diff -druNp --no-dereference linux-libre-4.4-gnu/arch/alpha/include/asm/futex.h linux-libre-4.4.150-gnu/arch/alpha/include/asm/futex.h
--- linux-libre-4.4-gnu/arch/alpha/include/asm/futex.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/alpha/include/asm/futex.h	2018-08-18 04:45:38.000000000 -0400
@@ -29,18 +29,10 @@
 	:	"r" (uaddr), "r"(oparg)				\
 	:	"memory")
 
-static inline int futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
+static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
+		u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret;
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
 
 	pagefault_disable();
 
@@ -66,17 +58,9 @@ static inline int futex_atomic_op_inuser
 
 	pagefault_enable();
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/alpha/include/asm/mmu_context.h linux-libre-4.4.150-gnu/arch/alpha/include/asm/mmu_context.h
--- linux-libre-4.4-gnu/arch/alpha/include/asm/mmu_context.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/alpha/include/asm/mmu_context.h	2018-08-18 04:45:38.000000000 -0400
@@ -7,6 +7,7 @@
  * Copyright (C) 1996, Linus Torvalds
  */
 
+#include <linux/sched.h>
 #include <asm/machvec.h>
 #include <asm/compiler.h>
 #include <asm-generic/mm_hooks.h>
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/alpha/include/asm/types.h linux-libre-4.4.150-gnu/arch/alpha/include/asm/types.h
--- linux-libre-4.4-gnu/arch/alpha/include/asm/types.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/alpha/include/asm/types.h	2018-08-18 04:45:38.000000000 -0400
@@ -1,6 +1,6 @@
 #ifndef _ALPHA_TYPES_H
 #define _ALPHA_TYPES_H
 
-#include <asm-generic/int-ll64.h>
+#include <uapi/asm/types.h>
 
 #endif /* _ALPHA_TYPES_H */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/alpha/include/asm/uaccess.h linux-libre-4.4.150-gnu/arch/alpha/include/asm/uaccess.h
--- linux-libre-4.4-gnu/arch/alpha/include/asm/uaccess.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/alpha/include/asm/uaccess.h	2018-08-18 04:45:38.000000000 -0400
@@ -371,14 +371,6 @@ __copy_tofrom_user_nocheck(void *to, con
 	return __cu_len;
 }
 
-extern inline long
-__copy_tofrom_user(void *to, const void *from, long len, const void __user *validate)
-{
-	if (__access_ok((unsigned long)validate, len, get_fs()))
-		len = __copy_tofrom_user_nocheck(to, from, len);
-	return len;
-}
-
 #define __copy_to_user(to, from, n)					\
 ({									\
 	__chk_user_ptr(to);						\
@@ -393,17 +385,22 @@ __copy_tofrom_user(void *to, const void
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
 
-
 extern inline long
 copy_to_user(void __user *to, const void *from, long n)
 {
-	return __copy_tofrom_user((__force void *)to, from, n, to);
+	if (likely(__access_ok((unsigned long)to, n, get_fs())))
+		n = __copy_tofrom_user_nocheck((__force void *)to, from, n);
+	return n;
 }
 
 extern inline long
 copy_from_user(void *to, const void __user *from, long n)
 {
-	return __copy_tofrom_user(to, (__force void *)from, n, from);
+	if (likely(__access_ok((unsigned long)from, n, get_fs())))
+		n = __copy_tofrom_user_nocheck(to, (__force void *)from, n);
+	else
+		memset(to, 0, n);
+	return n;
 }
 
 extern void __do_clear_user(void);
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/alpha/include/asm/xchg.h linux-libre-4.4.150-gnu/arch/alpha/include/asm/xchg.h
--- linux-libre-4.4-gnu/arch/alpha/include/asm/xchg.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/alpha/include/asm/xchg.h	2018-08-18 04:45:38.000000000 -0400
@@ -11,6 +11,10 @@
  * Atomic exchange.
  * Since it can be used to implement critical sections
  * it must clobber "memory" (also for interrupts in UP).
+ *
+ * The leading and the trailing memory barriers guarantee that these
+ * operations are fully ordered.
+ *
  */
 
 static inline unsigned long
@@ -18,6 +22,7 @@ ____xchg(_u8, volatile char *m, unsigned
 {
 	unsigned long ret, tmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%4,7,%3\n"
 	"	insbl	%1,%4,%1\n"
@@ -42,6 +47,7 @@ ____xchg(_u16, volatile short *m, unsign
 {
 	unsigned long ret, tmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%4,7,%3\n"
 	"	inswl	%1,%4,%1\n"
@@ -66,6 +72,7 @@ ____xchg(_u32, volatile int *m, unsigned
 {
 	unsigned long dummy;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldl_l %0,%4\n"
 	"	bis $31,%3,%1\n"
@@ -86,6 +93,7 @@ ____xchg(_u64, volatile long *m, unsigne
 {
 	unsigned long dummy;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l %0,%4\n"
 	"	bis $31,%3,%1\n"
@@ -127,10 +135,12 @@ ____xchg(, volatile void *ptr, unsigned
  * store NEW in MEM.  Return the initial value in MEM.  Success is
  * indicated by comparing RETURN with OLD.
  *
- * The memory barrier should be placed in SMP only when we actually
- * make the change. If we don't change anything (so if the returned
- * prev is equal to old) then we aren't acquiring anything new and
- * we don't need any memory barrier as far I can tell.
+ * The leading and the trailing memory barriers guarantee that these
+ * operations are fully ordered.
+ *
+ * The trailing memory barrier is placed in SMP unconditionally, in
+ * order to guarantee that dependency ordering is preserved when a
+ * dependency is headed by an unsuccessful operation.
  */
 
 static inline unsigned long
@@ -138,6 +148,7 @@ ____cmpxchg(_u8, volatile char *m, unsig
 {
 	unsigned long prev, tmp, cmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%5,7,%4\n"
 	"	insbl	%1,%5,%1\n"
@@ -149,8 +160,8 @@ ____cmpxchg(_u8, volatile char *m, unsig
 	"	or	%1,%2,%2\n"
 	"	stq_c	%2,0(%4)\n"
 	"	beq	%2,3f\n"
-		__ASM__MB
 	"2:\n"
+		__ASM__MB
 	".subsection 2\n"
 	"3:	br	1b\n"
 	".previous"
@@ -165,6 +176,7 @@ ____cmpxchg(_u16, volatile short *m, uns
 {
 	unsigned long prev, tmp, cmp, addr64;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"	andnot	%5,7,%4\n"
 	"	inswl	%1,%5,%1\n"
@@ -176,8 +188,8 @@ ____cmpxchg(_u16, volatile short *m, uns
 	"	or	%1,%2,%2\n"
 	"	stq_c	%2,0(%4)\n"
 	"	beq	%2,3f\n"
-		__ASM__MB
 	"2:\n"
+		__ASM__MB
 	".subsection 2\n"
 	"3:	br	1b\n"
 	".previous"
@@ -192,6 +204,7 @@ ____cmpxchg(_u32, volatile int *m, int o
 {
 	unsigned long prev, cmp;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldl_l %0,%5\n"
 	"	cmpeq %0,%3,%1\n"
@@ -199,8 +212,8 @@ ____cmpxchg(_u32, volatile int *m, int o
 	"	mov %4,%1\n"
 	"	stl_c %1,%2\n"
 	"	beq %1,3f\n"
-		__ASM__MB
 	"2:\n"
+		__ASM__MB
 	".subsection 2\n"
 	"3:	br 1b\n"
 	".previous"
@@ -215,6 +228,7 @@ ____cmpxchg(_u64, volatile long *m, unsi
 {
 	unsigned long prev, cmp;
 
+	smp_mb();
 	__asm__ __volatile__(
 	"1:	ldq_l %0,%5\n"
 	"	cmpeq %0,%3,%1\n"
@@ -222,8 +236,8 @@ ____cmpxchg(_u64, volatile long *m, unsi
 	"	mov %4,%1\n"
 	"	stq_c %1,%2\n"
 	"	beq %1,3f\n"
-		__ASM__MB
 	"2:\n"
+		__ASM__MB
 	".subsection 2\n"
 	"3:	br 1b\n"
 	".previous"
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/alpha/include/uapi/asm/types.h linux-libre-4.4.150-gnu/arch/alpha/include/uapi/asm/types.h
--- linux-libre-4.4-gnu/arch/alpha/include/uapi/asm/types.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/alpha/include/uapi/asm/types.h	2018-08-18 04:45:38.000000000 -0400
@@ -9,8 +9,18 @@
  * need to be careful to avoid a name clashes.
  */
 
-#ifndef __KERNEL__
+/*
+ * This is here because we used to use l64 for alpha
+ * and we don't want to impact user mode with our change to ll64
+ * in the kernel.
+ *
+ * However, some user programs are fine with this.  They can
+ * flag __SANE_USERSPACE_TYPES__ to get int-ll64.h here.
+ */
+#if !defined(__SANE_USERSPACE_TYPES__) && !defined(__KERNEL__)
 #include <asm-generic/int-l64.h>
+#else
+#include <asm-generic/int-ll64.h>
 #endif
 
 #endif /* _UAPI_ALPHA_TYPES_H */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/alpha/kernel/console.c linux-libre-4.4.150-gnu/arch/alpha/kernel/console.c
--- linux-libre-4.4-gnu/arch/alpha/kernel/console.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/alpha/kernel/console.c	2018-08-18 04:45:38.000000000 -0400
@@ -20,6 +20,7 @@
 struct pci_controller *pci_vga_hose;
 static struct resource alpha_vga = {
 	.name	= "alpha-vga+",
+	.flags	= IORESOURCE_IO,
 	.start	= 0x3C0,
 	.end	= 0x3DF
 };
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/alpha/kernel/osf_sys.c linux-libre-4.4.150-gnu/arch/alpha/kernel/osf_sys.c
--- linux-libre-4.4-gnu/arch/alpha/kernel/osf_sys.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/alpha/kernel/osf_sys.c	2018-08-18 04:45:38.000000000 -0400
@@ -1188,8 +1188,10 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, i
 	if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
 		return -EFAULT;
 
-	err = 0;
-	err |= put_user(status, ustatus);
+	err = put_user(status, ustatus);
+	if (ret < 0)
+		return err ? err : ret;
+
 	err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
 	err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
 	err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/alpha/kernel/pci_impl.h linux-libre-4.4.150-gnu/arch/alpha/kernel/pci_impl.h
--- linux-libre-4.4-gnu/arch/alpha/kernel/pci_impl.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/alpha/kernel/pci_impl.h	2018-08-18 04:45:38.000000000 -0400
@@ -143,7 +143,8 @@ struct pci_iommu_arena
 };
 
 #if defined(CONFIG_ALPHA_SRM) && \
-    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA))
+    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA) || \
+     defined(CONFIG_ALPHA_AVANTI))
 # define NEED_SRM_SAVE_RESTORE
 #else
 # undef NEED_SRM_SAVE_RESTORE
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/alpha/kernel/process.c linux-libre-4.4.150-gnu/arch/alpha/kernel/process.c
--- linux-libre-4.4-gnu/arch/alpha/kernel/process.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/alpha/kernel/process.c	2018-08-18 04:45:38.000000000 -0400
@@ -273,12 +273,13 @@ copy_thread(unsigned long clone_flags, u
 	   application calling fork.  */
 	if (clone_flags & CLONE_SETTLS)
 		childti->pcb.unique = regs->r20;
+	else
+		regs->r20 = 0;	/* OSF/1 has some strange fork() semantics.  */
 	childti->pcb.usp = usp ?: rdusp();
 	*childregs = *regs;
 	childregs->r0 = 0;
 	childregs->r19 = 0;
 	childregs->r20 = 1;	/* OSF/1 has some strange fork() semantics.  */
-	regs->r20 = 0;
 	stack = ((struct switch_stack *) regs) - 1;
 	*childstack = *stack;
 	childstack->r26 = (unsigned long) ret_from_fork;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/arcregs.h linux-libre-4.4.150-gnu/arch/arc/include/asm/arcregs.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/arcregs.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/arcregs.h	2018-08-18 04:45:38.000000000 -0400
@@ -374,12 +374,6 @@ static inline int is_isa_arcompact(void)
 	return IS_ENABLED(CONFIG_ISA_ARCOMPACT);
 }
 
-#if defined(CONFIG_ISA_ARCOMPACT) && !defined(_CPU_DEFAULT_A7)
-#error "Toolchain not configured for ARCompact builds"
-#elif defined(CONFIG_ISA_ARCV2) && !defined(_CPU_DEFAULT_HS)
-#error "Toolchain not configured for ARCv2 builds"
-#endif
-
 #endif /* __ASEMBLY__ */
 
 #endif /* _ASM_ARC_ARCREGS_H */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/bitops.h linux-libre-4.4.150-gnu/arch/arc/include/asm/bitops.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/bitops.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/bitops.h	2018-08-18 04:45:38.000000000 -0400
@@ -35,21 +35,6 @@ static inline void op##_bit(unsigned lon
 									\
 	m += nr >> 5;							\
 									\
-	/*								\
-	 * ARC ISA micro-optimization:					\
-	 *								\
-	 * Instructions dealing with bitpos only consider lower 5 bits	\
-	 * e.g (x << 33) is handled like (x << 1) by ASL instruction	\
-	 *  (mem pointer still needs adjustment to point to next word)	\
-	 *								\
-	 * Hence the masking to clamp @nr arg can be elided in general.	\
-	 *								\
-	 * However if @nr is a constant (above assumed in a register),	\
-	 * and greater than 31, gcc can optimize away (x << 33) to 0,	\
-	 * as overflow, given the 32-bit ISA. Thus masking needs to be	\
-	 * done for const @nr, but no code is generated due to gcc	\
-	 * const prop.							\
-	 */								\
 	nr &= 0x1f;							\
 									\
 	__asm__ __volatile__(						\
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/cacheflush.h linux-libre-4.4.150-gnu/arch/arc/include/asm/cacheflush.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/cacheflush.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/cacheflush.h	2018-08-18 04:45:38.000000000 -0400
@@ -85,6 +85,10 @@ void flush_anon_page(struct vm_area_stru
  */
 #define PG_dc_clean	PG_arch_1
 
+#define CACHE_COLORS_NUM	4
+#define CACHE_COLORS_MSK	(CACHE_COLORS_NUM - 1)
+#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & CACHE_COLORS_MSK)
+
 /*
  * Simple wrapper over config option
  * Bootup code ensures that hardware matches kernel configuration
@@ -94,8 +98,6 @@ static inline int cache_is_vipt_aliasing
 	return IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
 }
 
-#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & 1)
-
 /*
  * checks if two addresses (after page aligning) index into same cache set
  */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/cache.h linux-libre-4.4.150-gnu/arch/arc/include/asm/cache.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/cache.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/cache.h	2018-08-18 04:45:38.000000000 -0400
@@ -88,7 +88,9 @@ extern int ioc_exists;
 #define ARC_REG_SLC_FLUSH	0x904
 #define ARC_REG_SLC_INVALIDATE	0x905
 #define ARC_REG_SLC_RGN_START	0x914
+#define ARC_REG_SLC_RGN_START1	0x915
 #define ARC_REG_SLC_RGN_END	0x916
+#define ARC_REG_SLC_RGN_END1	0x917
 
 /* Bit val in SLC_CONTROL */
 #define SLC_CTRL_IM		0x040
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/delay.h linux-libre-4.4.150-gnu/arch/arc/include/asm/delay.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/delay.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/delay.h	2018-08-18 04:45:38.000000000 -0400
@@ -22,10 +22,13 @@
 static inline void __delay(unsigned long loops)
 {
 	__asm__ __volatile__(
-	"	lp  1f	\n"
-	"	nop	\n"
-	"1:		\n"
-	: "+l"(loops));
+	"	mov lp_count, %0	\n"
+	"	lp  1f			\n"
+	"	nop			\n"
+	"1:				\n"
+	:
+        : "r"(loops)
+        : "lp_count");
 }
 
 extern void __bad_udelay(void);
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/entry-arcv2.h linux-libre-4.4.150-gnu/arch/arc/include/asm/entry-arcv2.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/entry-arcv2.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/entry-arcv2.h	2018-08-18 04:45:38.000000000 -0400
@@ -16,6 +16,7 @@
 	;
 	; Now manually save: r12, sp, fp, gp, r25
 
+	PUSH	r30
 	PUSH	r12
 
 	; Saving pt_regs->sp correctly requires some extra work due to the way
@@ -72,6 +73,7 @@
 	POPAX	AUX_USER_SP
 1:
 	POP	r12
+	POP	r30
 
 .endm
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/entry.h linux-libre-4.4.150-gnu/arch/arc/include/asm/entry.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/entry.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/entry.h	2018-08-18 04:45:38.000000000 -0400
@@ -142,7 +142,7 @@
 
 #ifdef CONFIG_ARC_CURR_IN_REG
 	; Retrieve orig r25 and save it with rest of callee_regs
-	ld.as   r12, [r12, PT_user_r25]
+	ld	r12, [r12, PT_user_r25]
 	PUSH	r12
 #else
 	PUSH	r25
@@ -198,7 +198,7 @@
 
 	; SP is back to start of pt_regs
 #ifdef CONFIG_ARC_CURR_IN_REG
-	st.as   r12, [sp, PT_user_r25]
+	st	r12, [sp, PT_user_r25]
 #endif
 .endm
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/futex.h linux-libre-4.4.150-gnu/arch/arc/include/asm/futex.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/futex.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/futex.h	2018-08-18 04:45:38.000000000 -0400
@@ -73,20 +73,11 @@
 
 #endif
 
-static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
+		u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret;
 
