diff --git linux-libre-5.10-gnu1/.gitignore linux-libre-5.10.108-gnu1/.gitignore
index d01cda8e1177..67d2f3503128 100644
--- linux-libre-5.10-gnu1/.gitignore
+++ linux-libre-5.10.108-gnu1/.gitignore
@@ -55,6 +55,7 @@ modules.order
 /tags
 /TAGS
 /linux
+/modules-only.symvers
 /vmlinux
 /vmlinux.32
 /vmlinux.symvers
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/evm linux-libre-5.10.108-gnu1/Documentation/ABI/testing/evm
index 3c477ba48a31..2243b72e4110 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/evm
+++ linux-libre-5.10.108-gnu1/Documentation/ABI/testing/evm
@@ -49,8 +49,30 @@ Description:
 		modification of EVM-protected metadata and
 		disable all further modification of policy
 
-		Note that once a key has been loaded, it will no longer be
-		possible to enable metadata modification.
+		Echoing a value is additive, the new value is added to the
+		existing initialization flags.
+
+		For example, after::
+
+		  echo 2 ><securityfs>/evm
+
+		another echo can be performed::
+
+		  echo 1 ><securityfs>/evm
+
+		and the resulting value will be 3.
+
+		Note that once an HMAC key has been loaded, it will no longer
+		be possible to enable metadata modification. Signaling that an
+		HMAC key has been loaded will clear the corresponding flag.
+		For example, if the current value is 6 (2 and 4 set)::
+
+		  echo 1 ><securityfs>/evm
+
+		will set the new value to 3 (4 cleared).
+
+		Loading an HMAC key is the only way to disable metadata
+		modification.
 
 		Until key loading has been signaled EVM can not create
 		or validate the 'security.evm' xattr, but returns
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 linux-libre-5.10.108-gnu1/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
deleted file mode 100644
index 73498ff666bd..000000000000
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32
+++ /dev/null
@@ -1,62 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Reading returns the current preset value. Writing sets the
-		preset value. Encoder counts continuously from 0 to preset
-		value, depending on direction (up/down).
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Reading returns the list possible quadrature modes.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Configure the device counter quadrature modes:
-
-		- non-quadrature:
-			Encoder IN1 input servers as the count input (up
-			direction).
-
-		- quadrature:
-			Encoder IN1 and IN2 inputs are mixed to get direction
-			and count.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count_polarity_available
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Reading returns the list possible active edges.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_count0_polarity
-KernelVersion:	4.13
-Contact:	fabrice.gasnier@st.com
-Description:
-		Configure the device encoder/counter active edge:
-
-		- rising-edge
-		- falling-edge
-		- both-edges
-
-		In non-quadrature mode, device counts up on active edge.
-
-		In quadrature mode, encoder counting scenarios are as follows:
-
-		+---------+----------+--------------------+--------------------+
-		| Active  | Level on |      IN1 signal    |     IN2 signal     |
-		| edge    | opposite +----------+---------+----------+---------+
-		|         | signal   |  Rising  | Falling |  Rising  | Falling |
-		+---------+----------+----------+---------+----------+---------+
-		| Rising  | High ->  |   Down   |    -    |   Up     |    -    |
-		| edge    | Low  ->  |   Up     |    -    |   Down   |    -    |
-		+---------+----------+----------+---------+----------+---------+
-		| Falling | High ->  |    -     |   Up    |    -     |   Down  |
-		| edge    | Low  ->  |    -     |   Down  |    -     |   Up    |
-		+---------+----------+----------+---------+----------+---------+
-		| Both    | High ->  |   Down   |   Up    |   Up     |   Down  |
-		| edges   | Low  ->  |   Up     |   Down  |   Down   |   Up    |
-		+---------+----------+----------+---------+----------+---------+
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-papr-pmem linux-libre-5.10.108-gnu1/Documentation/ABI/testing/sysfs-bus-papr-pmem
index 8316c33862a0..0aa02bf2bde5 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-bus-papr-pmem
+++ linux-libre-5.10.108-gnu1/Documentation/ABI/testing/sysfs-bus-papr-pmem
@@ -39,9 +39,11 @@ KernelVersion:	v5.9
 Contact:	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, linux-nvdimm@lists.01.org,
 Description:
 		(RO) Report various performance stats related to papr-scm NVDIMM
-		device.  Each stat is reported on a new line with each line
-		composed of a stat-identifier followed by it value. Below are
-		currently known dimm performance stats which are reported:
+		device. This attribute is only available for NVDIMM devices
+		that support reporting NVDIMM performance stats. Each stat is
+		reported on a new line with each line composed of a
+		stat-identifier followed by it value. Below are currently known
+		dimm performance stats which are reported:
 
 		* "CtlResCt" : Controller Reset Count
 		* "CtlResTm" : Controller Reset Elapsed Time
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-class-devlink linux-libre-5.10.108-gnu1/Documentation/ABI/testing/sysfs-class-devlink
index b662f747c83e..8a21ce515f61 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-class-devlink
+++ linux-libre-5.10.108-gnu1/Documentation/ABI/testing/sysfs-class-devlink
@@ -5,8 +5,8 @@ Description:
 		Provide a place in sysfs for the device link objects in the
 		kernel at any given time.  The name of a device link directory,
 		denoted as ... above, is of the form <supplier>--<consumer>
-		where <supplier> is the supplier device name and <consumer> is
-		the consumer device name.
+		where <supplier> is the supplier bus:device name and <consumer>
+		is the consumer bus:device name.
 
 What:		/sys/class/devlink/.../auto_remove_on
 Date:		May 2020
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-consumer linux-libre-5.10.108-gnu1/Documentation/ABI/testing/sysfs-devices-consumer
index 1f06d74d1c3c..0809fda092e6 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-consumer
+++ linux-libre-5.10.108-gnu1/Documentation/ABI/testing/sysfs-devices-consumer
@@ -4,5 +4,6 @@ Contact:	Saravana Kannan <saravanak@google.com>
 Description:
 		The /sys/devices/.../consumer:<consumer> are symlinks to device
 		links where this device is the supplier. <consumer> denotes the
-		name of the consumer in that device link. There can be zero or
-		more of these symlinks for a given device.
+		name of the consumer in that device link and is of the form
+		bus:device name. There can be zero or more of these symlinks
+		for a given device.
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-memory linux-libre-5.10.108-gnu1/Documentation/ABI/testing/sysfs-devices-memory
index 2da2b1fba2c1..16a727a611b1 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-memory
+++ linux-libre-5.10.108-gnu1/Documentation/ABI/testing/sysfs-devices-memory
@@ -26,8 +26,9 @@ Date:		September 2008
 Contact:	Badari Pulavarty <pbadari@us.ibm.com>
 Description:
 		The file /sys/devices/system/memory/memoryX/phys_device
-		is read-only and is designed to show the name of physical
-		memory device.  Implementation is currently incomplete.
+		is read-only;  it is a legacy interface only ever used on s390x
+		to expose the covered storage increment.
+Users:		Legacy s390-tools lsmem/chmem
 
 What:		/sys/devices/system/memory/memoryX/phys_index
 Date:		September 2008
diff --git linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-supplier linux-libre-5.10.108-gnu1/Documentation/ABI/testing/sysfs-devices-supplier
index a919e0db5e90..207f5972e98d 100644
--- linux-libre-5.10-gnu1/Documentation/ABI/testing/sysfs-devices-supplier
+++ linux-libre-5.10.108-gnu1/Documentation/ABI/testing/sysfs-devices-supplier
@@ -4,5 +4,6 @@ Contact:	Saravana Kannan <saravanak@google.com>
 Description:
 		The /sys/devices/.../supplier:<supplier> are symlinks to device
 		links where this device is the consumer. <supplier> denotes the
-		name of the supplier in that device link. There can be zero or
-		more of these symlinks for a given device.
+		name of the supplier in that device link and is of the form
+		bus:device name. There can be zero or more of these symlinks
+		for a given device.
diff --git linux-libre-5.10-gnu1/Documentation/accounting/psi.rst linux-libre-5.10.108-gnu1/Documentation/accounting/psi.rst
index f2b3439edcc2..860fe651d645 100644
--- linux-libre-5.10-gnu1/Documentation/accounting/psi.rst
+++ linux-libre-5.10.108-gnu1/Documentation/accounting/psi.rst
@@ -92,7 +92,8 @@ Triggers can be set on more than one psi metric and more than one trigger
 for the same psi metric can be specified. However for each trigger a separate
 file descriptor is required to be able to poll it separately from others,
 therefore for each trigger a separate open() syscall should be made even
-when opening the same psi interface file.
+when opening the same psi interface file. Write operations to a file descriptor
+with an already existing psi trigger will fail with EBUSY.
 
 Monitors activate only when system enters stall state for the monitored
 psi metric and deactivates upon exit from the stall state. While system is
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst linux-libre-5.10.108-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst
index 3ab4f7756a6e..bf878c879afb 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst
+++ linux-libre-5.10.108-gnu1/Documentation/admin-guide/device-mapper/dm-integrity.rst
@@ -177,14 +177,20 @@ bitmap_flush_interval:number
 	The bitmap flush interval in milliseconds. The metadata buffers
 	are synchronized when this interval expires.
 
+allow_discards
+	Allow block discard requests (a.k.a. TRIM) for the integrity device.
+	Discards are only allowed to devices using internal hash.
+
 fix_padding
 	Use a smaller padding of the tag area that is more
 	space-efficient. If this option is not present, large padding is
 	used - that is for compatibility with older kernels.
 
-allow_discards
-	Allow block discard requests (a.k.a. TRIM) for the integrity device.
-	Discards are only allowed to devices using internal hash.
+legacy_recalculate
+	Allow recalculating of volumes with HMAC keys. This is disabled by
+	default for security reasons - an attacker could modify the volume,
+	set recalc_sector to zero, and the kernel would not detect the
+	modification.
 
 The journal mode (D/J), buffer_sectors, journal_watermark, commit_time and
 allow_discards can be changed when reloading the target (load an inactive
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/devices.txt linux-libre-5.10.108-gnu1/Documentation/admin-guide/devices.txt
index 63fd4e6a014b..8b738855e1c5 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/devices.txt
+++ linux-libre-5.10.108-gnu1/Documentation/admin-guide/devices.txt
@@ -3003,10 +3003,10 @@
 		65 = /dev/infiniband/issm1     Second InfiniBand IsSM device
 		  ...
 		127 = /dev/infiniband/issm63    63rd InfiniBand IsSM device
-		128 = /dev/infiniband/uverbs0   First InfiniBand verbs device
-		129 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
+		192 = /dev/infiniband/uverbs0   First InfiniBand verbs device
+		193 = /dev/infiniband/uverbs1   Second InfiniBand verbs device
 		  ...
-		159 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
+		223 = /dev/infiniband/uverbs31  31st InfiniBand verbs device
 
  232 char	Biometric Devices
 		0 = /dev/biometric/sensor0/fingerprint	first fingerprint sensor on first device
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst linux-libre-5.10.108-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst
index e05e581af5cf..6bd97cd50d62 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst
+++ linux-libre-5.10.108-gnu1/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -60,8 +60,8 @@ privileged data touched during the speculative execution.
 Spectre variant 1 attacks take advantage of speculative execution of
 conditional branches, while Spectre variant 2 attacks use speculative
 execution of indirect branches to leak privileged memory.
-See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[7] <spec_ref7>`
-:ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
+See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[6] <spec_ref6>`
+:ref:`[7] <spec_ref7>` :ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
 
 Spectre variant 1 (Bounds Check Bypass)
 ---------------------------------------
@@ -131,6 +131,19 @@ steer its indirect branch speculations to gadget code, and measure the
 speculative execution's side effects left in level 1 cache to infer the
 victim's data.
 
+Yet another variant 2 attack vector is for the attacker to poison the
+Branch History Buffer (BHB) to speculatively steer an indirect branch
+to a specific Branch Target Buffer (BTB) entry, even if the entry isn't
+associated with the source address of the indirect branch. Specifically,
+the BHB might be shared across privilege levels even in the presence of
+Enhanced IBRS.
+
+Currently the only known real-world BHB attack vector is via
+unprivileged eBPF. Therefore, it's highly recommended to not enable
+unprivileged eBPF, especially when eIBRS is used (without retpolines).
+For a full mitigation against BHB attacks, it's recommended to use
+retpolines (or eIBRS combined with retpolines).
+
 Attack scenarios
 ----------------
 
@@ -364,13 +377,15 @@ The possible values in this file are:
 
   - Kernel status:
 
-  ====================================  =================================
-  'Not affected'                        The processor is not vulnerable
-  'Vulnerable'                          Vulnerable, no mitigation
-  'Mitigation: Full generic retpoline'  Software-focused mitigation
-  'Mitigation: Full AMD retpoline'      AMD-specific software mitigation
-  'Mitigation: Enhanced IBRS'           Hardware-focused mitigation
-  ====================================  =================================
+  ========================================  =================================
+  'Not affected'                            The processor is not vulnerable
+  'Mitigation: None'                        Vulnerable, no mitigation
+  'Mitigation: Retpolines'                  Use Retpoline thunks
+  'Mitigation: LFENCE'                      Use LFENCE instructions
+  'Mitigation: Enhanced IBRS'               Hardware-focused mitigation
+  'Mitigation: Enhanced IBRS + Retpolines'  Hardware-focused + Retpolines
+  'Mitigation: Enhanced IBRS + LFENCE'      Hardware-focused + LFENCE
+  ========================================  =================================
 
   - Firmware status: Show if Indirect Branch Restricted Speculation (IBRS) is
     used to protect against Spectre variant 2 attacks when calling firmware (x86 only).
@@ -468,7 +483,7 @@ Spectre variant 2
    before invoking any firmware code to prevent Spectre variant 2 exploits
    using the firmware.
 
-   Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+   Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y
    and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
    attacks on the kernel generally more difficult.
 
@@ -584,12 +599,13 @@ kernel command line.
 
 		Specific mitigations can also be selected manually:
 
-		retpoline
-					replace indirect branches
-		retpoline,generic
-					google's original retpoline
-		retpoline,amd
-					AMD-specific minimal thunk
+                retpoline               auto pick between generic,lfence
+                retpoline,generic       Retpolines
+                retpoline,lfence        LFENCE; indirect branch
+                retpoline,amd           alias for retpoline,lfence
+                eibrs                   enhanced IBRS
+                eibrs,retpoline         enhanced IBRS + Retpolines
+                eibrs,lfence            enhanced IBRS + LFENCE
 
 		Not specifying this option is equivalent to
 		spectre_v2=auto.
@@ -730,7 +746,7 @@ AMD white papers:
 
 .. _spec_ref6:
 
-[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/90343-B_SoftwareTechniquesforManagingSpeculation_WP_7-18Update_FNL.pdf>`_.
+[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/Managing-Speculation-on-AMD-Processors.pdf>`_.
 
 ARM white papers:
 
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/kernel-parameters.txt linux-libre-5.10.108-gnu1/Documentation/admin-guide/kernel-parameters.txt
index 44fde25bb221..611172f68bb5 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/kernel-parameters.txt
+++ linux-libre-5.10.108-gnu1/Documentation/admin-guide/kernel-parameters.txt
@@ -577,6 +577,12 @@
 			loops can be debugged more effectively on production
 			systems.
 
+	clocksource.max_cswd_read_retries= [KNL]
+			Number of clocksource_watchdog() retries due to
+			external delays before the clock will be marked
+			unstable.  Defaults to three retries, that is,
+			four attempts to read the clock under test.
+
 	clearcpuid=BITNUM[,BITNUM...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
@@ -1611,6 +1617,8 @@
 			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset	[HW] Reset device connected to KBD port
+	i8042.probe_defer
+			[HW] Allow deferred probing upon i8042 probe errors
 
 	i810=		[HW,DRM]
 
@@ -2288,8 +2296,12 @@
 			Default is 1 (enabled)
 
 	kvm-intel.emulate_invalid_guest_state=
-			[KVM,Intel] Enable emulation of invalid guest states
-			Default is 0 (disabled)
+			[KVM,Intel] Disable emulation of invalid guest state.
+			Ignored if kvm-intel.enable_unrestricted_guest=1, as
+			guest state is never invalid for unrestricted guests.
+			This param doesn't apply to nested guests (L2), as KVM
+			never emulates invalid L2 guest state.
+			Default is 1 (enabled)
 
 	kvm-intel.flexpriority=
 			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
@@ -4945,8 +4957,12 @@
 			Specific mitigations can also be selected manually:
 
 			retpoline	  - replace indirect branches
-			retpoline,generic - google's original retpoline
-			retpoline,amd     - AMD-specific minimal thunk
+			retpoline,generic - Retpolines
+			retpoline,lfence  - LFENCE; indirect branch
+			retpoline,amd     - alias for retpoline,lfence
+			eibrs		  - enhanced IBRS
+			eibrs,retpoline   - enhanced IBRS + Retpolines
+			eibrs,lfence      - enhanced IBRS + LFENCE
 
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
@@ -5663,6 +5679,7 @@
 					device);
 				j = NO_REPORT_LUNS (don't use report luns
 					command, uas only);
+				k = NO_SAME (do not use WRITE_SAME, uas only)
 				l = NOT_LOCKABLE (don't try to lock and
 					unlock ejectable media, not on uas);
 				m = MAX_SECTORS_64 (don't transfer more
@@ -5964,6 +5981,10 @@
 			This option is obsoleted by the "nopv" option, which
 			has equivalent effect for XEN platform.
 
+	xen_no_vector_callback
+			[KNL,X86,XEN] Disable the vector callback for Xen
+			event channel interrupts.
+
 	xen_scrub_pages=	[XEN]
 			Boolean option to control scrubbing pages before giving them back
 			to Xen, for use by other domains. Can be also changed at runtime
@@ -5977,6 +5998,13 @@
 			improve timer resolution at the expense of processing
 			more timer interrupts.
 
+	xen.balloon_boot_timeout= [XEN]
+			The time (in seconds) to wait before giving up to boot
+			in case initial ballooning fails to free enough memory.
+			Applies only when running as HVM or PVH guest and
+			started with less memory configured than allowed at
+			max. Default is 180.
+
 	xen.event_eoi_delay=	[XEN]
 			How long to delay EOI handling in case of event
 			storms (jiffies). Default is 10.
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/mm/memory-hotplug.rst linux-libre-5.10.108-gnu1/Documentation/admin-guide/mm/memory-hotplug.rst
index 5c4432c96c4b..245739f55ac7 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/mm/memory-hotplug.rst
+++ linux-libre-5.10.108-gnu1/Documentation/admin-guide/mm/memory-hotplug.rst
@@ -160,8 +160,8 @@ Under each memory block, you can see 5 files:
 
                     "online_movable", "online", "offline" command
                     which will be performed on all sections in the block.
-``phys_device``     read-only: designed to show the name of physical memory
-                    device.  This is not well implemented now.
+``phys_device``	    read-only: legacy interface only ever used on s390x to
+		    expose the covered storage increment.
 ``removable``       read-only: contains an integer value indicating
                     whether the memory block is removable or not
                     removable.  A value of 1 indicates that the memory
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/perf/arm-cmn.rst linux-libre-5.10.108-gnu1/Documentation/admin-guide/perf/arm-cmn.rst
index 0e4809346014..796e25b7027b 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/perf/arm-cmn.rst
+++ linux-libre-5.10.108-gnu1/Documentation/admin-guide/perf/arm-cmn.rst
@@ -17,7 +17,7 @@ PMU events
 ----------
 
 The PMU driver registers a single PMU device for the whole interconnect,
-see /sys/bus/event_source/devices/arm_cmn. Multi-chip systems may link
+see /sys/bus/event_source/devices/arm_cmn_0. Multi-chip systems may link
 more than one CMN together via external CCIX links - in this situation,
 each mesh counts its own events entirely independently, and additional
 PMU devices will be named arm_cmn_{1..n}.
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/kernel.rst linux-libre-5.10.108-gnu1/Documentation/admin-guide/sysctl/kernel.rst
index d4b32cc32bb7..7d5e8a67c775 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/kernel.rst
+++ linux-libre-5.10.108-gnu1/Documentation/admin-guide/sysctl/kernel.rst
@@ -1457,11 +1457,22 @@ unprivileged_bpf_disabled
 =========================
 
 Writing 1 to this entry will disable unprivileged calls to ``bpf()``;
-once disabled, calling ``bpf()`` without ``CAP_SYS_ADMIN`` will return
-``-EPERM``.
+once disabled, calling ``bpf()`` without ``CAP_SYS_ADMIN`` or ``CAP_BPF``
+will return ``-EPERM``. Once set to 1, this can't be cleared from the
+running kernel anymore.
 
-Once set, this can't be cleared.
+Writing 2 to this entry will also disable unprivileged calls to ``bpf()``,
+however, an admin can still change this setting later on, if needed, by
+writing 0 or 1 to this entry.
 
+If ``BPF_UNPRIV_DEFAULT_OFF`` is enabled in the kernel config, then this
+entry will default to 2 instead of 0.
+
+= =============================================================
+0 Unprivileged calls to ``bpf()`` are enabled
+1 Unprivileged calls to ``bpf()`` are disabled without recovery
+2 Unprivileged calls to ``bpf()`` are disabled
+= =============================================================
 
 watchdog
 ========
diff --git linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/vm.rst linux-libre-5.10.108-gnu1/Documentation/admin-guide/sysctl/vm.rst
index f455fa00c00f..06027c6a233a 100644
--- linux-libre-5.10-gnu1/Documentation/admin-guide/sysctl/vm.rst
+++ linux-libre-5.10.108-gnu1/Documentation/admin-guide/sysctl/vm.rst
@@ -978,11 +978,11 @@ that benefit from having their data cached, zone_reclaim_mode should be
 left disabled as the caching effect is likely to be more important than
 data locality.
 
-zone_reclaim may be enabled if it's known that the workload is partitioned
-such that each partition fits within a NUMA node and that accessing remote
-memory would cause a measurable performance reduction.  The page allocator
-will then reclaim easily reusable pages (those page cache pages that are
-currently not used) before allocating off node pages.
+Consider enabling one or more zone_reclaim mode bits if it's known that the
+workload is partitioned such that each partition fits within a NUMA node
+and that accessing remote memory would cause a measurable performance
+reduction.  The page allocator will take additional actions before
+allocating off node pages.
 
 Allowing zone reclaim to write out pages stops processes that are
 writing large amounts of data from dirtying pages on other nodes. Zone
diff --git linux-libre-5.10-gnu1/Documentation/arm/memory.rst linux-libre-5.10.108-gnu1/Documentation/arm/memory.rst
index 0521b4ce5c96..34bb23c44a71 100644
--- linux-libre-5.10-gnu1/Documentation/arm/memory.rst
+++ linux-libre-5.10.108-gnu1/Documentation/arm/memory.rst
@@ -45,9 +45,14 @@ fffe8000	fffeffff	DTCM mapping area for platforms with
 fffe0000	fffe7fff	ITCM mapping area for platforms with
 				ITCM mounted inside the CPU.
 
-ffc00000	ffefffff	Fixmap mapping region.  Addresses provided
+ffc80000	ffefffff	Fixmap mapping region.  Addresses provided
 				by fix_to_virt() will be located here.
 
+ffc00000	ffc7ffff	Guard region
+
+ff800000	ffbfffff	Permanent, fixed read-only mapping of the
+				firmware provided DT blob
+
 fee00000	feffffff	Mapping of PCI I/O space. This is a static
 				mapping within the vmalloc space.
 
diff --git linux-libre-5.10-gnu1/Documentation/arm64/cpu-feature-registers.rst linux-libre-5.10.108-gnu1/Documentation/arm64/cpu-feature-registers.rst
index 328e0c454fbd..749ae970c319 100644
--- linux-libre-5.10-gnu1/Documentation/arm64/cpu-feature-registers.rst
+++ linux-libre-5.10.108-gnu1/Documentation/arm64/cpu-feature-registers.rst
@@ -235,7 +235,15 @@ infrastructure:
      | DPB                          | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
-  6) ID_AA64MMFR2_EL1 - Memory model feature register 2
+  6) ID_AA64MMFR0_EL1 - Memory model feature register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | ECV                          | [63-60] |    y    |
+     +------------------------------+---------+---------+
+
+  7) ID_AA64MMFR2_EL1 - Memory model feature register 2
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -243,7 +251,7 @@ infrastructure:
      | AT                           | [35-32] |    y    |
      +------------------------------+---------+---------+
 
-  7) ID_AA64ZFR0_EL1 - SVE feature ID register 0
+  8) ID_AA64ZFR0_EL1 - SVE feature ID register 0
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -267,6 +275,23 @@ infrastructure:
      | SVEVer                       | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
+  8) ID_AA64MMFR1_EL1 - Memory model feature register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | AFP                          | [47-44] |    y    |
+     +------------------------------+---------+---------+
+
+  9) ID_AA64ISAR2_EL1 - Instruction set attribute register 2
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | RPRES                        | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
+
 Appendix I: Example
 -------------------
 
diff --git linux-libre-5.10-gnu1/Documentation/arm64/elf_hwcaps.rst linux-libre-5.10.108-gnu1/Documentation/arm64/elf_hwcaps.rst
index bbd9cf54db6c..e88d245d426d 100644
--- linux-libre-5.10-gnu1/Documentation/arm64/elf_hwcaps.rst
+++ linux-libre-5.10.108-gnu1/Documentation/arm64/elf_hwcaps.rst
@@ -245,6 +245,18 @@ HWCAP2_MTE
     Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described
     by Documentation/arm64/memory-tagging-extension.rst.
 
+HWCAP2_ECV
+
+    Functionality implied by ID_AA64MMFR0_EL1.ECV == 0b0001.
+
+HWCAP2_AFP
+
+    Functionality implied by ID_AA64MFR1_EL1.AFP == 0b0001.
+
+HWCAP2_RPRES
+
+    Functionality implied by ID_AA64ISAR2_EL1.RPRES == 0b0001.
+
 4. Unused AT_HWCAP bits
 -----------------------
 
diff --git linux-libre-5.10-gnu1/Documentation/arm64/tagged-address-abi.rst linux-libre-5.10.108-gnu1/Documentation/arm64/tagged-address-abi.rst
index 4a9d9c794ee5..7d255249094d 100644
--- linux-libre-5.10-gnu1/Documentation/arm64/tagged-address-abi.rst
+++ linux-libre-5.10.108-gnu1/Documentation/arm64/tagged-address-abi.rst
@@ -45,14 +45,24 @@ how the user addresses are used by the kernel:
 
 1. User addresses not accessed by the kernel but used for address space
    management (e.g. ``mprotect()``, ``madvise()``). The use of valid
-   tagged pointers in this context is allowed with the exception of
-   ``brk()``, ``mmap()`` and the ``new_address`` argument to
-   ``mremap()`` as these have the potential to alias with existing
-   user addresses.
-
-   NOTE: This behaviour changed in v5.6 and so some earlier kernels may
-   incorrectly accept valid tagged pointers for the ``brk()``,
-   ``mmap()`` and ``mremap()`` system calls.
+   tagged pointers in this context is allowed with these exceptions:
+
+   - ``brk()``, ``mmap()`` and the ``new_address`` argument to
+     ``mremap()`` as these have the potential to alias with existing
+      user addresses.
+
+     NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for the ``brk()``,
+     ``mmap()`` and ``mremap()`` system calls.
+
+   - The ``range.start``, ``start`` and ``dst`` arguments to the
+     ``UFFDIO_*`` ``ioctl()``s used on a file descriptor obtained from
+     ``userfaultfd()``, as fault addresses subsequently obtained by reading
+     the file descriptor will be untagged, which may otherwise confuse
+     tag-unaware programs.
+
+     NOTE: This behaviour changed in v5.14 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for this system call.
 
