.reserved.region[i].base +
+				     memblock_size_bytes(&memblock.reserved, i) - 1;
 		if (addr < lowmem_end_addr)
-			reserve_bootmem(lmb.reserved.region[i].base,
-					lmb_size_bytes(&lmb.reserved, i),
+			reserve_bootmem(memblock.reserved.region[i].base,
+					memblock_size_bytes(&memblock.reserved, i),
 					BOOTMEM_DEFAULT);
-		else if (lmb.reserved.region[i].base < lowmem_end_addr) {
+		else if (memblock.reserved.region[i].base < lowmem_end_addr) {
 			unsigned long adjusted_size = lowmem_end_addr -
-				      lmb.reserved.region[i].base;
-			reserve_bootmem(lmb.reserved.region[i].base,
+				      memblock.reserved.region[i].base;
+			reserve_bootmem(memblock.reserved.region[i].base,
 					adjusted_size, BOOTMEM_DEFAULT);
 		}
 	}
@@ -236,9 +236,9 @@
 	free_bootmem_with_active_regions(0, max_pfn);
 
 	/* reserve the sections we're already using */
-	for (i = 0; i < lmb.reserved.cnt; i++)
-		reserve_bootmem(lmb.reserved.region[i].base,
-				lmb_size_bytes(&lmb.reserved, i),
+	for (i = 0; i < memblock.reserved.cnt; i++)
+		reserve_bootmem(memblock.reserved.region[i].base,
+				memblock_size_bytes(&memblock.reserved, i),
 				BOOTMEM_DEFAULT);
 
 #endif
@@ -251,20 +251,20 @@
 /* mark pages that don't exist as nosave */
 static int __init mark_nonram_nosave(void)
 {
-	unsigned long lmb_next_region_start_pfn,
-		      lmb_region_max_pfn;
+	unsigned long memblock_next_region_start_pfn,
+		      memblock_region_max_pfn;
 	int i;
 
-	for (i = 0; i < lmb.memory.cnt - 1; i++) {
-		lmb_region_max_pfn =
-			(lmb.memory.region[i].base >> PAGE_SHIFT) +
-			(lmb.memory.region[i].size >> PAGE_SHIFT);
-		lmb_next_region_start_pfn =
-			lmb.memory.region[i+1].base >> PAGE_SHIFT;
+	for (i = 0; i < memblock.memory.cnt - 1; i++) {
+		memblock_region_max_pfn =
+			(memblock.memory.region[i].base >> PAGE_SHIFT) +
+			(memblock.memory.region[i].size >> PAGE_SHIFT);
+		memblock_next_region_start_pfn =
+			memblock.memory.region[i+1].base >> PAGE_SHIFT;
 
-		if (lmb_region_max_pfn < lmb_next_region_start_pfn)
-			register_nosave_region(lmb_region_max_pfn,
-					       lmb_next_region_start_pfn);
+		if (memblock_region_max_pfn < memblock_next_region_start_pfn)
+			register_nosave_region(memblock_region_max_pfn,
+					       memblock_next_region_start_pfn);
 	}
 
 	return 0;
@@ -275,8 +275,8 @@
  */
 void __init paging_init(void)
 {
-	unsigned long total_ram = lmb_phys_mem_size();
-	phys_addr_t top_of_ram = lmb_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
+	phys_addr_t top_of_ram = memblock_end_of_DRAM();
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 
 #ifdef CONFIG_PPC32
@@ -327,7 +327,7 @@
 		swiotlb_init(1);
 #endif
 
-	num_physpages = lmb.memory.size >> PAGE_SHIFT;
+	num_physpages = memblock.memory.size >> PAGE_SHIFT;
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
@@ -364,7 +364,7 @@
 		highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
 		for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
 			struct page *page = pfn_to_page(pfn);
-			if (lmb_is_reserved(pfn << PAGE_SHIFT))
+			if (memblock_is_reserved(pfn << PAGE_SHIFT))
 				continue;
 			ClearPageReserved(page);
 			init_page_count(page);
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/mmu_context_hash32.c linux-libre-2.6.35-gnu/arch/powerpc/mm/mmu_context_hash32.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/mmu_context_hash32.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/mmu_context_hash32.c	2010-08-01 18:11:14.000000000 -0400
@@ -60,11 +60,7 @@
 static unsigned long next_mmu_context;
 static unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
 
-
-/*
- * Set up the context for a new address space.
- */
-int init_new_context(struct task_struct *t, struct mm_struct *mm)
+unsigned long __init_new_context(void)
 {
 	unsigned long ctx = next_mmu_context;
 
@@ -74,19 +70,38 @@
 			ctx = 0;
 	}
 	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
-	mm->context.id = ctx;
+
+	return ctx;
+}
+EXPORT_SYMBOL_GPL(__init_new_context);
+
+/*
+ * Set up the context for a new address space.
+ */
+int init_new_context(struct task_struct *t, struct mm_struct *mm)
+{
+	mm->context.id = __init_new_context();
 
 	return 0;
 }
 
 /*
+ * Free a context ID. Make sure to call this with preempt disabled!
+ */
+void __destroy_context(unsigned long ctx)
+{
+	clear_bit(ctx, context_map);
+}
+EXPORT_SYMBOL_GPL(__destroy_context);
+
+/*
  * We're finished using the context for an address space.
  */
 void destroy_context(struct mm_struct *mm)
 {
 	preempt_disable();
 	if (mm->context.id != NO_CONTEXT) {
-		clear_bit(mm->context.id, context_map);
+		__destroy_context(mm->context.id);
 		mm->context.id = NO_CONTEXT;
 	}
 	preempt_enable();
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/mmu_context_nohash.c linux-libre-2.6.35-gnu/arch/powerpc/mm/mmu_context_nohash.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/mmu_context_nohash.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/mmu_context_nohash.c	2010-08-01 18:11:14.000000000 -0400
@@ -395,10 +395,18 @@
 	 * the PID/TID comparison is disabled, so we can use a TID of zero
 	 * to represent all kernel pages as shared among all contexts.
 	 * 	-- Dan
+	 *
+	 * The IBM 47x core supports 16-bit PIDs, thus 65535 contexts. We
+	 * should normally never have to steal though the facility is
+	 * present if needed.
+	 *      -- BenH
 	 */
 	if (mmu_has_feature(MMU_FTR_TYPE_8xx)) {
 		first_context = 0;
 		last_context = 15;
+	} else if (mmu_has_feature(MMU_FTR_TYPE_47x)) {
+		first_context = 1;
+		last_context = 65535;
 	} else {
 		first_context = 1;
 		last_context = 255;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/mmu_decl.h linux-libre-2.6.35-gnu/arch/powerpc/mm/mmu_decl.h
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/mmu_decl.h	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/mmu_decl.h	2010-08-01 18:11:14.000000000 -0400
@@ -69,12 +69,7 @@
 }
 #endif /* CONIFG_8xx */
 
-/*
- * As of today, we don't support tlbivax broadcast on any
- * implementation. When that becomes the case, this will be
- * an extern.
- */
-#ifdef CONFIG_PPC_BOOK3E
+#if defined(CONFIG_PPC_BOOK3E) || defined(CONFIG_PPC_47x)
 extern void _tlbivax_bcast(unsigned long address, unsigned int pid,
 			   unsigned int tsize, unsigned int ind);
 #else
@@ -149,7 +144,15 @@
 extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(unsigned long top);
 extern void adjust_total_lowmem(void);
+extern void loadcam_entry(unsigned int index);
 
+struct tlbcam {
+	u32	MAS0;
+	u32	MAS1;
+	unsigned long	MAS2;
+	u32	MAS3;
+	u32	MAS7;
+};
 #elif defined(CONFIG_PPC32)
 /* anything 32-bit except 4xx or 8xx */
 extern void MMU_init_hw(void);
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/numa.c linux-libre-2.6.35-gnu/arch/powerpc/mm/numa.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/numa.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/numa.c	2010-08-01 18:11:14.000000000 -0400
@@ -17,7 +17,7 @@
 #include <linux/nodemask.h>
 #include <linux/cpu.h>
 #include <linux/notifier.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/pfn.h>
 #include <asm/sparsemem.h>
@@ -33,16 +33,41 @@
 #define dbg(args...) if (numa_debug) { printk(KERN_INFO args); }
 
 int numa_cpu_lookup_table[NR_CPUS];
-cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES];
+cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
 struct pglist_data *node_data[MAX_NUMNODES];
 
 EXPORT_SYMBOL(numa_cpu_lookup_table);
-EXPORT_SYMBOL(numa_cpumask_lookup_table);
+EXPORT_SYMBOL(node_to_cpumask_map);
 EXPORT_SYMBOL(node_data);
 
 static int min_common_depth;
 static int n_mem_addr_cells, n_mem_size_cells;
 