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
-		return -EFAULT;
-
 #ifndef CONFIG_ARC_HAS_LLSC
 	preempt_disable();	/* to guarantee atomic r-m-w of futex op */
 #endif
@@ -118,30 +109,9 @@ static inline int futex_atomic_op_inuser
 	preempt_enable();
 #endif
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ:
-			ret = (oldval == cmparg);
-			break;
-		case FUTEX_OP_CMP_NE:
-			ret = (oldval != cmparg);
-			break;
-		case FUTEX_OP_CMP_LT:
-			ret = (oldval < cmparg);
-			break;
-		case FUTEX_OP_CMP_GE:
-			ret = (oldval >= cmparg);
-			break;
-		case FUTEX_OP_CMP_LE:
-			ret = (oldval <= cmparg);
-			break;
-		case FUTEX_OP_CMP_GT:
-			ret = (oldval > cmparg);
-			break;
-		default:
-			ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/io.h linux-libre-4.4.150-gnu/arch/arc/include/asm/io.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/io.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/io.h	2018-08-18 04:45:38.000000000 -0400
@@ -13,6 +13,15 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 
+#ifdef CONFIG_ISA_ARCV2
+#include <asm/barrier.h>
+#define __iormb()		rmb()
+#define __iowmb()		wmb()
+#else
+#define __iormb()		do { } while (0)
+#define __iowmb()		do { } while (0)
+#endif
+
 extern void __iomem *ioremap(unsigned long physaddr, unsigned long size);
 extern void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
 				  unsigned long flags);
@@ -22,6 +31,15 @@ extern void iounmap(const void __iomem *
 #define ioremap_wc(phy, sz)		ioremap(phy, sz)
 #define ioremap_wt(phy, sz)		ioremap(phy, sz)
 
+/*
+ * io{read,write}{16,32}be() macros
+ */
+#define ioread16be(p)		({ u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
+#define ioread32be(p)		({ u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
+
+#define iowrite16be(v,p)	({ __iowmb(); __raw_writew((__force u16)cpu_to_be16(v), p); })
+#define iowrite32be(v,p)	({ __iowmb(); __raw_writel((__force u32)cpu_to_be32(v), p); })
+
 /* Change struct page to physical address */
 #define page_to_phys(page)		(page_to_pfn(page) << PAGE_SHIFT)
 
@@ -99,15 +117,6 @@ static inline void __raw_writel(u32 w, v
 
 }
 
-#ifdef CONFIG_ISA_ARCV2
-#include <asm/barrier.h>
-#define __iormb()		rmb()
-#define __iowmb()		wmb()
-#else
-#define __iormb()		do { } while (0)
-#define __iowmb()		do { } while (0)
-#endif
-
 /*
  * MMIO can also get buffered/optimized in micro-arch, so barriers needed
  * Based on ARM model for the typical use case
@@ -129,15 +138,23 @@ static inline void __raw_writel(u32 w, v
 #define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
 
 /*
- * Relaxed API for drivers which can handle any ordering themselves
+ * Relaxed API for drivers which can handle barrier ordering themselves
+ *
+ * Also these are defined to perform little endian accesses.
+ * To provide the typical device register semantics of fixed endian,
+ * swap the byte order for Big Endian
+ *
+ * http://lkml.kernel.org/r/201603100845.30602.arnd@arndb.de
  */
 #define readb_relaxed(c)	__raw_readb(c)
-#define readw_relaxed(c)	__raw_readw(c)
-#define readl_relaxed(c)	__raw_readl(c)
+#define readw_relaxed(c) ({ u16 __r = le16_to_cpu((__force __le16) \
+					__raw_readw(c)); __r; })
+#define readl_relaxed(c) ({ u32 __r = le32_to_cpu((__force __le32) \
+					__raw_readl(c)); __r; })
 
 #define writeb_relaxed(v,c)	__raw_writeb(v,c)
-#define writew_relaxed(v,c)	__raw_writew(v,c)
-#define writel_relaxed(v,c)	__raw_writel(v,c)
+#define writew_relaxed(v,c)	__raw_writew((__force u16) cpu_to_le16(v),c)
+#define writel_relaxed(v,c)	__raw_writel((__force u32) cpu_to_le32(v),c)
 
 #include <asm-generic/io.h>
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/irqflags-arcv2.h linux-libre-4.4.150-gnu/arch/arc/include/asm/irqflags-arcv2.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/irqflags-arcv2.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/irqflags-arcv2.h	2018-08-18 04:45:38.000000000 -0400
@@ -22,6 +22,7 @@
 #define AUX_IRQ_CTRL		0x00E
 #define AUX_IRQ_ACT		0x043	/* Active Intr across all levels */
 #define AUX_IRQ_LVL_PEND	0x200	/* Pending Intr across all levels */
+#define AUX_IRQ_HINT		0x201	/* For generating Soft Interrupts */
 #define AUX_IRQ_PRIORITY	0x206
 #define ICAUSE			0x40a
 #define AUX_IRQ_SELECT		0x40b
@@ -112,6 +113,16 @@ static inline int arch_irqs_disabled(voi
 	return arch_irqs_disabled_flags(arch_local_save_flags());
 }
 
+static inline void arc_softirq_trigger(int irq)
+{
+	write_aux_reg(AUX_IRQ_HINT, irq);
+}
+
+static inline void arc_softirq_clear(int irq)
+{
+	write_aux_reg(AUX_IRQ_HINT, 0);
+}
+
 #else
 
 .macro IRQ_DISABLE  scratch
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/irqflags-compact.h linux-libre-4.4.150-gnu/arch/arc/include/asm/irqflags-compact.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/irqflags-compact.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/irqflags-compact.h	2018-08-18 04:45:38.000000000 -0400
@@ -188,10 +188,10 @@ static inline int arch_irqs_disabled(voi
 .endm
 
 .macro IRQ_ENABLE  scratch
+	TRACE_ASM_IRQ_ENABLE
 	lr	\scratch, [status32]
 	or	\scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
 	flag	\scratch
-	TRACE_ASM_IRQ_ENABLE
 .endm
 
 #endif	/* __ASSEMBLY__ */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/page.h linux-libre-4.4.150-gnu/arch/arc/include/asm/page.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/page.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/page.h	2018-08-18 04:45:38.000000000 -0400
@@ -102,7 +102,7 @@ typedef pte_t * pgtable_t;
 #define virt_addr_valid(kaddr)  pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
 
 /* Default Permissions for stack/heaps pages (Non Executable) */
-#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE)
+#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
 #define WANT_PAGE_VIRTUAL   1
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/pgtable.h linux-libre-4.4.150-gnu/arch/arc/include/asm/pgtable.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/pgtable.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/pgtable.h	2018-08-18 04:45:38.000000000 -0400
@@ -110,7 +110,7 @@
 #define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE)
 
 /* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_SPECIAL)
 
 /* More Abbrevaited helpers */
 #define PAGE_U_NONE     __pgprot(___DEF)
@@ -277,8 +277,7 @@ static inline void pmd_set(pmd_t *pmdp,
 
 #define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
 #define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-#define pfn_pte(pfn, prot)	(__pte(((pte_t)(pfn) << PAGE_SHIFT) | \
-				 pgprot_val(prot)))
+#define pfn_pte(pfn, prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
 #define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 
 /*
@@ -373,7 +372,7 @@ void update_mmu_cache(struct vm_area_str
 
 /* Decode a PTE containing swap "identifier "into constituents */
 #define __swp_type(pte_lookalike)	(((pte_lookalike).val) & 0x1f)
-#define __swp_offset(pte_lookalike)	((pte_lookalike).val << 13)
+#define __swp_offset(pte_lookalike)	((pte_lookalike).val >> 13)
 
 /* NOPs, to keep generic kernel happy */
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/ptrace.h linux-libre-4.4.150-gnu/arch/arc/include/asm/ptrace.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/ptrace.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/ptrace.h	2018-08-18 04:45:38.000000000 -0400
@@ -84,7 +84,7 @@ struct pt_regs {
 	unsigned long fp;
 	unsigned long sp;	/* user/kernel sp depending on where we came from  */
 
-	unsigned long r12;
+	unsigned long r12, r30;
 
 	/*------- Below list auto saved by h/w -----------*/
 	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/include/asm/uaccess.h linux-libre-4.4.150-gnu/arch/arc/include/asm/uaccess.h
--- linux-libre-4.4-gnu/arch/arc/include/asm/uaccess.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/include/asm/uaccess.h	2018-08-18 04:45:38.000000000 -0400
@@ -83,7 +83,10 @@
 	"2:	;nop\n"				\
 	"	.section .fixup, \"ax\"\n"	\
 	"	.align 4\n"			\
-	"3:	mov %0, %3\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
 	"	j   2b\n"			\
 	"	.previous\n"			\
 	"	.section __ex_table, \"a\"\n"	\
@@ -101,7 +104,11 @@
 	"2:	;nop\n"				\
 	"	.section .fixup, \"ax\"\n"	\
 	"	.align 4\n"			\
-	"3:	mov %0, %3\n"			\
+	"3:	# return -EFAULT\n"		\
+	"	mov %0, %3\n"			\
+	"	# zero out dst ptr\n"		\
+	"	mov %1,  0\n"			\
+	"	mov %R1, 0\n"			\
 	"	j   2b\n"			\
 	"	.previous\n"			\
 	"	.section __ex_table, \"a\"\n"	\
@@ -666,6 +673,7 @@ __arc_strncpy_from_user(char *dst, const
 		return 0;
 
 	__asm__ __volatile__(
+	"	mov	lp_count, %5		\n"
 	"	lp	3f			\n"
 	"1:	ldb.ab  %3, [%2, 1]		\n"
 	"	breq.d	%3, 0, 3f               \n"
@@ -682,8 +690,8 @@ __arc_strncpy_from_user(char *dst, const
 	"	.word   1b, 4b			\n"
 	"	.previous			\n"
 	: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
-	: "g"(-EFAULT), "l"(count)
-	: "memory");
+	: "g"(-EFAULT), "r"(count)
+	: "lp_count", "lp_start", "lp_end", "memory");
 
 	return res;
 }
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/Kconfig linux-libre-4.4.150-gnu/arch/arc/Kconfig
--- linux-libre-4.4-gnu/arch/arc/Kconfig	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/Kconfig	2018-08-18 04:45:38.000000000 -0400
@@ -387,7 +387,7 @@ config ARC_HAS_LLSC
 
 config ARC_STAR_9000923308
 	bool "Workaround for llock/scond livelock"
-	default y
+	default n
 	depends on ISA_ARCV2 && SMP && ARC_HAS_LLSC
 
 config ARC_HAS_SWAPE
@@ -479,7 +479,6 @@ config ARC_CURR_IN_REG
 
 config ARC_EMUL_UNALIGNED
 	bool "Emulate unaligned memory access (userspace only)"
-	default N
 	select SYSCTL_ARCH_UNALIGN_NO_WARN
 	select SYSCTL_ARCH_UNALIGN_ALLOW
 	depends on ISA_ARCOMPACT
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/kernel/entry-arcv2.S linux-libre-4.4.150-gnu/arch/arc/kernel/entry-arcv2.S
--- linux-libre-4.4-gnu/arch/arc/kernel/entry-arcv2.S	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/kernel/entry-arcv2.S	2018-08-18 04:45:38.000000000 -0400
@@ -45,11 +45,12 @@ VECTOR	reserved		; Reserved slots
 VECTOR	handle_interrupt	; (16) Timer0
 VECTOR	handle_interrupt	; unused (Timer1)
 VECTOR	handle_interrupt	; unused (WDT)
-VECTOR	handle_interrupt	; (19) ICI (inter core interrupt)
-VECTOR	handle_interrupt
-VECTOR	handle_interrupt
-VECTOR	handle_interrupt
-VECTOR	handle_interrupt	; (23) End of fixed IRQs
+VECTOR	handle_interrupt	; (19) Inter core Interrupt (IPI)
+VECTOR	handle_interrupt	; (20) perf Interrupt
+VECTOR	handle_interrupt	; (21) Software Triggered Intr (Self IPI)
+VECTOR	handle_interrupt	; unused
+VECTOR	handle_interrupt	; (23) unused
+# End of fixed IRQs
 
 .rept CONFIG_ARC_NUMBER_OF_INTERRUPTS - 8
 	VECTOR	handle_interrupt
@@ -211,7 +212,11 @@ debug_marker_syscall:
 ; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig
 ; entry was via Exception in DS which got preempted in kernel).
 ;
-; IRQ RTIE won't reliably restore DE bit and/or BTA, needs handling
+; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround
+;
+; Solution is return from Intr w/o any delay slot quirks into a kernel trampoline
+; and from pure kernel mode return to delay slot which handles DS bit/BTA correctly
+
 .Lintr_ret_to_delay_slot:
 debug_marker_ds:
 
@@ -222,18 +227,23 @@ debug_marker_ds:
 	ld	r2, [sp, PT_ret]
 	ld	r3, [sp, PT_status32]
 
+	; STAT32 for Int return created from scratch
+	; (No delay dlot, disable Further intr in trampoline)
+
 	bic  	r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK
 	st	r0, [sp, PT_status32]
 
 	mov	r1, .Lintr_ret_to_delay_slot_2
 	st	r1, [sp, PT_ret]
 
+	; Orig exception PC/STAT32 safekept @orig_r0 and @event stack slots
 	st	r2, [sp, 0]
 	st	r3, [sp, 4]
 
 	b	.Lisr_ret_fast_path
 
 .Lintr_ret_to_delay_slot_2:
+	; Trampoline to restore orig exception PC/STAT32/BTA/AUX_USER_SP
 	sub	sp, sp, SZ_PT_REGS
 	st	r9, [sp, -4]
 
@@ -243,11 +253,19 @@ debug_marker_ds:
 	ld	r9, [sp, 4]
 	sr	r9, [erstatus]
 
+	; restore AUX_USER_SP if returning to U mode
+	bbit0	r9, STATUS_U_BIT, 1f
+	ld	r9, [sp, PT_sp]
+	sr	r9, [AUX_USER_SP]
+
+1:
 	ld	r9, [sp, 8]
 	sr	r9, [erbta]
 
 	ld	r9, [sp, -4]
 	add	sp, sp, SZ_PT_REGS
+
+	; return from pure kernel mode to delay slot
 	rtie
 
 END(ret_from_exception)
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/kernel/entry.S linux-libre-4.4.150-gnu/arch/arc/kernel/entry.S
--- linux-libre-4.4-gnu/arch/arc/kernel/entry.S	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/kernel/entry.S	2018-08-18 04:45:38.000000000 -0400
@@ -104,6 +104,12 @@ ENTRY(EV_MachineCheck)
 	lr  r0, [efa]
 	mov r1, sp
 
+	; hardware auto-disables MMU, re-enable it to allow kernel vaddr
+	; access for say stack unwinding of modules for crash dumps
+	lr	r3, [ARC_REG_PID]
+	or	r3, r3, MMU_ENABLE
+	sr	r3, [ARC_REG_PID]
+
 	lsr  	r3, r2, 8
 	bmsk 	r3, r3, 7
 	brne    r3, ECR_C_MCHK_DUP_TLB, 1f
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/kernel/mcip.c linux-libre-4.4.150-gnu/arch/arc/kernel/mcip.c
--- linux-libre-4.4-gnu/arch/arc/kernel/mcip.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/kernel/mcip.c	2018-08-18 04:45:38.000000000 -0400
@@ -11,9 +11,12 @@
 #include <linux/smp.h>
 #include <linux/irq.h>
 #include <linux/spinlock.h>
+#include <asm/irqflags-arcv2.h>
 #include <asm/mcip.h>
 #include <asm/setup.h>
 
+#define SOFTIRQ_IRQ	21
+
 static char smp_cpuinfo_buf[128];
 static int idu_detected;
 
@@ -22,6 +25,7 @@ static DEFINE_RAW_SPINLOCK(mcip_lock);
 static void mcip_setup_per_cpu(int cpu)
 {
 	smp_ipi_irq_setup(cpu, IPI_IRQ);
+	smp_ipi_irq_setup(cpu, SOFTIRQ_IRQ);
 }
 
 static void mcip_ipi_send(int cpu)
@@ -29,6 +33,12 @@ static void mcip_ipi_send(int cpu)
 	unsigned long flags;
 	int ipi_was_pending;
 
+	/* ARConnect can only send IPI to others */
+	if (unlikely(cpu == raw_smp_processor_id())) {
+		arc_softirq_trigger(SOFTIRQ_IRQ);
+		return;
+	}
+
 	/*
 	 * NOTE: We must spin here if the other cpu hasn't yet
 	 * serviced a previous message. This can burn lots
@@ -63,6 +73,11 @@ static void mcip_ipi_clear(int irq)
 	unsigned long flags;
 	unsigned int __maybe_unused copy;
 
+	if (unlikely(irq == SOFTIRQ_IRQ)) {
+		arc_softirq_clear(irq);
+		return;
+	}
+
 	raw_spin_lock_irqsave(&mcip_lock, flags);
 
 	/* Who sent the IPI */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/kernel/setup.c linux-libre-4.4.150-gnu/arch/arc/kernel/setup.c
--- linux-libre-4.4-gnu/arch/arc/kernel/setup.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/kernel/setup.c	2018-08-18 04:45:38.000000000 -0400
@@ -332,10 +332,6 @@ static void arc_chk_core_config(void)
 		pr_warn("CONFIG_ARC_FPU_SAVE_RESTORE needed for working apps\n");
 	else if (!cpu->extn.fpu_dp && fpu_enabled)
 		panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n");
-
-	if (is_isa_arcv2() && IS_ENABLED(CONFIG_SMP) && cpu->isa.atomic &&
-	    !IS_ENABLED(CONFIG_ARC_STAR_9000923308))
-		panic("llock/scond livelock workaround missing\n");
 }
 