 2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
    relaxation is disabled by default and the application thread needs to
diff --git linux-libre-5.10-gnu1/Documentation/asm-annotations.rst linux-libre-5.10.108-gnu1/Documentation/asm-annotations.rst
index 32ea57483378..76424e0431f4 100644
--- linux-libre-5.10-gnu1/Documentation/asm-annotations.rst
+++ linux-libre-5.10.108-gnu1/Documentation/asm-annotations.rst
@@ -100,6 +100,11 @@ Instruction Macros
 ~~~~~~~~~~~~~~~~~~
 This section covers ``SYM_FUNC_*`` and ``SYM_CODE_*`` enumerated above.
 
+``objtool`` requires that all code must be contained in an ELF symbol. Symbol
+names that have a ``.L`` prefix do not emit symbol table entries. ``.L``
+prefixed symbols can be used within a code region, but should be avoided for
+denoting a range of code via ``SYM_*_START/END`` annotations.
+
 * ``SYM_FUNC_START`` and ``SYM_FUNC_START_LOCAL`` are supposed to be **the
   most frequent markings**. They are used for functions with standard calling
   conventions -- global and local. Like in C, they both align the functions to
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/omap/omap.txt linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c..fa8b31660cad 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml
index 767e86354c8e..2c6911c775c8 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -54,7 +54,7 @@ properties:
           - const: toradex,apalis_t30
           - const: nvidia,tegra30
       - items:
-          - const: toradex,apalis_t30-eval-v1.1
+          - const: toradex,apalis_t30-v1.1-eval
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30-v1.1
           - const: toradex,apalis_t30
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index 0da42ab8fd3a..8a67bb889f18 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -10,6 +10,9 @@ title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
 maintainers:
   - Neil Armstrong <narmstrong@baylibre.com>
 
+allOf:
+  - $ref: /schemas/sound/name-prefix.yaml#
+
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
   - A Synopsys DesignWare HDMI Controller IP
@@ -99,6 +102,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - compatible
   - reg
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index a8d202c9d004..b8cb1b4dae1f 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -78,6 +78,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   power-domains:
     maxItems: 1
     description: phandle to the associated power domain
@@ -106,6 +110,7 @@ required:
   - port@1
   - "#address-cells"
   - "#size-cells"
+  - amlogic,canvas
 
 additionalProperties: false
 
@@ -118,6 +123,7 @@ examples:
         interrupts = <3>;
         #address-cells = <1>;
         #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
 
         /* CVBS VDAC output port */
         port@0 {
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/bridge/sii902x.txt linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/display/bridge/sii902x.txt
index 0d1db3f9da84..02c21b584741 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -8,6 +8,8 @@ Optional properties:
 	- interrupts: describe the interrupt line used to inform the host
 	  about hotplug events.
 	- reset-gpios: OF device-tree gpio specification for RST_N pin.
+	- iovcc-supply: I/O Supply Voltage (1.8V or 3.3V)
+	- cvcc12-supply: Digital Core Supply Voltage (1.2V)
 
 	HDMI audio properties:
 	- #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin
@@ -54,6 +56,8 @@ Example:
 		compatible = "sil,sii9022";
 		reg = <0x39>;
 		reset-gpios = <&pioA 1 0>;
+		iovcc-supply = <&v3v3_hdmi>;
+		cvcc12-supply = <&v1v2_hdmi>;
 
 		#sound-dai-cells = <0>;
 		sil,i2s-data-lanes = < 0 1 2 >;
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
index f8622bd0f61e..f0e0345da498 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -18,7 +18,7 @@ properties:
     const: ti,sn65dsi86
 
   reg:
-    const: 0x2d
+    enum: [ 0x2c, 0x2d ]
 
   enable-gpios:
     maxItems: 1
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/i2c/i2c-at91.txt linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index 96c914e048f5..2015f50aed0f 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -73,7 +73,7 @@ i2c0: i2c@f8034600 {
 	pinctrl-0 = <&pinctrl_i2c0>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
 	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	wm8731: wm8731@1a {
 		compatible = "wm8731";
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/media/renesas,vin.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/media/renesas,vin.yaml
index ad2fe660364b..c69cf8d0cb15 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -278,23 +278,35 @@ required:
   - interrupts
   - clocks
   - power-domains
-  - resets
-
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - renesas,vin-r8a7778
-          - renesas,vin-r8a7779
-          - renesas,rcar-gen2-vin
-then:
-  required:
-    - port
-else:
-  required:
-    - renesas,id
-    - ports
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,vin-r8a7778
+                - renesas,vin-r8a7779
+    then:
+      required:
+        - resets
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,vin-r8a7778
+              - renesas,vin-r8a7779
+              - renesas,rcar-gen2-vin
+    then:
+      required:
+        - port
+    else:
+      required:
+        - renesas,id
+        - ports
 
 additionalProperties: false
 
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 44919d48d241..c459f169a904 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -122,7 +122,7 @@ on various other factors also like;
 	so the device should have enough free bytes available its OOB/Spare
 	area to accommodate ECC for entire page. In general following expression
 	helps in determining if given device can accommodate ECC syndrome:
-	"2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
+	"2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE"
 	where
 		OOBSIZE		number of bytes in OOB/spare area
 		PAGESIZE	number of bytes in main-area of device page
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/btusb.txt linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/net/btusb.txt
index b1ad6ee68e90..c51dd99dc0d3 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/btusb.txt
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/net/btusb.txt
@@ -38,7 +38,7 @@ Following example uses irq pin number 3 of gpio0 for out of band wake-on-bt:
 	compatible = "usb1286,204e";
 	reg = <1>;
 	interrupt-parent = <&gpio0>;
-	interrupt-name = "wakeup";
+	interrupt-names = "wakeup";
 	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
     };
 };
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 0968b40aef1e..e3501bfa22e9 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <10000000>;
-		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+		bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index fdf709817218..9e41dad9ef4d 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -49,7 +49,7 @@ properties:
     description:
       Reference to an nvmem node for the MAC address
 
-  nvmem-cells-names:
+  nvmem-cell-names:
     const: mac-address
 
   phy-connection-type:
@@ -206,6 +206,11 @@ properties:
                 Indicates that full-duplex is used. When absent, half
                 duplex is assumed.
 
+            pause:
+              $ref: /schemas/types.yaml#definitions/flag
+              description:
+                Indicates that pause should be enabled.
+
             asym-pause:
               $ref: /schemas/types.yaml#definitions/flag
               description:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 6dd72faebd89..a054accc20bd 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -91,6 +91,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#definitions/flag
     description:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/renesas,etheravb.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
index 244befb6402a..de9dd574a2f9 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
@@ -163,6 +163,7 @@ allOf:
             enum:
               - renesas,etheravb-r8a774a1
               - renesas,etheravb-r8a774b1
+              - renesas,etheravb-r8a774e1
               - renesas,etheravb-r8a7795
               - renesas,etheravb-r8a7796
               - renesas,etheravb-r8a77961
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
index 38dc56a57760..ecec514b3155 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -43,19 +43,19 @@ group emmc_nb
 
 group pwm0
  - pin 11 (GPIO1-11)
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm1
  - pin 12
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm2
  - pin 13
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pwm3
  - pin 14
- - functions pwm, gpio
+ - functions pwm, led, gpio
 
 group pmic1
  - pin 7
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
index 093edda0c8df..6cd83d920155 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
@@ -13,6 +13,14 @@ common regulator binding documented in:
 
 
 Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+     property is specified, then all the eight voltage values for the
+     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
    units for buck2 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
@@ -25,26 +33,13 @@ Required properties of the main device node (the parent!):
    units for buck4 when changing voltage using gpio dvs. Refer to [1] below
    for additional information.
 
- - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
-   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
- [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
-     property should specify atleast one voltage level (which would be a
-     safe operating voltage).
-
-     If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-     property is specified, then all the eight voltage values for the
-     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties of the main device node (the parent!):
  - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
  - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
  - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
 
 Additional properties required if either of the optional properties are used:
 
- - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
    the possible 8 options selectable by the dvs gpios. The value of this
    property should be between 0 and 7. If not specified or if out of range, the
    default value of this property is set to 0.
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
index efc0198eeb74..5444be7667b6 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
@@ -24,9 +24,9 @@ allOf:
 select:
   properties:
     compatible:
-      items:
-        - enum:
-            - sifive,fu540-c000-ccache
+      contains:
+        enum:
+          - sifive,fu540-c000-ccache
 
   required:
     - compatible
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/rtc/rtc.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/rtc/rtc.yaml
index 8acd2de3de3a..d30dc045aac6 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/rtc/rtc.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/rtc/rtc.yaml
@@ -63,6 +63,11 @@ properties:
     description:
       Enables wake up of host system on alarm.
 
+  reset-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RTC is able to reset the machine.
+
 additionalProperties: true
 
 ...
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/8250.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/serial/8250.yaml
index c1d4c196f005..460cb546c54a 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/8250.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/serial/8250.yaml
@@ -93,11 +93,6 @@ properties:
               - mediatek,mt7622-btif
               - mediatek,mt7623-btif
           - const: mediatek,mtk-btif
-      - items:
-          - enum:
-              - mediatek,mt7622-btif
-              - mediatek,mt7623-btif
-          - const: mediatek,mtk-btif
       - items:
           - const: mrvl,mmp-uart
           - const: intel,xscale-uart
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 06d5f251ec88..51f390e5c276 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -77,7 +77,8 @@ required:
   - interrupts
   - clocks
 
-additionalProperties: false
+additionalProperties:
+  type: object
 
 examples:
   - |
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
index db61f0731a20..2e35aeaa8781 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml
@@ -57,7 +57,7 @@ patternProperties:
           rate
 
       sound-dai:
-        $ref: /schemas/types.yaml#/definitions/phandle
+        $ref: /schemas/types.yaml#/definitions/phandle-array
         description: phandle of the CPU DAI
 
     patternProperties:
@@ -71,7 +71,7 @@ patternProperties:
 
         properties:
           sound-dai:
-            $ref: /schemas/types.yaml#/definitions/phandle
+            $ref: /schemas/types.yaml#/definitions/phandle-array
             description: phandle of the codec DAI
 
         required:
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/thermal/thermal-zones.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 164f71598c59..1b3954aa71c1 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -199,12 +199,11 @@ patternProperties:
 
               contribution:
                 $ref: /schemas/types.yaml#/definitions/uint32
-                minimum: 0
-                maximum: 100
                 description:
-                  The percentage contribution of the cooling devices at the
-                  specific trip temperature referenced in this map
-                  to this thermal zone
+                  The cooling contribution to the thermal zone of the referred
+                  cooling device at the referred trip point. The contribution is
+                  a ratio of the sum of all cooling contributions within a
+                  thermal zone.
 
             required:
               - trip
diff --git linux-libre-5.10-gnu1/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
index 76cb9586ee00..93cd77a6e92c 100644
--- linux-libre-5.10-gnu1/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
+++ linux-libre-5.10.108-gnu1/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml
@@ -39,8 +39,8 @@ properties:
   samsung,syscon-phandle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Phandle to the PMU system controller node (in case of Exynos5250
-      and Exynos5420).
+      Phandle to the PMU system controller node (in case of Exynos5250,
+      Exynos5420 and Exynos7).
 
 required:
   - compatible
@@ -58,6 +58,7 @@ allOf:
             enum:
               - samsung,exynos5250-wdt
               - samsung,exynos5420-wdt
+              - samsung,exynos7-wdt
     then:
       required:
         - samsung,syscon-phandle
diff --git linux-libre-5.10-gnu1/Documentation/dontdiff linux-libre-5.10.108-gnu1/Documentation/dontdiff
index 2554abdc831a..7f99843386ce 100644
--- linux-libre-5.10-gnu1/Documentation/dontdiff
+++ linux-libre-5.10.108-gnu1/Documentation/dontdiff
@@ -178,6 +178,7 @@ mktables
 mktree
 mkutf8data
 modpost
+modules-only.symvers
 modules.builtin
 modules.builtin.modinfo
 modules.nsdeps
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/dmaengine/dmatest.rst linux-libre-5.10.108-gnu1/Documentation/driver-api/dmaengine/dmatest.rst
index ee268d445d38..d2e1d8b58e7d 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/dmaengine/dmatest.rst
+++ linux-libre-5.10.108-gnu1/Documentation/driver-api/dmaengine/dmatest.rst
@@ -143,13 +143,14 @@ Part 5 - Handling channel allocation
 Allocating Channels
 -------------------
 
-Channels are required to be configured prior to starting the test run.
-Attempting to run the test without configuring the channels will fail.
+Channels do not need to be configured prior to starting a test run. Attempting
+to run the test without configuring the channels will result in testing any
+channels that are available.
 
 Example::
 
     % echo 1 > /sys/module/dmatest/parameters/run
-    dmatest: Could not start test, no channels configured
+    dmatest: No channels configured, continue with any
 
 Channels are registered using the "channel" parameter. Channels can be requested by their
 name, once requested, the channel is registered and a pending thread is added to the test list.
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/early-userspace/early_userspace_support.rst linux-libre-5.10.108-gnu1/Documentation/driver-api/early-userspace/early_userspace_support.rst
index 8a58c61932ff..61bdeac1bae5 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/early-userspace/early_userspace_support.rst
+++ linux-libre-5.10.108-gnu1/Documentation/driver-api/early-userspace/early_userspace_support.rst
@@ -69,17 +69,17 @@ early userspace image can be built by an unprivileged user.
 
 As a technical note, when directories and files are specified, the
 entire CONFIG_INITRAMFS_SOURCE is passed to
-usr/gen_initramfs_list.sh.  This means that CONFIG_INITRAMFS_SOURCE
+usr/gen_initramfs.sh.  This means that CONFIG_INITRAMFS_SOURCE
 can really be interpreted as any legal argument to
-gen_initramfs_list.sh.  If a directory is specified as an argument then
+gen_initramfs.sh.  If a directory is specified as an argument then
 the contents are scanned, uid/gid translation is performed, and
 usr/gen_init_cpio file directives are output.  If a directory is
-specified as an argument to usr/gen_initramfs_list.sh then the
+specified as an argument to usr/gen_initramfs.sh then the
 contents of the file are simply copied to the output.  All of the output
 directives from directory scanning and file contents copying are
 processed by usr/gen_init_cpio.
 
-See also 'usr/gen_initramfs_list.sh -h'.
+See also 'usr/gen_initramfs.sh -h'.
 
 Where's this all leading?
 =========================
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/firewire.rst linux-libre-5.10.108-gnu1/Documentation/driver-api/firewire.rst
index 94a2d7f01d99..d3cfa73cbb2b 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/firewire.rst
+++ linux-libre-5.10.108-gnu1/Documentation/driver-api/firewire.rst
@@ -19,7 +19,7 @@ of kernel interfaces is available via exported symbols in `firewire-core` module
 Firewire char device data structures
 ====================================
 
-.. include:: /ABI/stable/firewire-cdev
+.. include:: ../ABI/stable/firewire-cdev
     :literal:
 
 .. kernel-doc:: include/uapi/linux/firewire-cdev.h
@@ -28,7 +28,7 @@ Firewire char device data structures
 Firewire device probing and sysfs interfaces
 ============================================
 
-.. include:: /ABI/stable/sysfs-bus-firewire
+.. include:: ../ABI/stable/sysfs-bus-firewire
     :literal:
 
 .. kernel-doc:: drivers/firewire/core-device.c
diff --git linux-libre-5.10-gnu1/Documentation/driver-api/xilinx/eemi.rst linux-libre-5.10.108-gnu1/Documentation/driver-api/xilinx/eemi.rst
index 9dcbc6f18d75..c1bc47b9000d 100644
--- linux-libre-5.10-gnu1/Documentation/driver-api/xilinx/eemi.rst
+++ linux-libre-5.10.108-gnu1/Documentation/driver-api/xilinx/eemi.rst
@@ -16,35 +16,8 @@ components running across different processing clusters on a chip or
 device to communicate with a power management controller (PMC) on a
 device to issue or respond to power management requests.
 
-EEMI ops is a structure containing all eemi APIs supported by Zynq MPSoC.
-The zynqmp-firmware driver maintain all EEMI APIs in zynqmp_eemi_ops
-structure. Any driver who want to communicate with PMC using EEMI APIs
-can call zynqmp_pm_get_eemi_ops().
-
-Example of EEMI ops::
-
-	/* zynqmp-firmware driver maintain all EEMI APIs */
-	struct zynqmp_eemi_ops {
-		int (*get_api_version)(u32 *version);
-		int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
-	};
-
-	static const struct zynqmp_eemi_ops eemi_ops = {
-		.get_api_version = zynqmp_pm_get_api_version,
-		.query_data = zynqmp_pm_query_data,
-	};
-
-Example of EEMI ops usage::
-
-	static const struct zynqmp_eemi_ops *eemi_ops;
-	u32 ret_payload[PAYLOAD_ARG_CNT];
-	int ret;
-
-	eemi_ops = zynqmp_pm_get_eemi_ops();
-	if (IS_ERR(eemi_ops))
-		return PTR_ERR(eemi_ops);
-
-	ret = eemi_ops->query_data(qdata, ret_payload);
+Any driver who wants to communicate with PMC using EEMI APIs use the
+functions provided for each function.
 
 IOCTL
 ------
diff --git linux-libre-5.10-gnu1/Documentation/fault-injection/provoke-crashes.rst linux-libre-5.10.108-gnu1/Documentation/fault-injection/provoke-crashes.rst
index a20ba5d93932..18de17354206 100644
--- linux-libre-5.10-gnu1/Documentation/fault-injection/provoke-crashes.rst
+++ linux-libre-5.10.108-gnu1/Documentation/fault-injection/provoke-crashes.rst
@@ -29,7 +29,7 @@ recur_count
 cpoint_name
 	Where in the kernel to trigger the action. It can be
 	one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY,
-	FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_DISPATCH_CMD,
+	FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_QUEUE_RQ,
 	IDE_CORE_CP, or DIRECT
 
 cpoint_type
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/f2fs.rst linux-libre-5.10.108-gnu1/Documentation/filesystems/f2fs.rst
index b8ee761c9922..8c0fbdd8ce6f 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/f2fs.rst
+++ linux-libre-5.10.108-gnu1/Documentation/filesystems/f2fs.rst
@@ -688,10 +688,10 @@ users.
 ===================== ======================== ===================
 User                  F2FS                     Block
 ===================== ======================== ===================
-                      META                     WRITE_LIFE_NOT_SET
-                      HOT_NODE                 "
-                      WARM_NODE                "
-                      COLD_NODE                "
+N/A                   META                     WRITE_LIFE_NOT_SET
+N/A                   HOT_NODE                 "
+N/A                   WARM_NODE                "
+N/A                   COLD_NODE                "
 ioctl(COLD)           COLD_DATA                WRITE_LIFE_EXTREME
 extension list        "                        "
 
@@ -717,10 +717,10 @@ WRITE_LIFE_LONG       "                        WRITE_LIFE_LONG
 ===================== ======================== ===================
 User                  F2FS                     Block
 ===================== ======================== ===================
-                      META                     WRITE_LIFE_MEDIUM;
-                      HOT_NODE                 WRITE_LIFE_NOT_SET
-                      WARM_NODE                "
-                      COLD_NODE                WRITE_LIFE_NONE
+N/A                   META                     WRITE_LIFE_MEDIUM;
+N/A                   HOT_NODE                 WRITE_LIFE_NOT_SET
+N/A                   WARM_NODE                "
+N/A                   COLD_NODE                WRITE_LIFE_NONE
 ioctl(COLD)           COLD_DATA                WRITE_LIFE_EXTREME
 extension list        "                        "
 
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/fscrypt.rst linux-libre-5.10.108-gnu1/Documentation/filesystems/fscrypt.rst
index 44b67ebd6e40..936fae06db77 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/fscrypt.rst
+++ linux-libre-5.10.108-gnu1/Documentation/filesystems/fscrypt.rst
@@ -176,11 +176,11 @@ Master Keys
 
 Each encrypted directory tree is protected by a *master key*.  Master
 keys can be up to 64 bytes long, and must be at least as long as the
-greater of the key length needed by the contents and filenames
-encryption modes being used.  For example, if AES-256-XTS is used for
-contents encryption, the master key must be 64 bytes (512 bits).  Note
-that the XTS mode is defined to require a key twice as long as that
-required by the underlying block cipher.
+greater of the security strength of the contents and filenames
+encryption modes being used.  For example, if any AES-256 mode is
+used, the master key must be at least 256 bits, i.e. 32 bytes.  A
+stricter requirement applies if the key is used by a v1 encryption
+policy and AES-256-XTS is used; such keys must be 64 bytes.
 
 To "unlock" an encrypted directory tree, userspace must provide the
 appropriate master key.  There can be any number of master keys, each
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/overlayfs.rst linux-libre-5.10.108-gnu1/Documentation/filesystems/overlayfs.rst
index 580ab9a0fe31..137afeb3f581 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/overlayfs.rst
+++ linux-libre-5.10.108-gnu1/Documentation/filesystems/overlayfs.rst
@@ -575,6 +575,14 @@ without significant effort.
 The advantage of mounting with the "volatile" option is that all forms of
 sync calls to the upper filesystem are omitted.
 
+In order to avoid a giving a false sense of safety, the syncfs (and fsync)
+semantics of volatile mounts are slightly different than that of the rest of
+VFS.  If any writeback error occurs on the upperdir's filesystem after a
+volatile mount takes place, all sync functions will return an error.  Once this
+condition is reached, the filesystem will not recover, and every subsequent sync
+call will return an error, even if the upperdir has not experience a new error
+since the last sync call.
+
 When overlay is mounted with "volatile" option, the directory
 "$workdir/work/incompat/volatile" is created.  During next mount, overlay
 checks for this directory and refuses to mount if present. This is a strong
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/ramfs-rootfs-initramfs.rst linux-libre-5.10.108-gnu1/Documentation/filesystems/ramfs-rootfs-initramfs.rst
index 4598b0d90b60..164960631925 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/ramfs-rootfs-initramfs.rst
+++ linux-libre-5.10.108-gnu1/Documentation/filesystems/ramfs-rootfs-initramfs.rst
@@ -170,7 +170,7 @@ Documentation/driver-api/early-userspace/early_userspace_support.rst for more de
 The kernel does not depend on external cpio tools.  If you specify a
 directory instead of a configuration file, the kernel's build infrastructure
 creates a configuration file from that directory (usr/Makefile calls
-usr/gen_initramfs_list.sh), and proceeds to package up that directory
+usr/gen_initramfs.sh), and proceeds to package up that directory
 using the config file (by feeding it to usr/gen_init_cpio, which is created
 from usr/gen_init_cpio.c).  The kernel's build-time cpio creation code is
 entirely self-contained, and the kernel's boot-time extractor is also
diff --git linux-libre-5.10-gnu1/Documentation/filesystems/seq_file.rst linux-libre-5.10.108-gnu1/Documentation/filesystems/seq_file.rst
index 56856481dc8d..a6726082a7c2 100644
--- linux-libre-5.10-gnu1/Documentation/filesystems/seq_file.rst
+++ linux-libre-5.10.108-gnu1/Documentation/filesystems/seq_file.rst
@@ -217,6 +217,12 @@ between the calls to start() and stop(), so holding a lock during that time
 is a reasonable thing to do. The seq_file code will also avoid taking any
 other locks while the iterator is active.
 
+The iterater value returned by start() or next() is guaranteed to be
+passed to a subsequent next() or stop() call.  This allows resources
+such as locks that were taken to be reliably released.  There is *no*
+guarantee that the iterator will be passed to show(), though in practice
+it often will be.
+
 
 Formatted output
 ================
diff --git linux-libre-5.10-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst linux-libre-5.10.108-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
index 9b17dc77d18c..da0e46496fc4 100644
--- linux-libre-5.10-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
+++ linux-libre-5.10.108-gnu1/Documentation/firmware-guide/acpi/dsd/data-node-references.rst
@@ -5,7 +5,7 @@
 Referencing hierarchical data nodes
 ===================================
 
-:Copyright: |copy| 2018 Intel Corporation
+:Copyright: |copy| 2018, 2021 Intel Corporation
 :Author: Sakari Ailus <sakari.ailus@linux.intel.com>
 
 ACPI in general allows referring to device objects in the tree only.
@@ -52,12 +52,14 @@ the ANOD object which is also the final target node of the reference.
 	    Name (NOD0, Package() {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
+		    Package () { "reg", 0 },
 		    Package () { "random-property", 3 },
 		}
 	    })
 	    Name (NOD1, Package() {
 		ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
 		Package () {
+		    Package () { "reg", 1 },
 		    Package () { "anothernode", "ANOD" },
 		}
 	    })
@@ -74,7 +76,11 @@ the ANOD object which is also the final target node of the reference.
 	    Name (_DSD, Package () {
 		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
 		Package () {
-		    Package () { "reference", ^DEV0, "node@1", "anothernode" },
+		    Package () {
+			"reference", Package () {
+			    ^DEV0, "node@1", "anothernode"
+			}
+		    },
 		}
 	    })
 	}
diff --git linux-libre-5.10-gnu1/Documentation/gpu/todo.rst linux-libre-5.10.108-gnu1/Documentation/gpu/todo.rst
index b0ea17da8ff6..28841609aa4f 100644
--- linux-libre-5.10-gnu1/Documentation/gpu/todo.rst
+++ linux-libre-5.10.108-gnu1/Documentation/gpu/todo.rst
@@ -542,6 +542,27 @@ Some of these date from the very introduction of KMS in 2008 ...
 
 Level: Intermediate
 
+Remove automatic page mapping from dma-buf importing
+----------------------------------------------------
+
+When importing dma-bufs, the dma-buf and PRIME frameworks automatically map
+imported pages into the importer's DMA area. drm_gem_prime_fd_to_handle() and
+drm_gem_prime_handle_to_fd() require that importers call dma_buf_attach()
+even if they never do actual device DMA, but only CPU access through
+dma_buf_vmap(). This is a problem for USB devices, which do not support DMA
+operations.
+
+To fix the issue, automatic page mappings should be removed from the
+buffer-sharing code. Fixing this is a bit more involved, since the import/export
+cache is also tied to &drm_gem_object.import_attach. Meanwhile we paper over
+this problem for USB devices by fishing out the USB host controller device, as
+long as that supports DMA. Otherwise importing can still needlessly fail.
+
+Contact: Thomas Zimmermann <tzimmermann@suse.de>, Daniel Vetter
+
+Level: Advanced
+
+
 Better Testing
 ==============
 
diff --git linux-libre-5.10-gnu1/Documentation/hwmon/lm90.rst linux-libre-5.10.108-gnu1/Documentation/hwmon/lm90.rst
index 3da8c6e06a36..05391fb4042d 100644
--- linux-libre-5.10-gnu1/Documentation/hwmon/lm90.rst
+++ linux-libre-5.10.108-gnu1/Documentation/hwmon/lm90.rst
@@ -265,6 +265,16 @@ Supported chips:
 
 	       https://www.ti.com/litv/pdf/sbos686
 
+  * Texas Instruments TMP461
+
+    Prefix: 'tmp461'
+
+    Addresses scanned: I2C 0x48 through 0x4F
+
+    Datasheet: Publicly available at TI website
+
+	       https://www.ti.com/lit/gpn/tmp461
+
 Author: Jean Delvare <jdelvare@suse.de>
 
 
diff --git linux-libre-5.10-gnu1/Documentation/hwmon/max31790.rst linux-libre-5.10.108-gnu1/Documentation/hwmon/max31790.rst
index f301385d8cef..7b097c3b9b90 100644
--- linux-libre-5.10-gnu1/Documentation/hwmon/max31790.rst
+++ linux-libre-5.10.108-gnu1/Documentation/hwmon/max31790.rst
@@ -38,6 +38,7 @@ Sysfs entries
 fan[1-12]_input    RO  fan tachometer speed in RPM
 fan[1-12]_fault    RO  fan experienced fault
 fan[1-6]_target    RW  desired fan speed in RPM
-pwm[1-6]_enable    RW  regulator mode, 0=disabled, 1=manual mode, 2=rpm mode
-pwm[1-6]           RW  fan target duty cycle (0-255)
+pwm[1-6]_enable    RW  regulator mode, 0=disabled (duty cycle=0%), 1=manual mode, 2=rpm mode
+pwm[1-6]           RW  read: current pwm duty cycle,
+                       write: target pwm duty cycle (0-255)
 ================== === =======================================================
diff --git linux-libre-5.10-gnu1/Documentation/kbuild/gcc-plugins.rst linux-libre-5.10.108-gnu1/Documentation/kbuild/gcc-plugins.rst
index 4b1c10f88e30..3349966f213d 100644
--- linux-libre-5.10-gnu1/Documentation/kbuild/gcc-plugins.rst
+++ linux-libre-5.10.108-gnu1/Documentation/kbuild/gcc-plugins.rst
@@ -11,16 +11,13 @@ compiler [1]_. They are useful for runtime instrumentation and static analysis.
 We can analyse, change and add further code during compilation via
 callbacks [2]_, GIMPLE [3]_, IPA [4]_ and RTL passes [5]_.
 
-The GCC plugin infrastructure of the kernel supports all gcc versions from
-4.5 to 6.0, building out-of-tree modules, cross-compilation and building in a
-separate directory.
-Plugin source files have to be compilable by both a C and a C++ compiler as well
-because gcc versions 4.5 and 4.6 are compiled by a C compiler,
-gcc-4.7 can be compiled by a C or a C++ compiler,
-and versions 4.8+ can only be compiled by a C++ compiler.
+The GCC plugin infrastructure of the kernel supports building out-of-tree
+modules, cross-compilation and building in a separate directory.
+Plugin source files have to be compilable by a C++ compiler.
 
-Currently the GCC plugin infrastructure supports only the x86, arm, arm64 and
-powerpc architectures.
+Currently the GCC plugin infrastructure supports only some architectures.
+Grep "select HAVE_GCC_PLUGINS" to find out which architectures support
+GCC plugins.
 
 This infrastructure was ported from grsecurity [6]_ and PaX [7]_.
 
@@ -47,20 +44,13 @@ Files
 	This is a compatibility header for GCC plugins.
 	It should be always included instead of individual gcc headers.
 
-**$(src)/scripts/gcc-plugin.sh**
-
-	This script checks the availability of the included headers in
-	gcc-common.h and chooses the proper host compiler to build the plugins
-	(gcc-4.7 can be built by either gcc or g++).
-
 **$(src)/scripts/gcc-plugins/gcc-generate-gimple-pass.h,
 $(src)/scripts/gcc-plugins/gcc-generate-ipa-pass.h,
 $(src)/scripts/gcc-plugins/gcc-generate-simple_ipa-pass.h,
 $(src)/scripts/gcc-plugins/gcc-generate-rtl-pass.h**
 
 	These headers automatically generate the registration structures for
-	GIMPLE, SIMPLE_IPA, IPA and RTL passes. They support all gcc versions
-	from 4.5 to 6.0.
+	GIMPLE, SIMPLE_IPA, IPA and RTL passes.
 	They should be preferred to creating the structures by hand.
 
 
@@ -68,21 +58,25 @@ Usage
 =====
 
 You must install the gcc plugin headers for your gcc version,
-e.g., on Ubuntu for gcc-4.9::
+e.g., on Ubuntu for gcc-10::
 
-	apt-get install gcc-4.9-plugin-dev
+	apt-get install gcc-10-plugin-dev
 
 Or on Fedora::
 
 	dnf install gcc-plugin-devel
 
-Enable a GCC plugin based feature in the kernel config::
+Enable the GCC plugin infrastructure and some plugin(s) you want to use
+in the kernel config::
 
-	CONFIG_GCC_PLUGIN_CYC_COMPLEXITY = y
+	CONFIG_GCC_PLUGINS=y
+	CONFIG_GCC_PLUGIN_CYC_COMPLEXITY=y
+	CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y
+	...
 
-To compile only the plugin(s)::
+To compile the minimum tool set including the plugin(s)::
 
-	make gcc-plugins
+	make scripts
 
 or just run the kernel make and compile the whole kernel with
 the cyclomatic complexity GCC plugin.
@@ -91,7 +85,8 @@ the cyclomatic complexity GCC plugin.
 4. How to add a new GCC plugin
 ==============================
 
-The GCC plugins are in $(src)/scripts/gcc-plugins/. You can use a file or a directory
-here. It must be added to $(src)/scripts/gcc-plugins/Makefile,
-$(src)/scripts/Makefile.gcc-plugins and $(src)/arch/Kconfig.
+The GCC plugins are in scripts/gcc-plugins/. You need to put plugin source files
+right under scripts/gcc-plugins/. Creating subdirectories is not supported.
+It must be added to scripts/gcc-plugins/Makefile, scripts/Makefile.gcc-plugins
+and a relevant Kconfig file.
 See the cyc_complexity_plugin.c (CONFIG_GCC_PLUGIN_CYC_COMPLEXITY) GCC plugin.
diff --git linux-libre-5.10-gnu1/Documentation/locking/locktypes.rst linux-libre-5.10.108-gnu1/Documentation/locking/locktypes.rst
index ddada4a53749..4fd7b70fcde1 100644
--- linux-libre-5.10-gnu1/Documentation/locking/locktypes.rst
+++ linux-libre-5.10.108-gnu1/Documentation/locking/locktypes.rst
@@ -439,11 +439,9 @@ preemption. The following substitution works on both kernels::
   spin_lock(&p->lock);
   p->count += this_cpu_read(var2);
 
-On a non-PREEMPT_RT kernel migrate_disable() maps to preempt_disable()
-which makes the above code fully equivalent. On a PREEMPT_RT kernel
 migrate_disable() ensures that the task is pinned on the current CPU which
 in turn guarantees that the per-CPU access to var1 and var2 are staying on
-the same CPU.
+the same CPU while the task remains preemptible.
 
 The migrate_disable() substitution is not valid for the following
 scenario::
@@ -456,9 +454,8 @@ scenario::
     p = this_cpu_ptr(&var1);
     p->val = func2();
 
-While correct on a non-PREEMPT_RT kernel, this breaks on PREEMPT_RT because
-here migrate_disable() does not protect against reentrancy from a
-preempting task. A correct substitution for this case is::
+This breaks because migrate_disable() does not protect against reentrancy from
+a preempting task. A correct substitution for this case is::
 
   func()
   {
diff --git linux-libre-5.10-gnu1/Documentation/locking/seqlock.rst linux-libre-5.10.108-gnu1/Documentation/locking/seqlock.rst
index a334b584f2b3..64405e5da63e 100644
--- linux-libre-5.10-gnu1/Documentation/locking/seqlock.rst
+++ linux-libre-5.10.108-gnu1/Documentation/locking/seqlock.rst
@@ -89,7 +89,7 @@ Read path::
 
 .. _seqcount_locktype_t:
 
-Sequence counters with associated locks (``seqcount_LOCKTYPE_t``)
+Sequence counters with associated locks (``seqcount_LOCKNAME_t``)
 -----------------------------------------------------------------
 
 As discussed at :ref:`seqcount_t`, sequence count write side critical
@@ -115,27 +115,26 @@ The following sequence counters with associated locks are defined:
   - ``seqcount_mutex_t``
   - ``seqcount_ww_mutex_t``
 
-The plain seqcount read and write APIs branch out to the specific
-seqcount_LOCKTYPE_t implementation at compile-time. This avoids kernel
-API explosion per each new seqcount LOCKTYPE.
+The sequence counter read and write APIs can take either a plain
+seqcount_t or any of the seqcount_LOCKNAME_t variants above.
 
-Initialization (replace "LOCKTYPE" with one of the supported locks)::
+Initialization (replace "LOCKNAME" with one of the supported locks)::
 
 	/* dynamic */
-	seqcount_LOCKTYPE_t foo_seqcount;
-	seqcount_LOCKTYPE_init(&foo_seqcount, &lock);
+	seqcount_LOCKNAME_t foo_seqcount;
+	seqcount_LOCKNAME_init(&foo_seqcount, &lock);
 
 	/* static */
-	static seqcount_LOCKTYPE_t foo_seqcount =
-		SEQCNT_LOCKTYPE_ZERO(foo_seqcount, &lock);
+	static seqcount_LOCKNAME_t foo_seqcount =
+		SEQCNT_LOCKNAME_ZERO(foo_seqcount, &lock);
 
 	/* C99 struct init */
 	struct {
-		.seq   = SEQCNT_LOCKTYPE_ZERO(foo.seq, &lock),
+		.seq   = SEQCNT_LOCKNAME_ZERO(foo.seq, &lock),
 	} foo;
 
 Write path: same as in :ref:`seqcount_t`, while running from a context
-with the associated LOCKTYPE lock acquired.
+with the associated write serialization lock acquired.
 
 Read path: same as in :ref:`seqcount_t`.
 
diff --git linux-libre-5.10-gnu1/Documentation/networking/bonding.rst linux-libre-5.10.108-gnu1/Documentation/networking/bonding.rst
index adc314639085..413dca513e1d 100644
--- linux-libre-5.10-gnu1/Documentation/networking/bonding.rst
+++ linux-libre-5.10.108-gnu1/Documentation/networking/bonding.rst
@@ -196,11 +196,12 @@ ad_actor_sys_prio
 ad_actor_system
 
 	In an AD system, this specifies the mac-address for the actor in
-	protocol packet exchanges (LACPDUs). The value cannot be NULL or
-	multicast. It is preferred to have the local-admin bit set for this
-	mac but driver does not enforce it. If the value is not given then
-	system defaults to using the masters' mac address as actors' system
-	address.
+	protocol packet exchanges (LACPDUs). The value cannot be a multicast
+	address. If the all-zeroes MAC is specified, bonding will internally
+	use the MAC of the bond itself. It is preferred to have the
+	local-admin bit set for this mac but driver does not enforce it. If
+	the value is not given then system defaults to using the masters'
+	mac address as actors' system address.
 
 	This parameter has effect only in 802.3ad mode and is available through
 	SysFs interface.
diff --git linux-libre-5.10-gnu1/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst linux-libre-5.10.108-gnu1/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
index f1d5233e5e51..0a233b17c664 100644
--- linux-libre-5.10-gnu1/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
+++ linux-libre-5.10.108-gnu1/Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst
@@ -440,6 +440,22 @@ NOTE: For 82599-based network connections, if you are enabling jumbo frames in
 a virtual function (VF), jumbo frames must first be enabled in the physical
 function (PF). The VF MTU setting cannot be larger than the PF MTU.
 
+NBASE-T Support
+---------------
+The ixgbe driver supports NBASE-T on some devices. However, the advertisement
+of NBASE-T speeds is suppressed by default, to accommodate broken network
+switches which cannot cope with advertised NBASE-T speeds. Use the ethtool
+command to enable advertising NBASE-T speeds on devices which support it::
+
+  ethtool -s eth? advertise 0x1800000001028
+
+On Linux systems with INTERFACES(5), this can be specified as a pre-up command
+in /etc/network/interfaces so that the interface is always brought up with
+NBASE-T support, e.g.::
+
+  iface eth? inet dhcp
+       pre-up ethtool -s eth? advertise 0x1800000001028 || true
+
 Generic Receive Offload, aka GRO
 --------------------------------
 The driver supports the in-kernel software implementation of GRO. GRO has
diff --git linux-libre-5.10-gnu1/Documentation/networking/ip-sysctl.rst linux-libre-5.10.108-gnu1/Documentation/networking/ip-sysctl.rst
index 25e6673a085a..4822a058a81d 100644
--- linux-libre-5.10-gnu1/Documentation/networking/ip-sysctl.rst
+++ linux-libre-5.10.108-gnu1/Documentation/networking/ip-sysctl.rst
@@ -630,16 +630,15 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 
 	default: initial size of receive buffer used by TCP sockets.
 	This value overrides net.core.rmem_default used by other protocols.
-	Default: 87380 bytes. This value results in window of 65535 with
-	default setting of tcp_adv_win_scale and tcp_app_win:0 and a bit
-	less for default tcp_app_win. See below about these variables.
+	Default: 131072 bytes.
+	This value results in initial window of 65535.
 
 	max: maximal size of receive buffer allowed for automatically
 	selected receiver buffers for TCP socket. This value does not override
 	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
 	automatic tuning of that socket's receive buffer size, in which
 	case this value is ignored.
-	Default: between 87380B and 6MB, depending on RAM size.
+	Default: between 131072 and 6MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
 	Enable select acknowledgments (SACKS).
@@ -752,7 +751,7 @@ tcp_fastopen_blackhole_timeout_sec - INTEGER
 	initial value when the blackhole issue goes away.
 	0 to disable the blackhole detection.
 
-	By default, it is set to 1hr.
+	By default, it is set to 0 (feature is disabled).
 
 tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs
 	The list consists of a primary key and an optional backup key. The
diff --git linux-libre-5.10-gnu1/Documentation/networking/ipvs-sysctl.rst linux-libre-5.10.108-gnu1/Documentation/networking/ipvs-sysctl.rst
index 2afccc63856e..1cfbf1add2fc 100644
--- linux-libre-5.10-gnu1/Documentation/networking/ipvs-sysctl.rst
+++ linux-libre-5.10.108-gnu1/Documentation/networking/ipvs-sysctl.rst
@@ -37,8 +37,7 @@ conn_reuse_mode - INTEGER
 
 	0: disable any special handling on port reuse. The new
 	connection will be delivered to the same real server that was
-	servicing the previous connection. This will effectively
-	disable expire_nodest_conn.
+	servicing the previous connection.
 
 	bit 1: enable rescheduling of new connections when it is safe.
 	That is, whenever expire_nodest_conn and for TCP sockets, when
diff --git linux-libre-5.10-gnu1/Documentation/networking/netdev-FAQ.rst linux-libre-5.10.108-gnu1/Documentation/networking/netdev-FAQ.rst
index 4b9ed5874d5a..be88ab15e53c 100644
--- linux-libre-5.10-gnu1/Documentation/networking/netdev-FAQ.rst
+++ linux-libre-5.10.108-gnu1/Documentation/networking/netdev-FAQ.rst
@@ -144,77 +144,13 @@ Please send incremental versions on top of what has been merged in order to fix
 the patches the way they would look like if your latest patch series was to be
 merged.
 
-Q: How can I tell what patches are queued up for backporting to the various stable releases?
---------------------------------------------------------------------------------------------
-A: Normally Greg Kroah-Hartman collects stable commits himself, but for
-networking, Dave collects up patches he deems critical for the
-networking subsystem, and then hands them off to Greg.
-
-There is a patchworks queue that you can see here:
-
-  https://patchwork.kernel.org/bundle/netdev/stable/?state=*
-
-It contains the patches which Dave has selected, but not yet handed off
-to Greg.  If Greg already has the patch, then it will be here:
-
-  https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git
-
-A quick way to find whether the patch is in this stable-queue is to
-simply clone the repo, and then git grep the mainline commit ID, e.g.
-::
-
-  stable-queue$ git grep -l 284041ef21fdf2e
-  releases/3.0.84/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
-  releases/3.4.51/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
-  releases/3.9.8/ipv6-fix-possible-crashes-in-ip6_cork_release.patch
-  stable/stable-queue$
-
-Q: I see a network patch and I think it should be backported to stable.
------------------------------------------------------------------------
-Q: Should I request it via stable@vger.kernel.org like the references in
-the kernel's Documentation/process/stable-kernel-rules.rst file say?
-A: No, not for networking.  Check the stable queues as per above first
-to see if it is already queued.  If not, then send a mail to netdev,
-listing the upstream commit ID and why you think it should be a stable
-candidate.
-
-Before you jump to go do the above, do note that the normal stable rules
-in :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
-still apply.  So you need to explicitly indicate why it is a critical
-fix and exactly what users are impacted.  In addition, you need to
-convince yourself that you *really* think it has been overlooked,
-vs. having been considered and rejected.
-
-Generally speaking, the longer it has had a chance to "soak" in
-mainline, the better the odds that it is an OK candidate for stable.  So
-scrambling to request a commit be added the day after it appears should
-be avoided.
-
-Q: I have created a network patch and I think it should be backported to stable.
---------------------------------------------------------------------------------
-Q: Should I add a Cc: stable@vger.kernel.org like the references in the
-kernel's Documentation/ directory say?
-A: No.  See above answer.  In short, if you think it really belongs in
-stable, then ensure you write a decent commit log that describes who
-gets impacted by the bug fix and how it manifests itself, and when the
-bug was introduced.  If you do that properly, then the commit will get
-handled appropriately and most likely get put in the patchworks stable
-queue if it really warrants it.
-
-If you think there is some valid information relating to it being in
-stable that does *not* belong in the commit log, then use the three dash
-marker line as described in
-:ref:`Documentation/process/submitting-patches.rst <the_canonical_patch_format>`
-to temporarily embed that information into the patch that you send.
-
-Q: Are all networking bug fixes backported to all stable releases?
-------------------------------------------------------------------
-A: Due to capacity, Dave could only take care of the backports for the
-last two stable releases. For earlier stable releases, each stable
-branch maintainer is supposed to take care of them. If you find any
-patch is missing from an earlier stable branch, please notify
-stable@vger.kernel.org with either a commit ID or a formal patch
-backported, and CC Dave and other relevant networking developers.
+Q: Are there special rules regarding stable submissions on netdev?
+---------------------------------------------------------------
+While it used to be the case that netdev submissions were not supposed
+to carry explicit ``CC: stable@vger.kernel.org`` tags that is no longer
+the case today. Please follow the standard stable rules in
+:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`,
+and make sure you include appropriate Fixes tags!
 
 Q: Is the comment style convention different for the networking content?
 ------------------------------------------------------------------------
diff --git linux-libre-5.10-gnu1/Documentation/powerpc/syscall64-abi.rst linux-libre-5.10.108-gnu1/Documentation/powerpc/syscall64-abi.rst
index cf9b2857c72a..d8242049bdcb 100644
--- linux-libre-5.10-gnu1/Documentation/powerpc/syscall64-abi.rst
+++ linux-libre-5.10.108-gnu1/Documentation/powerpc/syscall64-abi.rst
@@ -96,6 +96,16 @@ auxiliary vector.
 
 scv 0 syscalls will always behave as PPC_FEATURE2_HTM_NOSC.
 
+ptrace
+------
+When ptracing system calls (PTRACE_SYSCALL), the pt_regs.trap value contains
+the system call type that can be used to distinguish between sc and scv 0
+system calls, and the different register conventions can be accounted for.
+
+If the value of (pt_regs.trap & 0xfff0) is 0xc00 then the system call was
+performed with the sc instruction, if it is 0x3000 then the system call was
+performed with the scv 0 instruction.
+
 vsyscall
 ========
 
diff --git linux-libre-5.10-gnu1/Documentation/process/stable-kernel-rules.rst linux-libre-5.10.108-gnu1/Documentation/process/stable-kernel-rules.rst
index 3973556250e1..003c865e9c21 100644
--- linux-libre-5.10-gnu1/Documentation/process/stable-kernel-rules.rst
+++ linux-libre-5.10.108-gnu1/Documentation/process/stable-kernel-rules.rst
@@ -35,12 +35,6 @@ Rules on what kind of patches are accepted, and which ones are not, into the
 Procedure for submitting patches to the -stable tree
 ----------------------------------------------------
 
- - If the patch covers files in net/ or drivers/net please follow netdev stable
-   submission guidelines as described in
-   :ref:`Documentation/networking/netdev-FAQ.rst <netdev-FAQ>`
-   after first checking the stable networking queue at
-   https://patchwork.kernel.org/bundle/netdev/stable/?state=*
-   to ensure the requested patch is not already queued up.
  - Security patches should not be handled (solely) by the -stable review
    process but should follow the procedures in
    :ref:`Documentation/admin-guide/security-bugs.rst <securitybugs>`.
diff --git linux-libre-5.10-gnu1/Documentation/process/submitting-patches.rst linux-libre-5.10.108-gnu1/Documentation/process/submitting-patches.rst
index 83d9a82055a7..5a267f5d1a50 100644
--- linux-libre-5.10-gnu1/Documentation/process/submitting-patches.rst
+++ linux-libre-5.10.108-gnu1/Documentation/process/submitting-patches.rst