+/*
+ * Allocate node_to_cpumask_map based on number of available nodes
+ * Requires node_possible_map to be valid.
+ *
+ * Note: node_to_cpumask() is not valid until after this is done.
+ */
+static void __init setup_node_to_cpumask_map(void)
+{
+	unsigned int node, num = 0;
+
+	/* setup nr_node_ids if not done yet */
+	if (nr_node_ids == MAX_NUMNODES) {
+		for_each_node_mask(node, node_possible_map)
+			num = node;
+		nr_node_ids = num + 1;
+	}
+
+	/* allocate the map */
+	for (node = 0; node < nr_node_ids; node++)
+		alloc_bootmem_cpumask_var(&node_to_cpumask_map[node]);
+
+	/* cpumask_of_node() will now work */
+	dbg("Node to cpumask map for %d nodes\n", nr_node_ids);
+}
+
 static int __cpuinit fake_numa_create_new_node(unsigned long end_pfn,
 						unsigned int *nid)
 {
@@ -138,8 +163,8 @@
 
 	dbg("adding cpu %d to node %d\n", cpu, node);
 
-	if (!(cpu_isset(cpu, numa_cpumask_lookup_table[node])))
-		cpu_set(cpu, numa_cpumask_lookup_table[node]);
+	if (!(cpumask_test_cpu(cpu, node_to_cpumask_map[node])))
+		cpumask_set_cpu(cpu, node_to_cpumask_map[node]);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -149,8 +174,8 @@
 
 	dbg("removing cpu %lu from node %d\n", cpu, node);
 
-	if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) {
-		cpu_clear(cpu, numa_cpumask_lookup_table[node]);
+	if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) {
+		cpumask_set_cpu(cpu, node_to_cpumask_map[node]);
 	} else {
 		printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n",
 		       cpu, node);
@@ -246,7 +271,8 @@
 	const unsigned int *ref_points;
 	struct device_node *rtas_root;
 	unsigned int len;
-	struct device_node *options;
+	struct device_node *chosen;
+	const char *vec5;
 
 	rtas_root = of_find_node_by_path("/rtas");
 
@@ -264,14 +290,17 @@
 			"ibm,associativity-reference-points", &len);
 
 	/*
-	 * For type 1 affinity information we want the first field
+	 * For form 1 affinity information we want the first field
 	 */
-	options = of_find_node_by_path("/options");
-	if (options) {
-		const char *str;
-		str = of_get_property(options, "ibm,associativity-form", NULL);
-		if (str && !strcmp(str, "1"))
-                        index = 0;
+#define VEC5_AFFINITY_BYTE	5
+#define VEC5_AFFINITY		0x80
+	chosen = of_find_node_by_path("/chosen");
+	if (chosen) {
+		vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL);
+		if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) {
+			dbg("Using form 1 affinity\n");
+			index = 0;
+		}
 	}
 
 	if ((len >= 2 * sizeof(unsigned int)) && ref_points) {
@@ -322,7 +351,7 @@
 #define DRCONF_MEM_RESERVED	0x00000080
 
 /*
- * Read the next lmb list entry from the ibm,dynamic-memory property
+ * Read the next memblock list entry from the ibm,dynamic-memory property
  * and return the information in the provided of_drconf_cell structure.
  */
 static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
@@ -343,8 +372,8 @@
 /*
  * Retreive and validate the ibm,dynamic-memory property of the device tree.
  *
- * The layout of the ibm,dynamic-memory property is a number N of lmb
- * list entries followed by N lmb list entries.  Each lmb list entry
+ * The layout of the ibm,dynamic-memory property is a number N of memblock
+ * list entries followed by N memblock list entries.  Each memblock list entry
  * contains information as layed out in the of_drconf_cell struct above.
  */
 static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
@@ -511,19 +540,19 @@
 						      unsigned long size)
 {
 	/*
-	 * We use lmb_end_of_DRAM() in here instead of memory_limit because
+	 * We use memblock_end_of_DRAM() in here instead of memory_limit because
 	 * we've already adjusted it for the limit and it takes care of
 	 * having memory holes below the limit.  Also, in the case of
 	 * iommu_is_off, memory_limit is not set but is implicitly enforced.
 	 */
 
-	if (start + size <= lmb_end_of_DRAM())
+	if (start + size <= memblock_end_of_DRAM())
 		return size;
 
-	if (start >= lmb_end_of_DRAM())
+	if (start >= memblock_end_of_DRAM())
 		return 0;
 
-	return lmb_end_of_DRAM() - start;
+	return memblock_end_of_DRAM() - start;
 }
 
 /*
@@ -702,7 +731,7 @@
 	}
 
 	/*
-	 * Now do the same thing for each LMB listed in the ibm,dynamic-memory
+	 * Now do the same thing for each MEMBLOCK listed in the ibm,dynamic-memory
 	 * property in the ibm,dynamic-reconfiguration-memory node.
 	 */
 	memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
@@ -714,8 +743,8 @@
 
 static void __init setup_nonnuma(void)
 {
-	unsigned long top_of_ram = lmb_end_of_DRAM();
-	unsigned long total_ram = lmb_phys_mem_size();
+	unsigned long top_of_ram = memblock_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
 	unsigned long start_pfn, end_pfn;
 	unsigned int i, nid = 0;
 
@@ -724,9 +753,9 @@
 	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
 	       (top_of_ram - total_ram) >> 20);
 
-	for (i = 0; i < lmb.memory.cnt; ++i) {
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+	for (i = 0; i < memblock.memory.cnt; ++i) {
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 
 		fake_numa_create_new_node(end_pfn, &nid);
 		add_active_range(nid, start_pfn, end_pfn);
@@ -750,8 +779,9 @@
 		 * If we used a CPU iterator here we would miss printing
 		 * the holes in the cpumap.
 		 */
-		for (cpu = 0; cpu < NR_CPUS; cpu++) {
-			if (cpu_isset(cpu, numa_cpumask_lookup_table[node])) {
+		for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
+			if (cpumask_test_cpu(cpu,
+					node_to_cpumask_map[node])) {
 				if (count == 0)
 					printk(" %u", cpu);
 				++count;
@@ -763,7 +793,7 @@
 		}
 
 		if (count > 1)
-			printk("-%u", NR_CPUS - 1);
+			printk("-%u", nr_cpu_ids - 1);
 		printk("\n");
 	}
 }
@@ -783,7 +813,7 @@
 
 		count = 0;
 
-		for (i = 0; i < lmb_end_of_DRAM();
+		for (i = 0; i < memblock_end_of_DRAM();
 		     i += (1 << SECTION_SIZE_BITS)) {
 			if (early_pfn_to_nid(i >> PAGE_SHIFT) == node) {
 				if (count == 0)
@@ -803,7 +833,7 @@
 }
 
 /*
- * Allocate some memory, satisfying the lmb or bootmem allocator where
+ * Allocate some memory, satisfying the memblock or bootmem allocator where
  * required. nid is the preferred node and end is the physical address of
  * the highest address in the node.
  *
@@ -817,11 +847,11 @@
 	int new_nid;
 	unsigned long ret_paddr;
 
-	ret_paddr = __lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT);
+	ret_paddr = __memblock_alloc_base(size, align, end_pfn << PAGE_SHIFT);
 
 	/* retry over all memory */
 	if (!ret_paddr)
-		ret_paddr = __lmb_alloc_base(size, align, lmb_end_of_DRAM());
+		ret_paddr = __memblock_alloc_base(size, align, memblock_end_of_DRAM());
 
 	if (!ret_paddr)
 		panic("numa.c: cannot allocate %lu bytes for node %d",
@@ -831,14 +861,14 @@
 
 	/*
 	 * We initialize the nodes in numeric order: 0, 1, 2...
-	 * and hand over control from the LMB allocator to the
+	 * and hand over control from the MEMBLOCK allocator to the
 	 * bootmem allocator.  If this function is called for
 	 * node 5, then we know that all nodes <5 are using the
-	 * bootmem allocator instead of the LMB allocator.
+	 * bootmem allocator instead of the MEMBLOCK allocator.
 	 *
 	 * So, check the nid from which this allocation came
 	 * and double check to see if we need to use bootmem
-	 * instead of the LMB.  We don't free the LMB memory
+	 * instead of the MEMBLOCK.  We don't free the MEMBLOCK memory
 	 * since it would be useless.
 	 */
 	new_nid = early_pfn_to_nid(ret_paddr >> PAGE_SHIFT);
@@ -863,9 +893,9 @@
 	struct pglist_data *node = NODE_DATA(nid);
 	int i;
 
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long physbase = lmb.reserved.region[i].base;
-		unsigned long size = lmb.reserved.region[i].size;
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long physbase = memblock.reserved.region[i].base;
+		unsigned long size = memblock.reserved.region[i].size;
 		unsigned long start_pfn = physbase >> PAGE_SHIFT;
 		unsigned long end_pfn = PFN_UP(physbase + size);
 		struct node_active_region node_ar;
@@ -873,7 +903,7 @@
 					     node->node_spanned_pages;
 
 		/*
-		 * Check to make sure that this lmb.reserved area is
+		 * Check to make sure that this memblock.reserved area is
 		 * within the bounds of the node that we care about.
 		 * Checking the nid of the start and end points is not
 		 * sufficient because the reserved area could span the
@@ -931,7 +961,7 @@
 	int nid;
 
 	min_low_pfn = 0;
-	max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_low_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	max_pfn = max_low_pfn;
 
 	if (parse_numa_properties())
@@ -939,10 +969,6 @@
 	else
 		dump_numa_memory_topology();
 
