diff --git linux-libre-5.12-gnu/Documentation/admin-guide/README.rst linux-libre-5.12.4-gnu/Documentation/admin-guide/README.rst
index bbe457d0c729..cbf4d553412e 100644
--- linux-libre-5.12-gnu/Documentation/admin-guide/README.rst
+++ linux-libre-5.12.4-gnu/Documentation/admin-guide/README.rst
@@ -39,6 +39,12 @@ What is GNU Linux-libre?
   promotion.  See our web page for their images.
   http://linux-libre.fsfla.org/
 
+  If you are the author of an awesome program and want to join us in
+  writing Free (libre) Software, please consider making it an official
+  GNU program and become a GNU Maintainer.  You can find instructions
+  on how to do so at https://www.gnu.org/help/evaluation.  We look
+  forward to hacking with you! :)
+
 What is Linux?
 --------------
 
diff --git linux-libre-5.12-gnu/Documentation/admin-guide/kernel-parameters.txt linux-libre-5.12.4-gnu/Documentation/admin-guide/kernel-parameters.txt
index 04545725f187..835f810f2f26 100644
--- linux-libre-5.12-gnu/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-5.12.4-gnu/Documentation/admin-guide/kernel-parameters.txt
@@ -1869,13 +1869,6 @@
 			bypassed by not enabling DMAR with this option. In
 			this case, gfx device will use physical address for
 			DMA.
-		forcedac [X86-64]
-			With this option iommu will not optimize to look
-			for io virtual address below 32-bit forcing dual
-			address cycle on pci bus for cards supporting greater
-			than 32-bit addressing. The default is to look
-			for translation below 32-bit and if not available
-			then look in the higher range.
 		strict [Default Off]
 			With this option on every unmap_single operation will
 			result in a hardware IOTLB flush operation as opposed
@@ -1964,6 +1957,14 @@
 		nobypass	[PPC/POWERNV]
 			Disable IOMMU bypass, using IOMMU for PCI devices.
 
+	iommu.forcedac=	[ARM64, X86] Control IOVA allocation for PCI devices.
+			Format: { "0" | "1" }
+			0 - Try to allocate a 32-bit DMA address first, before
+			  falling back to the full range if needed.
+			1 - Allocate directly from the full usable range,
+			  forcing Dual Address Cycle for PCI cards supporting
+			  greater than 32-bit addressing.
+
 	iommu.strict=	[ARM64] Configure TLB invalidation behaviour
 			Format: { "0" | "1" }
 			0 - Lazy mode.
diff --git linux-libre-5.12-gnu/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml linux-libre-5.12.4-gnu/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 8631678283f9..865be05083c3 100644
--- linux-libre-5.12-gnu/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ linux-libre-5.12.4-gnu/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -80,7 +80,8 @@ required:
   - interrupts
   - clocks
 
-additionalProperties: false
+additionalProperties:
+  type: object
 
 examples:
   - |
diff --git linux-libre-5.12-gnu/Documentation/driver-api/xilinx/eemi.rst linux-libre-5.12.4-gnu/Documentation/driver-api/xilinx/eemi.rst
index 9dcbc6f18d75..c1bc47b9000d 100644
--- linux-libre-5.12-gnu/Documentation/driver-api/xilinx/eemi.rst
+++ linux-libre-5.12.4-gnu/Documentation/driver-api/xilinx/eemi.rst
@@ -16,35 +16,8 @@ components running across different processing clusters on a chip or
 device to communicate with a power management controller (PMC) on a
 device to issue or respond to power management requests.
 
-EEMI ops is a structure containing all eemi APIs supported by Zynq MPSoC.
-The zynqmp-firmware driver maintain all EEMI APIs in zynqmp_eemi_ops
-structure. Any driver who want to communicate with PMC using EEMI APIs
-can call zynqmp_pm_get_eemi_ops().
-
-Example of EEMI ops::
-
-	/* zynqmp-firmware driver maintain all EEMI APIs */
-	struct zynqmp_eemi_ops {
-		int (*get_api_version)(u32 *version);
-		int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
-	};
-
-	static const struct zynqmp_eemi_ops eemi_ops = {
-		.get_api_version = zynqmp_pm_get_api_version,
-		.query_data = zynqmp_pm_query_data,
-	};
-
-Example of EEMI ops usage::
-
-	static const struct zynqmp_eemi_ops *eemi_ops;
-	u32 ret_payload[PAYLOAD_ARG_CNT];
-	int ret;
-
-	eemi_ops = zynqmp_pm_get_eemi_ops();
-	if (IS_ERR(eemi_ops))
-		return PTR_ERR(eemi_ops);
-
-	ret = eemi_ops->query_data(qdata, ret_payload);
+Any driver who wants to communicate with PMC using EEMI APIs use the
+functions provided for each function.
 
