diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/boot/dts/nsimosci.dts linux-libre-3.10.38-gnu/arch/arc/boot/dts/nsimosci.dts
--- linux-libre-3.10-gnu/arch/arc/boot/dts/nsimosci.dts	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/boot/dts/nsimosci.dts	2014-04-26 20:16:33.000000000 -0400
@@ -11,13 +11,16 @@
 
 / {
 	compatible = "snps,nsimosci";
-	clock-frequency = <80000000>;	/* 80 MHZ */
+	clock-frequency = <20000000>;	/* 20 MHZ */
 	#address-cells = <1>;
 	#size-cells = <1>;
 	interrupt-parent = <&intc>;
 
 	chosen {
-		bootargs = "console=tty0 consoleblank=0";
+		/* this is for console on PGU */
+		/* bootargs = "console=tty0 consoleblank=0"; */
+		/* this is for console on serial */
+		bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=ttyS0,115200n8 consoleblank=0 debug";
 	};
 
 	aliases {
@@ -44,15 +47,14 @@
 		};
 
 		uart0: serial@c0000000 {
-			compatible = "snps,dw-apb-uart";
+			compatible = "ns8250";
 			reg = <0xc0000000 0x2000>;
 			interrupts = <11>;
-			#clock-frequency = <80000000>;
 			clock-frequency = <3686400>;
 			baud = <115200>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			status = "okay";
+			no-loopback-test = <1>;
 		};
 
 		pgu0: pgu@c9000000 {
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/configs/nsimosci_defconfig linux-libre-3.10.38-gnu/arch/arc/configs/nsimosci_defconfig
--- linux-libre-3.10-gnu/arch/arc/configs/nsimosci_defconfig	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/configs/nsimosci_defconfig	2014-04-26 20:16:33.000000000 -0400
@@ -54,6 +54,7 @@ CONFIG_SERIO_ARC_PS2=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/include/asm/delay.h linux-libre-3.10.38-gnu/arch/arc/include/asm/delay.h
--- linux-libre-3.10-gnu/arch/arc/include/asm/delay.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/include/asm/delay.h	2014-04-26 20:16:33.000000000 -0400
@@ -53,11 +53,10 @@ static inline void __udelay(unsigned lon
 {
 	unsigned long loops;
 
-	/* (long long) cast ensures 64 bit MPY - real or emulated
+	/* (u64) cast ensures 64 bit MPY - real or emulated
 	 * HZ * 4295 is pre-evaluated by gcc - hence only 2 mpy ops
 	 */
-	loops = ((long long)(usecs * 4295 * HZ) *
-		 (long long)(loops_per_jiffy)) >> 32;
+	loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32;
 
 	__delay(loops);
 }
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/include/asm/ptrace.h linux-libre-3.10.38-gnu/arch/arc/include/asm/ptrace.h
--- linux-libre-3.10-gnu/arch/arc/include/asm/ptrace.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/include/asm/ptrace.h	2014-04-26 20:16:33.000000000 -0400
@@ -52,12 +52,14 @@ struct pt_regs {
 
 	/*to distinguish bet excp, syscall, irq */
 	union {
+		struct {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 		/* so that assembly code is same for LE/BE */
 		unsigned long orig_r8:16, event:16;
 #else
 		unsigned long event:16, orig_r8:16;
 #endif
+		};
 		long orig_r8_word;
 	};
 };
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/include/asm/sections.h linux-libre-3.10.38-gnu/arch/arc/include/asm/sections.h
--- linux-libre-3.10-gnu/arch/arc/include/asm/sections.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/include/asm/sections.h	2014-04-26 20:16:33.000000000 -0400
@@ -11,7 +11,6 @@
 
 #include <asm-generic/sections.h>
 
-extern char _int_vec_base_lds[];
 extern char __arc_dccm_base[];
 extern char __dtb_start[];
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/include/asm/spinlock.h linux-libre-3.10.38-gnu/arch/arc/include/asm/spinlock.h
--- linux-libre-3.10-gnu/arch/arc/include/asm/spinlock.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/include/asm/spinlock.h	2014-04-26 20:16:33.000000000 -0400
@@ -45,7 +45,14 @@ static inline int arch_spin_trylock(arch
 
 static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
-	lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
+	unsigned int tmp = __ARCH_SPIN_LOCK_UNLOCKED__;
+
+	__asm__ __volatile__(
+	"	ex  %0, [%1]		\n"
+	: "+r" (tmp)
+	: "r"(&(lock->slock))
+	: "memory");
+
 	smp_mb();
 }
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/include/asm/syscall.h linux-libre-3.10.38-gnu/arch/arc/include/asm/syscall.h
--- linux-libre-3.10-gnu/arch/arc/include/asm/syscall.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/include/asm/syscall.h	2014-04-26 20:16:33.000000000 -0400
@@ -18,7 +18,7 @@ static inline long
 syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 {
 	if (user_mode(regs) && in_syscall(regs))
-		return regs->orig_r8;
+		return regs->r8;
 	else
 		return -1;
 }
@@ -26,8 +26,7 @@ syscall_get_nr(struct task_struct *task,
 static inline void
 syscall_rollback(struct task_struct *task, struct pt_regs *regs)
 {
-	/* XXX: I can't fathom how pt_regs->r8 will be clobbered ? */
-	regs->r8 = regs->orig_r8;
+	regs->r0 = regs->orig_r0;
 }
 
 static inline long
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/include/asm/uaccess.h linux-libre-3.10.38-gnu/arch/arc/include/asm/uaccess.h
--- linux-libre-3.10-gnu/arch/arc/include/asm/uaccess.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/include/asm/uaccess.h	2014-04-26 20:16:33.000000000 -0400
@@ -43,7 +43,7 @@
  * Because it essentially checks if buffer end is within limit and @len is
  * non-ngeative, which implies that buffer start will be within limit too.
  *
- * The reason for rewriting being, for majorit yof cases, @len is generally
+ * The reason for rewriting being, for majority of cases, @len is generally
  * compile time constant, causing first sub-expression to be compile time
  * subsumed.
  *
@@ -53,7 +53,7 @@
  *
  */
 #define __user_ok(addr, sz)	(((sz) <= TASK_SIZE) && \
-				 (((addr)+(sz)) <= get_fs()))
+				 ((addr) <= (get_fs() - (sz))))
 #define __access_ok(addr, sz)	(unlikely(__kernel_ok) || \
 				 likely(__user_ok((addr), (sz))))
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/kernel/entry.S linux-libre-3.10.38-gnu/arch/arc/kernel/entry.S
--- linux-libre-3.10-gnu/arch/arc/kernel/entry.S	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/kernel/entry.S	2014-04-26 20:16:33.000000000 -0400
@@ -498,7 +498,7 @@ tracesys_exit:
 trap_with_param:
 