-	register_cpu_notifier(&ppc64_numa_nb);
-	cpu_numa_callback(&ppc64_numa_nb, CPU_UP_PREPARE,
-			  (void *)(unsigned long)boot_cpuid);
-
 	for_each_online_node(nid) {
 		unsigned long start_pfn, end_pfn;
 		void *bootmem_vaddr;
@@ -996,13 +1022,23 @@
 	}
 
 	init_bootmem_done = 1;
+
+	/*
+	 * Now bootmem is initialised we can create the node to cpumask
+	 * lookup tables and setup the cpu callback to populate them.
+	 */
+	setup_node_to_cpumask_map();
+
+	register_cpu_notifier(&ppc64_numa_nb);
+	cpu_numa_callback(&ppc64_numa_nb, CPU_UP_PREPARE,
+			  (void *)(unsigned long)boot_cpuid);
 }
 
 void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-	max_zone_pfns[ZONE_DMA] = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_zone_pfns[ZONE_DMA] = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	free_area_init_nodes(max_zone_pfns);
 }
 
@@ -1077,7 +1113,7 @@
 /*
  * Find the node associated with a hot added memory section for memory
  * represented in the device tree as a node (i.e. memory@XXXX) for
- * each lmb.
+ * each memblock.
  */
 int hot_add_node_scn_to_nid(unsigned long scn_addr)
 {
@@ -1118,8 +1154,8 @@
 
 /*
  * Find the node associated with a hot added memory section.  Section
- * corresponds to a SPARSEMEM section, not an LMB.  It is assumed that
- * sections are fully contained within a single LMB.
+ * corresponds to a SPARSEMEM section, not an MEMBLOCK.  It is assumed that
+ * sections are fully contained within a single MEMBLOCK.
  */
 int hot_add_scn_to_nid(unsigned long scn_addr)
 {
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/pgtable_32.c linux-libre-2.6.35-gnu/arch/powerpc/mm/pgtable_32.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/pgtable_32.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/pgtable_32.c	2010-08-01 18:11:14.000000000 -0400
@@ -26,7 +26,7 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/pgtable.h>
@@ -115,11 +115,7 @@
 {
 	struct page *ptepage;
 
-#ifdef CONFIG_HIGHPTE
-	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT | __GFP_ZERO;
-#else
 	gfp_t flags = GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO;
-#endif
 
 	ptepage = alloc_pages(flags, 0);
 	if (!ptepage)
@@ -146,6 +142,14 @@
 	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
 	flags &= ~(_PAGE_USER | _PAGE_EXEC);
 
+#ifdef _PAGE_BAP_SR
+	/* _PAGE_USER contains _PAGE_BAP_SR on BookE using the new PTE format
+	 * which means that we just cleared supervisor access... oops ;-) This
+	 * restores it
+	 */
+	flags |= _PAGE_BAP_SR;
+#endif
+
 	return __ioremap_caller(addr, size, flags, __builtin_return_address(0));
 }
 EXPORT_SYMBOL(ioremap_flags);
@@ -194,7 +198,7 @@
 	 * mem_init() sets high_memory so only do the check after that.
 	 */
 	if (mem_init_done && (p < virt_to_phys(high_memory)) &&
-	    !(__allow_ioremap_reserved && lmb_is_region_reserved(p, size))) {
+	    !(__allow_ioremap_reserved && memblock_is_region_reserved(p, size))) {
 		printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n",
 		       (unsigned long long)p, __builtin_return_address(0));
 		return NULL;
@@ -327,7 +331,7 @@
 		s = mmu_mapin_ram(top);
 		__mapin_ram_chunk(s, top);
 
-		top = lmb_end_of_DRAM();
+		top = memblock_end_of_DRAM();
 		s = wii_mmu_mapin_mem2(top);
 		__mapin_ram_chunk(s, top);
 	}
@@ -385,11 +389,7 @@
 		return -EINVAL;
 	__set_pte_at(&init_mm, address, kpte, mk_pte(page, prot), 0);
 	wmb();
-#ifdef CONFIG_PPC_STD_MMU
-	flush_hash_pages(0, address, pmd_val(*kpmd), 1);
-#else
 	flush_tlb_page(NULL, address);
-#endif
 	pte_unmap(kpte);
 
 	return 0;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/pgtable_64.c linux-libre-2.6.35-gnu/arch/powerpc/mm/pgtable_64.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/pgtable_64.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/pgtable_64.c	2010-08-01 18:11:14.000000000 -0400
@@ -34,7 +34,7 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/pgalloc.h>
@@ -67,7 +67,7 @@
 	if (init_bootmem_done)
 		pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS));
 	else
-		pt = __va(lmb_alloc_base(size, size,
+		pt = __va(memblock_alloc_base(size, size,
 					 __pa(MAX_DMA_ADDRESS)));
 	memset(pt, 0, size);
 
@@ -265,6 +265,14 @@
 	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
 	flags &= ~(_PAGE_USER | _PAGE_EXEC);
 
+#ifdef _PAGE_BAP_SR
+	/* _PAGE_USER contains _PAGE_BAP_SR on BookE using the new PTE format
+	 * which means that we just cleared supervisor access... oops ;-) This
+	 * restores it
+	 */
+	flags |= _PAGE_BAP_SR;
+#endif
+
 	if (ppc_md.ioremap)
 		return ppc_md.ioremap(addr, size, flags, caller);
 	return __ioremap_caller(addr, size, flags, caller);
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/ppc_mmu_32.c linux-libre-2.6.35-gnu/arch/powerpc/mm/ppc_mmu_32.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/ppc_mmu_32.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/ppc_mmu_32.c	2010-08-01 18:11:14.000000000 -0400
@@ -26,7 +26,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/mmu.h>
@@ -223,7 +223,7 @@
 	 * Find some memory for the hash table.
 	 */
 	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
-	Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
+	Hash = __va(memblock_alloc_base(Hash_size, Hash_size,
 				   __initial_memory_limit_addr));
 	cacheable_memzero(Hash, Hash_size);
 	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/stab.c linux-libre-2.6.35-gnu/arch/powerpc/mm/stab.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/stab.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/stab.c	2010-08-01 18:11:14.000000000 -0400
@@ -12,7 +12,7 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
@@ -252,7 +252,7 @@
 		if (cpu == 0)
 			continue; /* stab for CPU 0 is statically allocated */
 
-		newstab = lmb_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
+		newstab = memblock_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
 					 1<<SID_SHIFT);
 		newstab = (unsigned long)__va(newstab);
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/tlb_nohash.c linux-libre-2.6.35-gnu/arch/powerpc/mm/tlb_nohash.c
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/tlb_nohash.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/tlb_nohash.c	2010-08-01 18:11:14.000000000 -0400
@@ -34,7 +34,7 @@
 #include <linux/pagemap.h>
 #include <linux/preempt.h>
 #include <linux/spinlock.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
@@ -426,7 +426,7 @@
 	/* Set the global containing the top of the linear mapping
 	 * for use by the TLB miss code
 	 */
-	linear_map_top = lmb_end_of_DRAM();
+	linear_map_top = memblock_end_of_DRAM();
 
 	/* A sync won't hurt us after mucking around with
 	 * the MMU configuration
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/mm/tlb_nohash_low.S linux-libre-2.6.35-gnu/arch/powerpc/mm/tlb_nohash_low.S
--- linux-libre-2.6.34-gnu/arch/powerpc/mm/tlb_nohash_low.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/mm/tlb_nohash_low.S	2010-08-01 18:11:14.000000000 -0400
@@ -10,7 +10,7 @@
  *	- tlbil_va
  *	- tlbil_pid
  *	- tlbil_all
- *	- tlbivax_bcast (not yet)
+ *	- tlbivax_bcast
  *
  * Code mostly moved over from misc_32.S
  *
@@ -33,6 +33,7 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/processor.h>
+#include <asm/bug.h>
 
 #if defined(CONFIG_40x)
 
@@ -65,7 +66,7 @@
  * Nothing to do for 8xx, everything is inline
  */
 
-#elif defined(CONFIG_44x)
+#elif defined(CONFIG_44x) /* Includes 47x */
 
 /*
  * 440 implementation uses tlbsx/we for tlbil_va and a full sweep
@@ -73,7 +74,13 @@
  */
 _GLOBAL(__tlbil_va)
 	mfspr	r5,SPRN_MMUCR
-	rlwimi	r5,r4,0,24,31			/* Set TID */
+	mfmsr   r10
+
+	/*
+	 * We write 16 bits of STID since 47x supports that much, we
+	 * will never be passed out of bounds values on 440 (hopefully)
+	 */
+	rlwimi  r5,r4,0,16,31
 