 IOCTL
 ------
diff --git linux-libre-5.12-gnu/Documentation/userspace-api/media/v4l/subdev-formats.rst linux-libre-5.12.4-gnu/Documentation/userspace-api/media/v4l/subdev-formats.rst
index 7f16cbe46e5c..e6a9faa81197 100644
--- linux-libre-5.12-gnu/Documentation/userspace-api/media/v4l/subdev-formats.rst
+++ linux-libre-5.12.4-gnu/Documentation/userspace-api/media/v4l/subdev-formats.rst
@@ -1567,8 +1567,8 @@ The following tables list existing packed RGB formats.
       - MEDIA_BUS_FMT_RGB101010_1X30
       - 0x1018
       -
-      - 0
-      - 0
+      -
+      -
       - r\ :sub:`9`
       - r\ :sub:`8`
       - r\ :sub:`7`
diff --git linux-libre-5.12-gnu/Makefile linux-libre-5.12.4-gnu/Makefile
index 15711f4b21b8..2f0cd8081280 100644
--- linux-libre-5.12-gnu/Makefile
+++ linux-libre-5.12.4-gnu/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 12
-SUBLEVEL = 0
+SUBLEVEL = 4
 EXTRAVERSION = -gnu
 NAME = Frozen Wasteland
 
@@ -775,16 +775,16 @@ KBUILD_CFLAGS += -Wno-gnu
 KBUILD_CFLAGS += -mno-global-merge
 else
 
-# These warnings generated too much noise in a regular build.
-# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
-KBUILD_CFLAGS += -Wno-unused-but-set-variable
-
 # Warn about unmarked fall-throughs in switch statement.
 # Disabled for clang while comment to attribute conversion happens and
 # https://github.com/ClangBuiltLinux/linux/issues/636 is discussed.
 KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough,)
 endif
 
+# These warnings generated too much noise in a regular build.
+# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
diff --git linux-libre-5.12-gnu/arch/arm/boot/compressed/Makefile linux-libre-5.12.4-gnu/arch/arm/boot/compressed/Makefile
index fd94e27ba4fa..c1f804768621 100644
--- linux-libre-5.12-gnu/arch/arm/boot/compressed/Makefile
+++ linux-libre-5.12.4-gnu/arch/arm/boot/compressed/Makefile
@@ -118,8 +118,8 @@ asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
 KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \
-		sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
-		       -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
+		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 6c9804d2f3b4..6df1ce545061 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -713,9 +713,9 @@
 	multi-master;
 	status = "okay";
 
-	si7021-a20@20 {
+	si7021-a20@40 {
 		compatible = "silabs,si7020";
-		reg = <0x20>;
+		reg = <0x40>;
 	};
 
 	tmp275@48 {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts
index 775ceb3acb6c..edca66c232c1 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAM9X60-EK";
@@ -84,7 +85,7 @@
 		sw1 {
 			label = "SW1";
 			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-			linux,code=<0x104>;
+			linux,code=<KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 84e1180f3e89..a9e6fee55a2a 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -11,6 +11,7 @@
 #include "at91-sama5d27_som1.dtsi"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel SAMA5D27 SOM1 EK";
@@ -466,7 +467,7 @@
 		pb4 {
 			label = "USER";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 180a08765cb8..ff83967fd008 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAMA5D27 WLSOM1 EK";
@@ -35,7 +36,7 @@
 		sw4 {
 			label = "USER BUTTON";
 			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 46722a163184..bd64721fa23c 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -12,6 +12,7 @@
 #include "sama5d2.dtsi"
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 
 / {
@@ -51,7 +52,7 @@
 		sw4 {
 			label = "USER_PB1";
 			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 8de57d164acd..dfd150eb0fd8 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -11,6 +11,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/at91.h>
 
 / {
@@ -402,7 +403,7 @@
 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d2_xplained.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 4e7cf21f124c..509c732a0d8b 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -10,6 +10,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
 