 	; stop_pc info by gdb needs this info
-	stw orig_r8_IS_BRKPT, [sp, PT_orig_r8]
+	st  orig_r8_IS_BRKPT, [sp, PT_orig_r8]
 
 	mov r0, r12
 	lr  r1, [efa]
@@ -723,7 +723,7 @@ not_exception:
 	; things to what they were, before returning from L2 context
 	;----------------------------------------------------------------
 
-	ldw  r9, [sp, PT_orig_r8]      ; get orig_r8 to make sure it is
+	ld   r9, [sp, PT_orig_r8]      ; get orig_r8 to make sure it is
 	brne r9, orig_r8_IS_IRQ2, 149f ; infact a L2 ISR ret path
 
 	ld r9, [sp, PT_status32]       ; get statu32_l2 (saved in pt_regs)
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/kernel/head.S linux-libre-3.10.38-gnu/arch/arc/kernel/head.S
--- linux-libre-3.10-gnu/arch/arc/kernel/head.S	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/kernel/head.S	2014-04-26 20:16:33.000000000 -0400
@@ -27,11 +27,16 @@ stext:
 	; Don't clobber r0-r4 yet. It might have bootloader provided info
 	;-------------------------------------------------------------------
 
+	sr	@_int_vec_base_lds, [AUX_INTR_VEC_BASE]
+
 #ifdef CONFIG_SMP
 	; Only Boot (Master) proceeds. Others wait in platform dependent way
 	;	IDENTITY Reg [ 3  2  1  0 ]
 	;	(cpu-id)             ^^^	=> Zero for UP ARC700
 	;					=> #Core-ID if SMP (Master 0)
+	; Note that non-boot CPUs might not land here if halt-on-reset and
+	; instead breath life from @first_lines_of_secondary, but we still
+	; need to make sure only boot cpu takes this path.
 	GET_CPU_ID  r5
 	cmp	r5, 0
 	jnz	arc_platform_smp_wait_to_boot
@@ -96,6 +101,8 @@ stext:
 
 first_lines_of_secondary:
 
+	sr	@_int_vec_base_lds, [AUX_INTR_VEC_BASE]
+
 	; setup per-cpu idle task as "current" on this CPU
 	ld	r0, [@secondary_idle_tsk]
 	SET_CURR_TASK_ON_CPU  r0, r1
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/kernel/irq.c linux-libre-3.10.38-gnu/arch/arc/kernel/irq.c
--- linux-libre-3.10-gnu/arch/arc/kernel/irq.c	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/kernel/irq.c	2014-04-26 20:16:33.000000000 -0400
@@ -24,7 +24,6 @@
  * -Needed for each CPU (hence not foldable into init_IRQ)
  *
  * what it does ?
- * -setup Vector Table Base Reg - in case Linux not linked at 0x8000_0000
  * -Disable all IRQs (on CPU side)
  * -Optionally, setup the High priority Interrupts as Level 2 IRQs
  */
@@ -32,8 +31,6 @@ void __cpuinit arc_init_IRQ(void)
 {
 	int level_mask = 0;
 
-	write_aux_reg(AUX_INTR_VEC_BASE, _int_vec_base_lds);
-
 	/* Disable all IRQs: enable them as devices request */
 	write_aux_reg(AUX_IENABLE, 0);
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/kernel/ptrace.c linux-libre-3.10.38-gnu/arch/arc/kernel/ptrace.c
--- linux-libre-3.10-gnu/arch/arc/kernel/ptrace.c	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/kernel/ptrace.c	2014-04-26 20:16:33.000000000 -0400
@@ -92,7 +92,7 @@ static int genregs_set(struct task_struc
 	REG_IN_CHUNK(scratch, callee, ptregs);	/* pt_regs[bta..orig_r8] */
 	REG_IN_CHUNK(callee, efa, cregs);	/* callee_regs[r25..r13] */
 	REG_IGNORE_ONE(efa);			/* efa update invalid */
-	REG_IN_ONE(stop_pc, &ptregs->ret);	/* stop_pc: PC update */
+	REG_IGNORE_ONE(stop_pc);			/* PC updated via @ret */
 
 	return ret;
 }
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/kernel/setup.c linux-libre-3.10.38-gnu/arch/arc/kernel/setup.c
--- linux-libre-3.10-gnu/arch/arc/kernel/setup.c	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/kernel/setup.c	2014-04-26 20:16:33.000000000 -0400
@@ -47,10 +47,7 @@ void __cpuinit read_arc_build_cfg_regs(v
 	READ_BCR(AUX_IDENTITY, cpu->core);
 
 	cpu->timers = read_aux_reg(ARC_REG_TIMERS_BCR);
-
 	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
-	if (cpu->vec_base == 0)
-		cpu->vec_base = (unsigned int)_int_vec_base_lds;
 
 	READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
 	cpu->uncached_base = uncached_space.start << 24;
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/kernel/signal.c linux-libre-3.10.38-gnu/arch/arc/kernel/signal.c
--- linux-libre-3.10-gnu/arch/arc/kernel/signal.c	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/kernel/signal.c	2014-04-26 20:16:33.000000000 -0400
@@ -101,7 +101,6 @@ SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct rt_sigframe __user *sf;
 	unsigned int magic;
-	int err;
 	struct pt_regs *regs = current_pt_regs();
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -119,15 +118,16 @@ SYSCALL_DEFINE0(rt_sigreturn)
 	if (!access_ok(VERIFY_READ, sf, sizeof(*sf)))
 		goto badframe;
 
-	err = restore_usr_regs(regs, sf);
-	err |= __get_user(magic, &sf->sigret_magic);
-	if (err)
+	if (__get_user(magic, &sf->sigret_magic))
 		goto badframe;
 
 	if (unlikely(is_do_ss_needed(magic)))
 		if (restore_altstack(&sf->uc.uc_stack))
 			goto badframe;
 
+	if (restore_usr_regs(regs, sf))
+		goto badframe;
+
 	/* Don't restart from sigreturn */
 	syscall_wont_restart(regs);
 