 /*
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/kernel/signal.c linux-libre-4.4.150-gnu/arch/arc/kernel/signal.c
--- linux-libre-4.4-gnu/arch/arc/kernel/signal.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/kernel/signal.c	2018-08-18 04:45:38.000000000 -0400
@@ -107,13 +107,13 @@ static int restore_usr_regs(struct pt_re
 	struct user_regs_struct uregs;
 
 	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
-	if (!err)
-		set_current_blocked(&set);
-
 	err |= __copy_from_user(&uregs.scratch,
 				&(sf->uc.uc_mcontext.regs.scratch),
 				sizeof(sf->uc.uc_mcontext.regs.scratch));
+	if (err)
+		return err;
 
+	set_current_blocked(&set);
 	regs->bta	= uregs.scratch.bta;
 	regs->lp_start	= uregs.scratch.lp_start;
 	regs->lp_end	= uregs.scratch.lp_end;
@@ -138,7 +138,7 @@ static int restore_usr_regs(struct pt_re
 	regs->r0	= uregs.scratch.r0;
 	regs->sp	= uregs.scratch.sp;
 
-	return err;
+	return 0;
 }
 
 static inline int is_do_ss_needed(unsigned int magic)
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/kernel/stacktrace.c linux-libre-4.4.150-gnu/arch/arc/kernel/stacktrace.c
--- linux-libre-4.4-gnu/arch/arc/kernel/stacktrace.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/kernel/stacktrace.c	2018-08-18 04:45:38.000000000 -0400
@@ -142,7 +142,7 @@ arc_unwind_core(struct task_struct *tsk,
 	 * prelogue is setup (callee regs saved and then fp set and not other
 	 * way around
 	 */
-	pr_warn("CONFIG_ARC_DW2_UNWIND needs to be enabled\n");
+	pr_warn_once("CONFIG_ARC_DW2_UNWIND needs to be enabled\n");
 	return 0;
 
 #endif
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/kernel/time.c linux-libre-4.4.150-gnu/arch/arc/kernel/time.c
--- linux-libre-4.4-gnu/arch/arc/kernel/time.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/kernel/time.c	2018-08-18 04:45:38.000000000 -0400
@@ -130,14 +130,17 @@ static cycle_t arc_counter_read(struct c
 		cycle_t  full;
 	} stamp;
 
-
-	__asm__ __volatile(
-	"1:						\n"
-	"	lr		%0, [AUX_RTC_LOW]	\n"
-	"	lr		%1, [AUX_RTC_HIGH]	\n"
-	"	lr		%2, [AUX_RTC_CTRL]	\n"
-	"	bbit0.nt	%2, 31, 1b		\n"
-	: "=r" (stamp.low), "=r" (stamp.high), "=r" (status));
+	/*
+	 * hardware has an internal state machine which tracks readout of
+	 * low/high and updates the CTRL.status if
+	 *  - interrupt/exception taken between the two reads
+	 *  - high increments after low has been read
+	 */
+	do {
+		stamp.low = read_aux_reg(AUX_RTC_LOW);
+		stamp.high = read_aux_reg(AUX_RTC_HIGH);
+		status = read_aux_reg(AUX_RTC_CTRL);
+	} while (!(status & _BITUL(31)));
 
 	return stamp.full;
 }
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/kernel/unaligned.c linux-libre-4.4.150-gnu/arch/arc/kernel/unaligned.c
--- linux-libre-4.4-gnu/arch/arc/kernel/unaligned.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/kernel/unaligned.c	2018-08-18 04:45:38.000000000 -0400
@@ -241,8 +241,9 @@ int misaligned_fixup(unsigned long addre
 	if (state.fault)
 		goto fault;
 
+	/* clear any remanants of delay slot */
 	if (delay_mode(regs)) {
-		regs->ret = regs->bta;
+		regs->ret = regs->bta & ~1U;
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/Makefile linux-libre-4.4.150-gnu/arch/arc/Makefile
--- linux-libre-4.4-gnu/arch/arc/Makefile	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/Makefile	2018-08-18 04:45:38.000000000 -0400
@@ -18,6 +18,20 @@ cflags-y	+= -fno-common -pipe -fno-built
 cflags-$(CONFIG_ISA_ARCOMPACT)	+= -mA7
 cflags-$(CONFIG_ISA_ARCV2)	+= -mcpu=archs
 
+is_700 = $(shell $(CC) -dM -E - < /dev/null | grep -q "ARC700" && echo 1 || echo 0)
+
+ifdef CONFIG_ISA_ARCOMPACT
+ifeq ($(is_700), 0)
+    $(error Toolchain not configured for ARCompact builds)
+endif
+endif
+
+ifdef CONFIG_ISA_ARCV2
+ifeq ($(is_700), 1)
+    $(error Toolchain not configured for ARCv2 builds)
+endif
+endif
+
 ifdef CONFIG_ARC_CURR_IN_REG
 # For a global register defintion, make sure it gets passed to every file
 # We had a customer reported bug where some code built in kernel was NOT using
@@ -48,8 +62,6 @@ endif
 
 endif
 
-cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables
-
 # By default gcc 4.8 generates dwarf4 which kernel unwinder can't grok
 ifeq ($(atleast_gcc48),y)
 cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -gdwarf-2
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/mm/cache.c linux-libre-4.4.150-gnu/arch/arc/mm/cache.c
--- linux-libre-4.4-gnu/arch/arc/mm/cache.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/mm/cache.c	2018-08-18 04:45:38.000000000 -0400
@@ -543,6 +543,7 @@ noinline void slc_op(phys_addr_t paddr,
 	static DEFINE_SPINLOCK(lock);
 	unsigned long flags;
 	unsigned int ctrl;
+	phys_addr_t end;
 
 	spin_lock_irqsave(&lock, flags);
 
@@ -572,8 +573,16 @@ noinline void slc_op(phys_addr_t paddr,
 	 * END needs to be setup before START (latter triggers the operation)
 	 * END can't be same as START, so add (l2_line_sz - 1) to sz
 	 */
-	write_aux_reg(ARC_REG_SLC_RGN_END, (paddr + sz + l2_line_sz - 1));
-	write_aux_reg(ARC_REG_SLC_RGN_START, paddr);
+	end = paddr + sz + l2_line_sz - 1;
+	if (is_pae40_enabled())
+		write_aux_reg(ARC_REG_SLC_RGN_END1, upper_32_bits(end));
+
+	write_aux_reg(ARC_REG_SLC_RGN_END, lower_32_bits(end));
+
+	if (is_pae40_enabled())
+		write_aux_reg(ARC_REG_SLC_RGN_START1, upper_32_bits(paddr));
+
+	write_aux_reg(ARC_REG_SLC_RGN_START, lower_32_bits(paddr));
 
 	while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
 
@@ -914,6 +923,15 @@ void arc_cache_init(void)
 
 	printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
 
+	/*
+	 * Only master CPU needs to execute rest of function:
+	 *  - Assume SMP so all cores will have same cache config so
+	 *    any geomtry checks will be same for all
+	 *  - IOC setup / dma callbacks only need to be setup once
+	 */
+	if (cpu)
+		return;
+
 	if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
 		struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
 
@@ -951,11 +969,16 @@ void arc_cache_init(void)
 		/* check for D-Cache aliasing on ARCompact: ARCv2 has PIPT */
 		if (is_isa_arcompact()) {
 			int handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
+			int num_colors = dc->sz_k/dc->assoc/TO_KB(PAGE_SIZE);
 
-			if (dc->alias && !handled)
-				panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
-			else if (!dc->alias && handled)
+			if (dc->alias) {
+				if (!handled)
+					panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
+				if (CACHE_COLORS_NUM != num_colors)
+					panic("CACHE_COLORS_NUM not optimized for config\n");
+			} else if (!dc->alias && handled) {
 				panic("Disable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
+			}
 		}
 	}
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/mm/mmap.c linux-libre-4.4.150-gnu/arch/arc/mm/mmap.c
--- linux-libre-4.4-gnu/arch/arc/mm/mmap.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/mm/mmap.c	2018-08-18 04:45:38.000000000 -0400
@@ -64,7 +64,7 @@ arch_get_unmapped_area(struct file *filp
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vma->vm_start))
+		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arc/mm/tlb.c linux-libre-4.4.150-gnu/arch/arc/mm/tlb.c
--- linux-libre-4.4-gnu/arch/arc/mm/tlb.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arc/mm/tlb.c	2018-08-18 04:45:38.000000000 -0400
@@ -885,9 +885,6 @@ void do_tlb_overlap_fault(unsigned long
 
 	local_irq_save(flags);
 
-	/* re-enable the MMU */
-	write_aux_reg(ARC_REG_PID, MMU_ENABLE | read_aux_reg(ARC_REG_PID));
-
 	/* loop thru all sets of TLB */
 	for (set = 0; set < mmu->sets; set++) {
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/compressed/head.S linux-libre-4.4.150-gnu/arch/arm/boot/compressed/head.S
--- linux-libre-4.4-gnu/arch/arm/boot/compressed/head.S	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/compressed/head.S	2018-08-18 04:45:38.000000000 -0400
@@ -776,7 +776,7 @@ __armv7_mmu_cache_on:
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
 		bic     r6, r6, #1 << 31        @ 32-bit translation system
-		bic     r6, r6, #3 << 0         @ use only ttbr0
+		bic     r6, r6, #(7 << 0) | (1 << 4)	@ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/am335x-evmsk.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/am335x-evmsk.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/am335x-evmsk.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/am335x-evmsk.dts	2018-08-18 04:45:38.000000000 -0400
@@ -668,6 +668,7 @@
 	ti,non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/am33xx.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/am33xx.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/am33xx.dtsi	2016-01-10 21:16:10.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/am33xx.dtsi	2018-08-18 10:36:05.000000000 -0400
@@ -142,10 +142,11 @@
 				};
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x800>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+					ranges = <0 0 0x800>;
 
 					scm_clocks: clocks {
 						#address-cells = <1>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/am4372.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/am4372.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/am4372.dtsi	2016-01-10 21:16:13.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/am4372.dtsi	2018-08-18 10:36:08.000000000 -0400
@@ -807,7 +807,8 @@
 			reg = <0x48038000 0x2000>,
 			      <0x46000000 0x400000>;
 			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 8>,
@@ -821,7 +822,8 @@
 			reg = <0x4803C000 0x2000>,
 			      <0x46400000 0x400000>;
 			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
 			dmas = <&edma 10>,
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/am43x-epos-evm.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/am43x-epos-evm.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/am43x-epos-evm.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/am43x-epos-evm.dts	2018-08-18 04:45:38.000000000 -0400
@@ -792,3 +792,8 @@
 	tx-num-evt = <32>;
 	rx-num-evt = <32>;
 };
+
+&synctimer_32kclk {
+	assigned-clocks = <&mux_synctimer32k_ck>;
+	assigned-clock-parents = <&clkdiv32k_ick>;
+};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/am57xx-beagle-x15.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/am57xx-beagle-x15.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/am57xx-beagle-x15.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/am57xx-beagle-x15.dts	2018-08-18 04:45:38.000000000 -0400
@@ -411,6 +411,7 @@
 		interrupt-controller;
 
 		ti,system-power-controller;
+		ti,palmas-override-powerhold;
 
 		tps659038_pmic {
 			compatible = "ti,tps659038-pmic";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-375.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-375.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-375.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-375.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -176,9 +176,9 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
-				arm,double-linefill-incr = <1>;
+				arm,double-linefill-incr = <0>;
 				arm,double-linefill-wrap = <0>;
-				arm,double-linefill = <1>;
+				arm,double-linefill = <0>;
 				prefetch-data = <1>;
 			};
 
@@ -529,7 +529,7 @@
 			};
 
 			sata@a0000 {
-				compatible = "marvell,orion-sata";
+				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gateclk 14>, <&gateclk 20>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-385-linksys.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-385-linksys.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-385-linksys.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-385-linksys.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -58,8 +58,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
 
@@ -117,7 +117,7 @@
 			};
 
 			/* USB part of the eSATA/USB 2.0 port */
-			usb@50000 {
+			usb@58000 {
 				status = "okay";
 			};
 
@@ -245,7 +245,7 @@
 		button@2 {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -260,7 +260,7 @@
 		};
 
 		sata {
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 	};
@@ -313,7 +313,7 @@
 
 &pinctrl {
 	keys_pin: keys-pin {
-		marvell,pins = "mpp24", "mpp47";
+		marvell,pins = "mpp24", "mpp29";
 		marvell,function = "gpio";
 	};
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-388-gp.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-388-gp.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-388-gp.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-388-gp.dts	2018-08-18 04:45:38.000000000 -0400
@@ -89,7 +89,7 @@
 					pinctrl-names = "default";
 					pinctrl-0 = <&pca0_pins>;
 					interrupt-parent = <&gpio0>;
-					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupt-controller;
@@ -101,7 +101,7 @@
 					compatible = "nxp,pca9555";
 					pinctrl-names = "default";
 					interrupt-parent = <&gpio0>;
-					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupt-controller;
@@ -294,16 +294,6 @@
 	};
 
 	reg_usb2_1_vbus: v5-vbus1 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-vbus1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
-		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usb2_1_vbus: v5-vbus1 {
 		compatible = "regulator-fixed";
 		regulator-name = "v5.0-vbus1";
 		regulator-min-microvolt = <5000000>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-38x.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-38x.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-38x.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-38x.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -143,9 +143,9 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
-				arm,double-linefill-incr = <1>;
+				arm,double-linefill-incr = <0>;
 				arm,double-linefill-wrap = <0>;
-				arm,double-linefill = <1>;
+				arm,double-linefill = <0>;
 				prefetch-data = <1>;
 			};
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-390.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-390.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-390.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-390.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -47,6 +47,8 @@
 #include "armada-39x.dtsi"
 
 / {
+	compatible = "marvell,armada390";
+
 	soc {
 		internal-regs {
 			pinctrl@18000 {
@@ -54,4 +56,5 @@
 				reg = <0x18000 0x20>;
 			};
 		};
+	};
 };
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-39x.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-39x.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-39x.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-39x.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -104,9 +104,9 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
-				arm,double-linefill-incr = <1>;
+				arm,double-linefill-incr = <0>;
 				arm,double-linefill-wrap = <0>;
-				arm,double-linefill = <1>;
+				arm,double-linefill = <0>;
 				prefetch-data = <1>;
 			};
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-axpwifiap.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-axpwifiap.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-axpwifiap.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-axpwifiap.dts	2018-08-18 04:45:38.000000000 -0400
@@ -70,8 +70,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-db.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-db.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-db.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-db.dts	2018-08-18 04:45:38.000000000 -0400
@@ -76,8 +76,8 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		devbus-bootcs {
 			status = "okay";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-gp.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-gp.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-gp.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-gp.dts	2018-08-18 04:45:38.000000000 -0400
@@ -95,8 +95,8 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		devbus-bootcs {
 			status = "okay";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts	2018-08-18 04:45:38.000000000 -0400
@@ -65,8 +65,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
 			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-linksys-mamba.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-linksys-mamba.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-linksys-mamba.dts	2018-08-18 04:45:38.000000000 -0400
@@ -70,8 +70,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
@@ -304,13 +304,13 @@
 		button@1 {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 		};
 
 		button@2 {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 		};
 	};
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-matrix.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-matrix.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-matrix.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-matrix.dts	2018-08-18 04:45:38.000000000 -0400
@@ -68,8 +68,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		internal-regs {
 			serial@12000 {
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts	2018-08-18 04:45:38.000000000 -0400
@@ -64,8 +64,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts	2018-08-18 04:45:38.000000000 -0400
@@ -65,9 +65,9 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		devbus-bootcs {
 			status = "okay";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-synology-ds414.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-synology-ds414.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/armada-xp-synology-ds414.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/armada-xp-synology-ds414.dts	2018-08-18 04:45:38.000000000 -0400
@@ -78,8 +78,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/at91sam9g25.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/at91sam9g25.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/at91sam9g25.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/at91sam9g25.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -21,7 +21,7 @@
 				atmel,mux-mask = <
 				      /*    A         B          C     */
 				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
-				       0x0007ffff 0x8000fe3f 0x00000000  /* pioB */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
 				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/at91sam9x5.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/at91sam9x5.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/at91sam9x5.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/at91sam9x5.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -106,7 +106,7 @@
 
 			pmc: pmc@fffffc00 {
 				compatible = "atmel,at91sam9x5-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
+				reg = <0xfffffc00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
 				#address-cells = <1>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/at91-sama5d2_xplained.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/at91-sama5d2_xplained.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/at91-sama5d2_xplained.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/at91-sama5d2_xplained.dts	2018-08-18 04:45:38.000000000 -0400
@@ -122,6 +122,8 @@
 			uart1: serial@f8020000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
 				status = "okay";
 			};
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts	2018-08-18 04:45:38.000000000 -0400
@@ -162,9 +162,10 @@
 			};
 
 			adc0: adc@f8018000 {
+				atmel,adc-vref = <3300>;
+				atmel,adc-channels-used = <0xfe>;
 				pinctrl-0 = <
 					&pinctrl_adc0_adtrg
-					&pinctrl_adc0_ad0
 					&pinctrl_adc0_ad1
 					&pinctrl_adc0_ad2
 					&pinctrl_adc0_ad3
@@ -172,8 +173,6 @@
 					&pinctrl_adc0_ad5
 					&pinctrl_adc0_ad6
 					&pinctrl_adc0_ad7
-					&pinctrl_adc0_ad8
-					&pinctrl_adc0_ad9
 					>;
 				status = "okay";
 			};
@@ -303,6 +302,7 @@
 		regulator-name = "mmc0-card-supply";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	gpio_keys {
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/at91-sama5d4ek.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/at91-sama5d4ek.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/at91-sama5d4ek.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/at91-sama5d4ek.dts	2018-08-18 04:45:38.000000000 -0400
@@ -160,8 +160,15 @@
 			};
 