 / {
@@ -712,7 +713,7 @@
 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 5179258f9247..9c55a921263b 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "SAMA5D3 Xplained";
@@ -354,7 +355,7 @@
 		bp3 {
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91sam9260ek.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91sam9260ek.dts
index d3446e42b598..ce96345d28a3 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91sam9260ek.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91sam9260ek.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel at91sam9260ek";
@@ -156,7 +157,7 @@
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 6e6e672c0b86..87bb39060e8b 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -5,6 +5,7 @@
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 #include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 
@@ -234,7 +235,7 @@
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index 6a96655d8626..8ed403767540 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index 3b0029e61b4c..667b118ba4ee 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 90f57bad6b24..ff31ce45831a 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	spi {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index fed75e6ab58c..61c7b137607e 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -22,8 +22,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 79542e18915c..4c60eda296d9 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 51c64f0b2560..9ca6d1b2590d 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index c29950b43a95..0e273c598732 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index 2f2d2b0a6893..d857751ec507 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 0e349e39f608..8b1a05a0f1a1 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 8f1e565c3db4..6c6bb7b17d27 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -21,8 +21,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index ce888b1835d1..d29e7f80ea6a 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -21,8 +21,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
index ed8619b54d69..38fbefdf2e4e 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -18,8 +18,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index 1f87993eae1d..7989a53597d4 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -21,8 +21,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 6c6199a53d09..87b655be674c 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -32,8 +32,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 911c65fbf251..e635a15041dd 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	nand: nand@18028000 {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 3725f2b0d60b..4b24b25389b5 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
index 50f7cd08cfbb..a6dc99955e19 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
index bcc420f85b56..ff98837bc0db 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 4f8d777ae18d..452b8d0ab180 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -18,8 +18,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index e17e9a17fb00..b76bfe6efcd4 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 60cc87ecc7ec..32d5a50578ec 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-netgear-r8500.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index f42a1703f4ab..42097a4c2659 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-phicomm-k3.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
index ac3a4483dcb3..a2566ad4619c 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
@@ -15,8 +15,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4210-i9100.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
index 304a8ee2364c..d98c78207aaf 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -136,7 +136,7 @@
 			compatible = "maxim,max17042";
 
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
 			pinctrl-0 = <&max17042_fuel_irq>;
 			pinctrl-names = "default";
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi linux-libre-5.12.4-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi
index 111c32bae02c..fc77c1bfd844 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -173,7 +173,7 @@
 		pmic@66 {
 			compatible = "maxim,max77693";
 			interrupt-parent = <&gpx1>;
-			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77693_irq>;
 			reg = <0x66>;
@@ -221,7 +221,7 @@
 		fuel-gauge@36 {
 			compatible = "maxim,max17047";
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77693_fuel_irq>;
 			reg = <0x36>;
@@ -665,7 +665,7 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&max77686_irq>;
 		pinctrl-names = "default";
 		reg = <0x09>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4412-odroid-common.dtsi linux-libre-5.12.4-gnu/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 2b20d9095d9f..eebe6a3952ce 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -278,7 +278,7 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		reg = <0x09>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4412-p4note.dtsi linux-libre-5.12.4-gnu/arch/arm/boot/dts/exynos4412-p4note.dtsi
index b2f9d5448a18..9e750890edb8 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -146,7 +146,7 @@
 			pinctrl-0 = <&fuel_alert_irq>;
 			pinctrl-names = "default";
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			maxim,rsns-microohm = <10000>;
 			maxim,over-heat-temp = <600>;
 			maxim,over-volt = <4300>;
@@ -322,7 +322,7 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&max77686_irq>;
 		pinctrl-names = "default";
 		reg = <0x09>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 8b5a79a8720c..39bbe18145cf 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -134,7 +134,7 @@
 		compatible = "maxim,max77686";
 		reg = <0x09>;
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		#clock-cells = <1>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/exynos5250-snow-common.dtsi linux-libre-5.12.4-gnu/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 6635f6184051..2335c4687349 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -292,7 +292,7 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		wakeup-source;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 0cda654371ae..56ee02ceba7d 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -575,7 +575,7 @@
 			maxim,rcomp = /bits/ 8 <0x4d>;
 
 			interrupt-parent = <&msmgpio>;
-			interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&fuelgauge_pin>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index a0f7f461f48c..2dadb836c5fe 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -717,7 +717,7 @@
 			maxim,rcomp = /bits/ 8 <0x56>;
 