@@ -191,6 +191,15 @@ setup_rt_frame(int signo, struct k_sigac
 		return 1;
 
 	/*
+	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
+	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
+	 * during signal handler execution. This works for SA_SIGINFO as well
+	 * although the semantics are now overloaded (the same reg state can be
+	 * inspected by userland: but are they allowed to fiddle with it ?
+	 */
+	err |= stash_usr_regs(sf, regs, set);
+
+	/*
 	 * SA_SIGINFO requires 3 args to signal handler:
 	 *  #1: sig-no (common to any handler)
 	 *  #2: struct siginfo
@@ -213,14 +222,6 @@ setup_rt_frame(int signo, struct k_sigac
 		magic = MAGIC_SIGALTSTK;
 	}
 
-	/*
-	 * w/o SA_SIGINFO, struct ucontext is partially populated (only
-	 * uc_mcontext/uc_sigmask) for kernel's normal user state preservation
-	 * during signal handler execution. This works for SA_SIGINFO as well
-	 * although the semantics are now overloaded (the same reg state can be
-	 * inspected by userland: but are they allowed to fiddle with it ?
-	 */
-	err |= stash_usr_regs(sf, regs, set);
 	err |= __put_user(magic, &sf->sigret_magic);
 	if (err)
 		return err;
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/kernel/unaligned.c linux-libre-3.10.38-gnu/arch/arc/kernel/unaligned.c
--- linux-libre-3.10-gnu/arch/arc/kernel/unaligned.c	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/kernel/unaligned.c	2014-04-26 20:16:33.000000000 -0400
@@ -233,6 +233,12 @@ int misaligned_fixup(unsigned long addre
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;
+
+		/* handle zero-overhead-loop */
+		if ((regs->ret == regs->lp_end) && (regs->lp_count)) {
+			regs->ret = regs->lp_start;
+			regs->lp_count--;
+		}
 	}
 
 	return 0;
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/lib/strchr-700.S linux-libre-3.10.38-gnu/arch/arc/lib/strchr-700.S
--- linux-libre-3.10-gnu/arch/arc/lib/strchr-700.S	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/lib/strchr-700.S	2014-04-26 20:16:33.000000000 -0400
@@ -39,9 +39,18 @@ ARC_ENTRY strchr
 	ld.a	r2,[r0,4]
 	sub	r12,r6,r7
 	bic	r12,r12,r6
+#ifdef __LITTLE_ENDIAN__
 	and	r7,r12,r4
 	breq	r7,0,.Loop ; For speed, we want this branch to be unaligned.
 	b	.Lfound_char ; Likewise this one.
+#else
+	and	r12,r12,r4
+	breq	r12,0,.Loop ; For speed, we want this branch to be unaligned.
+	lsr_s	r12,r12,7
+	bic 	r2,r7,r6
+	b.d	.Lfound_char_b
+	and_s	r2,r2,r12
+#endif
 ; /* We require this code address to be unaligned for speed...  */
 .Laligned:
 	ld_s	r2,[r0]
@@ -95,6 +104,7 @@ ARC_ENTRY strchr
 	lsr	r7,r7,7
 
 	bic	r2,r7,r6
+.Lfound_char_b:
 	norm	r2,r2
 	sub_s	r0,r0,4
 	asr_s	r2,r2,3
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arc/mm/fault.c linux-libre-3.10.38-gnu/arch/arc/mm/fault.c
--- linux-libre-3.10-gnu/arch/arc/mm/fault.c	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arc/mm/fault.c	2014-04-26 20:16:33.000000000 -0400
@@ -16,7 +16,7 @@
 #include <linux/kdebug.h>
 #include <asm/pgalloc.h>
 
-static int handle_vmalloc_fault(struct mm_struct *mm, unsigned long address)
+static int handle_vmalloc_fault(unsigned long address)
 {
 	/*
 	 * Synchronize this task's top level page-table
@@ -26,7 +26,7 @@ static int handle_vmalloc_fault(struct m
 	pud_t *pud, *pud_k;
 	pmd_t *pmd, *pmd_k;
 
-	pgd = pgd_offset_fast(mm, address);
+	pgd = pgd_offset_fast(current->active_mm, address);
 	pgd_k = pgd_offset_k(address);
 
 	if (!pgd_present(*pgd_k))
@@ -72,7 +72,7 @@ void do_page_fault(struct pt_regs *regs,
 	 * nothing more.
 	 */
 	if (address >= VMALLOC_START && address <= VMALLOC_END) {
-		ret = handle_vmalloc_fault(mm, address);
+		ret = handle_vmalloc_fault(address);
 		if (unlikely(ret))
 			goto bad_area_nosemaphore;
 		else
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/compressed/atags_to_fdt.c linux-libre-3.10.38-gnu/arch/arm/boot/compressed/atags_to_fdt.c
--- linux-libre-3.10-gnu/arch/arm/boot/compressed/atags_to_fdt.c	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/compressed/atags_to_fdt.c	2014-04-26 20:16:33.000000000 -0400
@@ -53,6 +53,17 @@ static const void *getprop(const void *f
 	return fdt_getprop(fdt, offset, property, len);
 }
 
+static uint32_t get_cell_size(const void *fdt)
+{
+	int len;
+	uint32_t cell_size = 1;
+	const uint32_t *size_len =  getprop(fdt, "/", "#size-cells", &len);
+
+	if (size_len)
+		cell_size = fdt32_to_cpu(*size_len);
+	return cell_size;
+}
+
 static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
 {
 	char cmdline[COMMAND_LINE_SIZE];
@@ -95,9 +106,11 @@ static void merge_fdt_bootargs(void *fdt
 int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 {
 	struct tag *atag = atag_list;
-	uint32_t mem_reg_property[2 * NR_BANKS];
+	/* In the case of 64 bits memory size, need to reserve 2 cells for
+	 * address and size for each bank */
+	uint32_t mem_reg_property[2 * 2 * NR_BANKS];
 	int memcount = 0;
-	int ret;
+	int ret, memsize;
 