 			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};
 
 			mmc1: mmc@fc000000 {
@@ -193,6 +200,10 @@
 
 			pinctrl@fc06a000 {
 				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_mmc0_cd: mmc0_cd {
 						atmel,pins =
 							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/at91-sama5d4_xplained.dts	2018-08-18 04:45:38.000000000 -0400
@@ -86,10 +86,12 @@
 			macb0: ethernet@f8020000 {
 				phy-mode = "rmii";
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 
 				phy0: ethernet-phy@1 {
 					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 					reg = <1>;
 				};
 			};
@@ -108,6 +110,8 @@
 			};
 
 			usart3: serial@fc00c000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
 				status = "okay";
 			};
 
@@ -152,6 +156,10 @@
 						atmel,pins =
 							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
 				};
 			};
 		};
@@ -262,5 +270,6 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_3v3_reg>;
+		regulator-always-on;
 	};
 };
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/bcm5301x.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/bcm5301x.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/bcm5301x.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/bcm5301x.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -54,14 +54,14 @@
 		timer@0200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x0200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&clk_periph>;
 		};
 
 		local-timer@0600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x0600 0x100>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&clk_periph>;
 		};
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/da850-evm.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/da850-evm.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/da850-evm.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/da850-evm.dts	2018-08-18 04:45:38.000000000 -0400
@@ -85,6 +85,7 @@
 				#size-cells = <1>;
 				compatible = "m25p64";
 				spi-max-frequency = <30000000>;
+				m25p,fast-read;
 				reg = <0>;
 				partition@0 {
 					label = "U-Boot-SPL";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/dm814x.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/dm814x.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/dm814x.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/dm814x.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -138,7 +138,7 @@
 			};
 
 			uart1: uart@20000 {
-				compatible = "ti,omap3-uart";
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart1";
 				reg = <0x20000 0x2000>;
 				clock-frequency = <48000000>;
@@ -148,7 +148,7 @@
 			};
 
 			uart2: uart@22000 {
-				compatible = "ti,omap3-uart";
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart2";
 				reg = <0x22000 0x2000>;
 				clock-frequency = <48000000>;
@@ -158,7 +158,7 @@
 			};
 
 			uart3: uart@24000 {
-				compatible = "ti,omap3-uart";
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				ti,hwmods = "uart3";
 				reg = <0x24000 0x2000>;
 				clock-frequency = <48000000>;
@@ -189,10 +189,11 @@
 				ranges = <0 0x160000 0x16d000>;
 
 				scm_conf: scm_conf@0 {
-					compatible = "syscon";
+					compatible = "syscon", "simple-bus";
 					reg = <0x0 0x800>;
 					#address-cells = <1>;
 					#size-cells = <1>;
+					ranges = <0 0 0x800>;
 
 					scm_clocks: clocks {
 						#address-cells = <1>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/dm816x.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/dm816x.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/dm816x.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/dm816x.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -347,7 +347,7 @@
 		};
 
 		uart1: uart@48020000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			reg = <0x48020000 0x2000>;
 			clock-frequency = <48000000>;
@@ -357,7 +357,7 @@
 		};
 
 		uart2: uart@48022000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			reg = <0x48022000 0x2000>;
 			clock-frequency = <48000000>;
@@ -367,7 +367,7 @@
 		};
 
 		uart3: uart@48024000 {
-			compatible = "ti,omap3-uart";
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			reg = <0x48024000 0x2000>;
 			clock-frequency = <48000000>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/dra7.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/dra7.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/dra7.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/dra7.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -227,6 +227,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				ti,hwmods = "pcie1";
@@ -262,6 +263,7 @@
 				device_type = "pci";
 				ranges = <0x81000000 0 0          0x03000 0 0x00010000
 					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
 				ti,hwmods = "pcie2";
@@ -1497,6 +1499,16 @@
 			       0x48485200 0x2E00>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			/*
+			 * Do not allow gating of cpsw clock as workaround
+			 * for errata i877. Keeping internal clock disabled
+			 * causes the device switching characteristics
+			 * to degrade over time and eventually fail to meet
+			 * the data manual delay time/skew specs.
+			 */
+			ti,no-idle;
+
 			/*
 			 * rx_thresh_pend
 			 * rx_pend
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/dra7-evm.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/dra7-evm.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/dra7-evm.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/dra7-evm.dts	2018-08-18 04:45:38.000000000 -0400
@@ -410,6 +410,8 @@
 	tps659038: tps659038@58 {
 		compatible = "ti,tps659038";
 		reg = <0x58>;
+		ti,palmas-override-powerhold;
+		ti,system-power-controller;
 
 		tps659038_pmic {
 			compatible = "ti,tps659038-pmic";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/exynos4210-trats.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/exynos4210-trats.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/exynos4210-trats.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/exynos4210-trats.dts	2018-08-18 04:45:38.000000000 -0400
@@ -298,6 +298,8 @@
 		compatible = "maxim,max8997-pmic";
 
 		reg = <0x66>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 0>;
 
 		max8997,pmic-buck1-uses-gpio-dvs;
 		max8997,pmic-buck2-uses-gpio-dvs;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/exynos4412-trats2.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/exynos4412-trats2.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/exynos4412-trats2.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/exynos4412-trats2.dts	2018-08-18 04:45:38.000000000 -0400
@@ -359,7 +359,7 @@
 		reg = <0>;
 		vdd3-supply = <&lcd_vdd3_reg>;
 		vci-supply = <&ldo25_reg>;
-		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
 		power-on-delay= <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/imx31.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx31.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/imx31.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx31.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -30,11 +30,11 @@
 		};
 	};
 
-	avic: avic-interrupt-controller@60000000 {
+	avic: interrupt-controller@68000000 {
 		compatible = "fsl,imx31-avic", "fsl,avic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		reg = <0x60000000 0x100000>;
+		reg = <0x68000000 0x100000>;
 	};
 
 	soc {
@@ -110,13 +110,6 @@
 				interrupts = <19>;
 				clocks = <&clks 25>;
 			};
-
-			clks: ccm@53f80000{
-				compatible = "fsl,imx31-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <0 31 0x04 0 53 0x04>;
-				#clock-cells = <1>;
-			};
 		};
 
 		aips@53f00000 { /* AIPS2 */
@@ -126,6 +119,13 @@
 			reg = <0x53f00000 0x100000>;
 			ranges;
 
+			clks: ccm@53f80000{
+				compatible = "fsl,imx31-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>, <53>;
+				#clock-cells = <1>;
+			};
+
 			gpt: timer@53f90000 {
 				compatible = "fsl,imx31-gpt";
 				reg = <0x53f90000 0x4000>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/imx53-qsrb.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx53-qsrb.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/imx53-qsrb.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx53-qsrb.dts	2018-08-18 04:45:38.000000000 -0400
@@ -23,7 +23,7 @@
 	imx53-qsrb {
 		pinctrl_pmic: pmicgrp {
 			fsl,pins = <
-				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1e4 /* IRQ */
+				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1c4 /* IRQ */
 			>;
 		};
 	};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/imx6dl.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx6dl.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/imx6dl.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx6dl.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -30,7 +30,7 @@
 				/* kHz    uV */
 				996000  1250000
 				792000  1175000
-				396000  1075000
+				396000  1150000
 			>;
 			fsl,soc-operating-points = <
 				/* ARM kHz  SOC-PU uV */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/imx6qdl.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx6qdl.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/imx6qdl.dtsi	2016-01-10 20:58:14.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx6qdl.dtsi	2018-08-18 10:18:32.000000000 -0400
@@ -221,7 +221,7 @@
 					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
 						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
-						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
 						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -319,8 +319,6 @@
 		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
 		model = "imx6q-nitrogen6_max-sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
 		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
@@ -401,6 +399,8 @@
 
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
 		clocks = <&clks 201>;
 		VDDA-supply = <&reg_2p5v>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/imx6q.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx6q.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/imx6q.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx6q.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -95,7 +95,7 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
+					dmas = <&sdma 11 8 1>, <&sdma 12 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/imx6sx.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx6sx.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/imx6sx.dtsi	2016-01-10 20:58:20.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/imx6sx.dtsi	2018-08-18 10:18:40.000000000 -0400
@@ -1250,7 +1250,7 @@
 				  /* non-prefetchable memory */
 				  0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
 			num-lanes = <1>;
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
 				 <&clks IMX6SX_CLK_PCIE_AXI>,
 				 <&clks IMX6SX_CLK_LVDS1_OUT>,
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/kirkwood-ib62x0.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/kirkwood-ib62x0.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/kirkwood-ib62x0.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/kirkwood-ib62x0.dts	2018-08-18 04:45:38.000000000 -0400
@@ -113,7 +113,7 @@
 
 	partition@e0000 {
 		label = "u-boot environment";
-		reg = <0xe0000 0x100000>;
+		reg = <0xe0000 0x20000>;
 	};
 
 	partition@100000 {
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/kirkwood-openblocks_a7.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/kirkwood-openblocks_a7.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/kirkwood-openblocks_a7.dts	2018-08-18 04:45:38.000000000 -0400
@@ -53,7 +53,8 @@
 		};
 
 		pinctrl: pin-controller@10000 {
-			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header
+				     &pmx_gpio_header_gpo>;
 			pinctrl-names = "default";
 
 			pmx_uart0: pmx-uart0 {
@@ -85,11 +86,16 @@
 			 * ground.
 			 */
 			pmx_gpio_header: pmx-gpio-header {
-				marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28",
+				marvell,pins = "mpp17", "mpp29", "mpp28",
 					       "mpp35", "mpp34", "mpp40";
 				marvell,function = "gpio";
 			};
 
+			pmx_gpio_header_gpo: pxm-gpio-header-gpo {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+
 			pmx_gpio_init: pmx-init {
 				marvell,pins = "mpp38";
 				marvell,function = "gpio";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts	2018-08-18 04:45:38.000000000 -0400
@@ -88,7 +88,7 @@
 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
-	cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>;		/* gpio127 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>;		/* gpio127 */
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
 	cap-power-off-card;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/logicpd-torpedo-som.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/logicpd-torpedo-som.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/logicpd-torpedo-som.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -90,6 +90,8 @@
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -122,6 +124,7 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
 		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
 	};
 };
 
@@ -136,6 +139,12 @@
 			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr.gpio_157 */
 		>;
 	};
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/ls1021a.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/ls1021a.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/ls1021a.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/ls1021a.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -132,7 +132,7 @@
 		};
 
 		esdhc: esdhc@1560000 {
-			compatible = "fsl,esdhc";
+			compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/ls1021a-qds.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/ls1021a-qds.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/ls1021a-qds.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/ls1021a-qds.dts	2018-08-18 04:45:38.000000000 -0400
@@ -215,7 +215,7 @@
 				reg = <0x2a>;
 				VDDA-supply = <&reg_3p3v>;
 				VDDIO-supply = <&reg_3p3v>;
-				clocks = <&sys_mclk 1>;
+				clocks = <&sys_mclk>;
 			};
 		};
 	};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/ls1021a-twr.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/ls1021a-twr.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/ls1021a-twr.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/ls1021a-twr.dts	2018-08-18 04:45:38.000000000 -0400
@@ -167,7 +167,7 @@
 		reg = <0x0a>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&sys_mclk 1>;
+		clocks = <&sys_mclk>;
 	};
 };
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/moxart.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/moxart.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/moxart.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/moxart.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -6,6 +6,7 @@
  */
 
 /include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "moxa,moxart";
@@ -36,8 +37,8 @@
 		ranges;
 
 		intc: interrupt-controller@98800000 {
-			compatible = "moxa,moxart-ic";
-			reg = <0x98800000 0x38>;
+			compatible = "moxa,moxart-ic", "faraday,ftintc010";
+			reg = <0x98800000 0x100>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupt-mask = <0x00080000>;
@@ -59,7 +60,7 @@
 		timer: timer@98400000 {
 			compatible = "moxa,moxart-timer";
 			reg = <0x98400000 0x42>;
-			interrupts = <19 1>;
+			interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
 			clocks = <&clk_apb>;
 		};
 
@@ -80,7 +81,7 @@
 		dma: dma@90500000 {
 			compatible = "moxa,moxart-dma";
 			reg = <0x90500080 0x40>;
-			interrupts = <24 0>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 		};
 
@@ -93,7 +94,7 @@
 		sdhci: sdhci@98e00000 {
 			compatible = "moxa,moxart-sdhci";
 			reg = <0x98e00000 0x5C>;
-			interrupts = <5 0>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
 			dmas =  <&dma 5>,
 				<&dma 5>;
@@ -120,7 +121,7 @@
 		mac0: mac@90900000 {
 			compatible = "moxa,moxart-mac";
 			reg = <0x90900000 0x90>;
-			interrupts = <25 0>;
+			interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 			phy-handle = <&ethphy0>;
 			phy-mode = "mii";
 			status = "disabled";
@@ -129,7 +130,7 @@
 		mac1: mac@92000000 {
 			compatible = "moxa,moxart-mac";
 			reg = <0x92000000 0x90>;
-			interrupts = <27 0>;
+			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
 			phy-handle = <&ethphy1>;
 			phy-mode = "mii";
 			status = "disabled";
@@ -138,7 +139,7 @@
 		uart0: uart@98200000 {
 			compatible = "ns16550a";
 			reg = <0x98200000 0x20>;
-			interrupts = <31 8>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clock-frequency = <14745600>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/moxart-uc7112lx.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/moxart-uc7112lx.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/moxart-uc7112lx.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/moxart-uc7112lx.dts	2018-08-18 04:45:38.000000000 -0400
@@ -6,7 +6,7 @@
  */
 
 /dts-v1/;
-/include/ "moxart.dtsi"
+#include "moxart.dtsi"
 
 / {
 	model = "MOXA UC-7112-LX";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/omap3-n900.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap3-n900.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/omap3-n900.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap3-n900.dts	2018-08-18 04:45:38.000000000 -0400
@@ -697,6 +697,8 @@
 	vmmc_aux-supply = <&vsim>;
 	bus-width = <8>;
 	non-removable;
+	no-sdio;
+	no-sd;
 };
 
 &mmc3 {
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/omap3-overo-base.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap3-overo-base.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/omap3-overo-base.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap3-overo-base.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -223,7 +223,9 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x20000000>;
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 */
+		 <4 0 0x2b000000 0x1000000>,	/* CS4 */
+		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
 
 	nand@0,0 {
 		linux,mtd-name= "micron,mt29c4g96maz";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -55,8 +55,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -27,8 +27,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -15,9 +15,6 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 &gpmc {
-	ranges = <4 0 0x2b000000 0x1000000>,	/* CS4 */
-		 <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
 	smsc1: ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio6>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/omap4.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap4.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/omap4.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap4.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -844,14 +844,12 @@
 			usbhsohci: ohci@4a064800 {
 				compatible = "ti,ohci-omap3";
 				reg = <0x4a064800 0x400>;
-				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			usbhsehci: ehci@4a064c00 {
 				compatible = "ti,ehci-omap";
 				reg = <0x4a064c00 0x400>;
-				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/omap5-board-common.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap5-board-common.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/omap5-board-common.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/omap5-board-common.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -130,6 +130,16 @@
 	};
 };
 
+&gpio8 {
+	/* TI trees use GPIO instead of msecure, see also muxing */
+	p234 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio8_234/msecure";
+	};
+};
+
 &omap5_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
@@ -213,6 +223,13 @@
 		>;
 	};
 
+	/* TI trees use GPIO mode; msecure mode does not work reliably? */
+	palmas_msecure_pins: palmas_msecure_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
+		>;
+	};
+
 	usbhost_pins: pinmux_usbhost_pins {
 		pinctrl-single,pins = <
 			0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
@@ -278,6 +295,12 @@
 			&usbhost_wkup_pins
 	>;
 
+	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
+		>;
+	};
+
 	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
 		pinctrl-single,pins = <
 			0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
@@ -345,6 +368,8 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
 
 		extcon_usb3: palmas_usb {
 			compatible = "ti,palmas-usb-vid";
@@ -358,6 +383,14 @@
 			#clock-cells = <0>;
 		};
 
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+			ti,backup-battery-chargeable;
+			ti,backup-battery-charge-high-current;
+		};
+
 		palmas_pmic {
 			compatible = "ti,palmas-pmic";
 			interrupt-parent = <&palmas>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/pxa27x.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/pxa27x.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/pxa27x.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/pxa27x.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -13,6 +13,7 @@
 			interrupts = <25>;
 			#dma-channels = <32>;
 			#dma-cells = <2>;
+			#dma-requests = <75>;
 			status = "okay";
 		};
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/pxa3xx.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/pxa3xx.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/pxa3xx.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/pxa3xx.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -12,6 +12,7 @@
 			interrupts = <25>;
 			#dma-channels = <32>;
 			#dma-cells = <2>;
+			#dma-requests = <100>;
 			status = "okay";
 		};
 