 			interrupt-parent = <&pma8084_gpios>;
-			interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&fuelgauge_pin>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7790-lager.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/r8a7790-lager.dts
index 09a152b91557..1d6f0c5d02e9 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7790-lager.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/r8a7790-lager.dts
@@ -53,6 +53,9 @@
 		i2c11 = &i2cexio1;
 		i2c12 = &i2chdmi;
 		i2c13 = &i2cpwr;
+		mmc0 = &mmcif1;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts
index f603cba5441f..6af1727b8269 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -53,6 +53,9 @@
 		i2c12 = &i2cexio1;
 		i2c13 = &i2chdmi;
 		i2c14 = &i2cexio4;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7791-porter.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/r8a7791-porter.dts
index c6d563fb7ec7..bf51e29c793a 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7791-porter.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/r8a7791-porter.dts
@@ -28,6 +28,8 @@
 		serial0 = &scif0;
 		i2c9 = &gpioi2c2;
 		i2c10 = &i2chdmi;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7793-gose.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/r8a7793-gose.dts
index abf487e8fe0f..2b59a0491350 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7793-gose.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/r8a7793-gose.dts
@@ -49,6 +49,9 @@
 		i2c10 = &gpioi2c4;
 		i2c11 = &i2chdmi;
 		i2c12 = &i2cexio4;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7794-alt.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/r8a7794-alt.dts
index 3f1cc5bbf329..32025986b3b9 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7794-alt.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/r8a7794-alt.dts
@@ -19,6 +19,9 @@
 		i2c10 = &gpioi2c4;
 		i2c11 = &i2chdmi;
 		i2c12 = &i2cexio4;
+		mmc0 = &mmcif0;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi1;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7794-silk.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/r8a7794-silk.dts
index 677596f6c9c9..af066ee5e275 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/r8a7794-silk.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/r8a7794-silk.dts
@@ -31,6 +31,8 @@
 		serial0 = &scif2;
 		i2c9 = &gpioi2c1;
 		i2c10 = &i2chdmi;
+		mmc0 = &mmcif0;
+		mmc1 = &sdhi1;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/s5pv210-fascinate4g.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index ca064359dd30..b47d8300e536 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -115,7 +115,7 @@
 	compatible = "maxim,max77836-battery";
 
 	interrupt-parent = <&gph3>;
-	interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&fg_irq>;
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi linux-libre-5.12.4-gnu/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
index cb3677f0a1cb..b580397ede83 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -8,37 +8,43 @@
 / {
 	soc {
 		i2c@80128000 {
-			/* Marked:
-			 * 129
-			 * M35
-			 * L3GD20
-			 */
-			l3gd20@6a {
-				/* Gyroscope */
-				compatible = "st,l3gd20";
-				status = "disabled";
+			accelerometer@19 {
+				compatible = "st,lsm303dlhc-accel";
 				st,drdy-int-pin = <1>;
-				drive-open-drain;
-				reg = <0x6a>; // 0x6a or 0x6b
+				reg = <0x19>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
 			};
-			/*
-			 * Marked:
-			 * 2122
-			 * C3H
-			 * DQEEE
-			 * LIS3DH?
-			 */
-			lis3dh@18 {
-				/* Accelerometer */
-				compatible = "st,lis3dh-accel";
+			magnetometer@1e {
+				compatible = "st,lsm303dlm-magn";
 				st,drdy-int-pin = <1>;
-				reg = <0x18>;
+				reg = <0x1e>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				// This interrupt is not properly working with the driver
+				// interrupt-parent = <&gpio1>;
+				// interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&accel_tvk_mode>;
+				pinctrl-0 = <&magn_tvk_mode>;
+			};
+			gyroscope@68 {
+				/* Gyroscope */
+				compatible = "st,l3g4200d-gyro";
+				reg = <0x68>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+			pressure@5c {
+				/* Barometer/pressure sensor */
+				compatible = "st,lps001wp-press";
+				reg = <0x5c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
 			};
 		};
 
@@ -54,5 +60,26 @@
 				};
 			};
 		};
+
+		pinctrl {
+			accelerometer {
+				accel_tvk_mode: accel_tvk {
+					/* Accelerometer interrupt lines 1 & 2 */
+					tvk_cfg {
+						pins = "GPIO82_C1", "GPIO83_D3";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+			magnetometer {
+				magn_tvk_mode: magn_tvk {
+					/* GPIO 32 used for DRDY, pull this down */
+					tvk_cfg {
+						pins = "GPIO32_V2";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi linux-libre-5.12.4-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 7b4249ed1983..060baa8b7e9d 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1891,10 +1891,15 @@
 	usart2_idle_pins_c: usart2-idle-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
-				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
 				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
 			bias-disable;
 		};
@@ -1940,10 +1945,15 @@
 	usart3_idle_pins_b: usart3-idle-1 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
 				 <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
@@ -1976,10 +1986,15 @@
 	usart3_idle_pins_c: usart3-idle-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
 				 <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts linux-libre-5.12.4-gnu/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index d3b99535d755..f9c0f6884cc1 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -448,7 +448,7 @@
 