@@ -250,11 +250,6 @@ should also read
 :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
 in addition to this file.
 
-Note, however, that some subsystem maintainers want to come to their own
-conclusions on which patches should go to the stable trees.  The networking
-maintainer, in particular, would rather not see individual developers
-adding lines like the above to their patches.
-
 If changes affect userland-kernel interfaces, please send the MAN-PAGES
 maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at
 least a notification of the change, so that some information makes its way
diff --git linux-libre-5.10-gnu1/Documentation/scsi/libsas.rst linux-libre-5.10.108-gnu1/Documentation/scsi/libsas.rst
index 7216b5d25800..ea63ab3a9216 100644
--- linux-libre-5.10-gnu1/Documentation/scsi/libsas.rst
+++ linux-libre-5.10.108-gnu1/Documentation/scsi/libsas.rst
@@ -189,13 +189,10 @@ num_phys
 The event interface::
 
 	/* LLDD calls these to notify the class of an event. */
-	void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
-	void (*notify_port_event)(struct sas_phy *, enum port_event);
-	void (*notify_phy_event)(struct sas_phy *, enum phy_event);
-
-When sas_register_ha() returns, those are set and can be
-called by the LLDD to notify the SAS layer of such events
-the SAS layer.
+	void sas_notify_port_event(struct sas_phy *, enum port_event);
+	void sas_notify_phy_event(struct sas_phy *, enum phy_event);
+	void sas_notify_port_event_gfp(struct sas_phy *, enum port_event, gfp_t);
+	void sas_notify_phy_event_gfp(struct sas_phy *, enum phy_event, gfp_t);
 
 The port notification::
 
diff --git linux-libre-5.10-gnu1/Documentation/security/keys/core.rst linux-libre-5.10.108-gnu1/Documentation/security/keys/core.rst
index aa0081685ee1..b3ed5c581034 100644
--- linux-libre-5.10-gnu1/Documentation/security/keys/core.rst
+++ linux-libre-5.10.108-gnu1/Documentation/security/keys/core.rst
@@ -1040,8 +1040,8 @@ The keyctl syscall functions are:
 
      "key" is the ID of the key to be watched.
 
-     "queue_fd" is a file descriptor referring to an open "/dev/watch_queue"
-     which manages the buffer into which notifications will be delivered.
+     "queue_fd" is a file descriptor referring to an open pipe which
+     manages the buffer into which notifications will be delivered.
 
      "filter" is either NULL to remove a watch or a filter specification to
      indicate what events are required from the key.
diff --git linux-libre-5.10-gnu1/Documentation/sound/alsa-configuration.rst linux-libre-5.10.108-gnu1/Documentation/sound/alsa-configuration.rst
index d66da6cb867c..3aa511e42e10 100644
--- linux-libre-5.10-gnu1/Documentation/sound/alsa-configuration.rst
+++ linux-libre-5.10.108-gnu1/Documentation/sound/alsa-configuration.rst
@@ -1501,7 +1501,7 @@ Module for Digigram miXart8 sound cards.
 
 This module supports multiple cards.
 Note: One miXart8 board will be represented as 4 alsa cards.
-See MIXART.txt for details.
+See Documentation/sound/cards/mixart.rst for details.
 
 When the driver is compiled as a module and the hotplug firmware
 is supported, the firmware data is loaded via hotplug automatically.
diff --git linux-libre-5.10-gnu1/Documentation/sound/hd-audio/models.rst linux-libre-5.10.108-gnu1/Documentation/sound/hd-audio/models.rst
index 0ea967d34583..d25335993e55 100644
--- linux-libre-5.10-gnu1/Documentation/sound/hd-audio/models.rst
+++ linux-libre-5.10.108-gnu1/Documentation/sound/hd-audio/models.rst
@@ -326,6 +326,8 @@ usi-headset
     Headset support on USI machines
 dual-codecs
     Lenovo laptops with dual codecs
+alc285-hp-amp-init
+    HP laptops which require speaker amplifier initialization (ALC285)
 
 ALC680
 ======
diff --git linux-libre-5.10-gnu1/Documentation/sphinx/parse-headers.pl linux-libre-5.10.108-gnu1/Documentation/sphinx/parse-headers.pl
index 1910079f984f..b063f2f1cfb2 100755
--- linux-libre-5.10-gnu1/Documentation/sphinx/parse-headers.pl
+++ linux-libre-5.10.108-gnu1/Documentation/sphinx/parse-headers.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 use strict;
 use Text::Tabs;
 use Getopt::Long;
diff --git linux-libre-5.10-gnu1/Documentation/target/tcm_mod_builder.py linux-libre-5.10.108-gnu1/Documentation/target/tcm_mod_builder.py
index 1548d8420499..54492aa813b9 100755
--- linux-libre-5.10-gnu1/Documentation/target/tcm_mod_builder.py
+++ linux-libre-5.10.108-gnu1/Documentation/target/tcm_mod_builder.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/env python
 # The TCM v4 multi-protocol fabric module generation script for drivers/target/$NEW_MOD
 #
 # Copyright (c) 2010 Rising Tide Systems
diff --git linux-libre-5.10-gnu1/Documentation/trace/events.rst linux-libre-5.10.108-gnu1/Documentation/trace/events.rst
index 2a5aa48eff6c..9df29a935757 100644
--- linux-libre-5.10-gnu1/Documentation/trace/events.rst
+++ linux-libre-5.10.108-gnu1/Documentation/trace/events.rst
@@ -198,6 +198,15 @@ The glob (~) accepts a wild card character (\*,?) and character classes
   prev_comm ~ "*sh*"
   prev_comm ~ "ba*sh"
 
+If the field is a pointer that points into user space (for example
+"filename" from sys_enter_openat), then you have to append ".ustring" to the
+field name::
+
+  filename.ustring ~ "password"
+
+As the kernel will have to know how to retrieve the memory that the pointer
+is at from user space.
+
 5.2 Setting filters
 -------------------
 
@@ -230,6 +239,16 @@ Currently the caret ('^') for an error always appears at the beginning of
 the filter string; the error message should still be useful though
 even without more accurate position info.
 
+5.2.1 Filter limitations
+------------------------
+
+If a filter is placed on a string pointer ``(char *)`` that does not point
+to a string on the ring buffer, but instead points to kernel or user space
+memory, then, for safety reasons, at most 1024 bytes of the content is
+copied onto a temporary buffer to do the compare. If the copy of the memory
+faults (the pointer points to memory that should not be accessed), then the
+string compare will be treated as not matching.
+
 5.3 Clearing filters
 --------------------
 
diff --git linux-libre-5.10-gnu1/Documentation/trace/histogram.rst linux-libre-5.10.108-gnu1/Documentation/trace/histogram.rst
index b71e09f745c3..f99be8062bc8 100644
--- linux-libre-5.10-gnu1/Documentation/trace/histogram.rst
+++ linux-libre-5.10.108-gnu1/Documentation/trace/histogram.rst
@@ -191,7 +191,7 @@ Documentation written by Tom Zanussi
                                 with the event, in nanoseconds.  May be
 			        modified by .usecs to have timestamps
 			        interpreted as microseconds.
-    cpu                    int  the cpu on which the event occurred.
+    common_cpu             int  the cpu on which the event occurred.
     ====================== ==== =======================================
 
 Extended error information
diff --git linux-libre-5.10-gnu1/Documentation/trace/postprocess/decode_msr.py linux-libre-5.10.108-gnu1/Documentation/trace/postprocess/decode_msr.py
index 0ab40e0db580..aa9cc7abd5c2 100644
--- linux-libre-5.10-gnu1/Documentation/trace/postprocess/decode_msr.py
+++ linux-libre-5.10.108-gnu1/Documentation/trace/postprocess/decode_msr.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/env python
 # add symbolic names to read_msr / write_msr in trace
 # decode_msr msr-index.h < trace
 import sys
diff --git linux-libre-5.10-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl linux-libre-5.10.108-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
index 0a120aae33ce..b9b7d80c2f9d 100644
--- linux-libre-5.10-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
+++ linux-libre-5.10.108-gnu1/Documentation/trace/postprocess/trace-pagealloc-postprocess.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 # This is a POC (proof of concept or piece of crap, take your pick) for reading the
 # text representation of trace output related to page allocation. It makes an attempt
 # to extract some high-level information on what is going on. The accuracy of the parser
diff --git linux-libre-5.10-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl linux-libre-5.10.108-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
index 995da15b16ca..2f4e39875fb3 100644
--- linux-libre-5.10-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
+++ linux-libre-5.10.108-gnu1/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/env perl
 # This is a POC for reading the text representation of trace output related to
 # page reclaim. It makes an attempt to extract some high-level information on
 # what is going on. The accuracy of the parser may vary
diff --git linux-libre-5.10-gnu1/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst linux-libre-5.10.108-gnu1/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index ce728c757eaf..b864869b42bc 100644
--- linux-libre-5.10-gnu1/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ linux-libre-5.10.108-gnu1/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -4030,7 +4030,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     :stub-columns: 0
     :widths:       1 1 2
 
-    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT``
+    * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED``
       - 0x00000001
       -
     * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT``
@@ -4238,6 +4238,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED``
       - 0x00000100
       -
+    * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT``
+      - 0x00000200
+      -
 
 .. c:type:: v4l2_hevc_dpb_entry
 
diff --git linux-libre-5.10-gnu1/Documentation/userspace-api/media/v4l/subdev-formats.rst linux-libre-5.10.108-gnu1/Documentation/userspace-api/media/v4l/subdev-formats.rst
index c9b7bb3ca089..eff6727c69d3 100644
--- linux-libre-5.10-gnu1/Documentation/userspace-api/media/v4l/subdev-formats.rst
+++ linux-libre-5.10.108-gnu1/Documentation/userspace-api/media/v4l/subdev-formats.rst
@@ -1567,8 +1567,8 @@ The following tables list existing packed RGB formats.
       - MEDIA_BUS_FMT_RGB101010_1X30
       - 0x1018
       -
-      - 0
-      - 0
+      -
+      -
       - r\ :sub:`9`
       - r\ :sub:`8`
       - r\ :sub:`7`
diff --git linux-libre-5.10-gnu1/Documentation/userspace-api/seccomp_filter.rst linux-libre-5.10.108-gnu1/Documentation/userspace-api/seccomp_filter.rst
index bd9165241b6c..6efb41cc8072 100644
--- linux-libre-5.10-gnu1/Documentation/userspace-api/seccomp_filter.rst
+++ linux-libre-5.10.108-gnu1/Documentation/userspace-api/seccomp_filter.rst
@@ -250,14 +250,14 @@ Users can read via ``ioctl(SECCOMP_IOCTL_NOTIF_RECV)``  (or ``poll()``) on a
 seccomp notification fd to receive a ``struct seccomp_notif``, which contains
 five members: the input length of the structure, a unique-per-filter ``id``,
 the ``pid`` of the task which triggered this request (which may be 0 if the
-task is in a pid ns not visible from the listener's pid namespace), a ``flags``
-member which for now only has ``SECCOMP_NOTIF_FLAG_SIGNALED``, representing
-whether or not the notification is a result of a non-fatal signal, and the
-``data`` passed to seccomp. Userspace can then make a decision based on this
-information about what to do, and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a
-response, indicating what should be returned to userspace. The ``id`` member of
-``struct seccomp_notif_resp`` should be the same ``id`` as in ``struct
-seccomp_notif``.
+task is in a pid ns not visible from the listener's pid namespace). The
+notification also contains the ``data`` passed to seccomp, and a filters flag.
+The structure should be zeroed out prior to calling the ioctl.
+
+Userspace can then make a decision based on this information about what to do,
+and ``ioctl(SECCOMP_IOCTL_NOTIF_SEND)`` a response, indicating what should be
+returned to userspace. The ``id`` member of ``struct seccomp_notif_resp`` should
+be the same ``id`` as in ``struct seccomp_notif``.
 
 It is worth noting that ``struct seccomp_data`` contains the values of register
 arguments to the syscall, but does not contain pointers to memory. The task's
diff --git linux-libre-5.10-gnu1/Documentation/virt/kvm/api.rst linux-libre-5.10.108-gnu1/Documentation/virt/kvm/api.rst
index e00a66d72372..cd8a58556804 100644
--- linux-libre-5.10-gnu1/Documentation/virt/kvm/api.rst
+++ linux-libre-5.10.108-gnu1/Documentation/virt/kvm/api.rst
@@ -182,6 +182,9 @@ is dependent on the CPU capability and the kernel configuration. The limit can
 be retrieved using KVM_CAP_ARM_VM_IPA_SIZE of the KVM_CHECK_EXTENSION
 ioctl() at run-time.
 
+Creation of the VM will fail if the requested IPA size (whether it is
+implicit or explicit) is unsupported on the host.
+
 Please note that configuring the IPA size does not affect the capability
 exposed by the guest CPUs in ID_AA64MMFR0_EL1[PARange]. It only affects
 size of the address translated by the stage2 level (guest physical to
@@ -1264,6 +1267,9 @@ field userspace_addr, which must point at user addressable memory for
 the entire memory slot size.  Any object may back this memory, including
 anonymous memory, ordinary files, and hugetlbfs.
 
+On architectures that support a form of address tagging, userspace_addr must
+be an untagged address.
+
 It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr
 be identical.  This allows large pages in the guest to be backed by large
 pages in the host.
@@ -1316,7 +1322,7 @@ documentation when it pops into existence).
 
 :Capability: KVM_CAP_ENABLE_CAP_VM
 :Architectures: all
-:Type: vcpu ioctl
+:Type: vm ioctl
 :Parameters: struct kvm_enable_cap (in)
 :Returns: 0 on success; -1 on error
 
@@ -4804,8 +4810,10 @@ If an MSR access is not permitted through the filtering, it generates a
 allows user space to deflect and potentially handle various MSR accesses
 into user space.
 
-If a vCPU is in running state while this ioctl is invoked, the vCPU may
-experience inconsistent filtering behavior on MSR accesses.
+Note, invoking this ioctl with a vCPU is running is inherently racy.  However,
+KVM does guarantee that vCPUs will see either the previous filter or the new
+filter, e.g. MSRs with identical settings in both the old and new filter will
+have deterministic behavior.
 
 
 5. The kvm_run structure
diff --git linux-libre-5.10-gnu1/Documentation/virt/kvm/mmu.rst linux-libre-5.10.108-gnu1/Documentation/virt/kvm/mmu.rst
index 5bfe28b0728e..20d85daed395 100644
--- linux-libre-5.10-gnu1/Documentation/virt/kvm/mmu.rst
+++ linux-libre-5.10.108-gnu1/Documentation/virt/kvm/mmu.rst
@@ -171,8 +171,8 @@ Shadow pages contain the following information:
     shadow pages) so role.quadrant takes values in the range 0..3.  Each
     quadrant maps 1GB virtual address space.
   role.access:
-    Inherited guest access permissions in the form uwx.  Note execute
-    permission is positive, not negative.
+    Inherited guest access permissions from the parent ptes in the form uwx.
+    Note execute permission is positive, not negative.
   role.invalid:
     The page is invalid and should not be used.  It is a root page that is
     currently pinned (by a cpu hardware register pointing to it); once it is
diff --git linux-libre-5.10-gnu1/Documentation/vm/arch_pgtable_helpers.rst linux-libre-5.10.108-gnu1/Documentation/vm/arch_pgtable_helpers.rst
index f3591ee3aaa8..552567d863b8 100644
--- linux-libre-5.10-gnu1/Documentation/vm/arch_pgtable_helpers.rst
+++ linux-libre-5.10.108-gnu1/Documentation/vm/arch_pgtable_helpers.rst
@@ -50,7 +50,7 @@ PTE Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pte_mkwrite               | Creates a writable PTE                           |
 +---------------------------+--------------------------------------------------+
-| pte_mkwrprotect           | Creates a write protected PTE                    |
+| pte_wrprotect             | Creates a write protected PTE                    |
 +---------------------------+--------------------------------------------------+
 | pte_mkspecial             | Creates a special PTE                            |
 +---------------------------+--------------------------------------------------+
@@ -120,7 +120,7 @@ PMD Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pmd_mkwrite               | Creates a writable PMD                           |
 +---------------------------+--------------------------------------------------+
-| pmd_mkwrprotect           | Creates a write protected PMD                    |
+| pmd_wrprotect             | Creates a write protected PMD                    |
 +---------------------------+--------------------------------------------------+
 | pmd_mkspecial             | Creates a special PMD                            |
 +---------------------------+--------------------------------------------------+
@@ -186,7 +186,7 @@ PUD Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | pud_mkwrite               | Creates a writable PUD                           |
 +---------------------------+--------------------------------------------------+
-| pud_mkwrprotect           | Creates a write protected PUD                    |
+| pud_wrprotect             | Creates a write protected PUD                    |
 +---------------------------+--------------------------------------------------+
 | pud_mkdevmap              | Creates a ZONE_DEVICE mapped PUD                 |
 +---------------------------+--------------------------------------------------+
@@ -224,7 +224,7 @@ HugeTLB Page Table Helpers
 +---------------------------+--------------------------------------------------+
 | huge_pte_mkwrite          | Creates a writable HugeTLB                       |
 +---------------------------+--------------------------------------------------+
-| huge_pte_mkwrprotect      | Creates a write protected HugeTLB                |
+| huge_pte_wrprotect        | Creates a write protected HugeTLB                |
 +---------------------------+--------------------------------------------------+
 | huge_ptep_get_and_clear   | Clears a HugeTLB                                 |
 +---------------------------+--------------------------------------------------+
diff --git linux-libre-5.10-gnu1/Documentation/vm/slub.rst linux-libre-5.10.108-gnu1/Documentation/vm/slub.rst
index 03f294a638bd..d3028554b1e9 100644
--- linux-libre-5.10-gnu1/Documentation/vm/slub.rst
+++ linux-libre-5.10.108-gnu1/Documentation/vm/slub.rst
@@ -181,7 +181,7 @@ SLUB Debug output
 Here is a sample of slub debug output::
 
  ====================================================================
- BUG kmalloc-8: Redzone overwritten
+ BUG kmalloc-8: Right Redzone overwritten
  --------------------------------------------------------------------
 
  INFO: 0xc90f6d28-0xc90f6d2b. First byte 0x00 instead of 0xcc
@@ -189,10 +189,10 @@ Here is a sample of slub debug output::
  INFO: Object 0xc90f6d20 @offset=3360 fp=0xc90f6d58
  INFO: Allocated in get_modalias+0x61/0xf5 age=53 cpu=1 pid=554
 
- Bytes b4 0xc90f6d10:  00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
-   Object 0xc90f6d20:  31 30 31 39 2e 30 30 35                         1019.005
-  Redzone 0xc90f6d28:  00 cc cc cc                                     .
-  Padding 0xc90f6d50:  5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ
+ Bytes b4 (0xc90f6d10): 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
+ Object   (0xc90f6d20): 31 30 31 39 2e 30 30 35                         1019.005
+ Redzone  (0xc90f6d28): 00 cc cc cc                                     .
+ Padding  (0xc90f6d50): 5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ
 
    [<c010523d>] dump_trace+0x63/0x1eb
    [<c01053df>] show_trace_log_lvl+0x1a/0x2f
diff --git linux-libre-5.10-gnu1/Documentation/x86/topology.rst linux-libre-5.10.108-gnu1/Documentation/x86/topology.rst
index e29739904e37..7f58010ea86a 100644
--- linux-libre-5.10-gnu1/Documentation/x86/topology.rst
+++ linux-libre-5.10.108-gnu1/Documentation/x86/topology.rst
@@ -41,6 +41,8 @@ Package
 Packages contain a number of cores plus shared resources, e.g. DRAM
 controller, shared caches etc.
 
+Modern systems may also use the term 'Die' for package.
+
 AMD nomenclature for package is 'Node'.
 
 Package-related topology information in the kernel:
@@ -53,11 +55,18 @@ Package-related topology information in the kernel:
 
     The number of dies in a package. This information is retrieved via CPUID.
 
+  - cpuinfo_x86.cpu_die_id:
+
+    The physical ID of the die. This information is retrieved via CPUID.
+
   - cpuinfo_x86.phys_proc_id:
 
     The physical ID of the package. This information is retrieved via CPUID
     and deduced from the APIC IDs of the cores in the package.
 
+    Modern systems use this value for the socket. There may be multiple
+    packages within a socket. This value may differ from cpu_die_id.
+
   - cpuinfo_x86.logical_proc_id:
 
     The logical ID of the package. As we do not trust BIOSes to enumerate the
diff --git linux-libre-5.10-gnu1/MAINTAINERS linux-libre-5.10.108-gnu1/MAINTAINERS
index 281de213ef47..c64c9354c287 100644
--- linux-libre-5.10-gnu1/MAINTAINERS
+++ linux-libre-5.10.108-gnu1/MAINTAINERS
@@ -1155,7 +1155,7 @@ M:	Joel Fernandes <joel@joelfernandes.org>
 M:	Christian Brauner <christian@brauner.io>
 M:	Hridya Valsaraju <hridya@google.com>
 M:	Suren Baghdasaryan <surenb@google.com>
-L:	devel@driverdev.osuosl.org
+L:	linux-kernel@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 F:	drivers/android/
@@ -6694,6 +6694,7 @@ F:	Documentation/filesystems/f2fs.rst
 F:	fs/f2fs/
 F:	include/linux/f2fs_fs.h
 F:	include/trace/events/f2fs.h
+F:	include/uapi/linux/f2fs.h
 
 F71805F HARDWARE MONITORING DRIVER
 M:	Jean Delvare <jdelvare@suse.com>
@@ -7309,7 +7310,6 @@ L:	linux-hardening@vger.kernel.org
 S:	Maintained
 F:	Documentation/kbuild/gcc-plugins.rst
 F:	scripts/Makefile.gcc-plugins
-F:	scripts/gcc-plugin.sh
 F:	scripts/gcc-plugins/
 
 GCOV BASED KERNEL PROFILING
@@ -8001,7 +8001,6 @@ F:	drivers/crypto/hisilicon/sec2/sec_main.c
 
 HISILICON STAGING DRIVERS FOR HIKEY 960/970
 M:	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/hikey9xx/
 
@@ -16665,7 +16664,7 @@ F:	drivers/staging/vt665?/
 
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-L:	devel@driverdev.osuosl.org
+L:	linux-staging@lists.linux.dev
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 F:	drivers/staging/
@@ -18705,7 +18704,7 @@ VME SUBSYSTEM
 M:	Martyn Welch <martyn@welchs.me.uk>
 M:	Manohar Vanga <manohar.vanga@gmail.com>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-L:	devel@driverdev.osuosl.org
+L:	linux-kernel@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
 F:	Documentation/driver-api/vme.rst
diff --git linux-libre-5.10-gnu1/Makefile linux-libre-5.10.108-gnu1/Makefile
index 9d5bb08d565e..eac87de8602f 100644
--- linux-libre-5.10-gnu1/Makefile
+++ linux-libre-5.10.108-gnu1/Makefile
@@ -1,9 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 0
+SUBLEVEL = 108
 EXTRAVERSION = -gnu1
-NAME = Kleptomaniac Octopus
+NAME = Dare mighty things
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -265,7 +265,8 @@ no-dot-config-targets := $(clean-targets) \
 			 $(version_h) headers headers_% archheaders archscripts \
 			 %asm-generic kernelversion %src-pkg dt_binding_check \
 			 outputmakefile
-no-sync-config-targets := $(no-dot-config-targets) %install kernelrelease
+no-sync-config-targets := $(no-dot-config-targets) %install kernelrelease \
+			  image_name
 single-targets := %.a %.i %.ko %.lds %.ll %.lst %.mod %.o %.s %.symtypes %/
 
 config-build	:=
@@ -450,7 +451,7 @@ LEX		= flex
 YACC		= bison
 AWK		= awk
 INSTALLKERNEL  := installkernel
-DEPMOD		= /sbin/depmod
+DEPMOD		= depmod
 PERL		= perl
 PYTHON		= python
 PYTHON3		= python3
@@ -703,11 +704,12 @@ $(KCONFIG_CONFIG):
 # This exploits the 'multi-target pattern rule' trick.
 # The syncconfig should be executed only once to make all the targets.
 # (Note: use the grouped target '&:' when we bump to GNU Make 4.3)
-quiet_cmd_syncconfig = SYNC    $@
-      cmd_syncconfig = $(MAKE) -f $(srctree)/Makefile syncconfig
-
+#
+# Do not use $(call cmd,...) here. That would suppress prompts from syncconfig,
+# so you cannot notice that Kconfig is waiting for the user input.
 %/config/auto.conf %/config/auto.conf.cmd %/generated/autoconf.h: $(KCONFIG_CONFIG)
-	+$(call cmd,syncconfig)
+	$(Q)$(kecho) "  SYNC    $@"
+	$(Q)$(MAKE) -f $(srctree)/Makefile syncconfig
 else # !may-sync-config
 # External modules and some install targets need include/generated/autoconf.h
 # and include/config/auto.conf but do not care if they are up-to-date.
@@ -774,16 +776,16 @@ KBUILD_CFLAGS += -Wno-gnu
 KBUILD_CFLAGS += -mno-global-merge
 else
 
-# These warnings generated too much noise in a regular build.
-# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
-KBUILD_CFLAGS += -Wno-unused-but-set-variable
-
 # Warn about unmarked fall-throughs in switch statement.
 # Disabled for clang while comment to attribute conversion happens and
 # https://github.com/ClangBuiltLinux/linux/issues/636 is discussed.
 KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough,)
 endif
 
+# These warnings generated too much noise in a regular build.
+# Use make W=1 to enable them (see scripts/Makefile.extrawarn)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
 KBUILD_CFLAGS += $(call cc-disable-warning, unused-const-variable)
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
@@ -812,10 +814,12 @@ KBUILD_CFLAGS	+= -ftrivial-auto-var-init=zero
 KBUILD_CFLAGS	+= -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang
 endif
 
+DEBUG_CFLAGS	:=
+
 # Workaround for GCC versions < 5.0
 # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801
 ifdef CONFIG_CC_IS_GCC
-DEBUG_CFLAGS	:= $(call cc-ifversion, -lt, 0500, $(call cc-option, -fno-var-tracking-assignments))
+DEBUG_CFLAGS	+= $(call cc-ifversion, -lt, 0500, $(call cc-option, -fno-var-tracking-assignments))
 endif
 
 ifdef CONFIG_DEBUG_INFO
@@ -948,12 +952,6 @@ KBUILD_CFLAGS   += $(call cc-option,-Werror=designated-init)
 # change __FILE__ to the relative path from the srctree
 KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
 
-# ensure -fcf-protection is disabled when using retpoline as it is
-# incompatible with -mindirect-branch=thunk-extern
-ifdef CONFIG_RETPOLINE
-KBUILD_CFLAGS += $(call cc-option,-fcf-protection=none)
-endif
-
 # include additional Makefiles when needed
 include-y			:= scripts/Makefile.extrawarn
 include-$(CONFIG_KASAN)		+= scripts/Makefile.kasan
@@ -981,7 +979,7 @@ LDFLAGS_vmlinux	+= $(call ld-option, -X,)
 endif
 
 ifeq ($(CONFIG_RELR),y)
-LDFLAGS_vmlinux	+= --pack-dyn-relocs=relr
+LDFLAGS_vmlinux	+= --pack-dyn-relocs=relr --use-android-relr-tags
 endif
 
 # We never want expected sections to be placed heuristically by the
@@ -1075,7 +1073,7 @@ export mod_sign_cmd
 HOST_LIBELF_LIBS = $(shell pkg-config libelf --libs 2>/dev/null || echo -lelf)
 
 has_libelf = $(call try-run,\
-               echo "int main() {}" | $(HOSTCC) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
+               echo "int main() {}" | $(HOSTCC) $(KBUILD_HOSTLDFLAGS) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
 
 ifdef CONFIG_STACK_VALIDATION
   ifeq ($(has_libelf),1)
@@ -1086,6 +1084,17 @@ ifdef CONFIG_STACK_VALIDATION
   endif
 endif
 
+PHONY += resolve_btfids_clean
+
+resolve_btfids_O = $(abspath $(objtree))/tools/bpf/resolve_btfids
+
+# tools/bpf/resolve_btfids directory might not exist
+# in output directory, skip its clean in that case
+resolve_btfids_clean:
+ifneq ($(wildcard $(resolve_btfids_O)),)
+	$(Q)$(MAKE) -sC $(srctree)/tools/bpf/resolve_btfids O=$(resolve_btfids_O) clean
+endif
+
 ifdef CONFIG_BPF
 ifdef CONFIG_DEBUG_INFO_BTF
   ifeq ($(has_libelf),1)
@@ -1251,11 +1260,19 @@ define filechk_utsrelease.h
 endef
 
 define filechk_version.h
-	echo \#define LINUX_VERSION_CODE $(shell                         \
-	expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
-	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'
+	if [ $(SUBLEVEL) -gt 255 ]; then                                 \
+		echo \#define LINUX_VERSION_CODE $(shell                 \
+		expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + 255); \
+	else                                                             \
+		echo \#define LINUX_VERSION_CODE $(shell                 \
+		expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
+	fi;                                                              \
+	echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) +  \
+	((c) > 255 ? 255 : (c)))'
 endef
 
+$(version_h): PATCHLEVEL := $(if $(PATCHLEVEL), $(PATCHLEVEL), 0)
+$(version_h): SUBLEVEL := $(if $(SUBLEVEL), $(SUBLEVEL), 0)
 $(version_h): FORCE
 	$(call filechk,version.h)
 	$(Q)rm -f $(old_version_h)
@@ -1467,7 +1484,7 @@ endif # CONFIG_MODULES
 # make distclean Remove editor backup files, patch leftover files and the like
 
 # Directories & files removed with 'make clean'
-CLEAN_FILES += include/ksym vmlinux.symvers \
+CLEAN_FILES += include/ksym vmlinux.symvers modules-only.symvers \
 	       modules.builtin modules.builtin.modinfo modules.nsdeps \
 	       compile_commands.json
 
@@ -1495,7 +1512,7 @@ vmlinuxclean:
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
 	$(Q)$(if $(ARCH_POSTLINK), $(MAKE) -f $(ARCH_POSTLINK) clean)
 
-clean: archclean vmlinuxclean
+clean: archclean vmlinuxclean resolve_btfids_clean
 
 # mrproper - Delete all generated files, including .config
 #
diff --git linux-libre-5.10-gnu1/arch/Kconfig linux-libre-5.10.108-gnu1/arch/Kconfig
index ba4e966484ab..632d60e13494 100644
--- linux-libre-5.10-gnu1/arch/Kconfig
+++ linux-libre-5.10.108-gnu1/arch/Kconfig
@@ -143,6 +143,22 @@ config UPROBES
 	    managed by the kernel and kept transparent to the probed
 	    application. )
 
+config HAVE_64BIT_ALIGNED_ACCESS
+	def_bool 64BIT && !HAVE_EFFICIENT_UNALIGNED_ACCESS
+	help
+	  Some architectures require 64 bit accesses to be 64 bit
+	  aligned, which also requires structs containing 64 bit values
+	  to be 64 bit aligned too. This includes some 32 bit
+	  architectures which can do 64 bit accesses, as well as 64 bit
+	  architectures without unaligned access.
+
+	  This symbol should be selected by an architecture if 64 bit
+	  accesses are required to be 64 bit aligned in this way even
+	  though it is not a 64 bit architecture.
+
+	  See Documentation/unaligned-memory-access.txt for more
+	  information on the topic of unaligned memory accesses.
+
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool
 	help
@@ -1010,6 +1026,9 @@ config RELR
 config ARCH_HAS_MEM_ENCRYPT
 	bool
 
+config ARCH_HAS_CC_PLATFORM
+	bool
+
 config HAVE_SPARSE_SYSCALL_NR
        bool
        help
@@ -1037,6 +1056,12 @@ config ARCH_WANT_LD_ORPHAN_WARN
 	  by the linker, since the locations of such sections can change between linker
 	  versions.
 
+config ARCH_SPLIT_ARG64
+	bool
+	help
+	   If a 32-bit architecture requires 64-bit arguments to be split into
+	   pairs of 32-bit arguments, select this option.
+
 source "kernel/gcov/Kconfig"
 
 source "scripts/gcc-plugins/Kconfig"
diff --git linux-libre-5.10-gnu1/arch/alpha/include/asm/io.h linux-libre-5.10.108-gnu1/arch/alpha/include/asm/io.h
index 1f6a909d1fa5..7bc2f444a89a 100644
--- linux-libre-5.10-gnu1/arch/alpha/include/asm/io.h
+++ linux-libre-5.10.108-gnu1/arch/alpha/include/asm/io.h
@@ -60,7 +60,7 @@ extern inline void set_hae(unsigned long new_hae)
  * Change virtual addresses to physical addresses and vv.
  */
 #ifdef USE_48_BIT_KSEG
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
 	return (unsigned long)address - IDENT_ADDR;
 }
@@ -70,7 +70,7 @@ static inline void * phys_to_virt(unsigned long address)
 	return (void *) (address + IDENT_ADDR);
 }
 #else
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
         unsigned long phys = (unsigned long)address;
 
@@ -106,7 +106,7 @@ static inline void * phys_to_virt(unsigned long address)
 extern unsigned long __direct_map_base;
 extern unsigned long __direct_map_size;
 
-static inline unsigned long __deprecated virt_to_bus(void *address)
+static inline unsigned long __deprecated virt_to_bus(volatile void *address)
 {
 	unsigned long phys = virt_to_phys(address);
 	unsigned long bus = phys + __direct_map_base;
diff --git linux-libre-5.10-gnu1/arch/alpha/include/asm/local64.h linux-libre-5.10.108-gnu1/arch/alpha/include/asm/local64.h
deleted file mode 100644
index 36c93b5cc239..000000000000
--- linux-libre-5.10-gnu1/arch/alpha/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git linux-libre-5.10-gnu1/arch/alpha/kernel/setup.c linux-libre-5.10.108-gnu1/arch/alpha/kernel/setup.c
index 916e42d74a86..7eea28d6f6c8 100644
--- linux-libre-5.10-gnu1/arch/alpha/kernel/setup.c
+++ linux-libre-5.10.108-gnu1/arch/alpha/kernel/setup.c
@@ -325,18 +325,19 @@ setup_memory(void *kernel_end)
 		       i, cluster->usage, cluster->start_pfn,
 		       cluster->start_pfn + cluster->numpages);
 
-		/* Bit 0 is console/PALcode reserved.  Bit 1 is
-		   non-volatile memory -- we might want to mark
-		   this for later.  */
-		if (cluster->usage & 3)
-			continue;
-
 		end = cluster->start_pfn + cluster->numpages;
 		if (end > max_low_pfn)
 			max_low_pfn = end;
 
 		memblock_add(PFN_PHYS(cluster->start_pfn),
 			     cluster->numpages << PAGE_SHIFT);
+
+		/* Bit 0 is console/PALcode reserved.  Bit 1 is
+		   non-volatile memory -- we might want to mark
+		   this for later.  */
+		if (cluster->usage & 3)
+			memblock_reserve(PFN_PHYS(cluster->start_pfn),
+				         cluster->numpages << PAGE_SHIFT);
 	}
 
 	/*
diff --git linux-libre-5.10-gnu1/arch/alpha/kernel/smp.c linux-libre-5.10.108-gnu1/arch/alpha/kernel/smp.c
index f4dd9f3f3001..cb64e4797d2a 100644
--- linux-libre-5.10-gnu1/arch/alpha/kernel/smp.c
+++ linux-libre-5.10.108-gnu1/arch/alpha/kernel/smp.c
@@ -166,7 +166,6 @@ smp_callin(void)
 	DBGS(("smp_callin: commencing CPU %d current %p active_mm %p\n",
 	      cpuid, current, current->active_mm));
 
-	preempt_disable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
@@ -583,7 +582,7 @@ void
 smp_send_stop(void)
 {
 	cpumask_t to_whom;
-	cpumask_copy(&to_whom, cpu_possible_mask);
+	cpumask_copy(&to_whom, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &to_whom);
 #ifdef DEBUG_IPI_MSG
 	if (hard_smp_processor_id() != boot_cpu_id)
diff --git linux-libre-5.10-gnu1/arch/arc/Makefile linux-libre-5.10.108-gnu1/arch/arc/Makefile
index 0c6bf0d1df7a..578bdbbb0fa7 100644
--- linux-libre-5.10-gnu1/arch/arc/Makefile
+++ linux-libre-5.10.108-gnu1/arch/arc/Makefile
@@ -102,16 +102,22 @@ libs-y		+= arch/arc/lib/ $(LIBGCC)
 
 boot		:= arch/arc/boot
 
-#default target for make without any arguments.
-KBUILD_IMAGE	:= $(boot)/bootpImage
-
-all:	bootpImage
-bootpImage: vmlinux
-
-boot_targets += uImage uImage.bin uImage.gz
+boot_targets := uImage.bin uImage.gz uImage.lzma
 
+PHONY += $(boot_targets)
 $(boot_targets): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
+uimage-default-y			:= uImage.bin
+uimage-default-$(CONFIG_KERNEL_GZIP)	:= uImage.gz
+uimage-default-$(CONFIG_KERNEL_LZMA)	:= uImage.lzma
+
+PHONY += uImage
+uImage: $(uimage-default-y)
+	@ln -sf $< $(boot)/uImage
+	@$(kecho) '  Image $(boot)/uImage is ready'
+
+CLEAN_FILES += $(boot)/uImage
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
diff --git linux-libre-5.10-gnu1/arch/arc/boot/Makefile linux-libre-5.10.108-gnu1/arch/arc/boot/Makefile
index 538b92f4dd25..3b1f8a69a89e 100644
--- linux-libre-5.10-gnu1/arch/arc/boot/Makefile
+++ linux-libre-5.10.108-gnu1/arch/arc/boot/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-targets := vmlinux.bin vmlinux.bin.gz uImage
+targets := vmlinux.bin vmlinux.bin.gz
 
 # uImage build relies on mkimage being availble on your host for ARC target
 # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
@@ -13,11 +13,6 @@ LINUX_START_TEXT = $$(readelf -h vmlinux | \
 UIMAGE_LOADADDR    = $(CONFIG_LINUX_LINK_BASE)
 UIMAGE_ENTRYADDR   = $(LINUX_START_TEXT)
 
-suffix-y := bin
-suffix-$(CONFIG_KERNEL_GZIP)	:= gz
-suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
-
-targets += uImage
 targets += uImage.bin
 targets += uImage.gz
 targets += uImage.lzma
@@ -42,7 +37,3 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
 
 $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
 	$(call if_changed,uimage,lzma)
-
-$(obj)/uImage: $(obj)/uImage.$(suffix-y)
-	@ln -sf $(notdir $<) $@
-	@echo '  Image $@ is ready'
diff --git linux-libre-5.10-gnu1/arch/arc/include/asm/Kbuild linux-libre-5.10.108-gnu1/arch/arc/include/asm/Kbuild
index 81f4edec0c2a..3c1afa524b9c 100644
--- linux-libre-5.10-gnu1/arch/arc/include/asm/Kbuild
+++ linux-libre-5.10.108-gnu1/arch/arc/include/asm/Kbuild
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 generic-y += extable.h
 generic-y += kvm_para.h
-generic-y += local64.h
 generic-y += mcs_spinlock.h
 generic-y += parport.h
 generic-y += user.h
diff --git linux-libre-5.10-gnu1/arch/arc/include/asm/page.h linux-libre-5.10.108-gnu1/arch/arc/include/asm/page.h
index b0dfed0f12be..9926cd5a17b0 100644
--- linux-libre-5.10-gnu1/arch/arc/include/asm/page.h
+++ linux-libre-5.10.108-gnu1/arch/arc/include/asm/page.h
@@ -7,9 +7,22 @@
 
 #include <uapi/asm/page.h>
 
+#ifdef CONFIG_ARC_HAS_PAE40
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	40
+#define PAGE_MASK_PHYS			(0xff00000000ull | PAGE_MASK)
+
+#else /* CONFIG_ARC_HAS_PAE40 */
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+#define PAGE_MASK_PHYS			PAGE_MASK
+
+#endif /* CONFIG_ARC_HAS_PAE40 */
+
 #ifndef __ASSEMBLY__
 
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
 #define copy_page(to, from)		memcpy((to), (from), PAGE_SIZE)
 
 struct vm_area_struct;
diff --git linux-libre-5.10-gnu1/arch/arc/include/asm/pgtable.h linux-libre-5.10.108-gnu1/arch/arc/include/asm/pgtable.h
index 163641726a2b..5878846f00cf 100644
--- linux-libre-5.10-gnu1/arch/arc/include/asm/pgtable.h
+++ linux-libre-5.10.108-gnu1/arch/arc/include/asm/pgtable.h
@@ -107,8 +107,8 @@
 #define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE)
 
 /* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_SPECIAL)
-
+#define _PAGE_CHG_MASK	(PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \
+							   _PAGE_SPECIAL)
 /* More Abbrevaited helpers */
 #define PAGE_U_NONE     __pgprot(___DEF)
 #define PAGE_U_R        __pgprot(___DEF | _PAGE_READ)
@@ -132,13 +132,7 @@
 #define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
 #define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
 
-#ifdef CONFIG_ARC_HAS_PAE40
-#define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
-#define MAX_POSSIBLE_PHYSMEM_BITS 40
-#else
-#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
-#define MAX_POSSIBLE_PHYSMEM_BITS 32
-#endif
+#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
 
 /**************************************************************************
  * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
diff --git linux-libre-5.10-gnu1/arch/arc/include/uapi/asm/page.h linux-libre-5.10.108-gnu1/arch/arc/include/uapi/asm/page.h
index 2a97e2718a21..2a4ad619abfb 100644
--- linux-libre-5.10-gnu1/arch/arc/include/uapi/asm/page.h
+++ linux-libre-5.10.108-gnu1/arch/arc/include/uapi/asm/page.h
@@ -33,5 +33,4 @@
 
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
-
 #endif /* _UAPI__ASM_ARC_PAGE_H */
diff --git linux-libre-5.10-gnu1/arch/arc/include/uapi/asm/sigcontext.h linux-libre-5.10.108-gnu1/arch/arc/include/uapi/asm/sigcontext.h
index 95f8a4380e11..7a5449dfcb29 100644
--- linux-libre-5.10-gnu1/arch/arc/include/uapi/asm/sigcontext.h
+++ linux-libre-5.10.108-gnu1/arch/arc/include/uapi/asm/sigcontext.h
@@ -18,6 +18,7 @@
  */
 struct sigcontext {
 	struct user_regs_struct regs;
+	struct user_regs_arcv2 v2abi;
 };
 
 #endif /* _ASM_ARC_SIGCONTEXT_H */
diff --git linux-libre-5.10-gnu1/arch/arc/kernel/entry.S linux-libre-5.10.108-gnu1/arch/arc/kernel/entry.S
index ea00c8a17f07..ae656bfc31c3 100644
--- linux-libre-5.10-gnu1/arch/arc/kernel/entry.S
+++ linux-libre-5.10.108-gnu1/arch/arc/kernel/entry.S
@@ -177,7 +177,7 @@ tracesys:
 
 	; Do the Sys Call as we normally would.
 	; Validate the Sys Call number
-	cmp     r8,  NR_syscalls
+	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     tracesys_exit
 
@@ -255,7 +255,7 @@ ENTRY(EV_Trap)
 	;============ Normal syscall case
 
 	; syscall num shd not exceed the total system calls avail
-	cmp     r8,  NR_syscalls
+	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     .Lret_from_system_call
 
diff --git linux-libre-5.10-gnu1/arch/arc/kernel/fpu.c linux-libre-5.10.108-gnu1/arch/arc/kernel/fpu.c
index c67c0f0f5f77..ec640219d989 100644
--- linux-libre-5.10-gnu1/arch/arc/kernel/fpu.c
+++ linux-libre-5.10.108-gnu1/arch/arc/kernel/fpu.c
@@ -57,23 +57,26 @@ void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
 
 void fpu_init_task(struct pt_regs *regs)
 {
+	const unsigned int fwe = 0x80000000;
+
 	/* default rounding mode */
 	write_aux_reg(ARC_REG_FPU_CTRL, 0x100);
 
-	/* set "Write enable" to allow explicit write to exception flags */
-	write_aux_reg(ARC_REG_FPU_STATUS, 0x80000000);
+	/* Initialize to zero: setting requires FWE be set */
+	write_aux_reg(ARC_REG_FPU_STATUS, fwe);
 }
 
 void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
 {
 	struct arc_fpu *save = &prev->thread.fpu;
 	struct arc_fpu *restore = &next->thread.fpu;
+	const unsigned int fwe = 0x80000000;
 
 	save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL);
 	save->status = read_aux_reg(ARC_REG_FPU_STATUS);
 
 	write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl);
-	write_aux_reg(ARC_REG_FPU_STATUS, restore->status);
+	write_aux_reg(ARC_REG_FPU_STATUS, (fwe | restore->status));
 }
 
 #endif
diff --git linux-libre-5.10-gnu1/arch/arc/kernel/signal.c linux-libre-5.10.108-gnu1/arch/arc/kernel/signal.c
index 2be55fb96d87..9d5996e014c0 100644
--- linux-libre-5.10-gnu1/arch/arc/kernel/signal.c
+++ linux-libre-5.10.108-gnu1/arch/arc/kernel/signal.c
@@ -61,6 +61,41 @@ struct rt_sigframe {
 	unsigned int sigret_magic;
 };
 
+static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	v2abi.r30 = regs->r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	v2abi.r58 = regs->r58;
+	v2abi.r59 = regs->r59;
+#else
+	v2abi.r58 = v2abi.r59 = 0;
+#endif
+	err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi));
+#endif
+	return err;
+}
+
+static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	err = __copy_from_user(&v2abi, &mctx->v2abi, sizeof(v2abi));
+
+	regs->r30 = v2abi.r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	regs->r58 = v2abi.r58;
+	regs->r59 = v2abi.r59;
+#endif
+#endif
+	return err;
+}
+
 static int
 stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 	       sigset_t *set)
@@ -94,9 +129,13 @@ stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 
 	err = __copy_to_user(&(sf->uc.uc_mcontext.regs.scratch), &uregs.scratch,
 			     sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= save_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
 	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t));
 
-	return err;
+	return err ? -EFAULT : 0;
 }
 
 static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
@@ -109,8 +148,12 @@ static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
 	err |= __copy_from_user(&uregs.scratch,
 				&(sf->uc.uc_mcontext.regs.scratch),
 				sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= restore_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
 	if (err)
-		return err;
+		return -EFAULT;
 
 	set_current_blocked(&set);
 	regs->bta	= uregs.scratch.bta;
diff --git linux-libre-5.10-gnu1/arch/arc/kernel/smp.c linux-libre-5.10.108-gnu1/arch/arc/kernel/smp.c
index 52906d314537..db0e104d6835 100644
--- linux-libre-5.10-gnu1/arch/arc/kernel/smp.c
+++ linux-libre-5.10.108-gnu1/arch/arc/kernel/smp.c
@@ -189,7 +189,6 @@ void start_kernel_secondary(void)
 	pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
 
 	local_irq_enable();
-	preempt_disable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
diff --git linux-libre-5.10-gnu1/arch/arc/kernel/vmlinux.lds.S linux-libre-5.10.108-gnu1/arch/arc/kernel/vmlinux.lds.S
index 33ce59d91461..f67e4ad7b3ce 100644
--- linux-libre-5.10-gnu1/arch/arc/kernel/vmlinux.lds.S
+++ linux-libre-5.10.108-gnu1/arch/arc/kernel/vmlinux.lds.S
@@ -88,6 +88,8 @@ SECTIONS
 		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 	}
diff --git linux-libre-5.10-gnu1/arch/arc/mm/cache.c linux-libre-5.10.108-gnu1/arch/arc/mm/cache.c
index a2fbea3ee07c..102418ac5ff4 100644
--- linux-libre-5.10-gnu1/arch/arc/mm/cache.c
+++ linux-libre-5.10.108-gnu1/arch/arc/mm/cache.c
@@ -1123,7 +1123,7 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
 	clear_page(to);
 	clear_bit(PG_dc_clean, &page->flags);
 }
-
+EXPORT_SYMBOL(clear_user_page);
 
 /**********************************************************************
  * Explicit Cache flush request from user space via syscall
diff --git linux-libre-5.10-gnu1/arch/arc/mm/init.c linux-libre-5.10.108-gnu1/arch/arc/mm/init.c
index 3a35b82a718e..da543fd422fe 100644
--- linux-libre-5.10-gnu1/arch/arc/mm/init.c
+++ linux-libre-5.10.108-gnu1/arch/arc/mm/init.c
@@ -158,7 +158,16 @@ void __init setup_arch_memory(void)
 	min_high_pfn = PFN_DOWN(high_mem_start);
 	max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
 
-	max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
+	/*
+	 * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
+	 * For HIGHMEM without PAE max_high_pfn should be less than
+	 * min_low_pfn to guarantee that these two regions don't overlap.
+	 * For PAE case highmem is greater than lowmem, so it is natural
+	 * to use max_high_pfn.
+	 *
+	 * In both cases, holes should be handled by pfn_valid().
+	 */
+	max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
 
 	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
 	kmap_init();
diff --git linux-libre-5.10-gnu1/arch/arc/mm/ioremap.c linux-libre-5.10.108-gnu1/arch/arc/mm/ioremap.c
index fac4adc90204..95c649fbc95a 100644
--- linux-libre-5.10-gnu1/arch/arc/mm/ioremap.c
+++ linux-libre-5.10.108-gnu1/arch/arc/mm/ioremap.c
@@ -53,9 +53,10 @@ EXPORT_SYMBOL(ioremap);
 void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 			   unsigned long flags)
 {
+	unsigned int off;
 	unsigned long vaddr;
 	struct vm_struct *area;
-	phys_addr_t off, end;
+	phys_addr_t end;
 	pgprot_t prot = __pgprot(flags);
 
 	/* Don't allow wraparound, zero size */
@@ -72,7 +73,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 
 	/* Mappings have to be page-aligned */
 	off = paddr & ~PAGE_MASK;
-	paddr &= PAGE_MASK;
+	paddr &= PAGE_MASK_PHYS;
 	size = PAGE_ALIGN(end + 1) - paddr;
 
 	/*
diff --git linux-libre-5.10-gnu1/arch/arc/mm/tlb.c linux-libre-5.10.108-gnu1/arch/arc/mm/tlb.c
index 9bb3c24f3677..9c7c68247289 100644
--- linux-libre-5.10-gnu1/arch/arc/mm/tlb.c
+++ linux-libre-5.10.108-gnu1/arch/arc/mm/tlb.c
@@ -576,7 +576,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
 		      pte_t *ptep)
 {
 	unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
-	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK;
+	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
 	struct page *page = pfn_to_page(pte_pfn(*ptep));
 
 	create_tlb(vma, vaddr, ptep);
diff --git linux-libre-5.10-gnu1/arch/arm/Kconfig linux-libre-5.10.108-gnu1/arch/arm/Kconfig
index 002e0cf025f5..a0eac00e2c81 100644
--- linux-libre-5.10-gnu1/arch/arm/Kconfig
+++ linux-libre-5.10.108-gnu1/arch/arm/Kconfig
@@ -87,6 +87,7 @@ config ARM
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
 	select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_IDE if PCI || ISA || PCMCIA
diff --git linux-libre-5.10-gnu1/arch/arm/Kconfig.debug linux-libre-5.10.108-gnu1/arch/arm/Kconfig.debug
index 8986a91a6f31..dd1cf7035398 100644
--- linux-libre-5.10-gnu1/arch/arm/Kconfig.debug
+++ linux-libre-5.10.108-gnu1/arch/arm/Kconfig.debug
@@ -400,12 +400,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -1523,7 +1523,7 @@ config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection"
 	depends on DEBUG_IMX1_UART || \
 		   DEBUG_IMX25_UART || \
-		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX27_UART || \
 		   DEBUG_IMX31_UART || \
 		   DEBUG_IMX35_UART || \
 		   DEBUG_IMX50_UART || \
@@ -1591,12 +1591,12 @@ config DEBUG_LL_INCLUDE
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
diff --git linux-libre-5.10-gnu1/arch/arm/Makefile linux-libre-5.10.108-gnu1/arch/arm/Makefile
index e15f76ca2887..0e5a8765e60b 100644
--- linux-libre-5.10-gnu1/arch/arm/Makefile
+++ linux-libre-5.10.108-gnu1/arch/arm/Makefile
@@ -60,15 +60,15 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m
+arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 -march=armv7-a
+arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 -march=armv6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 -march=armv6k
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 -march=armv5te
 arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
 arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3m
@@ -82,7 +82,7 @@ tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)	=-mtune=arm9e
 tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
@@ -90,11 +90,11 @@ tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_XSCALE)	=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		=-mtune=arm1136j-s
 
 # Evaluate tune cc-option calls now
 tune-y := $(tune-y)
diff --git linux-libre-5.10-gnu1/arch/arm/boot/compressed/Makefile linux-libre-5.10.108-gnu1/arch/arm/boot/compressed/Makefile
index e1567418a2b1..175213d7a1aa 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/compressed/Makefile
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/compressed/Makefile
@@ -84,6 +84,8 @@ compress-$(CONFIG_KERNEL_LZ4)  = lz4
 libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o
 
 ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
 
@@ -114,8 +116,8 @@ asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
 KBSS_SZ = $(shell echo $$(($$($(NM) $(obj)/../../../../vmlinux | \
-		sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
-		       -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
+		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
diff --git linux-libre-5.10-gnu1/arch/arm/boot/compressed/atags_to_fdt.c linux-libre-5.10.108-gnu1/arch/arm/boot/compressed/atags_to_fdt.c
index 8452753efebe..31927d2fe297 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/compressed/atags_to_fdt.c
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/compressed/atags_to_fdt.c
@@ -15,7 +15,8 @@ static int node_offset(void *fdt, const char *node_path)
 {
 	int offset = fdt_path_offset(fdt, node_path);
 	if (offset == -FDT_ERR_NOTFOUND)
-		offset = fdt_add_subnode(fdt, 0, node_path);
+		/* Add the node to root if not found, dropping the leading '/' */
+		offset = fdt_add_subnode(fdt, 0, node_path + 1);
 	return offset;
 }
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/compressed/decompress.c linux-libre-5.10.108-gnu1/arch/arm/boot/compressed/decompress.c
index aa075d8372ea..74255e819831 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/compressed/decompress.c
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/compressed/decompress.c