 	/* We have to run the search with interrupts disabled, otherwise
 	 * an interrupt which causes a TLB miss can clobber the MMUCR
@@ -83,24 +90,41 @@
 	 * and restoring MMUCR, so only normal interrupts have to be
 	 * taken care of.
 	 */
-	mfmsr	r4
 	wrteei	0
 	mtspr	SPRN_MMUCR,r5
-	tlbsx.	r3, 0, r3
-	wrtee	r4
-	bne	1f
+	tlbsx.	r6,0,r3
+	bne	10f
 	sync
-	/* There are only 64 TLB entries, so r3 < 64,
-	 * which means bit 22, is clear.  Since 22 is
-	 * the V bit in the TLB_PAGEID, loading this
+BEGIN_MMU_FTR_SECTION
+	b	2f
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
+	/* On 440 There are only 64 TLB entries, so r3 < 64, which means bit
+	 * 22, is clear.  Since 22 is the V bit in the TLB_PAGEID, loading this
 	 * value will invalidate the TLB entry.
 	 */
-	tlbwe	r3, r3, PPC44x_TLB_PAGEID
+	tlbwe	r6,r6,PPC44x_TLB_PAGEID
 	isync
-1:	blr
+10:	wrtee	r10
+	blr
+2:
+#ifdef CONFIG_PPC_47x
+	oris	r7,r6,0x8000	/* specify way explicitely */
+	clrrwi	r4,r3,12	/* get an EPN for the hashing with V = 0 */
+	ori	r4,r4,PPC47x_TLBE_SIZE
+	tlbwe   r4,r7,0		/* write it */
+	isync
+	wrtee	r10
+	blr
+#else /* CONFIG_PPC_47x */
+1:	trap
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0;
+#endif /* !CONFIG_PPC_47x */
 
 _GLOBAL(_tlbil_all)
 _GLOBAL(_tlbil_pid)
+BEGIN_MMU_FTR_SECTION
+	b	2f
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
 	li	r3,0
 	sync
 
@@ -115,6 +139,76 @@
 
 	isync
 	blr
+2:
+#ifdef CONFIG_PPC_47x
+	/* 476 variant. There's not simple way to do this, hopefully we'll
+	 * try to limit the amount of such full invalidates
+	 */
+	mfmsr	r11		/* Interrupts off */
+	wrteei	0
+	li	r3,-1		/* Current set */
+	lis	r10,tlb_47x_boltmap@h
+	ori	r10,r10,tlb_47x_boltmap@l
+	lis	r7,0x8000	/* Specify way explicitely */
+
+	b	9f		/* For each set */
+
+1:	li	r9,4		/* Number of ways */
+	li	r4,0		/* Current way */
+	li	r6,0		/* Default entry value 0 */
+	andi.	r0,r8,1		/* Check if way 0 is bolted */
+	mtctr	r9		/* Load way counter */
+	bne-	3f		/* Bolted, skip loading it */
+
+2:	/* For each way */
+	or	r5,r3,r4	/* Make way|index for tlbre */
+	rlwimi	r5,r5,16,8,15	/* Copy index into position */
+	tlbre	r6,r5,0		/* Read entry */
+3:	addis	r4,r4,0x2000	/* Next way */
+	andi.	r0,r6,PPC47x_TLB0_VALID /* Valid entry ? */
+	beq	4f		/* Nope, skip it */
+	rlwimi	r7,r5,0,1,2	/* Insert way number */
+	rlwinm	r6,r6,0,21,19	/* Clear V */
+	tlbwe   r6,r7,0		/* Write it */
+4:	bdnz	2b		/* Loop for each way */
+	srwi	r8,r8,1		/* Next boltmap bit */
+9:	cmpwi	cr1,r3,255	/* Last set done ? */
+	addi	r3,r3,1		/* Next set */
+	beq	cr1,1f		/* End of loop */
+	andi.	r0,r3,0x1f	/* Need to load a new boltmap word ? */
+	bne	1b		/* No, loop */
+	lwz	r8,0(r10)	/* Load boltmap entry */
+	addi	r10,r10,4	/* Next word */
+	b	1b		/* Then loop */
+1:	isync			/* Sync shadows */
+	wrtee	r11
+#else /* CONFIG_PPC_47x */
+1:	trap
+	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0;
+#endif /* !CONFIG_PPC_47x */
+	blr
+
+#ifdef CONFIG_PPC_47x
+/*
+ * _tlbivax_bcast is only on 47x. We don't bother doing a runtime
+ * check though, it will blow up soon enough if we mistakenly try
+ * to use it on a 440.
+ */
+_GLOBAL(_tlbivax_bcast)
+	mfspr	r5,SPRN_MMUCR
+	mfmsr	r10
+	rlwimi	r5,r4,0,16,31
+	wrteei	0
+	mtspr	SPRN_MMUCR,r5
+/*	tlbivax	0,r3 - use .long to avoid binutils deps */
+	.long 0x7c000624 | (r3 << 11)
+	isync
+	eieio
+	tlbsync
+	sync
+	wrtee	r10
+	blr
+#endif /* CONFIG_PPC_47x */
 
 #elif defined(CONFIG_FSL_BOOKE)
 /*
@@ -271,3 +365,31 @@
 #else
 #error Unsupported processor type !
 #endif
+
+#if defined(CONFIG_FSL_BOOKE)
+/*
+ * extern void loadcam_entry(unsigned int index)
+ *
+ * Load TLBCAM[index] entry in to the L2 CAM MMU
+ */
+_GLOBAL(loadcam_entry)
+	LOAD_REG_ADDR(r4, TLBCAM)
+	mulli	r5,r3,TLBCAM_SIZE
+	add	r3,r5,r4
+	lwz	r4,TLBCAM_MAS0(r3)
+	mtspr	SPRN_MAS0,r4
+	lwz	r4,TLBCAM_MAS1(r3)
+	mtspr	SPRN_MAS1,r4
+	PPC_LL	r4,TLBCAM_MAS2(r3)
+	mtspr	SPRN_MAS2,r4
+	lwz	r4,TLBCAM_MAS3(r3)
+	mtspr	SPRN_MAS3,r4
+BEGIN_MMU_FTR_SECTION
+	lwz	r4,TLBCAM_MAS7(r3)
+	mtspr	SPRN_MAS7,r4
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
+	isync
+	tlbwe
+	isync
+	blr
+#endif
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/oprofile/op_model_cell.c linux-libre-2.6.35-gnu/arch/powerpc/oprofile/op_model_cell.c
--- linux-libre-2.6.34-gnu/arch/powerpc/oprofile/op_model_cell.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/oprofile/op_model_cell.c	2010-08-01 18:11:14.000000000 -0400
@@ -1077,7 +1077,7 @@
 		index = ENTRIES-1;
 
 	/* make sure index is valid */
-	if ((index > ENTRIES) || (index < 0))
+	if ((index >= ENTRIES) || (index < 0))
 		index = ENTRIES-1;
 