 			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
 
-			avdd-supply = <&vdd_3v3_sys>;
+			vdda-supply = <&vdd_3v3_sys>;
 			vdd-supply  = <&vdd_3v3_sys>;
 		};
 
diff --git linux-libre-5.12-gnu/arch/arm/boot/dts/uniphier-pxs2.dtsi linux-libre-5.12.4-gnu/arch/arm/boot/dts/uniphier-pxs2.dtsi
index b0b15c97306b..e81e5937a60a 100644
--- linux-libre-5.12-gnu/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -583,7 +583,7 @@
 			clocks = <&sys_clk 6>;
 			reset-names = "ether";
 			resets = <&sys_rst 6>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 0>;
 
diff --git linux-libre-5.12-gnu/arch/arm/crypto/blake2s-core.S linux-libre-5.12.4-gnu/arch/arm/crypto/blake2s-core.S
index bed897e9a181..86345751bbf3 100644
--- linux-libre-5.12-gnu/arch/arm/crypto/blake2s-core.S
+++ linux-libre-5.12.4-gnu/arch/arm/crypto/blake2s-core.S
@@ -8,6 +8,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 
 	// Registers used to hold message words temporarily.  There aren't
 	// enough ARM registers to hold the whole message block, so we have to
@@ -38,6 +39,23 @@
 #endif
 .endm
 
+.macro _le32_bswap	a, tmp
+#ifdef __ARMEB__
+	rev_l		\a, \tmp
+#endif
+.endm
+
+.macro _le32_bswap_8x	a, b, c, d, e, f, g, h,  tmp
+	_le32_bswap	\a, \tmp
+	_le32_bswap	\b, \tmp
+	_le32_bswap	\c, \tmp
+	_le32_bswap	\d, \tmp
+	_le32_bswap	\e, \tmp
+	_le32_bswap	\f, \tmp
+	_le32_bswap	\g, \tmp
+	_le32_bswap	\h, \tmp
+.endm
+
 // Execute a quarter-round of BLAKE2s by mixing two columns or two diagonals.
 // (a0, b0, c0, d0) and (a1, b1, c1, d1) give the registers containing the two
 // columns/diagonals.  s0-s1 are the word offsets to the message words the first
@@ -180,8 +198,10 @@ ENTRY(blake2s_compress_arch)
 	tst		r1, #3
 	bne		.Lcopy_block_misaligned
 	ldmia		r1!, {r2-r9}
+	_le32_bswap_8x	r2, r3, r4, r5, r6, r7, r8, r9,  r14
 	stmia		r12!, {r2-r9}
 	ldmia		r1!, {r2-r9}
+	_le32_bswap_8x	r2, r3, r4, r5, r6, r7, r8, r9,  r14
 	stmia		r12, {r2-r9}
 .Lcopy_block_done:
 	str		r1, [sp, #68]		// Update message pointer
@@ -268,6 +288,7 @@ ENTRY(blake2s_compress_arch)
 1:
 #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 	ldr		r3, [r1], #4
+	_le32_bswap	r3, r4
 #else
 	ldrb		r3, [r1, #0]
 	ldrb		r4, [r1, #1]
diff --git linux-libre-5.12-gnu/arch/arm/crypto/curve25519-core.S linux-libre-5.12.4-gnu/arch/arm/crypto/curve25519-core.S
index be18af52e7dc..b697fa5d059a 100644
--- linux-libre-5.12-gnu/arch/arm/crypto/curve25519-core.S
+++ linux-libre-5.12.4-gnu/arch/arm/crypto/curve25519-core.S
@@ -10,8 +10,8 @@
 #include <linux/linkage.h>
 
 .text
-.fpu neon
 .arch armv7-a
+.fpu neon
 .align 4
 
 ENTRY(curve25519_neon)
diff --git linux-libre-5.12-gnu/arch/arm/crypto/poly1305-glue.c linux-libre-5.12.4-gnu/arch/arm/crypto/poly1305-glue.c
index 3023c1acfa19..c31bd8f7c092 100644
--- linux-libre-5.12-gnu/arch/arm/crypto/poly1305-glue.c
+++ linux-libre-5.12.4-gnu/arch/arm/crypto/poly1305-glue.c
@@ -29,7 +29,7 @@ void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit)
 
 static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
 
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
 {
 	poly1305_init_arm(&dctx->h, key);
 	dctx->s[0] = get_unaligned_le32(key + 16);
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts linux-libre-5.12.4-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 6e4ad66ff536..8d5d368dbe90 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -65,6 +65,7 @@
 	port@7 {
 		label = "sw";
 		reg = <7>;
+		phy-mode = "rgmii";
 
 		fixed-link {
 			speed = <1000>;
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 9354077f74cd..9e799328c6db 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -131,7 +131,7 @@
 			status = "disabled";
 		};
 