@@ -47,7 +47,10 @@ extern char * strchrnul(const char *, int);
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif
diff --git linux-libre-5.10-gnu1/arch/arm/boot/compressed/efi-header.S linux-libre-5.10.108-gnu1/arch/arm/boot/compressed/efi-header.S
index c0e7a745103e..230030c13085 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/compressed/efi-header.S
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/compressed/efi-header.S
@@ -9,16 +9,22 @@
 #include <linux/sizes.h>
 
 		.macro	__nop
-#ifdef CONFIG_EFI_STUB
-		@ This is almost but not quite a NOP, since it does clobber the
-		@ condition flags. But it is the best we can do for EFI, since
-		@ PE/COFF expects the magic string "MZ" at offset 0, while the
-		@ ARM/Linux boot protocol expects an executable instruction
-		@ there.
-		.inst	MZ_MAGIC | (0x1310 << 16)	@ tstne r0, #0x4d000
-#else
  AR_CLASS(	mov	r0, r0		)
   M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	MZ_MAGIC | (0xe225 << 16)	@ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
 #endif
 		.endm
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/compressed/head.S linux-libre-5.10.108-gnu1/arch/arm/boot/compressed/head.S
index caa27322a0ab..7a38c63b62bf 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/compressed/head.S
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/compressed/head.S
@@ -116,7 +116,7 @@
 		/*
 		 * Debug print of the final appended DTB location
 		 */
-		.macro dbgadtb, begin, end
+		.macro dbgadtb, begin, size
 #ifdef DEBUG
 		kputc   #'D'
 		kputc   #'T'
@@ -129,7 +129,7 @@
 		kputc	#'('
 		kputc	#'0'
 		kputc	#'x'
-		kphex	\end, 8		/* End of appended DTB */
+		kphex	\size, 8	/* Size of appended DTB */
 		kputc	#')'
 		kputc	#'\n'
 #endif
@@ -190,7 +190,8 @@ start:
 		 * were patching the initial instructions of the kernel, i.e
 		 * had started to exploit this "patch area".
 		 */
-		.rept	7
+		__initial_nops
+		.rept	5
 		__nop
 		.endr
 #ifndef CONFIG_THUMB2_KERNEL
@@ -1175,9 +1176,9 @@ __armv4_mmu_cache_off:
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
 #ifdef CONFIG_MMU
-		bic	r0, r0, #0x000d
+		bic	r0, r0, #0x0005
 #else
-		bic	r0, r0, #0x000c
+		bic	r0, r0, #0x0004
 #endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r0, #0
@@ -1440,8 +1441,7 @@ ENTRY(efi_enter_kernel)
 		mov	r4, r0			@ preserve image base
 		mov	r8, r1			@ preserve DT pointer
 
- ARM(		adrl	r0, call_cache_fn	)
- THUMB(		adr	r0, call_cache_fn	)
+		adr_l	r0, call_cache_fn
 		adr	r1, 0f			@ clean the region of code we
 		bl	cache_clean_flush	@ may run with the MMU off
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/Makefile linux-libre-5.10.108-gnu1/arch/arm/boot/dts/Makefile
index ce66ffd5a1bb..7e8151681597 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/Makefile
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/Makefile
@@ -731,6 +731,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-beagle-xm-ab.dtb \
 	omap3-cm-t3517.dtb \
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-baltos.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am335x-baltos.dtsi
index b7f64c7ba83d..77e23e736854 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-baltos.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -393,10 +393,10 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
-&gpio3 {
+&gpio3_target {
 	ti,no-reset-on-init;
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-cm-t335.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am335x-cm-t335.dts
index c6fe9db660e2..08c89f176845 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-cm-t335.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -496,7 +496,7 @@ status = "okay";
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 	/* WLS1271 WiFi */
 	wlcore: wlcore@1 {
 		compatible = "ti,wl1271";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-evmsk.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am335x-evmsk.dts
index b43b94122d3c..bf05b68274c2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-evmsk.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am335x-evmsk.dts
@@ -648,7 +648,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 4e90f9c23d2e..8121a199607c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -150,7 +150,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index 98d8ed4ad967..39e5d2ce600a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -353,7 +353,7 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am33xx-l4.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am33xx-l4.dtsi
index ea20e4bdf040..29fafb67cfaa 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am33xx-l4.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -1723,7 +1723,7 @@
 			};
 		};
 
-		target-module@ae000 {			/* 0x481ae000, ap 56 3a.0 */
+		gpio3_target: target-module@ae000 {		/* 0x481ae000, ap 56 3a.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0xae000 0x4>,
 			      <0xae010 0x4>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am33xx.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am33xx.dtsi
index 061858988e99..e14dcb4bbcb6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am33xx.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am33xx.dtsi
@@ -40,6 +40,9 @@
 		ethernet1 = &cpsw_emac1;
 		spi0 = &spi0;
 		spi1 = &spi1;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 	};
 
 	cpus {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am437x-gp-evm.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am437x-gp-evm.dts
index 6e4d05d649e9..033b984ff637 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am437x-gp-evm.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -813,11 +813,14 @@
 	status = "okay";
 };
 
+&gpio5_target {
+	ti,no-reset-on-init;
+};
+
 &gpio5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
-	ti,no-reset-on-init;
 
 	p8 {
 		/*
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am437x-l4.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am437x-l4.dtsi
index 243e35f7a56c..86bf668f3848 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am437x-l4.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1576,7 +1576,7 @@
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
 				clocks = <&dcan1_fck>;
-				clock-name = "fck";
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 1>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -2033,7 +2033,7 @@
 			};
 		};
 
-		target-module@22000 {			/* 0x48322000, ap 116 64.0 */
+		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x22000 0x4>,
 			      <0x22010 0x4>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am43x-epos-evm.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am43x-epos-evm.dts
index f517d1e843cf..d2aebdbc7e0f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am43x-epos-evm.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -582,7 +582,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;
@@ -860,7 +860,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&spi0_pins_default>;
 	pinctrl-1 = <&spi0_pins_sleep>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 };
 
 &spi1 {
@@ -868,7 +868,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&spi1_pins_default>;
 	pinctrl-1 = <&spi1_pins_sleep>;
-	ti,pindir-d0-out-d1-in = <1>;
+	ti,pindir-d0-out-d1-in;
 };
 
 &usb2_phy1 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am5718.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am5718.dtsi
index ebf4d3cc1cfb..6d7530a48c73 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am5718.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am5718.dtsi
@@ -17,17 +17,13 @@
  * VCP1, VCP2
  * MLB
  * ISS
- * USB3, USB4
+ * USB3
  */
 
 &usb3_tm {
 	status = "disabled";
 };
 
-&usb4_tm {
-	status = "disabled";
-};
-
 &atl_tm {
 	status = "disabled";
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/am57xx-cl-som-am57x.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 0d5fe2bfb683..aed81568a297 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -454,20 +454,20 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
@@ -610,12 +610,11 @@
 	>;
 };
 
-&gpio3 {
-	status = "okay";
+&gpio3_target {
 	ti,no-reset-on-init;
 };
 
-&gpio2 {
+&gpio2_target {
 	status = "okay";
 	ti,no-reset-on-init;
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-385-turris-omnia.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 768b6c5d2129..fde4c302f08e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -236,6 +236,7 @@
 		status = "okay";
 		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		marvell,reg-init = <3 18 0 0x4985>;
 
 		/* irq is connected to &pcawan pin 7 */
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-388-helios4.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/armada-388-helios4.dts
index fb49df2a3bce..a7ff774d797c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-388-helios4.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/armada-388-helios4.dts
@@ -70,6 +70,9 @@
 
 	system-leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_system_led_pins>;
+
 		status-led {
 			label = "helios4:green:status";
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
@@ -86,6 +89,9 @@
 
 	io-leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_io_led_pins>;
+
 		sata1-led {
 			label = "helios4:green:ata1";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
@@ -121,11 +127,15 @@
 	fan1: j10-pwm {
 		compatible = "pwm-fan";
 		pwms = <&gpio1 9 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan1_pins>;
 	};
 
 	fan2: j17-pwm {
 		compatible = "pwm-fan";
 		pwms = <&gpio1 23 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan2_pins>;
 	};
 
 	usb2_phy: usb2-phy {
@@ -286,16 +296,22 @@
 						       "mpp39", "mpp40";
 					marvell,function = "sd0";
 				};
-				helios_led_pins: helios-led-pins {
-					marvell,pins = "mpp24", "mpp25",
-						       "mpp49", "mpp50",
+				helios_system_led_pins: helios-system-led-pins {
+					marvell,pins = "mpp24", "mpp25";
+					marvell,function = "gpio";
+				};
+				helios_io_led_pins: helios-io-led-pins {
+					marvell,pins = "mpp49", "mpp50",
 						       "mpp52", "mpp53",
 						       "mpp54";
 					marvell,function = "gpio";
 				};
-				helios_fan_pins: helios-fan-pins {
-					marvell,pins = "mpp41", "mpp43",
-						       "mpp48", "mpp55";
+				helios_fan1_pins: helios_fan1_pins {
+					marvell,pins = "mpp41", "mpp43";
+					marvell,function = "gpio";
+				};
+				helios_fan2_pins: helios_fan2_pins {
+					marvell,pins = "mpp48", "mpp55";
 					marvell,function = "gpio";
 				};
 				microsom_spi1_cs_pins: spi1-cs-pins {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-38x.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/armada-38x.dtsi
index 9b1a24cc5e91..df3c8d1d8f64 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-38x.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/armada-38x.dtsi
@@ -168,7 +168,7 @@
 			};
 
 			uart0: serial@12000 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -178,7 +178,7 @@
 			};
 
 			uart1: serial@12100 {
-				compatible = "marvell,armada-38x-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-xp-98dx3236.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index 654648b05c7c..aeccedd12574 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -266,11 +266,6 @@
 	reg = <0x11000 0x100>;
 };
 
-&i2c1 {
-	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-	reg = <0x11100 0x100>;
-};
-
 &mpic {
 	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
index 2d44d9ad4e40..e6ad821a8635 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -82,11 +82,6 @@
 	status = "okay";
 };
 
-&vuart {
-	// VUART Host Console
-	status = "okay";
-};
-
 &uart1 {
 	// Host Console
 	status = "okay";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 21ae880c7530..5a4e137fec21 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -156,10 +156,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","","";
 
 	pin_mclr_vpp {
 		gpio-hog;
@@ -707,9 +704,9 @@
 	multi-master;
 	status = "okay";
 
-	si7021-a20@20 {
+	si7021-a20@40 {
 		compatible = "silabs,si7020";
-		reg = <0x20>;
+		reg = <0x40>;
 	};
 
 	tmp275@48 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
index 1deb30ec912c..6e9baf3bba53 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
@@ -22,9 +22,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		vga_memory: framebuffer@7f000000 {
+		vga_memory: framebuffer@9f000000 {
 			no-map;
-			reg = <0x7f000000 0x01000000>;
+			reg = <0x9f000000 0x01000000>; /* 16M */
 		};
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index 4d070d6ba09f..0e8851cec979 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -26,7 +26,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		flash_memory: region@ba000000 {
+		flash_memory: region@b8000000 {
 			no-map;
 			reg = <0xb8000000 0x4000000>; /* 64M */
 		};
@@ -127,10 +127,7 @@
 	/*W0-W7*/	"","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
 	/*Y0-Y7*/	"","","","","","","","",
-	/*Z0-Z7*/	"","","","","","","","",
-	/*AA0-AA7*/	"","","","","","","","",
-	/*AB0-AB7*/	"","","","","","","","",
-	/*AC0-AC7*/	"","","","","","","","";
+	/*Z0-Z7*/	"","","","","","","","";
 };
 
 &fmc {
@@ -180,6 +177,7 @@
 
 &emmc {
 	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
 };
 
 &fsim0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g4.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-g4.dtsi
index 82f0213e3a3c..f81a540a3529 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g4.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -370,6 +370,7 @@
 						compatible = "aspeed,ast2400-lpc-snoop";
 						reg = <0x10 0x8>;
 						interrupts = <8>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g5.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-g5.dtsi
index a93009aa2f04..39e690be1704 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g5.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -492,6 +492,7 @@
 						compatible = "aspeed,ast2500-lpc-snoop";
 						reg = <0x10 0x8>;
 						interrupts = <8>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 7028e21bdd98..a362714ae9fc 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -118,7 +118,7 @@
 	};
 
 	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
+		function = "FWSPID";
 		groups = "FWQSPID";
 	};
 
@@ -208,12 +208,12 @@
 	};
 
 	pinctrl_hvi3c3_default: hvi3c3_default {
-		function = "HVI3C3";
+		function = "I3C3";
 		groups = "HVI3C3";
 	};
 
 	pinctrl_hvi3c4_default: hvi3c4_default {
-		function = "HVI3C4";
+		function = "I3C4";
 		groups = "HVI3C4";
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g6.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-g6.dtsi
index b58220a49cbd..1cf71bdb4fab 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/aspeed-g6.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -357,7 +357,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				compatible = "aspeed,ast2600-gpio";
-				reg = <0x1e780000 0x800>;
+				reg = <0x1e780000 0x400>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-ranges = <&pinctrl 0 0 208>;
 				ngpios = <208>;
@@ -513,6 +513,7 @@
 						compatible = "aspeed,ast2600-lpc-snoop";
 						reg = <0x0 0x80>;
 						interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 						status = "disabled";
 					};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-kizbox3_common.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index 7c3076e245ef..dc77d8e80e56 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -336,7 +336,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sam9x60ek.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sam9x60ek.dts
index eae28b82c7fd..b1068cca4228 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAM9X60-EK";
@@ -84,13 +85,15 @@
 		sw1 {
 			label = "SW1";
 			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-			linux,code=<0x104>;
+			linux,code=<KEY_PROG1>;
 			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay"; /* Conflict with pwm0. */
 
 		red {
@@ -334,14 +337,6 @@
 };
 
 &pinctrl {
-	atmel,mux-mask = <
-			 /*	A	B	C	*/
-			 0xFFFFFE7F 0xC0E0397F 0xEF00019D	/* pioA */
-			 0x03FFFFFF 0x02FC7E68 0x00780000	/* pioB */
-			 0xffffffff 0xF83FFFFF 0xB800F3FC	/* pioC */
-			 0x003FFFFF 0x003F8000 0x00000000	/* pioD */
-			 >;
-
 	adc {
 		pinctrl_adc_default: adc_default {
 			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
@@ -544,6 +539,10 @@
 				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
 				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
 		};
+		pinctrl_sdmmc0_cd: sdmmc0_cd {
+			atmel,pins =
+				<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
 	};
 
 	sdmmc1 {
@@ -569,11 +568,22 @@
 			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
 		};
 	};
-}; /* pinctrl */
 
-&pmc {
-	atmel,osc-bypass;
-};
+	usb1 {
+		pinctrl_usb_default: usb_default {
+			atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio_leds {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
 
 &pwm0 {
 	pinctrl-names = "default";
@@ -584,7 +594,7 @@
 &sdmmc0 {
 	bus-width = <4>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
 	status = "okay";
 	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
 	disable-wp;
@@ -652,7 +662,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	status = "okay";
 
 	input@0 {
@@ -684,6 +694,8 @@
 	atmel,vbus-gpio = <0
 			   &pioD 15 GPIO_ACTIVE_HIGH
 			   &pioD 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
 	status = "okay";
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_som1.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index b1f994c0ae79..e4824abb385a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -84,8 +84,8 @@
 				pinctrl-0 = <&pinctrl_macb0_default>;
 				phy-mode = "rmii";
 
-				ethernet-phy@0 {
-					reg = <0x0>;
+				ethernet-phy@7 {
+					reg = <0x7>;
 					interrupt-parent = <&pioA>;
 					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
 					pinctrl-names = "default";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 0e159f879c15..0a53f21a8903 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -11,6 +11,7 @@
 #include "at91-sama5d27_som1.dtsi"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel SAMA5D27 SOM1 EK";
@@ -70,7 +71,6 @@
 			isc: isc@f0008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
-				status = "okay";
 			};
 
 			qspi1: spi@f0024000 {
@@ -137,7 +137,7 @@
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
 				input@0 {
@@ -467,7 +467,7 @@
 		pb4 {
 			label = "USER";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 6b38fa3f5568..20bcb7480d2e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -8,6 +8,7 @@
  */
 /dts-v1/;
 #include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Microchip SAMA5D27 WLSOM1 EK";
@@ -35,7 +36,7 @@
 		sw4 {
 			label = "USER BUTTON";
 			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
@@ -204,7 +205,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d2_icp.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d2_icp.dts
index 6783cf16ff81..308d472bd104 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d2_icp.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -12,6 +12,7 @@
 #include "sama5d2.dtsi"
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/mfd/atmel-flexcom.h>
 
 / {
@@ -51,7 +52,7 @@
 		sw4 {
 			label = "USER_PB1";
 			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
@@ -692,7 +693,7 @@
 };
 
 &shutdown_controller {
-	atmel,shdwc-debouncer = <976>;
+	debounce-delay-us = <976>;
 	atmel,wakeup-rtc-timer;
 
 	input@0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index c894c7c788a9..317c6ddb5677 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -11,6 +11,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/at91.h>
 
 / {
@@ -202,7 +203,7 @@
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 
 				input@0 {
 					reg = <0>;
@@ -403,7 +404,7 @@
 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d2_xplained.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 058fae1b4a76..08c5182ba86b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -10,6 +10,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
 
 / {
@@ -346,7 +347,7 @@
 			};
 
 			shdwc@f8048010 {
-				atmel,shdwc-debouncer = <976>;
+				debounce-delay-us = <976>;
 				atmel,wakeup-rtc-timer;
 
 				input@0 {
@@ -713,7 +714,7 @@
 		bp1 {
 			label = "PB_USER";
 			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d3_xplained.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index cf13632edd44..cc55d1684322 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "SAMA5D3 Xplained";
@@ -56,6 +57,8 @@
 			};
 
 			spi0: spi@f0004000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -168,6 +171,8 @@
 			};
 
 			spi1: spi@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
@@ -242,6 +247,31 @@
 						atmel,pins =
 							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
 					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+						atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
@@ -259,6 +289,8 @@
 					   &pioE 3 GPIO_ACTIVE_LOW
 					   &pioE 4 GPIO_ACTIVE_LOW
 					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
 		};
 
@@ -331,6 +363,8 @@
 
 	vcc_mmc0_reg: fixedregulator_mmc0 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
 		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
 		regulator-name = "mmc0-card-supply";
 		regulator-min-microvolt = <3300000>;
@@ -347,13 +381,16 @@
 		bp3 {
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
 
 		d2 {
 			label = "d2";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d4_xplained.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index e5974a17374c..e42dae06b582 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -90,6 +90,8 @@
 			};
 
 			spi1: spi@fc018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
@@ -134,6 +136,11 @@
 						atmel,pins =
 							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
 					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_key_gpio: key_gpio_0 {
 						atmel,pins =
 							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
@@ -142,6 +149,19 @@
 						atmel,pins =
 							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
+						atmel,pins =
+							<AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
@@ -159,6 +179,8 @@
 					   &pioE 11 GPIO_ACTIVE_HIGH
 					   &pioE 14 GPIO_ACTIVE_HIGH
 					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
 		};
 
@@ -245,6 +267,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay";
 
 		d8 {
@@ -271,6 +295,8 @@
 
 	vcc_mmc1_reg: fixedregulator_mmc1 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
 		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
 		regulator-name = "VDD MCI1";
 		regulator-min-microvolt = <3300000>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-tse850-3.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-tse850-3.dts
index 3ca97b47c69c..7e5c598e7e68 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91-tse850-3.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91-tse850-3.dts
@@ -262,7 +262,7 @@
 &macb1 {
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rmii";
 
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91sam9260ek.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91sam9260ek.dts
index d3446e42b598..ce96345d28a3 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91sam9260ek.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91sam9260ek.dts
@@ -7,6 +7,7 @@
  */
 /dts-v1/;
 #include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel at91sam9260ek";
@@ -156,7 +157,7 @@
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91sam9g20ek_common.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 6e6e672c0b86..87bb39060e8b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -5,6 +5,7 @@
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  */
 #include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 
@@ -234,7 +235,7 @@
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
+			linux,code = <KEY_PROG1>;
 			wakeup-source;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/at91sam9rl.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91sam9rl.dtsi
index 5653e70c84b4..36a42a9fe195 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/at91sam9rl.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -282,23 +282,26 @@
 				atmel,adc-use-res = "highres";
 
 				trigger0 {
-					trigger-name = "timer-counter-0";
+					trigger-name = "external-rising";
 					trigger-value = <0x1>;
+					trigger-external;
 				};
+
 				trigger1 {
-					trigger-name = "timer-counter-1";
-					trigger-value = <0x3>;
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
 				};
 
 				trigger2 {
-					trigger-name = "timer-counter-2";
-					trigger-value = <0x5>;
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
 				};
 
 				trigger3 {
-					trigger-name = "external";
-					trigger-value = <0x13>;
-					trigger-external;
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
 				};
 			};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm-cygnus.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm-cygnus.dtsi
index dacaef2c14ca..ea3dc128b764 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -460,7 +460,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@18046000 {
+		nand_controller: nand-controller@18046000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
 			      <0x18046f00 0x20>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm-hr2.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm-hr2.dtsi
index e8df458aad39..84cda16f68a2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm-hr2.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -179,7 +179,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x26000 0x600>,
 			      <0x11b408 0x600>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm-nsp.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm-nsp.dtsi
index e895f7cb8c9f..1dae02bb82c2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm-nsp.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -219,7 +219,7 @@
 			status = "disabled";
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
@@ -269,7 +269,7 @@
 			dma-coherent;
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
 			      <0x11b408 0x600>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2711-rpi-4-b.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 09a1182c2936..167538518a1e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -28,11 +28,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
@@ -54,8 +54,8 @@
 		regulator-always-on;
 		regulator-settling-time-us = <5000>;
 		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		status = "okay";
 	};
 
@@ -255,15 +255,16 @@
 };
 
 &pcie0 {
-	pci@1,0 {
+	pci@0,0 {
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
 
 		reg = <0 0 0 0 0>;
 
-		usb@1,0 {
-			reg = <0x10000 0 0 0 0>;
+		usb@0,0 {
+			reg = <0 0 0 0 0>;
 			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2711.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2711.dtsi
index 4847dd305317..e46a3f4ad350 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2711.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2711.dtsi
@@ -290,6 +290,7 @@
 
 		hvs: hvs@7e400000 {
 			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -395,7 +396,7 @@
 		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
 		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
 
-		emmc2: emmc2@7e340000 {
+		emmc2: mmc@7e340000 {
 			compatible = "brcm,bcm2711-emmc2";
 			reg = <0x0 0x7e340000 0x100>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
@@ -480,11 +481,17 @@
 			#address-cells = <3>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pcie", "msi";
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
 							IRQ_TYPE_LEVEL_HIGH>;
 			msi-controller;
 			msi-parent = <&pcie0>;
@@ -514,8 +521,8 @@
 				compatible = "brcm,genet-mdio-v5";
 				reg = <0xe14 0x8>;
 				reg-names = "mdio";
-				#address-cells = <0x0>;
-				#size-cells = <0x1>;
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
 			};
 		};
 	};
@@ -549,6 +556,8 @@
 		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 
+	gpio-ranges = <&gpio 0 0 58>;
+
 	gpclk0_gpio49: gpclk0_gpio49 {
 		pin-gpclk {
 			pins = "gpio49";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 6c8ce39833bf..40b9405f1a8e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -14,11 +14,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-a.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 17fdd48346ff..11edb581dbaf 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -14,7 +14,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index b0355c229cdc..1b435c64bd9c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -15,11 +15,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 33b3b5c02521..a23c25c00eea 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -15,7 +15,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-b.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 2b69957e0113..1b63d6b19750 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -15,7 +15,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
index 58059c2ce129..e4e6b6abbfc1 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -5,7 +5,7 @@
 
 / {
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index f65448c01e31..33b2b77aa47d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -23,7 +23,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 6dd93c6f4966..6f9b3a908f28 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -18,7 +18,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi.dtsi
index d94357b21f7e..87ddcad76083 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -4,7 +4,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		act {
+		led-act {
 			label = "ACT";
 			default-state = "keep";
 			linux,default-trigger = "heartbeat";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2836-rpi-2-b.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 0455a680394a..d8af8eeac7b6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -15,11 +15,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index 28be0332c1c8..77099a7871b0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -19,11 +19,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 37343148643d..61010266ca9a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -20,11 +20,11 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-pwr {
 			label = "PWR";
 			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 054ecaa355c9..dd4a48604097 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -20,7 +20,7 @@
 	};
 
 	leds {
-		act {
+		led-act {
 			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 925cb37c22f0..828a20561b96 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -14,7 +14,7 @@
 		 * Since there is no upstream GPIO driver yet,
 		 * remove the incomplete node.
 		 */
-		/delete-node/ act;
+		/delete-node/ led-act;
 	};
 
 	reg_3v3: fixed-regulator {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm283x.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm283x.dtsi
index b83a864e2e8b..ffdf7c4fba46 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm283x.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm283x.dtsi
@@ -126,6 +126,8 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			gpio-ranges = <&gpio 0 0 54>;
+
 			/* Defines common pin muxing groups
 			 *
 			 * While each pin can have its mux selected
@@ -420,7 +422,7 @@
 			status = "disabled";
 		};
 
-		sdhci: sdhci@7e300000 {
+		sdhci: mmc@7e300000 {
 			compatible = "brcm,bcm2835-sdhci";
 			reg = <0x7e300000 0x100>;
 			interrupts = <2 30>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index 6a96655d8626..8ed403767540 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index 3b0029e61b4c..667b118ba4ee 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 90f57bad6b24..ff31ce45831a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	spi {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6250.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index fed75e6ab58c..7900aac4f35a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -20,10 +20,10 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 79542e18915c..4c60eda296d9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index abd35a518046..7d46561fca3c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index c29950b43a95..0e273c598732 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index 4dcec6865469..083ec4036bd7 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 0e349e39f608..8b1a05a0f1a1 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 8f1e565c3db4..7546c8d07bcd 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -19,10 +19,10 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index ce888b1835d1..beae9eab9cb8 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -19,10 +19,10 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
index ed8619b54d69..ee94455a7236 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -16,10 +16,10 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-netgear-r7000.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index 1f87993eae1d..56d309dbc6b0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -19,10 +19,10 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-netgear-r8000.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 6c6199a53d09..184e3039aa86 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -30,10 +30,10 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index f806be5da723..c2a266a439d0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -15,7 +15,7 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 911c65fbf251..e635a15041dd 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -21,8 +21,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	nand: nand@18028000 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-linksys-panamera.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 0faae8950375..36d63beba8cd 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
index 50f7cd08cfbb..a6dc99955e19 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
index bcc420f85b56..ff98837bc0db 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 9ae815ddbb4b..3d415d874bd3 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -16,10 +16,10 @@
 		bootargs = "earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index a21b2d185596..9f798025748b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 4d5c5aa7dc42..c8dfa4c58d2f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-netgear-r8500.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index f42a1703f4ab..42097a4c2659 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -18,8 +18,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-phicomm-k3.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
index ac3a4483dcb3..a2566ad4619c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
@@ -15,8 +15,8 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	gpio-keys {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm53016-meraki-mr32.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index 3b978dc8997a..577a4dc604d9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -20,7 +20,7 @@
 		bootargs = " console=ttyS0,115200n8 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x08000000>;
 		device_type = "memory";
 	};
@@ -195,3 +195,25 @@
 		};
 	};
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				duplex-full;
+			};
+		};
+	};
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm5301x.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm5301x.dtsi
index ac3a99cf2079..9fdad20c40d1 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm5301x.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm5301x.dtsi
@@ -242,6 +242,8 @@
 
 			gpio-controller;
 			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		pcie0: pcie@12000 {
@@ -408,7 +410,7 @@
 	i2c0: i2c@18009000 {
 		compatible = "brcm,iproc-i2c";
 		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clock-frequency = <100000>;
@@ -515,27 +517,27 @@
 		      <0x1811b408 0x004>,
 		      <0x180293a0 0x01c>;
 		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "spi_lr_fullness_reached",
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mspi_done",
+				  "mspi_halted",
+				  "spi_lr_fullness_reached",
 				  "spi_lr_session_aborted",
 				  "spi_lr_impatient",
 				  "spi_lr_session_done",
-				  "spi_lr_overhead",
-				  "mspi_done",
-				  "mspi_halted";
+				  "spi_lr_overread";
 		clocks = <&iprocmed>;
 		clock-names = "iprocmed";
 		num-cs = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		spi_nor: spi-nor@0 {
+		spi_nor: flash@0 {
 			compatible = "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm63138.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm63138.dtsi
index 9c0325cf9e22..cca49a2e2d62 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm63138.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm63138.dtsi
@@ -203,7 +203,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@2000 {
+		nand_controller: nand-controller@2000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 8313b7cad542..f92d2cf85972 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -14,10 +14,10 @@
 	};
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@1 {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <1>;
 		nand-ecc-step-size = <512>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm7445.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm7445.dtsi
index 58f67c9b830b..5ac2042515b8 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm7445.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm7445.dtsi
@@ -148,7 +148,7 @@
 			reg-names = "aon-ctrl", "aon-sram";
 		};
 
-		nand: nand@3e2800 {
+		nand_controller: nand-controller@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm911360_entphn.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm911360_entphn.dts
index b2d323f4a5ab..a76c74b44bba 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm911360_entphn.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -82,8 +82,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm94708.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm94708.dts
index 3d13e46c6949..d9eb2040b963 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm94708.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm94708.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94708)";
 	compatible = "brcm,bcm94708", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm94709.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm94709.dts
index 5017b7b259cb..618c812eef73 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm94709.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm94709.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94709)";
 	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958300k.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958300k.dts
index b4a1392bd5a6..dda3e11b711f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958300k.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958300k.dts
@@ -60,8 +60,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958305k.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958305k.dts
index 3378683321d3..ea3c6b88b313 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958305k.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958305k.dts
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958522er.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958522er.dts
index 7be4c4e628e0..5dd1001255c6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958522er.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958522er.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958525er.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958525er.dts
index e58ed7e95346..0e624c57b585 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958525er.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958525er.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958525xmc.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958525xmc.dts
index 21f922dc6019..2ac6d61ad297 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958525xmc.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958525xmc.dts
@@ -90,8 +90,8 @@
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958622hr.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958622hr.dts
index a49c2fd21f4a..e072fa83537a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958622hr.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958622hr.dts
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958623hr.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958623hr.dts
index dd6dff6452b8..835f4765efbc 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958623hr.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958623hr.dts
@@ -78,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958625hr.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958625hr.dts
index a71371b4065e..57974b8fab86 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958625hr.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958625hr.dts
@@ -89,8 +89,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958625k.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958625k.dts
index 7782b61c51a1..45a043ea77ce 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm958625k.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm958625k.dts
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm963138dvt.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm963138dvt.dts
index 5b177274f182..df5c8ab90627 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm963138dvt.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm963138dvt.dts
@@ -31,10 +31,10 @@
 	status = "okay";
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@0 {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-ecc-strength = <4>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm988312hr.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm988312hr.dts
index edd0f630e025..16b212cc8a2a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/bcm988312hr.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/bcm988312hr.dts
@@ -74,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dm816x.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dm816x.dtsi
index 3551a64963f8..1825d912b8ab 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dm816x.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dm816x.dtsi
@@ -351,7 +351,7 @@
 			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <12>;
-			mbox_dsp: mbox_dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <3 0 0>;
 				ti,mbox-rx = <0 0 0>;
 			};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
index a25749a1c365..a5bdc6431d8d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
@@ -5,17 +5,17 @@
 
 &mailbox5 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		status = "okay";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		status = "okay";
 	};
 };
 
 &mailbox6 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		status = "okay";
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra7-l4.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra7-l4.dtsi
index 3bf90d9e3335..30b72f431850 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra7-l4.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1168,7 +1168,7 @@
 			};
 		};
 
-		target-module@34000 {			/* 0x48034000, ap 7 46.0 */
+		timer3_target: target-module@34000 {	/* 0x48034000, ap 7 46.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x34000 0x4>,
 			      <0x34010 0x4>;
@@ -1195,7 +1195,7 @@
 			};
 		};
 
-		target-module@36000 {			/* 0x48036000, ap 9 4e.0 */
+		timer4_target: target-module@36000 {	/* 0x48036000, ap 9 4e.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x36000 0x4>,
 			      <0x36010 0x4>;
@@ -1315,7 +1315,7 @@
 			};
 		};
 
-		target-module@55000 {			/* 0x48055000, ap 13 0e.0 */
+		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x55000 0x4>,
 			      <0x55010 0x4>,
@@ -1348,7 +1348,7 @@
 			};
 		};
 
-		target-module@57000 {			/* 0x48057000, ap 15 06.0 */
+		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x57000 0x4>,
 			      <0x57010 0x4>,
@@ -4095,28 +4095,6 @@
 			};
 		};
 
-		usb4_tm: target-module@140000 {		/* 0x48940000, ap 75 3c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x140000 0x4>,
-			      <0x140010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x140000 0x20000>;
-		};
-
 		target-module@170000 {			/* 0x48970000, ap 21 0a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0x170010 0x4>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra7.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra7.dtsi
index 4e1bbc0198eb..7ecf8f86ac74 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra7.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra7.dtsi
@@ -46,6 +46,7 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
+		status = "disabled";	/* See ARM architected timer wrap erratum i940 */
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -1090,3 +1091,22 @@
 		assigned-clock-parents = <&sys_32k_ck>;
 	};
 };
+
+/* Local timers, see ARM architected timer wrap erratum i940 */
+&timer3_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
+
+&timer4_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra71x.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra71x.dtsi
index cad0e4a2bd8d..9c270d8f75d5 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra71x.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra71x.dtsi
@@ -11,7 +11,3 @@
 &rtctarget {
 	status = "disabled";
 };
-
-&usb4_tm {
-	status = "disabled";
-};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra72x.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra72x.dtsi
index d403acc754b6..90617261373c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra72x.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra72x.dtsi
@@ -77,12 +77,12 @@
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -90,7 +90,7 @@
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
@@ -108,7 +108,3 @@
 &pcie2_rc {
 	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
 };
-
-&usb4_tm {
-	status = "disabled";
-};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
index b1147a4b77f9..3256631510c5 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
@@ -6,7 +6,7 @@
 #include "dra7-ipu-dsp-common.dtsi"
 
 &mailbox6 {
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		status = "okay";
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/dra74x.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra74x.dtsi
index e1850d6c841a..cfb39dde4930 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/dra74x.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/dra74x.dtsi
@@ -49,49 +49,6 @@
 			reg = <0x41500000 0x100>;
 		};
 
-		target-module@48940000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x48940000 0x4>,
-			      <0x48940010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48940000 0x20000>;
-
-			omap_dwc3_4: omap_dwc3_4@0 {
-				compatible = "ti,dwc3";
-				reg = <0 0x10000>;
-				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				utmi-mode = <2>;
-				ranges;
-				status = "disabled";
-				usb4: usb@10000 {
-					compatible = "snps,dwc3";
-					reg = <0x10000 0x17000>;
-					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "peripheral",
-							  "host",
-							  "otg";
-					maximum-speed = "high-speed";
-					dr_mode = "otg";
-				};
-			};
-		};
 
 		target-module@41501000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
@@ -188,12 +145,12 @@
 };
 
 &mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -201,12 +158,12 @@
 };
 
 &mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
 		ti,mbox-tx = <6 2 2>;
 		ti,mbox-rx = <4 2 2>;
 		status = "disabled";
 	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
 		ti,mbox-tx = <5 2 2>;
 		ti,mbox-rx = <1 2 2>;
 		status = "disabled";
@@ -224,3 +181,52 @@
 &pcie2_rc {
 	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
 };
+
+&l4_per3 {
+	segment@0 {
+		usb4_tm: target-module@140000 {         /* 0x48940000, ap 75 3c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x140000 0x4>,
+			      <0x140010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x140000 0x20000>;
+
+			omap_dwc3_4: omap_dwc3_4@0 {
+				compatible = "ti,dwc3";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges;
+				status = "disabled";
+				usb4: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+				};
+			};
+		};
+	};
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos3250-artik5.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 12887b3924af..ad525f2accbb 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -79,7 +79,7 @@
 	s2mps14_pmic@66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx3>;
-		interrupts = <5 IRQ_TYPE_NONE>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s2mps14_irq>;
 		reg = <0x66>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos3250-monk.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos3250-monk.dts
index c1a68e612037..7e99e5812a4d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos3250-monk.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos3250-monk.dts
@@ -200,7 +200,7 @@
 	s2mps14_pmic@66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x66>;
 		wakeup-source;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos3250-rinato.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos3250-rinato.dts
index b55afaaa691e..f9e3b13d3aac 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos3250-rinato.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -270,7 +270,7 @@
 	s2mps14_pmic@66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x66>;
 		wakeup-source;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4210-i9100.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos4210-i9100.dts
index 5370ee477186..ecc9d4dc707e 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4210-i9100.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -136,7 +136,7 @@
 			compatible = "maxim,max17042";
 
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
 			pinctrl-0 = <&max17042_fuel_irq>;
 			pinctrl-names = "default";
@@ -765,7 +765,7 @@
 		compatible = "brcm,bcm4330-bt";
 
 		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>;
 		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4412-midas.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos4412-midas.dtsi
index 7e7c243ff196..06450066b178 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -174,7 +174,7 @@
 		max77693@66 {
 			compatible = "maxim,max77693";
 			interrupt-parent = <&gpx1>;
-			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77693_irq>;
 			reg = <0x66>;
@@ -223,7 +223,7 @@
 		max77693-fuel-gauge@36 {
 			compatible = "maxim,max17047";
 			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77693_fuel_irq>;
 			reg = <0x36>;
@@ -668,7 +668,7 @@
 	max77686: max77686_pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-0 = <&max77686_irq>;
 		pinctrl-names = "default";