 	return initial_lfsr[index];
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/44x/iss4xx.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/44x/iss4xx.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/44x/iss4xx.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/44x/iss4xx.c	2010-08-01 18:11:14.000000000 -0400
@@ -0,0 +1,167 @@
+/*
+ * PPC476 board specific routines
+ *
+ * Copyright 2010 Torez Smith, IBM Corporation.
+ *
+ * Based on earlier code:
+ *    Matt Porter <mporter@kernel.crashing.org>
+ *    Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *    Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *    Copyright (c) 2003-2005 Zultys Technologies
+ *
+ *    Rewritten and ported to the merged powerpc tree:
+ *    Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+static __initdata struct of_device_id iss4xx_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,plb6", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+static int __init iss4xx_device_probe(void)
+{
+	of_platform_bus_probe(NULL, iss4xx_of_bus, NULL);
+	of_instantiate_rtc();
+
+	return 0;
+}
+machine_device_initcall(iss4xx, iss4xx_device_probe);
+
+/* We can have either UICs or MPICs */
+static void __init iss4xx_init_irq(void)
+{
+	struct device_node *np;
+
+	/* Find top level interrupt controller */
+	for_each_node_with_property(np, "interrupt-controller") {
+		if (of_get_property(np, "interrupts", NULL) == NULL)
+			break;
+	}
+	if (np == NULL)
+		panic("Can't find top level interrupt controller");
+
+	/* Check type and do appropriate initialization */
+	if (of_device_is_compatible(np, "ibm,uic")) {
+		uic_init_tree();
+		ppc_md.get_irq = uic_get_irq;
+#ifdef CONFIG_MPIC
+	} else if (of_device_is_compatible(np, "chrp,open-pic")) {
+		/* The MPIC driver will get everything it needs from the
+		 * device-tree, just pass 0 to all arguments
+		 */
+		struct mpic *mpic = mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0,
+					       " MPIC     ");
+		BUG_ON(mpic == NULL);
+		mpic_init(mpic);
+		ppc_md.get_irq = mpic_get_irq;
+#endif
+	} else
+		panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void __cpuinit smp_iss4xx_setup_cpu(int cpu)
+{
+	mpic_setup_this_cpu();
+}
+
+static void __cpuinit smp_iss4xx_kick_cpu(int cpu)
+{
+	struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+	const u64 *spin_table_addr_prop;
+	u32 *spin_table;
+	extern void start_secondary_47x(void);
+
+	BUG_ON(cpunode == NULL);
+
+	/* Assume spin table. We could test for the enable-method in
+	 * the device-tree but currently there's little point as it's
+	 * our only supported method
+	 */
+	spin_table_addr_prop = of_get_property(cpunode, "cpu-release-addr",
+					       NULL);
+	if (spin_table_addr_prop == NULL) {
+		pr_err("CPU%d: Can't start, missing cpu-release-addr !\n", cpu);
+		return;
+	}
+
+	/* Assume it's mapped as part of the linear mapping. This is a bit
+	 * fishy but will work fine for now
+	 */
+	spin_table = (u32 *)__va(*spin_table_addr_prop);
+	pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+	spin_table[3] = cpu;
+	smp_wmb();
+	spin_table[1] = __pa(start_secondary_47x);
+	mb();
+}
+
+static struct smp_ops_t iss_smp_ops = {
+	.probe		= smp_mpic_probe,
+	.message_pass	= smp_mpic_message_pass,
+	.setup_cpu	= smp_iss4xx_setup_cpu,
+	.kick_cpu	= smp_iss4xx_kick_cpu,
+	.give_timebase	= smp_generic_give_timebase,
+	.take_timebase	= smp_generic_take_timebase,
+};
+
+static void __init iss4xx_smp_init(void)
+{
+	if (mmu_has_feature(MMU_FTR_TYPE_47x))
+		smp_ops = &iss_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init iss4xx_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init iss4xx_setup_arch(void)
+{
+	iss4xx_smp_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init iss4xx_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "ibm,iss-4xx"))
+		return 0;
+
+	return 1;
+}
+
+define_machine(iss4xx) {
+	.name			= "ISS-4xx",
+	.probe			= iss4xx_probe,
+	.progress		= udbg_progress,
+	.init_IRQ		= iss4xx_init_irq,
+	.setup_arch		= iss4xx_setup_arch,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/44x/Kconfig linux-libre-2.6.35-gnu/arch/powerpc/platforms/44x/Kconfig
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/44x/Kconfig	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/44x/Kconfig	2010-08-01 18:11:14.000000000 -0400
@@ -1,3 +1,12 @@
+config PPC_47x
+	bool "Support for 47x variant"
+	depends on 44x
+	default n
+	select MPIC
+	help
+	  This option enables support for the 47x family of processors and is
+	  not currently compatible with other 44x or 46x varients
+
 config BAMBOO
 	bool "Bamboo"
 	depends on 44x
@@ -151,6 +160,28 @@
 	help
 	  This option enables support for the AMCC PPC440EP evaluation board.
 
+config ISS4xx
+	bool "ISS 4xx Simulator"
+	depends on (44x || 40x)
+	default n
+	select 405GP if 40x
+	select 440GP if 44x && !PPC_47x
+	select PPC_FPU
+	select OF_RTC
+	help
+	  This option enables support for the IBM ISS simulation environment
+
+config ICON
+	bool "Icon"
+	depends on 44x
+	default n
+	select PPC44x_SIMPLE
+	select 440SPe
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the AMCC PPC440SPe evaluation board.
+
 #config LUAN
 #	bool "Luan"
 #	depends on 44x
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/44x/Makefile linux-libre-2.6.35-gnu/arch/powerpc/platforms/44x/Makefile
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/44x/Makefile	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/44x/Makefile	2010-08-01 18:11:14.000000000 -0400
@@ -5,3 +5,4 @@
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
 obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
+obj-$(CONFIG_ISS4xx)	+= iss4xx.o
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/44x/ppc44x_simple.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/44x/ppc44x_simple.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/44x/ppc44x_simple.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/44x/ppc44x_simple.c	2010-08-01 18:11:14.000000000 -0400
@@ -61,7 +61,8 @@
 	"amcc,redwood",
 	"amcc,sequoia",
 	"amcc,taishan",
-	"amcc,yosemite"
+	"amcc,yosemite",
+	"mosaixtech,icon"
 };
 
 static int __init ppc44x_probe(void)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/512x/mpc512x_shared.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/512x/mpc512x_shared.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/512x/mpc512x_shared.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/512x/mpc512x_shared.c	2010-08-01 18:11:14.000000000 -0400
@@ -22,6 +22,7 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 #include <asm/mpc5121.h>
+#include <asm/mpc52xx_psc.h>
 
 #include "mpc512x.h"
 
@@ -95,9 +96,86 @@
 	}
 }
 
+#define DEFAULT_FIFO_SIZE 16
+
+static unsigned int __init get_fifo_size(struct device_node *np,
+					 char *prop_name)
+{
+	const unsigned int *fp;
+
+	fp = of_get_property(np, prop_name, NULL);
+	if (fp)
+		return *fp;
+
+	pr_warning("no %s property in %s node, defaulting to %d\n",
+		   prop_name, np->full_name, DEFAULT_FIFO_SIZE);
+
+	return DEFAULT_FIFO_SIZE;
+}
+
+#define FIFOC(_base) ((struct mpc512x_psc_fifo __iomem *) \
+		    ((u32)(_base) + sizeof(struct mpc52xx_psc)))
+
+/* Init PSC FIFO space for TX and RX slices */
+void __init mpc512x_psc_fifo_init(void)
+{
+	struct device_node *np;
+	void __iomem *psc;
+	unsigned int tx_fifo_size;
+	unsigned int rx_fifo_size;
+	int fifobase = 0; /* current fifo address in 32 bit words */
+
+	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+		tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size");
+		rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size");
+
+		/* size in register is in 4 byte units */
+		tx_fifo_size /= 4;
+		rx_fifo_size /= 4;
+		if (!tx_fifo_size)
+			tx_fifo_size = 1;
+		if (!rx_fifo_size)
+			rx_fifo_size = 1;
+
+		psc = of_iomap(np, 0);
+		if (!psc) {
+			pr_err("%s: Can't map %s device\n",
+				__func__, np->full_name);
+			continue;
+		}
+
+		/* FIFO space is 4KiB, check if requested size is available */
+		if ((fifobase + tx_fifo_size + rx_fifo_size) > 0x1000) {
+			pr_err("%s: no fifo space available for %s\n",
+				__func__, np->full_name);
+			iounmap(psc);
+			/*
+			 * chances are that another device requests less
+			 * fifo space, so we continue.
+			 */
+			continue;
+		}
+
+		/* set tx and rx fifo size registers */
+		out_be32(&FIFOC(psc)->txsz, (fifobase << 16) | tx_fifo_size);
+		fifobase += tx_fifo_size;
+		out_be32(&FIFOC(psc)->rxsz, (fifobase << 16) | rx_fifo_size);
+		fifobase += rx_fifo_size;
+
+		/* reset and enable the slices */
+		out_be32(&FIFOC(psc)->txcmd, 0x80);
+		out_be32(&FIFOC(psc)->txcmd, 0x01);
+		out_be32(&FIFOC(psc)->rxcmd, 0x80);
+		out_be32(&FIFOC(psc)->rxcmd, 0x01);
+
+		iounmap(psc);
+	}
+}
+
 void __init mpc512x_init(void)
 {
 	mpc512x_declare_of_platform_devices();
 	mpc5121_clk_init();
 	mpc512x_restart_init();
+	mpc512x_psc_fifo_init();
 }
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/52xx/mpc52xx_gpio.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/52xx/mpc52xx_gpio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/52xx/mpc52xx_gpio.c	2010-08-01 18:11:14.000000000 -0400
@@ -168,7 +168,7 @@
 	ofchip->gc.get              = mpc52xx_wkup_gpio_get;
 	ofchip->gc.set              = mpc52xx_wkup_gpio_set;
 
-	ret = of_mm_gpiochip_add(ofdev->node, &chip->mmchip);
+	ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip);
 	if (ret)
 		return ret;
 
@@ -193,8 +193,11 @@
 };
 
 static struct of_platform_driver mpc52xx_wkup_gpiochip_driver = {
-	.name = "gpio_wkup",
-	.match_table = mpc52xx_wkup_gpiochip_match,
+	.driver = {
+		.name = "gpio_wkup",
+		.owner = THIS_MODULE,
+		.of_match_table = mpc52xx_wkup_gpiochip_match,
+	},
 	.probe = mpc52xx_wkup_gpiochip_probe,
 	.remove = mpc52xx_gpiochip_remove,
 };
@@ -329,7 +332,7 @@
 	ofchip->gc.get              = mpc52xx_simple_gpio_get;
 	ofchip->gc.set              = mpc52xx_simple_gpio_set;
 
-	ret = of_mm_gpiochip_add(ofdev->node, &chip->mmchip);
+	ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip);
 	if (ret)
 		return ret;
 