-		ethernet-switch@80000 {
+		bus@80000 {
 			compatible = "simple-bus";
 			#size-cells = <1>;
 			#address-cells = <1>;
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts linux-libre-5.12.4-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
index 0d38327043f8..cd3c3edd48fa 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
@@ -28,6 +28,10 @@
 	ti,termination-current = <144000>;  /* uA */
 };
 
+&buck3_reg {
+	regulator-always-on;
+};
+
 &proximity {
 	proximity-near-level = <25>;
 };
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 7a2df148c6a3..456dcd4a7793 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -156,7 +156,8 @@
 			};
 
 			nb_periph_clk: nb-periph-clk@13000 {
-				compatible = "marvell,armada-3700-periph-clock-nb";
+				compatible = "marvell,armada-3700-periph-clock-nb",
+					     "syscon";
 				reg = <0x13000 0x100>;
 				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
 				<&tbg 3>, <&xtalclk>;
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts linux-libre-5.12.4-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 6dffada2e66b..28aa634c9780 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -294,7 +294,7 @@
 
 &pwrap {
 	/* Only MT8173 E1 needs USB power domain */
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+	power-domains = <&spm MT8173_POWER_DOMAIN_USB>;
 
 	pmic: mt6397 {
 		compatible = "mediatek,mt6397";
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 7fa870e4386a..ecb37a7e6870 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1235,7 +1235,7 @@
 				 <&mmsys CLK_MM_DSI1_DIGITAL>,
 				 <&mipi_tx1>;
 			clock-names = "engine", "digital", "hs";
-			phy = <&mipi_tx1>;
+			phys = <&mipi_tx1>;
 			phy-names = "dphy";
 			status = "disabled";
 		};
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 80519a145f13..16f4b1fc0fb9 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -983,6 +983,9 @@
 			compatible = "mediatek,mt8183-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
 		};
 
 		ovl0: ovl@14008000 {
@@ -1058,6 +1061,7 @@
 			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
 		};
 
 		aal0: aal@14010000 {
@@ -1067,6 +1071,7 @@
 			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_AAL0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
 		};
 
 		gamma0: gamma@14011000 {
@@ -1075,6 +1080,7 @@
 			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
 		};
 
 		dither0: dither@14012000 {
@@ -1083,6 +1089,7 @@
 			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
 		};
 
 		dsi0: dsi@14014000 {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 63fd70086bb8..9f27e7ed5e22 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -56,7 +56,7 @@
 	tca6416: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
-		reset-gpios = <&pio 65 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pio 65 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tca6416_pins>;
 
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 2dcc445f6d46..30a795653ecb 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -22,9 +22,11 @@
 			thermal-sensors = <&pm6150_adc_tm 1>;
 
 			trips {
-				temperature = <125000>;
-				hysteresis = <1000>;
-				type = "critical";
+				charger-crit {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
 			};
 		};
 	};
@@ -768,17 +770,17 @@ hp_i2c: &i2c9 {
 };
 
 &spi0 {
-	pinctrl-0 = <&qup_spi0_cs_gpio>;
+	pinctrl-0 = <&qup_spi0_cs_gpio_init_high>, <&qup_spi0_cs_gpio>;
 	cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
 };
 
 &spi6 {
-	pinctrl-0 = <&qup_spi6_cs_gpio>;
+	pinctrl-0 = <&qup_spi6_cs_gpio_init_high>, <&qup_spi6_cs_gpio>;
 	cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
 };
 
 ap_spi_fp: &spi10 {
-	pinctrl-0 = <&qup_spi10_cs_gpio>;
+	pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
 	cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
 
 	cros_ec_fp: ec@0 {
@@ -1339,6 +1341,27 @@ ap_spi_fp: &spi10 {
 		};
 	};
 