 		reg = <0x09>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4412-odroid-common.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 2983e91bc7dd..869d80be1b36 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -279,7 +279,7 @@
 	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		reg = <0x09>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-smdk5250.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 186790f39e4d..d0e48c10aec2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -134,7 +134,7 @@
 		compatible = "maxim,max77686";
 		reg = <0x09>;
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		#clock-cells = <1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-snow-common.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index c952a615148e..737f0e20a452 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -292,7 +292,7 @@
 	max77686: max77686@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
 		wakeup-source;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-spring.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5250-spring.dts
index a92ade33779c..5a9c936407ea 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5250-spring.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5250-spring.dts
@@ -109,7 +109,7 @@
 		compatible = "samsung,s5m8767-pmic";
 		reg = <0x66>;
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
 		wakeup-source;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5410-odroidxu.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 75b4150c26d7..bd1d8499a108 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -327,6 +327,8 @@
 				regulator-name = "vddq_lcd";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				/* Supplies also GPK and GPJ */
+				regulator-always-on;
 			};
 
 			ldo8_reg: LDO8 {
@@ -637,11 +639,11 @@
 };
 
 &usbdrd_dwc3_0 {
-	dr_mode = "host";
+	dr_mode = "peripheral";
 };
 
 &usbdrd_dwc3_1 {
-	dr_mode = "peripheral";
+	dr_mode = "host";
 };
 
 &usbdrd3_0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5410-pinctrl.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index e5d0a2a4f648..d0aa18443a69 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -560,6 +560,34 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	usb3_1_oc: usb3-1-oc {
+		samsung,pins = "gpk2-4", "gpk2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_1_vbusctrl: usb3-1-vbusctrl {
+		samsung,pins = "gpk2-6", "gpk2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_0_oc: usb3-0-oc {
+		samsung,pins = "gpk3-0", "gpk3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_0_vbusctrl: usb3-0-vbusctrl {
+		samsung,pins = "gpk3-2", "gpk3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
 };
 
 &pinctrl_2 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5410.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5410.dtsi
index 60a87684b1af..584ce62361b1 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5410.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5410.dtsi
@@ -390,6 +390,8 @@
 &usbdrd3_0 {
 	clocks = <&clock CLK_USBD300>;
 	clock-names = "usbdrd30";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>;
 };
 
 &usbdrd_phy0 {
@@ -401,6 +403,8 @@
 &usbdrd3_1 {
 	clocks = <&clock CLK_USBD301>;
 	clock-names = "usbdrd30";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>;
 };
 
 &usbdrd_dwc3_1 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5420-arndale-octa.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index dd7f8385d81e..3d9b93d2b242 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -349,7 +349,7 @@
 		reg = <0x66>;
 
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s2mps11_irq>;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5422-odroid-core.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index b1cf9414ce17..d51c1d8620a0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -509,7 +509,7 @@
 		samsung,s2mps11-acokb-ground;
 
 		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s2mps11_irq>;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5422-odroidhc1.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5422-odroidhc1.dts
index 812659260278..88f5c150a30a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -22,7 +22,7 @@
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5422-odroidxu4.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5422-odroidxu4.dts
index ddd55d3bcadd..4ef0dbc84b0c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -24,7 +24,7 @@
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
index 56acd832f0b3..16e1087ec717 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -22,7 +22,7 @@
 			 * Green LED is much brighter than the others
 			 * so limit its max brightness
 			 */
-			max_brightness = <127>;
+			max-brightness = <127>;
 			linux,default-trigger = "mmc0";
 		};
 
@@ -30,7 +30,7 @@
 			label = "blue:heartbeat";
 			pwms = <&pwm 2 2000000 0>;
 			pwm-names = "pwm2";
-			max_brightness = <255>;
+			max-brightness = <255>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-dlink-dns-313.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/gemini-dlink-dns-313.dts
index c6f3d90e3e90..b8acc6eaaa6d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -140,7 +140,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		/* Uses MDC and MDIO */
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-nas4220b.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/gemini-nas4220b.dts
index 43c45f7e1e0a..6544c730340f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-nas4220b.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -62,7 +62,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -84,7 +84,7 @@
 			partitions {
 				compatible = "redboot-fis";
 				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x1fc>;
+				fis-index-block = <0x7f>;
 			};
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-rut1xx.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/gemini-rut1xx.dts
index 9611ddf06792..0ebda4efd9d0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-rut1xx.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -56,7 +56,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -125,18 +125,6 @@
 			};
 		};
 
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
 		usb@68000000 {
 			status = "okay";
 		};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-wbd111.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/gemini-wbd111.dts
index 3a2761dd460f..5602ba8f30f2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-wbd111.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/gemini-wbd111.dts
@@ -68,7 +68,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-wbd222.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/gemini-wbd222.dts
index 52b4dbc0c072..a4a260c36d75 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini-wbd222.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/gemini-wbd222.dts
@@ -67,7 +67,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/gemini.dtsi
index 065ed10a79fa..07448c03dac9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/gemini.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/gemini.dtsi
@@ -286,6 +286,7 @@
 			clock-names = "PCLK", "PCICLK";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx23-evk.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx23-evk.dts
index 8cbaf1c81174..3b609d987d88 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx23-evk.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx53-m53menlo.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx53-m53menlo.dts
index f98691ae4415..4f88e96d81dd 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx53-m53menlo.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -56,6 +56,7 @@
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		pinctrl-0 = <&pinctrl_display_gpio>;
+		pinctrl-names = "default";
 		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 
 		port {
@@ -76,8 +77,7 @@
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		gpio = <&gpio1 2 0>;
 	};
 };
 
@@ -388,13 +388,13 @@
 
 		pinctrl_power_button: powerbutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
+				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
 			>;
 		};
 
 		pinctrl_power_out: poweroutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
+				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
 			>;
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx53-ppd.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx53-ppd.dts
index f7dcdf96e5c0..6d9a5ede94aa 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx53-ppd.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx53-ppd.dts
@@ -70,6 +70,12 @@
 		clock-frequency = <11289600>;
 	};
 
+	achc_24M: achc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
 	sgtlsound: sound {
 		compatible = "fsl,imx53-cpuvo-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
@@ -313,16 +319,13 @@
 		    &gpio4 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	spidev0: spi@0 {
-		compatible = "ge,achc";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "ge,achc";
-		reg = <1>;
-		spi-max-frequency = <1000000>;
+	spidev0: spi@1 {
+		compatible = "ge,achc", "nxp,kinetis-k20";
+		reg = <1>, <0>;
+		vdd-supply = <&reg_3v3>;
+		vdda-supply = <&reg_3v3>;
+		clocks = <&achc_24M>;
+		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 	};
 
 	gpioxra0: gpio@2 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-riotboard.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6dl-riotboard.dts
index 065d3ab0f50a..e7d9bfbfd0e4 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -106,6 +106,8 @@
 			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <1000>;
+			qca,smarteee-tw-us-1g = <24>;
+			qca,clk-out-frequency = <125000000>;
 		};
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 7d2c72562c73..ebc0892e37c7 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -105,9 +106,13 @@
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
-	phy-handle = <&ethphy0>;
 	status = "okay";
 
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -271,6 +276,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
 		};
 
 		chan@1 {
@@ -278,6 +284,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		chan@2 {
@@ -285,6 +292,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
 		};
 
 		chan@3 {
@@ -292,6 +300,7 @@
 			led-cur = /bits/ 8 <0x0>;
 			max-cur = /bits/ 8 <0x0>;
 			reg = <3>;
+			color = <LED_COLOR_ID_WHITE>;
 		};
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-dhcom-som.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 236fc205c389..e3de2b487cf4 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -96,30 +96,40 @@
 			reg = <0>;
 			max-speed = <100>;
 			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <1000>;
-			reset-post-delay-us = <1000>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
 		};
 	};
 };
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 &i2c2 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
 &i2c3 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
 	ltc3676: pmic@3c {
@@ -285,6 +295,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
 	pinctrl_i2c2: i2c2-grp {
 		fsl,pins = <
 			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
@@ -292,6 +309,13 @@
 		>;
 	};
 
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
 	pinctrl_i2c3: i2c3-grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
@@ -299,6 +323,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x4001b8b1
+		>;
+	};
+
 	pinctrl_pmic_hw300: pmic-hw300-grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1B0B0
@@ -406,6 +437,18 @@
 	vin-supply = <&sw1_reg>;
 };
 
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-tbs2910.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6q-tbs2910.dts
index 861e05d53157..343364d3e4f7 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -16,6 +16,13 @@
 		stdout-path = &uart1;
 	};
 
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc4;
+		/delete-property/ mmc3;
+	};
+
 	memory@10000000 {
 		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
index 828cf3e39784..c4e146f3341b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
@@ -126,7 +126,7 @@
 		compatible = "nxp,pca8574";
 		reg = <0x3a>;
 		gpio-controller;
-		#gpio-cells = <1>;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 736074f1c3ef..959d8ac2e393 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -418,7 +418,7 @@
 
 			/* VDD_AUD_1P8: Audio codec */
 			reg_aud_1p8v: ldo3 {
-				regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8a";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index 24f793ca2886..92f9977d1482 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -137,7 +137,7 @@
 
 	lcd_backlight: lcd-backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
+		pwms = <&pwm4 0 5000000 0>;
 		pwm-names = "LCD_BKLT_PWM";
 
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
@@ -167,7 +167,7 @@
 		i2c-gpio,delay-us = <2>; /* ~100 kHz */
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabld";
+		status = "disabled";
 	};
 
 	i2c_cam: i2c-gpio-cam {
@@ -179,7 +179,7 @@
 		i2c-gpio,delay-us = <2>; /* ~100 kHz */
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabld";
+		status = "disabled";
 	};
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index e361df26a168..33a70f436aa3 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -315,8 +315,8 @@
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
 			>;
 		};
 
@@ -403,6 +403,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
@@ -432,6 +433,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd1_reg>;
 	status = "disabled";
 };
 
@@ -441,5 +443,6 @@
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd0_reg>;
 	status = "disabled";
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-pico.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-pico.dtsi
index 5de4ccb97916..f7a56d6b160c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-pico.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-pico.dtsi
@@ -176,7 +176,18 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-sr-som.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index b06577808ff4..c56337b63c3b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -53,9 +53,14 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
-	phy-handle = <&phy>;
 	phy-mode = "rgmii-id";
-	phy-reset-duration = <2>;
+
+	/*
+	 * The PHY seems to require a long-enough reset duration to avoid
+	 * some rare issues where the PHY gets stuck in an inconsistent and
+	 * non-functional state at boot-up. 10ms proved to be fine .
+	 */
+	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
@@ -63,10 +68,19 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		phy: ethernet-phy@0 {
+		/*
+		 * The PHY can appear at either address 0 or 4 due to the
+		 * configuration (LED) pin not being pulled sufficiently.
+		 */
+		ethernet-phy@0 {
 			reg = <0>;
 			qca,clk-out-frequency = <125000000>;
 		};
+
+		ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
 	};
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-udoo.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index d07d8f83456d..ccfa8e320be6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -226,6 +228,7 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -304,7 +307,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-wandboard.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index c070893c509e..5bad982bc5a0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -289,6 +289,7 @@
 
 		ethphy: ethernet-phy@1 {
 			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
 		};
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index a0545431b3dc..9f1e38282bee 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -43,6 +43,7 @@
 	assigned-clock-rates = <0>, <198000000>;
 	cap-power-off-card;
 	keep-power-in-suspend;
+	max-frequency = <25000000>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	no-1-8-v;
 	non-removable;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
index ecbb2cc5b9ab..79cc45728cd2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
@@ -14,5 +14,6 @@
 };
 
 &gpmi {
+	fsl,use-minimum-ecc;
 	status = "okay";
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-pinfunc.h linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6ull-pinfunc.h
index eb025a9d4759..7328d4ef8559 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx6ull-pinfunc.h
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx6ull-pinfunc.h
@@ -82,6 +82,6 @@
 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS                         0x01F4 0x0480 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK                        0x01F8 0x0484 0x0000 0x9 0x0
 #define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0                       0x01FC 0x0488 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA07__ESAI_T0                            0x0200 0x048C 0x0000 0x9 0x0
+#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0                           0x0200 0x048C 0x0000 0x9 0x0
 
 #endif /* __DTS_IMX6ULL_PINFUNC_H */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-meerkat96.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx7d-meerkat96.dts
index 5339210b63d0..dd8003bd1fc0 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-meerkat96.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx7d-meerkat96.dts
@@ -193,7 +193,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	keep-power-in-suspend;
-	tuning-step = <2>;
+	fsl,tuning-step = <2>;
 	vmmc-supply = <&reg_3p3v>;
 	no-1-8-v;
 	broken-cd;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-pico.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx7d-pico.dtsi
index e57da0d32b98..e519897fae08 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7d-pico.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx7d-pico.dtsi
@@ -351,7 +351,7 @@
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
-	tuning-step = <2>;
+	fsl,tuning-step = <2>;
 	vmmc-supply = <&reg_3p3v>;
 	wakeup-source;
 	no-1-8-v;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7ulp.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx7ulp.dtsi
index b7ea37ad4e55..bcec98b96411 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/imx7ulp.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/imx7ulp.dtsi
@@ -259,7 +259,7 @@
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/lpc32xx.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/lpc32xx.dtsi
index 7b7ec7b1217b..824393e1bcfb 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/lpc32xx.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/lpc32xx.dtsi
@@ -329,9 +329,6 @@
 
 					clocks = <&xtal_32k>, <&xtal>;
 					clock-names = "xtal_32k", "xtal";
-
-					assigned-clocks = <&clk LPC32XX_CLK_HCLK_PLL>;
-					assigned-clock-rates = <208000000>;
 				};
 			};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ls1021a-tsn.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ls1021a-tsn.dts
index 9d8f0c2a8aba..aca78b5eddf2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ls1021a-tsn.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -251,7 +251,7 @@
 
 	flash@0 {
 		/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
-		compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+		compatible = "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ls1021a.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ls1021a.dtsi
index 827373ef1a54..37026b2fa649 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ls1021a.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ls1021a.dtsi
@@ -331,39 +331,6 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			cpu_thermal: cpu-thermal {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					cpu_alert: cpu-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-					cpu_crit: cpu-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&cpu_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT
-							THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		dspi0: spi@2100000 {
 			compatible = "fsl,ls1021a-v1.0-dspi";
 			#address-cells = <1>;
@@ -1018,4 +985,37 @@
 			big-endian;
 		};
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT
+						THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson.dtsi
index 7649dd1e0b9e..c928ae312e19 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson.dtsi
@@ -42,14 +42,14 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -87,7 +87,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -203,7 +203,7 @@
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson8.dtsi
index 04688e8abce2..08533116a39c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson8.dtsi
@@ -251,8 +251,13 @@
 					  "pp2", "ppmmu2", "pp4", "ppmmu4",
 					  "pp5", "ppmmu5", "pp6", "ppmmu6";
 			resets = <&reset RESET_MALI>;
+
 			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
 			clock-names = "bus", "core";
+
+			assigned-clocks = <&clkc CLKID_MALI>;
+			assigned-clock-rates = <318750000>;
+
 			operating-points-v2 = <&gpu_opp_table>;
 		};
 	};
@@ -593,27 +598,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b-ec100.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson8b-ec100.dts
index ed06102a4014..c6824d26dbbf 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b-ec100.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson8b-ec100.dts
@@ -153,7 +153,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -237,7 +237,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b-mxq.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson8b-mxq.dts
index 33037ef62d0a..b2edac1fce6d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b-mxq.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson8b-mxq.dts
@@ -39,6 +39,8 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
+		pwm-supply = <&vcc_5v>;
+
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
 
@@ -84,7 +86,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b-odroidc1.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson8b-odroidc1.dts
index 0c26467de4d0..73ce1c13da24 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -136,7 +136,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 0 12218 0>;
 		pwm-dutycycle-range = <91 0>;
@@ -168,7 +168,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 1 12218 0>;
 		pwm-dutycycle-range = <91 0>;
@@ -224,7 +224,7 @@
 			reg = <0>;
 
 			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
+			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
 
 			interrupt-parent = <&gpio_intc>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson8b.dtsi
index 2401cdf5f751..f6eb7c803174 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8b.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson8b.dtsi
@@ -586,27 +586,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8m2-mxiii-plus.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index cc498191ddd1..8f4eb1ed4581 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -81,7 +81,7 @@
 			reg = <0>;
 
 			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
+			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
index 7f6aefd13451..e7534fe9c53c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -29,7 +29,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-beagle-ab4.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-beagle-ab4.dts
new file mode 100644
index 000000000000..990ff2d84686
--- /dev/null
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+	model = "TI OMAP3 BeagleBoard A to B4";
+	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-beagle.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-beagle.dts
index f9f34b8458e9..0548b391334f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-beagle.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-beagle.dts
@@ -304,39 +304,6 @@
 	phys = <0 &hsusb2_phy>;
 };
 
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
-
 &twl_gpio {
 	ti,use-leds;
 	/* pullups: BIT(1) */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-devkit8000-common.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 2c19d6e255bd..6883ccb45600 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -158,6 +158,24 @@
 	status = "disabled";
 };
 
+/* Unusable as clockevent because if unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
 &twl_gpio {
 	ti,use-leds;
 	/*
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-devkit8000.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-devkit8000.dts
index c2995a280729..162d0726b008 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-devkit8000.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -14,36 +14,3 @@
 		display2 = &tv0;
 	};
 };
-
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-gta04.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-gta04.dtsi
index c8745bc800f7..80c9e5e34136 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-gta04.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -114,7 +114,7 @@
 		gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 		gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
 		/* lcd panel */
@@ -124,7 +124,6 @@
 			spi-max-frequency = <100000>;
 			spi-cpol;
 			spi-cpha;
-			spi-cs-high;
 
 			backlight= <&backlight>;
 			label = "lcd";
@@ -516,7 +515,7 @@
 		compatible = "bosch,bma180";
 		reg = <0x41>;
 		pinctrl-names = "default";
-		pintcrl-0 = <&bma180_pins>;
+		pinctrl-0 = <&bma180_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-n900.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-n900.dts
index 32335d4ce478..d40c3d2c4914 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-n900.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-n900.dts
@@ -8,6 +8,7 @@
 
 #include "omap34xx.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 /*
  * Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
@@ -630,63 +631,92 @@
 	};
 
 	lp5523: lp5523@32 {
+		#address-cells = <1>;
+		#size-cells = <0>;
 		compatible = "national,lp5523";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+		enable-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
 
-		chan0 {
+		led@0 {
+			reg = <0>;
 			chan-name = "lp5523:kb1";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan1 {
+		led@1 {
+			reg = <1>;
 			chan-name = "lp5523:kb2";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan2 {
+		led@2 {
+			reg = <2>;
 			chan-name = "lp5523:kb3";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan3 {
+		led@3 {
+			reg = <3>;
 			chan-name = "lp5523:kb4";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan4 {
+		led@4 {
+			reg = <4>;
 			chan-name = "lp5523:b";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan5 {
+		led@5 {
+			reg = <5>;
 			chan-name = "lp5523:g";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan6 {
+		led@6 {
+			reg = <6>;
 			chan-name = "lp5523:r";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
 		};
 
-		chan7 {
+		led@7 {
+			reg = <7>;
 			chan-name = "lp5523:kb5";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 
-		chan8 {
+		led@8 {
+			reg = <8>;
 			chan-name = "lp5523:kb6";
 			led-cur = /bits/ 8 <50>;
 			max-cur = /bits/ 8 <100>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_KBD_BACKLIGHT;
 		};
 	};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-n950-n9.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 11d41e86f814..7dde9fbb06d3 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -494,3 +494,11 @@
 		clock-names = "sysclk";
 	};
 };
+
+&aes1_target {
+	status = "disabled";
+};
+
+&aes2_target {
+	status = "disabled";
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
index e5da3bc6f105..218a10c0d815 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -22,7 +22,7 @@
 		compatible = "smsc,lan9221","smsc,lan9115";
 		bank-width = <2>;
 
-		gpmc,mux-add-data;
+		gpmc,mux-add-data = <0>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <42>;
 		gpmc,cs-wr-off-ns = <36>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3.dtsi
index 9dcae1f2bc99..c5b9da0d7e6c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3.dtsi
@@ -24,6 +24,9 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3430-sdp.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3430-sdp.dts
index c5b903718414..7d530ae3483b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap3430-sdp.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap3430-sdp.dts
@@ -101,7 +101,7 @@
 
 	nand@1,0 {
 		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap4-l4.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap4-l4.dtsi
index de742bf84efb..5015df4d876c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap4-l4.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap4-l4.dtsi
@@ -597,11 +597,11 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap4-panda-es.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap4-panda-es.dts
index cfa85aa3da08..6afa8fd7c412 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap4-panda-es.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap4-panda-es.dts
@@ -46,7 +46,7 @@
 
 	button_pins: pinmux_button_pins {
 		pinctrl-single,pins = <
-			OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
+			OMAP4_IOPAD(0x0fc, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
 		>;
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap4.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap4.dtsi
index d6475cc6a91a..049174086756 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap4.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap4.dtsi
@@ -22,6 +22,11 @@
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap443x.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap443x.dtsi
index cb309743de5d..dd8ef58cbaed 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap443x.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap443x.dtsi
@@ -33,10 +33,12 @@
 	};
 
 	ocp {
+		/* 4430 has only gpio_86 tshut and no talert interrupt */
 		bandgap: bandgap@4a002260 {
 			reg = <0x4a002260 0x4
 			       0x4a00232C 0x4>;
 			compatible = "ti,omap4430-bandgap";
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
 			#thermal-sensor-cells = <0>;
 		};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap44xx-clocks.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap44xx-clocks.dtsi
index 532868591107..1f1c04d8f472 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -770,14 +770,6 @@
 		ti,max-div = <2>;
 	};
 
-	sha2md5_fck: sha2md5_fck@15c8 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15c8>;
-	};
-
 	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap5-board-common.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap5-board-common.dtsi
index d8f13626cfd1..3a8f10231475 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap5-board-common.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -30,14 +30,6 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	vdds_1v8_main: fixedregulator-vdds_1v8_main {
-		compatible = "regulator-fixed";
-		regulator-name = "vdds_1v8_main";
-		vin-supply = <&smps7_reg>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
 	vmmcsd_fixed: fixedregulator-mmcsd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -487,6 +479,7 @@
 					regulator-boot-on;
 				};
 
+				vdds_1v8_main:
 				smps7_reg: smps7 {
 					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 					regulator-name = "smps7";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap5-l4.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap5-l4.dtsi
index f3d3a16b7c64..c67c8698cc30 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap5-l4.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap5-l4.dtsi
@@ -613,11 +613,11 @@
 				#mbox-cells = <1>;
 				ti,mbox-num-users = <3>;
 				ti,mbox-num-fifos = <8>;
-				mbox_ipu: mbox_ipu {
+				mbox_ipu: mbox-ipu {
 					ti,mbox-tx = <0 0 0>;
 					ti,mbox-rx = <1 0 0>;
 				};
-				mbox_dsp: mbox_dsp {
+				mbox_dsp: mbox-dsp {
 					ti,mbox-tx = <3 0 0>;
 					ti,mbox-rx = <2 0 0>;
 				};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/omap5.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap5.dtsi
index 2bf2e5839a7f..530210db2719 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/omap5.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/omap5.dtsi
@@ -25,6 +25,11 @@
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
 		i2c4 = &i2c5;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/picoxcell-pc3x2.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
index c4c6c7e9e37b..5898879a3038 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/picoxcell-pc3x2.dtsi
@@ -45,18 +45,21 @@
 		emac: gem@30000 {
 			compatible = "cadence,gem";
 			reg = <0x30000 0x10000>;
+			interrupt-parent = <&vic0>;
 			interrupts = <31>;
 		};
 
 		dmac1: dmac@40000 {
 			compatible = "snps,dw-dmac";
 			reg = <0x40000 0x10000>;
+			interrupt-parent = <&vic0>;
 			interrupts = <25>;
 		};
 
 		dmac2: dmac@50000 {
 			compatible = "snps,dw-dmac";
 			reg = <0x50000 0x10000>;
+			interrupt-parent = <&vic0>;
 			interrupts = <26>;
 		};
 
@@ -233,6 +236,7 @@
 		axi2pico@c0000000 {
 			compatible = "picochip,axi2pico-pc3x2";
 			reg = <0xc0000000 0x10000>;
+			interrupt-parent = <&vic0>;
 			interrupts = <13 14 15 16 17 18 19 20 21>;
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-apq8064.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/qcom-apq8064.dtsi
index 2687c4e890ba..72c4a9fc41a2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -198,7 +198,7 @@
 			clock-frequency = <19200000>;
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <27000000>;
@@ -1148,7 +1148,7 @@
 		};
 
 		gpu: adreno-3xx@4300000 {
-			compatible = "qcom,adreno-3xx";
+			compatible = "qcom,adreno-320.2", "qcom,adreno";
 			reg = <0x04300000 0x20000>;
 			reg-names = "kgsl_3d0_reg_memory";
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
@@ -1163,7 +1163,6 @@
 			    <&mmcc GFX3D_AHB_CLK>,
 			    <&mmcc GFX3D_AXI_CLK>,
 			    <&mmcc MMSS_IMEM_AHB_CLK>;
-			qcom,chipid = <0x03020002>;
 
 			iommus = <&gfx3d 0
 				  &gfx3d 1
@@ -1262,9 +1261,9 @@
 				<&mmcc DSI1_BYTE_CLK>,
 				<&mmcc DSI_PIXEL_CLK>,
 				<&mmcc DSI1_ESC_CLK>;
-			clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
-					"src_clk", "byte_clk", "pixel_clk",
-					"core_clk";
+			clock-names = "iface", "bus", "core_mmss",
+					"src", "byte", "pixel",
+					"core";
 
 			assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
 					<&mmcc DSI1_ESC_SRC>,
@@ -1306,7 +1305,7 @@
 			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
 			clock-names = "iface_clk", "ref";
 			clocks = <&mmcc DSI_M_AHB_CLK>,
-				 <&cxo_board>;
+				 <&pxo_board>;
 		};
 
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 282b89ce3d45..33545cf40f3a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -19,12 +19,12 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@0 {
+	memory@42000000 {
 		reg = <0x42000000 0x3e000000>;
 		device_type = "memory";
 	};
 
-	mdio0: mdio@0 {
+	mdio0: mdio-0 {
 		status = "okay";
 		compatible = "virtual,mdio-gpio";
 		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
@@ -91,7 +91,7 @@
 		};
 	};
 
-	mdio1: mdio@1 {
+	mdio1: mdio-1 {
 		status = "okay";
 		compatible = "virtual,mdio-gpio";
 		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-msm8974.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/qcom-msm8974.dtsi
index 51f5f904f9eb..5f7426fb4e41 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1528,8 +1528,8 @@
 				#phy-cells = <0>;
 				qcom,dsi-phy-index = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>;
-				clock-names = "iface";
+				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clock-names = "iface", "ref";
 			};
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7779-marzen.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7779-marzen.dts
index d2240b89ee52..465845323495 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7779-marzen.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -145,7 +145,7 @@
 	status = "okay";
 
 	clocks = <&mstp1_clks R8A7779_CLK_DU>, <&x3_clk>;
-	clock-names = "du", "dclkin.0";
+	clock-names = "du.0", "dclkin.0";
 
 	ports {
 		port@0 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7779.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7779.dtsi
index 74d7e9084eab..3c5fcdfe16b8 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7779.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7779.dtsi
@@ -463,6 +463,7 @@
 		reg = <0xfff80000 0x40000>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_DU>;
+		clock-names = "du.0";
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
 		status = "disabled";
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7790-lager.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7790-lager.dts
index 09a152b91557..1d6f0c5d02e9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7790-lager.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7790-lager.dts
@@ -53,6 +53,9 @@
 		i2c11 = &i2cexio1;
 		i2c12 = &i2chdmi;
 		i2c13 = &i2cpwr;
+		mmc0 = &mmcif1;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7791-koelsch.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7791-koelsch.dts
index f603cba5441f..6af1727b8269 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -53,6 +53,9 @@
 		i2c12 = &i2cexio1;
 		i2c13 = &i2chdmi;
 		i2c14 = &i2cexio4;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7791-porter.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7791-porter.dts
index c6d563fb7ec7..bf51e29c793a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7791-porter.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7791-porter.dts
@@ -28,6 +28,8 @@
 		serial0 = &scif0;
 		i2c9 = &gpioi2c2;
 		i2c10 = &i2chdmi;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7793-gose.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7793-gose.dts
index abf487e8fe0f..2b59a0491350 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7793-gose.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7793-gose.dts
@@ -49,6 +49,9 @@
 		i2c10 = &gpioi2c4;
 		i2c11 = &i2chdmi;
 		i2c12 = &i2cexio4;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		mmc2 = &sdhi2;
 	};
 
 	chosen {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7794-alt.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7794-alt.dts
index 3f1cc5bbf329..32025986b3b9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7794-alt.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7794-alt.dts
@@ -19,6 +19,9 @@
 		i2c10 = &gpioi2c4;
 		i2c11 = &i2chdmi;
 		i2c12 = &i2cexio4;
+		mmc0 = &mmcif0;
+		mmc1 = &sdhi0;
+		mmc2 = &sdhi1;
 	};
 
 	chosen {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7794-silk.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7794-silk.dts
index 677596f6c9c9..af066ee5e275 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/r8a7794-silk.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/r8a7794-silk.dts
@@ -31,6 +31,8 @@
 		serial0 = &scif2;
 		i2c9 = &gpioi2c1;
 		i2c10 = &i2chdmi;
+		mmc0 = &mmcif0;
+		mmc1 = &sdhi1;
 	};
 
 	chosen {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/rk3036-kylin.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk3036-kylin.dts
index 7154b827ea2f..e817eba8c622 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/rk3036-kylin.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk3036-kylin.dts
@@ -390,7 +390,7 @@
 		};
 	};
 
-	sleep {
+	suspend {
 		global_pwroff: global-pwroff {
 			rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>;
 		};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/rk3066a.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk3066a.dtsi
index 252750c97f97..bbc3bff50856 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/rk3066a.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk3066a.dtsi
@@ -755,7 +755,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3066_PD_VIO {
+		power-domain@RK3066_PD_VIO {
 			reg = <RK3066_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -782,7 +782,7 @@
 				 <&qos_rga>;
 		};
 
-		pd_video@RK3066_PD_VIDEO {
+		power-domain@RK3066_PD_VIDEO {
 			reg = <RK3066_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
@@ -791,7 +791,7 @@
 			pm_qos = <&qos_vpu>;
 		};
 
-		pd_gpu@RK3066_PD_GPU {
+		power-domain@RK3066_PD_GPU {
 			reg = <RK3066_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/rk3188.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk3188.dtsi
index 2298a8d840ba..b6bde9d12c2b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/rk3188.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk3188.dtsi
@@ -150,16 +150,16 @@
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x2000e000 0x20>;
 		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER3>, <&cru PCLK_TIMER3>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER3>, <&cru SCLK_TIMER3>;
+		clock-names = "pclk", "timer";
 	};
 
 	timer6: timer@200380a0 {
 		compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
 		reg = <0x200380a0 0x20>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_TIMER6>, <&cru PCLK_TIMER0>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER6>;
+		clock-names = "pclk", "timer";
 	};
 
 	i2s0: i2s@1011a000 {
@@ -699,7 +699,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		pd_vio@RK3188_PD_VIO {
+		power-domain@RK3188_PD_VIO {
 			reg = <RK3188_PD_VIO>;
 			clocks = <&cru ACLK_LCDC0>,
 				 <&cru ACLK_LCDC1>,
@@ -721,7 +721,7 @@
 				 <&qos_rga>;
 		};
 
-		pd_video@RK3188_PD_VIDEO {
+		power-domain@RK3188_PD_VIDEO {
 			reg = <RK3188_PD_VIDEO>;
 			clocks = <&cru ACLK_VDPU>,
 				 <&cru ACLK_VEPU>,
@@ -730,7 +730,7 @@
 			pm_qos = <&qos_vpu>;
 		};
 
-		pd_gpu@RK3188_PD_GPU {
+		power-domain@RK3188_PD_GPU {
 			reg = <RK3188_PD_GPU>;
 			clocks = <&cru ACLK_GPU>;
 			pm_qos = <&qos_gpu>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/rk322x.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk322x.dtsi
index 48e6e8d44a1a..2f17bf35d7a6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/rk322x.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk322x.dtsi
@@ -524,7 +524,7 @@
 		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
 		pinctrl-2 = <&otp_pin>;
-		#thermal-sensor-cells = <0>;
+		#thermal-sensor-cells = <1>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
 	};
@@ -565,10 +565,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20020800 0x100>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vpu_mmu";
 		clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -576,10 +575,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20030480 0x40>, <0x200304c0 0x40>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vdec_mmu";
 		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -609,7 +607,6 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20053f00 0x100>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vop_mmu";
 		clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
 		clock-names = "aclk", "iface";
 		#iommu-cells = <0>;
@@ -630,10 +627,9 @@
 		compatible = "rockchip,iommu";
 		reg = <0x20070800 0x100>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "iep_mmu";
 		clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
 		clock-names = "aclk", "iface";
-		iommu-cells = <0>;
+		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
@@ -644,8 +640,8 @@
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		assigned-clocks = <&cru SCLK_HDMI_PHY>;
 		assigned-clock-parents = <&hdmi_phy>;
-		clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
-		clock-names = "isfr", "iahb", "cec";
+		clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "cec";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
 		resets = <&cru SRST_HDMI_P>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/rk3288-rock2-som.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 44bb5e6f83b1..76363b8afcb9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -218,7 +218,7 @@
 	flash0-supply = <&vcc_flash>;
 	flash1-supply = <&vccio_pmu>;
 	gpio30-supply = <&vccio_pmu>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/rk3288-vyasa.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk3288-vyasa.dts
index aa50f8ed4ca0..b156a83eb7d7 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/rk3288-vyasa.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -379,10 +379,10 @@
 	audio-supply = <&vcc_18>;
 	bb-supply = <&vcc_io>;
 	dvp-supply = <&vcc_io>;
-	flash0-suuply = <&vcc_18>;
+	flash0-supply = <&vcc_18>;
 	flash1-supply = <&vcc_lan>;
 	gpio30-supply = <&vcc_io>;
-	gpio1830 = <&vcc_io>;
+	gpio1830-supply = <&vcc_io>;
 	lcdc-supply = <&vcc_io>;
 	sdcard-supply = <&vccio_sd>;
 	wifi-supply = <&vcc_18>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/rk3288.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk3288.dtsi
index 68d5a58cfe88..9051fb4a267d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/rk3288.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/rk3288.dtsi
@@ -240,8 +240,8 @@
 		compatible = "rockchip,rk3288-timer";
 		reg = <0x0 0xff810000 0x0 0x20>;
 		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&xin24m>, <&cru PCLK_TIMER>;
-		clock-names = "timer", "pclk";
+		clocks = <&cru PCLK_TIMER>, <&xin24m>;
+		clock-names = "pclk", "timer";
 	};
 
 	display-subsystem {
@@ -788,7 +788,7 @@
 			 *	*_HDMI		HDMI
 			 *	*_MIPI_*	MIPI
 			 */
-			pd_vio@RK3288_PD_VIO {
+			power-domain@RK3288_PD_VIO {
 				reg = <RK3288_PD_VIO>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru ACLK_ISP>,
@@ -830,7 +830,7 @@
 			 * Note: The following 3 are HEVC(H.265) clocks,
 			 * and on the ACLK_HEVC_NIU (NOC).
 			 */
-			pd_hevc@RK3288_PD_HEVC {
+			power-domain@RK3288_PD_HEVC {
 				reg = <RK3288_PD_HEVC>;
 				clocks = <&cru ACLK_HEVC>,
 					 <&cru SCLK_HEVC_CABAC>,
@@ -844,7 +844,7 @@
 			 * (video endecoder & decoder) clocks that on the
 			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
 			 */
-			pd_video@RK3288_PD_VIDEO {
+			power-domain@RK3288_PD_VIDEO {
 				reg = <RK3288_PD_VIDEO>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
@@ -855,7 +855,7 @@
 			 * Note: ACLK_GPU is the GPU clock,
 			 * and on the ACLK_GPU_NIU (NOC).
 			 */
-			pd_gpu@RK3288_PD_GPU {
+			power-domain@RK3288_PD_GPU {
 				reg = <RK3288_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 				pm_qos = <&qos_gpu_r>,
@@ -990,7 +990,7 @@
 		status = "disabled";
 	};
 
-	crypto: cypto-controller@ff8a0000 {
+	crypto: crypto@ff8a0000 {
 		compatible = "rockchip,rk3288-crypto";
 		reg = <0x0 0xff8a0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -1593,7 +1593,7 @@
 			drive-strength = <12>;
 		};
 
-		sleep {
+		suspend {
 			global_pwroff: global-pwroff {
 				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>;
 			};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/s5pv210-fascinate4g.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index ca064359dd30..b47d8300e536 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -115,7 +115,7 @@
 	compatible = "maxim,max77836-battery";
 
 	interrupt-parent = <&gph3>;
-	interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&fg_irq>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/sam9x60.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sam9x60.dtsi
index 84066c1298df..ec45ced3cde6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/sam9x60.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sam9x60.dtsi
@@ -606,6 +606,15 @@
 				compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
+				/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
+				atmel,mux-mask = <
+						 /*	A	B	C	*/
+						 0xffffffff 0xffe03fff 0xef00019d	/* pioA */
+						 0x03ffffff 0x02fc7e7f 0x00780000	/* pioB */
+						 0xffffffff 0xffffffff 0xf83fffff	/* pioC */
+						 0x003fffff 0x003f8000 0x00000000	/* pioD */
+						 >;
+
 				pioA: gpio@fffff400 {
 					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/sama5d2.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sama5d2.dtsi
index 2ddc85dff8ce..2c4952427296 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/sama5d2.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sama5d2.dtsi
@@ -656,6 +656,7 @@
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
 				#address-cells = <1>;
 				#size-cells = <1>;
+				no-memory-wc;
 				ranges = <0 0xf8044000 0x1420>;
 			};
 
@@ -724,7 +725,7 @@
 
 			can0: can@f8054000 {
 				compatible = "bosch,m_can";
-				reg = <0xf8054000 0x4000>, <0x210000 0x4000>;
+				reg = <0xf8054000 0x4000>, <0x210000 0x1c00>;
 				reg-names = "m_can", "message_ram";
 				interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
 					     <64 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -1130,7 +1131,7 @@
 
 			can1: can@fc050000 {
 				compatible = "bosch,m_can";
-				reg = <0xfc050000 0x4000>, <0x210000 0x4000>;
+				reg = <0xfc050000 0x4000>, <0x210000 0x3800>;
 				reg-names = "m_can", "message_ram";
 				interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
 					     <65 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -1140,7 +1141,7 @@
 				assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
 				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
 				assigned-clock-rates = <40000000>;
-				bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>;
+				bosch,mram-cfg = <0x1c00 0 0 64 0 0 32 32>;
 				status = "disabled";
 			};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/sama5d4.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sama5d4.dtsi
index 04f24cf752d3..e5c2c52013e3 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/sama5d4.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sama5d4.dtsi
@@ -809,7 +809,7 @@
 					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
 					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
 					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
-					0x0003ff00 0x8002a800 0x00000000	/* pioD */
+					0xb003ff00 0x8002a800 0x00000000	/* pioD */
 					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
 					>;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
index 2b645642b935..2a745522404d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
@@ -12,7 +12,7 @@
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00aa";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_arria5_socdk.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 90e676e7019f..1b02d46496a8 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -119,7 +119,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 6f138b2b2616..51bb436784e2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -124,7 +124,7 @@
 	flash0: n25q00@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;	/* chip select */
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index c155ff02eb6e..cae9ddd5ed38 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -169,7 +169,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index 8d5d3996f6f2..ca18b959e655 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -80,7 +80,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
index 99a71757cdf4..3f7aa7bf0863 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -116,7 +116,7 @@
 	flash0: n25q512a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q512a";
+		compatible = "micron,n25q512a", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <100000000>;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index a060718758b6..25874e1b9c82 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -224,7 +224,7 @@