 	/* make sure we've got an aligned pointer */
 	if ((u32)atag_list & 0x3)
@@ -137,8 +150,25 @@ int atags_to_fdt(void *atag_list, void *
 				continue;
 			if (!atag->u.mem.size)
 				continue;
-			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
-			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
+			memsize = get_cell_size(fdt);
+
+			if (memsize == 2) {
+				/* if memsize is 2, that means that
+				 * each data needs 2 cells of 32 bits,
+				 * so the data are 64 bits */
+				uint64_t *mem_reg_prop64 =
+					(uint64_t *)mem_reg_property;
+				mem_reg_prop64[memcount++] =
+					cpu_to_fdt64(atag->u.mem.start);
+				mem_reg_prop64[memcount++] =
+					cpu_to_fdt64(atag->u.mem.size);
+			} else {
+				mem_reg_property[memcount++] =
+					cpu_to_fdt32(atag->u.mem.start);
+				mem_reg_property[memcount++] =
+					cpu_to_fdt32(atag->u.mem.size);
+			}
+
 		} else if (atag->hdr.tag == ATAG_INITRD2) {
 			uint32_t initrd_start, initrd_size;
 			initrd_start = atag->u.initrd.start;
@@ -150,8 +180,10 @@ int atags_to_fdt(void *atag_list, void *
 		}
 	}
 
-	if (memcount)
-		setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount);
+	if (memcount) {
+		setprop(fdt, "/memory", "reg", mem_reg_property,
+			4 * memcount * memsize);
+	}
 
 	return fdt_pack(fdt);
 }
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/armada-370-xp.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/armada-370-xp.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/armada-370-xp.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/armada-370-xp.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -51,7 +51,7 @@
 
 			coherency-fabric@20200 {
 				compatible = "marvell,coherency-fabric";
-				reg = <0x20200 0xb0>, <0x21810 0x1c>;
+				reg = <0x20200 0xb0>, <0x21010 0x1c>;
 			};
 
 			serial@12000 {
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/armada-xp-mv78230.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -81,7 +81,7 @@
 			/*
 			 * MV78230 has 2 PCIe units Gen2.0: One unit can be
 			 * configured as x4 or quad x1 lanes. One unit is
-			 * x4/x1.
+			 * x1 only.
 			 */
 			pcie-controller {
 				compatible = "marvell,armada-xp-pcie";
@@ -94,10 +94,10 @@
 				bus-range = <0x00 0xff>;
 
 				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
 					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
 					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
 					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
+					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
 					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
 					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
 
@@ -165,19 +165,19 @@
 					status = "disabled";
 				};
 
-				pcie@9,0 {
+				pcie@5,0 {
 					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
+					assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+					reg = <0x2800 0 0 0 0>;
 					#address-cells = <3>;
 					#size-cells = <2>;
 					#interrupt-cells = <1>;
 					ranges;
 					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
+					interrupt-map = <0 0 0 0 &mpic 62>;
+					marvell,pcie-port = <1>;
 					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
+					clocks = <&gateclk 9>;
 					status = "disabled";
 				};
 			};
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/armada-xp-mv78260.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -101,7 +101,7 @@
 			/*
 			 * MV78260 has 3 PCIe units Gen2.0: Two units can be
 			 * configured as x4 or quad x1 lanes. One unit is
-			 * x4/x1.
+			 * x4 only.
 			 */
 			pcie-controller {
 				compatible = "marvell,armada-xp-pcie";
@@ -119,7 +119,9 @@
 					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
 					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
 					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
-					0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
+					0x82000000 0 0x84000 0x84000 0 0x00002000   /* Port 1.1 registers */
+					0x82000000 0 0x88000 0x88000 0 0x00002000   /* Port 1.2 registers */
+					0x82000000 0 0x8c000 0x8c000 0 0x00002000   /* Port 1.3 registers */
 					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
 					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
 
@@ -187,35 +189,83 @@
 					status = "disabled";
 				};
 
-				pcie@9,0 {
+				pcie@5,0 {
 					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
+					assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+					reg = <0x2800 0 0 0 0>;
 					#address-cells = <3>;
 					#size-cells = <2>;
 					#interrupt-cells = <1>;
 					ranges;
 					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
+					interrupt-map = <0 0 0 0 &mpic 62>;
+					marvell,pcie-port = <1>;
 					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
+					clocks = <&gateclk 9>;
 					status = "disabled";
 				};
 
-				pcie@10,0 {
+				pcie@6,0 {
 					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
-					reg = <0x5000 0 0 0 0>;
+					assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+					reg = <0x3000 0 0 0 0>;
 					#address-cells = <3>;
 					#size-cells = <2>;
 					#interrupt-cells = <1>;
 					ranges;
 					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 103>;
-					marvell,pcie-port = <3>;
+					interrupt-map = <0 0 0 0 &mpic 63>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <1>;
+					clocks = <&gateclk 10>;
+					status = "disabled";
+				};
+
+				pcie@7,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+					reg = <0x3800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 64>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <2>;
+					clocks = <&gateclk 11>;
+					status = "disabled";
+				};
+
+				pcie@8,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+					reg = <0x4000 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 65>;
+					marvell,pcie-port = <1>;
+					marvell,pcie-lane = <3>;
+					clocks = <&gateclk 12>;
+					status = "disabled";
+				};
+
+				pcie@9,0 {
+					device_type = "pci";
+					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+					reg = <0x4800 0 0 0 0>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					#interrupt-cells = <1>;
+					ranges;
+					interrupt-map-mask = <0 0 0 0>;
+					interrupt-map = <0 0 0 0 &mpic 99>;
+					marvell,pcie-port = <2>;
 					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 27>;
+					clocks = <&gateclk 26>;
 					status = "disabled";
 				};
 			};
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/at91rm9200.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91rm9200.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/at91rm9200.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91rm9200.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -35,8 +35,12 @@
 		ssc2 = &ssc2;
 	};
 	cpus {
-		cpu@0 {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
 			compatible = "arm,arm920t";
+			device_type = "cpu";
 		};
 	};
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/at91sam9260.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91sam9260.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/at91sam9260.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91sam9260.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -32,8 +32,12 @@
 		ssc0 = &ssc0;
 	};
 	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
@@ -340,6 +344,14 @@
 					};
 				};
 