@@ -30,7 +31,7 @@
 			reg = <0x43100000 90>;
 			interrupts = <45>;
 			clocks = <&clks CLK_NAND>;
-			dmas = <&pdma 97>;
+			dmas = <&pdma 97 3>;
 			dma-names = "data";
 			#address-cells = <1>;
 			#size-cells = <1>;	
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/qcom-apq8064.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -5,6 +5,7 @@
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 / {
 	model = "Qualcomm APQ8064";
@@ -354,22 +355,50 @@
 
 					compatible = "qcom,pm8921-gpio";
 					reg = <0x150>;
-					interrupts = <192 1>, <193 1>, <194 1>,
-						     <195 1>, <196 1>, <197 1>,
-						     <198 1>, <199 1>, <200 1>,
-						     <201 1>, <202 1>, <203 1>,
-						     <204 1>, <205 1>, <206 1>,
-						     <207 1>, <208 1>, <209 1>,
-						     <210 1>, <211 1>, <212 1>,
-						     <213 1>, <214 1>, <215 1>,
-						     <216 1>, <217 1>, <218 1>,
-						     <219 1>, <220 1>, <221 1>,
-						     <222 1>, <223 1>, <224 1>,
-						     <225 1>, <226 1>, <227 1>,
-						     <228 1>, <229 1>, <230 1>,
-						     <231 1>, <232 1>, <233 1>,
-						     <234 1>, <235 1>;
-
+					interrupts = <192 IRQ_TYPE_NONE>,
+						     <193 IRQ_TYPE_NONE>,
+						     <194 IRQ_TYPE_NONE>,
+						     <195 IRQ_TYPE_NONE>,
+						     <196 IRQ_TYPE_NONE>,
+						     <197 IRQ_TYPE_NONE>,
+						     <198 IRQ_TYPE_NONE>,
+						     <199 IRQ_TYPE_NONE>,
+						     <200 IRQ_TYPE_NONE>,
+						     <201 IRQ_TYPE_NONE>,
+						     <202 IRQ_TYPE_NONE>,
+						     <203 IRQ_TYPE_NONE>,
+						     <204 IRQ_TYPE_NONE>,
+						     <205 IRQ_TYPE_NONE>,
+						     <206 IRQ_TYPE_NONE>,
+						     <207 IRQ_TYPE_NONE>,
+						     <208 IRQ_TYPE_NONE>,
+						     <209 IRQ_TYPE_NONE>,
+						     <210 IRQ_TYPE_NONE>,
+						     <211 IRQ_TYPE_NONE>,
+						     <212 IRQ_TYPE_NONE>,
+						     <213 IRQ_TYPE_NONE>,
+						     <214 IRQ_TYPE_NONE>,
+						     <215 IRQ_TYPE_NONE>,
+						     <216 IRQ_TYPE_NONE>,
+						     <217 IRQ_TYPE_NONE>,
+						     <218 IRQ_TYPE_NONE>,
+						     <219 IRQ_TYPE_NONE>,
+						     <220 IRQ_TYPE_NONE>,
+						     <221 IRQ_TYPE_NONE>,
+						     <222 IRQ_TYPE_NONE>,
+						     <223 IRQ_TYPE_NONE>,
+						     <224 IRQ_TYPE_NONE>,
+						     <225 IRQ_TYPE_NONE>,
+						     <226 IRQ_TYPE_NONE>,
+						     <227 IRQ_TYPE_NONE>,
+						     <228 IRQ_TYPE_NONE>,
+						     <229 IRQ_TYPE_NONE>,
+						     <230 IRQ_TYPE_NONE>,
+						     <231 IRQ_TYPE_NONE>,
+						     <232 IRQ_TYPE_NONE>,
+						     <233 IRQ_TYPE_NONE>,
+						     <234 IRQ_TYPE_NONE>,
+						     <235 IRQ_TYPE_NONE>;
 					gpio-controller;
 					#gpio-cells = <2>;
 
@@ -381,9 +410,18 @@
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupts =
-					<128 1>, <129 1>, <130 1>, <131 1>,
-					<132 1>, <133 1>, <134 1>, <135 1>,
-					<136 1>, <137 1>, <138 1>, <139 1>;
+					<128 IRQ_TYPE_NONE>,
+					<129 IRQ_TYPE_NONE>,
+					<130 IRQ_TYPE_NONE>,
+					<131 IRQ_TYPE_NONE>,
+					<132 IRQ_TYPE_NONE>,
+					<133 IRQ_TYPE_NONE>,
+					<134 IRQ_TYPE_NONE>,
+					<135 IRQ_TYPE_NONE>,
+					<136 IRQ_TYPE_NONE>,
+					<137 IRQ_TYPE_NONE>,
+					<138 IRQ_TYPE_NONE>,
+					<139 IRQ_TYPE_NONE>;
 				};
 
 				rtc@11d {
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/r8a7790.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/r8a7790.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/r8a7790.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/r8a7790.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -1360,8 +1360,11 @@
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
 			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
 				<&p_clk>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
@@ -1409,7 +1412,8 @@
 	};
 
 	msiof0: spi@e6e20000 {
-		compatible = "renesas,msiof-r8a7790";
+		compatible = "renesas,msiof-r8a7790",
+			     "renesas,rcar-gen2-msiof";
 		reg = <0 0xe6e20000 0 0x0064>;
 		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
@@ -1422,7 +1426,8 @@
 	};
 
 	msiof1: spi@e6e10000 {
-		compatible = "renesas,msiof-r8a7790";
+		compatible = "renesas,msiof-r8a7790",
+			     "renesas,rcar-gen2-msiof";
 		reg = <0 0xe6e10000 0 0x0064>;
 		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
@@ -1435,7 +1440,8 @@
 	};
 
 	msiof2: spi@e6e00000 {
-		compatible = "renesas,msiof-r8a7790";
+		compatible = "renesas,msiof-r8a7790",
+			     "renesas,rcar-gen2-msiof";
 		reg = <0 0xe6e00000 0 0x0064>;
 		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
@@ -1448,7 +1454,8 @@
 	};
 
 	msiof3: spi@e6c90000 {
-		compatible = "renesas,msiof-r8a7790";
+		compatible = "renesas,msiof-r8a7790",
+			     "renesas,rcar-gen2-msiof";
 		reg = <0 0xe6c90000 0 0x0064>;
 		interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/r8a7791.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/r8a7791.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/r8a7791.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/r8a7791.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -1374,8 +1374,11 @@
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
 			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
 				<&p_clk>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts	2018-08-18 04:45:38.000000000 -0400
@@ -280,7 +280,7 @@
 	x2_clk: x2-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <148500000>;
+		clock-frequency = <74250000>;
 	};
 
 	x13_clk: x13-clock {
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/r8a7794.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/r8a7794.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/r8a7794.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/r8a7794.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -1023,7 +1023,7 @@
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
-			clocks = <&mp_clk>, <&mp_clk>,
+			clocks = <&mp_clk>, <&hp_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
 			#clock-cells = <1>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/s5pv210.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/s5pv210.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/s5pv210.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/s5pv210.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -461,6 +461,7 @@
 			compatible = "samsung,exynos4210-ohci";
 			reg = <0xec300000 0x100>;
 			interrupts = <23>;
+			interrupt-parent = <&vic1>;
 			clocks = <&clocks CLK_USB_HOST>;
 			clock-names = "usbhost";
 			#address-cells = <1>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/sama5d2.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/sama5d2.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/sama5d2.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/sama5d2.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -856,6 +856,13 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x100>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>;
+				dma-names = "tx", "rx";
 				clocks = <&uart0_clk>;
 				clock-names = "usart";
 				status = "disabled";
@@ -865,6 +872,13 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x100>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>;
+				dma-names = "tx", "rx";
 				clocks = <&uart1_clk>;
 				clock-names = "usart";
 				status = "disabled";
@@ -874,6 +888,13 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x100>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
 				clocks = <&uart2_clk>;
 				clock-names = "usart";
 				status = "disabled";
@@ -985,6 +1006,13 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc008000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(41))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(42))>;
+				dma-names = "tx", "rx";
 				clocks = <&uart3_clk>;
 				clock-names = "usart";
 				status = "disabled";
@@ -993,6 +1021,13 @@
 			uart4: serial@fc00c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc00c000 0x100>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(43))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx", "rx";
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&uart4_clk>;
 				clock-names = "usart";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/sama5d2-pinfunc.h linux-libre-4.4.150-gnu/arch/arm/boot/dts/sama5d2-pinfunc.h
--- linux-libre-4.4-gnu/arch/arm/boot/dts/sama5d2-pinfunc.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/sama5d2-pinfunc.h	2018-08-18 04:45:38.000000000 -0400
@@ -90,7 +90,7 @@
 #define PIN_PA14__I2SC1_MCK		PINMUX_PIN(PIN_PA14, 4, 2)
 #define PIN_PA14__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA14, 5, 1)
 #define PIN_PA14__D9			PINMUX_PIN(PIN_PA14, 6, 2)
-#define PIN_PA15			14
+#define PIN_PA15			15
 #define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
 #define PIN_PA15__SPI0_MOSI		PINMUX_PIN(PIN_PA15, 1, 1)
 #define PIN_PA15__TF1			PINMUX_PIN(PIN_PA15, 2, 1)
@@ -837,8 +837,8 @@
 #define PIN_PD23__ISC_FIELD		PINMUX_PIN(PIN_PD23, 6, 4)
 #define PIN_PD24			120
 #define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
-#define PIN_PD24__UTXD2			PINMUX_PIN(PIN_PD23, 1, 2)
-#define PIN_PD24__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD24__UTXD2			PINMUX_PIN(PIN_PD24, 1, 2)
+#define PIN_PD24__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD24, 3, 3)
 #define PIN_PD25			121
 #define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
 #define PIN_PD25__SPI1_SPCK		PINMUX_PIN(PIN_PD25, 1, 3)
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/sama5d4.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/sama5d4.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/sama5d4.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/sama5d4.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -1342,7 +1342,7 @@
 			dbgu: serial@fc069000 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
-				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				clocks = <&dbgu_clk>;
@@ -1354,7 +1354,7 @@
 			pinctrl@fc06a000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
 				ranges = <0xfc068000 0xfc068000 0x100
 					  0xfc06a000 0xfc06a000 0x4000>;
 				/* WARNING: revisit as pin spec has changed */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/socfpga.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/socfpga.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/socfpga.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/socfpga.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -738,7 +738,7 @@
 		timer@fffec600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xfffec600 0x100>;
-			interrupts = <1 13 0xf04>;
+			interrupts = <1 13 0xf01>;
 			clocks = <&mpu_periph_clk>;
 		};
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/spear1310-evb.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/spear1310-evb.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/spear1310-evb.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/spear1310-evb.dts	2018-08-18 04:45:38.000000000 -0400
@@ -349,7 +349,7 @@
 			spi0: spi@e0100000 {
 				status = "okay";
 				num-cs = <3>;
-				cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>;
+				cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>;
 
 				stmpe610@0 {
 					compatible = "st,stmpe610";
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/spear1340.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/spear1340.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/spear1340.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/spear1340.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -141,8 +141,8 @@
 				reg = <0xb4100000 0x1000>;
 				interrupts = <0 105 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */
-					<&dwdma0 0x680 0 1 0>; /* 0xD << 7 */
+				dmas = <&dwdma0 12 0 1>,
+					<&dwdma0 13 1 0>;
 				dma-names = "tx", "rx";
 			};
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/spear13xx.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/spear13xx.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/spear13xx.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/spear13xx.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -100,7 +100,7 @@
 			reg = <0xb2800000 0x1000>;
 			interrupts = <0 29 0x4>;
 			status = "disabled";
-			dmas = <&dwdma0 0 0 0 0>;
+			dmas = <&dwdma0 0 0 0>;
 			dma-names = "data";
 		};
 
@@ -288,8 +288,8 @@
 				#size-cells = <0>;
 				interrupts = <0 31 0x4>;
 				status = "disabled";
-				dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */
-					<&dwdma0 0x0280 0 0 0>;  /* 0x5 << 7 */
+				dmas = <&dwdma0 4 0 0>,
+					<&dwdma0 5 0 0>;
 				dma-names = "tx", "rx";
 			};
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/spear600.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/spear600.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/spear600.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/spear600.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -194,6 +194,7 @@
 			rtc@fc900000 {
 				compatible = "st,spear600-rtc";
 				reg = <0xfc900000 0x1000>;
+				interrupt-parent = <&vic0>;
 				interrupts = <10>;
 				status = "disabled";
 			};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -127,22 +127,14 @@
 			};
 			mmcsd_default_mode: mmcsd_default {
 				mmcsd_default_cfg1 {
-					/* MCCLK */
-					pins = "GPIO8_B10";
-					ste,output = <0>;
-				};
-				mmcsd_default_cfg2 {
-					/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */
-					pins = "GPIO10_C11", "GPIO15_A12",
-					"GPIO16_C13", "GPIO23_D15";
-					ste,output = <1>;
-				};
-				mmcsd_default_cfg3 {
-					/* MCCMD, MCDAT3-0, MCMSFBCLK */
-					pins = "GPIO9_A10", "GPIO11_B11",
-					"GPIO12_A11", "GPIO13_C12",
-					"GPIO14_B12", "GPIO24_C15";
-					ste,input = <1>;
+					/*
+					 * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2
+					 * MCCMD, MCDAT3-0, MCMSFBCLK
+					 */
+					pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11",
+					       "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12",
+					       "GPIO16_C13", "GPIO23_D15", "GPIO24_C15";
+					ste,output = <2>;
 				};
 			};
 		};
@@ -802,10 +794,21 @@
 			clock-names = "mclk", "apb_pclk";
 			interrupt-parent = <&vica>;
 			interrupts = <22>;
-			max-frequency = <48000000>;
+			max-frequency = <400000>;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			full-pwr-cycle;
+			/*
+			 * The STw4811 circuit used with the Nomadik strictly
+			 * requires that all of these signal direction pins be
+			 * routed and used for its 4-bit levelshifter.
+			 */
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-dir-cmd;
+			st,sig-pin-fbclk;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
 			vmmc-supply = <&vmmc_regulator>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/stih407.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/stih407.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/stih407.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/stih407.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -8,6 +8,7 @@
  */
 #include "stih407-clock.dtsi"
 #include "stih407-family.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 / {
 	soc {
 		sti-display-subsystem {
@@ -112,7 +113,7 @@
 					 <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>;
 
-				hdmi,hpd-gpio = <&pio5 3>;
+				hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
 				reset-names = "hdmi";
 				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
 				ddc = <&hdmiddc>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/stih407-family.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/stih407-family.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/stih407-family.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/stih407-family.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -497,8 +497,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_mmc0>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			bus-width = <8>;
 			non-removable;
 		};
@@ -512,8 +513,9 @@
 			interrupt-names = "mmcirq";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sd1>;
-			clock-names = "mmc";
-			clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+			clock-names = "mmc", "icn";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 			resets = <&softreset STIH407_MMC1_SOFTRESET>;
 			bus-width = <4>;
 		};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/stih410.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/stih410.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/stih410.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/stih410.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -9,6 +9,7 @@
 #include "stih410-clock.dtsi"
 #include "stih407-family.dtsi"
 #include "stih410-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 / {
 	aliases {
 		bdisp0 = &bdisp0;
@@ -41,7 +42,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -57,7 +59,8 @@
 			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -71,7 +74,8 @@
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a83c00 0x100>;
 			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -87,7 +91,8 @@
 			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
-			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
+				 <&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
 			reset-names = "power", "softreset";
@@ -199,7 +204,7 @@
 					 <&clk_s_d2_quadfs 0>,
 					 <&clk_s_d2_quadfs 1>;
 
-				hdmi,hpd-gpio = <&pio5 3>;
+				hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
 				reset-names = "hdmi";
 				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
 				ddc = <&hdmiddc>;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/sun4i-a10-a1000.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/sun4i-a10-a1000.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/sun4i-a10-a1000.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/sun4i-a10-a1000.dts	2018-08-18 04:45:38.000000000 -0400
@@ -84,6 +84,7 @@
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
 		enable-active-high;
 		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
 	};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/sun4i-a10-hackberry.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/sun4i-a10-hackberry.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/sun4i-a10-hackberry.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/sun4i-a10-hackberry.dts	2018-08-18 04:45:38.000000000 -0400
@@ -66,6 +66,7 @@
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
 		enable-active-high;
 		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
 	};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts	2018-08-18 04:45:38.000000000 -0400
@@ -80,6 +80,7 @@
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
 		enable-active-high;
 		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
 	};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts	2018-08-18 04:45:38.000000000 -0400
@@ -79,6 +79,7 @@
 		regulator-name = "emac-3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <20000>;
 		enable-active-high;
 		gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
 	};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/sun5i-a13.dtsi linux-libre-4.4.150-gnu/arch/arm/boot/dts/sun5i-a13.dtsi
--- linux-libre-4.4-gnu/arch/arm/boot/dts/sun5i-a13.dtsi	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/sun5i-a13.dtsi	2018-08-18 04:45:38.000000000 -0400
@@ -83,7 +83,7 @@
 			trips {
 				cpu_alert0: cpu_alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/sun5i-r8-chip.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/sun5i-r8-chip.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/sun5i-r8-chip.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/sun5i-r8-chip.dts	2018-08-18 04:45:38.000000000 -0400
@@ -52,7 +52,7 @@
 
 / {
 	model = "NextThing C.H.I.P.";
-	compatible = "nextthing,chip", "allwinner,sun5i-r8";
+	compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13";
 
 	aliases {
 		i2c0 = &i2c0;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/boot/dts/tegra20-paz00.dts linux-libre-4.4.150-gnu/arch/arm/boot/dts/tegra20-paz00.dts
--- linux-libre-4.4-gnu/arch/arm/boot/dts/tegra20-paz00.dts	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/boot/dts/tegra20-paz00.dts	2018-08-18 04:45:38.000000000 -0400
@@ -565,6 +565,7 @@
 			regulator-name = "+3VS,vdd_pnl";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
 			gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/common/icst.c linux-libre-4.4.150-gnu/arch/arm/common/icst.c
--- linux-libre-4.4-gnu/arch/arm/common/icst.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/common/icst.c	2018-08-18 04:45:38.000000000 -0400
@@ -16,7 +16,7 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-
+#include <asm/div64.h>
 #include <asm/hardware/icst.h>
 