+	qup_spi0_cs_gpio_init_high: qup-spi0-cs-gpio-init-high {
+		pinconf {
+			pins = "gpio37";
+			output-high;
+		};
+	};
+
+	qup_spi6_cs_gpio_init_high: qup-spi6-cs-gpio-init-high {
+		pinconf {
+			pins = "gpio62";
+			output-high;
+		};
+	};
+
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
+		pinconf {
+			pins = "gpio89";
+			output-high;
+		};
+	};
+
 	qup_uart3_sleep: qup-uart3-sleep {
 		pinmux {
 			pins = "gpio38", "gpio39",
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts linux-libre-5.12.4-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index e614b7830722..c8537bc5d1cb 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1015,7 +1015,7 @@
 		left_spkr: wsa8810-left{
 			compatible = "sdw10217201000";
 			reg = <0 1>;
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrLeft";
 			#sound-dai-cells = <0>;
@@ -1023,7 +1023,7 @@
 
 		right_spkr: wsa8810-right{
 			compatible = "sdw10217201000";
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 			reg = <0 2>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrRight";
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 454f794af547..6a2ed02d383d 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2382,7 +2382,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 150>;
+			gpio-ranges = <&tlmm 0 0 151>;
 			wakeup-parent = <&pdc_intc>;
 
 			cci0_default: cci0-default {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
index e5bb17bc2f46..778613d3410b 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -914,7 +914,7 @@
 			      <0x0 0x03D00000 0x0 0x300000>;
 			reg-names = "west", "east", "north", "south";
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&tlmm 0 0 175>;
+			gpio-ranges = <&tlmm 0 0 176>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 947e1accae3a..46a6c18cea91 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -279,7 +279,7 @@
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	psci {
@@ -2327,10 +2327,9 @@
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
-			interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
-					<&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
 					<&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
-			interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+			interconnect-names = "mdp0-mem", "mdp1-mem";
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
@@ -2580,7 +2579,7 @@
 
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sm8250-dispcc";
-			reg = <0 0x0af00000 0 0x20000>;
+			reg = <0 0x0af00000 0 0x10000>;
 			mmcx-supply = <&mmcx_reg>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&dsi0_phy 0>,
@@ -2588,28 +2587,14 @@
 				 <&dsi1_phy 0>,
 				 <&dsi1_phy 1>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
-				 <&sleep_clk>;
+				 <0>;
 			clock-names = "bi_tcxo",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",
 				      "dsi1_phy_pll_out_byteclk",
 				      "dsi1_phy_pll_out_dsiclk",
-				      "dp_link_clk_divsel_ten",
-				      "dp_vco_divided_clk_src_mux",
-				      "dptx1_phy_pll_link_clk",
-				      "dptx1_phy_pll_vco_div_clk",
-				      "dptx2_phy_pll_link_clk",
-				      "dptx2_phy_pll_vco_div_clk",
-				      "edp_phy_pll_link_clk",
-				      "edp_phy_pll_vco_div_clk",
-				      "sleep_clk";
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -2689,7 +2674,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 180>;
+			gpio-ranges = <&tlmm 0 0 181>;
 			wakeup-parent = <&pdc>;
 
 			pri_mi2s_active: pri-mi2s-active {
@@ -3754,7 +3739,7 @@
 				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11
 				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 12
+			     <GIC_PPI 10
 				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 5ef460458f5c..e2fca420e518 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -153,7 +153,7 @@
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	psci {
@@ -382,7 +382,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 203>;
+			gpio-ranges = <&tlmm 0 0 204>;
 
 			qup_uart3_default_state: qup-uart3-default-state {
 				rx {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/hihope-common.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 7a3da9b06f67..0c7e6f790590 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -12,6 +12,9 @@
 	aliases {
 		serial0 = &scif2;
 		serial1 = &hscif0;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
index 501cb05da228..3cf2e076940f 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
@@ -21,6 +21,9 @@
 		serial4 = &hscif2;
 		serial5 = &scif5;
 		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
index 71763f4402a7..3c0d59def8ee 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
@@ -22,6 +22,9 @@
 		serial5 = &scif5;
 		serial6 = &scif4;
 		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index ea87cb5a459c..33257c6440b2 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -17,6 +17,8 @@
 	aliases {
 		serial0 = &scif2;
 		serial1 = &hscif2;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi3;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
index 273f062f2909..7b6649a3ded0 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
@@ -22,6 +22,9 @@
 		serial5 = &scif5;
 		serial6 = &scif4;
 		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a77980.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index ec7ca72399ec..1ffa4a995a7a 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -992,8 +992,8 @@
 
 					reg = <1>;
 
-					vin4csi41: endpoint@2 {
-						reg = <2>;
+					vin4csi41: endpoint@3 {
+						reg = <3>;
 						remote-endpoint = <&csi41vin4>;
 					};
 				};
@@ -1020,8 +1020,8 @@
 
 					reg = <1>;
 