 	n25q128@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q128";
+		compatible = "micron,n25q128", "jedec,spi-nor";
 		reg = <0>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
@@ -241,7 +241,7 @@
 	n25q00@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "n25q00";
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
 		reg = <1>;		/* chip select */
 		spi-max-frequency = <100000000>;
 		m25p,fast-read;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/spear3xx.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/spear3xx.dtsi
index f266b7b03482..cc88ebe7a60c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/spear3xx.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/spear3xx.dtsi
@@ -47,7 +47,7 @@
 		};
 
 		gmac: eth@e0800000 {
-			compatible = "st,spear600-gmac";
+			compatible = "snps,dwmac-3.40a";
 			reg = <0xe0800000 0x8000>;
 			interrupts = <23 22>;
 			interrupt-names = "macirq", "eth_wake_irq";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-ab8500.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-ab8500.dtsi
index aab5719cc1a9..16d50369226a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-ab8500.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -34,7 +34,7 @@
 					#clock-cells = <1>;
 				};
 
-				ab8500_gpio: ab8500-gpio {
+				ab8500_gpio: ab8500-gpiocontroller {
 					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -42,15 +42,15 @@
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
 				gpadc: ab8500-gpadc {
 					compatible = "stericsson,ab8500-gpadc";
-					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
-						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+						     <39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "HW_CONV_END", "SW_CONV_END";
 					vddadc-supply = <&ab8500_ldo_tvout_reg>;
 					#address-cells = <1>;
@@ -169,13 +169,13 @@
 
 				ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -192,8 +192,8 @@
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-ab8505.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-ab8505.dtsi
index 67bc69e67b33..8d2cda0b4d62 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-ab8505.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -30,7 +30,7 @@
 					#clock-cells = <1>;
 				};
 
-				ab8505_gpio: ab8505-gpio {
+				ab8505_gpio: ab8505-gpiocontroller {
 					compatible = "stericsson,ab8505-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -38,8 +38,8 @@
 
 				ab8500-rtc {
 					compatible = "stericsson,ab8500-rtc";
-					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
-						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
@@ -131,13 +131,13 @@
 
 				ab8500_usb: ab8500_usb {
 					compatible = "stericsson,ab8500-usb";
-					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
-						       96 IRQ_TYPE_LEVEL_HIGH
-						       14 IRQ_TYPE_LEVEL_HIGH
-						       15 IRQ_TYPE_LEVEL_HIGH
-						       79 IRQ_TYPE_LEVEL_HIGH
-						       74 IRQ_TYPE_LEVEL_HIGH
-						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+						     <96 IRQ_TYPE_LEVEL_HIGH>,
+						     <14 IRQ_TYPE_LEVEL_HIGH>,
+						     <15 IRQ_TYPE_LEVEL_HIGH>,
+						     <79 IRQ_TYPE_LEVEL_HIGH>,
+						     <74 IRQ_TYPE_LEVEL_HIGH>,
+						     <75 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ID_WAKEUP_R",
 							  "ID_WAKEUP_F",
 							  "VBUS_DET_F",
@@ -154,8 +154,8 @@
 
 				ab8500-ponkey {
 					compatible = "stericsson,ab8500-poweron-key";
-					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
-						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+						     <7 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
 				};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-db8500.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-db8500.dtsi
index d309fad32229..344d29853bf7 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-db8500.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-db8500.dtsi
@@ -12,4 +12,42 @@
 					    200000 0>;
 		};
 	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Modem trace memory */
+		ram@06000000 {
+			reg = <0x06000000 0x00f00000>;
+			no-map;
+		};
+
+		/* Modem shared memory */
+		ram@06f00000 {
+			reg = <0x06f00000 0x00100000>;
+			no-map;
+		};
+
+		/* Modem private memory */
+		ram@07000000 {
+			reg = <0x07000000 0x01000000>;
+			no-map;
+		};
+
+		/*
+		 * Initial Secure Software ISSW memory
+		 *
+		 * This is probably only used if the kernel tries
+		 * to actually call into trustzone to run secure
+		 * applications, which the mainline kernel probably
+		 * will not do on this old chipset. But you can never
+		 * be too careful, so reserve this memory anyway.
+		 */
+		ram@17f00000 {
+			reg = <0x17f00000 0x00100000>;
+			no-map;
+		};
+	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-db8520.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-db8520.dtsi
index 48bd8728ae27..287804e9e183 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-db8520.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-db8520.dtsi
@@ -12,4 +12,42 @@
 					    200000 0>;
 		};
 	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Modem trace memory */
+		ram@06000000 {
+			reg = <0x06000000 0x00f00000>;
+			no-map;
+		};
+
+		/* Modem shared memory */
+		ram@06f00000 {
+			reg = <0x06f00000 0x00100000>;
+			no-map;
+		};
+
+		/* Modem private memory */
+		ram@07000000 {
+			reg = <0x07000000 0x01000000>;
+			no-map;
+		};
+
+		/*
+		 * Initial Secure Software ISSW memory
+		 *
+		 * This is probably only used if the kernel tries
+		 * to actually call into trustzone to run secure
+		 * applications, which the mainline kernel probably
+		 * will not do on this old chipset. But you can never
+		 * be too careful, so reserve this memory anyway.
+		 */
+		ram@17f00000 {
+			reg = <0x17f00000 0x00100000>;
+			no-map;
+		};
+	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-db9500.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-db9500.dtsi
new file mode 100644
index 000000000000..0afff703191c
--- /dev/null
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-db9500.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ste-dbx5x0.dtsi"
+
+/ {
+	cpus {
+		cpu@300 {
+			/* cpufreq controls */
+			operating-points = <1152000 0
+					    800000 0
+					    400000 0
+					    200000 0>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Initial Secure Software ISSW memory
+		 *
+		 * This is probably only used if the kernel tries
+		 * to actually call into trustzone to run secure
+		 * applications, which the mainline kernel probably
+		 * will not do on this old chipset. But you can never
+		 * be too careful, so reserve this memory anyway.
+		 */
+		ram@17f00000 {
+			reg = <0x17f00000 0x00100000>;
+			no-map;
+		};
+	};
+};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-href-ab8500.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 4946743de7b9..3ccb7b5c7162 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -9,7 +9,7 @@
 	soc {
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				ab8500-gpiocontroller {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
 					pinctrl-0 = <&gpio2_default_mode>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
index 9f285c7cf914..457bddabc32c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -8,37 +8,46 @@
 / {
 	soc {
 		i2c@80128000 {
-			/* Marked:
-			 * 129
-			 * M35
-			 * L3GD20
-			 */
-			l3gd20@6a {
-				/* Gyroscope */
-				compatible = "st,l3gd20";
-				status = "disabled";
+			accelerometer@19 {
+				compatible = "st,lsm303dlhc-accel";
 				st,drdy-int-pin = <1>;
-				drive-open-drain;
-				reg = <0x6a>; // 0x6a or 0x6b
+				reg = <0x19>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+				mount-matrix = "0", "-1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "-1";
 			};
-			/*
-			 * Marked:
-			 * 2122
-			 * C3H
-			 * DQEEE
-			 * LIS3DH?
-			 */
-			lis3dh@18 {
-				/* Accelerometer */
-				compatible = "st,lis3dh-accel";
+			magnetometer@1e {
+				compatible = "st,lsm303dlm-magn";
 				st,drdy-int-pin = <1>;
-				reg = <0x18>;
+				reg = <0x1e>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				// This interrupt is not properly working with the driver
+				// interrupt-parent = <&gpio1>;
+				// interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&accel_tvk_mode>;
+				pinctrl-0 = <&magn_tvk_mode>;
+			};
+			gyroscope@68 {
+				/* Gyroscope */
+				compatible = "st,l3g4200d-gyro";
+				reg = <0x68>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+			pressure@5c {
+				/* Barometer/pressure sensor */
+				compatible = "st,lps001wp-press";
+				reg = <0x5c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
 			};
 		};
 
@@ -54,5 +63,26 @@
 				};
 			};
 		};
+
+		pinctrl {
+			accelerometer {
+				accel_tvk_mode: accel_tvk {
+					/* Accelerometer interrupt lines 1 & 2 */
+					tvk_cfg {
+						pins = "GPIO82_C1", "GPIO83_D3";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+			magnetometer {
+				magn_tvk_mode: magn_tvk {
+					/* GPIO 32 used for DRDY, pull this down */
+					tvk_cfg {
+						pins = "GPIO32_V2";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-href.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-href.dtsi
index ff47cbf6ed3b..3586b5d7876a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-href.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-href.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include "ste-href-family-pinctrl.dtsi"
 
 / {
@@ -64,17 +65,20 @@
 					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 					linux,default-trigger = "heartbeat";
 				};
 				chan@1 {
 					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 				chan@2 {
 					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 			};
 			lp5521@34 {
@@ -88,16 +92,19 @@
 					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 				chan@1 {
 					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 				chan@2 {
 					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 			};
 			bh1780@29 {
@@ -217,7 +224,7 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				ab8500-gpiocontroller {
 				};
 
 				ab8500_usb {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 4f38aeecadb3..42abea3ea92c 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -755,14 +755,14 @@
 			status = "disabled";
 		};
 
-		vica: intc@10140000 {
+		vica: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x20>;
 		};
 
-		vicb: intc@10140020 {
+		vicb: interrupt-controller@10140020 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-snowball.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-snowball.dts
index be90e73c923e..f6e0d71f6c09 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-snowball.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-snowball.dts
@@ -4,7 +4,7 @@
  */
 
 /dts-v1/;
-#include "ste-db8500.dtsi"
+#include "ste-db9500.dtsi"
 #include "ste-href-ab8500.dtsi"
 #include "ste-href-family-pinctrl.dtsi"
 
@@ -376,7 +376,7 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpio {
+				ab8500-gpiocontroller {
 					/*
 					 * AB8500 GPIOs are numbered starting from 1, so the first
 					 * index 0 is what in the datasheet is called "GPIO1", and
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-ux500-samsung-golden.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index a1093cb37dc7..aed1f2d5f246 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -326,6 +326,7 @@
 				panel@0 {
 					compatible = "samsung,s6e63m0";
 					reg = <0>;
+					max-brightness = <15>;
 					vdd3-supply = <&panel_reg_3v0>;
 					vci-supply = <&panel_reg_1v8>;
 					reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 27722c42b61c..446d93c1c782 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -154,10 +154,6 @@
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			/* All direction control is used */
-			st,sig-dir-cmd;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-dat31;
 			st,sig-pin-fbclk;
 			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
@@ -262,10 +258,10 @@
 					};
 
 					ab8500_ldo_aux2 {
-						/* Supplies the Cypress TMA140 touchscreen only with 3.3V */
+						/* Supplies the Cypress TMA140 touchscreen only with 3.0V */
 						regulator-name = "AUX2";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
 					};
 
 					ab8500_ldo_aux3 {
@@ -284,9 +280,9 @@
 
 					ab8500_ldo_aux5 {
 						regulator-name = "AUX5";
+						/* Intended for 1V8 for touchscreen but actually left unused */
 						regulator-min-microvolt = <1050000>;
 						regulator-max-microvolt = <2790000>;
-						regulator-always-on;
 					};
 
 					ab8500_ldo_aux6 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32429i-eval.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32429i-eval.dts
index 67e7648de41e..8b0ead46ef9b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32429i-eval.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32429i-eval.dts
@@ -119,17 +119,15 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 0>;
 		};
-		button@1 {
+		button-1 {
 			label = "Tamper";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpioc 13 0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32746g-eval.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32746g-eval.dts
index ca8c192449ee..327613fd9666 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32746g-eval.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32746g-eval.dts
@@ -81,12 +81,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioc 13 0>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32f429-disco.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32f429-disco.dts
index 3dc068b91ca1..6435e099c632 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32f429-disco.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32f429-disco.dts
@@ -81,12 +81,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 0>;
@@ -194,7 +192,7 @@
 
 	display: display@1{
 		/* Connect panel-ilitek-9341 to ltdc */
-		compatible = "st,sf-tc240t-9370-t";
+		compatible = "st,sf-tc240t-9370-t", "ilitek,ili9341";
 		reg = <1>;
 		spi-3wire;
 		spi-max-frequency = <10000000>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32f429.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32f429.dtsi
index ad715a0e1c9a..0dc5fa94dbdf 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32f429.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32f429.dtsi
@@ -283,8 +283,6 @@
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
@@ -299,8 +297,6 @@
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
@@ -633,8 +629,6 @@
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
@@ -649,8 +643,6 @@
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
@@ -709,7 +701,7 @@
 			status = "disabled";
 		};
 
-		rcc: rcc@40023810 {
+		rcc: rcc@40023800 {
 			#reset-cells = <1>;
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32f469-disco.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32f469-disco.dts
index 2e1b3bbbe4b5..8c982ae79f43 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32f469-disco.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32f469-disco.dts
@@ -104,12 +104,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32f746.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32f746.dtsi
index 640ff54ed00c..d49e481b3aa6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32f746.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32f746.dtsi
@@ -265,8 +265,6 @@
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
@@ -281,8 +279,6 @@
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
@@ -364,9 +360,9 @@
 			status = "disabled";
 		};
 
-		i2c3: i2c@40005C00 {
+		i2c3: i2c@40005c00 {
 			compatible = "st,stm32f7-i2c";
-			reg = <0x40005C00 0x400>;
+			reg = <0x40005c00 0x400>;
 			interrupts = <72>,
 				     <73>;
 			resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
@@ -531,8 +527,6 @@
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
@@ -547,8 +541,6 @@
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32f769-disco.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32f769-disco.dts
index 0ce7fbc20fa4..be943b701980 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32f769-disco.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32f769-disco.dts
@@ -75,12 +75,10 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32h743.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32h743.dtsi
index 7febe19e780d..1579707ea566 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32h743.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32h743.dtsi
@@ -454,8 +454,6 @@
 		};
 
 		lptimer4: timer@58002c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58002c00 0x400>;
 			clocks = <&rcc LPTIM4_CK>;
@@ -470,8 +468,6 @@
 		};
 
 		lptimer5: timer@58003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58003000 0x400>;
 			clocks = <&rcc LPTIM5_CK>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index d84686e00370..ccf66adbbf62 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1091,7 +1091,7 @@
 		};
 	};
 
-	sai2a_pins_c: sai2a-4 {
+	sai2a_pins_c: sai2a-2 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
@@ -1102,7 +1102,7 @@
 		};
 	};
 
-	sai2a_sleep_pins_c: sai2a-5 {
+	sai2a_sleep_pins_c: sai2a-2 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
@@ -1147,14 +1147,14 @@
 		};
 	};
 
-	sai2b_pins_c: sai2a-4 {
+	sai2b_pins_c: sai2b-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
 			bias-disable;
 		};
 	};
 
-	sai2b_sleep_pins_c: sai2a-sleep-5 {
+	sai2b_sleep_pins_c: sai2b-sleep-2 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
 		};
@@ -1806,10 +1806,15 @@
 	usart2_idle_pins_c: usart2-idle-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
-				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
 				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
 			bias-disable;
 		};
@@ -1855,10 +1860,15 @@
 	usart3_idle_pins_b: usart3-idle-1 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
 				 <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
@@ -1891,10 +1901,15 @@
 	usart3_idle_pins_c: usart3-idle-2 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
 				 <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
 			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp151.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp151.dtsi
index 84757901cd8d..7a0ef01de969 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp151.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp151.dtsi
@@ -811,7 +811,7 @@
 				#sound-dai-cells = <0>;
 
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x1c>;
+				reg = <0x4 0x20>;
 				clocks = <&rcc SAI1_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 87 0x400 0x01>;
@@ -821,7 +821,7 @@
 			sai1b: audio-controller@4400a024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI1_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 88 0x400 0x01>;
@@ -842,7 +842,7 @@
 			sai2a: audio-controller@4400b004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x4 0x1c>;
+				reg = <0x4 0x20>;
 				clocks = <&rcc SAI2_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 89 0x400 0x01>;
@@ -852,7 +852,7 @@
 			sai2b: audio-controller@4400b024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI2_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 90 0x400 0x01>;
@@ -873,7 +873,7 @@
 			sai3a: audio-controller@4400c004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x1c>;
+				reg = <0x04 0x20>;
 				clocks = <&rcc SAI3_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 113 0x400 0x01>;
@@ -883,7 +883,7 @@
 			sai3b: audio-controller@4400c024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI3_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 114 0x400 0x01>;
@@ -1250,7 +1250,7 @@
 			sai4a: audio-controller@50027004 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-a";
-				reg = <0x04 0x1c>;
+				reg = <0x04 0x20>;
 				clocks = <&rcc SAI4_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 99 0x400 0x01>;
@@ -1260,7 +1260,7 @@
 			sai4b: audio-controller@50027024 {
 				#sound-dai-cells = <0>;
 				compatible = "st,stm32-sai-sub-b";
-				reg = <0x24 0x1c>;
+				reg = <0x24 0x20>;
 				clocks = <&rcc SAI4_K>;
 				clock-names = "sai_ck";
 				dmas = <&dmamux1 100 0x400 0x01>;
@@ -1395,12 +1395,6 @@
 			status = "disabled";
 		};
 
-		stmmac_axi_config_0: stmmac-axi-config {
-			snps,wr_osr_lmt = <0x7>;
-			snps,rd_osr_lmt = <0x7>;
-			snps,blen = <0 0 0 0 16 8 4>;
-		};
-
 		ethernet0: ethernet@5800a000 {
 			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
 			reg = <0x5800a000 0x2000>;
@@ -1424,6 +1418,12 @@
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
+
+			stmmac_axi_config_0: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
 		};
 
 		usbh_ohci: usbh-ohci@5800c000 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index 58275bcf9e26..4dd138d691c7 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -184,8 +184,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -208,7 +206,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -219,13 +216,13 @@
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
index 6cf49a0a9e69..2d9461006810 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi
@@ -173,8 +173,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -197,7 +195,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			 bst_out: boost {
@@ -213,7 +210,7 @@
 			 vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			 };
 		};
 
@@ -269,7 +266,7 @@
 	st,neg-edge;
 	bus-width = <8>;
 	vmmc-supply = <&v3v3>;
-	vqmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
 	mmc-ddr-3_3v;
 	status = "okay";
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp157c-odyssey.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp157c-odyssey.dts
index a7ffec8f1516..be1dd5e9e744 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -64,7 +64,7 @@
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
index 62ab23824a3e..e4d287d99421 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -35,7 +35,7 @@
 	 */
 	rs485-rx-en {
 		gpio-hog;
-		gpios = <8 GPIO_ACTIVE_HIGH>;
+		gpios = <8 0>;
 		output-low;
 		line-name = "rs485-rx-en";
 	};
@@ -63,7 +63,7 @@
 	 */
 	usb-hub {
 		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_HIGH>;
+		gpios = <2 0>;
 		output-high;
 		line-name = "usb-hub-reset";
 	};
@@ -87,6 +87,12 @@
 	};
 };
 
+&i2c4 {
+	touchscreen@49 {
+		status = "disabled";
+	};
+};
+
 &i2c5 {	/* TP7/TP8 */
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c5_pins_a>;
@@ -104,7 +110,7 @@
 	 * are used for on-board microSD slot instead.
 	 */
 	/delete-property/broken-cd;
-	cd-gpios = <&gpioi 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	cd-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>;
 	disable-wp;
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index 8456f172d4b1..fd0cd10cb093 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -34,11 +34,10 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		/*
-		 * The EXTi IRQ line 3 is shared with touchscreen and ethernet,
+		 * The EXTi IRQ line 3 is shared with ethernet,
 		 * so mark this as polled GPIO key.
 		 */
 		button-0 {
@@ -47,6 +46,16 @@
 			gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
 		};
 
+		/*
+		 * The EXTi IRQ line 6 is shared with touchscreen,
+		 * so mark this as polled GPIO key.
+		 */
+		button-1 {
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
+		};
+
 		/*
 		 * The EXTi IRQ line 0 is shared with PMIC,
 		 * so mark this as polled GPIO key.
@@ -60,14 +69,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#size-cells = <0>;
-
-		button-1 {
-			label = "TA2-GPIO-B";
-			linux,code = <KEY_B>;
-			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
 
 		button-3 {
 			label = "TA4-GPIO-D";
@@ -84,6 +85,7 @@
 			label = "green:led5";
 			gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
+			status = "disabled";
 		};
 
 		led-1 {
@@ -170,26 +172,25 @@
 			sgtl5000_tx_endpoint: endpoint@0 {
 				reg = <0>;
 				remote-endpoint = <&sai2a_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&sgtl5000_tx_endpoint>;
+				bitclock-master = <&sgtl5000_tx_endpoint>;
 			};
 
 			sgtl5000_rx_endpoint: endpoint@1 {
 				reg = <1>;
 				remote-endpoint = <&sai2b_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&sgtl5000_rx_endpoint>;
+				bitclock-master = <&sgtl5000_rx_endpoint>;
 			};
 		};
 
 	};
 
-	polytouch@38 {
-		compatible = "edt,edt-ft5x06";
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
-		interrupt-parent = <&gpiog>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-		linux,wakeup;
+		interrupt-parent = <&gpioc>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
 	};
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index f796a6150313..000af7177701 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -118,7 +118,6 @@
 	max-speed = <100>;
 	phy-handle = <&phy0>;
 	st,eth-ref-clk-sel;
-	phy-reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
 
 	mdio0 {
 		#address-cells = <1>;
@@ -127,6 +126,16 @@
 
 		phy0: ethernet-phy@1 {
 			reg = <1>;
+			/* LAN8710Ai */
+			compatible = "ethernet-phy-id0007.c0f0",
+				     "ethernet-phy-ieee802.3-c22";
+			clocks = <&rcc ETHCK_K>;
+			reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			smsc,disable-energy-detect;
+			interrupt-parent = <&gpioi>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
@@ -226,8 +235,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -249,7 +256,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -265,7 +271,7 @@
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
@@ -330,7 +336,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: mx66l51235l@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
@@ -353,7 +359,8 @@
 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>;
-	broken-cd;
+	cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
 	st,sig-dir;
 	st,neg-edge;
 	st,use-ckin;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index ec02cee1dd9b..944d38b85eef 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -185,8 +185,8 @@
 &i2c4 {
 	hdmi-transmitter@3d {
 		compatible = "adi,adv7513";
-		reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>;
+		reg-names = "main", "edid", "cec", "packet";
 		clocks = <&cec_clock>;
 		clock-names = "cec";
 
@@ -204,8 +204,6 @@
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
 		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
 
 		ports {
 			#address-cells = <1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 803eb8bc9c85..5af32140e128 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -194,11 +194,11 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: spi-flash@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;
-		spi-max-frequency = <108000000>;
+		spi-max-frequency = <50000000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 93398cfae97e..47df8ac67cf1 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -212,15 +212,15 @@
 			cs42l51_tx_endpoint: endpoint@0 {
 				reg = <0>;
 				remote-endpoint = <&sai2a_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&cs42l51_tx_endpoint>;
+				bitclock-master = <&cs42l51_tx_endpoint>;
 			};
 
 			cs42l51_rx_endpoint: endpoint@1 {
 				reg = <1>;
 				remote-endpoint = <&sai2b_endpoint>;
-				frame-master;
-				bitclock-master;
+				frame-master = <&cs42l51_rx_endpoint>;
+				bitclock-master = <&cs42l51_rx_endpoint>;
 			};
 		};
 	};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
index 713485a95795..6706d8311a66 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
@@ -146,8 +146,6 @@
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -171,7 +169,6 @@
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -182,13 +179,13 @@
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/sun7i-a20-bananapro.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index 01ccff756996..5740f9442705 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -110,7 +110,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 9ba62774e89a..488933b87ad5 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -112,7 +112,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/sun8i-a33.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sun8i-a33.dtsi
index c458f5fb124f..46f4242e9f95 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/sun8i-a33.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -46,7 +46,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -164,7 +164,7 @@
 		io-channels = <&ths>;
 	};
 
-	mali_opp_table: gpu-opp-table {
+	mali_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-144000000 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/sun8i-a83t.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sun8i-a83t.dtsi
index c010b27fdb6a..a746e449b0ba 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -200,7 +200,7 @@
 		status = "disabled";
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cluster0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -253,7 +253,7 @@
 		};
 	};
 
-	cpu1_opp_table: opp_table1 {
+	cpu1_opp_table: opp-table-cluster1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index 97f497854e05..d05fa679dcd3 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -85,7 +85,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 
 	status = "okay";
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/sun8i-h3.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sun8i-h3.dtsi
index 4e89701df91f..ae4f933abb89 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/sun8i-h3.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -44,7 +44,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -112,7 +112,7 @@
 		};
 	};
 
-	gpu_opp_table: gpu-opp-table {
+	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-120000000 {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra124-nyan-big.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra124-nyan-big.dts
index 1d2aac2cb6d0..fdc1d64dfff9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -13,12 +13,15 @@
 		     "google,nyan-big-rev1", "google,nyan-big-rev0",
 		     "google,nyan-big", "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "auo,b133xtn01";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133xtn01";
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	mmc@700b0400 { /* SD Card on this bus */
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra124-nyan-blaze.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra124-nyan-blaze.dts
index 677babde6460..abdf4456826f 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra124-nyan-blaze.dts
@@ -15,12 +15,15 @@
 		     "google,nyan-blaze-rev0", "google,nyan-blaze",
 		     "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "samsung,ltn140at29-301";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "samsung,ltn140at29-301";
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	sound {
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra124-venice2.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra124-venice2.dts
index e6b54ac1ebd1..84e2d24065e9 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra124-venice2.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra124-venice2.dts
@@ -48,6 +48,13 @@
 		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
+
+			aux-bus {
+				panel: panel {
+					compatible = "lg,lp129qe";
+					backlight = <&backlight>;
+				};
+			};
 		};
 	};
 
@@ -1079,13 +1086,6 @@
 		};
 	};
 
-	panel: panel {
-		compatible = "lg,lp129qe";
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
 	vdd_mux: regulator@0 {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index a0b829738e8f..5dbfb83c1b06 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -448,7 +448,7 @@
 
 			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
 
-			avdd-supply = <&vdd_3v3_sys>;
+			vdda-supply = <&vdd_3v3_sys>;
 			vdd-supply  = <&vdd_3v3_sys>;
 		};
 
@@ -704,7 +704,6 @@
 		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_vbus1>;
 	};
 
 	usb@c5008000 {
@@ -716,7 +715,7 @@
 		nvidia,xcvr-setup-use-fuses;
 		nvidia,xcvr-lsfslew = <2>;
 		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_vbus3>;
+		vbus-supply = <&vdd_5v0_sys>;
 	};
 
 	brcm_wifi_pwrseq: wifi-pwrseq {
@@ -967,28 +966,6 @@
 		vin-supply = <&vdd_5v0_sys>;
 	};
 
-	vdd_vbus1: regulator@4 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_usb1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_vbus3: regulator@5 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_usb3_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		gpio = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
 	sound {
 		compatible = "nvidia,tegra-audio-wm8903-picasso",
 			     "nvidia,tegra-audio-wm8903";
@@ -1009,7 +986,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
 		nvidia,headset;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-harmony.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-harmony.dts
index 86494cb4d5a1..ae4312eedcbd 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-harmony.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-harmony.dts
@@ -748,7 +748,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
 			GPIO_ACTIVE_HIGH>;
 		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-medcom-wide.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-medcom-wide.dts
index a348ca30e522..b31c9bca16e6 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -84,7 +84,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-plutux.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-plutux.dts
index 378f23b2958b..5811b7006a9b 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-plutux.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-plutux.dts
@@ -52,7 +52,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-seaboard.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-seaboard.dts
index c24d4a37613e..92d494b8c3d2 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-seaboard.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -911,7 +911,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-tamonten.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 95e6bccdb4f6..dd4d506683de 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -185,8 +185,9 @@
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
 					"cdev1", "cdev2", "dap1", "dtb", "gma",
 					"gmb", "gmc", "gmd", "gme", "gpu7",
-					"gpv", "i2cp", "pta", "rm", "slxa",
-					"slxk", "spia", "spib", "uac";
+					"gpv", "i2cp", "irrx", "irtx", "pta",
+					"rm", "slxa", "slxk", "spia", "spib",
+					"uac";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -211,7 +212,7 @@
 			conf_ddc {
 				nvidia,pins = "ddc", "dta", "dtd", "kbca",
 					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
-					"sdc";
+					"sdc", "uad", "uca";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -221,10 +222,9 @@
 					"lvp0", "owc", "sdb";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			conf_irrx {
-				nvidia,pins = "irrx", "irtx", "sdd", "spic",
-					"spie", "spih", "uaa", "uab", "uad",
-					"uca", "ucb";
+			conf_sdd {
+				nvidia,pins = "sdd", "spic", "spie", "spih",
+					"uaa", "uab", "ucb";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-tec.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-tec.dts
index 44ced60315de..10ff09d86efa 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-tec.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-tec.dts
@@ -61,7 +61,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
 			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-ventana.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-ventana.dts
index b158771ac0b7..fe400fb84f02 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra20-ventana.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra20-ventana.dts
@@ -3,6 +3,7 @@
 
 #include <dt-bindings/input/input.h>
 #include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
 
 / {
 	model = "NVIDIA Tegra20 Ventana evaluation board";
@@ -592,6 +593,16 @@
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -675,7 +686,7 @@
 		nvidia,audio-codec = <&wm8903>;
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
 		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
 			GPIO_ACTIVE_HIGH>;
 		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
index bfc06b988781..215e497652d8 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
@@ -143,7 +143,7 @@
 	};
 
 	vdd_3v3_sys: regulator@1 {
-		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 };
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra30-cardhu.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra30-cardhu.dtsi
index dab9989fa760..57aead7d8162 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -589,7 +589,7 @@
 
 		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
 		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
-			GPIO_ACTIVE_HIGH>;
+			GPIO_ACTIVE_LOW>;
 
 		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
 			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/uniphier-pxs2.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/uniphier-pxs2.dtsi
index b0b15c97306b..e81e5937a60a 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -583,7 +583,7 @@
 			clocks = <&sys_clk 6>;
 			reset-names = "ether";
 			resets = <&sys_rst 6>;
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			local-mac-address = [00 00 00 00 00 00];
 			socionext,syscon-phy-mode = <&soc_glue 0>;
 
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/versatile-ab.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/versatile-ab.dts
index 37bd41ff8dff..151c0220047d 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/versatile-ab.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/versatile-ab.dts
@@ -195,16 +195,15 @@
 		#size-cells = <1>;
 		ranges;
 
-		vic: intc@10140000 {
+		vic: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x1000>;
-			clear-mask = <0xffffffff>;
 			valid-mask = <0xffffffff>;
 		};
 
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			compatible = "arm,versatile-sic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/versatile-pb.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/versatile-pb.dts
index 06a0fdf24026..e7e751a858d8 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/versatile-pb.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/versatile-pb.dts
@@ -7,7 +7,7 @@
 
 	amba {
 		/* The Versatile PB is using more SIC IRQ lines than the AB */
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			clear-mask = <0xffffffff>;
 			/*
 			 * Valid interrupt lines mask according to
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/vexpress-v2m.dtsi linux-libre-5.10.108-gnu1/arch/arm/boot/dts/vexpress-v2m.dtsi
index 2ac41ed3a57c..659dcf4004b4 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -19,7 +19,7 @@
  */
 
 / {
-	bus@4000000 {
+	bus@40000000 {
 		motherboard {
 			model = "V2M-P1";
 			arm,hbi = <0x190>;
diff --git linux-libre-5.10-gnu1/arch/arm/boot/dts/vexpress-v2p-ca9.dts linux-libre-5.10.108-gnu1/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 4c5847955856..1317f0f58d53 100644
--- linux-libre-5.10-gnu1/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ linux-libre-5.10.108-gnu1/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -295,7 +295,7 @@
 		};
 	};
 
-	smb: bus@4000000 {
+	smb: bus@40000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git linux-libre-5.10-gnu1/arch/arm/crypto/aes-ce-core.S linux-libre-5.10.108-gnu1/arch/arm/crypto/aes-ce-core.S
index 4d1707388d94..312428d83eed 100644
--- linux-libre-5.10-gnu1/arch/arm/crypto/aes-ce-core.S
+++ linux-libre-5.10.108-gnu1/arch/arm/crypto/aes-ce-core.S
@@ -386,20 +386,32 @@ ENTRY(ce_aes_ctr_encrypt)
 .Lctrloop4x:
 	subs		r4, r4, #4
 	bmi		.Lctr1x
-	add		r6, r6, #1
+
+	/*
+	 * NOTE: the sequence below has been carefully tweaked to avoid
+	 * a silicon erratum that exists in Cortex-A57 (#1742098) and
+	 * Cortex-A72 (#1655431) cores, where AESE/AESMC instruction pairs
+	 * may produce an incorrect result if they take their input from a
+	 * register of which a single 32-bit lane has been updated the last
+	 * time it was modified. To work around this, the lanes of registers
+	 * q0-q3 below are not manipulated individually, and the different
+	 * counter values are prepared by successive manipulations of q7.
+	 */
+	add		ip, r6, #1
 	vmov		q0, q7
+	rev		ip, ip
+	add		lr, r6, #2
+	vmov		s31, ip			@ set lane 3 of q1 via q7
+	add		ip, r6, #3
+	rev		lr, lr
 	vmov		q1, q7
-	rev		ip, r6
-	add		r6, r6, #1
+	vmov		s31, lr			@ set lane 3 of q2 via q7
+	rev		ip, ip
 	vmov		q2, q7
-	vmov		s7, ip
-	rev		ip, r6
-	add		r6, r6, #1
+	vmov		s31, ip			@ set lane 3 of q3 via q7
+	add		r6, r6, #4
 	vmov		q3, q7
-	vmov		s11, ip
-	rev		ip, r6
-	add		r6, r6, #1
-	vmov		s15, ip
+
 	vld1.8		{q4-q5}, [r1]!
 	vld1.8		{q6}, [r1]!
 	vld1.8		{q15}, [r1]!
diff --git linux-libre-5.10-gnu1/arch/arm/crypto/aes-neonbs-glue.c linux-libre-5.10.108-gnu1/arch/arm/crypto/aes-neonbs-glue.c
index bda8bf17631e..f70af1d0514b 100644
--- linux-libre-5.10-gnu1/arch/arm/crypto/aes-neonbs-glue.c
+++ linux-libre-5.10.108-gnu1/arch/arm/crypto/aes-neonbs-glue.c
@@ -19,7 +19,7 @@ MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
 MODULE_LICENSE("GPL v2");
 
 MODULE_ALIAS_CRYPTO("ecb(aes)");
-MODULE_ALIAS_CRYPTO("cbc(aes)");
+MODULE_ALIAS_CRYPTO("cbc(aes)-all");
 MODULE_ALIAS_CRYPTO("ctr(aes)");
 MODULE_ALIAS_CRYPTO("xts(aes)");
 
@@ -191,7 +191,8 @@ static int cbc_init(struct crypto_skcipher *tfm)
 	struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
 	unsigned int reqsize;
 
-	ctx->enc_tfm = crypto_alloc_skcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
+	ctx->enc_tfm = crypto_alloc_skcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC |
+					     CRYPTO_ALG_NEED_FALLBACK);
 	if (IS_ERR(ctx->enc_tfm))
 		return PTR_ERR(ctx->enc_tfm);
 
@@ -441,7 +442,8 @@ static struct skcipher_alg aes_algs[] = { {
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
 	.base.cra_ctxsize	= sizeof(struct aesbs_cbc_ctx),
 	.base.cra_module	= THIS_MODULE,
-	.base.cra_flags		= CRYPTO_ALG_INTERNAL,
+	.base.cra_flags		= CRYPTO_ALG_INTERNAL |
+				  CRYPTO_ALG_NEED_FALLBACK,
 
 	.min_keysize		= AES_MIN_KEY_SIZE,
 	.max_keysize		= AES_MAX_KEY_SIZE,
diff --git linux-libre-5.10-gnu1/arch/arm/crypto/curve25519-core.S linux-libre-5.10.108-gnu1/arch/arm/crypto/curve25519-core.S
index be18af52e7dc..b697fa5d059a 100644
--- linux-libre-5.10-gnu1/arch/arm/crypto/curve25519-core.S
+++ linux-libre-5.10.108-gnu1/arch/arm/crypto/curve25519-core.S
@@ -10,8 +10,8 @@
 #include <linux/linkage.h>
 
 .text
-.fpu neon
 .arch armv7-a
+.fpu neon
 .align 4
 
 ENTRY(curve25519_neon)
diff --git linux-libre-5.10-gnu1/arch/arm/crypto/poly1305-glue.c linux-libre-5.10.108-gnu1/arch/arm/crypto/poly1305-glue.c
index 3023c1acfa19..c31bd8f7c092 100644
--- linux-libre-5.10-gnu1/arch/arm/crypto/poly1305-glue.c
+++ linux-libre-5.10.108-gnu1/arch/arm/crypto/poly1305-glue.c
@@ -29,7 +29,7 @@ void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit)
 
 static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
 
-void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key)
+void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE])
 {
 	poly1305_init_arm(&dctx->h, key);
 	dctx->s[0] = get_unaligned_le32(key + 16);
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/Kbuild linux-libre-5.10.108-gnu1/arch/arm/include/asm/Kbuild
index 383635b68763..f1398b9267c0 100644
--- linux-libre-5.10-gnu1/arch/arm/include/asm/Kbuild
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/Kbuild
@@ -2,7 +2,6 @@
 generic-y += early_ioremap.h
 generic-y += extable.h
 generic-y += flat.h
-generic-y += local64.h
 generic-y += parport.h
 generic-y += seccomp.h
 
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/assembler.h linux-libre-5.10.108-gnu1/arch/arm/include/asm/assembler.h
index feac2c8b86f2..24a1f498b3b5 100644
--- linux-libre-5.10-gnu1/arch/arm/include/asm/assembler.h
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/assembler.h
@@ -107,6 +107,16 @@
 	.endm
 #endif
 
+#if __LINUX_ARM_ARCH__ < 7
+	.macro	dsb, args
+	mcr	p15, 0, r0, c7, c10, 4
+	.endm
+
+	.macro	isb, args
+	mcr	p15, 0, r0, c7, c5, 4
+	.endm
+#endif
+
 	.macro asm_trace_hardirqs_off, save=1
 #if defined(CONFIG_TRACE_IRQFLAGS)
 	.if \save
@@ -494,4 +504,88 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 #define _ASM_NOKPROBE(entry)
 #endif
 
+	.macro		__adldst_l, op, reg, sym, tmp, c
+	.if		__LINUX_ARM_ARCH__ < 7
+	ldr\c		\tmp, .La\@
+	.subsection	1
+	.align		2
+.La\@:	.long		\sym - .Lpc\@
+	.previous
+	.else
+	.ifnb		\c
+ THUMB(	ittt		\c			)
+	.endif
+	movw\c		\tmp, #:lower16:\sym - .Lpc\@
+	movt\c		\tmp, #:upper16:\sym - .Lpc\@
+	.endif
+
+#ifndef CONFIG_THUMB2_KERNEL
+	.set		.Lpc\@, . + 8			// PC bias
+	.ifc		\op, add
+	add\c		\reg, \tmp, pc
+	.else
+	\op\c		\reg, [pc, \tmp]
+	.endif
+#else
+.Lb\@:	add\c		\tmp, \tmp, pc
+	/*
+	 * In Thumb-2 builds, the PC bias depends on whether we are currently
+	 * emitting into a .arm or a .thumb section. The size of the add opcode
+	 * above will be 2 bytes when emitting in Thumb mode and 4 bytes when
+	 * emitting in ARM mode, so let's use this to account for the bias.
+	 */
+	.set		.Lpc\@, . + (. - .Lb\@)
+
+	.ifnc		\op, add
+	\op\c		\reg, [\tmp]
+	.endif
+#endif
+	.endm
+
+	/*
+	 * mov_l - move a constant value or [relocated] address into a register
+	 */
+	.macro		mov_l, dst:req, imm:req
+	.if		__LINUX_ARM_ARCH__ < 7
+	ldr		\dst, =\imm
+	.else
+	movw		\dst, #:lower16:\imm
+	movt		\dst, #:upper16:\imm
+	.endif
+	.endm
+
+	/*
+	 * adr_l - adr pseudo-op with unlimited range
+	 *
+	 * @dst: destination register
+	 * @sym: name of the symbol
+	 * @cond: conditional opcode suffix
+	 */
+	.macro		adr_l, dst:req, sym:req, cond
+	__adldst_l	add, \dst, \sym, \dst, \cond
+	.endm
+
+	/*
+	 * ldr_l - ldr <literal> pseudo-op with unlimited range
+	 *
+	 * @dst: destination register
+	 * @sym: name of the symbol
+	 * @cond: conditional opcode suffix
+	 */
+	.macro		ldr_l, dst:req, sym:req, cond
+	__adldst_l	ldr, \dst, \sym, \dst, \cond
+	.endm
+
+	/*
+	 * str_l - str <literal> pseudo-op with unlimited range
+	 *
+	 * @src: source register
+	 * @sym: name of the symbol
+	 * @tmp: mandatory scratch register
+	 * @cond: conditional opcode suffix
+	 */
+	.macro		str_l, src:req, sym:req, tmp:req, cond
+	__adldst_l	str, \src, \sym, \tmp, \cond
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/cpuidle.h linux-libre-5.10.108-gnu1/arch/arm/include/asm/cpuidle.h
index 0d67ed682e07..bc4ffa7ca04c 100644
--- linux-libre-5.10-gnu1/arch/arm/include/asm/cpuidle.h
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/cpuidle.h
@@ -7,9 +7,11 @@
 #ifdef CONFIG_CPU_IDLE
 extern int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
 		struct cpuidle_driver *drv, int index);
+#define __cpuidle_method_section __used __section("__cpuidle_method_of_table")
 #else
 static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
 		struct cpuidle_driver *drv, int index) { return -ENODEV; }
+#define __cpuidle_method_section __maybe_unused /* drop silently */
 #endif
 
 /* Common ARM WFI state */
@@ -42,8 +44,7 @@ struct of_cpuidle_method {
 
 #define CPUIDLE_METHOD_OF_DECLARE(name, _method, _ops)			\
 	static const struct of_cpuidle_method __cpuidle_method_of_table_##name \
-	__used __section("__cpuidle_method_of_table")			\
-	= { .method = _method, .ops = _ops }
+	__cpuidle_method_section = { .method = _method, .ops = _ops }
 
 extern int arm_cpuidle_suspend(int index);
 
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/fixmap.h linux-libre-5.10.108-gnu1/arch/arm/include/asm/fixmap.h
index fc56fc3e1931..9575b404019c 100644
--- linux-libre-5.10-gnu1/arch/arm/include/asm/fixmap.h
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/fixmap.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_FIXMAP_H
 #define _ASM_FIXMAP_H
 
-#define FIXADDR_START		0xffc00000UL
+#define FIXADDR_START		0xffc80000UL
 #define FIXADDR_END		0xfff00000UL
 #define FIXADDR_TOP		(FIXADDR_END - PAGE_SIZE)
 
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/ftrace.h linux-libre-5.10.108-gnu1/arch/arm/include/asm/ftrace.h
index 48ec1d0337da..a4dbac07e4ef 100644
--- linux-libre-5.10-gnu1/arch/arm/include/asm/ftrace.h
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/ftrace.h
@@ -15,6 +15,9 @@ extern void __gnu_mcount_nc(void);
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 struct dyn_arch_ftrace {
+#ifdef CONFIG_ARM_MODULE_PLTS
+	struct module *mod;
+#endif
 };
 
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/insn.h linux-libre-5.10.108-gnu1/arch/arm/include/asm/insn.h
index f20e08ac85ae..5475cbf9fb6b 100644
--- linux-libre-5.10-gnu1/arch/arm/include/asm/insn.h
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/insn.h
@@ -13,18 +13,18 @@ arm_gen_nop(void)
 }
 
 unsigned long
-__arm_gen_branch(unsigned long pc, unsigned long addr, bool link);
+__arm_gen_branch(unsigned long pc, unsigned long addr, bool link, bool warn);
 
 static inline unsigned long
 arm_gen_branch(unsigned long pc, unsigned long addr)
 {
-	return __arm_gen_branch(pc, addr, false);
+	return __arm_gen_branch(pc, addr, false, true);
 }
 
 static inline unsigned long
-arm_gen_branch_link(unsigned long pc, unsigned long addr)
+arm_gen_branch_link(unsigned long pc, unsigned long addr, bool warn)
 {
-	return __arm_gen_branch(pc, addr, true);
+	return __arm_gen_branch(pc, addr, true, warn);
 }
 
 #endif
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/kexec-internal.h linux-libre-5.10.108-gnu1/arch/arm/include/asm/kexec-internal.h
new file mode 100644
index 000000000000..ecc2322db7aa
--- /dev/null
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/kexec-internal.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ARM_KEXEC_INTERNAL_H
+#define _ARM_KEXEC_INTERNAL_H
+
+struct kexec_relocate_data {
+	unsigned long kexec_start_address;
+	unsigned long kexec_indirection_page;
+	unsigned long kexec_mach_type;
+	unsigned long kexec_r2;
+};
+
+#endif
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/memory.h linux-libre-5.10.108-gnu1/arch/arm/include/asm/memory.h
index 99035b5891ef..f717d7122d9d 100644
--- linux-libre-5.10-gnu1/arch/arm/include/asm/memory.h
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/memory.h
@@ -67,6 +67,10 @@
  */
 #define XIP_VIRT_ADDR(physaddr)  (MODULES_VADDR + ((physaddr) & 0x000fffff))
 
+#define FDT_FIXED_BASE		UL(0xff800000)
+#define FDT_FIXED_SIZE		(2 * SECTION_SIZE)
+#define FDT_VIRT_BASE(physbase)	((void *)(FDT_FIXED_BASE | (physbase) % SECTION_SIZE))
+
 #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
 /*
  * Allow 16MB-aligned ioremap pages
@@ -107,6 +111,7 @@ extern unsigned long vectors_base;
 #define MODULES_VADDR		PAGE_OFFSET
 
 #define XIP_VIRT_ADDR(physaddr)  (physaddr)
+#define FDT_VIRT_BASE(physbase)  ((void *)(physbase))
 
 #endif /* !CONFIG_MMU */
 
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/module.h linux-libre-5.10.108-gnu1/arch/arm/include/asm/module.h
index 4b0df09cbe67..cfffae67c04e 100644
--- linux-libre-5.10-gnu1/arch/arm/include/asm/module.h
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/module.h