+				i2c_gpio0 {
+					pinctrl_i2c_gpio0: i2c_gpio0-0 {
+						atmel,pins =
+							<0 23 0x0 0x3   /* PA23 gpio I2C_SDA pin */
+							 0 24 0x0 0x3>; /* PA24 gpio I2C_SCL pin */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -592,6 +604,8 @@
 		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio0>;
 		status = "disabled";
 	};
 };
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/at91sam9263.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91sam9263.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/at91sam9263.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91sam9263.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -29,8 +29,12 @@
 		ssc1 = &ssc1;
 	};
 	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/at91sam9g45.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91sam9g45.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/at91sam9g45.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91sam9g45.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -35,8 +35,12 @@
 		ssc1 = &ssc1;
 	};
 	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/at91sam9n12.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91sam9n12.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/at91sam9n12.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91sam9n12.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -31,8 +31,12 @@
 		ssc0 = &ssc0;
 	};
 	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/at91sam9n12ek.dts linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91sam9n12ek.dts
--- linux-libre-3.10-gnu/arch/arm/boot/dts/at91sam9n12ek.dts	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91sam9n12ek.dts	2014-04-26 20:16:33.000000000 -0400
@@ -14,11 +14,11 @@
 	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
 	};
 
 	memory {
-		reg = <0x20000000 0x10000000>;
+		reg = <0x20000000 0x8000000>;
 	};
 
 	clocks {
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/at91sam9x5.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91sam9x5.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/at91sam9x5.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/at91sam9x5.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -33,8 +33,12 @@
 		ssc0 = &ssc0;
 	};
 	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
@@ -643,7 +647,7 @@
 			};
 
 			rtc@fffffeb0 {
-				compatible = "atmel,at91rm9200-rtc";
+				compatible = "atmel,at91sam9x5-rtc";
 				reg = <0xfffffeb0 0x40>;
 				interrupts = <1 4 7>;
 				status = "disabled";
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/bcm2835.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/bcm2835.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/bcm2835.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/bcm2835.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -85,6 +85,8 @@
 			reg = <0x7e205000 0x1000>;
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -93,6 +95,8 @@
 			reg = <0x7e804000 0x1000>;
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/cros5250-common.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/cros5250-common.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/cros5250-common.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/cros5250-common.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -27,6 +27,13 @@
 		i2c2_bus: i2c2-bus {
 			samsung,pin-pud = <0>;
 		};
+
+		max77686_irq: max77686-irq {
+			samsung,pins = "gpx3-2";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	i2c@12C60000 {
@@ -35,6 +42,11 @@
 
 		max77686@09 {
 			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77686_irq>;
+			wakeup-source;
 			reg = <0x09>;
 
 			voltage-regulators {
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/exynos5250.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/exynos5250.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/exynos5250.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/exynos5250.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -545,7 +545,7 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
-			clocks = <&clock 271>;
+			clocks = <&clock 346>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/imx23.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/imx23.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/imx23.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/imx23.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -23,8 +23,12 @@
 	};
 
 	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/imx28.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/imx28.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/imx28.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/imx28.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -32,8 +32,12 @@
 	};
 
 	cpus {
-		cpu@0 {
-			compatible = "arm,arm926ejs";
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
 		};
 	};
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/imx6dl.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/imx6dl.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/imx6dl.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/imx6dl.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -18,12 +18,14 @@
 
 		cpu@0 {
 			compatible = "arm,cortex-a9";
+			device_type = "cpu";
 			reg = <0>;
 			next-level-cache = <&L2>;
 		};
 
 		cpu@1 {
 			compatible = "arm,cortex-a9";
+			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2>;
 		};
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/imx6q.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/imx6q.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/imx6q.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/imx6q.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -18,6 +18,7 @@
 
 		cpu@0 {
 			compatible = "arm,cortex-a9";
+			device_type = "cpu";
 			reg = <0>;
 			next-level-cache = <&L2>;
 			operating-points = <
@@ -39,18 +40,21 @@
 
 		cpu@1 {
 			compatible = "arm,cortex-a9";
+			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2>;
 		};
 
 		cpu@2 {
 			compatible = "arm,cortex-a9";
+			device_type = "cpu";
 			reg = <2>;
 			next-level-cache = <&L2>;
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a9";
+			device_type = "cpu";
 			reg = <3>;
 			next-level-cache = <&L2>;
 		};
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/integratorcp.dts linux-libre-3.10.38-gnu/arch/arm/boot/dts/integratorcp.dts
--- linux-libre-3.10-gnu/arch/arm/boot/dts/integratorcp.dts	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/integratorcp.dts	2014-04-26 20:16:33.000000000 -0400
@@ -9,11 +9,6 @@
 	model = "ARM Integrator/CP";
 	compatible = "arm,integrator-cp";
 
-	aliases {
-		arm,timer-primary = &timer2;
-		arm,timer-secondary = &timer1;
-	};
-
 	chosen {
 		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
 	};
@@ -24,14 +19,18 @@
 	};
 
 	timer0: timer@13000000 {
+		/* TIMER0 runs @ 25MHz */
 		compatible = "arm,integrator-cp-timer";
+		status = "disabled";
 	};
 
 	timer1: timer@13000100 {
+		/* TIMER1 runs @ 1MHz */
 		compatible = "arm,integrator-cp-timer";
 	};
 