 /*
@@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div);
 
 unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
 {
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+	u64 dividend = p->ref * 2 * (u64)(vco.v + 8);
+	u32 divisor = (vco.r + 2) * p->s2div[vco.s];
+
+	do_div(dividend, divisor);
+	return (unsigned long)dividend;
 }
 
 EXPORT_SYMBOL(icst_hz);
@@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params
 
 		if (f > p->vco_min && f <= p->vco_max)
 			break;
+		i++;
 	} while (i < 8);
 
 	if (i >= 8)
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/common/sa1111.c linux-libre-4.4.150-gnu/arch/arm/common/sa1111.c
--- linux-libre-4.4-gnu/arch/arm/common/sa1111.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/common/sa1111.c	2018-08-18 04:45:38.000000000 -0400
@@ -869,9 +869,9 @@ struct sa1111_save_data {
 
 #ifdef CONFIG_PM
 
-static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
+static int sa1111_suspend_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags;
 	unsigned int val;
@@ -934,9 +934,9 @@ static int sa1111_suspend(struct platfor
  *	restored by their respective drivers, and must be called
  *	via LDM after this function.
  */
-static int sa1111_resume(struct platform_device *dev)
+static int sa1111_resume_noirq(struct device *dev)
 {
-	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111 *sachip = dev_get_drvdata(dev);
 	struct sa1111_save_data *save;
 	unsigned long flags, id;
 	void __iomem *base;
@@ -952,7 +952,7 @@ static int sa1111_resume(struct platform
 	id = sa1111_readl(sachip->base + SA1111_SKID);
 	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
 		__sa1111_remove(sachip);
-		platform_set_drvdata(dev, NULL);
+		dev_set_drvdata(dev, NULL);
 		kfree(save);
 		return 0;
 	}
@@ -1003,8 +1003,8 @@ static int sa1111_resume(struct platform
 }
 
 #else
-#define sa1111_suspend NULL
-#define sa1111_resume  NULL
+#define sa1111_suspend_noirq NULL
+#define sa1111_resume_noirq  NULL
 #endif
 
 static int sa1111_probe(struct platform_device *pdev)
@@ -1038,6 +1038,11 @@ static int sa1111_remove(struct platform
 	return 0;
 }
 
+static struct dev_pm_ops sa1111_pm_ops = {
+	.suspend_noirq = sa1111_suspend_noirq,
+	.resume_noirq = sa1111_resume_noirq,
+};
+
 /*
  *	Not sure if this should be on the system bus or not yet.
  *	We really want some way to register a system device at
@@ -1050,10 +1055,9 @@ static int sa1111_remove(struct platform
 static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
 	.remove		= sa1111_remove,
-	.suspend	= sa1111_suspend,
-	.resume		= sa1111_resume,
 	.driver		= {
 		.name	= "sa1111",
+		.pm	= &sa1111_pm_ops,
 	},
 };
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/configs/omap2plus_defconfig linux-libre-4.4.150-gnu/arch/arm/configs/omap2plus_defconfig
--- linux-libre-4.4-gnu/arch/arm/configs/omap2plus_defconfig	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/configs/omap2plus_defconfig	2018-08-18 04:45:38.000000000 -0400
@@ -221,6 +221,7 @@ CONFIG_SERIO=m
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/configs/s3c2410_defconfig linux-libre-4.4.150-gnu/arch/arm/configs/s3c2410_defconfig
--- linux-libre-4.4-gnu/arch/arm/configs/s3c2410_defconfig	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/configs/s3c2410_defconfig	2018-08-18 04:45:38.000000000 -0400
@@ -87,9 +87,9 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/crypto/aesbs-glue.c linux-libre-4.4.150-gnu/arch/arm/crypto/aesbs-glue.c
--- linux-libre-4.4-gnu/arch/arm/crypto/aesbs-glue.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/crypto/aesbs-glue.c	2018-08-18 04:45:38.000000000 -0400
@@ -357,7 +357,7 @@ static struct crypto_alg aesbs_algs[] =
 }, {
 	.cra_name		= "cbc(aes)",
 	.cra_driver_name	= "cbc-aes-neonbs",
-	.cra_priority		= 300,
+	.cra_priority		= 250,
 	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
 	.cra_blocksize		= AES_BLOCK_SIZE,
 	.cra_ctxsize		= sizeof(struct async_helper_ctx),
@@ -377,7 +377,7 @@ static struct crypto_alg aesbs_algs[] =
 }, {
 	.cra_name		= "ctr(aes)",
 	.cra_driver_name	= "ctr-aes-neonbs",
-	.cra_priority		= 300,
+	.cra_priority		= 250,
 	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
 	.cra_blocksize		= 1,
 	.cra_ctxsize		= sizeof(struct async_helper_ctx),
@@ -397,7 +397,7 @@ static struct crypto_alg aesbs_algs[] =
 }, {
 	.cra_name		= "xts(aes)",
 	.cra_driver_name	= "xts-aes-neonbs",
-	.cra_priority		= 300,
+	.cra_priority		= 250,
 	.cra_flags		= CRYPTO_ALG_TYPE_ABLKCIPHER|CRYPTO_ALG_ASYNC,
 	.cra_blocksize		= AES_BLOCK_SIZE,
 	.cra_ctxsize		= sizeof(struct async_helper_ctx),
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/crypto/aes-ce-glue.c linux-libre-4.4.150-gnu/arch/arm/crypto/aes-ce-glue.c
--- linux-libre-4.4-gnu/arch/arm/crypto/aes-ce-glue.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/crypto/aes-ce-glue.c	2018-08-18 04:45:38.000000000 -0400
@@ -87,8 +87,13 @@ static int ce_aes_expandkey(struct crypt
 		u32 *rki = ctx->key_enc + (i * kwords);
 		u32 *rko = rki + kwords;
 
+#ifndef CONFIG_CPU_BIG_ENDIAN
 		rko[0] = ror32(ce_aes_sub(rki[kwords - 1]), 8);
 		rko[0] = rko[0] ^ rki[0] ^ rcon[i];
+#else
+		rko[0] = rol32(ce_aes_sub(rki[kwords - 1]), 8);
+		rko[0] = rko[0] ^ rki[0] ^ (rcon[i] << 24);
+#endif
 		rko[1] = rko[0] ^ rki[1];
 		rko[2] = rko[1] ^ rki[2];
 		rko[3] = rko[2] ^ rki[3];
@@ -279,7 +284,7 @@ static int ctr_encrypt(struct blkcipher_
 		err = blkcipher_walk_done(desc, &walk,
 					  walk.nbytes % AES_BLOCK_SIZE);
 	}
-	if (nbytes) {
+	if (walk.nbytes % AES_BLOCK_SIZE) {
 		u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
 		u8 __aligned(8) tail[AES_BLOCK_SIZE];
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/crypto/ghash-ce-glue.c linux-libre-4.4.150-gnu/arch/arm/crypto/ghash-ce-glue.c
--- linux-libre-4.4-gnu/arch/arm/crypto/ghash-ce-glue.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/crypto/ghash-ce-glue.c	2018-08-18 04:45:38.000000000 -0400
@@ -226,6 +226,27 @@ static int ghash_async_digest(struct aha
 	}
 }
 
+static int ghash_async_import(struct ahash_request *req, const void *in)
+{
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+
+	desc->tfm = cryptd_ahash_child(ctx->cryptd_tfm);
+	desc->flags = req->base.flags;
+
+	return crypto_shash_import(desc, in);
+}
+
+static int ghash_async_export(struct ahash_request *req, void *out)
+{
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+
+	return crypto_shash_export(desc, out);
+}
+
 static int ghash_async_setkey(struct crypto_ahash *tfm, const u8 *key,
 			      unsigned int keylen)
 {
@@ -274,7 +295,10 @@ static struct ahash_alg ghash_async_alg
 	.final			= ghash_async_final,
 	.setkey			= ghash_async_setkey,
 	.digest			= ghash_async_digest,
+	.import			= ghash_async_import,
+	.export			= ghash_async_export,
 	.halg.digestsize	= GHASH_DIGEST_SIZE,
+	.halg.statesize		= sizeof(struct ghash_desc_ctx),
 	.halg.base		= {
 		.cra_name	= "ghash",
 		.cra_driver_name = "ghash-ce",
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/assembler.h linux-libre-4.4.150-gnu/arch/arm/include/asm/assembler.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/assembler.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/assembler.h	2018-08-18 04:45:38.000000000 -0400
@@ -512,4 +512,32 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 #endif
 	.endm
 
+	.macro	bug, msg, line
+#ifdef CONFIG_THUMB2_KERNEL
+1:	.inst	0xde02
+#else
+1:	.inst	0xe7f001f2
+#endif
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+	.pushsection .rodata.str, "aMS", %progbits, 1
+2:	.asciz	"\msg"
+	.popsection
+	.pushsection __bug_table, "aw"
+	.align	2
+	.word	1b, 2b
+	.hword	\line
+	.popsection
+#endif
+	.endm
+
+#ifdef CONFIG_KPROBES
+#define _ASM_NOKPROBE(entry)				\
+	.pushsection "_kprobe_blacklist", "aw" ;	\
+	.balign 4 ;					\
+	.long entry;					\
+	.popsection
+#else
+#define _ASM_NOKPROBE(entry)
+#endif
+
 #endif /* __ASM_ASSEMBLER_H__ */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/cputype.h linux-libre-4.4.150-gnu/arch/arm/include/asm/cputype.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/cputype.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/cputype.h	2018-08-18 04:45:38.000000000 -0400
@@ -81,6 +81,9 @@
 #define ARM_CPU_XSCALE_ARCH_V2		0x4000
 #define ARM_CPU_XSCALE_ARCH_V3		0x6000
 
+/* Qualcomm implemented cores */
+#define ARM_CPU_PART_SCORPION		0x510002d0
+
 extern unsigned int processor_id;
 
 #ifdef CONFIG_CPU_CP15
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/dma-mapping.h linux-libre-4.4.150-gnu/arch/arm/include/asm/dma-mapping.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/dma-mapping.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/dma-mapping.h	2018-08-18 04:45:38.000000000 -0400
@@ -119,7 +119,7 @@ static inline dma_addr_t virt_to_dma(str
 /* The ARM override for dma_max_pfn() */
 static inline unsigned long dma_max_pfn(struct device *dev)
 {
-	return PHYS_PFN_OFFSET + dma_to_pfn(dev, *dev->dma_mask);
+	return dma_to_pfn(dev, *dev->dma_mask);
 }
 #define dma_max_pfn(dev) dma_max_pfn(dev)
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/elf.h linux-libre-4.4.150-gnu/arch/arm/include/asm/elf.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/elf.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/elf.h	2018-08-18 04:45:38.000000000 -0400
@@ -112,12 +112,8 @@ int dump_task_regs(struct task_struct *t
 #define CORE_DUMP_USE_REGSET
 #define ELF_EXEC_PAGESIZE	4096
 
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE	(TASK_SIZE / 3 * 2)
+/* This is the base location for PIE (ET_DYN with INTERP) loads. */
+#define ELF_ET_DYN_BASE		0x400000UL
 
 /* When the program starts, a1 contains a pointer to a function to be 
    registered with atexit, as per the SVR4 ABI.  A value of 0 means we 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/floppy.h linux-libre-4.4.150-gnu/arch/arm/include/asm/floppy.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/floppy.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/floppy.h	2018-08-18 04:45:38.000000000 -0400
@@ -17,7 +17,7 @@
 
 #define fd_outb(val,port)			\
 	do {					\
-		if ((port) == FD_DOR)		\
+		if ((port) == (u32)FD_DOR)	\
 			fd_setdor((val));	\
 		else				\
 			outb((val),(port));	\
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/ftrace.h linux-libre-4.4.150-gnu/arch/arm/include/asm/ftrace.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/ftrace.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/ftrace.h	2018-08-18 04:45:38.000000000 -0400
@@ -54,6 +54,24 @@ static inline void *return_address(unsig
 
 #define ftrace_return_address(n) return_address(n)
 
+#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
+
+static inline bool arch_syscall_match_sym_name(const char *sym,
+					       const char *name)
+{
+	if (!strcmp(sym, "sys_mmap2"))
+		sym = "sys_mmap_pgoff";
+	else if (!strcmp(sym, "sys_statfs64_wrapper"))
+		sym = "sys_statfs64";
+	else if (!strcmp(sym, "sys_fstatfs64_wrapper"))
+		sym = "sys_fstatfs64";
+	else if (!strcmp(sym, "sys_arm_fadvise64_64"))
+		sym = "sys_fadvise64_64";
+
+	/* Ignore case since sym may start with "SyS" instead of "sys" */
+	return !strcasecmp(sym, name);
+}
+
 #endif /* ifndef __ASSEMBLY__ */
 
 #endif /* _ASM_ARM_FTRACE */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/futex.h linux-libre-4.4.150-gnu/arch/arm/include/asm/futex.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/futex.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/futex.h	2018-08-18 04:45:38.000000000 -0400
@@ -128,20 +128,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval,
 #endif /* !SMP */
 
 static inline int
-futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
+arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
 {
-	int op = (encoded_op >> 28) & 7;
-	int cmp = (encoded_op >> 24) & 15;
-	int oparg = (encoded_op << 8) >> 20;
-	int cmparg = (encoded_op << 20) >> 20;
 	int oldval = 0, ret, tmp;
 
-	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
-		oparg = 1 << oparg;
-
-	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
-		return -EFAULT;
-
 #ifndef CONFIG_SMP
 	preempt_disable();
 #endif
@@ -172,17 +162,9 @@ futex_atomic_op_inuser (int encoded_op,
 	preempt_enable();
 #endif
 
-	if (!ret) {
-		switch (cmp) {
-		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
-		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
-		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
-		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
-		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
-		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
-		default: ret = -ENOSYS;
-		}
-	}
+	if (!ret)
+		*oval = oldval;
+
 	return ret;
 }
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/Kbuild linux-libre-4.4.150-gnu/arch/arm/include/asm/Kbuild
--- linux-libre-4.4-gnu/arch/arm/include/asm/Kbuild	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/Kbuild	2018-08-18 04:45:38.000000000 -0400
@@ -36,4 +36,3 @@ generic-y += termbits.h
 generic-y += termios.h
 generic-y += timex.h
 generic-y += trace_clock.h
-generic-y += unaligned.h
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/kgdb.h linux-libre-4.4.150-gnu/arch/arm/include/asm/kgdb.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/kgdb.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/kgdb.h	2018-08-18 04:45:38.000000000 -0400
@@ -76,7 +76,7 @@ extern int kgdb_fault_expected;
 
 #define KGDB_MAX_NO_CPUS	1
 #define BUFMAX			400
-#define NUMREGBYTES		(DBG_MAX_REG_NUM << 2)
+#define NUMREGBYTES		(GDB_MAX_REGS << 2)
 #define NUMCRITREGBYTES		(32 << 2)
 
 #define _R0			0
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/kvm_arm.h linux-libre-4.4.150-gnu/arch/arm/include/asm/kvm_arm.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/kvm_arm.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/kvm_arm.h	2018-08-18 04:45:38.000000000 -0400
@@ -161,8 +161,7 @@
 #else
 #define VTTBR_X		(5 - KVM_T0SZ)
 #endif
-#define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
-#define VTTBR_BADDR_MASK  (((1LLU << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
+#define VTTBR_BADDR_MASK  (((1LLU << (40 - VTTBR_X)) - 1) << VTTBR_X)
 #define VTTBR_VMID_SHIFT  (48LLU)
 #define VTTBR_VMID_MASK	  (0xffLLU << VTTBR_VMID_SHIFT)
 
@@ -209,6 +208,7 @@
 #define HSR_EC_IABT_HYP	(0x21)
 #define HSR_EC_DABT	(0x24)
 #define HSR_EC_DABT_HYP	(0x25)
+#define HSR_EC_MAX	(0x3f)
 
 #define HSR_WFI_IS_WFE		(1U << 0)
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/kvm_mmu.h linux-libre-4.4.150-gnu/arch/arm/include/asm/kvm_mmu.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/kvm_mmu.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/kvm_mmu.h	2018-08-18 04:45:38.000000000 -0400
@@ -204,18 +204,12 @@ static inline void __coherent_cache_gues
 	 * and iterate over the range.
 	 */
 
-	bool need_flush = !vcpu_has_cache_enabled(vcpu) || ipa_uncached;
-
 	VM_BUG_ON(size & ~PAGE_MASK);
 
-	if (!need_flush && !icache_is_pipt())
-		goto vipt_cache;
-
 	while (size) {
 		void *va = kmap_atomic_pfn(pfn);
 
-		if (need_flush)
-			kvm_flush_dcache_to_poc(va, PAGE_SIZE);
+		kvm_flush_dcache_to_poc(va, PAGE_SIZE);
 
 		if (icache_is_pipt())
 			__cpuc_coherent_user_range((unsigned long)va,
@@ -227,7 +221,6 @@ static inline void __coherent_cache_gues
 		kunmap_atomic(va);
 	}
 
-vipt_cache:
 	if (!icache_is_pipt() && !icache_is_vivt_asid_tagged()) {
 		/* any kind of VIPT cache */
 		__flush_icache_all();
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/mmu_context.h linux-libre-4.4.150-gnu/arch/arm/include/asm/mmu_context.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/mmu_context.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/mmu_context.h	2018-08-18 04:45:38.000000000 -0400
@@ -61,6 +61,7 @@ static inline void check_and_switch_cont
 		cpu_switch_mm(mm->pgd, mm);
 }
 
+#ifndef MODULE
 #define finish_arch_post_lock_switch \
 	finish_arch_post_lock_switch
 static inline void finish_arch_post_lock_switch(void)
@@ -82,6 +83,7 @@ static inline void finish_arch_post_lock
 		preempt_enable_no_resched();
 	}
 }
+#endif /* !MODULE */
 