-					vin5csi41: endpoint@2 {
-						reg = <2>;
+					vin5csi41: endpoint@3 {
+						reg = <3>;
 						remote-endpoint = <&csi41vin5>;
 					};
 				};
@@ -1048,8 +1048,8 @@
 
 					reg = <1>;
 
-					vin6csi41: endpoint@2 {
-						reg = <2>;
+					vin6csi41: endpoint@3 {
+						reg = <3>;
 						remote-endpoint = <&csi41vin6>;
 					};
 				};
@@ -1076,8 +1076,8 @@
 
 					reg = <1>;
 
-					vin7csi41: endpoint@2 {
-						reg = <2>;
+					vin7csi41: endpoint@3 {
+						reg = <3>;
 						remote-endpoint = <&csi41vin7>;
 					};
 				};
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index f74f8b9993f1..6d6cdc4c324b 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -16,6 +16,9 @@
 	aliases {
 		serial0 = &scif2;
 		ethernet0 = &avb;
+		mmc0 = &sdhi3;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi1;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index dfd6ae8b564f..86ac48e2c849 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -60,10 +60,7 @@
 
 	pmu_a76 {
 		compatible = "arm,cortex-a76-pmu";
-		interrupts-extended = <&gic GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-				      <&gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	/* External SCIF clock - to be overridden by boards that provide it */
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/salvator-common.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index c22bb38994e8..15bb1eeb6601 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -36,6 +36,9 @@
 		serial0 = &scif2;
 		serial1 = &hscif1;
 		ethernet0 = &avb;
+		mmc0 = &sdhi2;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi3;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index e9ed2597f1c2..61bd4df09df0 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -16,6 +16,7 @@
 	aliases {
 		serial1 = &hscif0;
 		serial2 = &scif1;
+		mmc2 = &sdhi3;
 	};
 
 	clksndsel: clksndsel {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/ulcb.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/ulcb.dtsi
index a04eae55dd6c..3d88e95c65a5 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -23,6 +23,8 @@
 	aliases {
 		serial0 = &scif2;
 		ethernet0 = &avb;
+		mmc0 = &sdhi2;
+		mmc1 = &sdhi0;
 	};
 
 	chosen {
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index a87b8a678719..8f2c1c1e2c64 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -734,7 +734,7 @@
 			clocks = <&sys_clk 6>;
 			reset-names = "ether";
 			resets = <&sys_rst 6>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 0>;
 
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 0e52dadf54b3..be97da132258 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -564,7 +564,7 @@
 			clocks = <&sys_clk 6>;
 			reset-names = "ether";
 			resets = <&sys_rst 6>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 0>;
 
@@ -585,7 +585,7 @@
 			clocks = <&sys_clk 7>;
 			reset-names = "ether";
 			resets = <&sys_rst 7>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 1>;
 
diff --git linux-libre-5.12-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi linux-libre-5.12.4-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 8c84dafb7125..f1e7da3dfa27 100644
--- linux-libre-5.12-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ linux-libre-5.12.4-gnu/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1042,13 +1042,16 @@
 		assigned-clocks = <&k3_clks 91 1>;
 		assigned-clock-parents = <&k3_clks 91 2>;
 		bus-width = <8>;
-		mmc-hs400-1_8v;
+		mmc-hs200-1_8v;
 		mmc-ddr-1_8v;
 		ti,otap-del-sel-legacy = <0xf>;
 		ti,otap-del-sel-mmc-hs = <0xf>;
 		ti,otap-del-sel-ddr52 = <0x5>;
 		ti,otap-del-sel-hs200 = <0x6>;
 		ti,otap-del-sel-hs400 = <0x0>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		ti,trm-icp = <0x8>;
 		ti,strobe-sel = <0x77>;
 		dma-coherent;
@@ -1069,9 +1072,15 @@
 		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,trm-icp = <0x8>;
 		ti,clkbuf-sel = <0x7>;
 		dma-coherent;
+		sdhci-caps-mask = <0x2 0x0>;
 	};
 
 	main_sdhci2: mmc@4f98000 {
@@ -1089,9 +1098,15 @@
 		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
+		ti,itap-del-sel-ddr50 = <0x2>;
 		ti,trm-icp = <0x8>;
 		ti,clkbuf-sel = <0x7>;
 		dma-coherent;
+		sdhci-caps-mask = <0x2 0x0>;
 	};
 
 	usbss0: cdns-usb@4104000 {
diff --git linux-libre-5.12-gnu/arch/arm64/crypto/aes-modes.S linux-libre-5.12.4-gnu/arch/arm64/crypto/aes-modes.S
index bbdb5470