@@ -19,8 +19,18 @@ enum {
 };
 #endif
 
+#define PLT_ENT_STRIDE		L1_CACHE_BYTES
+#define PLT_ENT_COUNT		(PLT_ENT_STRIDE / sizeof(u32))
+#define PLT_ENT_SIZE		(sizeof(struct plt_entries) / PLT_ENT_COUNT)
+
+struct plt_entries {
+	u32	ldr[PLT_ENT_COUNT];
+	u32	lit[PLT_ENT_COUNT];
+};
+
 struct mod_plt_sec {
 	struct elf32_shdr	*plt;
+	struct plt_entries	*plt_ent;
 	int			plt_count;
 };
 
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/prom.h linux-libre-5.10.108-gnu1/arch/arm/include/asm/prom.h
index 1e36c40533c1..402e3f34c7ed 100644
--- linux-libre-5.10-gnu1/arch/arm/include/asm/prom.h
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/prom.h
@@ -9,12 +9,12 @@
 
 #ifdef CONFIG_OF
 
-extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys);
+extern const struct machine_desc *setup_machine_fdt(void *dt_virt);
 extern void __init arm_dt_init_cpu_maps(void);
 
 #else /* CONFIG_OF */
 
-static inline const struct machine_desc *setup_machine_fdt(unsigned int dt_phys)
+static inline const struct machine_desc *setup_machine_fdt(void *dt_virt)
 {
 	return NULL;
 }
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/spectre.h linux-libre-5.10.108-gnu1/arch/arm/include/asm/spectre.h
new file mode 100644
index 000000000000..85f9e538fb32
--- /dev/null
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/spectre.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_SPECTRE_H
+#define __ASM_SPECTRE_H
+
+enum {
+	SPECTRE_UNAFFECTED,
+	SPECTRE_MITIGATED,
+	SPECTRE_VULNERABLE,
+};
+
+enum {
+	__SPECTRE_V2_METHOD_BPIALL,
+	__SPECTRE_V2_METHOD_ICIALLU,
+	__SPECTRE_V2_METHOD_SMC,
+	__SPECTRE_V2_METHOD_HVC,
+	__SPECTRE_V2_METHOD_LOOP8,
+};
+
+enum {
+	SPECTRE_V2_METHOD_BPIALL = BIT(__SPECTRE_V2_METHOD_BPIALL),
+	SPECTRE_V2_METHOD_ICIALLU = BIT(__SPECTRE_V2_METHOD_ICIALLU),
+	SPECTRE_V2_METHOD_SMC = BIT(__SPECTRE_V2_METHOD_SMC),
+	SPECTRE_V2_METHOD_HVC = BIT(__SPECTRE_V2_METHOD_HVC),
+	SPECTRE_V2_METHOD_LOOP8 = BIT(__SPECTRE_V2_METHOD_LOOP8),
+};
+
+#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES
+void spectre_v2_update_state(unsigned int state, unsigned int methods);
+#else
+static inline void spectre_v2_update_state(unsigned int state,
+					   unsigned int methods)
+{}
+#endif
+
+int spectre_bhb_update_vectors(unsigned int method);
+
+#endif
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/uaccess.h linux-libre-5.10.108-gnu1/arch/arm/include/asm/uaccess.h
index a13d90206472..d9db752c51fe 100644
--- linux-libre-5.10-gnu1/arch/arm/include/asm/uaccess.h
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/uaccess.h
@@ -200,6 +200,7 @@ extern int __get_user_64t_4(void *);
 		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		unsigned int __ua_flags = uaccess_save_and_enable();	\
+		int __tmp_e;						\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
 			if (sizeof((x)) >= 8)				\
@@ -227,9 +228,10 @@ extern int __get_user_64t_4(void *);
 			break;						\
 		default: __e = __get_user_bad(); break;			\
 		}							\
+		__tmp_e = __e;						\
 		uaccess_restore(__ua_flags);				\
 		x = (typeof(*(p))) __r2;				\
-		__e;							\
+		__tmp_e;						\
 	})
 
 #define get_user(x, p)							\
diff --git linux-libre-5.10-gnu1/arch/arm/include/asm/vmlinux.lds.h linux-libre-5.10.108-gnu1/arch/arm/include/asm/vmlinux.lds.h
index 4a91428c324d..fad45c884e98 100644
--- linux-libre-5.10-gnu1/arch/arm/include/asm/vmlinux.lds.h
+++ linux-libre-5.10.108-gnu1/arch/arm/include/asm/vmlinux.lds.h
@@ -26,6 +26,19 @@
 #define ARM_MMU_DISCARD(x)	x
 #endif
 
+/*
+ * ld.lld does not support NOCROSSREFS:
+ * https://github.com/ClangBuiltLinux/linux/issues/1609
+ */
+#ifdef CONFIG_LD_IS_LLD
+#define NOCROSSREFS
+#endif
+
+/* Set start/end symbol names to the LMA for the section */
+#define ARM_LMA(sym, section)						\
+	sym##_start = LOADADDR(section);				\
+	sym##_end = LOADADDR(section) + SIZEOF(section)
+
 #define PROC_INFO							\
 		. = ALIGN(4);						\
 		__proc_info_begin = .;					\
@@ -110,19 +123,31 @@
  * only thing that matters is their relative offsets
  */
 #define ARM_VECTORS							\
-	__vectors_start = .;						\
-	.vectors 0xffff0000 : AT(__vectors_start) {			\
-		*(.vectors)						\
+	__vectors_lma = .;						\
+	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
+		.vectors {						\
+			*(.vectors)					\
+		}							\
+		.vectors.bhb.loop8 {					\
+			*(.vectors.bhb.loop8)				\
+		}							\
+		.vectors.bhb.bpiall {					\
+			*(.vectors.bhb.bpiall)				\
+		}							\
 	}								\
-	. = __vectors_start + SIZEOF(.vectors);				\
-	__vectors_end = .;						\
+	ARM_LMA(__vectors, .vectors);					\
+	ARM_LMA(__vectors_bhb_loop8, .vectors.bhb.loop8);		\
+	ARM_LMA(__vectors_bhb_bpiall, .vectors.bhb.bpiall);		\
+	. = __vectors_lma + SIZEOF(.vectors) +				\
+		SIZEOF(.vectors.bhb.loop8) +				\
+		SIZEOF(.vectors.bhb.bpiall);				\
 									\
-	__stubs_start = .;						\
-	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {		\
+	__stubs_lma = .;						\
+	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_lma) {		\
 		*(.stubs)						\
 	}								\
-	. = __stubs_start + SIZEOF(.stubs);				\
-	__stubs_end = .;						\
+	ARM_LMA(__stubs, .stubs);					\
+	. = __stubs_lma + SIZEOF(.stubs);				\
 									\
 	PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
 
diff --git linux-libre-5.10-gnu1/arch/arm/include/debug/imx-uart.h linux-libre-5.10.108-gnu1/arch/arm/include/debug/imx-uart.h
index c8eb83d4b896..3edbb3c5b42b 100644
--- linux-libre-5.10-gnu1/arch/arm/include/debug/imx-uart.h
+++ linux-libre-5.10.108-gnu1/arch/arm/include/debug/imx-uart.h
@@ -11,13 +11,6 @@
 #define IMX1_UART_BASE_ADDR(n)	IMX1_UART##n##_BASE_ADDR
 #define IMX1_UART_BASE(n)	IMX1_UART_BASE_ADDR(n)
 
-#define IMX21_UART1_BASE_ADDR	0x1000a000
-#define IMX21_UART2_BASE_ADDR	0x1000b000
-#define IMX21_UART3_BASE_ADDR	0x1000c000
-#define IMX21_UART4_BASE_ADDR	0x1000d000
-#define IMX21_UART_BASE_ADDR(n)	IMX21_UART##n##_BASE_ADDR
-#define IMX21_UART_BASE(n)	IMX21_UART_BASE_ADDR(n)
-
 #define IMX25_UART1_BASE_ADDR	0x43f90000
 #define IMX25_UART2_BASE_ADDR	0x43f94000
 #define IMX25_UART3_BASE_ADDR	0x5000c000
@@ -26,6 +19,13 @@
 #define IMX25_UART_BASE_ADDR(n)	IMX25_UART##n##_BASE_ADDR
 #define IMX25_UART_BASE(n)	IMX25_UART_BASE_ADDR(n)
 
+#define IMX27_UART1_BASE_ADDR	0x1000a000
+#define IMX27_UART2_BASE_ADDR	0x1000b000
+#define IMX27_UART3_BASE_ADDR	0x1000c000
+#define IMX27_UART4_BASE_ADDR	0x1000d000
+#define IMX27_UART_BASE_ADDR(n)	IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n)	IMX27_UART_BASE_ADDR(n)
+
 #define IMX31_UART1_BASE_ADDR	0x43f90000
 #define IMX31_UART2_BASE_ADDR	0x43f94000
 #define IMX31_UART3_BASE_ADDR	0x5000c000
@@ -112,10 +112,10 @@
 
 #ifdef CONFIG_DEBUG_IMX1_UART
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX1)
-#elif defined(CONFIG_DEBUG_IMX21_IMX27_UART)
-#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX21)
 #elif defined(CONFIG_DEBUG_IMX25_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX27)
 #elif defined(CONFIG_DEBUG_IMX31_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX31)
 #elif defined(CONFIG_DEBUG_IMX35_UART)
diff --git linux-libre-5.10-gnu1/arch/arm/include/debug/tegra.S linux-libre-5.10.108-gnu1/arch/arm/include/debug/tegra.S
index 98daa7f48314..7454480d084b 100644
--- linux-libre-5.10-gnu1/arch/arm/include/debug/tegra.S
+++ linux-libre-5.10.108-gnu1/arch/arm/include/debug/tegra.S
@@ -149,7 +149,34 @@
 
 		.align
 99:		.word	.
+#if defined(ZIMAGE)
+		.word	. + 4
+/*
+ * Storage for the state maintained by the macro.
+ *
+ * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c.
+ * That's because this header is included from multiple files, and we only
+ * want a single copy of the data. In particular, the UART probing code above
+ * assumes it's running using physical addresses. This is true when this file
+ * is included from head.o, but not when included from debug.o. So we need
+ * to share the probe results between the two copies, rather than having
+ * to re-run the probing again later.
+ *
+ * In the decompressor, we put the storage right here, since common.c
+ * isn't included in the decompressor build. This storage data gets put in
+ * .text even though it's really data, since .data is discarded from the
+ * decompressor. Luckily, .text is writeable in the decompressor, unless
+ * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
+ */
+		/* Debug UART initialization required */
+		.word	1
+		/* Debug UART physical address */
+		.word	0
+		/* Debug UART virtual address */
+		.word	0
+#else
 		.word	tegra_uart_config
+#endif
 		.ltorg
 
 		/* Load previously selected UART address */
@@ -189,30 +216,3 @@
 
 		.macro	waituarttxrdy,rd,rx
 		.endm
-
-/*
- * Storage for the state maintained by the macros above.
- *
- * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c.
- * That's because this header is included from multiple files, and we only
- * want a single copy of the data. In particular, the UART probing code above
- * assumes it's running using physical addresses. This is true when this file
- * is included from head.o, but not when included from debug.o. So we need
- * to share the probe results between the two copies, rather than having
- * to re-run the probing again later.
- *
- * In the decompressor, we put the symbol/storage right here, since common.c
- * isn't included in the decompressor build. This symbol gets put in .text
- * even though it's really data, since .data is discarded from the
- * decompressor. Luckily, .text is writeable in the decompressor, unless
- * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
- */
-#if defined(ZIMAGE)
-tegra_uart_config:
-	/* Debug UART initialization required */
-	.word 1
-	/* Debug UART physical address */
-	.word 0
-	/* Debug UART virtual address */
-	.word 0
-#endif
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/Makefile linux-libre-5.10.108-gnu1/arch/arm/kernel/Makefile
index 89e5d864e923..79588b562353 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/Makefile
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/Makefile
@@ -106,4 +106,6 @@ endif
 
 obj-$(CONFIG_HAVE_ARM_SMCCC)	+= smccc-call.o
 
+obj-$(CONFIG_GENERIC_CPU_VULNERABILITIES) += spectre.o
+
 extra-y := $(head-y) vmlinux.lds
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/asm-offsets.c linux-libre-5.10.108-gnu1/arch/arm/kernel/asm-offsets.c
index a1570c8bab25..70993af22d80 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/asm-offsets.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/asm-offsets.c
@@ -12,6 +12,7 @@
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
+#include <asm/kexec-internal.h>
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/mach/arch.h>
@@ -23,6 +24,7 @@
 #include <asm/vdso_datapage.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <linux/kbuild.h>
+#include <linux/arm-smccc.h>
 #include "signal.h"
 
 /*
@@ -147,6 +149,8 @@ int main(void)
   DEFINE(SLEEP_SAVE_SP_PHYS,	offsetof(struct sleep_save_sp, save_ptr_stash_phys));
   DEFINE(SLEEP_SAVE_SP_VIRT,	offsetof(struct sleep_save_sp, save_ptr_stash));
 #endif
+  DEFINE(ARM_SMCCC_QUIRK_ID_OFFS,	offsetof(struct arm_smccc_quirk, id));
+  DEFINE(ARM_SMCCC_QUIRK_STATE_OFFS,	offsetof(struct arm_smccc_quirk, state));
   BLANK();
   DEFINE(DMA_BIDIRECTIONAL,	DMA_BIDIRECTIONAL);
   DEFINE(DMA_TO_DEVICE,		DMA_TO_DEVICE);
@@ -170,5 +174,9 @@ int main(void)
   DEFINE(MPU_RGN_PRBAR,	offsetof(struct mpu_rgn, prbar));
   DEFINE(MPU_RGN_PRLAR,	offsetof(struct mpu_rgn, prlar));
 #endif
+  DEFINE(KEXEC_START_ADDR,	offsetof(struct kexec_relocate_data, kexec_start_address));
+  DEFINE(KEXEC_INDIR_PAGE,	offsetof(struct kexec_relocate_data, kexec_indirection_page));
+  DEFINE(KEXEC_MACH_TYPE,	offsetof(struct kexec_relocate_data, kexec_mach_type));
+  DEFINE(KEXEC_R2,		offsetof(struct kexec_relocate_data, kexec_r2));
   return 0; 
 }
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/atags.h linux-libre-5.10.108-gnu1/arch/arm/kernel/atags.h
index 067e12edc341..f2819c25b602 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/atags.h
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/atags.h
@@ -2,11 +2,11 @@
 void convert_to_tag_list(struct tag *tags);
 
 #ifdef CONFIG_ATAGS
-const struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer,
+const struct machine_desc *setup_machine_tags(void *__atags_vaddr,
 	unsigned int machine_nr);
 #else
 static inline const struct machine_desc * __init __noreturn
-setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+setup_machine_tags(void *__atags_vaddr, unsigned int machine_nr)
 {
 	early_print("no ATAGS support: can't continue\n");
 	while (true);
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/atags_parse.c linux-libre-5.10.108-gnu1/arch/arm/kernel/atags_parse.c
index 6c12d9fe694e..373b61f9a4f0 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/atags_parse.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/atags_parse.c
@@ -174,7 +174,7 @@ static void __init squash_mem_tags(struct tag *tag)
 }
 
 const struct machine_desc * __init
-setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+setup_machine_tags(void *atags_vaddr, unsigned int machine_nr)
 {
 	struct tag *tags = (struct tag *)&default_tags;
 	const struct machine_desc *mdesc = NULL, *p;
@@ -195,8 +195,8 @@ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
 	if (!mdesc)
 		return NULL;
 
-	if (__atags_pointer)
-		tags = phys_to_virt(__atags_pointer);
+	if (atags_vaddr)
+		tags = atags_vaddr;
 	else if (mdesc->atag_offset)
 		tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
 
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/devtree.c linux-libre-5.10.108-gnu1/arch/arm/kernel/devtree.c
index 7f0745a97e20..28311dd0fee6 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/devtree.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/devtree.c
@@ -203,12 +203,12 @@ static const void * __init arch_get_next_mach(const char *const **match)
 
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
- * @dt_phys: physical address of dt blob
+ * @dt_virt: virtual address of dt blob
  *
  * If a dtb was passed to the kernel in r2, then use it to choose the
  * correct machine_desc and to setup the system.
  */
-const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
+const struct machine_desc * __init setup_machine_fdt(void *dt_virt)
 {
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
 
@@ -221,7 +221,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 	mdesc_best = &__mach_desc_GENERIC_DT;
 #endif
 
-	if (!dt_phys || !early_init_dt_verify(phys_to_virt(dt_phys)))
+	if (!dt_virt || !early_init_dt_verify(dt_virt))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/entry-armv.S linux-libre-5.10.108-gnu1/arch/arm/kernel/entry-armv.S
index 55a47df04773..c3ebe3584103 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/entry-armv.S
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/entry-armv.S
@@ -252,31 +252,10 @@ __und_svc:
 #else
 	svc_entry
 #endif
-	@
-	@ call emulation code, which returns using r9 if it has emulated
-	@ the instruction, or the more conventional lr if we are to treat
-	@ this as a real undefined instruction
-	@
-	@  r0 - instruction
-	@
-#ifndef CONFIG_THUMB2_KERNEL
-	ldr	r0, [r4, #-4]
-#else
-	mov	r1, #2
-	ldrh	r0, [r4, #-2]			@ Thumb instruction at LR - 2
-	cmp	r0, #0xe800			@ 32-bit instruction if xx >= 0
-	blo	__und_svc_fault
-	ldrh	r9, [r4]			@ bottom 16 bits
-	add	r4, r4, #2
-	str	r4, [sp, #S_PC]
-	orr	r0, r9, r0, lsl #16
-#endif
-	badr	r9, __und_svc_finish
-	mov	r2, r4
-	bl	call_fpe
 
 	mov	r1, #4				@ PC correction to apply
-__und_svc_fault:
+ THUMB(	tst	r5, #PSR_T_BIT		)	@ exception taken in Thumb mode?
+ THUMB(	movne	r1, #2			)	@ if so, fix up PC correction
 	mov	r0, sp				@ struct pt_regs *regs
 	bl	__und_fault
 
@@ -617,11 +596,9 @@ call_fpe:
 	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
 	reteq	lr
 	and	r8, r0, #0x00000f00		@ mask out CP number
- THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
-	add	r6, r10, #TI_USED_CP
- ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
- THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
+	add	r6, r10, r8, lsr #8		@ add used_cp[] array offset first
+	strb	r7, [r6, #TI_USED_CP]		@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -630,7 +607,7 @@ call_fpe:
 	bcs	iwmmxt_task_enable
 #endif
  ARM(	add	pc, pc, r8, lsr #6	)
- THUMB(	lsl	r8, r8, #2		)
+ THUMB(	lsr	r8, r8, #6		)
  THUMB(	add	pc, r8			)
 	nop
 
@@ -1028,12 +1005,11 @@ vector_\name:
 	sub	lr, lr, #\correction
 	.endif
 
-	@
-	@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
-	@ (parent CPSR)
-	@
+	@ Save r0, lr_<exception> (parent PC)
 	stmia	sp, {r0, lr}		@ save r0, lr
-	mrs	lr, spsr
+
+	@ Save spsr_<exception> (parent CPSR)
+2:	mrs	lr, spsr
 	str	lr, [sp, #8]		@ save spsr
 
 	@
@@ -1054,6 +1030,44 @@ vector_\name:
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.subsection 1
+	.align 5
+vector_bhb_loop8_\name:
+	.if \correction
+	sub	lr, lr, #\correction
+	.endif
+
+	@ Save r0, lr_<exception> (parent PC)
+	stmia	sp, {r0, lr}
+
+	@ bhb workaround
+	mov	r0, #8
+3:	b	. + 4
+	subs	r0, r0, #1
+	bne	3b
+	dsb
+	isb
+	b	2b
+ENDPROC(vector_bhb_loop8_\name)
+
+vector_bhb_bpiall_\name:
+	.if \correction
+	sub	lr, lr, #\correction
+	.endif
+
+	@ Save r0, lr_<exception> (parent PC)
+	stmia	sp, {r0, lr}
+
+	@ bhb workaround
+	mcr	p15, 0, r0, c7, c5, 6	@ BPIALL
+	@ isb not needed due to "movs pc, lr" in the vector stub
+	@ which gives a "context synchronisation".
+	b	2b
+ENDPROC(vector_bhb_bpiall_\name)
+	.previous
+#endif
+
 	.align	2
 	@ handler addresses follow this label
 1:
@@ -1062,6 +1076,10 @@ ENDPROC(vector_\name)
 	.section .stubs, "ax", %progbits
 	@ This must be the first word
 	.word	vector_swi
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.word	vector_bhb_loop8_swi
+	.word	vector_bhb_bpiall_swi
+#endif
 
 vector_rst:
  ARM(	swi	SYS_ERROR0	)
@@ -1176,8 +1194,10 @@ vector_addrexcptn:
  * FIQ "NMI" handler
  *-----------------------------------------------------------------------------
  * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86
- * systems.
+ * systems. This must be the last vector stub, so lets place it in its own
+ * subsection.
  */
+	.subsection 2
 	vector_stub	fiq, FIQ_MODE, 4
 
 	.long	__fiq_usr			@  0  (USR_26 / USR_32)
@@ -1210,6 +1230,30 @@ vector_addrexcptn:
 	W(b)	vector_irq
 	W(b)	vector_fiq
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.section .vectors.bhb.loop8, "ax", %progbits
+.L__vectors_bhb_loop8_start:
+	W(b)	vector_rst
+	W(b)	vector_bhb_loop8_und
+	W(ldr)	pc, .L__vectors_bhb_loop8_start + 0x1004
+	W(b)	vector_bhb_loop8_pabt
+	W(b)	vector_bhb_loop8_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_loop8_irq
+	W(b)	vector_bhb_loop8_fiq
+
+	.section .vectors.bhb.bpiall, "ax", %progbits
+.L__vectors_bhb_bpiall_start:
+	W(b)	vector_rst
+	W(b)	vector_bhb_bpiall_und
+	W(ldr)	pc, .L__vectors_bhb_bpiall_start + 0x1008
+	W(b)	vector_bhb_bpiall_pabt
+	W(b)	vector_bhb_bpiall_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_bpiall_irq
+	W(b)	vector_bhb_bpiall_fiq
+#endif
+
 	.data
 	.align	2
 
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/entry-common.S linux-libre-5.10.108-gnu1/arch/arm/kernel/entry-common.S
index 271cb8a1eba1..bd619da73c84 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/entry-common.S
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/entry-common.S
@@ -162,6 +162,29 @@ ENDPROC(ret_from_fork)
  *-----------------------------------------------------------------------------
  */
 
+	.align	5
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+ENTRY(vector_bhb_loop8_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mov	r8, #8
+1:	b	2f
+2:	subs	r8, r8, #1
+	bne	1b
+	dsb
+	isb
+	b	3f
+ENDPROC(vector_bhb_loop8_swi)
+
+	.align	5
+ENTRY(vector_bhb_bpiall_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mcr	p15, 0, r8, c7, c5, 6	@ BPIALL
+	isb
+	b	3f
+ENDPROC(vector_bhb_bpiall_swi)
+#endif
 	.align	5
 ENTRY(vector_swi)
 #ifdef CONFIG_CPU_V7M
@@ -169,6 +192,7 @@ ENTRY(vector_swi)
 #else
 	sub	sp, sp, #PT_REGS_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
+3:
  ARM(	add	r8, sp, #S_PC		)
  ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
  THUMB(	mov	r8, sp			)
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/ftrace.c linux-libre-5.10.108-gnu1/arch/arm/kernel/ftrace.c
index 9a79ef6b1876..3c83b5d29697 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/ftrace.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/ftrace.c
@@ -68,9 +68,10 @@ int ftrace_arch_code_modify_post_process(void)
 	return 0;
 }
 
-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr,
+					 bool warn)
 {
-	return arm_gen_branch_link(pc, addr);
+	return arm_gen_branch_link(pc, addr, warn);
 }
 
 static int ftrace_modify_code(unsigned long pc, unsigned long old,
@@ -104,14 +105,14 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	int ret;
 
 	pc = (unsigned long)&ftrace_call;
-	new = ftrace_call_replace(pc, (unsigned long)func);
+	new = ftrace_call_replace(pc, (unsigned long)func, true);
 
 	ret = ftrace_modify_code(pc, 0, new, false);
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 	if (!ret) {
 		pc = (unsigned long)&ftrace_regs_call;
-		new = ftrace_call_replace(pc, (unsigned long)func);
+		new = ftrace_call_replace(pc, (unsigned long)func, true);
 
 		ret = ftrace_modify_code(pc, 0, new, false);
 	}
@@ -124,10 +125,22 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	unsigned long new, old;
 	unsigned long ip = rec->ip;
+	unsigned long aaddr = adjust_address(rec, addr);
+	struct module *mod = NULL;
+
+#ifdef CONFIG_ARM_MODULE_PLTS
+	mod = rec->arch.mod;
+#endif
 
 	old = ftrace_nop_replace(rec);
 
-	new = ftrace_call_replace(ip, adjust_address(rec, addr));
+	new = ftrace_call_replace(ip, aaddr, !mod);
+#ifdef CONFIG_ARM_MODULE_PLTS
+	if (!new && mod) {
+		aaddr = get_module_plt(mod, ip, aaddr);
+		new = ftrace_call_replace(ip, aaddr, true);
+	}
+#endif
 
 	return ftrace_modify_code(rec->ip, old, new, true);
 }
@@ -140,9 +153,9 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 	unsigned long new, old;
 	unsigned long ip = rec->ip;
 
-	old = ftrace_call_replace(ip, adjust_address(rec, old_addr));
+	old = ftrace_call_replace(ip, adjust_address(rec, old_addr), true);
 
-	new = ftrace_call_replace(ip, adjust_address(rec, addr));
+	new = ftrace_call_replace(ip, adjust_address(rec, addr), true);
 
 	return ftrace_modify_code(rec->ip, old, new, true);
 }
@@ -152,12 +165,29 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 int ftrace_make_nop(struct module *mod,
 		    struct dyn_ftrace *rec, unsigned long addr)
 {
+	unsigned long aaddr = adjust_address(rec, addr);
 	unsigned long ip = rec->ip;
 	unsigned long old;
 	unsigned long new;
 	int ret;
 
-	old = ftrace_call_replace(ip, adjust_address(rec, addr));
+#ifdef CONFIG_ARM_MODULE_PLTS
+	/* mod is only supplied during module loading */
+	if (!mod)
+		mod = rec->arch.mod;
+	else
+		rec->arch.mod = mod;
+#endif
+
+	old = ftrace_call_replace(ip, aaddr,
+				  !IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || !mod);
+#ifdef CONFIG_ARM_MODULE_PLTS
+	if (!old && mod) {
+		aaddr = get_module_plt(mod, ip, aaddr);
+		old = ftrace_call_replace(ip, aaddr, true);
+	}
+#endif
+
 	new = ftrace_nop_replace(rec);
 	ret = ftrace_modify_code(ip, old, new, true);
 
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/head.S linux-libre-5.10.108-gnu1/arch/arm/kernel/head.S
index f8904227e7fd..4af5c7679624 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/head.S
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/head.S
@@ -274,11 +274,10 @@ __create_page_tables:
 	 * We map 2 sections in case the ATAGs/DTB crosses a section boundary.
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
-	movs	r0, r0, lsl #SECTION_SHIFT
-	subne	r3, r0, r8
-	addne	r3, r3, #PAGE_OFFSET
-	addne	r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
-	orrne	r6, r7, r0
+	cmp	r2, #0
+	ldrne	r3, =FDT_FIXED_BASE >> (SECTION_SHIFT - PMD_ORDER)
+	addne	r3, r3, r4
+	orrne	r6, r7, r0, lsl #SECTION_SHIFT
 	strne	r6, [r3], #1 << PMD_ORDER
 	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]
@@ -671,12 +670,8 @@ ARM_BE8(rev16	ip, ip)
 	ldrcc	r7, [r4], #4	@ use branch for delay slot
 	bcc	1b
 	bx	lr
-#else
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	moveq	r0, #0x00004000	@ set bit 22, mov to mvn instruction
 #else
 	moveq	r0, #0x400000	@ set bit 22, mov to mvn instruction
-#endif
 	b	2f
 1:	ldr	ip, [r7, r3]
 #ifdef CONFIG_CPU_ENDIAN_BE8
@@ -685,7 +680,7 @@ ARM_BE8(rev16	ip, ip)
 	tst	ip, #0x000f0000	@ check the rotation field
 	orrne	ip, ip, r6, lsl #24 @ mask in offset bits 31-24
 	biceq	ip, ip, #0x00004000 @ clear bit 22
-	orreq	ip, ip, r0      @ mask in offset bits 7-0
+	orreq	ip, ip, r0, ror #8  @ mask in offset bits 7-0
 #else
 	bic	ip, ip, #0x000000ff
 	tst	ip, #0xf00	@ check the rotation field
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/hw_breakpoint.c linux-libre-5.10.108-gnu1/arch/arm/kernel/hw_breakpoint.c
index 08660ae9dcbc..b1423fb130ea 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/hw_breakpoint.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/hw_breakpoint.c
@@ -886,7 +886,7 @@ static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
 			info->trigger = addr;
 			pr_debug("breakpoint fired: address = 0x%x\n", addr);
 			perf_bp_event(bp, regs);
-			if (!bp->overflow_handler)
+			if (is_default_overflow_handler(bp))
 				enable_single_step(bp, addr);
 			goto unlock;
 		}
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/insn.c linux-libre-5.10.108-gnu1/arch/arm/kernel/insn.c
index 2e844b70386b..db0acbb7d7a0 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/insn.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/insn.c
@@ -3,8 +3,9 @@
 #include <linux/kernel.h>
 #include <asm/opcodes.h>
 
-static unsigned long
-__arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
+static unsigned long __arm_gen_branch_thumb2(unsigned long pc,
+					     unsigned long addr, bool link,
+					     bool warn)
 {
 	unsigned long s, j1, j2, i1, i2, imm10, imm11;
 	unsigned long first, second;
@@ -12,7 +13,7 @@ __arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
 
 	offset = (long)addr - (long)(pc + 4);
 	if (offset < -16777216 || offset > 16777214) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(warn);
 		return 0;
 	}
 
@@ -33,8 +34,8 @@ __arm_gen_branch_thumb2(unsigned long pc, unsigned long addr, bool link)
 	return __opcode_thumb32_compose(first, second);
 }
 
-static unsigned long
-__arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
+static unsigned long __arm_gen_branch_arm(unsigned long pc, unsigned long addr,
+					  bool link, bool warn)
 {
 	unsigned long opcode = 0xea000000;
 	long offset;
@@ -44,7 +45,7 @@ __arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
 
 	offset = (long)addr - (long)(pc + 8);
 	if (unlikely(offset < -33554432 || offset > 33554428)) {
-		WARN_ON_ONCE(1);
+		WARN_ON_ONCE(warn);
 		return 0;
 	}
 
@@ -54,10 +55,10 @@ __arm_gen_branch_arm(unsigned long pc, unsigned long addr, bool link)
 }
 
 unsigned long
-__arm_gen_branch(unsigned long pc, unsigned long addr, bool link)
+__arm_gen_branch(unsigned long pc, unsigned long addr, bool link, bool warn)
 {
 	if (IS_ENABLED(CONFIG_THUMB2_KERNEL))
-		return __arm_gen_branch_thumb2(pc, addr, link);
+		return __arm_gen_branch_thumb2(pc, addr, link, warn);
 	else
-		return __arm_gen_branch_arm(pc, addr, link);
+		return __arm_gen_branch_arm(pc, addr, link, warn);
 }
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/iwmmxt.S linux-libre-5.10.108-gnu1/arch/arm/kernel/iwmmxt.S
index 0dcae787b004..d2b4ac06e4ed 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/iwmmxt.S
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/iwmmxt.S
@@ -16,6 +16,7 @@
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
 #include <asm/assembler.h>
+#include "iwmmxt.h"
 
 #if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
 #define PJ4(code...)		code
@@ -113,33 +114,33 @@ concan_save:
 
 concan_dump:
 
-	wstrw	wCSSF, [r1, #MMX_WCSSF]
-	wstrw	wCASF, [r1, #MMX_WCASF]
-	wstrw	wCGR0, [r1, #MMX_WCGR0]
-	wstrw	wCGR1, [r1, #MMX_WCGR1]
-	wstrw	wCGR2, [r1, #MMX_WCGR2]
-	wstrw	wCGR3, [r1, #MMX_WCGR3]
+	wstrw	wCSSF, r1, MMX_WCSSF
+	wstrw	wCASF, r1, MMX_WCASF
+	wstrw	wCGR0, r1, MMX_WCGR0
+	wstrw	wCGR1, r1, MMX_WCGR1
+	wstrw	wCGR2, r1, MMX_WCGR2
+	wstrw	wCGR3, r1, MMX_WCGR3
 
 1:	@ MUP? wRn
 	tst	r2, #0x2
 	beq	2f
 
-	wstrd	wR0,  [r1, #MMX_WR0]
-	wstrd	wR1,  [r1, #MMX_WR1]
-	wstrd	wR2,  [r1, #MMX_WR2]
-	wstrd	wR3,  [r1, #MMX_WR3]
-	wstrd	wR4,  [r1, #MMX_WR4]
-	wstrd	wR5,  [r1, #MMX_WR5]
-	wstrd	wR6,  [r1, #MMX_WR6]
-	wstrd	wR7,  [r1, #MMX_WR7]
-	wstrd	wR8,  [r1, #MMX_WR8]
-	wstrd	wR9,  [r1, #MMX_WR9]
-	wstrd	wR10, [r1, #MMX_WR10]
-	wstrd	wR11, [r1, #MMX_WR11]
-	wstrd	wR12, [r1, #MMX_WR12]
-	wstrd	wR13, [r1, #MMX_WR13]
-	wstrd	wR14, [r1, #MMX_WR14]
-	wstrd	wR15, [r1, #MMX_WR15]
+	wstrd	wR0,  r1, MMX_WR0
+	wstrd	wR1,  r1, MMX_WR1
+	wstrd	wR2,  r1, MMX_WR2
+	wstrd	wR3,  r1, MMX_WR3
+	wstrd	wR4,  r1, MMX_WR4
+	wstrd	wR5,  r1, MMX_WR5
+	wstrd	wR6,  r1, MMX_WR6
+	wstrd	wR7,  r1, MMX_WR7
+	wstrd	wR8,  r1, MMX_WR8
+	wstrd	wR9,  r1, MMX_WR9
+	wstrd	wR10, r1, MMX_WR10
+	wstrd	wR11, r1, MMX_WR11
+	wstrd	wR12, r1, MMX_WR12
+	wstrd	wR13, r1, MMX_WR13
+	wstrd	wR14, r1, MMX_WR14
+	wstrd	wR15, r1, MMX_WR15
 
 2:	teq	r0, #0				@ anything to load?
 	reteq	lr				@ if not, return
@@ -147,30 +148,30 @@ concan_dump:
 concan_load:
 
 	@ Load wRn
-	wldrd	wR0,  [r0, #MMX_WR0]
-	wldrd	wR1,  [r0, #MMX_WR1]
-	wldrd	wR2,  [r0, #MMX_WR2]
-	wldrd	wR3,  [r0, #MMX_WR3]
-	wldrd	wR4,  [r0, #MMX_WR4]
-	wldrd	wR5,  [r0, #MMX_WR5]
-	wldrd	wR6,  [r0, #MMX_WR6]
-	wldrd	wR7,  [r0, #MMX_WR7]
-	wldrd	wR8,  [r0, #MMX_WR8]
-	wldrd	wR9,  [r0, #MMX_WR9]
-	wldrd	wR10, [r0, #MMX_WR10]
-	wldrd	wR11, [r0, #MMX_WR11]
-	wldrd	wR12, [r0, #MMX_WR12]
-	wldrd	wR13, [r0, #MMX_WR13]
-	wldrd	wR14, [r0, #MMX_WR14]
-	wldrd	wR15, [r0, #MMX_WR15]
+	wldrd	wR0,  r0, MMX_WR0
+	wldrd	wR1,  r0, MMX_WR1
+	wldrd	wR2,  r0, MMX_WR2
+	wldrd	wR3,  r0, MMX_WR3
+	wldrd	wR4,  r0, MMX_WR4
+	wldrd	wR5,  r0, MMX_WR5
+	wldrd	wR6,  r0, MMX_WR6
+	wldrd	wR7,  r0, MMX_WR7
+	wldrd	wR8,  r0, MMX_WR8
+	wldrd	wR9,  r0, MMX_WR9
+	wldrd	wR10, r0, MMX_WR10
+	wldrd	wR11, r0, MMX_WR11
+	wldrd	wR12, r0, MMX_WR12
+	wldrd	wR13, r0, MMX_WR13
+	wldrd	wR14, r0, MMX_WR14
+	wldrd	wR15, r0, MMX_WR15
 
 	@ Load wCx
-	wldrw	wCSSF, [r0, #MMX_WCSSF]
-	wldrw	wCASF, [r0, #MMX_WCASF]
-	wldrw	wCGR0, [r0, #MMX_WCGR0]
-	wldrw	wCGR1, [r0, #MMX_WCGR1]
-	wldrw	wCGR2, [r0, #MMX_WCGR2]
-	wldrw	wCGR3, [r0, #MMX_WCGR3]
+	wldrw	wCSSF, r0, MMX_WCSSF
+	wldrw	wCASF, r0, MMX_WCASF
+	wldrw	wCGR0, r0, MMX_WCGR0
+	wldrw	wCGR1, r0, MMX_WCGR1
+	wldrw	wCGR2, r0, MMX_WCGR2
+	wldrw	wCGR3, r0, MMX_WCGR3
 
 	@ clear CUP/MUP (only if r1 != 0)
 	teq	r1, #0
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/iwmmxt.h linux-libre-5.10.108-gnu1/arch/arm/kernel/iwmmxt.h
new file mode 100644
index 000000000000..fb627286f5bb
--- /dev/null
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/iwmmxt.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __IWMMXT_H__
+#define __IWMMXT_H__
+
+.irp b, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+.set .LwR\b, \b
+.set .Lr\b, \b
+.endr
+
+.set .LwCSSF, 0x2
+.set .LwCASF, 0x3
+.set .LwCGR0, 0x8
+.set .LwCGR1, 0x9
+.set .LwCGR2, 0xa
+.set .LwCGR3, 0xb
+
+.macro wldrd, reg:req, base:req, offset:req
+.inst 0xedd00100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2)
+.endm
+
+.macro wldrw, reg:req, base:req, offset:req
+.inst 0xfd900100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2)
+.endm
+
+.macro wstrd, reg:req, base:req, offset:req
+.inst 0xedc00100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2)
+.endm
+
+.macro wstrw, reg:req, base:req, offset:req
+.inst 0xfd800100 | (.L\reg << 12) | (.L\base << 16) | (\offset >> 2)
+.endm
+
+#ifdef __clang__
+
+#define wCon c1
+
+.macro tmrc, dest:req, control:req
+mrc p1, 0, \dest, \control, c0, 0
+.endm
+
+.macro tmcr, control:req, src:req
+mcr p1, 0, \src, \control, c0, 0
+.endm
+#endif
+
+#endif
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/kgdb.c linux-libre-5.10.108-gnu1/arch/arm/kernel/kgdb.c
index 7bd30c0a4280..22f937e6f3ff 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/kgdb.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/kgdb.c
@@ -154,22 +154,38 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
 	return 0;
 }
 
-static struct undef_hook kgdb_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_BREAKINST,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_brk_fn
 };
 
-static struct undef_hook kgdb_compiled_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_BREAKINST & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_COMPILED_BREAK,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_compiled_brk_fn
 };
 
+static struct undef_hook kgdb_compiled_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_COMPILED_BREAK & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_compiled_brk_fn
+};
+
 static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 {
 	struct pt_regs *regs = args->regs;
@@ -210,8 +226,10 @@ int kgdb_arch_init(void)
 	if (ret != 0)
 		return ret;
 
-	register_undef_hook(&kgdb_brkpt_hook);
-	register_undef_hook(&kgdb_compiled_brkpt_hook);
+	register_undef_hook(&kgdb_brkpt_arm_hook);
+	register_undef_hook(&kgdb_brkpt_thumb_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 
 	return 0;
 }
@@ -224,8 +242,10 @@ int kgdb_arch_init(void)
  */
 void kgdb_arch_exit(void)
 {
-	unregister_undef_hook(&kgdb_brkpt_hook);
-	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+	unregister_undef_hook(&kgdb_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_brkpt_thumb_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 	unregister_die_notifier(&kgdb_notifier);
 }
 
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/machine_kexec.c linux-libre-5.10.108-gnu1/arch/arm/kernel/machine_kexec.c
index 5d84ad333f05..2b09dad7935e 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/machine_kexec.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/machine_kexec.c
@@ -13,6 +13,7 @@
 #include <linux/of_fdt.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
+#include <asm/kexec-internal.h>
 #include <asm/fncpy.h>
 #include <asm/mach-types.h>
 #include <asm/smp_plat.h>
@@ -22,11 +23,6 @@
 extern void relocate_new_kernel(void);
 extern const unsigned int relocate_new_kernel_size;
 
-extern unsigned long kexec_start_address;
-extern unsigned long kexec_indirection_page;
-extern unsigned long kexec_mach_type;
-extern unsigned long kexec_boot_atags;
-
 static atomic_t waiting_for_crash_ipi;
 
 /*
@@ -159,6 +155,7 @@ void (*kexec_reinit)(void);
 void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list, reboot_entry_phys;
+	struct kexec_relocate_data *data;
 	void (*reboot_entry)(void);
 	void *reboot_code_buffer;
 
@@ -174,18 +171,17 @@ void machine_kexec(struct kimage *image)
 
 	reboot_code_buffer = page_address(image->control_code_page);
 
-	/* Prepare parameters for reboot_code_buffer*/
-	set_kernel_text_rw();
-	kexec_start_address = image->start;
-	kexec_indirection_page = page_list;
-	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->arch.kernel_r2;
-
 	/* copy our kernel relocation code to the control code page */
 	reboot_entry = fncpy(reboot_code_buffer,
 			     &relocate_new_kernel,
 			     relocate_new_kernel_size);
 
+	data = reboot_code_buffer + relocate_new_kernel_size;
+	data->kexec_start_address = image->start;
+	data->kexec_indirection_page = page_list;
+	data->kexec_mach_type = machine_arch_type;
+	data->kexec_r2 = image->arch.kernel_r2;
+
 	/* get the identity mapping physical address for the reboot code */
 	reboot_entry_phys = virt_to_idmap(reboot_entry);
 
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/module-plts.c linux-libre-5.10.108-gnu1/arch/arm/kernel/module-plts.c
index 6e626abaefc5..1fc309b41f94 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/module-plts.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/module-plts.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/elf.h>
+#include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/sort.h>
@@ -12,10 +13,6 @@
 #include <asm/cache.h>
 #include <asm/opcodes.h>
 
-#define PLT_ENT_STRIDE		L1_CACHE_BYTES
-#define PLT_ENT_COUNT		(PLT_ENT_STRIDE / sizeof(u32))
-#define PLT_ENT_SIZE		(sizeof(struct plt_entries) / PLT_ENT_COUNT)
-
 #ifdef CONFIG_THUMB2_KERNEL
 #define PLT_ENT_LDR		__opcode_to_mem_thumb32(0xf8dff000 | \
 							(PLT_ENT_STRIDE - 4))
@@ -24,9 +21,11 @@
 						    (PLT_ENT_STRIDE - 8))
 #endif
 
-struct plt_entries {
-	u32	ldr[PLT_ENT_COUNT];
-	u32	lit[PLT_ENT_COUNT];
+static const u32 fixed_plts[] = {
+#ifdef CONFIG_DYNAMIC_FTRACE
+	FTRACE_ADDR,
+	MCOUNT_ADDR,
+#endif
 };
 
 static bool in_init(const struct module *mod, unsigned long loc)
@@ -34,14 +33,40 @@ static bool in_init(const struct module *mod, unsigned long loc)
 	return loc - (u32)mod->init_layout.base < mod->init_layout.size;
 }
 
+static void prealloc_fixed(struct mod_plt_sec *pltsec, struct plt_entries *plt)
+{
+	int i;
+
+	if (!ARRAY_SIZE(fixed_plts) || pltsec->plt_count)
+		return;
+	pltsec->plt_count = ARRAY_SIZE(fixed_plts);
+
+	for (i = 0; i < ARRAY_SIZE(plt->ldr); ++i)
+		plt->ldr[i] = PLT_ENT_LDR;
+
+	BUILD_BUG_ON(sizeof(fixed_plts) > sizeof(plt->lit));
+	memcpy(plt->lit, fixed_plts, sizeof(fixed_plts));
+}
+
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
 {
 	struct mod_plt_sec *pltsec = !in_init(mod, loc) ? &mod->arch.core :
 							  &mod->arch.init;
+	struct plt_entries *plt;
+	int idx;
+
+	/* cache the address, ELF header is available only during module load */
+	if (!pltsec->plt_ent)
+		pltsec->plt_ent = (struct plt_entries *)pltsec->plt->sh_addr;
+	plt = pltsec->plt_ent;
 
-	struct plt_entries *plt = (struct plt_entries *)pltsec->plt->sh_addr;
-	int idx = 0;
+	prealloc_fixed(pltsec, plt);
+
+	for (idx = 0; idx < ARRAY_SIZE(fixed_plts); ++idx)
+		if (plt->lit[idx] == val)
+			return (u32)&plt->ldr[idx];
 
+	idx = 0;
 	/*
 	 * Look for an existing entry pointing to 'val'. Given that the
 	 * relocations are sorted, this will be the last entry we allocated.
@@ -189,8 +214,8 @@ static unsigned int count_plts(const Elf32_Sym *syms, Elf32_Addr base,
 int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 			      char *secstrings, struct module *mod)
 {
-	unsigned long core_plts = 0;
-	unsigned long init_plts = 0;
+	unsigned long core_plts = ARRAY_SIZE(fixed_plts);
+	unsigned long init_plts = ARRAY_SIZE(fixed_plts);
 	Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum;
 	Elf32_Sym *syms = NULL;
 
@@ -245,6 +270,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 	mod->arch.core.plt->sh_size = round_up(core_plts * PLT_ENT_SIZE,
 					       sizeof(struct plt_entries));
 	mod->arch.core.plt_count = 0;
+	mod->arch.core.plt_ent = NULL;
 
 	mod->arch.init.plt->sh_type = SHT_NOBITS;
 	mod->arch.init.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
@@ -252,6 +278,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 	mod->arch.init.plt->sh_size = round_up(init_plts * PLT_ENT_SIZE,
 					       sizeof(struct plt_entries));
 	mod->arch.init.plt_count = 0;
+	mod->arch.init.plt_ent = NULL;
 
 	pr_debug("%s: plt=%x, init.plt=%x\n", __func__,
 		 mod->arch.core.plt->sh_size, mod->arch.init.plt->sh_size);
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/perf_callchain.c linux-libre-5.10.108-gnu1/arch/arm/kernel/perf_callchain.c
index 3b69a76d341e..1626dfc6f6ce 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/perf_callchain.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/perf_callchain.c
@@ -62,9 +62,10 @@ user_backtrace(struct frame_tail __user *tail,
 void
 perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	struct frame_tail __user *tail;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+	if (guest_cbs && guest_cbs->is_in_guest()) {
 		/* We don't support guest os callchain now */
 		return;
 	}
@@ -98,9 +99,10 @@ callchain_trace(struct stackframe *fr,
 void
 perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	struct stackframe fr;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+	if (guest_cbs && guest_cbs->is_in_guest()) {
 		/* We don't support guest os callchain now */
 		return;
 	}
@@ -111,18 +113,21 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re
 
 unsigned long perf_instruction_pointer(struct pt_regs *regs)
 {
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
-		return perf_guest_cbs->get_guest_ip();
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
+
+	if (guest_cbs && guest_cbs->is_in_guest())
+		return guest_cbs->get_guest_ip();
 
 	return instruction_pointer(regs);
 }
 
 unsigned long perf_misc_flags(struct pt_regs *regs)
 {
+	struct perf_guest_info_callbacks *guest_cbs = perf_get_guest_cbs();
 	int misc = 0;
 
-	if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
-		if (perf_guest_cbs->is_user_mode())
+	if (guest_cbs && guest_cbs->is_in_guest()) {
+		if (guest_cbs->is_user_mode())
 			misc |= PERF_RECORD_MISC_GUEST_USER;
 		else
 			misc |= PERF_RECORD_MISC_GUEST_KERNEL;
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/perf_event_v7.c linux-libre-5.10.108-gnu1/arch/arm/kernel/perf_event_v7.c
index 2924d7910b10..eb2190477da1 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/perf_event_v7.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/perf_event_v7.c
@@ -773,10 +773,10 @@ static inline void armv7pmu_write_counter(struct perf_event *event, u64 value)
 		pr_err("CPU%u writing wrong counter %d\n",
 			smp_processor_id(), idx);
 	} else if (idx == ARMV7_IDX_CYCLE_COUNTER) {
-		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" ((u32)value));
 	} else {
 		armv7_pmnc_select_counter(idx);
-		asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value));
+		asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" ((u32)value));
 	}
 }
 
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/relocate_kernel.S linux-libre-5.10.108-gnu1/arch/arm/kernel/relocate_kernel.S
index 72a08786e16e..218d524360fc 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/relocate_kernel.S
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/relocate_kernel.S
@@ -5,14 +5,16 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/asm-offsets.h>
 #include <asm/kexec.h>
 
 	.align	3	/* not needed for this code, but keeps fncpy() happy */
 
 ENTRY(relocate_new_kernel)
 
-	ldr	r0,kexec_indirection_page
-	ldr	r1,kexec_start_address
+	adr	r7, relocate_new_kernel_end
+	ldr	r0, [r7, #KEXEC_INDIR_PAGE]
+	ldr	r1, [r7, #KEXEC_START_ADDR]
 
 	/*
 	 * If there is no indirection page (we are doing crashdumps)
@@ -57,34 +59,16 @@ ENTRY(relocate_new_kernel)
 
 2:
 	/* Jump to relocated kernel */
-	mov lr,r1
-	mov r0,#0
-	ldr r1,kexec_mach_type
-	ldr r2,kexec_boot_atags
- ARM(	ret lr	)
- THUMB(	bx lr		)
-
-	.align
-
-	.globl kexec_start_address
-kexec_start_address:
-	.long	0x0
-
-	.globl kexec_indirection_page
-kexec_indirection_page:
-	.long	0x0
-
-	.globl kexec_mach_type
-kexec_mach_type:
-	.long	0x0
-
-	/* phy addr of the atags for the new kernel */
-	.globl kexec_boot_atags
-kexec_boot_atags:
-	.long	0x0
+	mov	lr, r1
+	mov	r0, #0
+	ldr	r1, [r7, #KEXEC_MACH_TYPE]
+	ldr	r2, [r7, #KEXEC_R2]
+ ARM(	ret	lr	)
+ THUMB(	bx	lr	)
 
 ENDPROC(relocate_new_kernel)
 
+	.align	3
 relocate_new_kernel_end:
 
 	.globl relocate_new_kernel_size
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/setup.c linux-libre-5.10.108-gnu1/arch/arm/kernel/setup.c
index 3f65d0ac9f63..b06602cea99c 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/setup.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/setup.c
@@ -18,6 +18,7 @@
 #include <linux/of_platform.h>
 #include <linux/init.h>
 #include <linux/kexec.h>
+#include <linux/libfdt.h>
 #include <linux/of_fdt.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
@@ -543,9 +544,11 @@ void notrace cpu_init(void)
 	 * In Thumb-2, msr with an immediate value is not allowed.
 	 */
 #ifdef CONFIG_THUMB2_KERNEL
-#define PLC	"r"
+#define PLC_l	"l"
+#define PLC_r	"r"
 #else
-#define PLC	"I"
+#define PLC_l	"I"
+#define PLC_r	"I"
 #endif
 
 	/*
@@ -567,15 +570,15 @@ void notrace cpu_init(void)
 	"msr	cpsr_c, %9"
 	    :
 	    : "r" (stk),
-	      PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
 	      "I" (offsetof(struct stack, irq[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
 	      "I" (offsetof(struct stack, abt[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | UND_MODE),
 	      "I" (offsetof(struct stack, und[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | FIQ_MODE),
+	      PLC_r (PSR_F_BIT | PSR_I_BIT | FIQ_MODE),
 	      "I" (offsetof(struct stack, fiq[0])),
-	      PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+	      PLC_l (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
 	    : "r14");
 #endif
 }
@@ -1081,19 +1084,27 @@ void __init hyp_mode_check(void)
 
 void __init setup_arch(char **cmdline_p)
 {
-	const struct machine_desc *mdesc;
+	const struct machine_desc *mdesc = NULL;
+	void *atags_vaddr = NULL;
+
+	if (__atags_pointer)
+		atags_vaddr = FDT_VIRT_BASE(__atags_pointer);
 
 	setup_processor();
-	mdesc = setup_machine_fdt(__atags_pointer);
+	if (atags_vaddr) {
+		mdesc = setup_machine_fdt(atags_vaddr);
+		if (mdesc)
+			memblock_reserve(__atags_pointer,
+					 fdt_totalsize(atags_vaddr));
+	}
 	if (!mdesc)
-		mdesc = setup_machine_tags(__atags_pointer, __machine_arch_type);
+		mdesc = setup_machine_tags(atags_vaddr, __machine_arch_type);
 	if (!mdesc) {
 		early_print("\nError: invalid dtb and unrecognized/unsupported machine ID\n");
 		early_print("  r1=0x%08x, r2=0x%08x\n", __machine_arch_type,
 			    __atags_pointer);
 		if (__atags_pointer)
-			early_print("  r2[]=%*ph\n", 16,
-				    phys_to_virt(__atags_pointer));
+			early_print("  r2[]=%*ph\n", 16, atags_vaddr);
 		dump_machine_table();
 	}
 
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/signal.c linux-libre-5.10.108-gnu1/arch/arm/kernel/signal.c
index 585edbfccf6d..2f81d3af5f9a 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/signal.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/signal.c
@@ -693,18 +693,20 @@ struct page *get_signal_page(void)
 
 	addr = page_address(page);
 
+	/* Poison the entire page */
+	memset32(addr, __opcode_to_mem_arm(0xe7fddef1),
+		 PAGE_SIZE / sizeof(u32));
+
 	/* Give the signal return code some randomness */
 	offset = 0x200 + (get_random_int() & 0x7fc);
 	signal_return_offset = offset;
 
-	/*
-	 * Copy signal return handlers into the vector page, and
-	 * set sigreturn to be a pointer to these.
-	 */
+	/* Copy signal return handlers into the page */
 	memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes));
 
-	ptr = (unsigned long)addr + offset;
-	flush_icache_range(ptr, ptr + sizeof(sigreturn_codes));
+	/* Flush out all instructions in this page */
+	ptr = (unsigned long)addr;
+	flush_icache_range(ptr, ptr + PAGE_SIZE);
 
 	return page;
 }
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/smccc-call.S linux-libre-5.10.108-gnu1/arch/arm/kernel/smccc-call.S
index 00664c78faca..931df62a7831 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/smccc-call.S
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/smccc-call.S
@@ -3,7 +3,9 @@
  * Copyright (c) 2015, Linaro Limited
  */
 #include <linux/linkage.h>
+#include <linux/arm-smccc.h>
 
+#include <asm/asm-offsets.h>
 #include <asm/opcodes-sec.h>
 #include <asm/opcodes-virt.h>
 #include <asm/unwind.h>
@@ -27,7 +29,14 @@ UNWIND(	.fnstart)
 UNWIND(	.save	{r4-r7})
 	ldm	r12, {r4-r7}
 	\instr
-	pop	{r4-r7}
+	ldr	r4, [sp, #36]
+	cmp	r4, #0
+	beq	1f			// No quirk structure
+	ldr     r5, [r4, #ARM_SMCCC_QUIRK_ID_OFFS]
+	cmp     r5, #ARM_SMCCC_QUIRK_QCOM_A6
+	bne	1f			// No quirk present
+	str	r6, [r4, #ARM_SMCCC_QUIRK_STATE_OFFS]
+1:	pop	{r4-r7}
 	ldr	r12, [sp, #(4 * 4)]
 	stm	r12, {r0-r3}
 	bx	lr
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/smp.c linux-libre-5.10.108-gnu1/arch/arm/kernel/smp.c
index 48099c6e1e4a..8aa7fa949c23 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/smp.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/smp.c
@@ -432,7 +432,6 @@ asmlinkage void secondary_start_kernel(void)
 #endif
 	pr_debug("CPU%u: Booted secondary processor\n", cpu);
 
-	preempt_disable();
 	trace_hardirqs_off();
 
 	/*
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/spectre.c linux-libre-5.10.108-gnu1/arch/arm/kernel/spectre.c
new file mode 100644
index 000000000000..0dcefc36fb7a
--- /dev/null
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/spectre.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bpf.h>
+#include <linux/cpu.h>
+#include <linux/device.h>
+
+#include <asm/spectre.h>
+
+static bool _unprivileged_ebpf_enabled(void)
+{
+#ifdef CONFIG_BPF_SYSCALL
+	return !sysctl_unprivileged_bpf_disabled;
+#else
+	return false;
+#endif
+}
+
+ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
+}
+
+static unsigned int spectre_v2_state;
+static unsigned int spectre_v2_methods;
+
+void spectre_v2_update_state(unsigned int state, unsigned int method)
+{
+	if (state > spectre_v2_state)
+		spectre_v2_state = state;
+	spectre_v2_methods |= method;
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	const char *method;
+
+	if (spectre_v2_state == SPECTRE_UNAFFECTED)
+		return sprintf(buf, "%s\n", "Not affected");
+
+	if (spectre_v2_state != SPECTRE_MITIGATED)
+		return sprintf(buf, "%s\n", "Vulnerable");
+
+	if (_unprivileged_ebpf_enabled())
+		return sprintf(buf, "Vulnerable: Unprivileged eBPF enabled\n");
+
+	switch (spectre_v2_methods) {
+	case SPECTRE_V2_METHOD_BPIALL:
+		method = "Branch predictor hardening";
+		break;
+
+	case SPECTRE_V2_METHOD_ICIALLU:
+		method = "I-cache invalidation";
+		break;
+
+	case SPECTRE_V2_METHOD_SMC:
+	case SPECTRE_V2_METHOD_HVC:
+		method = "Firmware call";
+		break;
+
+	case SPECTRE_V2_METHOD_LOOP8:
+		method = "History overwrite";
+		break;
+
+	default:
+		method = "Multiple mitigations";
+		break;
+	}
+
+	return sprintf(buf, "Mitigation: %s\n", method);
+}
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/stacktrace.c linux-libre-5.10.108-gnu1/arch/arm/kernel/stacktrace.c
index 76ea4178a55c..db798eac7431 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/stacktrace.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/stacktrace.c
@@ -54,8 +54,7 @@ int notrace unwind_frame(struct stackframe *frame)
 
 	frame->sp = frame->fp;
 	frame->fp = *(unsigned long *)(fp);
-	frame->pc = frame->lr;
-	frame->lr = *(unsigned long *)(fp + 4);
+	frame->pc = *(unsigned long *)(fp + 4);
 #else
 	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/suspend.c linux-libre-5.10.108-gnu1/arch/arm/kernel/suspend.c
index 24bd20564be7..43f0a3ebf390 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/suspend.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/suspend.c
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <linux/ftrace.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/mm_types.h>
@@ -25,6 +26,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	if (!idmap_pgd)
 		return -EINVAL;
 
+	/*
+	 * Function graph tracer state gets incosistent when the kernel
+	 * calls functions that never return (aka suspend finishers) hence