 #endif	/* CONFIG_MMU */
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/pgtable-2level.h linux-libre-4.4.150-gnu/arch/arm/include/asm/pgtable-2level.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/pgtable-2level.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/pgtable-2level.h	2018-08-18 04:45:38.000000000 -0400
@@ -193,6 +193,7 @@ static inline pmd_t *pmd_offset(pud_t *p
 
 #define pmd_large(pmd)		(pmd_val(pmd) & 2)
 #define pmd_bad(pmd)		(pmd_val(pmd) & 2)
+#define pmd_present(pmd)	(pmd_val(pmd))
 
 #define copy_pmd(pmdpd,pmdps)		\
 	do {				\
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/pgtable-3level.h linux-libre-4.4.150-gnu/arch/arm/include/asm/pgtable-3level.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/pgtable-3level.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/pgtable-3level.h	2018-08-18 04:45:38.000000000 -0400
@@ -212,6 +212,7 @@ static inline pmd_t *pmd_offset(pud_t *p
 						: !!(pmd_val(pmd) & (val)))
 #define pmd_isclear(pmd, val)	(!(pmd_val(pmd) & (val)))
 
+#define pmd_present(pmd)	(pmd_isset((pmd), L_PMD_SECT_VALID))
 #define pmd_young(pmd)		(pmd_isset((pmd), PMD_SECT_AF))
 #define pte_special(pte)	(pte_isset((pte), L_PTE_SPECIAL))
 static inline pte_t pte_mkspecial(pte_t pte)
@@ -257,10 +258,10 @@ PMD_BIT_FUNC(mkyoung,   |= PMD_SECT_AF);
 #define pfn_pmd(pfn,prot)	(__pmd(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
 #define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
-/* represent a notpresent pmd by zero, this is used by pmdp_invalidate */
+/* represent a notpresent pmd by faulting entry, this is used by pmdp_invalidate */
 static inline pmd_t pmd_mknotpresent(pmd_t pmd)
 {
-	return __pmd(0);
+	return __pmd(pmd_val(pmd) & ~L_PMD_SECT_VALID);
 }
 
 static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/pgtable.h linux-libre-4.4.150-gnu/arch/arm/include/asm/pgtable.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/pgtable.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/pgtable.h	2018-08-18 04:45:38.000000000 -0400
@@ -182,7 +182,6 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD
 #define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
 
 #define pmd_none(pmd)		(!pmd_val(pmd))
-#define pmd_present(pmd)	(pmd_val(pmd))
 
 static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 {
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/psci.h linux-libre-4.4.150-gnu/arch/arm/include/asm/psci.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/psci.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/psci.h	2018-08-18 04:45:38.000000000 -0400
@@ -16,7 +16,7 @@
 
 extern struct smp_operations psci_smp_ops;
 
-#ifdef CONFIG_ARM_PSCI
+#if defined(CONFIG_SMP) && defined(CONFIG_ARM_PSCI)
 bool psci_smp_available(void);
 #else
 static inline bool psci_smp_available(void) { return false; }
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/uaccess.h linux-libre-4.4.150-gnu/arch/arm/include/asm/uaccess.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/uaccess.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/uaccess.h	2018-08-18 04:45:38.000000000 -0400
@@ -251,7 +251,7 @@ extern int __put_user_8(void *, unsigned
 	({								\
 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		const typeof(*(p)) __user *__tmp_p = (p);		\
-		register const typeof(*(p)) __r2 asm("r2") = (x);	\
+		register typeof(*(p)) __r2 asm("r2") = (x);	\
 		register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
 		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/unaligned.h linux-libre-4.4.150-gnu/arch/arm/include/asm/unaligned.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/unaligned.h	1969-12-31 19:00:00.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/unaligned.h	2018-08-18 04:45:38.000000000 -0400
@@ -0,0 +1,27 @@
+#ifndef __ASM_ARM_UNALIGNED_H
+#define __ASM_ARM_UNALIGNED_H
+
+/*
+ * We generally want to set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS on ARMv6+,
+ * but we don't want to use linux/unaligned/access_ok.h since that can lead
+ * to traps on unaligned stm/ldm or strd/ldrd.
+ */
+#include <asm/byteorder.h>
+
+#if defined(__LITTLE_ENDIAN)
+# include <linux/unaligned/le_struct.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_le
+# define put_unaligned	__put_unaligned_le
+#elif defined(__BIG_ENDIAN)
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_be
+# define put_unaligned	__put_unaligned_be
+#else
+# error need to define endianess
+#endif
+
+#endif /* __ASM_ARM_UNALIGNED_H */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/vdso.h linux-libre-4.4.150-gnu/arch/arm/include/asm/vdso.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/vdso.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/vdso.h	2018-08-18 04:45:38.000000000 -0400
@@ -11,8 +11,6 @@ struct mm_struct;
 
 void arm_install_vdso(struct mm_struct *mm, unsigned long addr);
 
-extern char vdso_start, vdso_end;
-
 extern unsigned int vdso_total_pages;
 
 #else /* CONFIG_VDSO */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/xen/events.h linux-libre-4.4.150-gnu/arch/arm/include/asm/xen/events.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/xen/events.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/xen/events.h	2018-08-18 04:45:38.000000000 -0400
@@ -16,7 +16,7 @@ static inline int xen_irqs_disabled(stru
 	return raw_irqs_disabled_flags(regs->ARM_cpsr);
 }
 
-#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr),	\
+#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((long long*)(ptr),\
 							    atomic64_t,	\
 							    counter), (val))
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/include/asm/xen/page-coherent.h linux-libre-4.4.150-gnu/arch/arm/include/asm/xen/page-coherent.h
--- linux-libre-4.4-gnu/arch/arm/include/asm/xen/page-coherent.h	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/include/asm/xen/page-coherent.h	2018-08-18 04:45:38.000000000 -0400
@@ -35,14 +35,21 @@ static inline void xen_dma_map_page(stru
 	     dma_addr_t dev_addr, unsigned long offset, size_t size,
 	     enum dma_data_direction dir, struct dma_attrs *attrs)
 {
-	bool local = XEN_PFN_DOWN(dev_addr) == page_to_xen_pfn(page);
+	unsigned long page_pfn = page_to_xen_pfn(page);
+	unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr);
+	unsigned long compound_pages =
+		(1<<compound_order(page)) * XEN_PFN_PER_PAGE;
+	bool local = (page_pfn <= dev_pfn) &&
+		(dev_pfn - page_pfn < compound_pages);
+
 	/*
-	 * Dom0 is mapped 1:1, while the Linux page can be spanned accross
-	 * multiple Xen page, it's not possible to have a mix of local and
-	 * foreign Xen page. So if the first xen_pfn == mfn the page is local
-	 * otherwise it's a foreign page grant-mapped in dom0. If the page is
-	 * local we can safely call the native dma_ops function, otherwise we
-	 * call the xen specific function.
+	 * Dom0 is mapped 1:1, while the Linux page can span across
+	 * multiple Xen pages, it's not possible for it to contain a
+	 * mix of local and foreign Xen pages. So if the first xen_pfn
+	 * == mfn the page is local otherwise it's a foreign page
+	 * grant-mapped in dom0. If the page is local we can safely
+	 * call the native dma_ops function, otherwise we call the xen
+	 * specific function.
 	 */
 	if (local)
 		__generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs);
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/Kconfig.debug linux-libre-4.4.150-gnu/arch/arm/Kconfig.debug
--- linux-libre-4.4-gnu/arch/arm/Kconfig.debug	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/Kconfig.debug	2018-08-18 04:45:38.000000000 -0400
@@ -162,10 +162,9 @@ choice
 		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
 		  bcm11351, etc...)
 
-	config DEBUG_BCM63XX
+	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
 		depends on ARCH_BCM_63XX
-		select DEBUG_UART_BCM63XX
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -1348,7 +1347,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
 	default "mach/debug-macro.S"
 
@@ -1364,10 +1363,6 @@ config DEBUG_UART_8250
 		ARCH_IOP33X || ARCH_IXP4XX || \
 		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
 
-# Compatibility options for BCM63xx
-config DEBUG_UART_BCM63XX
-	def_bool ARCH_BCM_63XX
-
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
 	default 0x00100a00 if DEBUG_NETX_UART
@@ -1462,7 +1457,7 @@ config DEBUG_UART_PHYS
 	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
 	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
 	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
-	default 0xfffe8600 if DEBUG_UART_BCM63XX
+	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xfffff700 if ARCH_IOP33X
 	depends on ARCH_EP93XX || \
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1474,7 +1469,7 @@ config DEBUG_UART_PHYS
 		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
 		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
 		DEBUG_AT91_UART
 
@@ -1515,7 +1510,7 @@ config DEBUG_UART_VIRT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
 	default 0xfc705000 if DEBUG_ZTE_ZX
-	default 0xfcfe8600 if DEBUG_UART_BCM63XX
+	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
 	default 0xfd000000 if ARCH_SPEAR13XX
 	default 0xfd012000 if ARCH_MV78XX0
@@ -1566,7 +1561,7 @@ config DEBUG_UART_VIRT
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
 		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
 
 config DEBUG_UART_8250_SHIFT
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/Kconfig-nommu linux-libre-4.4.150-gnu/arch/arm/Kconfig-nommu
--- linux-libre-4.4-gnu/arch/arm/Kconfig-nommu	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/Kconfig-nommu	2018-08-18 04:45:38.000000000 -0400
@@ -34,8 +34,7 @@ config PROCESSOR_ID
 	  used instead of the auto-probing which utilizes the register.
 
 config REMAP_VECTORS_TO_RAM
-	bool 'Install vectors to the beginning of RAM' if DRAM_BASE
-	depends on DRAM_BASE
+	bool 'Install vectors to the beginning of RAM'
 	help
 	  The kernel needs to change the hardware exception vectors.
 	  In nommu mode, the hardware exception vectors are normally
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kernel/devtree.c linux-libre-4.4.150-gnu/arch/arm/kernel/devtree.c
--- linux-libre-4.4-gnu/arch/arm/kernel/devtree.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kernel/devtree.c	2018-08-18 04:45:38.000000000 -0400
@@ -87,6 +87,8 @@ void __init arm_dt_init_cpu_maps(void)
 		return;
 
 	for_each_child_of_node(cpus, cpu) {
+		const __be32 *cell;
+		int prop_bytes;
 		u32 hwid;
 
 		if (of_node_cmp(cpu->type, "cpu"))
@@ -98,7 +100,8 @@ void __init arm_dt_init_cpu_maps(void)
 		 * properties is considered invalid to build the
 		 * cpu_logical_map.
 		 */
-		if (of_property_read_u32(cpu, "reg", &hwid)) {
+		cell = of_get_property(cpu, "reg", &prop_bytes);
+		if (!cell || prop_bytes < sizeof(*cell)) {
 			pr_debug(" * %s missing reg property\n",
 				     cpu->full_name);
 			of_node_put(cpu);
@@ -106,10 +109,15 @@ void __init arm_dt_init_cpu_maps(void)
 		}
 
 		/*
-		 * 8 MSBs must be set to 0 in the DT since the reg property
+		 * Bits n:24 must be set to 0 in the DT since the reg property
 		 * defines the MPIDR[23:0].
 		 */
-		if (hwid & ~MPIDR_HWID_BITMASK) {
+		do {
+			hwid = be32_to_cpu(*cell++);
+			prop_bytes -= sizeof(*cell);
+		} while (!hwid && prop_bytes > 0);
+
+		if (prop_bytes || (hwid & ~MPIDR_HWID_BITMASK)) {
 			of_node_put(cpu);
 			return;
 		}
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kernel/entry-header.S linux-libre-4.4.150-gnu/arch/arm/kernel/entry-header.S
--- linux-libre-4.4-gnu/arch/arm/kernel/entry-header.S	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kernel/entry-header.S	2018-08-18 04:45:38.000000000 -0400
@@ -295,6 +295,8 @@
 	mov	r2, sp
 	ldr	r1, [r2, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [r2, #\offset + S_PC]!	@ get pc
+	tst	r1, #PSR_I_BIT | 0x0f
+	bne	1f
 	msr	spsr_cxsf, r1			@ save in spsr_svc
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
 	@ We must avoid clrex due to Cortex-A15 erratum #830321
@@ -309,6 +311,7 @@
 						@ after ldm {}^
 	add	sp, sp, #\offset + S_FRAME_SIZE
 	movs	pc, lr				@ return & move spsr_svc into cpsr
+1:	bug	"Returning to usermode but unexpected PSR bits set?", \@
 #elif defined(CONFIG_CPU_V7M)
 	@ V7M restore.
 	@ Note that we don't need to do clrex here as clearing the local
@@ -324,6 +327,8 @@
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]	@ get pc
 	add	sp, sp, #\offset + S_SP
+	tst	r1, #PSR_I_BIT | 0x0f
+	bne	1f
 	msr	spsr_cxsf, r1			@ save in spsr_svc
 
 	@ We must avoid clrex due to Cortex-A15 erratum #830321
@@ -336,6 +341,7 @@
 	.endif
 	add	sp, sp, #S_FRAME_SIZE - S_SP
 	movs	pc, lr				@ return & move spsr_svc into cpsr
+1:	bug	"Returning to usermode but unexpected PSR bits set?", \@
 #endif	/* !CONFIG_THUMB2_KERNEL */
 	.endm
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kernel/ftrace.c linux-libre-4.4.150-gnu/arch/arm/kernel/ftrace.c
--- linux-libre-4.4-gnu/arch/arm/kernel/ftrace.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kernel/ftrace.c	2018-08-18 04:45:38.000000000 -0400
@@ -29,11 +29,6 @@
 #endif
 
 #ifdef CONFIG_DYNAMIC_FTRACE
-#ifdef CONFIG_OLD_MCOUNT
-#define OLD_MCOUNT_ADDR	((unsigned long) mcount)
-#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
-
-#define	OLD_NOP		0xe1a00000	/* mov r0, r0 */
 
 static int __ftrace_modify_code(void *data)
 {
@@ -51,6 +46,12 @@ void arch_ftrace_update_code(int command
 	stop_machine(__ftrace_modify_code, &command, NULL);
 }
 
+#ifdef CONFIG_OLD_MCOUNT
+#define OLD_MCOUNT_ADDR	((unsigned long) mcount)
+#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
+
+#define	OLD_NOP		0xe1a00000	/* mov r0, r0 */
+
 static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
 {
 	return rec->arch.old_mcount ? OLD_NOP : NOP;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kernel/hw_breakpoint.c linux-libre-4.4.150-gnu/arch/arm/kernel/hw_breakpoint.c
--- linux-libre-4.4-gnu/arch/arm/kernel/hw_breakpoint.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kernel/hw_breakpoint.c	2018-08-18 04:45:38.000000000 -0400
@@ -1066,6 +1066,22 @@ static int __init arch_hw_breakpoint_ini
 		return 0;
 	}
 
+	/*
+	 * Scorpion CPUs (at least those in APQ8060) seem to set DBGPRSR.SPD
+	 * whenever a WFI is issued, even if the core is not powered down, in
+	 * violation of the architecture.  When DBGPRSR.SPD is set, accesses to
+	 * breakpoint and watchpoint registers are treated as undefined, so
+	 * this results in boot time and runtime failures when these are
+	 * accessed and we unexpectedly take a trap.
+	 *
+	 * It's not clear if/how this can be worked around, so we blacklist
+	 * Scorpion CPUs to avoid these issues.
+	*/
+	if (read_cpuid_part() == ARM_CPU_PART_SCORPION) {
+		pr_info("Scorpion CPU detected. Hardware breakpoints and watchpoints disabled\n");
+		return 0;
+	}
+
 	has_ossr = core_has_os_save_restore();
 
 	/* Determine how many BRPs/WRPs are available. */
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kernel/Makefile linux-libre-4.4.150-gnu/arch/arm/kernel/Makefile
--- linux-libre-4.4-gnu/arch/arm/kernel/Makefile	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kernel/Makefile	2018-08-18 04:45:38.000000000 -0400
@@ -73,7 +73,6 @@ obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_regs.o perf_callchain.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_xscale.o perf_event_v6.o \
 				   perf_event_v7.o
-CFLAGS_pj4-cp0.o		:= -marm
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 obj-$(CONFIG_ARM_CPU_TOPOLOGY)  += topology.o
 obj-$(CONFIG_VDSO)		+= vdso.o
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kernel/pj4-cp0.c linux-libre-4.4.150-gnu/arch/arm/kernel/pj4-cp0.c
--- linux-libre-4.4-gnu/arch/arm/kernel/pj4-cp0.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kernel/pj4-cp0.c	2018-08-18 04:45:38.000000000 -0400
@@ -66,9 +66,13 @@ static void __init pj4_cp_access_write(u
 
 	__asm__ __volatile__ (
 		"mcr	p15, 0, %1, c1, c0, 2\n\t"
+#ifdef CONFIG_THUMB2_KERNEL
+		"isb\n\t"
+#else
 		"mrc	p15, 0, %0, c1, c0, 2\n\t"
 		"mov	%0, %0\n\t"
 		"sub	pc, pc, #4\n\t"
+#endif
 		: "=r" (temp) : "r" (value));
 }
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kernel/ptrace.c linux-libre-4.4.150-gnu/arch/arm/kernel/ptrace.c
--- linux-libre-4.4-gnu/arch/arm/kernel/ptrace.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kernel/ptrace.c	2018-08-18 04:45:38.000000000 -0400
@@ -600,7 +600,7 @@ static int gpr_set(struct task_struct *t
 		   const void *kbuf, const void __user *ubuf)
 {
 	int ret;
-	struct pt_regs newregs;
+	struct pt_regs newregs = *task_pt_regs(target);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &newregs,
@@ -733,8 +733,8 @@ static int vfp_set(struct task_struct *t
 	if (ret)
 		return ret;
 