@@ -349,8 +352,11 @@
 };
 
 static struct of_platform_driver mpc52xx_simple_gpiochip_driver = {
-	.name = "gpio",
-	.match_table = mpc52xx_simple_gpiochip_match,
+	.driver = {
+		.name = "gpio",
+		.owner = THIS_MODULE,
+		.of_match_table = mpc52xx_simple_gpiochip_match,
+	},
 	.probe = mpc52xx_simple_gpiochip_probe,
 	.remove = mpc52xx_gpiochip_remove,
 };
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/52xx/mpc52xx_gpt.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/52xx/mpc52xx_gpt.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/52xx/mpc52xx_gpt.c	2010-08-01 18:11:14.000000000 -0400
@@ -734,8 +734,8 @@
 
 	spin_lock_init(&gpt->lock);
 	gpt->dev = &ofdev->dev;
-	gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->node);
-	gpt->regs = of_iomap(ofdev->node, 0);
+	gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
+	gpt->regs = of_iomap(ofdev->dev.of_node, 0);
 	if (!gpt->regs) {
 		kfree(gpt);
 		return -ENOMEM;
@@ -743,21 +743,21 @@
 
 	dev_set_drvdata(&ofdev->dev, gpt);
 
-	mpc52xx_gpt_gpio_setup(gpt, ofdev->node);
-	mpc52xx_gpt_irq_setup(gpt, ofdev->node);
+	mpc52xx_gpt_gpio_setup(gpt, ofdev->dev.of_node);
+	mpc52xx_gpt_irq_setup(gpt, ofdev->dev.of_node);
 
 	mutex_lock(&mpc52xx_gpt_list_mutex);
 	list_add(&gpt->list, &mpc52xx_gpt_list);
 	mutex_unlock(&mpc52xx_gpt_list_mutex);
 
 	/* check if this device could be a watchdog */
-	if (of_get_property(ofdev->node, "fsl,has-wdt", NULL) ||
-	    of_get_property(ofdev->node, "has-wdt", NULL)) {
+	if (of_get_property(ofdev->dev.of_node, "fsl,has-wdt", NULL) ||
+	    of_get_property(ofdev->dev.of_node, "has-wdt", NULL)) {
 		const u32 *on_boot_wdt;
 
 		gpt->wdt_mode = MPC52xx_GPT_CAN_WDT;
-		on_boot_wdt = of_get_property(ofdev->node, "fsl,wdt-on-boot",
-					      NULL);
+		on_boot_wdt = of_get_property(ofdev->dev.of_node,
+					      "fsl,wdt-on-boot", NULL);
 		if (on_boot_wdt) {
 			dev_info(gpt->dev, "used as watchdog\n");
 			gpt->wdt_mode |= MPC52xx_GPT_IS_WDT;
@@ -784,8 +784,11 @@
 };
 
 static struct of_platform_driver mpc52xx_gpt_driver = {
-	.name = "mpc52xx-gpt",
-	.match_table = mpc52xx_gpt_match,
+	.driver = {
+		.name = "mpc52xx-gpt",
+		.owner = THIS_MODULE,
+		.of_match_table = mpc52xx_gpt_match,
+	},
 	.probe = mpc52xx_gpt_probe,
 	.remove = mpc52xx_gpt_remove,
 };
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c	2010-08-01 18:11:14.000000000 -0400
@@ -445,14 +445,14 @@
 	if (lpbfifo.dev != NULL)
 		return -ENOSPC;
 
-	lpbfifo.irq = irq_of_parse_and_map(op->node, 0);
+	lpbfifo.irq = irq_of_parse_and_map(op->dev.of_node, 0);
 	if (!lpbfifo.irq)
 		return -ENODEV;
 
-	if (of_address_to_resource(op->node, 0, &res))
+	if (of_address_to_resource(op->dev.of_node, 0, &res))
 		return -ENODEV;
 	lpbfifo.regs_phys = res.start;
-	lpbfifo.regs = of_iomap(op->node, 0);
+	lpbfifo.regs = of_iomap(op->dev.of_node, 0);
 	if (!lpbfifo.regs)
 		return -ENOMEM;
 
@@ -537,9 +537,11 @@
 };
 
 static struct of_platform_driver mpc52xx_lpbfifo_driver = {
-	.owner = THIS_MODULE,
-	.name = "mpc52xx-lpbfifo",
-	.match_table = mpc52xx_lpbfifo_match,
+	.driver = {
+		.name = "mpc52xx-lpbfifo",
+		.owner = THIS_MODULE,
+		.of_match_table = mpc52xx_lpbfifo_match,
+	},
 	.probe = mpc52xx_lpbfifo_probe,
 	.remove = __devexit_p(mpc52xx_lpbfifo_remove),
 };
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/52xx/mpc52xx_pm.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/52xx/mpc52xx_pm.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/52xx/mpc52xx_pm.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/52xx/mpc52xx_pm.c	2010-08-01 18:11:14.000000000 -0400
@@ -64,10 +64,19 @@
 		{ .type = "builtin", .compatible = "mpc5200", }, /* efika */
 		{}
 	};
+	struct resource res;
 
 	/* map the whole register space */
 	np = of_find_matching_node(NULL, immr_ids);
-	mbar = of_iomap(np, 0);
+
+	if (of_address_to_resource(np, 0, &res)) {
+		pr_err("mpc52xx_pm_prepare(): could not get IMMR address\n");
+		of_node_put(np);
+		return -ENOSYS;
+	}
+
+	mbar = ioremap(res.start, 0xc000); /* we should map whole region including SRAM */
+
 	of_node_put(np);
 	if (!mbar) {
 		pr_err("mpc52xx_pm_prepare(): could not map registers\n");
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/82xx/ep8248e.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/82xx/ep8248e.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/82xx/ep8248e.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/82xx/ep8248e.c	2010-08-01 18:11:14.000000000 -0400
@@ -119,12 +119,12 @@
 	struct device_node *node;
 	int ret;
 
-	node = of_get_parent(ofdev->node);
+	node = of_get_parent(ofdev->dev.of_node);
 	of_node_put(node);
 	if (node != ep8248e_bcsr_node)
 		return -ENODEV;
 
-	ret = of_address_to_resource(ofdev->node, 0, &res);
+	ret = of_address_to_resource(ofdev->dev.of_node, 0, &res);
 	if (ret)
 		return ret;
 
@@ -142,7 +142,7 @@
 	bus->parent = &ofdev->dev;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
 
-	ret = of_mdiobus_register(bus, ofdev->node);
+	ret = of_mdiobus_register(bus, ofdev->dev.of_node);
 	if (ret)
 		goto err_free_irq;
 
@@ -170,8 +170,9 @@
 static struct of_platform_driver ep8248e_mdio_driver = {
 	.driver = {
 		.name = "ep8248e-mdio-bitbang",
+		.owner = THIS_MODULE,
+		.of_match_table = ep8248e_mdio_match,
 	},
-	.match_table = ep8248e_mdio_match,
 	.probe = ep8248e_mdio_probe,
 	.remove = ep8248e_mdio_remove,
 };
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/83xx/mpc831x_rdb.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/83xx/mpc831x_rdb.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/83xx/mpc831x_rdb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/83xx/mpc831x_rdb.c	2010-08-01 18:11:14.000000000 -0400
@@ -74,6 +74,7 @@
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .compatible = "simple-bus" },
 	{ .compatible = "gianfar" },
+	{ .compatible = "gpio-leds", },
 	{},
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/83xx/mpc837x_rdb.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/83xx/mpc837x_rdb.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/83xx/mpc837x_rdb.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/83xx/mpc837x_rdb.c	2010-08-01 18:11:14.000000000 -0400
@@ -72,6 +72,7 @@
 	{ .compatible = "soc", },
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },
+	{ .compatible = "gpio-leds", },
 	{},
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/83xx/suspend.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/83xx/suspend.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/83xx/suspend.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/83xx/suspend.c	2010-08-01 18:11:14.000000000 -0400
@@ -321,7 +321,7 @@
 static int pmc_probe(struct of_device *ofdev,
                      const struct of_device_id *match)
 {
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 	struct resource res;
 	struct pmc_type *type = match->data;
 	int ret = 0;
@@ -423,8 +423,11 @@
 };
 
 static struct of_platform_driver pmc_driver = {
-	.name = "mpc83xx-pmc",
-	.match_table = pmc_match,
+	.driver = {
+		.name = "mpc83xx-pmc",
+		.owner = THIS_MODULE,
+		.of_match_table = pmc_match,
+	},
 	.probe = pmc_probe,
 	.remove = pmc_remove
 };
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/85xx/corenet_ds.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/85xx/corenet_ds.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/85xx/corenet_ds.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/85xx/corenet_ds.c	2010-08-01 18:11:14.000000000 -0400
@@ -16,7 +16,7 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -100,7 +100,7 @@
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/85xx/mpc8536_ds.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/85xx/mpc8536_ds.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/85xx/mpc8536_ds.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/85xx/mpc8536_ds.c	2010-08-01 18:11:14.000000000 -0400
@@ -17,7 +17,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -94,7 +94,7 @@
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/85xx/mpc85xx_ds.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/85xx/mpc85xx_ds.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/85xx/mpc85xx_ds.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/85xx/mpc85xx_ds.c	2010-08-01 18:11:14.000000000 -0400
@@ -20,7 +20,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -190,7 +190,7 @@
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/85xx/mpc85xx_mds.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/85xx/mpc85xx_mds.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/85xx/mpc85xx_mds.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/85xx/mpc85xx_mds.c	2010-08-01 18:11:14.000000000 -0400
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved.
  *
  * Author: Andy Fleming <afleming@freescale.com>
  *
@@ -33,7 +33,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
 #include <linux/phy.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -154,6 +154,10 @@
  * Setup the architecture
  *
  */
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
+
 static void __init mpc85xx_mds_setup_arch(void)
 {
 	struct device_node *np;
@@ -194,6 +198,10 @@
 	}
 #endif
 