 	timer2: timer@13000200 {
+		/* TIMER2 runs @ 1MHz */
 		compatible = "arm,integrator-cp-timer";
 	};
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/sama5d3.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/sama5d3.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/sama5d3.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/sama5d3.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -35,8 +35,12 @@
 		ssc1 = &ssc1;
 	};
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a5";
+			reg = <0x0>;
 		};
 	};
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/sun4i-a10.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/sun4i-a10.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/sun4i-a10.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/sun4i-a10.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -16,8 +16,12 @@
 	interrupt-parent = <&intc>;
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a8";
+			reg = <0x0>;
 		};
 	};
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/boot/dts/sun5i-a13.dtsi linux-libre-3.10.38-gnu/arch/arm/boot/dts/sun5i-a13.dtsi
--- linux-libre-3.10-gnu/arch/arm/boot/dts/sun5i-a13.dtsi	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/boot/dts/sun5i-a13.dtsi	2014-04-26 20:16:33.000000000 -0400
@@ -17,8 +17,12 @@
 	interrupt-parent = <&intc>;
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a8";
+			reg = <0x0>;
 		};
 	};
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/crypto/aes-armv4.S linux-libre-3.10.38-gnu/arch/arm/crypto/aes-armv4.S
--- linux-libre-3.10-gnu/arch/arm/crypto/aes-armv4.S	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/crypto/aes-armv4.S	2014-04-26 20:16:33.000000000 -0400
@@ -148,7 +148,7 @@ AES_Te:
 @ 		 const AES_KEY *key) {
 .align	5
 ENTRY(AES_encrypt)
-	sub	r3,pc,#8		@ AES_encrypt
+	adr	r3,AES_encrypt
 	stmdb   sp!,{r1,r4-r12,lr}
 	mov	r12,r0		@ inp
 	mov	r11,r2
@@ -381,7 +381,7 @@ _armv4_AES_encrypt:
 .align	5
 ENTRY(private_AES_set_encrypt_key)
 _armv4_AES_set_encrypt_key:
-	sub	r3,pc,#8		@ AES_set_encrypt_key
+	adr	r3,_armv4_AES_set_encrypt_key
 	teq	r0,#0
 	moveq	r0,#-1
 	beq	.Labrt
@@ -843,7 +843,7 @@ AES_Td:
 @ 		 const AES_KEY *key) {
 .align	5
 ENTRY(AES_decrypt)
-	sub	r3,pc,#8		@ AES_decrypt
+	adr	r3,AES_decrypt
 	stmdb   sp!,{r1,r4-r12,lr}
 	mov	r12,r0		@ inp
 	mov	r11,r2
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/a.out-core.h linux-libre-3.10.38-gnu/arch/arm/include/asm/a.out-core.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/a.out-core.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/a.out-core.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,45 +0,0 @@
-/* a.out coredump register dumper
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
-
-#ifdef __KERNEL__
-
-#include <linux/user.h>
-#include <linux/elfcore.h>
-
-/*
- * fill in the user structure for an a.out core dump
- */
-static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
-{
-	struct task_struct *tsk = current;
-
-	dump->magic = CMAGIC;
-	dump->start_code = tsk->mm->start_code;
-	dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1);
-
-	dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT;
-	dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	dump->u_ssize = 0;
-
-	memset(dump->u_debugreg, 0, sizeof(dump->u_debugreg));
-
-	if (dump->start_stack < 0x04000000)
-		dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
-
-	dump->regs = *regs;
-	dump->u_fpvalid = dump_fpu (regs, &dump->u_fp);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/arch_timer.h linux-libre-3.10.38-gnu/arch/arm/include/asm/arch_timer.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/arch_timer.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/arch_timer.h	2014-04-26 20:16:33.000000000 -0400
@@ -80,15 +80,6 @@ static inline u32 arch_timer_get_cntfrq(
 	return val;
 }
 
-static inline u64 arch_counter_get_cntpct(void)
-{
-	u64 cval;
-
-	isb();
-	asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval));
-	return cval;
-}
-
 static inline u64 arch_counter_get_cntvct(void)
 {
 	u64 cval;
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/cacheflush.h linux-libre-3.10.38-gnu/arch/arm/include/asm/cacheflush.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/cacheflush.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/cacheflush.h	2014-04-26 20:16:33.000000000 -0400
@@ -212,6 +212,7 @@ extern void copy_to_user_page(struct vm_
 static inline void __flush_icache_all(void)
 {
 	__flush_icache_preferred();
+	dsb();
 }
 
 /*
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/elf.h linux-libre-3.10.38-gnu/arch/arm/include/asm/elf.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/elf.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/elf.h	2014-04-26 20:16:33.000000000 -0400
@@ -130,4 +130,10 @@ struct mm_struct;
 extern unsigned long arch_randomize_brk(struct mm_struct *mm);
 #define arch_randomize_brk arch_randomize_brk
 
+#ifdef CONFIG_MMU
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+int arch_setup_additional_pages(struct linux_binprm *, int);
+#endif
+
 #endif
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/jump_label.h linux-libre-3.10.38-gnu/arch/arm/include/asm/jump_label.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/jump_label.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/jump_label.h	2014-04-26 20:16:33.000000000 -0400
@@ -16,7 +16,7 @@
 
 static __always_inline bool arch_static_branch(struct static_key *key)
 {
-	asm goto("1:\n\t"
+	asm_volatile_goto("1:\n\t"
 		 JUMP_LABEL_NOP "\n\t"
 		 ".pushsection __jump_table,  \"aw\"\n\t"
 		 ".word 1b, %l[l_yes], %c0\n\t"
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/kvm_asm.h linux-libre-3.10.38-gnu/arch/arm/include/asm/kvm_asm.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/kvm_asm.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/kvm_asm.h	2014-04-26 20:16:33.000000000 -0400
@@ -37,16 +37,18 @@
 #define c5_AIFSR	15	/* Auxilary Instrunction Fault Status R */
 #define c6_DFAR		16	/* Data Fault Address Register */
 #define c6_IFAR		17	/* Instruction Fault Address Register */
-#define c9_L2CTLR	18	/* Cortex A15 L2 Control Register */
-#define c10_PRRR	19	/* Primary Region Remap Register */
-#define c10_NMRR	20	/* Normal Memory Remap Register */
-#define c12_VBAR	21	/* Vector Base Address Register */
-#define c13_CID		22	/* Context ID Register */
-#define c13_TID_URW	23	/* Thread ID, User R/W */
-#define c13_TID_URO	24	/* Thread ID, User R/O */
-#define c13_TID_PRIV	25	/* Thread ID, Privileged */
-#define c14_CNTKCTL	26	/* Timer Control Register (PL1) */
-#define NR_CP15_REGS	27	/* Number of regs (incl. invalid) */
+#define c7_PAR		18	/* Physical Address Register */
+#define c7_PAR_high	19	/* PAR top 32 bits */
+#define c9_L2CTLR	20	/* Cortex A15 L2 Control Register */
+#define c10_PRRR	21	/* Primary Region Remap Register */
+#define c10_NMRR	22	/* Normal Memory Remap Register */
+#define c12_VBAR	23	/* Vector Base Address Register */
+#define c13_CID		24	/* Context ID Register */
+#define c13_TID_URW	25	/* Thread ID, User R/W */
+#define c13_TID_URO	26	/* Thread ID, User R/O */
+#define c13_TID_PRIV	27	/* Thread ID, Privileged */
+#define c14_CNTKCTL	28	/* Timer Control Register (PL1) */
+#define NR_CP15_REGS	29	/* Number of regs (incl. invalid) */
 
 #define ARM_EXCEPTION_RESET	  0
 #define ARM_EXCEPTION_UNDEFINED   1
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/mmu_context.h linux-libre-3.10.38-gnu/arch/arm/include/asm/mmu_context.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/mmu_context.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/mmu_context.h	2014-04-26 20:16:33.000000000 -0400
@@ -27,7 +27,15 @@ void __check_vmalloc_seq(struct mm_struc
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
 #define init_new_context(tsk,mm)	({ atomic64_set(&mm->context.id, 0); 0; })
 