-	vfp_flush_hwstate(thread);
 	thread->vfpstate.hard = new_vfp;
+	vfp_flush_hwstate(thread);
 
 	return 0;
 }
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kernel/smp_tlb.c linux-libre-4.4.150-gnu/arch/arm/kernel/smp_tlb.c
--- linux-libre-4.4-gnu/arch/arm/kernel/smp_tlb.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kernel/smp_tlb.c	2018-08-18 04:45:38.000000000 -0400
@@ -9,6 +9,7 @@
  */
 #include <linux/preempt.h>
 #include <linux/smp.h>
+#include <linux/uaccess.h>
 
 #include <asm/smp_plat.h>
 #include <asm/tlbflush.h>
@@ -40,8 +41,11 @@ static inline void ipi_flush_tlb_mm(void
 static inline void ipi_flush_tlb_page(void *arg)
 {
 	struct tlb_args *ta = (struct tlb_args *)arg;
+	unsigned int __ua_flags = uaccess_save_and_enable();
 
 	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
+
+	uaccess_restore(__ua_flags);
 }
 
 static inline void ipi_flush_tlb_kernel_page(void *arg)
@@ -54,8 +58,11 @@ static inline void ipi_flush_tlb_kernel_
 static inline void ipi_flush_tlb_range(void *arg)
 {
 	struct tlb_args *ta = (struct tlb_args *)arg;
+	unsigned int __ua_flags = uaccess_save_and_enable();
 
 	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+
+	uaccess_restore(__ua_flags);
 }
 
 static inline void ipi_flush_tlb_kernel_range(void *arg)
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kernel/sys_oabi-compat.c linux-libre-4.4.150-gnu/arch/arm/kernel/sys_oabi-compat.c
--- linux-libre-4.4-gnu/arch/arm/kernel/sys_oabi-compat.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kernel/sys_oabi-compat.c	2018-08-18 04:45:38.000000000 -0400
@@ -279,8 +279,12 @@ asmlinkage long sys_oabi_epoll_wait(int
 	mm_segment_t fs;
 	long ret, err, i;
 
-	if (maxevents <= 0 || maxevents > (INT_MAX/sizeof(struct epoll_event)))
+	if (maxevents <= 0 ||
+			maxevents > (INT_MAX/sizeof(*kbuf)) ||
+			maxevents > (INT_MAX/sizeof(*events)))
 		return -EINVAL;
+	if (!access_ok(VERIFY_WRITE, events, sizeof(*events) * maxevents))
+		return -EFAULT;
 	kbuf = kmalloc(sizeof(*kbuf) * maxevents, GFP_KERNEL);
 	if (!kbuf)
 		return -ENOMEM;
@@ -317,6 +321,8 @@ asmlinkage long sys_oabi_semtimedop(int
 
 	if (nsops < 1 || nsops > SEMOPM)
 		return -EINVAL;
+	if (!access_ok(VERIFY_READ, tsops, sizeof(*tsops) * nsops))
+		return -EFAULT;
 	sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
 	if (!sops)
 		return -ENOMEM;
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kernel/traps.c linux-libre-4.4.150-gnu/arch/arm/kernel/traps.c
--- linux-libre-4.4-gnu/arch/arm/kernel/traps.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kernel/traps.c	2018-08-18 04:45:38.000000000 -0400
@@ -19,6 +19,7 @@
 #include <linux/uaccess.h>
 #include <linux/hardirq.h>
 #include <linux/kdebug.h>
+#include <linux/kprobes.h>
 #include <linux/module.h>
 #include <linux/kexec.h>
 #include <linux/bug.h>
@@ -132,30 +133,26 @@ static void dump_mem(const char *lvl, co
 	set_fs(fs);
 }
 
-static void dump_instr(const char *lvl, struct pt_regs *regs)
+static void __dump_instr(const char *lvl, struct pt_regs *regs)
 {
 	unsigned long addr = instruction_pointer(regs);
 	const int thumb = thumb_mode(regs);
 	const int width = thumb ? 4 : 8;
-	mm_segment_t fs;
 	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
 	int i;
 
 	/*
-	 * We need to switch to kernel mode so that we can use __get_user
-	 * to safely read from kernel space.  Note that we now dump the
-	 * code first, just in case the backtrace kills us.
+	 * Note that we now dump the code first, just in case the backtrace
+	 * kills us.
 	 */
-	fs = get_fs();
-	set_fs(KERNEL_DS);
 
 	for (i = -4; i < 1 + !!thumb; i++) {
 		unsigned int val, bad;
 
 		if (thumb)
-			bad = __get_user(val, &((u16 *)addr)[i]);
+			bad = get_user(val, &((u16 *)addr)[i]);
 		else
-			bad = __get_user(val, &((u32 *)addr)[i]);
+			bad = get_user(val, &((u32 *)addr)[i]);
 
 		if (!bad)
 			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
@@ -166,8 +163,20 @@ static void dump_instr(const char *lvl,
 		}
 	}
 	printk("%sCode: %s\n", lvl, str);
+}
 
-	set_fs(fs);
+static void dump_instr(const char *lvl, struct pt_regs *regs)
+{
+	mm_segment_t fs;
+
+	if (!user_mode(regs)) {
+		fs = get_fs();
+		set_fs(KERNEL_DS);
+		__dump_instr(lvl, regs);
+		set_fs(fs);
+	} else {
+		__dump_instr(lvl, regs);
+	}
 }
 
 #ifdef CONFIG_ARM_UNWIND
@@ -387,7 +396,8 @@ void unregister_undef_hook(struct undef_
 	raw_spin_unlock_irqrestore(&undef_lock, flags);
 }
 
-static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
+static nokprobe_inline
+int call_undef_hook(struct pt_regs *regs, unsigned int instr)
 {
 	struct undef_hook *hook;
 	unsigned long flags;
@@ -460,6 +470,7 @@ die_sig:
 
 	arm_notify_die("Oops - undefined instruction", regs, &info, 0, 6);
 }
+NOKPROBE_SYMBOL(do_undefinstr)
 
 /*
  * Handle FIQ similarly to NMI on x86 systems.
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kernel/vdso.c linux-libre-4.4.150-gnu/arch/arm/kernel/vdso.c
--- linux-libre-4.4-gnu/arch/arm/kernel/vdso.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kernel/vdso.c	2018-08-18 04:45:38.000000000 -0400
@@ -38,6 +38,8 @@
 
 static struct page **vdso_text_pagelist;
 
+extern char vdso_start[], vdso_end[];
+
 /* Total number of pages needed for the data and text portions of the VDSO. */
 unsigned int vdso_total_pages __read_mostly;
 
@@ -178,13 +180,13 @@ static int __init vdso_init(void)
 	unsigned int text_pages;
 	int i;
 
-	if (memcmp(&vdso_start, "\177ELF", 4)) {
+	if (memcmp(vdso_start, "\177ELF", 4)) {
 		pr_err("VDSO is not a valid ELF object!\n");
 		return -ENOEXEC;
 	}
 
-	text_pages = (&vdso_end - &vdso_start) >> PAGE_SHIFT;
-	pr_debug("vdso: %i text pages at base %p\n", text_pages, &vdso_start);
+	text_pages = (vdso_end - vdso_start) >> PAGE_SHIFT;
+	pr_debug("vdso: %i text pages at base %p\n", text_pages, vdso_start);
 
 	/* Allocate the VDSO text pagelist */
 	vdso_text_pagelist = kcalloc(text_pages, sizeof(struct page *),
@@ -199,7 +201,7 @@ static int __init vdso_init(void)
 	for (i = 0; i < text_pages; i++) {
 		struct page *page;
 
-		page = virt_to_page(&vdso_start + i * PAGE_SIZE);
+		page = virt_to_page(vdso_start + i * PAGE_SIZE);
 		vdso_text_pagelist[i] = page;
 	}
 
@@ -210,7 +212,7 @@ static int __init vdso_init(void)
 
 	cntvct_ok = cntvct_functional();
 
-	patch_vdso(&vdso_start);
+	patch_vdso(vdso_start);
 
 	return 0;
 }
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kvm/arm.c linux-libre-4.4.150-gnu/arch/arm/kvm/arm.c
--- linux-libre-4.4-gnu/arch/arm/kvm/arm.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kvm/arm.c	2018-08-18 04:45:38.000000000 -0400
@@ -155,8 +155,6 @@ void kvm_arch_destroy_vm(struct kvm *kvm
 {
 	int i;
 
-	kvm_free_stage2_pgd(kvm);
-
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		if (kvm->vcpus[i]) {
 			kvm_arch_vcpu_free(kvm->vcpus[i]);
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kvm/guest.c linux-libre-4.4.150-gnu/arch/arm/kvm/guest.c
--- linux-libre-4.4-gnu/arch/arm/kvm/guest.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kvm/guest.c	2018-08-18 04:45:38.000000000 -0400
@@ -155,7 +155,7 @@ static int get_timer_reg(struct kvm_vcpu
 	u64 val;
 
 	val = kvm_arm_timer_get_reg(vcpu, reg->id);
-	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id));
+	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0;
 }
 
 static unsigned long num_core_regs(void)
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kvm/handle_exit.c linux-libre-4.4.150-gnu/arch/arm/kvm/handle_exit.c
--- linux-libre-4.4-gnu/arch/arm/kvm/handle_exit.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kvm/handle_exit.c	2018-08-18 04:45:38.000000000 -0400
@@ -45,7 +45,7 @@ static int handle_hvc(struct kvm_vcpu *v
 
 	ret = kvm_psci_call(vcpu);
 	if (ret < 0) {
-		kvm_inject_undefined(vcpu);
+		vcpu_set_reg(vcpu, 0, ~0UL);
 		return 1;
 	}
 
@@ -54,7 +54,16 @@ static int handle_hvc(struct kvm_vcpu *v
 
 static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
-	kvm_inject_undefined(vcpu);
+	/*
+	 * "If an SMC instruction executed at Non-secure EL1 is
+	 * trapped to EL2 because HCR_EL2.TSC is 1, the exception is a
+	 * Trap exception, not a Secure Monitor Call exception [...]"
+	 *
+	 * We need to advance the PC after the trap, as it would
+	 * otherwise return to the same address...
+	 */
+	vcpu_set_reg(vcpu, 0, ~0UL);
+	kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
 	return 1;
 }
 
@@ -100,7 +109,19 @@ static int kvm_handle_wfx(struct kvm_vcp
 	return 1;
 }
 
+static int kvm_handle_unknown_ec(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+	u32 hsr = kvm_vcpu_get_hsr(vcpu);
+
+	kvm_pr_unimpl("Unknown exception class: hsr: %#08x\n",
+		      hsr);
+
+	kvm_inject_undefined(vcpu);
+	return 1;
+}
+
 static exit_handle_fn arm_exit_handlers[] = {
+	[0 ... HSR_EC_MAX]	= kvm_handle_unknown_ec,
 	[HSR_EC_WFI]		= kvm_handle_wfx,
 	[HSR_EC_CP15_32]	= kvm_handle_cp15_32,
 	[HSR_EC_CP15_64]	= kvm_handle_cp15_64,
@@ -122,13 +143,6 @@ static exit_handle_fn kvm_get_exit_handl
 {
 	u8 hsr_ec = kvm_vcpu_trap_get_class(vcpu);
 
-	if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers) ||
-	    !arm_exit_handlers[hsr_ec]) {
-		kvm_err("Unknown exception class: hsr: %#08x\n",
-			(unsigned int)kvm_vcpu_get_hsr(vcpu));
-		BUG();
-	}
-
 	return arm_exit_handlers[hsr_ec];
 }
 
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kvm/init.S linux-libre-4.4.150-gnu/arch/arm/kvm/init.S
--- linux-libre-4.4-gnu/arch/arm/kvm/init.S	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kvm/init.S	2018-08-18 04:45:38.000000000 -0400
@@ -110,7 +110,6 @@ __do_hyp_init:
 	@  - Write permission implies XN: disabled
 	@  - Instruction cache: enabled
 	@  - Data/Unified cache: enabled
-	@  - Memory alignment checks: enabled
 	@  - MMU: enabled (this code must be run from an identity mapping)
 	mrc	p15, 4, r0, c1, c0, 0	@ HSCR
 	ldr	r2, =HSCTLR_MASK
@@ -118,8 +117,8 @@ __do_hyp_init:
 	mrc	p15, 0, r1, c1, c0, 0	@ SCTLR
 	ldr	r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C)
 	and	r1, r1, r2
- ARM(	ldr	r2, =(HSCTLR_M | HSCTLR_A)			)
- THUMB(	ldr	r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE)		)
+ ARM(	ldr	r2, =(HSCTLR_M)					)
+ THUMB(	ldr	r2, =(HSCTLR_M | HSCTLR_TE)			)
 	orr	r1, r1, r2
 	orr	r0, r0, r1
 	isb
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kvm/mmio.c linux-libre-4.4.150-gnu/arch/arm/kvm/mmio.c
--- linux-libre-4.4-gnu/arch/arm/kvm/mmio.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kvm/mmio.c	2018-08-18 04:45:38.000000000 -0400
@@ -113,7 +113,7 @@ int kvm_handle_mmio_return(struct kvm_vc
 		}
 
 		trace_kvm_mmio(KVM_TRACE_MMIO_READ, len, run->mmio.phys_addr,
-			       data);
+			       &data);
 		data = vcpu_data_host_to_guest(vcpu, data, len);
 		vcpu_set_reg(vcpu, vcpu->arch.mmio_decode.rt, data);
 	}
@@ -189,14 +189,14 @@ int io_mem_abort(struct kvm_vcpu *vcpu,
 		data = vcpu_data_guest_to_host(vcpu, vcpu_get_reg(vcpu, rt),
 					       len);
 
-		trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, len, fault_ipa, data);
+		trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, len, fault_ipa, &data);
 		mmio_write_buf(data_buf, len, data);
 
 		ret = kvm_io_bus_write(vcpu, KVM_MMIO_BUS, fault_ipa, len,
 				       data_buf);
 	} else {
 		trace_kvm_mmio(KVM_TRACE_MMIO_READ_UNSATISFIED, len,
-			       fault_ipa, 0);
+			       fault_ipa, NULL);
 
 		ret = kvm_io_bus_read(vcpu, KVM_MMIO_BUS, fault_ipa, len,
 				      data_buf);
diff -druNp --no-dereference linux-libre-4.4-gnu/arch/arm/kvm/mmu.c linux-libre-4.4.150-gnu/arch/arm/kvm/mmu.c
--- linux-libre-4.4-gnu/arch/arm/kvm/mmu.c	2016-01-10 18:01:32.000000000 -0500
+++ linux-libre-4.4.150-gnu/arch/arm/kvm/mmu.c	2018-08-18 04:45:38.000000000 -0400
@@ -300,6 +300,14 @@ static void unmap_range(struct kvm *kvm,
 		next = kvm_pgd_addr_end(addr, end);
 		if (!pgd_none(*pgd))
 			unmap_puds(kvm, pgd, addr, next);
+		/*
+		 * If we are dealing with a large range in
+		 * stage2 table, release the kvm->mmu_lock
+		 * to prevent starvation and lockup detector
+		 * warnings.
+		 */
+		if (kvm && (next != end))
+			cond_resched_lock(&kvm->mmu_lock);
 	} while (pgd++, addr = next, addr != end);
 }
 
@@ -738,6 +746,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm
  */
 static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size)
 {
+	assert_spin_locked(&kvm->mmu_lock);
 	unmap_range(kvm, kvm->arch.pgd, start, size);
 }
 
@@ -796,6 +805,7 @@ void stage2_unmap_vm(struct kvm *kvm)
 	int idx;
 
 	idx = srcu_read_lock(&kvm->srcu);
+	down_read(&current->mm->mmap_sem);
 	spin_lock(&kvm->mmu_lock);
 
 	slots = kvm_memslots(kvm);
@@ -803,6 +813,7 @@ void stage2_unmap_vm(struct kvm *kvm)
 		stage2_unmap_memslot(kvm, memslot);
 
 	spin_unlock(&kvm->mmu_lock);
+	up_read(&current->mm->mmap_sem);
 	srcu_read_unlock(&kvm->srcu, idx);
 }
 
@@ -813,21 +824,25 @@ void stage2_unmap_vm(struct kvm *kvm)
  * Walks the level-1 page table pointed to by kvm->arch.pgd and frees all
  * underlying level-2 and level-3 tables before freeing the actual level-1 table
  * and setting the struct pointer to NULL.
- *
- * Note we don't need locking here as this is only called when the VM is
- * destroyed, which can only be done once.
  */
 void kvm_free_stage2_pgd(struct kvm *kvm)
 {
-	if (kvm->arch.pgd == NULL)
-		return;
+	void *pgd = NULL;
+	void *hwpgd = NULL;
 
-	unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE);
-	kvm_free_hwpgd(kvm_get_hwpgd(kvm));
-	if (KVM_PREALLOC_LEVEL > 0)
-		kfree(kvm->arch.pgd);
+	spin_lock(&kvm->mmu_lock);
+	if (kvm->arch.pgd) {
+		unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE);
+		pgd = READ_ONCE(kvm->arch.pgd);
+		hwpgd = kvm_get_hwpgd(kvm);
+		kvm->arch.pgd = NULL;
+	}
+	spin_unlock(&kvm->mmu_lock);
 
-	kvm->arch.pgd = NULL;
+	if (hwpgd)
+		kvm_free_hwpgd(hwpgd);
+	if (KVM_PREALLOC_LEVEL > 0 && pgd)
+		kfree(pgd);
 }
 
 static pud_t *stage2_get_pud(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,