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
 #ifdef CONFIG_QUICC_ENGINE
 	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 	if (!np) {
@@ -271,13 +279,53 @@
 						BCSR_UCC_RGMII, BCSR_UCC_RTBI);
 			}
 
+		} else if (machine_is(p1021_mds)) {
+#define BCSR11_ENET_MICRST     (0x1 << 5)
+			/* Reset Micrel PHY */
+			clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
+			setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
 		}
+
 		iounmap(bcsr_regs);
 	}
+
+	if (machine_is(p1021_mds)) {
+#define MPC85xx_PMUXCR_OFFSET           0x60
+#define MPC85xx_PMUXCR_QE0              0x00008000
+#define MPC85xx_PMUXCR_QE3              0x00001000
+#define MPC85xx_PMUXCR_QE9              0x00000040
+#define MPC85xx_PMUXCR_QE12             0x00000008
+		static __be32 __iomem *pmuxcr;
+
+		np = of_find_node_by_name(NULL, "global-utilities");
+
+		if (np) {
+			pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
+
+			if (!pmuxcr)
+				printk(KERN_EMERG "Error: Alternate function"
+					" signal multiplex control register not"
+					" mapped!\n");
+			else
+			/* P1021 has pins muxed for QE and other functions. To
+			 * enable QE UEC mode, we need to set bit QE0 for UCC1
+			 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+			 * and QE12 for QE MII management singals in PMUXCR
+			 * register.
+			 */
+				setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
+						  MPC85xx_PMUXCR_QE3 |
+						  MPC85xx_PMUXCR_QE9 |
+						  MPC85xx_PMUXCR_QE12);
+
+			of_node_put(np);
+		}
+
+	}
 #endif	/* CONFIG_QUICC_ENGINE */
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
@@ -330,6 +378,16 @@
 	{},
 };
 
+static struct of_device_id p1021_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
+	{ .compatible = "gianfar", },
+	{},
+};
+
 static int __init mpc85xx_publish_devices(void)
 {
 	if (machine_is(mpc8568_mds))
@@ -342,11 +400,22 @@
 
 	return 0;
 }
+
+static int __init p1021_publish_devices(void)
+{
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, p1021_ids, NULL);
+
+	return 0;
+}
+
 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
 machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
+machine_device_initcall(p1021_mds, p1021_publish_devices);
 
 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
+machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
 
 static void __init mpc85xx_mds_pic_init(void)
 {
@@ -366,7 +435,7 @@
 
 	mpic = mpic_alloc(np, r.start,
 			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
-			MPIC_BROKEN_FRR_NIRQS,
+			MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
 	of_node_put(np);
@@ -380,7 +449,11 @@
 		if (!np)
 			return;
 	}
-	qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
+	if (machine_is(p1021_mds))
+		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+				qe_ic_cascade_high_mpic);
+	else
+		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
 	of_node_put(np);
 #endif				/* CONFIG_QUICC_ENGINE */
 }
@@ -426,3 +499,26 @@
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 #endif
 };
+
+static int __init p1021_mds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1021MDS");
+
+}
+
+define_machine(p1021_mds) {
+	.name		= "P1021 MDS",
+	.probe		= p1021_mds_probe,
+	.setup_arch	= mpc85xx_mds_setup_arch,
+	.init_IRQ	= mpc85xx_mds_pic_init,
+	.get_irq	= mpic_get_irq,
+	.restart	= fsl_rstcr_restart,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
+
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/86xx/mpc8610_hpcd.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/86xx/mpc8610_hpcd.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/86xx/mpc8610_hpcd.c	2010-08-01 18:11:14.000000000 -0400
@@ -83,7 +83,8 @@
 	{ .compatible = "fsl,mpc8610-immr", },
 	{ .compatible = "fsl,mpc8610-guts", },
 	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
+	/* So that the DMA channel nodes can be probed individually: */
+	{ .compatible = "fsl,eloplus-dma", },
 	{}
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c	2010-08-01 18:11:14.000000000 -0400
@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -103,7 +103,7 @@
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/cell/axon_msi.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/cell/axon_msi.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/cell/axon_msi.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/cell/axon_msi.c	2010-08-01 18:11:14.000000000 -0400
@@ -345,7 +345,7 @@
 static int axon_msi_probe(struct of_device *device,
 			  const struct of_device_id *device_id)
 {
-	struct device_node *dn = device->node;
+	struct device_node *dn = device->dev.of_node;
 	struct axon_msic *msic;
 	unsigned int virq;
 	int dcr_base, dcr_len;
@@ -447,11 +447,12 @@
 };
 
 static struct of_platform_driver axon_msi_driver = {
-	.match_table	= axon_msi_device_id,
 	.probe		= axon_msi_probe,
 	.shutdown	= axon_msi_shutdown,
-	.driver		= {
-		.name	= "axon-msi"
+	.driver = {
+		.name = "axon-msi",
+		.owner = THIS_MODULE,
+		.of_match_table = axon_msi_device_id,
 	},
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/cell/cbe_cpufreq.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/cell/cbe_cpufreq.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/cell/cbe_cpufreq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/cell/cbe_cpufreq.c	2010-08-01 18:11:14.000000000 -0400
@@ -118,7 +118,7 @@
 	policy->cur = cbe_freqs[cur_pmode].frequency;
 
 #ifdef CONFIG_SMP
-	cpumask_copy(policy->cpus, &per_cpu(cpu_sibling_map, policy->cpu));
+	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
 #endif
 
 	cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu);
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/cell/iommu.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/cell/iommu.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/cell/iommu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/cell/iommu.c	2010-08-01 18:11:14.000000000 -0400
@@ -29,7 +29,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/iommu.h>
@@ -545,7 +545,6 @@
 {
 	struct iommu_window *window;
 	struct cbe_iommu *iommu;
-	struct dev_archdata *archdata = &dev->archdata;
 
 	/* Current implementation uses the first window available in that
 	 * node's iommu. We -might- do something smarter later though it may
@@ -554,7 +553,7 @@
 	iommu = cell_iommu_for_node(dev_to_node(dev));
 	if (iommu == NULL || list_empty(&iommu->windows)) {
 		printk(KERN_ERR "iommu: missing iommu for %s (node %d)\n",
-		       archdata->of_node ? archdata->of_node->full_name : "?",
+		       dev->of_node ? dev->of_node->full_name : "?",
 		       dev_to_node(dev));
 		return NULL;
 	}
@@ -846,10 +845,10 @@
 	/* If we found a DMA window, we check if it's big enough to enclose
 	 * all of physical memory. If not, we force enable IOMMU
 	 */
-	if (np && size < lmb_end_of_DRAM()) {
+	if (np && size < memblock_end_of_DRAM()) {
 		printk(KERN_WARNING "iommu: force-enabled, dma window"
 		       " (%ldMB) smaller than total memory (%lldMB)\n",
-		       size >> 20, lmb_end_of_DRAM() >> 20);
+		       size >> 20, memblock_end_of_DRAM() >> 20);
 		return -ENODEV;
 	}
 
@@ -897,7 +896,7 @@
 	const u32 *ranges = NULL;
 	int i, len, best, naddr, nsize, pna, range_size;
 
-	np = of_node_get(dev->archdata.of_node);
+	np = of_node_get(dev->of_node);
 	while (1) {
 		naddr = of_n_addr_cells(np);
 		nsize = of_n_size_cells(np);
@@ -1065,9 +1064,9 @@
 	}
 
 	fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT);
-	fsize = lmb_phys_mem_size();
+	fsize = memblock_phys_mem_size();
 
-	if ((fbase + fsize) <= 0x800000000)
+	if ((fbase + fsize) <= 0x800000000ul)
 		hbase = 0; /* use the device tree window */
 	else {
 		/* If we're over 32 GB we need to cheat. We can't map all of
@@ -1170,7 +1169,7 @@
 	 * Note: should we make sure we have the IOMMU actually disabled ?
 	 */
 	if (iommu_is_off ||
-	    (!iommu_force_on && lmb_end_of_DRAM() <= 0x80000000ull))
+	    (!iommu_force_on && memblock_end_of_DRAM() <= 0x80000000ull))
 		if (cell_iommu_init_disabled() == 0)
 			goto bail;
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/cell/spufs/file.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/cell/spufs/file.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/cell/spufs/file.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/cell/spufs/file.c	2010-08-01 18:11:14.000000000 -0400
@@ -1849,8 +1849,7 @@
 	return ret;
 }
 