-DECLARE_PER_CPU(atomic64_t, active_asids);
+#ifdef CONFIG_ARM_ERRATA_798181
+void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
+			     cpumask_t *mask);
+#else  /* !CONFIG_ARM_ERRATA_798181 */
+static inline void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
+					   cpumask_t *mask)
+{
+}
+#endif /* CONFIG_ARM_ERRATA_798181 */
 
 #else	/* !CONFIG_CPU_HAS_ASID */
 
@@ -47,7 +55,7 @@ static inline void check_and_switch_cont
 		 * on non-ASID CPUs, the old mm will remain valid until the
 		 * finish_arch_post_lock_switch() call.
 		 */
-		set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
+		mm->context.switch_pending = 1;
 	else
 		cpu_switch_mm(mm->pgd, mm);
 }
@@ -56,9 +64,21 @@ static inline void check_and_switch_cont
 	finish_arch_post_lock_switch
 static inline void finish_arch_post_lock_switch(void)
 {
-	if (test_and_clear_thread_flag(TIF_SWITCH_MM)) {
-		struct mm_struct *mm = current->mm;
-		cpu_switch_mm(mm->pgd, mm);
+	struct mm_struct *mm = current->mm;
+
+	if (mm && mm->context.switch_pending) {
+		/*
+		 * Preemption must be disabled during cpu_switch_mm() as we
+		 * have some stateful cache flush implementations. Check
+		 * switch_pending again in case we were preempted and the
+		 * switch to this mm was already done.
+		 */
+		preempt_disable();
+		if (mm->context.switch_pending) {
+			mm->context.switch_pending = 0;
+			cpu_switch_mm(mm->pgd, mm);
+		}
+		preempt_enable_no_resched();
 	}
 }
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/mmu.h linux-libre-3.10.38-gnu/arch/arm/include/asm/mmu.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/mmu.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/mmu.h	2014-04-26 20:16:33.000000000 -0400
@@ -6,8 +6,11 @@
 typedef struct {
 #ifdef CONFIG_CPU_HAS_ASID
 	atomic64_t	id;
+#else
+	int		switch_pending;
 #endif
 	unsigned int	vmalloc_seq;
+	unsigned long	sigpage;
 } mm_context_t;
 
 #ifdef CONFIG_CPU_HAS_ASID
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/outercache.h linux-libre-3.10.38-gnu/arch/arm/include/asm/outercache.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/outercache.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/outercache.h	2014-04-26 20:16:33.000000000 -0400
@@ -37,10 +37,10 @@ struct outer_cache_fns {
 	void (*resume)(void);
 };
 
-#ifdef CONFIG_OUTER_CACHE
-
 extern struct outer_cache_fns outer_cache;
 
+#ifdef CONFIG_OUTER_CACHE
+
 static inline void outer_inv_range(phys_addr_t start, phys_addr_t end)
 {
 	if (outer_cache.inv_range)
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/page.h linux-libre-3.10.38-gnu/arch/arm/include/asm/page.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/page.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/page.h	2014-04-26 20:16:33.000000000 -0400
@@ -142,7 +142,9 @@ extern void __cpu_copy_user_highpage(str
 #define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, const void *from);
 
+#ifdef CONFIG_KUSER_HELPERS
 #define __HAVE_ARCH_GATE_AREA 1
+#endif
 
 #ifdef CONFIG_ARM_LPAE
 #include <asm/pgtable-3level-types.h>
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/pgtable.h linux-libre-3.10.38-gnu/arch/arm/include/asm/pgtable.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/pgtable.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/pgtable.h	2014-04-26 20:16:33.000000000 -0400
@@ -58,7 +58,7 @@ extern void __pgd_error(const char *file
  * mapping to be mapped at.  This is particularly important for
  * non-high vector CPUs.
  */
-#define FIRST_USER_ADDRESS	PAGE_SIZE
+#define FIRST_USER_ADDRESS	(PAGE_SIZE * 2)
 
 /*
  * Use TASK_SIZE as the ceiling argument for free_pgtables() and
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/processor.h linux-libre-3.10.38-gnu/arch/arm/include/asm/processor.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/processor.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/processor.h	2014-04-26 20:16:33.000000000 -0400
@@ -54,7 +54,6 @@ struct thread_struct {
 
 #define start_thread(regs,pc,sp)					\
 ({									\
-	unsigned long *stack = (unsigned long *)sp;			\
 	memset(regs->uregs, 0, sizeof(regs->uregs));			\
 	if (current->personality & ADDR_LIMIT_32BIT)			\
 		regs->ARM_cpsr = USR_MODE;				\
@@ -65,9 +64,6 @@ struct thread_struct {
 	regs->ARM_cpsr |= PSR_ENDSTATE;					\
 	regs->ARM_pc = pc & ~1;		/* pc */			\
 	regs->ARM_sp = sp;		/* sp */			\
-	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
-	regs->ARM_r1 = stack[1];	/* r1 (argv) */			\
-	regs->ARM_r0 = stack[0];	/* r0 (argc) */			\
 	nommu_start_thread(regs);					\
 })
 
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/spinlock.h linux-libre-3.10.38-gnu/arch/arm/include/asm/spinlock.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/spinlock.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/spinlock.h	2014-04-26 20:16:33.000000000 -0400
@@ -97,19 +97,22 @@ static inline void arch_spin_lock(arch_s
 
 static inline int arch_spin_trylock(arch_spinlock_t *lock)
 {
-	unsigned long tmp;
+	unsigned long contended, res;
 	u32 slock;
 
-	__asm__ __volatile__(
-"	ldrex	%0, [%2]\n"
-"	subs	%1, %0, %0, ror #16\n"
-"	addeq	%0, %0, %3\n"
-"	strexeq	%1, %0, [%2]"
-	: "=&r" (slock), "=&r" (tmp)
-	: "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
-	: "cc");
+	do {
+		__asm__ __volatile__(
+		"	ldrex	%0, [%3]\n"
+		"	mov	%2, #0\n"
+		"	subs	%1, %0, %0, ror #16\n"
+		"	addeq	%0, %0, %4\n"
+		"	strexeq	%2, %0, [%3]"
+		: "=&r" (slock), "=&r" (contended), "=&r" (res)
+		: "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
+		: "cc");
+	} while (res);
 