+	 * disable graph tracing during their execution.
+	 */
+	pause_graph_tracing();
+
 	/*
 	 * Provide a temporary page table with an identity mapping for
 	 * the MMU-enable code, required for resuming.  On successful
@@ -32,6 +40,9 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	 * back to the correct page tables.
 	 */
 	ret = __cpu_suspend(arg, fn, __mpidr);
+
+	unpause_graph_tracing();
+
 	if (ret == 0) {
 		cpu_switch_mm(mm->pgd, mm);
 		local_flush_bp_all();
@@ -45,7 +56,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 {
 	u32 __mpidr = cpu_logical_map(smp_processor_id());
-	return __cpu_suspend(arg, fn, __mpidr);
+	int ret;
+
+	pause_graph_tracing();
+	ret = __cpu_suspend(arg, fn, __mpidr);
+	unpause_graph_tracing();
+
+	return ret;
 }
 #define	idmap_pgd	NULL
 #endif
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/sys_oabi-compat.c linux-libre-5.10.108-gnu1/arch/arm/kernel/sys_oabi-compat.c
index 0203e545bbc8..075a2e0ed2c1 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/sys_oabi-compat.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/sys_oabi-compat.c
@@ -248,6 +248,7 @@ struct oabi_epoll_event {
 	__u64 data;
 } __attribute__ ((packed,aligned(4)));
 
+#ifdef CONFIG_EPOLL
 asmlinkage long sys_oabi_epoll_ctl(int epfd, int op, int fd,
 				   struct oabi_epoll_event __user *event)
 {
@@ -298,6 +299,20 @@ asmlinkage long sys_oabi_epoll_wait(int epfd,
 	kfree(kbuf);
 	return err ? -EFAULT : ret;
 }
+#else
+asmlinkage long sys_oabi_epoll_ctl(int epfd, int op, int fd,
+				   struct oabi_epoll_event __user *event)
+{
+	return -EINVAL;
+}
+
+asmlinkage long sys_oabi_epoll_wait(int epfd,
+				    struct oabi_epoll_event __user *events,
+				    int maxevents, int timeout)
+{
+	return -EINVAL;
+}
+#endif
 
 struct oabi_sembuf {
 	unsigned short	sem_num;
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/traps.c linux-libre-5.10.108-gnu1/arch/arm/kernel/traps.c
index 17d5a785df28..2d9e72ad1b0f 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/traps.c
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <linux/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/exception.h>
+#include <asm/spectre.h>
 #include <asm/unistd.h>
 #include <asm/traps.h>
 #include <asm/ptrace.h>
@@ -806,10 +807,59 @@ static inline void __init kuser_init(void *vectors)
 }
 #endif
 
+#ifndef CONFIG_CPU_V7M
+static void copy_from_lma(void *vma, void *lma_start, void *lma_end)
+{
+	memcpy(vma, lma_start, lma_end - lma_start);
+}
+
+static void flush_vectors(void *vma, size_t offset, size_t size)
+{
+	unsigned long start = (unsigned long)vma + offset;
+	unsigned long end = start + size;
+
+	flush_icache_range(start, end);
+}
+
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+int spectre_bhb_update_vectors(unsigned int method)
+{
+	extern char __vectors_bhb_bpiall_start[], __vectors_bhb_bpiall_end[];
+	extern char __vectors_bhb_loop8_start[], __vectors_bhb_loop8_end[];
+	void *vec_start, *vec_end;
+
+	if (system_state > SYSTEM_SCHEDULING) {
+		pr_err("CPU%u: Spectre BHB workaround too late - system vulnerable\n",
+		       smp_processor_id());
+		return SPECTRE_VULNERABLE;
+	}
+
+	switch (method) {
+	case SPECTRE_V2_METHOD_LOOP8:
+		vec_start = __vectors_bhb_loop8_start;
+		vec_end = __vectors_bhb_loop8_end;
+		break;
+
+	case SPECTRE_V2_METHOD_BPIALL:
+		vec_start = __vectors_bhb_bpiall_start;
+		vec_end = __vectors_bhb_bpiall_end;
+		break;
+
+	default:
+		pr_err("CPU%u: unknown Spectre BHB state %d\n",
+		       smp_processor_id(), method);
+		return SPECTRE_VULNERABLE;
+	}
+
+	copy_from_lma(vectors_page, vec_start, vec_end);
+	flush_vectors(vectors_page, 0, vec_end - vec_start);
+
+	return SPECTRE_MITIGATED;
+}
+#endif
+
 void __init early_trap_init(void *vectors_base)
 {
-#ifndef CONFIG_CPU_V7M
-	unsigned long vectors = (unsigned long)vectors_base;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
 	unsigned i;
@@ -830,17 +880,20 @@ void __init early_trap_init(void *vectors_base)
 	 * into the vector page, mapped at 0xffff0000, and ensure these
 	 * are visible to the instruction stream.
 	 */
-	memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
-	memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start);
+	copy_from_lma(vectors_base, __vectors_start, __vectors_end);
+	copy_from_lma(vectors_base + 0x1000, __stubs_start, __stubs_end);
 
 	kuser_init(vectors_base);
 
-	flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
+	flush_vectors(vectors_base, 0, PAGE_SIZE * 2);
+}
 #else /* ifndef CONFIG_CPU_V7M */
+void __init early_trap_init(void *vectors_base)
+{
 	/*
 	 * on V7-M there is no need to copy the vector table to a dedicated
 	 * memory area. The address is configurable and so a table in the kernel
 	 * image can be used.
 	 */
-#endif
 }
+#endif
diff --git linux-libre-5.10-gnu1/arch/arm/kernel/vmlinux-xip.lds.S linux-libre-5.10.108-gnu1/arch/arm/kernel/vmlinux-xip.lds.S
index 50136828f5b5..f14c2360ea0b 100644
--- linux-libre-5.10-gnu1/arch/arm/kernel/vmlinux-xip.lds.S
+++ linux-libre-5.10.108-gnu1/arch/arm/kernel/vmlinux-xip.lds.S
@@ -40,6 +40,10 @@ SECTIONS
 		ARM_DISCARD
 		*(.alt.smp.init)
 		*(.pv_table)
+#ifndef CONFIG_ARM_UNWIND
+		*(.ARM.exidx) *(.ARM.exidx.*)
+		*(.ARM.extab) *(.ARM.extab.*)
+#endif
 	}
 
 	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
@@ -172,7 +176,7 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
 ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
 #endif
 
-#ifdef CONFIG_ARM_MPU
+#if defined(CONFIG_ARM_MPU) && !defined(CONFIG_COMPILE_TEST)
 /*
  * Due to PMSAv7 restriction on base address and size we have to
  * enforce minimal alignment restrictions. It was seen that weaker
diff --git linux-libre-5.10-gnu1/arch/arm/mach-at91/pm.c linux-libre-5.10.108-gnu1/arch/arm/mach-at91/pm.c
index 120f9aa6fff3..3f015cb6ec2b 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-at91/pm.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-at91/pm.c
@@ -517,18 +517,22 @@ static const struct of_device_id ramc_ids[] __initconst = {
 	{ /*sentinel*/ }
 };
 
-static __init void at91_dt_ramc(void)
+static __init int at91_dt_ramc(void)
 {
 	struct device_node *np;
 	const struct of_device_id *of_id;
 	int idx = 0;
 	void *standby = NULL;
 	const struct ramc_info *ramc;
+	int ret;
 
 	for_each_matching_node_and_match(np, ramc_ids, &of_id) {
 		soc_pm.data.ramc[idx] = of_iomap(np, 0);
-		if (!soc_pm.data.ramc[idx])
-			panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
+		if (!soc_pm.data.ramc[idx]) {
+			pr_err("unable to map ramc[%d] cpu registers\n", idx);
+			ret = -ENOMEM;
+			goto unmap_ramc;
+		}
 
 		ramc = of_id->data;
 		if (!standby)
@@ -538,15 +542,26 @@ static __init void at91_dt_ramc(void)
 		idx++;
 	}
 
-	if (!idx)
-		panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
+	if (!idx) {
+		pr_err("unable to find compatible ram controller node in dtb\n");
+		ret = -ENODEV;
+		goto unmap_ramc;
+	}
 
 	if (!standby) {
 		pr_warn("ramc no standby function available\n");
-		return;
+		return 0;
 	}
 
 	at91_cpuidle_device.dev.platform_data = standby;
+
+	return 0;
+
+unmap_ramc:
+	while (idx)
+		iounmap(soc_pm.data.ramc[--idx]);
+
+	return ret;
 }
 
 static void at91rm9200_idle(void)
@@ -869,6 +884,8 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 
 void __init at91rm9200_pm_init(void)
 {
+	int ret;
+
 	if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
 		return;
 
@@ -880,7 +897,9 @@ void __init at91rm9200_pm_init(void)
 	soc_pm.data.standby_mode = AT91_PM_STANDBY;
 	soc_pm.data.suspend_mode = AT91_PM_ULP0;
 
-	at91_dt_ramc();
+	ret = at91_dt_ramc();
+	if (ret)
+		return;
 
 	/*
 	 * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
@@ -895,13 +914,17 @@ void __init sam9x60_pm_init(void)
 	static const int modes[] __initconst = {
 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
 	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
 	at91_pm_modes_init();
-	at91_dt_ramc();
+	ret = at91_dt_ramc();
+	if (ret)
+		return;
+
 	at91_pm_init(NULL);
 
 	soc_pm.ws_ids = sam9x60_ws_ids;
@@ -910,6 +933,8 @@ void __init sam9x60_pm_init(void)
 
 void __init at91sam9_pm_init(void)
 {
+	int ret;
+
 	if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
 		return;
 
@@ -921,7 +946,10 @@ void __init at91sam9_pm_init(void)
 	soc_pm.data.standby_mode = AT91_PM_STANDBY;
 	soc_pm.data.suspend_mode = AT91_PM_ULP0;
 
-	at91_dt_ramc();
+	ret = at91_dt_ramc();
+	if (ret)
+		return;
+
 	at91_pm_init(at91sam9_idle);
 }
 
@@ -930,12 +958,16 @@ void __init sama5_pm_init(void)
 	static const int modes[] __initconst = {
 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST,
 	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
-	at91_dt_ramc();
+	ret = at91_dt_ramc();
+	if (ret)
+		return;
+
 	at91_pm_init(NULL);
 }
 
@@ -945,13 +977,17 @@ void __init sama5d2_pm_init(void)
 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
 		AT91_PM_BACKUP,
 	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
 	at91_pm_modes_init();
-	at91_dt_ramc();
+	ret = at91_dt_ramc();
+	if (ret)
+		return;
+
 	at91_pm_init(NULL);
 
 	soc_pm.ws_ids = sama5d2_ws_ids;
diff --git linux-libre-5.10-gnu1/arch/arm/mach-at91/pm_suspend.S linux-libre-5.10.108-gnu1/arch/arm/mach-at91/pm_suspend.S
index 0184de05c1be..b683c2caa40b 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-at91/pm_suspend.S
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-at91/pm_suspend.S
@@ -442,7 +442,7 @@ ENDPROC(at91_backup_mode)
 	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
 
 	/* step 2. */
-	ldr	tmp1, =#AT91_PMC_PLL_ACR_DEFAULT_PLLA
+	ldr	tmp1, =AT91_PMC_PLL_ACR_DEFAULT_PLLA
 	str	tmp1, [pmc, #AT91_PMC_PLL_ACR]
 
 	/* step 3. */
diff --git linux-libre-5.10-gnu1/arch/arm/mach-exynos/exynos.c linux-libre-5.10.108-gnu1/arch/arm/mach-exynos/exynos.c
index 700763e07083..83d1d1327f96 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-exynos/exynos.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-exynos/exynos.c
@@ -55,6 +55,7 @@ void __init exynos_sysram_init(void)
 		sysram_base_addr = of_iomap(node, 0);
 		sysram_base_phys = of_translate_address(node,
 					   of_get_address(node, 0, NULL, NULL));
+		of_node_put(node);
 		break;
 	}
 
@@ -62,6 +63,7 @@ void __init exynos_sysram_init(void)
 		if (!of_device_is_available(node))
 			continue;
 		sysram_ns_base_addr = of_iomap(node, 0);
+		of_node_put(node);
 		break;
 	}
 }
diff --git linux-libre-5.10-gnu1/arch/arm/mach-footbridge/cats-pci.c linux-libre-5.10.108-gnu1/arch/arm/mach-footbridge/cats-pci.c
index 0b2fd7e2e9b4..90b1e9be430e 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-footbridge/cats-pci.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-footbridge/cats-pci.c
@@ -15,14 +15,14 @@
 #include <asm/mach-types.h>
 
 /* cats host-specific stuff */
-static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
+static int irqmap_cats[] = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 };
 
 static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin)
 {
 	return 0;
 }
 
-static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->irq >= 255)
 		return -1;	/* not a valid interrupt. */
diff --git linux-libre-5.10-gnu1/arch/arm/mach-footbridge/dc21285.c linux-libre-5.10.108-gnu1/arch/arm/mach-footbridge/dc21285.c
index 416462e3f5d6..f9713dc561cf 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-footbridge/dc21285.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-footbridge/dc21285.c
@@ -65,15 +65,15 @@ dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where,
 	if (addr)
 		switch (size) {
 		case 1:
-			asm("ldrb	%0, [%1, %2]"
+			asm volatile("ldrb	%0, [%1, %2]"
 				: "=r" (v) : "r" (addr), "r" (where) : "cc");
 			break;
 		case 2:
-			asm("ldrh	%0, [%1, %2]"
+			asm volatile("ldrh	%0, [%1, %2]"
 				: "=r" (v) : "r" (addr), "r" (where) : "cc");
 			break;
 		case 4:
-			asm("ldr	%0, [%1, %2]"
+			asm volatile("ldr	%0, [%1, %2]"
 				: "=r" (v) : "r" (addr), "r" (where) : "cc");
 			break;
 		}
@@ -99,17 +99,17 @@ dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	if (addr)
 		switch (size) {
 		case 1:
-			asm("strb	%0, [%1, %2]"
+			asm volatile("strb	%0, [%1, %2]"
 				: : "r" (value), "r" (addr), "r" (where)
 				: "cc");
 			break;
 		case 2:
-			asm("strh	%0, [%1, %2]"
+			asm volatile("strh	%0, [%1, %2]"
 				: : "r" (value), "r" (addr), "r" (where)
 				: "cc");
 			break;
 		case 4:
-			asm("str	%0, [%1, %2]"
+			asm volatile("str	%0, [%1, %2]"
 				: : "r" (value), "r" (addr), "r" (where)
 				: "cc");
 			break;
diff --git linux-libre-5.10-gnu1/arch/arm/mach-footbridge/ebsa285-pci.c linux-libre-5.10.108-gnu1/arch/arm/mach-footbridge/ebsa285-pci.c
index 6f28aaa9ca79..c3f280d08fa7 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-footbridge/ebsa285-pci.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-footbridge/ebsa285-pci.c
@@ -14,9 +14,9 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
-static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
+static int irqmap_ebsa285[] = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI };
 
-static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	if (dev->vendor == PCI_VENDOR_ID_CONTAQ &&
 	    dev->device == PCI_DEVICE_ID_CONTAQ_82C693)
diff --git linux-libre-5.10-gnu1/arch/arm/mach-footbridge/netwinder-pci.c linux-libre-5.10.108-gnu1/arch/arm/mach-footbridge/netwinder-pci.c
index 9473aa0305e5..e8304392074b 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-footbridge/netwinder-pci.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-footbridge/netwinder-pci.c
@@ -18,7 +18,7 @@
  * We now use the slot ID instead of the device identifiers to select
  * which interrupt is routed where.
  */
-static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	switch (slot) {
 	case 0:  /* host bridge */
diff --git linux-libre-5.10-gnu1/arch/arm/mach-footbridge/personal-pci.c linux-libre-5.10.108-gnu1/arch/arm/mach-footbridge/personal-pci.c
index 4391e433a4b2..9d19aa98a663 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-footbridge/personal-pci.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-footbridge/personal-pci.c
@@ -14,13 +14,12 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
-static int irqmap_personal_server[] __initdata = {
+static int irqmap_personal_server[] = {
 	IRQ_IN0, IRQ_IN1, IRQ_IN2, IRQ_IN3, 0, 0, 0,
 	IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI
 };
 
-static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
+static int personal_server_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char line;
 
diff --git linux-libre-5.10-gnu1/arch/arm/mach-imx/mmdc.c linux-libre-5.10.108-gnu1/arch/arm/mach-imx/mmdc.c
index 0dfd0ae7a63d..af12668d0bf5 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-imx/mmdc.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-imx/mmdc.c
@@ -103,6 +103,7 @@ struct mmdc_pmu {
 	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
 	struct hlist_node node;
 	struct fsl_mmdc_devtype_data *devtype_data;
+	struct clk *mmdc_ipg_clk;
 };
 
 /*
@@ -462,11 +463,14 @@ static int imx_mmdc_remove(struct platform_device *pdev)
 
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	perf_pmu_unregister(&pmu_mmdc->pmu);
+	iounmap(pmu_mmdc->mmdc_base);
+	clk_disable_unprepare(pmu_mmdc->mmdc_ipg_clk);
 	kfree(pmu_mmdc);
 	return 0;
 }
 
-static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base)
+static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base,
+			      struct clk *mmdc_ipg_clk)
 {
 	struct mmdc_pmu *pmu_mmdc;
 	char *name;
@@ -494,6 +498,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 	}
 
 	mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
+	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	if (mmdc_num == 0)
 		name = "mmdc";
 	else
@@ -529,7 +534,7 @@ pmu_free:
 
 #else
 #define imx_mmdc_remove NULL
-#define imx_mmdc_perf_init(pdev, mmdc_base) 0
+#define imx_mmdc_perf_init(pdev, mmdc_base, mmdc_ipg_clk) 0
 #endif
 
 static int imx_mmdc_probe(struct platform_device *pdev)
@@ -567,7 +572,13 @@ static int imx_mmdc_probe(struct platform_device *pdev)
 	val &= ~(1 << BP_MMDC_MAPSR_PSD);
 	writel_relaxed(val, reg);
 
-	return imx_mmdc_perf_init(pdev, mmdc_base);
+	err = imx_mmdc_perf_init(pdev, mmdc_base, mmdc_ipg_clk);
+	if (err) {
+		iounmap(mmdc_base);
+		clk_disable_unprepare(mmdc_ipg_clk);
+	}
+
+	return err;
 }
 
 int imx_mmdc_get_ddr_type(void)
diff --git linux-libre-5.10-gnu1/arch/arm/mach-imx/pm-imx6.c linux-libre-5.10.108-gnu1/arch/arm/mach-imx/pm-imx6.c
index 40c74b4c4d73..e24409c1f5d3 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-imx/pm-imx6.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-imx/pm-imx6.c
@@ -9,6 +9,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/genalloc.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <linux/of.h>
@@ -618,6 +619,7 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 
 static void imx6_pm_stby_poweroff(void)
 {
+	gic_cpu_if_down(0);
 	imx6_set_lpm(STOP_POWER_OFF);
 	imx6q_suspend_finish(0);
 
diff --git linux-libre-5.10-gnu1/arch/arm/mach-imx/suspend-imx53.S linux-libre-5.10.108-gnu1/arch/arm/mach-imx/suspend-imx53.S
index 41b8aad65363..46570ec2fbcf 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-imx/suspend-imx53.S
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-imx/suspend-imx53.S
@@ -28,11 +28,11 @@
  *                              ^
  *                              ^
  *                      imx53_suspend code
- *              PM_INFO structure(imx53_suspend_info)
+ *              PM_INFO structure(imx5_cpu_suspend_info)
  * ======================== low address =======================
  */
 
-/* Offsets of members of struct imx53_suspend_info */
+/* Offsets of members of struct imx5_cpu_suspend_info */
 #define SUSPEND_INFO_MX53_M4IF_V_OFFSET		0x0
 #define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET	0x4
 #define SUSPEND_INFO_MX53_IO_COUNT_OFFSET	0x8
diff --git linux-libre-5.10-gnu1/arch/arm/mach-imx/suspend-imx6.S linux-libre-5.10.108-gnu1/arch/arm/mach-imx/suspend-imx6.S
index 1eabf2d2834b..e06f946b75b9 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-imx/suspend-imx6.S
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-imx/suspend-imx6.S
@@ -67,6 +67,7 @@
 #define MX6Q_CCM_CCR	0x0
 
 	.align 3
+	.arm
 
 	.macro  sync_l2_cache
 
diff --git linux-libre-5.10-gnu1/arch/arm/mach-ixp4xx/Kconfig linux-libre-5.10.108-gnu1/arch/arm/mach-ixp4xx/Kconfig
index f7211b57b1e7..165c184801e1 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-ixp4xx/Kconfig
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-ixp4xx/Kconfig
@@ -13,7 +13,6 @@ config MACH_IXP4XX_OF
 	select I2C
 	select I2C_IOP3XX
 	select PCI
-	select TIMER_OF
 	select USE_OF
 	help
 	  Say 'Y' here to support Device Tree-based IXP4xx platforms.
diff --git linux-libre-5.10-gnu1/arch/arm/mach-keystone/keystone.c linux-libre-5.10.108-gnu1/arch/arm/mach-keystone/keystone.c
index 09a65c2dfd73..b8fa01f9516e 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-keystone/keystone.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-keystone/keystone.c
@@ -65,7 +65,7 @@ static void __init keystone_init(void)
 static long long __init keystone_pv_fixup(void)
 {
 	long long offset;
-	phys_addr_t mem_start, mem_end;
+	u64 mem_start, mem_end;
 
 	mem_start = memblock_start_of_DRAM();
 	mem_end = memblock_end_of_DRAM();
@@ -78,7 +78,7 @@ static long long __init keystone_pv_fixup(void)
 	if (mem_start < KEYSTONE_HIGH_PHYS_START ||
 	    mem_end   > KEYSTONE_HIGH_PHYS_END) {
 		pr_crit("Invalid address space for memory (%08llx-%08llx)\n",
-		        (u64)mem_start, (u64)mem_end);
+		        mem_start, mem_end);
 		return 0;
 	}
 
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap1/ams-delta-fiq-handler.S linux-libre-5.10.108-gnu1/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 14a6c3eb3298..f745a65d3bd7 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -15,6 +15,7 @@
 #include <linux/platform_data/gpio-omap.h>
 
 #include <asm/assembler.h>
+#include <asm/irq.h>
 
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap1/board-ams-delta.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap1/board-ams-delta.c
index 2ee527c00284..1026a816dcc0 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap1/board-ams-delta.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap1/board-ams-delta.c
@@ -458,20 +458,6 @@ static struct gpiod_lookup_table leds_gpio_table = {
 
 #ifdef CONFIG_LEDS_TRIGGERS
 DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
-
-static int ams_delta_camera_power(struct device *dev, int power)
-{
-	/*
-	 * turn on camera LED
-	 */
-	if (power)
-		led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
-	else
-		led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
-	return 0;
-}
-#else
-#define ams_delta_camera_power	NULL
 #endif
 
 static struct platform_device ams_delta_audio_device = {
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap1/board-osk.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap1/board-osk.c
index a720259099ed..0a4c9b0b13b0 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap1/board-osk.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap1/board-osk.c
@@ -203,6 +203,8 @@ static int osk_tps_setup(struct i2c_client *client, void *context)
 	 */
 	gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
 	gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
+	/* Free the GPIO again as the driver will request it */
+	gpio_free(OSK_TPS_GPIO_USB_PWR_EN);
 
 	/* Set GPIO 2 high so LED D3 is off by default */
 	tps65010_set_gpio_out_value(GPIO2, HIGH);
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap1/pm.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap1/pm.c
index 2c1e2b32b9b3..a745d64d4699 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap1/pm.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap1/pm.c
@@ -655,9 +655,13 @@ static int __init omap_pm_init(void)
 		irq = INT_7XX_WAKE_UP_REQ;
 	else if (cpu_is_omap16xx())
 		irq = INT_1610_WAKE_UP_REQ;
-	if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup",
-			NULL))
-		pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
+	else
+		irq = -1;
+
+	if (irq >= 0) {
+		if (request_irq(irq, omap_wakeup_interrupt, 0, "peripheral wakeup", NULL))
+			pr_err("Failed to request irq %d (peripheral wakeup)\n", irq);
+	}
 
 	/* Program new power ramp-up time
 	 * (0 for most boards since we don't lower voltage when in deep sleep)
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap2/board-generic.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/board-generic.c
index 7290f033fd2d..1610c567a6a3 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap2/board-generic.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/board-generic.c
@@ -33,7 +33,7 @@ static void __init __maybe_unused omap_generic_init(void)
 }
 
 /* Clocks are needed early, see drivers/clocksource for the rest */
-void __init __maybe_unused omap_init_time_of(void)
+static void __init __maybe_unused omap_init_time_of(void)
 {
 	omap_clk_init();
 	timer_probe();
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap2/board-n8x0.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/board-n8x0.c
index 418a61ecb827..5e86145db0e2 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap2/board-n8x0.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/board-n8x0.c
@@ -322,6 +322,7 @@ static int n8x0_mmc_get_cover_state(struct device *dev, int slot)
 
 static void n8x0_mmc_callback(void *data, u8 card_mask)
 {
+#ifdef CONFIG_MMC_OMAP
 	int bit, *openp, index;
 
 	if (board_is_n800()) {
@@ -339,7 +340,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
-#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
 #else
 	pr_warn("MMC: notify cover event not available\n");
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap2/cpuidle44xx.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/cpuidle44xx.c
index c8d317fafe2e..de37027ad758 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap2/cpuidle44xx.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/cpuidle44xx.c
@@ -151,10 +151,10 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				 (cx->mpu_logic_state == PWRDM_POWER_OFF);
 
 	/* Enter broadcast mode for periodic timers */
-	tick_broadcast_enable();
+	RCU_NONIDLE(tick_broadcast_enable());
 
 	/* Enter broadcast mode for one-shot timers */
-	tick_broadcast_enter();
+	RCU_NONIDLE(tick_broadcast_enter());
 
 	/*
 	 * Call idle CPU PM enter notifier chain so that
@@ -166,7 +166,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 
 	if (dev->cpu == 0) {
 		pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-		omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+		RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
 
 		/*
 		 * Call idle CPU cluster PM enter notifier chain
@@ -178,7 +178,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 				index = 0;
 				cx = state_ptr + index;
 				pwrdm_set_logic_retst(mpu_pd, cx->mpu_logic_state);
-				omap_set_pwrdm_state(mpu_pd, cx->mpu_state);
+				RCU_NONIDLE(omap_set_pwrdm_state(mpu_pd, cx->mpu_state));
 				mpuss_can_lose_context = 0;
 			}
 		}
@@ -194,9 +194,9 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 		    mpuss_can_lose_context)
 			gic_dist_disable();
 
-		clkdm_deny_idle(cpu_clkdm[1]);
-		omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON);
-		clkdm_allow_idle(cpu_clkdm[1]);
+		RCU_NONIDLE(clkdm_deny_idle(cpu_clkdm[1]));
+		RCU_NONIDLE(omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON));
+		RCU_NONIDLE(clkdm_allow_idle(cpu_clkdm[1]));
 
 		if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD) &&
 		    mpuss_can_lose_context) {
@@ -222,7 +222,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	cpu_pm_exit();
 
 cpu_pm_out:
-	tick_broadcast_exit();
+	RCU_NONIDLE(tick_broadcast_exit());
 
 fail:
 	cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap2/display.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/display.c
index 2000fca6bd4e..6098666e928d 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap2/display.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/display.c
@@ -263,9 +263,9 @@ static int __init omapdss_init_of(void)
 	}
 
 	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	put_device(&pdev->dev);
 	if (r) {
 		pr_err("Unable to populate DSS submodule devices\n");
-		put_device(&pdev->dev);
 		return r;
 	}
 
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap2/omap-secure.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/omap-secure.c
index f70d561f37f7..0659ab4cb0af 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap2/omap-secure.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/omap-secure.c
@@ -9,6 +9,7 @@
  */
 
 #include <linux/arm-smccc.h>
+#include <linux/cpu_pm.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -20,6 +21,7 @@
 
 #include "common.h"
 #include "omap-secure.h"
+#include "soc.h"
 
 static phys_addr_t omap_secure_memblock_base;
 
@@ -213,3 +215,40 @@ void __init omap_secure_init(void)
 {
 	omap_optee_init_check();
 }
+
+/*
+ * Dummy dispatcher call after core OSWR and MPU off. Updates the ROM return
+ * address after MMU has been re-enabled after CPU1 has been woken up again.
+ * Otherwise the ROM code will attempt to use the earlier physical return
+ * address that got set with MMU off when waking up CPU1. Only used on secure
+ * devices.
+ */
+static int cpu_notifier(struct notifier_block *nb, unsigned long cmd, void *v)
+{
+	switch (cmd) {
+	case CPU_CLUSTER_PM_EXIT:
+		omap_secure_dispatcher(OMAP4_PPA_SERVICE_0,
+				       FLAG_START_CRITICAL,
+				       0, 0, 0, 0, 0);
+		break;
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block secure_notifier_block = {
+	.notifier_call = cpu_notifier,
+};
+
+static int __init secure_pm_init(void)
+{
+	if (omap_type() == OMAP2_DEVICE_TYPE_GP || !soc_is_omap44xx())
+		return 0;
+
+	cpu_pm_register_notifier(&secure_notifier_block);
+
+	return 0;
+}
+omap_arch_initcall(secure_pm_init);
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap2/omap-secure.h linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/omap-secure.h
index 4aaa95706d39..172069f31616 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap2/omap-secure.h
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/omap-secure.h
@@ -50,6 +50,7 @@
 #define OMAP5_DRA7_MON_SET_ACR_INDEX	0x107
 
 /* Secure PPA(Primary Protected Application) APIs */
+#define OMAP4_PPA_SERVICE_0		0x21
 #define OMAP4_PPA_L2_POR_INDEX		0x23
 #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
 
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap2/omap_device.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/omap_device.c
index fc7bb2ca1672..64b23b0cd23c 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap2/omap_device.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/omap_device.c
@@ -230,10 +230,12 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 		break;
 	case BUS_NOTIFY_BIND_DRIVER:
 		od = to_omap_device(pdev);
-		if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) &&
-		    pm_runtime_status_suspended(dev)) {
+		if (od) {
 			od->_driver_status = BUS_NOTIFY_BIND_DRIVER;
-			pm_runtime_set_active(dev);
+			if (od->_state == OMAP_DEVICE_STATE_ENABLED &&
+			    pm_runtime_status_suspended(dev)) {
+				pm_runtime_set_active(dev);
+			}
 		}
 		break;
 	case BUS_NOTIFY_ADD_DEVICE:
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap2/omap_hwmod.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/omap_hwmod.c
index 15b29a179c8a..1fd67abca055 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap2/omap_hwmod.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/omap_hwmod.c
@@ -749,8 +749,10 @@ static int __init _init_clkctrl_providers(void)
 
 	for_each_matching_node(np, ti_clkctrl_match_table) {
 		ret = _setup_clkctrl_provider(np);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			break;
+		}
 	}
 
 	return ret;
@@ -3618,6 +3620,8 @@ int omap_hwmod_init_module(struct device *dev,
 		oh->flags |= HWMOD_SWSUP_SIDLE_ACT;
 	if (data->cfg->quirks & SYSC_QUIRK_SWSUP_MSTANDBY)
 		oh->flags |= HWMOD_SWSUP_MSTANDBY;
+	if (data->cfg->quirks & SYSC_QUIRK_CLKDM_NOAUTO)
+		oh->flags |= HWMOD_CLKDM_NOAUTO;
 
 	error = omap_hwmod_check_module(dev, oh, data, sysc_fields,
 					rev_offs, sysc_offs, syss_offs,
@@ -3777,6 +3781,7 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 	struct omap_hwmod_ocp_if *oi;
 	struct clockdomain *clkdm;
 	struct clk_hw_omap *clk;
+	struct clk_hw *hw;
 
 	if (!oh)
 		return NULL;
@@ -3793,7 +3798,14 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 		c = oi->_clk;
 	}
 
-	clk = to_clk_hw_omap(__clk_get_hw(c));
+	hw = __clk_get_hw(c);
+	if (!hw)
+		return NULL;
+
+	clk = to_clk_hw_omap(hw);
+	if (!clk)
+		return NULL;
+
 	clkdm = clk->clkdm;
 	if (!clkdm)
 		return NULL;
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap2/pm33xx-core.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/pm33xx-core.c
index 56f2c0bcae5a..e3b783bbc626 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap2/pm33xx-core.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/pm33xx-core.c
@@ -8,6 +8,7 @@
 
 #include <linux/cpuidle.h>
 #include <linux/platform_data/pm33xx.h>
+#include <linux/suspend.h>
 #include <asm/cpuidle.h>
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
@@ -324,6 +325,43 @@ static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void)
 		return NULL;
 }
 
+#ifdef CONFIG_SUSPEND
+/*
+ * Block system suspend initially. Later on pm33xx sets up it's own
+ * platform_suspend_ops after probe. That depends also on loaded
+ * wkup_m3_ipc /*(DEBLOBBED)*/
+static int amx3_suspend_block(suspend_state_t state)
+{
+	pr_warn("PM not initialized for pm33xx, wkup_m3_ipc, or /*(DEBLOBBED)*/\n");
+
+	return -EINVAL;
+}
+
+static int amx3_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static const struct platform_suspend_ops amx3_blocked_pm_ops = {
+	.begin = amx3_suspend_block,
+	.valid = amx3_pm_valid,
+};
+
+static void __init amx3_block_suspend(void)
+{
+	suspend_set_ops(&amx3_blocked_pm_ops);
+}
+#else
+static inline void amx3_block_suspend(void)
+{
+}
+#endif	/* CONFIG_SUSPEND */
+
 int __init amx3_common_pm_init(void)
 {
 	struct am33xx_pm_platform_data *pdata;
@@ -337,6 +375,7 @@ int __init amx3_common_pm_init(void)
 	devinfo.size_data = sizeof(*pdata);
 	devinfo.id = -1;
 	platform_device_register_full(&devinfo);
+	amx3_block_suspend();
 
 	return 0;
 }
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap2/pmic-cpcap.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/pmic-cpcap.c
index eab281a5fc9f..668dc84fd31e 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap2/pmic-cpcap.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/pmic-cpcap.c
@@ -71,7 +71,7 @@ static struct omap_voltdm_pmic omap_cpcap_iva = {
 	.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
 	.vddmin = 900000,
-	.vddmax = 1350000,
+	.vddmax = 1375000,
 	.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr = 0x44,
 	.volt_reg_addr = 0x0,
@@ -246,10 +246,10 @@ int __init omap4_cpcap_init(void)
 	omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu);
 
 	if (of_machine_is_compatible("motorola,droid-bionic")) {
-		voltdm = voltdm_lookup("mpu");
+		voltdm = voltdm_lookup("core");
 		omap_voltage_register_pmic(voltdm, &omap_cpcap_core);
 
-		voltdm = voltdm_lookup("mpu");
+		voltdm = voltdm_lookup("iva");
 		omap_voltage_register_pmic(voltdm, &omap_cpcap_iva);
 	} else {
 		voltdm = voltdm_lookup("core");
diff --git linux-libre-5.10-gnu1/arch/arm/mach-omap2/sr_device.c linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/sr_device.c
index 62df666c2bd0..605925684b0a 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-omap2/sr_device.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-omap2/sr_device.c
@@ -88,34 +88,26 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 
 extern struct omap_sr_data omap_sr_pdata[];
 
-static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
+static int __init sr_init_by_name(const char *name, const char *voltdm)
 {
 	struct omap_sr_data *sr_data = NULL;
 	struct omap_volt_data *volt_data;
-	struct omap_smartreflex_dev_attr *sr_dev_attr;
 	static int i;
 
-	if (!strncmp(oh->name, "smartreflex_mpu_iva", 20) ||
-	    !strncmp(oh->name, "smartreflex_mpu", 16))
+	if (!strncmp(name, "smartreflex_mpu_iva", 20) ||
+	    !strncmp(name, "smartreflex_mpu", 16))
 		sr_data = &omap_sr_pdata[OMAP_SR_MPU];
-	else if (!strncmp(oh->name, "smartreflex_core", 17))
+	else if (!strncmp(name, "smartreflex_core", 17))
 		sr_data = &omap_sr_pdata[OMAP_SR_CORE];
-	else if (!strncmp(oh->name, "smartreflex_iva", 16))
+	else if (!strncmp(name, "smartreflex_iva", 16))
 		sr_data = &omap_sr_pdata[OMAP_SR_IVA];
 
 	if (!sr_data) {
-		pr_err("%s: Unknown instance %s\n", __func__, oh->name);
+		pr_err("%s: Unknown instance %s\n", __func__, name);
 		return -EINVAL;
 	}
 
-	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
-	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
-		pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
-		       __func__, oh->name);
-		goto exit;
-	}
-
-	sr_data->name = oh->name;
+	sr_data->name = name;
 	if (cpu_is_omap343x())
 		sr_data->ip_type = 1;
 	else
@@ -136,10 +128,10 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 		}
 	}
 
-	sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
+	sr_data->voltdm = voltdm_lookup(voltdm);
 	if (!sr_data->voltdm) {
 		pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
-			__func__, sr_dev_attr->sensor_voltdm_name);
+			__func__, voltdm);
 		goto exit;
 	}
 
@@ -160,6 +152,20 @@ exit:
 	return 0;
 }
 
+static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
+{
+	struct omap_smartreflex_dev_attr *sr_dev_attr;
+
+	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
+	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
+		pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
+		       __func__, oh->name);
+		return 0;
+	}
+
+	return sr_init_by_name(oh->name, sr_dev_attr->sensor_voltdm_name);
+}
+
 /*
  * API to be called from board files to enable smartreflex
  * autocompensation at init.
@@ -169,7 +175,42 @@ void __init omap_enable_smartreflex_on_init(void)
 	sr_enable_on_init = true;
 }
 
+static const char * const omap4_sr_instances[] = {
+	"mpu",
+	"iva",
+	"core",
+};
+
+static const char * const dra7_sr_instances[] = {
+	"mpu",
+	"core",
+};
+
 int __init omap_devinit_smartreflex(void)
 {
+	const char * const *sr_inst = NULL;
+	int i, nr_sr = 0;
+
+	if (soc_is_omap44xx()) {
+		sr_inst = omap4_sr_instances;
+		nr_sr = ARRAY_SIZE(omap4_sr_instances);
+
+	} else if (soc_is_dra7xx()) {
+		sr_inst = dra7_sr_instances;
+		nr_sr = ARRAY_SIZE(dra7_sr_instances);
+	}
+
+	if (nr_sr) {
+		const char *name, *voltdm;
+
+		for (i = 0; i < nr_sr; i++) {
+			name = kasprintf(GFP_KERNEL, "smartreflex_%s", sr_inst[i]);
+			voltdm = sr_inst[i];
+			sr_init_by_name(name, voltdm);
+		}
+
+		return 0;
+	}
+
 	return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL);
 }
diff --git linux-libre-5.10-gnu1/arch/arm/mach-s3c/irq-s3c24xx-fiq.S linux-libre-5.10.108-gnu1/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
index b54cbd012241..5d238d9a798e 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
@@ -35,7 +35,6 @@
 	@ and an offset to the irq acknowledgment word
 
 ENTRY(s3c24xx_spi_fiq_rx)
-s3c24xx_spi_fix_rx:
 	.word	fiq_rx_end - fiq_rx_start
 	.word	fiq_rx_irq_ack - fiq_rx_start
 fiq_rx_start:
@@ -49,7 +48,7 @@ fiq_rx_start:
 	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
 
 	subs	fiq_rcount, fiq_rcount, #1
-	subnes	pc, lr, #4		@@ return, still have work to do
+	subsne	pc, lr, #4		@@ return, still have work to do
 
 	@@ set IRQ controller so that next op will trigger IRQ
 	mov	fiq_rtmp, #0
@@ -61,7 +60,6 @@ fiq_rx_irq_ack:
 fiq_rx_end:
 
 ENTRY(s3c24xx_spi_fiq_txrx)
-s3c24xx_spi_fiq_txrx:
 	.word	fiq_txrx_end - fiq_txrx_start
 	.word	fiq_txrx_irq_ack - fiq_txrx_start
 fiq_txrx_start:
@@ -76,7 +74,7 @@ fiq_txrx_start:
 	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
 
 	subs	fiq_rcount, fiq_rcount, #1
-	subnes	pc, lr, #4		@@ return, still have work to do
+	subsne	pc, lr, #4		@@ return, still have work to do
 
 	mov	fiq_rtmp, #0
 	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
@@ -88,7 +86,6 @@ fiq_txrx_irq_ack:
 fiq_txrx_end:
 
 ENTRY(s3c24xx_spi_fiq_tx)
-s3c24xx_spi_fix_tx:
 	.word	fiq_tx_end - fiq_tx_start
 	.word	fiq_tx_irq_ack - fiq_tx_start
 fiq_tx_start:
@@ -101,7 +98,7 @@ fiq_tx_start:
 	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
 
 	subs	fiq_rcount, fiq_rcount, #1
-	subnes	pc, lr, #4		@@ return, still have work to do
+	subsne	pc, lr, #4		@@ return, still have work to do
 
 	mov	fiq_rtmp, #0
 	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
diff --git linux-libre-5.10-gnu1/arch/arm/mach-s3c/irq-s3c24xx.c linux-libre-5.10.108-gnu1/arch/arm/mach-s3c/irq-s3c24xx.c
index 79b5f19af7a5..19fb9bdf446b 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-s3c/irq-s3c24xx.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-s3c/irq-s3c24xx.c
@@ -360,11 +360,25 @@ static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
 asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
 {
 	do {
-		if (likely(s3c_intc[0]))
-			if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
-				continue;
+		/*
+		 * For platform based machines, neither ERR nor NULL can happen here.
+		 * The s3c24xx_handle_irq() will be set as IRQ handler iff this succeeds:
+		 *
+		 *    s3c_intc[0] = s3c24xx_init_intc()
+		 *
+		 * If this fails, the next calls to s3c24xx_init_intc() won't be executed.
+		 *
+		 * For DT machine, s3c_init_intc_of() could set the IRQ handler without
+		 * setting s3c_intc[0] only if it was called with num_ctrl=0. There is no
+		 * such code path, so again the s3c_intc[0] will have a valid pointer if
+		 * set_handle_irq() is called.
+		 *
+		 * Therefore in s3c24xx_handle_irq(), the s3c_intc[0] is always something.
+		 */
+		if (s3c24xx_handle_intc(s3c_intc[0], regs, 0))
+			continue;
 
-		if (s3c_intc[2])
+		if (!IS_ERR_OR_NULL(s3c_intc[2]))
 			if (s3c24xx_handle_intc(s3c_intc[2], regs, 64))
 				continue;
 
diff --git linux-libre-5.10-gnu1/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c linux-libre-5.10.108-gnu1/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index ee949255ced3..09ef73b99dd8 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -154,8 +154,10 @@ static int __init rcar_gen2_regulator_quirk(void)
 		return -ENODEV;
 
 	for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
-		if (!of_device_is_available(np))
+		if (!of_device_is_available(np)) {
+			of_node_put(np);
 			break;
+		}
 
 		ret = of_property_read_u32(np, "reg", &addr);
 		if (ret)	/* Skip invalid entry and continue */
@@ -164,6 +166,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 		quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
 		if (!quirk) {
 			ret = -ENOMEM;
+			of_node_put(np);
 			goto err_mem;
 		}
 
diff --git linux-libre-5.10-gnu1/arch/arm/mach-socfpga/Kconfig linux-libre-5.10.108-gnu1/arch/arm/mach-socfpga/Kconfig
index c3bb68d57cea..b62ae4dafa2e 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-socfpga/Kconfig
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-socfpga/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_SOCFPGA
 	bool "Altera SOCFPGA family"
 	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
@@ -18,6 +19,7 @@ menuconfig ARCH_SOCFPGA
 	select PL310_ERRATA_727915
 	select PL310_ERRATA_753970 if PL310
 	select PL310_ERRATA_769419
+	select RESET_CONTROLLER
 
 if ARCH_SOCFPGA
 config SOCFPGA_SUSPEND
diff --git linux-libre-5.10-gnu1/arch/arm/mach-socfpga/core.h linux-libre-5.10.108-gnu1/arch/arm/mach-socfpga/core.h
index fc2608b18a0d..18f01190dcfd 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-socfpga/core.h
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-socfpga/core.h
@@ -33,7 +33,7 @@ extern void __iomem *sdr_ctl_base_addr;
 u32 socfpga_sdram_self_refresh(u32 sdr_base);
 extern unsigned int socfpga_sdram_self_refresh_sz;
 
-extern char secondary_trampoline, secondary_trampoline_end;
+extern char secondary_trampoline[], secondary_trampoline_end[];
 
 extern unsigned long socfpga_cpu1start_addr;
 
diff --git linux-libre-5.10-gnu1/arch/arm/mach-socfpga/platsmp.c linux-libre-5.10.108-gnu1/arch/arm/mach-socfpga/platsmp.c
index fbb80b883e5d..201191cf68f3 100644
--- linux-libre-5.10-gnu1/arch/arm/mach-socfpga/platsmp.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mach-socfpga/platsmp.c
@@ -20,14 +20,14 @@
 
 static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
 		/* This will put CPU #1 into reset. */
 		writel(RSTMGR_MPUMODRST_CPU1,
 		       rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
 
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
 
 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
@@ -45,12 +45,12 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
+	int trampoline_size = secondary_trampoline_end - secondary_trampoline;
 
 	if (socfpga_cpu1start_addr) {
 		writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
 		       SOCFPGA_A10_RSTMGR_MODMPURST);
-		memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
+		memcpy(phys_to_virt(0), secondary_trampoline, trampoline_size);
 
 		writel(__pa_symbol(secondary_startup),
 		       sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff));
diff --git linux-libre-5.10-gnu1/arch/arm/mm/Kconfig linux-libre-5.10.108-gnu1/arch/arm/mm/Kconfig
index 65e4482e3849..c6bf34a33849 100644
--- linux-libre-5.10-gnu1/arch/arm/mm/Kconfig
+++ linux-libre-5.10.108-gnu1/arch/arm/mm/Kconfig
@@ -743,6 +743,7 @@ config SWP_EMULATE
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
 	depends on ARCH_SUPPORTS_BIG_ENDIAN
+	depends on !LD_IS_LLD
 	help
 	  Say Y if you plan on running a kernel in big-endian mode.
 	  Note that your board must be properly built and your board
@@ -752,7 +753,7 @@ config CPU_BIG_ENDIAN
 config CPU_ENDIAN_BE8
 	bool
 	depends on CPU_BIG_ENDIAN
-	default CPU_V6 || CPU_V6K || CPU_V7
+	default CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M
 	help
 	  Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
 
@@ -832,6 +833,7 @@ config CPU_BPREDICT_DISABLE
 
 config CPU_SPECTRE
 	bool
+	select GENERIC_CPU_VULNERABILITIES
 
 config HARDEN_BRANCH_PREDICTOR
 	bool "Harden the branch predictor against aliasing attacks" if EXPERT
@@ -852,6 +854,16 @@ config HARDEN_BRANCH_PREDICTOR
 
 	   If unsure, say Y.
 
+config HARDEN_BRANCH_HISTORY
+	bool "Harden Spectre style attacks against branch history" if EXPERT
+	depends on CPU_SPECTRE
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  make use of branch history to influence future speculation. When
+	  taking an exception, a sequence of branches overwrites the branch
+	  history, or branch history is invalidated.
+
 config TLS_REG_EMUL
 	bool
 	select NEED_KUSER_HELPERS
diff --git linux-libre-5.10-gnu1/arch/arm/mm/init.c linux-libre-5.10.108-gnu1/arch/arm/mm/init.c
index c23dbf8bebee..15af4dd52426 100644
--- linux-libre-5.10-gnu1/arch/arm/mm/init.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mm/init.c
@@ -125,11 +125,22 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max_low,
 int pfn_valid(unsigned long pfn)
 {
 	phys_addr_t addr = __pfn_to_phys(pfn);
+	unsigned long pageblock_size = PAGE_SIZE * pageblock_nr_pages;
 
 	if (__phys_to_pfn(addr) != pfn)
 		return 0;
 
-	return memblock_is_map_memory(addr);
+	/*
+	 * If address less than pageblock_size bytes away from a present
+	 * memory chunk there still will be a memory map entry for it
+	 * because we round freed memory map to the pageblock boundaries.
+	 */
+	if (memblock_overlaps_region(&memblock.memory,
+				     ALIGN_DOWN(addr, pageblock_size),
+				     pageblock_size))
+		return 1;
+
+	return 0;
 }
 EXPORT_SYMBOL(pfn_valid);
 #endif
@@ -223,7 +234,6 @@ void __init arm_memblock_init(const struct machine_desc *mdesc)
 	if (mdesc->reserve)
 		mdesc->reserve();
 
-	early_init_fdt_reserve_self();
 	early_init_fdt_scan_reserved_mem();
 
 	/* reserve memory for DMA contiguous allocations */
@@ -314,14 +324,14 @@ static void __init free_unused_memmap(void)
 		 */
 		start = min(start,
 				 ALIGN(prev_end, PAGES_PER_SECTION));
-#else
+#endif
 		/*
-		 * Align down here since the VM subsystem insists that the
-		 * memmap entries are valid from the bank start aligned to
-		 * MAX_ORDER_NR_PAGES.
+		 * Align down here since many operations in VM subsystem
+		 * presume that there are no holes in the memory map inside
+		 * a pageblock
 		 */
-		start = round_down(start, MAX_ORDER_NR_PAGES);
-#endif
+		start = round_down(start, pageblock_nr_pages);
+
 		/*
 		 * If we had a previous bank, and there is a space
 		 * between the current bank and the previous, free it.
@@ -330,17 +340,19 @@ static void __init free_unused_memmap(void)
 			free_memmap(prev_end, start);
 
 		/*
-		 * Align up here since the VM subsystem insists that the
-		 * memmap entries are valid from the bank end aligned to
-		 * MAX_ORDER_NR_PAGES.
+		 * Align up here since many operations in VM subsystem
+		 * presume that there are no holes in the memory map inside
+		 * a pageblock
 		 */
-		prev_end = ALIGN(end, MAX_ORDER_NR_PAGES);
+		prev_end = ALIGN(end, pageblock_nr_pages);
 	}
 
 #ifdef CONFIG_SPARSEMEM
-	if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION))
+	if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION)) {
+		prev_end = ALIGN(end, pageblock_nr_pages);
 		free_memmap(prev_end,
 			    ALIGN(prev_end, PAGES_PER_SECTION));
+	}
 #endif
 }
 
@@ -379,7 +391,11 @@ static void __init free_highpages(void)
 void __init mem_init(void)
 {
 #ifdef CONFIG_ARM_LPAE
-	swiotlb_init(1);
+	if (swiotlb_force == SWIOTLB_FORCE ||
+	    max_pfn > arm_dma_pfn_limit)
+		swiotlb_init(1);
+	else
+		swiotlb_force = SWIOTLB_NO_FORCE;
 #endif
 
 	set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
diff --git linux-libre-5.10-gnu1/arch/arm/mm/ioremap.c linux-libre-5.10.108-gnu1/arch/arm/mm/ioremap.c
index 000e8210000b..80fb5a4a5c05 100644
--- linux-libre-5.10-gnu1/arch/arm/mm/ioremap.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mm/ioremap.c
@@ -27,6 +27,7 @@
 #include <linux/vmalloc.h>
 #include <linux/io.h>
 #include <linux/sizes.h>
+#include <linux/memblock.h>
 
 #include <asm/cp15.h>
 #include <asm/cputype.h>
@@ -284,7 +285,8 @@ static void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	 * Don't allow RAM to be mapped with mismatched attributes - this
 	 * causes problems with ARMv6+
 	 */
-	if (WARN_ON(pfn_valid(pfn) && mtype != MT_MEMORY_RW))
+	if (WARN_ON(memblock_is_map_memory(PFN_PHYS(pfn)) &&
+		    mtype != MT_MEMORY_RW))
 		return NULL;
 
 	area = get_vm_area_caller(size, VM_IOREMAP, caller);
diff --git linux-libre-5.10-gnu1/arch/arm/mm/mmu.c linux-libre-5.10.108-gnu1/arch/arm/mm/mmu.c
index ab69250a86bc..3e3001998460 100644
--- linux-libre-5.10-gnu1/arch/arm/mm/mmu.c
+++ linux-libre-5.10.108-gnu1/arch/arm/mm/mmu.c
@@ -39,6 +39,8 @@
 #include "mm.h"
 #include "tcm.h"
 
+extern unsigned long __atags_pointer;
+
 /*
  * empty_zero_page is a special page that is used for
  * zero-initialized data and COW.
@@ -210,12 +212,14 @@ early_param("ecc", early_ecc);
 static int __init early_cachepolicy(char *p)
 {
 	pr_warn("cachepolicy kernel parameter not supported without cp15\n");
+	return 0;
 }
 early_param("cachepolicy", early_cachepolicy);
 
 static int __init noalign_setup(char *__unused)
 {
 	pr_warn("noalign kernel parameter not supported without cp15\n");
+	return 1;
 }
 __setup("noalign", noalign_setup);
 
@@ -389,9 +393,9 @@ void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
 		     FIXADDR_END);
 	BUG_ON(idx >= __end_of_fixed_addresses);
 
-	/* we only support device mappings until pgprot_kernel has been set */
+	/* We support only device mappings before pgprot_kernel is set. */
 	if (WARN_ON(pgprot_val(prot) != pgprot_val(FIXMAP_PAGE_IO) &&
-		    pgprot_val(pgprot_kernel) == 0))
+		    pgprot_val(prot) && pgprot_val(pgprot_kernel) == 0))
 		return;
 
 	if (pgprot_val(prot))
@@ -946,7 +950,7 @@ static void __init create_mapping(struct map_desc *md)
 		return;
 	}
 
-	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+	if (md->type == MT_DEVICE &&
 	    md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
 	    (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
 		pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
@@ -1333,6 +1337,15 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 	for (addr = VMALLOC_START; addr < (FIXADDR_TOP & PMD_MASK); addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
+	if (__atags_pointer) {
+		/* create a read-only mapping of the device tree */
+		map.pfn = __phys_to_pfn(__atags_pointer & SECTION_MASK);
+		map.virtual = FDT_FIXED_BASE;
+		map.length = FDT_FIXED_SIZE;
+		map.type = MT_ROM;
+		create_mapping(&map);
+	}
+
 	/*
 	 * Map the kernel if it is XIP.
 	 * It is always first in the modulearea.
@@ -1489,8 +1502,7 @@ static void __init map_lowmem(void)
 }
 
 #ifdef CONFIG_ARM_PV_FIXUP
-extern unsigned long __atags_pointer;
-typedef void pgtables_remap(long long offset, unsigned long pgd, void *