-static int spufs_mfc_fsync(struct file *file, struct dentry *dentry,
-			   int datasync)
+static int spufs_mfc_fsync(struct file *file, int datasync)
 {
 	return spufs_mfc_flush(file, NULL);
 }
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/cell/spufs/inode.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/cell/spufs/inode.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/cell/spufs/inode.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/cell/spufs/inode.c	2010-08-01 18:11:14.000000000 -0400
@@ -251,7 +251,7 @@
 	.llseek		= dcache_dir_lseek,
 	.read		= generic_read_dir,
 	.readdir	= dcache_readdir,
-	.fsync		= simple_sync_file,
+	.fsync		= noop_fsync,
 };
 EXPORT_SYMBOL_GPL(spufs_context_fops);
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/embedded6xx/wii.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/embedded6xx/wii.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/embedded6xx/wii.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/embedded6xx/wii.c	2010-08-01 18:11:14.000000000 -0400
@@ -20,7 +20,7 @@
 #include <linux/seq_file.h>
 #include <linux/kexec.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <mm/mmu_decl.h>
 
 #include <asm/io.h>
@@ -65,19 +65,19 @@
 
 void __init wii_memory_fixups(void)
 {
-	struct lmb_property *p = lmb.memory.region;
+	struct memblock_property *p = memblock.memory.region;
 
 	/*
 	 * This is part of a workaround to allow the use of two
-	 * discontiguous RAM ranges on the Wii, even if this is
+	 * discontinuous RAM ranges on the Wii, even if this is
 	 * currently unsupported on 32-bit PowerPC Linux.
 	 *
-	 * We coealesce the two memory ranges of the Wii into a
+	 * We coalesce the two memory ranges of the Wii into a
 	 * single range, then create a reservation for the "hole"
 	 * between both ranges.
 	 */
 
-	BUG_ON(lmb.memory.cnt != 2);
+	BUG_ON(memblock.memory.cnt != 2);
 	BUG_ON(!page_aligned(p[0].base) || !page_aligned(p[1].base));
 
 	p[0].size = _ALIGN_DOWN(p[0].size, PAGE_SIZE);
@@ -92,11 +92,11 @@
 
 	p[0].size += wii_hole_size + p[1].size;
 
-	lmb.memory.cnt = 1;
-	lmb_analyze();
+	memblock.memory.cnt = 1;
+	memblock_analyze();
 
 	/* reserve the hole */
-	lmb_reserve(wii_hole_start, wii_hole_size);
+	memblock_reserve(wii_hole_start, wii_hole_size);
 
 	/* allow ioremapping the address space in the hole */
 	__allow_ioremap_reserved = 1;
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/iseries/exception.S linux-libre-2.6.35-gnu/arch/powerpc/platforms/iseries/exception.S
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/iseries/exception.S	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/iseries/exception.S	2010-08-01 18:11:14.000000000 -0400
@@ -252,8 +252,8 @@
 	li	r11,1
 	ld	r12,PACALPPACAPTR(r13)
 	stb	r11,LPPACADECRINT(r12)
-	LOAD_REG_IMMEDIATE(r12, tb_ticks_per_jiffy)
-	lwz	r12,0(r12)
+	li	r12,-1
+	clrldi	r12,r12,33	/* set DEC to 0x7fffffff */
 	mtspr	SPRN_DEC,r12
 	/* fall through */
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/iseries/pci.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/iseries/pci.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/iseries/pci.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/iseries/pci.c	2010-08-01 18:11:14.000000000 -0400
@@ -32,6 +32,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/of.h>
+#include <linux/ratelimit.h>
 
 #include <asm/types.h>
 #include <asm/io.h>
@@ -444,7 +445,11 @@
 	}
 
 	allocate_device_bars(pdev);
-	iseries_device_information(pdev, bus, *sub_bus);
+	if (likely(sub_bus))
+		iseries_device_information(pdev, bus, *sub_bus);
+	else
+		printk(KERN_ERR "PCI: Device node %s has missing or invalid "
+				"linux,subbus property\n", node->full_name);
 }
 
 /*
@@ -584,14 +589,9 @@
 
 	orig_addr = (unsigned long __force)addr;
 	if ((orig_addr < BASE_IO_MEMORY) || (orig_addr >= max_io_memory)) {
-		static unsigned long last_jiffies;
-		static int num_printed;
+		static DEFINE_RATELIMIT_STATE(ratelimit, 60 * HZ, 10);
 
-		if (time_after(jiffies, last_jiffies + 60 * HZ)) {
-			last_jiffies = jiffies;
-			num_printed = 0;
-		}
-		if (num_printed++ < 10)
+		if (__ratelimit(&ratelimit))
 			printk(KERN_ERR
 				"iSeries_%s: invalid access at IO address %p\n",
 				func, addr);
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/iseries/smp.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/iseries/smp.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/iseries/smp.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/iseries/smp.c	2010-08-01 18:11:14.000000000 -0400
@@ -83,7 +83,7 @@
 
 static int smp_iSeries_probe(void)
 {
-	return cpus_weight(cpu_possible_map);
+	return cpumask_weight(cpu_possible_mask);
 }
 
 static void smp_iSeries_kick_cpu(int nr)
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/Kconfig.cputype linux-libre-2.6.35-gnu/arch/powerpc/platforms/Kconfig.cputype
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/Kconfig.cputype	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/Kconfig.cputype	2010-08-01 18:11:14.000000000 -0400
@@ -43,7 +43,7 @@
 	select PPC_PCI_CHOICE
 
 config 44x
-	bool "AMCC 44x"
+	bool "AMCC 44x, 46x or 47x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
@@ -294,7 +294,7 @@
          This enables the powerpc-specific perf_event back-end.
 
 config SMP
-	depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE
+	depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE || PPC_47x
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
@@ -322,6 +322,7 @@
 config NOT_COHERENT_CACHE
 	bool
 	depends on 4xx || 8xx || E200 || PPC_MPC512x || GAMECUBE_COMMON
+	default n if PPC_47x
 	default y
 
 config CHECK_CACHE_COHERENCY
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/maple/setup.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/maple/setup.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/maple/setup.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/maple/setup.c	2010-08-01 18:11:14.000000000 -0400
@@ -41,7 +41,7 @@
 #include <linux/smp.h>
 #include <linux/bitops.h>
 #include <linux/of_device.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/sections.h>
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/pasemi/cpufreq.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/pasemi/cpufreq.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/pasemi/cpufreq.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/pasemi/cpufreq.c	2010-08-01 18:11:14.000000000 -0400
@@ -213,7 +213,7 @@
 	pr_debug("current astate is at %d\n",cur_astate);
 
 	policy->cur = pas_freqs[cur_astate].frequency;
-	cpumask_copy(policy->cpus, &cpu_online_map);
+	cpumask_copy(policy->cpus, cpu_online_mask);
 
 	ppc_proc_freq = policy->cur * 1000ul;
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/pasemi/gpio_mdio.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/pasemi/gpio_mdio.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/pasemi/gpio_mdio.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/pasemi/gpio_mdio.c	2010-08-01 18:11:14.000000000 -0400
@@ -220,7 +220,7 @@
 				     const struct of_device_id *match)
 {
 	struct device *dev = &ofdev->dev;
-	struct device_node *np = ofdev->node;
+	struct device_node *np = ofdev->dev.of_node;
 	struct mii_bus *new_bus;
 	struct gpio_priv *priv;
 	const unsigned int *prop;
@@ -301,11 +301,12 @@
 
 static struct of_platform_driver gpio_mdio_driver =
 {
-	.match_table	= gpio_mdio_match,
 	.probe		= gpio_mdio_probe,
 	.remove		= gpio_mdio_remove,
-	.driver		= {
-		.name	= "gpio-mdio-bitbang",
+	.driver = {
+		.name = "gpio-mdio-bitbang",
+		.owner = THIS_MODULE,
+		.of_match_table = gpio_mdio_match,
 	},
 };
 
diff -druN linux-libre-2.6.34-gnu/arch/powerpc/platforms/pasemi/iommu.c linux-libre-2.6.35-gnu/arch/powerpc/platforms/pasemi/iommu.c
--- linux-libre-2.6.34-gnu/arch/powerpc/platforms/pasemi/iommu.c	2010-05-16 17:17:36.000000000 -0400
+++ linux-libre-2.6.35-gnu/arch/powerpc/platforms/pasemi/iommu.c	2010-08-01 18:11:14.000000000 -0400
@@ -204,7 +204,7 @@
 	pr_debug(" -> %s\n", __func__);
 
 	/* Allocate a spare page to map all invalid IOTLB pages. */
-	tmp = lmb_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
+	tmp = memblock_alloc(IOBMAP_PAGE_SIZE, IOBMAP_PAGE_SIZE);
 	if (!tmp)
 		panic("IOBMAP: Cannot allocate spare page!");
 	/* Empty l1 is marked invalid */
@@ -275,7 +275,7 @@
 	return;
 #endif
 	/* For 2G space, 8x64 pages (2^21 bytes) is max total l2 size */
-	iob_l2