-	if (tmp == 0) {
+	if (!contended) {
 		smp_mb();
 		return 1;
 	} else {
@@ -165,17 +168,20 @@ static inline void arch_write_lock(arch_
 
 static inline int arch_write_trylock(arch_rwlock_t *rw)
 {
-	unsigned long tmp;
+	unsigned long contended, res;
 
-	__asm__ __volatile__(
-"	ldrex	%0, [%1]\n"
-"	teq	%0, #0\n"
-"	strexeq	%0, %2, [%1]"
-	: "=&r" (tmp)
-	: "r" (&rw->lock), "r" (0x80000000)
-	: "cc");
+	do {
+		__asm__ __volatile__(
+		"	ldrex	%0, [%2]\n"
+		"	mov	%1, #0\n"
+		"	teq	%0, #0\n"
+		"	strexeq	%1, %3, [%2]"
+		: "=&r" (contended), "=&r" (res)
+		: "r" (&rw->lock), "r" (0x80000000)
+		: "cc");
+	} while (res);
 
-	if (tmp == 0) {
+	if (!contended) {
 		smp_mb();
 		return 1;
 	} else {
@@ -251,18 +257,26 @@ static inline void arch_read_unlock(arch
 
 static inline int arch_read_trylock(arch_rwlock_t *rw)
 {
-	unsigned long tmp, tmp2 = 1;
+	unsigned long contended, res;
 
-	__asm__ __volatile__(
-"	ldrex	%0, [%2]\n"
-"	adds	%0, %0, #1\n"
-"	strexpl	%1, %0, [%2]\n"
-	: "=&r" (tmp), "+r" (tmp2)
-	: "r" (&rw->lock)
-	: "cc");
+	do {
+		__asm__ __volatile__(
+		"	ldrex	%0, [%2]\n"
+		"	mov	%1, #0\n"
+		"	adds	%0, %0, #1\n"
+		"	strexpl	%1, %0, [%2]"
+		: "=&r" (contended), "=&r" (res)
+		: "r" (&rw->lock)
+		: "cc");
+	} while (res);
 
-	smp_mb();
-	return tmp2 == 0;
+	/* If the lock is negative, then it is already held for write. */
+	if (contended < 0x80000000) {
+		smp_mb();
+		return 1;
+	} else {
+		return 0;
+	}
 }
 
 /* read_can_lock - would read_trylock() succeed? */
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/syscall.h linux-libre-3.10.38-gnu/arch/arm/include/asm/syscall.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/syscall.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/syscall.h	2014-04-26 20:16:33.000000000 -0400
@@ -57,6 +57,9 @@ static inline void syscall_get_arguments
 					 unsigned int i, unsigned int n,
 					 unsigned long *args)
 {
+	if (n == 0)
+		return;
+
 	if (i + n > SYSCALL_MAX_ARGS) {
 		unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
 		unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
@@ -81,6 +84,9 @@ static inline void syscall_set_arguments
 					 unsigned int i, unsigned int n,
 					 const unsigned long *args)
 {
+	if (n == 0)
+		return;
+
 	if (i + n > SYSCALL_MAX_ARGS) {
 		pr_warning("%s called with max args %d, handling only %d\n",
 			   __func__, i + n, SYSCALL_MAX_ARGS);
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/thread_info.h linux-libre-3.10.38-gnu/arch/arm/include/asm/thread_info.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/thread_info.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/thread_info.h	2014-04-26 20:16:33.000000000 -0400
@@ -156,7 +156,6 @@ extern int vfp_restore_user_hwstate(stru
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	20
-#define TIF_SWITCH_MM		22	/* deferred switch_mm */
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/asm/tlb.h linux-libre-3.10.38-gnu/arch/arm/include/asm/tlb.h
--- linux-libre-3.10-gnu/arch/arm/include/asm/tlb.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/asm/tlb.h	2014-04-26 20:16:33.000000000 -0400
@@ -43,6 +43,7 @@ struct mmu_gather {
 	struct mm_struct	*mm;
 	unsigned int		fullmm;
 	struct vm_area_struct	*vma;
+	unsigned long		start, end;
 	unsigned long		range_start;
 	unsigned long		range_end;
 	unsigned int		nr;
@@ -107,10 +108,12 @@ static inline void tlb_flush_mmu(struct
 }
 
 static inline void
-tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm)
+tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end)
 {
 	tlb->mm = mm;
-	tlb->fullmm = fullmm;
+	tlb->fullmm = !(start | (end+1));
+	tlb->start = start;
+	tlb->end = end;
 	tlb->vma = NULL;
 	tlb->max = ARRAY_SIZE(tlb->local);
 	tlb->pages = tlb->local;
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/uapi/asm/a.out.h linux-libre-3.10.38-gnu/arch/arm/include/uapi/asm/a.out.h
--- linux-libre-3.10-gnu/arch/arm/include/uapi/asm/a.out.h	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/uapi/asm/a.out.h	1969-12-31 19:00:00.000000000 -0500
@@ -1,34 +0,0 @@
-#ifndef __ARM_A_OUT_H__
-#define __ARM_A_OUT_H__
-
-#include <linux/personality.h>
-#include <linux/types.h>
-
-struct exec
-{
-  __u32 a_info;		/* Use macros N_MAGIC, etc for access */
-  __u32 a_text;		/* length of text, in bytes */
-  __u32 a_data;		/* length of data, in bytes */
-  __u32 a_bss;		/* length of uninitialized data area for file, in bytes */
-  __u32 a_syms;		/* length of symbol table data in file, in bytes */
-  __u32 a_entry;	/* start address */
-  __u32 a_trsize;	/* length of relocation info for text, in bytes */
-  __u32 a_drsize;	/* length of relocation info for data, in bytes */
-};
-
-/*
- * This is always the same
- */
-#define N_TXTADDR(a)	(0x00008000)
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#define M_ARM 103
-
-#ifndef LIBRARY_START_TEXT
-#define LIBRARY_START_TEXT	(0x00c00000)
-#endif
-
-#endif /* __A_OUT_GNU_H__ */
diff -druNp --no-dereference linux-libre-3.10-gnu/arch/arm/include/uapi/asm/Kbuild linux-libre-3.10.38-gnu/arch/arm/include/uapi/asm/Kbuild
--- linux-libre-3.10-gnu/arch/arm/include/uapi/asm/Kbuild	2013-06-30 18:13:29.000000000 -0400
+++ linux-libre-3.10.38-gnu/arch/arm/include/uapi/asm/Kbuild	2014-04-26 20:16:33.000000000 -0400
@@ -1,7 +1,6 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.